diff options
Diffstat (limited to 'scripts/kconfig/Makefile')
| -rw-r--r-- | scripts/kconfig/Makefile | 180 |
1 files changed, 100 insertions, 80 deletions
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 75bdf5a..368ae30 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -8,7 +8,7 @@ PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-c ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) else -Kconfig := arch/$(SRCARCH)/Kconfig +Kconfig := Kconfig endif xconfig: $(obj)/qconf @@ -21,44 +21,54 @@ menuconfig: $(obj)/mconf $< $(Kconfig) config: $(obj)/conf - $< $(Kconfig) + $< --oldaskconfig $(Kconfig) nconfig: $(obj)/nconf $< $(Kconfig) oldconfig: $(obj)/conf - $< -o $(Kconfig) + $< --$@ $(Kconfig) silentoldconfig: $(obj)/conf $(Q)mkdir -p include/generated - $< -s $(Kconfig) + $< --$@ $(Kconfig) + +# if no path is given, then use src directory to find file +ifdef LSMOD +LSMOD_F := $(LSMOD) +ifeq ($(findstring /,$(LSMOD)),) + LSMOD_F := $(objtree)/$(LSMOD) +endif +endif localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config - $(Q)if [ -f .config ]; then \ - cmp -s .tmp.config .config || \ - (mv -f .config .config.old.1; \ - mv -f .tmp.config .config; \ - $(obj)/conf -s $(Kconfig); \ - mv -f .config.old.1 .config.old) \ - else \ - mv -f .tmp.config .config; \ - $(obj)/conf -s $(Kconfig); \ + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config + $(Q)if [ -f .config ]; then \ + cmp -s .tmp.config .config || \ + (mv -f .config .config.old.1; \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + mv -f .config.old.1 .config.old) \ + else \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ fi $(Q)rm -f .tmp.config localyesconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config $(Q)sed -i s/=m/=y/ .tmp.config - $(Q)if [ -f .config ]; then \ - cmp -s .tmp.config .config || \ - (mv -f .config .config.old.1; \ - mv -f .tmp.config .config; \ - $(obj)/conf -s $(Kconfig); \ - mv -f .config.old.1 .config.old) \ - else \ - mv -f .tmp.config .config; \ - $(obj)/conf -s $(Kconfig); \ + $(Q)if [ -f .config ]; then \ + cmp -s .tmp.config .config || \ + (mv -f .config .config.old.1; \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + mv -f .config.old.1 .config.old) \ + else \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ fi $(Q)rm -f .tmp.config @@ -85,30 +95,29 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h $(Q)rm -f arch/um/Kconfig.arch $(Q)rm -f $(obj)/config.pot -PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig +PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig -randconfig: $(obj)/conf - $< -r $(Kconfig) +allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf + $< --$@ $(Kconfig) -allyesconfig: $(obj)/conf - $< -y $(Kconfig) +PHONY += listnewconfig oldnoconfig savedefconfig defconfig -allnoconfig: $(obj)/conf - $< -n $(Kconfig) +listnewconfig oldnoconfig: $(obj)/conf + $< --$@ $(Kconfig) -allmodconfig: $(obj)/conf - $< -m $(Kconfig) +savedefconfig: $(obj)/conf + $< --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< -d $(Kconfig) + $< --defconfig $(Kconfig) else @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) endif %_defconfig: $(obj)/conf - $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) # Help text used by make help help: @@ -121,22 +130,23 @@ help: @echo ' localmodconfig - Update current config disabling modules not loaded' @echo ' localyesconfig - Update current config converting local mods to core' @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' - @echo ' randconfig - New config with random answer to all options' - @echo ' defconfig - New config with default answer to all options' - @echo ' allmodconfig - New config selecting modules when possible' - @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' defconfig - New config with default from ARCH supplied defconfig' + @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' @echo ' allnoconfig - New config where all options are answered with no' + @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' allmodconfig - New config selecting modules when possible' + @echo ' alldefconfig - New config with all symbols set to default' + @echo ' randconfig - New config with random answer to all options' + @echo ' listnewconfig - List new options' + @echo ' oldnoconfig - Same as silentoldconfig but set new symbols to n (unset)' # lxdialog stuff check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh # Use recursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) -HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOST_EXTRACFLAGS += -DLOCALE - +HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ + -DLOCALE # =========================================================================== # Shared Makefile for the various kconfig executables: @@ -195,7 +205,7 @@ clean-files += config.pot linux.pot PHONY += $(obj)/dochecklxdialog $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog $(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) + $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) always := dochecklxdialog @@ -209,10 +219,12 @@ HOSTCFLAGS_zconf.tab.o := -I$(src) HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK -HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` +HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ -D LKC_DIRECT_LINK +HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) + HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses $(obj)/qconf.o: $(obj)/.tmp_qtcheck @@ -223,40 +235,48 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # QT needs some extra effort... $(obj)/.tmp_qtcheck: @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ + if ! pkg-config --exists QtCore 2> /dev/null; then \ + echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ + pkg-config --exists qt 2> /dev/null && pkg=qt; \ + pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ + if [ -n "$$pkg" ]; then \ + cflags="\$$(shell pkg-config $$pkg --cflags)"; \ + libs="\$$(shell pkg-config $$pkg --libs)"; \ + moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ + dir="$$(pkg-config $$pkg --variable=prefix)"; \ + else \ + for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ + if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ + done; \ + if [ -z "$$dir" ]; then \ + echo "*"; \ + echo "* Unable to find any QT installation. Please make sure that"; \ + echo "* the QT4 or QT3 development package is correctly installed and"; \ + echo "* either qmake can be found or install pkg-config or set"; \ + echo "* the QTDIR environment variable to the correct location."; \ + echo "*"; \ + false; \ + fi; \ + libpath=$$dir/lib; lib=qt; osdir=""; \ + $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ + osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ + test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ + test -f $$libpath/libqt-mt.so && lib=qt-mt; \ + cflags="-I$$dir/include"; \ + libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ + moc="$$dir/bin/moc"; \ + fi; \ + if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ + echo "*"; \ + echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ + echo "*"; \ + moc="/usr/bin/moc"; \ + fi; \ else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo "*"; \ - echo "* Unable to find the QT3 installation. Please make sure that"; \ - echo "* the QT3 development package is correctly installed and"; \ - echo "* either install pkg-config or set the QTDIR environment"; \ - echo "* variable to the correct location."; \ - echo "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ + cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ + libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ + binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \ + moc="$$binpath/bin/moc"; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ |
