diff options
Diffstat (limited to 'net')
| -rw-r--r-- | net/bluetooth/rfcomm/core.c | 71 | ||||
| -rw-r--r-- | net/bluetooth/rfcomm/tty.c | 197 |
2 files changed, 196 insertions, 72 deletions
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 27bf504..52022cc 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -21,10 +21,6 @@ SOFTWARE IS DISCLAIMED. */ -/* - RPN support - Dirk Husemann <hud@zurich.ibm.com> -*/ - /* * Bluetooth RFCOMM core. * @@ -115,10 +111,10 @@ static void rfcomm_session_del(struct rfcomm_session *s); #define __get_mcc_len(b) ((b & 0xfe) >> 1) /* RPN macros */ -#define __rpn_line_settings(data, stop, parity) ((data & 0x3) | ((stop & 0x1) << 2) | ((parity & 0x3) << 3)) +#define __rpn_line_settings(data, stop, parity) ((data & 0x3) | ((stop & 0x1) << 2) | ((parity & 0x7) << 3)) #define __get_rpn_data_bits(line) ((line) & 0x3) #define __get_rpn_stop_bits(line) (((line) >> 2) & 0x1) -#define __get_rpn_parity(line) (((line) >> 3) & 0x3) +#define __get_rpn_parity(line) (((line) >> 3) & 0x7) static inline void rfcomm_schedule(uint event) { @@ -780,10 +776,10 @@ static int rfcomm_send_pn(struct rfcomm_session *s, int cr, struct rfcomm_dlc *d return rfcomm_send_frame(s, buf, ptr - buf); } -static int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci, - u8 bit_rate, u8 data_bits, u8 stop_bits, - u8 parity, u8 flow_ctrl_settings, - u8 xon_char, u8 xoff_char, u16 param_mask) +int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci, + u8 bit_rate, u8 data_bits, u8 stop_bits, + u8 parity, u8 flow_ctrl_settings, + u8 xon_char, u8 xoff_char, u16 param_mask) { struct rfcomm_hdr *hdr; struct rfcomm_mcc *mcc; @@ -791,9 +787,9 @@ static int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci, u8 buf[16], *ptr = buf; BT_DBG("%p cr %d dlci %d bit_r 0x%x data_b 0x%x stop_b 0x%x parity 0x%x" - "flwc_s 0x%x xon_c 0x%x xoff_c 0x%x p_mask 0x%x", - s, cr, dlci, bit_rate, data_bits, stop_bits, parity, - flow_ctrl_settings, xon_char, xoff_char, param_mask); + " flwc_s 0x%x xon_c 0x%x xoff_c 0x%x p_mask 0x%x", + s, cr, dlci, bit_rate, data_bits, stop_bits, parity, + flow_ctrl_settings, xon_char, xoff_char, param_mask); hdr = (void *) ptr; ptr += sizeof(*hdr); hdr->addr = __addr(s->initiator, 0); @@ -1265,16 +1261,16 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ u8 xon_char = 0; u8 xoff_char = 0; u16 rpn_mask = RFCOMM_RPN_PM_ALL; - - BT_DBG("dlci %d cr %d len 0x%x bitr 0x%x line 0x%x flow 0x%x xonc 0x%x xoffc 0x%x pm 0x%x", - dlci, cr, len, rpn->bit_rate, rpn->line_settings, rpn->flow_ctrl, - rpn->xon_char, rpn->xoff_char, rpn->param_mask); - - if (!cr) + + BT_DBG("dlci %d cr %d len 0x%x bitr 0x%x line 0x%x flow 0x%x xonc 0x%x xoffc 0x%x pm 0x%x", + dlci, cr, len, rpn->bit_rate, rpn->line_settings, rpn->flow_ctrl, + rpn->xon_char, rpn->xoff_char, rpn->param_mask); + + if (!cr) return 0; - + if (len == 1) { - /* request: return default setting */ + /* This is a request, return default settings */ bit_rate = RFCOMM_RPN_BR_115200; data_bits = RFCOMM_RPN_DATA_8; stop_bits = RFCOMM_RPN_STOP_1; @@ -1282,11 +1278,12 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ flow_ctrl = RFCOMM_RPN_FLOW_NONE; xon_char = RFCOMM_RPN_XON_CHAR; xoff_char = RFCOMM_RPN_XOFF_CHAR; - goto rpn_out; } - /* check for sane values: ignore/accept bit_rate, 8 bits, 1 stop bit, no parity, - no flow control lines, normal XON/XOFF chars */ + + /* Check for sane values, ignore/accept bit_rate, 8 bits, 1 stop bit, + * no parity, no flow control lines, normal XON/XOFF chars */ + if (rpn->param_mask & RFCOMM_RPN_PM_BITRATE) { bit_rate = rpn->bit_rate; if (bit_rate != RFCOMM_RPN_BR_115200) { @@ -1295,6 +1292,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_BITRATE; } } + if (rpn->param_mask & RFCOMM_RPN_PM_DATA) { data_bits = __get_rpn_data_bits(rpn->line_settings); if (data_bits != RFCOMM_RPN_DATA_8) { @@ -1303,6 +1301,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_DATA; } } + if (rpn->param_mask & RFCOMM_RPN_PM_STOP) { stop_bits = __get_rpn_stop_bits(rpn->line_settings); if (stop_bits != RFCOMM_RPN_STOP_1) { @@ -1311,6 +1310,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_STOP; } } + if (rpn->param_mask & RFCOMM_RPN_PM_PARITY) { parity = __get_rpn_parity(rpn->line_settings); if (parity != RFCOMM_RPN_PARITY_NONE) { @@ -1319,6 +1319,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_PARITY; } } + if (rpn->param_mask & RFCOMM_RPN_PM_FLOW) { flow_ctrl = rpn->flow_ctrl; if (flow_ctrl != RFCOMM_RPN_FLOW_NONE) { @@ -1327,6 +1328,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_FLOW; } } + if (rpn->param_mask & RFCOMM_RPN_PM_XON) { xon_char = rpn->xon_char; if (xon_char != RFCOMM_RPN_XON_CHAR) { @@ -1335,6 +1337,7 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ rpn_mask ^= RFCOMM_RPN_PM_XON; } } + if (rpn->param_mask & RFCOMM_RPN_PM_XOFF) { xoff_char = rpn->xoff_char; if (xoff_char != RFCOMM_RPN_XOFF_CHAR) { @@ -1345,9 +1348,8 @@ static int rfcomm_recv_rpn(struct rfcomm_session *s, int cr, int len, struct sk_ } rpn_out: - rfcomm_send_rpn(s, 0, dlci, - bit_rate, data_bits, stop_bits, parity, flow_ctrl, - xon_char, xoff_char, rpn_mask); + rfcomm_send_rpn(s, 0, dlci, bit_rate, data_bits, stop_bits, + parity, flow_ctrl, xon_char, xoff_char, rpn_mask); return 0; } @@ -1358,14 +1360,13 @@ static int rfcomm_recv_rls(struct rfcomm_session *s, int cr, struct sk_buff *skb u8 dlci = __get_dlci(rls->dlci); BT_DBG("dlci %d cr %d status 0x%x", dlci, cr, rls->status); - + if (!cr) return 0; - /* FIXME: We should probably do something with this - information here. But for now it's sufficient just - to reply -- Bluetooth 1.1 says it's mandatory to - recognise and respond to RLS */ + /* We should probably do something with this information here. But + * for now it's sufficient just to reply -- Bluetooth 1.1 says it's + * mandatory to recognise and respond to RLS */ rfcomm_send_rls(s, 0, dlci, rls->status); @@ -1381,7 +1382,7 @@ static int rfcomm_recv_msc(struct rfcomm_session *s, int cr, struct sk_buff *skb BT_DBG("dlci %d cr %d v24 0x%x", dlci, cr, msc->v24_sig); d = rfcomm_dlc_get(s, dlci); - if (!d) + if (!d) return 0; if (cr) { @@ -1389,7 +1390,7 @@ static int rfcomm_recv_msc(struct rfcomm_session *s, int cr, struct sk_buff *skb set_bit(RFCOMM_TX_THROTTLED, &d->flags); else clear_bit(RFCOMM_TX_THROTTLED, &d->flags); - + rfcomm_dlc_lock(d); if (d->modem_status) d->modem_status(d, msc->v24_sig); @@ -1398,7 +1399,7 @@ static int rfcomm_recv_msc(struct rfcomm_session *s, int cr, struct sk_buff *skb rfcomm_send_msc(s, 0, dlci, msc->v24_sig); d->mscex |= RFCOMM_MSCEX_RX; - } else + } else d->mscex |= RFCOMM_MSCEX_TX; return 0; diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 67d9dd6..bbc3a44 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -745,20 +745,143 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, struct file *filp, unsigned return -ENOIOCTLCMD; } -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - static void rfcomm_tty_set_termios(struct tty_struct *tty, struct termios *old) { - BT_DBG("tty %p", tty); + struct termios *new = (struct termios *) tty->termios; + int old_baud_rate = tty_termios_baud_rate(old); + int new_baud_rate = tty_termios_baud_rate(new); - if ((tty->termios->c_cflag == old->c_cflag) && - (RELEVANT_IFLAG(tty->termios->c_iflag) == RELEVANT_IFLAG(old->c_iflag))) - return; + u8 baud, data_bits, stop_bits, parity, x_on, x_off; + u16 changes = 0; + + struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; + + BT_DBG("tty %p termios %p", tty, old); + + /* Handle turning off CRTSCTS */ + if ((old->c_cflag & CRTSCTS) && !(new->c_cflag & CRTSCTS)) + BT_DBG("Turning off CRTSCTS unsupported"); + + /* Parity on/off and when on, odd/even */ + if (((old->c_cflag & PARENB) != (new->c_cflag & PARENB)) || + ((old->c_cflag & PARODD) != (new->c_cflag & PARODD)) ) { + changes |= RFCOMM_RPN_PM_PARITY; + BT_DBG("Parity change detected."); + } + + /* Mark and space parity are not supported! */ + if (new->c_cflag & PARENB) { + if (new->c_cflag & PARODD) { + BT_DBG("Parity is ODD"); + parity = RFCOMM_RPN_PARITY_ODD; + } else { + BT_DBG("Parity is EVEN"); + parity = RFCOMM_RPN_PARITY_EVEN; + } + } else { + BT_DBG("Parity is OFF"); + parity = RFCOMM_RPN_PARITY_NONE; + } + + /* Setting the x_on / x_off characters */ + if (old->c_cc[VSTOP] != new->c_cc[VSTOP]) { + BT_DBG("XOFF custom"); + x_on = new->c_cc[VSTOP]; + changes |= RFCOMM_RPN_PM_XON; + } else { + BT_DBG("XOFF default"); + x_on = RFCOMM_RPN_XON_CHAR; + } + + if (old->c_cc[VSTART] != new->c_cc[VSTART]) { + BT_DBG("XON custom"); + x_off = new->c_cc[VSTART]; + changes |= RFCOMM_RPN_PM_XOFF; + } else { + BT_DBG("XON default"); + x_off = RFCOMM_RPN_XOFF_CHAR; + } + + /* Handle setting of stop bits */ + if ((old->c_cflag & CSTOPB) != (new->c_cflag & CSTOPB)) + changes |= RFCOMM_RPN_PM_STOP; + + /* POSIX does not support 1.5 stop bits and RFCOMM does not + * support 2 stop bits. So a request for 2 stop bits gets + * translated to 1.5 stop bits */ + if (new->c_cflag & CSTOPB) { + stop_bits = RFCOMM_RPN_STOP_15; + } else { + stop_bits = RFCOMM_RPN_STOP_1; + } - /* handle turning off CRTSCTS */ - if ((old->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) { - BT_DBG("turning off CRTSCTS"); + /* Handle number of data bits [5-8] */ + if ((old->c_cflag & CSIZE) != (new->c_cflag & CSIZE)) + changes |= RFCOMM_RPN_PM_DATA; + + switch (new->c_cflag & CSIZE) { + case CS5: + data_bits = RFCOMM_RPN_DATA_5; + break; + case CS6: + data_bits = RFCOMM_RPN_DATA_6; + break; + case CS7: + data_bits = RFCOMM_RPN_DATA_7; + break; + case CS8: + data_bits = RFCOMM_RPN_DATA_8; + break; + default: + data_bits = RFCOMM_RPN_DATA_8; + break; } + + /* Handle baudrate settings */ + if (old_baud_rate != new_baud_rate) + changes |= RFCOMM_RPN_PM_BITRATE; + + switch (new_baud_rate) { + case 2400: + baud = RFCOMM_RPN_BR_2400; + break; + case 4800: + baud = RFCOMM_RPN_BR_4800; + break; + case 7200: + baud = RFCOMM_RPN_BR_7200; + break; + case 9600: + baud = RFCOMM_RPN_BR_9600; + break; + case 19200: + baud = RFCOMM_RPN_BR_19200; + break; + case 38400: + baud = RFCOMM_RPN_BR_38400; + break; + case 57600: + baud = RFCOMM_RPN_BR_57600; + break; + case 115200: + baud = RFCOMM_RPN_BR_115200; + break; + case 230400: + baud = RFCOMM_RPN_BR_230400; + break; + default: + /* 9600 is standard accordinag to the RFCOMM specification */ + baud = RFCOMM_RPN_BR_9600; + break; + + } + + if (changes) + rfcomm_send_rpn(dev->dlc->session, 1, dev->dlc->dlci, baud, + data_bits, stop_bits, parity, + RFCOMM_RPN_FLOW_NONE, x_on, x_off, changes); + + return; } static void rfcomm_tty_throttle(struct tty_struct *tty) @@ -766,7 +889,7 @@ static void rfcomm_tty_throttle(struct tty_struct *tty) struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; BT_DBG("tty %p dev %p", tty, dev); - + rfcomm_dlc_throttle(dev->dlc); } @@ -775,7 +898,7 @@ static void rfcomm_tty_unthrottle(struct tty_struct *tty) struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; BT_DBG("tty %p dev %p", tty, dev); - + rfcomm_dlc_unthrottle(dev->dlc); } @@ -846,35 +969,35 @@ static int rfcomm_tty_tiocmget(struct tty_struct *tty, struct file *filp) static int rfcomm_tty_tiocmset(struct tty_struct *tty, struct file *filp, unsigned int set, unsigned int clear) { - struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; - struct rfcomm_dlc *dlc = dev->dlc; - u8 v24_sig; + struct rfcomm_dev *dev = (struct rfcomm_dev *) tty->driver_data; + struct rfcomm_dlc *dlc = dev->dlc; + u8 v24_sig; BT_DBG("tty %p dev %p set 0x%02x clear 0x%02x", tty, dev, set, clear); - rfcomm_dlc_get_modem_status(dlc, &v24_sig); - - if (set & TIOCM_DSR || set & TIOCM_DTR) - v24_sig |= RFCOMM_V24_RTC; - if (set & TIOCM_RTS || set & TIOCM_CTS) - v24_sig |= RFCOMM_V24_RTR; - if (set & TIOCM_RI) - v24_sig |= RFCOMM_V24_IC; - if (set & TIOCM_CD) - v24_sig |= RFCOMM_V24_DV; - - if (clear & TIOCM_DSR || clear & TIOCM_DTR) - v24_sig &= ~RFCOMM_V24_RTC; - if (clear & TIOCM_RTS || clear & TIOCM_CTS) - v24_sig &= ~RFCOMM_V24_RTR; - if (clear & TIOCM_RI) - v24_sig &= ~RFCOMM_V24_IC; - if (clear & TIOCM_CD) - v24_sig &= ~RFCOMM_V24_DV; - - rfcomm_dlc_set_modem_status(dlc, v24_sig); - - return 0; + rfcomm_dlc_get_modem_status(dlc, &v24_sig); + + if (set & TIOCM_DSR || set & TIOCM_DTR) + v24_sig |= RFCOMM_V24_RTC; + if (set & TIOCM_RTS || set & TIOCM_CTS) + v24_sig |= RFCOMM_V24_RTR; + if (set & TIOCM_RI) + v24_sig |= RFCOMM_V24_IC; + if (set & TIOCM_CD) + v24_sig |= RFCOMM_V24_DV; + + if (clear & TIOCM_DSR || clear & TIOCM_DTR) + v24_sig &= ~RFCOMM_V24_RTC; + if (clear & TIOCM_RTS || clear & TIOCM_CTS) + v24_sig &= ~RFCOMM_V24_RTR; + if (clear & TIOCM_RI) + v24_sig &= ~RFCOMM_V24_IC; + if (clear & TIOCM_CD) + v24_sig &= ~RFCOMM_V24_DV; + + rfcomm_dlc_set_modem_status(dlc, v24_sig); + + return 0; } /* ---- TTY structure ---- */ |
