summaryrefslogtreecommitdiffstats
path: root/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'net/wireless')
-rw-r--r--net/wireless/Kconfig24
-rw-r--r--net/wireless/chan.c76
-rw-r--r--net/wireless/mesh.c3
-rw-r--r--net/wireless/nl80211.c11
-rw-r--r--net/wireless/reg.c29
-rw-r--r--net/wireless/reg.h12
-rw-r--r--net/wireless/trace.h11
7 files changed, 154 insertions, 12 deletions
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 2a891bc..405f3c4 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -108,6 +108,30 @@ config CFG80211_REG_CELLULAR_HINTS
feature if you have tested and validated this feature on your
systems.
+config CFG80211_REG_RELAX_NO_IR
+ bool "cfg80211 support for NO_IR relaxation"
+ depends on CFG80211_CERTIFICATION_ONUS
+ ---help---
+ This option enables support for relaxation of the NO_IR flag for
+ situations that certain regulatory bodies have provided clarifications
+ on how relaxation can occur. This feature has an inherent dependency on
+ userspace features which must have been properly tested and as such is
+ not enabled by default.
+
+ A relaxation feature example is allowing the operation of a P2P group
+ owner (GO) on channels marked with NO_IR if there is an additional BSS
+ interface which associated to an AP which userspace assumes or confirms
+ to be an authorized master, i.e., with radar detection support and DFS
+ capabilities. However, note that in order to not create daisy chain
+ scenarios, this relaxation is not allowed in cases that the BSS client
+ is associated to P2P GO and in addition the P2P GO instantiated on
+ a channel due to this relaxation should not allow connection from
+ non P2P clients.
+
+ The regulatory core will apply these relaxations only for drivers that
+ support this feature by declaring the appropriate channel flags and
+ capabilities in their registration flow.
+
config CFG80211_DEFAULT_PS
bool "enable powersave by default"
depends on CFG80211
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 9c9501a..50202af 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -661,15 +661,85 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
}
EXPORT_SYMBOL(cfg80211_chandef_usable);
+/*
+ * For GO only, check if the channel can be used under permissive conditions
+ * mandated by the some regulatory bodies, i.e., the channel is marked with
+ * IEEE80211_CHAN_GO_CONCURRENT and there is an additional station interface
+ * associated to an AP on the same channel or on the same UNII band
+ * (assuming that the AP is an authorized master).
+ */
+static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
+ struct ieee80211_channel *chan)
+{
+ struct wireless_dev *wdev_iter;
+ struct wiphy *wiphy = wiphy_idx_to_wiphy(rdev->wiphy_idx);
+
+ ASSERT_RTNL();
+
+ if (!config_enabled(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
+ !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR) ||
+ !(chan->flags & IEEE80211_CHAN_GO_CONCURRENT))
+ return false;
+
+ /*
+ * Generally, it is possible to rely on another device/driver to allow
+ * the GO concurrent relaxation, however, since the device can further
+ * enforce the relaxation (by doing a similar verifications as this),
+ * and thus fail the GO instantiation, consider only the interfaces of
+ * the current registered device.
+ */
+ list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
+ struct ieee80211_channel *other_chan = NULL;
+ int r1, r2;
+
+ if (wdev_iter->iftype != NL80211_IFTYPE_STATION ||
+ !netif_running(wdev_iter->netdev))
+ continue;
+
+ wdev_lock(wdev_iter);
+ if (wdev_iter->current_bss)
+ other_chan = wdev_iter->current_bss->pub.channel;
+ wdev_unlock(wdev_iter);
+
+ if (!other_chan)
+ continue;
+
+ if (chan == other_chan)
+ return true;
+
+ if (chan->band != IEEE80211_BAND_5GHZ)
+ continue;
+
+ r1 = cfg80211_get_unii(chan->center_freq);
+ r2 = cfg80211_get_unii(other_chan->center_freq);
+
+ if (r1 != -EINVAL && r1 == r2)
+ return true;
+ }
+
+ return false;
+}
+
bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
- struct cfg80211_chan_def *chandef)
+ struct cfg80211_chan_def *chandef,
+ enum nl80211_iftype iftype)
{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
bool res;
u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
- IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_RADAR;
- trace_cfg80211_reg_can_beacon(wiphy, chandef);
+ trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype);
+
+ /*
+ * Under certain conditions suggested by the some regulatory bodies
+ * a GO can operate on channels marked with IEEE80211_NO_IR
+ * so set this flag only if such relaxations are not enabled and
+ * the conditions are not met.
+ */
+ if (iftype != NL80211_IFTYPE_P2P_GO ||
+ !cfg80211_go_permissive_chan(rdev, chandef->chan))
+ prohibited_flags |= IEEE80211_CHAN_NO_IR;
if (cfg80211_chandef_dfs_required(wiphy, chandef) > 0 &&
cfg80211_chandef_dfs_available(wiphy, chandef)) {
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 5af5cc6..7031ee0 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -175,7 +175,8 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
scan_width);
}
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
+ NL80211_IFTYPE_MESH_POINT))
return -EINVAL;
err = cfg80211_chandef_dfs_required(wdev->wiphy, &setup->chandef);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c5ead18..b8d81e4 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1939,7 +1939,7 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
result = -EBUSY;
break;
}
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef)) {
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef, iftype)) {
result = -EINVAL;
break;
}
@@ -3271,7 +3271,8 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
} else if (!nl80211_get_ap_channel(rdev, &params))
return -EINVAL;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &params.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &params.chandef,
+ wdev->iftype))
return -EINVAL;
err = cfg80211_chandef_dfs_required(wdev->wiphy, &params.chandef);
@@ -5941,7 +5942,8 @@ skip_beacons:
if (err)
return err;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &params.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &params.chandef,
+ wdev->iftype))
return -EINVAL;
switch (dev->ieee80211_ptr->iftype) {
@@ -6717,7 +6719,8 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef,
+ NL80211_IFTYPE_ADHOC))
return -EINVAL;
switch (ibss.chandef.width) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 2b8c100..58f48b8 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2616,6 +2616,35 @@ static void reg_timeout_work(struct work_struct *work)
rtnl_unlock();
}
+/*
+ * See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for
+ * UNII band definitions
+ */
+int cfg80211_get_unii(int freq)
+{
+ /* UNII-1 */
+ if (freq >= 5150 && freq <= 5250)
+ return 0;
+
+ /* UNII-2A */
+ if (freq > 5250 && freq <= 5350)
+ return 1;
+
+ /* UNII-2B */
+ if (freq > 5350 && freq <= 5470)
+ return 2;
+
+ /* UNII-2C */
+ if (freq > 5470 && freq <= 5725)
+ return 3;
+
+ /* UNII-3 */
+ if (freq > 5725 && freq <= 5825)
+ return 4;
+
+ return -EINVAL;
+}
+
int __init regulatory_init(void)
{
int err = 0;
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 37c180d..334a53a 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -104,4 +104,16 @@ void regulatory_hint_country_ie(struct wiphy *wiphy,
*/
void regulatory_hint_disconnect(void);
+/**
+ * cfg80211_get_unii - get the U-NII band for the frequency
+ * @freq: the frequency for which we want to get the UNII band.
+
+ * Get a value specifying the U-NII band frequency belongs to.
+ * U-NII bands are defined by the FCC in C.F.R 47 part 15.
+ *
+ * Returns -EINVAL if freq is invalid, 0 for UNII-1, 1 for UNII-2A,
+ * 2 for UNII-2B, 3 for UNII-2C and 4 for UNII-3.
+ */
+int cfg80211_get_unii(int freq);
+
#endif /* __NET_WIRELESS_REG_H */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index aabccf1..47b499f 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2193,18 +2193,21 @@ TRACE_EVENT(cfg80211_cqm_rssi_notify,
);
TRACE_EVENT(cfg80211_reg_can_beacon,
- TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef),
- TP_ARGS(wiphy, chandef),
+ TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef,
+ enum nl80211_iftype iftype),
+ TP_ARGS(wiphy, chandef, iftype),
TP_STRUCT__entry(
WIPHY_ENTRY
CHAN_DEF_ENTRY
+ __field(enum nl80211_iftype, iftype)
),
TP_fast_assign(
WIPHY_ASSIGN;
CHAN_DEF_ASSIGN(chandef);
+ __entry->iftype = iftype;
),
- TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT,
- WIPHY_PR_ARG, CHAN_DEF_PR_ARG)
+ TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT ", iftype=%d",
+ WIPHY_PR_ARG, CHAN_DEF_PR_ARG, __entry->iftype)
);
TRACE_EVENT(cfg80211_chandef_dfs_required,
OpenPOWER on IntegriCloud