1 files changed, 140 insertions, 0 deletions
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
new file mode 100644
index 0000000..e0b9747
--- /dev/null
+++ b/net/wireless/mesh.c
@@ -0,0 +1,140 @@
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "core.h"
+
+/* Default values, timeouts in ms */
+#define MESH_TTL 		31
+#define MESH_DEFAULT_ELEMENT_TTL 31
+#define MESH_MAX_RETR	 	3
+#define MESH_RET_T 		100
+#define MESH_CONF_T 		100
+#define MESH_HOLD_T 		100
+
+#define MESH_PATH_TIMEOUT	5000
+
+/*
+ * Minimum interval between two consecutive PREQs originated by the same
+ * interface
+ */
+#define MESH_PREQ_MIN_INT	10
+#define MESH_DIAM_TRAVERSAL_TIME 50
+
+/*
+ * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
+ * before timing out.  This way it will remain ACTIVE and no data frames
+ * will be unnecessarily held in the pending queue.
+ */
+#define MESH_PATH_REFRESH_TIME			1000
+#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+
+/* Default maximum number of established plinks per interface */
+#define MESH_MAX_ESTAB_PLINKS	32
+
+#define MESH_MAX_PREQ_RETRIES	4
+
+
+const struct mesh_config default_mesh_config = {
+	.dot11MeshRetryTimeout = MESH_RET_T,
+	.dot11MeshConfirmTimeout = MESH_CONF_T,
+	.dot11MeshHoldingTimeout = MESH_HOLD_T,
+	.dot11MeshMaxRetries = MESH_MAX_RETR,
+	.dot11MeshTTL = MESH_TTL,
+	.element_ttl = MESH_DEFAULT_ELEMENT_TTL,
+	.auto_open_plinks = true,
+	.dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
+	.dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
+	.dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
+	.dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
+	.dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
+	.path_refresh_time = MESH_PATH_REFRESH_TIME,
+	.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
+};
+
+
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev,
+			 const u8 *mesh_id, u8 mesh_id_len,
+			 const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct mesh_setup setup = {
+		.mesh_id = mesh_id,
+		.mesh_id_len = mesh_id_len,
+	};
+	int err;
+
+	BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (wdev->mesh_id_len)
+		return -EALREADY;
+
+	if (!mesh_id_len)
+		return -EINVAL;
+
+	if (!rdev->ops->join_mesh)
+		return -EOPNOTSUPP;
+
+	err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, &setup);
+	if (!err) {
+		memcpy(wdev->ssid, mesh_id, mesh_id_len);
+		wdev->mesh_id_len = mesh_id_len;
+	}
+
+	return err;
+}
+
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       const u8 *mesh_id, u8 mesh_id_len,
+		       const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_join_mesh(rdev, dev, mesh_id, mesh_id_len, conf);
+	wdev_unlock(wdev);
+
+	return err;
+}
+
+static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+				 struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->leave_mesh)
+		return -EOPNOTSUPP;
+
+	if (!wdev->mesh_id_len)
+		return -ENOTCONN;
+
+	err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
+	if (!err)
+		wdev->mesh_id_len = 0;
+	return err;
+}
+
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+			struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_leave_mesh(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}