summaryrefslogtreecommitdiffstats
path: root/net/mac80211/iface.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/iface.c')
-rw-r--r--net/mac80211/iface.c54
1 files changed, 44 insertions, 10 deletions
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 8336fee..5abbc3f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -65,7 +65,7 @@ static int ieee80211_open(struct net_device *dev)
struct ieee80211_if_init_conf conf;
u32 changed = 0;
int res;
- bool need_hw_reconfig = 0;
+ u32 hw_reconf_flags = 0;
u8 null_addr[ETH_ALEN] = {0};
/* fail early if user set an invalid address */
@@ -152,7 +152,8 @@ static int ieee80211_open(struct net_device *dev)
res = local->ops->start(local_to_hw(local));
if (res)
goto err_del_bss;
- need_hw_reconfig = 1;
+ /* we're brought up, everything changes */
+ hw_reconf_flags = ~0;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
@@ -198,8 +199,10 @@ static int ieee80211_open(struct net_device *dev)
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
- if (local->monitors == 1)
+ if (local->monitors == 1) {
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
+ hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
+ }
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail++;
@@ -226,8 +229,14 @@ static int ieee80211_open(struct net_device *dev)
if (res)
goto err_stop;
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ local->fif_other_bss++;
+ netif_addr_lock_bh(local->mdev);
+ ieee80211_configure_filter(local);
+ netif_addr_unlock_bh(local->mdev);
+
ieee80211_start_mesh(sdata);
+ }
changed |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, changed);
ieee80211_enable_keys(sdata);
@@ -279,8 +288,8 @@ static int ieee80211_open(struct net_device *dev)
atomic_inc(&local->iff_promiscs);
local->open_count++;
- if (need_hw_reconfig) {
- ieee80211_hw_config(local);
+ if (hw_reconf_flags) {
+ ieee80211_hw_config(local, hw_reconf_flags);
/*
* set default queue parameters so drivers don't
* need to initialise the hardware if the hardware
@@ -322,6 +331,7 @@ static int ieee80211_stop(struct net_device *dev)
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_init_conf conf;
struct sta_info *sta;
+ u32 hw_reconf_flags = 0;
/*
* Stop TX on this interface first.
@@ -405,8 +415,10 @@ static int ieee80211_stop(struct net_device *dev)
}
local->monitors--;
- if (local->monitors == 0)
+ if (local->monitors == 0) {
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
+ hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
+ }
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail--;
@@ -423,7 +435,11 @@ static int ieee80211_stop(struct net_device *dev)
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED;
+ /* Announce that we are leaving the network. */
+ if (sdata->u.sta.state != IEEE80211_STA_MLME_DISABLED)
+ ieee80211_sta_deauthenticate(sdata,
+ WLAN_REASON_DEAUTH_LEAVING);
+
memset(sdata->u.sta.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.sta.timer);
/*
@@ -450,8 +466,15 @@ static int ieee80211_stop(struct net_device *dev)
/* fall through */
case NL80211_IFTYPE_MESH_POINT:
if (ieee80211_vif_is_mesh(&sdata->vif)) {
- /* allmulti is always set on mesh ifaces */
+ /* other_bss and allmulti are always set on mesh
+ * ifaces */
+ local->fif_other_bss--;
atomic_dec(&local->iff_allmultis);
+
+ netif_addr_lock_bh(local->mdev);
+ ieee80211_configure_filter(local);
+ netif_addr_unlock_bh(local->mdev);
+
ieee80211_stop_mesh(sdata);
}
/* fall through */
@@ -504,8 +527,15 @@ static int ieee80211_stop(struct net_device *dev)
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
+
+ /* no reconfiguring after stop! */
+ hw_reconf_flags = 0;
}
+ /* do after stop to avoid reconfiguring when we stop anyway */
+ if (hw_reconf_flags)
+ ieee80211_hw_config(local, hw_reconf_flags);
+
return 0;
}
@@ -668,6 +698,10 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
if (type == sdata->vif.type)
return 0;
+ /* Setting ad-hoc mode on non-IBSS channel is not supported. */
+ if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)
+ return -EOPNOTSUPP;
+
/*
* We could, here, on changes between IBSS/STA/MESH modes,
* invoke an MLME function instead that disassociates etc.
@@ -682,7 +716,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
ieee80211_setup_sdata(sdata, type);
/* reset some values that shouldn't be kept across type changes */
- sdata->bss_conf.basic_rates =
+ sdata->vif.bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
OpenPOWER on IntegriCloud