diff options
Diffstat (limited to 'net/dsa/mv88e6131.c')
-rw-r--r-- | net/dsa/mv88e6131.c | 51 |
1 files changed, 41 insertions, 10 deletions
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c index bb2b41b..45f7411 100644 --- a/net/dsa/mv88e6131.c +++ b/net/dsa/mv88e6131.c @@ -14,6 +14,13 @@ #include "dsa_priv.h" #include "mv88e6xxx.h" +/* + * Switch product IDs + */ +#define ID_6085 0x04a0 +#define ID_6095 0x0950 +#define ID_6131 0x1060 + static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr) { int ret; @@ -21,9 +28,11 @@ static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr) ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); if (ret >= 0) { ret &= 0xfff0; - if (ret == 0x0950) + if (ret == ID_6085) + return "Marvell 88E6085"; + if (ret == ID_6095) return "Marvell 88E6095/88E6095F"; - if (ret == 0x1060) + if (ret == ID_6131) return "Marvell 88E6131"; } @@ -124,7 +133,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) * Ignore removed tag data on doubly tagged packets, disable * flow control messages, force flow control priority to the * highest, and send all special multicast frames to the CPU - * port at the higest priority. + * port at the highest priority. */ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); @@ -164,6 +173,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) static int mv88e6131_setup_port(struct dsa_switch *ds, int p) { + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); int addr = REG_PORT(p); u16 val; @@ -171,10 +181,13 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * MAC Forcing register: don't force link, speed, duplex * or flow control state to any particular values on physical * ports, but force the CPU port and all DSA ports to 1000 Mb/s - * full duplex. + * (100 Mb/s on 6085) full duplex. */ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) - REG_WRITE(addr, 0x01, 0x003e); + if (ps->id == ID_6085) + REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */ + else + REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */ else REG_WRITE(addr, 0x01, 0x0003); @@ -194,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * mode, but do not enable forwarding of unknown unicasts. */ val = 0x0433; - if (p == dsa_upstream_port(ds)) + if (p == dsa_upstream_port(ds)) { val |= 0x0104; + /* + * On 6085, unknown multicast forward is controlled + * here rather than in Port Control 2 register. + */ + if (ps->id == ID_6085) + val |= 0x0008; + } if (ds->dsa_port_mask & (1 << p)) val |= 0x0100; REG_WRITE(addr, 0x04, val); @@ -238,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * If this is the upstream port for this switch, enable * forwarding of unknown multicast addresses. */ - val = 0x0080 | dsa_upstream_port(ds); - if (p == dsa_upstream_port(ds)) - val |= 0x0040; - REG_WRITE(addr, 0x08, val); + if (ps->id == ID_6085) + /* + * on 6085, bits 3:0 are reserved, bit 6 control ARP + * mirroring, and multicast forward is handled in + * Port Control register. + */ + REG_WRITE(addr, 0x08, 0x0080); + else { + val = 0x0080 | dsa_upstream_port(ds); + if (p == dsa_upstream_port(ds)) + val |= 0x0040; + REG_WRITE(addr, 0x08, val); + } /* * Rate Control: disable ingress rate limiting. @@ -286,6 +315,8 @@ static int mv88e6131_setup(struct dsa_switch *ds) mv88e6xxx_ppu_state_init(ds); mutex_init(&ps->stats_mutex); + ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0; + ret = mv88e6131_switch_reset(ds); if (ret < 0) return ret; |