diff options
Diffstat (limited to 'mm')
| -rw-r--r-- | mm/Makefile | 2 | ||||
| -rw-r--r-- | mm/memcontrol.c | 29 | ||||
| -rw-r--r-- | mm/vmpressure.c | 374 | ||||
| -rw-r--r-- | mm/vmscan.c | 8 |
4 files changed, 412 insertions, 1 deletions
diff --git a/mm/Makefile b/mm/Makefile index 3a46287..72c5acb 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -50,7 +50,7 @@ obj-$(CONFIG_FS_XIP) += filemap_xip.o obj-$(CONFIG_MIGRATION) += migrate.o obj-$(CONFIG_QUICKLIST) += quicklist.o obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o -obj-$(CONFIG_MEMCG) += memcontrol.o page_cgroup.o +obj-$(CONFIG_MEMCG) += memcontrol.o page_cgroup.o vmpressure.o obj-$(CONFIG_CGROUP_HUGETLB) += hugetlb_cgroup.o obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 7e5bc43..360464f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -49,6 +49,7 @@ #include <linux/fs.h> #include <linux/seq_file.h> #include <linux/vmalloc.h> +#include <linux/vmpressure.h> #include <linux/mm_inline.h> #include <linux/page_cgroup.h> #include <linux/cpu.h> @@ -261,6 +262,9 @@ struct mem_cgroup { */ struct res_counter res; + /* vmpressure notifications */ + struct vmpressure vmpressure; + union { /* * the counter to account for mem+swap usage. @@ -359,6 +363,7 @@ struct mem_cgroup { atomic_t numainfo_events; atomic_t numainfo_updating; #endif + /* * Per cgroup active and inactive list, similar to the * per zone LRU lists. @@ -510,6 +515,24 @@ struct mem_cgroup *mem_cgroup_from_css(struct cgroup_subsys_state *s) return container_of(s, struct mem_cgroup, css); } +/* Some nice accessors for the vmpressure. */ +struct vmpressure *memcg_to_vmpressure(struct mem_cgroup *memcg) +{ + if (!memcg) + memcg = root_mem_cgroup; + return &memcg->vmpressure; +} + +struct cgroup_subsys_state *vmpressure_to_css(struct vmpressure *vmpr) +{ + return &container_of(vmpr, struct mem_cgroup, vmpressure)->css; +} + +struct vmpressure *css_to_vmpressure(struct cgroup_subsys_state *css) +{ + return &mem_cgroup_from_css(css)->vmpressure; +} + static inline bool mem_cgroup_is_root(struct mem_cgroup *memcg) { return (memcg == root_mem_cgroup); @@ -5907,6 +5930,11 @@ static struct cftype mem_cgroup_files[] = { .unregister_event = mem_cgroup_oom_unregister_event, .private = MEMFILE_PRIVATE(_OOM_TYPE, OOM_CONTROL), }, + { + .name = "pressure_level", + .register_event = vmpressure_register_event, + .unregister_event = vmpressure_unregister_event, + }, #ifdef CONFIG_NUMA { .name = "numa_stat", @@ -6188,6 +6216,7 @@ mem_cgroup_css_alloc(struct cgroup *cont) memcg->move_charge_at_immigrate = 0; mutex_init(&memcg->thresholds_lock); spin_lock_init(&memcg->move_lock); + vmpressure_init(&memcg->vmpressure); return &memcg->css; diff --git a/mm/vmpressure.c b/mm/vmpressure.c new file mode 100644 index 0000000..736a601 --- /dev/null +++ b/mm/vmpressure.c @@ -0,0 +1,374 @@ +/* + * Linux VM pressure + * + * Copyright 2012 Linaro Ltd. + * Anton Vorontsov <anton.vorontsov@linaro.org> + * + * Based on ideas from Andrew Morton, David Rientjes, KOSAKI Motohiro, + * Leonid Moiseichuk, Mel Gorman, Minchan Kim and Pekka Enberg. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/cgroup.h> +#include <linux/fs.h> +#include <linux/log2.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmstat.h> +#include <linux/eventfd.h> +#include <linux/swap.h> +#include <linux/printk.h> +#include <linux/vmpressure.h> + +/* + * The window size (vmpressure_win) is the number of scanned pages before + * we try to analyze scanned/reclaimed ratio. So the window is used as a + * rate-limit tunable for the "low" level notification, and also for + * averaging the ratio for medium/critical levels. Using small window + * sizes can cause lot of false positives, but too big window size will + * delay the notifications. + * + * As the vmscan reclaimer logic works with chunks which are multiple of + * SWAP_CLUSTER_MAX, it makes sense to use it for the window size as well. + * + * TODO: Make the window size depend on machine size, as we do for vmstat + * thresholds. Currently we set it to 512 pages (2MB for 4KB pages). + */ +static const unsigned long vmpressure_win = SWAP_CLUSTER_MAX * 16; + +/* + * These thresholds are used when we account memory pressure through + * scanned/reclaimed ratio. The current values were chosen empirically. In + * essence, they are percents: the higher the value, the more number + * unsuccessful reclaims there were. + */ +static const unsigned int vmpressure_level_med = 60; +static const unsigned int vmpressure_level_critical = 95; + +/* + * When there are too little pages left to scan, vmpressure() may miss the + * critical pressure as number of pages will be less than "window size". + * However, in that case the vmscan priority will raise fast as the + * reclaimer will try to scan LRUs more deeply. + * + * The vmscan logic considers these special priorities: + * + * prio == DEF_PRIORITY (12): reclaimer starts with that value + * prio <= DEF_PRIORITY - 2 : kswapd becomes somewhat overwhelmed + * prio == 0 : close to OOM, kernel scans every page in an lru + * + * Any value in this range is acceptable for this tunable (i.e. from 12 to + * 0). Current value for the vmpressure_level_critical_prio is chosen + * empirically, but the number, in essence, means that we consider + * critical level when scanning depth is ~10% of the lru size (vmscan + * scans 'lru_size >> prio' pages, so it is actually 12.5%, or one + * eights). + */ +static const unsigned int vmpressure_level_critical_prio = ilog2(100 / 10); + +static struct vmpressure *work_to_vmpressure(struct work_struct *work) +{ + return container_of(work, struct vmpressure, work); +} + +static struct vmpressure *cg_to_vmpressure(struct cgroup *cg) +{ + return css_to_vmpressure(cgroup_subsys_state(cg, mem_cgroup_subsys_id)); +} + +static struct vmpressure *vmpressure_parent(struct vmpressure *vmpr) +{ + struct cgroup *cg = vmpressure_to_css(vmpr)->cgroup; + struct mem_cgroup *memcg = mem_cgroup_from_cont(cg); + + memcg = parent_mem_cgroup(memcg); + if (!memcg) + return NULL; + return memcg_to_vmpressure(memcg); +} + +enum vmpressure_levels { + VMPRESSURE_LOW = 0, + VMPRESSURE_MEDIUM, + VMPRESSURE_CRITICAL, + VMPRESSURE_NUM_LEVELS, +}; + +static const char * const vmpressure_str_levels[] = { + [VMPRESSURE_LOW] = "low", + [VMPRESSURE_MEDIUM] = "medium", + [VMPRESSURE_CRITICAL] = "critical", +}; + +static enum vmpressure_levels vmpressure_level(unsigned long pressure) +{ + if (pressure >= vmpressure_level_critical) + return VMPRESSURE_CRITICAL; + else if (pressure >= vmpressure_level_med) + return VMPRESSURE_MEDIUM; + return VMPRESSURE_LOW; +} + +static enum vmpressure_levels vmpressure_calc_level(unsigned long scanned, + unsigned long reclaimed) +{ + unsigned long scale = scanned + reclaimed; + unsigned long pressure; + + /* + * We calculate the ratio (in percents) of how many pages were + * scanned vs. reclaimed in a given time frame (window). Note that + * time is in VM reclaimer's "ticks", i.e. number of pages + * scanned. This makes it possible to set desired reaction time + * and serves as a ratelimit. + */ + pressure = scale - (reclaimed * scale / scanned); + pressure = pressure * 100 / scale; + + pr_debug("%s: %3lu (s: %lu r: %lu)\n", __func__, pressure, + scanned, reclaimed); + + return vmpressure_level(pressure); +} + +struct vmpressure_event { + struct eventfd_ctx *efd; + enum vmpressure_levels level; + struct list_head node; +}; + +static bool vmpressure_event(struct vmpressure *vmpr, + unsigned long scanned, unsigned long reclaimed) +{ + struct vmpressure_event *ev; + enum vmpressure_levels level; + bool signalled = false; + + level = vmpressure_calc_level(scanned, reclaimed); + + mutex_lock(&vmpr->events_lock); + + list_for_each_entry(ev, &vmpr->events, node) { + if (level >= ev->level) { + eventfd_signal(ev->efd, 1); + signalled = true; + } + } + + mutex_unlock(&vmpr->events_lock); + + return signalled; +} + +static void vmpressure_work_fn(struct work_struct *work) +{ + struct vmpressure *vmpr = work_to_vmpressure(work); + unsigned long scanned; + unsigned long reclaimed; + + /* + * Several contexts might be calling vmpressure(), so it is + * possible that the work was rescheduled again before the old + * work context cleared the counters. In that case we will run + * just after the old work returns, but then scanned might be zero + * here. No need for any locks here since we don't care if + * vmpr->reclaimed is in sync. + */ + if (!vmpr->scanned) + return; + + mutex_lock(&vmpr->sr_lock); + scanned = vmpr->scanned; + reclaimed = vmpr->reclaimed; + vmpr->scanned = 0; + vmpr->reclaimed = 0; + mutex_unlock(&vmpr->sr_lock); + + do { + if (vmpressure_event(vmpr, scanned, reclaimed)) + break; + /* + * If not handled, propagate the event upward into the + * hierarchy. + */ + } while ((vmpr = vmpressure_parent(vmpr))); +} + +/** + * vmpressure() - Account memory pressure through scanned/reclaimed ratio + * @gfp: reclaimer's gfp mask + * @memcg: cgroup memory controller handle + * @scanned: number of pages scanned + * @reclaimed: number of pages reclaimed + * + * This function should be called from the vmscan reclaim path to account + * "instantaneous" memory pressure (scanned/reclaimed ratio). The raw + * pressure index is then further refined and averaged over time. + * + * This function does not return any value. + */ +void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, + unsigned long scanned, unsigned long reclaimed) +{ + struct vmpressure *vmpr = memcg_to_vmpressure(memcg); + + /* + * Here we only want to account pressure that userland is able to + * help us with. For example, suppose that DMA zone is under + * pressure; if we notify userland about that kind of pressure, + * then it will be mostly a waste as it will trigger unnecessary + * freeing of memory by userland (since userland is more likely to + * have HIGHMEM/MOVABLE pages instead of the DMA fallback). That + * is why we include only movable, highmem and FS/IO pages. + * Indirect reclaim (kswapd) sets sc->gfp_mask to GFP_KERNEL, so + * we account it too. + */ + if (!(gfp & (__GFP_HIGHMEM | __GFP_MOVABLE | __GFP_IO | __GFP_FS))) + return; + + /* + * If we got here with no pages scanned, then that is an indicator + * that reclaimer was unable to find any shrinkable LRUs at the + * current scanning depth. But it does not mean that we should + * report the critical pressure, yet. If the scanning priority + * (scanning depth) goes too high (deep), we will be notified + * through vmpressure_prio(). But so far, keep calm. + */ + if (!scanned) + return; + + mutex_lock(&vmpr->sr_lock); + vmpr->scanned += scanned; + vmpr->reclaimed += reclaimed; + scanned = vmpr->scanned; + mutex_unlock(&vmpr->sr_lock); + + if (scanned < vmpressure_win || work_pending(&vmpr->work)) + return; + schedule_work(&vmpr->work); +} + +/** + * vmpressure_prio() - Account memory pressure through reclaimer priority level + * @gfp: reclaimer's gfp mask + * @memcg: cgroup memory controller handle + * @prio: reclaimer's priority + * + * This function should be called from the reclaim path every time when + * the vmscan's reclaiming priority (scanning depth) changes. + * + * This function does not return any value. + */ +void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio) +{ + /* + * We only use prio for accounting critical level. For more info + * see comment for vmpressure_level_critical_prio variable above. + */ + if (prio > vmpressure_level_critical_prio) + return; + + /* + * OK, the prio is below the threshold, updating vmpressure + * information before shrinker dives into long shrinking of long + * range vmscan. Passing scanned = vmpressure_win, reclaimed = 0 + * to the vmpressure() basically means that we signal 'critical' + * level. + */ + vmpressure(gfp, memcg, vmpressure_win, 0); +} + +/** + * vmpressure_register_event() - Bind vmpressure notifications to an eventfd + * @cg: cgroup that is interested in vmpressure notifications + * @cft: cgroup control files handle + * @eventfd: eventfd context to link notifications with + * @args: event arguments (used to set up a pressure level threshold) + * + * This function associates eventfd context with the vmpressure + * infrastructure, so that the notifications will be delivered to the + * @eventfd. The @args parameter is a string that denotes pressure level + * threshold (one of vmpressure_str_levels, i.e. "low", "medium", or + * "critical"). + * + * This function should not be used directly, just pass it to (struct + * cftype).register_event, and then cgroup core will handle everything by + * itself. + */ +int vmpressure_register_event(struct cgroup *cg, struct cftype *cft, + struct eventfd_ctx *eventfd, const char *args) +{ + struct vmpressure *vmpr = cg_to_vmpressure(cg); + struct vmpressure_event *ev; + int level; + + for (level = 0; level < VMPRESSURE_NUM_LEVELS; level++) { + if (!strcmp(vmpressure_str_levels[level], args)) + break; + } + + if (level >= VMPRESSURE_NUM_LEVELS) + return -EINVAL; + + ev = kzalloc(sizeof(*ev), GFP_KERNEL); + if (!ev) + return -ENOMEM; + + ev->efd = eventfd; + ev->level = level; + + mutex_lock(&vmpr->events_lock); + list_add(&ev->node, &vmpr->events); + mutex_unlock(&vmpr->events_lock); + + return 0; +} + +/** + * vmpressure_unregister_event() - Unbind eventfd from vmpressure + * @cg: cgroup handle + * @cft: cgroup control files handle + * @eventfd: eventfd context that was used to link vmpressure with the @cg + * + * This function does internal manipulations to detach the @eventfd from + * the vmpressure notifications, and then frees internal resources + * associated with the @eventfd (but the @eventfd itself is not freed). + * + * This function should not be used directly, just pass it to (struct + * cftype).unregister_event, and then cgroup core will handle everything + * by itself. + */ +void vmpressure_unregister_event(struct cgroup *cg, struct cftype *cft, + struct eventfd_ctx *eventfd) +{ + struct vmpressure *vmpr = cg_to_vmpressure(cg); + struct vmpressure_event *ev; + + mutex_lock(&vmpr->events_lock); + list_for_each_entry(ev, &vmpr->events, node) { + if (ev->efd != eventfd) + continue; + list_del(&ev->node); + kfree(ev); + break; + } + mutex_unlock(&vmpr->events_lock); +} + +/** + * vmpressure_init() - Initialize vmpressure control structure + * @vmpr: Structure to be initialized + * + * This function should be called on every allocated vmpressure structure + * before any usage. + */ +void vmpressure_init(struct vmpressure *vmpr) +{ + mutex_init(&vmpr->sr_lock); + mutex_init(&vmpr->events_lock); + INIT_LIST_HEAD(&vmpr->events); + INIT_WORK(&vmpr->work, vmpressure_work_fn); +} diff --git a/mm/vmscan.c b/mm/vmscan.c index e03a00b..e53e495 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -19,6 +19,7 @@ #include <linux/pagemap.h> #include <linux/init.h> #include <linux/highmem.h> +#include <linux/vmpressure.h> #include <linux/vmstat.h> #include <linux/file.h> #include <linux/writeback.h> @@ -1982,6 +1983,11 @@ static void shrink_zone(struct zone *zone, struct scan_control *sc) } memcg = mem_cgroup_iter(root, memcg, &reclaim); } while (memcg); + + vmpressure(sc->gfp_mask, sc->target_mem_cgroup, + sc->nr_scanned - nr_scanned, + sc->nr_reclaimed - nr_reclaimed); + } while (should_continue_reclaim(zone, sc->nr_reclaimed - nr_reclaimed, sc->nr_scanned - nr_scanned, sc)); } @@ -2167,6 +2173,8 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, count_vm_event(ALLOCSTALL); do { + vmpressure_prio(sc->gfp_mask, sc->target_mem_cgroup, + sc->priority); sc->nr_scanned = 0; aborted_reclaim = shrink_zones(zonelist, sc); |
