diff options
Diffstat (limited to 'kernel/timer.c')
| -rw-r--r-- | kernel/timer.c | 169 |
1 files changed, 155 insertions, 14 deletions
diff --git a/kernel/timer.c b/kernel/timer.c index c1c7fbc..c2a8ccf 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -80,6 +80,138 @@ tvec_base_t boot_tvec_bases; EXPORT_SYMBOL(boot_tvec_bases); static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases; +/** + * __round_jiffies - function to round jiffies to a full second + * @j: the time in (absolute) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * __round_jiffies rounds an absolute time in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The exact rounding is skewed for each processor to avoid all + * processors firing at the exact same time, which could lead + * to lock contention or spurious cache line bouncing. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long __round_jiffies(unsigned long j, int cpu) +{ + int rem; + unsigned long original = j; + + /* + * We don't want all cpus firing their timers at once hitting the + * same lock or cachelines, so we skew each extra cpu with an extra + * 3 jiffies. This 3 jiffies came originally from the mm/ code which + * already did this. + * The skew is done by adding 3*cpunr, then round, then subtract this + * extra offset again. + */ + j += cpu * 3; + + rem = j % HZ; + + /* + * If the target jiffie is just after a whole second (which can happen + * due to delays of the timer irq, long irq off times etc etc) then + * we should round down to the whole second, not up. Use 1/4th second + * as cutoff for this rounding as an extreme upper bound for this. + */ + if (rem < HZ/4) /* round down */ + j = j - rem; + else /* round up */ + j = j - rem + HZ; + + /* now that we have rounded, subtract the extra skew again */ + j -= cpu * 3; + + if (j <= jiffies) /* rounding ate our timeout entirely; */ + return original; + return j; +} +EXPORT_SYMBOL_GPL(__round_jiffies); + +/** + * __round_jiffies_relative - function to round jiffies to a full second + * @j: the time in (relative) jiffies that should be rounded + * @cpu: the processor number on which the timeout will happen + * + * __round_jiffies_relative rounds a time delta in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The exact rounding is skewed for each processor to avoid all + * processors firing at the exact same time, which could lead + * to lock contention or spurious cache line bouncing. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long __round_jiffies_relative(unsigned long j, int cpu) +{ + /* + * In theory the following code can skip a jiffy in case jiffies + * increments right between the addition and the later subtraction. + * However since the entire point of this function is to use approximate + * timeouts, it's entirely ok to not handle that. + */ + return __round_jiffies(j + jiffies, cpu) - jiffies; +} +EXPORT_SYMBOL_GPL(__round_jiffies_relative); + +/** + * round_jiffies - function to round jiffies to a full second + * @j: the time in (absolute) jiffies that should be rounded + * + * round_jiffies rounds an absolute time in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long round_jiffies(unsigned long j) +{ + return __round_jiffies(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL_GPL(round_jiffies); + +/** + * round_jiffies_relative - function to round jiffies to a full second + * @j: the time in (relative) jiffies that should be rounded + * + * round_jiffies_relative rounds a time delta in the future (in jiffies) + * up or down to (approximately) full seconds. This is useful for timers + * for which the exact time they fire does not matter too much, as long as + * they fire approximately every X seconds. + * + * By rounding these timers to whole seconds, all such timers will fire + * at the same time, rather than at various times spread out. The goal + * of this is to have the CPU wake up less, which saves power. + * + * The return value is the rounded version of the "j" parameter. + */ +unsigned long round_jiffies_relative(unsigned long j) +{ + return __round_jiffies_relative(j, raw_smp_processor_id()); +} +EXPORT_SYMBOL_GPL(round_jiffies_relative); + + static inline void set_running_timer(tvec_base_t *base, struct timer_list *timer) { @@ -714,7 +846,7 @@ static int change_clocksource(void) clock = new; clock->cycle_last = now; printk(KERN_INFO "Time: %s clocksource has been installed.\n", - clock->name); + clock->name); return 1; } else if (clock->update_callback) { return clock->update_callback(); @@ -722,7 +854,10 @@ static int change_clocksource(void) return 0; } #else -#define change_clocksource() (0) +static inline int change_clocksource(void) +{ + return 0; +} #endif /** @@ -820,7 +955,8 @@ device_initcall(timekeeping_init_device); * If the error is already larger, we look ahead even further * to compensate for late or lost adjustments. */ -static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset) +static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, + s64 *offset) { s64 tick_error, i; u32 look_ahead, adj; @@ -844,7 +980,8 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 * * Now calculate the error in (1 << look_ahead) ticks, but first * remove the single look ahead already included in the error. */ - tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1); + tick_error = current_tick_length() >> + (TICK_LENGTH_SHIFT - clock->shift + 1); tick_error -= clock->xtime_interval >> 1; error = ((error - tick_error) >> look_ahead) + tick_error; @@ -896,7 +1033,8 @@ static void clocksource_adjust(struct clocksource *clock, s64 offset) clock->mult += adj; clock->xtime_interval += interval; clock->xtime_nsec -= offset; - clock->error -= (interval - offset) << (TICK_LENGTH_SHIFT - clock->shift); + clock->error -= (interval - offset) << + (TICK_LENGTH_SHIFT - clock->shift); } /** @@ -1008,11 +1146,15 @@ static inline void calc_load(unsigned long ticks) unsigned long active_tasks; /* fixed-point */ static int count = LOAD_FREQ; - active_tasks = count_active_tasks(); - for (count -= ticks; count < 0; count += LOAD_FREQ) { - CALC_LOAD(avenrun[0], EXP_1, active_tasks); - CALC_LOAD(avenrun[1], EXP_5, active_tasks); - CALC_LOAD(avenrun[2], EXP_15, active_tasks); + count -= ticks; + if (unlikely(count < 0)) { + active_tasks = count_active_tasks(); + do { + CALC_LOAD(avenrun[0], EXP_1, active_tasks); + CALC_LOAD(avenrun[1], EXP_5, active_tasks); + CALC_LOAD(avenrun[2], EXP_15, active_tasks); + count += LOAD_FREQ; + } while (count < 0); } } @@ -1202,11 +1344,10 @@ fastcall signed long __sched schedule_timeout(signed long timeout) * should never happens anyway). You just have the printk() * that will tell you if something is gone wrong and where. */ - if (timeout < 0) - { + if (timeout < 0) { printk(KERN_ERR "schedule_timeout: wrong timeout " - "value %lx from %p\n", timeout, - __builtin_return_address(0)); + "value %lx\n", timeout); + dump_stack(); current->state = TASK_RUNNING; goto out; } |
