diff options
Diffstat (limited to 'kernel/rcutree_plugin.h')
| -rw-r--r-- | kernel/rcutree_plugin.h | 450 |
1 files changed, 276 insertions, 174 deletions
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 8bb35d7..c023464 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -25,7 +25,6 @@ */ #include <linux/delay.h> -#include <linux/stop_machine.h> #define RCU_KTHREAD_PRIO 1 @@ -63,7 +62,10 @@ static void __init rcu_bootup_announce_oddness(void) printk(KERN_INFO "\tRCU torture testing starts during boot.\n"); #endif #if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE) - printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n"); + printk(KERN_INFO "\tDump stacks of tasks blocking RCU-preempt GP.\n"); +#endif +#if defined(CONFIG_RCU_CPU_STALL_INFO) + printk(KERN_INFO "\tAdditional per-CPU info printed with stalls.\n"); #endif #if NUM_RCU_LVL_4 != 0 printk(KERN_INFO "\tExperimental four-level hierarchy is enabled.\n"); @@ -490,6 +492,31 @@ static void rcu_print_detail_task_stall(struct rcu_state *rsp) #endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */ +#ifdef CONFIG_RCU_CPU_STALL_INFO + +static void rcu_print_task_stall_begin(struct rcu_node *rnp) +{ + printk(KERN_ERR "\tTasks blocked on level-%d rcu_node (CPUs %d-%d):", + rnp->level, rnp->grplo, rnp->grphi); +} + +static void rcu_print_task_stall_end(void) +{ + printk(KERN_CONT "\n"); +} + +#else /* #ifdef CONFIG_RCU_CPU_STALL_INFO */ + +static void rcu_print_task_stall_begin(struct rcu_node *rnp) +{ +} + +static void rcu_print_task_stall_end(void) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_INFO */ + /* * Scan the current list of tasks blocked within RCU read-side critical * sections, printing out the tid of each. @@ -501,12 +528,14 @@ static int rcu_print_task_stall(struct rcu_node *rnp) if (!rcu_preempt_blocked_readers_cgp(rnp)) return 0; + rcu_print_task_stall_begin(rnp); t = list_entry(rnp->gp_tasks, struct task_struct, rcu_node_entry); list_for_each_entry_continue(t, &rnp->blkd_tasks, rcu_node_entry) { - printk(" P%d", t->pid); + printk(KERN_CONT " P%d", t->pid); ndetected++; } + rcu_print_task_stall_end(); return ndetected; } @@ -581,7 +610,7 @@ static int rcu_preempt_offline_tasks(struct rcu_state *rsp, * absolutely necessary, but this is a good performance/complexity * tradeoff. */ - if (rcu_preempt_blocked_readers_cgp(rnp)) + if (rcu_preempt_blocked_readers_cgp(rnp) && rnp->qsmask == 0) retval |= RCU_OFL_TASKS_NORM_GP; if (rcu_preempted_readers_exp(rnp)) retval |= RCU_OFL_TASKS_EXP_GP; @@ -618,16 +647,16 @@ static int rcu_preempt_offline_tasks(struct rcu_state *rsp, return retval; } +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ + /* * Do CPU-offline processing for preemptible RCU. */ -static void rcu_preempt_offline_cpu(int cpu) +static void rcu_preempt_cleanup_dead_cpu(int cpu) { - __rcu_offline_cpu(cpu, &rcu_preempt_state); + rcu_cleanup_dead_cpu(cpu, &rcu_preempt_state); } -#endif /* #ifdef CONFIG_HOTPLUG_CPU */ - /* * Check for a quiescent state from the current CPU. When a task blocks, * the task is recorded in the corresponding CPU's rcu_node structure, @@ -671,10 +700,24 @@ static void rcu_preempt_do_callbacks(void) */ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) { - __call_rcu(head, func, &rcu_preempt_state); + __call_rcu(head, func, &rcu_preempt_state, 0); } EXPORT_SYMBOL_GPL(call_rcu); +/* + * Queue an RCU callback for lazy invocation after a grace period. + * This will likely be later named something like "call_rcu_lazy()", + * but this change will require some way of tagging the lazy RCU + * callbacks in the list of pending callbacks. Until then, this + * function may only be called from __kfree_rcu(). + */ +void kfree_call_rcu(struct rcu_head *head, + void (*func)(struct rcu_head *rcu)) +{ + __call_rcu(head, func, &rcu_preempt_state, 1); +} +EXPORT_SYMBOL_GPL(kfree_call_rcu); + /** * synchronize_rcu - wait until a grace period has elapsed. * @@ -688,6 +731,10 @@ EXPORT_SYMBOL_GPL(call_rcu); */ void synchronize_rcu(void) { + rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map) && + !lock_is_held(&rcu_lock_map) && + !lock_is_held(&rcu_sched_lock_map), + "Illegal synchronize_rcu() in RCU read-side critical section"); if (!rcu_scheduler_active) return; wait_rcu_gp(call_rcu); @@ -788,10 +835,22 @@ sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp) rcu_report_exp_rnp(rsp, rnp, false); /* Don't wake self. */ } -/* - * Wait for an rcu-preempt grace period, but expedite it. The basic idea - * is to invoke synchronize_sched_expedited() to push all the tasks to - * the ->blkd_tasks lists and wait for this list to drain. +/** + * synchronize_rcu_expedited - Brute-force RCU grace period + * + * Wait for an RCU-preempt grace period, but expedite it. The basic + * idea is to invoke synchronize_sched_expedited() to push all the tasks to + * the ->blkd_tasks lists and wait for this list to drain. This consumes + * significant time on all CPUs and is unfriendly to real-time workloads, + * so is thus not recommended for any sort of common-case code. + * In fact, if you are using synchronize_rcu_expedited() in a loop, + * please restructure your code to batch your updates, and then Use a + * single synchronize_rcu() instead. + * + * Note that it is illegal to call this function while holding any lock + * that is acquired by a CPU-hotplug notifier. And yes, it is also illegal + * to call this function from a CPU-hotplug notifier. Failing to observe + * these restriction will result in deadlock. */ void synchronize_rcu_expedited(void) { @@ -869,9 +928,9 @@ static int rcu_preempt_pending(int cpu) } /* - * Does preemptible RCU need the CPU to stay out of dynticks mode? + * Does preemptible RCU have callbacks on this CPU? */ -static int rcu_preempt_needs_cpu(int cpu) +static int rcu_preempt_cpu_has_callbacks(int cpu) { return !!per_cpu(rcu_preempt_data, cpu).nxtlist; } @@ -894,11 +953,12 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu) } /* - * Move preemptible RCU's callbacks from dying CPU to other online CPU. + * Move preemptible RCU's callbacks from dying CPU to other online CPU + * and record a quiescent state. */ -static void rcu_preempt_send_cbs_to_online(void) +static void rcu_preempt_cleanup_dying_cpu(void) { - rcu_send_cbs_to_online(&rcu_preempt_state); + rcu_cleanup_dying_cpu(&rcu_preempt_state); } /* @@ -1034,16 +1094,16 @@ static int rcu_preempt_offline_tasks(struct rcu_state *rsp, return 0; } +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ + /* * Because preemptible RCU does not exist, it never needs CPU-offline * processing. */ -static void rcu_preempt_offline_cpu(int cpu) +static void rcu_preempt_cleanup_dead_cpu(int cpu) { } -#endif /* #ifdef CONFIG_HOTPLUG_CPU */ - /* * Because preemptible RCU does not exist, it never has any callbacks * to check. @@ -1061,6 +1121,22 @@ static void rcu_preempt_process_callbacks(void) } /* + * Queue an RCU callback for lazy invocation after a grace period. + * This will likely be later named something like "call_rcu_lazy()", + * but this change will require some way of tagging the lazy RCU + * callbacks in the list of pending callbacks. Until then, this + * function may only be called from __kfree_rcu(). + * + * Because there is no preemptible RCU, we use RCU-sched instead. + */ +void kfree_call_rcu(struct rcu_head *head, + void (*func)(struct rcu_head *rcu)) +{ + __call_rcu(head, func, &rcu_sched_state, 1); +} +EXPORT_SYMBOL_GPL(kfree_call_rcu); + +/* * Wait for an rcu-preempt grace period, but make it happen quickly. * But because preemptible RCU does not exist, map to rcu-sched. */ @@ -1093,9 +1169,9 @@ static int rcu_preempt_pending(int cpu) } /* - * Because preemptible RCU does not exist, it never needs any CPU. + * Because preemptible RCU does not exist, it never has callbacks */ -static int rcu_preempt_needs_cpu(int cpu) +static int rcu_preempt_cpu_has_callbacks(int cpu) { return 0; } @@ -1119,9 +1195,9 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu) } /* - * Because there is no preemptible RCU, there are no callbacks to move. + * Because there is no preemptible RCU, there is no cleanup to do. */ -static void rcu_preempt_send_cbs_to_online(void) +static void rcu_preempt_cleanup_dying_cpu(void) { } @@ -1823,132 +1899,6 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) #endif /* #else #ifdef CONFIG_RCU_BOOST */ -#ifndef CONFIG_SMP - -void synchronize_sched_expedited(void) -{ - cond_resched(); -} -EXPORT_SYMBOL_GPL(synchronize_sched_expedited); - -#else /* #ifndef CONFIG_SMP */ - -static atomic_t sync_sched_expedited_started = ATOMIC_INIT(0); -static atomic_t sync_sched_expedited_done = ATOMIC_INIT(0); - -static int synchronize_sched_expedited_cpu_stop(void *data) -{ - /* - * There must be a full memory barrier on each affected CPU - * between the time that try_stop_cpus() is called and the - * time that it returns. - * - * In the current initial implementation of cpu_stop, the - * above condition is already met when the control reaches - * this point and the following smp_mb() is not strictly - * necessary. Do smp_mb() anyway for documentation and - * robustness against future implementation changes. - */ - smp_mb(); /* See above comment block. */ - return 0; -} - -/* - * Wait for an rcu-sched grace period to elapse, but use "big hammer" - * approach to force grace period to end quickly. This consumes - * significant time on all CPUs, and is thus not recommended for - * any sort of common-case code. - * - * Note that it is illegal to call this function while holding any - * lock that is acquired by a CPU-hotplug notifier. Failing to - * observe this restriction will result in deadlock. - * - * This implementation can be thought of as an application of ticket - * locking to RCU, with sync_sched_expedited_started and - * sync_sched_expedited_done taking on the roles of the halves - * of the ticket-lock word. Each task atomically increments - * sync_sched_expedited_started upon entry, snapshotting the old value, - * then attempts to stop all the CPUs. If this succeeds, then each - * CPU will have executed a context switch, resulting in an RCU-sched - * grace period. We are then done, so we use atomic_cmpxchg() to - * update sync_sched_expedited_done to match our snapshot -- but - * only if someone else has not already advanced past our snapshot. - * - * On the other hand, if try_stop_cpus() fails, we check the value - * of sync_sched_expedited_done. If it has advanced past our - * initial snapshot, then someone else must have forced a grace period - * some time after we took our snapshot. In this case, our work is - * done for us, and we can simply return. Otherwise, we try again, - * but keep our initial snapshot for purposes of checking for someone - * doing our work for us. - * - * If we fail too many times in a row, we fall back to synchronize_sched(). - */ -void synchronize_sched_expedited(void) -{ - int firstsnap, s, snap, trycount = 0; - - /* Note that atomic_inc_return() implies full memory barrier. */ - firstsnap = snap = atomic_inc_return(&sync_sched_expedited_started); - get_online_cpus(); - - /* - * Each pass through the following loop attempts to force a - * context switch on each CPU. - */ - while (try_stop_cpus(cpu_online_mask, - synchronize_sched_expedited_cpu_stop, - NULL) == -EAGAIN) { - put_online_cpus(); - - /* No joy, try again later. Or just synchronize_sched(). */ - if (trycount++ < 10) - udelay(trycount * num_online_cpus()); - else { - synchronize_sched(); - return; - } - - /* Check to see if someone else did our work for us. */ - s = atomic_read(&sync_sched_expedited_done); - if (UINT_CMP_GE((unsigned)s, (unsigned)firstsnap)) { - smp_mb(); /* ensure test happens before caller kfree */ - return; - } - - /* - * Refetching sync_sched_expedited_started allows later - * callers to piggyback on our grace period. We subtract - * 1 to get the same token that the last incrementer got. - * We retry after they started, so our grace period works - * for them, and they started after our first try, so their - * grace period works for us. - */ - get_online_cpus(); - snap = atomic_read(&sync_sched_expedited_started); - smp_mb(); /* ensure read is before try_stop_cpus(). */ - } - - /* - * Everyone up to our most recent fetch is covered by our grace - * period. Update the counter, but only if our work is still - * relevant -- which it won't be if someone who started later - * than we did beat us to the punch. - */ - do { - s = atomic_read(&sync_sched_expedited_done); - if (UINT_CMP_GE((unsigned)s, (unsigned)snap)) { - smp_mb(); /* ensure test happens before caller kfree */ - break; - } - } while (atomic_cmpxchg(&sync_sched_expedited_done, s, snap) != s); - - put_online_cpus(); -} -EXPORT_SYMBOL_GPL(synchronize_sched_expedited); - -#endif /* #else #ifndef CONFIG_SMP */ - #if !defined(CONFIG_RCU_FAST_NO_HZ) /* @@ -1981,7 +1931,7 @@ static void rcu_cleanup_after_idle(int cpu) } /* - * Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=y, + * Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n, * is nothing. */ static void rcu_prepare_for_idle(int cpu) @@ -2015,6 +1965,9 @@ static void rcu_prepare_for_idle(int cpu) * number, be warned: Setting RCU_IDLE_GP_DELAY too high can hang your * system. And if you are -that- concerned about energy efficiency, * just power the system down and be done with it! + * RCU_IDLE_LAZY_GP_DELAY gives the number of jiffies that a CPU is + * permitted to sleep in dyntick-idle mode with only lazy RCU + * callbacks pending. Setting this too high can OOM your system. * * The values below work well in practice. If future workloads require * adjustment, they can be converted into kernel config parameters, though @@ -2023,11 +1976,13 @@ static void rcu_prepare_for_idle(int cpu) #define RCU_IDLE_FLUSHES 5 /* Number of dyntick-idle tries. */ #define RCU_IDLE_OPT_FLUSHES 3 /* Optional dyntick-idle tries. */ #define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */ +#define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ static DEFINE_PER_CPU(int, rcu_dyntick_drain); static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff); static DEFINE_PER_CPU(struct hrtimer, rcu_idle_gp_timer); -static ktime_t rcu_idle_gp_wait; +static ktime_t rcu_idle_gp_wait; /* If some non-lazy callbacks. */ +static ktime_t rcu_idle_lazy_gp_wait; /* If only lazy callbacks. */ /* * Allow the CPU to enter dyntick-idle mode if either: (1) There are no @@ -2048,6 +2003,48 @@ int rcu_needs_cpu(int cpu) } /* + * Does the specified flavor of RCU have non-lazy callbacks pending on + * the specified CPU? Both RCU flavor and CPU are specified by the + * rcu_data structure. + */ +static bool __rcu_cpu_has_nonlazy_callbacks(struct rcu_data *rdp) +{ + return rdp->qlen != rdp->qlen_lazy; +} + +#ifdef CONFIG_TREE_PREEMPT_RCU + +/* + * Are there non-lazy RCU-preempt callbacks? (There cannot be if there + * is no RCU-preempt in the kernel.) + */ +static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) +{ + struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu); + + return __rcu_cpu_has_nonlazy_callbacks(rdp); +} + +#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */ + +static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) +{ + return 0; +} + +#endif /* else #ifdef CONFIG_TREE_PREEMPT_RCU */ + +/* + * Does any flavor of RCU have non-lazy callbacks on the specified CPU? + */ +static bool rcu_cpu_has_nonlazy_callbacks(int cpu) +{ + return __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_sched_data, cpu)) || + __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_bh_data, cpu)) || + rcu_preempt_cpu_has_nonlazy_callbacks(cpu); +} + +/* * Timer handler used to force CPU to start pushing its remaining RCU * callbacks in the case where it entered dyntick-idle mode with callbacks * pending. The hander doesn't really need to do anything because the @@ -2074,6 +2071,8 @@ static void rcu_prepare_for_idle_init(int cpu) unsigned int upj = jiffies_to_usecs(RCU_IDLE_GP_DELAY); rcu_idle_gp_wait = ns_to_ktime(upj * (u64)1000); + upj = jiffies_to_usecs(RCU_IDLE_LAZY_GP_DELAY); + rcu_idle_lazy_gp_wait = ns_to_ktime(upj * (u64)1000); firsttime = 0; } } @@ -2109,10 +2108,6 @@ static void rcu_cleanup_after_idle(int cpu) */ static void rcu_prepare_for_idle(int cpu) { - unsigned long flags; - - local_irq_save(flags); - /* * If there are no callbacks on this CPU, enter dyntick-idle mode. * Also reset state to avoid prejudicing later attempts. @@ -2120,7 +2115,6 @@ static void rcu_prepare_for_idle(int cpu) if (!rcu_cpu_has_callbacks(cpu)) { per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; per_cpu(rcu_dyntick_drain, cpu) = 0; - local_irq_restore(flags); trace_rcu_prep_idle("No callbacks"); return; } @@ -2130,7 +2124,6 @@ static void rcu_prepare_for_idle(int cpu) * refrained from disabling the scheduling-clock tick. */ if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) { - local_irq_restore(flags); trace_rcu_prep_idle("In holdoff"); return; } @@ -2140,18 +2133,22 @@ static void rcu_prepare_for_idle(int cpu) /* First time through, initialize the counter. */ per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES; } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES && - !rcu_pending(cpu)) { + !rcu_pending(cpu) && + !local_softirq_pending()) { /* Can we go dyntick-idle despite still having callbacks? */ trace_rcu_prep_idle("Dyntick with callbacks"); per_cpu(rcu_dyntick_drain, cpu) = 0; - per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; - hrtimer_start(&per_cpu(rcu_idle_gp_timer, cpu), - rcu_idle_gp_wait, HRTIMER_MODE_REL); + per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; + if (rcu_cpu_has_nonlazy_callbacks(cpu)) + hrtimer_start(&per_cpu(rcu_idle_gp_timer, cpu), + rcu_idle_gp_wait, HRTIMER_MODE_REL); + else + hrtimer_start(&per_cpu(rcu_idle_gp_timer, cpu), + rcu_idle_lazy_gp_wait, HRTIMER_MODE_REL); return; /* Nothing more to do immediately. */ } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) { /* We have hit the limit, so time to give up. */ per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; - local_irq_restore(flags); trace_rcu_prep_idle("Begin holdoff"); invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */ return; @@ -2163,23 +2160,17 @@ static void rcu_prepare_for_idle(int cpu) */ #ifdef CONFIG_TREE_PREEMPT_RCU if (per_cpu(rcu_preempt_data, cpu).nxtlist) { - local_irq_restore(flags); rcu_preempt_qs(cpu); force_quiescent_state(&rcu_preempt_state, 0); - local_irq_save(flags); } #endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */ if (per_cpu(rcu_sched_data, cpu).nxtlist) { - local_irq_restore(flags); rcu_sched_qs(cpu); force_quiescent_state(&rcu_sched_state, 0); - local_irq_save(flags); } if (per_cpu(rcu_bh_data, cpu).nxtlist) { - local_irq_restore(flags); rcu_bh_qs(cpu); force_quiescent_state(&rcu_bh_state, 0); - local_irq_save(flags); } /* @@ -2187,13 +2178,124 @@ static void rcu_prepare_for_idle(int cpu) * So try forcing the callbacks through the grace period. */ if (rcu_cpu_has_callbacks(cpu)) { - local_irq_restore(flags); trace_rcu_prep_idle("More callbacks"); invoke_rcu_core(); - } else { - local_irq_restore(flags); + } else trace_rcu_prep_idle("Callbacks drained"); - } } #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */ + +#ifdef CONFIG_RCU_CPU_STALL_INFO + +#ifdef CONFIG_RCU_FAST_NO_HZ + +static void print_cpu_stall_fast_no_hz(char *cp, int cpu) +{ + struct hrtimer *hrtp = &per_cpu(rcu_idle_gp_timer, cpu); + + sprintf(cp, "drain=%d %c timer=%lld", + per_cpu(rcu_dyntick_drain, cpu), + per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.', + hrtimer_active(hrtp) + ? ktime_to_us(hrtimer_get_remaining(hrtp)) + : -1); +} + +#else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ + +static void print_cpu_stall_fast_no_hz(char *cp, int cpu) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */ + +/* Initiate the stall-info list. */ +static void print_cpu_stall_info_begin(void) +{ + printk(KERN_CONT "\n"); +} + +/* + * Print out diagnostic information for the specified stalled CPU. + * + * If the specified CPU is aware of the current RCU grace period + * (flavor specified by rsp), then print the number of scheduling + * clock interrupts the CPU has taken during the time that it has + * been aware. Otherwise, print the number of RCU grace periods + * that this CPU is ignorant of, for example, "1" if the CPU was + * aware of the previous grace period. + * + * Also print out idle and (if CONFIG_RCU_FAST_NO_HZ) idle-entry info. + */ +static void print_cpu_stall_info(struct rcu_state *rsp, int cpu) +{ + char fast_no_hz[72]; + struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu); + struct rcu_dynticks *rdtp = rdp->dynticks; + char *ticks_title; + unsigned long ticks_value; + + if (rsp->gpnum == rdp->gpnum) { + ticks_title = "ticks this GP"; + ticks_value = rdp->ticks_this_gp; + } else { + ticks_title = "GPs behind"; + ticks_value = rsp->gpnum - rdp->gpnum; + } + print_cpu_stall_fast_no_hz(fast_no_hz, cpu); + printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d %s\n", + cpu, ticks_value, ticks_title, + atomic_read(&rdtp->dynticks) & 0xfff, + rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting, + fast_no_hz); +} + +/* Terminate the stall-info list. */ +static void print_cpu_stall_info_end(void) +{ + printk(KERN_ERR "\t"); +} + +/* Zero ->ticks_this_gp for all flavors of RCU. */ +static void zero_cpu_stall_ticks(struct rcu_data *rdp) +{ + rdp->ticks_this_gp = 0; +} + +/* Increment ->ticks_this_gp for all flavors of RCU. */ +static void increment_cpu_stall_ticks(void) +{ + __get_cpu_var(rcu_sched_data).ticks_this_gp++; + __get_cpu_var(rcu_bh_data).ticks_this_gp++; +#ifdef CONFIG_TREE_PREEMPT_RCU + __get_cpu_var(rcu_preempt_data).ticks_this_gp++; +#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */ +} + +#else /* #ifdef CONFIG_RCU_CPU_STALL_INFO */ + +static void print_cpu_stall_info_begin(void) +{ + printk(KERN_CONT " {"); +} + +static void print_cpu_stall_info(struct rcu_state *rsp, int cpu) +{ + printk(KERN_CONT " %d", cpu); +} + +static void print_cpu_stall_info_end(void) +{ + printk(KERN_CONT "} "); +} + +static void zero_cpu_stall_ticks(struct rcu_data *rdp) +{ +} + +static void increment_cpu_stall_ticks(void) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_INFO */ |
