summaryrefslogtreecommitdiffstats
path: root/kernel/irq/autoprobe.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/irq/autoprobe.c')
-rw-r--r--kernel/irq/autoprobe.c189
1 files changed, 189 insertions, 0 deletions
diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c
new file mode 100644
index 0000000..98d62d8
--- /dev/null
+++ b/kernel/irq/autoprobe.c
@@ -0,0 +1,189 @@
+/*
+ * linux/kernel/irq/autoprobe.c
+ *
+ * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the interrupt probing code and driver APIs.
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+/*
+ * Autodetection depends on the fact that any interrupt that
+ * comes in on to an unassigned handler will get stuck with
+ * "IRQ_WAITING" cleared and the interrupt disabled.
+ */
+static DECLARE_MUTEX(probe_sem);
+
+/**
+ * probe_irq_on - begin an interrupt autodetect
+ *
+ * Commence probing for an interrupt. The interrupts are scanned
+ * and a mask of potential interrupt lines is returned.
+ *
+ */
+unsigned long probe_irq_on(void)
+{
+ unsigned long val, delay;
+ irq_desc_t *desc;
+ unsigned int i;
+
+ down(&probe_sem);
+ /*
+ * something may have generated an irq long ago and we want to
+ * flush such a longstanding irq before considering it as spurious.
+ */
+ for (i = NR_IRQS-1; i > 0; i--) {
+ desc = irq_desc + i;
+
+ spin_lock_irq(&desc->lock);
+ if (!irq_desc[i].action)
+ irq_desc[i].handler->startup(i);
+ spin_unlock_irq(&desc->lock);
+ }
+
+ /* Wait for longstanding interrupts to trigger. */
+ for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
+ /* about 20ms delay */ barrier();
+
+ /*
+ * enable any unassigned irqs
+ * (we must startup again here because if a longstanding irq
+ * happened in the previous stage, it may have masked itself)
+ */
+ for (i = NR_IRQS-1; i > 0; i--) {
+ desc = irq_desc + i;
+
+ spin_lock_irq(&desc->lock);
+ if (!desc->action) {
+ desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
+ if (desc->handler->startup(i))
+ desc->status |= IRQ_PENDING;
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+
+ /*
+ * Wait for spurious interrupts to trigger
+ */
+ for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
+ /* about 100ms delay */ barrier();
+
+ /*
+ * Now filter out any obviously spurious interrupts
+ */
+ val = 0;
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc_t *desc = irq_desc + i;
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status = desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ /* It triggered already - consider it spurious. */
+ if (!(status & IRQ_WAITING)) {
+ desc->status = status & ~IRQ_AUTODETECT;
+ desc->handler->shutdown(i);
+ } else
+ if (i < 32)
+ val |= 1 << i;
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+
+ return val;
+}
+
+EXPORT_SYMBOL(probe_irq_on);
+
+/**
+ * probe_irq_mask - scan a bitmap of interrupt lines
+ * @val: mask of interrupts to consider
+ *
+ * Scan the interrupt lines and return a bitmap of active
+ * autodetect interrupts. The interrupt probe logic state
+ * is then returned to its previous value.
+ *
+ * Note: we need to scan all the irq's even though we will
+ * only return autodetect irq numbers - just so that we reset
+ * them all to a known state.
+ */
+unsigned int probe_irq_mask(unsigned long val)
+{
+ unsigned int mask;
+ int i;
+
+ mask = 0;
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc_t *desc = irq_desc + i;
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status = desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ if (i < 16 && !(status & IRQ_WAITING))
+ mask |= 1 << i;
+
+ desc->status = status & ~IRQ_AUTODETECT;
+ desc->handler->shutdown(i);
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+ up(&probe_sem);
+
+ return mask & val;
+}
+EXPORT_SYMBOL(probe_irq_mask);
+
+/**
+ * probe_irq_off - end an interrupt autodetect
+ * @val: mask of potential interrupts (unused)
+ *
+ * Scans the unused interrupt lines and returns the line which
+ * appears to have triggered the interrupt. If no interrupt was
+ * found then zero is returned. If more than one interrupt is
+ * found then minus the first candidate is returned to indicate
+ * their is doubt.
+ *
+ * The interrupt probe logic state is returned to its previous
+ * value.
+ *
+ * BUGS: When used in a module (which arguably shouldn't happen)
+ * nothing prevents two IRQ probe callers from overlapping. The
+ * results of this are non-optimal.
+ */
+int probe_irq_off(unsigned long val)
+{
+ int i, irq_found = 0, nr_irqs = 0;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc_t *desc = irq_desc + i;
+ unsigned int status;
+
+ spin_lock_irq(&desc->lock);
+ status = desc->status;
+
+ if (status & IRQ_AUTODETECT) {
+ if (!(status & IRQ_WAITING)) {
+ if (!nr_irqs)
+ irq_found = i;
+ nr_irqs++;
+ }
+ desc->status = status & ~IRQ_AUTODETECT;
+ desc->handler->shutdown(i);
+ }
+ spin_unlock_irq(&desc->lock);
+ }
+ up(&probe_sem);
+
+ if (nr_irqs > 1)
+ irq_found = -irq_found;
+ return irq_found;
+}
+
+EXPORT_SYMBOL(probe_irq_off);
+
OpenPOWER on IntegriCloud