diff options
Diffstat (limited to 'kernel/irq/autoprobe.c')
| -rw-r--r-- | kernel/irq/autoprobe.c | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/kernel/irq/autoprobe.c b/kernel/irq/autoprobe.c new file mode 100644 index 0000000..98d62d8 --- /dev/null +++ b/kernel/irq/autoprobe.c @@ -0,0 +1,189 @@ +/* + * linux/kernel/irq/autoprobe.c + * + * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar + * + * This file contains the interrupt probing code and driver APIs. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/interrupt.h> + +/* + * Autodetection depends on the fact that any interrupt that + * comes in on to an unassigned handler will get stuck with + * "IRQ_WAITING" cleared and the interrupt disabled. + */ +static DECLARE_MUTEX(probe_sem); + +/** + * probe_irq_on - begin an interrupt autodetect + * + * Commence probing for an interrupt. The interrupts are scanned + * and a mask of potential interrupt lines is returned. + * + */ +unsigned long probe_irq_on(void) +{ + unsigned long val, delay; + irq_desc_t *desc; + unsigned int i; + + down(&probe_sem); + /* + * something may have generated an irq long ago and we want to + * flush such a longstanding irq before considering it as spurious. + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!irq_desc[i].action) + irq_desc[i].handler->startup(i); + spin_unlock_irq(&desc->lock); + } + + /* Wait for longstanding interrupts to trigger. */ + for (delay = jiffies + HZ/50; time_after(delay, jiffies); ) + /* about 20ms delay */ barrier(); + + /* + * enable any unassigned irqs + * (we must startup again here because if a longstanding irq + * happened in the previous stage, it may have masked itself) + */ + for (i = NR_IRQS-1; i > 0; i--) { + desc = irq_desc + i; + + spin_lock_irq(&desc->lock); + if (!desc->action) { + desc->status |= IRQ_AUTODETECT | IRQ_WAITING; + if (desc->handler->startup(i)) + desc->status |= IRQ_PENDING; + } + spin_unlock_irq(&desc->lock); + } + + /* + * Wait for spurious interrupts to trigger + */ + for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) + /* about 100ms delay */ barrier(); + + /* + * Now filter out any obviously spurious interrupts + */ + val = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + /* It triggered already - consider it spurious. */ + if (!(status & IRQ_WAITING)) { + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } else + if (i < 32) + val |= 1 << i; + } + spin_unlock_irq(&desc->lock); + } + + return val; +} + +EXPORT_SYMBOL(probe_irq_on); + +/** + * probe_irq_mask - scan a bitmap of interrupt lines + * @val: mask of interrupts to consider + * + * Scan the interrupt lines and return a bitmap of active + * autodetect interrupts. The interrupt probe logic state + * is then returned to its previous value. + * + * Note: we need to scan all the irq's even though we will + * only return autodetect irq numbers - just so that we reset + * them all to a known state. + */ +unsigned int probe_irq_mask(unsigned long val) +{ + unsigned int mask; + int i; + + mask = 0; + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (i < 16 && !(status & IRQ_WAITING)) + mask |= 1 << i; + + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + return mask & val; +} +EXPORT_SYMBOL(probe_irq_mask); + +/** + * probe_irq_off - end an interrupt autodetect + * @val: mask of potential interrupts (unused) + * + * Scans the unused interrupt lines and returns the line which + * appears to have triggered the interrupt. If no interrupt was + * found then zero is returned. If more than one interrupt is + * found then minus the first candidate is returned to indicate + * their is doubt. + * + * The interrupt probe logic state is returned to its previous + * value. + * + * BUGS: When used in a module (which arguably shouldn't happen) + * nothing prevents two IRQ probe callers from overlapping. The + * results of this are non-optimal. + */ +int probe_irq_off(unsigned long val) +{ + int i, irq_found = 0, nr_irqs = 0; + + for (i = 0; i < NR_IRQS; i++) { + irq_desc_t *desc = irq_desc + i; + unsigned int status; + + spin_lock_irq(&desc->lock); + status = desc->status; + + if (status & IRQ_AUTODETECT) { + if (!(status & IRQ_WAITING)) { + if (!nr_irqs) + irq_found = i; + nr_irqs++; + } + desc->status = status & ~IRQ_AUTODETECT; + desc->handler->shutdown(i); + } + spin_unlock_irq(&desc->lock); + } + up(&probe_sem); + + if (nr_irqs > 1) + irq_found = -irq_found; + return irq_found; +} + +EXPORT_SYMBOL(probe_irq_off); + |
