1 files changed, 564 insertions, 0 deletions

diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c
new file mode 100644
index 0000000..75bd9b3
--- /dev/null
+++ b/kernel/debug/kdb/kdb_bp.c
@@ -0,0 +1,564 @@
+/*
+ * Kernel Debugger Architecture Independent Breakpoint Handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kdb.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include "kdb_private.h"
+
+/*
+ * Table of kdb_breakpoints
+ */
+kdb_bp_t kdb_breakpoints[KDB_MAXBPT];
+
+static void kdb_setsinglestep(struct pt_regs *regs)
+{
+	KDB_STATE_SET(DOING_SS);
+}
+
+static char *kdb_rwtypes[] = {
+	"Instruction(i)",
+	"Instruction(Register)",
+	"Data Write",
+	"I/O",
+	"Data Access"
+};
+
+static char *kdb_bptype(kdb_bp_t *bp)
+{
+	if (bp->bp_type < 0 || bp->bp_type > 4)
+		return "";
+
+	return kdb_rwtypes[bp->bp_type];
+}
+
+static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp)
+{
+	int nextarg = *nextargp;
+	int diag;
+
+	bp->bph_length = 1;
+	if ((argc + 1) != nextarg) {
+		if (strnicmp(argv[nextarg], "datar", sizeof("datar")) == 0)
+			bp->bp_type = BP_ACCESS_WATCHPOINT;
+		else if (strnicmp(argv[nextarg], "dataw", sizeof("dataw")) == 0)
+			bp->bp_type = BP_WRITE_WATCHPOINT;
+		else if (strnicmp(argv[nextarg], "inst", sizeof("inst")) == 0)
+			bp->bp_type = BP_HARDWARE_BREAKPOINT;
+		else
+			return KDB_ARGCOUNT;
+
+		bp->bph_length = 1;
+
+		nextarg++;
+
+		if ((argc + 1) != nextarg) {
+			unsigned long len;
+
+			diag = kdbgetularg((char *)argv[nextarg],
+					   &len);
+			if (diag)
+				return diag;
+
+
+			if (len > 8)
+				return KDB_BADLENGTH;
+
+			bp->bph_length = len;
+			nextarg++;
+		}
+
+		if ((argc + 1) != nextarg)
+			return KDB_ARGCOUNT;
+	}
+
+	*nextargp = nextarg;
+	return 0;
+}
+
+static int _kdb_bp_remove(kdb_bp_t *bp)
+{
+	int ret = 1;
+	if (!bp->bp_installed)
+		return ret;
+	if (!bp->bp_type)
+		ret = dbg_remove_sw_break(bp->bp_addr);
+	else
+		ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr,
+			 bp->bph_length,
+			 bp->bp_type);
+	if (ret == 0)
+		bp->bp_installed = 0;
+	return ret;
+}
+
+static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp)
+{
+	if (KDB_DEBUG(BP))
+		kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs));
+
+	/*
+	 * Setup single step
+	 */
+	kdb_setsinglestep(regs);
+
+	/*
+	 * Reset delay attribute
+	 */
+	bp->bp_delay = 0;
+	bp->bp_delayed = 1;
+}
+
+static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp)
+{
+	int ret;
+	/*
+	 * Install the breakpoint, if it is not already installed.
+	 */
+
+	if (KDB_DEBUG(BP))
+		kdb_printf("%s: bp_installed %d\n",
+			   __func__, bp->bp_installed);
+	if (!KDB_STATE(SSBPT))
+		bp->bp_delay = 0;
+	if (bp->bp_installed)
+		return 1;
+	if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) {
+		if (KDB_DEBUG(BP))
+			kdb_printf("%s: delayed bp\n", __func__);
+		kdb_handle_bp(regs, bp);
+		return 0;
+	}
+	if (!bp->bp_type)
+		ret = dbg_set_sw_break(bp->bp_addr);
+	else
+		ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr,
+			 bp->bph_length,
+			 bp->bp_type);
+	if (ret == 0) {
+		bp->bp_installed = 1;
+	} else {
+		kdb_printf("%s: failed to set breakpoint at 0x%lx\n",
+			   __func__, bp->bp_addr);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * kdb_bp_install
+ *
+ *	Install kdb_breakpoints prior to returning from the
+ *	kernel debugger.  This allows the kdb_breakpoints to be set
+ *	upon functions that are used internally by kdb, such as
+ *	printk().  This function is only called once per kdb session.
+ */
+void kdb_bp_install(struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < KDB_MAXBPT; i++) {
+		kdb_bp_t *bp = &kdb_breakpoints[i];
+
+		if (KDB_DEBUG(BP)) {
+			kdb_printf("%s: bp %d bp_enabled %d\n",
+				   __func__, i, bp->bp_enabled);
+		}
+		if (bp->bp_enabled)
+			_kdb_bp_install(regs, bp);
+	}
+}
+
+/*
+ * kdb_bp_remove
+ *
+ *	Remove kdb_breakpoints upon entry to the kernel debugger.
+ *
+ * Parameters:
+ *	None.
+ * Outputs:
+ *	None.
+ * Returns:
+ *	None.
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+void kdb_bp_remove(void)
+{
+	int i;
+
+	for (i = KDB_MAXBPT - 1; i >= 0; i--) {
+		kdb_bp_t *bp = &kdb_breakpoints[i];
+
+		if (KDB_DEBUG(BP)) {
+			kdb_printf("%s: bp %d bp_enabled %d\n",
+				   __func__, i, bp->bp_enabled);
+		}
+		if (bp->bp_enabled)
+			_kdb_bp_remove(bp);
+	}
+}
+
+
+/*
+ * kdb_printbp
+ *
+ *	Internal function to format and print a breakpoint entry.
+ *
+ * Parameters:
+ *	None.
+ * Outputs:
+ *	None.
+ * Returns:
+ *	None.
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+
+static void kdb_printbp(kdb_bp_t *bp, int i)
+{
+	kdb_printf("%s ", kdb_bptype(bp));
+	kdb_printf("BP #%d at ", i);
+	kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT);
+
+	if (bp->bp_enabled)
+		kdb_printf("\n    is enabled");
+	else
+		kdb_printf("\n    is disabled");
+
+	kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n",
+		   bp->bp_addr, bp->bp_type, bp->bp_installed);
+
+	kdb_printf("\n");
+}
+
+/*
+ * kdb_bp
+ *
+ *	Handle the bp commands.
+ *
+ *	[bp|bph] <addr-expression> [DATAR|DATAW]
+ *
+ * Parameters:
+ *	argc	Count of arguments in argv
+ *	argv	Space delimited command line arguments
+ * Outputs:
+ *	None.
+ * Returns:
+ *	Zero for success, a kdb diagnostic if failure.
+ * Locking:
+ *	None.
+ * Remarks:
+ *
+ *	bp	Set breakpoint on all cpus.  Only use hardware assist if need.
+ *	bph	Set breakpoint on all cpus.  Force hardware register
+ */
+
+static int kdb_bp(int argc, const char **argv)
+{
+	int i, bpno;
+	kdb_bp_t *bp, *bp_check;
+	int diag;
+	int free;
+	char *symname = NULL;
+	long offset = 0ul;
+	int nextarg;
+	kdb_bp_t template = {0};
+
+	if (argc == 0) {
+		/*
+		 * Display breakpoint table
+		 */
+		for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT;
+		     bpno++, bp++) {
+			if (bp->bp_free)
+				continue;
+			kdb_printbp(bp, bpno);
+		}
+
+		return 0;
+	}
+
+	nextarg = 1;
+	diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr,
+			     &offset, &symname);
+	if (diag)
+		return diag;
+	if (!template.bp_addr)
+		return KDB_BADINT;
+
+	/*
+	 * Find an empty bp structure to allocate
+	 */
+	free = KDB_MAXBPT;
+	for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) {
+		if (bp->bp_free)
+			break;
+	}
+
+	if (bpno == KDB_MAXBPT)
+		return KDB_TOOMANYBPT;
+
+	if (strcmp(argv[0], "bph") == 0) {
+		template.bp_type = BP_HARDWARE_BREAKPOINT;
+		diag = kdb_parsebp(argc, argv, &nextarg, &template);
+		if (diag)
+			return diag;
+	} else {
+		template.bp_type = BP_BREAKPOINT;
+	}
+
+	/*
+	 * Check for clashing breakpoints.
+	 *
+	 * Note, in this design we can't have hardware breakpoints
+	 * enabled for both read and write on the same address.
+	 */
+	for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT;
+	     i++, bp_check++) {
+		if (!bp_check->bp_free &&
+		    bp_check->bp_addr == template.bp_addr) {
+			kdb_printf("You already have a breakpoint at "
+				   kdb_bfd_vma_fmt0 "\n", template.bp_addr);
+			return KDB_DUPBPT;
+		}
+	}
+
+	template.bp_enabled = 1;
+
+	/*
+	 * Actually allocate the breakpoint found earlier
+	 */
+	*bp = template;
+	bp->bp_free = 0;
+
+	kdb_printbp(bp, bpno);
+
+	return 0;
+}
+
+/*
+ * kdb_bc
+ *
+ *	Handles the 'bc', 'be', and 'bd' commands
+ *
+ *	[bd|bc|be] <breakpoint-number>
+ *	[bd|bc|be] *
+ *
+ * Parameters:
+ *	argc	Count of arguments in argv
+ *	argv	Space delimited command line arguments
+ * Outputs:
+ *	None.
+ * Returns:
+ *	Zero for success, a kdb diagnostic for failure
+ * Locking:
+ *	None.
+ * Remarks:
+ */
+static int kdb_bc(int argc, const char **argv)
+{
+	unsigned long addr;
+	kdb_bp_t *bp = NULL;
+	int lowbp = KDB_MAXBPT;
+	int highbp = 0;
+	int done = 0;
+	int i;
+	int diag = 0;
+
+	int cmd;			/* KDBCMD_B? */
+#define KDBCMD_BC	0
+#define KDBCMD_BE	1
+#define KDBCMD_BD	2
+
+	if (strcmp(argv[0], "be") == 0)
+		cmd = KDBCMD_BE;
+	else if (strcmp(argv[0], "bd") == 0)
+		cmd = KDBCMD_BD;
+	else
+		cmd = KDBCMD_BC;
+
+	if (argc != 1)
+		return KDB_ARGCOUNT;
+
+	if (strcmp(argv[1], "*") == 0) {
+		lowbp = 0;
+		highbp = KDB_MAXBPT;
+	} else {
+		diag = kdbgetularg(argv[1], &addr);
+		if (diag)
+			return diag;
+
+		/*
+		 * For addresses less than the maximum breakpoint number,
+		 * assume that the breakpoint number is desired.
+		 */
+		if (addr < KDB_MAXBPT) {
+			bp = &kdb_breakpoints[addr];
+			lowbp = highbp = addr;
+			highbp++;
+		} else {
+			for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT;
+			    i++, bp++) {
+				if (bp->bp_addr == addr) {
+					lowbp = highbp = i;
+					highbp++;
+					break;
+				}
+			}
+		}
+	}
+
+	/*
+	 * Now operate on the set of breakpoints matching the input
+	 * criteria (either '*' for all, or an individual breakpoint).
+	 */
+	for (bp = &kdb_breakpoints[lowbp], i = lowbp;
+	    i < highbp;
+	    i++, bp++) {
+		if (bp->bp_free)
+			continue;
+
+		done++;
+
+		switch (cmd) {
+		case KDBCMD_BC:
+			bp->bp_enabled = 0;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " cleared\n",
+				   i, bp->bp_addr);
+
+			bp->bp_addr = 0;
+			bp->bp_free = 1;
+
+			break;
+		case KDBCMD_BE:
+			bp->bp_enabled = 1;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " enabled",
+				   i, bp->bp_addr);
+
+			kdb_printf("\n");
+			break;
+		case KDBCMD_BD:
+			if (!bp->bp_enabled)
+				break;
+
+			bp->bp_enabled = 0;
+
+			kdb_printf("Breakpoint %d at "
+				   kdb_bfd_vma_fmt " disabled\n",
+				   i, bp->bp_addr);
+
+			break;
+		}
+		if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) {
+			bp->bp_delay = 0;
+			KDB_STATE_CLEAR(SSBPT);
+		}
+	}
+
+	return (!done) ? KDB_BPTNOTFOUND : 0;
+}
+
+/*
+ * kdb_ss
+ *
+ *	Process the 'ss' (Single Step) and 'ssb' (Single Step to Branch)
+ *	commands.
+ *
+ *	ss
+ *	ssb
+ *
+ * Parameters:
+ *	argc	Argument count
+ *	argv	Argument vector
+ * Outputs:
+ *	None.
+ * Returns:
+ *	KDB_CMD_SS[B] for success, a kdb error if failure.
+ * Locking:
+ *	None.
+ * Remarks:
+ *
+ *	Set the arch specific option to trigger a debug trap after the next
+ *	instruction.
+ *
+ *	For 'ssb', set the trace flag in the debug trap handler
+ *	after printing the current insn and return directly without
+ *	invoking the kdb command processor, until a branch instruction
+ *	is encountered.
+ */
+
+static int kdb_ss(int argc, const char **argv)
+{
+	int ssb = 0;
+
+	ssb = (strcmp(argv[0], "ssb") == 0);
+	if (argc != 0)
+		return KDB_ARGCOUNT;
+	/*
+	 * Set trace flag and go.
+	 */
+	KDB_STATE_SET(DOING_SS);
+	if (ssb) {
+		KDB_STATE_SET(DOING_SSB);
+		return KDB_CMD_SSB;
+	}
+	return KDB_CMD_SS;
+}
+
+/* Initialize the breakpoint table and register	breakpoint commands. */
+
+void __init kdb_initbptab(void)
+{
+	int i;
+	kdb_bp_t *bp;
+
+	/*
+	 * First time initialization.
+	 */
+	memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints));
+
+	for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++)
+		bp->bp_free = 1;
+
+	kdb_register_repeat("bp", kdb_bp, "[<vaddr>]",
+		"Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("bl", kdb_bp, "[<vaddr>]",
+		"Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
+	if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)
+		kdb_register_repeat("bph", kdb_bp, "[<vaddr>]",
+		"[datar [length]|dataw [length]]   Set hw brk", 0, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("bc", kdb_bc, "<bpnum>",
+		"Clear Breakpoint", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("be", kdb_bc, "<bpnum>",
+		"Enable Breakpoint", 0, KDB_REPEAT_NONE);
+	kdb_register_repeat("bd", kdb_bc, "<bpnum>",
+		"Disable Breakpoint", 0, KDB_REPEAT_NONE);
+
+	kdb_register_repeat("ss", kdb_ss, "",
+		"Single Step", 1, KDB_REPEAT_NO_ARGS);
+	kdb_register_repeat("ssb", kdb_ss, "",
+		"Single step to branch/call", 0, KDB_REPEAT_NO_ARGS);
+	/*
+	 * Architecture dependent initialization.
+	 */
+}