diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 57 | ||||
| -rw-r--r-- | init/calibrate.c | 60 | ||||
| -rw-r--r-- | init/do_mounts.c | 10 | ||||
| -rw-r--r-- | init/do_mounts.h | 1 | ||||
| -rw-r--r-- | init/do_mounts_md.c | 40 | ||||
| -rw-r--r-- | init/do_mounts_rd.c | 37 | ||||
| -rw-r--r-- | init/initramfs.c | 22 | ||||
| -rw-r--r-- | init/main.c | 54 | ||||
| -rw-r--r-- | init/version.c | 3 |
9 files changed, 121 insertions, 163 deletions
diff --git a/init/Kconfig b/init/Kconfig index 6199d11..8a8e2d0 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -171,7 +171,7 @@ config BSD_PROCESS_ACCT_V3 process and it's parent. Note that this file format is incompatible with previous v0/v1/v2 file formats, so you will need updated tools for processing it. A preliminary version of these tools is available - at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>. + at <http://www.gnu.org/software/acct/>. config TASKSTATS bool "Export task/process statistics through netlink (EXPERIMENTAL)" @@ -486,7 +486,7 @@ config PID_NS default n depends on NAMESPACES && EXPERIMENTAL help - Suport process id namespaces. This allows having multiple + Support process id namespaces. This allows having multiple process with the same pid as long as they are in different pid namespaces. This is a building block of containers. @@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE Enabling this option will pass "-Os" instead of "-O2" to gcc resulting in a smaller kernel. - If unsure, say N. + If unsure, say Y. config SYSCTL bool @@ -558,17 +558,6 @@ config SYSCTL_SYSCALL If unsure say Y here. -config SYSCTL_SYSCALL_CHECK - bool "Sysctl checks" if EMBEDDED - depends on SYSCTL_SYSCALL - default y - ---help--- - sys_sysctl uses binary paths that have been found challenging - to properly maintain and use. This enables checks that help - you to keep things correct. - - If unsure say Y here. - config KALLSYMS bool "Load all symbols for debugging/ksymoops" if EMBEDDED default y @@ -790,18 +779,12 @@ config MARKERS source "arch/Kconfig" -config PROC_PAGE_MONITOR - default y - depends on PROC_FS && MMU - bool "Enable /proc page monitoring" if EMBEDDED - help - Various /proc files exist to monitor process memory utilization: - /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap, - /proc/kpagecount, and /proc/kpageflags. Disabling these - interfaces will reduce the size of the kernel by approximately 4kb. - endmenu # General setup +config HAVE_GENERIC_DMA_COHERENT + bool + default n + config SLABINFO bool depends on PROC_FS @@ -841,9 +824,10 @@ menuconfig MODULES If unsure, say Y. +if MODULES + config MODULE_FORCE_LOAD bool "Forced module loading" - depends on MODULES default n help Allow loading of modules without version information (ie. modprobe @@ -852,12 +836,11 @@ config MODULE_FORCE_LOAD config MODULE_UNLOAD bool "Module unloading" - depends on MODULES help Without this option you will not be able to unload any modules (note that some modules may not be unloadable - anyway), which makes your kernel slightly smaller and - simpler. If unsure, say Y. + anyway), which makes your kernel smaller, faster + and simpler. If unsure, say Y. config MODULE_FORCE_UNLOAD bool "Forced module unloading" @@ -871,7 +854,6 @@ config MODULE_FORCE_UNLOAD config MODVERSIONS bool "Module versioning support" - depends on MODULES help Usually, you have to use modules compiled with your kernel. Saying Y here makes it sometimes possible to use modules @@ -882,7 +864,6 @@ config MODVERSIONS config MODULE_SRCVERSION_ALL bool "Source checksum for all modules" - depends on MODULES help Modules which contain a MODULE_VERSION get an extra "srcversion" field inserted into their modinfo section, which contains a @@ -893,16 +874,12 @@ config MODULE_SRCVERSION_ALL will be created for all modules. If unsure, say N. config KMOD - bool "Automatic kernel module loading" - depends on MODULES - help - Normally when you have selected some parts of the kernel to - be created as kernel modules, you must load them (using the - "modprobe" command) before you can use them. If you say Y - here, some parts of the kernel will be able to load modules - automatically: when a part of the kernel needs a module, it - runs modprobe with the appropriate arguments, thereby - loading the module if it is available. If unsure, say Y. + def_bool y + help + This is being removed soon. These days, CONFIG_MODULES + implies CONFIG_KMOD, so use that instead. + +endif # MODULES config STOP_MACHINE bool diff --git a/init/calibrate.c b/init/calibrate.c index ecb3822..a379c90 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -8,7 +8,9 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/timex.h> +#include <linux/smp.h> +unsigned long lpj_fine; unsigned long preset_lpj; static int __init lpj_setup(char *str) { @@ -33,9 +35,9 @@ static unsigned long __cpuinit calibrate_delay_direct(void) unsigned long pre_start, start, post_start; unsigned long pre_end, end, post_end; unsigned long start_jiffies; - unsigned long tsc_rate_min, tsc_rate_max; - unsigned long good_tsc_sum = 0; - unsigned long good_tsc_count = 0; + unsigned long timer_rate_min, timer_rate_max; + unsigned long good_timer_sum = 0; + unsigned long good_timer_count = 0; int i; if (read_current_timer(&pre_start) < 0 ) @@ -79,22 +81,24 @@ static unsigned long __cpuinit calibrate_delay_direct(void) } read_current_timer(&post_end); - tsc_rate_max = (post_end - pre_start) / DELAY_CALIBRATION_TICKS; - tsc_rate_min = (pre_end - post_start) / DELAY_CALIBRATION_TICKS; + timer_rate_max = (post_end - pre_start) / + DELAY_CALIBRATION_TICKS; + timer_rate_min = (pre_end - post_start) / + DELAY_CALIBRATION_TICKS; /* - * If the upper limit and lower limit of the tsc_rate is + * If the upper limit and lower limit of the timer_rate is * >= 12.5% apart, redo calibration. */ if (pre_start != 0 && pre_end != 0 && - (tsc_rate_max - tsc_rate_min) < (tsc_rate_max >> 3)) { - good_tsc_count++; - good_tsc_sum += tsc_rate_max; + (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) { + good_timer_count++; + good_timer_sum += timer_rate_max; } } - if (good_tsc_count) - return (good_tsc_sum/good_tsc_count); + if (good_timer_count) + return (good_timer_sum/good_timer_count); printk(KERN_WARNING "calibrate_delay_direct() failed to get a good " "estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n"); @@ -108,6 +112,10 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;} * This is the number of bits of precision for the loops_per_jiffy. Each * bit takes on average 1.5/HZ seconds. This (like the original) is a little * better than 1% + * For the boot cpu we can skip the delay calibration and assign it a value + * calculated based on the timer frequency. + * For the rest of the CPUs we cannot assume that the timer frequency is same as + * the cpu frequency, hence do the calibration for those. */ #define LPS_PREC 8 @@ -118,20 +126,20 @@ void __cpuinit calibrate_delay(void) if (preset_lpj) { loops_per_jiffy = preset_lpj; - printk("Calibrating delay loop (skipped)... " - "%lu.%02lu BogoMIPS preset\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100); + printk(KERN_INFO + "Calibrating delay loop (skipped) preset value.. "); + } else if ((smp_processor_id() == 0) && lpj_fine) { + loops_per_jiffy = lpj_fine; + printk(KERN_INFO + "Calibrating delay loop (skipped), " + "value calculated using timer frequency.. "); } else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) { - printk("Calibrating delay using timer specific routine.. "); - printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, - loops_per_jiffy); + printk(KERN_INFO + "Calibrating delay using timer specific routine.. "); } else { loops_per_jiffy = (1<<12); - printk(KERN_DEBUG "Calibrating delay loop... "); + printk(KERN_INFO "Calibrating delay loop... "); while ((loops_per_jiffy <<= 1) != 0) { /* wait for "start of" clock tick */ ticks = jiffies; @@ -161,12 +169,8 @@ void __cpuinit calibrate_delay(void) if (jiffies != ticks) /* longer than 1 tick */ loops_per_jiffy &= ~loopbit; } - - /* Round the value and print it */ - printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, - loops_per_jiffy); } - + printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy/(500000/HZ), + (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); } diff --git a/init/do_mounts.c b/init/do_mounts.c index 660c1e5..d055b19 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -12,6 +12,7 @@ #include <linux/device.h> #include <linux/init.h> #include <linux/fs.h> +#include <linux/initrd.h> #include <linux/nfs_fs.h> #include <linux/nfs_fs_sb.h> @@ -22,7 +23,7 @@ int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */ int root_mountflags = MS_RDONLY | MS_SILENT; -char * __initdata root_device_name; +static char * __initdata root_device_name; static char __initdata saved_root_name[64]; static int __initdata root_wait; @@ -262,6 +263,10 @@ retry: printk("Please append a correct \"root=\" boot option; here are the available partitions:\n"); printk_all_partitions(); +#ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT + printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify " + "explicit textual name for \"root=\" boot option.\n"); +#endif panic("VFS: Unable to mount root fs on %s", b); } @@ -372,7 +377,8 @@ void __init prepare_namespace(void) if (saved_root_name[0]) { root_device_name = saved_root_name; - if (!strncmp(root_device_name, "mtd", 3)) { + if (!strncmp(root_device_name, "mtd", 3) || + !strncmp(root_device_name, "ubi", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } diff --git a/init/do_mounts.h b/init/do_mounts.h index 735705d..9aa968d 100644 --- a/init/do_mounts.h +++ b/init/do_mounts.h @@ -11,7 +11,6 @@ void change_floppy(char *fmt, ...); void mount_block_root(char *name, int flags); void mount_root(void); extern int root_mountflags; -extern char *root_device_name; static inline int create_dev(char *name, dev_t dev) { diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index 693d246..48b3fad 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -12,7 +12,12 @@ * The code for that is here. */ -static int __initdata raid_noautodetect, raid_autopart; +#ifdef CONFIG_MD_AUTODETECT +static int __initdata raid_noautodetect; +#else +static int __initdata raid_noautodetect=1; +#endif +static int __initdata raid_autopart; static struct { int minor; @@ -252,6 +257,8 @@ static int __init raid_setup(char *str) if (!strncmp(str, "noautodetect", wlen)) raid_noautodetect = 1; + if (!strncmp(str, "autodetect", wlen)) + raid_noautodetect = 0; if (strncmp(str, "partitionable", wlen)==0) raid_autopart = 1; if (strncmp(str, "part", wlen)==0) @@ -264,17 +271,32 @@ static int __init raid_setup(char *str) __setup("raid=", raid_setup); __setup("md=", md_setup); +static void autodetect_raid(void) +{ + int fd; + + /* + * Since we don't want to detect and use half a raid array, we need to + * wait for the known devices to complete their probing + */ + printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n"); + printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n"); + while (driver_probe_done() < 0) + msleep(100); + fd = sys_open("/dev/md0", 0, 0); + if (fd >= 0) { + sys_ioctl(fd, RAID_AUTORUN, raid_autopart); + sys_close(fd); + } +} + void __init md_run_setup(void) { create_dev("/dev/md0", MKDEV(MD_MAJOR, 0)); + if (raid_noautodetect) - printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n"); - else { - int fd = sys_open("/dev/md0", 0, 0); - if (fd >= 0) { - sys_ioctl(fd, RAID_AUTORUN, raid_autopart); - sys_close(fd); - } - } + printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n"); + else + autodetect_raid(); md_setup_drive(); } diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index 46dfd64..fedef93 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -10,8 +10,6 @@ #include "do_mounts.h" -#define BUILD_CRAMDISK - int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ static int __init prompt_ramdisk(char *str) @@ -162,14 +160,8 @@ int __init rd_load_image(char *from) goto done; if (nblocks == 0) { -#ifdef BUILD_CRAMDISK if (crd_load(in_fd, out_fd) == 0) goto successful_load; -#else - printk(KERN_NOTICE - "RAMDISK: Kernel does not support compressed " - "RAM disk images\n"); -#endif goto done; } @@ -267,8 +259,6 @@ int __init rd_load_disk(int n) return rd_load_image("/dev/root"); } -#ifdef BUILD_CRAMDISK - /* * gzip declarations */ @@ -313,32 +303,11 @@ static int crd_infd, crd_outfd; static int __init fill_inbuf(void); static void __init flush_window(void); -static void __init *malloc(size_t size); -static void __init free(void *where); static void __init error(char *m); -static void __init gzip_mark(void **); -static void __init gzip_release(void **); - -#include "../lib/inflate.c" -static void __init *malloc(size_t size) -{ - return kmalloc(size, GFP_KERNEL); -} - -static void __init free(void *where) -{ - kfree(where); -} - -static void __init gzip_mark(void **ptr) -{ -} - -static void __init gzip_release(void **ptr) -{ -} +#define NO_INFLATE_MALLOC +#include "../lib/inflate.c" /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty @@ -425,5 +394,3 @@ static int __init crd_load(int in_fd, int out_fd) kfree(window); return result; } - -#endif /* BUILD_CRAMDISK */ diff --git a/init/initramfs.c b/init/initramfs.c index 8eeeccb..644fc01 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -14,16 +14,6 @@ static void __init error(char *x) message = x; } -static void __init *malloc(size_t size) -{ - return kmalloc(size, GFP_KERNEL); -} - -static void __init free(void *where) -{ - kfree(where); -} - /* link hash */ #define N_ALIGN(len) ((((len) + 1) & ~3) + 2) @@ -407,18 +397,10 @@ static long bytes_out; static void __init flush_window(void); static void __init error(char *m); -static void __init gzip_mark(void **); -static void __init gzip_release(void **); -#include "../lib/inflate.c" +#define NO_INFLATE_MALLOC -static void __init gzip_mark(void **ptr) -{ -} - -static void __init gzip_release(void **ptr) -{ -} +#include "../lib/inflate.c" /* =========================================================================== * Write the output window window[0..outcnt-1] and update crc and bytes_out. diff --git a/init/main.c b/init/main.c index b44e4eb..6aaff34 100644 --- a/init/main.c +++ b/init/main.c @@ -23,7 +23,6 @@ #include <linux/init.h> #include <linux/smp_lock.h> #include <linux/initrd.h> -#include <linux/hdreg.h> #include <linux/bootmem.h> #include <linux/tty.h> #include <linux/gfp.h> @@ -32,6 +31,7 @@ #include <linux/kernel_stat.h> #include <linux/start_kernel.h> #include <linux/security.h> +#include <linux/smp.h> #include <linux/workqueue.h> #include <linux/profile.h> #include <linux/rcupdate.h> @@ -87,8 +87,6 @@ extern void init_IRQ(void); extern void fork_init(unsigned long); extern void mca_init(void); extern void sbus_init(void); -extern void pidhash_init(void); -extern void pidmap_init(void); extern void prio_tree_init(void); extern void radix_tree_init(void); extern void free_initmem(void); @@ -415,6 +413,13 @@ static void __init smp_init(void) { unsigned int cpu; + /* + * Set up the current CPU as possible to migrate to. + * The other ones will be done by cpu_up/cpu_down() + */ + cpu = smp_processor_id(); + cpu_set(cpu, cpu_active_map); + /* FIXME: This should be done in userspace --RR */ for_each_present_cpu(cpu) { if (num_online_cpus() >= setup_max_cpus) @@ -636,9 +641,11 @@ asmlinkage void __init start_kernel(void) #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start && !initrd_below_start_ok && - initrd_start < min_low_pfn << PAGE_SHIFT) { + page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) { printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - " - "disabling it.\n",initrd_start,min_low_pfn << PAGE_SHIFT); + "disabling it.\n", + page_to_pfn(virt_to_page((void *)initrd_start)), + min_low_pfn); initrd_start = 0; } #endif @@ -691,7 +698,7 @@ asmlinkage void __init start_kernel(void) rest_init(); } -static int __initdata initcall_debug; +static int initcall_debug; static int __init initcall_debug_setup(char *str) { @@ -700,7 +707,7 @@ static int __init initcall_debug_setup(char *str) } __setup("initcall_debug", initcall_debug_setup); -static void __init do_one_initcall(initcall_t fn) +int do_one_initcall(initcall_t fn) { int count = preempt_count(); ktime_t t0, t1, delta; @@ -708,7 +715,7 @@ static void __init do_one_initcall(initcall_t fn) int result; if (initcall_debug) { - print_fn_descriptor_symbol("calling %s\n", fn); + printk("calling %pF @ %i\n", fn, task_pid_nr(current)); t0 = ktime_get(); } @@ -718,8 +725,8 @@ static void __init do_one_initcall(initcall_t fn) t1 = ktime_get(); delta = ktime_sub(t1, t0); - print_fn_descriptor_symbol("initcall %s", fn); - printk(" returned %d after %Ld msecs\n", result, + printk("initcall %pF returned %d after %Ld msecs\n", + fn, result, (unsigned long long) delta.tv64 >> 20); } @@ -737,19 +744,20 @@ static void __init do_one_initcall(initcall_t fn) local_irq_enable(); } if (msgbuf[0]) { - print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn); - printk(" returned with %s\n", msgbuf); + printk("initcall %pF returned with %s\n", fn, msgbuf); } + + return result; } -extern initcall_t __initcall_start[], __initcall_end[]; +extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[]; static void __init do_initcalls(void) { initcall_t *call; - for (call = __initcall_start; call < __initcall_end; call++) + for (call = __early_initcall_end; call < __initcall_end; call++) do_one_initcall(*call); /* Make sure there is no pending stuff from the initcall sequence */ @@ -765,6 +773,7 @@ static void __init do_initcalls(void) */ static void __init do_basic_setup(void) { + rcu_init_sched(); /* needed by module_init stage. */ /* drivers will send hotplug events */ init_workqueues(); usermodehelper_init(); @@ -773,23 +782,12 @@ static void __init do_basic_setup(void) do_initcalls(); } -static int __initdata nosoftlockup; - -static int __init nosoftlockup_setup(char *str) -{ - nosoftlockup = 1; - return 1; -} -__setup("nosoftlockup", nosoftlockup_setup); - static void __init do_pre_smp_initcalls(void) { - extern int spawn_ksoftirqd(void); + initcall_t *call; - migration_init(); - spawn_ksoftirqd(); - if (!nosoftlockup) - spawn_softlockup_task(); + for (call = __initcall_start; call < __early_initcall_end; call++) + do_one_initcall(*call); } static void run_init_process(char *init_filename) diff --git a/init/version.c b/init/version.c index 9d17d70..52a8b98 100644 --- a/init/version.c +++ b/init/version.c @@ -13,10 +13,13 @@ #include <linux/utsrelease.h> #include <linux/version.h> +#ifndef CONFIG_KALLSYMS #define version(a) Version_ ## a #define version_string(a) version(a) +extern int version_string(LINUX_VERSION_CODE); int version_string(LINUX_VERSION_CODE); +#endif struct uts_namespace init_uts_ns = { .kref = { |
