diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-sh/cpu-sh3/dma.h | 10 | ||||
| -rw-r--r-- | include/asm-sh/hw_irq.h | 19 | ||||
| -rw-r--r-- | include/asm-sh/io.h | 12 | ||||
| -rw-r--r-- | include/asm-sh/keyboard.h | 13 | ||||
| -rw-r--r-- | include/asm-sh/mmu_context.h | 4 | ||||
| -rw-r--r-- | include/asm-sh/mmzone.h | 2 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/dma.h | 303 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/io.h | 22 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/keyboard.h | 60 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/m1543c.h | 200 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/mc146818rtc.h | 6 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/mpc1211.h | 18 | ||||
| -rw-r--r-- | include/asm-sh/mpc1211/pci.h | 38 | ||||
| -rw-r--r-- | include/asm-sh/r7780rp.h | 4 | ||||
| -rw-r--r-- | include/asm-sh/tlb_64.h | 10 | ||||
| -rw-r--r-- | include/asm-sh/topology.h | 11 | ||||
| -rw-r--r-- | include/asm-sh/uaccess_64.h | 2 |
17 files changed, 59 insertions, 675 deletions
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h index 092ff9d..6813c32 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/include/asm-sh/cpu-sh3/dma.h @@ -3,19 +3,19 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) #define DMTE0_IRQ 48 #define DMTE1_IRQ 49 #define DMTE2_IRQ 50 #define DMTE3_IRQ 51 #define DMTE4_IRQ 76 #define DMTE5_IRQ 77 - -#else -#define SH_DMAC_BASE 0xa4000020 #endif /* Definitions for the SuperH DMAC */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index c958fda..7438d1e 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,6 +79,10 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; +#ifdef CONFIG_CPU_SH3 + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif }; #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) @@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = { \ chipname, \ } +#ifdef CONFIG_CPU_SH3 +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + void __init register_intc_controller(struct intc_desc *desc); int intc_set_priority(unsigned int irq, unsigned int prio); void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 356e50d..a4fbf0c 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr); unsigned long long poke_real_address_q(unsigned long long addr, unsigned long long val); -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); - #if !defined(CONFIG_MMU) #define virt_to_phys(address) ((unsigned long)(address)) #define phys_to_virt(address) ((void *)(address)) @@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr); void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags); void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); #else #define __ioremap(offset, size, flags) ((void __iomem *)(offset)) #define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) #endif /* CONFIG_MMU */ static inline void __iomem * diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h deleted file mode 100644 index 31dcc4f..0000000 --- a/include/asm-sh/keyboard.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_KEYBOARD_H -#define __ASM_SH_KEYBOARD_H -/* - * $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $ - */ - -#include <linux/kd.h> -#include <asm/machvec.h> - -#ifdef CONFIG_SH_MPC1211 -#include <asm/mpc1211/keyboard-mpc1211.h> -#endif -#endif diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index fe58d00..87e812f 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,6 +27,7 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 +#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) @@ -38,7 +39,6 @@ */ #define MMU_VPN_MASK 0xfffff000 -#ifdef CONFIG_MMU #if defined(CONFIG_SUPERH32) #include "mmu_context_32.h" #else @@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev, #define destroy_context(mm) do { } while (0) #define set_asid(asid) do { } while (0) #define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) #define set_TTB(pgd) do { } while (0) #define get_TTB() (0) #define activate_context(mm,cpu) do { } while (0) diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h index 7969f38..2969253 100644 --- a/include/asm-sh/mmzone.h +++ b/include/asm-sh/mmzone.h @@ -41,6 +41,8 @@ void __init plat_mem_setup(void); /* arch/sh/kernel/setup.c */ void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); #endif /* __KERNEL__ */ #endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h deleted file mode 100644 index e506d1a..0000000 --- a/include/asm-sh/mpc1211/dma.h +++ /dev/null @@ -1,303 +0,0 @@ -/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_MPC1211_DMA_H -#define _ASM_MPC1211_DMA_H - -#include <linux/spinlock.h> /* And spinlocks */ -#include <asm/io.h> /* need byte IO */ -#include <linux/delay.h> - - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_PAGE_0 0x87 /* DMA page registers */ -#define DMA_PAGE_1 0x83 -#define DMA_PAGE_2 0x81 -#define DMA_PAGE_3 0x82 -#define DMA_PAGE_5 0x8B -#define DMA_PAGE_6 0x89 -#define DMA_PAGE_7 0x8A - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr) -{ - switch(dmanr) { - case 0: - dma_outb( pagenr & 0xff, DMA_PAGE_0); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400); - break; - case 1: - dma_outb( pagenr & 0xff, DMA_PAGE_1); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400); - break; - case 2: - dma_outb( pagenr & 0xff, DMA_PAGE_2); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400); - break; - case 3: - dma_outb( pagenr & 0xff, DMA_PAGE_3); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400); - break; - case 5: - dma_outb( pagenr & 0xfe, DMA_PAGE_5); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400); - break; - case 6: - dma_outb( pagenr & 0xfe, DMA_PAGE_6); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400); - break; - case 7: - dma_outb( pagenr & 0xfe, DMA_PAGE_7); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400); - break; - } -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - set_dma_page(dmanr, a>>16); - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_MPC1211_DMA_H */ diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h deleted file mode 100644 index 6298370..0000000 --- a/include/asm-sh/mpc1211/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/mpc1211/io.h - * - * Copyright 2001 Saito.K & Jeanne - * - * IO functions for an Interface MPC-1211 - */ - -#ifndef _ASM_SH_IO_MPC1211_H -#define _ASM_SH_IO_MPC1211_H - -#include <linux/time.h> - -extern int mpc1211_irq_demux(int irq); - -extern void init_mpc1211_IRQ(void); -extern void heartbeat_mpc1211(void); - -extern void mpc1211_rtc_gettimeofday(struct timeval *tv); -extern int mpc1211_rtc_settimeofday(const struct timeval *tv); - -#endif /* _ASM_SH_IO_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h deleted file mode 100644 index 9020fee..0000000 --- a/include/asm-sh/mpc1211/keyboard.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * MPC1211 specific keybord definitions - * Taken from the old asm-i386/keybord.h for PC/AT-style definitions - * created 3 Nov 1996 by Geert Uytterhoeven. - */ - -#ifdef __KERNEL__ - -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/kd.h> -#include <linux/pm.h> -#include <asm/io.h> - -#define KEYBOARD_IRQ 1 -#define DISABLE_KBD_DURING_INTERRUPTS 0 - -extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int pckbd_getkeycode(unsigned int scancode); -extern int pckbd_translate(unsigned char scancode, unsigned char *keycode, - char raw_mode); -extern char pckbd_unexpected_up(unsigned char keycode); -extern void pckbd_leds(unsigned char leds); -extern void pckbd_init_hw(void); -extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *); -extern pm_callback pm_kbd_request_override; - -#define kbd_setkeycode pckbd_setkeycode -#define kbd_getkeycode pckbd_getkeycode -#define kbd_translate pckbd_translate -#define kbd_unexpected_up pckbd_unexpected_up -#define kbd_leds pckbd_leds -#define kbd_init_hw pckbd_init_hw - -/* resource allocation */ -#define kbd_request_region() -#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \ - "keyboard", NULL) - -/* How to access the keyboard macros on this platform. */ -#define kbd_read_input() inb(KBD_DATA_REG) -#define kbd_read_status() inb(KBD_STATUS_REG) -#define kbd_write_output(val) outb(val, KBD_DATA_REG) -#define kbd_write_command(val) outb(val, KBD_CNTL_REG) - -/* Some stoneage hardware needs delays after some operations. */ -#define kbd_pause() do { } while(0) - -/* - * Machine specific bits for the PS/2 driver - */ - -#define AUX_IRQ 12 - -#define aux_request_irq(hand, dev_id) \ - request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id) - -#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id) - -#endif /* __KERNEL__ */ diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h deleted file mode 100644 index c95d132..0000000 --- a/include/asm-sh/mpc1211/m1543c.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __ASM_SH_M1543C_H -#define __ASM_SH_M1543C_H - -/* - * linux/include/asm-sh/m1543c.h - * Copyright (C) 2001 Nobuhiro Sakawa - * M1543C:PCI-ISA Bus Bridge with Super IO Chip support - * - * from - * - * linux/include/asm-sh/smc37c93x.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * SMSC 37C93x Super IO Chip support - */ - -/* Default base I/O address */ -#define FDC_PRIMARY_BASE 0x3f0 -#define IDE1_PRIMARY_BASE 0x1f0 -#define IDE1_SECONDARY_BASE 0x170 -#define PARPORT_PRIMARY_BASE 0x378 -#define COM1_PRIMARY_BASE 0x2f8 -#define COM2_PRIMARY_BASE 0x3f8 -#define COM3_PRIMARY_BASE 0x3e8 -#define RTC_PRIMARY_BASE 0x070 -#define KBC_PRIMARY_BASE 0x060 -#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ -#define I8259_M_CR 0x20 -#define I8259_M_MR 0x21 -#define I8259_S_CR 0xa0 -#define I8259_S_MR 0xa1 - -/* Logical device number */ -#define LDN_FDC 0 -#define LDN_IDE1 1 -#define LDN_IDE2 2 -#define LDN_PARPORT 3 -#define LDN_COM1 4 -#define LDN_COM2 5 -#define LDN_COM3 11 -#define LDN_RTC 6 -#define LDN_KBC 7 - -/* Configuration port and key */ -#define CONFIG_PORT 0x3f0 -#define INDEX_PORT CONFIG_PORT -#define DATA_PORT 0x3f1 -#define CONFIG_ENTER1 0x51 -#define CONFIG_ENTER2 0x23 -#define CONFIG_EXIT 0xbb - -/* Configuration index */ -#define CURRENT_LDN_INDEX 0x07 -#define POWER_CONTROL_INDEX 0x22 -#define ACTIVATE_INDEX 0x30 -#define IO_BASE_HI_INDEX 0x60 -#define IO_BASE_LO_INDEX 0x61 -#define IRQ_SELECT_INDEX 0x70 -#define PS2_IRQ_INDEX 0x72 -#define DMA_SELECT_INDEX 0x74 - -/* UART stuff. Only for debugging. */ -/* UART Register */ - -#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ -#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ -#define UART_IER 0x2 /* Interrupt Enable Register */ -#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ -#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ -#define UART_LCR 0x6 /* Line Control Register */ -#define UART_MCR 0x8 /* MODEM Control Register */ -#define UART_LSR 0xa /* Line Status Register */ -#define UART_MSR 0xc /* MODEM Status Register */ -#define UART_SCR 0xe /* Scratch Register */ -#define UART_DLL 0x0 /* Divisor Latch (LS) */ -#define UART_DLM 0x2 /* Divisor Latch (MS) */ - -#ifndef __ASSEMBLY__ -typedef struct uart_reg { - volatile __u16 rbr; - volatile __u16 ier; - volatile __u16 iir; - volatile __u16 lcr; - volatile __u16 mcr; - volatile __u16 lsr; - volatile __u16 msr; - volatile __u16 scr; -} uart_reg; -#endif /* ! __ASSEMBLY__ */ - -/* Alias for Write Only Register */ - -#define thr rbr -#define tcr iir - -/* Alias for Divisor Latch Register */ - -#define dll rbr -#define dlm ier -#define fcr iir - -/* Interrupt Enable Register */ - -#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ -#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ -#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ -#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ - -/* Interrupt Ident Register */ - -#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ -#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ -#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ -#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ -#define IIR_FIFO 0xc000 /* FIFOs enabled */ - -/* FIFO Control Register */ - -#define FCR_FEN 0x0100 /* FIFO enable */ -#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ -#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ -#define FCR_DMA 0x0800 /* DMA mode select */ -#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ -#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ - -/* Line Control Register */ - -#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ -#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ -#define LCR_STB 0x0400 /* Number of Stop Bits */ -#define LCR_PEN 0x0800 /* Parity Enable */ -#define LCR_EPS 0x1000 /* Even Parity Select */ -#define LCR_SP 0x2000 /* Stick Parity */ -#define LCR_SB 0x4000 /* Set Break */ -#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ - -/* MODEM Control Register */ - -#define MCR_DTR 0x0100 /* Data Terminal Ready */ -#define MCR_RTS 0x0200 /* Request to Send */ -#define MCR_OUT1 0x0400 /* Out 1 */ -#define MCR_IRQEN 0x0800 /* IRQ Enable */ -#define MCR_LOOP 0x1000 /* Loop */ - -/* Line Status Register */ - -#define LSR_DR 0x0100 /* Data Ready */ -#define LSR_OE 0x0200 /* Overrun Error */ -#define LSR_PE 0x0400 /* Parity Error */ -#define LSR_FE 0x0800 /* Framing Error */ -#define LSR_BI 0x1000 /* Break Interrupt */ -#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ -#define LSR_TEMT 0x4000 /* Transmitter Empty */ -#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ - -/* MODEM Status Register */ - -#define MSR_DCTS 0x0100 /* Delta Clear to Send */ -#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ -#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ -#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ -#define MSR_CTS 0x1000 /* Clear to Send */ -#define MSR_DSR 0x2000 /* Data Set Ready */ -#define MSR_RI 0x4000 /* Ring Indicator */ -#define MSR_DCD 0x8000 /* Data Carrier Detect */ - -/* Baud Rate Divisor */ - -#define UART_CLK (1843200) /* 1.8432 MHz */ -#define UART_BAUD(x) (UART_CLK / (16 * (x))) - -/* RTC register definition */ -#define RTC_SECONDS 0 -#define RTC_SECONDS_ALARM 1 -#define RTC_MINUTES 2 -#define RTC_MINUTES_ALARM 3 -#define RTC_HOURS 4 -#define RTC_HOURS_ALARM 5 -#define RTC_DAY_OF_WEEK 6 -#define RTC_DAY_OF_MONTH 7 -#define RTC_MONTH 8 -#define RTC_YEAR 9 -#define RTC_FREQ_SELECT 10 -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 -/* This RTC can work under 32.768KHz clock only. */ -# define RTC_OSC_ENABLE 0x20 -# define RTC_OSC_DISABLE 0x00 -#define RTC_CONTROL 11 -# define RTC_SET 0x80 -# define RTC_PIE 0x40 -# define RTC_AIE 0x20 -# define RTC_UIE 0x10 -# define RTC_SQWE 0x08 -# define RTC_DM_BINARY 0x04 -# define RTC_24H 0x02 -# define RTC_DST_EN 0x01 - -#endif /* __ASM_SH_M1543C_H */ diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h deleted file mode 100644 index e245f2a..0000000 --- a/include/asm-sh/mpc1211/mc146818rtc.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * MPC1211 uses PC/AT style RTC definitions. - */ -#include <asm-x86/mc146818rtc_32.h> - - diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h deleted file mode 100644 index fa456c3..0000000 --- a/include/asm-sh/mpc1211/mpc1211.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH_MPC1211_H -#define __ASM_SH_MPC1211_H - -/* - * linux/include/asm-sh/mpc1211.h - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * Interface MPC-1211 support - */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#endif /* __ASM_SH_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h deleted file mode 100644 index d9162c5..0000000 --- a/include/asm-sh/mpc1211/pci.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Low-Level PCI Support for MPC-1211 - * - * (c) 2002 Saito.K & Jeanne - * - */ - -#ifndef _PCI_MPC1211_H_ -#define _PCI_MPC1211_H_ - -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - -/* MPC-1211 Specific Values */ -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#endif /* _PCI_MPC1211_H_ */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index a33838f..306f735 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -193,8 +193,6 @@ #define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) #define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) -unsigned char *highlander_init_irq_r7780mp(void); -unsigned char *highlander_init_irq_r7780rp(void); -unsigned char *highlander_init_irq_r7785rp(void); +unsigned char *highlander_plat_irq_setup(void); #endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h index 0308e05..0a96f3a 100644 --- a/include/asm-sh/tlb_64.h +++ b/include/asm-sh/tlb_64.h @@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot) __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); } +#ifdef CONFIG_MMU /* arch/sh64/mm/tlb.c */ int sh64_tlb_init(void); unsigned long long sh64_next_free_dtlb_entry(void); @@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry); void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, unsigned long asid, unsigned long paddr); void sh64_teardown_tlb_slot(unsigned long long config_addr); - +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h index 34cdb28..95f0085 100644 --- a/include/asm-sh/topology.h +++ b/include/asm-sh/topology.h @@ -29,6 +29,17 @@ .nr_balance_failed = 0, \ } +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) #endif #include <asm-generic/topology.h> diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index f956b7b..a9b68d0 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -274,7 +274,9 @@ struct exception_table_entry unsigned long insn, fixup; }; +#ifdef CONFIG_MMU #define ARCH_HAS_SEARCH_EXTABLE +#endif /* Returns 0 if exception not found and fixup.unit otherwise. */ extern unsigned long search_exception_table(unsigned long addr); |
