diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/soundwire/sdw.h | 332 | ||||
| -rw-r--r-- | include/linux/soundwire/sdw_intel.h | 14 | ||||
| -rw-r--r-- | include/sound/soc-dai.h | 23 |
3 files changed, 368 insertions, 1 deletions
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h index e91fdcf..962971e 100644 --- a/include/linux/soundwire/sdw.h +++ b/include/linux/soundwire/sdw.h @@ -23,9 +23,24 @@ struct sdw_slave; #define SDW_MASTER_DEV_NUM 14 #define SDW_NUM_DEV_ID_REGISTERS 6 +/* frame shape defines */ +/* + * Note: The maximum row define in SoundWire spec 1.1 is 23. In order to + * fill hole with 0, one more dummy entry is added + */ +#define SDW_FRAME_ROWS 24 +#define SDW_FRAME_COLS 8 +#define SDW_FRAME_ROW_COLS (SDW_FRAME_ROWS * SDW_FRAME_COLS) + +#define SDW_FRAME_CTRL_BITS 48 #define SDW_MAX_DEVICES 11 +#define SDW_VALID_PORT_RANGE(n) (n <= 14 && n >= 1) + +#define SDW_DAI_ID_RANGE_START 100 +#define SDW_DAI_ID_RANGE_END 200 + /** * enum sdw_slave_status - Slave status * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus. @@ -61,6 +76,30 @@ enum sdw_command_response { SDW_CMD_FAIL_OTHER = 4, }; +/** + * enum sdw_stream_type: data stream type + * + * @SDW_STREAM_PCM: PCM data stream + * @SDW_STREAM_PDM: PDM data stream + * + * spec doesn't define this, but is used in implementation + */ +enum sdw_stream_type { + SDW_STREAM_PCM = 0, + SDW_STREAM_PDM = 1, +}; + +/** + * enum sdw_data_direction: Data direction + * + * @SDW_DATA_DIR_RX: Data into Port + * @SDW_DATA_DIR_TX: Data out of Port + */ +enum sdw_data_direction { + SDW_DATA_DIR_RX = 0, + SDW_DATA_DIR_TX = 1, +}; + /* * SDW properties, defined in MIPI DisCo spec v1.0 */ @@ -341,11 +380,92 @@ struct sdw_slave_intr_status { }; /** - * struct sdw_slave_ops - Slave driver callback ops + * sdw_reg_bank - SoundWire register banks + * @SDW_BANK0: Soundwire register bank 0 + * @SDW_BANK1: Soundwire register bank 1 + */ +enum sdw_reg_bank { + SDW_BANK0, + SDW_BANK1, +}; + +/** + * struct sdw_bus_conf: Bus configuration + * + * @clk_freq: Clock frequency, in Hz + * @num_rows: Number of rows in frame + * @num_cols: Number of columns in frame + * @bank: Next register bank + */ +struct sdw_bus_conf { + unsigned int clk_freq; + unsigned int num_rows; + unsigned int num_cols; + unsigned int bank; +}; + +/** + * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel + * + * @num: Port number + * @ch_mask: Active channel mask + * @prepare: Prepare (true) /de-prepare (false) channel + * @bank: Register bank, which bank Slave/Master driver should program for + * implementation defined registers. This is always updated to next_bank + * value read from bus params. + * + */ +struct sdw_prepare_ch { + unsigned int num; + unsigned int ch_mask; + bool prepare; + unsigned int bank; +}; + +/** + * enum sdw_port_prep_ops: Prepare operations for Data Port + * + * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port + * @SDW_OPS_PORT_PREP: Prepare operation for the Port + * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port + */ +enum sdw_port_prep_ops { + SDW_OPS_PORT_PRE_PREP = 0, + SDW_OPS_PORT_PREP = 1, + SDW_OPS_PORT_POST_PREP = 2, +}; + +/** + * struct sdw_bus_params: Structure holding bus configuration + * + * @curr_bank: Current bank in use (BANK0/BANK1) + * @next_bank: Next bank to use (BANK0/BANK1). next_bank will always be + * set to !curr_bank + * @max_dr_freq: Maximum double rate clock frequency supported, in Hz + * @curr_dr_freq: Current double rate clock frequency, in Hz + * @bandwidth: Current bandwidth + * @col: Active columns + * @row: Active rows + */ +struct sdw_bus_params { + enum sdw_reg_bank curr_bank; + enum sdw_reg_bank next_bank; + unsigned int max_dr_freq; + unsigned int curr_dr_freq; + unsigned int bandwidth; + unsigned int col; + unsigned int row; +}; + +/** + * struct sdw_slave_ops: Slave driver callback ops + * * @read_prop: Read Slave properties * @interrupt_callback: Device interrupt notification (invoked in thread * context) * @update_status: Update Slave status + * @bus_config: Update the bus config for Slave + * @port_prep: Prepare the port with parameters */ struct sdw_slave_ops { int (*read_prop)(struct sdw_slave *sdw); @@ -353,6 +473,11 @@ struct sdw_slave_ops { struct sdw_slave_intr_status *status); int (*update_status)(struct sdw_slave *slave, enum sdw_slave_status status); + int (*bus_config)(struct sdw_slave *slave, + struct sdw_bus_params *params); + int (*port_prep)(struct sdw_slave *slave, + struct sdw_prepare_ch *prepare_ch, + enum sdw_port_prep_ops pre_ops); }; /** @@ -406,6 +531,93 @@ int sdw_handle_slave_status(struct sdw_bus *bus, * SDW master structures and APIs */ +/** + * struct sdw_port_params: Data Port parameters + * + * @num: Port number + * @bps: Word length of the Port + * @flow_mode: Port Data flow mode + * @data_mode: Test modes or normal mode + * + * This is used to program the Data Port based on Data Port stream + * parameters. + */ +struct sdw_port_params { + unsigned int num; + unsigned int bps; + unsigned int flow_mode; + unsigned int data_mode; +}; + +/** + * struct sdw_transport_params: Data Port Transport Parameters + * + * @blk_grp_ctrl_valid: Port implements block group control + * @num: Port number + * @blk_grp_ctrl: Block group control value + * @sample_interval: Sample interval + * @offset1: Blockoffset of the payload data + * @offset2: Blockoffset of the payload data + * @hstart: Horizontal start of the payload data + * @hstop: Horizontal stop of the payload data + * @blk_pkg_mode: Block per channel or block per port + * @lane_ctrl: Data lane Port uses for Data transfer. Currently only single + * data lane is supported in bus + * + * This is used to program the Data Port based on Data Port transport + * parameters. All these parameters are banked and can be modified + * during a bank switch without any artifacts in audio stream. + */ +struct sdw_transport_params { + bool blk_grp_ctrl_valid; + unsigned int port_num; + unsigned int blk_grp_ctrl; + unsigned int sample_interval; + unsigned int offset1; + unsigned int offset2; + unsigned int hstart; + unsigned int hstop; + unsigned int blk_pkg_mode; + unsigned int lane_ctrl; +}; + +/** + * struct sdw_enable_ch: Enable/disable Data Port channel + * + * @num: Port number + * @ch_mask: Active channel mask + * @enable: Enable (true) /disable (false) channel + */ +struct sdw_enable_ch { + unsigned int port_num; + unsigned int ch_mask; + bool enable; +}; + +/** + * struct sdw_master_port_ops: Callback functions from bus to Master + * driver to set Master Data ports. + * + * @dpn_set_port_params: Set the Port parameters for the Master Port. + * Mandatory callback + * @dpn_set_port_transport_params: Set transport parameters for the Master + * Port. Mandatory callback + * @dpn_port_prep: Port prepare operations for the Master Data Port. + * @dpn_port_enable_ch: Enable the channels of Master Port. + */ +struct sdw_master_port_ops { + int (*dpn_set_port_params)(struct sdw_bus *bus, + struct sdw_port_params *port_params, + unsigned int bank); + int (*dpn_set_port_transport_params)(struct sdw_bus *bus, + struct sdw_transport_params *transport_params, + enum sdw_reg_bank bank); + int (*dpn_port_prep)(struct sdw_bus *bus, + struct sdw_prepare_ch *prepare_ch); + int (*dpn_port_enable_ch)(struct sdw_bus *bus, + struct sdw_enable_ch *enable_ch, unsigned int bank); +}; + struct sdw_msg; /** @@ -426,6 +638,9 @@ struct sdw_defer { * @xfer_msg: Transfer message callback * @xfer_msg_defer: Defer version of transfer message callback * @reset_page_addr: Reset the SCP page address registers + * @set_bus_conf: Set the bus configuration + * @pre_bank_switch: Callback for pre bank switch + * @post_bank_switch: Callback for post bank switch */ struct sdw_master_ops { int (*read_prop)(struct sdw_bus *bus); @@ -437,6 +652,11 @@ struct sdw_master_ops { struct sdw_defer *defer); enum sdw_command_response (*reset_page_addr) (struct sdw_bus *bus, unsigned int dev_num); + int (*set_bus_conf)(struct sdw_bus *bus, + struct sdw_bus_params *params); + int (*pre_bank_switch)(struct sdw_bus *bus); + int (*post_bank_switch)(struct sdw_bus *bus); + }; /** @@ -449,9 +669,15 @@ struct sdw_master_ops { * @bus_lock: bus lock * @msg_lock: message lock * @ops: Master callback ops + * @port_ops: Master port callback ops + * @params: Current bus parameters * @prop: Master properties + * @m_rt_list: List of Master instance of all stream(s) running on Bus. This + * is used to compute and program bus bandwidth, clock, frame shape, + * transport and port parameters * @defer_msg: Defer message * @clk_stop_timeout: Clock stop timeout computed + * @bank_switch_timeout: Bank switch timeout computed */ struct sdw_bus { struct device *dev; @@ -461,14 +687,118 @@ struct sdw_bus { struct mutex bus_lock; struct mutex msg_lock; const struct sdw_master_ops *ops; + const struct sdw_master_port_ops *port_ops; + struct sdw_bus_params params; struct sdw_master_prop prop; + struct list_head m_rt_list; struct sdw_defer defer_msg; unsigned int clk_stop_timeout; + u32 bank_switch_timeout; }; int sdw_add_bus_master(struct sdw_bus *bus); void sdw_delete_bus_master(struct sdw_bus *bus); +/** + * sdw_port_config: Master or Slave Port configuration + * + * @num: Port number + * @ch_mask: channels mask for port + */ +struct sdw_port_config { + unsigned int num; + unsigned int ch_mask; +}; + +/** + * sdw_stream_config: Master or Slave stream configuration + * + * @frame_rate: Audio frame rate of the stream, in Hz + * @ch_count: Channel count of the stream + * @bps: Number of bits per audio sample + * @direction: Data direction + * @type: Stream type PCM or PDM + */ +struct sdw_stream_config { + unsigned int frame_rate; + unsigned int ch_count; + unsigned int bps; + enum sdw_data_direction direction; + enum sdw_stream_type type; +}; + +/** + * sdw_stream_state: Stream states + * + * @SDW_STREAM_ALLOCATED: New stream allocated. + * @SDW_STREAM_CONFIGURED: Stream configured + * @SDW_STREAM_PREPARED: Stream prepared + * @SDW_STREAM_ENABLED: Stream enabled + * @SDW_STREAM_DISABLED: Stream disabled + * @SDW_STREAM_DEPREPARED: Stream de-prepared + * @SDW_STREAM_RELEASED: Stream released + */ +enum sdw_stream_state { + SDW_STREAM_ALLOCATED = 0, + SDW_STREAM_CONFIGURED = 1, + SDW_STREAM_PREPARED = 2, + SDW_STREAM_ENABLED = 3, + SDW_STREAM_DISABLED = 4, + SDW_STREAM_DEPREPARED = 5, + SDW_STREAM_RELEASED = 6, +}; + +/** + * sdw_stream_params: Stream parameters + * + * @rate: Sampling frequency, in Hz + * @ch_count: Number of channels + * @bps: bits per channel sample + */ +struct sdw_stream_params { + unsigned int rate; + unsigned int ch_count; + unsigned int bps; +}; + +/** + * sdw_stream_runtime: Runtime stream parameters + * + * @name: SoundWire stream name + * @params: Stream parameters + * @state: Current state of the stream + * @type: Stream type PCM or PDM + * @m_rt: Master runtime + */ +struct sdw_stream_runtime { + char *name; + struct sdw_stream_params params; + enum sdw_stream_state state; + enum sdw_stream_type type; + struct sdw_master_runtime *m_rt; +}; + +struct sdw_stream_runtime *sdw_alloc_stream(char *stream_name); +void sdw_release_stream(struct sdw_stream_runtime *stream); +int sdw_stream_add_master(struct sdw_bus *bus, + struct sdw_stream_config *stream_config, + struct sdw_port_config *port_config, + unsigned int num_ports, + struct sdw_stream_runtime *stream); +int sdw_stream_add_slave(struct sdw_slave *slave, + struct sdw_stream_config *stream_config, + struct sdw_port_config *port_config, + unsigned int num_ports, + struct sdw_stream_runtime *stream); +int sdw_stream_remove_master(struct sdw_bus *bus, + struct sdw_stream_runtime *stream); +int sdw_stream_remove_slave(struct sdw_slave *slave, + struct sdw_stream_runtime *stream); +int sdw_prepare_stream(struct sdw_stream_runtime *stream); +int sdw_enable_stream(struct sdw_stream_runtime *stream); +int sdw_disable_stream(struct sdw_stream_runtime *stream); +int sdw_deprepare_stream(struct sdw_stream_runtime *stream); + /* messaging and data APIs */ int sdw_read(struct sdw_slave *slave, u32 addr); diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h index 4b37528..2b9573b 100644 --- a/include/linux/soundwire/sdw_intel.h +++ b/include/linux/soundwire/sdw_intel.h @@ -5,17 +5,31 @@ #define __SDW_INTEL_H /** + * struct sdw_intel_ops: Intel audio driver callback ops + * + * @config_stream: configure the stream with the hw_params + */ +struct sdw_intel_ops { + int (*config_stream)(void *arg, void *substream, + void *dai, void *hw_params, int stream_num); +}; + +/** * struct sdw_intel_res - Soundwire Intel resource structure * @mmio_base: mmio base of SoundWire registers * @irq: interrupt number * @handle: ACPI parent handle * @parent: parent device + * @ops: callback ops + * @arg: callback arg */ struct sdw_intel_res { void __iomem *mmio_base; int irq; acpi_handle handle; struct device *parent; + const struct sdw_intel_ops *ops; + void *arg; }; void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res); diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 8ad1166..3ddb575 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -170,6 +170,8 @@ struct snd_soc_dai_ops { unsigned int rx_num, unsigned int *rx_slot); int (*set_tristate)(struct snd_soc_dai *dai, int tristate); + int (*set_sdw_stream)(struct snd_soc_dai *dai, + void *stream, int direction); /* * DAI digital mute - optional. * Called by soc-core to minimise any pops. @@ -358,4 +360,25 @@ static inline void *snd_soc_dai_get_drvdata(struct snd_soc_dai *dai) return dev_get_drvdata(dai->dev); } +/** + * snd_soc_dai_set_sdw_stream() - Configures a DAI for SDW stream operation + * @dai: DAI + * @stream: STREAM + * @direction: Stream direction(Playback/Capture) + * SoundWire subsystem doesn't have a notion of direction and we reuse + * the ASoC stream direction to configure sink/source ports. + * Playback maps to source ports and Capture for sink ports. + * + * This should be invoked with NULL to clear the stream set previously. + * Returns 0 on success, a negative error code otherwise. + */ +static inline int snd_soc_dai_set_sdw_stream(struct snd_soc_dai *dai, + void *stream, int direction) +{ + if (dai->driver->ops->set_sdw_stream) + return dai->driver->ops->set_sdw_stream(dai, stream, direction); + else + return -ENOTSUPP; +} + #endif |
