diff options
Diffstat (limited to 'include')
437 files changed, 8523 insertions, 6958 deletions
diff --git a/include/asm-alpha/topology.h b/include/asm-alpha/topology.h index 420ccde..149532e 100644 --- a/include/asm-alpha/topology.h +++ b/include/asm-alpha/topology.h @@ -41,8 +41,7 @@ static inline cpumask_t node_to_cpumask(int node) #define pcibus_to_cpumask(bus) (cpu_online_map) -#else /* CONFIG_NUMA */ -# include <asm-generic/topology.h> #endif /* !CONFIG_NUMA */ +# include <asm-generic/topology.h> #endif /* _ASM_ALPHA_TOPOLOGY_H */ diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h index ff93df5..1e5a8ca 100644 --- a/include/asm-arm/arch-at91/at91_ecc.h +++ b/include/asm-arm/arch-at91/at91_ecc.h @@ -13,26 +13,26 @@ #ifndef AT91_ECC_H #define AT91_ECC_H -#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ +#define AT91_ECC_CR 0x00 /* Control register */ #define AT91_ECC_RST (1 << 0) /* Reset parity */ -#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ +#define AT91_ECC_MR 0x04 /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ #define AT91_ECC_PAGESIZE_528 (0) #define AT91_ECC_PAGESIZE_1056 (1) #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR 0x08 /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR 0x0c /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR 0x10 /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 52cd8e5..c2b13c2 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -76,10 +76,17 @@ #define AT91_PMC_PRES_32 (5 << 2) #define AT91_PMC_PRES_64 (6 << 2) #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91_PMC_MDIV_1 (0 << 8) -#define AT91_PMC_MDIV_2 (1 << 8) -#define AT91_PMC_MDIV_3 (2 << 8) -#define AT91_PMC_MDIV_4 (3 << 8) +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h index 01b433d..581fa41 100644 --- a/include/asm-arm/arch-at91/at91_shdwc.h +++ b/include/asm-arm/arch-at91/at91_shdwc.h @@ -24,10 +24,12 @@ #define AT91_SHDW_WKMODE0_LOW 2 #define AT91_SHDW_WKMODE0_ANYLEVEL 3 #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ +#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ #endif diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h new file mode 100644 index 0000000..efdb23a --- /dev/null +++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h @@ -0,0 +1,100 @@ +/* + * include/asm-arm/arch-at91/at91cap9_ddrsdr.h + * + * DDR/SDR Controller (DDRSDRC) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_DDRSDR_H +#define AT91CAP9_DDRSDR_H + +#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ + +#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_DDR 2 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 + +#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ + + +#endif diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h index d82631c..d3b8b3d 100644 --- a/include/asm-arm/arch-at91/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -1,7 +1,7 @@ /* - * include/asm-arm/arch-at91/at91sam926x_mc.h + * include/asm-arm/arch-at91/at91sam9_sdramc.h * - * Memory Controllers (SMC, SDRAMC) - System peripherals registers. + * SDRAM Controllers (SDRAMC) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. * * This program is free software; you can redistribute it and/or modify @@ -10,8 +10,8 @@ * (at your option) any later version. */ -#ifndef AT91SAM926x_MC_H -#define AT91SAM926x_MC_H +#ifndef AT91SAM9_SDRAMC_H +#define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ #define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ @@ -62,7 +62,7 @@ #define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 #define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ #define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ #define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ #define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) @@ -80,62 +80,4 @@ #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - #endif diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h new file mode 100644 index 0000000..9e49eed --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9_smc.h @@ -0,0 +1,73 @@ +/* + * include/asm-arm/arch-at91/at91sam9_smc.h + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SMC_H +#define AT91SAM9_SMC_H + +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index 9b1864b..186e7c7 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -101,30 +101,17 @@ /* new generic GPIO API - see Documentation/gpio.txt */ -static inline int gpio_request(unsigned gpio, const char *label) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - return 0; -} +#include <asm-generic/gpio.h> -static inline void gpio_free(unsigned gpio) -{ -} - -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); - -#include <asm-generic/gpio.h> /* cansleep wrappers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep /* * Map GPIO A0..A7 (0..7) to irq 64..71, * B0..B7 (7..15) to irq 72..79, and * F0..F7 (16..24) to irq 80..87. */ - static inline int gpio_to_irq(unsigned gpio) { if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h index b0364dc..7ad2c65 100644 --- a/include/asm-arm/arch-ks8695/devices.h +++ b/include/asm-arm/arch-ks8695/devices.h @@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan(void); extern void __init ks8695_add_device_lan(void); extern void __init ks8695_add_device_hpna(void); + /* LEDs */ +extern short ks8695_leds_cpu; +extern short ks8695_leds_timer; +extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); + /* PCI */ #define KS8695_MODE_PCI 0 #define KS8695_MODE_MINIPCI 1 diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h index be29b83..8590127 100644 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -11,107 +11,77 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -/*! - * @name PBC Controller parameters - */ -/*! @{ */ -/*! - * Base address of PBC controller - */ +/* Base address of PBC controller */ #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) /* Offsets for the PBC Controller register */ -/*! - * PBC Board status register offset - */ + +/* PBC Board status register offset */ #define PBC_BSTAT 0x000002 -/*! - * PBC Board control register 1 set address. - */ + +/* PBC Board control register 1 set address */ #define PBC_BCTRL1_SET 0x000004 -/*! - * PBC Board control register 1 clear address. - */ + +/* PBC Board control register 1 clear address */ #define PBC_BCTRL1_CLEAR 0x000006 -/*! - * PBC Board control register 2 set address. - */ + +/* PBC Board control register 2 set address */ #define PBC_BCTRL2_SET 0x000008 -/*! - * PBC Board control register 2 clear address. - */ + +/* PBC Board control register 2 clear address */ #define PBC_BCTRL2_CLEAR 0x00000A -/*! - * PBC Board control register 3 set address. - */ + +/* PBC Board control register 3 set address */ #define PBC_BCTRL3_SET 0x00000C -/*! - * PBC Board control register 3 clear address. - */ + +/* PBC Board control register 3 clear address */ #define PBC_BCTRL3_CLEAR 0x00000E -/*! - * PBC Board control register 4 set address. - */ + +/* PBC Board control register 4 set address */ #define PBC_BCTRL4_SET 0x000010 -/*! - * PBC Board control register 4 clear address. - */ + +/* PBC Board control register 4 clear address */ #define PBC_BCTRL4_CLEAR 0x000012 -/*! - * PBC Board status register 1. - */ + +/* PBC Board status register 1 */ #define PBC_BSTAT1 0x000014 -/*! - * PBC Board interrupt status register. - */ + +/* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 -/*! - * PBC Board interrupt current status register. - */ + +/* PBC Board interrupt current status register */ #define PBC_INTCURR_STATUS 0x000018 -/*! - * PBC Interrupt mask register set address. - */ + +/* PBC Interrupt mask register set address */ #define PBC_INTMASK_SET 0x00001A -/*! - * PBC Interrupt mask register clear address. - */ + +/* PBC Interrupt mask register clear address */ #define PBC_INTMASK_CLEAR 0x00001C -/*! - * External UART A. - */ +/* External UART A */ #define PBC_SC16C652_UARTA 0x010000 -/*! - * External UART B. - */ + +/* External UART B */ #define PBC_SC16C652_UARTB 0x010010 -/*! - * Ethernet Controller IO base address. - */ + +/* Ethernet Controller IO base address */ #define PBC_CS8900A_IOBASE 0x020000 -/*! - * Ethernet Controller Memory base address. - */ + +/* Ethernet Controller Memory base address */ #define PBC_CS8900A_MEMBASE 0x021000 -/*! - * Ethernet Controller DMA base address. - */ + +/* Ethernet Controller DMA base address */ #define PBC_CS8900A_DMABASE 0x022000 -/*! - * External chip select 0. - */ + +/* External chip select 0 */ #define PBC_XCS0 0x040000 -/*! - * LCD Display enable. - */ + +/* LCD Display enable */ #define PBC_LCD_EN_B 0x060000 -/*! - * Code test debug enable. - */ + +/* Code test debug enable */ #define PBC_CODE_B 0x070000 -/*! - * PSRAM memory select. - */ + +/* PSRAM memory select */ #define PBC_PSRAM_B 0x5000000 #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) @@ -139,4 +109,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h index 65e639d..c822d56 100644 --- a/include/asm-arm/arch-mxc/dma.h +++ b/include/asm-arm/arch-mxc/dma.h @@ -11,11 +11,4 @@ #ifndef __ASM_ARCH_MXC_DMA_H__ #define __ASM_ARCH_MXC_DMA_H__ -/*! - * @file dma.h - * @brief This file contains Unified DMA API for all MXC platforms. - * The API is platform independent. - * - * @ingroup SDMA - */ #endif diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index 3c09b92..e87ff06 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -8,45 +8,24 @@ * published by the Free Software Foundation. */ -/*! - * @file hardware.h - * @brief This file contains the hardware definitions of the board. - * - * @ingroup System - */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ #include <asm/sizes.h> -#include <asm/arch/mx31.h> +#ifdef CONFIG_ARCH_MX3 +# include <asm/arch/mx31.h> +#endif #include <asm/arch/mxc.h> -#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) - /* * --------------------------------------------------------------------------- * Board specific defines * --------------------------------------------------------------------------- */ -#define MXC_EXP_IO_BASE (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES) - -#include <asm/arch/board-mx31ads.h> - -#ifndef MXC_MAX_EXP_IO_LINES -#define MXC_MAX_EXP_IO_LINES 0 +#ifdef CONFIG_MACH_MX31ADS +# include <asm/arch/board-mx31ads.h> #endif -#define MXC_MAX_VIRTUAL_INTS 16 -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_INTS (MXC_MAX_INT_LINES + \ - MXC_MAX_GPIO_LINES + \ - MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h index cf6c83a..65b6810 100644 --- a/include/asm-arm/arch-mxc/io.h +++ b/include/asm-arm/arch-mxc/io.h @@ -8,24 +8,13 @@ * published by the Free Software Foundation. */ -/*! - * @file io.h - * @brief This file contains some memory mapping macros. - * @note There is no real ISA or PCI buses. But have to define these macros - * for some drivers to compile. - * - * @ingroup System - */ - #ifndef __ASM_ARCH_MXC_IO_H__ #define __ASM_ARCH_MXC_IO_H__ -/*! Allow IO space to be anywhere in the memory */ +/* Allow IO space to be anywhere in the memory */ #define IO_SPACE_LIMIT 0xffffffff -/*! - * io address mapping macro - */ +/* io address mapping macro */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index e4686c6..b2c5205 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -13,26 +13,17 @@ #include <asm/hardware.h> -/*! - * @file irqs.h - * @brief This file defines the number of normal interrupts and fast interrupts - * - * @ingroup Interrupt - */ - #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) #define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) -/*! - * Number of normal interrupts - */ -#define NR_IRQS MXC_MAX_INTS +/* Number of normal interrupts */ +#define NR_IRQS (MXC_MAX_INT_LINES + \ + MXC_MAX_GPIO_LINES + \ + MXC_MAX_VIRTUAL_INTS) -/*! - * Number of fast interrupts - */ +/* Number of fast interrupts */ #define NR_FIQS MXC_MAX_INTS -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ +#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h index c89aac8..059f830 100644 --- a/include/asm-arm/arch-mxc/memory.h +++ b/include/asm-arm/arch-mxc/memory.h @@ -13,24 +13,17 @@ #include <asm/hardware.h> -/*! - * @file memory.h - * @brief This file contains macros needed by the Linux kernel and drivers. - * - * @ingroup Memory - */ - -/*! +/* * Virtual view <-> DMA view memory address translations * This macro is used to translate the virtual address to an address * suitable to be passed to set_dma_addr() */ #define __virt_to_bus(a) __virt_to_phys(a) -/*! +/* * Used to convert an address for DMA operations to an address that the * kernel can use. */ #define __bus_to_virt(a) __phys_to_virt(a) -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ +#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 85c49c9..36a1af4 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -317,6 +317,8 @@ #define MXC_MAX_INT_LINES 64 #define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES +#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) +#define MXC_MAX_VIRTUAL_INTS 16 /*! * Number of GPIO port as defined in the IC Spec @@ -329,7 +331,33 @@ #define PROD_SIGNATURE 0x1 /* For MX31 */ +/* silicon revisions specific to i.MX31 */ +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_3 0x13 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 +#define CHIP_REV_2_2 0x22 +#define CHIP_REV_2_3 0x23 +#define CHIP_REV_3_0 0x30 +#define CHIP_REV_3_1 0x31 +#define CHIP_REV_3_2 0x32 + #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +/* this is a i.MX31 CPU */ +#define cpu_is_mx31() (1) + +extern unsigned int system_rev; + +static inline int mx31_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 0837f1f..146d3f6 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -15,6 +15,11 @@ #error "Do not include directly." #endif +/* clean up all things that are not used */ +#ifndef CONFIG_ARCH_MX3 +# define cpu_is_mx31() (0) +#endif + /* ***************************************** * GPT Register definitions * @@ -31,9 +36,7 @@ #define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) #define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) -/*! - * GPT Control register bit definitions - */ +/* GPT Control register bit definitions */ #define GPTCR_FO3 (1 << 31) #define GPTCR_FO2 (1 << 30) #define GPTCR_FO1 (1 << 29) @@ -146,4 +149,4 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#endif /* __ASM_ARCH_MXC_H__ */ +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h index 109956b..bbfc374 100644 --- a/include/asm-arm/arch-mxc/system.h +++ b/include/asm-arm/arch-mxc/system.h @@ -21,30 +21,14 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -/*! - * @file system.h - * @brief This file contains idle and reset functions. - * - * @ingroup System - */ - -/*! - * This function puts the CPU into idle mode. It is called by default_idle() - * in process.c file. - */ static inline void arch_idle(void) { cpu_do_idle(); } -/* - * This function resets the system. It is called by machine_restart(). - * - * @param mode indicates different kinds of resets - */ static inline void arch_reset(char mode) { cpu_reset(0); } -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ +#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h index 83a73da..62d9762 100644 --- a/include/asm-arm/arch-mxc/vmalloc.h +++ b/include/asm-arm/arch-mxc/vmalloc.h @@ -20,17 +20,7 @@ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ #define __ASM_ARCH_MXC_VMALLOC_H__ -/*! - * @file vmalloc.h - * - * @brief This file contains platform specific macros for vmalloc. - * - * @ingroup System - */ - -/*! - * vmalloc ending address - */ +/* vmalloc ending address */ #define VMALLOC_END 0xF4000000 -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ +#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h index 716f34f..e57443b 100644 --- a/include/asm-arm/arch-ns9xxx/board.h +++ b/include/asm-arm/arch-ns9xxx/board.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/board.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,8 +13,30 @@ #include <asm/mach-types.h> -#define board_is_a9m9750dev() (machine_is_cc9p9360dev()) +#define board_is_a9m9750dev() (0 \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9750dev() \ + ) -#define board_is_jscc9p9360() (machine_is_cc9p9360js()) +#define board_is_a9mvali() (0 \ + || machine_is_cc9p9360val() \ + || machine_is_cc9p9750val() \ + ) + +#define board_is_jscc9p9210() (0 \ + || machine_is_cc9p9210js() \ + ) + +#define board_is_jscc9p9215() (0 \ + || machine_is_cc9p9215js() \ + ) + +#define board_is_jscc9p9360() (0 \ + || machine_is_cc9p9360js() \ + ) + +#define board_is_uncbas() (0 \ + || machine_is_cc7ucamry() \ + ) #endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h deleted file mode 100644 index b943d3a..0000000 --- a/include/asm-arm/arch-ns9xxx/clock.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/clock.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -#include <asm/arch-ns9xxx/regs-sys.h> - -#define CRYSTAL 29491200 /* Hz */ - -/* The HRM calls this value f_vco */ -static inline u32 ns9xxx_systemclock(void) __attribute__((const)); -static inline u32 ns9xxx_systemclock(void) -{ - u32 pll = __raw_readl(SYS_PLL); - - /* - * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in - * time.c). - * - * The following values are given: - * - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6} - * - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2 - * - ND in {0 .. 31} - * - FS in {0 .. 3} - * - * Assuming the worst, we consider: - * - TIMERCLOCKSELECT == 64 - * - ND == 0 - * - FS == 3 - * - * So HZ should be a divisor of: - * (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT - * == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64 - * == 2^8 * 3^2 * 5^2 - * == 57600 - * - * Currently HZ is defined to be 100 for this platform. - * - * Fine. - */ - return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) - >> REGGETIM(pll, SYS_PLL, FS); -} - -static inline u32 ns9xxx_cpuclock(void) __attribute__((const)); -static inline u32 ns9xxx_cpuclock(void) -{ - return ns9xxx_systemclock() / 2; -} - -static inline u32 ns9xxx_ahbclock(void) __attribute__((const)); -static inline u32 ns9xxx_ahbclock(void) -{ - return ns9xxx_systemclock() / 4; -} - -static inline u32 ns9xxx_bbusclock(void) __attribute__((const)); -static inline u32 ns9xxx_bbusclock(void) -{ - return ns9xxx_systemclock() / 8; -} - -#endif /* ifndef __ASM_ARCH_CLOCK_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 86aec87..89a21c5 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/entry-macro.S * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -9,16 +9,16 @@ * the Free Software Foundation. */ #include <asm/hardware.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-sys-common.h> .macro get_irqnr_preamble, base, tmp + ldr \base, =SYS_ISRADDR .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =SYS_ISRADDR ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] cmp \irqstat, #0 ldrne \irqnr, [\base] diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h index 25d8d28..e83d48e 100644 --- a/include/asm-arm/arch-ns9xxx/irqs.h +++ b/include/asm-arm/arch-ns9xxx/irqs.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/irqs.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,38 +11,39 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#define IRQ_WATCHDOG 0 -#define IRQ_AHBBUSERR 1 -#define IRQ_BBUSAGG 2 +/* NetSilicon 9360 */ +#define IRQ_NS9XXX_WATCHDOG 0 +#define IRQ_NS9XXX_AHBBUSERR 1 +#define IRQ_NS9360_BBUSAGG 2 /* irq 3 is reserved for NS9360 */ -#define IRQ_ETHRX 4 -#define IRQ_ETHTX 5 -#define IRQ_ETHPHY 6 -#define IRQ_LCD 7 -#define IRQ_SERBRX 8 -#define IRQ_SERBTX 9 -#define IRQ_SERARX 10 -#define IRQ_SERATX 11 -#define IRQ_SERCRX 12 -#define IRQ_SERCTX 13 -#define IRQ_I2C 14 -#define IRQ_BBUSDMA 15 -#define IRQ_TIMER0 16 -#define IRQ_TIMER1 17 -#define IRQ_TIMER2 18 -#define IRQ_TIMER3 19 -#define IRQ_TIMER4 20 -#define IRQ_TIMER5 21 -#define IRQ_TIMER6 22 -#define IRQ_TIMER7 23 -#define IRQ_RTC 24 -#define IRQ_USBHOST 25 -#define IRQ_USBDEVICE 26 -#define IRQ_IEEE1284 27 -#define IRQ_EXT0 28 -#define IRQ_EXT1 29 -#define IRQ_EXT2 30 -#define IRQ_EXT3 31 +#define IRQ_NS9XXX_ETHRX 4 +#define IRQ_NS9XXX_ETHTX 5 +#define IRQ_NS9XXX_ETHPHY 6 +#define IRQ_NS9360_LCD 7 +#define IRQ_NS9360_SERBRX 8 +#define IRQ_NS9360_SERBTX 9 +#define IRQ_NS9360_SERARX 10 +#define IRQ_NS9360_SERATX 11 +#define IRQ_NS9360_SERCRX 12 +#define IRQ_NS9360_SERCTX 13 +#define IRQ_NS9360_I2C 14 +#define IRQ_NS9360_BBUSDMA 15 +#define IRQ_NS9360_TIMER0 16 +#define IRQ_NS9360_TIMER1 17 +#define IRQ_NS9360_TIMER2 18 +#define IRQ_NS9360_TIMER3 19 +#define IRQ_NS9360_TIMER4 20 +#define IRQ_NS9360_TIMER5 21 +#define IRQ_NS9360_TIMER6 22 +#define IRQ_NS9360_TIMER7 23 +#define IRQ_NS9360_RTC 24 +#define IRQ_NS9360_USBHOST 25 +#define IRQ_NS9360_USBDEVICE 26 +#define IRQ_NS9360_IEEE1284 27 +#define IRQ_NS9XXX_EXT0 28 +#define IRQ_NS9XXX_EXT1 29 +#define IRQ_NS9XXX_EXT2 30 +#define IRQ_NS9XXX_EXT3 31 #define BBUS_IRQ(irq) (32 + irq) @@ -67,7 +68,7 @@ /* * these Interrupts are specific for the a9m9750dev board. * They are generated by an FPGA that interrupts the CPU on - * IRQ_EXT2 + * IRQ_NS9360_EXT2 */ #define FPGA_IRQ(irq) (64 + irq) diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h new file mode 100644 index 0000000..ac08a31 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/module.h @@ -0,0 +1,60 @@ +/* + * include/asm-arm/arch-ns9xxx/module.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_MODULE_H +#define __ASM_ARCH_MODULE_H + +#include <asm/mach-types.h> + +#define module_is_cc7ucamry() (0 \ + || machine_is_cc7ucamry() \ + ) + +#define module_is_cc9c() (0 \ + || machine_is_cc9c() \ + ) + +#define module_is_cc9p9210() (0 \ + || machine_is_cc9p9210() \ + || machine_is_cc9p9210js() \ + ) + +#define module_is_cc9p9215() (0 \ + || machine_is_cc9p9215() \ + || machine_is_cc9p9215js() \ + ) + +#define module_is_cc9p9360() (0 \ + || machine_is_a9m9360() \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9360js() \ + || machine_is_cc9p9360val() \ + ) + +#define module_is_cc9p9750() (0 \ + || machine_is_a9m9750() \ + || machine_is_cc9p9750dev() \ + || machine_is_cc9p9750js() \ + || machine_is_cc9p9750val() \ + ) + +#define module_is_ccw9c() (0 \ + || machine_is_ccw9c() \ + ) + +#define module_is_inc20otter() (0 \ + || machine_is_inc20otter() \ + ) + +#define module_is_otter() (0 \ + || machine_is_otter() \ + ) + +#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h new file mode 100644 index 0000000..f3aa6c5 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/processor-ns9360.h @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-ns9xxx/processor-ns9360.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PROCESSORNS9360_H +#define __ASM_ARCH_PROCESSORNS9360_H + +#include <linux/init.h> + +void ns9360_reset(char mode); + +unsigned long ns9360_systemclock(void) __attribute__((const)); + +static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); +static inline unsigned long ns9360_cpuclock(void) +{ + return ns9360_systemclock() / 2; +} + +void __init ns9360_map_io(void); + +extern struct sys_timer ns9360_timer; + +int ns9360_gpio_configure(unsigned gpio, int inv, int func); + +#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index 223e51b..f7b53b6 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/processor.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,9 +11,32 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include <asm/mach-types.h> +#include <asm/arch-ns9xxx/module.h> -#define processor_is_ns9360() (machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js()) +#define processor_is_ns9210() (0 \ + || module_is_cc7ucamry() \ + || module_is_cc9p9210() \ + || module_is_inc20otter() \ + || module_is_otter() \ + ) + +#define processor_is_ns9215() (0 \ + || module_is_cc9p9215() \ + ) + +#define processor_is_ns9360() (0 \ + || module_is_cc9p9360() \ + || module_is_cc9c() \ + || module_is_ccw9c() \ + ) + +#define processor_is_ns9750() (0 \ + || module_is_cc9p9750() \ + ) + +#define processor_is_ns921x() (0 \ + || processor_is_ns9210() \ + || processor_is_ns9215() \ + ) #endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h new file mode 100644 index 0000000..956c57c --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-sys-common.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-sys-common.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_REGSSYSCOMMON_H +#define __ASM_ARCH_REGSSYSCOMMON_H +#include <asm/hardware.h> + +/* Interrupt Vector Address Register Level x */ +#define SYS_IVA(x) __REG2(0xa09000c4, (x)) + +/* Interrupt Configuration registers */ +#define SYS_IC(x) __REG2(0xa0900144, (x)) + +/* ISRADDR */ +#define SYS_ISRADDR __REG(0xa0900164) + +/* Interrupt Status Active */ +#define SYS_ISA __REG(0xa0900168) + +/* Interrupt Status Raw */ +#define SYS_ISR __REG(0xa090016c) + +#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h index 749262f..318b694 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h @@ -1,15 +1,15 @@ /* - * include/asm-arm/arch-ns9xxx/regs-sys.h + * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#ifndef __ASM_ARCH_REGSSYS_H -#define __ASM_ARCH_REGSSYS_H +#ifndef __ASM_ARCH_REGSSYSNS9360_H +#define __ASM_ARCH_REGSSYSNS9360_H #include <asm/hardware.h> @@ -27,21 +27,6 @@ /* Timer x Read register */ #define SYS_TR(x) __REG2(0xa0900084, (x)) -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - /* Timer Interrupt Status register */ #define SYS_TIS __REG(0xa0900170) @@ -160,4 +145,4 @@ #define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) #define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) -#endif /* ifndef __ASM_ARCH_REGSSYS_H */ +#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index c1082bd..1348073 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/system.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include <asm/proc-fns.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> static inline void arch_idle(void) { @@ -22,11 +22,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - u32 reg; - - reg = __raw_readl(SYS_PLL) >> 16; - REGSET(reg, SYS_PLL, SWC, YES); - __raw_writel(reg, SYS_PLL); +#ifdef CONFIG_PROCESSOR_NS9360 + if (processor_is_ns9360()) + ns9360_reset(mode); + else +#endif + BUG(); BUG(); } diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h index 961ca7d..71066ba 100644 --- a/include/asm-arm/arch-ns9xxx/uncompress.h +++ b/include/asm-arm/arch-ns9xxx/uncompress.h @@ -11,20 +11,149 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -static void putc(char c) +#include <asm/io.h> + +#define __REG(x) ((void __iomem __force *)(x)) + +static void putc_dummy(char c, void __iomem *base) { - volatile u8 *base = (volatile u8 *)0x40000000; - int t = 0x10000; + /* nothing */ +} +static void putc_ns9360(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readl(base + 8) & (1 << 3)) { + __raw_writeb(c, base + 16); + t = 0x10000; + break; + } + } while (t); +} + +static void putc_a9m9750dev(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readb(base + 5) & (1 << 5)) { + __raw_writeb(c, base); + t = 0x10000; + break; + } + } while (t); + +} + +static void putc_ns921x(char c, void __iomem *base) +{ + static int t = 0x10000; do { - if (base[5] & 0x20) { - base[0] = c; + if (t) + --t; + + if (!(__raw_readl(base) & (1 << 11))) { + __raw_writeb(c, base + 0x0028); + t = 0x10000; break; } - } while (--t); + } while (t); } -#define arch_decomp_setup() +#define MSCS __REG(0xA0900184) + +#define NS9360_UARTA __REG(0x90200040) +#define NS9360_UARTB __REG(0x90200000) +#define NS9360_UARTC __REG(0x90300000) +#define NS9360_UARTD __REG(0x90300040) + +#define NS9360_UART_ENABLED(base) \ + (__raw_readl(NS9360_UARTA) & (1 << 31)) + +#define A9M9750DEV_UARTA __REG(0x40000000) + +#define NS921XSYS_CLOCK __REG(0xa090017c) +#define NS921X_UARTA __REG(0x90010000) +#define NS921X_UARTB __REG(0x90018000) +#define NS921X_UARTC __REG(0x90020000) +#define NS921X_UARTD __REG(0x90028000) + +#define NS921X_UART_ENABLED(base) \ + (__raw_readl((base) + 0x1000) & (1 << 29)) + +static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) +{ + if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { + /* ns9360 or ns9750 */ + if (NS9360_UART_ENABLED(NS9360_UARTA)) { + *putc = putc_ns9360; + *base = NS9360_UARTA; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { + *putc = putc_ns9360; + *base = NS9360_UARTB; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { + *putc = putc_ns9360; + *base = NS9360_UARTC; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { + *putc = putc_ns9360; + *base = NS9360_UARTD; + return; + } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { + *putc = putc_a9m9750dev; + *base = A9M9750DEV_UARTA; + return; + } + } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { + /* ns921x */ + u32 clock = __raw_readl(NS921XSYS_CLOCK); + + if ((clock & (1 << 1)) && + NS921X_UART_ENABLED(NS921X_UARTA)) { + *putc = putc_ns921x; + *base = NS921X_UARTA; + return; + } else if ((clock & (1 << 2)) && + NS921X_UART_ENABLED(NS921X_UARTB)) { + *putc = putc_ns921x; + *base = NS921X_UARTB; + return; + } else if ((clock & (1 << 3)) && + NS921X_UART_ENABLED(NS921X_UARTC)) { + *putc = putc_ns921x; + *base = NS921X_UARTC; + return; + } else if ((clock & (1 << 4)) && + NS921X_UART_ENABLED(NS921X_UARTD)) { + *putc = putc_ns921x; + *base = NS921X_UARTD; + return; + } + } + + *putc = putc_dummy; +} + +void (*myputc)(char, void __iomem *); +void __iomem *base; + +static void putc(char c) +{ + myputc(c, base); +} + +static void arch_decomp_setup(void) +{ + autodetect(&myputc, &base); +} #define arch_decomp_wdog() static void flush(void) diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h index 2b1a8a4..9492609 100644 --- a/include/asm-arm/arch-omap/board-osk.h +++ b/include/asm-arm/arch-omap/board-osk.h @@ -32,5 +32,16 @@ /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 +/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with + * alternate pin configurations for hardware-controlled blinking. + */ +#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) +# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) +# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) +# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) +# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) +# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) + #endif /* __ASM_ARCH_OMAP_OSK_H */ diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index fa68810..57523bd 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -14,6 +14,35 @@ #define __ARCH_ARM_OMAP_CLOCK_H struct module; +struct clk; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + +struct clksel_rate { + u8 div; + u32 val; + u8 flags; +}; + +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; +# if defined(CONFIG_ARCH_OMAP3) + void __iomem *control_reg; + u32 enable_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; +# endif +}; + +#endif struct clk { struct list_head node; @@ -25,8 +54,6 @@ struct clk { __u32 flags; void __iomem *enable_reg; __u8 enable_bit; - __u8 rate_offset; - __u8 src_offset; __s8 usecount; void (*recalc)(struct clk *); int (*set_rate)(struct clk *, unsigned long); @@ -34,6 +61,16 @@ struct clk { void (*init)(struct clk *); int (*enable)(struct clk *); void (*disable)(struct clk *); +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + u8 fixed_div; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + const struct dpll_data *dpll_data; +#else + __u8 rate_offset; + __u8 src_offset; +#endif }; struct clk_functions { @@ -54,10 +91,12 @@ extern int clk_init(struct clk_functions * custom_clocks); extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); extern void followparent_recalc(struct clk * clk); extern void clk_allow_idle(struct clk *clk); extern void clk_deny_idle(struct clk *clk); extern int clk_get_usecount(struct clk *clk); +extern void clk_enable_init_clocks(void); /* Clock flags */ #define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ @@ -71,21 +110,33 @@ extern int clk_get_usecount(struct clk *clk); #define CLOCK_NO_IDLE_PARENT (1 << 8) #define DELAYED_APP (1 << 9) /* Delay application of clock */ #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ -#define CM_MPU_SEL1 (1 << 11) /* Domain divider/source */ -#define CM_DSP_SEL1 (1 << 12) -#define CM_GFX_SEL1 (1 << 13) -#define CM_MODEM_SEL1 (1 << 14) -#define CM_CORE_SEL1 (1 << 15) /* Sets divider for many */ -#define CM_CORE_SEL2 (1 << 16) /* sets parent for GPT */ -#define CM_WKUP_SEL1 (1 << 17) -#define CM_PLL_SEL1 (1 << 18) -#define CM_PLL_SEL2 (1 << 19) -#define CM_SYSCLKOUT_SEL1 (1 << 20) +#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +/* bits 13-20 are currently free */ #define CLOCK_IN_OMAP310 (1 << 21) #define CLOCK_IN_OMAP730 (1 << 22) #define CLOCK_IN_OMAP1510 (1 << 23) #define CLOCK_IN_OMAP16XX (1 << 24) #define CLOCK_IN_OMAP242X (1 << 25) #define CLOCK_IN_OMAP243X (1 << 26) +#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ +#define PARENT_CONTROLS_CLOCK (1 << 28) +#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ +#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ + +/* Clksel_rate flags */ +#define DEFAULT_RATE (1 << 0) +#define RATE_IN_242X (1 << 1) +#define RATE_IN_243X (1 << 2) +#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ +#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) + + +/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ +#define CORE_CLK_SRC_32K 0 +#define CORE_CLK_SRC_DPLL 1 +#define CORE_CLK_SRC_DPLL_X2 2 #endif diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h new file mode 100644 index 0000000..9944bb5 --- /dev/null +++ b/include/asm-arm/arch-omap/control.h @@ -0,0 +1,191 @@ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + +/* + * include/asm-arm/arch-omap/control.h + * + * OMAP2/3 System Control Module definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +#define OMAP242X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074 +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +extern void omap_ctrl_base_set(u32 base); +extern u32 omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +#else +#define omap_ctrl_base_set(x) WARN_ON(1) +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_CONTROL_H */ + diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index f6967c8..74cd572 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -68,7 +68,7 @@ .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =VA_IC_BASE + ldr \base, =OMAP2_VA_IC_BASE ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ cmp \irqnr, #0x0 bne 2222f diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 164da09..86621a0 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -82,62 +82,35 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old OMAP-specfic ones should - * eventually be removed (along with this errno.h inclusion), and maybe - * gpios should put MPUIOs last too. +/* Wrappers for "new style" GPIO calls, using the new infrastructure + * which lets us plug in FPGA, I2C, and other implementations. + * * + * The original OMAP-specfic calls should eventually be removed. */ -#include <asm/errno.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return omap_request_gpio(gpio); -} - -static inline void gpio_free(unsigned gpio) -{ - omap_free_gpio(gpio); -} - -static inline int __gpio_set_direction(unsigned gpio, int is_input) -{ - if (cpu_class_is_omap2()) { - if (gpio > OMAP_MAX_GPIO_LINES) - return -EINVAL; - } else { - if (gpio > (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)) - return -EINVAL; - } - omap_set_gpio_direction(gpio, is_input); - return 0; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return __gpio_set_direction(gpio, 1); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - omap_set_gpio_dataout(gpio, value); - return __gpio_set_direction(gpio, 0); -} +#include <linux/errno.h> +#include <asm-generic/gpio.h> static inline int gpio_get_value(unsigned gpio) { - return omap_get_gpio_datain(gpio); + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned gpio, int value) { - omap_set_gpio_dataout(gpio, value); + __gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} static inline int gpio_to_irq(unsigned gpio) { - return OMAP_GPIO_IRQ(gpio); + if (gpio < (OMAP_MAX_GPIO_LINES + 16)) + return OMAP_GPIO_IRQ(gpio); + return -EINVAL; } static inline int irq_to_gpio(unsigned irq) diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 289082d..160578e 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -80,6 +80,13 @@ #define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ #define OMAP243X_GPMC_VIRT 0xFE000000 #define OMAP243X_GPMC_SIZE SZ_1M +#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE +#define OMAP243X_SDRC_VIRT 0xFD000000 +#define OMAP243X_SDRC_SIZE SZ_1M +#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE +#define OMAP243X_SMS_VIRT 0xFC000000 +#define OMAP243X_SMS_SIZE SZ_1M + #endif #define IO_OFFSET 0x90000000 @@ -88,16 +95,73 @@ #define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ /* DSP */ -#define DSP_MEM_24XX_PHYS OMAP24XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ #define DSP_MEM_24XX_VIRT 0xe0000000 #define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP24XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ #define DSP_IPI_24XX_VIRT 0xe1000000 #define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP24XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ #define DSP_MMU_24XX_VIRT 0xe2000000 #define DSP_MMU_24XX_SIZE SZ_4K +#elif defined(CONFIG_ARCH_OMAP3) + +/* We map both L3 and L4 on OMAP3 */ +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ +#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ + +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ +#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* + * Need to look at the Size 4M for L4. + * VPOM3430 was not working for Int controller + */ + +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ +#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_SIZE SZ_1M + +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ +#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_SIZE SZ_1M + +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ +#define L4_EMU_34XX_VIRT 0xe4000000 +#define L4_EMU_34XX_SIZE SZ_64M + +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ +#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_SIZE SZ_1M + +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ +#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_SIZE SZ_1M + +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ +#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_SIZE SZ_1M + + +#define IO_OFFSET 0x90000000 +#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ + +/* DSP */ +#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_34XX_VIRT 0xe0000000 +#define DSP_MEM_34XX_SIZE 0x28000 +#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_34XX_VIRT 0xe1000000 +#define DSP_IPI_34XX_SIZE SZ_4K +#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_34XX_VIRT 0xe2000000 +#define DSP_MMU_34XX_SIZE SZ_4K + #endif #ifndef __ASSEMBLER__ diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h index b70e37b..c9588f4 100644 --- a/include/asm-arm/arch-omap/mmc.h +++ b/include/asm-arm/arch-omap/mmc.h @@ -18,6 +18,8 @@ #define OMAP_MMC_MAX_SLOTS 2 struct omap_mmc_platform_data { + struct omap_mmc_conf conf; + unsigned enabled:1; /* number of slots on board */ unsigned nr_slots:2; diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index b8fff50..ff9a5b5 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -4,9 +4,10 @@ * Table of the Omap register configurations for the FUNC_MUX and * PULL_DWN combinations. * - * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation * - * Written by Tony Lindgren <tony.lindgren@nokia.com> + * Written by Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,14 +28,6 @@ * - W8 = ball * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 * - MMC2_DAT0 = function - * - * Change log: - * Added entry for the I2C interface. (02Feb 2004) - * Copyright (C) 2004 Texas Instruments - * - * Added entry for the keypad and uwire CS1. (09Mar 2004) - * Copyright (C) 2004 Texas Instruments - * */ #ifndef __ASM_ARCH_MUX_H @@ -469,7 +462,12 @@ enum omap24xx_index { AA8_242X_GPIO58, Y20_24XX_GPIO60, W4__24XX_GPIO74, + N15_24XX_GPIO85, M15_24XX_GPIO92, + P20_24XX_GPIO93, + P18_24XX_GPIO95, + M18_24XX_GPIO96, + L14_24XX_GPIO97, J15_24XX_GPIO99, V14_24XX_GPIO117, P14_24XX_GPIO125, @@ -494,8 +492,6 @@ enum omap24xx_index { D3_242X_DMAREQ4, E3_242X_DMAREQ5, - P20_24XX_TSC_IRQ, - /* UART3 */ K15_24XX_UART3_TX, K14_24XX_UART3_RX, @@ -557,13 +553,57 @@ enum omap24xx_index { B3__24XX_KBR5, AA4_24XX_KBC2, B13_24XX_KBC6, + + /* 2430 USB */ + AD9_2430_USB0_PUEN, + Y11_2430_USB0_VP, + AD7_2430_USB0_VM, + AE7_2430_USB0_RCV, + AD4_2430_USB0_TXEN, + AF9_2430_USB0_SE0, + AE6_2430_USB0_DAT, + AD24_2430_USB1_SE0, + AB24_2430_USB1_RCV, + Y25_2430_USB1_TXEN, + AA26_2430_USB1_DAT, + + /* 2430 HS-USB */ + AD9_2430_USB0HS_DATA3, + Y11_2430_USB0HS_DATA4, + AD7_2430_USB0HS_DATA5, + AE7_2430_USB0HS_DATA6, + AD4_2430_USB0HS_DATA2, + AF9_2430_USB0HS_DATA0, + AE6_2430_USB0HS_DATA1, + AE8_2430_USB0HS_CLK, + AD8_2430_USB0HS_DIR, + AE5_2430_USB0HS_STP, + AE9_2430_USB0HS_NXT, + AC7_2430_USB0HS_DATA7, + + /* 2430 McBSP */ + AC10_2430_MCBSP2_FSX, + AD16_2430_MCBSP2_CLX, + AE13_2430_MCBSP2_DX, + AD13_2430_MCBSP2_DR, + AC10_2430_MCBSP2_FSX_OFF, + AD16_2430_MCBSP2_CLX_OFF, + AE13_2430_MCBSP2_DX_OFF, + AD13_2430_MCBSP2_DR_OFF, + +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); }; #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); extern int omap2_mux_init(void); -extern int omap_mux_register(struct pin_config * pins, unsigned long size); +extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h index 14c0f94..b9fcaae 100644 --- a/include/asm-arm/arch-omap/omap24xx.h +++ b/include/asm-arm/arch-omap/omap24xx.h @@ -1,3 +1,28 @@ +/* + * include/asm-arm/arch-omap/omap24xx.h + * + * This file contains the processor specific definitions + * of the TI OMAP24XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + #ifndef __ASM_ARCH_OMAP24XX_H #define __ASM_ARCH_OMAP24XX_H @@ -13,33 +38,70 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) #define OMAP24XX_IVA_INTC_BASE 0x40000000 #define IRQ_SIR_IRQ 0x0040 -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) -#endif +#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_PRM_BASE OMAP2420_CM_BASE +#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP2420_SMS_BASE 0x68008000 -#ifdef CONFIG_ARCH_OMAP2430 -#define OMAP24XX_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP24XX_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP24XX_SDRC_BASE (0x6D000000) -#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_PRM_BASE OMAP2430_CM_BASE + +#define OMAP243X_SMS_BASE 0x6C000000 +#define OMAP243X_SDRC_BASE 0x6D000000 #define OMAP243X_GPMC_BASE 0x6E000000 -#endif +#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) +#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE +#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) /* DSP SS */ -#define OMAP24XX_DSP_BASE 0x58000000 -#define OMAP24XX_DSP_MEM_BASE (OMAP24XX_DSP_BASE + 0x0) -#define OMAP24XX_DSP_IPI_BASE (OMAP24XX_DSP_BASE + 0x1000000) -#define OMAP24XX_DSP_MMU_BASE (OMAP24XX_DSP_BASE + 0x2000000) +#define OMAP2420_DSP_BASE 0x58000000 +#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) +#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) +#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) + +#define OMAP243X_DSP_BASE 0x5C000000 +#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) +#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) /* Mailbox */ #define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) +/* Camera */ +#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) + +/* Security */ +#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) +#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) +#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) +#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) +#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) +#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) + +#if defined(CONFIG_ARCH_OMAP2420) + +#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE +#define OMAP2_CM_BASE OMAP2420_CM_BASE +#define OMAP2_PRM_BASE OMAP2420_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#elif defined(CONFIG_ARCH_OMAP2430) + +#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE +#define OMAP2_CM_BASE OMAP2430_CM_BASE +#define OMAP2_PRM_BASE OMAP2430_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#endif + #endif /* __ASM_ARCH_OMAP24XX_H */ diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h new file mode 100644 index 0000000..673b396 --- /dev/null +++ b/include/asm-arm/arch-omap/sdrc.h @@ -0,0 +1,75 @@ +#ifndef ____ASM_ARCH_SDRC_H +#define ____ASM_ARCH_SDRC_H + +/* + * OMAP2/3 SDRC/SMS register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MR_0 0x084 +#define SDRC_RFR_CTRL_0 0x0a4 + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + + +#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + +#endif diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 99ae9ea..2147d18 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -132,14 +132,11 @@ # define CONF_USB_PWRDN_DP_R (1 << 1) /* OMAP2 */ -#define CONTROL_DEVCONF_REG __REG32(L4_24XX_BASE + 0x0274) # define USB_UNIDIR 0x0 # define USB_UNIDIR_TLL 0x1 # define USB_BIDIR 0x2 # define USB_BIDIR_TLL 0x3 -# define USBT0WRMODEI(x) ((x) << 22) -# define USBT1WRMODEI(x) ((x) << 20) -# define USBT2WRMODEI(x) ((x) << 18) +# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) # define USBT2TLL5PI (1 << 17) # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h deleted file mode 100644 index e0b8c39..0000000 --- a/include/asm-arm/arch-orion/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-orion/io.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include "orion.h" - -#define IO_SPACE_LIMIT 0xffffffff -#define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h deleted file mode 100644 index eea65ca..0000000 --- a/include/asm-arm/arch-orion/irqs.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-arm/arch-orion/irqs.h - * - * IRQ definitions for Orion SoC - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H__ -#define __ASM_ARCH_IRQS_H__ - -#include "orion.h" /* need GPIO_MAX */ - -/* - * Orion Main Interrupt Controller - */ -#define IRQ_ORION_BRIDGE 0 -#define IRQ_ORION_DOORBELL_H2C 1 -#define IRQ_ORION_DOORBELL_C2H 2 -#define IRQ_ORION_UART0 3 -#define IRQ_ORION_UART1 4 -#define IRQ_ORION_I2C 5 -#define IRQ_ORION_GPIO_0_7 6 -#define IRQ_ORION_GPIO_8_15 7 -#define IRQ_ORION_GPIO_16_23 8 -#define IRQ_ORION_GPIO_24_31 9 -#define IRQ_ORION_PCIE0_ERR 10 -#define IRQ_ORION_PCIE0_INT 11 -#define IRQ_ORION_USB1_CTRL 12 -#define IRQ_ORION_DEV_BUS_ERR 14 -#define IRQ_ORION_PCI_ERR 15 -#define IRQ_ORION_USB_BR_ERR 16 -#define IRQ_ORION_USB0_CTRL 17 -#define IRQ_ORION_ETH_RX 18 -#define IRQ_ORION_ETH_TX 19 -#define IRQ_ORION_ETH_MISC 20 -#define IRQ_ORION_ETH_SUM 21 -#define IRQ_ORION_ETH_ERR 22 -#define IRQ_ORION_IDMA_ERR 23 -#define IRQ_ORION_IDMA_0 24 -#define IRQ_ORION_IDMA_1 25 -#define IRQ_ORION_IDMA_2 26 -#define IRQ_ORION_IDMA_3 27 -#define IRQ_ORION_CESA 28 -#define IRQ_ORION_SATA 29 -#define IRQ_ORION_XOR0 30 -#define IRQ_ORION_XOR1 31 - -/* - * Orion General Purpose Pins - */ -#define IRQ_ORION_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS) - -#endif /* __ASM_ARCH_IRQS_H__ */ diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h deleted file mode 100644 index 673a418..0000000 --- a/include/asm-arm/arch-orion/orion.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * include/asm-arm/arch-orion/orion.h - * - * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_ORION_H__ -#define __ASM_ARCH_ORION_H__ - -/***************************************************************************** - * Orion Address Map - * - * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-NAS only) - ****************************************************************************/ -#define ORION_REGS_PHYS_BASE 0xf1000000 -#define ORION_REGS_VIRT_BASE 0xfdd00000 -#define ORION_REGS_SIZE SZ_1M - -#define ORION_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION_PCIE_IO_VIRT_BASE 0xfde00000 -#define ORION_PCIE_IO_BUS_BASE 0x00000000 -#define ORION_PCIE_IO_SIZE SZ_1M - -#define ORION_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION_PCI_IO_BUS_BASE 0x00100000 -#define ORION_PCI_IO_SIZE SZ_1M - -/* Relevant only for Orion-NAS */ -#define ORION_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION_PCIE_WA_VIRT_BASE 0xfe000000 -#define ORION_PCIE_WA_SIZE SZ_16M - -#define ORION_PCIE_MEM_PHYS_BASE 0xe0000000 -#define ORION_PCIE_MEM_SIZE SZ_128M - -#define ORION_PCI_MEM_PHYS_BASE 0xe8000000 -#define ORION_PCI_MEM_SIZE SZ_128M - -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 - -/******************************************************************************* - * Orion Registers Map - ******************************************************************************/ -#define ORION_DDR_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x00000) -#define ORION_DDR_REG(x) (ORION_DDR_VIRT_BASE | (x)) - -#define ORION_DEV_BUS_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x10000) -#define ORION_DEV_BUS_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x10000) -#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_VIRT_BASE | (x)) -#define I2C_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2100) - -#define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) -#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) - -#define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) -#define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) - -#define ORION_PCIE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x40000) -#define ORION_PCIE_REG(x) (ORION_PCIE_VIRT_BASE | (x)) - -#define ORION_USB0_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x50000) -#define ORION_USB0_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x50000) -#define ORION_USB0_REG(x) (ORION_USB0_VIRT_BASE | (x)) - -#define ORION_ETH_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x70000) -#define ORION_ETH_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x70000) -#define ORION_ETH_REG(x) (ORION_ETH_VIRT_BASE | (x)) - -#define ORION_SATA_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x80000) -#define ORION_SATA_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x80000) -#define ORION_SATA_REG(x) (ORION_SATA_VIRT_BASE | (x)) - -#define ORION_USB1_PHYS_BASE (ORION_REGS_PHYS_BASE | 0xa0000) -#define ORION_USB1_VIRT_BASE (ORION_REGS_VIRT_BASE | 0xa0000) -#define ORION_USB1_REG(x) (ORION_USB1_VIRT_BASE | (x)) - -/******************************************************************************* - * Device Bus Registers - ******************************************************************************/ -#define MPP_0_7_CTRL ORION_DEV_BUS_REG(0x000) -#define MPP_8_15_CTRL ORION_DEV_BUS_REG(0x004) -#define MPP_16_19_CTRL ORION_DEV_BUS_REG(0x050) -#define MPP_DEV_CTRL ORION_DEV_BUS_REG(0x008) -#define MPP_RESET_SAMPLE ORION_DEV_BUS_REG(0x010) -#define GPIO_OUT ORION_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF ORION_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN ORION_DEV_BUS_REG(0x108) -#define GPIO_IN_POL ORION_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN ORION_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE ORION_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK ORION_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK ORION_DEV_BUS_REG(0x11c) -#define DEV_BANK_0_PARAM ORION_DEV_BUS_REG(0x45c) -#define DEV_BANK_1_PARAM ORION_DEV_BUS_REG(0x460) -#define DEV_BANK_2_PARAM ORION_DEV_BUS_REG(0x464) -#define DEV_BANK_BOOT_PARAM ORION_DEV_BUS_REG(0x46c) -#define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) -#define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) -#define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) -#define GPIO_MAX 32 - -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION_BRIDGE_REG(0x100) -#define CPU_CTRL ORION_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION_BRIDGE_REG(0x108) -#define CPU_SOFT_RESET ORION_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110) -#define BRIDGE_MASK ORION_BRIDGE_REG(0x114) -#define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) -#define TIMER_CTRL ORION_BRIDGE_REG(0x300) -#define TIMER_VAL(x) ORION_BRIDGE_REG(0x314 + ((x) * 8)) -#define TIMER_VAL_RELOAD(x) ORION_BRIDGE_REG(0x310 + ((x) * 8)) - -#ifndef __ASSEMBLY__ - -/******************************************************************************* - * Helpers to access Orion registers - ******************************************************************************/ -#include <asm/types.h> -#include <asm/io.h> - -#define orion_read(r) __raw_readl(r) -#define orion_write(r, val) __raw_writel(val, r) - -/* - * These are not preempt safe. Locks, if needed, must be taken care by caller. - */ -#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) -#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_ORION_H__ */ diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h deleted file mode 100644 index 26c2c91..0000000 --- a/include/asm-arm/arch-orion/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * include/asm-arm/arch-orion/timex.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define ORION_TCLK 166666667 -#define CLOCK_TICK_RATE ORION_TCLK diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S index 2746220..4f98f3b 100644 --- a/include/asm-arm/arch-orion/debug-macro.S +++ b/include/asm-arm/arch-orion5x/debug-macro.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-orion/debug-macro.S + * include/asm-arm/arch-orion5x/debug-macro.S * * Debugging macro include header * @@ -8,13 +8,13 @@ * published by the Free Software Foundation. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION_REGS_PHYS_BASE - ldrne \rx, =ORION_REGS_VIRT_BASE + ldreq \rx, =ORION5X_REGS_PHYS_BASE + ldrne \rx, =ORION5X_REGS_VIRT_BASE orr \rx, \rx, #0x00012000 .endm diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion5x/dma.h index 40a8c17..40a8c17 100644 --- a/include/asm-arm/arch-orion/dma.h +++ b/include/asm-arm/arch-orion5x/dma.h diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S index cda096b..d8ef54c 100644 --- a/include/asm-arm/arch-orion/entry-macro.S +++ b/include/asm-arm/arch-orion5x/entry-macro.S @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/entry-macro.S + * include/asm-arm/arch-orion5x/entry-macro.S * * Low-level IRQ helper macros for Orion platforms * @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> .macro disable_fiq .endm diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion5x/gpio.h index d66284f9..c85e498 100644 --- a/include/asm-arm/arch-orion/gpio.h +++ b/include/asm-arm/arch-orion5x/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/gpio.h + * include/asm-arm/arch-orion5x/gpio.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -12,17 +12,17 @@ extern int gpio_direction_input(unsigned pin); extern int gpio_direction_output(unsigned pin, int value); extern int gpio_get_value(unsigned pin); extern void gpio_set_value(unsigned pin, int value); -extern void orion_gpio_set_blink(unsigned pin, int blink); +extern void orion5x_gpio_set_blink(unsigned pin, int blink); extern void gpio_display(void); /* debug */ static inline int gpio_to_irq(int pin) { - return pin + IRQ_ORION_GPIO_START; + return pin + IRQ_ORION5X_GPIO_START; } static inline int irq_to_gpio(int irq) { - return irq - IRQ_ORION_GPIO_START; + return irq - IRQ_ORION5X_GPIO_START; } #include <asm-generic/gpio.h> /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion5x/hardware.h index 65da374..5d2d8e0 100644 --- a/include/asm-arm/arch-orion/hardware.h +++ b/include/asm-arm/arch-orion5x/hardware.h @@ -1,21 +1,21 @@ /* - * include/asm-arm/arch-orion/hardware.h + * include/asm-arm/arch-orion5x/hardware.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H -#include "orion.h" +#include "orion5x.h" #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION_PCIE_MEM_PHYS_BASE +#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE #endif diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h new file mode 100644 index 0000000..5148ab7 --- /dev/null +++ b/include/asm-arm/arch-orion5x/io.h @@ -0,0 +1,68 @@ +/* + * include/asm-arm/arch-orion5x/io.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "orion5x.h" + +#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE + +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + + if (mtype == MT_DEVICE && size && paddr >= ORION5X_REGS_PHYS_BASE && + paddr + size <= ORION5X_REGS_PHYS_BASE + ORION5X_REGS_SIZE) { + retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + + (paddr - ORION5X_REGS_PHYS_BASE); + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || + addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) + __iounmap(addr); +} + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +/***************************************************************************** + * Helpers to access Orion registers + ****************************************************************************/ +#define orion5x_read(r) __raw_readl(r) +#define orion5x_write(r, val) __raw_writel(val, r) + +/* + * These are not preempt-safe. Locks, if needed, must be taken + * care of by the caller. + */ +#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask)) +#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask)) + + +#endif diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h new file mode 100644 index 0000000..abdd61a --- /dev/null +++ b/include/asm-arm/arch-orion5x/irqs.h @@ -0,0 +1,62 @@ +/* + * include/asm-arm/arch-orion5x/irqs.h + * + * IRQ definitions for Orion SoC + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "orion5x.h" /* need GPIO_MAX */ + +/* + * Orion Main Interrupt Controller + */ +#define IRQ_ORION5X_BRIDGE 0 +#define IRQ_ORION5X_DOORBELL_H2C 1 +#define IRQ_ORION5X_DOORBELL_C2H 2 +#define IRQ_ORION5X_UART0 3 +#define IRQ_ORION5X_UART1 4 +#define IRQ_ORION5X_I2C 5 +#define IRQ_ORION5X_GPIO_0_7 6 +#define IRQ_ORION5X_GPIO_8_15 7 +#define IRQ_ORION5X_GPIO_16_23 8 +#define IRQ_ORION5X_GPIO_24_31 9 +#define IRQ_ORION5X_PCIE0_ERR 10 +#define IRQ_ORION5X_PCIE0_INT 11 +#define IRQ_ORION5X_USB1_CTRL 12 +#define IRQ_ORION5X_DEV_BUS_ERR 14 +#define IRQ_ORION5X_PCI_ERR 15 +#define IRQ_ORION5X_USB_BR_ERR 16 +#define IRQ_ORION5X_USB0_CTRL 17 +#define IRQ_ORION5X_ETH_RX 18 +#define IRQ_ORION5X_ETH_TX 19 +#define IRQ_ORION5X_ETH_MISC 20 +#define IRQ_ORION5X_ETH_SUM 21 +#define IRQ_ORION5X_ETH_ERR 22 +#define IRQ_ORION5X_IDMA_ERR 23 +#define IRQ_ORION5X_IDMA_0 24 +#define IRQ_ORION5X_IDMA_1 25 +#define IRQ_ORION5X_IDMA_2 26 +#define IRQ_ORION5X_IDMA_3 27 +#define IRQ_ORION5X_CESA 28 +#define IRQ_ORION5X_SATA 29 +#define IRQ_ORION5X_XOR0 30 +#define IRQ_ORION5X_XOR1 31 + +/* + * Orion General Purpose Pins + */ +#define IRQ_ORION5X_GPIO_START 32 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion5x/memory.h index d954dba..80053a7 100644 --- a/include/asm-arm/arch-orion/memory.h +++ b/include/asm-arm/arch-orion5x/memory.h @@ -1,15 +1,16 @@ /* - * include/asm-arm/arch-orion/memory.h + * include/asm-arm/arch-orion5x/memory.h * * Marvell Orion memory definitions */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H #define PHYS_OFFSET UL(0x00000000) #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) + #endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h new file mode 100644 index 0000000..206ddd7 --- /dev/null +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -0,0 +1,159 @@ +/* + * include/asm-arm/arch-orion5x/orion5x.h + * + * Generic definitions of Orion SoC flavors: + * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_ORION5X_H +#define __ASM_ARCH_ORION5X_H + +/***************************************************************************** + * Orion Address Maps + * + * phys + * e0000000 PCIe MEM space + * e8000000 PCI MEM space + * f0000000 PCIe WA space (Orion-1/Orion-NAS only) + * f1000000 on-chip peripheral registers + * f2000000 PCIe I/O space + * f2100000 PCI I/O space + * f4000000 device bus mappings (boot) + * fa000000 device bus mappings (cs0) + * fa800000 device bus mappings (cs2) + * fc000000 device bus mappings (cs0/cs1) + * + * virt phys size + * fdd00000 f1000000 1M on-chip peripheral registers + * fde00000 f2000000 1M PCIe I/O space + * fdf00000 f2100000 1M PCI I/O space + * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) + ****************************************************************************/ +#define ORION5X_REGS_PHYS_BASE 0xf1000000 +#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_SIZE SZ_1M + +#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 +#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION5X_PCIE_IO_BUS_BASE 0x00000000 +#define ORION5X_PCIE_IO_SIZE SZ_1M + +#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 +#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION5X_PCI_IO_BUS_BASE 0x00100000 +#define ORION5X_PCI_IO_SIZE SZ_1M + +/* Relevant only for Orion-1/Orion-NAS */ +#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 +#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_SIZE SZ_16M + +#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 +#define ORION5X_PCIE_MEM_SIZE SZ_128M + +#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 +#define ORION5X_PCI_MEM_SIZE SZ_128M + +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 + +/******************************************************************************* + * Orion Registers Map + ******************************************************************************/ +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) + +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) + +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) + +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) + +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) + +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) + +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) + +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) + +/******************************************************************************* + * Device Bus Registers + ******************************************************************************/ +#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000) +#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004) +#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050) +#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008) +#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010) +#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100) +#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104) +#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108) +#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c) +#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110) +#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114) +#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118) +#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c) +#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c) +#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460) +#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464) +#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c) +#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0) +#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) +#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) +#define GPIO_MAX 32 + +/*************************************************************************** + * Orion CPU Bridge Registers + **************************************************************************/ +#define CPU_CONF ORION5X_BRIDGE_REG(0x100) +#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) +#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) +#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) +#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) +#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) +#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) +#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) + + +#endif diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion5x/system.h index 17704c6..3f1d1e2 100644 --- a/include/asm-arm/arch-orion/system.h +++ b/include/asm-arm/arch-orion5x/system.h @@ -1,10 +1,10 @@ /* - * include/asm-arm/arch-orion/system.h + * include/asm-arm/arch-orion5x/system.h * * Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -12,7 +12,7 @@ #define __ASM_ARCH_SYSTEM_H #include <asm/arch/hardware.h> -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> static inline void arch_idle(void) { @@ -24,8 +24,9 @@ static inline void arch_reset(char mode) /* * Enable and issue soft reset */ - orion_setbits(CPU_RESET_MASK, (1 << 2)); - orion_setbits(CPU_SOFT_RESET, 1); + orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(CPU_SOFT_RESET, 1); } + #endif diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h new file mode 100644 index 0000000..31c568e --- /dev/null +++ b/include/asm-arm/arch-orion5x/timex.h @@ -0,0 +1,13 @@ +/* + * include/asm-arm/arch-orion5x/timex.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) + +#define ORION5X_TCLK 166666667 diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h index 59f4403..5c13d4f 100644 --- a/include/asm-arm/arch-orion/uncompress.h +++ b/include/asm-arm/arch-orion5x/uncompress.h @@ -1,14 +1,14 @@ /* - * include/asm-arm/arch-orion/uncompress.h + * include/asm-arm/arch-orion5x/uncompress.h * * Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> #define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) #define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h index 9d58027..2b3061e 100644 --- a/include/asm-arm/arch-orion/vmalloc.h +++ b/include/asm-arm/arch-orion5x/vmalloc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/vmalloc.h + * include/asm-arm/arch-orion5x/vmalloc.h */ #define VMALLOC_END 0xfd800000 diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h new file mode 100644 index 0000000..39516ce --- /dev/null +++ b/include/asm-arm/arch-pxa/camera.h @@ -0,0 +1,48 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + int (*init)(struct device *); + int (*power)(struct device *, int); + int (*reset)(struct device *, int); + + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h new file mode 100644 index 0000000..6fa85c4 --- /dev/null +++ b/include/asm-arm/arch-pxa/gumstix.h @@ -0,0 +1,96 @@ +/* + * linux/include/asm-arm/arch-pxa/gumstix.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* BTRESET - Reset line to Bluetooth module, active low signal. */ +#define GPIO_GUMSTIX_BTRESET 7 +#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) + + +/* +GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean +interrupt signal for determining cable presence. On the original gumstix, +this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +this moves to GPIO17 and GPIO37. */ + +/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn +has detected a cable insertion; driven low otherwise. */ + +#ifdef CONFIG_ARCH_GUMSTIX_ORIG + +#define GPIO_GUMSTIX_USB_GPIOn 81 +#define GPIO_GUMSTIX_USB_GPIOx 83 + +#else + +#define GPIO_GUMSTIX_USB_GPIOn 35 +#define GPIO_GUMSTIX_USB_GPIOx 41 + +#endif + +/* usb state change */ +#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) + +#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) +#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) +#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) + +/* + * SD/MMC definitions + */ +#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ +#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ +#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) + +/* + * SMC Ethernet definitions + * ETH_RST provides a hardware reset line to the ethernet chip + * ETH is the IRQ line in from the ethernet chip to the PXA + */ +#define GPIO_GUMSTIX_ETH0_RST 80 +#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) +#define GPIO_GUMSTIX_ETH1_RST 52 +#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) + +#define GPIO_GUMSTIX_ETH0 36 +#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) +#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GPIO_GUMSTIX_ETH1 27 +#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) +#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) + + +/* CF reset line */ +#define GPIO8_RESET 8 + +/* CF slot 0 */ +#define GPIO4_nBVD1 4 +#define GPIO4_nSTSCHG GPIO4_nBVD1 +#define GPIO11_nCD 11 +#define GPIO26_PRDY_nBSY 26 +#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) + +/* CF slot 1 */ +#define GPIO18_nBVD1 18 +#define GPIO18_nSTSCHG GPIO18_nBVD1 +#define GPIO36_nCD 36 +#define GPIO27_PRDY_nBSY 27 +#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) + +/* CF GPIO line modes */ +#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) +#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) +#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) +#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) +#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) +#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) +#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h index 748406f..99f4f42 100644 --- a/include/asm-arm/arch-pxa/irda.h +++ b/include/asm-arm/arch-pxa/irda.h @@ -10,6 +10,8 @@ struct pxaficp_platform_data { int transceiver_cap; void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); }; extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index c562b97..50c77ea 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -181,7 +181,8 @@ #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) + defined(CONFIG_MACH_PCM027) || \ + defined(CONFIG_MACH_MAGICIAN) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h index 337f51f..b34fd56 100644 --- a/include/asm-arm/arch-pxa/magician.h +++ b/include/asm-arm/arch-pxa/magician.h @@ -12,7 +12,8 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ -#include <asm/arch/pxa-regs.h> +#include <asm/arch/irqs.h> +#include <asm/arch/pxa2xx-gpio.h> /* * PXA GPIOs @@ -34,6 +35,7 @@ #define GPIO48_MAGICIAN_UNKNOWN 48 #define GPIO56_MAGICIAN_UNKNOWN 56 #define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 #define GPIO83_MAGICIAN_nIR_EN 83 #define GPIO86_MAGICIAN_GSM_RESET 86 #define GPIO87_MAGICIAN_GSM_SELECT 87 @@ -81,6 +83,7 @@ #define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) #define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) #define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) +#define GPIO75_MAGICIAN_SAMSUNG_POWER_MD (75 | GPIO_OUT) #define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) #define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) #define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) @@ -108,4 +111,56 @@ #define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) #define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) +/* + * CPLD IRQs + */ + +#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) +#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) +#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) +#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) + +/* + * CPLD EGPIOs + */ + +#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO(reg,bit) \ + (MAGICIAN_EGPIO_BASE + 8*reg + bit) + +/* output */ + +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) + +/* input */ + +#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) +#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) + +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) + +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) + #endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h new file mode 100644 index 0000000..0499323 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa25x.h @@ -0,0 +1,161 @@ +#ifndef __ASM_ARCH_MFP_PXA25X_H +#define __ASM_ARCH_MFP_PXA25X_H + +#include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) + +#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) + +/* Crystal and Clock Signals */ +#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) +#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) +#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) +#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) +#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) +#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) +#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) +#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) + +/* PC CARD */ +#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) +#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) + +/* FFUART */ +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) + +/* BTUART */ +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* HWUART */ +#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) +#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) +#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) +#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) +#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) +#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1 */ +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) + +/* AC97 */ +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) + +/* SSP 2 - NSSP */ +#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) +#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) +#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) +#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) +#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) +#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) + +/* MMC */ +#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) +#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) +#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) +#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) +#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) +#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) +#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) + +#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h new file mode 100644 index 0000000..eb6eaa1 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -0,0 +1,432 @@ +#ifndef __ASM_ARCH_MFP_PXA27X_H +#define __ASM_ARCH_MFP_PXA27X_H + +/* + * NOTE: for those special-function bidirectional GPIOs, as described + * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input + * alternative is preserved, the direction is actually selected by the + * specific controller, and this should work in most cases. + */ + +#include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) + +/* Crystal and Clock Signals */ +#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) +#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) +#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) + +/* OS Timer Signals */ +#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) +#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) +#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) +#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) +#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) +#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) +#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) +#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) +#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) +#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) +#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) +#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) +#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) +#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) +#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) +#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) +#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) +#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) +#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) +#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) + +/* PC CARD */ +#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) +#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) +#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) +#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) +#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) +#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) +#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) + +/* I2C */ +#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) +#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) + +/* FFUART */ +#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) +#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) +#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) +#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) +#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) +#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) +#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) +#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) +#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) +#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) +#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) +#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) +#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) +#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) + +/* BTUART */ +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1/2/3 */ +#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) +#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) +#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) +#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) +#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) +#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) +#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) +#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) + +/* AC97 */ +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) +#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) +#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) +#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) +#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) +#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) +#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) +#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) +#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) +#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) + +/* SSP 2 */ +#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) +#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) +#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) +#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) +#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) +#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) +#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) +#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) +#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) +#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) +#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) +#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) +#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) +#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) +#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) +#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) +#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) +#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) +#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) +#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) +#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) +#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) +#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) + +/* SSP 3 */ +#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) +#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) +#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) +#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) +#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) +#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) +#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) +#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) +#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) +#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) +#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) +#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) +#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) + +/* MMC */ +#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) +#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) +#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) +#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) +#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) +#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) +#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) +#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) +#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) + +/* Keypad */ +#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) +#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) +#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) +#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) +#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) +#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) +#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) +#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) +#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) +#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) +#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) +#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) +#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) +#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) +#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) +#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) +#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) +#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) +#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) +#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) +#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) +#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) +#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) +#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) +#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) +#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) +#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) +#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) +#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) +#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) +#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) +#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) +#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) +#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) + +/* USB P3 */ +#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) +#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) +#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) +#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) +#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) +#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) +#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) +#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) +#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) +#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) + +/* USB P2 */ +#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) +#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) +#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) +#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) +#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) +#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) +#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) +#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) + +/* USB Host Port 1/2 */ +#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) +#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) +#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) +#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) + +/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ +#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) +#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) +#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) +#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) +#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) +#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) +#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) +#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) +#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) +#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) +#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) +#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) +#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) +#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) +#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) +#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) +#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) +#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) +#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) +#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) +#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) +#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) +#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) +#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) +#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) +#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) +#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) +#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) +#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) +#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) +#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) +#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) +#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) +#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) +#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) +#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) +#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) + +/* Universal Subscriber ID Interface */ +#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) +#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) +#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) +#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) +#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) +#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) +#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) +#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) +#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) +#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) + +/* Mobile Scalable Link (MSL) Interface */ +#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) +#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) +#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) +#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) +#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) +#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) +#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) +#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) +#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) +#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) +#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) +#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) + +/* Memory Stick Host Controller */ +#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) +#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) +#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) +#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +extern int keypad_set_wake(unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h new file mode 100644 index 0000000..db8d890 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -0,0 +1,132 @@ +#ifndef __ASM_ARCH_MFP_PXA2XX_H +#define __ASM_ARCH_MFP_PXA2XX_H + +#include <asm/arch/mfp.h> + +/* + * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: + * + * MFP_PIN(x) + * MFP_AFx + * MFP_LPM_DRIVE_{LOW, HIGH} + * MFP_LPM_EDGE_x + * + * other MFP_x bit definitions will be ignored + * + * and adds the below two bits specifically for pxa2xx: + * + * bit 23 - Input/Output (PXA2xx specific) + * bit 24 - Wakeup Enable(PXA2xx specific) + */ + +#define MFP_DIR_IN (0x0 << 23) +#define MFP_DIR_OUT (0x1 << 23) +#define MFP_DIR_MASK (0x1 << 23) +#define MFP_DIR(x) (((x) >> 23) & 0x1) + +#define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) +#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) +#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) + +/* specifically for enabling wakeup on keypad GPIOs */ +#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) + +#define MFP_CFG_IN(pin, af) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) + +/* NOTE: pins configured as output _must_ provide a low power state, + * and this state should help to minimize the power dissipation. + */ +#define MFP_CFG_OUT(pin, af, state) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) + +/* Common configurations for pxa25x and pxa27x + * + * Note: pins configured as GPIO are always initialized to input + * so not to cause any side effect + */ +#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) +#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) + +extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern int gpio_set_wake(unsigned int gpio, unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 2357a73..a322012 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1129,6 +1129,11 @@ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ /* * General Purpose I/O @@ -1200,12 +1205,6 @@ /* Interrupt Controller */ -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) @@ -1237,267 +1236,6 @@ #endif - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - /* * Power Manager */ @@ -1866,62 +1604,6 @@ #ifdef CONFIG_PXA27x -/* - * Keypad - */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ -#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ -#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) - /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) @@ -1953,7 +1635,7 @@ #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ #define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ +#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ #define CICR1_RGB_F (1 << 11) /* RGB format */ diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h index 644f760..d5a48a9 100644 --- a/include/asm-arm/arch-pxa/pxa27x_keypad.h +++ b/include/asm-arm/arch-pxa/pxa27x_keypad.h @@ -53,4 +53,6 @@ struct pxa27x_keypad_platform_data { #define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h new file mode 100644 index 0000000..763313c --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -0,0 +1,357 @@ +#ifndef __ASM_ARCH_PXA2XX_GPIO_H +#define __ASM_ARCH_PXA2XX_GPIO_H + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO7_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO24_CIF_FV 24 /* Camera frame start signal */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO25_CIF_LV 25 /* Camera line start signal */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO32_SYSCLK 32 /* I2S System Clock */ +#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ +#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ +#define GPIO43_CIF_FV 43 /* Camera frame start signal */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ +#define GPIO44_CIF_LV 44 /* Camera line start signal */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ +#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ +#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ +#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ +#define GPIO81_NSCLK 81 /* NSSP clock */ +#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ +#define GPIO82_NSFRM 82 /* NSSP Frame */ +#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ +#define GPIO83_NSTXD 83 /* NSSP transmit */ +#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ +#define GPIO84_NSRXD 84 /* NSSP receive */ +#define GPIO84_CIF_FV 84 /* Camera frame start signal */ +#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO85_CIF_LV 85 /* Camera line start signal */ +#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ +#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ +#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ +#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ +#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ +#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ +#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ +#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ +#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ +#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ +#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ +#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ +#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ +#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ +#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ +#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ +#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ +#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ +#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ +#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ +#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 +#define GPIO_DFLT_LOW 0x400 +#define GPIO_DFLT_HIGH 0x800 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) +#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) +#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) +#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) +#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) +#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) +#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) +#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) +#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) +#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) +#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) +#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) +#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) +#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) +#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) +#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) +#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) +#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) +#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) +#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) +#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) +#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) +#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) +#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) +#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) +#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) +#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) +#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) +#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) +#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) +#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) +#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) +#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) +#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) +#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) +#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) +#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) + +#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 8e1b3ea..fe9364c 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -12,6 +12,15 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H + +/* + * Oscillator Configuration Register (OSCC) + */ +#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ + +#define OSCC_PEN (1 << 11) /* 13MHz POUT */ + + /* * Service Power Management Unit (MPMU) */ diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h new file mode 100644 index 0000000..81a8937 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa3xx_nand.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_PXA3XX_NAND_H +#define __ASM_ARCH_PXA3XX_NAND_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +struct pxa3xx_nand_platform_data { + + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int enable_arbiter; + + struct mtd_partition *parts; + unsigned int nr_parts; +}; +#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c05e4fa..c5b6fde 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -23,11 +23,12 @@ /* * SCOOP2 internal GPIOs */ +#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 -#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 -#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 -#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) +#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) +#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 #define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 @@ -35,7 +36,7 @@ /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ - TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_AUD_PWR_ON |\ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) /* GPIO out put level when init 1: Hi */ #define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) @@ -43,23 +44,21 @@ /* * SCOOP2 jacket GPIOs */ -#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 -#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 -#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 -#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) +#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) +#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) +#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) #define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 #define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 -#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ - TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ +#define TOSA_SCOOP_JC_IO_DIR ( \ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_JC_IO_OUT ( 0 ) + TOSA_SCOOP_JC_CARD_LIMIT_SEL ) /* * Timing Generator @@ -74,15 +73,6 @@ #define TG_HPOSCTL 0x07 /* - * LED - */ -#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 -#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 -#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 -#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 - - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) @@ -161,12 +151,8 @@ #define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) -extern struct platform_device tosascoop_jc_device; -extern struct platform_device tosascoop_device; - #define TOSA_KEY_SYNC KEY_102ND /* ??? */ - #ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index 5f717d6..4881b80 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -18,6 +18,8 @@ extern struct platform_mmc_slot zylonite_mmc_slot[]; extern int gpio_backlight; extern int gpio_eth_irq; +extern int wm9713_irq; + extern int lcd_id; extern int lcd_orientation; diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h index 3e437b7..206f7a7 100644 --- a/include/asm-arm/arch-realview/board-eb.h +++ b/include/asm-arm/arch-realview/board-eb.h @@ -26,6 +26,26 @@ /* * RealView EB + ARM11MPCore peripheral addresses */ +#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ + +#define REALVIEW_EB_FLASH_BASE 0x40000000 +#define REALVIEW_EB_FLASH_SIZE SZ_64M +#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ + #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB #define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h new file mode 100644 index 0000000..48ce9c8 --- /dev/null +++ b/include/asm-arm/arch-realview/board-pb1176.h @@ -0,0 +1,152 @@ +/* + * include/asm-arm/arch-realview/board-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB1176_H +#define __ASM_ARCH_BOARD_PB1176_H + +#include <asm/arch/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ +#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ +#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ +#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_PB1176_FLASH_BASE 0x30000000 +#define REALVIEW_PB1176_FLASH_SIZE SZ_64M + +#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ +#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ +#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ +#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ +#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ +#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ +#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ +#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ +#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ +#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ +#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ +#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ +#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ +#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ + +/* + * PCI regions + */ +#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ +#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ +#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ +#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ +#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ +#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ + +#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ + +#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ +#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ +#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ +#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h new file mode 100644 index 0000000..a1294d9 --- /dev/null +++ b/include/asm-arm/arch-realview/board-pb11mp.h @@ -0,0 +1,186 @@ +/* + * include/asm-arm/arch-realview/board-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB11MP_H +#define __ASM_ARCH_BOARD_PB11MP_H + +#include <asm/arch/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 +#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M +#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 +#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M +#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 + +/* + * PB11MPCore PCI regions + */ +#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Testchip peripheral and fpga gic regions + */ +#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ +#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ +#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 +#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 +#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ +#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S index f17efc6..c8c860c 100644 --- a/include/asm-arm/arch-realview/debug-macro.S +++ b/include/asm-arm/arch-realview/debug-macro.S @@ -15,7 +15,7 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base + movne \rx, #0xf0000000 @ virtual base orr \rx, \rx, #0x00009000 .endm diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index bad8d7c..1ee8313 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -25,7 +25,7 @@ #include <asm/sizes.h> /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000) +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) #define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h index ad0c911..ccbac59 100644 --- a/include/asm-arm/arch-realview/irqs.h +++ b/include/asm-arm/arch-realview/irqs.h @@ -23,6 +23,8 @@ #define __ASM_ARCH_IRQS_H #include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/board-pb1176.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h index 4fd351b..424c0aa 100644 --- a/include/asm-arm/arch-realview/platform.h +++ b/include/asm-arm/arch-realview/platform.h @@ -32,9 +32,6 @@ #define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ #define REALVIEW_SSRAM_SIZE SZ_2M -#define REALVIEW_FLASH_BASE 0x40000000 -#define REALVIEW_FLASH_SIZE SZ_64M - /* * SDRAM */ @@ -175,42 +172,20 @@ #define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ /* - * REALVIEW peripheral addresses + * RealView common peripheral addresses */ #define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ #define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ - /* Reserved 0x10003000 */ #define REALVIEW_AACI_BASE 0x10004000 /* Audio */ #define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ #define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ #define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ #define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ #define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ - /* Reserved 0x1000F000 */ -#define REALVIEW_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_GPIO0_BASE 0x10013000 /* GPIO port 0 */ #define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ #define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ - /* Reserved 0x10016000 */ -#define REALVIEW_RTC_BASE 0x10017000 /* Real Time Clock */ #define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_PCI_CORE_BASE 0x10019000 /* PCI configuration */ - /* Reserved 0x1001A000 - 0x1001FFFF */ -#define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */ #define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ -#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_SMC_BASE 0x10080000 /* SMC */ - /* Reserved 0x10090000 - 0x100EFFFF */ - -#define REALVIEW_ETH_BASE 0x4E000000 /* Ethernet */ /* PCI space */ #define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h index 08b3db8..d55802d 100644 --- a/include/asm-arm/arch-realview/scu.h +++ b/include/asm-arm/arch-realview/scu.h @@ -1,8 +1,13 @@ #ifndef __ASMARM_ARCH_SCU_H #define __ASMARM_ARCH_SCU_H -#include <asm/arch/board-eb.h> - -#define SCU_BASE REALVIEW_EB11MP_SCU_BASE +/* + * SCU registers + */ +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 #endif diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index 3d5c2db..4c905d7 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -18,28 +18,50 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <asm/hardware.h> +#include <asm/mach-types.h> -#include <asm/arch/platform.h> +#include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/board-pb1176.h> -#define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00)) -#define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c)) -#define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30)) -#define AMBA_UART_FR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18)) +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_realview_eb()) + return REALVIEW_EB_UART0_BASE; + else if (machine_is_realview_pb11mp()) + return REALVIEW_PB11MP_UART0_BASE; + else if (machine_is_realview_pb1176()) + return REALVIEW_PB1176_UART0_BASE; + else + return 0; +} /* * This does not append a newline */ static inline void putc(int c) { - while (AMBA_UART_FR & (1 << 5)) + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) barrier(); - AMBA_UART_DR = c; + AMBA_UART_DR(base) = c; } static inline void flush(void) { - while (AMBA_UART_FR & (1 << 3)) + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) barrier(); } diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index dba9df9..ecae9e7 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -137,7 +137,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) #define S3C2412_CLKDIVN_DVSEN (1<<4) #define S3C2412_CLKDIVN_HALFHCLK (1<<5) #define S3C2412_CLKDIVN_USB48DIV (1<<6) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 0ad75d7..497dd06 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -529,11 +529,13 @@ #define S3C2410_GPD14_INP (0x00 << 28) #define S3C2410_GPD14_OUTP (0x01 << 28) #define S3C2410_GPD14_VD22 (0x02 << 28) +#define S3C2410_GPD14_nSS1 (0x03 << 28) #define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) #define S3C2410_GPD15_INP (0x00 << 30) #define S3C2410_GPD15_OUTP (0x01 << 30) #define S3C2410_GPD15_VD23 (0x02 << 30) +#define S3C2410_GPD15_nSS0 (0x03 << 30) #define S3C2410_GPD_PUPDIS(x) (1<<(x)) @@ -801,12 +803,14 @@ #define S3C2410_GPG2_INP (0x00 << 4) #define S3C2410_GPG2_OUTP (0x01 << 4) #define S3C2410_GPG2_EINT10 (0x02 << 4) +#define S3C2410_GPG2_nSS0 (0x03 << 4) #define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) #define S3C2410_GPG3_INP (0x00 << 6) #define S3C2410_GPG3_OUTP (0x01 << 6) #define S3C2410_GPG3_EINT11 (0x02 << 6) +#define S3C2410_GPG3_nSS1 (0x03 << 6) #define S3C2400_GPG3_I2SSDO (0x02 << 6) #define S3C2400_GPG3_I2SSDI (0x03 << 6) diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h new file mode 100644 index 0000000..c8c793e --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2412_MEM +#define __ASM_ARM_REGS_S3C2412_MEM + +#ifndef S3C2412_MEMREG +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) +#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) +#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) +#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) +#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h new file mode 100644 index 0000000..1615bce --- /dev/null +++ b/include/asm-arm/arch-s3c2410/system-reset.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/arch-s3c2410/system-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/plat-s3c/regs-watchdog.h> +#include <asm/arch/regs-clock.h> + +#include <linux/clk.h> +#include <linux/err.h> + +extern void (*s3c24xx_reset_hook)(void); + +static void +arch_reset(char mode) +{ + struct clk *wdtclk; + + if (mode == 's') { + cpu_reset(0); + } + + if (s3c24xx_reset_hook) + s3c24xx_reset_hook(); + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); +} diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 14de4e5..ad25808 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -17,12 +17,8 @@ #include <asm/arch/idle.h> #include <asm/arch/reset.h> -#include <asm/plat-s3c/regs-watchdog.h> #include <asm/arch/regs-clock.h> -#include <linux/clk.h> -#include <linux/err.h> - void (*s3c24xx_idle)(void); void (*s3c24xx_reset_hook)(void); @@ -59,44 +55,4 @@ static void arch_idle(void) s3c24xx_default_idle(); } -static void -arch_reset(char mode) -{ - struct clk *wdtclk; - - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} +#include <asm/arch/system-reset.h> diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h index e7a9d26..93d3395 100644 --- a/include/asm-arm/arch-sa1100/gpio.h +++ b/include/asm-arm/arch-sa1100/gpio.h @@ -26,35 +26,28 @@ #include <asm/hardware.h> #include <asm/irq.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - +#include <asm-generic/gpio.h> static inline int gpio_get_value(unsigned gpio) { - return GPLR & GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + return GPLR & GPIO_GPIO(gpio); + else + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned gpio, int value) { - if (value) - GPSR = GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + if (value) + GPSR = GPIO_GPIO(gpio); + else + GPCR = GPIO_GPIO(gpio); else - GPCR = GPIO_GPIO(gpio); + __gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ +#define gpio_cansleep __gpio_cansleep static inline unsigned gpio_to_irq(unsigned gpio) { diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index 715e18a..3479de9 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -21,6 +21,10 @@ extern struct processor { */ void (*_data_abort)(unsigned long pc); /* + * Retrieve prefetch fault address + */ + unsigned long (*_prefetch_abort)(unsigned long lr); + /* * Set up any processor specifics */ void (*_proc_init)(void); diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h index 22274ce..a97a182 100644 --- a/include/asm-arm/glue.h +++ b/include/asm-arm/glue.h @@ -40,83 +40,110 @@ * v6_early - ARMv6 generic early abort handler * v7_early - ARMv7 generic early abort handler */ -#undef CPU_ABORT_HANDLER -#undef MULTI_ABORT +#undef CPU_DABORT_HANDLER +#undef MULTI_DABORT #if defined(CONFIG_CPU_ARM610) -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER cpu_arm6_data_abort +# define CPU_DABORT_HANDLER cpu_arm6_data_abort # endif #endif #if defined(CONFIG_CPU_ARM710) -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER cpu_arm7_data_abort +# define CPU_DABORT_HANDLER cpu_arm7_data_abort # endif #endif #ifdef CONFIG_CPU_ABRT_LV4T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4t_late_abort +# define CPU_DABORT_HANDLER v4t_late_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV4 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4_early_abort +# define CPU_DABORT_HANDLER v4_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV4T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4t_early_abort +# define CPU_DABORT_HANDLER v4t_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV5TJ -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v5tj_early_abort +# define CPU_DABORT_HANDLER v5tj_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV5T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v5t_early_abort +# define CPU_DABORT_HANDLER v5t_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV6 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v6_early_abort +# define CPU_DABORT_HANDLER v6_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV7 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v7_early_abort +# define CPU_DABORT_HANDLER v7_early_abort # endif #endif -#ifndef CPU_ABORT_HANDLER +#ifndef CPU_DABORT_HANDLER #error Unknown data abort handler type #endif +/* + * Prefetch abort handler. If the CPU has an IFAR use that, otherwise + * use the address of the aborted instruction + */ +#undef CPU_PABORT_HANDLER +#undef MULTI_PABORT + +#ifdef CONFIG_CPU_PABRT_IFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_NOIFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn +# endif +#endif + +#ifndef CPU_PABORT_HANDLER +#error Unknown prefetch abort handler type +#endif + #endif diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h deleted file mode 100644 index 7d28eb5..0000000 --- a/include/asm-arm/hardware/arm_scu.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_HARDWARE_ARM_SCU_H -#define ASMARM_HARDWARE_ARM_SCU_H - -#include <asm/arch/scu.h> - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h index 84d635b..a32b86a 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/include/asm-arm/hardware/iop3xx-adma.h @@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - const static int slot_count_table[] = { 0, + static const int slot_count_table[] = { 0, 1, 1, 1, 1, /* 01 - 04 */ 2, 2, 2, 2, /* 05 - 08 */ 4, 4, 4, 4, /* 09 - 12 */ @@ -369,7 +369,7 @@ static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, /* translate the src_idx to a descriptor word index */ static inline int __desc_idx(int src_idx) { - const static int desc_idx_table[] = { 0, 0, 0, 0, + static const int desc_idx_table[] = { 0, 0, 0, 0, 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index ede377e..18f6937 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -29,6 +29,7 @@ extern void gpio_line_config(int line, int direction); extern int gpio_line_get(int line); extern void gpio_line_set(int line, int value); extern int init_atu; +extern int iop3xx_get_init_atu(void); #endif @@ -112,14 +113,6 @@ extern int init_atu; #define IOP3XX_INIT_ATU_DISABLE -1 #define IOP3XX_INIT_ATU_ENABLE 1 -#ifdef CONFIG_IOP3XX_ATU -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_ENABLE : init_atu) -#else -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_DISABLE : init_atu) -#endif - /* Messaging Unit */ #define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) #define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h index d37bf74..dfb8330 100644 --- a/include/asm-arm/hardware/scoop.h +++ b/include/asm-arm/hardware/scoop.h @@ -40,6 +40,7 @@ struct scoop_config { unsigned short io_dir; unsigned short suspend_clr; unsigned short suspend_set; + int gpio_base; }; /* Structure for linking scoop devices to PCMCIA sockets */ @@ -62,7 +63,7 @@ struct scoop_pcmcia_config { extern struct scoop_pcmcia_config *platform_scoop_config; void reset_scoop(struct device *dev); -unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); unsigned short read_scoop_reg(struct device *dev, unsigned short reg); void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hwcap.h b/include/asm-arm/hwcap.h index 01a1391..81f4c89 100644 --- a/include/asm-arm/hwcap.h +++ b/include/asm-arm/hwcap.h @@ -15,6 +15,7 @@ #define HWCAP_JAVA 256 #define HWCAP_IWMMXT 512 #define HWCAP_CRUNCH 1024 +#define HWCAP_THUMBEE 2048 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index 24621c4..9d4f6b5 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -55,6 +55,7 @@ void pci_common_init(struct hw_pci *); extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); extern void iop3xx_pci_preinit(void); +extern void iop3xx_pci_preinit_cond(void); extern int dc21285_setup(int nr, struct pci_sys_data *); extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index d9bfb39..9ba4d71 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -217,7 +217,10 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #ifndef CONFIG_DISCONTIGMEM #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + +#ifndef CONFIG_SPARSEMEM #define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h new file mode 100644 index 0000000..7857056 --- /dev/null +++ b/include/asm-arm/plat-orion/ehci-orion.h @@ -0,0 +1,19 @@ +/* + * include/asm-arm/plat-orion/ehci-orion.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_EHCI_ORION_H +#define __ASM_PLAT_ORION_EHCI_ORION_H + +#include <linux/mbus.h> + +struct orion_ehci_data { + struct mbus_dram_target_info *dram; +}; + + +#endif diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h new file mode 100644 index 0000000..94aeed9 --- /dev/null +++ b/include/asm-arm/plat-orion/irq.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/irq.h + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_IRQ_H +#define __ASM_PLAT_ORION_IRQ_H + +void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); + + +#endif diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/plat-orion/orion_nand.h index 143c38e..ffd3852 100644 --- a/include/asm-arm/arch-orion/platform.h +++ b/include/asm-arm/plat-orion/orion_nand.h @@ -1,15 +1,13 @@ /* - * asm-arm/arch-orion/platform.h - * - * Tzachi Perelstein <tzachi@marvell.com> + * include/asm-arm/plat-orion/orion_nand.h * * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ +#ifndef __ASM_PLAT_ORION_ORION_NAND_H +#define __ASM_PLAT_ORION_ORION_NAND_H /* * Device bus NAND private data @@ -22,4 +20,5 @@ struct orion_nand_data { u8 width; /* buswidth */ }; + #endif diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h new file mode 100644 index 0000000..6434ac6 --- /dev/null +++ b/include/asm-arm/plat-orion/pcie.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/plat-orion/pcie.h + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_PCIE_H +#define __ASM_PLAT_ORION_PCIE_H + +u32 orion_pcie_dev_id(void __iomem *base); +u32 orion_pcie_rev(void __iomem *base); +int orion_pcie_link_up(void __iomem *base); +int orion_pcie_get_local_bus_nr(void __iomem *base); +void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram); +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val); + + +#endif diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h new file mode 100644 index 0000000..0e85cc8f --- /dev/null +++ b/include/asm-arm/plat-orion/time.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/time.h + * + * Marvell Orion SoC time handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_TIME_H +#define __ASM_PLAT_ORION_TIME_H + +void orion_time_init(unsigned int irq, unsigned int tclk); + + +#endif diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h index 8816f7f..ad6bbe9 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/include/asm-arm/plat-s3c/nand.h @@ -22,11 +22,14 @@ */ struct s3c2410_nand_set { + unsigned int disable_ecc : 1; + int nr_chips; int nr_partitions; char *name; int *nr_map; struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; }; struct s3c2410_platform_nand { @@ -36,6 +39,8 @@ struct s3c2410_platform_nand { int twrph0; /* active time for nWE/nOE */ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + unsigned int ignore_unset_ecc : 1; + int nr_sets; struct s3c2410_nand_set *sets; diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h new file mode 100644 index 0000000..2771581 --- /dev/null +++ b/include/asm-arm/sparsemem.h @@ -0,0 +1,10 @@ +#ifndef ASMARM_SPARSEMEM_H +#define ASMARM_SPARSEMEM_H + +#include <asm/memory.h> + +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS + +#endif diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 4178435..f5a6647 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -62,6 +62,9 @@ struct thread_info { struct crunch_state crunchstate; union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; +#ifdef CONFIG_ARM_THUMBEE + unsigned long thumbee_state; /* ThumbEE Handler Base register */ +#endif struct restart_block restart_block; }; diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 88e868b..7c57008 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -376,9 +376,11 @@ #define __NR_kexec_load (__NR_SYSCALL_BASE+347) #define __NR_utimensat (__NR_SYSCALL_BASE+348) #define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd (__NR_SYSCALL_BASE+350) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) #define __NR_eventfd (__NR_SYSCALL_BASE+351) #define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) /* * The following SWIs are ARM private. diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 7597b0b..a4e2d28 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -38,9 +38,7 @@ struct platform_device * at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, unsigned long fbmem_start, unsigned long fbmem_len); -struct usba_platform_data { - int vbus_pin; -}; +struct usba_platform_data; struct platform_device * at32_add_device_usba(unsigned int id, struct usba_platform_data *data); @@ -68,7 +66,10 @@ struct platform_device *at32_add_device_pwm(u32 mask); struct platform_device * at32_add_device_ssc(unsigned int id, unsigned int flags); -struct platform_device *at32_add_device_twi(unsigned int id); +struct i2c_board_info; +struct platform_device *at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n); struct platform_device *at32_add_device_mci(unsigned int id); struct platform_device *at32_add_device_ac97c(unsigned int id); struct platform_device *at32_add_device_abdac(unsigned int id); diff --git a/include/asm-avr32/arch-at32ap/pm.h b/include/asm-avr32/arch-at32ap/pm.h new file mode 100644 index 0000000..356e430 --- /dev/null +++ b/include/asm-avr32/arch-at32ap/pm.h @@ -0,0 +1,48 @@ +/* + * AVR32 AP Power Management. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_PM_H +#define __ASM_AVR32_ARCH_PM_H + +/* Possible arguments to the "sleep" instruction */ +#define CPU_SLEEP_IDLE 0 +#define CPU_SLEEP_FROZEN 1 +#define CPU_SLEEP_STANDBY 2 +#define CPU_SLEEP_STOP 3 +#define CPU_SLEEP_STATIC 5 + +#ifndef __ASSEMBLY__ +extern void cpu_enter_idle(void); + +extern bool disable_idle_sleep; + +static inline void cpu_disable_idle_sleep(void) +{ + disable_idle_sleep = true; +} + +static inline void cpu_enable_idle_sleep(void) +{ + disable_idle_sleep = false; +} + +static inline void cpu_idle_sleep(void) +{ + /* + * If we're using the COUNT and COMPARE registers for + * timekeeping, we can't use the IDLE state. + */ + if (disable_idle_sleep) + cpu_relax(); + else + cpu_enter_idle(); +} +#endif + +#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h deleted file mode 100644 index cc8a434..0000000 --- a/include/asm-avr32/arch-at32ap/time.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H -#define _ASM_AVR32_ARCH_AT32AP_TIME_H - -#include <linux/platform_device.h> - -extern struct irqaction timer_irqaction; -extern struct platform_device at32_systc0_device; -extern void local_timer_interrupt(int irq, void *dev_id); - -#define TIMER_BCR 0x000000c0 -#define TIMER_BCR_SYNC 0 -#define TIMER_BMR 0x000000c4 -#define TIMER_BMR_TC0XC0S 0 -#define TIMER_BMR_TC1XC1S 2 -#define TIMER_BMR_TC2XC2S 4 -#define TIMER_CCR 0x00000000 -#define TIMER_CCR_CLKDIS 1 -#define TIMER_CCR_CLKEN 0 -#define TIMER_CCR_SWTRG 2 -#define TIMER_CMR 0x00000004 -#define TIMER_CMR_ABETRG 10 -#define TIMER_CMR_ACPA 16 -#define TIMER_CMR_ACPC 18 -#define TIMER_CMR_AEEVT 20 -#define TIMER_CMR_ASWTRG 22 -#define TIMER_CMR_BCPB 24 -#define TIMER_CMR_BCPC 26 -#define TIMER_CMR_BEEVT 28 -#define TIMER_CMR_BSWTRG 30 -#define TIMER_CMR_BURST 4 -#define TIMER_CMR_CLKI 3 -#define TIMER_CMR_CPCDIS 7 -#define TIMER_CMR_CPCSTOP 6 -#define TIMER_CMR_CPCTRG 14 -#define TIMER_CMR_EEVT 10 -#define TIMER_CMR_EEVTEDG 8 -#define TIMER_CMR_ENETRG 12 -#define TIMER_CMR_ETRGEDG 8 -#define TIMER_CMR_LDBDIS 7 -#define TIMER_CMR_LDBSTOP 6 -#define TIMER_CMR_LDRA 16 -#define TIMER_CMR_LDRB 18 -#define TIMER_CMR_TCCLKS 0 -#define TIMER_CMR_WAVE 15 -#define TIMER_CMR_WAVSEL 13 -#define TIMER_CV 0x00000010 -#define TIMER_CV_CV 0 -#define TIMER_IDR 0x00000028 -#define TIMER_IDR_COVFS 0 -#define TIMER_IDR_CPAS 2 -#define TIMER_IDR_CPBS 3 -#define TIMER_IDR_CPCS 4 -#define TIMER_IDR_ETRGS 7 -#define TIMER_IDR_LDRAS 5 -#define TIMER_IDR_LDRBS 6 -#define TIMER_IDR_LOVRS 1 -#define TIMER_IER 0x00000024 -#define TIMER_IER_COVFS 0 -#define TIMER_IER_CPAS 2 -#define TIMER_IER_CPBS 3 -#define TIMER_IER_CPCS 4 -#define TIMER_IER_ETRGS 7 -#define TIMER_IER_LDRAS 5 -#define TIMER_IER_LDRBS 6 -#define TIMER_IER_LOVRS 1 -#define TIMER_IMR 0x0000002c -#define TIMER_IMR_COVFS 0 -#define TIMER_IMR_CPAS 2 -#define TIMER_IMR_CPBS 3 -#define TIMER_IMR_CPCS 4 -#define TIMER_IMR_ETRGS 7 -#define TIMER_IMR_LDRAS 5 -#define TIMER_IMR_LDRBS 6 -#define TIMER_IMR_LOVRS 1 -#define TIMER_RA 0x00000014 -#define TIMER_RA_RA 0 -#define TIMER_RB 0x00000018 -#define TIMER_RB_RB 0 -#define TIMER_RC 0x0000001c -#define TIMER_RC_RC 0 -#define TIMER_SR 0x00000020 -#define TIMER_SR_CLKSTA 16 -#define TIMER_SR_COVFS 0 -#define TIMER_SR_CPAS 2 -#define TIMER_SR_CPBS 3 -#define TIMER_SR_CPCS 4 -#define TIMER_SR_ETRGS 7 -#define TIMER_SR_LDRAS 5 -#define TIMER_SR_LDRBS 6 -#define TIMER_SR_LOVRS 1 -#define TIMER_SR_MTIOA 17 -#define TIMER_SR_MTIOB 18 - -/* Bit manipulation macros */ -#define TIMER_BIT(name) (1 << TIMER_##name) -#define TIMER_BF(name,value) ((value) << TIMER_##name) - -/* Register access macros */ -#define timer_read(port,instance,reg) \ - __raw_readl(port + (0x40 * instance) + TIMER_##reg) -#define timer_write(port,instance,reg,value) \ - __raw_writel((value), port + (0x40 * instance) + TIMER_##reg) - -#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */ diff --git a/include/asm-avr32/asm.h b/include/asm-avr32/asm.h index 515c761..a2c64f4 100644 --- a/include/asm-avr32/asm.h +++ b/include/asm-avr32/asm.h @@ -12,10 +12,10 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#define mask_interrupts ssrf SR_GM_BIT -#define mask_exceptions ssrf SR_EM_BIT -#define unmask_interrupts csrf SR_GM_BIT -#define unmask_exceptions csrf SR_EM_BIT +#define mask_interrupts ssrf SYSREG_GM_OFFSET +#define mask_exceptions ssrf SYSREG_EM_OFFSET +#define unmask_interrupts csrf SYSREG_GM_OFFSET +#define unmask_exceptions csrf SYSREG_EM_OFFSET #ifdef CONFIG_FRAME_POINTER .macro save_fp diff --git a/include/asm-avr32/intc.h b/include/asm-avr32/intc.h deleted file mode 100644 index 1ac9ca7..0000000 --- a/include/asm-avr32/intc.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef __ASM_AVR32_INTC_H -#define __ASM_AVR32_INTC_H - -#include <linux/sysdev.h> -#include <linux/interrupt.h> - -struct irq_controller; -struct irqaction; -struct pt_regs; - -struct platform_device; - -/* Information about the internal interrupt controller */ -struct intc_device { - /* ioremapped address of configuration block */ - void __iomem *regs; - - /* the physical device */ - struct platform_device *pdev; - - /* Number of interrupt lines per group. */ - unsigned int irqs_per_group; - - /* The highest group ID + 1 */ - unsigned int nr_groups; - - /* - * Bitfield indicating which groups are actually in use. The - * size of the array is - * ceil(group_max / (8 * sizeof(unsigned int))). - */ - unsigned int group_mask[]; -}; - -struct irq_controller_class { - /* - * A short name identifying this kind of controller. - */ - const char *typename; - /* - * Handle the IRQ. Must do any necessary acking and masking. - */ - irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs); - /* - * Register a new IRQ handler. - */ - int (*setup)(struct irq_controller *ctrl, unsigned int irq, - struct irqaction *action); - /* - * Unregister a IRQ handler. - */ - void (*free)(struct irq_controller *ctrl, unsigned int irq, - void *dev_id); - /* - * Mask the IRQ in the interrupt controller. - */ - void (*mask)(struct irq_controller *ctrl, unsigned int irq); - /* - * Unmask the IRQ in the interrupt controller. - */ - void (*unmask)(struct irq_controller *ctrl, unsigned int irq); - /* - * Set the type of the IRQ. See below for possible types. - * Return -EINVAL if a given type is not supported - */ - int (*set_type)(struct irq_controller *ctrl, unsigned int irq, - unsigned int type); - /* - * Return the IRQ type currently set - */ - unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq); -}; - -struct irq_controller { - struct irq_controller_class *class; - unsigned int irq_group; - unsigned int first_irq; - unsigned int nr_irqs; - struct list_head list; -}; - -struct intc_group_desc { - struct irq_controller *ctrl; - irqreturn_t (*handle)(int, void *, struct pt_regs *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -/* - * The internal interrupt controller. Defined in board/part-specific - * devices.c. - * TODO: Should probably be defined per-cpu. - */ -extern struct intc_device intc; - -extern int request_internal_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char *devname, void *dev_id); -extern void free_internal_irq(unsigned int irq); - -/* Only used by time_init() */ -extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc); - -/* - * Set interrupt priority for a given group. `group' can be found by - * using irq_to_group(irq). Priority can be from 0 (lowest) to 3 - * (highest). Higher-priority interrupts will preempt lower-priority - * interrupts (unless interrupts are masked globally). - * - * This function does not check for conflicts within a group. - */ -extern int intc_set_priority(unsigned int group, - unsigned int priority); - -/* - * Returns a bitmask of pending interrupts in a group. - */ -extern unsigned long intc_get_pending(unsigned int group); - -/* - * Register a new external interrupt controller. Returns the first - * external IRQ number that is assigned to the new controller. - */ -extern int intc_register_controller(struct irq_controller *ctrl); - -#endif /* __ASM_AVR32_INTC_H */ diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h index 9315724..c563b77 100644 --- a/include/asm-avr32/irq.h +++ b/include/asm-avr32/irq.h @@ -14,6 +14,11 @@ #ifndef __ASSEMBLER__ int nmi_enable(void); void nmi_disable(void); + +/* + * Returns a bitmask of pending interrupts in a group. + */ +extern unsigned long intc_get_pending(unsigned int group); #endif #endif /* __ASM_AVR32_IOCTLS_H */ diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h index 5582968..cbbc5ca 100644 --- a/include/asm-avr32/page.h +++ b/include/asm-avr32/page.h @@ -8,13 +8,11 @@ #ifndef __ASM_AVR32_PAGE_H #define __ASM_AVR32_PAGE_H +#include <linux/const.h> + /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #define PTE_MASK PAGE_MASK diff --git a/include/asm-avr32/serial.h b/include/asm-avr32/serial.h new file mode 100644 index 0000000..5ecaebc --- /dev/null +++ b/include/asm-avr32/serial.h @@ -0,0 +1,13 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-avr32/xor.h b/include/asm-avr32/xor.h new file mode 100644 index 0000000..99c87aa --- /dev/null +++ b/include/asm-avr32/xor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_XOR_H +#define _ASM_XOR_H + +#include <asm-generic/xor.h> + +#endif diff --git a/include/asm-blackfin/.gitignore b/include/asm-blackfin/.gitignore new file mode 100644 index 0000000..7858564 --- /dev/null +++ b/include/asm-blackfin/.gitignore @@ -0,0 +1 @@ ++mach diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 5dba3a7..716df7c 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -112,20 +112,10 @@ extern void init_leds(void); extern const char bfin_board_name[]; extern unsigned long wall_jiffies; -extern unsigned long ipdt_table[]; -extern unsigned long dpdt_table[]; -extern unsigned long icplb_table[]; -extern unsigned long dcplb_table[]; - -extern unsigned long ipdt_swapcount_table[]; -extern unsigned long dpdt_swapcount_table[]; - -extern unsigned long table_start, table_end; extern unsigned long bfin_sic_iwr[]; extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern struct file_operations dpmc_fops; -extern char _start; extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], diff --git a/include/asm-blackfin/bug.h b/include/asm-blackfin/bug.h index 41e53b2..6d3e11b 100644 --- a/include/asm-blackfin/bug.h +++ b/include/asm-blackfin/bug.h @@ -1,4 +1,17 @@ #ifndef _BLACKFIN_BUG_H #define _BLACKFIN_BUG_H + +#ifdef CONFIG_BUG +#define HAVE_ARCH_BUG + +#define BUG() do { \ + dump_bfin_trace_buffer(); \ + printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + panic("BUG!"); \ +} while (0) + +#endif + #include <asm-generic/bug.h> + #endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 654375c..5b0da9a 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -74,32 +74,6 @@ #define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) -/* -* Number of required data CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 16 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Data Memory -* possibly 1 for L2 Data Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -* 1 for ASYNC Memory -*/ - - -#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 \ - + ASYNC_MEMORY_CPLB_COVERAGE) * 2) - -/* -* Number of required instruction CPLB switchtable entries -* MEMSIZE / 4 (we mostly install 4M page size CPLBs -* approx 12 for smaller 1MB page size CPLBs for allignment purposes -* 1 for L1 Instruction Memory -* possibly 1 for L2 Instruction Memory -* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO -*/ - -#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2) - - #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 #define CPLB_ENABLE_DCACHE2_P 2 diff --git a/include/asm-blackfin/dma-mapping.h b/include/asm-blackfin/dma-mapping.h index 282fabc..1a13c2f 100644 --- a/include/asm-blackfin/dma-mapping.h +++ b/include/asm-blackfin/dma-mapping.h @@ -27,6 +27,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction direction); +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + /* * Unmap a single streaming mode DMA translation. The dma_addr and size * must match what was provided for in a previous pci_map_single call. All @@ -38,6 +46,13 @@ extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction); +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_addr, size, dir); +} + /* * Map a set of buffers described by scatterlist in streaming * mode for DMA. This is the scather-gather version of the diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index 5abaa2c..c0d5259 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -33,7 +33,6 @@ #include <linux/slab.h> #include <asm/irq.h> #include <asm/signal.h> -#include <asm/semaphore.h> #include <linux/kernel.h> #include <asm/mach/dma.h> @@ -192,4 +191,7 @@ void clear_dma_irqstat(unsigned int channel); void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); +extern int channel2irq(unsigned int channel); +extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL]; + #endif diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h index 4f318f1..0520d2a 100644 --- a/include/asm-blackfin/gptimers.h +++ b/include/asm-blackfin/gptimers.h @@ -22,6 +22,18 @@ # define TIMER0_GROUP_REG TIMER_ENABLE #endif /* + * BF54x: 11 timers (BF542: 8 timers): + */ +#if defined(BF548_FAMILY) +# ifdef CONFIG_BF542 +# define MAX_BLACKFIN_GPTIMERS 8 +# else +# define MAX_BLACKFIN_GPTIMERS 11 +# define TIMER8_GROUP_REG TIMER_ENABLE1 +# endif +# define TIMER0_GROUP_REG TIMER_ENABLE0 +#endif +/* * BF561: 12 timers: */ #if defined(CONFIG_BF561) @@ -44,40 +56,28 @@ #define TIMER0bit 0x0001 /* 0001b */ #define TIMER1bit 0x0002 /* 0010b */ #define TIMER2bit 0x0004 /* 0100b */ - -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER3bit 0x0008 -# define TIMER4bit 0x0010 -# define TIMER5bit 0x0020 -# define TIMER6bit 0x0040 -# define TIMER7bit 0x0080 -#endif - -#if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER8bit 0x0100 -# define TIMER9bit 0x0200 -# define TIMER10bit 0x0400 -# define TIMER11bit 0x0800 -#endif +#define TIMER3bit 0x0008 +#define TIMER4bit 0x0010 +#define TIMER5bit 0x0020 +#define TIMER6bit 0x0040 +#define TIMER7bit 0x0080 +#define TIMER8bit 0x0100 +#define TIMER9bit 0x0200 +#define TIMER10bit 0x0400 +#define TIMER11bit 0x0800 #define TIMER0_id 0 #define TIMER1_id 1 #define TIMER2_id 2 - -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER3_id 3 -# define TIMER4_id 4 -# define TIMER5_id 5 -# define TIMER6_id 6 -# define TIMER7_id 7 -#endif - -#if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER8_id 8 -# define TIMER9_id 9 -# define TIMER10_id 10 -# define TIMER11_id 11 -#endif +#define TIMER3_id 3 +#define TIMER4_id 4 +#define TIMER5_id 5 +#define TIMER6_id 6 +#define TIMER7_id 7 +#define TIMER8_id 8 +#define TIMER9_id 9 +#define TIMER10_id 10 +#define TIMER11_id 11 /* associated timers for ppi framesync: */ @@ -124,45 +124,31 @@ /* * Timer Status Register Bits */ -#define TIMER_STATUS_TIMIL0 0x0001 -#define TIMER_STATUS_TIMIL1 0x0002 -#define TIMER_STATUS_TIMIL2 0x0004 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TIMIL3 0x00000008 -# define TIMER_STATUS_TIMIL4 0x00010000 -# define TIMER_STATUS_TIMIL5 0x00020000 -# define TIMER_STATUS_TIMIL6 0x00040000 -# define TIMER_STATUS_TIMIL7 0x00080000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TIMIL8 0x0001 -# define TIMER_STATUS_TIMIL9 0x0002 -# define TIMER_STATUS_TIMIL10 0x0004 -# define TIMER_STATUS_TIMIL11 0x0008 -# endif -# define TIMER_STATUS_INTR 0x000F000F -#else -# define TIMER_STATUS_INTR 0x0007 /* any timer interrupt */ -#endif - -#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ -#define TIMER_STATUS_TOVF1 0x0020 -#define TIMER_STATUS_TOVF2 0x0040 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TOVF3 0x00000080 -# define TIMER_STATUS_TOVF4 0x00100000 -# define TIMER_STATUS_TOVF5 0x00200000 -# define TIMER_STATUS_TOVF6 0x00400000 -# define TIMER_STATUS_TOVF7 0x00800000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TOVF8 0x0010 -# define TIMER_STATUS_TOVF9 0x0020 -# define TIMER_STATUS_TOVF10 0x0040 -# define TIMER_STATUS_TOVF11 0x0080 -# endif -# define TIMER_STATUS_OFLOW 0x00F000F0 -#else -# define TIMER_STATUS_OFLOW 0x0070 /* any timer overflow */ -#endif +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#define TIMER_STATUS_TIMIL3 0x00000008 +#define TIMER_STATUS_TIMIL4 0x00010000 +#define TIMER_STATUS_TIMIL5 0x00020000 +#define TIMER_STATUS_TIMIL6 0x00040000 +#define TIMER_STATUS_TIMIL7 0x00080000 +#define TIMER_STATUS_TIMIL8 0x0001 +#define TIMER_STATUS_TIMIL9 0x0002 +#define TIMER_STATUS_TIMIL10 0x0004 +#define TIMER_STATUS_TIMIL11 0x0008 + +#define TIMER_STATUS_TOVF0 0x0010 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0020 +#define TIMER_STATUS_TOVF2 0x0040 +#define TIMER_STATUS_TOVF3 0x00000080 +#define TIMER_STATUS_TOVF4 0x00100000 +#define TIMER_STATUS_TOVF5 0x00200000 +#define TIMER_STATUS_TOVF6 0x00400000 +#define TIMER_STATUS_TOVF7 0x00800000 +#define TIMER_STATUS_TOVF8 0x0010 +#define TIMER_STATUS_TOVF9 0x0020 +#define TIMER_STATUS_TOVF10 0x0040 +#define TIMER_STATUS_TOVF11 0x0080 /* * Timer Slave Enable Status : write 1 to clear @@ -170,22 +156,16 @@ #define TIMER_STATUS_TRUN0 0x1000 #define TIMER_STATUS_TRUN1 0x2000 #define TIMER_STATUS_TRUN2 0x4000 -#if (MAX_BLACKFIN_GPTIMERS > 3) -# define TIMER_STATUS_TRUN3 0x00008000 -# define TIMER_STATUS_TRUN4 0x10000000 -# define TIMER_STATUS_TRUN5 0x20000000 -# define TIMER_STATUS_TRUN6 0x40000000 -# define TIMER_STATUS_TRUN7 0x80000000 -# define TIMER_STATUS_TRUN 0xF000F000 -# if (MAX_BLACKFIN_GPTIMERS > 8) -# define TIMER_STATUS_TRUN8 0x1000 -# define TIMER_STATUS_TRUN9 0x2000 -# define TIMER_STATUS_TRUN10 0x4000 -# define TIMER_STATUS_TRUN11 0x8000 -# endif -#else -# define TIMER_STATUS_TRUN 0x7000 -#endif +#define TIMER_STATUS_TRUN3 0x00008000 +#define TIMER_STATUS_TRUN4 0x10000000 +#define TIMER_STATUS_TRUN5 0x20000000 +#define TIMER_STATUS_TRUN6 0x40000000 +#define TIMER_STATUS_TRUN7 0x80000000 +#define TIMER_STATUS_TRUN 0xF000F000 +#define TIMER_STATUS_TRUN8 0x1000 +#define TIMER_STATUS_TRUN9 0x2000 +#define TIMER_STATUS_TRUN10 0x4000 +#define TIMER_STATUS_TRUN11 0x8000 /* The actual gptimer API */ diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h index a891204..735fa02 100644 --- a/include/asm-blackfin/mach-bf527/anomaly.h +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -15,35 +15,85 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) -/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) -/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ -#define ANOMALY_05000301 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ #define ANOMALY_05000337 (1) -/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */ +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (1) +/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */ #define ANOMALY_05000342 (1) -/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ +/* USB Calibration Value Is Not Initialized */ +#define ANOMALY_05000346 (1) +/* Preboot Routine Incorrectly Alters Reset Value of USB Register */ #define ANOMALY_05000347 (1) +/* Security Features Are Not Functional */ +#define ANOMALY_05000348 (__SILICON_REVISION__ < 1) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000364 (__SILICON_REVISION__ > 0) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* New Feature: Higher Default CCLK Rate */ +#define ANOMALY_05000368 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* Authentication Fails To Initiate */ +#define ANOMALY_05000376 (__SILICON_REVISION__ > 0) +/* Data Read From L3 Memory by USB DMA May be Corrupted */ +#define ANOMALY_05000380 (1) +/* USB Full-speed Mode not Fully Tested */ +#define ANOMALY_05000381 (1) +/* New Feature: Boot from OTP Memory */ +#define ANOMALY_05000385 (1) +/* New Feature: bfrom_SysControl() Routine */ +#define ANOMALY_05000386 (1) +/* New Feature: Programmable Preboot Settings */ +#define ANOMALY_05000387 (1) +/* Reset Vector Must Not Be in SDRAM Memory Space */ +#define ANOMALY_05000389 (1) +/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */ +#define ANOMALY_05000392 (1) +/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */ +#define ANOMALY_05000393 (1) +/* New Feature: Log Buffer Functionality */ +#define ANOMALY_05000394 (1) +/* New Feature: Hook Routine Functionality */ +#define ANOMALY_05000395 (1) +/* New Feature: Header Indirect Bit */ +#define ANOMALY_05000396 (1) +/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */ +#define ANOMALY_05000397 (1) +/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */ +#define ANOMALY_05000398 (1) +/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */ +#define ANOMALY_05000399 (1) +/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */ +#define ANOMALY_05000401 (1) /* Anomalies that don't exist on this proc */ -#define ANOMALY_05000323 (0) -#define ANOMALY_05000244 (0) -#define ANOMALY_05000198 (0) #define ANOMALY_05000125 (0) #define ANOMALY_05000158 (0) -#define ANOMALY_05000273 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) -#define ANOMALY_05000230 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) + #endif diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index c0694ec..f0ab273 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 2 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -92,7 +108,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/include/asm-blackfin/mach-bf527/bfin_sir.h new file mode 100644 index 0000000..0612d0c --- /dev/null +++ b/include/asm-blackfin/mach-bf527/bfin_sir.h @@ -0,0 +1,133 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/include/asm-blackfin/mach-bf527/blackfin.h index 1bd07e3..2891727 100644 --- a/include/asm-blackfin/mach-bf527/blackfin.h +++ b/include/asm-blackfin/mach-bf527/blackfin.h @@ -64,6 +64,21 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() #define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val) diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h index 3f4de5d..9dbdbec 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h +++ b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h @@ -29,18 +29,71 @@ */ #ifndef _CDEF_BF52X_H +#define _CDEF_BF52X_H + +#include <asm/system.h> +#include <asm/blackfin.h> #include "defBF52x_base.h" +/* Include core specific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + /* ==== begin from cdefBF534.h ==== */ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) -#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +/* Writing to VR_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_VR_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + + bfin_write16(VR_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -873,39 +926,6 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) - /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define bfin_read_PORTGIO() bfin_read16(PORTGIO) diff --git a/include/asm-blackfin/mach-bf527/dma.h b/include/asm-blackfin/mach-bf527/dma.h index 2dfee12..49dd693 100644 --- a/include/asm-blackfin/mach-bf527/dma.h +++ b/include/asm-blackfin/mach-bf527/dma.h @@ -59,7 +59,4 @@ #define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */ #endif -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 98209d4..5a6dcc5 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -251,10 +251,18 @@ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ == 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ == 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index b6f513b..fbe88de 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 1 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -84,7 +100,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -115,7 +131,7 @@ struct bfin_serial_res bfin_serial_resource[] = { #define DRIVER_NAME "bfin-uart" -int nr_ports = NR_PORTS; +int nr_ports = BFIN_UART_NR_PORTS; static void bfin_serial_hw_init(struct bfin_serial_port *uart) { diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h new file mode 100644 index 0000000..cefcf8b --- /dev/null +++ b/include/asm-blackfin/mach-bf533/bfin_sir.h @@ -0,0 +1,120 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h index f3b240ab..d80971b 100644 --- a/include/asm-blackfin/mach-bf533/blackfin.h +++ b/include/asm-blackfin/mach-bf533/blackfin.h @@ -42,4 +42,19 @@ #include "cdefBF532.h" #endif +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ + #endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h index c803e14..1546554 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -43,7 +43,27 @@ /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) @@ -57,6 +77,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ @@ -64,11 +88,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); } /* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 37134aa..17e1548 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -88,20 +88,25 @@ #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ #if 0 -#define UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ #endif -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h index 16c672c..bd9d5e9 100644 --- a/include/asm-blackfin/mach-bf533/dma.h +++ b/include/asm-blackfin/mach-bf533/dma.h @@ -51,7 +51,4 @@ #define CH_MEM_STREAM1_DEST 10 /* TX */ #define CH_MEM_STREAM1_SRC 11 /* RX */ -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h index 1620dae..f8f3190 100644 --- a/include/asm-blackfin/mach-bf533/mem_init.h +++ b/include/asm-blackfin/mach-bf533/mem_init.h @@ -29,7 +29,8 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD) +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) #if (CONFIG_SCLK_HZ > 119402985) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 @@ -118,6 +119,13 @@ #define SDRAM_CL CL_3 #endif +#if (CONFIG_MEM_MT48LC32M16A2TG_75) + /*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + #if (CONFIG_MEM_GENERIC_BOARD) /*SDRAM INFORMATION: Modify this for your board */ #define SDRAM_Tref 64 /* Refresh period in milliseconds */ diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 746a794..a6b08fa 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -132,10 +132,24 @@ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) +/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */ +#define ANOMALY_05000350 (__SILICON_REVISION__ < 3) +/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ +#define ANOMALY_05000355 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ #define ANOMALY_05000357 (1) /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ #define ANOMALY_05000359 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + + /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -146,5 +160,6 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 8fc672d..fd100a4 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf537/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver header files + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 2 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -92,7 +108,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/include/asm-blackfin/mach-bf537/bfin_sir.h new file mode 100644 index 0000000..0612d0c --- /dev/null +++ b/include/asm-blackfin/mach-bf537/bfin_sir.h @@ -0,0 +1,133 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h index 53fcfa3..cffc786 100644 --- a/include/asm-blackfin/mach-bf537/blackfin.h +++ b/include/asm-blackfin/mach-bf537/blackfin.h @@ -82,8 +82,6 @@ #define STATUS_P1 0x02 #define STATUS_P0 0x01 -/* UART 0*/ - /* DMA Channnel */ #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX() #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val) @@ -106,37 +104,52 @@ /* MMR Registers*/ #define bfin_read_UART_THR() bfin_read_UART0_THR() #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val) -#define UART_THR UART0_THR +#define BFIN_UART_THR UART0_THR #define bfin_read_UART_RBR() bfin_read_UART0_RBR() #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val) -#define UART_RBR UART0_RBR +#define BFIN_UART_RBR UART0_RBR #define bfin_read_UART_DLL() bfin_read_UART0_DLL() #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val) -#define UART_DLL UART0_DLL +#define BFIN_UART_DLL UART0_DLL #define bfin_read_UART_IER() bfin_read_UART0_IER() #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val) -#define UART_IER UART0_IER +#define BFIN_UART_IER UART0_IER #define bfin_read_UART_DLH() bfin_read_UART0_DLH() #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val) -#define UART_DLH UART0_DLH +#define BFIN_UART_DLH UART0_DLH #define bfin_read_UART_IIR() bfin_read_UART0_IIR() #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val) -#define UART_IIR UART0_IIR +#define BFIN_UART_IIR UART0_IIR #define bfin_read_UART_LCR() bfin_read_UART0_LCR() #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val) -#define UART_LCR UART0_LCR +#define BFIN_UART_LCR UART0_LCR #define bfin_read_UART_MCR() bfin_read_UART0_MCR() #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val) -#define UART_MCR UART0_MCR +#define BFIN_UART_MCR UART0_MCR #define bfin_read_UART_LSR() bfin_read_UART0_LSR() #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val) -#define UART_LSR UART0_LSR +#define BFIN_UART_LSR UART0_LSR #define bfin_read_UART_SCR() bfin_read_UART0_SCR() #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val) -#define UART_SCR UART0_SCR +#define BFIN_UART_SCR UART0_SCR #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val) -#define UART_GCTL UART0_GCTL +#define BFIN_UART_GCTL UART0_GCTL + +#define BFIN_UART_NR_PORTS 2 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ /* DPMC*/ #define bfin_read_STOPCK_OFF() bfin_read_STOPCK() diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h index 78227bc..82de526 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -44,7 +44,27 @@ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr = bfin_read32(SIC_IWR); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -53,6 +73,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ @@ -60,11 +84,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR, iwr); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) @@ -858,39 +881,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) #define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) -/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV,val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL,val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL,val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT,val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR,val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL,val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT,val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR,val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT,val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK,val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL,val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT,val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8,val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16,val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8,val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16,val) +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ #define bfin_read_PORTGIO() bfin_read16(PORTGIO) diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h index 0219919..7a96404 100644 --- a/include/asm-blackfin/mach-bf537/dma.h +++ b/include/asm-blackfin/mach-bf537/dma.h @@ -52,7 +52,4 @@ #define CH_MEM_STREAM1_DEST 14 /* TX */ #define CH_MEM_STREAM1_SRC 15 /* RX */ -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 850dc12..49d3ceb 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -93,5 +93,6 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) +#define ANOMALY_05000363 (0) #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 7e6339f..6547027 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf548/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 4 - -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_GCTL 0x08 /* Global Control Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ -#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ -#define OFFSET_THR 0x28 /* Transmit Holding register */ -#define OFFSET_RBR 0x2C /* Receive Buffer register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) @@ -80,7 +96,7 @@ struct bfin_serial_port { #endif }; -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/include/asm-blackfin/mach-bf548/bfin_sir.h new file mode 100644 index 0000000..5e94271 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/bfin_sir.h @@ -0,0 +1,149 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v) +#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART0_RX, + CH_UART0_RX, + CH_UART0_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + 0xFFC02000, + IRQ_UART1_RX, + CH_UART1_RX, + CH_UART1_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR2 + { + 0xFFC02100, + IRQ_UART2_RX, + CH_UART2_RX, + CH_UART2_TX, + }, +#endif +#ifdef CONFIG_BFIN_SIR3 + { + 0xFFC03100, + IRQ_UART3_RX, + CH_UART3_RX, + CH_UART3_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR1 + peripheral_request(P_UART1_TX, DRIVER_NAME); + peripheral_request(P_UART1_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR2 + peripheral_request(P_UART2_TX, DRIVER_NAME); + peripheral_request(P_UART2_RX, DRIVER_NAME); +#endif + +#ifdef CONFIG_BFIN_SIR3 + peripheral_request(P_UART3_TX, DRIVER_NAME); + peripheral_request(P_UART3_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h index 3bd67da..d6ee74a 100644 --- a/include/asm-blackfin/mach-bf548/blackfin.h +++ b/include/asm-blackfin/mach-bf548/blackfin.h @@ -153,17 +153,33 @@ #define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val) #define bfin_read_UART_GCTL() bfin_read_UART1_GCTL() #define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val) -#define UART_THR UART1_THR -#define UART_RBR UART1_RBR -#define UART_DLL UART1_DLL -#define UART_IER UART1_IER -#define UART_DLH UART1_DLH -#define UART_IIR UART1_IIR -#define UART_LCR UART1_LCR -#define UART_MCR UART1_MCR -#define UART_LSR UART1_LSR -#define UART_SCR UART1_SCR -#define UART_GCTL UART1_GCTL + +#define BFIN_UART_THR UART1_THR +#define BFIN_UART_RBR UART1_RBR +#define BFIN_UART_DLL UART1_DLL +#define BFIN_UART_IER UART1_IER +#define BFIN_UART_DLH UART1_DLH +#define BFIN_UART_IIR UART1_IIR +#define BFIN_UART_LCR UART1_LCR +#define BFIN_UART_MCR UART1_MCR +#define BFIN_UART_LSR UART1_LSR +#define BFIN_UART_SCR UART1_SCR +#define BFIN_UART_GCTL UART1_GCTL + +#define BFIN_UART_NR_PORTS 4 + +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_GCTL 0x08 /* Global Control Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */ +#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */ +#define OFFSET_THR 0x28 /* Transmit Holding register */ +#define OFFSET_RBR 0x2C /* Receive Buffer register */ /* PLL_DIV Masks */ #define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/include/asm-blackfin/mach-bf548/cdefBF542.h index 308b33a..60b9f77 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF542.h +++ b/include/asm-blackfin/mach-bf548/cdefBF542.h @@ -123,12 +123,12 @@ #define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) #define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) #define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) -#define bfin_read_SDH_DATA_CNT() fin_read16(SDH_DATA_CNT) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) #define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) #define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) #define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) -#define bfin_read_SDH_STATUS_CLR() fin_read16(SDH_STATUS_CLR) -#define bfin_write_SDH_STATUS_CLR(val) fin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) #define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) #define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) #define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) @@ -184,8 +184,8 @@ #define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) #define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) #define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() fin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) fin_write16(USB_TESTMODE, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) #define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) #define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) #define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) @@ -244,7 +244,7 @@ #define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) #define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) #define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) fin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) #define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) #define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/include/asm-blackfin/mach-bf548/cdefBF544.h index 7a2d177..ea9b4ab 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF544.h +++ b/include/asm-blackfin/mach-bf548/cdefBF544.h @@ -113,39 +113,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* CAN Controller 1 Config 1 Registers */ #define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/include/asm-blackfin/mach-bf548/cdefBF547.h index d0a200b..ba71627 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF547.h +++ b/include/asm-blackfin/mach-bf548/cdefBF547.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/include/asm-blackfin/mach-bf548/cdefBF548.h index 674be02..ae971eb 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF548.h +++ b/include/asm-blackfin/mach-bf548/cdefBF548.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/include/asm-blackfin/mach-bf548/cdefBF549.h index 2ab5b7c..92d07d9 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF549.h +++ b/include/asm-blackfin/mach-bf548/cdefBF549.h @@ -185,39 +185,6 @@ /* Two Wire Interface Registers (TWI1) */ -#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) -#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) -#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) -#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) -#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) -#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) -#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) -#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) -#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) -#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) -#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) -#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) -#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) -#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) -#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) -#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) -#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) -#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) -#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) -#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) -#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) -#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) -#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) -#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) -#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) -#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) -#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) -#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) -#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) -#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) -#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) -#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) - /* SPI2 Registers */ #define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) @@ -1773,7 +1740,7 @@ #define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) #define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) #define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) -#define bfin_write_USB_DMA5COUNTLOW(val) fin_write16(USB_DMA5COUNTLOW, val) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) #define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) #define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index 19ddcd8..57ac8cb 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -43,7 +43,33 @@ /* PLL Registers */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1, iwr2; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SIC_IWR0); + iwr1 = bfin_read32(SIC_IWR1); + iwr2 = bfin_read32(SIC_IWR2); + /* Only allow PPL Wakeup) */ + bfin_write32(SIC_IWR0, IWR_ENABLE(0)); + bfin_write32(SIC_IWR1, 0); + bfin_write32(SIC_IWR2, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SIC_IWR0, iwr0); + bfin_write32(SIC_IWR1, iwr1); + bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -52,6 +78,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr0, iwr1, iwr2; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr0 = bfin_read32(SIC_IWR0); iwr1 = bfin_read32(SIC_IWR1); @@ -63,13 +93,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SIC_IWR0, iwr0); bfin_write32(SIC_IWR1, iwr1); bfin_write32(SIC_IWR2, iwr2); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) @@ -211,39 +240,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* Two Wire Interface Registers (TWI0) */ -#define bfin_read_TWI0_CLKDIV() bfin_read16(TWI0_CLKDIV) -#define bfin_write_TWI0_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) -#define bfin_read_TWI0_CONTROL() bfin_read16(TWI0_CONTROL) -#define bfin_write_TWI0_CONTROL(val) bfin_write16(TWI0_CONTROL, val) -#define bfin_read_TWI0_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) -#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) -#define bfin_read_TWI0_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) -#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) -#define bfin_read_TWI0_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) -#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) -#define bfin_read_TWI0_MASTER_CTRL() bfin_read16(TWI0_MASTER_CTRL) -#define bfin_write_TWI0_MASTER_CTRL(val) bfin_write16(TWI0_MASTER_CTRL, val) -#define bfin_read_TWI0_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) -#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) -#define bfin_read_TWI0_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) -#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) -#define bfin_read_TWI0_INT_STAT() bfin_read16(TWI0_INT_STAT) -#define bfin_write_TWI0_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) -#define bfin_read_TWI0_INT_MASK() bfin_read16(TWI0_INT_MASK) -#define bfin_write_TWI0_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) -#define bfin_read_TWI0_FIFO_CTRL() bfin_read16(TWI0_FIFO_CTRL) -#define bfin_write_TWI0_FIFO_CTRL(val) bfin_write16(TWI0_FIFO_CTRL, val) -#define bfin_read_TWI0_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) -#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) -#define bfin_read_TWI0_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) -#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) -#define bfin_read_TWI0_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) -#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) -#define bfin_read_TWI0_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) -#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) -#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) -#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) - /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ /* SPORT1 Registers */ @@ -323,7 +319,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_EBIU_DDRQUE() bfin_read32(EBIU_DDRQUE) #define bfin_write_EBIU_DDRQUE(val) bfin_write32(EBIU_DDRQUE, val) #define bfin_read_EBIU_ERRADD() bfin_read32(EBIU_ERRADD) -#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD) +#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD, val) #define bfin_read_EBIU_ERRMST() bfin_read16(EBIU_ERRMST) #define bfin_write_EBIU_ERRMST(val) bfin_write16(EBIU_ERRMST, val) #define bfin_read_EBIU_RSTCTL() bfin_read16(EBIU_RSTCTL) @@ -392,23 +388,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 0 Registers */ #define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) -#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) #define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) -#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) #define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) #define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) #define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) -#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) #define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) #define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) #define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) -#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) #define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) -#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) #define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) -#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) #define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) #define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) #define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) @@ -421,23 +417,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 1 Registers */ #define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) -#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) #define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) -#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) #define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) #define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) #define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) #define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) #define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) -#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) #define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) #define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) #define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) -#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) #define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) -#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) #define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) -#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) #define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) #define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) #define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) @@ -450,23 +446,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 2 Registers */ #define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) -#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) #define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) -#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) #define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) #define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) #define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) #define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) #define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) -#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) #define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) #define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) #define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) -#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) #define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) -#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) #define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) -#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) #define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) #define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) #define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) @@ -479,23 +475,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 3 Registers */ #define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) -#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) #define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) -#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) #define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) #define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) #define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) #define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) #define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) -#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) #define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) #define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) #define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) -#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) #define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) -#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) #define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) -#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) #define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) #define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) #define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) @@ -508,23 +504,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 4 Registers */ #define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) -#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) #define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) -#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) #define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) #define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) #define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) #define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) #define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) -#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) #define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) #define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) #define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) -#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) #define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) -#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) #define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) -#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) #define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) #define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) #define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) @@ -537,23 +533,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 5 Registers */ #define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) -#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) #define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) -#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) #define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) #define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) #define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) #define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) #define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) -#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) #define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) #define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) #define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) -#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) #define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) -#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) #define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) -#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) #define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) #define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) #define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) @@ -566,23 +562,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 6 Registers */ #define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) -#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) #define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) -#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) #define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) #define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) #define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) #define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) #define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) -#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) #define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) #define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) #define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) -#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) #define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) -#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) #define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) -#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) #define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) #define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) #define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) @@ -595,23 +591,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 7 Registers */ #define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) -#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) #define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) -#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) #define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) #define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) #define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) #define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) #define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) -#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) #define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) #define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) #define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) -#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) #define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) -#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) #define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) -#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) #define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) #define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) #define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) @@ -624,23 +620,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 8 Registers */ #define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) -#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) #define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) -#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) #define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) #define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) #define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) #define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) #define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) -#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) #define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) #define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) #define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) -#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) #define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) -#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) #define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) -#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) #define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) #define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) #define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) @@ -653,23 +649,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 9 Registers */ #define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) -#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) #define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) -#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) #define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) #define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) #define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) #define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) #define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) -#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) #define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) #define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) #define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) -#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) #define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) -#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) #define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) -#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) #define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) #define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) #define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) @@ -682,23 +678,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 10 Registers */ #define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) -#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) #define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) -#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) #define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) #define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) #define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) #define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) #define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) -#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) #define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) #define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) #define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) -#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) #define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) -#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) #define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) -#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) #define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) #define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) #define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) @@ -711,23 +707,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 11 Registers */ #define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) -#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) #define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) -#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) #define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) #define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) #define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) #define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) #define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) -#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) #define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) #define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) #define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) -#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) #define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) -#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) #define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) -#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) #define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) #define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) #define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) @@ -740,7 +736,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 0 Registers */ #define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) -#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) #define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) #define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) @@ -803,11 +799,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) #define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) #define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) -#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) #define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) #define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) #define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) -#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) #define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) #define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) #define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) @@ -829,11 +825,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) #define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) #define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) -#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) #define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) #define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) #define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) -#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) #define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) #define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) #define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) @@ -1246,23 +1242,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 12 Registers */ #define bfin_read_DMA12_NEXT_DESC_PTR() bfin_read32(DMA12_NEXT_DESC_PTR) -#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR, val) #define bfin_read_DMA12_START_ADDR() bfin_read32(DMA12_START_ADDR) -#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR, val) #define bfin_read_DMA12_CONFIG() bfin_read16(DMA12_CONFIG) #define bfin_write_DMA12_CONFIG(val) bfin_write16(DMA12_CONFIG, val) #define bfin_read_DMA12_X_COUNT() bfin_read16(DMA12_X_COUNT) #define bfin_write_DMA12_X_COUNT(val) bfin_write16(DMA12_X_COUNT, val) #define bfin_read_DMA12_X_MODIFY() bfin_read16(DMA12_X_MODIFY) -#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY, val) #define bfin_read_DMA12_Y_COUNT() bfin_read16(DMA12_Y_COUNT) #define bfin_write_DMA12_Y_COUNT(val) bfin_write16(DMA12_Y_COUNT, val) #define bfin_read_DMA12_Y_MODIFY() bfin_read16(DMA12_Y_MODIFY) -#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY, val) #define bfin_read_DMA12_CURR_DESC_PTR() bfin_read32(DMA12_CURR_DESC_PTR) -#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR, val) #define bfin_read_DMA12_CURR_ADDR() bfin_read32(DMA12_CURR_ADDR) -#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR, val) #define bfin_read_DMA12_IRQ_STATUS() bfin_read16(DMA12_IRQ_STATUS) #define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val) #define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP) @@ -1275,23 +1271,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 13 Registers */ #define bfin_read_DMA13_NEXT_DESC_PTR() bfin_read32(DMA13_NEXT_DESC_PTR) -#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR, val) #define bfin_read_DMA13_START_ADDR() bfin_read32(DMA13_START_ADDR) -#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR, val) #define bfin_read_DMA13_CONFIG() bfin_read16(DMA13_CONFIG) #define bfin_write_DMA13_CONFIG(val) bfin_write16(DMA13_CONFIG, val) #define bfin_read_DMA13_X_COUNT() bfin_read16(DMA13_X_COUNT) #define bfin_write_DMA13_X_COUNT(val) bfin_write16(DMA13_X_COUNT, val) #define bfin_read_DMA13_X_MODIFY() bfin_read16(DMA13_X_MODIFY) -#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY, val) #define bfin_read_DMA13_Y_COUNT() bfin_read16(DMA13_Y_COUNT) #define bfin_write_DMA13_Y_COUNT(val) bfin_write16(DMA13_Y_COUNT, val) #define bfin_read_DMA13_Y_MODIFY() bfin_read16(DMA13_Y_MODIFY) -#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY, val) #define bfin_read_DMA13_CURR_DESC_PTR() bfin_read32(DMA13_CURR_DESC_PTR) -#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR, val) #define bfin_read_DMA13_CURR_ADDR() bfin_read32(DMA13_CURR_ADDR) -#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR, val) #define bfin_read_DMA13_IRQ_STATUS() bfin_read16(DMA13_IRQ_STATUS) #define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val) #define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP) @@ -1304,23 +1300,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 14 Registers */ #define bfin_read_DMA14_NEXT_DESC_PTR() bfin_read32(DMA14_NEXT_DESC_PTR) -#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR, val) #define bfin_read_DMA14_START_ADDR() bfin_read32(DMA14_START_ADDR) -#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR, val) #define bfin_read_DMA14_CONFIG() bfin_read16(DMA14_CONFIG) #define bfin_write_DMA14_CONFIG(val) bfin_write16(DMA14_CONFIG, val) #define bfin_read_DMA14_X_COUNT() bfin_read16(DMA14_X_COUNT) #define bfin_write_DMA14_X_COUNT(val) bfin_write16(DMA14_X_COUNT, val) #define bfin_read_DMA14_X_MODIFY() bfin_read16(DMA14_X_MODIFY) -#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY, val) #define bfin_read_DMA14_Y_COUNT() bfin_read16(DMA14_Y_COUNT) #define bfin_write_DMA14_Y_COUNT(val) bfin_write16(DMA14_Y_COUNT, val) #define bfin_read_DMA14_Y_MODIFY() bfin_read16(DMA14_Y_MODIFY) -#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY, val) #define bfin_read_DMA14_CURR_DESC_PTR() bfin_read32(DMA14_CURR_DESC_PTR) -#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR, val) #define bfin_read_DMA14_CURR_ADDR() bfin_read32(DMA14_CURR_ADDR) -#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR, val) #define bfin_read_DMA14_IRQ_STATUS() bfin_read16(DMA14_IRQ_STATUS) #define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val) #define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP) @@ -1333,23 +1329,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 15 Registers */ #define bfin_read_DMA15_NEXT_DESC_PTR() bfin_read32(DMA15_NEXT_DESC_PTR) -#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR, val) #define bfin_read_DMA15_START_ADDR() bfin_read32(DMA15_START_ADDR) -#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR, val) #define bfin_read_DMA15_CONFIG() bfin_read16(DMA15_CONFIG) #define bfin_write_DMA15_CONFIG(val) bfin_write16(DMA15_CONFIG, val) #define bfin_read_DMA15_X_COUNT() bfin_read16(DMA15_X_COUNT) #define bfin_write_DMA15_X_COUNT(val) bfin_write16(DMA15_X_COUNT, val) #define bfin_read_DMA15_X_MODIFY() bfin_read16(DMA15_X_MODIFY) -#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY, val) #define bfin_read_DMA15_Y_COUNT() bfin_read16(DMA15_Y_COUNT) #define bfin_write_DMA15_Y_COUNT(val) bfin_write16(DMA15_Y_COUNT, val) #define bfin_read_DMA15_Y_MODIFY() bfin_read16(DMA15_Y_MODIFY) -#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY, val) #define bfin_read_DMA15_CURR_DESC_PTR() bfin_read32(DMA15_CURR_DESC_PTR) -#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR, val) #define bfin_read_DMA15_CURR_ADDR() bfin_read32(DMA15_CURR_ADDR) -#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR, val) #define bfin_read_DMA15_IRQ_STATUS() bfin_read16(DMA15_IRQ_STATUS) #define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val) #define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP) @@ -1362,23 +1358,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 16 Registers */ #define bfin_read_DMA16_NEXT_DESC_PTR() bfin_read32(DMA16_NEXT_DESC_PTR) -#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR, val) #define bfin_read_DMA16_START_ADDR() bfin_read32(DMA16_START_ADDR) -#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR, val) #define bfin_read_DMA16_CONFIG() bfin_read16(DMA16_CONFIG) #define bfin_write_DMA16_CONFIG(val) bfin_write16(DMA16_CONFIG, val) #define bfin_read_DMA16_X_COUNT() bfin_read16(DMA16_X_COUNT) #define bfin_write_DMA16_X_COUNT(val) bfin_write16(DMA16_X_COUNT, val) #define bfin_read_DMA16_X_MODIFY() bfin_read16(DMA16_X_MODIFY) -#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY, val) #define bfin_read_DMA16_Y_COUNT() bfin_read16(DMA16_Y_COUNT) #define bfin_write_DMA16_Y_COUNT(val) bfin_write16(DMA16_Y_COUNT, val) #define bfin_read_DMA16_Y_MODIFY() bfin_read16(DMA16_Y_MODIFY) -#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY, val) #define bfin_read_DMA16_CURR_DESC_PTR() bfin_read32(DMA16_CURR_DESC_PTR) -#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR, val) #define bfin_read_DMA16_CURR_ADDR() bfin_read32(DMA16_CURR_ADDR) -#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR, val) #define bfin_read_DMA16_IRQ_STATUS() bfin_read16(DMA16_IRQ_STATUS) #define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val) #define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP) @@ -1391,23 +1387,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 17 Registers */ #define bfin_read_DMA17_NEXT_DESC_PTR() bfin_read32(DMA17_NEXT_DESC_PTR) -#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR, val) #define bfin_read_DMA17_START_ADDR() bfin_read32(DMA17_START_ADDR) -#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR, val) #define bfin_read_DMA17_CONFIG() bfin_read16(DMA17_CONFIG) #define bfin_write_DMA17_CONFIG(val) bfin_write16(DMA17_CONFIG, val) #define bfin_read_DMA17_X_COUNT() bfin_read16(DMA17_X_COUNT) #define bfin_write_DMA17_X_COUNT(val) bfin_write16(DMA17_X_COUNT, val) #define bfin_read_DMA17_X_MODIFY() bfin_read16(DMA17_X_MODIFY) -#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY, val) #define bfin_read_DMA17_Y_COUNT() bfin_read16(DMA17_Y_COUNT) #define bfin_write_DMA17_Y_COUNT(val) bfin_write16(DMA17_Y_COUNT, val) #define bfin_read_DMA17_Y_MODIFY() bfin_read16(DMA17_Y_MODIFY) -#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY, val) #define bfin_read_DMA17_CURR_DESC_PTR() bfin_read32(DMA17_CURR_DESC_PTR) -#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR, val) #define bfin_read_DMA17_CURR_ADDR() bfin_read32(DMA17_CURR_ADDR) -#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR, val) #define bfin_read_DMA17_IRQ_STATUS() bfin_read16(DMA17_IRQ_STATUS) #define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val) #define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP) @@ -1420,23 +1416,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 18 Registers */ #define bfin_read_DMA18_NEXT_DESC_PTR() bfin_read32(DMA18_NEXT_DESC_PTR) -#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR, val) #define bfin_read_DMA18_START_ADDR() bfin_read32(DMA18_START_ADDR) -#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR, val) #define bfin_read_DMA18_CONFIG() bfin_read16(DMA18_CONFIG) #define bfin_write_DMA18_CONFIG(val) bfin_write16(DMA18_CONFIG, val) #define bfin_read_DMA18_X_COUNT() bfin_read16(DMA18_X_COUNT) #define bfin_write_DMA18_X_COUNT(val) bfin_write16(DMA18_X_COUNT, val) #define bfin_read_DMA18_X_MODIFY() bfin_read16(DMA18_X_MODIFY) -#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY, val) #define bfin_read_DMA18_Y_COUNT() bfin_read16(DMA18_Y_COUNT) #define bfin_write_DMA18_Y_COUNT(val) bfin_write16(DMA18_Y_COUNT, val) #define bfin_read_DMA18_Y_MODIFY() bfin_read16(DMA18_Y_MODIFY) -#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY, val) #define bfin_read_DMA18_CURR_DESC_PTR() bfin_read32(DMA18_CURR_DESC_PTR) -#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR, val) #define bfin_read_DMA18_CURR_ADDR() bfin_read32(DMA18_CURR_ADDR) -#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR, val) #define bfin_read_DMA18_IRQ_STATUS() bfin_read16(DMA18_IRQ_STATUS) #define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val) #define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP) @@ -1449,23 +1445,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 19 Registers */ #define bfin_read_DMA19_NEXT_DESC_PTR() bfin_read32(DMA19_NEXT_DESC_PTR) -#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR, val) #define bfin_read_DMA19_START_ADDR() bfin_read32(DMA19_START_ADDR) -#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR, val) #define bfin_read_DMA19_CONFIG() bfin_read16(DMA19_CONFIG) #define bfin_write_DMA19_CONFIG(val) bfin_write16(DMA19_CONFIG, val) #define bfin_read_DMA19_X_COUNT() bfin_read16(DMA19_X_COUNT) #define bfin_write_DMA19_X_COUNT(val) bfin_write16(DMA19_X_COUNT, val) #define bfin_read_DMA19_X_MODIFY() bfin_read16(DMA19_X_MODIFY) -#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY, val) #define bfin_read_DMA19_Y_COUNT() bfin_read16(DMA19_Y_COUNT) #define bfin_write_DMA19_Y_COUNT(val) bfin_write16(DMA19_Y_COUNT, val) #define bfin_read_DMA19_Y_MODIFY() bfin_read16(DMA19_Y_MODIFY) -#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY, val) #define bfin_read_DMA19_CURR_DESC_PTR() bfin_read32(DMA19_CURR_DESC_PTR) -#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR, val) #define bfin_read_DMA19_CURR_ADDR() bfin_read32(DMA19_CURR_ADDR) -#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR, val) #define bfin_read_DMA19_IRQ_STATUS() bfin_read16(DMA19_IRQ_STATUS) #define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val) #define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP) @@ -1478,23 +1474,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 20 Registers */ #define bfin_read_DMA20_NEXT_DESC_PTR() bfin_read32(DMA20_NEXT_DESC_PTR) -#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR) +#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR, val) #define bfin_read_DMA20_START_ADDR() bfin_read32(DMA20_START_ADDR) -#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR) +#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR, val) #define bfin_read_DMA20_CONFIG() bfin_read16(DMA20_CONFIG) #define bfin_write_DMA20_CONFIG(val) bfin_write16(DMA20_CONFIG, val) #define bfin_read_DMA20_X_COUNT() bfin_read16(DMA20_X_COUNT) #define bfin_write_DMA20_X_COUNT(val) bfin_write16(DMA20_X_COUNT, val) #define bfin_read_DMA20_X_MODIFY() bfin_read16(DMA20_X_MODIFY) -#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY) +#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY, val) #define bfin_read_DMA20_Y_COUNT() bfin_read16(DMA20_Y_COUNT) #define bfin_write_DMA20_Y_COUNT(val) bfin_write16(DMA20_Y_COUNT, val) #define bfin_read_DMA20_Y_MODIFY() bfin_read16(DMA20_Y_MODIFY) -#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY) +#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY, val) #define bfin_read_DMA20_CURR_DESC_PTR() bfin_read32(DMA20_CURR_DESC_PTR) -#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR) +#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR, val) #define bfin_read_DMA20_CURR_ADDR() bfin_read32(DMA20_CURR_ADDR) -#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR) +#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR, val) #define bfin_read_DMA20_IRQ_STATUS() bfin_read16(DMA20_IRQ_STATUS) #define bfin_write_DMA20_IRQ_STATUS(val) bfin_write16(DMA20_IRQ_STATUS, val) #define bfin_read_DMA20_PERIPHERAL_MAP() bfin_read16(DMA20_PERIPHERAL_MAP) @@ -1507,23 +1503,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 21 Registers */ #define bfin_read_DMA21_NEXT_DESC_PTR() bfin_read32(DMA21_NEXT_DESC_PTR) -#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR) +#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR, val) #define bfin_read_DMA21_START_ADDR() bfin_read32(DMA21_START_ADDR) -#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR) +#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR, val) #define bfin_read_DMA21_CONFIG() bfin_read16(DMA21_CONFIG) #define bfin_write_DMA21_CONFIG(val) bfin_write16(DMA21_CONFIG, val) #define bfin_read_DMA21_X_COUNT() bfin_read16(DMA21_X_COUNT) #define bfin_write_DMA21_X_COUNT(val) bfin_write16(DMA21_X_COUNT, val) #define bfin_read_DMA21_X_MODIFY() bfin_read16(DMA21_X_MODIFY) -#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY) +#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY, val) #define bfin_read_DMA21_Y_COUNT() bfin_read16(DMA21_Y_COUNT) #define bfin_write_DMA21_Y_COUNT(val) bfin_write16(DMA21_Y_COUNT, val) #define bfin_read_DMA21_Y_MODIFY() bfin_read16(DMA21_Y_MODIFY) -#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY) +#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY, val) #define bfin_read_DMA21_CURR_DESC_PTR() bfin_read32(DMA21_CURR_DESC_PTR) -#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR) +#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR, val) #define bfin_read_DMA21_CURR_ADDR() bfin_read32(DMA21_CURR_ADDR) -#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR) +#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR, val) #define bfin_read_DMA21_IRQ_STATUS() bfin_read16(DMA21_IRQ_STATUS) #define bfin_write_DMA21_IRQ_STATUS(val) bfin_write16(DMA21_IRQ_STATUS, val) #define bfin_read_DMA21_PERIPHERAL_MAP() bfin_read16(DMA21_PERIPHERAL_MAP) @@ -1536,23 +1532,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 22 Registers */ #define bfin_read_DMA22_NEXT_DESC_PTR() bfin_read32(DMA22_NEXT_DESC_PTR) -#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR) +#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR, val) #define bfin_read_DMA22_START_ADDR() bfin_read32(DMA22_START_ADDR) -#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR) +#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR, val) #define bfin_read_DMA22_CONFIG() bfin_read16(DMA22_CONFIG) #define bfin_write_DMA22_CONFIG(val) bfin_write16(DMA22_CONFIG, val) #define bfin_read_DMA22_X_COUNT() bfin_read16(DMA22_X_COUNT) #define bfin_write_DMA22_X_COUNT(val) bfin_write16(DMA22_X_COUNT, val) #define bfin_read_DMA22_X_MODIFY() bfin_read16(DMA22_X_MODIFY) -#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY) +#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY, val) #define bfin_read_DMA22_Y_COUNT() bfin_read16(DMA22_Y_COUNT) #define bfin_write_DMA22_Y_COUNT(val) bfin_write16(DMA22_Y_COUNT, val) #define bfin_read_DMA22_Y_MODIFY() bfin_read16(DMA22_Y_MODIFY) -#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY) +#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY, val) #define bfin_read_DMA22_CURR_DESC_PTR() bfin_read32(DMA22_CURR_DESC_PTR) -#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR) +#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR, val) #define bfin_read_DMA22_CURR_ADDR() bfin_read32(DMA22_CURR_ADDR) -#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR) +#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR, val) #define bfin_read_DMA22_IRQ_STATUS() bfin_read16(DMA22_IRQ_STATUS) #define bfin_write_DMA22_IRQ_STATUS(val) bfin_write16(DMA22_IRQ_STATUS, val) #define bfin_read_DMA22_PERIPHERAL_MAP() bfin_read16(DMA22_PERIPHERAL_MAP) @@ -1565,23 +1561,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* DMA Channel 23 Registers */ #define bfin_read_DMA23_NEXT_DESC_PTR() bfin_read32(DMA23_NEXT_DESC_PTR) -#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR) +#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR, val) #define bfin_read_DMA23_START_ADDR() bfin_read32(DMA23_START_ADDR) -#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR) +#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR, val) #define bfin_read_DMA23_CONFIG() bfin_read16(DMA23_CONFIG) #define bfin_write_DMA23_CONFIG(val) bfin_write16(DMA23_CONFIG, val) #define bfin_read_DMA23_X_COUNT() bfin_read16(DMA23_X_COUNT) #define bfin_write_DMA23_X_COUNT(val) bfin_write16(DMA23_X_COUNT, val) #define bfin_read_DMA23_X_MODIFY() bfin_read16(DMA23_X_MODIFY) -#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY) +#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY, val) #define bfin_read_DMA23_Y_COUNT() bfin_read16(DMA23_Y_COUNT) #define bfin_write_DMA23_Y_COUNT(val) bfin_write16(DMA23_Y_COUNT, val) #define bfin_read_DMA23_Y_MODIFY() bfin_read16(DMA23_Y_MODIFY) -#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY) +#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY, val) #define bfin_read_DMA23_CURR_DESC_PTR() bfin_read32(DMA23_CURR_DESC_PTR) -#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR) +#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR, val) #define bfin_read_DMA23_CURR_ADDR() bfin_read32(DMA23_CURR_ADDR) -#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR) +#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR, val) #define bfin_read_DMA23_IRQ_STATUS() bfin_read16(DMA23_IRQ_STATUS) #define bfin_write_DMA23_IRQ_STATUS(val) bfin_write16(DMA23_IRQ_STATUS, val) #define bfin_read_DMA23_PERIPHERAL_MAP() bfin_read16(DMA23_PERIPHERAL_MAP) @@ -1594,23 +1590,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 2 Registers */ #define bfin_read_MDMA_D2_NEXT_DESC_PTR() bfin_read32(MDMA_D2_NEXT_DESC_PTR) -#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR) +#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D2_START_ADDR() bfin_read32(MDMA_D2_START_ADDR) -#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR) +#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR, val) #define bfin_read_MDMA_D2_CONFIG() bfin_read16(MDMA_D2_CONFIG) #define bfin_write_MDMA_D2_CONFIG(val) bfin_write16(MDMA_D2_CONFIG, val) #define bfin_read_MDMA_D2_X_COUNT() bfin_read16(MDMA_D2_X_COUNT) #define bfin_write_MDMA_D2_X_COUNT(val) bfin_write16(MDMA_D2_X_COUNT, val) #define bfin_read_MDMA_D2_X_MODIFY() bfin_read16(MDMA_D2_X_MODIFY) -#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY) +#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY, val) #define bfin_read_MDMA_D2_Y_COUNT() bfin_read16(MDMA_D2_Y_COUNT) #define bfin_write_MDMA_D2_Y_COUNT(val) bfin_write16(MDMA_D2_Y_COUNT, val) #define bfin_read_MDMA_D2_Y_MODIFY() bfin_read16(MDMA_D2_Y_MODIFY) -#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY) +#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY, val) #define bfin_read_MDMA_D2_CURR_DESC_PTR() bfin_read32(MDMA_D2_CURR_DESC_PTR) -#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR) +#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR, val) #define bfin_read_MDMA_D2_CURR_ADDR() bfin_read32(MDMA_D2_CURR_ADDR) -#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR) +#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR, val) #define bfin_read_MDMA_D2_IRQ_STATUS() bfin_read16(MDMA_D2_IRQ_STATUS) #define bfin_write_MDMA_D2_IRQ_STATUS(val) bfin_write16(MDMA_D2_IRQ_STATUS, val) #define bfin_read_MDMA_D2_PERIPHERAL_MAP() bfin_read16(MDMA_D2_PERIPHERAL_MAP) @@ -1620,23 +1616,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D2_CURR_Y_COUNT() bfin_read16(MDMA_D2_CURR_Y_COUNT) #define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT, val) #define bfin_read_MDMA_S2_NEXT_DESC_PTR() bfin_read32(MDMA_S2_NEXT_DESC_PTR) -#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR) +#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S2_START_ADDR() bfin_read32(MDMA_S2_START_ADDR) -#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR) +#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR, val) #define bfin_read_MDMA_S2_CONFIG() bfin_read16(MDMA_S2_CONFIG) #define bfin_write_MDMA_S2_CONFIG(val) bfin_write16(MDMA_S2_CONFIG, val) #define bfin_read_MDMA_S2_X_COUNT() bfin_read16(MDMA_S2_X_COUNT) #define bfin_write_MDMA_S2_X_COUNT(val) bfin_write16(MDMA_S2_X_COUNT, val) #define bfin_read_MDMA_S2_X_MODIFY() bfin_read16(MDMA_S2_X_MODIFY) -#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY) +#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY, val) #define bfin_read_MDMA_S2_Y_COUNT() bfin_read16(MDMA_S2_Y_COUNT) #define bfin_write_MDMA_S2_Y_COUNT(val) bfin_write16(MDMA_S2_Y_COUNT, val) #define bfin_read_MDMA_S2_Y_MODIFY() bfin_read16(MDMA_S2_Y_MODIFY) -#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY) +#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY, val) #define bfin_read_MDMA_S2_CURR_DESC_PTR() bfin_read32(MDMA_S2_CURR_DESC_PTR) -#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR) +#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR, val) #define bfin_read_MDMA_S2_CURR_ADDR() bfin_read32(MDMA_S2_CURR_ADDR) -#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR) +#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR, val) #define bfin_read_MDMA_S2_IRQ_STATUS() bfin_read16(MDMA_S2_IRQ_STATUS) #define bfin_write_MDMA_S2_IRQ_STATUS(val) bfin_write16(MDMA_S2_IRQ_STATUS, val) #define bfin_read_MDMA_S2_PERIPHERAL_MAP() bfin_read16(MDMA_S2_PERIPHERAL_MAP) @@ -1649,23 +1645,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* MDMA Stream 3 Registers */ #define bfin_read_MDMA_D3_NEXT_DESC_PTR() bfin_read32(MDMA_D3_NEXT_DESC_PTR) -#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR) +#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR, val) #define bfin_read_MDMA_D3_START_ADDR() bfin_read32(MDMA_D3_START_ADDR) -#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR) +#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR, val) #define bfin_read_MDMA_D3_CONFIG() bfin_read16(MDMA_D3_CONFIG) #define bfin_write_MDMA_D3_CONFIG(val) bfin_write16(MDMA_D3_CONFIG, val) #define bfin_read_MDMA_D3_X_COUNT() bfin_read16(MDMA_D3_X_COUNT) #define bfin_write_MDMA_D3_X_COUNT(val) bfin_write16(MDMA_D3_X_COUNT, val) #define bfin_read_MDMA_D3_X_MODIFY() bfin_read16(MDMA_D3_X_MODIFY) -#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY) +#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY, val) #define bfin_read_MDMA_D3_Y_COUNT() bfin_read16(MDMA_D3_Y_COUNT) #define bfin_write_MDMA_D3_Y_COUNT(val) bfin_write16(MDMA_D3_Y_COUNT, val) #define bfin_read_MDMA_D3_Y_MODIFY() bfin_read16(MDMA_D3_Y_MODIFY) -#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY) +#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY, val) #define bfin_read_MDMA_D3_CURR_DESC_PTR() bfin_read32(MDMA_D3_CURR_DESC_PTR) -#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR) +#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR, val) #define bfin_read_MDMA_D3_CURR_ADDR() bfin_read32(MDMA_D3_CURR_ADDR) -#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR) +#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR, val) #define bfin_read_MDMA_D3_IRQ_STATUS() bfin_read16(MDMA_D3_IRQ_STATUS) #define bfin_write_MDMA_D3_IRQ_STATUS(val) bfin_write16(MDMA_D3_IRQ_STATUS, val) #define bfin_read_MDMA_D3_PERIPHERAL_MAP() bfin_read16(MDMA_D3_PERIPHERAL_MAP) @@ -1675,23 +1671,23 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_MDMA_D3_CURR_Y_COUNT() bfin_read16(MDMA_D3_CURR_Y_COUNT) #define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT, val) #define bfin_read_MDMA_S3_NEXT_DESC_PTR() bfin_read32(MDMA_S3_NEXT_DESC_PTR) -#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR) +#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR, val) #define bfin_read_MDMA_S3_START_ADDR() bfin_read32(MDMA_S3_START_ADDR) -#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR) +#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR, val) #define bfin_read_MDMA_S3_CONFIG() bfin_read16(MDMA_S3_CONFIG) #define bfin_write_MDMA_S3_CONFIG(val) bfin_write16(MDMA_S3_CONFIG, val) #define bfin_read_MDMA_S3_X_COUNT() bfin_read16(MDMA_S3_X_COUNT) #define bfin_write_MDMA_S3_X_COUNT(val) bfin_write16(MDMA_S3_X_COUNT, val) #define bfin_read_MDMA_S3_X_MODIFY() bfin_read16(MDMA_S3_X_MODIFY) -#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY) +#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY, val) #define bfin_read_MDMA_S3_Y_COUNT() bfin_read16(MDMA_S3_Y_COUNT) #define bfin_write_MDMA_S3_Y_COUNT(val) bfin_write16(MDMA_S3_Y_COUNT, val) #define bfin_read_MDMA_S3_Y_MODIFY() bfin_read16(MDMA_S3_Y_MODIFY) -#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY) +#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY, val) #define bfin_read_MDMA_S3_CURR_DESC_PTR() bfin_read32(MDMA_S3_CURR_DESC_PTR) -#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR) +#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR, val) #define bfin_read_MDMA_S3_CURR_ADDR() bfin_read32(MDMA_S3_CURR_ADDR) -#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR) +#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR, val) #define bfin_read_MDMA_S3_IRQ_STATUS() bfin_read16(MDMA_S3_IRQ_STATUS) #define bfin_write_MDMA_S3_IRQ_STATUS(val) bfin_write16(MDMA_S3_IRQ_STATUS, val) #define bfin_read_MDMA_S3_PERIPHERAL_MAP() bfin_read16(MDMA_S3_PERIPHERAL_MAP) diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h index 46ff31f..36a2ef7 100644 --- a/include/asm-blackfin/mach-bf548/dma.h +++ b/include/asm-blackfin/mach-bf548/dma.h @@ -73,6 +73,4 @@ #define MAX_BLACKFIN_DMA_CHANNEL 32 -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL]; #endif diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h index befc290..ab0b863 100644 --- a/include/asm-blackfin/mach-bf548/mem_init.h +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -29,16 +29,19 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) +#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000) +#define DDR_CLK_HZ(x) (1000*1000*1000/x) #if (CONFIG_MEM_MT46V32M16_6T) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) #define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) #define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) #define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) -#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) #define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) #define DDR_tWTR DDR_TWTR(1) @@ -49,12 +52,13 @@ #if (CONFIG_MEM_MT46V32M16_5B) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) #define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) #define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) #define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) -#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) +#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800)) #define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) #define DDR_tWTR DDR_TWTR(2) @@ -65,6 +69,7 @@ #if (CONFIG_MEM_GENERIC_BOARD) #define DDR_SIZE DEVSZ_512 #define DDR_WIDTH DEVWD_16 +#define DDR_MAX_tCK 13 #define DDR_tRCD DDR_TRCD(3) #define DDR_tWTR DDR_TWTR(2) @@ -77,14 +82,15 @@ #define DDR_tREFI DDR_TREFI(1288) #endif -#if (CONFIG_SCLK_HZ <= 133333333) -#define DDR_CL CL_2 -#elif (CONFIG_SCLK_HZ <= 166666666) -#define DDR_CL CL_2_5 +#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK)) +# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)." +#elif(CONFIG_SCLK_HZ <= 133333333) +# define DDR_CL CL_2 #else -#define DDR_CL CL_3 +# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)." #endif + #define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) #define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ | DDR_tMRD | DDR_tWR | DDR_tRCD) diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 0c1d461..82157ca 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -256,10 +256,14 @@ #define ANOMALY_05000357 (1) /* Conflicting Column Address Widths Causes SDRAM Errors */ #define ANOMALY_05000362 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ #define ANOMALY_05000366 (1) /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index b6f513b..8a4e66d 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -1,22 +1,38 @@ +/* + * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h + * based on: + * author: + * + * created: + * description: + * blackfin serial driver head file + * rev: + * + * modified: + * + * + * bugs: enter bugs at http://blackfin.uclinux.org/ + * + * this program is free software; you can redistribute it and/or modify + * it under the terms of the gnu general public license as published by + * the free software foundation; either version 2, or (at your option) + * any later version. + * + * this program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * merchantability or fitness for a particular purpose. see the + * gnu general public license for more details. + * + * you should have received a copy of the gnu general public license + * along with this program; see the file copying. + * if not, write to the free software foundation, + * 59 temple place - suite 330, boston, ma 02111-1307, usa. + */ + #include <linux/serial.h> #include <asm/dma.h> #include <asm/portmux.h> -#define NR_PORTS 1 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - #define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) #define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) #define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) @@ -84,7 +100,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) bfin_write16(uart->port.membase + OFFSET_LSR, -1); } -struct bfin_serial_port bfin_serial_ports[NR_PORTS]; +struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; @@ -115,7 +131,7 @@ struct bfin_serial_res bfin_serial_resource[] = { #define DRIVER_NAME "bfin-uart" -int nr_ports = NR_PORTS; +int nr_ports = BFIN_UART_NR_PORTS; static void bfin_serial_hw_init(struct bfin_serial_port *uart) { diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/include/asm-blackfin/mach-bf561/bfin_sir.h new file mode 100644 index 0000000..cefcf8b --- /dev/null +++ b/include/asm-blackfin/mach-bf561/bfin_sir.h @@ -0,0 +1,120 @@ +/* + * Blackfin Infra-red Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + * + */ + +#include <linux/serial.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) + +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) + +#ifdef CONFIG_SIR_BFIN_DMA +struct dma_rx_buf { + char *buf; + int head; + int tail; + }; +#endif /* CONFIG_SIR_BFIN_DMA */ + +struct bfin_sir_port { + unsigned char __iomem *membase; + unsigned int irq; + unsigned int lsr; + unsigned long clk; + struct net_device *dev; +#ifdef CONFIG_SIR_BFIN_DMA + int tx_done; + struct dma_rx_buf rx_dma_buf; + struct timer_list rx_dma_timer; + int rx_dma_nrows; +#endif /* CONFIG_SIR_BFIN_DMA */ + unsigned int tx_dma_channel; + unsigned int rx_dma_channel; +}; + +struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; + +struct bfin_sir_port_res { + unsigned long base_addr; + int irq; + unsigned int rx_dma_channel; + unsigned int tx_dma_channel; +}; + +struct bfin_sir_port_res bfin_sir_port_resource[] = { +#ifdef CONFIG_BFIN_SIR0 + { + 0xFFC00400, + IRQ_UART_RX, + CH_UART_RX, + CH_UART_TX, + }, +#endif +}; + +int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); + +struct bfin_sir_self { + struct bfin_sir_port *sir_port; + spinlock_t lock; + unsigned int open; + int speed; + int newspeed; + + struct sk_buff *txskb; + struct sk_buff *rxskb; + struct net_device_stats stats; + struct device *dev; + struct irlap_cb *irlap; + struct qos_info qos; + + iobuff_t tx_buff; + iobuff_t rx_buff; + + struct work_struct work; + int mtt; +}; + +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) +{ + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); + port->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | port->lsr; +} + +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) +{ + port->lsr = 0; + bfin_read16(port->membase + OFFSET_LSR); +} + +#define DRIVER_NAME "bfin_sir" + +static void bfin_sir_hw_init(void) +{ +#ifdef CONFIG_BFIN_SIR0 + peripheral_request(P_UART0_TX, DRIVER_NAME); + peripheral_request(P_UART0_RX, DRIVER_NAME); +#endif + SSYNC(); +} diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h index 3a16df2..0ea8666 100644 --- a/include/asm-blackfin/mach-bf561/blackfin.h +++ b/include/asm-blackfin/mach-bf561/blackfin.h @@ -69,5 +69,19 @@ #define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2)) #define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val) +#define BFIN_UART_NR_PORTS 1 + +#define OFFSET_THR 0x00 /* Transmit Holding register */ +#define OFFSET_RBR 0x00 /* Receive Buffer register */ +#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ +#define OFFSET_IER 0x04 /* Interrupt Enable Register */ +#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ +#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ +#define OFFSET_LCR 0x0C /* Line Control Register */ +#define OFFSET_MCR 0x10 /* Modem Control Register */ +#define OFFSET_LSR 0x14 /* Line Status Register */ +#define OFFSET_MSR 0x18 /* Modem Status Register */ +#define OFFSET_SCR 0x1C /* SCR Scratch Register */ +#define OFFSET_GCTL 0x24 /* Global Control Register */ #endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 1bc8d2f..b07ffcc 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -47,7 +47,30 @@ /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL,val) +/* Writing to PLL_CTL initiates a PLL relock sequence. */ +static __inline__ void bfin_write_PLL_CTL(unsigned int val) +{ + unsigned long flags, iwr0, iwr1; + + if (val == bfin_read_PLL_CTL()) + return; + + local_irq_save(flags); + /* Enable the PLL Wakeup bit in SIC IWR */ + iwr0 = bfin_read32(SICA_IWR0); + iwr1 = bfin_read32(SICA_IWR1); + /* Only allow PPL Wakeup) */ + bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + bfin_write32(SICA_IWR1, 0); + + bfin_write16(PLL_CTL, val); + SSYNC(); + asm("IDLE;"); + + bfin_write32(SICA_IWR0, iwr0); + bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); +} #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -56,6 +79,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr0, iwr1; + if (val == bfin_read_VR_CTL()) + return; + + local_irq_save(flags); /* Enable the PLL Wakeup bit in SIC IWR */ iwr0 = bfin_read32(SICA_IWR0); iwr1 = bfin_read32(SICA_IWR1); @@ -65,12 +92,11 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) bfin_write16(VR_CTL, val); SSYNC(); - - local_irq_save(flags); asm("IDLE;"); - local_irq_restore(flags); + bfin_write32(SICA_IWR0, iwr0); bfin_write32(SICA_IWR1, iwr1); + local_irq_restore(flags); } #define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) #define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index c3c0eb1..366c9b9 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -110,18 +110,23 @@ #define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ /* UART Controller (0xFFC00400 - 0xFFC004FF) */ -#define UART_THR 0xFFC00400 /* Transmit Holding register */ -#define UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART_LCR 0xFFC0040C /* Line Control Register */ -#define UART_MCR 0xFFC00410 /* Modem Control Register */ -#define UART_LSR 0xFFC00414 /* Line Status Register */ -#define UART_MSR 0xFFC00418 /* Modem Status Register */ -#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* + * Because include/linux/serial_reg.h have defined UART_*, + * So we define blackfin uart regs to BFIN_UART0_*. + */ +#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ +#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ +#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ +#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ +#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */ +#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ /* SPI Controller (0xFFC00500 - 0xFFC005FF) */ #define SPI0_REGBASE 0xFFC00500 @@ -866,6 +871,8 @@ /* PLL_DIV Masks */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ +#define CSEL 0x30 /* Core Select */ +#define SSEL 0xf /* System Select */ #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h index 766334b..21d9820 100644 --- a/include/asm-blackfin/mach-bf561/dma.h +++ b/include/asm-blackfin/mach-bf561/dma.h @@ -32,7 +32,4 @@ #define CH_IMEM_STREAM1_SRC 34 #define CH_IMEM_STREAM1_DEST 35 -extern int channel2irq(unsigned int channel); -extern struct dma_register *base_addr[]; - #endif diff --git a/include/asm-blackfin/portmux.h b/include/asm-blackfin/portmux.h index 0d3f650..0807b28 100644 --- a/include/asm-blackfin/portmux.h +++ b/include/asm-blackfin/portmux.h @@ -17,8 +17,8 @@ int peripheral_request(unsigned short per, const char *label); void peripheral_free(unsigned short per); -int peripheral_request_list(unsigned short per[], const char *label); -void peripheral_free_list(unsigned short per[]); +int peripheral_request_list(const unsigned short per[], const char *label); +void peripheral_free_list(const unsigned short per[]); #include <asm/gpio.h> #include <asm/mach/portmux.h> diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index 1033e5c..1c00407 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -26,9 +26,10 @@ static inline void wrusp(unsigned long usp) /* * User space process size: 1st byte beyond user address space. + * Fairly meaningless on nommu. Parts of user programs can be scattered + * in a lot of places, so just disable this by setting it to 0xFFFFFFFF. */ -extern unsigned long memory_end; -#define TASK_SIZE (memory_end) +#define TASK_SIZE 0xFFFFFFFF #ifdef __KERNEL__ #define STACK_TOP TASK_SIZE diff --git a/include/asm-blackfin/signal.h b/include/asm-blackfin/signal.h index 0250429..87951d2 100644 --- a/include/asm-blackfin/signal.h +++ b/include/asm-blackfin/signal.h @@ -143,7 +143,7 @@ struct sigaction { #endif /* __KERNEL__ */ typedef struct sigaltstack { - void *ss_sp; + void __user *ss_sp; int ss_flags; size_t ss_size; } stack_t; diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h index 15b99cf..bc2fe5a 100644 --- a/include/asm-blackfin/thread_info.h +++ b/include/asm-blackfin/thread_info.h @@ -81,14 +81,11 @@ struct thread_info { #define init_thread_info (init_thread_union.thread_info) #define init_stack (init_thread_union.stack) -/* How to get the thread information struct from C */ - -static inline struct thread_info *current_thread_info(void) - __attribute__ ((__const__)); - -/* Given a task stack pointer, you can find it's task structure - * just by masking it to the 8K boundary. +/* Given a task stack pointer, you can find its corresponding + * thread_info structure just by masking it to the THREAD_SIZE + * boundary (currently 8K as you can see above). */ +__attribute_const__ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h new file mode 100644 index 0000000..6e5859b --- /dev/null +++ b/include/asm-blackfin/time.h @@ -0,0 +1,36 @@ +/* + * asm-blackfin/time.h: + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ASM_BLACKFIN_TIME_H +#define _ASM_BLACKFIN_TIME_H + +/* + * The way that the Blackfin core timer works is: + * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE) + * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT) + * + * If you take the fastest clock (1ns, or 1GHz to make the math work easier) + * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter + * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need + * to use TSCALE, and program it to zero (which is pass CCLK through). + * If you feel like using it, try to keep HZ * TIMESCALE to some + * value that divides easy (like power of 2). + */ + +#ifndef CONFIG_CPU_FREQ +#define TIME_SCALE 1 +#else +/* + * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . + * Whenever we change the Core Clock frequency changes we immediately + * adjust the Core Timer Presale Register. This way we don't lose time. + */ +#define TIME_SCALE 4 +#endif + +#endif diff --git a/include/asm-blackfin/timex.h b/include/asm-blackfin/timex.h index 8285901..22b0806 100644 --- a/include/asm-blackfin/timex.h +++ b/include/asm-blackfin/timex.h @@ -1,18 +1,23 @@ -/* blackfin architecture timex specifications: Lineo Inc. 2001 +/* + * asm-blackfin/timex.h: cpu cycles! * - * Based on: include/asm-m68knommu/timex.h + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. */ -#ifndef _ASMBLACKFIN_TIMEX_H -#define _ASMBLACKFIN_TIMEX_H +#ifndef _ASM_BLACKFIN_TIMEX_H +#define _ASM_BLACKFIN_TIMEX_H #define CLOCK_TICK_RATE 1000000 /* Underlying HZ */ -typedef unsigned long cycles_t; +typedef unsigned long long cycles_t; static inline cycles_t get_cycles(void) { - return 0; + unsigned long tmp, tmp2; + __asm__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2)); + return tmp | ((cycles_t)tmp2 << 32); } #endif diff --git a/include/asm-blackfin/trace.h b/include/asm-blackfin/trace.h index ef18afb..312b596 100644 --- a/include/asm-blackfin/trace.h +++ b/include/asm-blackfin/trace.h @@ -62,14 +62,14 @@ extern unsigned long software_trace_buff[]; preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ dreg = [preg]; \ - [sp++] = dreg; \ + [--sp] = dreg; \ dreg = 0x1; \ [preg] = dreg; #define trace_buffer_restore(preg, dreg) \ preg.L = LO(TBUFCTL); \ preg.H = HI(TBUFCTL); \ - dreg = [sp--]; \ + dreg = [sp++]; \ [preg] = dreg; #else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 22a410b..d928b80 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -133,7 +133,7 @@ static inline int bad_user_access_length(void) } #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ - __FILE__, __LINE__, __FUNCTION__),\ + __FILE__, __LINE__, __func__),\ bad_user_access_length(), (-EFAULT)) /* @@ -177,7 +177,7 @@ static inline int bad_user_access_length(void) default: \ x = 0; \ printk(KERN_INFO "get_user_bad: %s:%d %s\n", \ - __FILE__, __LINE__, __FUNCTION__); \ + __FILE__, __LINE__, __func__); \ _err = __get_user_bad(); \ break; \ } \ diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h index c18a399..42955d0 100644 --- a/include/asm-blackfin/unistd.h +++ b/include/asm-blackfin/unistd.h @@ -265,14 +265,14 @@ /* 258 __NR_remap_file_pages */ #define __NR_set_tid_address 259 #define __NR_timer_create 260 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_timer_settime 261 +#define __NR_timer_gettime 262 +#define __NR_timer_getoverrun 263 +#define __NR_timer_delete 264 +#define __NR_clock_settime 265 +#define __NR_clock_gettime 266 +#define __NR_clock_getres 267 +#define __NR_clock_nanosleep 268 #define __NR_statfs64 269 #define __NR_fstatfs64 270 #define __NR_tgkill 271 @@ -283,11 +283,11 @@ /* 276 __NR_get_mempolicy */ /* 277 __NR_set_mempolicy */ #define __NR_mq_open 278 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_mq_unlink 279 +#define __NR_mq_timedsend 280 +#define __NR_mq_timedreceive 281 +#define __NR_mq_notify 282 +#define __NR_mq_getsetattr 283 #define __NR_kexec_load 284 #define __NR_waitid 285 #define __NR_add_key 286 diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h index 30a67a9..cb307f8 100644 --- a/include/asm-frv/system.h +++ b/include/asm-frv/system.h @@ -197,11 +197,6 @@ do { \ do { var = (value); barrier(); } while (0) #endif -#define HARD_RESET_NOW() \ -do { \ - cli(); \ -} while(1) - extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2))); extern void free_initmem(void); diff --git a/include/asm-frv/topology.h b/include/asm-frv/topology.h index abe7298..9427243 100644 --- a/include/asm-frv/topology.h +++ b/include/asm-frv/topology.h @@ -5,10 +5,8 @@ #error NUMA not supported yet -#else /* !CONFIG_NUMA */ +#endif /* CONFIG_NUMA */ #include <asm-generic/topology.h> -#endif /* CONFIG_NUMA */ - #endif /* _ASM_TOPOLOGY_H */ diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h index 342a2a0..a6aea79 100644 --- a/include/asm-generic/topology.h +++ b/include/asm-generic/topology.h @@ -27,6 +27,8 @@ #ifndef _ASM_GENERIC_TOPOLOGY_H #define _ASM_GENERIC_TOPOLOGY_H +#ifndef CONFIG_NUMA + /* Other architectures wishing to use this simple topology API should fill in the below functions as appropriate in their own <asm/topology.h> file. */ #ifndef cpu_to_node @@ -52,4 +54,16 @@ ) #endif +#endif /* CONFIG_NUMA */ + +/* returns pointer to cpumask for specified node */ +#ifndef node_to_cpumask_ptr + +#define node_to_cpumask_ptr(v, node) \ + cpumask_t _##v = node_to_cpumask(node), *v = &_##v + +#define node_to_cpumask_ptr_next(v, node) \ + _##v = node_to_cpumask(node) +#endif + #endif /* _ASM_GENERIC_TOPOLOGY_H */ diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h index f1663aa..18a4321 100644 --- a/include/asm-ia64/mca.h +++ b/include/asm-ia64/mca.h @@ -157,6 +157,7 @@ extern void ia64_mca_printk(const char * fmt, ...) struct ia64_mca_notify_die { struct ia64_sal_os_state *sos; int *monarch_cpu; + int *data; }; DECLARE_PER_CPU(u64, ia64_mca_pal_base); diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h index 6f6d69e..ee118b9 100644 --- a/include/asm-ia64/sn/nodepda.h +++ b/include/asm-ia64/sn/nodepda.h @@ -9,7 +9,6 @@ #define _ASM_IA64_SN_NODEPDA_H -#include <asm/semaphore.h> #include <asm/irq.h> #include <asm/sn/arch.h> #include <asm/sn/intr.h> diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h deleted file mode 100644 index f7711b3..0000000 --- a/include/asm-ia64/sn/xp.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004-2005 Silicon Graphics, Inc. All rights reserved. - */ - - -/* - * External Cross Partition (XP) structures and defines. - */ - - -#ifndef _ASM_IA64_SN_XP_H -#define _ASM_IA64_SN_XP_H - - -#include <linux/cache.h> -#include <linux/hardirq.h> -#include <linux/mutex.h> -#include <asm/sn/types.h> -#include <asm/sn/bte.h> - - -#ifdef USE_DBUG_ON -#define DBUG_ON(condition) BUG_ON(condition) -#else -#define DBUG_ON(condition) -#endif - - -/* - * Define the maximum number of logically defined partitions the system - * can support. It is constrained by the maximum number of hardware - * partitionable regions. The term 'region' in this context refers to the - * minimum number of nodes that can comprise an access protection grouping. - * The access protection is in regards to memory, IPI and IOI. - * - * The maximum number of hardware partitionable regions is equal to the - * maximum number of nodes in the entire system divided by the minimum number - * of nodes that comprise an access protection grouping. - */ -#define XP_MAX_PARTITIONS 64 - - -/* - * Define the number of u64s required to represent all the C-brick nasids - * as a bitmap. The cross-partition kernel modules deal only with - * C-brick nasids, thus the need for bitmaps which don't account for - * odd-numbered (non C-brick) nasids. - */ -#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) -#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) -#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) - - -/* - * Wrapper for bte_copy() that should it return a failure status will retry - * the bte_copy() once in the hope that the failure was due to a temporary - * aberration (i.e., the link going down temporarily). - * - * src - physical address of the source of the transfer. - * vdst - virtual address of the destination of the transfer. - * len - number of bytes to transfer from source to destination. - * mode - see bte_copy() for definition. - * notification - see bte_copy() for definition. - * - * Note: xp_bte_copy() should never be called while holding a spinlock. - */ -static inline bte_result_t -xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) -{ - bte_result_t ret; - u64 pdst = ia64_tpa(vdst); - - - /* - * Ensure that the physically mapped memory is contiguous. - * - * We do this by ensuring that the memory is from region 7 only. - * If the need should arise to use memory from one of the other - * regions, then modify the BUG_ON() statement to ensure that the - * memory from that region is always physically contiguous. - */ - BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); - - ret = bte_copy(src, pdst, len, mode, notification); - if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { - if (!in_interrupt()) { - cond_resched(); - } - ret = bte_copy(src, pdst, len, mode, notification); - } - - return ret; -} - - -/* - * XPC establishes channel connections between the local partition and any - * other partition that is currently up. Over these channels, kernel-level - * `users' can communicate with their counterparts on the other partitions. - * - * The maxinum number of channels is limited to eight. For performance reasons, - * the internal cross partition structures require sixteen bytes per channel, - * and eight allows all of this interface-shared info to fit in one cache line. - * - * XPC_NCHANNELS reflects the total number of channels currently defined. - * If the need for additional channels arises, one can simply increase - * XPC_NCHANNELS accordingly. If the day should come where that number - * exceeds the MAXIMUM number of channels allowed (eight), then one will need - * to make changes to the XPC code to allow for this. - */ -#define XPC_MEM_CHANNEL 0 /* memory channel number */ -#define XPC_NET_CHANNEL 1 /* network channel number */ - -#define XPC_NCHANNELS 2 /* #of defined channels */ -#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */ - -#if XPC_NCHANNELS > XPC_MAX_NCHANNELS -#error XPC_NCHANNELS exceeds MAXIMUM allowed. -#endif - - -/* - * The format of an XPC message is as follows: - * - * +-------+--------------------------------+ - * | flags |////////////////////////////////| - * +-------+--------------------------------+ - * | message # | - * +----------------------------------------+ - * | payload (user-defined message) | - * | | - * : - * | | - * +----------------------------------------+ - * - * The size of the payload is defined by the user via xpc_connect(). A user- - * defined message resides in the payload area. - * - * The user should have no dealings with the message header, but only the - * message's payload. When a message entry is allocated (via xpc_allocate()) - * a pointer to the payload area is returned and not the actual beginning of - * the XPC message. The user then constructs a message in the payload area - * and passes that pointer as an argument on xpc_send() or xpc_send_notify(). - * - * The size of a message entry (within a message queue) must be a cacheline - * sized multiple in order to facilitate the BTE transfer of messages from one - * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user - * that wants to fit as many msg entries as possible in a given memory size - * (e.g. a memory page). - */ -struct xpc_msg { - u8 flags; /* FOR XPC INTERNAL USE ONLY */ - u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ - s64 number; /* FOR XPC INTERNAL USE ONLY */ - - u64 payload; /* user defined portion of message */ -}; - - -#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload) -#define XPC_MSG_SIZE(_payload_size) \ - L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size)) - - -/* - * Define the return values and values passed to user's callout functions. - * (It is important to add new value codes at the end just preceding - * xpcUnknownReason, which must have the highest numerical value.) - */ -enum xpc_retval { - xpcSuccess = 0, - - xpcNotConnected, /* 1: channel is not connected */ - xpcConnected, /* 2: channel connected (opened) */ - xpcRETIRED1, /* 3: (formerly xpcDisconnected) */ - - xpcMsgReceived, /* 4: message received */ - xpcMsgDelivered, /* 5: message delivered and acknowledged */ - - xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */ - - xpcNoWait, /* 7: operation would require wait */ - xpcRetry, /* 8: retry operation */ - xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */ - xpcInterrupted, /* 10: interrupted wait */ - - xpcUnequalMsgSizes, /* 11: message size disparity between sides */ - xpcInvalidAddress, /* 12: invalid address */ - - xpcNoMemory, /* 13: no memory available for XPC structures */ - xpcLackOfResources, /* 14: insufficient resources for operation */ - xpcUnregistered, /* 15: channel is not registered */ - xpcAlreadyRegistered, /* 16: channel is already registered */ - - xpcPartitionDown, /* 17: remote partition is down */ - xpcNotLoaded, /* 18: XPC module is not loaded */ - xpcUnloading, /* 19: this side is unloading XPC module */ - - xpcBadMagic, /* 20: XPC MAGIC string not found */ - - xpcReactivating, /* 21: remote partition was reactivated */ - - xpcUnregistering, /* 22: this side is unregistering channel */ - xpcOtherUnregistering, /* 23: other side is unregistering channel */ - - xpcCloneKThread, /* 24: cloning kernel thread */ - xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */ - - xpcNoHeartbeat, /* 26: remote partition has no heartbeat */ - - xpcPioReadError, /* 27: PIO read error */ - xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */ - - xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */ - xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */ - xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */ - xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */ - xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */ - xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */ - xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */ - xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */ - xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */ - xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */ - - xpcBadVersion, /* 39: bad version number */ - xpcVarsNotSet, /* 40: the XPC variables are not set up */ - xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */ - xpcInvalidPartid, /* 42: invalid partition ID */ - xpcLocalPartid, /* 43: local partition ID */ - - xpcOtherGoingDown, /* 44: other side going down, reason unknown */ - xpcSystemGoingDown, /* 45: system is going down, reason unknown */ - xpcSystemHalt, /* 46: system is being halted */ - xpcSystemReboot, /* 47: system is being rebooted */ - xpcSystemPoweroff, /* 48: system is being powered off */ - - xpcDisconnecting, /* 49: channel disconnecting (closing) */ - - xpcOpenCloseError, /* 50: channel open/close protocol error */ - - xpcDisconnected, /* 51: channel disconnected (closed) */ - - xpcBteSh2Start, /* 52: BTE CRB timeout */ - - /* 53: 0x1 BTE Error Response Short */ - xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT, - - /* 54: 0x2 BTE Error Response Long */ - xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG, - - /* 56: 0x4 BTE Error Response DSB */ - xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP, - - /* 60: 0x8 BTE Error Response Access */ - xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS, - - /* 68: 0x10 BTE Error CRB timeout */ - xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO, - - /* 84: 0x20 BTE Error NACK limit */ - xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT, - - /* 115: BTE end */ - xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL, - - xpcUnknownReason /* 116: unknown reason -- must be last in list */ -}; - - -/* - * Define the callout function types used by XPC to update the user on - * connection activity and state changes (via the user function registered by - * xpc_connect()) and to notify them of messages received and delivered (via - * the user function registered by xpc_send_notify()). - * - * The two function types are xpc_channel_func and xpc_notify_func and - * both share the following arguments, with the exception of "data", which - * only xpc_channel_func has. - * - * Arguments: - * - * reason - reason code. (See following table.) - * partid - partition ID associated with condition. - * ch_number - channel # associated with condition. - * data - pointer to optional data. (See following table.) - * key - pointer to optional user-defined value provided as the "key" - * argument to xpc_connect() or xpc_send_notify(). - * - * In the following table the "Optional Data" column applies to callouts made - * to functions registered by xpc_connect(). A "NA" in that column indicates - * that this reason code can be passed to functions registered by - * xpc_send_notify() (i.e. they don't have data arguments). - * - * Also, the first three reason codes in the following table indicate - * success, whereas the others indicate failure. When a failure reason code - * is received, one can assume that the channel is not connected. - * - * - * Reason Code | Cause | Optional Data - * =====================+================================+===================== - * xpcConnected | connection has been established| max #of entries - * | to the specified partition on | allowed in message - * | the specified channel | queue - * ---------------------+--------------------------------+--------------------- - * xpcMsgReceived | an XPC message arrived from | address of payload - * | the specified partition on the | - * | specified channel | [the user must call - * | | xpc_received() when - * | | finished with the - * | | payload] - * ---------------------+--------------------------------+--------------------- - * xpcMsgDelivered | notification that the message | NA - * | was delivered to the intended | - * | recipient and that they have | - * | acknowledged its receipt by | - * | calling xpc_received() | - * =====================+================================+===================== - * xpcUnequalMsgSizes | can't connect to the specified | NULL - * | partition on the specified | - * | channel because of mismatched | - * | message sizes | - * ---------------------+--------------------------------+--------------------- - * xpcNoMemory | insufficient memory avaiable | NULL - * | to allocate message queue | - * ---------------------+--------------------------------+--------------------- - * xpcLackOfResources | lack of resources to create | NULL - * | the necessary kthreads to | - * | support the channel | - * ---------------------+--------------------------------+--------------------- - * xpcUnregistering | this side's user has | NULL or NA - * | unregistered by calling | - * | xpc_disconnect() | - * ---------------------+--------------------------------+--------------------- - * xpcOtherUnregistering| the other side's user has | NULL or NA - * | unregistered by calling | - * | xpc_disconnect() | - * ---------------------+--------------------------------+--------------------- - * xpcNoHeartbeat | the other side's XPC is no | NULL or NA - * | longer heartbeating | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcUnloading | this side's XPC module is | NULL or NA - * | being unloaded | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcOtherUnloading | the other side's XPC module is | NULL or NA - * | is being unloaded | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA - * | error while sending an IPI | - * | | - * ---------------------+--------------------------------+--------------------- - * xpcInvalidAddress | the address either received or | NULL or NA - * | sent by the specified partition| - * | is invalid | - * ---------------------+--------------------------------+--------------------- - * xpcBteNotAvailable | attempt to pull data from the | NULL or NA - * xpcBtePoisonError | specified partition over the | - * xpcBteWriteError | specified channel via a | - * xpcBteAccessError | bte_copy() failed | - * xpcBteTimeOutError | | - * xpcBteXtalkError | | - * xpcBteDirectoryError | | - * xpcBteGenericError | | - * xpcBteUnmappedError | | - * ---------------------+--------------------------------+--------------------- - * xpcUnknownReason | the specified channel to the | NULL or NA - * | specified partition was | - * | unavailable for unknown reasons| - * =====================+================================+===================== - */ - -typedef void (*xpc_channel_func)(enum xpc_retval reason, partid_t partid, - int ch_number, void *data, void *key); - -typedef void (*xpc_notify_func)(enum xpc_retval reason, partid_t partid, - int ch_number, void *key); - - -/* - * The following is a registration entry. There is a global array of these, - * one per channel. It is used to record the connection registration made - * by the users of XPC. As long as a registration entry exists, for any - * partition that comes up, XPC will attempt to establish a connection on - * that channel. Notification that a connection has been made will occur via - * the xpc_channel_func function. - * - * The 'func' field points to the function to call when aynchronous - * notification is required for such events as: a connection established/lost, - * or an incoming message received, or an error condition encountered. A - * non-NULL 'func' field indicates that there is an active registration for - * the channel. - */ -struct xpc_registration { - struct mutex mutex; - xpc_channel_func func; /* function to call */ - void *key; /* pointer to user's key */ - u16 nentries; /* #of msg entries in local msg queue */ - u16 msg_size; /* message queue's message size */ - u32 assigned_limit; /* limit on #of assigned kthreads */ - u32 idle_limit; /* limit on #of idle kthreads */ -} ____cacheline_aligned; - - -#define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL) - - -/* the following are valid xpc_allocate() flags */ -#define XPC_WAIT 0 /* wait flag */ -#define XPC_NOWAIT 1 /* no wait flag */ - - -struct xpc_interface { - void (*connect)(int); - void (*disconnect)(int); - enum xpc_retval (*allocate)(partid_t, int, u32, void **); - enum xpc_retval (*send)(partid_t, int, void *); - enum xpc_retval (*send_notify)(partid_t, int, void *, - xpc_notify_func, void *); - void (*received)(partid_t, int, void *); - enum xpc_retval (*partid_to_nasids)(partid_t, void *); -}; - - -extern struct xpc_interface xpc_interface; - -extern void xpc_set_interface(void (*)(int), - void (*)(int), - enum xpc_retval (*)(partid_t, int, u32, void **), - enum xpc_retval (*)(partid_t, int, void *), - enum xpc_retval (*)(partid_t, int, void *, xpc_notify_func, - void *), - void (*)(partid_t, int, void *), - enum xpc_retval (*)(partid_t, void *)); -extern void xpc_clear_interface(void); - - -extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16, - u16, u32, u32); -extern void xpc_disconnect(int); - -static inline enum xpc_retval -xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload) -{ - return xpc_interface.allocate(partid, ch_number, flags, payload); -} - -static inline enum xpc_retval -xpc_send(partid_t partid, int ch_number, void *payload) -{ - return xpc_interface.send(partid, ch_number, payload); -} - -static inline enum xpc_retval -xpc_send_notify(partid_t partid, int ch_number, void *payload, - xpc_notify_func func, void *key) -{ - return xpc_interface.send_notify(partid, ch_number, payload, func, key); -} - -static inline void -xpc_received(partid_t partid, int ch_number, void *payload) -{ - return xpc_interface.received(partid, ch_number, payload); -} - -static inline enum xpc_retval -xpc_partid_to_nasids(partid_t partid, void *nasids) -{ - return xpc_interface.partid_to_nasids(partid, nasids); -} - - -extern u64 xp_nofault_PIOR_target; -extern int xp_nofault_PIOR(void *); -extern int xp_error_PIOR(void); - - -#endif /* _ASM_IA64_SN_XP_H */ - diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h deleted file mode 100644 index 3c0900a..0000000 --- a/include/asm-ia64/sn/xpc.h +++ /dev/null @@ -1,1267 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved. - */ - - -/* - * Cross Partition Communication (XPC) structures and macros. - */ - -#ifndef _ASM_IA64_SN_XPC_H -#define _ASM_IA64_SN_XPC_H - - -#include <linux/interrupt.h> -#include <linux/sysctl.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/completion.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/sn/bte.h> -#include <asm/sn/clksupport.h> -#include <asm/sn/addrs.h> -#include <asm/sn/mspec.h> -#include <asm/sn/shub_mmr.h> -#include <asm/sn/xp.h> - - -/* - * XPC Version numbers consist of a major and minor number. XPC can always - * talk to versions with same major #, and never talk to versions with a - * different major #. - */ -#define _XPC_VERSION(_maj, _min) (((_maj) << 4) | ((_min) & 0xf)) -#define XPC_VERSION_MAJOR(_v) ((_v) >> 4) -#define XPC_VERSION_MINOR(_v) ((_v) & 0xf) - - -/* - * The next macros define word or bit representations for given - * C-brick nasid in either the SAL provided bit array representing - * nasids in the partition/machine or the AMO_t array used for - * inter-partition initiation communications. - * - * For SN2 machines, C-Bricks are alway even numbered NASIDs. As - * such, some space will be saved by insisting that nasid information - * passed from SAL always be packed for C-Bricks and the - * cross-partition interrupts use the same packing scheme. - */ -#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2) -#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1)) -#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \ - (1UL << XPC_NASID_B_INDEX(_n))) -#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) - -#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ -#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ - -/* define the process name of HB checker and the CPU it is pinned to */ -#define XPC_HB_CHECK_THREAD_NAME "xpc_hb" -#define XPC_HB_CHECK_CPU 0 - -/* define the process name of the discovery thread */ -#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery" - - -/* - * the reserved page - * - * SAL reserves one page of memory per partition for XPC. Though a full page - * in length (16384 bytes), its starting address is not page aligned, but it - * is cacheline aligned. The reserved page consists of the following: - * - * reserved page header - * - * The first cacheline of the reserved page contains the header - * (struct xpc_rsvd_page). Before SAL initialization has completed, - * SAL has set up the following fields of the reserved page header: - * SAL_signature, SAL_version, partid, and nasids_size. The other - * fields are set up by XPC. (xpc_rsvd_page points to the local - * partition's reserved page.) - * - * part_nasids mask - * mach_nasids mask - * - * SAL also sets up two bitmaps (or masks), one that reflects the actual - * nasids in this partition (part_nasids), and the other that reflects - * the actual nasids in the entire machine (mach_nasids). We're only - * interested in the even numbered nasids (which contain the processors - * and/or memory), so we only need half as many bits to represent the - * nasids. The part_nasids mask is located starting at the first cacheline - * following the reserved page header. The mach_nasids mask follows right - * after the part_nasids mask. The size in bytes of each mask is reflected - * by the reserved page header field 'nasids_size'. (Local partition's - * mask pointers are xpc_part_nasids and xpc_mach_nasids.) - * - * vars - * vars part - * - * Immediately following the mach_nasids mask are the XPC variables - * required by other partitions. First are those that are generic to all - * partitions (vars), followed on the next available cacheline by those - * which are partition specific (vars part). These are setup by XPC. - * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) - * - * Note: Until vars_pa is set, the partition XPC code has not been initialized. - */ -struct xpc_rsvd_page { - u64 SAL_signature; /* SAL: unique signature */ - u64 SAL_version; /* SAL: version */ - u8 partid; /* SAL: partition ID */ - u8 version; - u8 pad1[6]; /* align to next u64 in cacheline */ - volatile u64 vars_pa; - struct timespec stamp; /* time when reserved page was setup by XPC */ - u64 pad2[9]; /* align to last u64 in cacheline */ - u64 nasids_size; /* SAL: size of each nasid mask in bytes */ -}; - -#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */ - -#define XPC_SUPPORTS_RP_STAMP(_version) \ - (_version >= _XPC_VERSION(1,1)) - -/* - * compare stamps - the return value is: - * - * < 0, if stamp1 < stamp2 - * = 0, if stamp1 == stamp2 - * > 0, if stamp1 > stamp2 - */ -static inline int -xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) -{ - int ret; - - - if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) { - ret = stamp1->tv_nsec - stamp2->tv_nsec; - } - return ret; -} - - -/* - * Define the structures by which XPC variables can be exported to other - * partitions. (There are two: struct xpc_vars and struct xpc_vars_part) - */ - -/* - * The following structure describes the partition generic variables - * needed by other partitions in order to properly initialize. - * - * struct xpc_vars version number also applies to struct xpc_vars_part. - * Changes to either structure and/or related functionality should be - * reflected by incrementing either the major or minor version numbers - * of struct xpc_vars. - */ -struct xpc_vars { - u8 version; - u64 heartbeat; - u64 heartbeating_to_mask; - u64 heartbeat_offline; /* if 0, heartbeat should be changing */ - int act_nasid; - int act_phys_cpuid; - u64 vars_part_pa; - u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ - AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ -}; - -#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */ - -#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ - (_version >= _XPC_VERSION(3,1)) - - -static inline int -xpc_hb_allowed(partid_t partid, struct xpc_vars *vars) -{ - return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); -} - -static inline void -xpc_allow_hb(partid_t partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask | (1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - -static inline void -xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask & ~(1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - - -/* - * The AMOs page consists of a number of AMO variables which are divided into - * four groups, The first two groups are used to identify an IRQ's sender. - * These two groups consist of 64 and 128 AMO variables respectively. The last - * two groups, consisting of just one AMO variable each, are used to identify - * the remote partitions that are currently engaged (from the viewpoint of - * the XPC running on the remote partition). - */ -#define XPC_NOTIFY_IRQ_AMOS 0 -#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) -#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) -#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) - - -/* - * The following structure describes the per partition specific variables. - * - * An array of these structures, one per partition, will be defined. As a - * partition becomes active XPC will copy the array entry corresponding to - * itself from that partition. It is desirable that the size of this - * structure evenly divide into a cacheline, such that none of the entries - * in this array crosses a cacheline boundary. As it is now, each entry - * occupies half a cacheline. - */ -struct xpc_vars_part { - volatile u64 magic; - - u64 openclose_args_pa; /* physical address of open and close args */ - u64 GPs_pa; /* physical address of Get/Put values */ - - u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */ - int IPI_nasid; /* nasid of where to send IPIs */ - int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */ - - u8 nchannels; /* #of defined channels supported */ - - u8 reserved[23]; /* pad to a full 64 bytes */ -}; - -/* - * The vars_part MAGIC numbers play a part in the first contact protocol. - * - * MAGIC1 indicates that the per partition specific variables for a remote - * partition have been initialized by this partition. - * - * MAGIC2 indicates that this partition has pulled the remote partititions - * per partition variables that pertain to this partition. - */ -#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ -#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ - - -/* the reserved page sizes and offsets */ - -#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) -#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) - -#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE) -#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) -#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words) -#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE) - - -/* - * Functions registered by add_timer() or called by kernel_thread() only - * allow for a single 64-bit argument. The following macros can be used to - * pack and unpack two (32-bit, 16-bit or 8-bit) arguments into or out from - * the passed argument. - */ -#define XPC_PACK_ARGS(_arg1, _arg2) \ - ((((u64) _arg1) & 0xffffffff) | \ - ((((u64) _arg2) & 0xffffffff) << 32)) - -#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff) -#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff) - - - -/* - * Define a Get/Put value pair (pointers) used with a message queue. - */ -struct xpc_gp { - volatile s64 get; /* Get value */ - volatile s64 put; /* Put value */ -}; - -#define XPC_GP_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS) - - - -/* - * Define a structure that contains arguments associated with opening and - * closing a channel. - */ -struct xpc_openclose_args { - u16 reason; /* reason why channel is closing */ - u16 msg_size; /* sizeof each message entry */ - u16 remote_nentries; /* #of message entries in remote msg queue */ - u16 local_nentries; /* #of message entries in local msg queue */ - u64 local_msgqueue_pa; /* physical address of local message queue */ -}; - -#define XPC_OPENCLOSE_ARGS_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS) - - - -/* struct xpc_msg flags */ - -#define XPC_M_DONE 0x01 /* msg has been received/consumed */ -#define XPC_M_READY 0x02 /* msg is ready to be sent */ -#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */ - - -#define XPC_MSG_ADDRESS(_payload) \ - ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET)) - - - -/* - * Defines notify entry. - * - * This is used to notify a message's sender that their message was received - * and consumed by the intended recipient. - */ -struct xpc_notify { - volatile u8 type; /* type of notification */ - - /* the following two fields are only used if type == XPC_N_CALL */ - xpc_notify_func func; /* user's notify function */ - void *key; /* pointer to user's key */ -}; - -/* struct xpc_notify type of notification */ - -#define XPC_N_CALL 0x01 /* notify function provided by user */ - - - -/* - * Define the structure that manages all the stuff required by a channel. In - * particular, they are used to manage the messages sent across the channel. - * - * This structure is private to a partition, and is NOT shared across the - * partition boundary. - * - * There is an array of these structures for each remote partition. It is - * allocated at the time a partition becomes active. The array contains one - * of these structures for each potential channel connection to that partition. - * - * Each of these structures manages two message queues (circular buffers). - * They are allocated at the time a channel connection is made. One of - * these message queues (local_msgqueue) holds the locally created messages - * that are destined for the remote partition. The other of these message - * queues (remote_msgqueue) is a locally cached copy of the remote partition's - * own local_msgqueue. - * - * The following is a description of the Get/Put pointers used to manage these - * two message queues. Consider the local_msgqueue to be on one partition - * and the remote_msgqueue to be its cached copy on another partition. A - * description of what each of the lettered areas contains is included. - * - * - * local_msgqueue remote_msgqueue - * - * |/////////| |/////////| - * w_remote_GP.get --> +---------+ |/////////| - * | F | |/////////| - * remote_GP.get --> +---------+ +---------+ <-- local_GP->get - * | | | | - * | | | E | - * | | | | - * | | +---------+ <-- w_local_GP.get - * | B | |/////////| - * | | |////D////| - * | | |/////////| - * | | +---------+ <-- w_remote_GP.put - * | | |////C////| - * local_GP->put --> +---------+ +---------+ <-- remote_GP.put - * | | |/////////| - * | A | |/////////| - * | | |/////////| - * w_local_GP.put --> +---------+ |/////////| - * |/////////| |/////////| - * - * - * ( remote_GP.[get|put] are cached copies of the remote - * partition's local_GP->[get|put], and thus their values can - * lag behind their counterparts on the remote partition. ) - * - * - * A - Messages that have been allocated, but have not yet been sent to the - * remote partition. - * - * B - Messages that have been sent, but have not yet been acknowledged by the - * remote partition as having been received. - * - * C - Area that needs to be prepared for the copying of sent messages, by - * the clearing of the message flags of any previously received messages. - * - * D - Area into which sent messages are to be copied from the remote - * partition's local_msgqueue and then delivered to their intended - * recipients. [ To allow for a multi-message copy, another pointer - * (next_msg_to_pull) has been added to keep track of the next message - * number needing to be copied (pulled). It chases after w_remote_GP.put. - * Any messages lying between w_local_GP.get and next_msg_to_pull have - * been copied and are ready to be delivered. ] - * - * E - Messages that have been copied and delivered, but have not yet been - * acknowledged by the recipient as having been received. - * - * F - Messages that have been acknowledged, but XPC has not yet notified the - * sender that the message was received by its intended recipient. - * This is also an area that needs to be prepared for the allocating of - * new messages, by the clearing of the message flags of the acknowledged - * messages. - */ -struct xpc_channel { - partid_t partid; /* ID of remote partition connected */ - spinlock_t lock; /* lock for updating this structure */ - u32 flags; /* general flags */ - - enum xpc_retval reason; /* reason why channel is disconnect'g */ - int reason_line; /* line# disconnect initiated from */ - - u16 number; /* channel # */ - - u16 msg_size; /* sizeof each msg entry */ - u16 local_nentries; /* #of msg entries in local msg queue */ - u16 remote_nentries; /* #of msg entries in remote msg queue*/ - - void *local_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *local_msgqueue; /* local message queue */ - void *remote_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *remote_msgqueue;/* cached copy of remote partition's */ - /* local message queue */ - u64 remote_msgqueue_pa; /* phys addr of remote partition's */ - /* local message queue */ - - atomic_t references; /* #of external references to queues */ - - atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ - wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ - - u8 delayed_IPI_flags; /* IPI flags received, but delayed */ - /* action until channel disconnected */ - - /* queue of msg senders who want to be notified when msg received */ - - atomic_t n_to_notify; /* #of msg senders to notify */ - struct xpc_notify *notify_queue;/* notify queue for messages sent */ - - xpc_channel_func func; /* user's channel function */ - void *key; /* pointer to user's key */ - - struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ - struct completion wdisconnect_wait; /* wait for channel disconnect */ - - struct xpc_openclose_args *local_openclose_args; /* args passed on */ - /* opening or closing of channel */ - - /* various flavors of local and remote Get/Put values */ - - struct xpc_gp *local_GP; /* local Get/Put values */ - struct xpc_gp remote_GP; /* remote Get/Put values */ - struct xpc_gp w_local_GP; /* working local Get/Put values */ - struct xpc_gp w_remote_GP; /* working remote Get/Put values */ - s64 next_msg_to_pull; /* Put value of next msg to pull */ - - /* kthread management related fields */ - -// >>> rethink having kthreads_assigned_limit and kthreads_idle_limit; perhaps -// >>> allow the assigned limit be unbounded and let the idle limit be dynamic -// >>> dependent on activity over the last interval of time - atomic_t kthreads_assigned; /* #of kthreads assigned to channel */ - u32 kthreads_assigned_limit; /* limit on #of kthreads assigned */ - atomic_t kthreads_idle; /* #of kthreads idle waiting for work */ - u32 kthreads_idle_limit; /* limit on #of kthreads idle */ - atomic_t kthreads_active; /* #of kthreads actively working */ - // >>> following field is temporary - u32 kthreads_created; /* total #of kthreads created */ - - wait_queue_head_t idle_wq; /* idle kthread wait queue */ - -} ____cacheline_aligned; - - -/* struct xpc_channel flags */ - -#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */ - -#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */ -#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */ -#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */ -#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */ - -#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */ -#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */ -#define XPC_C_CONNECTEDCALLOUT_MADE \ - 0x00000080 /* connected callout completed */ -#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */ -#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */ - -#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */ -#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */ -#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */ -#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */ - -#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */ -#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */ -#define XPC_C_DISCONNECTINGCALLOUT \ - 0x00010000 /* disconnecting callout initiated */ -#define XPC_C_DISCONNECTINGCALLOUT_MADE \ - 0x00020000 /* disconnecting callout completed */ -#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */ - - - -/* - * Manages channels on a partition basis. There is one of these structures - * for each partition (a partition will never utilize the structure that - * represents itself). - */ -struct xpc_partition { - - /* XPC HB infrastructure */ - - u8 remote_rp_version; /* version# of partition's rsvd pg */ - struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */ - u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ - u64 remote_vars_pa; /* phys addr of partition's vars */ - u64 remote_vars_part_pa; /* phys addr of partition's vars part */ - u64 last_heartbeat; /* HB at last read */ - u64 remote_amos_page_pa; /* phys addr of partition's amos page */ - int remote_act_nasid; /* active part's act/deact nasid */ - int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */ - u32 act_IRQ_rcvd; /* IRQs since activation */ - spinlock_t act_lock; /* protect updating of act_state */ - u8 act_state; /* from XPC HB viewpoint */ - u8 remote_vars_version; /* version# of partition's vars */ - enum xpc_retval reason; /* reason partition is deactivating */ - int reason_line; /* line# deactivation initiated from */ - int reactivate_nasid; /* nasid in partition to reactivate */ - - unsigned long disengage_request_timeout; /* timeout in jiffies */ - struct timer_list disengage_request_timer; - - - /* XPC infrastructure referencing and teardown control */ - - volatile u8 setup_state; /* infrastructure setup state */ - wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ - atomic_t references; /* #of references to infrastructure */ - - - /* - * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN - * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION - * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE - * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.) - */ - - - u8 nchannels; /* #of defined channels supported */ - atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ - atomic_t nchannels_engaged;/* #of channels engaged with remote part */ - struct xpc_channel *channels;/* array of channel structures */ - - void *local_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *local_GPs; /* local Get/Put values */ - void *remote_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *remote_GPs;/* copy of remote partition's local Get/Put */ - /* values */ - u64 remote_GPs_pa; /* phys address of remote partition's local */ - /* Get/Put values */ - - - /* fields used to pass args when opening or closing a channel */ - - void *local_openclose_args_base; /* base address of kmalloc'd space */ - struct xpc_openclose_args *local_openclose_args; /* local's args */ - void *remote_openclose_args_base; /* base address of kmalloc'd space */ - struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ - /* args */ - u64 remote_openclose_args_pa; /* phys addr of remote's args */ - - - /* IPI sending, receiving and handling related fields */ - - int remote_IPI_nasid; /* nasid of where to send IPIs */ - int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ - AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ - - AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ - u64 local_IPI_amo; /* IPI amo flags yet to be handled */ - char IPI_owner[8]; /* IPI owner's name */ - struct timer_list dropped_IPI_timer; /* dropped IPI timer */ - - spinlock_t IPI_lock; /* IPI handler lock */ - - - /* channel manager related fields */ - - atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */ - wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */ - -} ____cacheline_aligned; - - -/* struct xpc_partition act_state values (for XPC HB) */ - -#define XPC_P_INACTIVE 0x00 /* partition is not active */ -#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */ -#define XPC_P_ACTIVATING 0x02 /* activation thread started */ -#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */ -#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */ - - -#define XPC_DEACTIVATE_PARTITION(_p, _reason) \ - xpc_deactivate_partition(__LINE__, (_p), (_reason)) - - -/* struct xpc_partition setup_state values */ - -#define XPC_P_UNSET 0x00 /* infrastructure was never setup */ -#define XPC_P_SETUP 0x01 /* infrastructure is setup */ -#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ -#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ - - - -/* - * struct xpc_partition IPI_timer #of seconds to wait before checking for - * dropped IPIs. These occur whenever an IPI amo write doesn't complete until - * after the IPI was received. - */ -#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) - - -/* number of seconds to wait for other partitions to disengage */ -#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 - -/* interval in seconds to print 'waiting disengagement' messages */ -#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 - - -#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0])) - - - -/* found in xp_main.c */ -extern struct xpc_registration xpc_registrations[]; - - -/* found in xpc_main.c */ -extern struct device *xpc_part; -extern struct device *xpc_chan; -extern int xpc_disengage_request_timelimit; -extern int xpc_disengage_request_timedout; -extern irqreturn_t xpc_notify_IRQ_handler(int, void *); -extern void xpc_dropped_IPI_check(struct xpc_partition *); -extern void xpc_activate_partition(struct xpc_partition *); -extern void xpc_activate_kthreads(struct xpc_channel *, int); -extern void xpc_create_kthreads(struct xpc_channel *, int, int); -extern void xpc_disconnect_wait(int); - - -/* found in xpc_partition.c */ -extern int xpc_exiting; -extern struct xpc_vars *xpc_vars; -extern struct xpc_rsvd_page *xpc_rsvd_page; -extern struct xpc_vars_part *xpc_vars_part; -extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; -extern char *xpc_remote_copy_buffer; -extern void *xpc_remote_copy_buffer_base; -extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); -extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); -extern void xpc_allow_IPI_ops(void); -extern void xpc_restrict_IPI_ops(void); -extern int xpc_identify_act_IRQ_sender(void); -extern int xpc_partition_disengaged(struct xpc_partition *); -extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *); -extern void xpc_mark_partition_inactive(struct xpc_partition *); -extern void xpc_discovery(void); -extern void xpc_check_remote_hb(void); -extern void xpc_deactivate_partition(const int, struct xpc_partition *, - enum xpc_retval); -extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *); - - -/* found in xpc_channel.c */ -extern void xpc_initiate_connect(int); -extern void xpc_initiate_disconnect(int); -extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **); -extern enum xpc_retval xpc_initiate_send(partid_t, int, void *); -extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *, - xpc_notify_func, void *); -extern void xpc_initiate_received(partid_t, int, void *); -extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *); -extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *); -extern void xpc_process_channel_activity(struct xpc_partition *); -extern void xpc_connected_callout(struct xpc_channel *); -extern void xpc_deliver_msg(struct xpc_channel *); -extern void xpc_disconnect_channel(const int, struct xpc_channel *, - enum xpc_retval, unsigned long *); -extern void xpc_disconnect_callout(struct xpc_channel *, enum xpc_retval); -extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval); -extern void xpc_teardown_infrastructure(struct xpc_partition *); - - - -static inline void -xpc_wakeup_channel_mgr(struct xpc_partition *part) -{ - if (atomic_inc_return(&part->channel_mgr_requests) == 1) { - wake_up(&part->channel_mgr_wq); - } -} - - - -/* - * These next two inlines are used to keep us from tearing down a channel's - * msg queues while a thread may be referencing them. - */ -static inline void -xpc_msgqueue_ref(struct xpc_channel *ch) -{ - atomic_inc(&ch->references); -} - -static inline void -xpc_msgqueue_deref(struct xpc_channel *ch) -{ - s32 refs = atomic_dec_return(&ch->references); - - DBUG_ON(refs < 0); - if (refs == 0) { - xpc_wakeup_channel_mgr(&xpc_partitions[ch->partid]); - } -} - - - -#define XPC_DISCONNECT_CHANNEL(_ch, _reason, _irqflgs) \ - xpc_disconnect_channel(__LINE__, _ch, _reason, _irqflgs) - - -/* - * These two inlines are used to keep us from tearing down a partition's - * setup infrastructure while a thread may be referencing it. - */ -static inline void -xpc_part_deref(struct xpc_partition *part) -{ - s32 refs = atomic_dec_return(&part->references); - - - DBUG_ON(refs < 0); - if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) { - wake_up(&part->teardown_wq); - } -} - -static inline int -xpc_part_ref(struct xpc_partition *part) -{ - int setup; - - - atomic_inc(&part->references); - setup = (part->setup_state == XPC_P_SETUP); - if (!setup) { - xpc_part_deref(part); - } - return setup; -} - - - -/* - * The following macro is to be used for the setting of the reason and - * reason_line fields in both the struct xpc_channel and struct xpc_partition - * structures. - */ -#define XPC_SET_REASON(_p, _reason, _line) \ - { \ - (_p)->reason = _reason; \ - (_p)->reason_line = _line; \ - } - - - -/* - * This next set of inlines are used to keep track of when a partition is - * potentially engaged in accessing memory belonging to another partition. - */ - -static inline void -xpc_mark_partition_engaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); - - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_mark_partition_disengaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); - - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_request_partition_disengage(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_cancel_partition_disengage_request(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline u64 -xpc_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline u64 -xpc_partition_disengage_requested(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline void -xpc_clear_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, - ~partid_mask); -} - -static inline void -xpc_clear_partition_disengage_request(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND, - ~partid_mask); -} - - - -/* - * The following set of macros and inlines are used for the sending and - * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, - * one that is associated with partition activity (SGI_XPC_ACTIVATE) and - * the other that is associated with channel activity (SGI_XPC_NOTIFY). - */ - -static inline u64 -xpc_IPI_receive(AMO_t *amo) -{ - return FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_CLEAR); -} - - -static inline enum xpc_retval -xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) -{ - int ret = 0; - unsigned long irq_flags; - - - local_irq_save(irq_flags); - - FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, flag); - sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); - - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - ret = xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); - - return ((ret == 0) ? xpcSuccess : xpcPioReadError); -} - - -/* - * IPIs associated with SGI_XPC_ACTIVATE IRQ. - */ - -/* - * Flag the appropriate AMO variable and send an IPI to the specified node. - */ -static inline void -xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, - int to_phys_cpuid) -{ - int w_index = XPC_NASID_W_INDEX(from_nasid); - int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *) __va(amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); - - - (void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, - to_phys_cpuid, SGI_XPC_ACTIVATE); -} - -static inline void -xpc_IPI_send_activate(struct xpc_vars *vars) -{ - xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0), - vars->act_nasid, vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_activated(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, part->remote_act_phys_cpuid); -} - -static inline void -xpc_IPI_send_reactivate(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid, - xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_disengage(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, part->remote_act_phys_cpuid); -} - - -/* - * IPIs associated with SGI_XPC_NOTIFY IRQ. - */ - -/* - * Send an IPI to the remote partition that is associated with the - * specified channel. - */ -#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \ - xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f) - -static inline void -xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string, - unsigned long *irq_flags) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - enum xpc_retval ret; - - - if (likely(part->act_state != XPC_P_DEACTIVATING)) { - ret = xpc_IPI_send(part->remote_IPI_amo_va, - (u64) ipi_flag << (ch->number * 8), - part->remote_IPI_nasid, - part->remote_IPI_phys_cpuid, - SGI_XPC_NOTIFY); - dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", - ipi_flag_string, ch->partid, ch->number, ret); - if (unlikely(ret != xpcSuccess)) { - if (irq_flags != NULL) { - spin_unlock_irqrestore(&ch->lock, *irq_flags); - } - XPC_DEACTIVATE_PARTITION(part, ret); - if (irq_flags != NULL) { - spin_lock_irqsave(&ch->lock, *irq_flags); - } - } - } -} - - -/* - * Make it look like the remote partition, which is associated with the - * specified channel, sent us an IPI. This faked IPI will be handled - * by xpc_dropped_IPI_check(). - */ -#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \ - xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f) - -static inline void -xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, - char *ipi_flag_string) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - - - FETCHOP_STORE_OP(TO_AMO((u64) &part->local_IPI_amo_va->variable), - FETCHOP_OR, ((u64) ipi_flag << (ch->number * 8))); - dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", - ipi_flag_string, ch->partid, ch->number); -} - - -/* - * The sending and receiving of IPIs includes the setting of an AMO variable - * to indicate the reason the IPI was sent. The 64-bit variable is divided - * up into eight bytes, ordered from right to left. Byte zero pertains to - * channel 0, byte one to channel 1, and so on. Each byte is described by - * the following IPI flags. - */ - -#define XPC_IPI_CLOSEREQUEST 0x01 -#define XPC_IPI_CLOSEREPLY 0x02 -#define XPC_IPI_OPENREQUEST 0x04 -#define XPC_IPI_OPENREPLY 0x08 -#define XPC_IPI_MSGREQUEST 0x10 - - -/* given an AMO variable and a channel#, get its associated IPI flags */ -#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) -#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) - -#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & __IA64_UL_CONST(0x0f0f0f0f0f0f0f0f)) -#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & __IA64_UL_CONST(0x1010101010101010)) - - -static inline void -xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - - args->reason = ch->reason; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - - args->msg_size = ch->msg_size; - args->local_nentries = ch->local_nentries; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - - args->remote_nentries = ch->remote_nentries; - args->local_nentries = ch->local_nentries; - args->local_msgqueue_pa = __pa(ch->local_msgqueue); - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL); -} - -static inline void -xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST); -} - - -/* - * Memory for XPC's AMO variables is allocated by the MSPEC driver. These - * pages are located in the lowest granule. The lowest granule uses 4k pages - * for cached references and an alternate TLB handler to never provide a - * cacheable mapping for the entire region. This will prevent speculative - * reading of cached copies of our lines from being issued which will cause - * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an - * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition - * activation and 2 AMO variables for partition deactivation. - */ -static inline AMO_t * -xpc_IPI_init(int index) -{ - AMO_t *amo = xpc_vars->amos_page + index; - - - (void) xpc_IPI_receive(amo); /* clear AMO variable */ - return amo; -} - - - -static inline enum xpc_retval -xpc_map_bte_errors(bte_result_t error) -{ - if (error == BTE_SUCCESS) - return xpcSuccess; - - if (is_shub2()) { - if (BTE_VALID_SH2_ERROR(error)) - return xpcBteSh2Start + error; - return xpcBteUnmappedError; - } - switch (error) { - case BTE_SUCCESS: return xpcSuccess; - case BTEFAIL_DIR: return xpcBteDirectoryError; - case BTEFAIL_POISON: return xpcBtePoisonError; - case BTEFAIL_WERR: return xpcBteWriteError; - case BTEFAIL_ACCESS: return xpcBteAccessError; - case BTEFAIL_PWERR: return xpcBtePWriteError; - case BTEFAIL_PRERR: return xpcBtePReadError; - case BTEFAIL_TOUT: return xpcBteTimeOutError; - case BTEFAIL_XTERR: return xpcBteXtalkError; - case BTEFAIL_NOTAVAIL: return xpcBteNotAvailable; - default: return xpcBteUnmappedError; - } -} - - - -/* - * Check to see if there is any channel activity to/from the specified - * partition. - */ -static inline void -xpc_check_for_channel_activity(struct xpc_partition *part) -{ - u64 IPI_amo; - unsigned long irq_flags; - - - IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va); - if (IPI_amo == 0) { - return; - } - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - part->local_IPI_amo |= IPI_amo; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", - XPC_PARTID(part), IPI_amo); - - xpc_wakeup_channel_mgr(part); -} - - -#endif /* _ASM_IA64_SN_XPC_H */ - diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h index 2d67b72..f2f72ef 100644 --- a/include/asm-ia64/topology.h +++ b/include/asm-ia64/topology.h @@ -93,7 +93,7 @@ void build_cpu_to_node_map(void); .cache_nice_tries = 2, \ .busy_idx = 3, \ .idle_idx = 2, \ - .newidle_idx = 0, /* unused */ \ + .newidle_idx = 2, \ .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ @@ -116,6 +116,11 @@ void build_cpu_to_node_map(void); #define smt_capable() (smp_num_siblings > 1) #endif +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) + #include <asm-generic/topology.h> #endif /* _ASM_IA64_TOPOLOGY_H */ diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 5f640e5..7381916 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -1,5 +1,6 @@ include include/asm-generic/Kbuild.asm +header-y += a.out.h header-y += auxvec.h header-y += ioctls.h header-y += mman.h @@ -23,7 +24,6 @@ header-y += sigcontext.h header-y += statfs.h header-y += ps3fb.h -unifdef-y += a.out.h unifdef-y += asm-compat.h unifdef-y += bootx.h unifdef-y += byteorder.h diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h index 4aa2207..98324c5 100644 --- a/include/asm-powerpc/abs_addr.h +++ b/include/asm-powerpc/abs_addr.h @@ -12,10 +12,11 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/lmb.h> + #include <asm/types.h> #include <asm/page.h> #include <asm/prom.h> -#include <asm/lmb.h> #include <asm/firmware.h> struct mschunks_map { diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h index 220d9a7..a99a749 100644 --- a/include/asm-powerpc/bitops.h +++ b/include/asm-powerpc/bitops.h @@ -312,24 +312,26 @@ static __inline__ int fls(unsigned int x) asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); return 32 - lz; } + +/* + * 64-bit can do this using one cntlzd (count leading zeroes doubleword) + * instruction; for 32-bit we use the generic version, which does two + * 32-bit fls calls. + */ +#ifdef __powerpc64__ +static __inline__ int fls64(__u64 x) +{ + int lz; + + asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); + return 64 - lz; +} +#else #include <asm-generic/bitops/fls64.h> +#endif /* __powerpc64__ */ #include <asm-generic/bitops/hweight.h> - -#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0) -unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); -/** - * find_first_bit - find the first set bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first set bit, not the number of the byte - * containing a bit. - */ -#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) -unsigned long find_next_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); +#include <asm-generic/bitops/find.h> /* Little-endian versions */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index 77e39da..ede38ffe 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -4,6 +4,20 @@ #include <linux/compiler.h> #include <linux/types.h> +/* Opcodes common to CPM1 and CPM2 +*/ +#define CPM_CR_INIT_TRX ((ushort)0x0000) +#define CPM_CR_INIT_RX ((ushort)0x0001) +#define CPM_CR_INIT_TX ((ushort)0x0002) +#define CPM_CR_HUNT_MODE ((ushort)0x0003) +#define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_RESTART_TX ((ushort)0x0006) +#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) +#define CPM_CR_SET_GADDR ((ushort)0x0008) +#define CPM_CR_SET_TIMER ((ushort)0x0008) +#define CPM_CR_STOP_IDMA ((ushort)0x000b) + /* Buffer descriptors used by many of the CPM protocols. */ typedef struct cpm_buf_desc { ushort cbd_sc; /* Status and Control */ diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h index b2ebd6a..3df4396 100644 --- a/include/asm-powerpc/cpm1.h +++ b/include/asm-powerpc/cpm1.h @@ -28,19 +28,6 @@ #define CPM_CR_CHAN ((ushort)0x00f0) #define CPM_CR_FLG ((ushort)0x0001) -/* Some commands (there are more...later) -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR - /* Channel numbers. */ #define CPM_CR_CH_SCC1 ((ushort)0x0000) diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index b93a53e..4c85ed9 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -71,18 +71,9 @@ #define CPM_CR_FCC_PAGE(x) (x + 0x04) -/* Some opcodes (there are more...later) +/* CPM2-specific opcodes (see cpm.h for common opcodes) */ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_SET_GADDR ((ushort)0x0008) #define CPM_CR_START_IDMA ((ushort)0x0009) -#define CPM_CR_STOP_IDMA ((ushort)0x000b) #define mk_cr_cmd(PG, SBC, MCN, OP) \ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h index 8485c28..fb11b0c 100644 --- a/include/asm-powerpc/cputhreads.h +++ b/include/asm-powerpc/cputhreads.h @@ -35,7 +35,7 @@ static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) res = CPU_MASK_NONE; for (i = 0; i < NR_CPUS; i += threads_per_core) { - cpus_shift_right(tmp, threads_core_mask, i); + cpus_shift_left(tmp, threads_core_mask, i); if (cpus_intersects(threads, tmp)) cpu_set(i, res); } diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index be6c879..f8398ce 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -82,6 +82,19 @@ static inline void __mtdcri(int base_addr, int base_data, int reg, spin_unlock_irqrestore(&dcr_ind_lock, flags); } +static inline void __dcri_clrset(int base_addr, int base_data, int reg, + unsigned clr, unsigned set) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + __mtdcr(base_addr, reg); + val = (__mfdcr(base_data) & ~clr) | set; + __mtdcr(base_data, val); + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + #define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ DCRN_ ## base ## _CONFIG_DATA, \ reg) @@ -90,6 +103,10 @@ static inline void __mtdcri(int base_addr, int base_data, int reg, DCRN_ ## base ## _CONFIG_DATA, \ reg, data) +#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, clr, set) + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h index 9f1fb98..29b0ece 100644 --- a/include/asm-powerpc/dcr-regs.h +++ b/include/asm-powerpc/dcr-regs.h @@ -68,4 +68,82 @@ #define SDR0_UART3 0x0123 #define SDR0_CUST0 0x4000 +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_SRAM0_SB0CR 0x00 +#define DCRN_SRAM0_SB1CR 0x01 +#define DCRN_SRAM0_SB2CR 0x02 +#define DCRN_SRAM0_SB3CR 0x03 +#define SRAM_SBCR_BU_MASK 0x00000180 +#define SRAM_SBCR_BS_64KB 0x00000800 +#define SRAM_SBCR_BU_RO 0x00000080 +#define SRAM_SBCR_BU_RW 0x00000180 +#define DCRN_SRAM0_BEAR 0x04 +#define DCRN_SRAM0_BESR0 0x05 +#define DCRN_SRAM0_BESR1 0x06 +#define DCRN_SRAM0_PMEG 0x07 +#define DCRN_SRAM0_CID 0x08 +#define DCRN_SRAM0_REVID 0x09 +#define DCRN_SRAM0_DPC 0x0a +#define SRAM_DPC_ENABLE 0x80000000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_L2C0_CFG 0x00 +#define L2C_CFG_L2M 0x80000000 +#define L2C_CFG_ICU 0x40000000 +#define L2C_CFG_DCU 0x20000000 +#define L2C_CFG_DCW_MASK 0x1e000000 +#define L2C_CFG_TPC 0x01000000 +#define L2C_CFG_CPC 0x00800000 +#define L2C_CFG_FRAN 0x00200000 +#define L2C_CFG_SS_MASK 0x00180000 +#define L2C_CFG_SS_256 0x00000000 +#define L2C_CFG_CPIM 0x00040000 +#define L2C_CFG_TPIM 0x00020000 +#define L2C_CFG_LIM 0x00010000 +#define L2C_CFG_PMUX_MASK 0x00007000 +#define L2C_CFG_PMUX_SNP 0x00000000 +#define L2C_CFG_PMUX_IF 0x00001000 +#define L2C_CFG_PMUX_DF 0x00002000 +#define L2C_CFG_PMUX_DS 0x00003000 +#define L2C_CFG_PMIM 0x00000800 +#define L2C_CFG_TPEI 0x00000400 +#define L2C_CFG_CPEI 0x00000200 +#define L2C_CFG_NAM 0x00000100 +#define L2C_CFG_SMCM 0x00000080 +#define L2C_CFG_NBRM 0x00000040 +#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ +#define DCRN_L2C0_CMD 0x01 +#define L2C_CMD_CLR 0x80000000 +#define L2C_CMD_DIAG 0x40000000 +#define L2C_CMD_INV 0x20000000 +#define L2C_CMD_CCP 0x10000000 +#define L2C_CMD_CTE 0x08000000 +#define L2C_CMD_STRC 0x04000000 +#define L2C_CMD_STPC 0x02000000 +#define L2C_CMD_RPMC 0x01000000 +#define L2C_CMD_HCC 0x00800000 +#define DCRN_L2C0_ADDR 0x02 +#define DCRN_L2C0_DATA 0x03 +#define DCRN_L2C0_SR 0x04 +#define L2C_SR_CC 0x80000000 +#define L2C_SR_CPE 0x40000000 +#define L2C_SR_TPE 0x20000000 +#define L2C_SR_LRU 0x10000000 +#define L2C_SR_PCS 0x08000000 +#define DCRN_L2C0_REVID 0x05 +#define DCRN_L2C0_SNP0 0x06 +#define DCRN_L2C0_SNP1 0x07 +#define L2C_SNP_BA_MASK 0xffff0000 +#define L2C_SNP_SSR_MASK 0x0000f000 +#define L2C_SNP_SSR_32G 0x0000f000 +#define L2C_SNP_ESR 0x00000800 + #endif /* __DCR_REGS_H__ */ diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h index 39abdb0..329148b 100644 --- a/include/asm-powerpc/exception.h +++ b/include/asm-powerpc/exception.h @@ -228,18 +228,18 @@ label##_pSeries: \ BEGIN_FW_FTR_SECTION; \ stb r11,PACAHARDIRQEN(r13); \ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ + TRACE_DISABLE_INTS; \ BEGIN_FW_FTR_SECTION; \ mfmsr r10; \ ori r10,r10,MSR_EE; \ mtmsrd r10,1; \ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - #else #define DISABLE_INTS \ li r11,0; \ stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13) - + stb r11,PACAHARDIRQEN(r13); \ + TRACE_DISABLE_INTS #endif /* CONFIG_PPC_ISERIES */ #define ENABLE_INTS \ diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h new file mode 100644 index 0000000..303f548 --- /dev/null +++ b/include/asm-powerpc/fsl_lbc.h @@ -0,0 +1,311 @@ +/* Freescale Local Bus Controller + * + * Copyright (c) 2006-2007 Freescale Semiconductor + * + * Authors: Nick Spence <nick.spence@freescale.com>, + * Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_FSL_LBC_H +#define __ASM_FSL_LBC_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <asm/io.h> + +struct fsl_lbc_bank { + __be32 br; /**< Base Register */ +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ +#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ +#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) + + __be32 or; /**< Base Register */ +#define OR0 0x5004 +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 +}; + +struct fsl_lbc_regs { + struct fsl_lbc_bank bank[8]; + u8 res0[0x28]; + __be32 mar; /**< UPM Address Register */ + u8 res1[0x4]; + __be32 mamr; /**< UPMA Mode Register */ +#define MxMR_OP_NO (0 << 28) /**< normal operation */ +#define MxMR_OP_WA (1 << 28) /**< write array */ +#define MxMR_OP_RA (2 << 28) /**< read array */ +#define MxMR_OP_RP (3 << 28) /**< run pattern */ +#define MxMR_MAD 0x3f /**< machine address */ + __be32 mbmr; /**< UPMB Mode Register */ + __be32 mcmr; /**< UPMC Mode Register */ + u8 res2[0x8]; + __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + __be32 mdr; /**< UPM Data Register */ + u8 res3[0x4]; + __be32 lsor; /**< Special Operation Initiation Register */ + __be32 lsdmr; /**< SDRAM Mode Register */ + u8 res4[0x8]; + __be32 lurt; /**< UPM Refresh Timer */ + __be32 lsrt; /**< SDRAM Refresh Timer */ + u8 res5[0x8]; + __be32 ltesr; /**< Transfer Error Status Register */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_CC 0x00000001 +#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) + __be32 ltedr; /**< Transfer Error Disable Register */ + __be32 lteir; /**< Transfer Error Interrupt Register */ + __be32 lteatr; /**< Transfer Error Attributes Register */ + __be32 ltear; /**< Transfer Error Address Register */ + u8 res6[0xC]; + __be32 lbcr; /**< Configuration Register */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_AHD 0x00200000 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 +#define LBCR_INIT 0x00040000 + __be32 lcrr; /**< Clock Ratio Register */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 + u8 res7[0x8]; + __be32 fmr; /**< Flash Mode Register */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + __be32 fir; /**< Flash Instruction Register */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ + __be32 fcr; /**< Flash Command Register */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + __be32 fbar; /**< Flash Block Address Register */ +#define FBAR_BLK 0x00FFFFFF + __be32 fpar; /**< Flash Page Address Register */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + __be32 fbcr; /**< Flash Byte Count Register */ +#define FBCR_BC 0x00000FFF + u8 res11[0x8]; + u8 res8[0xF00]; +}; + +extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; +extern spinlock_t fsl_lbc_lock; + +/* + * FSL UPM routines + */ +struct fsl_upm { + __be32 __iomem *mxmr; + int width; +}; + +extern int fsl_lbc_find(phys_addr_t addr_base); +extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); + +/** + * fsl_upm_start_pattern - start UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @pat_offset: UPM pattern offset for the command to be executed + * + * This routine programmes UPM so the next memory access that hits an UPM + * will trigger pattern execution, starting at pat_offset. + */ +static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) +{ + clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); +} + +/** + * fsl_upm_end_pattern - end UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * + * This routine reverts UPM to normal operation mode. + */ +static inline void fsl_upm_end_pattern(struct fsl_upm *upm) +{ + clrbits32(upm->mxmr, MxMR_OP_RP); + + while (in_be32(upm->mxmr) & MxMR_OP_RP) + cpu_relax(); +} + +/** + * fsl_upm_run_pattern - actually run an UPM pattern + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @io_base: remapped pointer to where memory access should happen + * @mar: MAR register content during pattern execution + * + * This function triggers dummy write to the memory specified by the io_base, + * thus UPM pattern actually executed. Note that mar usage depends on the + * pre-programmed AMX bits in the UPM RAM. + */ +static inline int fsl_upm_run_pattern(struct fsl_upm *upm, + void __iomem *io_base, u32 mar) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fsl_lbc_lock, flags); + + out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); + + switch (upm->width) { + case 8: + out_8(io_base, 0x0); + break; + case 16: + out_be16(io_base, 0x0); + break; + case 32: + out_be32(io_base, 0x0); + break; + default: + ret = -EINVAL; + break; + } + + spin_unlock_irqrestore(&fsl_lbc_lock, flags); + + return ret; +} + +#endif /* __ASM_FSL_LBC_H */ diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h new file mode 100644 index 0000000..77ad3a8 --- /dev/null +++ b/include/asm-powerpc/gpio.h @@ -0,0 +1,56 @@ +/* + * Generic GPIO API implementation for PowerPC. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_POWERPC_GPIO_H +#define __ASM_POWERPC_GPIO_H + +#include <linux/errno.h> +#include <asm-generic/gpio.h> + +#ifdef CONFIG_HAVE_GPIO_LIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +/* + * Not implemented, yet. + */ +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_HAVE_GPIO_LIB */ + +#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index a7b60bf..ad8c9f7 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -27,7 +27,7 @@ static inline unsigned long local_get_flags(void) return flags; } -static inline unsigned long local_irq_disable(void) +static inline unsigned long raw_local_irq_disable(void) { unsigned long flags, zero; @@ -39,14 +39,15 @@ static inline unsigned long local_irq_disable(void) return flags; } -extern void local_irq_restore(unsigned long); +extern void raw_local_irq_restore(unsigned long); extern void iseries_handle_interrupts(void); -#define local_irq_enable() local_irq_restore(1) -#define local_save_flags(flags) ((flags) = local_get_flags()) -#define local_irq_save(flags) ((flags) = local_irq_disable()) +#define raw_local_irq_enable() raw_local_irq_restore(1) +#define raw_local_save_flags(flags) ((flags) = local_get_flags()) +#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) -#define irqs_disabled() (local_get_flags() == 0) +#define raw_irqs_disabled() (local_get_flags() == 0) +#define raw_irqs_disabled_flags(flags) ((flags) == 0) #define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h index 82a4526..7b6f411 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/include/asm-powerpc/immap_qe.h @@ -20,6 +20,7 @@ #ifdef __KERNEL__ #include <linux/kernel.h> +#include <asm/io.h> #define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ @@ -468,7 +469,7 @@ struct qe_immap { u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ } __attribute__ ((packed)); -extern struct qe_immap *qe_immr; +extern struct qe_immap __iomem *qe_immr; extern phys_addr_t get_qe_base(void); static inline unsigned long immrbar_virt_to_phys(void *address) diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h index 7970cba..cc6fdba 100644 --- a/include/asm-powerpc/irqflags.h +++ b/include/asm-powerpc/irqflags.h @@ -2,30 +2,43 @@ * include/asm-powerpc/irqflags.h * * IRQ flags handling - * - * This file gets included from lowlevel asm headers too, to provide - * wrapped versions of the local_irq_*() APIs, based on the - * raw_local_irq_*() macros from the lowlevel headers. */ #ifndef _ASM_IRQFLAGS_H #define _ASM_IRQFLAGS_H +#ifndef __ASSEMBLY__ /* * Get definitions for raw_local_save_flags(x), etc. */ #include <asm-powerpc/hw_irq.h> +#else +#ifdef CONFIG_TRACE_IRQFLAGS /* - * Do the CPU's IRQ-state tracing from assembly code. We call a - * C function, so save all the C-clobbered registers: + * Most of the CPU's IRQ-state tracing is done from assembly code; we + * have to call a C function so call a wrapper that saves all the + * C-clobbered registers. */ -#ifdef CONFIG_TRACE_IRQFLAGS - -#error No support on PowerPC yet for CONFIG_TRACE_IRQFLAGS - +#define TRACE_ENABLE_INTS bl .trace_hardirqs_on +#define TRACE_DISABLE_INTS bl .trace_hardirqs_off +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ + cmpdi en, 0; \ + bne 95f; \ + stb en,PACASOFTIRQEN(r13); \ + bl .trace_hardirqs_off; \ + b skip; \ +95: bl .trace_hardirqs_on; \ + li en,1; +#define TRACE_AND_RESTORE_IRQ(en) \ + TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ +96: stb en,PACASOFTIRQEN(r13) #else -# define TRACE_IRQS_ON -# define TRACE_IRQS_OFF +#define TRACE_ENABLE_INTS +#define TRACE_DISABLE_INTS +#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) +#define TRACE_AND_RESTORE_IRQ(en) \ + stb en,PACASOFTIRQEN(r13) +#endif #endif #endif diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h new file mode 100644 index 0000000..c0cce67 --- /dev/null +++ b/include/asm-powerpc/iseries/alpaca.h @@ -0,0 +1,31 @@ +/* + * Copyright © 2008 Stephen Rothwell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_POWERPC_ISERIES_ALPACA_H +#define _ASM_POWERPC_ISERIES_ALPACA_H + +/* + * This is the part of the paca that the iSeries hypervisor + * needs to be statically initialised. Immediately after boot + * we switch to the normal Linux paca. + */ +struct alpaca { + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ + const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ +}; + +#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/include/asm-powerpc/iseries/it_lp_reg_save.h b/include/asm-powerpc/iseries/it_lp_reg_save.h deleted file mode 100644 index 5403b75..0000000 --- a/include/asm-powerpc/iseries/it_lp_reg_save.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H -#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H - -/* - * This control block contains the data that is shared between PLIC - * and the OS - */ - -struct ItLpRegSave { - u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003 - u16 xSize; // Size of this class 004-005 - u8 xInUse; // Area is live 006-007 - u8 xRsvd1[9]; // Reserved 007-00F - - u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F - u32 xCTRL; // Control Register 170-173 - u32 xDEC; // Decrementer 174-177 - u32 xFPSCR; // FP Status and Control Reg 178-17B - u32 xPVR; // Processor Version Number 17C-17F - - u64 xMMCR0; // Monitor Mode Control Reg 0 180-187 - u32 xPMC1; // Perf Monitor Counter 1 188-18B - u32 xPMC2; // Perf Monitor Counter 2 18C-18F - u32 xPMC3; // Perf Monitor Counter 3 190-193 - u32 xPMC4; // Perf Monitor Counter 4 194-197 - u32 xPIR; // Processor ID Reg 198-19B - - u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F - u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3 - u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7 - u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB - u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF - u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3 - u32 xTSC; // Thread Switch Control 1B4-1B7 - u32 xTST; // Thread Switch Timeout 1B8-1BB - u32 xRsvd; // Reserved 1BC-1BF - - u64 xACCR; // Address Compare Control Reg 1C0-1C7 - u64 xIMR; // Instruction Match Register 1C8-1CF - u64 xSDR1; // Storage Description Reg 1 1D0-1D7 - u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF - u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7 - u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF - u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7 - u64 xTB; // Time Base Register 1F8-1FF - - u64 xFPR[32]; // Floating Point Registers 200-2FF - - u64 xMSR; // Machine State Register 300-307 - u64 xNIA; // Next Instruction Address 308-30F - - u64 xDABR; // Data Address Breakpoint Reg 310-317 - u64 xIABR; // Inst Address Breakpoint Reg 318-31F - - u64 xHID0; // HW Implementation Dependent0 320-327 - - u64 xHID4; // HW Implementation Dependent4 328-32F - u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337 - u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F - u64 xSDAR; // Sample Data Address Register 340-347 - u64 xSIAR; // Sample Inst Address Register 348-34F - - u8 xRsvd3[176]; // Reserved 350-3FF -}; - -extern struct ItLpRegSave iseries_reg_save[]; - -#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */ diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h index 5d1dc48..6f5fdf0 100644 --- a/include/asm-powerpc/lmb.h +++ b/include/asm-powerpc/lmb.h @@ -1,81 +1,15 @@ #ifndef _ASM_POWERPC_LMB_H #define _ASM_POWERPC_LMB_H -#ifdef __KERNEL__ -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 2001 Peter Bergner, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ +#include <asm/udbg.h> -#include <linux/init.h> -#include <asm/prom.h> +#define LMB_DBG(fmt...) udbg_printf(fmt) -#define MAX_LMB_REGIONS 128 +#ifdef CONFIG_PPC32 +extern phys_addr_t lowmem_end_addr; +#define LMB_REAL_LIMIT lowmem_end_addr +#else +#define LMB_REAL_LIMIT 0 +#endif -struct lmb_property { - unsigned long base; - unsigned long size; -}; - -struct lmb_region { - unsigned long cnt; - unsigned long size; - struct lmb_property region[MAX_LMB_REGIONS+1]; -}; - -struct lmb { - unsigned long debug; - unsigned long rmo_size; - struct lmb_region memory; - struct lmb_region reserved; -}; - -extern struct lmb lmb; - -extern void __init lmb_init(void); -extern void __init lmb_analyze(void); -extern long __init lmb_add(unsigned long base, unsigned long size); -extern long __init lmb_reserve(unsigned long base, unsigned long size); -extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align); -extern unsigned long __init lmb_alloc_base(unsigned long size, - unsigned long align, unsigned long max_addr); -extern unsigned long __init __lmb_alloc_base(unsigned long size, - unsigned long align, unsigned long max_addr); -extern unsigned long __init lmb_phys_mem_size(void); -extern unsigned long __init lmb_end_of_DRAM(void); -extern void __init lmb_enforce_memory_limit(unsigned long memory_limit); -extern int __init lmb_is_reserved(unsigned long addr); - -extern void lmb_dump_all(void); - -static inline unsigned long -lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) -{ - return type->region[region_nr].size; -} -static inline unsigned long -lmb_size_pages(struct lmb_region *type, unsigned long region_nr) -{ - return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT; -} -static inline unsigned long -lmb_start_pfn(struct lmb_region *type, unsigned long region_nr) -{ - return type->region[region_nr].base >> PAGE_SHIFT; -} -static inline unsigned long -lmb_end_pfn(struct lmb_region *type, unsigned long region_nr) -{ - return lmb_start_pfn(type, region_nr) + - lmb_size_pages(type, region_nr); -} - -#endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_LMB_H */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 0872ec2..54ed64d 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -68,6 +68,8 @@ struct machdep_calls { unsigned long vflags, int psize, int ssize); long (*hpte_remove)(unsigned long hpte_group); + void (*hpte_removebolted)(unsigned long ea, + int psize, int ssize); void (*flush_hash_range)(unsigned long number, int local); /* special for kexec, to be called in real mode, linar mapping is @@ -196,9 +198,6 @@ struct machdep_calls { May be NULL. */ void (*init)(void); - void (*setup_io_mappings)(void); - - void (*early_serial_map)(void); void (*kgdb_map_scc)(void); /* diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h index 3a6cb1a..079c06e 100644 --- a/include/asm-powerpc/macio.h +++ b/include/asm-powerpc/macio.h @@ -2,7 +2,7 @@ #define __MACIO_ASIC_H__ #ifdef __KERNEL__ -#include <asm/of_device.h> +#include <linux/of_device.h> extern struct bus_type macio_bus_type; diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h index 7d37f77..3d10867 100644 --- a/include/asm-powerpc/mmu-40x.h +++ b/include/asm-powerpc/mmu-40x.h @@ -53,8 +53,6 @@ #ifndef __ASSEMBLY__ -typedef unsigned long phys_addr_t; - typedef struct { unsigned long id; unsigned long vdso_base; diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h index 62772ae..c8b02d9 100644 --- a/include/asm-powerpc/mmu-44x.h +++ b/include/asm-powerpc/mmu-44x.h @@ -53,8 +53,6 @@ #ifndef __ASSEMBLY__ -typedef unsigned long long phys_addr_t; - typedef struct { unsigned long id; unsigned long vdso_base; diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h index 952bd88..9db877e 100644 --- a/include/asm-powerpc/mmu-8xx.h +++ b/include/asm-powerpc/mmu-8xx.h @@ -136,8 +136,6 @@ #define SPRN_M_TW 799 #ifndef __ASSEMBLY__ -typedef unsigned long phys_addr_t; - typedef struct { unsigned long id; unsigned long vdso_base; diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h index 3758000..925d93c 100644 --- a/include/asm-powerpc/mmu-fsl-booke.h +++ b/include/asm-powerpc/mmu-fsl-booke.h @@ -73,12 +73,6 @@ #ifndef __ASSEMBLY__ -#ifndef CONFIG_PHYS_64BIT -typedef unsigned long phys_addr_t; -#else -typedef unsigned long long phys_addr_t; -#endif - typedef struct { unsigned long id; unsigned long vdso_base; diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h index 4bd735b..6e21ca6 100644 --- a/include/asm-powerpc/mmu-hash32.h +++ b/include/asm-powerpc/mmu-hash32.h @@ -84,8 +84,6 @@ typedef struct { unsigned long vdso_base; } mm_context_t; -typedef unsigned long phys_addr_t; - #endif /* !__ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h index 2864fa3..0dff767 100644 --- a/include/asm-powerpc/mmu-hash64.h +++ b/include/asm-powerpc/mmu-hash64.h @@ -469,9 +469,6 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea, VSID_MODULUS_256M) #define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) -/* Physical address used by some IO functions */ -typedef unsigned long phys_addr_t; - #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h index 748b35a..eb61b9c 100644 --- a/include/asm-powerpc/paca.h +++ b/include/asm-powerpc/paca.h @@ -42,10 +42,7 @@ struct task_struct; * Defines the layout of the paca. * * This structure is not directly accessed by firmware or the service - * processor except for the first two pointers that point to the - * lppaca area and the ItLpRegSave area for this CPU. The lppaca - * object is currently contained within the PACA but it doesn't need - * to be. + * processor. */ struct paca_struct { /* @@ -55,14 +52,7 @@ struct paca_struct { * avoid cacheline bouncing. */ - /* - * MAGIC: These first two pointers can't be moved - they're - * accessed by the firmware - */ struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ -#ifdef CONFIG_PPC_ISERIES - void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ -#endif /* CONFIG_PPC_ISERIES */ /* * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h index df47bbb..6c85060 100644 --- a/include/asm-powerpc/page.h +++ b/include/asm-powerpc/page.h @@ -53,6 +53,7 @@ #define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START) #define KERNELBASE (PAGE_OFFSET + PHYSICAL_START) +#define LOAD_OFFSET PAGE_OFFSET #ifdef CONFIG_FLATMEM #define pfn_valid(pfn) ((pfn) < max_mapnr) diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h index 65ea19e..51f8134 100644 --- a/include/asm-powerpc/page_32.h +++ b/include/asm-powerpc/page_32.h @@ -3,8 +3,6 @@ #define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 -#define PPC_MEMSTART 0 - #ifdef CONFIG_NOT_COHERENT_CACHE #define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES #endif diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h index b4526ff..19fd793 100644 --- a/include/asm-powerpc/pasemi_dma.h +++ b/include/asm-powerpc/pasemi_dma.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006 PA Semi, Inc + * Copyright (C) 2006-2008 PA Semi, Inc * * Hardware register layout and descriptor formats for the on-board * DMA engine on PA Semi PWRficient. Used by ethernet, function and security @@ -40,6 +40,11 @@ enum { PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ + PAS_DMA_COM_CFG = 0x114, /* Common config reg */ + PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ + PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ + PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ + PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ }; @@ -123,11 +128,16 @@ enum { #define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 #define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) #define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ +#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ +#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ #define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c #define PAS_DMA_TXCHAN_CFG_TATTR_S 2 #define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ PAS_DMA_TXCHAN_CFG_TATTR_M) -#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0 +#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 +#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 +#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 #define PAS_DMA_TXCHAN_CFG_WT_S 6 #define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ PAS_DMA_TXCHAN_CFG_WT_M) @@ -394,11 +404,62 @@ enum { XCT_COPY_LLEN_M) #define XCT_COPY_SE 0x0000000000000001ull +/* Function descriptor fields */ +#define XCT_FUN_T 0x8000000000000000ull +#define XCT_FUN_ST 0x4000000000000000ull +#define XCT_FUN_RR_M 0x3000000000000000ull +#define XCT_FUN_RR_NORES 0x0000000000000000ull +#define XCT_FUN_RR_8BRES 0x1000000000000000ull +#define XCT_FUN_RR_24BRES 0x2000000000000000ull +#define XCT_FUN_RR_40BRES 0x3000000000000000ull +#define XCT_FUN_I 0x0800000000000000ull +#define XCT_FUN_O 0x0400000000000000ull +#define XCT_FUN_E 0x0200000000000000ull +#define XCT_FUN_FUN_M 0x01c0000000000000ull +#define XCT_FUN_FUN_S 54 +#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) +#define XCT_FUN_CRM_M 0x0038000000000000ull +#define XCT_FUN_CRM_NOP 0x0000000000000000ull +#define XCT_FUN_CRM_SIG 0x0008000000000000ull +#define XCT_FUN_LLEN_M 0x0007ffff00000000ull +#define XCT_FUN_LLEN_S 32 +#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) +#define XCT_FUN_SHL_M 0x00000000f8000000ull +#define XCT_FUN_SHL_S 27 +#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) +#define XCT_FUN_CHL_M 0x0000000007c00000ull +#define XCT_FUN_HSZ_M 0x00000000003c0000ull +#define XCT_FUN_ALG_M 0x0000000000038000ull +#define XCT_FUN_HP 0x0000000000004000ull +#define XCT_FUN_BCM_M 0x0000000000003800ull +#define XCT_FUN_BCP_M 0x0000000000000600ull +#define XCT_FUN_SIG_M 0x00000000000001f0ull +#define XCT_FUN_SIG_TCP4 0x0000000000000140ull +#define XCT_FUN_SIG_TCP6 0x0000000000000150ull +#define XCT_FUN_SIG_UDP4 0x0000000000000160ull +#define XCT_FUN_SIG_UDP6 0x0000000000000170ull +#define XCT_FUN_A 0x0000000000000008ull +#define XCT_FUN_C 0x0000000000000004ull +#define XCT_FUN_AL2 0x0000000000000002ull +#define XCT_FUN_SE 0x0000000000000001ull + +/* Function descriptor 8byte result fields */ +#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull +#define XCT_FUNRES_8B_CS_S 32 +#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull +#define XCT_FUNRES_8B_CRC_S 0 + /* Control descriptor fields */ #define CTRL_CMD_T 0x8000000000000000ull #define CTRL_CMD_META_EVT 0x2000000000000000ull #define CTRL_CMD_O 0x0400000000000000ull -#define CTRL_CMD_REG_M 0x000000000000000full +#define CTRL_CMD_ETYPE_M 0x0038000000000000ull +#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull +#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull +#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull +#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull +#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull +#define CTRL_CMD_REG_M 0x000000000000007full #define CTRL_CMD_REG_S 0 #define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ CTRL_CMD_REG_M) @@ -461,6 +522,16 @@ extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, dma_addr_t *handle); +/* Routines to allocate flags (events) for channel syncronization */ +extern int pasemi_dma_alloc_flag(void); +extern void pasemi_dma_free_flag(int flag); +extern void pasemi_dma_set_flag(int flag); +extern void pasemi_dma_clear_flag(int flag); + +/* Routines to allocate function engines */ +extern int pasemi_dma_alloc_fun(void); +extern void pasemi_dma_free_fun(int fun); + /* Initialize the library, must be called before any other functions */ extern int pasemi_dma_init(void); diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index e5802c6..b95d033 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -117,7 +117,7 @@ struct pci_controller { #ifndef CONFIG_PPC64 -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } @@ -235,7 +235,7 @@ extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); extern int pcibios_remove_root_bus(struct pci_controller *phb); -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { struct device_node *busdn = bus->sysdata; diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 2c79f55..daea769 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -98,9 +98,6 @@ extern int icache_44x_need_flush; #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) - #define pte_ERROR(e) \ printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ (unsigned long long)pte_val(e)) @@ -420,7 +417,8 @@ extern int icache_44x_need_flush; #define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) #define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ + defined(CONFIG_KPROBES) /* We want the debuggers to be able to set breakpoints anywhere, so * don't write protect the kernel text */ #define _PAGE_RAM_TEXT _PAGE_RAM @@ -692,7 +690,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, #define pmd_page_vaddr(pmd) \ ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) #define pmd_page(pmd) \ - (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT)) + pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) #endif /* to find an entry in a kernel page-table-directory */ diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h new file mode 100644 index 0000000..fa74c6c --- /dev/null +++ b/include/asm-powerpc/phyp_dump.h @@ -0,0 +1,47 @@ +/* + * Hypervisor-assisted dump + * + * Linas Vepstas, Manish Ahuja 2008 + * Copyright 2008 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PPC64_PHYP_DUMP_H +#define _PPC64_PHYP_DUMP_H + +#ifdef CONFIG_PHYP_DUMP + +/* The RMR region will be saved for later dumping + * whenever the kernel crashes. Set this to 256MB. */ +#define PHYP_DUMP_RMR_START 0x0 +#define PHYP_DUMP_RMR_END (1UL<<28) + +struct phyp_dump { + /* Memory that is reserved during very early boot. */ + unsigned long init_reserve_start; + unsigned long init_reserve_size; + /* cmd line options during boot */ + unsigned long reserve_bootvar; + unsigned long phyp_dump_at_boot; + /* Check status during boot if dump supported, active & present*/ + unsigned long phyp_dump_configured; + unsigned long phyp_dump_is_active; + /* store cpu & hpte size */ + unsigned long cpu_state_size; + unsigned long hpte_region_size; + /* previous scratch area values */ + unsigned long reserved_scratch_addr; + unsigned long reserved_scratch_size; +}; + +extern struct phyp_dump *phyp_dump_info; + +int early_init_dt_scan_phyp_dump(unsigned long node, + const char *uname, int depth, void *data); + +#endif /* CONFIG_PHYP_DUMP */ +#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h index 2259d4c..e1dc090 100644 --- a/include/asm-powerpc/pmi.h +++ b/include/asm-powerpc/pmi.h @@ -29,8 +29,6 @@ #ifdef __KERNEL__ -#include <asm/of_device.h> - #define PMI_TYPE_FREQ_CHANGE 0x01 #define PMI_READ_TYPE 0 #define PMI_READ_DATA0 1 diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h new file mode 100644 index 0000000..033039a --- /dev/null +++ b/include/asm-powerpc/ppc4xx.h @@ -0,0 +1,18 @@ +/* + * PPC4xx Prototypes and definitions + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_POWERPC_PPC4xx_H__ +#define __ASM_POWERPC_PPC4xx_H__ + +extern void ppc4xx_reset_system(char *cmd); + +#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 2b69367..9e8ed68 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -434,8 +434,11 @@ struct ps3_sys_manager_ops { }; void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); -void ps3_sys_manager_power_off(void); -void ps3_sys_manager_restart(void); +void __noreturn ps3_sys_manager_power_off(void); +void __noreturn ps3_sys_manager_restart(void); +void __noreturn ps3_sys_manager_halt(void); +int ps3_sys_manager_get_wol(void); +void ps3_sys_manager_set_wol(int state); struct ps3_prealloc { const char *name; diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h index 891d689..39023dd 100644 --- a/include/asm-powerpc/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -58,6 +58,11 @@ struct pt_regs { #define __ARCH_WANT_COMPAT_SYS_PTRACE #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ + STACK_FRAME_OVERHEAD + 288) +#define STACK_FRAME_MARKER 12 /* Size of dummy stack frame allocated when calling signal handler. */ #define __SIGNAL_FRAMESIZE 128 @@ -66,6 +71,10 @@ struct pt_regs { #else /* __powerpc64__ */ #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) +#define STACK_FRAME_MARKER 2 /* Size of stack frame allocated when calling signal handler. */ #define __SIGNAL_FRAMESIZE 64 diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index 430dc77..c3be6e2 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -85,6 +85,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val); /* QE internal API */ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); enum qe_clock qe_clock_source(const char *source); +unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); @@ -92,7 +93,16 @@ unsigned long qe_muram_alloc(int size, int align); int qe_muram_free(unsigned long offset); unsigned long qe_muram_alloc_fixed(unsigned long offset, int size); void qe_muram_dump(void); -void *qe_muram_addr(unsigned long offset); + +static inline void __iomem *qe_muram_addr(unsigned long offset) +{ + return (void __iomem *)&qe_immr->muram[offset]; +} + +static inline unsigned long qe_muram_offset(void __iomem *addr) +{ + return addr - (void __iomem *)qe_immr->muram; +} /* Structure that defines QE firmware binary files. * diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h index cefc147..a6cc93b 100644 --- a/include/asm-powerpc/rwsem.h +++ b/include/asm-powerpc/rwsem.h @@ -32,11 +32,20 @@ struct rw_semaphore { #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) spinlock_t wait_lock; struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif }; +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) } + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ + LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) @@ -46,12 +55,15 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); -static inline void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ + do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ + } while (0) /* * lock for reading @@ -78,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem) /* * lock for writing */ -static inline void __down_write(struct rw_semaphore *sem) +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) { int tmp; @@ -88,6 +100,11 @@ static inline void __down_write(struct rw_semaphore *sem) rwsem_down_write_failed(sem); } +static inline void __down_write(struct rw_semaphore *sem) +{ + __down_write_nested(sem, 0); +} + static inline int __down_write_trylock(struct rw_semaphore *sem) { int tmp; diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h index e8b493d..9aea8e9 100644 --- a/include/asm-powerpc/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -15,6 +15,7 @@ #ifdef CONFIG_MEMORY_HOTPLUG extern void create_section_mapping(unsigned long start, unsigned long end); +extern int remove_section_mapping(unsigned long start, unsigned long end); #ifdef CONFIG_NUMA extern int hot_add_scn_to_nid(unsigned long scn_addr); #else diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h index cc4cfce..258c939 100644 --- a/include/asm-powerpc/spinlock.h +++ b/include/asm-powerpc/spinlock.h @@ -19,6 +19,7 @@ * * (the type definitions are in asm/spinlock_types.h) */ +#include <linux/irqflags.h> #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/hvcall.h> diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h index aa40f92..e40010a 100644 --- a/include/asm-powerpc/string.h +++ b/include/asm-powerpc/string.h @@ -7,6 +7,7 @@ #define __HAVE_ARCH_STRNCPY #define __HAVE_ARCH_STRLEN #define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRNCMP #define __HAVE_ARCH_STRCAT #define __HAVE_ARCH_MEMSET #define __HAVE_ARCH_MEMCPY @@ -18,6 +19,7 @@ extern char * strcpy(char *,const char *); extern char * strncpy(char *,const char *, __kernel_size_t); extern __kernel_size_t strlen(const char *); extern int strcmp(const char *,const char *); +extern int strncmp(const char *, const char *, __kernel_size_t); extern char * strcat(char *, const char *); extern void * memset(void *,int,__kernel_size_t); extern void * memcpy(void *,const void *,__kernel_size_t); diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 29552ff..fab1674 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -5,6 +5,7 @@ #define _ASM_POWERPC_SYSTEM_H #include <linux/kernel.h> +#include <linux/irqflags.h> #include <asm/hw_irq.h> diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index ca23b68..100c6fb 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -96,11 +96,10 @@ static inline void sysfs_remove_device_from_node(struct sys_device *dev, { } +#endif /* CONFIG_NUMA */ #include <asm-generic/topology.h> -#endif /* CONFIG_NUMA */ - #ifdef CONFIG_SMP #include <asm/cputable.h> #define smt_capable() (cpu_has_feature(CPU_FTR_SMT)) diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h index 903fd19..c243a6a 100644 --- a/include/asm-powerpc/types.h +++ b/include/asm-powerpc/types.h @@ -84,6 +84,13 @@ typedef unsigned long long u64; typedef __vector128 vector128; +/* Physical address used by some IO functions */ +#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT) +typedef u64 phys_addr_t; +#else +typedef u32 phys_addr_t; +#endif + #ifdef __powerpc64__ typedef u64 dma_addr_t; #else diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h index 1379a4f..3909a2e 100644 --- a/include/asm-ppc/ocp.h +++ b/include/asm-ppc/ocp.h @@ -31,7 +31,6 @@ #include <asm/mmu.h> #include <asm/ocp_ids.h> -#include <asm/semaphore.h> #ifdef CONFIG_PPC_OCP diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index cfda7d5..121b2ec 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -25,7 +25,7 @@ static void __init check_bugs(void) case CPU_SH7619: *p++ = '2'; break; - case CPU_SH7203 ... CPU_SH7263: + case CPU_SH7203 ... CPU_MXG: *p++ = '2'; *p++ = 'a'; break; diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index ec028c6..da46e67 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -10,14 +10,14 @@ #ifndef __ASM_CPU_SH4_FREQ_H #define __ASM_CPU_SH4_FREQ_H -#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366) +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7366) #define FRQCR 0xa4150000 #define VCLKCR 0xa4150004 #define SCLKACR 0xa4150008 #define SCLKBCR 0xa415000c -#if defined(CONFIG_CPU_SUBTYPE_SH7722) #define IrDACLKCR 0xa4150010 -#endif #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h index f3d0f53..25b1e6a 100644 --- a/include/asm-sh/cpu-sh4/rtc.h +++ b/include/asm-sh/cpu-sh4/rtc.h @@ -1,7 +1,12 @@ #ifndef __ASM_SH_CPU_SH4_RTC_H #define __ASM_SH_CPU_SH4_RTC_H +#ifdef CONFIG_CPU_SUBTYPE_SH7723 +#define rtc_reg_size sizeof(u16) +#else #define rtc_reg_size sizeof(u32) +#endif + #define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ #define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR diff --git a/include/asm-sh/i2c-sh7760.h b/include/asm-sh/i2c-sh7760.h new file mode 100644 index 0000000..2418211 --- /dev/null +++ b/include/asm-sh/i2c-sh7760.h @@ -0,0 +1,22 @@ +/* + * MMIO/IRQ and platform data for SH7760 I2C channels + */ + +#ifndef _I2C_SH7760_H_ +#define _I2C_SH7760_H_ + +#define SH7760_I2C_DEVNAME "sh7760-i2c" + +#define SH7760_I2C0_MMIO 0xFE140000 +#define SH7760_I2C0_MMIOEND 0xFE14003B +#define SH7760_I2C0_IRQ 62 + +#define SH7760_I2C1_MMIO 0xFE150000 +#define SH7760_I2C1_MMIOEND 0xFE15003B +#define SH7760_I2C1_IRQ 63 + +struct sh7760_i2c_platdata { + unsigned int speed_khz; +}; + +#endif diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h new file mode 100644 index 0000000..2329363 --- /dev/null +++ b/include/asm-sh/migor.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_MIGOR_H +#define __ASM_SH_MIGOR_H + +/* + * linux/include/asm-sh/migor.h + * + * Copyright (C) 2008 Renesas Solutions + * + * Portions Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* GPIO */ +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +#define PORT_PACR 0xa4050100 +#define PORT_PDCR 0xa4050106 +#define PORT_PECR 0xa4050108 +#define PORT_PHCR 0xa405010e +#define PORT_PJCR 0xa4050110 +#define PORT_PKCR 0xa4050112 +#define PORT_PLCR 0xa4050114 +#define PORT_PMCR 0xa4050116 +#define PORT_PRCR 0xa405011c +#define PORT_PWCR 0xa4050146 +#define PORT_PXCR 0xa4050148 +#define PORT_PYCR 0xa405014a +#define PORT_PZCR 0xa405014c +#define PORT_PADR 0xa4050120 +#define PORT_PWDR 0xa4050166 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRC 0xa405015c + +#define PORT_MSELCRB 0xa4050182 + +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +#define PORT_PSELA 0xa405014e +#define PORT_PSELB 0xa4050150 +#define PORT_PSELC 0xa4050152 +#define PORT_PSELD 0xa4050154 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRB 0xa405015a +#define PORT_HIZCRC 0xa405015c + +#define BSC_CS6ABCR 0xfec1001c + +#endif /* __ASM_SH_MIGOR_H */ diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h index 5d3712c..d9162c5 100644 --- a/include/asm-sh/mpc1211/pci.h +++ b/include/asm-sh/mpc1211/pci.h @@ -24,8 +24,6 @@ #define PCI_PROBE_BIOS 1 #define PCI_PROBE_CONF1 2 #define PCI_PROBE_CONF2 4 -#define PCI_NO_SORT 0x100 -#define PCI_BIOS_SORT 0x200 #define PCI_NO_CHECKS 0x400 #define PCI_ASSIGN_ROMS 0x1000 #define PCI_BIOS_IRQ_SCAN 0x2000 diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index ec707b9..b7c7ce8 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -16,7 +16,7 @@ enum cpu_type { CPU_SH7619, /* SH-2A types */ - CPU_SH7203, CPU_SH7206, CPU_SH7263, + CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, /* SH-3 types */ CPU_SH7705, CPU_SH7706, CPU_SH7707, @@ -29,7 +29,8 @@ enum cpu_type { CPU_SH7760, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7723, CPU_SHX3, /* SH4AL-DSP types */ CPU_SH7343, CPU_SH7722, CPU_SH7366, diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index 1770460..a33838f 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -55,11 +55,11 @@ #define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ #define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ #define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ -#define PA_ICCR (PA_BCR+0x0600) /* Serial control */ -#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */ -#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */ -#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */ -#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */ +#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ #define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ #define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ #define PA_PMR (PA_BCR+0x0900) /* */ @@ -107,11 +107,11 @@ #define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ #define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ #define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ -#define PA_ICCR (PA_BCR+0x0500) /* Serial control */ -#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */ -#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */ -#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */ -#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */ +#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ #define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ #define PA_AX88796L 0xa5800400 /* AX88796L Area */ @@ -190,6 +190,8 @@ #define IRQ_TP (HL_FPGA_IRQ_BASE + 12) #define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) #define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) +#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) +#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) unsigned char *highlander_init_irq_r7780mp(void); unsigned char *highlander_init_irq_r7780rp(void); diff --git a/include/asm-sh/se7721.h b/include/asm-sh/se7721.h new file mode 100644 index 0000000..b957f60 --- /dev/null +++ b/include/asm-sh/se7721.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_SE7721_H +#define __ASM_SH_SE7721_H +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB8000000 + +#define PA_PCIC PA_PERIPHERAL +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED 0xB6800000 /* 8bit LED */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ + +#define MRSHPC_IRQ0 10 + +#define FPGA_ILSR1 (PA_FPGA + 0x02) +#define FPGA_ILSR2 (PA_FPGA + 0x03) +#define FPGA_ILSR3 (PA_FPGA + 0x04) +#define FPGA_ILSR4 (PA_FPGA + 0x05) +#define FPGA_ILSR5 (PA_FPGA + 0x06) +#define FPGA_ILSR6 (PA_FPGA + 0x07) +#define FPGA_ILSR7 (PA_FPGA + 0x08) +#define FPGA_ILSR8 (PA_FPGA + 0x09) + +void init_se7721_IRQ(void); + +#define __IO_PREFIX se7721 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7721_H */ diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h index e0e89fc..3690fe5 100644 --- a/include/asm-sh/se7722.h +++ b/include/asm-sh/se7722.h @@ -77,6 +77,8 @@ #define PORT_PSELA 0xA405014EUL #define PORT_PYCR 0xA405014AUL #define PORT_PZCR 0xA405014CUL +#define PORT_HIZCRA 0xA4050158UL +#define PORT_HIZCRC 0xA405015CUL /* IRQ */ #define IRQ0_IRQ 32 diff --git a/include/asm-sh/sh_keysc.h b/include/asm-sh/sh_keysc.h new file mode 100644 index 0000000..b5a4dd5 --- /dev/null +++ b/include/asm-sh/sh_keysc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_KEYSC_H__ +#define __ASM_KEYSC_H__ + +#define SH_KEYSC_MAXKEYS 30 + +struct sh_keysc_info { + enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; + int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ + int delay; + int keycodes[SH_KEYSC_MAXKEYS]; +}; + +#endif /* __ASM_KEYSC_H__ */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 5145aa2..e65b6b8 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -146,6 +146,8 @@ extern unsigned int instruction_size(unsigned int insn); extern unsigned long cached_to_uncached; +extern struct dentry *sh_debugfs_root; + /* XXX * disable hlt during certain critical i/o operations */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h index f402a3b..34cdb28 100644 --- a/include/asm-sh/topology.h +++ b/include/asm-sh/topology.h @@ -16,7 +16,7 @@ .cache_nice_tries = 2, \ .busy_idx = 3, \ .idle_idx = 2, \ - .newidle_idx = 0, \ + .newidle_idx = 2, \ .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index c0318b6..1e41fda 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -55,13 +55,10 @@ static inline void set_fs(mm_segment_t s) * If we don't have an MMU (or if its disabled) the only thing we really have * to look out for is if the address resides somewhere outside of what * available RAM we have. - * - * TODO: This check could probably also stand to be restricted somewhat more.. - * though it still does the Right Thing(tm) for the time being. */ static inline int __access_ok(unsigned long addr, unsigned long size) { - return ((addr >= memory_start) && ((addr + size) < memory_end)); + return 1; } #else /* CONFIG_MMU */ #define __addr_ok(addr) \ diff --git a/include/asm-sparc/Kbuild b/include/asm-sparc/Kbuild index c6a55cf..6712237 100644 --- a/include/asm-sparc/Kbuild +++ b/include/asm-sparc/Kbuild @@ -5,7 +5,6 @@ header-y += asi.h header-y += bpp.h header-y += jsflash.h header-y += openpromio.h -header-y += pconf.h header-y += reg.h header-y += traps.h header-y += vfc_ioctls.h diff --git a/include/asm-sparc/a.out-core.h b/include/asm-sparc/a.out-core.h deleted file mode 100644 index e8fd338..0000000 --- a/include/asm-sparc/a.out-core.h +++ /dev/null @@ -1,52 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include <linux/user.h> - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - unsigned long first_stack_page; - - dump->magic = SUNOS_CORE_MAGIC; - dump->len = sizeof(struct user); - dump->regs.psr = regs->psr; - dump->regs.pc = regs->pc; - dump->regs.npc = regs->npc; - dump->regs.y = regs->y; - /* fuck me plenty */ - memcpy(&dump->regs.regs[0], ®s->u_regs[1], (sizeof(unsigned long) * 15)); - dump->uexec = current->thread.core_exec; - dump->u_tsize = (((unsigned long) current->mm->end_code) - - ((unsigned long) current->mm->start_code)) & ~(PAGE_SIZE - 1); - dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))); - dump->u_dsize -= dump->u_tsize; - dump->u_dsize &= ~(PAGE_SIZE - 1); - first_stack_page = (regs->u_regs[UREG_FP] & ~(PAGE_SIZE - 1)); - dump->u_ssize = (TASK_SIZE - first_stack_page) & ~(PAGE_SIZE - 1); - memcpy(&dump->fpu.fpstatus.fregs.regs[0], ¤t->thread.float_regs[0], (sizeof(unsigned long) * 32)); - dump->fpu.fpstatus.fsr = current->thread.fsr; - dump->fpu.fpstatus.flags = dump->fpu.fpstatus.extra = 0; - dump->fpu.fpstatus.fpq_count = current->thread.fpqdepth; - memcpy(&dump->fpu.fpstatus.fpq[0], ¤t->thread.fpqueue[0], - ((sizeof(unsigned long) * 2) * 16)); - dump->sigcode = 0; -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-sparc/a.out.h b/include/asm-sparc/a.out.h deleted file mode 100644 index 2f1c374..0000000 --- a/include/asm-sparc/a.out.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef __SPARC_A_OUT_H__ -#define __SPARC_A_OUT_H__ - -#define SPARC_PGSIZE 0x2000 /* Thanks to the sun4 architecture... */ -#define SEGMENT_SIZE SPARC_PGSIZE /* whee... */ - -#ifndef __ASSEMBLY__ - -struct exec { - unsigned char a_dynamic:1; /* A __DYNAMIC is in this image */ - unsigned char a_toolversion:7; - unsigned char a_machtype; - unsigned short a_info; - unsigned int a_text; /* length of text, in bytes */ - unsigned int a_data; /* length of data, in bytes */ - unsigned int a_bss; /* length of bss, in bytes */ - unsigned int a_syms; /* length of symbol table, in bytes */ - unsigned int a_entry; /* where program begins */ - unsigned int a_trsize; - unsigned int a_drsize; -}; - -#endif /* !__ASSEMBLY__ */ - -/* Where in the file does the text information begin? */ -#define N_TXTOFF(x) (N_MAGIC(x) == ZMAGIC ? 0 : sizeof (struct exec)) - -/* Where do the Symbols start? */ -#define N_SYMOFF(x) (N_TXTOFF(x) + (x).a_text + \ - (x).a_data + (x).a_trsize + \ - (x).a_drsize) - -/* Where does text segment go in memory after being loaded? */ -#define N_TXTADDR(x) (unsigned long)(((N_MAGIC(x) == ZMAGIC) && \ - ((x).a_entry < SPARC_PGSIZE)) ? \ - 0 : SPARC_PGSIZE) - -/* And same for the data segment.. */ -#define N_DATADDR(x) (N_MAGIC(x)==OMAGIC ? \ - (N_TXTADDR(x) + (x).a_text) \ - : (unsigned long) (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#ifndef __ASSEMBLY__ - -/* - * Sparc relocation types - */ -enum reloc_type -{ - RELOC_8, - RELOC_16, - RELOC_32, /* simplest relocs */ - RELOC_DISP8, - RELOC_DISP16, - RELOC_DISP32, /* Disp's (pc-rel) */ - RELOC_WDISP30, - RELOC_WDISP22, /* SR word disp's */ - RELOC_HI22, - RELOC_22, /* SR 22-bit relocs */ - RELOC_13, - RELOC_LO10, /* SR 13&10-bit relocs */ - RELOC_SFA_BASE, - RELOC_SFA_OFF13, /* SR S.F.A. relocs */ - RELOC_BASE10, - RELOC_BASE13, - RELOC_BASE22, /* base_relative pic */ - RELOC_PC10, - RELOC_PC22, /* special pc-rel pic */ - RELOC_JMP_TBL, /* jmp_tbl_rel in pic */ - RELOC_SEGOFF16, /* ShLib offset-in-seg */ - RELOC_GLOB_DAT, - RELOC_JMP_SLOT, - RELOC_RELATIVE /* rtld relocs */ -}; - -/* - * Format of a relocation datum. - */ -struct relocation_info /* used when header.a_machtype == M_SPARC */ -{ - unsigned int r_address; /* relocation addr */ - unsigned int r_index:24; /* segment index or symbol index */ - unsigned int r_extern:1; /* if F, r_index==SEG#; if T, SYM idx */ - unsigned int r_pad:2; /* <unused> */ - enum reloc_type r_type:5; /* type of relocation to perform */ - int r_addend; /* addend for relocation value */ -}; - -#define N_RELOCATION_INFO_DECLARED 1 - -#endif /* !(__ASSEMBLY__) */ - -#endif /* __SPARC_A_OUT_H__ */ diff --git a/include/asm-sparc/device.h b/include/asm-sparc/device.h index 680e51d..19790eb 100644 --- a/include/asm-sparc/device.h +++ b/include/asm-sparc/device.h @@ -16,6 +16,8 @@ struct dev_archdata { struct device_node *prom_node; struct of_device *op; + + int numa_node; }; #endif /* _ASM_SPARC_DEVICE_H */ diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h index dbe7a58..d3978e0 100644 --- a/include/asm-sparc/floppy.h +++ b/include/asm-sparc/floppy.h @@ -280,7 +280,7 @@ static inline void sun_fd_enable_dma(void) /* Our low-level entry point in arch/sparc/kernel/entry.S */ extern int sparc_floppy_request_irq(int irq, unsigned long flags, - irqreturn_t (*irq_handler)(int irq, void *)); + irq_handler_t irq_handler); static int sun_fd_request_irq(void) { diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h index 1a03c28..fcdba51 100644 --- a/include/asm-sparc/head.h +++ b/include/asm-sparc/head.h @@ -46,45 +46,12 @@ b linux_sparc_syscall; \ rd %psr, %l0; -/* Software trap for SunOS4.1.x system calls. */ -#define SUNOS_SYSCALL_TRAP \ - rd %psr, %l0; \ - sethi %hi(sunos_sys_table), %l7; \ - b linux_sparc_syscall; \ - or %l7, %lo(sunos_sys_table), %l7; - -#define SUNOS_NO_SYSCALL_TRAP \ - b sunos_syscall; \ - rd %psr, %l0; \ - nop; \ - nop; - -/* Software trap for Slowaris system calls. */ -#define SOLARIS_SYSCALL_TRAP \ - b solaris_syscall; \ - rd %psr, %l0; \ - nop; \ - nop; - -#define INDIRECT_SOLARIS_SYSCALL(x) \ - mov x, %g1; \ - b solaris_syscall; \ - rd %psr, %l0; \ - nop; - #define BREAKPOINT_TRAP \ b breakpoint_trap; \ rd %psr,%l0; \ nop; \ nop; -/* Software trap for Sparc-netbsd system calls. */ -#define NETBSD_SYSCALL_TRAP \ - sethi %hi(sys_call_table), %l7; \ - or %l7, %lo(sys_call_table), %l7; \ - b bsd_syscall; \ - rd %psr, %l0; - /* The Get Condition Codes software trap for userland. */ #define GETCC_TRAP \ b getcc_trap_handler; mov %psr, %l0; nop; nop; diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h index 058c206..3f4d008 100644 --- a/include/asm-sparc/ioctls.h +++ b/include/asm-sparc/ioctls.h @@ -43,8 +43,6 @@ #define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */ #define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */ #define TIOCCONS _IO('t', 36) -#define __TIOCSSIZE _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */ -#define __TIOCGSIZE _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */ #define TIOCGSOFTCAR _IOR('t', 100, int) #define TIOCSSOFTCAR _IOW('t', 101, int) #define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */ diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h index b7dc40b..e18be98 100644 --- a/include/asm-sparc/mman.h +++ b/include/asm-sparc/mman.h @@ -22,19 +22,6 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ -/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system - * XXX calls. - */ - -/* SunOS sys_mctl() stuff... */ -#define MC_SYNC 1 /* Sync pages in memory with storage (usu. a file) */ -#define MC_LOCK 2 /* Lock pages into core ram, do not allow swapping of them */ -#define MC_UNLOCK 3 /* Unlock pages locked via previous mctl() with MC_LOCK arg */ -#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */ -#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */ - -#define MADV_FREE 0x5 /* (Solaris) contents can be freed */ - #ifdef __KERNEL__ #ifndef __ASSEMBLY__ #define arch_mmap_check sparc_mmap_check diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h index f2461e8..618344d 100644 --- a/include/asm-sparc/namei.h +++ b/include/asm-sparc/namei.h @@ -8,19 +8,6 @@ #ifndef __SPARC_NAMEI_H #define __SPARC_NAMEI_H -#define SPARC_BSD_EMUL "/usr/gnemul/sunos/" -#define SPARC_SOL_EMUL "/usr/gnemul/solaris/" - -static inline char * __emul_prefix(void) -{ - switch (current->personality) { - case PER_SUNOS: - return SPARC_BSD_EMUL; - case PER_SVR4: - return SPARC_SOL_EMUL; - default: - return NULL; - } -} +#define __emul_prefix() NULL #endif /* __SPARC_NAMEI_H */ diff --git a/include/asm-sparc/pconf.h b/include/asm-sparc/pconf.h deleted file mode 100644 index d73c1f1..0000000 --- a/include/asm-sparc/pconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* $Id: pconf.h,v 1.3 1996/04/25 06:13:25 davem Exp $ - * pconf.h: pathconf() and fpathconf() defines for SunOS - * system call compatibility. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_PCONF_H -#define _SPARC_PCONF_H - -#include <linux/fs.h> -#include <linux/limits.h> - -#define _PCONF_LINK 1 /* Max number of links to an object */ -#define _PCONF_CANON 2 /* TTY input buffer line size */ -#define _PCONF_INPUT 3 /* Biggest packet a tty can imbibe at once */ -#define _PCONF_NAME 4 /* Filename length max */ -#define _PCONF_PATH 5 /* Max size of a pathname */ -#define _PCONF_PIPE 6 /* Buffer size for a pipe */ -#define _PCONF_CHRESTRICT 7 /* Can only root chown files? */ -#define _PCONF_NOTRUNC 8 /* Are pathnames truncated if too big? */ -#define _PCONF_VDISABLE 9 /* Magic char to disable special tty chars */ -#define _PCONF_MAXPCONF 9 - -#endif /* !(_SPARC_PCONF_H) */ diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h index 40b1e41..e300697 100644 --- a/include/asm-sparc/processor.h +++ b/include/asm-sparc/processor.h @@ -13,8 +13,6 @@ */ #define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; }) -#include <linux/a.out.h> - #include <asm/psr.h> #include <asm/ptrace.h> #include <asm/head.h> @@ -67,7 +65,6 @@ struct thread_struct { struct fpq fpqueue[16]; unsigned long flags; mm_segment_t current_ds; - struct exec core_exec; /* just what it says. */ int new_signal; }; diff --git a/include/asm-sparc/prom.h b/include/asm-sparc/prom.h index df5dc44..fd55522 100644 --- a/include/asm-sparc/prom.h +++ b/include/asm-sparc/prom.h @@ -77,6 +77,11 @@ extern int of_getintprop_default(struct device_node *np, const char *name, int def); extern int of_find_in_proplist(const char *list, const char *match, int len); +#ifdef CONFIG_NUMA +extern int of_node_to_nid(struct device_node *dp); +#else +#define of_node_to_nid(dp) (-1) +#endif extern void prom_build_devicetree(void); diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h index 2e2bd0b..a00e15d 100644 --- a/include/asm-sparc/socket.h +++ b/include/asm-sparc/socket.h @@ -24,9 +24,6 @@ #define SO_SNDTIMEO 0x4000 #define SO_ACCEPTCONN 0x8000 -/* wha!??? */ -#define SO_DONTLINGER (~SO_LINGER) /* Older SunOS compat. hack */ - #define SO_SNDBUF 0x1001 #define SO_RCVBUF 0x1002 #define SO_SNDBUFFORCE 0x100a diff --git a/include/asm-sparc/solerrno.h b/include/asm-sparc/solerrno.h deleted file mode 100644 index 8abce7e..0000000 --- a/include/asm-sparc/solerrno.h +++ /dev/null @@ -1,132 +0,0 @@ -/* $Id: solerrno.h,v 1.5 1996/04/25 06:13:32 davem Exp $ - * solerrno.h: Solaris error return codes for compatibility. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SOLERRNO_H -#define _SPARC_SOLERRNO_H - -#define SOL_EPERM 1 /* Required superuser access perms */ -#define SOL_ENOENT 2 /* File or directory does not exist */ -#define SOL_ESRCH 3 /* Process did not exist */ -#define SOL_EINTR 4 /* System call was interrupted */ -#define SOL_EIO 5 /* An i/o error occurred */ -#define SOL_ENXIO 6 /* Device or Address does not exist */ -#define SOL_E2BIG 7 /* Too many arguments were given */ -#define SOL_ENOEXEC 8 /* Header of executable was munged */ -#define SOL_EBADF 9 /* Bogus file number */ -#define SOL_ECHILD 10 /* No children of process exist */ -#define SOL_EAGAIN 11 /* beep beep, "try again later" */ -#define SOL_ENOMEM 12 /* No memory available */ -#define SOL_EACCES 13 /* Access not allowed */ -#define SOL_EFAULT 14 /* Address passed was invalid */ -#define SOL_ENOTBLK 15 /* blkdev op on non-block device */ -#define SOL_EBUSY 16 /* Mounted device was busy */ -#define SOL_EEXIST 17 /* File specified already exists */ -#define SOL_EXDEV 18 /* Link request across diff devices */ -#define SOL_ENODEV 19 /* Device does not exist on system */ -#define SOL_ENOTDIR 20 /* Dir operation on non-directory */ -#define SOL_EISDIR 21 /* File was of directory type */ -#define SOL_EINVAL 22 /* Argument passed was invalid */ -#define SOL_ENFILE 23 /* No more room in file table */ -#define SOL_EMFILE 24 /* Proc has too many files open */ -#define SOL_ENOTTY 25 /* Ioctl was invalid for req device */ -#define SOL_ETXTBSY 26 /* Text file in busy state */ -#define SOL_EFBIG 27 /* Too big of a file for operation */ -#define SOL_ENOSPC 28 /* Disk is full */ -#define SOL_ESPIPE 29 /* Seek attempted on non-seeking dev*/ -#define SOL_EROFS 30 /* Write attempted on read-only fs */ -#define SOL_EMLINK 31 /* Too many links in file search */ -#define SOL_EPIPE 32 /* Call a plumber */ -#define SOL_EDOM 33 /* Argument was out of fct domain */ -#define SOL_ERANGE 34 /* Could not represent math result */ -#define SOL_ENOMSG 35 /* Message of req type doesn't exist */ -#define SOL_EIDRM 36 /* Identifier has been removed */ -#define SOL_ECHRNG 37 /* Req channel number out of range */ -#define SOL_EL2NSYNC 38 /* Could not sync at run level 2 */ -#define SOL_EL3HLT 39 /* Halted at run level 3 */ -#define SOL_EL3RST 40 /* Reset at run level 3 */ -#define SOL_ELNRNG 41 /* Out of range link number */ -#define SOL_EUNATCH 42 /* Driver for protocol not attached */ -#define SOL_ENOCSI 43 /* CSI structure not around */ -#define SOL_EL2HLT 44 /* Halted at run level 2 */ -#define SOL_EDEADLK 45 /* Deadlock condition detected */ -#define SOL_ENOLCK 46 /* Record locks unavailable */ -#define SOL_ECANCELED 47 /* Cancellation of oper. happened */ -#define SOL_ENOTSUP 48 /* Attempt of unsupported operation */ -#define SOL_EDQUOT 49 /* Users disk quota exceeded */ -#define SOL_EBADE 50 /* Invalid exchange */ -#define SOL_EBADR 51 /* Request descriptor was invalid */ -#define SOL_EXFULL 52 /* Full exchange */ -#define SOL_ENOANO 53 /* ano does not exist */ -#define SOL_EBADRQC 54 /* Req code was invalid */ -#define SOL_EBADSLT 55 /* Bad slot number */ -#define SOL_EDEADLOCK 56 /* Deadlock in fs error */ -#define SOL_EBFONT 57 /* Font file format invalid */ -/* YOW, I LOVE SYSV STREAMS!!!! */ -#define SOL_ENOSTR 60 /* Stream-op on non-stream dev */ -#define SOL_ENODATA 61 /* No data avail at this time */ -#define SOL_ETIME 62 /* Expiration of time occurred */ -#define SOL_ENOSR 63 /* Streams resources exhausted */ -#define SOL_ENONET 64 /* No network connected */ -#define SOL_ENOPKG 65 /* Non-installed package */ -#define SOL_EREMOTE 66 /* Object was on remote machine */ -#define SOL_ENOLINK 67 /* Cut link */ -#define SOL_EADV 68 /* Error in advertise */ -#define SOL_ESRMNT 69 /* Some magic srmount problem */ -#define SOL_ECOMM 70 /* During send, comm error occurred */ -#define SOL_EPROTO 71 /* Protocol botch */ -#define SOL_EMULTIHOP 74 /* Multihop attempted */ -#define SOL_EBADMSG 77 /* Message was unreadable */ -#define SOL_ENAMETOOLONG 78 /* Too long of a path name */ -#define SOL_EOVERFLOW 79 /* Data type too small for datum */ -#define SOL_ENOTUNIQ 80 /* Logical name was not unique */ -#define SOL_EBADFD 81 /* Op cannot be performed on fd */ -#define SOL_EREMCHG 82 /* Remote address is now different */ -#define SOL_ELIBACC 83 /* Shared lib could not be accessed */ -#define SOL_ELIBBAD 84 /* ShLib is corrupted in some way */ -#define SOL_ELIBSCN 85 /* A.out ShLib problems */ -#define SOL_ELIBMAX 86 /* Exceeded ShLib linkage limit */ -#define SOL_ELIBEXEC 87 /* Execution of ShLib attempted */ -#define SOL_EILSEQ 88 /* Bad byte sequence found */ -#define SOL_ENOSYS 89 /* Invalid filesystem operation */ -#define SOL_ELOOP 90 /* Detected loop in symbolic links */ -#define SOL_ERESTART 91 /* System call is restartable */ -#define SOL_ESTRPIPE 92 /* Do not sleep in head of stream */ -#define SOL_ENOTEMPTY 93 /* Rmdir of non-empty directory */ -#define SOL_EUSERS 94 /* Over abundance of users for ufs */ -#define SOL_ENOTSOCK 95 /* Sock-op on non-sock */ -#define SOL_EDESTADDRREQ 96 /* No dest addr given, but needed */ -#define SOL_EMSGSIZE 97 /* Msg too big */ -#define SOL_EPROTOTYPE 98 /* Bad socket protocol */ -#define SOL_ENOPROTOOPT 99 /* Unavailable protocol */ -#define SOL_EPROTONOSUPPORT 120 /* Unsupported protocol */ -#define SOL_ESOCKTNOSUPPORT 121 /* Unsupported socket type */ -#define SOL_EOPNOTSUPP 122 /* Unsupported sock-op */ -#define SOL_EPFNOSUPPORT 123 /* Unsupported protocol family */ -#define SOL_EAFNOSUPPORT 124 /* Unsup addr family for protocol */ -#define SOL_EADDRINUSE 125 /* Req addr is already in use */ -#define SOL_EADDRNOTAVAIL 126 /* Req addr not available right now */ -#define SOL_ENETDOWN 127 /* Your subnet is on fire */ -#define SOL_ENETUNREACH 128 /* Someone playing with gateway and */ - /* did not tell you he was going to */ -#define SOL_ENETRESET 129 /* Buy less-buggy ethernet cards */ -#define SOL_ECONNABORTED 130 /* Aborted connection due to sw */ -#define SOL_ECONNRESET 131 /* Your peers reset your connection */ -#define SOL_ENOBUFS 132 /* No buffer space available */ -#define SOL_EISCONN 133 /* Connect on already connected */ - /* socket attempted */ -#define SOL_ENOTCONN 134 /* Comm on non-connected socket */ -#define SOL_ESHUTDOWN 143 /* Op attempted after sock-shutdown */ -#define SOL_ETOOMANYREFS 144 /* Reference limit exceeded */ -#define SOL_ETIMEDOUT 145 /* Timed out connection */ -#define SOL_ECONNREFUSED 146 /* Connection refused by remote host*/ -#define SOL_EHOSTDOWN 147 /* Remote host is up in flames */ -#define SOL_EHOSTUNREACH 148 /* Make a left at Easton Ave..... */ -#define SOL_EWOULDBLOCK EAGAIN /* Just an alias */ -#define SOL_EALREADY 149 /* Operation is already occurring */ -#define SOL_EINPROGRESS 150 /* Operation is happening now */ -#define SOL_ESTALE 151 /* Fungus growth on NFS file handle */ - -#endif /* !(_SPARC_SOLERRNO_H) */ diff --git a/include/asm-sparc/svr4.h b/include/asm-sparc/svr4.h deleted file mode 100644 index da1f1c9..0000000 --- a/include/asm-sparc/svr4.h +++ /dev/null @@ -1,119 +0,0 @@ -/* Solaris/SPARC constants and definitions -- - * (C) 1996 Miguel de Icaza - * - * This file is not meant to be included by user level applications - * but the solaris syscall emulator - */ - -#ifndef _SPARC_SVR4_H -#define _SPARC_SVR4_H - -/* Signals as used by svr4 */ -typedef struct { /* signal set type */ - ulong sigbits[4]; -} svr4_sigset_t; - -/* Values for siginfo.code */ -#define SVR4_SINOINFO 32767 -/* Siginfo, sucker expects bunch of information on those parameters */ -typedef union { - char total_size [128]; - struct { - int signo; - int code; - int error; - union { - } data; - } siginfo; -} svr4_siginfo_t; - -/* Context definition */ - -/* Location of the user stored registers into a greg_t */ -enum { - SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y, - SVR4_G1, SVR4_G2, SVR4_G3, SVR4_G4, - SVR4_G5, SVR4_G6, SVR4_G7, SVR4_O0, - SVR4_O1, SVR4_O2, SVR4_O3, SVR4_O4, - SVR4_O5, SVR4_O6, SVR4_O7 -}; - -/* sizeof (regs) / sizeof (greg_t), defined in the ABI */ -#define SVR4_NREGS 19 -#define SVR4_MAXWIN 31 - -typedef struct { - uint rwin_lo[8]; - uint rwin_in[8]; -} svr4_rwindow_t; - -typedef struct { - int count; - int __user *winptr [SVR4_MAXWIN]; /* pointer to the windows */ - svr4_rwindow_t win[SVR4_MAXWIN]; /* the windows */ -} svr4_gwindows_t; - -typedef int svr4_gregset_t[SVR4_NREGS]; - -typedef struct { - double fpu_regs[32]; - void *fp_q; - unsigned fp_fsr; - u_char fp_nqel; - u_char fp_nqsize; - u_char inuse; /* if fpu is in use */ -} svr4_fregset_t; - -typedef struct { - uint id; /* if this holds "xrs" string => ptr is valid */ - caddr_t ptr; -} svr4_xrs_t; - -/* Machine dependent context */ -typedef struct { - svr4_gregset_t greg; /* registers 0..19 (see top) */ - svr4_gwindows_t __user *gwin; /* may point to register windows */ - svr4_fregset_t freg; /* floating point registers */ - svr4_xrs_t xrs; /* mhm? */ - long pad[19]; -} svr4_mcontext_t; - -/* flags for stack_t.flags */ -enum svr4_stack_flags { - SVR4_SS_ONSTACK, - SVR4_SS_DISABLE, -}; - -/* signal stack exection place, unsupported */ -typedef struct svr4_stack_t { - char __user *sp; - int size; - int flags; -} svr4_stack_t; - -/* Context used by getcontext and setcontext */ -typedef struct svr4_ucontext_t { - u_long flags; /* context flags, indicate what is loaded */ - struct svr4_ucontext *link; - svr4_sigset_t sigmask; - svr4_stack_t stack; - svr4_mcontext_t mcontext; - long pad[23]; -} svr4_ucontext_t; - -/* windows hold the windows as they were at signal time, - * ucontext->mcontext holds a pointer to them. - * addresses for uc and si are passed as parameters to svr4 signal - * handler - */ - -/* This is the signal frame that is passed to the signal handler */ -typedef struct { - svr4_gwindows_t gw; /* windows */ - svr4_ucontext_t uc; /* machine context */ - svr4_siginfo_t si; /* siginfo */ -} svr4_signal_frame_t; - -#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7))) - -#endif /* include control */ diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h index 4333232..733d405 100644 --- a/include/asm-sparc/termios.h +++ b/include/asm-sparc/termios.h @@ -33,11 +33,6 @@ struct ltchars { }; #endif /* __KERNEL__ */ -struct sunos_ttysize { - int st_lines; /* Lines on the terminal */ - int st_columns; /* Columns on the terminal */ -}; - struct winsize { unsigned short ws_row; unsigned short ws_col; diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h index b5f1abf..3400ea8 100644 --- a/include/asm-sparc/user.h +++ b/include/asm-sparc/user.h @@ -1,60 +1,6 @@ -/* $Id: user.h,v 1.5 1998/02/23 01:49:22 rth Exp $ - * asm-sparc/user.h: Core file definitions for the Sparc. - * - * Keep in sync with reg.h. Actually, we could get rid of this - * one, since we won't a.out core dump that much anyways - miguel. - * Copyright (C) 1995 (davem@caip.rutgers.edu) - */ #ifndef _SPARC_USER_H #define _SPARC_USER_H -#include <asm/a.out.h> -struct sunos_regs { - unsigned long psr, pc, npc, y; - unsigned long regs[15]; -}; - -struct sunos_fpqueue { - unsigned long *addr; - unsigned long inst; -}; - -struct sunos_fp { - union { - unsigned long regs[32]; - double reg_dbls[16]; - } fregs; - unsigned long fsr; - unsigned long flags; - unsigned long extra; - unsigned long fpq_count; - struct sunos_fpqueue fpq[16]; -}; - -struct sunos_fpu { - struct sunos_fp fpstatus; -}; - -/* The SunOS core file header layout. */ -struct user { - unsigned long magic; - unsigned long len; - struct sunos_regs regs; - struct exec uexec; - int signal; - size_t u_tsize; /* all of these in bytes! */ - size_t u_dsize; - size_t u_ssize; - char u_comm[17]; - struct sunos_fpu fpu; - unsigned long sigcode; /* Special sigcontext subcode, if any */ -}; - -#define NBPG 0x2000 -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.uexec.a_data) -#define HOST_STACK_END_ADDR (- u.u_ssize * NBPG) -#define SUNOS_CORE_MAGIC 0x080456 +/* Nothing to define. */ #endif /* !(_SPARC_USER_H) */ diff --git a/include/asm-sparc64/Kbuild b/include/asm-sparc64/Kbuild index a90dc82..dce1cf9 100644 --- a/include/asm-sparc64/Kbuild +++ b/include/asm-sparc64/Kbuild @@ -12,7 +12,6 @@ header-y += display7seg.h header-y += envctrl.h header-y += openprom.h header-y += openpromio.h -header-y += pconf.h header-y += psrcompat.h header-y += pstate.h header-y += reg.h diff --git a/include/asm-sparc64/a.out-core.h b/include/asm-sparc64/a.out-core.h deleted file mode 100644 index 3499b3c..0000000 --- a/include/asm-sparc64/a.out-core.h +++ /dev/null @@ -1,31 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include <linux/user.h> - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - /* Only should be used for SunOS and ancient a.out - * SparcLinux binaries... Not worth implementing. - */ - memset(dump, 0, sizeof(struct user)); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/include/asm-sparc64/a.out.h b/include/asm-sparc64/a.out.h deleted file mode 100644 index 44208c2..0000000 --- a/include/asm-sparc64/a.out.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-sparc/a.out.h> diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h index 083c9a0..c1be406 100644 --- a/include/asm-sparc64/ioctls.h +++ b/include/asm-sparc64/ioctls.h @@ -44,8 +44,6 @@ #define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */ #define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */ #define TIOCCONS _IO('t', 36) -#define __TIOCSSIZE _IOW('t', 37, struct sunos_ttysize) /* SunOS Specific */ -#define __TIOCGSIZE _IOR('t', 38, struct sunos_ttysize) /* SunOS Specific */ #define TIOCGSOFTCAR _IOR('t', 100, int) #define TIOCSSOFTCAR _IOW('t', 101, int) #define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */ diff --git a/include/asm-sparc64/iommu.h b/include/asm-sparc64/iommu.h index 46325dd..d7b9afc 100644 --- a/include/asm-sparc64/iommu.h +++ b/include/asm-sparc64/iommu.h @@ -56,6 +56,7 @@ struct strbuf { }; extern int iommu_table_init(struct iommu *iommu, int tsbsize, - u32 dma_offset, u32 dma_addr_mask); + u32 dma_offset, u32 dma_addr_mask, + int numa_node); #endif /* !(_SPARC64_IOMMU_H) */ diff --git a/include/asm-sparc64/lmb.h b/include/asm-sparc64/lmb.h new file mode 100644 index 0000000..6a352cb --- /dev/null +++ b/include/asm-sparc64/lmb.h @@ -0,0 +1,10 @@ +#ifndef _SPARC64_LMB_H +#define _SPARC64_LMB_H + +#include <asm/oplib.h> + +#define LMB_DBG(fmt...) prom_printf(fmt) + +#define LMB_REAL_LIMIT 0 + +#endif /* !(_SPARC64_LMB_H) */ diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h index 8cc1860..e584563 100644 --- a/include/asm-sparc64/mman.h +++ b/include/asm-sparc64/mman.h @@ -22,19 +22,6 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ -/* XXX Need to add flags to SunOS's mctl, mlockall, and madvise system - * XXX calls. - */ - -/* SunOS sys_mctl() stuff... */ -#define MC_SYNC 1 /* Sync pages in memory with storage (usu. a file) */ -#define MC_LOCK 2 /* Lock pages into core ram, do not allow swapping of them */ -#define MC_UNLOCK 3 /* Unlock pages locked via previous mctl() with MC_LOCK arg */ -#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */ -#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */ - -#define MADV_FREE 0x5 /* (Solaris) contents can be freed */ - #ifdef __KERNEL__ #ifndef __ASSEMBLY__ #define arch_mmap_check sparc64_mmap_check diff --git a/include/asm-sparc64/mmzone.h b/include/asm-sparc64/mmzone.h new file mode 100644 index 0000000..ebf5986 --- /dev/null +++ b/include/asm-sparc64/mmzone.h @@ -0,0 +1,17 @@ +#ifndef _SPARC64_MMZONE_H +#define _SPARC64_MMZONE_H + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; + +#define NODE_DATA(nid) (node_data[nid]) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) + +extern int numa_cpu_lookup_table[]; +extern cpumask_t numa_cpumask_lookup_table[]; + +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#endif /* _SPARC64_MMZONE_H */ diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h index ccda19e..275161f 100644 --- a/include/asm-sparc64/namei.h +++ b/include/asm-sparc64/namei.h @@ -8,19 +8,6 @@ #ifndef __SPARC64_NAMEI_H #define __SPARC64_NAMEI_H -#define SPARC_BSD_EMUL "/usr/gnemul/sunos/" -#define SPARC_SOL_EMUL "/usr/gnemul/solaris/" - -static inline char * __emul_prefix(void) -{ - switch (current->personality) { - case PER_SUNOS: - return SPARC_BSD_EMUL; - case PER_SVR4: - return SPARC_SOL_EMUL; - default: - return NULL; - } -} +#define __emul_prefix() NULL #endif /* __SPARC64_NAMEI_H */ diff --git a/include/asm-sparc64/numnodes.h b/include/asm-sparc64/numnodes.h deleted file mode 100644 index 017e7e7..0000000 --- a/include/asm-sparc64/numnodes.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC64_NUMNODES_H -#define _SPARC64_NUMNODES_H - -#define NODES_SHIFT 0 - -#endif /* !(_SPARC64_NUMNODES_H) */ diff --git a/include/asm-sparc64/pconf.h b/include/asm-sparc64/pconf.h deleted file mode 100644 index aad106a..0000000 --- a/include/asm-sparc64/pconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* $Id: pconf.h,v 1.1 1996/12/02 00:09:10 davem Exp $ - * pconf.h: pathconf() and fpathconf() defines for SunOS - * system call compatibility. - * - * Copyright (C) 1995, 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC64_PCONF_H -#define _SPARC64_PCONF_H - -#include <linux/fs.h> -#include <linux/limits.h> - -#define _PCONF_LINK 1 /* Max number of links to an object */ -#define _PCONF_CANON 2 /* TTY input buffer line size */ -#define _PCONF_INPUT 3 /* Biggest packet a tty can imbibe at once */ -#define _PCONF_NAME 4 /* Filename length max */ -#define _PCONF_PATH 5 /* Max size of a pathname */ -#define _PCONF_PIPE 6 /* Buffer size for a pipe */ -#define _PCONF_CHRESTRICT 7 /* Can only root chown files? */ -#define _PCONF_NOTRUNC 8 /* Are pathnames truncated if too big? */ -#define _PCONF_VDISABLE 9 /* Magic char to disable special tty chars */ -#define _PCONF_MAXPCONF 9 - -#endif /* !(_SPARC64_PCONF_H) */ diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h index 6da1978..b4b951d 100644 --- a/include/asm-sparc64/ptrace.h +++ b/include/asm-sparc64/ptrace.h @@ -8,6 +8,8 @@ * stack during a system call and basically all traps. */ +#define PT_REGS_MAGIC 0x57ac6c00 + #ifndef __ASSEMBLY__ struct pt_regs { @@ -16,7 +18,19 @@ struct pt_regs { unsigned long tpc; unsigned long tnpc; unsigned int y; - unsigned int fprs; + + /* We encode a magic number, PT_REGS_MAGIC, along + * with the %tt (trap type) register value at trap + * entry time. The magic number allows us to identify + * accurately a trap stack frame in the stack + * unwinder, and the %tt value allows us to test + * things like "in a system call" etc. for an arbitray + * process. + * + * The PT_REGS_MAGIC is choosen such that it can be + * loaded completely using just a sethi instruction. + */ + unsigned int magic; }; struct pt_regs32 { @@ -147,7 +161,7 @@ extern void __show_regs(struct pt_regs *); #define PT_V9_TPC 0x88 #define PT_V9_TNPC 0x90 #define PT_V9_Y 0x98 -#define PT_V9_FPRS 0x9c +#define PT_V9_MAGIC 0x9c #define PT_TSTATE PT_V9_TSTATE #define PT_TPC PT_V9_TPC #define PT_TNPC PT_V9_TNPC diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h index 44a625a..8cf071f 100644 --- a/include/asm-sparc64/socket.h +++ b/include/asm-sparc64/socket.h @@ -24,9 +24,6 @@ #define SO_SNDTIMEO 0x4000 #define SO_ACCEPTCONN 0x8000 -/* wha!??? */ -#define SO_DONTLINGER (~SO_LINGER) /* Older SunOS compat. hack */ - #define SO_SNDBUF 0x1001 #define SO_RCVBUF 0x1002 #define SO_SNDBUFFORCE 0x100a diff --git a/include/asm-sparc64/solerrno.h b/include/asm-sparc64/solerrno.h deleted file mode 100644 index a2ea6fc..0000000 --- a/include/asm-sparc64/solerrno.h +++ /dev/null @@ -1,132 +0,0 @@ -/* $Id: solerrno.h,v 1.1 1996/12/26 14:22:40 davem Exp $ - * solerrno.h: Solaris error return codes for compatibility. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC64_SOLERRNO_H -#define _SPARC64_SOLERRNO_H - -#define SOL_EPERM 1 /* Required superuser access perms */ -#define SOL_ENOENT 2 /* File or directory does not exist */ -#define SOL_ESRCH 3 /* Process did not exist */ -#define SOL_EINTR 4 /* System call was interrupted */ -#define SOL_EIO 5 /* An i/o error occurred */ -#define SOL_ENXIO 6 /* Device or Address does not exist */ -#define SOL_E2BIG 7 /* Too many arguments were given */ -#define SOL_ENOEXEC 8 /* Header of executable was munged */ -#define SOL_EBADF 9 /* Bogus file number */ -#define SOL_ECHILD 10 /* No children of process exist */ -#define SOL_EAGAIN 11 /* beep beep, "try again later" */ -#define SOL_ENOMEM 12 /* No memory available */ -#define SOL_EACCES 13 /* Access not allowed */ -#define SOL_EFAULT 14 /* Address passed was invalid */ -#define SOL_ENOTBLK 15 /* blkdev op on non-block device */ -#define SOL_EBUSY 16 /* Mounted device was busy */ -#define SOL_EEXIST 17 /* File specified already exists */ -#define SOL_EXDEV 18 /* Link request across diff devices */ -#define SOL_ENODEV 19 /* Device does not exist on system */ -#define SOL_ENOTDIR 20 /* Dir operation on non-directory */ -#define SOL_EISDIR 21 /* File was of directory type */ -#define SOL_EINVAL 22 /* Argument passed was invalid */ -#define SOL_ENFILE 23 /* No more room in file table */ -#define SOL_EMFILE 24 /* Proc has too many files open */ -#define SOL_ENOTTY 25 /* Ioctl was invalid for req device */ -#define SOL_ETXTBSY 26 /* Text file in busy state */ -#define SOL_EFBIG 27 /* Too big of a file for operation */ -#define SOL_ENOSPC 28 /* Disk is full */ -#define SOL_ESPIPE 29 /* Seek attempted on non-seeking dev*/ -#define SOL_EROFS 30 /* Write attempted on read-only fs */ -#define SOL_EMLINK 31 /* Too many links in file search */ -#define SOL_EPIPE 32 /* Call a plumber */ -#define SOL_EDOM 33 /* Argument was out of fct domain */ -#define SOL_ERANGE 34 /* Could not represent math result */ -#define SOL_ENOMSG 35 /* Message of req type doesn't exist */ -#define SOL_EIDRM 36 /* Identifier has been removed */ -#define SOL_ECHRNG 37 /* Req channel number out of range */ -#define SOL_EL2NSYNC 38 /* Could not sync at run level 2 */ -#define SOL_EL3HLT 39 /* Halted at run level 3 */ -#define SOL_EL3RST 40 /* Reset at run level 3 */ -#define SOL_ELNRNG 41 /* Out of range link number */ -#define SOL_EUNATCH 42 /* Driver for protocol not attached */ -#define SOL_ENOCSI 43 /* CSI structure not around */ -#define SOL_EL2HLT 44 /* Halted at run level 2 */ -#define SOL_EDEADLK 45 /* Deadlock condition detected */ -#define SOL_ENOLCK 46 /* Record locks unavailable */ -#define SOL_ECANCELED 47 /* Cancellation of oper. happened */ -#define SOL_ENOTSUP 48 /* Attempt of unsupported operation */ -#define SOL_EDQUOT 49 /* Users disk quota exceeded */ -#define SOL_EBADE 50 /* Invalid exchange */ -#define SOL_EBADR 51 /* Request descriptor was invalid */ -#define SOL_EXFULL 52 /* Full exchange */ -#define SOL_ENOANO 53 /* ano does not exist */ -#define SOL_EBADRQC 54 /* Req code was invalid */ -#define SOL_EBADSLT 55 /* Bad slot number */ -#define SOL_EDEADLOCK 56 /* Deadlock in fs error */ -#define SOL_EBFONT 57 /* Font file format invalid */ -/* YOW, I LOVE SYSV STREAMS!!!! */ -#define SOL_ENOSTR 60 /* Stream-op on non-stream dev */ -#define SOL_ENODATA 61 /* No data avail at this time */ -#define SOL_ETIME 62 /* Expiration of time occurred */ -#define SOL_ENOSR 63 /* Streams resources exhausted */ -#define SOL_ENONET 64 /* No network connected */ -#define SOL_ENOPKG 65 /* Non-installed package */ -#define SOL_EREMOTE 66 /* Object was on remote machine */ -#define SOL_ENOLINK 67 /* Cut link */ -#define SOL_EADV 68 /* Error in advertise */ -#define SOL_ESRMNT 69 /* Some magic srmount problem */ -#define SOL_ECOMM 70 /* During send, comm error occurred */ -#define SOL_EPROTO 71 /* Protocol botch */ -#define SOL_EMULTIHOP 74 /* Multihop attempted */ -#define SOL_EBADMSG 77 /* Message was unreadable */ -#define SOL_ENAMETOOLONG 78 /* Too long of a path name */ -#define SOL_EOVERFLOW 79 /* Data type too small for datum */ -#define SOL_ENOTUNIQ 80 /* Logical name was not unique */ -#define SOL_EBADFD 81 /* Op cannot be performed on fd */ -#define SOL_EREMCHG 82 /* Remote address is now different */ -#define SOL_ELIBACC 83 /* Shared lib could not be accessed */ -#define SOL_ELIBBAD 84 /* ShLib is corrupted in some way */ -#define SOL_ELIBSCN 85 /* A.out ShLib problems */ -#define SOL_ELIBMAX 86 /* Exceeded ShLib linkage limit */ -#define SOL_ELIBEXEC 87 /* Execution of ShLib attempted */ -#define SOL_EILSEQ 88 /* Bad byte sequence found */ -#define SOL_ENOSYS 89 /* Invalid filesystem operation */ -#define SOL_ELOOP 90 /* Detected loop in symbolic links */ -#define SOL_ERESTART 91 /* System call is restartable */ -#define SOL_ESTRPIPE 92 /* Do not sleep in head of stream */ -#define SOL_ENOTEMPTY 93 /* Rmdir of non-empty directory */ -#define SOL_EUSERS 94 /* Over abundance of users for ufs */ -#define SOL_ENOTSOCK 95 /* Sock-op on non-sock */ -#define SOL_EDESTADDRREQ 96 /* No dest addr given, but needed */ -#define SOL_EMSGSIZE 97 /* Msg too big */ -#define SOL_EPROTOTYPE 98 /* Bad socket protocol */ -#define SOL_ENOPROTOOPT 99 /* Unavailable protocol */ -#define SOL_EPROTONOSUPPORT 120 /* Unsupported protocol */ -#define SOL_ESOCKTNOSUPPORT 121 /* Unsupported socket type */ -#define SOL_EOPNOTSUPP 122 /* Unsupported sock-op */ -#define SOL_EPFNOSUPPORT 123 /* Unsupported protocol family */ -#define SOL_EAFNOSUPPORT 124 /* Unsup addr family for protocol */ -#define SOL_EADDRINUSE 125 /* Req addr is already in use */ -#define SOL_EADDRNOTAVAIL 126 /* Req addr not available right now */ -#define SOL_ENETDOWN 127 /* Your subnet is on fire */ -#define SOL_ENETUNREACH 128 /* Someone playing with gateway and */ - /* did not tell you he was going to */ -#define SOL_ENETRESET 129 /* Buy less-buggy ethernet cards */ -#define SOL_ECONNABORTED 130 /* Aborted connection due to sw */ -#define SOL_ECONNRESET 131 /* Your peers reset your connection */ -#define SOL_ENOBUFS 132 /* No buffer space available */ -#define SOL_EISCONN 133 /* Connect on already connected */ - /* socket attempted */ -#define SOL_ENOTCONN 134 /* Comm on non-connected socket */ -#define SOL_ESHUTDOWN 143 /* Op attempted after sock-shutdown */ -#define SOL_ETOOMANYREFS 144 /* Reference limit exceeded */ -#define SOL_ETIMEDOUT 145 /* Timed out connection */ -#define SOL_ECONNREFUSED 146 /* Connection refused by remote host*/ -#define SOL_EHOSTDOWN 147 /* Remote host is up in flames */ -#define SOL_EHOSTUNREACH 148 /* Make a left at Easton Ave..... */ -#define SOL_EWOULDBLOCK EAGAIN /* Just an alias */ -#define SOL_EALREADY 149 /* Operation is already occurring */ -#define SOL_EINPROGRESS 150 /* Operation is happening now */ -#define SOL_ESTALE 151 /* Fungus growth on NFS file handle */ - -#endif /* !(_SPARC64_SOLERRNO_H) */ diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h index 77bcd2b..b99d4e4 100644 --- a/include/asm-sparc64/sparsemem.h +++ b/include/asm-sparc64/sparsemem.h @@ -3,7 +3,7 @@ #ifdef __KERNEL__ -#define SECTION_SIZE_BITS 31 +#define SECTION_SIZE_BITS 30 #define MAX_PHYSADDR_BITS 42 #define MAX_PHYSMEM_BITS 42 diff --git a/include/asm-sparc64/svr4.h b/include/asm-sparc64/svr4.h deleted file mode 100644 index c96d5f1..0000000 --- a/include/asm-sparc64/svr4.h +++ /dev/null @@ -1,120 +0,0 @@ -/* Solaris/SPARC constants and definitions -- - * (C) 1996 Miguel de Icaza - * - * This file is not meant to be included by user level applications - * but the solaris syscall emulator - */ - -#ifndef _SPARC64_SVR4_H -#define _SPARC64_SVR4_H - -/* Signals as used by svr4 */ -typedef struct { /* signal set type */ - uint sigbits[4]; -} svr4_sigset_t; - -/* Values for siginfo.code */ -#define SVR4_SINOINFO 32767 -/* Siginfo, sucker expects bunch of information on those parameters */ -typedef union { - char total_size [128]; - struct { - int signo; - int code; - int error; - union { - } data; - } siginfo; -} svr4_siginfo_t; - -/* Context definition */ - -/* Location of the user stored registers into a greg_t */ -enum { - SVR4_PSR, SVR4_PC, SVR4_NPC, SVR4_Y, - SVR4_G1, SVR4_G2, SVR4_G3, SVR4_G4, - SVR4_G5, SVR4_G6, SVR4_G7, SVR4_O0, - SVR4_O1, SVR4_O2, SVR4_O3, SVR4_O4, - SVR4_O5, SVR4_O6, SVR4_O7 -}; - -/* sizeof (regs) / sizeof (greg_t), defined in the ABI */ -#define SVR4_NREGS 19 -#define SVR4_MAXWIN 31 - -typedef struct { - u32 rwin_lo[8]; - u32 rwin_in[8]; -} svr4_rwindow_t; - -typedef struct { - int count; - u32 winptr [SVR4_MAXWIN]; /* pointer to the windows */ - - svr4_rwindow_t win[SVR4_MAXWIN]; /* the windows */ -} svr4_gwindows_t; - -typedef int svr4_gregset_t[SVR4_NREGS]; - -typedef struct { - u64 fpu_regs[32]; - u32 fp_q; - u32 fp_fsr; - u_char fp_nqel; - u_char fp_nqsize; - u_char inuse; /* if fpu is in use */ -} svr4_fregset_t; - -typedef struct { - u32 id; /* if this holds "xrs" string => ptr is valid */ - u32 ptr; -} svr4_xrs_t; - -/* Machine dependent context */ -typedef struct { - svr4_gregset_t greg; /* registers 0..19 (see top) */ - u32 gwin; /* may point to register windows */ - svr4_fregset_t freg; /* floating point registers */ - svr4_xrs_t xrs; /* mhm? */ - int pad[19]; -} svr4_mcontext_t; - -/* flags for stack_t.flags */ -enum svr4_stack_flags { - SVR4_SS_ONSTACK, - SVR4_SS_DISABLE, -}; - -/* signal stack execution place, unsupported */ -typedef struct svr4_stack_t { - u32 sp; - int size; - int flags; -} svr4_stack_t; - -/* Context used by getcontext and setcontext */ -typedef struct svr4_ucontext_t { - u32 flags; /* context flags, indicate what is loaded */ - u32 link; - svr4_sigset_t sigmask; - svr4_stack_t stack; - svr4_mcontext_t mcontext; - int pad[23]; -} svr4_ucontext_t; - -/* windows hold the windows as they were at signal time, - * ucontext->mcontext holds a pointer to them. - * addresses for uc and si are passed as parameters to svr4 signal - * handler - */ - -/* This is the signal frame that is passed to the signal handler */ -typedef struct { - svr4_gwindows_t gw; /* windows */ - svr4_ucontext_t uc; /* machine context */ - svr4_siginfo_t si; /* siginfo */ -} svr4_signal_frame_t; - -#define SVR4_SF_ALIGNED (((sizeof (svr4_signal_frame_t) + 7) & (~7))) - -#endif /* include control */ diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h index ef52721..cacbea1 100644 --- a/include/asm-sparc64/termios.h +++ b/include/asm-sparc64/termios.h @@ -33,11 +33,6 @@ struct ltchars { }; #endif /* __KERNEL__ */ -struct sunos_ttysize { - int st_lines; /* Lines on the terminal */ - int st_columns; /* Columns on the terminal */ -}; - struct winsize { unsigned short ws_row; unsigned short ws_col; diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h index c6b5570..001c040 100644 --- a/include/asm-sparc64/topology.h +++ b/include/asm-sparc64/topology.h @@ -1,6 +1,77 @@ #ifndef _ASM_SPARC64_TOPOLOGY_H #define _ASM_SPARC64_TOPOLOGY_H +#ifdef CONFIG_NUMA + +#include <asm/mmzone.h> + +static inline int cpu_to_node(int cpu) +{ + return numa_cpu_lookup_table[cpu]; +} + +#define parent_node(node) (node) + +static inline cpumask_t node_to_cpumask(int node) +{ + return numa_cpumask_lookup_table[node]; +} + +/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ +#define node_to_cpumask_ptr(v, node) \ + cpumask_t *v = &(numa_cpumask_lookup_table[node]) + +#define node_to_cpumask_ptr_next(v, node) \ + v = &(numa_cpumask_lookup_table[node]) + +static inline int node_to_first_cpu(int node) +{ + cpumask_t tmp; + tmp = node_to_cpumask(node); + return first_cpu(tmp); +} + +struct pci_bus; +#ifdef CONFIG_PCI +extern int pcibus_to_node(struct pci_bus *pbus); +#else +static inline int pcibus_to_node(struct pci_bus *pbus) +{ + return -1; +} +#endif + +#define pcibus_to_cpumask(bus) \ + (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus))) + +#define SD_NODE_INIT (struct sched_domain) { \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 0, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ +} + +#else /* CONFIG_NUMA */ + +#include <asm-generic/topology.h> + +#endif /* !(CONFIG_NUMA) */ + #ifdef CONFIG_SMP #define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id) #define topology_core_id(cpu) (cpu_data(cpu).core_id) @@ -10,8 +81,6 @@ #define smt_capable() (sparc64_multi_core) #endif /* CONFIG_SMP */ -#include <asm-generic/topology.h> - #define cpu_coregroup_map(cpu) (cpu_core_map[cpu]) #endif /* _ASM_SPARC64_TOPOLOGY_H */ diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index bbb9c8f..d3cc4ef 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -28,7 +28,7 @@ call routine; \ add %sp, PTREGS_OFF, %o0; \ ba,pt %xcc, rtrap; \ - clr %l6; \ + nop; \ nop; #define TRAP_7INSNS(routine) \ @@ -38,7 +38,7 @@ call routine; \ add %sp, PTREGS_OFF, %o0; \ ba,pt %xcc, rtrap; \ - clr %l6; + nop; #define TRAP_SAVEFPU(routine) \ sethi %hi(109f), %g7; \ @@ -47,7 +47,7 @@ call routine; \ add %sp, PTREGS_OFF, %o0; \ ba,pt %xcc, rtrap; \ - clr %l6; \ + nop; \ nop; #define TRAP_NOSAVE(routine) \ @@ -67,7 +67,7 @@ call routine; \ add %sp, PTREGS_OFF, %o0; \ ba,pt %xcc, rtrap; \ - clr %l6; \ + nop; \ nop; #define TRAP_ARG(routine, arg) \ @@ -78,7 +78,7 @@ call routine; \ mov arg, %o1; \ ba,pt %xcc, rtrap; \ - clr %l6; + nop; #define TRAPTL1_ARG(routine, arg) \ sethi %hi(109f), %g7; \ @@ -88,7 +88,7 @@ call routine; \ mov arg, %o1; \ ba,pt %xcc, rtrap; \ - clr %l6; + nop; #define SYSCALL_TRAP(routine, systbl) \ sethi %hi(109f), %g7; \ @@ -99,14 +99,6 @@ or %l7, %lo(systbl), %l7; \ nop; nop; -#define INDIRECT_SOLARIS_SYSCALL(num) \ - sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap; \ -109: or %g7, %lo(109b), %g7; \ - ba,pt %xcc, tl0_solaris + 0xc; \ - mov num, %g1; \ - nop;nop;nop; - #define TRAP_UTRAP(handler,lvl) \ mov handler, %g3; \ ba,pt %xcc, utrap_trap; \ @@ -117,11 +109,6 @@ nop; \ nop; -#ifdef CONFIG_SUNOS_EMUL -#define SUNOS_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sunos_sys_table) -#else -#define SUNOS_SYSCALL_TRAP TRAP(sunos_syscall) -#endif #ifdef CONFIG_COMPAT #define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32) #else @@ -130,11 +117,6 @@ #define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64) #define GETCC_TRAP TRAP(getcc) #define SETCC_TRAP TRAP(setcc) -#ifdef CONFIG_SOLARIS_EMUL -#define SOLARIS_SYSCALL_TRAP TRAP(solaris_sparc_syscall) -#else -#define SOLARIS_SYSCALL_TRAP TRAP(solaris_syscall) -#endif #define BREAKPOINT_TRAP TRAP(breakpoint_trap) #ifdef CONFIG_TRACE_IRQFLAGS @@ -184,7 +166,7 @@ ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \ add %l1, 4, %l2; \ stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \ - ba,pt %xcc, rtrap_clr_l6; \ + ba,pt %xcc, rtrap; \ stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]; #ifdef CONFIG_KPROBES diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h index 77559da..13be445 100644 --- a/include/asm-sparc64/unistd.h +++ b/include/asm-sparc64/unistd.h @@ -338,16 +338,6 @@ #define NR_SYSCALLS 317 #ifdef __KERNEL__ -/* sysconf options, for SunOS compatibility */ -#define _SC_ARG_MAX 1 -#define _SC_CHILD_MAX 2 -#define _SC_CLK_TCK 3 -#define _SC_NGROUPS_MAX 4 -#define _SC_OPEN_MAX 5 -#define _SC_JOB_CONTROL 6 -#define _SC_SAVED_IDS 7 -#define _SC_VERSION 8 - #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/include/asm-sparc64/user.h b/include/asm-sparc64/user.h index 02b1389..29fc6e9 100644 --- a/include/asm-sparc64/user.h +++ b/include/asm-sparc64/user.h @@ -1,60 +1 @@ -/* $Id: user.h,v 1.1 1996/12/26 14:22:44 davem Exp $ - * asm-sparc64/user.h: Core file definitions for the Sparc. - * - * Keep in sync with reg.h. Actually, we could get rid of this - * one, since we won't a.out core dump that much anyways - miguel. - * Copyright (C) 1995 (davem@caip.rutgers.edu) - */ -#ifndef _SPARC64_USER_H -#define _SPARC64_USER_H - -#include <linux/a.out.h> -struct sunos_regs { - unsigned int psr, pc, npc, y; - unsigned int regs[15]; -}; - -struct sunos_fpqueue { - unsigned int *addr; - unsigned int inst; -}; - -struct sunos_fp { - union { - unsigned int regs[32]; - double reg_dbls[16]; - } fregs; - unsigned int fsr; - unsigned int flags; - unsigned int extra; - unsigned int fpq_count; - struct sunos_fpqueue fpq[16]; -}; - -struct sunos_fpu { - struct sunos_fp fpstatus; -}; - -/* The SunOS core file header layout. */ -struct user { - unsigned int magic; - unsigned int len; - struct sunos_regs regs; - struct exec uexec; - int signal; - size_t u_tsize; /* all of these in bytes! */ - size_t u_dsize; - size_t u_ssize; - char u_comm[17]; - struct sunos_fpu fpu; - unsigned int sigcode; /* Special sigcontext subcode, if any */ -}; - -#define NBPG PAGE_SIZE /* XXX 4096 maybe? */ -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) -#define SUNOS_CORE_MAGIC 0x080456 - -#endif /* !(_SPARC64_USER_H) */ +#include <asm-sparc/user.h> diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h index ed8affb..2faed7e 100644 --- a/include/asm-x86/boot.h +++ b/include/asm-x86/boot.h @@ -17,4 +17,12 @@ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) +#ifdef CONFIG_X86_64 +#define BOOT_HEAP_SIZE 0x7000 +#define BOOT_STACK_SIZE 0x4000 +#else +#define BOOT_HEAP_SIZE 0x4000 +#define BOOT_STACK_SIZE 0x1000 +#endif + #endif /* _ASM_BOOT_H */ diff --git a/include/asm-x86/dma-mapping.h b/include/asm-x86/dma-mapping.h index 58f790f..a1a4dc7 100644 --- a/include/asm-x86/dma-mapping.h +++ b/include/asm-x86/dma-mapping.h @@ -1,5 +1,237 @@ +#ifndef _ASM_DMA_MAPPING_H_ +#define _ASM_DMA_MAPPING_H_ + +/* + * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for + * documentation. + */ + +#include <linux/scatterlist.h> +#include <asm/io.h> +#include <asm/swiotlb.h> + +extern dma_addr_t bad_dma_address; +extern int iommu_merge; +extern struct device fallback_dev; +extern int panic_on_overflow; +extern int forbid_dac; +extern int force_iommu; + +struct dma_mapping_ops { + int (*mapping_error)(dma_addr_t dma_addr); + void* (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *hwdev, phys_addr_t ptr, + size_t size, int direction); + /* like map_single, but doesn't check the device mask */ + dma_addr_t (*map_simple)(struct device *hwdev, phys_addr_t ptr, + size_t size, int direction); + void (*unmap_single)(struct device *dev, dma_addr_t addr, + size_t size, int direction); + void (*sync_single_for_cpu)(struct device *hwdev, + dma_addr_t dma_handle, size_t size, + int direction); + void (*sync_single_for_device)(struct device *hwdev, + dma_addr_t dma_handle, size_t size, + int direction); + void (*sync_single_range_for_cpu)(struct device *hwdev, + dma_addr_t dma_handle, unsigned long offset, + size_t size, int direction); + void (*sync_single_range_for_device)(struct device *hwdev, + dma_addr_t dma_handle, unsigned long offset, + size_t size, int direction); + void (*sync_sg_for_cpu)(struct device *hwdev, + struct scatterlist *sg, int nelems, + int direction); + void (*sync_sg_for_device)(struct device *hwdev, + struct scatterlist *sg, int nelems, + int direction); + int (*map_sg)(struct device *hwdev, struct scatterlist *sg, + int nents, int direction); + void (*unmap_sg)(struct device *hwdev, + struct scatterlist *sg, int nents, + int direction); + int (*dma_supported)(struct device *hwdev, u64 mask); + int is_phys; +}; + +extern const struct dma_mapping_ops *dma_ops; + +static inline int dma_mapping_error(dma_addr_t dma_addr) +{ + if (dma_ops->mapping_error) + return dma_ops->mapping_error(dma_addr); + + return (dma_addr == bad_dma_address); +} + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + + +extern int dma_supported(struct device *hwdev, u64 mask); +extern int dma_set_mask(struct device *dev, u64 mask); + +static inline dma_addr_t +dma_map_single(struct device *hwdev, void *ptr, size_t size, + int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + return dma_ops->map_single(hwdev, virt_to_phys(ptr), size, direction); +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t addr, size_t size, + int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->unmap_single) + dma_ops->unmap_single(dev, addr, size, direction); +} + +static inline int +dma_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + return dma_ops->map_sg(hwdev, sg, nents, direction); +} + +static inline void +dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, + int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->unmap_sg) + dma_ops->unmap_sg(hwdev, sg, nents, direction); +} + +static inline void +dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle, + size_t size, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_single_for_cpu) + dma_ops->sync_single_for_cpu(hwdev, dma_handle, size, + direction); + flush_write_buffers(); +} + +static inline void +dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle, + size_t size, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_single_for_device) + dma_ops->sync_single_for_device(hwdev, dma_handle, size, + direction); + flush_write_buffers(); +} + +static inline void +dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle, + unsigned long offset, size_t size, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_single_range_for_cpu) + dma_ops->sync_single_range_for_cpu(hwdev, dma_handle, offset, + size, direction); + + flush_write_buffers(); +} + +static inline void +dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_single_range_for_device) + dma_ops->sync_single_range_for_device(hwdev, dma_handle, + offset, size, direction); + + flush_write_buffers(); +} + +static inline void +dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, + int nelems, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_sg_for_cpu) + dma_ops->sync_sg_for_cpu(hwdev, sg, nelems, direction); + flush_write_buffers(); +} + +static inline void +dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, + int nelems, int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + if (dma_ops->sync_sg_for_device) + dma_ops->sync_sg_for_device(hwdev, sg, nelems, direction); + + flush_write_buffers(); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + size_t offset, size_t size, + int direction) +{ + BUG_ON(!valid_dma_direction(direction)); + return dma_ops->map_single(dev, page_to_phys(page)+offset, + size, direction); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, + size_t size, int direction) +{ + dma_unmap_single(dev, addr, size, direction); +} + +static inline void +dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir) +{ + flush_write_buffers(); +} + +static inline int dma_get_cache_alignment(void) +{ + /* no easy way to get cache size on all x86, so return the + * maximum possible, to be safe */ + return boot_cpu_data.x86_clflush_size; +} + +#define dma_is_consistent(d, h) (1) + #ifdef CONFIG_X86_32 -# include "dma-mapping_32.h" -#else -# include "dma-mapping_64.h" +# define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY +struct dma_coherent_mem { + void *virt_base; + u32 device_base; + int size; + int flags; + unsigned long *bitmap; +}; + +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); +#endif /* CONFIG_X86_32 */ #endif diff --git a/include/asm-x86/dma-mapping_32.h b/include/asm-x86/dma-mapping_32.h deleted file mode 100644 index 55f01bd..0000000 --- a/include/asm-x86/dma-mapping_32.h +++ /dev/null @@ -1,187 +0,0 @@ -#ifndef _ASM_I386_DMA_MAPPING_H -#define _ASM_I386_DMA_MAPPING_H - -#include <linux/mm.h> -#include <linux/scatterlist.h> - -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/bug.h> - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -static inline dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(size == 0); - flush_write_buffers(); - return virt_to_phys(ptr); -} - -static inline void -dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); -} - -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nents == 0 || sglist[0].length == 0); - - for_each_sg(sglist, sg, nents, i) { - BUG_ON(!sg_page(sg)); - - sg->dma_address = sg_phys(sg); - } - - flush_write_buffers(); - return nents; -} - -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, unsigned long offset, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); - return page_to_phys(page) + offset; -} - -static inline void -dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); -} - - -static inline void -dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(!valid_dma_direction(direction)); -} - -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static inline int -dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -extern int forbid_dac; - -static inline int -dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if(mask < 0x00ffffff) - return 0; - - /* Work around chipset bugs */ - if (forbid_dac > 0 && mask > 0xffffffffULL) - return 0; - - return 1; -} - -static inline int -dma_set_mask(struct device *dev, u64 mask) -{ - if(!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline int -dma_get_cache_alignment(void) -{ - /* no easy way to get cache size on all x86, so return the - * maximum possible, to be safe */ - return (1 << INTERNODE_CACHE_SHIFT); -} - -#define dma_is_consistent(d, h) (1) - -static inline void -dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY -extern int -dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); - -extern void -dma_release_declared_memory(struct device *dev); - -extern void * -dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); - -#endif diff --git a/include/asm-x86/dma-mapping_64.h b/include/asm-x86/dma-mapping_64.h deleted file mode 100644 index ecd0f61..0000000 --- a/include/asm-x86/dma-mapping_64.h +++ /dev/null @@ -1,202 +0,0 @@ -#ifndef _X8664_DMA_MAPPING_H -#define _X8664_DMA_MAPPING_H 1 - -/* - * IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for - * documentation. - */ - -#include <linux/scatterlist.h> -#include <asm/io.h> -#include <asm/swiotlb.h> - -struct dma_mapping_ops { - int (*mapping_error)(dma_addr_t dma_addr); - void* (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *hwdev, void *ptr, - size_t size, int direction); - /* like map_single, but doesn't check the device mask */ - dma_addr_t (*map_simple)(struct device *hwdev, char *ptr, - size_t size, int direction); - void (*unmap_single)(struct device *dev, dma_addr_t addr, - size_t size, int direction); - void (*sync_single_for_cpu)(struct device *hwdev, - dma_addr_t dma_handle, size_t size, - int direction); - void (*sync_single_for_device)(struct device *hwdev, - dma_addr_t dma_handle, size_t size, - int direction); - void (*sync_single_range_for_cpu)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, int direction); - void (*sync_single_range_for_device)(struct device *hwdev, - dma_addr_t dma_handle, unsigned long offset, - size_t size, int direction); - void (*sync_sg_for_cpu)(struct device *hwdev, - struct scatterlist *sg, int nelems, - int direction); - void (*sync_sg_for_device)(struct device *hwdev, - struct scatterlist *sg, int nelems, - int direction); - int (*map_sg)(struct device *hwdev, struct scatterlist *sg, - int nents, int direction); - void (*unmap_sg)(struct device *hwdev, - struct scatterlist *sg, int nents, - int direction); - int (*dma_supported)(struct device *hwdev, u64 mask); - int is_phys; -}; - -extern dma_addr_t bad_dma_address; -extern const struct dma_mapping_ops* dma_ops; -extern int iommu_merge; - -static inline int dma_mapping_error(dma_addr_t dma_addr) -{ - if (dma_ops->mapping_error) - return dma_ops->mapping_error(dma_addr); - - return (dma_addr == bad_dma_address); -} - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp); -extern void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle); - -static inline dma_addr_t -dma_map_single(struct device *hwdev, void *ptr, size_t size, - int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - return dma_ops->map_single(hwdev, ptr, size, direction); -} - -static inline void -dma_unmap_single(struct device *dev, dma_addr_t addr,size_t size, - int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - dma_ops->unmap_single(dev, addr, size, direction); -} - -#define dma_map_page(dev,page,offset,size,dir) \ - dma_map_single((dev), page_address(page)+(offset), (size), (dir)) - -#define dma_unmap_page dma_unmap_single - -static inline void -dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t dma_handle, - size_t size, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_single_for_cpu) - dma_ops->sync_single_for_cpu(hwdev, dma_handle, size, - direction); - flush_write_buffers(); -} - -static inline void -dma_sync_single_for_device(struct device *hwdev, dma_addr_t dma_handle, - size_t size, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_single_for_device) - dma_ops->sync_single_for_device(hwdev, dma_handle, size, - direction); - flush_write_buffers(); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dma_handle, - unsigned long offset, size_t size, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_single_range_for_cpu) { - dma_ops->sync_single_range_for_cpu(hwdev, dma_handle, offset, size, direction); - } - - flush_write_buffers(); -} - -static inline void -dma_sync_single_range_for_device(struct device *hwdev, dma_addr_t dma_handle, - unsigned long offset, size_t size, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_single_range_for_device) - dma_ops->sync_single_range_for_device(hwdev, dma_handle, - offset, size, direction); - - flush_write_buffers(); -} - -static inline void -dma_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, - int nelems, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_sg_for_cpu) - dma_ops->sync_sg_for_cpu(hwdev, sg, nelems, direction); - flush_write_buffers(); -} - -static inline void -dma_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, - int nelems, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - if (dma_ops->sync_sg_for_device) { - dma_ops->sync_sg_for_device(hwdev, sg, nelems, direction); - } - - flush_write_buffers(); -} - -static inline int -dma_map_sg(struct device *hwdev, struct scatterlist *sg, int nents, int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - return dma_ops->map_sg(hwdev, sg, nents, direction); -} - -static inline void -dma_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, - int direction) -{ - BUG_ON(!valid_dma_direction(direction)); - dma_ops->unmap_sg(hwdev, sg, nents, direction); -} - -extern int dma_supported(struct device *hwdev, u64 mask); - -/* same for gart, swiotlb, and nommu */ -static inline int dma_get_cache_alignment(void) -{ - return boot_cpu_data.x86_clflush_size; -} - -#define dma_is_consistent(d, h) 1 - -extern int dma_set_mask(struct device *dev, u64 mask); - -static inline void -dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - flush_write_buffers(); -} - -extern struct device fallback_dev; -extern int panic_on_overflow; - -#endif /* _X8664_DMA_MAPPING_H */ diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 43b1a8b..a9f7c6e 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -24,7 +24,7 @@ extern void update_e820(void); extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type); extern int e820_any_mapped(u64 start, u64 end, unsigned type); -extern void find_max_pfn(void); +extern void propagate_e820_map(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); extern void add_memory_region(unsigned long long start, unsigned long long size, int type); diff --git a/include/asm-x86/fixmap.h b/include/asm-x86/fixmap.h index 382eb27..5bd2069 100644 --- a/include/asm-x86/fixmap.h +++ b/include/asm-x86/fixmap.h @@ -1,5 +1,13 @@ +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + #ifdef CONFIG_X86_32 # include "fixmap_32.h" #else # include "fixmap_64.h" #endif + +#define clear_fixmap(idx) \ + __set_fixmap(idx, 0, __pgprot(0)) + +#endif diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h index eb16651..4b96148 100644 --- a/include/asm-x86/fixmap_32.h +++ b/include/asm-x86/fixmap_32.h @@ -10,8 +10,8 @@ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 */ -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H +#ifndef _ASM_FIXMAP_32_H +#define _ASM_FIXMAP_32_H /* used by vmalloc.c, vsyscall.lds.S. @@ -121,9 +121,6 @@ extern void reserve_top_address(unsigned long reserve); #define set_fixmap_nocache(idx, phys) \ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) -#define clear_fixmap(idx) \ - __set_fixmap(idx, 0, __pgprot(0)) - #define FIXADDR_TOP ((unsigned long)__FIXADDR_TOP) #define __FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT) diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h index f3d7685..355d26a 100644 --- a/include/asm-x86/fixmap_64.h +++ b/include/asm-x86/fixmap_64.h @@ -8,8 +8,8 @@ * Copyright (C) 1998 Ingo Molnar */ -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H +#ifndef _ASM_FIXMAP_64_H +#define _ASM_FIXMAP_64_H #include <linux/kernel.h> #include <asm/apicdef.h> diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h index f1b9693..b02ea6e 100644 --- a/include/asm-x86/genapic_32.h +++ b/include/asm-x86/genapic_32.h @@ -117,6 +117,7 @@ extern struct genapic *genapic; enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC}; #define get_uv_system_type() UV_NONE #define is_uv_system() 0 +#define uv_wakeup_secondary(a, b) 1 #endif diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 54522b8..da2adb4 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -21,8 +21,9 @@ extern void fpu_init(void); extern void mxcsr_feature_mask_init(void); -extern void init_fpu(struct task_struct *child); +extern int init_fpu(struct task_struct *child); extern asmlinkage void math_state_restore(void); +extern void init_thread_xstate(void); extern user_regset_active_fn fpregs_active, xfpregs_active; extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get; @@ -117,24 +118,22 @@ static inline void __save_init_fpu(struct task_struct *tsk) /* Using "fxsaveq %0" would be the ideal choice, but is only supported starting with gas 2.16. */ __asm__ __volatile__("fxsaveq %0" - : "=m" (tsk->thread.i387.fxsave)); + : "=m" (tsk->thread.xstate->fxsave)); #elif 0 /* Using, as a workaround, the properly prefixed form below isn't accepted by any binutils version so far released, complaining that the same type of prefix is used twice if an extended register is needed for addressing (fix submitted to mainline 2005-11-21). */ __asm__ __volatile__("rex64/fxsave %0" - : "=m" (tsk->thread.i387.fxsave)); + : "=m" (tsk->thread.xstate->fxsave)); #else /* This, however, we can work around by forcing the compiler to select an addressing mode that doesn't require extended registers. */ - __asm__ __volatile__("rex64/fxsave %P2(%1)" - : "=m" (tsk->thread.i387.fxsave) - : "cdaSDb" (tsk), - "i" (offsetof(__typeof__(*tsk), - thread.i387.fxsave))); + __asm__ __volatile__("rex64/fxsave (%1)" + : "=m" (tsk->thread.xstate->fxsave) + : "cdaSDb" (&tsk->thread.xstate->fxsave)); #endif - clear_fpu_state(&tsk->thread.i387.fxsave); + clear_fpu_state(&tsk->thread.xstate->fxsave); task_thread_info(tsk)->status &= ~TS_USEDFPU; } @@ -148,7 +147,7 @@ static inline int save_i387(struct _fpstate __user *buf) int err = 0; BUILD_BUG_ON(sizeof(struct user_i387_struct) != - sizeof(tsk->thread.i387.fxsave)); + sizeof(tsk->thread.xstate->fxsave)); if ((unsigned long)buf % 16) printk("save_i387: bad fpstate %p\n", buf); @@ -164,7 +163,7 @@ static inline int save_i387(struct _fpstate __user *buf) task_thread_info(tsk)->status &= ~TS_USEDFPU; stts(); } else { - if (__copy_to_user(buf, &tsk->thread.i387.fxsave, + if (__copy_to_user(buf, &tsk->thread.xstate->fxsave, sizeof(struct i387_fxsave_struct))) return -1; } @@ -201,7 +200,7 @@ static inline void restore_fpu(struct task_struct *tsk) "nop ; frstor %1", "fxrstor %1", X86_FEATURE_FXSR, - "m" ((tsk)->thread.i387.fxsave)); + "m" (tsk->thread.xstate->fxsave)); } /* We need a safe address that is cheap to find and that is already @@ -225,8 +224,8 @@ static inline void __save_init_fpu(struct task_struct *tsk) "fxsave %[fx]\n" "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:", X86_FEATURE_FXSR, - [fx] "m" (tsk->thread.i387.fxsave), - [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory"); + [fx] "m" (tsk->thread.xstate->fxsave), + [fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory"); /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. Clear the x87 state here by setting it to fixed values. safe_address is a random variable that should be in L1 */ @@ -327,25 +326,25 @@ static inline void clear_fpu(struct task_struct *tsk) static inline unsigned short get_fpu_cwd(struct task_struct *tsk) { if (cpu_has_fxsr) { - return tsk->thread.i387.fxsave.cwd; + return tsk->thread.xstate->fxsave.cwd; } else { - return (unsigned short)tsk->thread.i387.fsave.cwd; + return (unsigned short)tsk->thread.xstate->fsave.cwd; } } static inline unsigned short get_fpu_swd(struct task_struct *tsk) { if (cpu_has_fxsr) { - return tsk->thread.i387.fxsave.swd; + return tsk->thread.xstate->fxsave.swd; } else { - return (unsigned short)tsk->thread.i387.fsave.swd; + return (unsigned short)tsk->thread.xstate->fsave.swd; } } static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk) { if (cpu_has_xmm) { - return tsk->thread.i387.fxsave.mxcsr; + return tsk->thread.xstate->fxsave.mxcsr; } else { return MXCSR_DEFAULT; } diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h index 32c22ae..22e87c9 100644 --- a/include/asm-x86/numa_64.h +++ b/include/asm-x86/numa_64.h @@ -9,7 +9,8 @@ struct bootnode { u64 end; }; -extern int compute_hash_shift(struct bootnode *nodes, int numnodes); +extern int compute_hash_shift(struct bootnode *nodes, int numblks, + int *nodeids); #define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h index df867e5..f330234 100644 --- a/include/asm-x86/pci_64.h +++ b/include/asm-x86/pci_64.h @@ -22,6 +22,7 @@ extern int (*pci_config_read)(int seg, int bus, int dev, int fn, extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value); +extern void dma32_reserve_bootmem(void); extern void pci_iommu_alloc(void); /* The PCI address space does equal the physical memory diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 6e26c7c..e6bf92d 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -354,7 +354,7 @@ struct i387_soft_struct { u32 entry_eip; }; -union i387_union { +union thread_xstate { struct i387_fsave_struct fsave; struct i387_fxsave_struct fxsave; struct i387_soft_struct soft; @@ -365,6 +365,9 @@ DECLARE_PER_CPU(struct orig_ist, orig_ist); #endif extern void print_cpu_info(struct cpuinfo_x86 *); +extern unsigned int xstate_size; +extern void free_thread_xstate(struct task_struct *); +extern struct kmem_cache *task_xstate_cachep; extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c); extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); extern unsigned short num_cache_leaves; @@ -397,8 +400,8 @@ struct thread_struct { unsigned long cr2; unsigned long trap_no; unsigned long error_code; - /* Floating point info: */ - union i387_union i387 __attribute__((aligned(16)));; + /* floating point and extended processor state */ + union thread_xstate *xstate; #ifdef CONFIG_X86_32 /* Virtual 86 mode info */ struct vm86_struct __user *vm86_info; @@ -918,4 +921,11 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip, #define KSTK_EIP(task) (task_pt_regs(task)->ip) +/* Get/set a process' ability to use the timestamp counter instruction */ +#define GET_TSC_CTL(adr) get_tsc_mode((adr)) +#define SET_TSC_CTL(val) set_tsc_mode((val)) + +extern int get_tsc_mode(unsigned long adr); +extern int set_tsc_mode(unsigned int val); + #endif diff --git a/include/asm-x86/scatterlist.h b/include/asm-x86/scatterlist.h index d13c197..c043206 100644 --- a/include/asm-x86/scatterlist.h +++ b/include/asm-x86/scatterlist.h @@ -11,9 +11,7 @@ struct scatterlist { unsigned int offset; unsigned int length; dma_addr_t dma_address; -#ifdef CONFIG_X86_64 unsigned int dma_length; -#endif }; #define ARCH_HAS_SG_CHAIN diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 62ebdec3..1ebaa5c 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -199,7 +199,6 @@ static inline int hard_smp_processor_id(void) #ifdef CONFIG_HOTPLUG_CPU extern void cpu_exit_clear(void); extern void cpu_uninit(void); -extern void remove_siblinginfo(int cpu); #endif extern void smp_alloc_memory(void); diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index d5fd12f..77244f1 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -1,5 +1,14 @@ +#ifndef _ASM_X86_THREAD_INFO_H #ifdef CONFIG_X86_32 # include "thread_info_32.h" #else # include "thread_info_64.h" #endif + +#ifndef __ASSEMBLY__ +extern void arch_task_cache_init(void); +extern void free_thread_info(struct thread_info *ti); +extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src); +#define arch_task_cache_init arch_task_cache_init +#endif +#endif /* _ASM_X86_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h index 4e053fa..5318599 100644 --- a/include/asm-x86/thread_info_32.h +++ b/include/asm-x86/thread_info_32.h @@ -102,8 +102,6 @@ static inline struct thread_info *current_thread_info(void) __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) #endif -#define free_thread_info(info) free_pages((unsigned long)(info), get_order(THREAD_SIZE)) - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h index 1e5c6f6..ed664e8 100644 --- a/include/asm-x86/thread_info_64.h +++ b/include/asm-x86/thread_info_64.h @@ -85,8 +85,6 @@ static inline struct thread_info *stack_thread_info(void) #define alloc_thread_info(tsk) \ ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_ORDER) - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ @@ -126,6 +124,7 @@ static inline struct thread_info *stack_thread_info(void) #define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ #define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ #define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ +#define TIF_NOTSC 28 /* TSC is not accessible in userland */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -147,6 +146,7 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) #define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) #define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) +#define _TIF_NOTSC (1 << TIF_NOTSC) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ @@ -160,7 +160,7 @@ static inline struct thread_info *stack_thread_info(void) /* flags to check in __switch_to() */ #define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS) + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index 81a29eb..2207326 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -88,6 +88,17 @@ static inline int cpu_to_node(int cpu) #endif return per_cpu(x86_cpu_to_node_map, cpu); } + +#ifdef CONFIG_NUMA + +/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ +#define node_to_cpumask_ptr(v, node) \ + cpumask_t *v = &(node_to_cpumask_map[node]) + +#define node_to_cpumask_ptr_next(v, node) \ + v = &(node_to_cpumask_map[node]) +#endif + #endif /* CONFIG_X86_64 */ /* @@ -136,17 +147,13 @@ extern unsigned long node_remap_size[]; # define SD_CACHE_NICE_TRIES 2 # define SD_IDLE_IDX 2 -# define SD_NEWIDLE_IDX 0 +# define SD_NEWIDLE_IDX 2 # define SD_FORKEXEC_IDX 1 #endif /* sched_domains SD_NODE_INIT for NUMAQ machines */ #define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ .min_interval = 8, \ .max_interval = 32, \ .busy_factor = 32, \ @@ -164,7 +171,6 @@ extern unsigned long node_remap_size[]; | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ - .nr_balance_failed = 0, \ } #ifdef CONFIG_X86_64_ACPI_NUMA @@ -174,10 +180,10 @@ extern int __node_distance(int, int); #else /* CONFIG_NUMA */ -#include <asm-generic/topology.h> - #endif +#include <asm-generic/topology.h> + extern cpumask_t cpu_coregroup_map(int cpu); #ifdef ENABLE_TOPO_DEFINES diff --git a/include/crypto/aes.h b/include/crypto/aes.h index d480b76..40008d6 100644 --- a/include/crypto/aes.h +++ b/include/crypto/aes.h @@ -14,11 +14,13 @@ #define AES_KEYSIZE_192 24 #define AES_KEYSIZE_256 32 #define AES_BLOCK_SIZE 16 +#define AES_MAX_KEYLENGTH (15 * 16) +#define AES_MAX_KEYLENGTH_U32 (AES_MAX_KEYLENGTH / sizeof(u32)) struct crypto_aes_ctx { u32 key_length; - u32 key_enc[60]; - u32 key_dec[60]; + u32 key_enc[AES_MAX_KEYLENGTH_U32]; + u32 key_dec[AES_MAX_KEYLENGTH_U32]; }; extern u32 crypto_ft_tab[4][256]; @@ -28,4 +30,6 @@ extern u32 crypto_il_tab[4][256]; int crypto_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len); +int crypto_aes_expand_key(struct crypto_aes_ctx *ctx, const u8 *in_key, + unsigned int key_len); #endif diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h index 4ea429b..7609365 100644 --- a/include/keys/rxrpc-type.h +++ b/include/keys/rxrpc-type.h @@ -21,4 +21,4 @@ extern struct key_type key_type_rxrpc; extern struct key *rxrpc_get_null_key(const char *); -#endif /* _KEYS_USER_TYPE_H */ +#endif /* _KEYS_RXRPC_TYPE_H */ diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b3d9ccd..cbb5ccb 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -100,7 +100,7 @@ header-y += ixjuser.h header-y += jffs2.h header-y += keyctl.h header-y += limits.h -header-y += lock_dlm_plock.h +header-y += dlm_plock.h header-y += magic.h header-y += major.h header-y += matroxfb.h @@ -150,6 +150,7 @@ header-y += tiocl.h header-y += tipc.h header-y += tipc_config.h header-y += toshiba.h +header-y += udf_fs_i.h header-y += ultrasound.h header-y += un.h header-y += utime.h @@ -210,7 +211,9 @@ unifdef-y += hdlcdrv.h unifdef-y += hdlc.h unifdef-y += hdreg.h unifdef-y += hdsmart.h +unifdef-y += hid.h unifdef-y += hiddev.h +unifdef-y += hidraw.h unifdef-y += hpet.h unifdef-y += i2c.h unifdef-y += i2c-dev.h @@ -334,7 +337,6 @@ unifdef-y += time.h unifdef-y += timex.h unifdef-y += tty.h unifdef-y += types.h -unifdef-y += udf_fs_i.h unifdef-y += udp.h unifdef-y += uinput.h unifdef-y += uio.h diff --git a/include/linux/aer.h b/include/linux/aer.h index bcf236d..f251814 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -13,7 +13,6 @@ extern int pci_enable_pcie_error_reporting(struct pci_dev *dev); extern int pci_find_aer_capability(struct pci_dev *dev); extern int pci_disable_pcie_error_reporting(struct pci_dev *dev); extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); -extern int pci_cleanup_aer_correct_error_status(struct pci_dev *dev); #else static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) { @@ -31,10 +30,6 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) { return -EINVAL; } -static inline int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) -{ - return -EINVAL; -} #endif #endif //_AER_H_ diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h index b856a2a..9a26c83 100644 --- a/include/linux/ata_platform.h +++ b/include/linux/ata_platform.h @@ -27,7 +27,10 @@ extern int __devexit __pata_platform_remove(struct device *dev); /* * Marvell SATA private data */ +struct mbus_dram_target_info; + struct mv_sata_platform_data { + struct mbus_dram_target_info *dram; int n_ports; /* number of sata ports */ }; diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h new file mode 100644 index 0000000..53ba65e --- /dev/null +++ b/include/linux/atmel_tc.h @@ -0,0 +1,252 @@ +/* + * Timer/Counter Unit (TC) registers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ATMEL_TC_H +#define ATMEL_TC_H + +#include <linux/compiler.h> +#include <linux/list.h> + +/* + * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds + * three general-purpose 16-bit timers. These timers share one register bank. + * Depending on the SOC, each timer may have its own clock and IRQ, or those + * may be shared by the whole TC block. + * + * These TC blocks may have up to nine external pins: TCLK0..2 signals for + * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM + * or triggering. Those pins need to be set up for use with the TC block, + * else they will be used as GPIOs or for a different controller. + * + * Although we expect each TC block to have a platform_device node, those + * nodes are not what drivers bind to. Instead, they ask for a specific + * TC block, by number ... which is a common approach on systems with many + * timers. Then they use clk_get() and platform_get_irq() to get clock and + * IRQ resources. + */ + +struct clk; + +/** + * struct atmel_tc - information about a Timer/Counter Block + * @pdev: physical device + * @iomem: resource associated with the I/O register + * @regs: mapping through which the I/O registers can be accessed + * @irq: irq for each of the three channels + * @clk: internal clock source for each of the three channels + * @node: list node, for tclib internal use + * + * On some platforms, each TC channel has its own clocks and IRQs, + * while on others, all TC channels share the same clock and IRQ. + * Drivers should clk_enable() all the clocks they need even though + * all the entries in @clk may point to the same physical clock. + * Likewise, drivers should request irqs independently for each + * channel, but they must use IRQF_SHARED in case some of the entries + * in @irq are actually the same IRQ. + */ +struct atmel_tc { + struct platform_device *pdev; + struct resource *iomem; + void __iomem *regs; + int irq[3]; + struct clk *clk[3]; + struct list_head node; +}; + +extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name); +extern void atmel_tc_free(struct atmel_tc *tc); + +/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */ +extern const u8 atmel_tc_divisors[5]; + + +/* + * Two registers have block-wide controls. These are: configuring the three + * "external" clocks (or event sources) used by the timer channels; and + * synchronizing the timers by resetting them all at once. + * + * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2 + * signals. Or, it can mean "external to timer", using the TIOA output from + * one of the other two timers that's being run in waveform mode. + */ + +#define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */ +#define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */ + +#define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */ +#define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */ +#define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0) +#define ATMEL_TC_TC0XC0S_NONE (1 << 0) +#define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0) +#define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0) +#define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */ +#define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2) +#define ATMEL_TC_TC1XC1S_NONE (1 << 2) +#define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2) +#define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2) +#define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */ +#define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4) +#define ATMEL_TC_TC2XC2S_NONE (1 << 4) +#define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4) +#define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4) + + +/* + * Each TC block has three "channels", each with one counter and controls. + * + * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection + * when it's not "external") is silicon-specific. AT91 platforms use one + * set of definitions; AVR32 platforms use a different set. Don't hard-wire + * such knowledge into your code, use the global "atmel_tc_divisors" ... + * where index N is the divisor for clock N+1, else zero to indicate it uses + * the 32 KiHz clock. + * + * The timers can be chained in various ways, and operated in "waveform" + * generation mode (including PWM) or "capture" mode (to time events). In + * both modes, behavior can be configured in many ways. + * + * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a + * PWM output, and TIOB as either another PWM or as a trigger. Capture mode + * uses them only as inputs. + */ +#define ATMEL_TC_CHAN(idx) ((idx)*0x40) +#define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg) + +#define ATMEL_TC_CCR 0x00 /* Channel Control Register */ +#define ATMEL_TC_CLKEN (1 << 0) /* clock enable */ +#define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */ +#define ATMEL_TC_SWTRG (1 << 2) /* software trigger */ + +#define ATMEL_TC_CMR 0x04 /* Channel Mode Register */ + +/* Both modes share some CMR bits */ +#define ATMEL_TC_TCCLKS (7 << 0) /* clock source */ +#define ATMEL_TC_TIMER_CLOCK1 (0 << 0) +#define ATMEL_TC_TIMER_CLOCK2 (1 << 0) +#define ATMEL_TC_TIMER_CLOCK3 (2 << 0) +#define ATMEL_TC_TIMER_CLOCK4 (3 << 0) +#define ATMEL_TC_TIMER_CLOCK5 (4 << 0) +#define ATMEL_TC_XC0 (5 << 0) +#define ATMEL_TC_XC1 (6 << 0) +#define ATMEL_TC_XC2 (7 << 0) +#define ATMEL_TC_CLKI (1 << 3) /* clock invert */ +#define ATMEL_TC_BURST (3 << 4) /* clock gating */ +#define ATMEL_TC_GATE_NONE (0 << 4) +#define ATMEL_TC_GATE_XC0 (1 << 4) +#define ATMEL_TC_GATE_XC1 (2 << 4) +#define ATMEL_TC_GATE_XC2 (3 << 4) +#define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */ + +/* CAPTURE mode CMR bits */ +#define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */ +#define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */ +#define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */ +#define ATMEL_TC_ETRGEDG_NONE (0 << 8) +#define ATMEL_TC_ETRGEDG_RISING (1 << 8) +#define ATMEL_TC_ETRGEDG_FALLING (2 << 8) +#define ATMEL_TC_ETRGEDG_BOTH (3 << 8) +#define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */ +#define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */ +#define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */ +#define ATMEL_TC_LDRA_NONE (0 << 16) +#define ATMEL_TC_LDRA_RISING (1 << 16) +#define ATMEL_TC_LDRA_FALLING (2 << 16) +#define ATMEL_TC_LDRA_BOTH (3 << 16) +#define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */ +#define ATMEL_TC_LDRB_NONE (0 << 18) +#define ATMEL_TC_LDRB_RISING (1 << 18) +#define ATMEL_TC_LDRB_FALLING (2 << 18) +#define ATMEL_TC_LDRB_BOTH (3 << 18) + +/* WAVEFORM mode CMR bits */ +#define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */ +#define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */ +#define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */ +#define ATMEL_TC_EEVTEDG_NONE (0 << 8) +#define ATMEL_TC_EEVTEDG_RISING (1 << 8) +#define ATMEL_TC_EEVTEDG_FALLING (2 << 8) +#define ATMEL_TC_EEVTEDG_BOTH (3 << 8) +#define ATMEL_TC_EEVT (3 << 10) /* external event source */ +#define ATMEL_TC_EEVT_TIOB (0 << 10) +#define ATMEL_TC_EEVT_XC0 (1 << 10) +#define ATMEL_TC_EEVT_XC1 (2 << 10) +#define ATMEL_TC_EEVT_XC2 (3 << 10) +#define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */ +#define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */ +#define ATMEL_TC_WAVESEL_UP (0 << 13) +#define ATMEL_TC_WAVESEL_UPDOWN (1 << 13) +#define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13) +#define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13) +#define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */ +#define ATMEL_TC_ACPA_NONE (0 << 16) +#define ATMEL_TC_ACPA_SET (1 << 16) +#define ATMEL_TC_ACPA_CLEAR (2 << 16) +#define ATMEL_TC_ACPA_TOGGLE (3 << 16) +#define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */ +#define ATMEL_TC_ACPC_NONE (0 << 18) +#define ATMEL_TC_ACPC_SET (1 << 18) +#define ATMEL_TC_ACPC_CLEAR (2 << 18) +#define ATMEL_TC_ACPC_TOGGLE (3 << 18) +#define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */ +#define ATMEL_TC_AEEVT_NONE (0 << 20) +#define ATMEL_TC_AEEVT_SET (1 << 20) +#define ATMEL_TC_AEEVT_CLEAR (2 << 20) +#define ATMEL_TC_AEEVT_TOGGLE (3 << 20) +#define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */ +#define ATMEL_TC_ASWTRG_NONE (0 << 22) +#define ATMEL_TC_ASWTRG_SET (1 << 22) +#define ATMEL_TC_ASWTRG_CLEAR (2 << 22) +#define ATMEL_TC_ASWTRG_TOGGLE (3 << 22) +#define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */ +#define ATMEL_TC_BCPB_NONE (0 << 24) +#define ATMEL_TC_BCPB_SET (1 << 24) +#define ATMEL_TC_BCPB_CLEAR (2 << 24) +#define ATMEL_TC_BCPB_TOGGLE (3 << 24) +#define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */ +#define ATMEL_TC_BCPC_NONE (0 << 26) +#define ATMEL_TC_BCPC_SET (1 << 26) +#define ATMEL_TC_BCPC_CLEAR (2 << 26) +#define ATMEL_TC_BCPC_TOGGLE (3 << 26) +#define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */ +#define ATMEL_TC_BEEVT_NONE (0 << 28) +#define ATMEL_TC_BEEVT_SET (1 << 28) +#define ATMEL_TC_BEEVT_CLEAR (2 << 28) +#define ATMEL_TC_BEEVT_TOGGLE (3 << 28) +#define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */ +#define ATMEL_TC_BSWTRG_NONE (0 << 30) +#define ATMEL_TC_BSWTRG_SET (1 << 30) +#define ATMEL_TC_BSWTRG_CLEAR (2 << 30) +#define ATMEL_TC_BSWTRG_TOGGLE (3 << 30) + +#define ATMEL_TC_CV 0x10 /* counter Value */ +#define ATMEL_TC_RA 0x14 /* register A */ +#define ATMEL_TC_RB 0x18 /* register B */ +#define ATMEL_TC_RC 0x1c /* register C */ + +#define ATMEL_TC_SR 0x20 /* status (read-only) */ +/* Status-only flags */ +#define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */ +#define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */ +#define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */ + +#define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */ +#define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */ +#define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */ + +/* Status and IRQ flags */ +#define ATMEL_TC_COVFS (1 << 0) /* counter overflow */ +#define ATMEL_TC_LOVRS (1 << 1) /* load overrun */ +#define ATMEL_TC_CPAS (1 << 2) /* RA compare */ +#define ATMEL_TC_CPBS (1 << 3) /* RB compare */ +#define ATMEL_TC_CPCS (1 << 4) /* RC compare */ +#define ATMEL_TC_LDRAS (1 << 5) /* RA loading */ +#define ATMEL_TC_LDRBS (1 << 6) /* RB loading */ +#define ATMEL_TC_ETRGS (1 << 7) /* external trigger */ + +#endif diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index 574b201..794ad74 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -1,5 +1,5 @@ /* - * class_container.h - a generic container for all classes + * attribute_container.h - a generic container for all classes * * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com> * @@ -18,7 +18,7 @@ struct attribute_container { struct klist containers; struct class *class; struct attribute_group *grp; - struct class_device_attribute **attrs; + struct device_attribute **attrs; int (*match)(struct attribute_container *, struct device *); #define ATTRIBUTE_CONTAINER_NO_CLASSDEVS 0x01 unsigned long flags; @@ -41,31 +41,31 @@ int __must_check attribute_container_unregister(struct attribute_container *cont void attribute_container_create_device(struct device *dev, int (*fn)(struct attribute_container *, struct device *, - struct class_device *)); + struct device *)); void attribute_container_add_device(struct device *dev, int (*fn)(struct attribute_container *, struct device *, - struct class_device *)); + struct device *)); void attribute_container_remove_device(struct device *dev, void (*fn)(struct attribute_container *, struct device *, - struct class_device *)); + struct device *)); void attribute_container_device_trigger(struct device *dev, int (*fn)(struct attribute_container *, struct device *, - struct class_device *)); + struct device *)); void attribute_container_trigger(struct device *dev, int (*fn)(struct attribute_container *, struct device *)); -int attribute_container_add_attrs(struct class_device *classdev); -int attribute_container_add_class_device(struct class_device *classdev); +int attribute_container_add_attrs(struct device *classdev); +int attribute_container_add_class_device(struct device *classdev); int attribute_container_add_class_device_adapter(struct attribute_container *cont, struct device *dev, - struct class_device *classdev); -void attribute_container_remove_attrs(struct class_device *classdev); -void attribute_container_class_device_del(struct class_device *classdev); -struct attribute_container *attribute_container_classdev_to_container(struct class_device *); -struct class_device *attribute_container_find_class_device(struct attribute_container *, struct device *); -struct class_device_attribute **attribute_container_classdev_to_attrs(const struct class_device *classdev); + struct device *classdev); +void attribute_container_remove_attrs(struct device *classdev); +void attribute_container_class_device_del(struct device *classdev); +struct attribute_container *attribute_container_classdev_to_container(struct device *); +struct device *attribute_container_find_class_device(struct attribute_container *, struct device *); +struct device_attribute **attribute_container_classdev_to_attrs(const struct device *classdev); #endif diff --git a/include/linux/bio.h b/include/linux/bio.h index 4c59bdc..d259690 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -327,6 +327,8 @@ extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, extern void bio_set_pages_dirty(struct bio *bio); extern void bio_check_pages_dirty(struct bio *bio); extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); +extern struct bio *bio_copy_user_iov(struct request_queue *, struct sg_iovec *, + int, int); extern int bio_uncopy_user(struct bio *); void zero_fill_bio(struct bio *bio); diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index acad110..1dbe074 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -108,6 +108,7 @@ extern int __bitmap_weight(const unsigned long *bitmap, int bits); extern int bitmap_scnprintf(char *buf, unsigned int len, const unsigned long *src, int nbits); +extern int bitmap_scnprintf_len(unsigned int len); extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user, unsigned long *dst, int nbits); extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6f79d40..c5065e3 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -112,6 +112,7 @@ enum rq_flag_bits { __REQ_RW_SYNC, /* request is sync (O_DIRECT) */ __REQ_ALLOCED, /* request came from our alloc pool */ __REQ_RW_META, /* metadata io request */ + __REQ_COPY_USER, /* contains copies of user pages */ __REQ_NR_BITS, /* stops here */ }; @@ -133,6 +134,7 @@ enum rq_flag_bits { #define REQ_RW_SYNC (1 << __REQ_RW_SYNC) #define REQ_ALLOCED (1 << __REQ_ALLOCED) #define REQ_RW_META (1 << __REQ_RW_META) +#define REQ_COPY_USER (1 << __REQ_COPY_USER) #define BLK_MAX_CDB 16 @@ -533,8 +535,13 @@ extern unsigned long blk_max_low_pfn, blk_max_pfn; * BLK_BOUNCE_ANY : don't bounce anything * BLK_BOUNCE_ISA : bounce pages above ISA DMA boundary */ + +#if BITS_PER_LONG == 32 #define BLK_BOUNCE_HIGH ((u64)blk_max_low_pfn << PAGE_SHIFT) -#define BLK_BOUNCE_ANY ((u64)blk_max_pfn << PAGE_SHIFT) +#else +#define BLK_BOUNCE_HIGH -1ULL +#endif +#define BLK_BOUNCE_ANY (-1ULL) #define BLK_BOUNCE_ISA (ISA_DMA_THRESHOLD) /* diff --git a/include/linux/bsg.h b/include/linux/bsg.h index 60e377b52..e8406c5 100644 --- a/include/linux/bsg.h +++ b/include/linux/bsg.h @@ -55,7 +55,7 @@ struct sg_io_v4 { #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device { - struct class_device *class_dev; + struct device *class_dev; struct device *dev; int minor; struct request_queue *queue; diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index a5cd204..5db265e 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -910,6 +910,7 @@ struct mode_page_header { #ifdef __KERNEL__ #include <linux/fs.h> /* not really needed, later.. */ #include <linux/device.h> +#include <linux/list.h> struct packet_command { @@ -934,7 +935,7 @@ struct packet_command /* Uniform cdrom data structures for cdrom.c */ struct cdrom_device_info { struct cdrom_device_ops *ops; /* link to device_ops */ - struct cdrom_device_info *next; /* next device_info for this major */ + struct list_head list; /* linked list of all device_info */ struct gendisk *disk; /* matching block layer disk */ void *handle; /* driver-dependent data */ /* specifications */ @@ -994,7 +995,7 @@ extern int cdrom_ioctl(struct file *file, struct cdrom_device_info *cdi, extern int cdrom_media_changed(struct cdrom_device_info *); extern int register_cdrom(struct cdrom_device_info *cdi); -extern int unregister_cdrom(struct cdrom_device_info *cdi); +extern void unregister_cdrom(struct cdrom_device_info *cdi); typedef struct { int data; diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 0be8d65..f212fa9 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -23,7 +23,6 @@ #include <linux/node.h> #include <linux/compiler.h> #include <linux/cpumask.h> -#include <asm/semaphore.h> #include <linux/mutex.h> struct cpu { diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 7047f58..259c805 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -222,8 +222,13 @@ int __next_cpu(int n, const cpumask_t *srcp); #define next_cpu(n, src) ({ (void)(src); 1; }) #endif +#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP +extern cpumask_t *cpumask_of_cpu_map; +#define cpumask_of_cpu(cpu) (cpumask_of_cpu_map[cpu]) + +#else #define cpumask_of_cpu(cpu) \ -({ \ +(*({ \ typeof(_unused_cpumask_arg_) m; \ if (sizeof(m) == sizeof(unsigned long)) { \ m.bits[0] = 1UL<<(cpu); \ @@ -231,8 +236,9 @@ int __next_cpu(int n, const cpumask_t *srcp); cpus_clear(m); \ cpu_set((cpu), m); \ } \ - m; \ -}) + &m; \ +})) +#endif #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) @@ -243,6 +249,8 @@ int __next_cpu(int n, const cpumask_t *srcp); [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ } } +#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) + #else #define CPU_MASK_ALL \ @@ -251,6 +259,10 @@ int __next_cpu(int n, const cpumask_t *srcp); [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ } } +/* cpu_mask_all is in init/main.c */ +extern cpumask_t cpu_mask_all; +#define CPU_MASK_ALL_PTR (&cpu_mask_all) + #endif #define CPU_MASK_NONE \ @@ -273,6 +285,13 @@ static inline int __cpumask_scnprintf(char *buf, int len, return bitmap_scnprintf(buf, len, srcp->bits, nbits); } +#define cpumask_scnprintf_len(len) \ + __cpumask_scnprintf_len((len)) +static inline int __cpumask_scnprintf_len(int len) +{ + return bitmap_scnprintf_len(len); +} + #define cpumask_parse_user(ubuf, ulen, dst) \ __cpumask_parse_user((ubuf), (ulen), &(dst), NR_CPUS) static inline int __cpumask_parse_user(const char __user *buf, int len, diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 0a26be3..726761e 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -20,8 +20,8 @@ extern int number_of_cpusets; /* How many cpusets are defined in system? */ extern int cpuset_init_early(void); extern int cpuset_init(void); extern void cpuset_init_smp(void); -extern cpumask_t cpuset_cpus_allowed(struct task_struct *p); -extern cpumask_t cpuset_cpus_allowed_locked(struct task_struct *p); +extern void cpuset_cpus_allowed(struct task_struct *p, cpumask_t *mask); +extern void cpuset_cpus_allowed_locked(struct task_struct *p, cpumask_t *mask); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); #define cpuset_current_mems_allowed (current->mems_allowed) void cpuset_init_current_mems_allowed(void); @@ -84,13 +84,14 @@ static inline int cpuset_init_early(void) { return 0; } static inline int cpuset_init(void) { return 0; } static inline void cpuset_init_smp(void) {} -static inline cpumask_t cpuset_cpus_allowed(struct task_struct *p) +static inline void cpuset_cpus_allowed(struct task_struct *p, cpumask_t *mask) { - return cpu_possible_map; + *mask = cpu_possible_map; } -static inline cpumask_t cpuset_cpus_allowed_locked(struct task_struct *p) +static inline void cpuset_cpus_allowed_locked(struct task_struct *p, + cpumask_t *mask) { - return cpu_possible_map; + *mask = cpu_possible_map; } static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 5e02d1b..425824b 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -317,14 +317,7 @@ int crypto_unregister_alg(struct crypto_alg *alg); /* * Algorithm query interface. */ -#ifdef CONFIG_CRYPTO int crypto_has_alg(const char *name, u32 type, u32 mask); -#else -static inline int crypto_has_alg(const char *name, u32 type, u32 mask) -{ - return 0; -} -#endif /* * Transforms: user-instantiated objects which encapsulate algorithms diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 6bd6460..cfb1627 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -301,7 +301,9 @@ extern int d_validate(struct dentry *, struct dentry *); */ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); +extern char *__d_path(const struct path *path, struct path *root, char *, int); extern char *d_path(struct path *, char *, int); +extern char *dentry_path(struct dentry *, char *, int); /* Allocation counts.. */ @@ -359,7 +361,6 @@ static inline int d_mountpoint(struct dentry *dentry) } extern struct vfsmount *lookup_mnt(struct vfsmount *, struct dentry *); -extern struct vfsmount *__lookup_mnt(struct vfsmount *, struct dentry *, int); extern struct dentry *lookup_create(struct nameidata *nd, int is_dir); extern int sysctl_vfs_cache_pressure; diff --git a/include/linux/device.h b/include/linux/device.h index 2258d89..1a06026 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -20,7 +20,7 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/pm.h> -#include <asm/semaphore.h> +#include <linux/semaphore.h> #include <asm/atomic.h> #include <asm/device.h> @@ -429,7 +429,6 @@ struct device { struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ struct device_type *type; - unsigned is_registered:1; unsigned uevent_suppress:1; struct semaphore sem; /* semaphore to synchronize calls to @@ -475,6 +474,9 @@ struct device { void (*release)(struct device *dev); }; +/* Get the wakeup routines, which depend on struct device */ +#include <linux/pm_wakeup.h> + #ifdef CONFIG_NUMA static inline int dev_to_node(struct device *dev) { @@ -506,7 +508,7 @@ static inline void dev_set_drvdata(struct device *dev, void *data) static inline int device_is_registered(struct device *dev) { - return dev->is_registered; + return dev->kobj.state_in_sysfs; } void driver_init(void); @@ -543,20 +545,6 @@ extern struct device *device_create(struct class *cls, struct device *parent, dev_t devt, const char *fmt, ...) __attribute__((format(printf, 4, 5))); extern void device_destroy(struct class *cls, dev_t devt); -#ifdef CONFIG_PM_SLEEP -extern void destroy_suspended_device(struct class *cls, dev_t devt); -extern void device_pm_schedule_removal(struct device *); -#else /* !CONFIG_PM_SLEEP */ -static inline void destroy_suspended_device(struct class *cls, dev_t devt) -{ - device_destroy(cls, devt); -} - -static inline void device_pm_schedule_removal(struct device *dev) -{ - device_unregister(dev); -} -#endif /* !CONFIG_PM_SLEEP */ /* * Platform "fixup" functions - allow the platform to have their say @@ -608,21 +596,16 @@ extern const char *dev_driver_string(struct device *dev); #define dev_dbg(dev, format, arg...) \ dev_printk(KERN_DEBUG , dev , format , ## arg) #else -static inline int __attribute__ ((format (printf, 2, 3))) -dev_dbg(struct device *dev, const char *fmt, ...) -{ - return 0; -} +#define dev_dbg(dev, format, arg...) \ + ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; }) #endif #ifdef VERBOSE_DEBUG #define dev_vdbg dev_dbg #else -static inline int __attribute__ ((format (printf, 2, 3))) -dev_vdbg(struct device *dev, const char *fmt, ...) -{ - return 0; -} + +#define dev_vdbg(dev, format, arg...) \ + ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; }) #endif /* Create alias, so I can be autoloaded. */ diff --git a/include/linux/dlm.h b/include/linux/dlm.h index c743fbc..203a025 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -21,10 +21,7 @@ /* Lock levels and flags are here */ #include <linux/dlmconstants.h> - - -#define DLM_RESNAME_MAXLEN 64 - +#include <linux/types.h> typedef void dlm_lockspace_t; @@ -63,7 +60,7 @@ typedef void dlm_lockspace_t; struct dlm_lksb { int sb_status; - uint32_t sb_lkid; + __u32 sb_lkid; char sb_flags; char * sb_lvbptr; }; diff --git a/include/linux/dlm_device.h b/include/linux/dlm_device.h index 9642277..c603450 100644 --- a/include/linux/dlm_device.h +++ b/include/linux/dlm_device.h @@ -11,10 +11,16 @@ ******************************************************************************* ******************************************************************************/ +#ifndef _LINUX_DLM_DEVICE_H +#define _LINUX_DLM_DEVICE_H + /* This is the device interface for dlm, most users will use a library * interface. */ +#include <linux/dlm.h> +#include <linux/types.h> + #define DLM_USER_LVB_LEN 32 /* Version of the device interface */ @@ -94,10 +100,9 @@ struct dlm_lock_result { #define DLM_USER_PURGE 6 #define DLM_USER_DEADLOCK 7 -/* Arbitrary length restriction */ -#define MAX_LS_NAME_LEN 64 - /* Lockspace flags */ #define DLM_USER_LSFLG_AUTOFREE 1 #define DLM_USER_LSFLG_FORCEFREE 2 +#endif + diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h new file mode 100644 index 0000000..18d5fdb --- /dev/null +++ b/include/linux/dlm_plock.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + */ + +#ifndef __DLM_PLOCK_DOT_H__ +#define __DLM_PLOCK_DOT_H__ + +#define DLM_PLOCK_MISC_NAME "dlm_plock" + +#define DLM_PLOCK_VERSION_MAJOR 1 +#define DLM_PLOCK_VERSION_MINOR 1 +#define DLM_PLOCK_VERSION_PATCH 0 + +enum { + DLM_PLOCK_OP_LOCK = 1, + DLM_PLOCK_OP_UNLOCK, + DLM_PLOCK_OP_GET, +}; + +struct dlm_plock_info { + __u32 version[3]; + __u8 optype; + __u8 ex; + __u8 wait; + __u8 pad; + __u32 pid; + __s32 nodeid; + __s32 rv; + __u32 fsid; + __u64 number; + __u64 start; + __u64 end; + __u64 owner; +}; + +#ifdef __KERNEL__ +int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file, + int cmd, struct file_lock *fl); +int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file, + struct file_lock *fl); +int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, + struct file_lock *fl); +#endif /* __KERNEL__ */ + +#endif + diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h index fddb3d3..47bf08d 100644 --- a/include/linux/dlmconstants.h +++ b/include/linux/dlmconstants.h @@ -18,6 +18,10 @@ * Constants used by DLM interface. */ +#define DLM_LOCKSPACE_LEN 64 +#define DLM_RESNAME_MAXLEN 64 + + /* * Lock Modes */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index b4d84ed..d08a5c5 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -404,7 +404,7 @@ static inline enum dma_status dma_async_is_tx_complete(struct dma_chan *chan, * @last_used: last cookie value handed out * * dma_async_is_complete() is used in dma_async_memcpy_complete() - * the test logic is seperated for lightweight testing of multiple cookies + * the test logic is separated for lightweight testing of multiple cookies */ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie, dma_cookie_t last_complete, dma_cookie_t last_used) diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index c6a2353..402fb7a 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -39,9 +39,10 @@ typedef enum DMX_OUT_DECODER, /* Streaming directly to decoder. */ DMX_OUT_TAP, /* Output going to a memory buffer */ /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP /* Output multiplexed into a new TS */ + DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ /* (to be retrieved by reading from the */ /* logical DVR device). */ + DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ } dmx_output_t; diff --git a/include/linux/efi.h b/include/linux/efi.h index 14813b5..a5f359a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -18,6 +18,7 @@ #include <linux/proc_fs.h> #include <linux/rtc.h> #include <linux/ioport.h> +#include <linux/pfn.h> #include <asm/page.h> #include <asm/system.h> @@ -394,4 +395,10 @@ struct efi_generic_dev_path { u16 length; } __attribute ((packed)); +static inline void memrange_efi_to_native(u64 *addr, u64 *npages) +{ + *npages = PFN_UP(*addr + (*npages<<EFI_PAGE_SHIFT)) - PFN_DOWN(*addr); + *addr &= PAGE_MASK; +} + #endif /* _LINUX_EFI_H */ diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index a5978f1..4332442 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -82,7 +82,8 @@ struct enclosure_component_callbacks { struct enclosure_component { void *scratch; - struct class_device cdev; + struct device cdev; + struct device *dev; enum enclosure_component_type type; int number; int fault; @@ -94,20 +95,20 @@ struct enclosure_component { struct enclosure_device { void *scratch; struct list_head node; - struct class_device cdev; + struct device edev; struct enclosure_component_callbacks *cb; int components; struct enclosure_component component[0]; }; static inline struct enclosure_device * -to_enclosure_device(struct class_device *dev) +to_enclosure_device(struct device *dev) { - return container_of(dev, struct enclosure_device, cdev); + return container_of(dev, struct enclosure_device, edev); } static inline struct enclosure_component * -to_enclosure_component(struct class_device *dev) +to_enclosure_component(struct device *dev) { return container_of(dev, struct enclosure_component, cdev); } diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index adcbb05..de8387b 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -43,7 +43,7 @@ struct fid { u32 parent_ino; u32 parent_gen; } i32; - __u32 raw[6]; + __u32 raw[0]; }; }; diff --git a/include/linux/file.h b/include/linux/file.h index 7239baa..65347702 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -61,6 +61,7 @@ extern struct kmem_cache *filp_cachep; extern void __fput(struct file *); extern void fput(struct file *); +extern void drop_file_write_access(struct file *file); struct file_operations; struct vfsmount; diff --git a/include/linux/fs.h b/include/linux/fs.h index b84b848..6556f2f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -287,9 +287,9 @@ extern int dir_notify_enable; #include <linux/pid.h> #include <linux/mutex.h> #include <linux/capability.h> +#include <linux/semaphore.h> #include <asm/atomic.h> -#include <asm/semaphore.h> #include <asm/byteorder.h> struct export_operations; @@ -305,7 +305,6 @@ struct vfsmount; extern void __init inode_init(void); extern void __init inode_init_early(void); -extern void __init mnt_init(void); extern void __init files_init(unsigned long); struct buffer_head; @@ -776,6 +775,9 @@ static inline int ra_has_index(struct file_ra_state *ra, pgoff_t index) index < ra->start + ra->size); } +#define FILE_MNT_WRITE_TAKEN 1 +#define FILE_MNT_WRITE_RELEASED 2 + struct file { /* * fu_list becomes invalid after file_free is called and queued via @@ -810,6 +812,9 @@ struct file { spinlock_t f_ep_lock; #endif /* #ifdef CONFIG_EPOLL */ struct address_space *f_mapping; +#ifdef CONFIG_DEBUG_WRITECOUNT + unsigned long f_mnt_write_state; +#endif }; extern spinlock_t files_lock; #define file_list_lock() spin_lock(&files_lock); @@ -818,6 +823,49 @@ extern spinlock_t files_lock; #define get_file(x) atomic_inc(&(x)->f_count) #define file_count(x) atomic_read(&(x)->f_count) +#ifdef CONFIG_DEBUG_WRITECOUNT +static inline void file_take_write(struct file *f) +{ + WARN_ON(f->f_mnt_write_state != 0); + f->f_mnt_write_state = FILE_MNT_WRITE_TAKEN; +} +static inline void file_release_write(struct file *f) +{ + f->f_mnt_write_state |= FILE_MNT_WRITE_RELEASED; +} +static inline void file_reset_write(struct file *f) +{ + f->f_mnt_write_state = 0; +} +static inline void file_check_state(struct file *f) +{ + /* + * At this point, either both or neither of these bits + * should be set. + */ + WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN); + WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_RELEASED); +} +static inline int file_check_writeable(struct file *f) +{ + if (f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN) + return 0; + printk(KERN_WARNING "writeable file with no " + "mnt_want_write()\n"); + WARN_ON(1); + return -EINVAL; +} +#else /* !CONFIG_DEBUG_WRITECOUNT */ +static inline void file_take_write(struct file *filp) {} +static inline void file_release_write(struct file *filp) {} +static inline void file_reset_write(struct file *filp) {} +static inline void file_check_state(struct file *filp) {} +static inline int file_check_writeable(struct file *filp) +{ + return 0; +} +#endif /* CONFIG_DEBUG_WRITECOUNT */ + #define MAX_NON_LFS ((1UL<<31) - 1) /* Page cache limit. The filesystems should put that into their s_maxbytes @@ -925,6 +973,7 @@ extern int do_sync_mapping_range(struct address_space *mapping, loff_t offset, /* fs/locks.c */ extern void locks_init_lock(struct file_lock *); extern void locks_copy_lock(struct file_lock *, struct file_lock *); +extern void __locks_copy_lock(struct file_lock *, const struct file_lock *); extern void locks_remove_posix(struct file *, fl_owner_t); extern void locks_remove_flock(struct file *); extern void posix_test_lock(struct file *, struct file_lock *); @@ -1487,12 +1536,7 @@ extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data); #define kern_mount(type) kern_mount_data(type, NULL) extern int may_umount_tree(struct vfsmount *); extern int may_umount(struct vfsmount *); -extern void umount_tree(struct vfsmount *, int, struct list_head *); -extern void release_mounts(struct list_head *); extern long do_mount(char *, char *, char *, unsigned long, void *); -extern struct vfsmount *copy_tree(struct vfsmount *, struct dentry *, int); -extern void mnt_set_mountpoint(struct vfsmount *, struct dentry *, - struct vfsmount *); extern struct vfsmount *collect_mounts(struct vfsmount *, struct dentry *); extern void drop_collected_mounts(struct vfsmount *); @@ -1735,7 +1779,8 @@ extern struct file *create_read_pipe(struct file *f); extern struct file *create_write_pipe(void); extern void free_write_pipe(struct file *); -extern int open_namei(int dfd, const char *, int, int, struct nameidata *); +extern struct file *do_filp_open(int dfd, const char *pathname, + int open_flag, int mode); extern int may_open(struct nameidata *, int, int); extern int kernel_read(struct file *, unsigned long, char *, unsigned long); diff --git a/include/linux/hid.h b/include/linux/hid.h index 74ff575..d951ec4 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -284,6 +284,7 @@ struct hid_item { #define HID_QUIRK_2WHEEL_MOUSE_HACK_B8 0x02000000 #define HID_QUIRK_HWHEEL_WHEEL_INVERT 0x04000000 #define HID_QUIRK_MICROSOFT_KEYS 0x08000000 +#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000 /* * Separate quirks for runtime report descriptor fixup @@ -296,6 +297,8 @@ struct hid_item { #define HID_QUIRK_RDESC_MACBOOK_JIS 0x00000010 #define HID_QUIRK_RDESC_BUTTON_CONSUMER 0x00000020 #define HID_QUIRK_RDESC_SAMSUNG_REMOTE 0x00000040 +#define HID_QUIRK_RDESC_MICROSOFT_RECV_1028 0x00000080 +#define HID_QUIRK_RDESC_SUNPLUS_WDESKTOP 0x00000100 /* * This is the global environment of the parser. This information is @@ -320,7 +323,7 @@ struct hid_global { * This is the local environment. It is persistent up the next main-item. */ -#define HID_MAX_USAGES 8192 +#define HID_MAX_USAGES 12288 #define HID_DEFAULT_NUM_COLLECTIONS 16 struct hid_local { @@ -421,6 +424,7 @@ struct hid_control_fifo { #define HID_RESET_PENDING 4 #define HID_SUSPENDED 5 #define HID_CLEAR_HALT 6 +#define HID_DISCONNECTED 7 struct hid_input { struct list_head list; @@ -452,8 +456,6 @@ struct hid_device { /* device report descriptor */ void *hidraw; int minor; /* Hiddev minor number */ - wait_queue_head_t wait; /* For sleeping */ - int open; /* is the device open by anyone? */ char name[128]; /* Device name */ char phys[64]; /* Device physical location */ @@ -530,14 +532,12 @@ int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int int hidinput_mapping_quirks(struct hid_usage *, struct input_dev *, unsigned long **, int *); int hidinput_event_quirks(struct hid_device *, struct hid_field *, struct hid_usage *, __s32); int hidinput_apple_event(struct hid_device *, struct input_dev *, struct hid_usage *, __s32); -void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt); void hid_output_report(struct hid_report *report, __u8 *data); void hid_free_device(struct hid_device *device); struct hid_device *hid_parse_report(__u8 *start, unsigned size); /* HID quirks API */ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct); -int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct, const u32 quirks); int usbhid_quirks_init(char **quirks_param); void usbhid_quirks_exit(void); void usbhid_fixup_report_descriptor(const u16, const u16, char *, unsigned, char **); @@ -546,6 +546,7 @@ void usbhid_fixup_report_descriptor(const u16, const u16, char *, unsigned, char int hid_ff_init(struct hid_device *hid); int hid_lgff_init(struct hid_device *hid); +int hid_lg2ff_init(struct hid_device *hid); int hid_plff_init(struct hid_device *hid); int hid_tmff_init(struct hid_device *hid); int hid_zpff_init(struct hid_device *hid); @@ -566,7 +567,11 @@ static inline int hid_ff_init(struct hid_device *hid) { return -1; } #define dbg_hid_line(format, arg...) if (hid_debug) \ printk(format, ## arg) #else -#define dbg_hid(format, arg...) do {} while (0) +static inline int __attribute__((format(printf, 1, 2))) +dbg_hid(const char *fmt, ...) +{ + return 0; +} #define dbg_hid_line dbg_hid #endif diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h index 0536f29..dbb5c8c 100644 --- a/include/linux/hidraw.h +++ b/include/linux/hidraw.h @@ -16,6 +16,7 @@ */ #include <linux/hid.h> +#include <linux/types.h> struct hidraw_report_descriptor { __u32 size; diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h index 8df29ca..394a840 100644 --- a/include/linux/hil_mlc.h +++ b/include/linux/hil_mlc.h @@ -34,7 +34,7 @@ #include <linux/hil.h> #include <linux/time.h> #include <linux/interrupt.h> -#include <asm/semaphore.h> +#include <linux/semaphore.h> #include <linux/serio.h> #include <linux/list.h> diff --git a/include/linux/hw_random.h b/include/linux/hw_random.h index 4213182..85d1191 100644 --- a/include/linux/hw_random.h +++ b/include/linux/hw_random.h @@ -44,15 +44,7 @@ struct hwrng { /** Register a new Hardware Random Number Generator driver. */ extern int hwrng_register(struct hwrng *rng); /** Unregister a Hardware Random Number Generator driver. */ -extern void __hwrng_unregister(struct hwrng *rng, bool suspended); -static inline void hwrng_unregister(struct hwrng *rng) -{ - __hwrng_unregister(rng, false); -} -static inline void hwrng_unregister_suspended(struct hwrng *rng) -{ - __hwrng_unregister(rng, true); -} +extern void hwrng_unregister(struct hwrng *rng); #endif /* __KERNEL__ */ #endif /* LINUX_HWRANDOM_H_ */ diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index fce47c0..adcb3dc 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -1,14 +1,41 @@ #ifndef _LINUX_I2C_ALGO_PCA_H #define _LINUX_I2C_ALGO_PCA_H +/* Clock speeds for the bus */ +#define I2C_PCA_CON_330kHz 0x00 +#define I2C_PCA_CON_288kHz 0x01 +#define I2C_PCA_CON_217kHz 0x02 +#define I2C_PCA_CON_146kHz 0x03 +#define I2C_PCA_CON_88kHz 0x04 +#define I2C_PCA_CON_59kHz 0x05 +#define I2C_PCA_CON_44kHz 0x06 +#define I2C_PCA_CON_36kHz 0x07 + +/* PCA9564 registers */ +#define I2C_PCA_STA 0x00 /* STATUS Read Only */ +#define I2C_PCA_TO 0x00 /* TIMEOUT Write Only */ +#define I2C_PCA_DAT 0x01 /* DATA Read/Write */ +#define I2C_PCA_ADR 0x02 /* OWN ADR Read/Write */ +#define I2C_PCA_CON 0x03 /* CONTROL Read/Write */ + +#define I2C_PCA_CON_AA 0x80 /* Assert Acknowledge */ +#define I2C_PCA_CON_ENSIO 0x40 /* Enable */ +#define I2C_PCA_CON_STA 0x20 /* Start */ +#define I2C_PCA_CON_STO 0x10 /* Stop */ +#define I2C_PCA_CON_SI 0x08 /* Serial Interrupt */ +#define I2C_PCA_CON_CR 0x07 /* Clock Rate (MASK) */ + struct i2c_algo_pca_data { - int (*get_own) (struct i2c_algo_pca_data *adap); /* Obtain own address */ - int (*get_clock) (struct i2c_algo_pca_data *adap); - void (*write_byte) (struct i2c_algo_pca_data *adap, int reg, int val); - int (*read_byte) (struct i2c_algo_pca_data *adap, int reg); - int (*wait_for_interrupt) (struct i2c_algo_pca_data *adap); + void *data; /* private low level data */ + void (*write_byte) (void *data, int reg, int val); + int (*read_byte) (void *data, int reg); + int (*wait_for_completion) (void *data); + void (*reset_chip) (void *data); + /* i2c_clock values are defined in linux/i2c-algo-pca.h */ + unsigned int i2c_clock; }; int i2c_pca_add_bus(struct i2c_adapter *); +int i2c_pca_add_numbered_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCA_H */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index b979112..32eb8bb 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -125,6 +125,7 @@ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ #define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ +#define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ /* --- PCF 8584 based algorithms */ #define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h new file mode 100644 index 0000000..3d19187 --- /dev/null +++ b/include/linux/i2c-pca-platform.h @@ -0,0 +1,12 @@ +#ifndef I2C_PCA9564_PLATFORM_H +#define I2C_PCA9564_PLATFORM_H + +struct i2c_pca9564_pf_platform_data { + int gpio; /* pin to reset chip. driver will work when + * not supplied (negative value), but it + * cannot exit some error conditions then */ + int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */ + int timeout; /* timeout = this value * 10us */ +}; + +#endif /* I2C_PCA9564_PLATFORM_H */ diff --git a/include/linux/i2c/tps65010.h b/include/linux/i2c/tps65010.h index 7021635..918c535 100644 --- a/include/linux/i2c/tps65010.h +++ b/include/linux/i2c/tps65010.h @@ -152,5 +152,35 @@ extern int tps65010_config_vregs1(unsigned value); */ extern int tps65013_set_low_pwr(unsigned mode); + +struct i2c_client; + +/** + * struct tps65010_board - packages GPIO and LED lines + * @base: the GPIO number to assign to GPIO-1 + * @outmask: bit (N-1) is set to allow GPIO-N to be used as an + * (open drain) output + * @setup: optional callback issued once the GPIOs are valid + * @teardown: optional callback issued before the GPIOs are invalidated + * @context: optional parameter passed to setup() and teardown() + * + * Board data may be used to package the GPIO (and LED) lines for use + * in by the generic GPIO and LED frameworks. The first four GPIOs + * starting at gpio_base are GPIO1..GPIO4. The next two are LED1/nPG + * and LED2 (with hardware blinking capability, not currently exposed). + * + * The @setup callback may be used with the kind of board-specific glue + * which hands the (now-valid) GPIOs to other drivers, or which puts + * devices in their initial states using these GPIOs. + */ +struct tps65010_board { + int base; + unsigned outmask; + + int (*setup)(struct i2c_client *client, void *context); + int (*teardown)(struct i2c_client *client, void *context); + void *context; +}; + #endif /* __LINUX_I2C_TPS65010_H */ diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 7da5b98..e92170d 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -33,9 +33,9 @@ #include <linux/mempool.h> #include <linux/mutex.h> #include <linux/scatterlist.h> +#include <linux/semaphore.h> /* Needed for MUTEX init macros */ #include <asm/io.h> -#include <asm/semaphore.h> /* Needed for MUTEX init macros */ /* message queue empty */ #define I2O_QUEUE_EMPTY 0xffffffff diff --git a/include/linux/ide.h b/include/linux/ide.h index 6c39482..5f3e82a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -23,7 +23,6 @@ #include <asm/byteorder.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/semaphore.h> #include <asm/mutex.h> #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 40743e0..6fb7f17 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -24,7 +24,6 @@ #include <linux/if_ether.h> #include <linux/if.h> #include <linux/netdevice.h> -#include <asm/semaphore.h> #include <linux/ppp_channel.h> #endif /* __KERNEL__ */ #include <linux/if_pppol2tp.h> diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 1f74e1d..37a6f5b 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -151,6 +151,9 @@ extern struct group_info init_groups; .cpus_allowed = CPU_MASK_ALL, \ .mm = NULL, \ .active_mm = &init_mm, \ + .se = { \ + .group_node = LIST_HEAD_INIT(tsk.se.group_node), \ + }, \ .rt = { \ .run_list = LIST_HEAD_INIT(tsk.rt.run_list), \ .time_slice = HZ, \ diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 605d237..d5d40a9 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -44,7 +44,9 @@ struct resource_list { #define IORESOURCE_CACHEABLE 0x00004000 #define IORESOURCE_RANGELENGTH 0x00008000 #define IORESOURCE_SHADOWABLE 0x00010000 -#define IORESOURCE_BUS_HAS_VGA 0x00080000 + +#define IORESOURCE_SIZEALIGN 0x00020000 /* size indicates alignment */ +#define IORESOURCE_STARTALIGN 0x00040000 /* start field is alignment */ #define IORESOURCE_DISABLED 0x10000000 #define IORESOURCE_UNSET 0x20000000 @@ -110,6 +112,7 @@ extern int allocate_resource(struct resource *root, struct resource *new, void *alignf_data); int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); +resource_size_t resource_alignment(struct resource *res); /* Convenience shorthand with allocation */ #define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name)) diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h index 412e025..e600c4e 100644 --- a/include/linux/irqflags.h +++ b/include/linux/irqflags.h @@ -84,10 +84,10 @@ #define irqs_disabled() \ ({ \ - unsigned long flags; \ + unsigned long _flags; \ \ - raw_local_save_flags(flags); \ - raw_irqs_disabled_flags(flags); \ + raw_local_save_flags(_flags); \ + raw_irqs_disabled_flags(_flags); \ }) #define irqs_disabled_flags(flags) raw_irqs_disabled_flags(flags) diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h new file mode 100644 index 0000000..6092487 --- /dev/null +++ b/include/linux/iscsi_ibft.h @@ -0,0 +1,50 @@ +/* + * Copyright 2007 Red Hat, Inc. + * by Peter Jones <pjones@redhat.com> + * Copyright 2007 IBM, Inc. + * by Konrad Rzeszutek <konradr@linux.vnet.ibm.com> + * Copyright 2008 + * by Konrad Rzeszutek <ketuzsezr@darnok.org> + * + * This code exposes the iSCSI Boot Format Table to userland via sysfs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2.0 as published by + * the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ISCSI_IBFT_H +#define ISCSI_IBFT_H + +struct ibft_table_header { + char signature[4]; + u32 length; + u8 revision; + u8 checksum; + char oem_id[6]; + char oem_table_id[8]; + char reserved[24]; +} __attribute__((__packed__)); + +/* + * Logical location of iSCSI Boot Format Table. + * If the value is NULL there is no iBFT on the machine. + */ +extern struct ibft_table_header *ibft_addr; + +/* + * Routine used to find and reserve the iSCSI Boot Format Table. The + * mapped address is set in the ibft_addr variable. + */ +#ifdef CONFIG_ISCSI_IBFT_FIND +extern void __init reserve_ibft_region(void); +#else +static inline void reserve_ibft_region(void) { } +#endif + +#endif /* ISCSI_IBFT_H */ diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 423f582..07a9b52 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -32,8 +32,6 @@ #include <linux/timer.h> #include <linux/lockdep.h> -#include <asm/semaphore.h> - #define journal_oom_retry 1 /* diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 2cbf6fd..05e2b30 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -30,8 +30,6 @@ #include <linux/bit_spinlock.h> #include <linux/mutex.h> #include <linux/timer.h> - -#include <asm/semaphore.h> #endif #define journal_oom_retry 1 diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index e0b5b68..33ef710 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -36,7 +36,7 @@ #elif HZ >= 6144 && HZ < 12288 # define SHIFT_HZ 13 #else -# error You lose. +# error Invalid value of HZ. #endif /* LATCH is used in the interval timer and ftape setup. */ @@ -135,6 +135,22 @@ static inline u64 get_jiffies_64(void) #define time_before_eq64(a,b) time_after_eq64(b,a) /* + * These four macros compare jiffies and 'a' for convenience. + */ + +/* time_is_before_jiffies(a) return true if a is before jiffies */ +#define time_is_before_jiffies(a) time_after(jiffies, a) + +/* time_is_after_jiffies(a) return true if a is after jiffies */ +#define time_is_after_jiffies(a) time_before(jiffies, a) + +/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/ +#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a) + +/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/ +#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a) + +/* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2df44e7..cd6d02c 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -293,10 +293,8 @@ extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, #define pr_debug(fmt, arg...) \ printk(KERN_DEBUG fmt, ##arg) #else -static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...) -{ - return 0; -} +#define pr_debug(fmt, arg...) \ + ({ if (0) printk(KERN_DEBUG fmt, ##arg); 0; }) #endif /* diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h index 8c4350a..a53e932 100644 --- a/include/linux/kernelcapi.h +++ b/include/linux/kernelcapi.h @@ -48,7 +48,6 @@ typedef struct kcapi_carddef { #include <linux/list.h> #include <linux/skbuff.h> #include <linux/workqueue.h> -#include <asm/semaphore.h> #define KCI_CONTRUP 0 /* arg: struct capi_profile */ #define KCI_CONTRDOWN 1 /* arg: NULL */ diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 2cd7fa7..ce59832 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -327,4 +327,10 @@ extern void ktime_get_ts(struct timespec *ts); /* Get the real (wall-) time in timespec format: */ #define ktime_get_real_ts(ts) getnstimeofday(ts) +static inline ktime_t ns_to_ktime(u64 ns) +{ + static const ktime_t ktime_zero = { .tv64 = 0 }; + return ktime_add_ns(ktime_zero, ns); +} + #endif diff --git a/include/linux/leds.h b/include/linux/leds.h index 0201f6f..b07e3d4 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -59,15 +59,7 @@ struct led_classdev { extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); -extern void __led_classdev_unregister(struct led_classdev *led_cdev, bool sus); -static inline void led_classdev_unregister(struct led_classdev *lcd) -{ - __led_classdev_unregister(lcd, false); -} -static inline void led_classdev_unregister_suspended(struct led_classdev *lcd) -{ - __led_classdev_unregister(lcd, true); -} +extern void led_classdev_unregister(struct led_classdev *lcd); extern void led_classdev_suspend(struct led_classdev *led_cdev); extern void led_classdev_resume(struct led_classdev *led_cdev); diff --git a/include/linux/libata.h b/include/linux/libata.h index 165734a..07ed56f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -443,7 +443,7 @@ enum link_pm { MAX_PERFORMANCE, MEDIUM_POWER, }; -extern struct class_device_attribute class_device_attr_link_power_management_policy; +extern struct device_attribute dev_attr_link_power_management_policy; #ifdef CONFIG_ATA_SFF struct ata_ioports { diff --git a/include/linux/list.h b/include/linux/list.h index 75ce2cb..dac16f9 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -631,31 +631,14 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_rcu(pos, head) \ - for (pos = (head)->next; \ - prefetch(rcu_dereference(pos)->next), pos != (head); \ - pos = pos->next) + for (pos = rcu_dereference((head)->next); \ + prefetch(pos->next), pos != (head); \ + pos = rcu_dereference(pos->next)) #define __list_for_each_rcu(pos, head) \ - for (pos = (head)->next; \ - rcu_dereference(pos) != (head); \ - pos = pos->next) - -/** - * list_for_each_safe_rcu - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - * - * Iterate over an rcu-protected list, safe against removal of list entry. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_safe_rcu(pos, n, head) \ - for (pos = (head)->next; \ - n = rcu_dereference(pos)->next, pos != (head); \ - pos = n) + for (pos = rcu_dereference((head)->next); \ + pos != (head); \ + pos = rcu_dereference(pos->next)) /** * list_for_each_entry_rcu - iterate over rcu list of given type @@ -668,10 +651,9 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_entry_rcu(pos, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member); \ - prefetch(rcu_dereference(pos)->member.next), \ - &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member)) + for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \ + prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member)) /** @@ -686,9 +668,9 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_continue_rcu(pos, head) \ - for ((pos) = (pos)->next; \ - prefetch(rcu_dereference((pos))->next), (pos) != (head); \ - (pos) = (pos)->next) + for ((pos) = rcu_dereference((pos)->next); \ + prefetch((pos)->next), (pos) != (head); \ + (pos) = rcu_dereference((pos)->next)) /* * Double linked lists with a single pointer list head. @@ -986,10 +968,10 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, * as long as the traversal is guarded by rcu_read_lock(). */ #define hlist_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = (head)->first; \ - rcu_dereference(pos) && ({ prefetch(pos->next); 1;}) && \ + for (pos = rcu_dereference((head)->first); \ + pos && ({ prefetch(pos->next); 1;}) && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ - pos = pos->next) + pos = rcu_dereference(pos->next)) #else #warning "don't include kernel headers in userspace" diff --git a/include/linux/lmb.h b/include/linux/lmb.h new file mode 100644 index 0000000..271153d --- /dev/null +++ b/include/linux/lmb.h @@ -0,0 +1,85 @@ +#ifndef _LINUX_LMB_H +#define _LINUX_LMB_H +#ifdef __KERNEL__ + +/* + * Logical memory blocks. + * + * Copyright (C) 2001 Peter Bergner, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/mm.h> + +#define MAX_LMB_REGIONS 128 + +struct lmb_property { + u64 base; + u64 size; +}; + +struct lmb_region { + unsigned long cnt; + u64 size; + struct lmb_property region[MAX_LMB_REGIONS+1]; +}; + +struct lmb { + unsigned long debug; + u64 rmo_size; + struct lmb_region memory; + struct lmb_region reserved; +}; + +extern struct lmb lmb; + +extern void __init lmb_init(void); +extern void __init lmb_analyze(void); +extern long __init lmb_add(u64 base, u64 size); +extern long __init lmb_reserve(u64 base, u64 size); +extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid, + u64 (*nid_range)(u64, u64, int *)); +extern u64 __init lmb_alloc(u64 size, u64 align); +extern u64 __init lmb_alloc_base(u64 size, + u64, u64 max_addr); +extern u64 __init __lmb_alloc_base(u64 size, + u64 align, u64 max_addr); +extern u64 __init lmb_phys_mem_size(void); +extern u64 __init lmb_end_of_DRAM(void); +extern void __init lmb_enforce_memory_limit(u64 memory_limit); +extern int __init lmb_is_reserved(u64 addr); + +extern void lmb_dump_all(void); + +static inline u64 +lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) +{ + return type->region[region_nr].size; +} +static inline u64 +lmb_size_pages(struct lmb_region *type, unsigned long region_nr) +{ + return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT; +} +static inline u64 +lmb_start_pfn(struct lmb_region *type, unsigned long region_nr) +{ + return type->region[region_nr].base >> PAGE_SHIFT; +} +static inline u64 +lmb_end_pfn(struct lmb_region *type, unsigned long region_nr) +{ + return lmb_start_pfn(type, region_nr) + + lmb_size_pages(type, region_nr); +} + +#include <asm/lmb.h> + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_LMB_H */ diff --git a/include/linux/lock_dlm_plock.h b/include/linux/lock_dlm_plock.h deleted file mode 100644 index fc34151..0000000 --- a/include/linux/lock_dlm_plock.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2005 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - */ - -#ifndef __LOCK_DLM_PLOCK_DOT_H__ -#define __LOCK_DLM_PLOCK_DOT_H__ - -#define GDLM_PLOCK_MISC_NAME "lock_dlm_plock" - -#define GDLM_PLOCK_VERSION_MAJOR 1 -#define GDLM_PLOCK_VERSION_MINOR 1 -#define GDLM_PLOCK_VERSION_PATCH 0 - -enum { - GDLM_PLOCK_OP_LOCK = 1, - GDLM_PLOCK_OP_UNLOCK, - GDLM_PLOCK_OP_GET, -}; - -struct gdlm_plock_info { - __u32 version[3]; - __u8 optype; - __u8 ex; - __u8 wait; - __u8 pad; - __u32 pid; - __s32 nodeid; - __s32 rv; - __u32 fsid; - __u64 number; - __u64 start; - __u64 end; - __u64 owner; -}; - -#endif - diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 4babb2a..102d928 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -91,6 +91,7 @@ struct nlm_wait; */ #define NLMCLNT_OHSIZE ((__NEW_UTS_LEN) + 10u) struct nlm_rqst { + atomic_t a_count; unsigned int a_flags; /* initial RPC task flags */ struct nlm_host * a_host; /* host handle */ struct nlm_args a_args; /* arguments */ @@ -173,8 +174,10 @@ void nlmclnt_next_cookie(struct nlm_cookie *); /* * Host cache */ -struct nlm_host *nlmclnt_lookup_host(const struct sockaddr_in *, int, int, - const char *, unsigned int); +struct nlm_host *nlmclnt_lookup_host(const struct sockaddr_in *sin, + int proto, u32 version, + const char *hostname, + unsigned int hostname_len); struct nlm_host *nlmsvc_lookup_host(struct svc_rqst *, const char *, unsigned int); struct rpc_clnt * nlm_bind_host(struct nlm_host *); @@ -191,7 +194,7 @@ void nsm_release(struct nsm_handle *); * This is used in garbage collection and resource reclaim * A return value != 0 means destroy the lock/block/share */ -typedef int (*nlm_host_match_fn_t)(struct nlm_host *cur, struct nlm_host *ref); +typedef int (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref); /* * Server-side lock handling @@ -217,8 +220,13 @@ void nlmsvc_mark_resources(void); void nlmsvc_free_host_resources(struct nlm_host *); void nlmsvc_invalidate_all(void); -static __inline__ struct inode * -nlmsvc_file_inode(struct nlm_file *file) +/* + * Cluster failover support + */ +int nlmsvc_unlock_all_by_sb(struct super_block *sb); +int nlmsvc_unlock_all_by_ip(__be32 server_addr); + +static inline struct inode *nlmsvc_file_inode(struct nlm_file *file) { return file->f_file->f_path.dentry->d_inode; } @@ -226,8 +234,8 @@ nlmsvc_file_inode(struct nlm_file *file) /* * Compare two host addresses (needs modifying for ipv6) */ -static __inline__ int -nlm_cmp_addr(const struct sockaddr_in *sin1, const struct sockaddr_in *sin2) +static inline int nlm_cmp_addr(const struct sockaddr_in *sin1, + const struct sockaddr_in *sin2) { return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; } @@ -236,8 +244,8 @@ nlm_cmp_addr(const struct sockaddr_in *sin1, const struct sockaddr_in *sin2) * Compare two NLM locks. * When the second lock is of type F_UNLCK, this acts like a wildcard. */ -static __inline__ int -nlm_compare_locks(const struct file_lock *fl1, const struct file_lock *fl2) +static inline int nlm_compare_locks(const struct file_lock *fl1, + const struct file_lock *fl2) { return fl1->fl_pid == fl2->fl_pid && fl1->fl_owner == fl2->fl_owner diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h index 22a6458..5a5448b 100644 --- a/include/linux/lockd/sm_inter.h +++ b/include/linux/lockd/sm_inter.h @@ -19,6 +19,7 @@ #define SM_NOTIFY 6 #define SM_MAXSTRLEN 1024 +#define SM_PRIV_SIZE 16 /* * Arguments for all calls to statd diff --git a/include/linux/mbus.h b/include/linux/mbus.h new file mode 100644 index 0000000..c11ff29 --- /dev/null +++ b/include/linux/mbus.h @@ -0,0 +1,36 @@ +/* + * Marvell MBUS common definitions. + * + * Copyright (C) 2008 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LINUX_MBUS_H +#define __LINUX_MBUS_H + +struct mbus_dram_target_info +{ + /* + * The 4-bit MBUS target ID of the DRAM controller. + */ + u8 mbus_dram_target_id; + + /* + * The base address, size, and MBUS attribute ID for each + * of the possible DRAM chip selects. Peripherals are + * required to support at least 4 decode windows. + */ + int num_cs; + struct mbus_dram_window { + u8 cs_index; + u8 mbus_attr; + u32 base; + u32 size; + } cs[4]; +}; + + +#endif diff --git a/include/linux/memory.h b/include/linux/memory.h index 33f0ff0..f80e0e3 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -18,8 +18,7 @@ #include <linux/sysdev.h> #include <linux/node.h> #include <linux/compiler.h> - -#include <asm/semaphore.h> +#include <linux/mutex.h> struct memory_block { unsigned long phys_index; @@ -30,7 +29,7 @@ struct memory_block { * created long after the critical areas during * initialization. */ - struct semaphore state_sem; + struct mutex state_mutex; int phys_device; /* to which fru does this belong? */ void *hw; /* optional pointer to fw/hw data */ int (*phys_callback)(struct memory_block *); diff --git a/include/linux/memstick.h b/include/linux/memstick.h index 3e686ec..37a5cdb 100644 --- a/include/linux/memstick.h +++ b/include/linux/memstick.h @@ -276,7 +276,7 @@ struct memstick_host { #define MEMSTICK_CAP_PAR8 4 struct work_struct media_checker; - struct class_device cdev; + struct device dev; struct memstick_dev *card; unsigned int retries; diff --git a/include/linux/meye.h b/include/linux/meye.h index 39fd9c8..12010ac 100644 --- a/include/linux/meye.h +++ b/include/linux/meye.h @@ -58,7 +58,7 @@ struct meye_params { /* V4L2 private controls */ #define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) +#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) #define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) #define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) #define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) diff --git a/include/linux/mfd/htc-egpio.h b/include/linux/mfd/htc-egpio.h new file mode 100644 index 0000000..b4201c9 --- /dev/null +++ b/include/linux/mfd/htc-egpio.h @@ -0,0 +1,57 @@ +/* + * HTC simple EGPIO irq and gpio extender + */ + +#ifndef __HTC_EGPIO_H__ +#define __HTC_EGPIO_H__ + +#include <linux/gpio.h> + +/* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */ +#define HTC_EGPIO_OUTPUT (~0) +#define HTC_EGPIO_INPUT 0 + +/** + * struct htc_egpio_chip - descriptor to create gpio_chip for register range + * @reg_start: index of first register + * @gpio_base: gpio number of first pin in this register range + * @num_gpios: number of gpios in this register range, max BITS_PER_LONG + * (number of registers = DIV_ROUND_UP(num_gpios, reg_width)) + * @direction: bitfield, '0' = input, '1' = output, + */ +struct htc_egpio_chip { + int reg_start; + int gpio_base; + int num_gpios; + unsigned long direction; + unsigned long initial_values; +}; + +/** + * struct htc_egpio_platform_data - description provided by the arch + * @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START) + * @num_irqs: number of irqs + * @reg_width: number of bits per register, either 8 or 16 bit + * @bus_width: alignment of the registers, either 16 or 32 bit + * @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1' + * @ack_register: location of the irq/ack register + * @chip: pointer to array of htc_egpio_chip descriptors + * @num_chips: number of egpio chip descriptors + */ +struct htc_egpio_platform_data { + int bus_width; + int reg_width; + + int irq_base; + int num_irqs; + int invert_acks; + int ack_register; + + struct htc_egpio_chip *chip; + int num_chips; +}; + +/* Determine the wakeup irq, to be called during early resume */ +extern int htc_egpio_get_wakeup_irq(struct device *dev); + +#endif diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h new file mode 100644 index 0000000..b4294f1 --- /dev/null +++ b/include/linux/mfd/htc-pasic3.h @@ -0,0 +1,55 @@ +/* + * HTC PASIC3 driver - LEDs and DS1WM + * + * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ + +#ifndef __PASIC3_H +#define __PASIC3_H + +#include <linux/platform_device.h> +#include <linux/leds.h> + +extern void pasic3_write_register(struct device *dev, u32 reg, u8 val); +extern u8 pasic3_read_register(struct device *dev, u32 reg); + +/* + * mask for registers 0x20,0x21,0x22 + */ +#define PASIC3_MASK_LED0 0x04 +#define PASIC3_MASK_LED1 0x08 +#define PASIC3_MASK_LED2 0x40 + +/* + * bits in register 0x06 + */ +#define PASIC3_BIT2_LED0 0x08 +#define PASIC3_BIT2_LED1 0x10 +#define PASIC3_BIT2_LED2 0x20 + +struct pasic3_led { + struct led_classdev led; + unsigned int hw_num; + unsigned int bit2; + unsigned int mask; + struct pasic3_leds_machinfo *pdata; +}; + +struct pasic3_leds_machinfo { + unsigned int num_leds; + unsigned int power_gpio; + struct pasic3_led *leds; +}; + +struct pasic3_platform_data { + struct pasic3_leds_machinfo *led_pdata; + unsigned int bus_shift; + unsigned int clock_rate; +}; + +#endif diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 24b30b9..26433ec 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -43,15 +43,7 @@ struct miscdevice { }; extern int misc_register(struct miscdevice * misc); -extern int __misc_deregister(struct miscdevice *misc, bool suspended); -static inline int misc_deregister(struct miscdevice *misc) -{ - return __misc_deregister(misc, false); -} -static inline int misc_deregister_suspended(struct miscdevice *misc) -{ - return __misc_deregister(misc, true); -} +extern int misc_deregister(struct miscdevice *misc); #define MODULE_ALIAS_MISCDEV(minor) \ MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR) \ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 8d8d197..9f274a6 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -699,7 +699,6 @@ extern char numa_zonelist_order[]; extern struct pglist_data contig_page_data; #define NODE_DATA(nid) (&contig_page_data) #define NODE_MEM_MAP(nid) mem_map -#define MAX_NODES_SHIFT 1 #else /* CONFIG_NEED_MULTIPLE_NODES */ diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h index 8eed44f..830bbcd 100644 --- a/include/linux/mnt_namespace.h +++ b/include/linux/mnt_namespace.h @@ -5,6 +5,7 @@ #include <linux/mount.h> #include <linux/sched.h> #include <linux/nsproxy.h> +#include <linux/seq_file.h> struct mnt_namespace { atomic_t count; @@ -14,6 +15,13 @@ struct mnt_namespace { int event; }; +struct proc_mounts { + struct seq_file m; /* must be the first element */ + struct mnt_namespace *ns; + struct path root; + int event; +}; + extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *, struct fs_struct *); extern void __put_mnt_ns(struct mnt_namespace *ns); @@ -37,5 +45,9 @@ static inline void get_mnt_ns(struct mnt_namespace *ns) atomic_inc(&ns->count); } +extern const struct seq_operations mounts_op; +extern const struct seq_operations mountinfo_op; +extern const struct seq_operations mountstats_op; + #endif #endif diff --git a/include/linux/mount.h b/include/linux/mount.h index 5ee2df2..b4836d5 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/list.h> +#include <linux/nodemask.h> #include <linux/spinlock.h> #include <asm/atomic.h> @@ -28,8 +29,10 @@ struct mnt_namespace; #define MNT_NOATIME 0x08 #define MNT_NODIRATIME 0x10 #define MNT_RELATIME 0x20 +#define MNT_READONLY 0x40 /* does the user want this to be r/o? */ #define MNT_SHRINKABLE 0x100 +#define MNT_IMBALANCED_WRITE_COUNT 0x200 /* just for debugging */ #define MNT_SHARED 0x1000 /* if the vfsmount is a shared mount */ #define MNT_UNBINDABLE 0x2000 /* if the vfsmount is a unbindable mount */ @@ -53,6 +56,8 @@ struct vfsmount { struct list_head mnt_slave; /* slave list entry */ struct vfsmount *mnt_master; /* slave is on master->mnt_slave_list */ struct mnt_namespace *mnt_ns; /* containing namespace */ + int mnt_id; /* mount identifier */ + int mnt_group_id; /* peer group identifier */ /* * We put mnt_count & mnt_expiry_mark at the end of struct vfsmount * to let these frequently modified fields in a separate cache line @@ -62,6 +67,11 @@ struct vfsmount { int mnt_expiry_mark; /* true if marked for expiry */ int mnt_pinned; int mnt_ghosts; + /* + * This value is not stable unless all of the mnt_writers[] spinlocks + * are held, and all mnt_writer[]s on this mount have 0 as their ->count + */ + atomic_t __mnt_writers; }; static inline struct vfsmount *mntget(struct vfsmount *mnt) @@ -71,9 +81,12 @@ static inline struct vfsmount *mntget(struct vfsmount *mnt) return mnt; } +extern int mnt_want_write(struct vfsmount *mnt); +extern void mnt_drop_write(struct vfsmount *mnt); extern void mntput_no_expire(struct vfsmount *mnt); extern void mnt_pin(struct vfsmount *mnt); extern void mnt_unpin(struct vfsmount *mnt); +extern int __mnt_is_readonly(struct vfsmount *mnt); static inline void mntput(struct vfsmount *mnt) { @@ -83,8 +96,6 @@ static inline void mntput(struct vfsmount *mnt) } } -extern void free_vfsmnt(struct vfsmount *mnt); -extern struct vfsmount *alloc_vfsmnt(const char *name); extern struct vfsmount *do_kern_mount(const char *fstype, int flags, const char *name, void *data); diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h index 6977780..85fd041 100644 --- a/include/linux/mtd/inftl.h +++ b/include/linux/mtd/inftl.h @@ -57,6 +57,11 @@ extern char inftlmountrev[]; void INFTL_dumptables(struct INFTLrecord *s); void INFTL_dumpVUchains(struct INFTLrecord *s); +int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #endif /* __KERNEL__ */ #endif /* __MTD_INFTL_H__ */ diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h index bcf2fb3f..001eec5 100644 --- a/include/linux/mtd/nftl.h +++ b/include/linux/mtd/nftl.h @@ -43,6 +43,11 @@ struct NFTLrecord { int NFTL_mount(struct NFTLrecord *s); int NFTL_formatblock(struct NFTLrecord *s, int block); +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + #ifndef NFTL_MAJOR #define NFTL_MAJOR 93 #endif diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index fd0a260..9aa2a91 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -187,4 +187,7 @@ struct onenand_manufacturers { char *name; }; +int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops); + #endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h index 9667863..0e37ad0 100644 --- a/include/linux/mtd/plat-ram.h +++ b/include/linux/mtd/plat-ram.h @@ -21,8 +21,9 @@ #define PLATRAM_RW (1) struct platdata_mtd_ram { - char *mapname; - char **probes; + const char *mapname; + const char **map_probes; + const char **probes; struct mtd_partition *partitions; int nr_partitions; int bankwidth; diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h index 7f11fa5..539f3b5 100644 --- a/include/linux/nfs3.h +++ b/include/linux/nfs3.h @@ -96,7 +96,7 @@ struct nfs3_fh { #define MOUNTPROC3_UMNTALL 4 -#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES) +#if defined(__KERNEL__) /* Number of 32bit words in post_op_attr */ #define NFS3_POST_OP_ATTR_WORDS 22 diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index f4a0e4c..27d6a8d 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -430,7 +430,6 @@ extern void nfs_unregister_sysctl(void); /* * linux/fs/nfs/namespace.c */ -extern struct list_head nfs_automount_list; extern const struct inode_operations nfs_mountpoint_inode_operations; extern const struct inode_operations nfs_referral_inode_operations; extern int nfs_mountpoint_expiry_timeout; @@ -466,9 +465,9 @@ extern int nfs_wb_page(struct inode *inode, struct page* page); extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) extern int nfs_commit_inode(struct inode *, int); -extern struct nfs_write_data *nfs_commit_alloc(void); +extern struct nfs_write_data *nfs_commitdata_alloc(void); extern void nfs_commit_free(struct nfs_write_data *wdata); -extern void nfs_commit_release(void *wdata); +extern void nfs_commitdata_release(void *wdata); #else static inline int nfs_commit_inode(struct inode *inode, int how) diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 3423c67..c9beacd 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -32,6 +32,8 @@ struct nfs_client { const struct nfs_rpc_ops *rpc_ops; /* NFS protocol vector */ int cl_proto; /* Network transport protocol */ + struct rpc_cred *cl_machine_cred; + #ifdef CONFIG_NFS_V4 u64 cl_clientid; /* constant */ nfs4_verifier cl_confirm; @@ -93,6 +95,7 @@ struct nfs_server { unsigned int wpages; /* write size (in pages) */ unsigned int wtmult; /* server disk block size */ unsigned int dtsize; /* readdir size */ + unsigned short port; /* "port=" setting */ unsigned int bsize; /* server block size */ unsigned int acregmin; /* attr cache timeouts */ unsigned int acregmax; @@ -117,6 +120,13 @@ struct nfs_server { atomic_t active; /* Keep trace of any activity to this server */ wait_queue_head_t active_wq; /* Wait for any activity to stop */ + + /* mountd-related mount options */ + struct sockaddr_storage mountd_address; + size_t mountd_addrlen; + u32 mountd_version; + unsigned short mountd_port; + unsigned short mountd_protocol; }; /* Server capabilities */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index f301d0b..24263bb 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -140,6 +140,7 @@ struct nfs_openres { __u32 rflags; struct nfs_fattr * f_attr; struct nfs_fattr * dir_attr; + struct nfs_seqid * seqid; const struct nfs_server *server; int delegation_type; nfs4_stateid delegation; @@ -159,6 +160,7 @@ struct nfs_open_confirmargs { struct nfs_open_confirmres { nfs4_stateid stateid; + struct nfs_seqid * seqid; }; /* @@ -175,6 +177,7 @@ struct nfs_closeargs { struct nfs_closeres { nfs4_stateid stateid; struct nfs_fattr * fattr; + struct nfs_seqid * seqid; const struct nfs_server *server; }; /* @@ -199,7 +202,9 @@ struct nfs_lock_args { }; struct nfs_lock_res { - nfs4_stateid stateid; + nfs4_stateid stateid; + struct nfs_seqid * lock_seqid; + struct nfs_seqid * open_seqid; }; struct nfs_locku_args { @@ -210,7 +215,8 @@ struct nfs_locku_args { }; struct nfs_locku_res { - nfs4_stateid stateid; + nfs4_stateid stateid; + struct nfs_seqid * seqid; }; struct nfs_lockt_args { diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild index e726fc3..fc97204 100644 --- a/include/linux/nfsd/Kbuild +++ b/include/linux/nfsd/Kbuild @@ -1,6 +1,6 @@ unifdef-y += const.h +unifdef-y += debug.h unifdef-y += export.h +unifdef-y += nfsfh.h unifdef-y += stats.h unifdef-y += syscall.h -unifdef-y += nfsfh.h -unifdef-y += debug.h diff --git a/include/linux/nfsd/cache.h b/include/linux/nfsd/cache.h index 7b5d784..04b355c 100644 --- a/include/linux/nfsd/cache.h +++ b/include/linux/nfsd/cache.h @@ -10,7 +10,6 @@ #ifndef NFSCACHE_H #define NFSCACHE_H -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/uio.h> @@ -77,5 +76,4 @@ void nfsd_reply_cache_shutdown(void); int nfsd_cache_lookup(struct svc_rqst *, int); void nfsd_cache_update(struct svc_rqst *, int, __be32 *); -#endif /* __KERNEL__ */ #endif /* NFSCACHE_H */ diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 8caf4c4..41d30c9 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -27,7 +27,6 @@ #define NFSD_VERSION "0.5" #define NFSD_SUPPORTED_MINOR_VERSION 0 -#ifdef __KERNEL__ /* * Special flags for nfsd_permission. These must be different from MAY_READ, * MAY_WRITE, and MAY_EXEC. @@ -56,12 +55,20 @@ extern struct svc_program nfsd_program; extern struct svc_version nfsd_version2, nfsd_version3, nfsd_version4; extern struct svc_serv *nfsd_serv; + +extern struct seq_operations nfs_exports_op; + /* * Function prototypes. */ int nfsd_svc(unsigned short port, int nrservs); int nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp); +int nfsd_nrthreads(void); +int nfsd_nrpools(void); +int nfsd_get_nrthreads(int n, int *); +int nfsd_set_nrthreads(int n, int *); + /* nfsd/vfs.c */ int fh_lock_parent(struct svc_fh *, struct dentry *); int nfsd_racache_init(int); @@ -322,10 +329,8 @@ extern struct timeval nfssvc_boot; (FATTR4_WORD0_SIZE | FATTR4_WORD0_ACL ) #define NFSD_WRITEABLE_ATTRS_WORD1 \ (FATTR4_WORD1_MODE | FATTR4_WORD1_OWNER | FATTR4_WORD1_OWNER_GROUP \ - | FATTR4_WORD1_TIME_ACCESS_SET | FATTR4_WORD1_TIME_METADATA | FATTR4_WORD1_TIME_MODIFY_SET) + | FATTR4_WORD1_TIME_ACCESS_SET | FATTR4_WORD1_TIME_MODIFY_SET) #endif /* CONFIG_NFSD_V4 */ -#endif /* __KERNEL__ */ - #endif /* LINUX_NFSD_NFSD_H */ diff --git a/include/linux/of.h b/include/linux/of.h index 6981016..59a61bd 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -62,6 +62,7 @@ extern struct property *of_find_property(const struct device_node *np, int *lenp); extern int of_device_is_compatible(const struct device_node *device, const char *); +extern int of_device_is_available(const struct device_node *device); extern const void *of_get_property(const struct device_node *node, const char *name, int *lenp); diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h new file mode 100644 index 0000000..2ee97e9 --- /dev/null +++ b/include/linux/of_gpio.h @@ -0,0 +1,69 @@ +/* + * OF helpers for the GPIO API + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_OF_GPIO_H +#define __LINUX_OF_GPIO_H + +#include <linux/errno.h> +#include <asm/gpio.h> + +#ifdef CONFIG_OF_GPIO + +/* + * Generic OF GPIO chip + */ +struct of_gpio_chip { + struct gpio_chip gc; + int gpio_cells; + int (*xlate)(struct of_gpio_chip *of_gc, struct device_node *np, + const void *gpio_spec); +}; + +static inline struct of_gpio_chip *to_of_gpio_chip(struct gpio_chip *gc) +{ + return container_of(gc, struct of_gpio_chip, gc); +} + +/* + * OF GPIO chip for memory mapped banks + */ +struct of_mm_gpio_chip { + struct of_gpio_chip of_gc; + void (*save_regs)(struct of_mm_gpio_chip *mm_gc); + void __iomem *regs; +}; + +static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc) +{ + struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); + + return container_of(of_gc, struct of_mm_gpio_chip, of_gc); +} + +extern int of_get_gpio(struct device_node *np, int index); +extern int of_mm_gpiochip_add(struct device_node *np, + struct of_mm_gpio_chip *mm_gc); +extern int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, + struct device_node *np, + const void *gpio_spec); +#else + +/* Drivers may not strictly depend on the GPIO support, so let them link. */ +static inline int of_get_gpio(struct device_node *np, int index) +{ + return -ENOSYS; +} + +#endif /* CONFIG_OF_GPIO */ + +#endif /* __LINUX_OF_GPIO_H */ diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h new file mode 100644 index 0000000..2e5a967 --- /dev/null +++ b/include/linux/of_i2c.h @@ -0,0 +1,24 @@ +/* + * Generic I2C API implementation for PowerPC. + * + * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_OF_I2C_H +#define __LINUX_OF_I2C_H + +#include <linux/i2c.h> + +#ifdef CONFIG_OF_I2C + +void of_register_i2c_devices(struct i2c_adapter *adap, + struct device_node *adap_node); + +#endif /* CONFIG_OF_I2C */ + +#endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/parport.h b/include/linux/parport.h index d1ad546..dcb9e01 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -101,9 +101,9 @@ typedef enum { #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/irqreturn.h> +#include <linux/semaphore.h> #include <asm/system.h> #include <asm/ptrace.h> -#include <asm/semaphore.h> /* Define this later. */ struct parport; diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h new file mode 100644 index 0000000..a1a1e61 --- /dev/null +++ b/include/linux/pci-aspm.h @@ -0,0 +1,56 @@ +/* + * aspm.h + * + * PCI Express ASPM defines and function prototypes + * + * Copyright (C) 2007 Intel Corp. + * Zhang Yanmin (yanmin.zhang@intel.com) + * Shaohua Li (shaohua.li@intel.com) + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI Express Specification + */ + +#ifndef LINUX_ASPM_H +#define LINUX_ASPM_H + +#include <linux/pci.h> + +#define PCIE_LINK_STATE_L0S 1 +#define PCIE_LINK_STATE_L1 2 +#define PCIE_LINK_STATE_CLKPM 4 + +#ifdef CONFIG_PCIEASPM +extern void pcie_aspm_init_link_state(struct pci_dev *pdev); +extern void pcie_aspm_exit_link_state(struct pci_dev *pdev); +extern void pcie_aspm_pm_state_change(struct pci_dev *pdev); +extern void pci_disable_link_state(struct pci_dev *pdev, int state); +#else +static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) +{ +} +static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) +{ +} +static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) +{ +} +static inline void pci_disable_link_state(struct pci_dev *pdev, int state) +{ +} +#endif + +#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */ +extern void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev); +extern void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev); +#else +static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) +{ +} +static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) +{ +} +#endif +#endif /* LINUX_ASPM_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index ea760e5..2924913 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -20,6 +20,8 @@ /* Include the pci register defines */ #include <linux/pci_regs.h> +struct pci_vpd; + /* * The PCI interface treats multi-function devices as independent * devices. The slot/function address of each device is encoded @@ -128,11 +130,11 @@ struct pci_cap_saved_state { u32 data[0]; }; +struct pcie_link_state; /* * The pci_dev structure is used to describe PCI devices. */ struct pci_dev { - struct list_head global_list; /* node in list of all PCI devices */ struct list_head bus_list; /* node in per-bus list */ struct pci_bus *bus; /* bus this device is on */ struct pci_bus *subordinate; /* bus this device bridges to */ @@ -165,6 +167,10 @@ struct pci_dev { this is D0-D3, D0 being fully functional, and D3 being off. */ +#ifdef CONFIG_PCIEASPM + struct pcie_link_state *link_state; /* ASPM link state. */ +#endif + pci_channel_state_t error_state; /* current connectivity state */ struct device dev; /* Generic device interface */ @@ -181,6 +187,7 @@ struct pci_dev { unsigned int transparent:1; /* Transparent PCI bridge */ unsigned int multifunction:1;/* Part of multi-function device */ /* keep track of device state */ + unsigned int is_added:1; unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ unsigned int no_d1d2:1; /* only allow d0 or d3 */ @@ -201,11 +208,11 @@ struct pci_dev { #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif + struct pci_vpd *vpd; }; extern struct pci_dev *alloc_pci_dev(void); -#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list) #define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) #define to_pci_dev(n) container_of(n, struct pci_dev, dev) #define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) @@ -449,7 +456,6 @@ extern struct bus_type pci_bus_type; /* Do NOT directly access these two variables, unless you are arch specific pci * code, or pci core code. */ extern struct list_head pci_root_buses; /* list of all known PCI buses */ -extern struct list_head pci_devices; /* list of all devices */ /* Some device drivers need know if pci is initiated */ extern int no_pci_devices(void); @@ -517,17 +523,13 @@ struct pci_bus *pci_find_next_bus(const struct pci_bus *from); struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from); -struct pci_dev *pci_get_device_reverse(unsigned int vendor, unsigned int device, - struct pci_dev *from); - struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - struct pci_dev *from); + const struct pci_dev *from); struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn); struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn); struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from); int pci_dev_present(const struct pci_device_id *ids); -const struct pci_device_id *pci_find_present(const struct pci_device_id *ids); int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 *val); @@ -601,7 +603,6 @@ int pcie_get_readrq(struct pci_dev *dev); int pcie_set_readrq(struct pci_dev *dev, int rq); void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); -int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i); int pci_select_bars(struct pci_dev *dev, unsigned long flags); /* ROM control related routines */ @@ -626,6 +627,7 @@ int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pdev_enable_device(struct pci_dev *); void pdev_sort_resources(struct pci_dev *, struct resource_list *); +int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), int (*)(struct pci_dev *, u8, u8)); #define HAVE_PCI_REQ_REGIONS 2 @@ -793,18 +795,11 @@ static inline struct pci_dev *pci_get_device(unsigned int vendor, return NULL; } -static inline struct pci_dev *pci_get_device_reverse(unsigned int vendor, - unsigned int device, - struct pci_dev *from) -{ - return NULL; -} - static inline struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - struct pci_dev *from) + const struct pci_dev *from) { return NULL; } @@ -817,7 +812,6 @@ static inline struct pci_dev *pci_get_class(unsigned int class, #define pci_dev_present(ids) (0) #define no_pci_devices() (1) -#define pci_find_present(ids) (NULL) #define pci_dev_put(dev) do { } while (0) static inline void pci_set_master(struct pci_dev *dev) diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index c1914a8..c0c1223 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -395,9 +395,17 @@ #define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP_ASPMS 0xc00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_L0SEL 0x7000 /* L0s Exit Latency */ +#define PCI_EXP_LNKCAP_L1EL 0x38000 /* L1 Exit Latency */ +#define PCI_EXP_LNKCAP_CLKPM 0x40000 /* L1 Clock Power Management */ #define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL_RL 0x20 /* Retrain Link */ +#define PCI_EXP_LNKCTL_CCC 0x40 /* Common Clock COnfiguration */ #define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ #define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA_LT 0x800 /* Link Training */ +#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCTL 24 /* Slot Control */ #define PCI_EXP_SLTSTA 26 /* Slot Status */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 015b735..1de72cb 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -183,8 +183,9 @@ typedef struct pm_message { struct dev_pm_info { pm_message_t power_state; unsigned can_wakeup:1; -#ifdef CONFIG_PM_SLEEP unsigned should_wakeup:1; + bool sleeping:1; /* Owned by the PM core */ +#ifdef CONFIG_PM_SLEEP struct list_head entry; #endif }; @@ -197,11 +198,6 @@ extern void device_resume(void); extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); -#define device_set_wakeup_enable(dev,val) \ - ((dev)->power.should_wakeup = !!(val)) -#define device_may_wakeup(dev) \ - (device_can_wakeup(dev) && (dev)->power.should_wakeup) - extern void __suspend_report_result(const char *function, void *fn, int ret); #define suspend_report_result(fn, ret) \ @@ -209,20 +205,6 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); __suspend_report_result(__FUNCTION__, fn, ret); \ } while (0) -/* - * Platform hook to activate device wakeup capability, if that's not already - * handled by enable_irq_wake() etc. - * Returns zero on success, else negative errno - */ -extern int (*platform_enable_wakeup)(struct device *dev, int is_on); - -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - if (platform_enable_wakeup) - return (*platform_enable_wakeup)(dev, is_on); - return 0; -} - #else /* !CONFIG_PM_SLEEP */ static inline int device_suspend(pm_message_t state) @@ -230,29 +212,10 @@ static inline int device_suspend(pm_message_t state) return 0; } -#define device_set_wakeup_enable(dev,val) do{}while(0) -#define device_may_wakeup(dev) (0) - -#define suspend_report_result(fn, ret) do { } while (0) - -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - return 0; -} +#define suspend_report_result(fn, ret) do {} while (0) #endif /* !CONFIG_PM_SLEEP */ -/* changes to device_may_wakeup take effect on the next pm state change. - * by default, devices should wakeup if they can. - */ -#define device_can_wakeup(dev) \ - ((dev)->power.can_wakeup) -#define device_init_wakeup(dev,val) \ - do { \ - device_can_wakeup(dev) = !!(val); \ - device_set_wakeup_enable(dev,val); \ - } while(0) - /* * Global Power Management flags * Used to keep APM and ACPI from both being active diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h new file mode 100644 index 0000000..f0d0b2c --- /dev/null +++ b/include/linux/pm_wakeup.h @@ -0,0 +1,90 @@ +/* + * pm_wakeup.h - Power management wakeup interface + * + * Copyright (C) 2008 Alan Stern + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _LINUX_PM_WAKEUP_H +#define _LINUX_PM_WAKEUP_H + +#ifndef _DEVICE_H_ +# error "please don't include this file directly" +#endif + +#ifdef CONFIG_PM + +/* changes to device_may_wakeup take effect on the next pm state change. + * by default, devices should wakeup if they can. + */ +static inline void device_init_wakeup(struct device *dev, int val) +{ + dev->power.can_wakeup = dev->power.should_wakeup = !!val; +} + +static inline int device_can_wakeup(struct device *dev) +{ + return dev->power.can_wakeup; +} + +static inline void device_set_wakeup_enable(struct device *dev, int val) +{ + dev->power.should_wakeup = !!val; +} + +static inline int device_may_wakeup(struct device *dev) +{ + return dev->power.can_wakeup & dev->power.should_wakeup; +} + +/* + * Platform hook to activate device wakeup capability, if that's not already + * handled by enable_irq_wake() etc. + * Returns zero on success, else negative errno + */ +extern int (*platform_enable_wakeup)(struct device *dev, int is_on); + +static inline int call_platform_enable_wakeup(struct device *dev, int is_on) +{ + if (platform_enable_wakeup) + return (*platform_enable_wakeup)(dev, is_on); + return 0; +} + +#else /* !CONFIG_PM */ + +/* For some reason the next two routines work even without CONFIG_PM */ +static inline void device_init_wakeup(struct device *dev, int val) +{ + dev->power.can_wakeup = !!val; +} + +static inline int device_can_wakeup(struct device *dev) +{ + return dev->power.can_wakeup; +} + +#define device_set_wakeup_enable(dev, val) do {} while (0) +#define device_may_wakeup(dev) 0 + +static inline int call_platform_enable_wakeup(struct device *dev, int is_on) +{ + return 0; +} + +#endif /* !CONFIG_PM */ + +#endif /* _LINUX_PM_WAKEUP_H */ diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 3800639..5c80b19 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -67,4 +67,10 @@ #define PR_CAPBSET_READ 23 #define PR_CAPBSET_DROP 24 +/* Get/set the process' ability to use the timestamp counter instruction */ +#define PR_GET_TSC 25 +#define PR_SET_TSC 26 +# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */ +# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */ + #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index fbaeda7..8ab630b 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -19,7 +19,6 @@ #define _MD_H #include <linux/blkdev.h> -#include <asm/semaphore.h> #include <linux/major.h> #include <linux/ioctl.h> #include <linux/types.h> diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h index d22ad39..6b537f1 100644 --- a/include/linux/raid_class.h +++ b/include/linux/raid_class.h @@ -53,20 +53,20 @@ struct raid_data { #define DEFINE_RAID_ATTRIBUTE(type, attr) \ static inline void \ raid_set_##attr(struct raid_template *r, struct device *dev, type value) { \ - struct class_device *cdev = \ + struct device *device = \ attribute_container_find_class_device(&r->raid_attrs.ac, dev);\ struct raid_data *rd; \ - BUG_ON(!cdev); \ - rd = class_get_devdata(cdev); \ + BUG_ON(!device); \ + rd = dev_get_drvdata(device); \ rd->attr = value; \ } \ static inline type \ raid_get_##attr(struct raid_template *r, struct device *dev) { \ - struct class_device *cdev = \ + struct device *device = \ attribute_container_find_class_device(&r->raid_attrs.ac, dev);\ struct raid_data *rd; \ - BUG_ON(!cdev); \ - rd = class_get_devdata(cdev); \ + BUG_ON(!device); \ + rd = dev_get_drvdata(device); \ return rd->attr; \ } diff --git a/include/linux/sched.h b/include/linux/sched.h index 6a1e7af..311380e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -61,7 +61,6 @@ struct sched_param { #include <linux/mm_types.h> #include <asm/system.h> -#include <asm/semaphore.h> #include <asm/page.h> #include <asm/ptrace.h> #include <asm/cputime.h> @@ -704,6 +703,7 @@ enum cpu_idle_type { #define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */ #define SD_SERIALIZE 1024 /* Only a single load balancing instance */ +#define SD_WAKE_IDLE_FAR 2048 /* Gain latency sacrificing cache hit */ #define BALANCE_FOR_MC_POWER \ (sched_smt_power_savings ? SD_POWERSAVINGS_BALANCE : 0) @@ -733,12 +733,31 @@ struct sched_group { u32 reciprocal_cpu_power; }; +enum sched_domain_level { + SD_LV_NONE = 0, + SD_LV_SIBLING, + SD_LV_MC, + SD_LV_CPU, + SD_LV_NODE, + SD_LV_ALLNODES, + SD_LV_MAX +}; + +struct sched_domain_attr { + int relax_domain_level; +}; + +#define SD_ATTR_INIT (struct sched_domain_attr) { \ + .relax_domain_level = -1, \ +} + struct sched_domain { /* These fields must be setup */ struct sched_domain *parent; /* top domain must be null terminated */ struct sched_domain *child; /* bottom domain must be null terminated */ struct sched_group *groups; /* the balancing groups of the domain */ cpumask_t span; /* span of all CPUs in this domain */ + int first_cpu; /* cache of the first cpu in this domain */ unsigned long min_interval; /* Minimum balance interval ms */ unsigned long max_interval; /* Maximum balance interval ms */ unsigned int busy_factor; /* less balancing by factor if busy */ @@ -750,6 +769,7 @@ struct sched_domain { unsigned int wake_idx; unsigned int forkexec_idx; int flags; /* See SD_* */ + enum sched_domain_level level; /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ @@ -789,7 +809,8 @@ struct sched_domain { #endif }; -extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new); +extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new, + struct sched_domain_attr *dattr_new); extern int arch_reinit_sched_domains(void); #endif /* CONFIG_SMP */ @@ -889,7 +910,8 @@ struct sched_class { void (*set_curr_task) (struct rq *rq); void (*task_tick) (struct rq *rq, struct task_struct *p, int queued); void (*task_new) (struct rq *rq, struct task_struct *p); - void (*set_cpus_allowed)(struct task_struct *p, cpumask_t *newmask); + void (*set_cpus_allowed)(struct task_struct *p, + const cpumask_t *newmask); void (*join_domain)(struct rq *rq); void (*leave_domain)(struct rq *rq); @@ -923,6 +945,7 @@ struct load_weight { struct sched_entity { struct load_weight load; /* for load-balancing */ struct rb_node run_node; + struct list_head group_node; unsigned int on_rq; u64 exec_start; @@ -982,6 +1005,7 @@ struct sched_rt_entity { unsigned long timeout; int nr_cpus_allowed; + struct sched_rt_entity *back; #ifdef CONFIG_RT_GROUP_SCHED struct sched_rt_entity *parent; /* rq on which this entity is (to be) queued: */ @@ -1502,15 +1526,21 @@ static inline void put_task_struct(struct task_struct *t) #define used_math() tsk_used_math(current) #ifdef CONFIG_SMP -extern int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask); +extern int set_cpus_allowed_ptr(struct task_struct *p, + const cpumask_t *new_mask); #else -static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) +static inline int set_cpus_allowed_ptr(struct task_struct *p, + const cpumask_t *new_mask) { - if (!cpu_isset(0, new_mask)) + if (!cpu_isset(0, *new_mask)) return -EINVAL; return 0; } #endif +static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) +{ + return set_cpus_allowed_ptr(p, &new_mask); +} extern unsigned long long sched_clock(void); @@ -1551,7 +1581,6 @@ static inline void wake_up_idle_cpu(int cpu) { } extern unsigned int sysctl_sched_latency; extern unsigned int sysctl_sched_min_granularity; extern unsigned int sysctl_sched_wakeup_granularity; -extern unsigned int sysctl_sched_batch_wakeup_granularity; extern unsigned int sysctl_sched_child_runs_first; extern unsigned int sysctl_sched_features; extern unsigned int sysctl_sched_migration_cost; @@ -1564,6 +1593,10 @@ int sched_nr_latency_handler(struct ctl_table *table, int write, extern unsigned int sysctl_sched_rt_period; extern int sysctl_sched_rt_runtime; +int sched_rt_handler(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, size_t *lenp, + loff_t *ppos); + extern unsigned int sysctl_sched_compat_yield; #ifdef CONFIG_RT_MUTEXES @@ -2031,7 +2064,7 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm) } #endif -extern long sched_setaffinity(pid_t pid, cpumask_t new_mask); +extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); extern long sched_getaffinity(pid_t pid, cpumask_t *mask); extern int sched_mc_power_savings, sched_smt_power_savings; @@ -2041,8 +2074,11 @@ extern void normalize_rt_tasks(void); #ifdef CONFIG_GROUP_SCHED extern struct task_group init_task_group; +#ifdef CONFIG_USER_SCHED +extern struct task_group root_task_group; +#endif -extern struct task_group *sched_create_group(void); +extern struct task_group *sched_create_group(struct task_group *parent); extern void sched_destroy_group(struct task_group *tg); extern void sched_move_task(struct task_struct *tsk); #ifdef CONFIG_FAIR_GROUP_SCHED @@ -2053,6 +2089,9 @@ extern unsigned long sched_group_shares(struct task_group *tg); extern int sched_group_set_rt_runtime(struct task_group *tg, long rt_runtime_us); extern long sched_group_rt_runtime(struct task_group *tg); +extern int sched_group_set_rt_period(struct task_group *tg, + long rt_period_us); +extern long sched_group_rt_period(struct task_group *tg); #endif #endif diff --git a/include/linux/security.h b/include/linux/security.h index fea1f4a..53a3453 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -230,7 +230,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the * pathname of the object being mounted. * @dev_name contains the name for object being mounted. - * @nd contains the nameidata structure for mount point object. + * @path contains the path for mount point object. * @type contains the filesystem type. * @flags contains the mount flags. * @data contains the filesystem-specific data. @@ -249,7 +249,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * Check permission before the device with superblock @mnt->sb is mounted * on the mount point named by @nd. * @mnt contains the vfsmount for device being mounted. - * @nd contains the nameidata object for the mount point. + * @path contains the path for the mount point. * Return 0 if permission is granted. * @sb_umount: * Check permission before the @mnt file system is unmounted. @@ -278,16 +278,16 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * This hook is called any time a mount is successfully grafetd to * the tree. * @mnt contains the mounted filesystem. - * @mountpoint_nd contains the nameidata structure for the mount point. + * @mountpoint contains the path for the mount point. * @sb_pivotroot: * Check permission before pivoting the root filesystem. - * @old_nd contains the nameidata structure for the new location of the current root (put_old). - * @new_nd contains the nameidata structure for the new root (new_root). + * @old_path contains the path for the new location of the current root (put_old). + * @new_path contains the path for the new root (new_root). * Return 0 if permission is granted. * @sb_post_pivotroot: * Update module state after a successful pivot. - * @old_nd contains the nameidata structure for the old root. - * @new_nd contains the nameidata structure for the new root. + * @old_path contains the path for the old root. + * @new_path contains the path for the new root. * @sb_get_mnt_opts: * Get the security relevant mount options used for a superblock * @sb the superblock to get security mount options from @@ -1315,20 +1315,20 @@ struct security_operations { int (*sb_copy_data)(char *orig, char *copy); int (*sb_kern_mount) (struct super_block *sb, void *data); int (*sb_statfs) (struct dentry *dentry); - int (*sb_mount) (char *dev_name, struct nameidata * nd, + int (*sb_mount) (char *dev_name, struct path *path, char *type, unsigned long flags, void *data); - int (*sb_check_sb) (struct vfsmount * mnt, struct nameidata * nd); + int (*sb_check_sb) (struct vfsmount * mnt, struct path *path); int (*sb_umount) (struct vfsmount * mnt, int flags); void (*sb_umount_close) (struct vfsmount * mnt); void (*sb_umount_busy) (struct vfsmount * mnt); void (*sb_post_remount) (struct vfsmount * mnt, unsigned long flags, void *data); void (*sb_post_addmount) (struct vfsmount * mnt, - struct nameidata * mountpoint_nd); - int (*sb_pivotroot) (struct nameidata * old_nd, - struct nameidata * new_nd); - void (*sb_post_pivotroot) (struct nameidata * old_nd, - struct nameidata * new_nd); + struct path *mountpoint); + int (*sb_pivotroot) (struct path *old_path, + struct path *new_path); + void (*sb_post_pivotroot) (struct path *old_path, + struct path *new_path); int (*sb_get_mnt_opts) (const struct super_block *sb, struct security_mnt_opts *opts); int (*sb_set_mnt_opts) (struct super_block *sb, @@ -1593,16 +1593,16 @@ void security_sb_free(struct super_block *sb); int security_sb_copy_data(char *orig, char *copy); int security_sb_kern_mount(struct super_block *sb, void *data); int security_sb_statfs(struct dentry *dentry); -int security_sb_mount(char *dev_name, struct nameidata *nd, +int security_sb_mount(char *dev_name, struct path *path, char *type, unsigned long flags, void *data); -int security_sb_check_sb(struct vfsmount *mnt, struct nameidata *nd); +int security_sb_check_sb(struct vfsmount *mnt, struct path *path); int security_sb_umount(struct vfsmount *mnt, int flags); void security_sb_umount_close(struct vfsmount *mnt); void security_sb_umount_busy(struct vfsmount *mnt); void security_sb_post_remount(struct vfsmount *mnt, unsigned long flags, void *data); -void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd); -int security_sb_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); -void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); +void security_sb_post_addmount(struct vfsmount *mnt, struct path *mountpoint); +int security_sb_pivotroot(struct path *old_path, struct path *new_path); +void security_sb_post_pivotroot(struct path *old_path, struct path *new_path); int security_sb_get_mnt_opts(const struct super_block *sb, struct security_mnt_opts *opts); int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts); @@ -1872,7 +1872,7 @@ static inline int security_sb_statfs (struct dentry *dentry) return 0; } -static inline int security_sb_mount (char *dev_name, struct nameidata *nd, +static inline int security_sb_mount (char *dev_name, struct path *path, char *type, unsigned long flags, void *data) { @@ -1880,7 +1880,7 @@ static inline int security_sb_mount (char *dev_name, struct nameidata *nd, } static inline int security_sb_check_sb (struct vfsmount *mnt, - struct nameidata *nd) + struct path *path) { return 0; } @@ -1901,17 +1901,17 @@ static inline void security_sb_post_remount (struct vfsmount *mnt, { } static inline void security_sb_post_addmount (struct vfsmount *mnt, - struct nameidata *mountpoint_nd) + struct path *mountpoint) { } -static inline int security_sb_pivotroot (struct nameidata *old_nd, - struct nameidata *new_nd) +static inline int security_sb_pivotroot (struct path *old_path, + struct path *new_path) { return 0; } -static inline void security_sb_post_pivotroot (struct nameidata *old_nd, - struct nameidata *new_nd) +static inline void security_sb_post_pivotroot (struct path *old_path, + struct path *new_path) { } static inline int security_sb_get_mnt_opts(const struct super_block *sb, struct security_mnt_opts *opts) diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 1da1e62..5b5369c 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -10,6 +10,7 @@ struct seq_operations; struct file; struct path; struct inode; +struct dentry; struct seq_file { char *buf; @@ -30,6 +31,8 @@ struct seq_operations { int (*show) (struct seq_file *m, void *v); }; +#define SEQ_SKIP 1 + int seq_open(struct file *, const struct seq_operations *); ssize_t seq_read(struct file *, char __user *, size_t, loff_t *); loff_t seq_lseek(struct file *, loff_t, int); @@ -42,6 +45,9 @@ int seq_printf(struct seq_file *, const char *, ...) __attribute__ ((format (printf,2,3))); int seq_path(struct seq_file *, struct path *, char *); +int seq_dentry(struct seq_file *, struct dentry *, char *); +int seq_path_root(struct seq_file *m, struct path *path, struct path *root, + char *esc); int single_open(struct file *, int (*)(struct seq_file *, void *), void *); int single_release(struct inode *, struct file *); diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 7a69ca3..3f63218 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -26,6 +26,7 @@ struct auth_cred { uid_t uid; gid_t gid; struct group_info *group_info; + unsigned char machine_cred : 1; }; /* @@ -59,8 +60,8 @@ struct rpc_cred { /* * Client authentication handle */ -#define RPC_CREDCACHE_NR 8 -#define RPC_CREDCACHE_MASK (RPC_CREDCACHE_NR - 1) +#define RPC_CREDCACHE_HASHBITS 4 +#define RPC_CREDCACHE_NR (1 << RPC_CREDCACHE_HASHBITS) struct rpc_cred_cache { struct hlist_head hashtable[RPC_CREDCACHE_NR]; spinlock_t lock; @@ -89,7 +90,6 @@ struct rpc_auth { /* Flags for rpcauth_lookupcred() */ #define RPCAUTH_LOOKUP_NEW 0x01 /* Accept an uninitialised cred */ -#define RPCAUTH_LOOKUP_ROOTCREDS 0x02 /* This really ought to go! */ /* * Client authentication ops @@ -97,9 +97,7 @@ struct rpc_auth { struct rpc_authops { struct module *owner; rpc_authflavor_t au_flavor; /* flavor (RPC_AUTH_*) */ -#ifdef RPC_DEBUG char * au_name; -#endif struct rpc_auth * (*create)(struct rpc_clnt *, rpc_authflavor_t); void (*destroy)(struct rpc_auth *); @@ -113,6 +111,7 @@ struct rpc_credops { void (*crdestroy)(struct rpc_cred *); int (*crmatch)(struct auth_cred *, struct rpc_cred *, int); + void (*crbind)(struct rpc_task *, struct rpc_cred *); __be32 * (*crmarshal)(struct rpc_task *, __be32 *); int (*crrefresh)(struct rpc_task *); __be32 * (*crvalidate)(struct rpc_task *, __be32 *); @@ -126,9 +125,13 @@ extern const struct rpc_authops authunix_ops; extern const struct rpc_authops authnull_ops; void __init rpc_init_authunix(void); +void __init rpc_init_generic_auth(void); void __init rpcauth_init_module(void); void __exit rpcauth_remove_module(void); +void __exit rpc_destroy_generic_auth(void); +struct rpc_cred * rpc_lookup_cred(void); +struct rpc_cred * rpc_lookup_machine_cred(void); int rpcauth_register(const struct rpc_authops *); int rpcauth_unregister(const struct rpc_authops *); struct rpc_auth * rpcauth_create(rpc_authflavor_t, struct rpc_clnt *); @@ -136,8 +139,8 @@ void rpcauth_release(struct rpc_auth *); struct rpc_cred * rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int); void rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *); struct rpc_cred * rpcauth_lookupcred(struct rpc_auth *, int); -struct rpc_cred * rpcauth_bindcred(struct rpc_task *); -void rpcauth_holdcred(struct rpc_task *); +void rpcauth_bindcred(struct rpc_task *, struct rpc_cred *, int); +void rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *); void put_rpccred(struct rpc_cred *); void rpcauth_unbindcred(struct rpc_task *); __be32 * rpcauth_marshcred(struct rpc_task *, __be32 *); diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h index 67658e1..fec6899 100644 --- a/include/linux/sunrpc/auth_gss.h +++ b/include/linux/sunrpc/auth_gss.h @@ -84,6 +84,7 @@ struct gss_cred { enum rpc_gss_svc gc_service; struct gss_cl_ctx *gc_ctx; struct gss_upcall_msg *gc_upcall; + unsigned char gc_machine_cred : 1; }; #endif /* __KERNEL__ */ diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 03547d6..2d8b211 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -120,7 +120,6 @@ struct cache_deferred_req { struct list_head hash; /* on hash chain */ struct list_head recent; /* on fifo */ struct cache_head *item; /* cache item we wait on */ - time_t recv_time; void *owner; /* we might need to discard all defered requests * owned by someone */ void (*revisit)(struct cache_deferred_req *req, diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 129a86e..6fff7f8 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -127,11 +127,12 @@ int rpcb_getport_sync(struct sockaddr_in *, u32, u32, int); void rpcb_getport_async(struct rpc_task *); void rpc_call_start(struct rpc_task *); -int rpc_call_async(struct rpc_clnt *clnt, struct rpc_message *msg, - int flags, const struct rpc_call_ops *tk_ops, +int rpc_call_async(struct rpc_clnt *clnt, + const struct rpc_message *msg, int flags, + const struct rpc_call_ops *tk_ops, void *calldata); -int rpc_call_sync(struct rpc_clnt *clnt, struct rpc_message *msg, - int flags); +int rpc_call_sync(struct rpc_clnt *clnt, + const struct rpc_message *msg, int flags); struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred, int flags); void rpc_restart_call(struct rpc_task *); diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h index 5a4b1e0..a10f1fb 100644 --- a/include/linux/sunrpc/gss_krb5.h +++ b/include/linux/sunrpc/gss_krb5.h @@ -70,8 +70,6 @@ enum seal_alg { SEAL_ALG_DES3KD = 0x0002 }; -#define KRB5_CKSUM_LENGTH 8 - #define CKSUMTYPE_CRC32 0x0001 #define CKSUMTYPE_RSA_MD4 0x0002 #define CKSUMTYPE_RSA_MD4_DES 0x0003 @@ -150,9 +148,9 @@ gss_decrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *inbuf, s32 krb5_make_seq_num(struct crypto_blkcipher *key, int direction, - s32 seqnum, unsigned char *cksum, unsigned char *buf); + u32 seqnum, unsigned char *cksum, unsigned char *buf); s32 krb5_get_seq_num(struct crypto_blkcipher *key, unsigned char *cksum, - unsigned char *buf, int *direction, s32 * seqnum); + unsigned char *buf, int *direction, u32 *seqnum); diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index f689f02..d1a5c8c 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -11,7 +11,6 @@ #include <linux/timer.h> #include <linux/sunrpc/types.h> -#include <linux/rcupdate.h> #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/workqueue.h> @@ -33,7 +32,8 @@ struct rpc_wait_queue; struct rpc_wait { struct list_head list; /* wait queue links */ struct list_head links; /* Links to related tasks */ - struct rpc_wait_queue * rpc_waitq; /* RPC wait queue we're on */ + struct list_head timer_list; /* Timer list */ + unsigned long expires; }; /* @@ -57,33 +57,25 @@ struct rpc_task { __u8 tk_cred_retry; /* - * timeout_fn to be executed by timer bottom half * callback to be executed after waking up * action next procedure for async tasks * tk_ops caller callbacks */ - void (*tk_timeout_fn)(struct rpc_task *); void (*tk_callback)(struct rpc_task *); void (*tk_action)(struct rpc_task *); const struct rpc_call_ops *tk_ops; void * tk_calldata; - /* - * tk_timer is used for async processing by the RPC scheduling - * primitives. You should not access this directly unless - * you have a pathological interest in kernel oopses. - */ - struct timer_list tk_timer; /* kernel timer */ unsigned long tk_timeout; /* timeout for rpc_sleep() */ unsigned short tk_flags; /* misc flags */ unsigned long tk_runstate; /* Task run status */ struct workqueue_struct *tk_workqueue; /* Normally rpciod, but could * be any workqueue */ + struct rpc_wait_queue *tk_waitqueue; /* RPC wait queue we're on */ union { struct work_struct tk_work; /* Async task work queue */ struct rpc_wait tk_wait; /* RPC wait */ - struct rcu_head tk_rcu; /* for task deletion */ } u; unsigned short tk_timeouts; /* maj timeouts */ @@ -123,6 +115,7 @@ struct rpc_task_setup { const struct rpc_message *rpc_message; const struct rpc_call_ops *callback_ops; void *callback_data; + struct workqueue_struct *workqueue; unsigned short flags; signed char priority; }; @@ -147,9 +140,7 @@ struct rpc_task_setup { #define RPC_TASK_RUNNING 0 #define RPC_TASK_QUEUED 1 -#define RPC_TASK_WAKEUP 2 -#define RPC_TASK_HAS_TIMER 3 -#define RPC_TASK_ACTIVE 4 +#define RPC_TASK_ACTIVE 2 #define RPC_IS_RUNNING(t) test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) #define rpc_set_running(t) set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate) @@ -171,15 +162,6 @@ struct rpc_task_setup { smp_mb__after_clear_bit(); \ } while (0) -#define rpc_start_wakeup(t) \ - (test_and_set_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate) == 0) -#define rpc_finish_wakeup(t) \ - do { \ - smp_mb__before_clear_bit(); \ - clear_bit(RPC_TASK_WAKEUP, &(t)->tk_runstate); \ - smp_mb__after_clear_bit(); \ - } while (0) - #define RPC_IS_ACTIVATED(t) test_bit(RPC_TASK_ACTIVE, &(t)->tk_runstate) /* @@ -192,6 +174,12 @@ struct rpc_task_setup { #define RPC_PRIORITY_HIGH (1) #define RPC_NR_PRIORITY (1 + RPC_PRIORITY_HIGH - RPC_PRIORITY_LOW) +struct rpc_timer { + struct timer_list timer; + struct list_head list; + unsigned long expires; +}; + /* * RPC synchronization objects */ @@ -204,6 +192,7 @@ struct rpc_wait_queue { unsigned char count; /* # task groups remaining serviced so far */ unsigned char nr; /* # tasks remaining for cookie */ unsigned short qlen; /* total # tasks waiting in queue */ + struct rpc_timer timer_list; #ifdef RPC_DEBUG const char * name; #endif @@ -229,9 +218,11 @@ void rpc_killall_tasks(struct rpc_clnt *); void rpc_execute(struct rpc_task *); void rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *); void rpc_init_wait_queue(struct rpc_wait_queue *, const char *); +void rpc_destroy_wait_queue(struct rpc_wait_queue *); void rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *, - rpc_action action, rpc_action timer); -void rpc_wake_up_task(struct rpc_task *); + rpc_action action); +void rpc_wake_up_queued_task(struct rpc_wait_queue *, + struct rpc_task *); void rpc_wake_up(struct rpc_wait_queue *); struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *); void rpc_wake_up_status(struct rpc_wait_queue *, int); diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 64c9755..4b54c5f 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -386,7 +386,6 @@ struct svc_serv * svc_create(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv*)); struct svc_rqst *svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool); -int svc_create_thread(svc_thread_fn, struct svc_serv *); void svc_exit_thread(struct svc_rqst *); struct svc_serv * svc_create_pooled(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv*), diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h index 22e1ef8..d39dbdc 100644 --- a/include/linux/sunrpc/svcauth.h +++ b/include/linux/sunrpc/svcauth.h @@ -24,6 +24,7 @@ struct svc_cred { }; struct svc_rqst; /* forward decl */ +struct in6_addr; /* Authentication is done in the context of a domain. * @@ -120,10 +121,10 @@ extern void svc_auth_unregister(rpc_authflavor_t flavor); extern struct auth_domain *unix_domain_find(char *name); extern void auth_domain_put(struct auth_domain *item); -extern int auth_unix_add_addr(struct in_addr addr, struct auth_domain *dom); +extern int auth_unix_add_addr(struct in6_addr *addr, struct auth_domain *dom); extern struct auth_domain *auth_domain_lookup(char *name, struct auth_domain *new); extern struct auth_domain *auth_domain_find(char *name); -extern struct auth_domain *auth_unix_lookup(struct in_addr addr); +extern struct auth_domain *auth_unix_lookup(struct in6_addr *addr); extern int auth_unix_forget_old(struct auth_domain *dom); extern void svcauth_unix_purge(void); extern void svcauth_unix_info_release(void *); diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 206f092..8cff696 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -26,8 +26,8 @@ struct svc_sock { void (*sk_owspace)(struct sock *); /* private TCP part */ - int sk_reclen; /* length of record */ - int sk_tcplen; /* current read length */ + u32 sk_reclen; /* length of record */ + u32 sk_tcplen; /* current read length */ }; /* diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index b3ff9a8..4d80a11 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -86,6 +86,10 @@ struct rpc_rqst { unsigned long rq_majortimeo; /* major timeout alarm */ unsigned long rq_timeout; /* Current timeout value */ unsigned int rq_retries; /* # of retries */ + unsigned int rq_connect_cookie; + /* A cookie used to track the + state of the transport + connection */ /* * Partial send handling @@ -152,6 +156,9 @@ struct rpc_xprt { unsigned long connect_timeout, bind_timeout, reestablish_timeout; + unsigned int connect_cookie; /* A cookie that gets bumped + every time the transport + is reconnected */ /* * Disconnection of idle transports @@ -232,7 +239,7 @@ int xprt_unregister_transport(struct xprt_class *type); void xprt_set_retrans_timeout_def(struct rpc_task *task); void xprt_set_retrans_timeout_rtt(struct rpc_task *task); void xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status); -void xprt_wait_for_buffer_space(struct rpc_task *task); +void xprt_wait_for_buffer_space(struct rpc_task *task, rpc_action action); void xprt_write_space(struct rpc_xprt *xprt); void xprt_update_rtt(struct rpc_task *task); void xprt_adjust_cwnd(struct rpc_task *task, int result); @@ -241,6 +248,7 @@ void xprt_complete_rqst(struct rpc_task *task, int copied); void xprt_release_rqst_cong(struct rpc_task *task); void xprt_disconnect_done(struct rpc_xprt *xprt); void xprt_force_disconnect(struct rpc_xprt *xprt); +void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); /* * Reserved bit positions in xprt->state diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 4c2577b..8df6d13 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -60,7 +60,6 @@ struct getcpu_cache; #include <linux/capability.h> #include <linux/list.h> #include <linux/sem.h> -#include <asm/semaphore.h> #include <asm/siginfo.h> #include <asm/signal.h> #include <linux/quota.h> diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index f752e73..f2767bc 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -45,12 +45,16 @@ struct sysdev_class_attribute { ssize_t (*store)(struct sysdev_class *, const char *, size_t); }; -#define SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \ -struct sysdev_class_attribute attr_##_name = { \ +#define _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \ +{ \ .attr = {.name = __stringify(_name), .mode = _mode }, \ .show = _show, \ .store = _store, \ -}; +} + +#define SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \ + struct sysdev_class_attribute attr_##_name = \ + _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) extern int sysdev_class_register(struct sysdev_class *); @@ -100,15 +104,16 @@ struct sysdev_attribute { }; -#define _SYSDEV_ATTR(_name,_mode,_show,_store) \ +#define _SYSDEV_ATTR(_name, _mode, _show, _store) \ { \ .attr = { .name = __stringify(_name), .mode = _mode }, \ .show = _show, \ .store = _store, \ } -#define SYSDEV_ATTR(_name,_mode,_show,_store) \ -struct sysdev_attribute attr_##_name = _SYSDEV_ATTR(_name,_mode,_show,_store); +#define SYSDEV_ATTR(_name, _mode, _show, _store) \ + struct sysdev_attribute attr_##_name = \ + _SYSDEV_ATTR(_name, _mode, _show, _store); extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *); extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 8027104..03378e3 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -131,7 +131,6 @@ static inline int sysfs_create_dir(struct kobject *kobj) static inline void sysfs_remove_dir(struct kobject *kobj) { - ; } static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name) @@ -160,7 +159,6 @@ static inline int sysfs_chmod_file(struct kobject *kobj, static inline void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr) { - ; } static inline int sysfs_create_bin_file(struct kobject *kobj, @@ -169,10 +167,9 @@ static inline int sysfs_create_bin_file(struct kobject *kobj, return 0; } -static inline int sysfs_remove_bin_file(struct kobject *kobj, - struct bin_attribute *attr) +static inline void sysfs_remove_bin_file(struct kobject *kobj, + struct bin_attribute *attr) { - return 0; } static inline int sysfs_create_link(struct kobject *kobj, @@ -183,7 +180,6 @@ static inline int sysfs_create_link(struct kobject *kobj, static inline void sysfs_remove_link(struct kobject *kobj, const char *name) { - ; } static inline int sysfs_create_group(struct kobject *kobj, @@ -195,7 +191,6 @@ static inline int sysfs_create_group(struct kobject *kobj, static inline void sysfs_remove_group(struct kobject *kobj, const struct attribute_group *grp) { - ; } static inline int sysfs_add_file_to_group(struct kobject *kobj, diff --git a/include/linux/topology.h b/include/linux/topology.h index bd14f8b..4bb7074 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -38,16 +38,15 @@ #endif #ifndef nr_cpus_node -#define nr_cpus_node(node) \ - ({ \ - cpumask_t __tmp__; \ - __tmp__ = node_to_cpumask(node); \ - cpus_weight(__tmp__); \ +#define nr_cpus_node(node) \ + ({ \ + node_to_cpumask_ptr(__tmp__, node); \ + cpus_weight(*__tmp__); \ }) #endif -#define for_each_node_with_cpus(node) \ - for_each_online_node(node) \ +#define for_each_node_with_cpus(node) \ + for_each_online_node(node) \ if (nr_cpus_node(node)) void arch_update_cpu_topology(void); @@ -80,7 +79,9 @@ void arch_update_cpu_topology(void); * by defining their own arch-specific initializer in include/asm/topology.h. * A definition there will automagically override these default initializers * and allow arch-specific performance tuning of sched_domains. + * (Only non-zero and non-null fields need be specified.) */ + #ifdef CONFIG_SCHED_SMT /* MCD - Do we really need this? It is always on if CONFIG_SCHED_SMT is, * so can't we drop this in favor of CONFIG_SCHED_SMT? @@ -89,20 +90,10 @@ void arch_update_cpu_topology(void); /* Common values for SMT siblings */ #ifndef SD_SIBLING_INIT #define SD_SIBLING_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ .min_interval = 1, \ .max_interval = 2, \ .busy_factor = 64, \ .imbalance_pct = 110, \ - .cache_nice_tries = 0, \ - .busy_idx = 0, \ - .idle_idx = 0, \ - .newidle_idx = 0, \ - .wake_idx = 0, \ - .forkexec_idx = 0, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_NEWIDLE \ | SD_BALANCE_FORK \ @@ -112,7 +103,6 @@ void arch_update_cpu_topology(void); | SD_SHARE_CPUPOWER, \ .last_balance = jiffies, \ .balance_interval = 1, \ - .nr_balance_failed = 0, \ } #endif #endif /* CONFIG_SCHED_SMT */ @@ -121,18 +111,12 @@ void arch_update_cpu_topology(void); /* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */ #ifndef SD_MC_INIT #define SD_MC_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ .min_interval = 1, \ .max_interval = 4, \ .busy_factor = 64, \ .imbalance_pct = 125, \ .cache_nice_tries = 1, \ .busy_idx = 2, \ - .idle_idx = 0, \ - .newidle_idx = 0, \ .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ @@ -144,7 +128,6 @@ void arch_update_cpu_topology(void); | BALANCE_FOR_MC_POWER, \ .last_balance = jiffies, \ .balance_interval = 1, \ - .nr_balance_failed = 0, \ } #endif #endif /* CONFIG_SCHED_MC */ @@ -152,10 +135,6 @@ void arch_update_cpu_topology(void); /* Common values for CPUs */ #ifndef SD_CPU_INIT #define SD_CPU_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ .min_interval = 1, \ .max_interval = 4, \ .busy_factor = 64, \ @@ -174,16 +153,11 @@ void arch_update_cpu_topology(void); | BALANCE_FOR_PKG_POWER,\ .last_balance = jiffies, \ .balance_interval = 1, \ - .nr_balance_failed = 0, \ } #endif /* sched_domains SD_ALLNODES_INIT for NUMA machines */ #define SD_ALLNODES_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ .min_interval = 64, \ .max_interval = 64*num_online_cpus(), \ .busy_factor = 128, \ @@ -191,14 +165,10 @@ void arch_update_cpu_topology(void); .cache_nice_tries = 1, \ .busy_idx = 3, \ .idle_idx = 3, \ - .newidle_idx = 0, /* unused */ \ - .wake_idx = 0, /* unused */ \ - .forkexec_idx = 0, /* unused */ \ .flags = SD_LOAD_BALANCE \ | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 64, \ - .nr_balance_failed = 0, \ } #ifdef CONFIG_NUMA diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h index 6696cf7..eaec1ea 100644 --- a/include/linux/transport_class.h +++ b/include/linux/transport_class.h @@ -17,11 +17,11 @@ struct transport_container; struct transport_class { struct class class; int (*setup)(struct transport_container *, struct device *, - struct class_device *); + struct device *); int (*configure)(struct transport_container *, struct device *, - struct class_device *); + struct device *); int (*remove)(struct transport_container *, struct device *, - struct class_device *); + struct device *); }; #define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg) \ diff --git a/include/linux/udf_fs.h b/include/linux/udf_fs.h deleted file mode 100644 index aa88654..0000000 --- a/include/linux/udf_fs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * udf_fs.h - * - * PURPOSE - * Included by fs/filesystems.c - * - * DESCRIPTION - * OSTA-UDF(tm) = Optical Storage Technology Association - * Universal Disk Format. - * - * This code is based on version 2.50 of the UDF specification, - * and revision 3 of the ECMA 167 standard [equivalent to ISO 13346]. - * http://www.osta.org/ * http://www.ecma.ch/ - * http://www.iso.org/ - * - * COPYRIGHT - * This file is distributed under the terms of the GNU General Public - * License (GPL). Copies of the GPL can be obtained from: - * ftp://prep.ai.mit.edu/pub/gnu/GPL - * Each contributing author retains all rights to their own work. - * - * (C) 1999-2004 Ben Fennema - * (C) 1999-2000 Stelias Computing Inc - * - * HISTORY - * - */ - -#ifndef _UDF_FS_H -#define _UDF_FS_H 1 - -#define UDF_PREALLOCATE -#define UDF_DEFAULT_PREALLOC_BLOCKS 8 - -#undef UDFFS_DEBUG - -#ifdef UDFFS_DEBUG -#define udf_debug(f, a...) \ - do { \ - printk (KERN_DEBUG "UDF-fs DEBUG %s:%d:%s: ", \ - __FILE__, __LINE__, __FUNCTION__); \ - printk (f, ##a); \ - } while (0) -#else -#define udf_debug(f, a...) /**/ -#endif - -#define udf_info(f, a...) \ - printk (KERN_INFO "UDF-fs INFO " f, ##a); - -#endif /* _UDF_FS_H */ diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h index ffaf056..3536965 100644 --- a/include/linux/udf_fs_i.h +++ b/include/linux/udf_fs_i.h @@ -9,41 +9,10 @@ * ftp://prep.ai.mit.edu/pub/gnu/GPL * Each contributing author retains all rights to their own work. */ - #ifndef _UDF_FS_I_H #define _UDF_FS_I_H 1 -#ifdef __KERNEL__ - -struct udf_inode_info -{ - struct timespec i_crtime; - /* Physical address of inode */ - kernel_lb_addr i_location; - __u64 i_unique; - __u32 i_lenEAttr; - __u32 i_lenAlloc; - __u64 i_lenExtents; - __u32 i_next_alloc_block; - __u32 i_next_alloc_goal; - unsigned i_alloc_type : 3; - unsigned i_efe : 1; - unsigned i_use : 1; - unsigned i_strat4096 : 1; - unsigned reserved : 26; - union - { - short_ad *i_sad; - long_ad *i_lad; - __u8 *i_data; - } i_ext; - struct inode vfs_inode; -}; - -#endif - /* exported IOCTLs, we have 'l', 0x40-0x7f */ - #define UDF_GETEASIZE _IOR('l', 0x40, int) #define UDF_GETEABLOCK _IOR('l', 0x41, void *) #define UDF_GETVOLIDENT _IOR('l', 0x42, void *) diff --git a/include/linux/udf_fs_sb.h b/include/linux/udf_fs_sb.h deleted file mode 100644 index 9bc4735..0000000 --- a/include/linux/udf_fs_sb.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * udf_fs_sb.h - * - * This include file is for the Linux kernel/module. - * - * COPYRIGHT - * This file is distributed under the terms of the GNU General Public - * License (GPL). Copies of the GPL can be obtained from: - * ftp://prep.ai.mit.edu/pub/gnu/GPL - * Each contributing author retains all rights to their own work. - */ - -#ifndef _UDF_FS_SB_H -#define _UDF_FS_SB_H 1 - -#include <linux/mutex.h> - -#pragma pack(1) - -#define UDF_MAX_BLOCK_LOADED 8 - -#define UDF_TYPE1_MAP15 0x1511U -#define UDF_VIRTUAL_MAP15 0x1512U -#define UDF_VIRTUAL_MAP20 0x2012U -#define UDF_SPARABLE_MAP15 0x1522U - -struct udf_sparing_data -{ - __u16 s_packet_len; - struct buffer_head *s_spar_map[4]; -}; - -struct udf_virtual_data -{ - __u32 s_num_entries; - __u16 s_start_offset; -}; - -struct udf_bitmap -{ - __u32 s_extLength; - __u32 s_extPosition; - __u16 s_nr_groups; - struct buffer_head **s_block_bitmap; -}; - -struct udf_part_map -{ - union - { - struct udf_bitmap *s_bitmap; - struct inode *s_table; - } s_uspace; - union - { - struct udf_bitmap *s_bitmap; - struct inode *s_table; - } s_fspace; - __u32 s_partition_root; - __u32 s_partition_len; - __u16 s_partition_type; - __u16 s_partition_num; - union - { - struct udf_sparing_data s_sparing; - struct udf_virtual_data s_virtual; - } s_type_specific; - __u32 (*s_partition_func)(struct super_block *, __u32, __u16, __u32); - __u16 s_volumeseqnum; - __u16 s_partition_flags; -}; - -#pragma pack() - -struct udf_sb_info -{ - struct udf_part_map *s_partmaps; - __u8 s_volume_ident[32]; - - /* Overall info */ - __u16 s_partitions; - __u16 s_partition; - - /* Sector headers */ - __s32 s_session; - __u32 s_anchor[4]; - __u32 s_last_block; - - struct buffer_head *s_lvid_bh; - - /* Default permissions */ - mode_t s_umask; - gid_t s_gid; - uid_t s_uid; - - /* Root Info */ - struct timespec s_record_time; - - /* Fileset Info */ - __u16 s_serial_number; - - /* highest UDF revision we have recorded to this media */ - __u16 s_udfrev; - - /* Miscellaneous flags */ - __u32 s_flags; - - /* Encoding info */ - struct nls_table *s_nls_map; - - /* VAT inode */ - struct inode *s_vat_inode; - - struct mutex s_alloc_mutex; -}; - -#endif /* _UDF_FS_SB_H */ diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h new file mode 100644 index 0000000..6311fa2 --- /dev/null +++ b/include/linux/usb/atmel_usba_udc.h @@ -0,0 +1,22 @@ +/* + * Platform data definitions for Atmel USBA gadget driver. + */ +#ifndef __LINUX_USB_USBA_H +#define __LINUX_USB_USBA_H + +struct usba_ep_data { + char *name; + int index; + int fifo_size; + int nr_banks; + int can_dma; + int can_isoc; +}; + +struct usba_platform_data { + int vbus_pin; + int num_ep; + struct usba_ep_data ep[0]; +}; + +#endif /* __LINUX_USB_USBA_H */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 17a8017..c141118 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -282,6 +282,7 @@ struct v4l2_pix_format #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B','G','R','4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R','G','B','4') /* 32 RGB-8-8-8-8 */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G','R','E','Y') /* 8 Greyscale */ +#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y','1','6',' ') /* 16 Greyscale */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P','A','L','8') /* 8 8-bit palette */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y','V','U','9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y','V','1','2') /* 12 YVU 4:2:0 */ @@ -308,6 +309,7 @@ struct v4l2_pix_format /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */ +#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16 BGBG.. GRGR.. */ /* compressed formats */ #define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M','J','P','G') /* Motion-JPEG */ @@ -793,6 +795,7 @@ struct v4l2_ext_controls /* Values for ctrl_class field */ #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ +#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -849,21 +852,37 @@ struct v4l2_querymenu #define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) #define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) #define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) -#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) +#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) /* Deprecated */ #define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) #define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) #define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) #define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) #define V4L2_CID_GAMMA (V4L2_CID_BASE+16) -#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* ? Not sure */ +#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* Deprecated */ #define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) #define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) #define V4L2_CID_GAIN (V4L2_CID_BASE+19) #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* last CID + 1 */ + +/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ +#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) +#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) + +#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) +enum v4l2_power_line_frequency { + V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, + V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1, + V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2, +}; +#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25) +#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26) +#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27) +#define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28) +#define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29) +#define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30) +/* last CID + 1 */ +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+31) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) @@ -1051,6 +1070,32 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type { #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) #define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) +/* Camera class control IDs */ +#define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) +#define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1) + +#define V4L2_CID_EXPOSURE_AUTO (V4L2_CID_CAMERA_CLASS_BASE+1) +enum v4l2_exposure_auto_type { + V4L2_EXPOSURE_AUTO = 0, + V4L2_EXPOSURE_MANUAL = 1, + V4L2_EXPOSURE_SHUTTER_PRIORITY = 2, + V4L2_EXPOSURE_APERTURE_PRIORITY = 3 +}; +#define V4L2_CID_EXPOSURE_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+2) +#define V4L2_CID_EXPOSURE_AUTO_PRIORITY (V4L2_CID_CAMERA_CLASS_BASE+3) + +#define V4L2_CID_PAN_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+4) +#define V4L2_CID_TILT_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+5) +#define V4L2_CID_PAN_RESET (V4L2_CID_CAMERA_CLASS_BASE+6) +#define V4L2_CID_TILT_RESET (V4L2_CID_CAMERA_CLASS_BASE+7) + +#define V4L2_CID_PAN_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+8) +#define V4L2_CID_TILT_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+9) + +#define V4L2_CID_FOCUS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+10) +#define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11) +#define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12) + /* * T U N I N G */ diff --git a/include/media/ir-common.h b/include/media/ir-common.h index a427420..bfee8be 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -107,6 +107,7 @@ extern IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_pixelview_new[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_dntv_live_dvb_t[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_iodata_bctv7e[IR_KEYTAB_SIZE]; @@ -141,8 +142,10 @@ extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_behold_columbus[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; #endif diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h new file mode 100644 index 0000000..6a8c8be7 --- /dev/null +++ b/include/media/soc_camera.h @@ -0,0 +1,179 @@ +/* + * camera image capture (abstract) bus driver header + * + * Copyright (C) 2006, Sascha Hauer, Pengutronix + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SOC_CAMERA_H +#define SOC_CAMERA_H + +#include <linux/videodev2.h> +#include <media/videobuf-dma-sg.h> + +struct soc_camera_device { + struct list_head list; + struct device dev; + struct device *control; + unsigned short width; /* Current window */ + unsigned short height; /* sizes */ + unsigned short x_min; /* Camera capabilities */ + unsigned short y_min; + unsigned short x_current; /* Current window location */ + unsigned short y_current; + unsigned short width_min; + unsigned short width_max; + unsigned short height_min; + unsigned short height_max; + unsigned short y_skip_top; /* Lines to skip at the top */ + unsigned short gain; + unsigned short exposure; + unsigned char iface; /* Host number */ + unsigned char devnum; /* Device number per host */ + unsigned char buswidth; /* See comment in .c */ + struct soc_camera_ops *ops; + struct video_device *vdev; + const struct soc_camera_data_format *current_fmt; + const struct soc_camera_data_format *formats; + int num_formats; + struct module *owner; + /* soc_camera.c private count. Only accessed with video_lock held */ + int use_count; +}; + +struct soc_camera_file { + struct soc_camera_device *icd; + struct videobuf_queue vb_vidq; + spinlock_t *lock; +}; + +struct soc_camera_host { + struct list_head list; + struct device dev; + unsigned char nr; /* Host number */ + size_t msize; + struct videobuf_queue_ops *vbq_ops; + void *priv; + char *drv_name; + struct soc_camera_host_ops *ops; +}; + +struct soc_camera_host_ops { + struct module *owner; + int (*add)(struct soc_camera_device *); + void (*remove)(struct soc_camera_device *); + int (*set_fmt_cap)(struct soc_camera_device *, __u32, + struct v4l2_rect *); + int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); + int (*reqbufs)(struct soc_camera_file *, struct v4l2_requestbuffers *); + int (*querycap)(struct soc_camera_host *, struct v4l2_capability *); + int (*try_bus_param)(struct soc_camera_device *, __u32); + int (*set_bus_param)(struct soc_camera_device *, __u32); + unsigned int (*poll)(struct file *, poll_table *); + spinlock_t* (*spinlock_alloc)(struct soc_camera_file *); + void (*spinlock_free)(spinlock_t *); +}; + +struct soc_camera_link { + /* Camera bus id, used to match a camera and a bus */ + int bus_id; + /* GPIO number to switch between 8 and 10 bit modes */ + unsigned int gpio; +}; + +static inline struct soc_camera_device *to_soc_camera_dev(struct device *dev) +{ + return container_of(dev, struct soc_camera_device, dev); +} + +static inline struct soc_camera_host *to_soc_camera_host(struct device *dev) +{ + return container_of(dev, struct soc_camera_host, dev); +} + +extern int soc_camera_host_register(struct soc_camera_host *ici); +extern void soc_camera_host_unregister(struct soc_camera_host *ici); +extern int soc_camera_device_register(struct soc_camera_device *icd); +extern void soc_camera_device_unregister(struct soc_camera_device *icd); + +extern int soc_camera_video_start(struct soc_camera_device *icd); +extern void soc_camera_video_stop(struct soc_camera_device *icd); + +struct soc_camera_data_format { + char *name; + unsigned int depth; + __u32 fourcc; + enum v4l2_colorspace colorspace; +}; + +struct soc_camera_ops { + struct module *owner; + int (*probe)(struct soc_camera_device *); + void (*remove)(struct soc_camera_device *); + int (*init)(struct soc_camera_device *); + int (*release)(struct soc_camera_device *); + int (*start_capture)(struct soc_camera_device *); + int (*stop_capture)(struct soc_camera_device *); + int (*set_fmt_cap)(struct soc_camera_device *, __u32, + struct v4l2_rect *); + int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); + unsigned long (*query_bus_param)(struct soc_camera_device *); + int (*set_bus_param)(struct soc_camera_device *, unsigned long); + int (*get_chip_id)(struct soc_camera_device *, + struct v4l2_chip_ident *); +#ifdef CONFIG_VIDEO_ADV_DEBUG + int (*get_register)(struct soc_camera_device *, struct v4l2_register *); + int (*set_register)(struct soc_camera_device *, struct v4l2_register *); +#endif + int (*get_control)(struct soc_camera_device *, struct v4l2_control *); + int (*set_control)(struct soc_camera_device *, struct v4l2_control *); + const struct v4l2_queryctrl *controls; + int num_controls; +}; + +static inline struct v4l2_queryctrl const *soc_camera_find_qctrl( + struct soc_camera_ops *ops, int id) +{ + int i; + + for (i = 0; i < ops->num_controls; i++) + if (ops->controls[i].id == id) + return &ops->controls[i]; + + return NULL; +} + +#define SOCAM_MASTER (1 << 0) +#define SOCAM_SLAVE (1 << 1) +#define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2) +#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3) +#define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4) +#define SOCAM_VSYNC_ACTIVE_LOW (1 << 5) +#define SOCAM_DATAWIDTH_8 (1 << 6) +#define SOCAM_DATAWIDTH_9 (1 << 7) +#define SOCAM_DATAWIDTH_10 (1 << 8) +#define SOCAM_PCLK_SAMPLE_RISING (1 << 9) +#define SOCAM_PCLK_SAMPLE_FALLING (1 << 10) + +#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_9 | \ + SOCAM_DATAWIDTH_10) + +static inline unsigned long soc_camera_bus_param_compatible( + unsigned long camera_flags, unsigned long bus_flags) +{ + unsigned long common_flags, hsync, vsync, pclk; + + common_flags = camera_flags & bus_flags; + + hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW); + vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW); + pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING); + + return (!hsync || !vsync || !pclk) ? 0 : common_flags; +} + +#endif diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h index b201371..ab03c53 100644 --- a/include/media/tuner-types.h +++ b/include/media/tuner-types.h @@ -6,10 +6,11 @@ #define __TUNER_TYPES_H__ enum param_type { - TUNER_PARAM_TYPE_RADIO, \ - TUNER_PARAM_TYPE_PAL, \ - TUNER_PARAM_TYPE_SECAM, \ - TUNER_PARAM_TYPE_NTSC + TUNER_PARAM_TYPE_RADIO, + TUNER_PARAM_TYPE_PAL, + TUNER_PARAM_TYPE_SECAM, + TUNER_PARAM_TYPE_NTSC, + TUNER_PARAM_TYPE_DIGITAL, }; struct tuner_range { @@ -105,6 +106,7 @@ struct tuner_params { the SECAM-L/L' standards. Range: -16:+15 */ signed int default_top_secam_high:5; + u16 iffreq; unsigned int count; struct tuner_range *ranges; @@ -114,6 +116,13 @@ struct tunertype { char *name; unsigned int count; struct tuner_params *params; + + u16 min; + u16 max; + u32 stepsize; + + u8 *initdata; + u8 *sleepdata; }; extern struct tunertype tuners[]; diff --git a/include/media/tuner.h b/include/media/tuner.h index 1bf24a6..77068fc 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -78,7 +78,7 @@ #define TUNER_HITACHI_NTSC 40 #define TUNER_PHILIPS_PAL_MK 41 -#define TUNER_PHILIPS_ATSC 42 +#define TUNER_PHILIPS_FCV1236D 42 #define TUNER_PHILIPS_FM1236_MK3 43 #define TUNER_PHILIPS_4IN1 44 /* ATI TV Wonder Pro - Conexant */ diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 032bb75..0ea0bd8 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -153,6 +153,12 @@ enum { V4L2_IDENT_MSP4428G = 44287, V4L2_IDENT_MSP4448G = 44487, V4L2_IDENT_MSP4458G = 44587, + + /* Micron CMOS sensor chips: 45000-45099 */ + V4L2_IDENT_MT9M001C12ST = 45000, + V4L2_IDENT_MT9M001C12STM = 45005, + V4L2_IDENT_MT9V022IX7ATC = 45010, /* No way to detect "normal" I77ATx */ + V4L2_IDENT_MT9V022IX7ATM = 45015, /* and "lead free" IA7ATx chips */ }; #endif diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index f211445..a807d2f 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -318,6 +318,10 @@ struct video_device int (*vidioc_g_chip_ident) (struct file *file, void *fh, struct v4l2_chip_ident *chip); + /* For other private ioctls */ + int (*vidioc_default) (struct file *file, void *fh, + int cmd, void *arg); + #ifdef OBSOLETE_OWNER /* to be removed soon */ /* obsolete -- fops->owner is used instead */ diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 9903394..5b39a22 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -13,6 +13,9 @@ * the Free Software Foundation; either version 2 */ +#ifndef _VIDEOBUF_CORE_H +#define _VIDEOBUF_CORE_H + #include <linux/poll.h> #ifdef CONFIG_VIDEO_V4L1_COMPAT #include <linux/videodev.h> @@ -123,7 +126,8 @@ struct videobuf_queue_ops { struct videobuf_qtype_ops { u32 magic; - void* (*alloc) (size_t size); + void *(*alloc) (size_t size); + void *(*vmalloc) (struct videobuf_buffer *buf); int (*iolock) (struct videobuf_queue* q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf); @@ -151,7 +155,9 @@ struct videobuf_qtype_ops { struct videobuf_queue { struct mutex vb_lock; spinlock_t *irqlock; - void *dev; /* on pci, points to struct pci_dev */ + struct device *dev; + + wait_queue_head_t wait; /* wait if queue is empty */ enum v4l2_buf_type type; unsigned int inputs; /* for V4L2_BUF_FLAG_INPUT */ @@ -183,9 +189,13 @@ int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb, void *videobuf_alloc(struct videobuf_queue* q); +/* Used on videobuf-dvb */ +void *videobuf_queue_to_vmalloc (struct videobuf_queue* q, + struct videobuf_buffer *buf); + void videobuf_queue_core_init(struct videobuf_queue *q, struct videobuf_queue_ops *ops, - void *dev, + struct device *dev, spinlock_t *irqlock, enum v4l2_buf_type type, enum v4l2_field field, @@ -231,10 +241,4 @@ int videobuf_mmap_free(struct videobuf_queue *q); int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma); -/* --------------------------------------------------------------------- */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ +#endif diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 38105031..be8da26 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -1,5 +1,5 @@ /* - * helper functions for PCI DMA video4linux capture buffers + * helper functions for SG DMA video4linux capture buffers * * The functions expect the hardware being able to scatter gatter * (i.e. the buffers are not linear in physical memory, but fragmented @@ -68,9 +68,6 @@ struct videobuf_dmabuf { /* for kernel buffers */ void *vmalloc; - /* Stores the userspace pointer to vmalloc area */ - void *varea; - /* for overlay buffers (pci-pci dma) */ dma_addr_t bus_addr; @@ -81,7 +78,7 @@ struct videobuf_dmabuf { int direction; }; -struct videbuf_pci_sg_memory +struct videobuf_dma_sg_memory { u32 magic; @@ -103,11 +100,11 @@ int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma); int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma); struct videobuf_dmabuf *videobuf_to_dma (struct videobuf_buffer *buf); -void *videobuf_pci_alloc (size_t size); +void *videobuf_sg_alloc(size_t size); -void videobuf_queue_pci_init(struct videobuf_queue* q, +void videobuf_queue_sg_init(struct videobuf_queue* q, struct videobuf_queue_ops *ops, - void *dev, + struct device *dev, spinlock_t *irqlock, enum v4l2_buf_type type, enum v4l2_field field, @@ -117,6 +114,6 @@ void videobuf_queue_pci_init(struct videobuf_queue* q, /*FIXME: these variants are used only on *-alsa code, where videobuf is * used without queue */ -int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma); -int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma); +int videobuf_sg_dma_map(struct device *dev, struct videobuf_dmabuf *dma); +int videobuf_sg_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma); diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index 8233caf..b777486 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -27,7 +27,8 @@ struct videobuf_dvb { int videobuf_dvb_register(struct videobuf_dvb *dvb, struct module *module, void *adapter_priv, - struct device *device); + struct device *device, + short *adapter_nr); void videobuf_dvb_unregister(struct videobuf_dvb *dvb); /* diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h index ec63ab0..aed3946 100644 --- a/include/media/videobuf-vmalloc.h +++ b/include/media/videobuf-vmalloc.h @@ -12,6 +12,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 */ +#ifndef _VIDEOBUF_VMALLOC_H +#define _VIDEOBUF_VMALLOC_H #include <media/videobuf-core.h> @@ -39,3 +41,5 @@ void videobuf_queue_vmalloc_init(struct videobuf_queue* q, void *videobuf_to_vmalloc (struct videobuf_buffer *buf); void videobuf_vmalloc_free (struct videobuf_buffer *buf); + +#endif diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild index 4d46b3b..8eb018f 100644 --- a/include/mtd/Kbuild +++ b/include/mtd/Kbuild @@ -3,5 +3,4 @@ header-y += jffs2-user.h header-y += mtd-abi.h header-y += mtd-user.h header-y += nftl-user.h -header-y += ubi-header.h header-y += ubi-user.h diff --git a/include/mtd/ubi-header.h b/include/mtd/ubi-header.h deleted file mode 100644 index 292f916..0000000 --- a/include/mtd/ubi-header.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * Copyright (c) International Business Machines Corp., 2006 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Authors: Artem Bityutskiy (Битюцкий Артём) - * Thomas Gleixner - * Frank Haverkamp - * Oliver Lohmann - * Andreas Arnez - */ - -/* - * This file defines the layout of UBI headers and all the other UBI on-flash - * data structures. May be included by user-space. - */ - -#ifndef __UBI_HEADER_H__ -#define __UBI_HEADER_H__ - -#include <asm/byteorder.h> - -/* The version of UBI images supported by this implementation */ -#define UBI_VERSION 1 - -/* The highest erase counter value supported by this implementation */ -#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF - -/* The initial CRC32 value used when calculating CRC checksums */ -#define UBI_CRC32_INIT 0xFFFFFFFFU - -/* Erase counter header magic number (ASCII "UBI#") */ -#define UBI_EC_HDR_MAGIC 0x55424923 -/* Volume identifier header magic number (ASCII "UBI!") */ -#define UBI_VID_HDR_MAGIC 0x55424921 - -/* - * Volume type constants used in the volume identifier header. - * - * @UBI_VID_DYNAMIC: dynamic volume - * @UBI_VID_STATIC: static volume - */ -enum { - UBI_VID_DYNAMIC = 1, - UBI_VID_STATIC = 2 -}; - -/* - * Volume flags used in the volume table record. - * - * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume - * - * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume - * table. UBI automatically re-sizes the volume which has this flag and makes - * the volume to be of largest possible size. This means that if after the - * initialization UBI finds out that there are available physical eraseblocks - * present on the device, it automatically appends all of them to the volume - * (the physical eraseblocks reserved for bad eraseblocks handling and other - * reserved physical eraseblocks are not taken). So, if there is a volume with - * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical - * eraseblocks will be zero after UBI is loaded, because all of them will be - * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared - * after the volume had been initialized. - * - * The auto-resize feature is useful for device production purposes. For - * example, different NAND flash chips may have different amount of initial bad - * eraseblocks, depending of particular chip instance. Manufacturers of NAND - * chips usually guarantee that the amount of initial bad eraseblocks does not - * exceed certain percent, e.g. 2%. When one creates an UBI image which will be - * flashed to the end devices in production, he does not know the exact amount - * of good physical eraseblocks the NAND chip on the device will have, but this - * number is required to calculate the volume sized and put them to the volume - * table of the UBI image. In this case, one of the volumes (e.g., the one - * which will store the root file system) is marked as "auto-resizable", and - * UBI will adjust its size on the first boot if needed. - * - * Note, first UBI reserves some amount of physical eraseblocks for bad - * eraseblock handling, and then re-sizes the volume, not vice-versa. This - * means that the pool of reserved physical eraseblocks will always be present. - */ -enum { - UBI_VTBL_AUTORESIZE_FLG = 0x01, -}; - -/* - * Compatibility constants used by internal volumes. - * - * @UBI_COMPAT_DELETE: delete this internal volume before anything is written - * to the flash - * @UBI_COMPAT_RO: attach this device in read-only mode - * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its - * physical eraseblocks, don't allow the wear-leveling unit to move them - * @UBI_COMPAT_REJECT: reject this UBI image - */ -enum { - UBI_COMPAT_DELETE = 1, - UBI_COMPAT_RO = 2, - UBI_COMPAT_PRESERVE = 4, - UBI_COMPAT_REJECT = 5 -}; - -/* Sizes of UBI headers */ -#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr) -#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr) - -/* Sizes of UBI headers without the ending CRC */ -#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32)) -#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32)) - -/** - * struct ubi_ec_hdr - UBI erase counter header. - * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC) - * @version: version of UBI implementation which is supposed to accept this - * UBI image - * @padding1: reserved for future, zeroes - * @ec: the erase counter - * @vid_hdr_offset: where the VID header starts - * @data_offset: where the user data start - * @padding2: reserved for future, zeroes - * @hdr_crc: erase counter header CRC checksum - * - * The erase counter header takes 64 bytes and has a plenty of unused space for - * future usage. The unused fields are zeroed. The @version field is used to - * indicate the version of UBI implementation which is supposed to be able to - * work with this UBI image. If @version is greater then the current UBI - * version, the image is rejected. This may be useful in future if something - * is changed radically. This field is duplicated in the volume identifier - * header. - * - * The @vid_hdr_offset and @data_offset fields contain the offset of the the - * volume identifier header and user data, relative to the beginning of the - * physical eraseblock. These values have to be the same for all physical - * eraseblocks. - */ -struct ubi_ec_hdr { - __be32 magic; - __u8 version; - __u8 padding1[3]; - __be64 ec; /* Warning: the current limit is 31-bit anyway! */ - __be32 vid_hdr_offset; - __be32 data_offset; - __u8 padding2[36]; - __be32 hdr_crc; -} __attribute__ ((packed)); - -/** - * struct ubi_vid_hdr - on-flash UBI volume identifier header. - * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC) - * @version: UBI implementation version which is supposed to accept this UBI - * image (%UBI_VERSION) - * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC) - * @copy_flag: if this logical eraseblock was copied from another physical - * eraseblock (for wear-leveling reasons) - * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE, - * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT) - * @vol_id: ID of this volume - * @lnum: logical eraseblock number - * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be - * removed, kept only for not breaking older UBI users) - * @data_size: how many bytes of data this logical eraseblock contains - * @used_ebs: total number of used logical eraseblocks in this volume - * @data_pad: how many bytes at the end of this physical eraseblock are not - * used - * @data_crc: CRC checksum of the data stored in this logical eraseblock - * @padding1: reserved for future, zeroes - * @sqnum: sequence number - * @padding2: reserved for future, zeroes - * @hdr_crc: volume identifier header CRC checksum - * - * The @sqnum is the value of the global sequence counter at the time when this - * VID header was created. The global sequence counter is incremented each time - * UBI writes a new VID header to the flash, i.e. when it maps a logical - * eraseblock to a new physical eraseblock. The global sequence counter is an - * unsigned 64-bit integer and we assume it never overflows. The @sqnum - * (sequence number) is used to distinguish between older and newer versions of - * logical eraseblocks. - * - * There are 2 situations when there may be more then one physical eraseblock - * corresponding to the same logical eraseblock, i.e., having the same @vol_id - * and @lnum values in the volume identifier header. Suppose we have a logical - * eraseblock L and it is mapped to the physical eraseblock P. - * - * 1. Because UBI may erase physical eraseblocks asynchronously, the following - * situation is possible: L is asynchronously erased, so P is scheduled for - * erasure, then L is written to,i.e. mapped to another physical eraseblock P1, - * so P1 is written to, then an unclean reboot happens. Result - there are 2 - * physical eraseblocks P and P1 corresponding to the same logical eraseblock - * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the - * flash. - * - * 2. From time to time UBI moves logical eraseblocks to other physical - * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P - * to P1, and an unclean reboot happens before P is physically erased, there - * are two physical eraseblocks P and P1 corresponding to L and UBI has to - * select one of them when the flash is attached. The @sqnum field says which - * PEB is the original (obviously P will have lower @sqnum) and the copy. But - * it is not enough to select the physical eraseblock with the higher sequence - * number, because the unclean reboot could have happen in the middle of the - * copying process, so the data in P is corrupted. It is also not enough to - * just select the physical eraseblock with lower sequence number, because the - * data there may be old (consider a case if more data was added to P1 after - * the copying). Moreover, the unclean reboot may happen when the erasure of P - * was just started, so it result in unstable P, which is "mostly" OK, but - * still has unstable bits. - * - * UBI uses the @copy_flag field to indicate that this logical eraseblock is a - * copy. UBI also calculates data CRC when the data is moved and stores it at - * the @data_crc field of the copy (P1). So when UBI needs to pick one physical - * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is - * examined. If it is cleared, the situation* is simple and the newer one is - * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC - * checksum is correct, this physical eraseblock is selected (P1). Otherwise - * the older one (P) is selected. - * - * Note, there is an obsolete @leb_ver field which was used instead of @sqnum - * in the past. But it is not used anymore and we keep it in order to be able - * to deal with old UBI images. It will be removed at some point. - * - * There are 2 sorts of volumes in UBI: user volumes and internal volumes. - * Internal volumes are not seen from outside and are used for various internal - * UBI purposes. In this implementation there is only one internal volume - the - * layout volume. Internal volumes are the main mechanism of UBI extensions. - * For example, in future one may introduce a journal internal volume. Internal - * volumes have their own reserved range of IDs. - * - * The @compat field is only used for internal volumes and contains the "degree - * of their compatibility". It is always zero for user volumes. This field - * provides a mechanism to introduce UBI extensions and to be still compatible - * with older UBI binaries. For example, if someone introduced a journal in - * future, he would probably use %UBI_COMPAT_DELETE compatibility for the - * journal volume. And in this case, older UBI binaries, which know nothing - * about the journal volume, would just delete this volume and work perfectly - * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image - * - it just ignores the Ext3fs journal. - * - * The @data_crc field contains the CRC checksum of the contents of the logical - * eraseblock if this is a static volume. In case of dynamic volumes, it does - * not contain the CRC checksum as a rule. The only exception is when the - * data of the physical eraseblock was moved by the wear-leveling unit, then - * the wear-leveling unit calculates the data CRC and stores it in the - * @data_crc field. And of course, the @copy_flag is %in this case. - * - * The @data_size field is used only for static volumes because UBI has to know - * how many bytes of data are stored in this eraseblock. For dynamic volumes, - * this field usually contains zero. The only exception is when the data of the - * physical eraseblock was moved to another physical eraseblock for - * wear-leveling reasons. In this case, UBI calculates CRC checksum of the - * contents and uses both @data_crc and @data_size fields. In this case, the - * @data_size field contains data size. - * - * The @used_ebs field is used only for static volumes and indicates how many - * eraseblocks the data of the volume takes. For dynamic volumes this field is - * not used and always contains zero. - * - * The @data_pad is calculated when volumes are created using the alignment - * parameter. So, effectively, the @data_pad field reduces the size of logical - * eraseblocks of this volume. This is very handy when one uses block-oriented - * software (say, cramfs) on top of the UBI volume. - */ -struct ubi_vid_hdr { - __be32 magic; - __u8 version; - __u8 vol_type; - __u8 copy_flag; - __u8 compat; - __be32 vol_id; - __be32 lnum; - __be32 leb_ver; /* obsolete, to be removed, don't use */ - __be32 data_size; - __be32 used_ebs; - __be32 data_pad; - __be32 data_crc; - __u8 padding1[4]; - __be64 sqnum; - __u8 padding2[12]; - __be32 hdr_crc; -} __attribute__ ((packed)); - -/* Internal UBI volumes count */ -#define UBI_INT_VOL_COUNT 1 - -/* - * Starting ID of internal volumes. There is reserved room for 4096 internal - * volumes. - */ -#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096) - -/* The layout volume contains the volume table */ - -#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START -#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC -#define UBI_LAYOUT_VOLUME_ALIGN 1 -#define UBI_LAYOUT_VOLUME_EBS 2 -#define UBI_LAYOUT_VOLUME_NAME "layout volume" -#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT - -/* The maximum number of volumes per one UBI device */ -#define UBI_MAX_VOLUMES 128 - -/* The maximum volume name length */ -#define UBI_VOL_NAME_MAX 127 - -/* Size of the volume table record */ -#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record) - -/* Size of the volume table record without the ending CRC */ -#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32)) - -/** - * struct ubi_vtbl_record - a record in the volume table. - * @reserved_pebs: how many physical eraseblocks are reserved for this volume - * @alignment: volume alignment - * @data_pad: how many bytes are unused at the end of the each physical - * eraseblock to satisfy the requested alignment - * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) - * @upd_marker: if volume update was started but not finished - * @name_len: volume name length - * @name: the volume name - * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG) - * @padding: reserved, zeroes - * @crc: a CRC32 checksum of the record - * - * The volume table records are stored in the volume table, which is stored in - * the layout volume. The layout volume consists of 2 logical eraseblock, each - * of which contains a copy of the volume table (i.e., the volume table is - * duplicated). The volume table is an array of &struct ubi_vtbl_record - * objects indexed by the volume ID. - * - * If the size of the logical eraseblock is large enough to fit - * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES - * records. Otherwise, it contains as many records as it can fit (i.e., size of - * logical eraseblock divided by sizeof(struct ubi_vtbl_record)). - * - * The @upd_marker flag is used to implement volume update. It is set to %1 - * before update and set to %0 after the update. So if the update operation was - * interrupted, UBI knows that the volume is corrupted. - * - * The @alignment field is specified when the volume is created and cannot be - * later changed. It may be useful, for example, when a block-oriented file - * system works on top of UBI. The @data_pad field is calculated using the - * logical eraseblock size and @alignment. The alignment must be multiple to the - * minimal flash I/O unit. If @alignment is 1, all the available space of - * the physical eraseblocks is used. - * - * Empty records contain all zeroes and the CRC checksum of those zeroes. - */ -struct ubi_vtbl_record { - __be32 reserved_pebs; - __be32 alignment; - __be32 data_pad; - __u8 vol_type; - __u8 upd_marker; - __be16 name_len; - __u8 name[UBI_VOL_NAME_MAX+1]; - __u8 flags; - __u8 padding[23]; - __be32 crc; -} __attribute__ ((packed)); - -#endif /* !__UBI_HEADER_H__ */ diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 49c4898..e0a612b 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -383,6 +383,15 @@ static inline int ipv6_addr_orchid(const struct in6_addr *a) == htonl(0x20010010)); } +static inline void ipv6_addr_set_v4mapped(const __be32 addr, + struct in6_addr *v4mapped) +{ + ipv6_addr_set(v4mapped, + 0, 0, + htonl(0x0000FFFF), + addr); +} + /* * find the first different bit between two addresses * length of address must be a multiple of 32bits diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 95bf4ba..2dcbecc 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -1051,7 +1051,7 @@ struct ib_device { struct ib_dma_mapping_ops *dma_ops; struct module *owner; - struct class_device class_dev; + struct device dev; struct kobject *ports_parent; struct list_head port_list; diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 98724ba..e78d3b6 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -32,7 +32,6 @@ #include <scsi/sas.h> #include <linux/libata.h> #include <linux/list.h> -#include <asm/semaphore.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_transport_sas.h> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index ab7acbe..b8b19e2 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -156,8 +156,8 @@ struct scsi_device { int timeout; - struct device sdev_gendev; - struct class_device sdev_classdev; + struct device sdev_gendev, + sdev_dev; struct execute_work ew; /* used to get process context on put */ @@ -167,9 +167,9 @@ struct scsi_device { #define to_scsi_device(d) \ container_of(d, struct scsi_device, sdev_gendev) #define class_to_sdev(d) \ - container_of(d, struct scsi_device, sdev_classdev) + container_of(d, struct scsi_device, sdev_dev) #define transport_class_to_sdev(class_dev) \ - to_scsi_device(class_dev->dev) + to_scsi_device(class_dev->parent) #define sdev_printk(prefix, sdev, fmt, a...) \ dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a) @@ -220,7 +220,7 @@ static inline struct scsi_target *scsi_target(struct scsi_device *sdev) return to_scsi_target(sdev->sdev_gendev.parent); } #define transport_class_to_starget(class_dev) \ - to_scsi_target(class_dev->dev) + to_scsi_target(class_dev->parent) #define starget_printk(prefix, starget, fmt, a...) \ dev_printk(prefix, &(starget)->dev, fmt, ##a) diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 4913286..d967d6d 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -470,7 +470,7 @@ struct scsi_host_template { /* * Pointer to the sysfs class properties for this host, NULL terminated. */ - struct class_device_attribute **shost_attrs; + struct device_attribute **shost_attrs; /* * Pointer to the SCSI device properties for this host, NULL terminated. @@ -655,8 +655,7 @@ struct Scsi_Host { enum scsi_host_state shost_state; /* ldm bits */ - struct device shost_gendev; - struct class_device shost_classdev; + struct device shost_gendev, shost_dev; /* * List of hosts per template. @@ -683,7 +682,7 @@ struct Scsi_Host { }; #define class_to_shost(d) \ - container_of(d, struct Scsi_Host, shost_classdev) + container_of(d, struct Scsi_Host, shost_dev) #define shost_printk(prefix, shost, fmt, a...) \ dev_printk(prefix, &(shost)->shost_gendev, fmt, ##a) diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h index 0dfef75..490bd13 100644 --- a/include/scsi/scsi_transport.h +++ b/include/scsi/scsi_transport.h @@ -80,7 +80,7 @@ struct scsi_transport_template { }; #define transport_class_to_shost(tc) \ - dev_to_shost((tc)->dev) + dev_to_shost((tc)->parent) /* Private area maintenance. The driver requested allocations come diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 4769efd..06f72ba 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -163,8 +163,8 @@ enum fc_tgtid_binding_type { /* Macro for use in defining Virtual Port attributes */ -#define FC_VPORT_ATTR(_name,_mode,_show,_store) \ -struct class_device_attribute class_device_attr_vport_##_name = \ +#define FC_VPORT_ATTR(_name,_mode,_show,_store) \ +struct device_attribute dev_attr_vport_##_name = \ __ATTR(_name,_mode,_show,_store) @@ -234,8 +234,8 @@ struct fc_vport { #define dev_to_vport(d) \ container_of(d, struct fc_vport, dev) -#define transport_class_to_vport(classdev) \ - dev_to_vport(classdev->dev) +#define transport_class_to_vport(dev) \ + dev_to_vport(dev->parent) #define vport_to_shost(v) \ (v->shost) #define vport_to_shost_channel(v) \ @@ -271,7 +271,7 @@ struct fc_rport_identifiers { /* Macro for use in defining Remote Port attributes */ #define FC_RPORT_ATTR(_name,_mode,_show,_store) \ -struct class_device_attribute class_device_attr_rport_##_name = \ +struct device_attribute dev_attr_rport_##_name = \ __ATTR(_name,_mode,_show,_store) @@ -341,8 +341,8 @@ struct fc_rport { /* aka fc_starget_attrs */ #define dev_to_rport(d) \ container_of(d, struct fc_rport, dev) -#define transport_class_to_rport(classdev) \ - dev_to_rport(classdev->dev) +#define transport_class_to_rport(dev) \ + dev_to_rport(dev->parent) #define rport_to_shost(r) \ dev_to_shost(r->dev.parent) diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 09125fa..61ad359 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -80,8 +80,8 @@ struct sas_phy { #define dev_to_phy(d) \ container_of((d), struct sas_phy, dev) -#define transport_class_to_phy(cdev) \ - dev_to_phy((cdev)->dev) +#define transport_class_to_phy(dev) \ + dev_to_phy((dev)->parent) #define phy_to_shost(phy) \ dev_to_shost((phy)->dev.parent) @@ -96,8 +96,8 @@ struct sas_rphy { #define dev_to_rphy(d) \ container_of((d), struct sas_rphy, dev) -#define transport_class_to_rphy(cdev) \ - dev_to_rphy((cdev)->dev) +#define transport_class_to_rphy(dev) \ + dev_to_rphy((dev)->parent) #define rphy_to_shost(rphy) \ dev_to_shost((rphy)->dev.parent) #define target_to_rphy(targ) \ @@ -152,8 +152,8 @@ struct sas_port { #define dev_to_sas_port(d) \ container_of((d), struct sas_port, dev) -#define transport_class_to_sas_port(cdev) \ - dev_to_sas_port((cdev)->dev) +#define transport_class_to_sas_port(dev) \ + dev_to_sas_port((dev)->parent) struct sas_phy_linkrates { enum sas_linkrate maximum_linkrate; diff --git a/include/scsi/sd.h b/include/scsi/sd.h index 8ea9f73..4f032d4 100644 --- a/include/scsi/sd.h +++ b/include/scsi/sd.h @@ -34,7 +34,7 @@ struct scsi_disk { struct scsi_driver *driver; /* always &sd_template */ struct scsi_device *device; - struct class_device cdev; + struct device dev; struct gendisk *disk; unsigned int openers; /* protected by BKL for now, yuck */ sector_t capacity; /* size in 512-byte sectors */ @@ -46,7 +46,7 @@ struct scsi_disk { unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ }; -#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev) +#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) #define sd_printk(prefix, sdsk, fmt, a...) \ (sdsk)->disk ? \ diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 0148058..049edc5 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -397,6 +397,7 @@ #define AC97_HAS_NO_TONE (1<<16) /* no Tone volume */ #define AC97_HAS_NO_STD_PCM (1<<17) /* no standard AC97 PCM volume and mute */ #define AC97_HAS_NO_AUX (1<<18) /* no standard AC97 AUX volume and mute */ +#define AC97_HAS_8CH (1<<19) /* supports 8-channel output */ /* rates indexes */ #define AC97_RATES_FRONT_DAC 0 diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h index 4e80d3f..d293d36 100644 --- a/include/sound/ak4114.h +++ b/include/sound/ak4114.h @@ -182,6 +182,7 @@ struct ak4114 { unsigned char rcs0; unsigned char rcs1; struct delayed_work work; + unsigned int check_flags; void *change_callback_private; void (*change_callback)(struct ak4114 *ak4114, unsigned char c0, unsigned char c1); }; diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h index 6153b91..891cf1a 100644 --- a/include/sound/ak4xxx-adda.h +++ b/include/sound/ak4xxx-adda.h @@ -68,7 +68,7 @@ struct snd_akm4xxx { enum { SND_AK4524, SND_AK4528, SND_AK4529, SND_AK4355, SND_AK4358, SND_AK4381, - SND_AK5365, NON_AKM + SND_AK5365 } type; /* (array) information of combined codecs */ diff --git a/include/sound/asoundef.h b/include/sound/asoundef.h index 024ce62..a6e0fac 100644 --- a/include/sound/asoundef.h +++ b/include/sound/asoundef.h @@ -112,6 +112,14 @@ #define IEC958_AES3_CON_CLOCK_1000PPM (0<<4) /* 1000 ppm */ #define IEC958_AES3_CON_CLOCK_50PPM (1<<4) /* 50 ppm */ #define IEC958_AES3_CON_CLOCK_VARIABLE (2<<4) /* variable pitch */ +#define IEC958_AES4_CON_MAX_WORDLEN_24 (1<<0) /* 0 = 20-bit, 1 = 24-bit */ +#define IEC958_AES4_CON_WORDLEN (7<<1) /* mask - sample word length */ +#define IEC958_AES4_CON_WORDLEN_NOTID (0<<1) /* not indicated */ +#define IEC958_AES4_CON_WORDLEN_20_16 (1<<1) /* 20-bit or 16-bit */ +#define IEC958_AES4_CON_WORDLEN_22_18 (2<<1) /* 22-bit or 18-bit */ +#define IEC958_AES4_CON_WORDLEN_23_19 (4<<1) /* 23-bit or 19-bit */ +#define IEC958_AES4_CON_WORDLEN_24_20 (5<<1) /* 24-bit or 20-bit */ +#define IEC958_AES4_CON_WORDLEN_21_17 (6<<1) /* 21-bit or 17-bit */ /***************************************************************************** * * diff --git a/include/sound/control.h b/include/sound/control.h index e79baa6..3dc1291 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -169,4 +169,11 @@ int snd_ctl_boolean_mono_info(struct snd_kcontrol *kcontrol, int snd_ctl_boolean_stereo_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); +/* + * virtual master control + */ +struct snd_kcontrol *snd_ctl_make_virtual_master(char *name, + const unsigned int *tlv); +int snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave); + #endif /* __SOUND_CONTROL_H */ diff --git a/include/sound/core.h b/include/sound/core.h index 4fc0235..695ee53 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -277,8 +277,8 @@ int snd_minor_info_done(void); int snd_minor_info_oss_init(void); int snd_minor_info_oss_done(void); #else -#define snd_minor_info_oss_init() /*NOP*/ -#define snd_minor_info_oss_done() /*NOP*/ +static inline int snd_minor_info_oss_init(void) { return 0; } +static inline int snd_minor_info_oss_done(void) { return 0; } #endif /* memory.c */ @@ -310,7 +310,7 @@ int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); #ifndef snd_card_set_dev -#define snd_card_set_dev(card,devptr) ((card)->dev = (devptr)) +#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr)) #endif /* device.c */ @@ -373,7 +373,7 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) * snd_printd - debug printk * @fmt: format string * - * Compiled only when Works like snd_printk() for debugging purpose. + * Works like snd_printk() for debugging purposes. * Ignored when CONFIG_SND_DEBUG is not set. */ #define snd_printd(fmt, args...) \ @@ -417,7 +417,7 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) * snd_printdd - debug printk * @format: format string * - * Compiled only when Works like snd_printk() for debugging purpose. + * Works like snd_printk() for debugging purposes. * Ignored when CONFIG_SND_DEBUG_DETECT is not set. */ #define snd_printdd(format, args...) snd_printk(format, ##args) diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h index d45218b..68b634b 100644 --- a/include/sound/mpu401.h +++ b/include/sound/mpu401.h @@ -103,6 +103,21 @@ struct snd_mpu401 { #define MPU401D(mpu) (mpu)->port /* + * control register bits + */ +/* read MPU401C() */ +#define MPU401_RX_EMPTY 0x80 +#define MPU401_TX_FULL 0x40 + +/* write MPU401C() */ +#define MPU401_RESET 0xff +#define MPU401_ENTER_UART 0x3f + +/* read MPU401D() */ +#define MPU401_ACK 0xfe + + +/* */ diff --git a/include/sound/version.h b/include/sound/version.h index fac66c4..ed6fb2e 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ -#define CONFIG_SND_VERSION "1.0.16rc2" -#define CONFIG_SND_DATE " (Thu Jan 31 16:40:16 2008 UTC)" +#define CONFIG_SND_VERSION "1.0.16" +#define CONFIG_SND_DATE "" |
