diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/bcma/bcma.h | 7 | ||||
| -rw-r--r-- | include/linux/ieee80211.h | 52 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 156 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 94 | ||||
| -rw-r--r-- | include/net/mac80211.h | 29 |
5 files changed, 238 insertions, 100 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8deaf6d..12334f9 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -70,6 +70,13 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 +#define BCMA_CORE_4706_SOC_RAM 0x50E +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ +#define BCMA_CORE_4706_MAC_GBIT_COMMON 0x5DC +#define BCMA_CORE_DDR23_PHY 0x5DD #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af89..318fc1f 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -568,6 +568,26 @@ struct ieee80211s_hdr { #define MESH_FLAGS_PS_DEEP 0x4 /** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + +/** * struct ieee80211_quiet_ie * * This structure refers to "Quiet information element" @@ -1443,7 +1463,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1475,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,13 +1487,35 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, IEEE80211_PATH_METRIC_VENDOR = 255, }; +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; /* * IEEE 802.11-2007 7.3.2.9 Country information element @@ -1589,6 +1631,10 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_MICROSOFT 0x0050f2 +#define WLAN_OUI_TYPE_MICROSOFT_WPA 1 +#define WLAN_OUI_TYPE_MICROSOFT_WMM 2 +#define WLAN_OUI_TYPE_MICROSOFT_WPS 4 /* * WMM/802.11e Tspec Element diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 970afdf..c0fc5d2 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -277,6 +277,12 @@ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -456,6 +462,10 @@ * the frame. * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command * is used to configure connection quality monitoring notification trigger * levels. @@ -771,6 +781,13 @@ enum nl80211_commands { * section 7.3.2.25.1, e.g. 0x000FAC04) * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used * * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing @@ -1006,6 +1023,8 @@ enum nl80211_commands { * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was * acknowledged by the recipient. * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * * @NL80211_ATTR_CQM: connection quality monitor configuration in a * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. * @@ -1063,7 +1082,7 @@ enum nl80211_commands { * flag isn't set, the frame will be rejected. This is also used as an * nl80211 capability flag. * - * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) * * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags * attributes, specifying what a key should be set as default as. @@ -1087,10 +1106,10 @@ enum nl80211_commands { * indicate which WoW triggers should be enabled. This is also * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN * triggers. - + * * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. - + * * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more * sets of attributes to match during scheduled scans. Only BSSs * that match any of the sets will be reported. These are @@ -1117,7 +1136,7 @@ enum nl80211_commands { * are managed in software: interfaces of these types aren't subject to * any restrictions in their number or combinations. * - * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. * * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, @@ -1184,7 +1203,6 @@ enum nl80211_commands { * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from * &enum nl80211_feature_flags and is advertised in wiphy information. * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * * requests while operating in AP-mode. * This attribute holds a bitmap of the supported protocols for * offloading (see &enum nl80211_probe_resp_offload_support_attr). @@ -1524,6 +1542,9 @@ enum nl80211_attrs { #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1956,6 +1977,8 @@ enum nl80211_reg_rule_attr { * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -1963,7 +1986,8 @@ enum nl80211_reg_rule_attr { enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -1971,6 +1995,9 @@ enum nl80211_sched_scan_match_attr { __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 }; +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + /** * enum nl80211_reg_rule_flags - regulatory rule flags * @@ -2090,78 +2117,91 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2188,6 +2228,9 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_RSSI_THRESHOLD, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2203,34 +2246,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ @@ -2500,6 +2545,11 @@ enum nl80211_band { NL80211_BAND_5GHZ, }; +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ enum nl80211_ps_state { NL80211_PS_DISABLED, NL80211_PS_ENABLED, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7319f25..061c019 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -627,10 +627,10 @@ struct sta_bss_parameters { * @llid: mesh local link id * @plid: mesh peer link id * @plink_state: mesh peer link state - * @signal: the signal strength, type depends on the wiphy's signal_type - NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. - * @signal_avg: avg signal strength, type depends on the wiphy's signal_type - NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal: The signal strength, type depends on the wiphy's signal_type. + * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. + * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station @@ -790,43 +790,95 @@ struct bss_parameters { int ht_opmode; }; -/* +/** * struct mesh_config - 802.11s mesh configuration * * These parameters can be changed while the mesh is active. + * + * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used + * by the Mesh Peering Open message + * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units + * used by the Mesh Peering Open message + * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by + * the mesh peering management to close a mesh peering + * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this + * mesh interface + * @dot11MeshMaxRetries: the maximum number of peer link open retries that can + * be sent to establish a new peer link instance in a mesh + * @dot11MeshTTL: the value of TTL field set at a source mesh STA + * @element_ttl: the value of TTL field set at a mesh STA for path selection + * elements + * @auto_open_plinks: whether we should automatically open peer links when we + * detect compatible mesh peers + * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to + * synchronize to for 11s default synchronization method + * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ + * that an originator mesh STA can send to a particular path target + * @path_refresh_time: how frequently to refresh mesh paths in milliseconds + * @min_discovery_timeout: the minimum length of time to wait until giving up on + * a path discovery in milliseconds + * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs + * receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during + * which a mesh STA can send only one action frame containing a PREQ + * element + * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during + * which a mesh STA can send only one Action frame containing a PERR + * element + * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that + * it takes for an HWMP information element to propagate across the mesh + * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA + * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root + * announcements are transmitted + * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh + * station has access to a broader network beyond the MBSS. (This is + * missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true + * only means that the station will announce others it's a mesh gate, but + * not necessarily using the gate announcement protocol. Still keeping the + * same nomenclature to be in sync with the spec) + * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding + * entity (default is TRUE - forwarding entity) + * @rssi_threshold: the threshold for average signal strength of candidate + * station to establish a peer link + * @ht_opmode: mesh HT protection mode + * + * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs + * receiving a proactive PREQ shall consider the forwarding information to + * the root mesh STA to be valid. + * + * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive + * PREQs are transmitted. + * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) + * during which a mesh STA can send only one Action frame containing + * a PREQ element for root path confirmation. */ struct mesh_config { - /* Timeouts in ms */ - /* Mesh plink management parameters */ u16 dot11MeshRetryTimeout; u16 dot11MeshConfirmTimeout; u16 dot11MeshHoldingTimeout; u16 dot11MeshMaxPeerLinks; - u8 dot11MeshMaxRetries; - u8 dot11MeshTTL; - /* ttl used in path selection information elements */ - u8 element_ttl; + u8 dot11MeshMaxRetries; + u8 dot11MeshTTL; + u8 element_ttl; bool auto_open_plinks; - /* neighbor offset synchronization */ u32 dot11MeshNbrOffsetMaxNeighbor; - /* HWMP parameters */ - u8 dot11MeshHWMPmaxPREQretries; + u8 dot11MeshHWMPmaxPREQretries; u32 path_refresh_time; u16 min_discovery_timeout; u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPperrMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; - u8 dot11MeshHWMPRootMode; + u8 dot11MeshHWMPRootMode; u16 dot11MeshHWMPRannInterval; - /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol - * set to true only means that the station will announce others it's a - * mesh gate, but not necessarily using the gate announcement protocol. - * Still keeping the same nomenclature to be in sync with the spec. */ - bool dot11MeshGateAnnouncementProtocol; + bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; s32 rssi_threshold; u16 ht_opmode; + u32 dot11MeshHWMPactivePathToRootTimeout; + u16 dot11MeshHWMProotInterval; + u16 dot11MeshHWMPconfirmationInterval; }; /** @@ -975,6 +1027,7 @@ struct cfg80211_match_set { * @wiphy: the wiphy this was for * @dev: the interface * @channels: channels to scan + * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ struct cfg80211_sched_scan_request { struct cfg80211_ssid *ssids; @@ -985,6 +1038,7 @@ struct cfg80211_sched_scan_request { size_t ie_len; struct cfg80211_match_set *match_sets; int n_match_sets; + s32 rssi_thold; /* internal */ struct wiphy *wiphy; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 6914f99..670a58b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2254,6 +2254,9 @@ enum ieee80211_rate_control_changed { * @get_et_strings: Ethtool API to get a set of strings to describe stats * and perhaps other supported types of ethtool data-sets. * + * @get_rssi: Get current signal strength in dBm, the function is optional + * and can sleep. + * */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -2393,6 +2396,8 @@ struct ieee80211_ops { void (*get_et_strings)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 sset, u8 *data); + int (*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta, s8 *rssi_dbm); }; /** @@ -3843,28 +3848,4 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif, */ int ieee80211_ave_rssi(struct ieee80211_vif *vif); -/* Extra debugging macros */ - -#ifdef CONFIG_MAC80211_HT_DEBUG -#define ht_vdbg(fmt, ...) \ - pr_debug(fmt, ##__VA_ARGS__) -#else -#define ht_vdbg(fmt, ...) \ -do { \ - if (0) \ - pr_debug(fmt, ##__VA_ARGS__); \ -} while (0) -#endif - -#ifdef CONFIG_MAC80211_IBSS_DEBUG -#define ibss_vdbg(fmt, ...) \ - pr_debug(fmt, ##__VA_ARGS__) -#else -#define ibss_vdbg(fmt, ...) \ -do { \ - if (0) \ - pr_debug(fmt, ##__VA_ARGS__); \ -} while (0) -#endif - #endif /* MAC80211_H */ |
