diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/pinctrl/mt7623-pinfunc.h | 30 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 3 |
2 files changed, 29 insertions, 4 deletions
diff --git a/include/dt-bindings/pinctrl/mt7623-pinfunc.h b/include/dt-bindings/pinctrl/mt7623-pinfunc.h index 2f00bdc..436a87b 100644 --- a/include/dt-bindings/pinctrl/mt7623-pinfunc.h +++ b/include/dt-bindings/pinctrl/mt7623-pinfunc.h @@ -185,6 +185,12 @@ #define MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO (MTK_PIN_NO(56) | 1) #define MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MI (MTK_PIN_NO(56) | 2) +#define MT7623_PIN_57_SDA1_FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT7623_PIN_57_SDA1_FUNC_SDA1 (MTK_PIN_NO(57) | 1) + +#define MT7623_PIN_58_SCL1_FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT7623_PIN_58_SCL1_FUNC_SCL1 (MTK_PIN_NO(58) | 1) + #define MT7623_PIN_60_WB_RSTB_FUNC_GPIO60 (MTK_PIN_NO(60) | 0) #define MT7623_PIN_60_WB_RSTB_FUNC_WB_RSTB (MTK_PIN_NO(60) | 1) @@ -244,6 +250,22 @@ #define MT7623_PIN_76_SCL0_FUNC_GPIO76 (MTK_PIN_NO(76) | 0) #define MT7623_PIN_76_SCL0_FUNC_SCL0 (MTK_PIN_NO(76) | 1) +#define MT7623_PIN_79_URXD0_FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT7623_PIN_79_URXD0_FUNC_URXD0 (MTK_PIN_NO(79) | 1) +#define MT7623_PIN_79_URXD0_FUNC_UTXD0 (MTK_PIN_NO(79) | 2) + +#define MT7623_PIN_80_UTXD0_FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT7623_PIN_80_UTXD0_FUNC_UTXD0 (MTK_PIN_NO(80) | 1) +#define MT7623_PIN_80_UTXD0_FUNC_URXD0 (MTK_PIN_NO(80) | 2) + +#define MT7623_PIN_81_URXD1_FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT7623_PIN_81_URXD1_FUNC_URXD1 (MTK_PIN_NO(81) | 1) +#define MT7623_PIN_81_URXD1_FUNC_UTXD1 (MTK_PIN_NO(81) | 2) + +#define MT7623_PIN_82_UTXD1_FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT7623_PIN_82_UTXD1_FUNC_UTXD1 (MTK_PIN_NO(82) | 1) +#define MT7623_PIN_82_UTXD1_FUNC_URXD1 (MTK_PIN_NO(82) | 2) + #define MT7623_PIN_83_LCM_RST_FUNC_GPIO83 (MTK_PIN_NO(83) | 0) #define MT7623_PIN_83_LCM_RST_FUNC_LCM_RST (MTK_PIN_NO(83) | 1) @@ -351,10 +373,10 @@ #define MT7623_PIN_122_GPIO122_FUNC_SDA2 (MTK_PIN_NO(122) | 4) #define MT7623_PIN_122_GPIO122_FUNC_URXD0 (MTK_PIN_NO(122) | 5) -#define MT7623_PIN_123_GPIO123_FUNC_GPIO123 (MTK_PIN_NO(123) | 0) -#define MT7623_PIN_123_GPIO123_FUNC_TEST (MTK_PIN_NO(123) | 1) -#define MT7623_PIN_123_GPIO123_FUNC_SCL2 (MTK_PIN_NO(123) | 4) -#define MT7623_PIN_123_GPIO123_FUNC_UTXD0 (MTK_PIN_NO(123) | 5) +#define MT7623_PIN_123_HTPLG_FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT7623_PIN_123_HTPLG_FUNC_HTPLG (MTK_PIN_NO(123) | 1) +#define MT7623_PIN_123_HTPLG_FUNC_SCL2 (MTK_PIN_NO(123) | 4) +#define MT7623_PIN_123_HTPLG_FUNC_UTXD0 (MTK_PIN_NO(123) | 5) #define MT7623_PIN_124_GPIO124_FUNC_GPIO124 (MTK_PIN_NO(124) | 0) #define MT7623_PIN_124_GPIO124_FUNC_TEST (MTK_PIN_NO(124) | 1) diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 7620eb1..279e3c5 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -42,6 +42,8 @@ * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high * impedance to VDD). If the argument is != 0 pull-up is enabled, * if it is 0, pull-up is total, i.e. the pin is connected to VDD. + * @PIN_CONFIG_BIDIRECTIONAL: the pin will be configured to allow simultaneous + * input and output operations. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports * which are then pulled up with an external resistor. Setting this @@ -96,6 +98,7 @@ enum pin_config_param { PIN_CONFIG_BIAS_PULL_DOWN, PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIDIRECTIONAL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, PIN_CONFIG_DRIVE_PUSH_PULL, |
