diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 129 |
1 files changed, 113 insertions, 16 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 15daf5e..27e4e44 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,6 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -203,7 +204,8 @@ * FILS shared key authentication offload should be able to construct the * authentication and association frames for FILS shared key authentication and * eventually do a key derivation as per IEEE 802.11ai. The below additional - * parameters should be given to driver in %NL80211_CMD_CONNECT. + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message @@ -214,7 +216,8 @@ * as specified in IETF RFC 6696. * * When FILS shared key authentication is completed, driver needs to provide the - * below additional parameters to userspace. + * below additional parameters to userspace, which can be either after setting + * up a connection or after roaming. * %NL80211_ATTR_FILS_KEK - used for key renewal * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated @@ -978,18 +981,18 @@ * only the %NL80211_ATTR_IE data is used and updated with this command. * * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 - * for the given authenticator address (specified with &NL80211_ATTR_MAC). - * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the + * for the given authenticator address (specified with %NL80211_ATTR_MAC). + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the * PMK-R0, otherwise it specifies the PMK. * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously * configured PMK for the authenticator address identified by - * &NL80211_ATTR_MAC. + * %NL80211_ATTR_MAC. * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way * handshake was completed successfully by the driver. The BSSID is - * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake + * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake * offload should send this event after indicating 802.11 association with - * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed - * &NL80211_CMD_DISCONNECT should be indicated instead. + * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed + * %NL80211_CMD_DISCONNECT should be indicated instead. * * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request * and RX notification. This command is used both as a request to transmit @@ -1026,9 +1029,9 @@ * initiated the connection through the connect request. * * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's - * ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE, - * &NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its - * address(specified in &NL80211_ATTR_MAC). + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its + * address(specified in %NL80211_ATTR_MAC). * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use @@ -2215,7 +2218,7 @@ enum nl80211_commands { * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external * authentication operation (u32 attribute with an * &enum nl80211_external_auth_action value). This is used with the - * &NL80211_CMD_EXTERNAL_AUTH request event. + * %NL80211_CMD_EXTERNAL_AUTH request event. * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user * space supports external authentication. This attribute shall be used * only with %NL80211_CMD_CONNECT request. The driver may offload @@ -2225,6 +2228,16 @@ enum nl80211_commands { * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. * + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum + * nl80211_txq_stats) + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. + * The smaller of this and the memory limit is enforced. + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the + * TXQ queues for this phy. The smaller of this and the packet limit is + * enforced. + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes + * a flow is assigned on each round of the DRR scheduler. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2659,6 +2672,11 @@ enum nl80211_attrs { NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + NL80211_ATTR_TXQ_STATS, + NL80211_ATTR_TXQ_LIMIT, + NL80211_ATTR_TXQ_MEMORY_LIMIT, + NL80211_ATTR_TXQ_QUANTUM, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2698,6 +2716,8 @@ enum nl80211_attrs { #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS +#define NL80211_WIPHY_NAME_MAXLEN 64 + #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_HT_RATES 77 #define NL80211_MAX_SUPP_REG_RULES 64 @@ -2980,6 +3000,8 @@ enum nl80211_sta_bss_param { * received from the station (u64, usec) * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) + * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data) + * ACK frame (s8, dBm) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3019,6 +3041,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_RX_DURATION, NL80211_STA_INFO_PAD, NL80211_STA_INFO_ACK_SIGNAL, + NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -3036,6 +3059,7 @@ enum nl80211_sta_info { * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted * MSDUs (u64) * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) * @NUM_NL80211_TID_STATS: number of attributes here * @NL80211_TID_STATS_MAX: highest numbered attribute here */ @@ -3046,6 +3070,7 @@ enum nl80211_tid_stats { NL80211_TID_STATS_TX_MSDU_RETRIES, NL80211_TID_STATS_TX_MSDU_FAILED, NL80211_TID_STATS_PAD, + NL80211_TID_STATS_TXQ_STATS, /* keep last */ NUM_NL80211_TID_STATS, @@ -3053,6 +3078,44 @@ enum nl80211_tid_stats { }; /** + * enum nl80211_txq_stats - per TXQ statistics attributes + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved + * @NUM_NL80211_TXQ_STATS: number of attributes here + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently + * backlogged + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen + * @NL80211_TXQ_STATS_DROPS: total number of packet drops + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow + * (only for per-phy stats) + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here + */ +enum nl80211_txq_stats { + __NL80211_TXQ_STATS_INVALID, + NL80211_TXQ_STATS_BACKLOG_BYTES, + NL80211_TXQ_STATS_BACKLOG_PACKETS, + NL80211_TXQ_STATS_FLOWS, + NL80211_TXQ_STATS_DROPS, + NL80211_TXQ_STATS_ECN_MARKS, + NL80211_TXQ_STATS_OVERLIMIT, + NL80211_TXQ_STATS_OVERMEMORY, + NL80211_TXQ_STATS_COLLISIONS, + NL80211_TXQ_STATS_TX_BYTES, + NL80211_TXQ_STATS_TX_PACKETS, + NL80211_TXQ_STATS_MAX_FLOWS, + + /* keep last */ + NUM_NL80211_TXQ_STATS, + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 +}; + +/** * enum nl80211_mpath_flags - nl80211 mesh path flags * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active @@ -3142,6 +3205,29 @@ enum nl80211_band_attr { #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA /** + * enum nl80211_wmm_rule - regulatory wmm rule + * + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. + * @nl80211_WMMR_MAX: highest possible wmm rule. + * @__NL80211_WMMR_LAST: Internal use. + */ +enum nl80211_wmm_rule { + __NL80211_WMMR_INVALID, + NL80211_WMMR_CW_MIN, + NL80211_WMMR_CW_MAX, + NL80211_WMMR_AIFSN, + NL80211_WMMR_TXOP, + + /* keep last */ + __NL80211_WMMR_LAST, + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 +}; + +/** * enum nl80211_frequency_attr - frequency attributes * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz @@ -3190,6 +3276,9 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. + * This is a nested attribute that contains the wmm limitation per AC. + * (see &enum nl80211_wmm_rule) * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3218,6 +3307,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, + NL80211_FREQUENCY_ATTR_WMM, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3401,7 +3491,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. - * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed @@ -5038,6 +5128,11 @@ enum nl80211_feature_flags { * "radar detected" event. * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and * receiving control port frames over nl80211 instead of the netdevice. + * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack + * rssi if firmware support, this flag is to intimate about ack rssi + * support to nl80211. + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate + * TXQs. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -5070,6 +5165,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, NL80211_EXT_FEATURE_DFS_OFFLOAD, NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT, + NL80211_EXT_FEATURE_TXQS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5546,11 +5643,11 @@ enum nl80211_nan_func_attributes { * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. * This is a flag. * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if - * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if - * &NL80211_NAN_SRF_BF is present. This is a u8. + * %NL80211_NAN_SRF_BF is present. This is a u8. * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if - * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested * attribute. Each nested attribute is a MAC address. * @NUM_NL80211_NAN_SRF_ATTR: internal * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute |
