summaryrefslogtreecommitdiffstats
path: root/include/uapi/linux/mtio.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/mtio.h')
-rw-r--r--include/uapi/linux/mtio.h208
1 files changed, 208 insertions, 0 deletions
diff --git a/include/uapi/linux/mtio.h b/include/uapi/linux/mtio.h
new file mode 100644
index 0000000..18543e2
--- /dev/null
+++ b/include/uapi/linux/mtio.h
@@ -0,0 +1,208 @@
+/*
+ * linux/mtio.h header file for Linux. Written by H. Bergman
+ *
+ * Modified for special ioctls provided by zftape in September 1997
+ * by C.-J. Heine.
+ */
+
+#ifndef _LINUX_MTIO_H
+#define _LINUX_MTIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Structures and definitions for mag tape io control commands
+ */
+
+/* structure for MTIOCTOP - mag tape op command */
+struct mtop {
+ short mt_op; /* operations defined below */
+ int mt_count; /* how many of them */
+};
+
+/* Magnetic Tape operations [Not all operations supported by all drivers]: */
+#define MTRESET 0 /* +reset drive in case of problems */
+#define MTFSF 1 /* forward space over FileMark,
+ * position at first record of next file
+ */
+#define MTBSF 2 /* backward space FileMark (position before FM) */
+#define MTFSR 3 /* forward space record */
+#define MTBSR 4 /* backward space record */
+#define MTWEOF 5 /* write an end-of-file record (mark) */
+#define MTREW 6 /* rewind */
+#define MTOFFL 7 /* rewind and put the drive offline (eject?) */
+#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */
+#define MTRETEN 9 /* retension tape */
+#define MTBSFM 10 /* +backward space FileMark, position at FM */
+#define MTFSFM 11 /* +forward space FileMark, position at FM */
+#define MTEOM 12 /* goto end of recorded media (for appending files).
+ * MTEOM positions after the last FM, ready for
+ * appending another file.
+ */
+#define MTERASE 13 /* erase tape -- be careful! */
+
+#define MTRAS1 14 /* run self test 1 (nondestructive) */
+#define MTRAS2 15 /* run self test 2 (destructive) */
+#define MTRAS3 16 /* reserved for self test 3 */
+
+#define MTSETBLK 20 /* set block length (SCSI) */
+#define MTSETDENSITY 21 /* set tape density (SCSI) */
+#define MTSEEK 22 /* seek to block (Tandberg, etc.) */
+#define MTTELL 23 /* tell block (Tandberg, etc.) */
+#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
+ /* ordinary buffered operation with code 1 */
+#define MTFSS 25 /* space forward over setmarks */
+#define MTBSS 26 /* space backward over setmarks */
+#define MTWSM 27 /* write setmarks */
+
+#define MTLOCK 28 /* lock the drive door */
+#define MTUNLOCK 29 /* unlock the drive door */
+#define MTLOAD 30 /* execute the SCSI load command */
+#define MTUNLOAD 31 /* execute the SCSI unload command */
+#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
+#define MTSETPART 33 /* Change the active tape partition */
+#define MTMKPART 34 /* Format the tape with one or two partitions */
+#define MTWEOFI 35 /* write an end-of-file record (mark) in immediate mode */
+
+/* structure for MTIOCGET - mag tape get status command */
+
+struct mtget {
+ long mt_type; /* type of magtape device */
+ long mt_resid; /* residual count: (not sure)
+ * number of bytes ignored, or
+ * number of files not skipped, or
+ * number of records not skipped.
+ */
+ /* the following registers are device dependent */
+ long mt_dsreg; /* status register */
+ long mt_gstat; /* generic (device independent) status */
+ long mt_erreg; /* error register */
+ /* The next two fields are not always used */
+ __kernel_daddr_t mt_fileno; /* number of current file on tape */
+ __kernel_daddr_t mt_blkno; /* current block number */
+};
+
+
+
+/*
+ * Constants for mt_type. Not all of these are supported,
+ * and these are not all of the ones that are supported.
+ */
+#define MT_ISUNKNOWN 0x01
+#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */
+#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */
+#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */
+#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */
+#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */
+#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */
+#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */
+#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */
+#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */
+#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */
+#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */
+#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
+#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */
+#define MT_ISDDS1 0x51 /* DDS device without partitions */
+#define MT_ISDDS2 0x52 /* DDS device with partitions */
+#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0)
+ and SCSI emulated (DI, DP, USB) */
+#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */
+#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */
+
+/* QIC-40/80/3010/3020 ftape supported drives.
+ * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
+ */
+#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
+#define MT_ISFTAPE_FLAG 0x800000
+
+
+/* structure for MTIOCPOS - mag tape get position command */
+
+struct mtpos {
+ long mt_blkno; /* current block number */
+};
+
+
+/* mag tape io control commands */
+#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
+#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
+#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */
+
+
+/* Generic Mag Tape (device independent) status macros for examining
+ * mt_gstat -- HP-UX compatible.
+ * There is room for more generic status bits here, but I don't
+ * know which of them are reserved. At least three or so should
+ * be added to make this really useful.
+ */
+#define GMT_EOF(x) ((x) & 0x80000000)
+#define GMT_BOT(x) ((x) & 0x40000000)
+#define GMT_EOT(x) ((x) & 0x20000000)
+#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */
+#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */
+#define GMT_WR_PROT(x) ((x) & 0x04000000)
+/* #define GMT_ ? ((x) & 0x02000000) */
+#define GMT_ONLINE(x) ((x) & 0x01000000)
+#define GMT_D_6250(x) ((x) & 0x00800000)
+#define GMT_D_1600(x) ((x) & 0x00400000)
+#define GMT_D_800(x) ((x) & 0x00200000)
+/* #define GMT_ ? ((x) & 0x00100000) */
+/* #define GMT_ ? ((x) & 0x00080000) */
+#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */
+/* #define GMT_ ? ((x) & 0x00020000) */
+#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */
+#define GMT_CLN(x) ((x) & 0x00008000) /* cleaning requested */
+/* 15 generic status bits unused */
+
+
+/* SCSI-tape specific definitions */
+/* Bitfield shifts in the status */
+#define MT_ST_BLKSIZE_SHIFT 0
+#define MT_ST_BLKSIZE_MASK 0xffffff
+#define MT_ST_DENSITY_SHIFT 24
+#define MT_ST_DENSITY_MASK 0xff000000
+
+#define MT_ST_SOFTERR_SHIFT 0
+#define MT_ST_SOFTERR_MASK 0xffff
+
+/* Bitfields for the MTSETDRVBUFFER ioctl */
+#define MT_ST_OPTIONS 0xf0000000
+#define MT_ST_BOOLEANS 0x10000000
+#define MT_ST_SETBOOLEANS 0x30000000
+#define MT_ST_CLEARBOOLEANS 0x40000000
+#define MT_ST_WRITE_THRESHOLD 0x20000000
+#define MT_ST_DEF_BLKSIZE 0x50000000
+#define MT_ST_DEF_OPTIONS 0x60000000
+#define MT_ST_TIMEOUTS 0x70000000
+#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000)
+#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000)
+#define MT_ST_SET_CLN 0x80000000
+
+#define MT_ST_BUFFER_WRITES 0x1
+#define MT_ST_ASYNC_WRITES 0x2
+#define MT_ST_READ_AHEAD 0x4
+#define MT_ST_DEBUGGING 0x8
+#define MT_ST_TWO_FM 0x10
+#define MT_ST_FAST_MTEOM 0x20
+#define MT_ST_AUTO_LOCK 0x40
+#define MT_ST_DEF_WRITES 0x80
+#define MT_ST_CAN_BSR 0x100
+#define MT_ST_NO_BLKLIMS 0x200
+#define MT_ST_CAN_PARTITIONS 0x400
+#define MT_ST_SCSI2LOGICAL 0x800
+#define MT_ST_SYSV 0x1000
+#define MT_ST_NOWAIT 0x2000
+#define MT_ST_SILI 0x4000
+#define MT_ST_NOWAIT_EOF 0x8000
+
+/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
+#define MT_ST_CLEAR_DEFAULT 0xfffff
+#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000)
+#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000)
+#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000)
+
+/* The offset for the arguments for the special HP changer load command. */
+#define MT_ST_HPLOADER_OFFSET 10000
+
+#endif /* _LINUX_MTIO_H */
OpenPOWER on IntegriCloud