diff options
Diffstat (limited to 'include/uapi/linux/if_arp.h')
| -rw-r--r-- | include/uapi/linux/if_arp.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h new file mode 100644 index 0000000..82c7d1b --- /dev/null +++ b/include/uapi/linux/if_arp.h @@ -0,0 +1,159 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the ARP (RFC 826) protocol. + * + * Version: @(#)if_arp.h 1.0.1 04/16/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 + * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Florian La Roche, + * Jonathan Layes <layes@loran.com> + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IF_ARP_H +#define _UAPI_LINUX_IF_ARP_H + +#include <linux/netdevice.h> + +/* ARP protocol HARDWARE identifiers. */ +#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ +#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ +#define ARPHRD_EETHER 2 /* Experimental Ethernet */ +#define ARPHRD_AX25 3 /* AX.25 Level 2 */ +#define ARPHRD_PRONET 4 /* PROnet token ring */ +#define ARPHRD_CHAOS 5 /* Chaosnet */ +#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ +#define ARPHRD_ARCNET 7 /* ARCnet */ +#define ARPHRD_APPLETLK 8 /* APPLEtalk */ +#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ +#define ARPHRD_ATM 19 /* ATM */ +#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ +#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ +#define ARPHRD_EUI64 27 /* EUI-64 */ +#define ARPHRD_INFINIBAND 32 /* InfiniBand */ + +/* Dummy types for non ARP hardware */ +#define ARPHRD_SLIP 256 +#define ARPHRD_CSLIP 257 +#define ARPHRD_SLIP6 258 +#define ARPHRD_CSLIP6 259 +#define ARPHRD_RSRVD 260 /* Notional KISS type */ +#define ARPHRD_ADAPT 264 +#define ARPHRD_ROSE 270 +#define ARPHRD_X25 271 /* CCITT X.25 */ +#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ +#define ARPHRD_CAN 280 /* Controller Area Network */ +#define ARPHRD_PPP 512 +#define ARPHRD_CISCO 513 /* Cisco HDLC */ +#define ARPHRD_HDLC ARPHRD_CISCO +#define ARPHRD_LAPB 516 /* LAPB */ +#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ +#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ + +#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ +#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ +#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ +#define ARPHRD_SKIP 771 /* SKIP vif */ +#define ARPHRD_LOOPBACK 772 /* Loopback device */ +#define ARPHRD_LOCALTLK 773 /* Localtalk device */ +#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ +#define ARPHRD_BIF 775 /* AP1000 BIF */ +#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ +#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ +#define ARPHRD_IPGRE 778 /* GRE over IP */ +#define ARPHRD_PIMREG 779 /* PIMSM register interface */ +#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ +#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ +#define ARPHRD_ECONET 782 /* Acorn Econet */ +#define ARPHRD_IRDA 783 /* Linux-IrDA */ +/* ARP works differently on different FC media .. so */ +#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ +#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ +#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ +#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ + /* 787->799 reserved for fibrechannel media types */ +#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ +#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ +#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ +#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ + +#define ARPHRD_PHONET 820 /* PhoNet media type */ +#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ +#define ARPHRD_CAIF 822 /* CAIF media type */ +#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ + +#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ +#define ARPHRD_NONE 0xFFFE /* zero header length */ + +/* ARP protocol opcodes. */ +#define ARPOP_REQUEST 1 /* ARP request */ +#define ARPOP_REPLY 2 /* ARP reply */ +#define ARPOP_RREQUEST 3 /* RARP request */ +#define ARPOP_RREPLY 4 /* RARP reply */ +#define ARPOP_InREQUEST 8 /* InARP request */ +#define ARPOP_InREPLY 9 /* InARP reply */ +#define ARPOP_NAK 10 /* (ATM)ARP NAK */ + + +/* ARP ioctl request. */ +struct arpreq { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ + char arp_dev[16]; +}; + +struct arpreq_old { + struct sockaddr arp_pa; /* protocol address */ + struct sockaddr arp_ha; /* hardware address */ + int arp_flags; /* flags */ + struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ +}; + +/* ARP Flag values. */ +#define ATF_COM 0x02 /* completed entry (ha valid) */ +#define ATF_PERM 0x04 /* permanent entry */ +#define ATF_PUBL 0x08 /* publish entry */ +#define ATF_USETRAILERS 0x10 /* has requested trailers */ +#define ATF_NETMASK 0x20 /* want to use a netmask (only + for proxy entries) */ +#define ATF_DONTPUB 0x40 /* don't answer this addresses */ + +/* + * This structure defines an ethernet arp header. + */ + +struct arphdr { + __be16 ar_hrd; /* format of hardware address */ + __be16 ar_pro; /* format of protocol address */ + unsigned char ar_hln; /* length of hardware address */ + unsigned char ar_pln; /* length of protocol address */ + __be16 ar_op; /* ARP opcode (command) */ + +#if 0 + /* + * Ethernet looks like this : This bit is variable sized however... + */ + unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ + unsigned char ar_sip[4]; /* sender IP address */ + unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ + unsigned char ar_tip[4]; /* target IP address */ +#endif + +}; + + +#endif /* _UAPI_LINUX_IF_ARP_H */ |
