summaryrefslogtreecommitdiffstats
path: root/include/uapi/linux/fs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/fs.h')
-rw-r--r--include/uapi/linux/fs.h202
1 files changed, 202 insertions, 0 deletions
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
new file mode 100644
index 0000000..780d4c6
--- /dev/null
+++ b/include/uapi/linux/fs.h
@@ -0,0 +1,202 @@
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be
+ * recompiled to take full advantage of the new limits..
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET 0 /* seek relative to beginning of file */
+#define SEEK_CUR 1 /* seek relative to current file position */
+#define SEEK_END 2 /* seek relative to end of file */
+#define SEEK_DATA 3 /* seek to the next data */
+#define SEEK_HOLE 4 /* seek to the next hole */
+#define SEEK_MAX SEEK_HOLE
+
+struct fstrim_range {
+ __u64 start;
+ __u64 len;
+ __u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+ unsigned long nr_files; /* read only */
+ unsigned long nr_free_files; /* read only */
+ unsigned long max_files; /* tunable */
+};
+
+struct inodes_stat_t {
+ int nr_inodes;
+ int nr_unused;
+ int dummy[5]; /* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE 8192 /* this can well be larger on a larger system */
+
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY 1 /* Mount read-only */
+#define MS_NOSUID 2 /* Ignore suid and sgid bits */
+#define MS_NODEV 4 /* Disallow access to device special files */
+#define MS_NOEXEC 8 /* Disallow program execution */
+#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
+#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
+#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
+#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
+#define MS_NOATIME 1024 /* Do not update access times. */
+#define MS_NODIRATIME 2048 /* Do not update directory access times */
+#define MS_BIND 4096
+#define MS_MOVE 8192
+#define MS_REC 16384
+#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
+ MS_VERBOSE is deprecated. */
+#define MS_SILENT 32768
+#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
+#define MS_UNBINDABLE (1<<17) /* change to unbindable */
+#define MS_PRIVATE (1<<18) /* change to private */
+#define MS_SLAVE (1<<19) /* change to slave */
+#define MS_SHARED (1<<20) /* change to shared */
+#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION (1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_NOSEC (1<<28)
+#define MS_BORN (1<<29)
+#define MS_ACTIVE (1<<30)
+#define MS_NOUSER (1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* the read-only stuff doesn't really belong here, but any other place is
+ probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
+#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
+#define BLKRRPART _IO(0x12,95) /* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
+#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
+#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
+#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
+#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons. Do not use sizeof! */
+
+#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+ probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET _IOR(0x12,112,size_t)
+#define BLKBSZSET _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+
+#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
+#define FIBMAP _IO(0x00,1) /* bmap access */
+#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
+#define FITHAW _IOWR('X', 120, int) /* Thaw */
+#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
+
+#define FS_IOC_GETFLAGS _IOR('f', 1, long)
+#define FS_IOC_SETFLAGS _IOW('f', 2, long)
+#define FS_IOC_GETVERSION _IOR('v', 1, long)
+#define FS_IOC_SETVERSION _IOW('v', 2, long)
+#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
+#define FS_IOC32_GETVERSION _IOR('v', 1, int)
+#define FS_IOC32_SETVERSION _IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define FS_SECRM_FL 0x00000001 /* Secure deletion */
+#define FS_UNRM_FL 0x00000002 /* Undelete */
+#define FS_COMPR_FL 0x00000004 /* Compress file */
+#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
+#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL 0x00000040 /* do not dump file */
+#define FS_NOATIME_FL 0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL 0x00000100
+#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL 0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL 0x00001000 /* btree format dir */
+#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL 0x00080000 /* Extents */
+#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
+#endif /* _UAPI_LINUX_FS_H */
OpenPOWER on IntegriCloud