diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 319 |
1 files changed, 304 insertions, 15 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0ad1f47..58d719d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -263,6 +263,7 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed, * note that this is only called when it changes after the channel * context had been assigned. + * @BSS_CHANGED_OCB: OCB join status changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -287,6 +288,7 @@ enum ieee80211_bss_change { BSS_CHANGED_P2P_PS = 1<<19, BSS_CHANGED_BEACON_INFO = 1<<20, BSS_CHANGED_BANDWIDTH = 1<<21, + BSS_CHANGED_OCB = 1<<22, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -739,7 +741,8 @@ struct ieee80211_tx_info { u8 ampdu_ack_len; u8 ampdu_len; u8 antenna; - void *status_driver_data[21 / sizeof(void *)]; + u16 tx_time; + void *status_driver_data[19 / sizeof(void *)]; } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -879,6 +882,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * subframes share the same sequence number. Reported subframes can be * either regular MSDU or singly A-MSDUs. Subframes must not be * interleaved with other frames. + * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific + * radiotap data in the skb->data (before the frame) as described by + * the &struct ieee80211_vendor_radiotap. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -908,6 +914,7 @@ enum mac80211_rx_flags { RX_FLAG_10MHZ = BIT(28), RX_FLAG_5MHZ = BIT(29), RX_FLAG_AMSDU_MORE = BIT(30), + RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), }; #define RX_FLAG_STBC_SHIFT 26 @@ -979,6 +986,39 @@ struct ieee80211_rx_status { }; /** + * struct ieee80211_vendor_radiotap - vendor radiotap data information + * @present: presence bitmap for this vendor namespace + * (this could be extended in the future if any vendor needs more + * bits, the radiotap spec does allow for that) + * @align: radiotap vendor namespace alignment. This defines the needed + * alignment for the @data field below, not for the vendor namespace + * description itself (which has a fixed 2-byte alignment) + * Must be a power of two, and be set to at least 1! + * @oui: radiotap vendor namespace OUI + * @subns: radiotap vendor sub namespace + * @len: radiotap vendor sub namespace skip length, if alignment is done + * then that's added to this, i.e. this is only the length of the + * @data field. + * @pad: number of bytes of padding after the @data, this exists so that + * the skb data alignment can be preserved even if the data has odd + * length + * @data: the actual vendor namespace data + * + * This struct, including the vendor data, goes into the skb->data before + * the 802.11 header. It's split up in mac80211 using the align/oui/subns + * data. + */ +struct ieee80211_vendor_radiotap { + u32 present; + u8 align; + u8 oui[3]; + u8 subns; + u8 pad; + u16 len; + u8 data[]; +} __packed; + +/** * enum ieee80211_conf_flags - configuration flags * * Flags to define PHY configuration options @@ -1117,6 +1157,8 @@ struct ieee80211_conf { * Function (TSF) timer when the frame containing the channel switch * announcement was received. This is simply the rx.mactime parameter * the driver passed into mac80211. + * @device_timestamp: arbitrary timestamp for the device, this is the + * rx.device_timestamp parameter the driver passed to mac80211. * @block_tx: Indicates whether transmission must be blocked before the * scheduled channel switch, as indicated by the AP. * @chandef: the new channel to switch to @@ -1124,6 +1166,7 @@ struct ieee80211_conf { */ struct ieee80211_channel_switch { u64 timestamp; + u32 device_timestamp; bool block_tx; struct cfg80211_chan_def chandef; u8 count; @@ -1423,6 +1466,8 @@ struct ieee80211_sta_rates { * @smps_mode: current SMPS mode (off, static or dynamic) * @rates: rate control selection table * @tdls: indicates whether the STA is a TDLS peer + * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only + * valid if the STA is a TDLS peer in the first place. */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1438,6 +1483,7 @@ struct ieee80211_sta { enum ieee80211_smps_mode smps_mode; struct ieee80211_sta_rates __rcu *rates; bool tdls; + bool tdls_initiator; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -1576,6 +1622,10 @@ struct ieee80211_tx_control { * a virtual monitor interface when monitor interfaces are the only * active interfaces. * + * @IEEE80211_HW_NO_AUTO_VIF: The driver would like for no wlanX to + * be created. It is expected user-space will create vifs as + * desired (and thus have them named as desired). + * * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface * queue mapping in order to use different queues (not just one per AC) * for different virtual interfaces. See the doc section on HW queue @@ -1622,7 +1672,8 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, IEEE80211_HW_WANT_MONITOR_VIF = 1<<14, - /* free slots */ + IEEE80211_HW_NO_AUTO_VIF = 1<<15, + /* free slot */ IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, @@ -1776,6 +1827,31 @@ struct ieee80211_scan_request { }; /** + * struct ieee80211_tdls_ch_sw_params - TDLS channel switch parameters + * + * @sta: peer this TDLS channel-switch request/response came from + * @chandef: channel referenced in a TDLS channel-switch request + * @action_code: see &enum ieee80211_tdls_actioncode + * @status: channel-switch response status + * @timestamp: time at which the frame was received + * @switch_time: switch-timing parameter received in the frame + * @switch_timeout: switch-timing parameter received in the frame + * @tmpl_skb: TDLS switch-channel response template + * @ch_sw_tm_ie: offset of the channel-switch timing IE inside @tmpl_skb + */ +struct ieee80211_tdls_ch_sw_params { + struct ieee80211_sta *sta; + struct cfg80211_chan_def *chandef; + u8 action_code; + u32 status; + u32 timestamp; + u16 switch_time; + u16 switch_timeout; + struct sk_buff *tmpl_skb; + u32 ch_sw_tm_ie; +}; + +/** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * * @wiphy: the &struct wiphy which we want to query @@ -2375,6 +2451,22 @@ enum ieee80211_roc_type { }; /** + * enum ieee80211_reconfig_complete_type - reconfig type + * + * This enum is used by the reconfig_complete() callback to indicate what + * reconfiguration type was completed. + * + * @IEEE80211_RECONFIG_TYPE_RESTART: hw restart type + * (also due to resume() callback returning 1) + * @IEEE80211_RECONFIG_TYPE_SUSPEND: suspend type (regardless + * of wowlan configuration) + */ +enum ieee80211_reconfig_type { + IEEE80211_RECONFIG_TYPE_RESTART, + IEEE80211_RECONFIG_TYPE_SUSPEND, +}; + +/** * struct ieee80211_ops - callbacks from mac80211 to the driver * * This structure contains various callbacks that the driver may @@ -2530,7 +2622,9 @@ enum ieee80211_roc_type { * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. - * The callback can sleep. + * The mac_addr parameter allows supporting NL80211_SCAN_FLAG_RANDOM_ADDR, + * the driver may set the NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR flag if it + * can use this parameter. The callback can sleep. * * @sw_scan_complete: Notifier function that is called just after a * software scan finished. Can be NULL, if the driver doesn't need @@ -2601,6 +2695,9 @@ enum ieee80211_roc_type { * uses hardware rate control (%IEEE80211_HW_HAS_RATE_CONTROL) since * otherwise the rate control algorithm is notified directly. * Must be atomic. + * @sta_rate_tbl_update: Notifies the driver that the rate table changed. This + * is only used if the configured rate control algorithm actually uses + * the new rate table API, and is therefore optional. Must be atomic. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. @@ -2809,11 +2906,11 @@ enum ieee80211_roc_type { * disabled/enabled via @bss_info_changed. * @stop_ap: Stop operation on the AP interface. * - * @restart_complete: Called after a call to ieee80211_restart_hw(), when the - * reconfiguration has completed. This can help the driver implement the - * reconfiguration step. Also called when reconfiguring because the - * driver's resume function returned 1, as this is just like an "inline" - * hardware restart. This callback may sleep. + * @reconfig_complete: Called after a call to ieee80211_restart_hw() and + * during resume, when the reconfiguration has completed. + * This can help the driver implement the reconfiguration step (and + * indicate mac80211 is ready to receive frames). + * This callback may sleep. * * @ipv6_addr_change: IPv6 address assignment on the given interface changed. * Currently, this is only called for managed or P2P client interfaces. @@ -2829,6 +2926,13 @@ enum ieee80211_roc_type { * transmitted and then call ieee80211_csa_finish(). * If the CSA count starts as zero or 1, this function will not be called, * since there won't be any time to beacon before the switch anyway. + * @pre_channel_switch: This is an optional callback that is called + * before a channel switch procedure is started (ie. when a STA + * gets a CSA or an userspace initiated channel-switch), allowing + * the driver to prepare for the channel switch. + * @post_channel_switch: This is an optional callback that is called + * after a channel switch procedure is completed, allowing the + * driver to go back to a normal configuration. * * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all * information in bss_conf is set up and the beacon can be retrieved. A @@ -2838,6 +2942,26 @@ enum ieee80211_roc_type { * @get_expected_throughput: extract the expected throughput towards the * specified station. The returned value is expressed in Kbps. It returns 0 * if the RC algorithm does not have proper data to provide. + * + * @get_txpower: get current maximum tx power (in dBm) based on configuration + * and hardware limits. + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. The + * driver receives a channel-switch request template and the location of + * the switch-timing IE within the template as part of the invocation. + * The template is valid only within the call, and the driver can + * optionally copy the skb for further re-use. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. + * @tdls_recv_channel_switch: a TDLS channel-switch related frame (request or + * response) has been received from a remote peer. The driver gets + * parameters parsed from the incoming frame and may use them to continue + * an ongoing channel-switch operation. In addition, a channel-switch + * response template is provided, together with the location of the + * switch-timing IE within the template. The skb can only be used within + * the function call. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2897,8 +3021,11 @@ struct ieee80211_ops { struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - void (*sw_scan_start)(struct ieee80211_hw *hw); - void (*sw_scan_complete)(struct ieee80211_hw *hw); + void (*sw_scan_start)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr); + void (*sw_scan_complete)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*get_stats)(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, @@ -2932,6 +3059,9 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed); + void (*sta_rate_tbl_update)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int (*conf_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 ac, const struct ieee80211_tx_queue_params *params); @@ -2959,6 +3089,7 @@ struct ieee80211_ops { void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 queues, bool drop); void (*channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct ieee80211_channel_switch *ch_switch); int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); @@ -3025,7 +3156,8 @@ struct ieee80211_ops { int n_vifs, enum ieee80211_chanctx_switch_mode mode); - void (*restart_complete)(struct ieee80211_hw *hw); + void (*reconfig_complete)(struct ieee80211_hw *hw, + enum ieee80211_reconfig_type reconfig_type); #if IS_ENABLED(CONFIG_IPV6) void (*ipv6_addr_change)(struct ieee80211_hw *hw, @@ -3035,14 +3167,54 @@ struct ieee80211_ops { void (*channel_switch_beacon)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_chan_def *chandef); + int (*pre_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_channel_switch *ch_switch); + + int (*post_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); u32 (*get_expected_throughput)(struct ieee80211_sta *sta); + int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + int *dbm); + + int (*tdls_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u8 oper_class, + struct cfg80211_chan_def *chandef, + struct sk_buff *tmpl_skb, u32 ch_sw_tm_ie); + void (*tdls_cancel_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_tdls_ch_sw_params *params); }; /** - * ieee80211_alloc_hw - Allocate a new hardware device + * ieee80211_alloc_hw_nm - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac80211 allocates a private data area for the driver pointed to by + * @priv in &struct ieee80211_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + * @requested_name: Requested name for this device. + * NULL is valid value, and means use the default naming (phy%d) + * + * Return: A pointer to the new hardware device, or %NULL on error. + */ +struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len, + const struct ieee80211_ops *ops, + const char *requested_name); + +/** + * ieee80211_alloc_hw - Allocate a new hardware device * * This must be called once for each hardware device. The returned pointer * must be used to refer to this device when calling other functions. @@ -3055,8 +3227,12 @@ struct ieee80211_ops { * * Return: A pointer to the new hardware device, or %NULL on error. */ +static inline struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, - const struct ieee80211_ops *ops); + const struct ieee80211_ops *ops) +{ + return ieee80211_alloc_hw_nm(priv_data_len, ops, NULL); +} /** * ieee80211_register_hw - Register hardware device @@ -3443,6 +3619,26 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb); /** + * ieee80211_tx_status_noskb - transmit status callback without skb + * + * This function can be used as a replacement for ieee80211_tx_status + * in drivers that cannot reliably map tx status information back to + * specific skbs. + * + * Calls to this function for a single hardware must be synchronized + * against each other. Calls to this function, ieee80211_tx_status_ni() + * and ieee80211_tx_status_irqsafe() may not be mixed for a single hardware. + * + * @hw: the hardware the frame was transmitted by + * @sta: the receiver station to which this packet is sent + * (NULL for multicast packets) + * @info: tx status information + */ +void ieee80211_tx_status_noskb(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct ieee80211_tx_info *info); + +/** * ieee80211_tx_status_ni - transmit status callback (in process context) * * Like ieee80211_tx_status() but can be called in process context. @@ -3655,7 +3851,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, /** * ieee80211_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @src_addr: source MAC address * @ssid: SSID buffer * @ssid_len: length of SSID * @tailroom: tailroom to reserve at end of SKB for IEs @@ -3666,7 +3862,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, + const u8 *src_addr, const u8 *ssid, size_t ssid_len, size_t tailroom); @@ -4172,6 +4368,22 @@ void ieee80211_iterate_active_interfaces_rtnl(struct ieee80211_hw *hw, void *data); /** + * ieee80211_iterate_stations_atomic - iterate stations + * + * This function iterates over all stations associated with a given + * hardware that are currently uploaded to the driver and calls the callback + * function for them. + * This function requires the iterator callback function to be atomic, + * + * @hw: the hardware struct of which the interfaces should be iterated over + * @iterator: the iterator function to call, cannot sleep + * @data: first argument of the iterator function + */ +void ieee80211_iterate_stations_atomic(struct ieee80211_hw *hw, + void (*iterator)(void *data, + struct ieee80211_sta *sta), + void *data); +/** * ieee80211_queue_work - add work onto the mac80211 workqueue * * Drivers and mac80211 use this to add work onto the mac80211 workqueue. @@ -4480,6 +4692,14 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, gfp_t gfp); /** + * ieee80211_cqm_beacon_loss_notify - inform CQM of beacon loss + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @gfp: context flags + */ +void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp); + +/** * ieee80211_radar_detected - inform that a radar was detected * * @hw: pointer as obtained from ieee80211_alloc_hw() @@ -4637,6 +4857,10 @@ struct rate_control_ops { void (*free_sta)(void *priv, struct ieee80211_sta *sta, void *priv_sta); + void (*tx_status_noskb)(void *priv, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta, + struct ieee80211_tx_info *info); void (*tx_status)(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb); @@ -4888,4 +5112,69 @@ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf); void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, enum nl80211_tdls_operation oper, u16 reason_code, gfp_t gfp); + +/** + * ieee80211_reserve_tid - request to reserve a specific TID + * + * There is sometimes a need (such as in TDLS) for blocking the driver from + * using a specific TID so that the FW can use it for certain operations such + * as sending PTI requests. To make sure that the driver doesn't use that TID, + * this function must be called as it flushes out packets on this TID and marks + * it as blocked, so that any transmit for the station on this TID will be + * redirected to the alternative TID in the same AC. + * + * Note that this function blocks and may call back into the driver, so it + * should be called without driver locks held. Also note this function should + * only be called from the driver's @sta_state callback. + * + * @sta: the station to reserve the TID for + * @tid: the TID to reserve + * + * Returns: 0 on success, else on failure + */ +int ieee80211_reserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** + * ieee80211_unreserve_tid - request to unreserve a specific TID + * + * Once there is no longer any need for reserving a certain TID, this function + * should be called, and no longer will packets have their TID modified for + * preventing use of this TID in the driver. + * + * Note that this function blocks and acquires a lock, so it should be called + * without driver locks held. Also note this function should only be called + * from the driver's @sta_state callback. + * + * @sta: the station + * @tid: the TID to unreserve + */ +void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** + * ieee80211_ie_split - split an IE buffer according to ordering + * + * @ies: the IE buffer + * @ielen: the length of the IE buffer + * @ids: an array with element IDs that are allowed before + * the split + * @n_ids: the size of the element ID array + * @offset: offset where to start splitting in the buffer + * + * This function splits an IE buffer by updating the @offset + * variable to point to the location where the buffer should be + * split. + * + * It assumes that the given IE buffer is well-formed, this + * has to be guaranteed by the caller! + * + * It also assumes that the IEs in the buffer are ordered + * correctly, if not the result of using this function will not + * be ordered correctly either, i.e. it does no reordering. + * + * The function returns the offset where the next part of the + * buffer starts, which may be @ielen if the entire (remainder) + * of the buffer should be used. + */ +size_t ieee80211_ie_split(const u8 *ies, size_t ielen, + const u8 *ids, int n_ids, size_t offset); #endif /* MAC80211_H */ |
