diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 591 |
1 files changed, 313 insertions, 278 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index bcd1623..4dd3d93 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -42,7 +42,7 @@ * tasklet function. * * NOTE: If the driver opts to use the _irqsafe() functions, it may not also - * use the non-irqsafe functions! + * use the non-IRQ-safe functions! */ /** @@ -85,7 +85,7 @@ enum ieee80211_notification_types { * struct ieee80211_ht_bss_info - describing BSS's HT characteristics * * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS + * to describe 802.11n HT characteristics in a BSS. * * @primary_channel: channel number of primery channel * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) @@ -98,77 +98,49 @@ struct ieee80211_ht_bss_info { }; /** + * enum ieee80211_max_queues - maximum number of queues + * + * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. + * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable + * for A-MPDU operation. + */ +enum ieee80211_max_queues { + IEEE80211_MAX_QUEUES = 16, + IEEE80211_MAX_AMPDU_QUEUES = 16, +}; + +/** * struct ieee80211_tx_queue_params - transmit queue configuration * * The information provided in this structure is required for QoS * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * - * @aifs: arbitration interface space [0..255, -1: use default] - * @cw_min: minimum contention window [will be a value of the form - * 2^n-1 in the range 1..1023; 0: use default] + * @aifs: arbitration interface space [0..255] + * @cw_min: minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled */ struct ieee80211_tx_queue_params { - s16 aifs; + u16 txop; u16 cw_min; u16 cw_max; - u16 txop; + u8 aifs; }; /** - * struct ieee80211_tx_queue_stats_data - transmit queue statistics + * struct ieee80211_tx_queue_stats - transmit queue statistics * * @len: number of packets in queue * @limit: queue length limit * @count: number of frames sent */ -struct ieee80211_tx_queue_stats_data { +struct ieee80211_tx_queue_stats { unsigned int len; unsigned int limit; unsigned int count; }; -/** - * enum ieee80211_tx_queue - transmit queue number - * - * These constants are used with some callbacks that take a - * queue number to set parameters for a queue. - * - * @IEEE80211_TX_QUEUE_DATA0: data queue 0 - * @IEEE80211_TX_QUEUE_DATA1: data queue 1 - * @IEEE80211_TX_QUEUE_DATA2: data queue 2 - * @IEEE80211_TX_QUEUE_DATA3: data queue 3 - * @IEEE80211_TX_QUEUE_DATA4: data queue 4 - * @IEEE80211_TX_QUEUE_SVP: ?? - * @NUM_TX_DATA_QUEUES: number of data queues - * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be - * sent after a beacon - * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames - * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU - */ -enum ieee80211_tx_queue { - IEEE80211_TX_QUEUE_DATA0, - IEEE80211_TX_QUEUE_DATA1, - IEEE80211_TX_QUEUE_DATA2, - IEEE80211_TX_QUEUE_DATA3, - IEEE80211_TX_QUEUE_DATA4, - IEEE80211_TX_QUEUE_SVP, - - NUM_TX_DATA_QUEUES, - -/* due to stupidity in the sub-ioctl userspace interface, the items in - * this struct need to have fixed values. As soon as it is removed, we can - * fix these entries. */ - IEEE80211_TX_QUEUE_AFTER_BEACON = 6, - IEEE80211_TX_QUEUE_BEACON = 7, - NUM_TX_DATA_QUEUES_AMPDU = 16 -}; - -struct ieee80211_tx_queue_stats { - struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES_AMPDU]; -}; - struct ieee80211_low_level_stats { unsigned int dot11ACKFailureCount; unsigned int dot11RTSFailureCount; @@ -229,91 +201,151 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe Tx configuration for - * the Tx frame - * - * These flags are used with the @flags member of &ieee80211_tx_control - * - * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame - * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) - * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TXCTL_RATE_CTRL_PROBE - * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter - * for destination station - * @IEEE80211_TXCTL_REQUEUE: - * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long - * retry value - * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211 - * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon - * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted - * from antenna_sel_tx, so if 1 antenna is marked - * use SISO, 2 antennas marked use MIMO, n antennas - * marked use MIMO_n. - * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval + * enum mac80211_tx_control_flags - flags to describe transmission information/status + * + * These flags are used with the @flags member of &ieee80211_tx_info. + * + * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; + * e.g., for EAPOL frame + * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame + * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., + * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD + * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination + * station + * @IEEE80211_TX_CTL_REQUEUE: TBD + * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD + * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the + * through set_retry_limit configured long retry value + * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 + * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number + * of streams when this flag is on can be extracted from antenna_sel_tx, + * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n + * antennas marked use MIMO_n. + * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame + * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width + * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels + * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval + * @IEEE80211_TX_CTL_INJECTED: TBD + * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. + * @IEEE80211_TX_STAT_ACK: Frame was acknowledged + * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. + * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, + * so consider using block ack request (BAR). + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons always be clear for frames without a sequence number field. */ enum mac80211_tx_control_flags { - IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0), - IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1), - IEEE80211_TXCTL_USE_RTS_CTS = (1<<2), - IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3), - IEEE80211_TXCTL_NO_ACK = (1<<4), - IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5), - IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6), - IEEE80211_TXCTL_REQUEUE = (1<<7), - IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8), - IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9), - IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10), - IEEE80211_TXCTL_EAPOL_FRAME = (1<<11), - IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12), - IEEE80211_TXCTL_AMPDU = (1<<13), - IEEE80211_TXCTL_OFDM_HT = (1<<14), - IEEE80211_TXCTL_GREEN_FIELD = (1<<15), - IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16), - IEEE80211_TXCTL_DUP_DATA = (1<<17), - IEEE80211_TXCTL_SHORT_GI = (1<<18), + IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), + IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), + IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), + IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), + IEEE80211_TX_CTL_NO_ACK = BIT(4), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), + IEEE80211_TX_CTL_REQUEUE = BIT(7), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), + IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), + IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), + IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), + IEEE80211_TX_CTL_AMPDU = BIT(13), + IEEE80211_TX_CTL_OFDM_HT = BIT(14), + IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), + IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), + IEEE80211_TX_CTL_DUP_DATA = BIT(17), + IEEE80211_TX_CTL_SHORT_GI = BIT(18), + IEEE80211_TX_CTL_INJECTED = BIT(19), + IEEE80211_TX_STAT_TX_FILTERED = BIT(20), + IEEE80211_TX_STAT_ACK = BIT(21), + IEEE80211_TX_STAT_AMPDU = BIT(22), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), }; -/* Transmit control fields. This data structure is passed to low-level driver - * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). */ -struct ieee80211_tx_control { - struct ieee80211_vif *vif; - struct ieee80211_rate *tx_rate; - - /* Transmit rate for RTS/CTS frame */ - struct ieee80211_rate *rts_cts_rate; - - /* retry rate for the last retries */ - struct ieee80211_rate *alt_retry_rate; - - u32 flags; /* tx control flags defined above */ - u8 key_idx; /* keyidx from hw->set_key(), undefined if - * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ - u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ - u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit - * position represents antenna number used */ - u8 icv_len; /* length of the ICV/MIC field in octets */ - u8 iv_len; /* length of the IV field in octets */ - u8 queue; /* hardware queue to use for this frame; - * 0 = highest, hw->queues-1 = lowest */ - u16 aid; /* Station AID */ - int type; /* internal */ +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ + (sizeof(((struct sk_buff *)0)->cb) - 8) +#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ + (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) + +/** + * struct ieee80211_tx_info - skb transmit information + * + * This structure is placed in skb->cb for three uses: + * (1) mac80211 TX control - mac80211 tells the driver what to do + * (2) driver internal use (if applicable) + * (3) TX status information - driver tells mac80211 what happened + * + * @flags: transmit info flags, defined above + * @band: TBD + * @tx_rate_idx: TBD + * @antenna_sel_tx: TBD + * @control: union for control data + * @status: union for status data + * @driver_data: array of driver_data pointers + * @retry_count: number of retries + * @excessive_retries: set to 1 if the frame was retried many times + * but not acknowledged + * @ampdu_ack_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_ack_map: block ack bit map for the aggregation. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ack_signal: signal strength of the ACK frame + */ +struct ieee80211_tx_info { + /* common information */ + u32 flags; + u8 band; + s8 tx_rate_idx; + u8 antenna_sel_tx; + + /* 1 byte hole */ + + union { + struct { + struct ieee80211_vif *vif; + struct ieee80211_key_conf *hw_key; + unsigned long jiffies; + int ifindex; + u16 aid; + s8 rts_cts_rate_idx, alt_retry_rate_idx; + u8 retry_limit; + u8 icv_len; + u8 iv_len; + } control; + struct { + u64 ampdu_ack_map; + int ack_signal; + u8 retry_count; + bool excessive_retries; + u8 ampdu_ack_len; + } status; + void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + }; }; +static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) +{ + return (struct ieee80211_tx_info *)skb->cb; +} + /** * enum mac80211_rx_flags - receive flags @@ -353,13 +385,16 @@ enum mac80211_rx_flags { * The low-level driver should provide this information (the subset * supported by hardware) to the 802.11 code with each received * frame. + * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. * @band: the active band when this frame was received * @freq: frequency the radio was tuned to when receiving this frame, in MHz - * @ssi: signal strength when receiving this frame - * @signal: used as 'qual' in statistics reporting - * @noise: PHY noise when receiving this frame + * @signal: signal strength when receiving this frame, either in dBm, in dB or + * unspecified depending on the hardware capabilities flags + * @IEEE80211_HW_SIGNAL_* + * @noise: noise when receiving this frame, in dBm. + * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates * @flag: %RX_FLAG_* @@ -368,64 +403,15 @@ struct ieee80211_rx_status { u64 mactime; enum ieee80211_band band; int freq; - int ssi; int signal; int noise; + int qual; int antenna; int rate_idx; int flag; }; /** - * enum ieee80211_tx_status_flags - transmit status flags - * - * Status flags to indicate various transmit conditions. - * - * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted - * because the destination STA was in powersave mode. - * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged - * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status - * is for the whole aggregation. - */ -enum ieee80211_tx_status_flags { - IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, - IEEE80211_TX_STATUS_ACK = 1<<1, - IEEE80211_TX_STATUS_AMPDU = 1<<2, -}; - -/** - * struct ieee80211_tx_status - transmit status - * - * As much information as possible should be provided for each transmitted - * frame with ieee80211_tx_status(). - * - * @control: a copy of the &struct ieee80211_tx_control passed to the driver - * in the tx() callback. - * @flags: transmit status flags, defined above - * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged - * @ampdu_ack_len: number of aggregated frames. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ampdu_ack_map: block ack bit map for the aggregation. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ack_signal: signal strength of the ACK frame - * @queue_length: ?? REMOVE - * @queue_number: ?? REMOVE - */ -struct ieee80211_tx_status { - struct ieee80211_tx_control control; - u8 flags; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; - u64 ampdu_ack_map; - int ack_signal; - int queue_length; - int queue_number; -}; - -/** * enum ieee80211_conf_flags - configuration flags * * Flags to define PHY configuration options @@ -433,11 +419,13 @@ struct ieee80211_tx_status { * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported) + * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0), IEEE80211_CONF_RADIOTAP = (1<<1), IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2), + IEEE80211_CONF_PS = (1<<3), }; /** @@ -553,34 +541,38 @@ struct ieee80211_if_init_conf { }; /** + * enum ieee80211_if_conf_change - interface config change flags + * + * @IEEE80211_IFCC_BSSID: The BSSID changed. + * @IEEE80211_IFCC_SSID: The SSID changed. + * @IEEE80211_IFCC_BEACON: The beacon for this interface changed + * (currently AP and MESH only), use ieee80211_beacon_get(). + */ +enum ieee80211_if_conf_change { + IEEE80211_IFCC_BSSID = BIT(0), + IEEE80211_IFCC_SSID = BIT(1), + IEEE80211_IFCC_BEACON = BIT(2), +}; + +/** * struct ieee80211_if_conf - configuration of an interface * - * @type: type of the interface. This is always the same as was specified in - * &struct ieee80211_if_init_conf. The type of an interface never changes - * during the life of the interface; this field is present only for - * convenience. + * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. * @bssid: BSSID of the network we are associated to/creating. * @ssid: used (together with @ssid_len) by drivers for hardware that * generate beacons independently. The pointer is valid only during the * config_interface() call, so copy the value somewhere if you need * it. * @ssid_len: length of the @ssid field. - * @beacon: beacon template. Valid only if @host_gen_beacon_template in - * &struct ieee80211_hw is set. The driver is responsible of freeing - * the sk_buff. - * @beacon_control: tx_control for the beacon template, this field is only - * valid when the @beacon field was set. * * This structure is passed to the config_interface() callback of * &struct ieee80211_hw. */ struct ieee80211_if_conf { - int type; + u32 changed; u8 *bssid; u8 *ssid; size_t ssid_len; - struct sk_buff *beacon; - struct ieee80211_tx_control *beacon_control; }; /** @@ -597,8 +589,8 @@ enum ieee80211_key_alg { /** * enum ieee80211_key_len - key length - * @WEP40: WEP 5 byte long key - * @WEP104: WEP 13 byte long key + * @LEN_WEP40: WEP 5-byte long key + * @LEN_WEP104: WEP 13-byte long key */ enum ieee80211_key_len { LEN_WEP40 = 5, @@ -619,11 +611,14 @@ enum ieee80211_key_len { * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by * the driver for a TKIP key if it requires Michael MIC * generation in software. + * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates + * that the key is pairwise rather then a shared key. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_WMM_STA = 1<<0, IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, + IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, }; /** @@ -639,7 +634,12 @@ enum ieee80211_key_flags { * @flags: key flags, see &enum ieee80211_key_flags. * @keyidx: the key index (0-3) * @keylen: key material length - * @key: key material + * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte) + * data block: + * - Temporal Encryption Key (128 bits) + * - Temporal Authenticator Tx MIC Key (64 bits) + * - Temporal Authenticator Rx MIC Key (64 bits) + * */ struct ieee80211_key_conf { enum ieee80211_key_alg alg; @@ -667,7 +667,7 @@ enum set_key_cmd { * enum sta_notify_cmd - sta notify command * * Used with the sta_notify() callback in &struct ieee80211_ops, this - * indicates addition and removal of a station to station table + * indicates addition and removal of a station to station table. * * @STA_NOTIFY_ADD: a station was added to the station table * @STA_NOTIFY_REMOVE: a station being removed from the station table @@ -700,15 +700,6 @@ enum ieee80211_tkip_key_type { * any particular flags. There are some exceptions to this rule, * however, so you are advised to review these flags carefully. * - * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE: - * The device only needs to be supplied with a beacon template. - * If you need the host to generate each beacon then don't use - * this flag and call ieee80211_beacon_get() when you need the - * next beacon frame. Note that if you set this flag, you must - * implement the set_tim() callback for powersave mode to work - * properly. - * This flag is only relevant for access-point mode. - * * @IEEE80211_HW_RX_INCLUDES_FCS: * Indicates that received frames passed to the stack include * the FCS at the end. @@ -730,6 +721,29 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE: * Hardware is not capable of receiving frames with short preamble on * the 2.4 GHz band. + * + * @IEEE80211_HW_SIGNAL_UNSPEC: + * Hardware can provide signal values but we don't know its units. We + * expect values between 0 and @max_signal. + * If possible please provide dB or dBm instead. + * + * @IEEE80211_HW_SIGNAL_DB: + * Hardware gives signal values in dB, decibel difference from an + * arbitrary, fixed reference. We expect values between 0 and @max_signal. + * If possible please provide dBm instead. + * + * @IEEE80211_HW_SIGNAL_DBM: + * Hardware gives signal values in dBm, decibel difference from + * one milliwatt. This is the preferred method since it is standardized + * between different devices. @max_signal does not need to be set. + * + * @IEEE80211_HW_NOISE_DBM: + * Hardware can provide noise (radio interference) values in units dBm, + * decibel difference from one milliwatt. + * + * @IEEE80211_HW_SPECTRUM_MGMT: + * Hardware supports spectrum management defined in 802.11h + * Measurement, Channel Switch, Quieting, TPC */ enum ieee80211_hw_flags { IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, @@ -737,6 +751,11 @@ enum ieee80211_hw_flags { IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, + IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, + IEEE80211_HW_SIGNAL_DB = 1<<6, + IEEE80211_HW_SIGNAL_DBM = 1<<7, + IEEE80211_HW_NOISE_DBM = 1<<8, + IEEE80211_HW_SPECTRUM_MGMT = 1<<9, }; /** @@ -754,8 +773,11 @@ enum ieee80211_hw_flags { * @conf: &struct ieee80211_conf, device configuration, don't use. * * @workqueue: single threaded workqueue available for driver use, - * allocated by mac80211 on registration and flushed on - * unregistration. + * allocated by mac80211 on registration and flushed when an + * interface is removed. + * NOTICE: All work performed on this workqueue should NEVER + * acquire the RTNL lock (i.e. Don't use the function + * ieee80211_iterate_active_interfaces()) * * @priv: pointer to private area that was allocated for driver use * along with this structure. @@ -767,15 +789,18 @@ enum ieee80211_hw_flags { * * @channel_change_time: time (in microseconds) it takes to change channels. * - * @max_rssi: Maximum value for ssi in RX information, use - * negative numbers for dBm and 0 to indicate no support. - * - * @max_signal: like @max_rssi, but for the signal value. - * - * @max_noise: like @max_rssi, but for the noise value. + * @max_signal: Maximum value for signal (rssi) in RX information, used + * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB * * @queues: number of available hardware transmit queues for - * data packets. WMM/QoS requires at least four. + * data packets. WMM/QoS requires at least four, these + * queues need to have configurable access parameters. + * + * @ampdu_queues: number of available hardware transmit queues + * for A-MPDU packets, these have no access parameters + * because they're used only for A-MPDU frames. Note that + * mac80211 will not currently use any of the regular queues + * for aggregation. * * @rate_control_algorithm: rate control algorithm for this hardware. * If unset (NULL), the default algorithm will be used. Must be @@ -794,10 +819,8 @@ struct ieee80211_hw { unsigned int extra_tx_headroom; int channel_change_time; int vif_data_size; - u8 queues; - s8 max_rssi; + u16 queues, ampdu_queues; s8 max_signal; - s8 max_noise; }; /** @@ -822,6 +845,43 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } +static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) +{ + return hw->queues; +} + +static inline int ieee80211_num_queues(struct ieee80211_hw *hw) +{ + return hw->queues + hw->ampdu_queues; +} + +static inline struct ieee80211_rate * +ieee80211_get_tx_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c) +{ + if (WARN_ON(c->tx_rate_idx < 0)) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c) +{ + if (c->control.rts_cts_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_info *c) +{ + if (c->control.alt_retry_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx]; +} + /** * DOC: Hardware crypto acceleration * @@ -979,8 +1039,10 @@ enum ieee80211_ampdu_mlme_action { * @tx: Handler that 802.11 module calls for each transmitted frame. * skb contains the buffer starting from the IEEE 802.11 header. * The low-level driver should send the frame out based on - * configuration in the TX control data. Must be implemented and - * atomic. + * configuration in the TX control data. This handler should, + * preferably, never fail and stop queues appropriately, more + * importantly, however, it must never fail for A-MPDU-queues. + * Must be implemented and atomic. * * @start: Called before the first netdevice attached to the hardware * is enabled. This should turn on the hardware and must turn on @@ -1072,15 +1134,13 @@ enum ieee80211_ampdu_mlme_action { * of assocaited station or AP. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), - * bursting) for a hardware TX queue. The @queue parameter uses the - * %IEEE80211_TX_QUEUE_* constants. Must be atomic. + * bursting) for a hardware TX queue. Must be atomic. * * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue * size (limit), and total number of packets sent using each TX queue - * (count). This information is used for WMM to find out which TX - * queues have room for more packets and by hostapd to provide - * statistics about the current queueing state to external programs. + * (count). The 'stats' pointer points to an array that has hw->queues + + * hw->ampdu_queues items. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, * this is only used for IBSS mode debugging and, as such, is not a @@ -1091,17 +1151,6 @@ enum ieee80211_ampdu_mlme_action { * function is optional if the firmware/hardware takes full care of * TSF synchronization. * - * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point, - * IBSS uses a fixed beacon frame which is configured using this - * function. - * If the driver returns success (0) from this callback, it owns - * the skb. That means the driver is responsible to kfree_skb() it. - * The control structure is not dynamically allocated. That means the - * driver does not own the pointer and if it needs it somewhere - * outside of the context of this function, it must copy it - * somewhere else. - * This handler is required only for IBSS mode. - * * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. * This is needed only for IBSS mode and the result of this function is * used to determine whether to reply to Probe Requests. @@ -1116,8 +1165,7 @@ enum ieee80211_ampdu_mlme_action { * that TX/RX_STOP can pass NULL for this parameter. */ struct ieee80211_ops { - int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); int (*add_interface)(struct ieee80211_hw *hw, @@ -1154,15 +1202,12 @@ struct ieee80211_ops { u32 short_retry, u32 long_retr); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, const u8 *addr); - int (*conf_tx)(struct ieee80211_hw *hw, int queue, + int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); int (*get_tx_stats)(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats); u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); - int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, @@ -1292,7 +1337,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw); * * This function frees everything that was allocated, including the * private data for the driver. You must call ieee80211_unregister_hw() - * before calling this function + * before calling this function. * * @hw: the hardware to free */ @@ -1358,16 +1403,12 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** - * ieee80211_tx_status_irqsafe - irq-safe transmit status callback + * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback * * Like ieee80211_tx_status() but can be called in IRQ context * (internally defers to a tasklet.) @@ -1377,13 +1418,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_beacon_get - beacon generation function @@ -1399,8 +1436,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * is responsible of freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); + struct ieee80211_vif *vif); /** * ieee80211_rts_get - RTS frame generation function @@ -1408,7 +1444,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @rts: The buffer where to store the RTS frame. * * If the RTS frames are generated by the host system (i.e., not in @@ -1418,7 +1454,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, */ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_rts *rts); /** @@ -1426,7 +1462,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the RTS. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1434,7 +1470,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_ctstoself_get - CTS-to-self frame generation function @@ -1442,7 +1478,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @cts: The buffer where to store the CTS-to-self frame. * * If the CTS-to-self frames are generated by the host system (i.e., not in @@ -1453,7 +1489,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_cts *cts); /** @@ -1461,7 +1497,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1470,7 +1506,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame @@ -1509,8 +1545,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * use common code for all beacons. */ struct sk_buff * -ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** * ieee80211_get_hdrlen_from_skb - get header length from data @@ -1522,7 +1557,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * * @skb: the frame */ -int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_get_hdrlen - get header length from frame control @@ -1535,6 +1570,12 @@ int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); int ieee80211_get_hdrlen(u16 fc); /** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int ieee80211_hdrlen(__le16 fc); + +/** * ieee80211_get_tkip_key - get a TKIP rc4 for skb * * This function computes a TKIP rc4 key for an skb. It computes @@ -1545,6 +1586,8 @@ int ieee80211_get_hdrlen(u16 fc); * @keyconf: the parameter passed with the set key * @skb: the skb for which the key is needed * @rc4key: a buffer to which the key will be written + * @type: TBD + * @key: TBD */ void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, struct sk_buff *skb, @@ -1568,14 +1611,6 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); /** - * ieee80211_start_queues - start all queues - * @hw: pointer to as obtained from ieee80211_alloc_hw(). - * - * Drivers should use this function instead of netif_start_queue. - */ -void ieee80211_start_queues(struct ieee80211_hw *hw); - -/** * ieee80211_stop_queues - stop all queues * @hw: pointer as obtained from ieee80211_alloc_hw(). * @@ -1603,7 +1638,7 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw); void ieee80211_scan_completed(struct ieee80211_hw *hw); /** - * ieee80211_iterate_active_interfaces- iterate active interfaces + * ieee80211_iterate_active_interfaces - iterate active interfaces * * This function iterates over the interfaces associated with a given * hardware that are currently active and calls the callback for them. @@ -1670,7 +1705,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); * * This function must be called by low level driver once it has * finished with preparations for the BA session. - * This version of the function is irq safe. + * This version of the function is IRQ-safe. */ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); @@ -1710,7 +1745,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); * * This function must be called by low level driver once it has * finished with preparations for the BA session tear down. - * This version of the function is irq safe. + * This version of the function is IRQ-safe. */ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); @@ -1718,7 +1753,7 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, /** * ieee80211_notify_mac - low level driver notification * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @notification_types: enum ieee80211_notification_types + * @notif_type: enum ieee80211_notification_types * * This function must be called by low level driver to inform mac80211 of * low level driver status change or force mac80211 to re-assoc for low |
