diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 296 |
1 files changed, 227 insertions, 69 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 2fd06c6..2a7936d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -25,6 +25,43 @@ #include <linux/wireless.h> +/** + * DOC: Introduction + * + * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges + * userspace and drivers, and offers some utility functionality associated + * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used + * by all modern wireless drivers in Linux, so that they offer a consistent + * API through nl80211. For backward compatibility, cfg80211 also offers + * wireless extensions to userspace, but hides them from drivers completely. + * + * Additionally, cfg80211 contains code to help enforce regulatory spectrum + * use restrictions. + */ + + +/** + * DOC: Device registration + * + * In order for a driver to use cfg80211, it must register the hardware device + * with cfg80211. This happens through a number of hardware capability structs + * described below. + * + * The fundamental structure for each device is the 'wiphy', of which each + * instance describes a physical wireless device connected to the system. Each + * such wiphy can have zero, one, or many virtual interfaces associated with + * it, which need to be identified as such by pointing the network interface's + * @ieee80211_ptr pointer to a &struct wireless_dev which further describes + * the wireless part of the interface, normally this struct is embedded in the + * network interface's private data area. Drivers can optionally allow creating + * or destroying virtual interfaces on the fly, but without at least one or the + * ability to create some the wireless device isn't useful. + * + * Each wiphy structure contains device capability information, and also has + * a pointer to the various operations the driver offers. The definitions and + * structures here describe these capabilities in detail. + */ + /* * wireless hardware capability structures */ @@ -205,6 +242,21 @@ struct ieee80211_supported_band { */ /** + * DOC: Actions and configuration + * + * Each wireless device and each virtual interface offer a set of configuration + * operations and other actions that are invoked by userspace. Each of these + * actions is described in the operations structure, and the parameters these + * operations use are described separately. + * + * Additionally, some operations are asynchronous and expect to get status + * information via some functions that drivers need to call. + * + * Scanning and BSS list handling with its associated functionality is described + * in a separate chapter. + */ + +/** * struct vif_params - describes virtual interface parameters * @mesh_id: mesh ID to use * @mesh_id_len: length of the mesh ID @@ -241,12 +293,24 @@ struct key_params { * enum survey_info_flags - survey information flags * * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in + * @SURVEY_INFO_IN_USE: channel is currently being used + * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in + * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in + * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in + * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in + * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in * * Used by the driver to indicate which info in &struct survey_info * it has filled in during the get_survey(). */ enum survey_info_flags { SURVEY_INFO_NOISE_DBM = 1<<0, + SURVEY_INFO_IN_USE = 1<<1, + SURVEY_INFO_CHANNEL_TIME = 1<<2, + SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3, + SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4, + SURVEY_INFO_CHANNEL_TIME_RX = 1<<5, + SURVEY_INFO_CHANNEL_TIME_TX = 1<<6, }; /** @@ -256,6 +320,11 @@ enum survey_info_flags { * @filled: bitflag of flags from &enum survey_info_flags * @noise: channel noise in dBm. This and all following fields are * optional + * @channel_time: amount of time in ms the radio spent on the channel + * @channel_time_busy: amount of time the primary channel was sensed busy + * @channel_time_ext_busy: amount of time the extension channel was sensed busy + * @channel_time_rx: amount of time the radio spent receiving data + * @channel_time_tx: amount of time the radio spent transmitting data * * Used by dump_survey() to report back per-channel survey information. * @@ -264,6 +333,11 @@ enum survey_info_flags { */ struct survey_info { struct ieee80211_channel *channel; + u64 channel_time; + u64 channel_time_busy; + u64 channel_time_ext_busy; + u64 channel_time_rx; + u64 channel_time_tx; u32 filled; s8 noise; }; @@ -347,6 +421,9 @@ struct station_parameters { * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_TX_RETRIES: @tx_retries filled + * @STATION_INFO_TX_FAILED: @tx_failed filled + * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -359,6 +436,9 @@ enum station_info_flags { STATION_INFO_TX_BITRATE = 1<<7, STATION_INFO_RX_PACKETS = 1<<8, STATION_INFO_TX_PACKETS = 1<<9, + STATION_INFO_TX_RETRIES = 1<<10, + STATION_INFO_TX_FAILED = 1<<11, + STATION_INFO_RX_DROP_MISC = 1<<12, }; /** @@ -408,6 +488,9 @@ struct rate_info { * @txrate: current unicast bitrate to this station * @rx_packets: packets received from this station * @tx_packets: packets transmitted to this station + * @tx_retries: cumulative retry counts + * @tx_failed: number of failed transmissions (retries exceeded, no ACK) + * @rx_dropped_misc: Dropped for un-specified reason. * @generation: generation number for nl80211 dumps. * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that @@ -425,6 +508,9 @@ struct station_info { struct rate_info txrate; u32 rx_packets; u32 tx_packets; + u32 tx_retries; + u32 tx_failed; + u32 rx_dropped_misc; int generation; }; @@ -570,8 +656,28 @@ struct ieee80211_txq_params { /* from net/wireless.h */ struct wiphy; -/* from net/ieee80211.h */ -struct ieee80211_channel; +/** + * DOC: Scanning and BSS list handling + * + * The scanning process itself is fairly simple, but cfg80211 offers quite + * a bit of helper functionality. To start a scan, the scan operation will + * be invoked with a scan definition. This scan definition contains the + * channels to scan, and the SSIDs to send probe requests for (including the + * wildcard, if desired). A passive scan is indicated by having no SSIDs to + * probe. Additionally, a scan request may contain extra information elements + * that should be added to the probe request. The IEs are guaranteed to be + * well-formed, and will not exceed the maximum length the driver advertised + * in the wiphy structure. + * + * When scanning finds a BSS, cfg80211 needs to be notified of that, because + * it is responsible for maintaining the BSS list; the driver should not + * maintain a list itself. For this notification, various functions exist. + * + * Since drivers do not maintain a BSS list, there are also a number of + * functions to search for a BSS and obtain information about it from the + * BSS structure cfg80211 maintains. The BSS list is also made available + * to userspace. + */ /** * struct cfg80211_ssid - SSID description @@ -691,6 +797,10 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is * required to assume that the port is unauthorized until authorized by * user space. Otherwise, port is marked authorized by default. + * @control_port_ethertype: the control port protocol that should be + * allowed through even on unauthorized ports + * @control_port_no_encrypt: TRUE to prevent encryption of control port + * protocol frames. */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -700,6 +810,8 @@ struct cfg80211_crypto_settings { int n_akm_suites; u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; bool control_port; + __be16 control_port_ethertype; + bool control_port_no_encrypt; }; /** @@ -1020,7 +1132,7 @@ struct cfg80211_pmksa { * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. * This allows the operation to be terminated prior to timeout based on * the duration value. - * @action: Transmit an action frame + * @mgmt_tx: Transmit a management frame * * @testmode_cmd: run a test mode command * @@ -1035,6 +1147,9 @@ struct cfg80211_pmksa { * allows the driver to adjust the dynamic ps timeout value. * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. * + * @mgmt_frame_register: Notify driver that a management frame type was + * registered. Note that this callback may not sleep, and cannot run + * concurrently with itself. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -1050,13 +1165,14 @@ struct cfg80211_ops { struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, const u8 *mac_addr, + u8 key_index, bool pairwise, const u8 *mac_addr, struct key_params *params); int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, const u8 *mac_addr, void *cookie, + u8 key_index, bool pairwise, const u8 *mac_addr, + void *cookie, void (*callback)(void *cookie, struct key_params*)); int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, const u8 *mac_addr); + u8 key_index, bool pairwise, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); @@ -1140,7 +1256,7 @@ struct cfg80211_ops { int (*get_tx_power)(struct wiphy *wiphy, int *dbm); int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, - u8 *addr); + const u8 *addr); void (*rfkill_poll)(struct wiphy *wiphy); @@ -1172,7 +1288,7 @@ struct cfg80211_ops { struct net_device *dev, u64 cookie); - int (*action)(struct wiphy *wiphy, struct net_device *dev, + int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type, bool channel_type_valid, @@ -1184,6 +1300,10 @@ struct cfg80211_ops { int (*set_cqm_rssi_config)(struct wiphy *wiphy, struct net_device *dev, s32 rssi_thold, u32 rssi_hyst); + + void (*mgmt_frame_register)(struct wiphy *wiphy, + struct net_device *dev, + u16 frame_type, bool reg); }; /* @@ -1221,21 +1341,31 @@ struct cfg80211_ops { * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station * on a VLAN interface) * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the + * control port protocol ethertype. The device also honours the + * control_port_no_encrypt flag. + * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. */ enum wiphy_flags { - WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), - WIPHY_FLAG_STRICT_REGULATORY = BIT(1), - WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), - WIPHY_FLAG_NETNS_OK = BIT(3), - WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), - WIPHY_FLAG_4ADDR_AP = BIT(5), - WIPHY_FLAG_4ADDR_STATION = BIT(6), + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), + WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), + WIPHY_FLAG_IBSS_RSN = BIT(7), }; struct mac_address { u8 addr[ETH_ALEN]; }; +struct ieee80211_txrx_stypes { + u16 tx, rx; +}; + /** * struct wiphy - wireless hardware description * @reg_notifier: the driver's regulatory notification callback @@ -1286,6 +1416,10 @@ struct mac_address { * @privid: a pointer that drivers can use to identify if an arbitrary * wiphy is theirs, e.g. in global notifiers * @bands: information about bands/channels supported by this device + * + * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or + * transmitted through nl80211, points to an array indexed by interface + * type */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1294,9 +1428,12 @@ struct wiphy { u8 perm_addr[ETH_ALEN]; u8 addr_mask[ETH_ALEN]; - u16 n_addresses; struct mac_address *addresses; + const struct ieee80211_txrx_stypes *mgmt_stypes; + + u16 n_addresses; + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; @@ -1492,8 +1629,8 @@ struct cfg80211_cached_keys; * set by driver (if supported) on add_interface BEFORE registering the * netdev and may otherwise be used by driver read-only, will be update * by cfg80211 on change_interface - * @action_registrations: list of registrations for action frames - * @action_registrations_lock: lock for the list + * @mgmt_registrations: list of registrations for management frames + * @mgmt_registrations_lock: lock for the list * @mtx: mutex used to lock data in this struct * @cleanup_work: work struct used for cleanup that can't be done directly */ @@ -1505,8 +1642,8 @@ struct wireless_dev { struct list_head list; struct net_device *netdev; - struct list_head action_registrations; - spinlock_t action_registrations_lock; + struct list_head mgmt_registrations; + spinlock_t mgmt_registrations_lock; struct mutex mtx; @@ -1563,8 +1700,10 @@ static inline void *wdev_priv(struct wireless_dev *wdev) return wiphy_priv(wdev->wiphy); } -/* - * Utility functions +/** + * DOC: Utility functions + * + * cfg80211 offers a number of utility functions that can be useful. */ /** @@ -1715,7 +1854,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format */ -unsigned int ieee80211_hdrlen(__le16 fc); +unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); + +/** + * DOC: Data path helpers + * + * In addition to generic utilities, cfg80211 also offers + * functions that help implement the data path for devices + * that do not do the 802.11/802.3 conversion on the device. + */ /** * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 @@ -1777,8 +1924,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); */ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); -/* - * Regulatory helper functions for wiphys +/** + * DOC: Regulatory enforcement infrastructure + * + * TODO */ /** @@ -2181,6 +2330,20 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); /** + * DOC: RFkill integration + * + * RFkill integration in cfg80211 is almost invisible to drivers, + * as cfg80211 automatically registers an rfkill instance for each + * wireless device it knows about. Soft kill is also translated + * into disconnecting and turning all interfaces off, drivers are + * expected to turn off the device when all interfaces are down. + * + * However, devices may have a hard RFkill line, in which case they + * also need to interact with the rfkill subsystem, via cfg80211. + * They can do this with a few helper functions documented here. + */ + +/** * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state * @wiphy: the wiphy * @blocked: block status @@ -2201,6 +2364,17 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); #ifdef CONFIG_NL80211_TESTMODE /** + * DOC: Test mode + * + * Test mode is a set of utility functions to allow drivers to + * interact with driver-specific tools to aid, for instance, + * factory programming. + * + * This chapter describes how drivers interact with it, for more + * information see the nl80211 book's chapter on it. + */ + +/** * cfg80211_testmode_alloc_reply_skb - allocate testmode reply * @wiphy: the wiphy * @approxlen: an upper bound of the length of the data that will @@ -2373,38 +2547,39 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, struct station_info *sinfo, gfp_t gfp); /** - * cfg80211_rx_action - notification of received, unprocessed Action frame + * cfg80211_rx_mgmt - notification of received, unprocessed management frame * @dev: network device * @freq: Frequency on which the frame was received in MHz - * @buf: Action frame (header + body) + * @buf: Management frame (header + body) * @len: length of the frame data * @gfp: context flags - * Returns %true if a user space application is responsible for rejecting the - * unrecognized Action frame; %false if no such application is registered - * (i.e., the driver is responsible for rejecting the unrecognized Action - * frame) + * + * Returns %true if a user space application has registered for this frame. + * For action frames, that makes it responsible for rejecting unrecognized + * action frames; %false otherwise, in which case for action frames the + * driver is responsible for rejecting the frame. * * This function is called whenever an Action frame is received for a station * mode interface, but is not processed in kernel. */ -bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf, - size_t len, gfp_t gfp); +bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf, + size_t len, gfp_t gfp); /** - * cfg80211_action_tx_status - notification of TX status for Action frame + * cfg80211_mgmt_tx_status - notification of TX status for management frame * @dev: network device - * @cookie: Cookie returned by cfg80211_ops::action() - * @buf: Action frame (header + body) + * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() + * @buf: Management frame (header + body) * @len: length of the frame data * @ack: Whether frame was acknowledged * @gfp: context flags * - * This function is called whenever an Action frame was requested to be - * transmitted with cfg80211_ops::action() to report the TX status of the + * This function is called whenever a management frame was requested to be + * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the * transmission attempt. */ -void cfg80211_action_tx_status(struct net_device *dev, u64 cookie, - const u8 *buf, size_t len, bool ack, gfp_t gfp); +void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie, + const u8 *buf, size_t len, bool ack, gfp_t gfp); /** @@ -2420,56 +2595,41 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); -#ifdef __KERNEL__ - /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ #define wiphy_printk(level, wiphy, format, args...) \ - printk(level "%s: " format, wiphy_name(wiphy), ##args) + dev_printk(level, &(wiphy)->dev, format, ##args) #define wiphy_emerg(wiphy, format, args...) \ - wiphy_printk(KERN_EMERG, wiphy, format, ##args) + dev_emerg(&(wiphy)->dev, format, ##args) #define wiphy_alert(wiphy, format, args...) \ - wiphy_printk(KERN_ALERT, wiphy, format, ##args) + dev_alert(&(wiphy)->dev, format, ##args) #define wiphy_crit(wiphy, format, args...) \ - wiphy_printk(KERN_CRIT, wiphy, format, ##args) + dev_crit(&(wiphy)->dev, format, ##args) #define wiphy_err(wiphy, format, args...) \ - wiphy_printk(KERN_ERR, wiphy, format, ##args) + dev_err(&(wiphy)->dev, format, ##args) #define wiphy_warn(wiphy, format, args...) \ - wiphy_printk(KERN_WARNING, wiphy, format, ##args) + dev_warn(&(wiphy)->dev, format, ##args) #define wiphy_notice(wiphy, format, args...) \ - wiphy_printk(KERN_NOTICE, wiphy, format, ##args) + dev_notice(&(wiphy)->dev, format, ##args) #define wiphy_info(wiphy, format, args...) \ - wiphy_printk(KERN_INFO, wiphy, format, ##args) + dev_info(&(wiphy)->dev, format, ##args) -int wiphy_debug(const struct wiphy *wiphy, const char *format, ...) - __attribute__ ((format (printf, 2, 3))); - -#if defined(DEBUG) -#define wiphy_dbg(wiphy, format, args...) \ +#define wiphy_debug(wiphy, format, args...) \ wiphy_printk(KERN_DEBUG, wiphy, format, ##args) -#elif defined(CONFIG_DYNAMIC_DEBUG) + #define wiphy_dbg(wiphy, format, args...) \ - dynamic_pr_debug("%s: " format, wiphy_name(wiphy), ##args) -#else -#define wiphy_dbg(wiphy, format, args...) \ -({ \ - if (0) \ - wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \ - 0; \ -}) -#endif + dev_dbg(&(wiphy)->dev, format, ##args) #if defined(VERBOSE_DEBUG) #define wiphy_vdbg wiphy_dbg #else - #define wiphy_vdbg(wiphy, format, args...) \ ({ \ if (0) \ wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \ - 0; \ + 0; \ }) #endif @@ -2481,6 +2641,4 @@ int wiphy_debug(const struct wiphy *wiphy, const char *format, ...) #define wiphy_WARN(wiphy, format, args...) \ WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args); -#endif - #endif /* __NET_CFG80211_H */ |
