summaryrefslogtreecommitdiffstats
path: root/include/net/cfg80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r--include/net/cfg80211.h198
1 files changed, 158 insertions, 40 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3d874c6..0884b9a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -206,10 +206,12 @@ struct ieee80211_supported_band {
* struct vif_params - describes virtual interface parameters
* @mesh_id: mesh ID to use
* @mesh_id_len: length of the mesh ID
+ * @use_4addr: use 4-address frames
*/
struct vif_params {
u8 *mesh_id;
int mesh_id_len;
+ int use_4addr;
};
/**
@@ -233,6 +235,35 @@ struct key_params {
};
/**
+ * enum survey_info_flags - survey information flags
+ *
+ * Used by the driver to indicate which info in &struct survey_info
+ * it has filled in during the get_survey().
+ */
+enum survey_info_flags {
+ SURVEY_INFO_NOISE_DBM = 1<<0,
+};
+
+/**
+ * struct survey_info - channel survey response
+ *
+ * Used by dump_survey() to report back per-channel survey information.
+ *
+ * @channel: the channel this survey record reports, mandatory
+ * @filled: bitflag of flags from &enum survey_info_flags
+ * @noise: channel noise in dBm. This and all following fields are
+ * optional
+ *
+ * This structure can later be expanded with things like
+ * channel duty cycle etc.
+ */
+struct survey_info {
+ struct ieee80211_channel *channel;
+ u32 filled;
+ s8 noise;
+};
+
+/**
* struct beacon_parameters - beacon parameters
*
* Used to configure the beacon for an interface.
@@ -418,7 +449,7 @@ enum monitor_flags {
* in during get_station() or dump_station().
*
* MPATH_INFO_FRAME_QLEN: @frame_qlen filled
- * MPATH_INFO_DSN: @dsn filled
+ * MPATH_INFO_SN: @sn filled
* MPATH_INFO_METRIC: @metric filled
* MPATH_INFO_EXPTIME: @exptime filled
* MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
@@ -427,7 +458,7 @@ enum monitor_flags {
*/
enum mpath_info_flags {
MPATH_INFO_FRAME_QLEN = BIT(0),
- MPATH_INFO_DSN = BIT(1),
+ MPATH_INFO_SN = BIT(1),
MPATH_INFO_METRIC = BIT(2),
MPATH_INFO_EXPTIME = BIT(3),
MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4),
@@ -442,7 +473,7 @@ enum mpath_info_flags {
*
* @filled: bitfield of flags from &enum mpath_info_flags
* @frame_qlen: number of queued frames for this destination
- * @dsn: destination sequence number
+ * @sn: target sequence number
* @metric: metric (cost) of this mesh path
* @exptime: expiration time for the mesh path from now, in msecs
* @flags: mesh path flags
@@ -456,7 +487,7 @@ enum mpath_info_flags {
struct mpath_info {
u32 filled;
u32 frame_qlen;
- u32 dsn;
+ u32 sn;
u32 metric;
u32 exptime;
u32 discovery_timeout;
@@ -506,6 +537,7 @@ struct mesh_config {
u32 dot11MeshHWMPactivePathTimeout;
u16 dot11MeshHWMPpreqMinInterval;
u16 dot11MeshHWMPnetDiameterTraversalTime;
+ u8 dot11MeshHWMPRootMode;
};
/**
@@ -839,6 +871,19 @@ struct cfg80211_bitrate_mask {
u32 fixed; /* fixed bitrate, 0 == not fixed */
u32 maxrate; /* in kbps, 0 == no limit */
};
+/**
+ * struct cfg80211_pmksa - PMK Security Association
+ *
+ * This structure is passed to the set/del_pmksa() method for PMKSA
+ * caching.
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: The PMK material itself.
+ */
+struct cfg80211_pmksa {
+ u8 *bssid;
+ u8 *pmkid;
+};
/**
* struct cfg80211_ops - backend description for wireless configuration
@@ -941,7 +986,16 @@ struct cfg80211_bitrate_mask {
* @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
* functions to adjust rfkill hw state
*
+ * @dump_survey: get site survey information.
+ *
* @testmode_cmd: run a test mode command
+ *
+ * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
+ * devices running firmwares capable of generating the (re) association
+ * RSN IE. It allows for faster roaming between WPA2 BSSIDs.
+ * @del_pmksa: Delete a cached PMKID.
+ * @flush_pmksa: Flush all cached PMKIDs.
+ *
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy);
@@ -1060,6 +1114,15 @@ struct cfg80211_ops {
const u8 *peer,
const struct cfg80211_bitrate_mask *mask);
+ int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
+ int idx, struct survey_info *info);
+
+ int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+ struct cfg80211_pmksa *pmksa);
+ int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+ struct cfg80211_pmksa *pmksa);
+ int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+
/* some temporary stuff to finish wext */
int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout);
@@ -1071,27 +1134,50 @@ struct cfg80211_ops {
*/
/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
* has its own custom regulatory domain and cannot identify the
* ISO / IEC 3166 alpha2 it belongs to. When this is enabled
* we will disregard the first regulatory hint (when the
* initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * regulatory domain settings until it gets its own regulatory domain
- * via its regulatory_hint(). After its gets its own regulatory domain
- * it will only allow further regulatory domain settings to further
- * enhance compliance. For example if channel 13 and 14 are disabled
- * by this regulatory domain no user regulatory domain can enable these
- * channels at a later time. This can be used for devices which do not
- * have calibration information gauranteed for frequencies or settings
- * outside of its regulatory domain.
- * @disable_beacon_hints: enable this if your driver needs to ensure that
- * passive scan flags and beaconing flags may not be lifted by cfg80211
- * due to regulatory beacon hints. For more information on beacon
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ * ignore regulatory domain settings until it gets its own regulatory
+ * domain via its regulatory_hint(). After its gets its own regulatory
+ * domain it will only allow further regulatory domain settings to
+ * further enhance compliance. For example if channel 13 and 14 are
+ * disabled by this regulatory domain no user regulatory domain can
+ * enable these channels at a later time. This can be used for devices
+ * which do not have calibration information gauranteed for frequencies
+ * or settings outside of its regulatory domain.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ * that passive scan flags and beaconing flags may not be lifted by
+ * cfg80211 due to regulatory beacon hints. For more information on beacon
* hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ * wiphy at all
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ * by default -- this flag will be set depending on the kernel's default
+ * on wiphy_new(), but can be changed by the driver if it has a good
+ * reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ * on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ */
+enum wiphy_flags {
+ WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
+ WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
+ WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ WIPHY_FLAG_NETNS_OK = BIT(3),
+ WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
+ WIPHY_FLAG_4ADDR_AP = BIT(5),
+ WIPHY_FLAG_4ADDR_STATION = BIT(6),
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
* @reg_notifier: the driver's regulatory notification callback
* @regd: the driver's regulatory domain, if one was requested via
* the regulatory_hint() API. This can be used by the driver
@@ -1106,11 +1192,6 @@ struct cfg80211_ops {
* -1 = fragmentation disabled, only odd values >= 256 used
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
* @net: the network namespace this wiphy currently lives in
- * @netnsok: if set to false, do not allow changing the netns of this
- * wiphy at all
- * @ps_default: default for powersave, will be set depending on the
- * kernel's default on wiphy_new(), but can be changed by the
- * driver if it has a good reason to override the default
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1121,12 +1202,7 @@ struct wiphy {
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
- bool custom_regulatory;
- bool strict_regulatory;
- bool disable_beacon_hints;
-
- bool netnsok;
- bool ps_default;
+ u32 flags;
enum cfg80211_signal_type signal_type;
@@ -1142,6 +1218,11 @@ struct wiphy {
u32 frag_threshold;
u32 rts_threshold;
+ char fw_version[ETHTOOL_BUSINFO_LEN];
+ u32 hw_version;
+
+ u8 max_num_pmkids;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
@@ -1171,6 +1252,10 @@ struct wiphy {
struct net *_net;
#endif
+#ifdef CONFIG_CFG80211_WEXT
+ const struct iw_handler_def *wext;
+#endif
+
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
};
@@ -1314,6 +1399,10 @@ struct cfg80211_cached_keys;
* @ssid_len: (private) Used by the internal configuration code
* @wext: (private) Used by the internal wireless extensions compat code
* @wext_bssid: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ * set by driver (if supported) on add_interface BEFORE registering the
+ * netdev and may otherwise be used by driver read-only, will be update
+ * by cfg80211 on change_interface
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -1327,6 +1416,8 @@ struct wireless_dev {
struct work_struct cleanup_work;
+ bool use_4addr;
+
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
@@ -1345,7 +1436,7 @@ struct wireless_dev {
struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
struct cfg80211_internal_bss *current_bss; /* associated / joined */
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
/* wext data */
struct {
struct cfg80211_ibss_params ibss;
@@ -1776,6 +1867,18 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
/**
+ * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * When a pending authentication had no action yet, the driver may decide
+ * to not send a deauth frame, but in that case must calls this function
+ * to tell cfg80211 about this decision. It is only valid to call this
+ * function within the deauth() callback.
+ */
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
+
+/**
* cfg80211_send_rx_assoc - notification of processed association
* @dev: network device
* @buf: (re)association response frame (header + body)
@@ -1802,30 +1905,45 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
- * @cookie: cookie from ->deauth if called within that callback,
- * %NULL otherwise
*
* This function is called whenever deauthentication has been processed in
* station mode. This includes both received deauthentication frames and
* locally generated ones. This function may sleep.
*/
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
- void *cookie);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
/**
* cfg80211_send_disassoc - notification of processed disassociation
* @dev: network device
* @buf: disassociation response frame (header + body)
* @len: length of the frame data
- * @cookie: cookie from ->disassoc if called within that callback,
- * %NULL otherwise
*
* This function is called whenever disassociation has been processed in
* station mode. This includes both received disassociation frames and locally
* generated ones. This function may sleep.
*/
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
- void *cookie);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
+ size_t len);
/**
* cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
OpenPOWER on IntegriCloud