diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 241 |
1 files changed, 203 insertions, 38 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a2ddcf2..4ebb816 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -319,9 +319,12 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames - * @macaddr: address to use for this virtual interface. This will only - * be used for non-netdevice interfaces. If this parameter is set - * to zero address the driver may determine the address as needed. + * @macaddr: address to use for this virtual interface. + * If this parameter is set to zero address the driver may + * determine the address as needed. + * This feature is only fully supported by drivers that enable the + * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating + ** only p2p devices with specified MAC. */ struct vif_params { int use_4addr; @@ -799,6 +802,22 @@ struct station_parameters { }; /** + * struct station_del_parameters - station deletion parameters + * + * Used to delete a station entry (or all stations). + * + * @mac: MAC address of the station to remove or NULL to remove all stations + * @subtype: Management frame subtype to use for indicating removal + * (10 = Disassociation, 12 = Deauthentication) + * @reason_code: Reason code for the Disassociation/Deauthentication frame + */ +struct station_del_parameters { + const u8 *mac; + u8 subtype; + u16 reason_code; +}; + +/** * enum cfg80211_station_type - the type of station being modified * @CFG80211_STA_AP_CLIENT: client of an AP interface * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has @@ -1340,6 +1359,16 @@ struct mesh_setup { }; /** + * struct ocb_setup - 802.11p OCB mode setup configuration + * @chandef: defines the channel to use + * + * These parameters are fixed when connecting to the network + */ +struct ocb_setup { + struct cfg80211_chan_def chandef; +}; + +/** * struct ieee80211_txq_params - TX queue parameters * @ac: AC identifier * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled @@ -1408,6 +1437,10 @@ struct cfg80211_ssid { * @aborted: (internal) scan request was notified as aborted * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band + * @mac_addr: MAC address used with randomisation + * @mac_addr_mask: MAC address mask used with randomisation, bits that + * are 0 in the mask should be randomised, bits that are 1 should + * be taken from the @mac_addr */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -1422,6 +1455,9 @@ struct cfg80211_scan_request { struct wireless_dev *wdev; + u8 mac_addr[ETH_ALEN] __aligned(2); + u8 mac_addr_mask[ETH_ALEN] __aligned(2); + /* internal */ struct wiphy *wiphy; unsigned long scan_start; @@ -1432,6 +1468,17 @@ struct cfg80211_scan_request { struct ieee80211_channel *channels[0]; }; +static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) +{ + int i; + + get_random_bytes(buf, ETH_ALEN); + for (i = 0; i < ETH_ALEN; i++) { + buf[i] &= ~mask[i]; + buf[i] |= addr[i] & mask[i]; + } +} + /** * struct cfg80211_match_set - sets of attributes to match * @@ -1465,6 +1512,10 @@ struct cfg80211_match_set { * @channels: channels to scan * @min_rssi_thold: for drivers only supporting a single threshold, this * contains the minimum over all matchsets + * @mac_addr: MAC address used with randomisation + * @mac_addr_mask: MAC address mask used with randomisation, bits that + * are 0 in the mask should be randomised, bits that are 1 should + * be taken from the @mac_addr */ struct cfg80211_sched_scan_request { struct cfg80211_ssid *ssids; @@ -1479,6 +1530,9 @@ struct cfg80211_sched_scan_request { int n_match_sets; s32 min_rssi_thold; + u8 mac_addr[ETH_ALEN] __aligned(2); + u8 mac_addr_mask[ETH_ALEN] __aligned(2); + /* internal */ struct wiphy *wiphy; struct net_device *dev; @@ -1911,6 +1965,7 @@ struct cfg80211_wowlan_tcp { * @rfkill_release: wake up when rfkill is released * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. * NULL if not configured. + * @nd_config: configuration for the scan to be used for net detect wake. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, @@ -1919,6 +1974,7 @@ struct cfg80211_wowlan { struct cfg80211_pkt_pattern *patterns; struct cfg80211_wowlan_tcp *tcp; int n_patterns; + struct cfg80211_sched_scan_request *nd_config; }; /** @@ -1951,6 +2007,35 @@ struct cfg80211_coalesce { }; /** + * struct cfg80211_wowlan_nd_match - information about the match + * + * @ssid: SSID of the match that triggered the wake up + * @n_channels: Number of channels where the match occurred. This + * value may be zero if the driver can't report the channels. + * @channels: center frequencies of the channels where a match + * occurred (in MHz) + */ +struct cfg80211_wowlan_nd_match { + struct cfg80211_ssid ssid; + int n_channels; + u32 channels[]; +}; + +/** + * struct cfg80211_wowlan_nd_info - net detect wake up information + * + * @n_matches: Number of match information instances provided in + * @matches. This value may be zero if the driver can't provide + * match information. + * @matches: Array of pointers to matches containing information about + * the matches that triggered the wake up. + */ +struct cfg80211_wowlan_nd_info { + int n_matches; + struct cfg80211_wowlan_nd_match *matches[]; +}; + +/** * struct cfg80211_wowlan_wakeup - wakeup report * @disconnect: woke up by getting disconnected * @magic_pkt: woke up by receiving magic packet @@ -1969,6 +2054,7 @@ struct cfg80211_coalesce { * @tcp_match: TCP wakeup packet received * @tcp_connlost: TCP connection lost or failed to establish * @tcp_nomoretokens: TCP data ran out of tokens + * @net_detect: if not %NULL, woke up because of net detect */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, @@ -1978,6 +2064,7 @@ struct cfg80211_wowlan_wakeup { s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; + struct cfg80211_wowlan_nd_info *net_detect; }; /** @@ -2132,7 +2219,7 @@ struct cfg80211_qos_map { * @stop_ap: Stop being an AP, including stopping beaconing. * * @add_station: Add a new station. - * @del_station: Remove a station; @mac may be NULL to remove all stations. + * @del_station: Remove a station * @change_station: Modify a given station. Note that flags changes are not much * validated in cfg80211, in particular the auth/assoc/authorized flags * might come to the driver in invalid combinations -- make sure to check @@ -2146,6 +2233,8 @@ struct cfg80211_qos_map { * @change_mpath: change a given mesh path * @get_mpath: get a mesh path for the given parameters * @dump_mpath: dump mesh path callback -- resume dump at index @idx + * @get_mpp: get a mesh proxy path for the given parameters + * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx * @join_mesh: join the mesh network with the specified parameters * (invoked with the wireless_dev mutex held) * @leave_mesh: leave the current mesh network @@ -2331,6 +2420,17 @@ struct cfg80211_qos_map { * with the peer followed by immediate teardown when the addition is later * rejected) * @del_tx_ts: remove an existing TX TS + * + * @join_ocb: join the OCB network with the specified parameters + * (invoked with the wireless_dev mutex held) + * @leave_ocb: leave the current OCB network + * (invoked with the wireless_dev mutex held) + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2376,7 +2476,7 @@ struct cfg80211_ops { const u8 *mac, struct station_parameters *params); int (*del_station)(struct wiphy *wiphy, struct net_device *dev, - const u8 *mac); + struct station_del_parameters *params); int (*change_station)(struct wiphy *wiphy, struct net_device *dev, const u8 *mac, struct station_parameters *params); @@ -2396,6 +2496,11 @@ struct cfg80211_ops { int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); + int (*get_mpp)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst, u8 *mpp, struct mpath_info *pinfo); + int (*dump_mpp)(struct wiphy *wiphy, struct net_device *dev, + int idx, u8 *dst, u8 *mpp, + struct mpath_info *pinfo); int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); @@ -2407,6 +2512,10 @@ struct cfg80211_ops { const struct mesh_setup *setup); int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); + int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev, + struct ocb_setup *setup); + int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev); + int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, struct bss_parameters *params); @@ -2577,6 +2686,14 @@ struct cfg80211_ops { u16 admitted_time); int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, u8 tsid, const u8 *peer); + + int (*tdls_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr, u8 oper_class, + struct cfg80211_chan_def *chandef); + void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr); }; /* @@ -2623,13 +2740,9 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). - * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM - * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS - * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it - * needs to be able to handle Block-Ack agreements and other things. */ enum wiphy_flags { - WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0), + /* use hole at 0 */ /* use hole at 1 */ /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), @@ -2755,6 +2868,7 @@ struct ieee80211_txrx_stypes { * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release + * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection */ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_ANY = BIT(0), @@ -2765,6 +2879,7 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), + WIPHY_WOWLAN_NET_DETECT = BIT(8), }; struct wiphy_wowlan_tcp_support { @@ -2783,6 +2898,11 @@ struct wiphy_wowlan_tcp_support { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @max_nd_match_sets: maximum number of matchsets for net-detect, + * similar, but not necessarily identical, to max_match_sets for + * scheduled scans. + * See &struct cfg80211_sched_scan_request.@match_sets for more + * details. * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { @@ -2791,6 +2911,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + int max_nd_match_sets; const struct wiphy_wowlan_tcp_support *tcp; }; @@ -3166,6 +3287,23 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) } /** + * wiphy_new_nm - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * @requested_name: Request a particular name. + * NULL is valid value, and means use the default phy%d naming. + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv, + const char *requested_name); + +/** * wiphy_new - create a new wiphy for use with cfg80211 * * @ops: The configuration operations for this device @@ -3177,7 +3315,11 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Return: A pointer to the new wiphy. This pointer must be * assigned to each netdev's ieee80211_ptr for proper operation. */ -struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); +static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops, + int sizeof_priv) +{ + return wiphy_new_nm(ops, sizeof_priv, NULL); +} /** * wiphy_register - register a wiphy with cfg80211 @@ -4501,33 +4643,6 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, gfp_t gfp); /** - * cfg80211_radar_event - radar detection event - * @wiphy: the wiphy - * @chandef: chandef for the current channel - * @gfp: context flags - * - * This function is called when a radar is detected on the current chanenl. - */ -void cfg80211_radar_event(struct wiphy *wiphy, - struct cfg80211_chan_def *chandef, gfp_t gfp); - -/** - * cfg80211_cac_event - Channel availability check (CAC) event - * @netdev: network device - * @chandef: chandef for the current channel - * @event: type of event - * @gfp: context flags - * - * This function is called when a Channel availability check (CAC) is finished - * or aborted. This must be called to notify the completion of a CAC process, - * also by full-MAC drivers. - */ -void cfg80211_cac_event(struct net_device *netdev, - const struct cfg80211_chan_def *chandef, - enum nl80211_radar_event event, gfp_t gfp); - - -/** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device * @peer: peer's MAC address @@ -4555,6 +4670,42 @@ void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer, u32 num_packets, u32 rate, u32 intvl, gfp_t gfp); /** + * cfg80211_cqm_beacon_loss_notify - beacon loss event + * @dev: network device + * @gfp: context flags + * + * Notify userspace about beacon loss from the connected AP. + */ +void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp); + +/** + * cfg80211_radar_event - radar detection event + * @wiphy: the wiphy + * @chandef: chandef for the current channel + * @gfp: context flags + * + * This function is called when a radar is detected on the current chanenl. + */ +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, gfp_t gfp); + +/** + * cfg80211_cac_event - Channel availability check (CAC) event + * @netdev: network device + * @chandef: chandef for the current channel + * @event: type of event + * @gfp: context flags + * + * This function is called when a Channel availability check (CAC) is finished + * or aborted. This must be called to notify the completion of a CAC process, + * also by full-MAC drivers. + */ +void cfg80211_cac_event(struct net_device *netdev, + const struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, gfp_t gfp); + + +/** * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying * @dev: network device * @bssid: BSSID of AP (to avoid races) @@ -4657,6 +4808,20 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, void cfg80211_ch_switch_notify(struct net_device *dev, struct cfg80211_chan_def *chandef); +/* + * cfg80211_ch_switch_started_notify - notify channel switch start + * @dev: the device on which the channel switch started + * @chandef: the future channel definition + * @count: the number of TBTTs until the channel switch happens + * + * Inform the userspace about the channel switch that has just + * started, so that it can take appropriate actions (eg. starting + * channel switch on other vifs), if necessary. + */ +void cfg80211_ch_switch_started_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef, + u8 count); + /** * ieee80211_operating_class_to_band - convert operating class to band * |
