diff options
Diffstat (limited to 'include/media')
| -rw-r--r-- | include/media/dvb_frontend.h | 12 | ||||
| -rw-r--r-- | include/media/dvb_vb2.h | 2 | ||||
| -rw-r--r-- | include/media/dvbdev.h | 4 | ||||
| -rw-r--r-- | include/media/v4l2-async.h | 8 | ||||
| -rw-r--r-- | include/media/v4l2-common.h | 4 | ||||
| -rw-r--r-- | include/media/v4l2-ctrls.h | 2 | ||||
| -rw-r--r-- | include/media/v4l2-dev.h | 16 | ||||
| -rw-r--r-- | include/media/v4l2-event.h | 2 | ||||
| -rw-r--r-- | include/media/v4l2-subdev.h | 8 |
9 files changed, 29 insertions, 29 deletions
diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h index 0b40886..331c826 100644 --- a/include/media/dvb_frontend.h +++ b/include/media/dvb_frontend.h @@ -99,10 +99,10 @@ struct dvb_tuner_info { * struct analog_parameters - Parameters to tune into an analog/radio channel * * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, - * for TV, or 62.5 Hz for radio) + * for TV, or 62.5 Hz for radio) * @mode: Tuner mode, as defined on enum v4l2_tuner_type * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, - * e. g. V4L2_TUNER_MODE_* + * e. g. V4L2_TUNER_MODE_* * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* * * Hybrid tuners should be supported by both V4L2 and DVB APIs. This @@ -205,7 +205,7 @@ enum dvbfe_search { * @get_frequency: get the actual tuned frequency * @get_bandwidth: get the bandwitdh used by the low pass filters * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, - * should return 0. + * should return 0. * @get_status: returns the frontend lock status * @get_rf_strength: returns the RF signal strength. Used mostly to support * analog TV and radio. Digital TV should report, instead, @@ -364,7 +364,7 @@ struct dtv_frontend_properties; * implementing this callback only if DVBv3 API * compatibility is wanted. * @read_snr: legacy callback function to return the Signal/Noise - * rate. Newer drivers should provide such info via + * rate. Newer drivers should provide such info via * DVBv5 API, e. g. @set_frontend/@get_frontend, * implementing this callback only if DVBv3 API * compatibility is wanted. @@ -490,7 +490,7 @@ struct dvb_fe_events { * @fec_inner: Forward error correction inner Code Rate * @transmission_mode: Transmission Mode * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace - * wants to autodetect. + * wants to autodetect. * @guard_interval: Guard Interval * @hierarchy: Hierarchy * @symbol_rate: Symbol Rate @@ -538,7 +538,7 @@ struct dvb_fe_events { * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) * @strength: DVBv5 API statistics: Signal Strength * @cnr: DVBv5 API statistics: Signal to Noise ratio of the - * (main) carrier + * (main) carrier * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count diff --git a/include/media/dvb_vb2.h b/include/media/dvb_vb2.h index 5431e5a..dda61af 100644 --- a/include/media/dvb_vb2.h +++ b/include/media/dvb_vb2.h @@ -213,7 +213,7 @@ int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req); * @b: &struct dmx_buffer passed from userspace in * order to handle &DMX_QUERYBUF. * - * + * */ int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h index bbc1c20..554db87 100644 --- a/include/media/dvbdev.h +++ b/include/media/dvbdev.h @@ -193,7 +193,7 @@ struct dvb_device { * @module: initialized with THIS_MODULE at the caller * @device: pointer to struct device that corresponds to the device driver * @adapter_nums: Array with a list of the numbers for @dvb_register_adapter; - * to select among them. Typically, initialized with: + * to select among them. Typically, initialized with: * DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nums) */ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, @@ -259,7 +259,7 @@ void dvb_unregister_device(struct dvb_device *dvbdev); #ifdef CONFIG_MEDIA_CONTROLLER_DVB /** * dvb_create_media_graph - Creates media graph for the Digital TV part of the - * device. + * device. * * @adap: pointer to &struct dvb_adapter * @create_rf_connector: if true, it creates the RF connector too diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h index 96e1924..1592d32 100644 --- a/include/media/v4l2-async.h +++ b/include/media/v4l2-async.h @@ -28,7 +28,7 @@ struct v4l2_async_notifier; * in order to identify a match * * @V4L2_ASYNC_MATCH_CUSTOM: Match will use the logic provided by &struct - * v4l2_async_subdev.match ops + * v4l2_async_subdev.match ops * @V4L2_ASYNC_MATCH_DEVNAME: Match will use the device name * @V4L2_ASYNC_MATCH_I2C: Match will check for I2C adapter ID and address * @V4L2_ASYNC_MATCH_FWNODE: Match will use firmware node @@ -55,7 +55,7 @@ enum v4l2_async_match_type { * string containing the device name to be matched. * Used if @match_type is %V4L2_ASYNC_MATCH_DEVNAME. * @match.i2c: embedded struct with I2C parameters to be matched. - * Both @match.i2c.adapter_id and @match.i2c.address + * Both @match.i2c.adapter_id and @match.i2c.address * should be matched. * Used if @match_type is %V4L2_ASYNC_MATCH_I2C. * @match.i2c.adapter_id: @@ -188,7 +188,7 @@ void v4l2_async_notifier_cleanup(struct v4l2_async_notifier *notifier); /** * v4l2_async_register_subdev - registers a sub-device to the asynchronous - * subdevice framework + * subdevice framework * * @sd: pointer to &struct v4l2_subdev */ @@ -218,7 +218,7 @@ int __must_check v4l2_async_register_subdev_sensor_common( /** * v4l2_async_unregister_subdev - unregisters a sub-device to the asynchronous - * subdevice framework + * subdevice framework * * @sd: pointer to &struct v4l2_subdev */ diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index f420c45..7fc0bc6b 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -127,7 +127,7 @@ struct v4l2_subdev_ops; * @client_type: name of the chip that's on the adapter. * @addr: I2C address. If zero, it will use @probe_addrs * @probe_addrs: array with a list of address. The last entry at such - * array should be %I2C_CLIENT_END. + * array should be %I2C_CLIENT_END. * * returns a &struct v4l2_subdev pointer. */ @@ -146,7 +146,7 @@ struct i2c_board_info; * @info: pointer to struct i2c_board_info used to replace the irq, * platform_data and addr arguments. * @probe_addrs: array with a list of address. The last entry at such - * array should be %I2C_CLIENT_END. + * array should be %I2C_CLIENT_END. * * returns a &struct v4l2_subdev pointer. */ diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 5ccf501..5253b54 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -1146,7 +1146,7 @@ int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, /** * v4l2_ctrl_subdev_subscribe_event - Helper function to implement - * as a &struct v4l2_subdev_core_ops subscribe_event function + * as a &struct v4l2_subdev_core_ops subscribe_event function * that just subscribes control events. * * @sd: pointer to &struct v4l2_subdev diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 88773a6..267fd2b 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -66,7 +66,7 @@ struct v4l2_ctrl_handler; * enum v4l2_video_device_flags - Flags used by &struct video_device * * @V4L2_FL_REGISTERED: - * indicates that a &struct video_device is registered. + * indicates that a &struct video_device is registered. * Drivers can clear this flag if they want to block all future * device access. It is cleared by video_unregister_device. * @V4L2_FL_USES_V4L2_FH: @@ -198,7 +198,7 @@ struct v4l2_file_operations { /* * Newer version of video_device, handled by videodev2.c - * This version moves redundant code from video device code to + * This version moves redundant code from video device code to * the common handler */ @@ -317,7 +317,7 @@ struct video_device * @vdev: struct video_device to register * @type: type of device to register, as defined by &enum vfl_devnode_type * @nr: which device node number is desired: - * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) * @warn_if_nr_in_use: warn if the desired device node number * was already in use and another number was chosen instead. * @owner: module that owns the video device node @@ -351,13 +351,13 @@ int __must_check __video_register_device(struct video_device *vdev, * @vdev: struct video_device to register * @type: type of device to register, as defined by &enum vfl_devnode_type * @nr: which device node number is desired: - * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) * * Internally, it calls __video_register_device(). Please see its * documentation for more details. * * .. note:: - * if video_register_device fails, the release() callback of + * if video_register_device fails, the release() callback of * &struct video_device structure is *not* called, so the caller * is responsible for freeing any data. Usually that means that * you video_device_release() should be called on failure. @@ -375,7 +375,7 @@ static inline int __must_check video_register_device(struct video_device *vdev, * @vdev: struct video_device to register * @type: type of device to register, as defined by &enum vfl_devnode_type * @nr: which device node number is desired: - * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) * * This function is identical to video_register_device() except that no * warning is issued if the desired device node number was already in use. @@ -384,7 +384,7 @@ static inline int __must_check video_register_device(struct video_device *vdev, * documentation for more details. * * .. note:: - * if video_register_device fails, the release() callback of + * if video_register_device fails, the release() callback of * &struct video_device structure is *not* called, so the caller * is responsible for freeing any data. Usually that means that * you video_device_release() should be called on failure. @@ -423,7 +423,7 @@ void video_device_release(struct video_device *vdev); /** * video_device_release_empty - helper function to implement the - * video_device->release\(\) callback. + * video_device->release\(\) callback. * * @vdev: pointer to &struct video_device * diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h index 4e83529..17833e8 100644 --- a/include/media/v4l2-event.h +++ b/include/media/v4l2-event.h @@ -184,7 +184,7 @@ int v4l2_event_subdev_unsubscribe(struct v4l2_subdev *sd, struct v4l2_event_subscription *sub); /** * v4l2_src_change_event_subscribe - helper function that calls - * v4l2_event_subscribe() if the event is %V4L2_EVENT_SOURCE_CHANGE. + * v4l2_event_subscribe() if the event is %V4L2_EVENT_SOURCE_CHANGE. * * @fh: pointer to struct v4l2_fh * @sub: pointer to &struct v4l2_event_subscription diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 71b8ff4..980a86c 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -116,7 +116,7 @@ struct v4l2_decode_vbi_line { * @V4L2_SUBDEV_IO_PIN_OUTPUT: set it if pin is an output. * @V4L2_SUBDEV_IO_PIN_INPUT: set it if pin is an input. * @V4L2_SUBDEV_IO_PIN_SET_VALUE: to set the output value via - * &struct v4l2_subdev_io_pin_config->value. + * &struct v4l2_subdev_io_pin_config->value. * @V4L2_SUBDEV_IO_PIN_ACTIVE_LOW: pin active is bit 0. * Otherwise, ACTIVE HIGH is assumed. */ @@ -253,14 +253,14 @@ struct v4l2_subdev_core_ops { * * .. note:: * - * On devices that have both AM/FM and TV, it is up to the driver + * On devices that have both AM/FM and TV, it is up to the driver * to explicitly call s_radio when the tuner should be switched to * radio mode, before handling other &struct v4l2_subdev_tuner_ops * that would require it. An example of such usage is:: * * static void s_frequency(void *priv, const struct v4l2_frequency *f) * { - * ... + * ... * if (f.type == V4L2_TUNER_RADIO) * v4l2_device_call_all(v4l2_dev, 0, tuner, s_radio); * ... @@ -333,7 +333,7 @@ enum v4l2_mbus_frame_desc_flags { * * @flags: bitmask flags, as defined by &enum v4l2_mbus_frame_desc_flags. * @pixelcode: media bus pixel code, valid if @flags - * %FRAME_DESC_FL_BLOB is not set. + * %FRAME_DESC_FL_BLOB is not set. * @length: number of octets per frame, valid if @flags * %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX is set. */ |
