summaryrefslogtreecommitdiffstats
path: root/include/media
diff options
context:
space:
mode:
Diffstat (limited to 'include/media')
-rw-r--r--include/media/ir-common.h3
-rw-r--r--include/media/ir-core.h181
-rw-r--r--include/media/ir-kbd-i2c.h3
3 files changed, 82 insertions, 105 deletions
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index d1ae869f..41fefd9 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -36,12 +36,11 @@
/* this was saa7134_ir and bttv_ir, moved here for
* rc5 decoding. */
struct card_ir {
- struct input_dev *dev;
+ struct rc_dev *dev;
char name[32];
char phys[32];
int users;
u32 running:1;
- struct ir_dev_props props;
/* Usual gpio signalling */
u32 mask_keycode;
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index d41502d..c590998 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -32,21 +32,38 @@ enum rc_driver_type {
};
/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- * or if it needs to use the IR raw event decoders to produce a scancode
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_tab: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
* @allowed_protos: bitmask with the supported IR_TYPE_* protocols
* @scanmask: some hardware decoders are not capable of providing the full
* scancode to the application. As this is a hardware limit, we can't do
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
* is opened.
@@ -57,55 +74,50 @@ enum rc_driver_type {
* @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
* @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
- device doesn't interrupt host until it sees IR pulses
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ * device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
*/
-struct ir_dev_props {
- enum rc_driver_type driver_type;
- unsigned long allowed_protos;
- u32 scanmask;
-
- u32 timeout;
- u32 min_timeout;
- u32 max_timeout;
-
- u32 rx_resolution;
- u32 tx_resolution;
-
- void *priv;
- int (*change_protocol)(void *priv, u64 ir_type);
- int (*open)(void *priv);
- void (*close)(void *priv);
- int (*s_tx_mask)(void *priv, u32 mask);
- int (*s_tx_carrier)(void *priv, u32 carrier);
- int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
- int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
- int (*tx_ir)(void *priv, int *txbuf, u32 n);
- void (*s_idle)(void *priv, bool enable);
- int (*s_learning_mode)(void *priv, int enable);
- int (*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
- struct device dev; /* device */
- char *driver_name; /* Name of the driver module */
- struct ir_scancode_table rc_tab; /* scan/key table */
- unsigned long devno; /* device number */
- struct ir_dev_props *props; /* Device properties */
- struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */
- struct input_dev *input_dev; /* the input device associated with this device */
+struct rc_dev {
+ struct device dev;
+ const char *input_name;
+ const char *input_phys;
+ struct input_id input_id;
+ char *driver_name;
+ const char *map_name;
+ struct ir_scancode_table rc_tab;
+ unsigned long devno;
+ struct ir_raw_event_ctrl *raw;
+ struct input_dev *input_dev;
+ enum rc_driver_type driver_type;
bool idle;
-
- /* key info - needed by IR keycode handlers */
- spinlock_t keylock; /* protects the below members */
- bool keypressed; /* current state */
- unsigned long keyup_jiffies; /* when should the current keypress be released? */
- struct timer_list timer_keyup; /* timer for releasing a keypress */
- u32 last_keycode; /* keycode of last command */
- u32 last_scancode; /* scancode of last command */
- u8 last_toggle; /* toggle of last command */
+ u64 allowed_protos;
+ u32 scanmask;
+ void *priv;
+ spinlock_t keylock;
+ bool keypressed;
+ unsigned long keyup_jiffies;
+ struct timer_list timer_keyup;
+ u32 last_keycode;
+ u32 last_scancode;
+ u8 last_toggle;
+ u32 timeout;
+ u32 min_timeout;
+ u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
+ int (*change_protocol)(struct rc_dev *dev, u64 ir_type);
+ int (*open)(struct rc_dev *dev);
+ void (*close)(struct rc_dev *dev);
+ int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
+ int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+ int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+ int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+ int (*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+ void (*s_idle)(struct rc_dev *dev, bool enable);
+ int (*s_learning_mode)(struct rc_dev *dev, int enable);
+ int (*s_carrier_report) (struct rc_dev *dev, int enable);
};
enum raw_event_type {
@@ -115,52 +127,14 @@ enum raw_event_type {
IR_STOP_EVENT = (1 << 3),
};
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-int __ir_input_register(struct input_dev *dev,
- const struct ir_scancode_table *ir_codes,
- struct ir_dev_props *props,
- const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
- const char *map_name,
- struct ir_dev_props *props,
- const char *driver_name) {
- struct ir_scancode_table *ir_codes;
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (!map_name)
- return -EINVAL;
-
- ir_codes = get_rc_map(map_name);
- if (!ir_codes) {
- ir_codes = get_rc_map(RC_MAP_EMPTY);
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
- if (!ir_codes)
- return -EINVAL;
- }
- rc = __ir_input_register(dev, ir_codes, props, driver_name);
- if (rc < 0)
- return -EINVAL;
-
- ir_dev = input_get_drvdata(dev);
-
- if (!rc && ir_dev->props && ir_dev->props->change_protocol)
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- ir_codes->ir_type);
-
- return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct input_dev *dev);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
+void ir_repeat(struct rc_dev *dev);
+void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void ir_keyup(struct rc_dev *dev);
+u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
/* From ir-raw-event.c */
struct ir_raw_event {
@@ -194,20 +168,25 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev)
#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
+static inline void ir_raw_event_reset(struct rc_dev *dev)
{
DEFINE_IR_RAW_EVENT(ev);
ev.reset = true;
- ir_raw_event_store(input_dev, &ev);
- ir_raw_event_handle(input_dev);
+ ir_raw_event_store(dev, &ev);
+ ir_raw_event_handle(dev);
}
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 8c37b5e..4ee9b42 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -9,9 +9,8 @@ struct IR_i2c;
struct IR_i2c {
char *ir_codes;
-
struct i2c_client *c;
- struct input_dev *input;
+ struct rc_dev *rc;
/* Used to avoid fast repeating */
unsigned char old;
OpenPOWER on IntegriCloud