diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/cper.h | 86 | ||||
| -rw-r--r-- | include/linux/ipmi.h | 38 | ||||
| -rw-r--r-- | include/linux/ipmi_smi.h | 8 | ||||
| -rw-r--r-- | include/linux/thermal.h | 47 |
4 files changed, 165 insertions, 14 deletions
diff --git a/include/linux/cper.h b/include/linux/cper.h index bf972f8..3104aaf 100644 --- a/include/linux/cper.h +++ b/include/linux/cper.h @@ -39,10 +39,12 @@ * Severity difinition for error_severity in struct cper_record_header * and section_severity in struct cper_section_descriptor */ -#define CPER_SEV_RECOVERABLE 0x0 -#define CPER_SEV_FATAL 0x1 -#define CPER_SEV_CORRECTED 0x2 -#define CPER_SEV_INFORMATIONAL 0x3 +enum { + CPER_SEV_RECOVERABLE, + CPER_SEV_FATAL, + CPER_SEV_CORRECTED, + CPER_SEV_INFORMATIONAL, +}; /* * Validation bits difinition for validation_bits in struct @@ -201,6 +203,47 @@ UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F, \ 0xDF, 0xAA, 0x84, 0xEC) +#define CPER_PROC_VALID_TYPE 0x0001 +#define CPER_PROC_VALID_ISA 0x0002 +#define CPER_PROC_VALID_ERROR_TYPE 0x0004 +#define CPER_PROC_VALID_OPERATION 0x0008 +#define CPER_PROC_VALID_FLAGS 0x0010 +#define CPER_PROC_VALID_LEVEL 0x0020 +#define CPER_PROC_VALID_VERSION 0x0040 +#define CPER_PROC_VALID_BRAND_INFO 0x0080 +#define CPER_PROC_VALID_ID 0x0100 +#define CPER_PROC_VALID_TARGET_ADDRESS 0x0200 +#define CPER_PROC_VALID_REQUESTOR_ID 0x0400 +#define CPER_PROC_VALID_RESPONDER_ID 0x0800 +#define CPER_PROC_VALID_IP 0x1000 + +#define CPER_MEM_VALID_ERROR_STATUS 0x0001 +#define CPER_MEM_VALID_PHYSICAL_ADDRESS 0x0002 +#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK 0x0004 +#define CPER_MEM_VALID_NODE 0x0008 +#define CPER_MEM_VALID_CARD 0x0010 +#define CPER_MEM_VALID_MODULE 0x0020 +#define CPER_MEM_VALID_BANK 0x0040 +#define CPER_MEM_VALID_DEVICE 0x0080 +#define CPER_MEM_VALID_ROW 0x0100 +#define CPER_MEM_VALID_COLUMN 0x0200 +#define CPER_MEM_VALID_BIT_POSITION 0x0400 +#define CPER_MEM_VALID_REQUESTOR_ID 0x0800 +#define CPER_MEM_VALID_RESPONDER_ID 0x1000 +#define CPER_MEM_VALID_TARGET_ID 0x2000 +#define CPER_MEM_VALID_ERROR_TYPE 0x4000 + +#define CPER_PCIE_VALID_PORT_TYPE 0x0001 +#define CPER_PCIE_VALID_VERSION 0x0002 +#define CPER_PCIE_VALID_COMMAND_STATUS 0x0004 +#define CPER_PCIE_VALID_DEVICE_ID 0x0008 +#define CPER_PCIE_VALID_SERIAL_NUMBER 0x0010 +#define CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS 0x0020 +#define CPER_PCIE_VALID_CAPABILITY 0x0040 +#define CPER_PCIE_VALID_AER_INFO 0x0080 + +#define CPER_PCIE_SLOT_SHIFT 3 + /* * All tables and structs must be byte-packed to match CPER * specification, since the tables are provided by the system BIOS @@ -306,6 +349,41 @@ struct cper_sec_mem_err { __u8 error_type; }; +struct cper_sec_pcie { + __u64 validation_bits; + __u32 port_type; + struct { + __u8 minor; + __u8 major; + __u8 reserved[2]; + } version; + __u16 command; + __u16 status; + __u32 reserved; + struct { + __u16 vendor_id; + __u16 device_id; + __u8 class_code[3]; + __u8 function; + __u8 device; + __u16 segment; + __u8 bus; + __u8 secondary_bus; + __u16 slot; + __u8 reserved; + } device_id; + struct { + __u32 lower; + __u32 upper; + } serial_number; + struct { + __u16 secondary_status; + __u16 control; + } bridge; + __u8 capability[60]; + __u8 aer_info[96]; +}; + /* Reset to default packing */ #pragma pack() diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 65aae34..045f2f2 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -454,6 +454,44 @@ unsigned int ipmi_addr_length(int addr_type); /* Validate that the given IPMI address is valid. */ int ipmi_validate_addr(struct ipmi_addr *addr, int len); +/* + * How did the IPMI driver find out about the device? + */ +enum ipmi_addr_src { + SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, + SI_PCI, SI_DEVICETREE, SI_DEFAULT +}; + +union ipmi_smi_info_union { + /* + * the acpi_info element is defined for the SI_ACPI + * address type + */ + struct { + void *acpi_handle; + } acpi_info; +}; + +struct ipmi_smi_info { + enum ipmi_addr_src addr_src; + + /* + * Base device for the interface. Don't forget to put this when + * you are done. + */ + struct device *dev; + + /* + * The addr_info provides more detailed info for some IPMI + * devices, depending on the addr_src. Currently only SI_ACPI + * info is provided. + */ + union ipmi_smi_info_union addr_info; +}; + +/* This is to get the private info of ipmi_smi_t */ +extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); + #endif /* __KERNEL__ */ diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 4b48318..906590a 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -39,6 +39,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/ipmi.h> /* This files describes the interface for IPMI system management interface drivers to bind into the IPMI message handler. */ @@ -86,6 +87,13 @@ struct ipmi_smi_handlers { int (*start_processing)(void *send_info, ipmi_smi_t new_intf); + /* + * Get the detailed private info of the low level interface and store + * it into the structure of ipmi_smi_data. For example: the + * ACPI device handle will be returned for the pnp_acpi IPMI device. + */ + int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data); + /* Called to enqueue an SMI message to be sent. This operation is not allowed to fail. If an error occurs, it should report back the error in a received message. It may diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 1de8b9eb..8651556 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -77,7 +77,7 @@ struct thermal_cooling_device { char type[THERMAL_NAME_LENGTH]; struct device device; void *devdata; - struct thermal_cooling_device_ops *ops; + const struct thermal_cooling_device_ops *ops; struct list_head node; }; @@ -114,7 +114,7 @@ struct thermal_zone_device { int last_temperature; bool passive; unsigned int forced_passive; - struct thermal_zone_device_ops *ops; + const struct thermal_zone_device_ops *ops; struct list_head cooling_devices; struct idr idr; struct mutex lock; /* protect cooling devices list */ @@ -127,13 +127,41 @@ struct thermal_zone_device { struct thermal_hwmon_attr temp_crit; /* hwmon sys attr */ #endif }; +/* Adding event notification support elements */ +#define THERMAL_GENL_FAMILY_NAME "thermal_event" +#define THERMAL_GENL_VERSION 0x01 +#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" + +enum events { + THERMAL_AUX0, + THERMAL_AUX1, + THERMAL_CRITICAL, + THERMAL_DEV_FAULT, +}; + +struct thermal_genl_event { + u32 orig; + enum events event; +}; +/* attributes of thermal_genl_family */ +enum { + THERMAL_GENL_ATTR_UNSPEC, + THERMAL_GENL_ATTR_EVENT, + __THERMAL_GENL_ATTR_MAX, +}; +#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) + +/* commands supported by the thermal_genl_family */ +enum { + THERMAL_GENL_CMD_UNSPEC, + THERMAL_GENL_CMD_EVENT, + __THERMAL_GENL_CMD_MAX, +}; +#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) struct thermal_zone_device *thermal_zone_device_register(char *, int, void *, - struct - thermal_zone_device_ops - *, int tc1, int tc2, - int passive_freq, - int polling_freq); + const struct thermal_zone_device_ops *, int tc1, int tc2, + int passive_freq, int polling_freq); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, @@ -142,9 +170,8 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, - struct - thermal_cooling_device_ops - *); + const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); +extern int generate_netlink_event(u32 orig, enum events event); #endif /* __THERMAL_H__ */ |
