summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/Kbuild379
-rw-r--r--include/linux/a.out.h196
-rw-r--r--include/linux/acct.h108
-rw-r--r--include/linux/adb.h39
-rw-r--r--include/linux/adfs_fs.h42
-rw-r--r--include/linux/affs_hardblocks.h68
-rw-r--r--include/linux/agpgart.h86
-rw-r--r--include/linux/aio_abi.h111
-rw-r--r--include/linux/apm_bios.h125
-rw-r--r--include/linux/arcfb.h8
-rw-r--r--include/linux/atalk.h43
-rw-r--r--include/linux/atm.h238
-rw-r--r--include/linux/atm_eni.h23
-rw-r--r--include/linux/atm_he.h20
-rw-r--r--include/linux/atm_idt77105.h28
-rw-r--r--include/linux/atm_nicstar.h53
-rw-r--r--include/linux/atm_tcp.h54
-rw-r--r--include/linux/atm_zatm.h52
-rw-r--r--include/linux/atmapi.h29
-rw-r--r--include/linux/atmarp.h41
-rw-r--r--include/linux/atmbr2684.h117
-rw-r--r--include/linux/atmclip.h21
-rw-r--r--include/linux/atmdev.h213
-rw-r--r--include/linux/atmioc.h41
-rw-r--r--include/linux/atmlec.h91
-rw-r--r--include/linux/atmmpc.h126
-rw-r--r--include/linux/atmppp.h24
-rw-r--r--include/linux/atmsap.h162
-rw-r--r--include/linux/atmsvc.h55
-rw-r--r--include/linux/audit.h381
-rw-r--r--include/linux/auto_fs.h68
-rw-r--r--include/linux/auto_fs4.h164
-rw-r--r--include/linux/auxvec.h33
-rw-r--r--include/linux/ax25.h116
-rw-r--r--include/linux/b1lli.h73
-rw-r--r--include/linux/baycom.h39
-rw-r--r--include/linux/bfs_fs.h81
-rw-r--r--include/linux/binfmts.h19
-rw-r--r--include/linux/blkpg.h59
-rw-r--r--include/linux/blktrace_api.h142
-rw-r--r--include/linux/bpqether.h41
-rw-r--r--include/linux/bsg.h63
-rw-r--r--include/linux/can.h162
-rw-r--r--include/linux/capability.h346
-rw-r--r--include/linux/capi.h133
-rw-r--r--include/linux/cciss_defs.h130
-rw-r--r--include/linux/cciss_ioctl.h86
-rw-r--r--include/linux/cdrom.h902
-rw-r--r--include/linux/cgroupstats.h71
-rw-r--r--include/linux/chio.h168
-rw-r--r--include/linux/cm4000_cs.h60
-rw-r--r--include/linux/cn_proc.h103
-rw-r--r--include/linux/coda.h680
-rw-r--r--include/linux/coda_psdev.h26
-rw-r--r--include/linux/coff.h351
-rw-r--r--include/linux/connector.h56
-rw-r--r--include/linux/const.h24
-rw-r--r--include/linux/cramfs_fs.h86
-rw-r--r--include/linux/cuda.h25
-rw-r--r--include/linux/cyclades.h426
-rw-r--r--include/linux/cycx_cfm.h101
-rw-r--r--include/linux/dcbnl.h684
-rw-r--r--include/linux/dccp.h236
-rw-r--r--include/linux/dlm.h62
-rw-r--r--include/linux/dlm_device.h108
-rw-r--r--include/linux/dlm_netlink.h58
-rw-r--r--include/linux/dlm_plock.h37
-rw-r--r--include/linux/dlmconstants.h163
-rw-r--r--include/linux/dm-ioctl.h339
-rw-r--r--include/linux/dm-log-userspace.h416
-rw-r--r--include/linux/dn.h146
-rw-r--r--include/linux/dqblk_xfs.h166
-rw-r--r--include/linux/edd.h158
-rw-r--r--include/linux/efs_fs_sb.h62
-rw-r--r--include/linux/elf-em.h56
-rw-r--r--include/linux/elf-fdpic.h70
-rw-r--r--include/linux/elf.h414
-rw-r--r--include/linux/elfcore.h102
-rw-r--r--include/linux/errno.h5
-rw-r--r--include/linux/errqueue.h25
-rw-r--r--include/linux/ethtool.h1076
-rw-r--r--include/linux/eventpoll.h53
-rw-r--r--include/linux/fadvise.h21
-rw-r--r--include/linux/falloc.h7
-rw-r--r--include/linux/fanotify.h114
-rw-r--r--include/linux/fb.h403
-rw-r--r--include/linux/fcntl.h50
-rw-r--r--include/linux/fd.h380
-rw-r--r--include/linux/fdreg.h137
-rw-r--r--include/linux/fib_rules.h72
-rw-r--r--include/linux/fiemap.h68
-rw-r--r--include/linux/filter.h133
-rw-r--r--include/linux/firewire-cdev.h1039
-rw-r--r--include/linux/firewire-constants.h92
-rw-r--r--include/linux/flat.h50
-rw-r--r--include/linux/fs.h333
-rw-r--r--include/linux/fsl_hypervisor.h180
-rw-r--r--include/linux/fuse.h677
-rw-r--r--include/linux/futex.h150
-rw-r--r--include/linux/gameport.h26
-rw-r--r--include/linux/gen_stats.h67
-rw-r--r--include/linux/genetlink.h82
-rw-r--r--include/linux/gfs2_ondisk.h464
-rw-r--r--include/linux/gigaset_dev.h38
-rw-r--r--include/linux/hdlc.h13
-rw-r--r--include/linux/hdlcdrv.h104
-rw-r--r--include/linux/hdreg.h658
-rw-r--r--include/linux/hid.h46
-rw-r--r--include/linux/hiddev.h190
-rw-r--r--include/linux/hidraw.h40
-rw-r--r--include/linux/hpet.h23
-rw-r--r--include/linux/hysdn_if.h33
-rw-r--r--include/linux/i2c-dev.h49
-rw-r--r--include/linux/i2c.h125
-rw-r--r--include/linux/i2o-dev.h421
-rw-r--r--include/linux/i8k.h46
-rw-r--r--include/linux/icmp.h80
-rw-r--r--include/linux/icmpv6.h165
-rw-r--r--include/linux/if.h235
-rw-r--r--include/linux/if_addr.h61
-rw-r--r--include/linux/if_addrlabel.h32
-rw-r--r--include/linux/if_alg.h40
-rw-r--r--include/linux/if_arcnet.h132
-rw-r--r--include/linux/if_arp.h136
-rw-r--r--include/linux/if_bonding.h128
-rw-r--r--include/linux/if_bridge.h89
-rw-r--r--include/linux/if_cablemodem.h22
-rw-r--r--include/linux/if_eql.h36
-rw-r--r--include/linux/if_ether.h115
-rw-r--r--include/linux/if_fc.h51
-rw-r--r--include/linux/if_fddi.h80
-rw-r--r--include/linux/if_frad.h98
-rw-r--r--include/linux/if_hippi.h153
-rw-r--r--include/linux/if_infiniband.h29
-rw-r--r--include/linux/if_link.h427
-rw-r--r--include/linux/if_ltalk.h7
-rw-r--r--include/linux/if_packet.h272
-rw-r--r--include/linux/if_phonet.h7
-rw-r--r--include/linux/if_plip.h27
-rw-r--r--include/linux/if_ppp.h1
-rw-r--r--include/linux/if_pppol2tp.h89
-rw-r--r--include/linux/if_pppox.h143
-rw-r--r--include/linux/if_slip.h30
-rw-r--r--include/linux/if_team.h97
-rw-r--r--include/linux/if_tun.h78
-rw-r--r--include/linux/if_tunnel.h94
-rw-r--r--include/linux/if_vlan.h51
-rw-r--r--include/linux/if_x25.h26
-rw-r--r--include/linux/igmp.h113
-rw-r--r--include/linux/in.h235
-rw-r--r--include/linux/in6.h258
-rw-r--r--include/linux/in_route.h32
-rw-r--r--include/linux/inet_diag.h134
-rw-r--r--include/linux/inotify.h69
-rw-r--r--include/linux/input.h1151
-rw-r--r--include/linux/ioctl.h7
-rw-r--r--include/linux/ip.h119
-rw-r--r--include/linux/ip6_tunnel.h51
-rw-r--r--include/linux/ip_vs.h434
-rw-r--r--include/linux/ipc.h80
-rw-r--r--include/linux/ipmi.h422
-rw-r--r--include/linux/ipmi_msgdefs.h121
-rw-r--r--include/linux/ipsec.h47
-rw-r--r--include/linux/ipv6.h166
-rw-r--r--include/linux/ipv6_route.h45
-rw-r--r--include/linux/ipx.h75
-rw-r--r--include/linux/irda.h251
-rw-r--r--include/linux/irqnr.h8
-rw-r--r--include/linux/isdn.h130
-rw-r--r--include/linux/isdn_divertif.h18
-rw-r--r--include/linux/isdn_ppp.h55
-rw-r--r--include/linux/isdnif.h43
-rw-r--r--include/linux/iso_fs.h165
-rw-r--r--include/linux/ivtv.h73
-rw-r--r--include/linux/ivtvfb.h37
-rw-r--r--include/linux/ixjuser.h720
-rw-r--r--include/linux/jffs2.h223
-rw-r--r--include/linux/joystick.h114
-rw-r--r--include/linux/kd.h181
-rw-r--r--include/linux/kdev_t.h14
-rw-r--r--include/linux/kernel-page-flags.h34
-rw-r--r--include/linux/kernel.h12
-rw-r--r--include/linux/kernelcapi.h38
-rw-r--r--include/linux/kexec.h52
-rw-r--r--include/linux/keyboard.h441
-rw-r--r--include/linux/keyctl.h60
-rw-r--r--include/linux/kvm.h975
-rw-r--r--include/linux/kvm_para.h26
-rw-r--r--include/linux/l2tp.h172
-rw-r--r--include/linux/limits.h20
-rw-r--r--include/linux/llc.h74
-rw-r--r--include/linux/loop.h91
-rw-r--r--include/linux/lp.h97
-rw-r--r--include/linux/magic.h72
-rw-r--r--include/linux/major.h177
-rw-r--r--include/linux/map_to_7segment.h187
-rw-r--r--include/linux/matroxfb.h42
-rw-r--r--include/linux/mdio.h287
-rw-r--r--include/linux/media.h132
-rw-r--r--include/linux/mei.h110
-rw-r--r--include/linux/mempolicy.h63
-rw-r--r--include/linux/meye.h66
-rw-r--r--include/linux/mii.h154
-rw-r--r--include/linux/minix_fs.h106
-rw-r--r--include/linux/mman.h12
-rw-r--r--include/linux/mmtimer.h56
-rw-r--r--include/linux/mqueue.h53
-rw-r--r--include/linux/mroute.h146
-rw-r--r--include/linux/mroute6.h138
-rw-r--r--include/linux/msdos_fs.h165
-rw-r--r--include/linux/msg.h74
-rw-r--r--include/linux/mtio.h208
-rw-r--r--include/linux/n_r3964.h56
-rw-r--r--include/linux/nbd.h63
-rw-r--r--include/linux/ncp.h201
-rw-r--r--include/linux/ncp_fs.h146
-rw-r--r--include/linux/ncp_mount.h71
-rw-r--r--include/linux/ncp_no.h19
-rw-r--r--include/linux/neighbour.h159
-rw-r--r--include/linux/net.h39
-rw-r--r--include/linux/net_dropmon.h64
-rw-r--r--include/linux/net_tstamp.h113
-rw-r--r--include/linux/netdevice.h32
-rw-r--r--include/linux/netfilter.h72
-rw-r--r--include/linux/netfilter_arp.h19
-rw-r--r--include/linux/netfilter_bridge.h27
-rw-r--r--include/linux/netfilter_decnet.h79
-rw-r--r--include/linux/netfilter_ipv4.h80
-rw-r--r--include/linux/netfilter_ipv6.h75
-rw-r--r--include/linux/netlink.h152
-rw-r--r--include/linux/netrom.h36
-rw-r--r--include/linux/nfc.h197
-rw-r--r--include/linux/nfs.h124
-rw-r--r--include/linux/nfs2.h67
-rw-r--r--include/linux/nfs3.h92
-rw-r--r--include/linux/nfs4.h166
-rw-r--r--include/linux/nfs4_mount.h71
-rw-r--r--include/linux/nfs_fs.h54
-rw-r--r--include/linux/nfs_idmap.h28
-rw-r--r--include/linux/nfs_mount.h77
-rw-r--r--include/linux/nfsacl.h23
-rw-r--r--include/linux/nl80211.h3072
-rw-r--r--include/linux/nubus.h234
-rw-r--r--include/linux/nvram.h14
-rw-r--r--include/linux/omap3isp.h646
-rw-r--r--include/linux/omapfb.h198
-rw-r--r--include/linux/oom.h10
-rw-r--r--include/linux/packet_diag.h72
-rw-r--r--include/linux/param.h6
-rw-r--r--include/linux/parport.h89
-rw-r--r--include/linux/patchkey.h24
-rw-r--r--include/linux/pci.h25
-rw-r--r--include/linux/pci_regs.h846
-rw-r--r--include/linux/perf_event.h600
-rw-r--r--include/linux/personality.h71
-rw-r--r--include/linux/pfkeyv2.h370
-rw-r--r--include/linux/pg.h63
-rw-r--r--include/linux/phantom.h49
-rw-r--r--include/linux/phonet.h162
-rw-r--r--include/linux/pkt_cls.h469
-rw-r--r--include/linux/pkt_sched.h738
-rw-r--r--include/linux/pktcdvd.h99
-rw-r--r--include/linux/pmu.h130
-rw-r--r--include/linux/poll.h6
-rw-r--r--include/linux/posix_types.h37
-rw-r--r--include/linux/ppdev.h99
-rw-r--r--include/linux/ppp-comp.h86
-rw-r--r--include/linux/ppp-ioctl.h119
-rw-r--r--include/linux/ppp_defs.h141
-rw-r--r--include/linux/pps.h131
-rw-r--r--include/linux/prctl.h152
-rw-r--r--include/linux/ptp_clock.h84
-rw-r--r--include/linux/ptrace.h88
-rw-r--r--include/linux/qnx4_fs.h88
-rw-r--r--include/linux/qnxtypes.h28
-rw-r--r--include/linux/quota.h139
-rw-r--r--include/linux/radeonfb.h15
-rw-r--r--include/linux/random.h43
-rw-r--r--include/linux/raw.h18
-rw-r--r--include/linux/rds.h285
-rw-r--r--include/linux/reboot.h38
-rw-r--r--include/linux/reiserfs_fs.h26
-rw-r--r--include/linux/reiserfs_xattr.h24
-rw-r--r--include/linux/resource.h78
-rw-r--r--include/linux/rfkill.h92
-rw-r--r--include/linux/romfs_fs.h59
-rw-r--r--include/linux/rose.h90
-rw-r--r--include/linux/route.h69
-rw-r--r--include/linux/rtc.h96
-rw-r--r--include/linux/rtnetlink.h611
-rw-r--r--include/linux/scc.h169
-rw-r--r--include/linux/sched.h44
-rw-r--r--include/linux/screen_info.h72
-rw-r--r--include/linux/sdla.h93
-rw-r--r--include/linux/seccomp.h45
-rw-r--r--include/linux/securebits.h51
-rw-r--r--include/linux/selinux_netlink.h50
-rw-r--r--include/linux/sem.h79
-rw-r--r--include/linux/serial.h119
-rw-r--r--include/linux/serial_core.h199
-rw-r--r--include/linux/serial_reg.h371
-rw-r--r--include/linux/serio.h76
-rw-r--r--include/linux/shm.h81
-rw-r--r--include/linux/signal.h7
-rw-r--r--include/linux/signalfd.h44
-rw-r--r--include/linux/snmp.h284
-rw-r--r--include/linux/sock_diag.h24
-rw-r--r--include/linux/socket.h20
-rw-r--r--include/linux/sockios.h148
-rw-r--r--include/linux/som.h154
-rw-r--r--include/linux/sonet.h58
-rw-r--r--include/linux/sonypi.h110
-rw-r--r--include/linux/sound.h29
-rw-r--r--include/linux/soundcard.h1261
-rw-r--r--include/linux/stat.h46
-rw-r--r--include/linux/stddef.h5
-rw-r--r--include/linux/string.h7
-rw-r--r--include/linux/suspend_ioctls.h33
-rw-r--r--include/linux/swab.h280
-rw-r--r--include/linux/synclink.h288
-rw-r--r--include/linux/sysctl.h911
-rw-r--r--include/linux/sysinfo.h24
-rw-r--r--include/linux/taskstats.h213
-rw-r--r--include/linux/tcp.h208
-rw-r--r--include/linux/tcp_metrics.h54
-rw-r--r--include/linux/telephony.h262
-rw-r--r--include/linux/termios.h22
-rw-r--r--include/linux/time.h72
-rw-r--r--include/linux/times.h13
-rw-r--r--include/linux/timex.h113
-rw-r--r--include/linux/tiocl.h39
-rw-r--r--include/linux/tipc.h209
-rw-r--r--include/linux/tipc_config.h395
-rw-r--r--include/linux/toshiba.h17
-rw-r--r--include/linux/tty.h37
-rw-r--r--include/linux/tty_flags.h78
-rw-r--r--include/linux/types.h50
-rw-r--r--include/linux/udf_fs_i.h21
-rw-r--r--include/linux/udp.h22
-rw-r--r--include/linux/uhid.h104
-rw-r--r--include/linux/uinput.h109
-rw-r--r--include/linux/uio.h24
-rw-r--r--include/linux/ultrasound.h103
-rw-r--r--include/linux/un.h13
-rw-r--r--include/linux/unistd.h9
-rw-r--r--include/linux/unix_diag.h54
-rw-r--r--include/linux/usbdevice_fs.h151
-rw-r--r--include/linux/utime.h11
-rw-r--r--include/linux/utsname.h33
-rw-r--r--include/linux/uuid.h37
-rw-r--r--include/linux/uvcvideo.h70
-rw-r--r--include/linux/v4l2-common.h71
-rw-r--r--include/linux/v4l2-controls.h803
-rw-r--r--include/linux/v4l2-dv-timings.h816
-rw-r--r--include/linux/v4l2-mediabus.h119
-rw-r--r--include/linux/v4l2-subdev.h180
-rw-r--r--include/linux/veth.h12
-rw-r--r--include/linux/vfio.h357
-rw-r--r--include/linux/vhost.h130
-rw-r--r--include/linux/videodev2.h1940
-rw-r--r--include/linux/virtio_9p.h44
-rw-r--r--include/linux/virtio_balloon.h59
-rw-r--r--include/linux/virtio_blk.h130
-rw-r--r--include/linux/virtio_config.h53
-rw-r--r--include/linux/virtio_console.h45
-rw-r--r--include/linux/virtio_ids.h41
-rw-r--r--include/linux/virtio_net.h169
-rw-r--r--include/linux/virtio_pci.h95
-rw-r--r--include/linux/virtio_ring.h163
-rw-r--r--include/linux/virtio_rng.h8
-rw-r--r--include/linux/vt.h88
-rw-r--r--include/linux/wait.h20
-rw-r--r--include/linux/wanrouter.h405
-rw-r--r--include/linux/watchdog.h49
-rw-r--r--include/linux/wimax.h239
-rw-r--r--include/linux/wireless.h1120
-rw-r--r--include/linux/x25.h152
-rw-r--r--include/linux/xattr.h54
-rw-r--r--include/linux/xfrm.h506
379 files changed, 250 insertions, 60011 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index e2a1346..5b57367 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -22,389 +22,10 @@ header-y += wimax/
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-header-y += a.out.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-header-y += kvm.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-header-y += kvm_para.h
endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += packet_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mei.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfc.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += tty_flags.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index e86dfca..220f143 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,278 +1,84 @@
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#include <uapi/linux/a.out.h>
#ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
#if defined (M_OLDSUN2)
- M__OLDSUN2 = M_OLDSUN2,
#else
- M_OLDSUN2 = 0,
#endif
#if defined (M_68010)
- M__68010 = M_68010,
#else
- M_68010 = 1,
#endif
#if defined (M_68020)
- M__68020 = M_68020,
#else
- M_68020 = 2,
#endif
#if defined (M_SPARC)
- M__SPARC = M_SPARC,
#else
- M_SPARC = 3,
#endif
- /* skip a bunch so we don't run into any of sun's numbers */
- M_386 = 100,
- M_MIPS1 = 151, /* MIPS R3000/R3000 binary */
- M_MIPS2 = 152 /* MIPS R6000/R4000 binary */
-};
-
#if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
#endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
- ((exec).a_info = ((magic) & 0xffff) \
- | (((int)(type) & 0xff) << 16) \
- | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
- ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
- ((exec).a_info = \
- ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
- ((exec).a_info = \
- ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable. */
-#define OMAGIC 0407
-/* Code indicating pure executable. */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable. */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text.
- The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file. */
-#define CMAGIC 0421
-
#if !defined (N_BADMAG)
-#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \
- && N_MAGIC(x) != NMAGIC \
- && N_MAGIC(x) != ZMAGIC \
- && N_MAGIC(x) != QMAGIC)
#endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
#if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
- (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
#endif
-
#if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
#endif
-
#if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
#endif
-
#if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
#endif
-
#if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
#endif
-
#if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
#endif
-
-/* Address of text segment in memory after it is loaded. */
#if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
#endif
-
-/* Address of data segment in memory after it is loaded.
- Note that it is up to you to define SEGMENT_SIZE
- on machines not listed here. */
#if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
#endif
#ifdef sony
-#define SEGMENT_SIZE 0x2000
#endif /* Sony. */
#ifdef is68k
-#define SEGMENT_SIZE 0x20000
#endif
#if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
#endif
-
#ifdef linux
-#ifdef __KERNEL__
#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
#if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE 1024
#else
#ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
#define SEGMENT_SIZE PAGE_SIZE
-#else
-#define SEGMENT_SIZE getpagesize()
-#endif
#endif
#endif
#endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
#ifndef N_DATADDR
-#define N_DATADDR(x) \
- (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
- : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
#endif
-
-/* Address of bss segment in memory after it is loaded. */
#if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
#endif
-
#if !defined (N_NLIST_DECLARED)
-struct nlist {
- union {
- char *n_name;
- struct nlist *n_next;
- long n_strx;
- } n_un;
- unsigned char n_type;
- char n_other;
- short n_desc;
- unsigned long n_value;
-};
#endif /* no N_NLIST_DECLARED. */
-
#if !defined (N_UNDF)
-#define N_UNDF 0
#endif
#if !defined (N_ABS)
-#define N_ABS 2
#endif
#if !defined (N_TEXT)
-#define N_TEXT 4
#endif
#if !defined (N_DATA)
-#define N_DATA 6
#endif
#if !defined (N_BSS)
-#define N_BSS 8
#endif
#if !defined (N_FN)
-#define N_FN 15
#endif
-
#if !defined (N_EXT)
-#define N_EXT 1
#endif
#if !defined (N_TYPE)
-#define N_TYPE 036
#endif
#if !defined (N_STAB)
-#define N_STAB 0340
#endif
-
-/* The following type indicates the definition of a symbol as being
- an indirect reference to another symbol. The other symbol
- appears as an undefined reference, immediately following this symbol.
-
- Indirection is asymmetrical. The other symbol's value will be used
- to satisfy requests for the indirect symbol, but not vice versa.
- If the other symbol does not have a definition, libraries will
- be searched to find a definition. */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
- All the N_SET[ATDB] symbols with the same name form one set.
- Space is allocated for the set in the text section, and each set
- element's value is stored into one word of the space.
- The first word of the space is the length of the set (number of elements).
-
- The address of the set is made into an N_SETV symbol
- whose name is the same as the name of the set.
- This symbol acts like a N_DATA global symbol
- in that it can satisfy undefined external references. */
-
-/* These appear as input to LD, in a .o file. */
-#define N_SETA 0x14 /* Absolute set element symbol */
-#define N_SETT 0x16 /* Text set element symbol */
-#define N_SETD 0x18 /* Data set element symbol */
-#define N_SETB 0x1A /* Bss set element symbol */
-
-/* This is output from LD. */
-#define N_SETV 0x1C /* Pointer to set vector in data area. */
-
#if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
- The text-relocation section of the file is a vector of these structures,
- all of which apply to the text section.
- Likewise, the data-relocation section applies to the data section. */
-
-struct relocation_info
-{
- /* Address (within segment) to be relocated. */
- int r_address;
- /* The meaning of r_symbolnum depends on r_extern. */
- unsigned int r_symbolnum:24;
- /* Nonzero means value is a pc-relative offset
- and it should be relocated for changes in its own address
- as well as for changes in the symbol or section specified. */
- unsigned int r_pcrel:1;
- /* Length (as exponent of 2) of the field to be relocated.
- Thus, a value of 2 indicates 1<<2 bytes. */
- unsigned int r_length:2;
- /* 1 => relocate with value of symbol.
- r_symbolnum is the index of the symbol
- in file's the symbol table.
- 0 => relocate with the address of a segment.
- r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
- (the N_EXT bit may be set also, but signifies nothing). */
- unsigned int r_extern:1;
- /* Four bits that aren't used, but when writing an object file
- it is desirable to clear them. */
#ifdef NS32K
- unsigned r_bsr:1;
- unsigned r_disp:1;
- unsigned r_pad:2;
#else
- unsigned int r_pad:4;
#endif
-};
#endif /* no N_RELOCATION_INFO_DECLARED. */
-
#endif /*__ASSEMBLY__ */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
index d537aa0..4a5b7cb 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -11,109 +11,11 @@
* Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
*
*/
-
#ifndef _LINUX_ACCT_H
#define _LINUX_ACCT_H
-#include <linux/types.h>
-
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/*
- * comp_t is a 16-bit "floating" point number with a 3-bit base 8
- * exponent and a 13-bit fraction.
- * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- * (leading 1 not stored).
- * See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16 comp_t;
-typedef __u32 comp2_t;
-
-/*
- * accounting file record
- *
- * This structure contains all of the information written out to the
- * process accounting file whenever a process exits.
- */
+#include <uapi/linux/acct.h>
-#define ACCT_COMM 16
-
-struct acct
-{
- char ac_flag; /* Flags */
- char ac_version; /* Always set to ACCT_VERSION */
- /* for binary compatibility back until 2.0 */
- __u16 ac_uid16; /* LSB of Real User ID */
- __u16 ac_gid16; /* LSB of Real Group ID */
- __u16 ac_tty; /* Control Terminal */
- __u32 ac_btime; /* Process Creation Time */
- comp_t ac_utime; /* User Time */
- comp_t ac_stime; /* System Time */
- comp_t ac_etime; /* Elapsed Time */
- comp_t ac_mem; /* Average Memory Usage */
- comp_t ac_io; /* Chars Transferred */
- comp_t ac_rw; /* Blocks Read or Written */
- comp_t ac_minflt; /* Minor Pagefaults */
- comp_t ac_majflt; /* Major Pagefaults */
- comp_t ac_swaps; /* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
- __u16 ac_ahz; /* AHZ */
-#endif
- __u32 ac_exitcode; /* Exitcode */
- char ac_comm[ACCT_COMM + 1]; /* Command Name */
- __u8 ac_etime_hi; /* Elapsed Time MSB */
- __u16 ac_etime_lo; /* Elapsed Time LSB */
- __u32 ac_uid; /* Real User ID */
- __u32 ac_gid; /* Real Group ID */
-};
-
-struct acct_v3
-{
- char ac_flag; /* Flags */
- char ac_version; /* Always set to ACCT_VERSION */
- __u16 ac_tty; /* Control Terminal */
- __u32 ac_exitcode; /* Exitcode */
- __u32 ac_uid; /* Real User ID */
- __u32 ac_gid; /* Real Group ID */
- __u32 ac_pid; /* Process ID */
- __u32 ac_ppid; /* Parent Process ID */
- __u32 ac_btime; /* Process Creation Time */
-#ifdef __KERNEL__
- __u32 ac_etime; /* Elapsed Time */
-#else
- float ac_etime; /* Elapsed Time */
-#endif
- comp_t ac_utime; /* User Time */
- comp_t ac_stime; /* System Time */
- comp_t ac_mem; /* Average Memory Usage */
- comp_t ac_io; /* Chars Transferred */
- comp_t ac_rw; /* Blocks Read or Written */
- comp_t ac_minflt; /* Minor Pagefaults */
- comp_t ac_majflt; /* Major Pagefaults */
- comp_t ac_swaps; /* Number of Swaps */
- char ac_comm[ACCT_COMM]; /* Command Name */
-};
-
-/*
- * accounting flags
- */
- /* bit set when the process ... */
-#define AFORK 0x01 /* ... executed fork, but did not exec */
-#define ASU 0x02 /* ... used super-user privileges */
-#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */
-#define ACORE 0x08 /* ... dumped core */
-#define AXSIG 0x10 /* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
#ifdef CONFIG_BSD_PROCESS_ACCT
@@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t;
typedef struct acct acct_t;
#endif
-#else
-#define ACCT_VERSION 2
-#define AHZ (HZ)
-#endif /* __KERNEL */
-
-#ifdef __KERNEL__
#include <linux/jiffies.h>
/*
* Yet another set of HZ to *HZ helper functions.
@@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x)
return x;
}
-#endif /* __KERNEL */
-
#endif /* _LINUX_ACCT_H */
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 63bca50..cde4130 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -4,43 +4,8 @@
#ifndef __ADB_H
#define __ADB_H
-/* ADB commands */
-#define ADB_BUSRESET 0
-#define ADB_FLUSH(id) (0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4))
+#include <uapi/linux/adb.h>
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE 1 /* "software execution control" devices */
-#define ADB_KEYBOARD 2
-#define ADB_MOUSE 3
-#define ADB_TABLET 4
-#define ADB_MODEM 5
-#define ADB_MISC 7 /* maybe a monitor */
-
-#define ADB_RET_OK 0
-#define ADB_RET_TIMEOUT 3
-
-/* The kind of ADB request. The controller may emulate some
- or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET 0
-#define CUDA_PACKET 1
-#define ERROR_PACKET 2
-#define TIMER_PACKET 3
-#define POWER_PACKET 4
-#define MACIIC_PACKET 5
-#define PMU_PACKET 6
-#define ADB_QUERY 7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO 1
-
-#ifdef __KERNEL__
struct adb_request {
unsigned char data[32];
@@ -98,6 +63,4 @@ int adb_reset_bus(void);
int adb_try_handler_change(int address, int new_id);
int adb_get_infos(int address, int *original_address, int *handler_id);
-#endif /* __KERNEL__ */
-
#endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
index b19801f..0d99107 100644
--- a/include/linux/adfs_fs.h
+++ b/include/linux/adfs_fs.h
@@ -1,47 +1,9 @@
#ifndef _ADFS_FS_H
#define _ADFS_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/adfs_fs.h>
/*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
- __u8 log2secsize;
- __u8 secspertrack;
- __u8 heads;
- __u8 density;
- __u8 idlen;
- __u8 log2bpmb;
- __u8 skew;
- __u8 bootoption;
- __u8 lowsector;
- __u8 nzones;
- __le16 zone_spare;
- __le32 root;
- __le32 disc_size;
- __le16 disc_id;
- __u8 disc_name[10];
- __le32 disc_type;
- __le32 disc_size_high;
- __u8 log2sharesize:4;
- __u8 unused40:4;
- __u8 big_flag:1;
- __u8 unused41:1;
- __u8 nzones_high;
- __le32 format_version;
- __le32 root_size;
- __u8 unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD (0xc00)
-#define ADFS_DR_OFFSET (0x1c0)
-#define ADFS_DR_SIZE 60
-#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
-/*
* Calculate the boot block checksum on an ADFS drive. Note that this will
* appear to be correct if the sector contains all zeros, so also check that
* the disk size is non-zero!!!
@@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr)
return (result & 0xff) != ptr[511];
}
#endif
-
-#endif
diff --git a/include/linux/affs_hardblocks.h b/include/linux/affs_hardblocks.h
deleted file mode 100644
index f1b948c..0000000
--- a/include/linux/affs_hardblocks.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef AFFS_HARDBLOCKS_H
-#define AFFS_HARDBLOCKS_H
-
-#include <linux/types.h>
-
-/* Just the needed definitions for the RDB of an Amiga HD. */
-
-struct RigidDiskBlock {
- __u32 rdb_ID;
- __be32 rdb_SummedLongs;
- __s32 rdb_ChkSum;
- __u32 rdb_HostID;
- __be32 rdb_BlockBytes;
- __u32 rdb_Flags;
- __u32 rdb_BadBlockList;
- __be32 rdb_PartitionList;
- __u32 rdb_FileSysHeaderList;
- __u32 rdb_DriveInit;
- __u32 rdb_Reserved1[6];
- __u32 rdb_Cylinders;
- __u32 rdb_Sectors;
- __u32 rdb_Heads;
- __u32 rdb_Interleave;
- __u32 rdb_Park;
- __u32 rdb_Reserved2[3];
- __u32 rdb_WritePreComp;
- __u32 rdb_ReducedWrite;
- __u32 rdb_StepRate;
- __u32 rdb_Reserved3[5];
- __u32 rdb_RDBBlocksLo;
- __u32 rdb_RDBBlocksHi;
- __u32 rdb_LoCylinder;
- __u32 rdb_HiCylinder;
- __u32 rdb_CylBlocks;
- __u32 rdb_AutoParkSeconds;
- __u32 rdb_HighRDSKBlock;
- __u32 rdb_Reserved4;
- char rdb_DiskVendor[8];
- char rdb_DiskProduct[16];
- char rdb_DiskRevision[4];
- char rdb_ControllerVendor[8];
- char rdb_ControllerProduct[16];
- char rdb_ControllerRevision[4];
- __u32 rdb_Reserved5[10];
-};
-
-#define IDNAME_RIGIDDISK 0x5244534B /* "RDSK" */
-
-struct PartitionBlock {
- __be32 pb_ID;
- __be32 pb_SummedLongs;
- __s32 pb_ChkSum;
- __u32 pb_HostID;
- __be32 pb_Next;
- __u32 pb_Flags;
- __u32 pb_Reserved1[2];
- __u32 pb_DevFlags;
- __u8 pb_DriveName[32];
- __u32 pb_Reserved2[15];
- __be32 pb_Environment[17];
- __u32 pb_EReserved[15];
-};
-
-#define IDNAME_PARTITION 0x50415254 /* "PART" */
-
-#define RDB_ALLOCATION_LIMIT 16
-
-#endif /* AFFS_HARDBLOCKS_H */
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index f6778ec..c6b61ca 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -23,94 +23,12 @@
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
-
#ifndef _AGP_H
#define _AGP_H 1
-#define AGPIOC_BASE 'A'
-#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
- __u16 major;
- __u16 minor;
-};
-
-typedef struct _agp_info {
- struct agp_version version; /* version of the driver */
- __u32 bridge_id; /* bridge vendor/device */
- __u32 agp_mode; /* mode info of bridge */
- unsigned long aper_base;/* base of aperture */
- size_t aper_size; /* size of aperture */
- size_t pg_total; /* max pages (swap + system) */
- size_t pg_system; /* max pages (system) */
- size_t pg_used; /* current pages used */
-} agp_info;
-
-typedef struct _agp_setup {
- __u32 agp_mode; /* mode info of bridge */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
- __kernel_off_t pg_start; /* starting page to populate */
- __kernel_size_t pg_count; /* number of pages */
- int prot; /* prot flags for mmap */
-} agp_segment;
-
-typedef struct _agp_region {
- __kernel_pid_t pid; /* pid of process */
- __kernel_size_t seg_count; /* number of segments */
- struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
- int key; /* tag of allocation */
- __kernel_size_t pg_count;/* number of pages */
- __u32 type; /* 0 == normal, other devspec */
- __u32 physical; /* device specific (some devices
- * need a phys address of the
- * actual page behind the gatt
- * table) */
-} agp_allocate;
-
-typedef struct _agp_bind {
- int key; /* tag of allocation */
- __kernel_off_t pg_start;/* starting page to populate */
-} agp_bind;
-
-typedef struct _agp_unbind {
- int key; /* tag of allocation */
- __u32 priority; /* priority for paging out */
-} agp_unbind;
-
-#else /* __KERNEL__ */
#include <linux/mutex.h>
#include <linux/agp_backend.h>
+#include <uapi/linux/agpgart.h>
#define AGPGART_MINOR 175
@@ -209,6 +127,4 @@ struct agp_front_data {
bool backend_acquired;
};
-#endif /* __KERNEL__ */
-
#endif /* _AGP_H */
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
deleted file mode 100644
index 86fa7a7..0000000
--- a/include/linux/aio_abi.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* include/linux/aio_abi.h
- *
- * Copyright 2000,2001,2002 Red Hat.
- *
- * Written by Benjamin LaHaise <bcrl@kvack.org>
- *
- * Distribute under the terms of the GPLv2 (see ../../COPYING) or under
- * the following terms.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. Red Hat makes no representations about
- * the suitability of this software for any purpose.
- *
- * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
- * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
- * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
- * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
- * ENHANCEMENTS, OR MODIFICATIONS.
- */
-#ifndef __LINUX__AIO_ABI_H
-#define __LINUX__AIO_ABI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-typedef __kernel_ulong_t aio_context_t;
-
-enum {
- IOCB_CMD_PREAD = 0,
- IOCB_CMD_PWRITE = 1,
- IOCB_CMD_FSYNC = 2,
- IOCB_CMD_FDSYNC = 3,
- /* These two are experimental.
- * IOCB_CMD_PREADX = 4,
- * IOCB_CMD_POLL = 5,
- */
- IOCB_CMD_NOOP = 6,
- IOCB_CMD_PREADV = 7,
- IOCB_CMD_PWRITEV = 8,
-};
-
-/*
- * Valid flags for the "aio_flags" member of the "struct iocb".
- *
- * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
- * is valid.
- */
-#define IOCB_FLAG_RESFD (1 << 0)
-
-/* read() from /dev/aio returns these structures. */
-struct io_event {
- __u64 data; /* the data field from the iocb */
- __u64 obj; /* what iocb this event came from */
- __s64 res; /* result code for this event */
- __s64 res2; /* secondary result */
-};
-
-#if defined(__LITTLE_ENDIAN)
-#define PADDED(x,y) x, y
-#elif defined(__BIG_ENDIAN)
-#define PADDED(x,y) y, x
-#else
-#error edit for your odd byteorder.
-#endif
-
-/*
- * we always use a 64bit off_t when communicating
- * with userland. its up to libraries to do the
- * proper padding and aio_error abstraction
- */
-
-struct iocb {
- /* these are internal to the kernel/libc. */
- __u64 aio_data; /* data to be returned in event's data */
- __u32 PADDED(aio_key, aio_reserved1);
- /* the kernel sets aio_key to the req # */
-
- /* common fields */
- __u16 aio_lio_opcode; /* see IOCB_CMD_ above */
- __s16 aio_reqprio;
- __u32 aio_fildes;
-
- __u64 aio_buf;
- __u64 aio_nbytes;
- __s64 aio_offset;
-
- /* extra parameters */
- __u64 aio_reserved2; /* TODO: use this for a (struct sigevent *) */
-
- /* flags for the "struct iocb" */
- __u32 aio_flags;
-
- /*
- * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
- * eventfd to signal AIO readiness to
- */
- __u32 aio_resfd;
-}; /* 64 bytes */
-
-#undef IFBIG
-#undef IFLITTLE
-
-#endif /* __LINUX__AIO_ABI_H */
-
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 01a6244..9c3a871 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
/*
* Include file for the interface to an APM BIOS
* Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
@@ -15,25 +12,11 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
-#include <linux/types.h>
-
-typedef unsigned short apm_event_t;
-typedef unsigned short apm_eventinfo_t;
-
-struct apm_bios_info {
- __u16 version;
- __u16 cseg;
- __u32 offset;
- __u16 cseg_16;
- __u16 dseg;
- __u16 flags;
- __u16 cseg_len;
- __u16 cseg_16_len;
- __u16 dseg_len;
-};
+#include <uapi/linux/apm_bios.h>
-#ifdef __KERNEL__
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
@@ -110,111 +93,9 @@ struct apm_info {
*/
extern struct apm_info apm_info;
-#endif /* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY 0x0000
-#define APM_STATE_STANDBY 0x0001
-#define APM_STATE_SUSPEND 0x0002
-#define APM_STATE_OFF 0x0003
-#define APM_STATE_BUSY 0x0004
-#define APM_STATE_REJECT 0x0005
-#define APM_STATE_OEM_SYS 0x0020
-#define APM_STATE_OEM_DEV 0x0040
-
-#define APM_STATE_DISABLE 0x0000
-#define APM_STATE_ENABLE 0x0001
-
-#define APM_STATE_DISENGAGE 0x0000
-#define APM_STATE_ENGAGE 0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY 0x0001
-#define APM_SYS_SUSPEND 0x0002
-#define APM_NORMAL_RESUME 0x0003
-#define APM_CRITICAL_RESUME 0x0004
-#define APM_LOW_BATTERY 0x0005
-#define APM_POWER_STATUS_CHANGE 0x0006
-#define APM_UPDATE_TIME 0x0007
-#define APM_CRITICAL_SUSPEND 0x0008
-#define APM_USER_STANDBY 0x0009
-#define APM_USER_SUSPEND 0x000a
-#define APM_STANDBY_RESUME 0x000b
-#define APM_CAPABILITY_CHANGE 0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS 0x00
-#define APM_DISABLED 0x01
-#define APM_CONNECTED 0x02
-#define APM_NOT_CONNECTED 0x03
-#define APM_16_CONNECTED 0x05
-#define APM_16_UNSUPPORTED 0x06
-#define APM_32_CONNECTED 0x07
-#define APM_32_UNSUPPORTED 0x08
-#define APM_BAD_DEVICE 0x09
-#define APM_BAD_PARAM 0x0a
-#define APM_NOT_ENGAGED 0x0b
-#define APM_BAD_FUNCTION 0x0c
-#define APM_RESUME_DISABLED 0x0d
-#define APM_NO_ERROR 0x53
-#define APM_BAD_STATE 0x60
-#define APM_NO_EVENTS 0x80
-#define APM_NOT_PRESENT 0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS 0x0000
-#define APM_DEVICE_ALL 0x0001
-#define APM_DEVICE_DISPLAY 0x0100
-#define APM_DEVICE_STORAGE 0x0200
-#define APM_DEVICE_PARALLEL 0x0300
-#define APM_DEVICE_SERIAL 0x0400
-#define APM_DEVICE_NETWORK 0x0500
-#define APM_DEVICE_PCMCIA 0x0600
-#define APM_DEVICE_BATTERY 0x8000
-#define APM_DEVICE_OEM 0xe000
-#define APM_DEVICE_OLD_ALL 0xffff
-#define APM_DEVICE_CLASS 0x00ff
-#define APM_DEVICE_MASK 0xff00
-
-#ifdef __KERNEL__
/*
* This is the "All Devices" ID communicated to the BIOS
*/
#define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \
APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES 2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY 0x0001
-#define APM_CAP_GLOBAL_SUSPEND 0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */
-#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY _IO('A', 1)
-#define APM_IOC_SUSPEND _IO('A', 2)
-
#endif /* LINUX_APM_H */
diff --git a/include/linux/arcfb.h b/include/linux/arcfb.h
deleted file mode 100644
index 721e765..0000000
--- a/include/linux/arcfb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __LINUX_ARCFB_H__
-#define __LINUX_ARCFB_H__
-
-#define FBIO_WAITEVENT _IO('F', 0x88)
-#define FBIO_GETCONTROL2 _IOR('F', 0x89, size_t)
-
-#endif
-
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index f57c368..73fd8b7 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,49 +1,9 @@
#ifndef __LINUX_ATALK_H__
#define __LINUX_ATALK_H__
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST 1
-#define ATPORT_RESERVED 128
-#define ATPORT_LAST 254 /* 254 is only legal on localtalk */
-#define ATADDR_ANYNET (__u16)0
-#define ATADDR_ANYNODE (__u8)0
-#define ATADDR_ANYPORT (__u8)0
-#define ATADDR_BCAST (__u8)255
-#define DDP_MAXSZ 587
-#define DDP_MAXHOPS 15 /* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
- __be16 s_net;
- __u8 s_node;
-};
-
-struct sockaddr_at {
- __kernel_sa_family_t sat_family;
- __u8 sat_port;
- struct atalk_addr sat_addr;
- char sat_zero[8];
-};
-
-struct atalk_netrange {
- __u8 nr_phase;
- __be16 nr_firstnet;
- __be16 nr_lastnet;
-};
-
-#ifdef __KERNEL__
#include <net/sock.h>
+#include <uapi/linux/atalk.h>
struct atalk_route {
struct net_device *dev;
@@ -205,5 +165,4 @@ extern void atalk_proc_exit(void);
#define atalk_proc_exit() do { } while(0)
#endif /* CONFIG_PROC_FS */
-#endif /* __KERNEL__ */
#endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
index d3b2921..30006c4 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -1,242 +1,9 @@
/* atm.h - general ATM declarations */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- * Instead, #include <atm.h>
- */
-
#ifndef _LINUX_ATM_H
#define _LINUX_ATM_H
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD 48 /* ATM payload size */
-#define ATM_AAL0_SDU 52 /* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV 9999 /* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */
-
-#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */
-#define ATM_MAX_VCI 65535 /* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL 0 /* AAL not specified */
-#define ATM_AAL0 13 /* "raw" ATM cells */
-#define ATM_AAL1 1 /* AAL1 (CBR) */
-#define ATM_AAL2 2 /* AAL2 (VBR) */
-#define ATM_AAL34 3 /* AAL3/4 (data) */
-#define ATM_AAL5 5 /* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level. On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \
- sizeof(t))
-#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c) (((c) >> 16) & 0x3f)
-#define __SO_SIZE(c) ((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int)
- /* set CLP bit value - TODO */
-#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange)
- /* connection identifier range; socket must be
- bound or connected */
-#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos)
- /* Quality of Service setting */
-#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap)
- /* Service Access Point */
-#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
- /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int)
- /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK 0xf0000000
-#define ATM_HDR_GFC_SHIFT 28
-#define ATM_HDR_VPI_MASK 0x0ff00000
-#define ATM_HDR_VPI_SHIFT 20
-#define ATM_HDR_VCI_MASK 0x000ffff0
-#define ATM_HDR_VCI_SHIFT 4
-#define ATM_HDR_PTI_MASK 0x0000000e
-#define ATM_HDR_PTI_SHIFT 1
-#define ATM_HDR_CLP 0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV 7 /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE 0 /* no traffic */
-#define ATM_UBR 1
-#define ATM_CBR 2
-#define ATM_VBR 3
-#define ATM_ABR 4
-#define ATM_ANYCLASS 5 /* compatible with everything */
-
-#define ATM_MAX_PCR -1 /* maximum available PCR */
-
-struct atm_trafprm {
- unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
- int max_pcr; /* maximum PCR in cells per second */
- int pcr; /* desired PCR in cells per second */
- int min_pcr; /* minimum PCR in cells per second */
- int max_cdv; /* maximum CDV in microseconds */
- int max_sdu; /* maximum SDU in bytes */
- /* extra params for ABR */
- unsigned int icr; /* Initial Cell Rate (24-bit) */
- unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
- unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */
- unsigned int rif : 4; /* Rate Increment Factor (4-bit) */
- unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */
- unsigned int nrm_pres :1; /* nrm present bit */
- unsigned int trm_pres :1; /* rm present bit */
- unsigned int adtf_pres :1; /* adtf present bit */
- unsigned int cdf_pres :1; /* cdf present bit*/
- unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */
- unsigned int trm :3; /* Time between forward RM cells (3-bit) */
- unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */
- unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */
- unsigned int spare :9; /* spare bits */
-};
-
-struct atm_qos {
- struct atm_trafprm txtp; /* parameters in TX direction */
- struct atm_trafprm rxtp __ATM_API_ALIGN;
- /* parameters in RX direction */
- unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY -1 /* "magic" PVC address values */
-#define ATM_VPI_ANY -1
-#define ATM_VCI_ANY -1
-#define ATM_VPI_UNSPEC -2
-#define ATM_VCI_UNSPEC -2
-
-
-struct sockaddr_atmpvc {
- unsigned short sap_family; /* address family, AF_ATMPVC */
- struct { /* PVC address */
- short itf; /* ATM interface */
- short vpi; /* VPI (only 8 bits at UNI) */
- int vci; /* VCI (only 16 bits at UNI) */
- } sap_addr __ATM_API_ALIGN; /* PVC address */
-};
-
-/* SVC addressing */
-
-#define ATM_ESA_LEN 20 /* ATM End System Address length */
-#define ATM_E164_LEN 12 /* maximum E.164 number length */
-
-#define ATM_AFI_DCC 0x39 /* DCC ATM Format */
-#define ATM_AFI_ICD 0x47 /* ICD ATM Format */
-#define ATM_AFI_E164 0x45 /* E.164 ATM Format */
-#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */
-
-#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */
+#include <uapi/linux/atm.h>
-#define ATM_LIJ_NONE 0 /* no leaf-initiated join */
-#define ATM_LIJ 1 /* request joining */
-#define ATM_LIJ_RPJ 2 /* set to root-prompted join */
-#define ATM_LIJ_NJ 3 /* set to network join */
-
-
-struct sockaddr_atmsvc {
- unsigned short sas_family; /* address family, AF_ATMSVC */
- struct { /* SVC address */
- unsigned char prv[ATM_ESA_LEN];/* private ATM address */
- char pub[ATM_E164_LEN+1]; /* public address (E.164) */
- /* unused addresses must be bzero'ed */
- char lij_type; /* role in LIJ call; one of ATM_LIJ* */
- __u32 lij_id; /* LIJ call identifier */
- } sas_addr __ATM_API_ALIGN; /* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
- return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
- return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
- int number;
- int length;
- void __user *arg;
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
struct compat_atmif_sioc {
@@ -246,6 +13,3 @@ struct compat_atmif_sioc {
};
#endif
#endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/include/linux/atm_eni.h b/include/linux/atm_eni.h
deleted file mode 100644
index 34f3179..0000000
--- a/include/linux/atm_eni.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
- driver-specific utilities) */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ENI_H
-#define LINUX_ATM_ENI_H
-
-#include <linux/atmioc.h>
-
-
-struct eni_multipliers {
- int tx,rx; /* values are in percent and must be > 100 */
-};
-
-
-#define ENI_MEMDUMP _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
- /* printk memory map */
-#define ENI_SETMULT _IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
- /* set buffer multipliers */
-
-#endif
diff --git a/include/linux/atm_he.h b/include/linux/atm_he.h
deleted file mode 100644
index 2a7713b..0000000
--- a/include/linux/atm_he.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* atm_he.h */
-
-#ifndef LINUX_ATM_HE_H
-#define LINUX_ATM_HE_H
-
-#include <linux/atmioc.h>
-
-#define HE_GET_REG _IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
-
-#define HE_REGTYPE_PCI 1
-#define HE_REGTYPE_RCM 2
-#define HE_REGTYPE_TCM 3
-#define HE_REGTYPE_MBOX 4
-
-struct he_ioctl_reg {
- unsigned addr, val;
- char type;
-};
-
-#endif /* LINUX_ATM_HE_H */
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
deleted file mode 100644
index 8b72400..0000000
--- a/include/linux/atm_idt77105.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
- * use by driver-specific utilities) */
-
-/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
-
-
-#ifndef LINUX_ATM_IDT77105_H
-#define LINUX_ATM_IDT77105_H
-
-#include <linux/types.h>
-#include <linux/atmioc.h>
-#include <linux/atmdev.h>
-
-/*
- * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
- * Pointed to by `arg' in atmif_sioc.
- */
-struct idt77105_stats {
- __u32 symbol_errors; /* wire symbol errors */
- __u32 tx_cells; /* cells transmitted */
- __u32 rx_cells; /* cells received */
- __u32 rx_hec_errors; /* Header Error Check errors on receive */
-};
-
-#define IDT77105_GETSTAT _IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc) /* get stats */
-#define IDT77105_GETSTATZ _IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc) /* get stats and zero */
-
-#endif
diff --git a/include/linux/atm_nicstar.h b/include/linux/atm_nicstar.h
deleted file mode 100644
index 577b79f..0000000
--- a/include/linux/atm_nicstar.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/******************************************************************************
- *
- * atm_nicstar.h
- *
- * Driver-specific declarations for use by NICSTAR driver specific utils.
- *
- * Author: Rui Prior
- *
- * (C) INESC 1998
- *
- ******************************************************************************/
-
-
-#ifndef LINUX_ATM_NICSTAR_H
-#define LINUX_ATM_NICSTAR_H
-
-/* Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define NS_GETPSTAT _IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
- /* get pool statistics */
-#define NS_SETBUFLEV _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
- /* set buffer level markers */
-#define NS_ADJBUFLEV _IO('a',ATMIOC_SARPRV+3)
- /* adjust buffer level */
-
-typedef struct buf_nr
-{
- unsigned min;
- unsigned init;
- unsigned max;
-}buf_nr;
-
-
-typedef struct pool_levels
-{
- int buftype;
- int count; /* (At least for now) only used in NS_GETPSTAT */
- buf_nr level;
-} pool_levels;
-
-/* type must be one of the following: */
-#define NS_BUFTYPE_SMALL 1
-#define NS_BUFTYPE_LARGE 2
-#define NS_BUFTYPE_HUGE 3
-#define NS_BUFTYPE_IOVEC 4
-
-
-#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 375638f..db6b65f 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -3,61 +3,11 @@
/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
-
#ifndef LINUX_ATM_TCP_H
#define LINUX_ATM_TCP_H
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
- __u16 vpi;
- __u16 vci;
- __u32 length; /* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */
-#define ATMTCP_CTRL_OPEN 1 /* request/reply */
-#define ATMTCP_CTRL_CLOSE 2 /* request/reply */
+#include <uapi/linux/atm_tcp.h>
-struct atmtcp_control {
- struct atmtcp_hdr hdr; /* must be first */
- int type; /* message type; both directions */
- atm_kptr_t vcc; /* both directions */
- struct sockaddr_atmpvc addr; /* suggested value from kernel */
- struct atm_qos qos; /* both directions */
- int result; /* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type dir. hdr.v?i type addr qos vcc result
- * ----------- ---- ------- ---- ---- --- --- ------
- * OPEN K->D Y Y Y Y Y 0
- * OPEN D->K - Y Y Y Y Y
- * CLOSE K->D - - Y - Y 0
- * CLOSE D->K - - - - Y Y
- */
-
-#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */
-#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP
- interface */
-#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP
- interface */
-
-
-#ifdef __KERNEL__
struct atm_tcp_ops {
int (*attach)(struct atm_vcc *vcc,int itf);
@@ -69,5 +19,3 @@ struct atm_tcp_ops {
extern struct atm_tcp_ops atm_tcp_ops;
#endif
-
-#endif
diff --git a/include/linux/atm_zatm.h b/include/linux/atm_zatm.h
deleted file mode 100644
index 10f0fa2..0000000
--- a/include/linux/atm_zatm.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
- driver-specific utilities) */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ZATM_H
-#define LINUX_ATM_ZATM_H
-
-/*
- * Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
- /* get pool statistics */
-#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
- /* get statistics and zero */
-#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
- /* set pool parameters */
-
-struct zatm_pool_info {
- int ref_count; /* free buffer pool usage counters */
- int low_water,high_water; /* refill parameters */
- int rqa_count,rqu_count; /* queue condition counters */
- int offset,next_off; /* alignment optimizations: offset */
- int next_cnt,next_thres; /* repetition counter and threshold */
-};
-
-struct zatm_pool_req {
- int pool_num; /* pool number */
- struct zatm_pool_info info; /* actual information */
-};
-
-struct zatm_t_hist {
- struct timeval real; /* real (wall-clock) time */
- struct timeval expected; /* expected real time */
-};
-
-
-#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */
-#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */
-#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */
-#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
-
-#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to
- record; must be 2^n */
-
-#endif
diff --git a/include/linux/atmapi.h b/include/linux/atmapi.h
deleted file mode 100644
index 8fe54d9..0000000
--- a/include/linux/atmapi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* atmapi.h - ATM API user space/kernel compatibility */
-
-/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
-
-
-#ifndef _LINUX_ATMAPI_H
-#define _LINUX_ATMAPI_H
-
-#if defined(__sparc__) || defined(__ia64__)
-/* such alignment is not required on 32 bit sparcs, but we can't
- figure that we are on a sparc64 while compiling user-space programs. */
-#define __ATM_API_ALIGN __attribute__((aligned(8)))
-#else
-#define __ATM_API_ALIGN
-#endif
-
-
-/*
- * Opaque type for kernel pointers. Note that _ is never accessed. We need
- * the struct in order hide the array, so that we can make simple assignments
- * instead of being forced to use memcpy. It also improves error reporting for
- * code that still assumes that we're passing unsigned longs.
- *
- * Convention: NULL pointers are passed as a field of all zeroes.
- */
-
-typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
-
-#endif
diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h
deleted file mode 100644
index 231f4bd..0000000
--- a/include/linux/atmarp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef _LINUX_ATMARP_H
-#define _LINUX_ATMARP_H
-
-#include <linux/types.h>
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-
-#define ATMARP_RETRY_DELAY 30 /* request next resolution or forget
- NAK after 30 sec - should go into
- atmclip.h */
-#define ATMARP_MAX_UNRES_PACKETS 5 /* queue that many packets while
- waiting for the resolver */
-
-
-#define ATMARPD_CTRL _IO('a',ATMIOC_CLIP+1) /* become atmarpd ctrl sock */
-#define ATMARP_MKIP _IO('a',ATMIOC_CLIP+2) /* attach socket to IP */
-#define ATMARP_SETENTRY _IO('a',ATMIOC_CLIP+3) /* fill or hide ARP entry */
-#define ATMARP_ENCAP _IO('a',ATMIOC_CLIP+5) /* change encapsulation */
-
-
-enum atmarp_ctrl_type {
- act_invalid, /* catch uninitialized structures */
- act_need, /* need address resolution */
- act_up, /* interface is coming up */
- act_down, /* interface is going down */
- act_change /* interface configuration has changed */
-};
-
-struct atmarp_ctrl {
- enum atmarp_ctrl_type type; /* message type */
- int itf_num;/* interface number (if present) */
- __be32 ip; /* IP address (act_need only) */
-};
-
-#endif
diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h
deleted file mode 100644
index fdb2629..0000000
--- a/include/linux/atmbr2684.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _LINUX_ATMBR2684_H
-#define _LINUX_ATMBR2684_H
-
-#include <linux/types.h>
-#include <linux/atm.h>
-#include <linux/if.h> /* For IFNAMSIZ */
-
-/*
- * Type of media we're bridging (ethernet, token ring, etc) Currently only
- * ethernet is supported
- */
-#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */
-#define BR2684_MEDIA_802_4 (1) /* 802.4 */
-#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */
-#define BR2684_MEDIA_FDDI (3)
-#define BR2684_MEDIA_802_6 (4) /* 802.6 */
-
- /* used only at device creation: */
-#define BR2684_FLAG_ROUTED (1<<16) /* payload is routed, not bridged */
-
-/*
- * Is there FCS inbound on this VC? This currently isn't supported.
- */
-#define BR2684_FCSIN_NO (0)
-#define BR2684_FCSIN_IGNORE (1)
-#define BR2684_FCSIN_VERIFY (2)
-
-/*
- * Is there FCS outbound on this VC? This currently isn't supported.
- */
-#define BR2684_FCSOUT_NO (0)
-#define BR2684_FCSOUT_SENDZERO (1)
-#define BR2684_FCSOUT_GENERATE (2)
-
-/*
- * Does this VC include LLC encapsulation?
- */
-#define BR2684_ENCAPS_VC (0) /* VC-mux */
-#define BR2684_ENCAPS_LLC (1)
-#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
-
-/*
- * Is this VC bridged or routed?
- */
-
-#define BR2684_PAYLOAD_ROUTED (0)
-#define BR2684_PAYLOAD_BRIDGED (1)
-
-/*
- * This is for the ATM_NEWBACKENDIF call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_newif_br2684 {
- atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
- int media; /* BR2684_MEDIA_*, flags in upper bits */
- char ifname[IFNAMSIZ];
- int mtu;
-};
-
-/*
- * This structure is used to specify a br2684 interface - either by a
- * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
- */
-#define BR2684_FIND_BYNOTHING (0)
-#define BR2684_FIND_BYNUM (1)
-#define BR2684_FIND_BYIFNAME (2)
-struct br2684_if_spec {
- int method; /* BR2684_FIND_* */
- union {
- char ifname[IFNAMSIZ];
- int devnum;
- } spec;
-};
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_br2684 {
- atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
- struct br2684_if_spec ifspec;
- int fcs_in; /* BR2684_FCSIN_* */
- int fcs_out; /* BR2684_FCSOUT_* */
- int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
- int encaps; /* BR2684_ENCAPS_* */
- int has_vpiid; /* 1: use vpn_id - Unsupported */
- __u8 vpn_id[7];
- int send_padding; /* unsupported */
- int min_size; /* we will pad smaller packets than this */
-};
-
-/*
- * The BR2684_SETFILT ioctl is an experimental mechanism for folks
- * terminating a large number of IP-only vcc's. When netfilter allows
- * efficient per-if in/out filters, this support will be removed
- */
-struct br2684_filter {
- __be32 prefix; /* network byte order */
- __be32 netmask; /* 0 = disable filter */
-};
-
-struct br2684_filter_set {
- struct br2684_if_spec ifspec;
- struct br2684_filter filter;
-};
-
-enum br2684_payload {
- p_routed = BR2684_PAYLOAD_ROUTED,
- p_bridged = BR2684_PAYLOAD_BRIDGED,
-};
-
-#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
- struct br2684_filter_set)
-
-#endif /* _LINUX_ATMBR2684_H */
diff --git a/include/linux/atmclip.h b/include/linux/atmclip.h
deleted file mode 100644
index 02c94c4..0000000
--- a/include/linux/atmclip.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* atmclip.h - Classical IP over ATM */
-
-/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATMCLIP_H
-#define LINUX_ATMCLIP_H
-
-#include <linux/sockios.h>
-#include <linux/atmioc.h>
-
-
-#define RFC1483LLC_LEN 8 /* LLC+OUI+PID = 8 */
-#define RFC1626_MTU 9180 /* RFC1626 default MTU */
-
-#define CLIP_DEFAULT_IDLETIMER 1200 /* 20 minutes, see RFC1755 */
-#define CLIP_CHECK_INTERVAL 10 /* check every ten seconds */
-
-#define SIOCMKCLIP _IO('a',ATMIOC_CLIP) /* create IP interface */
-
-#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 06fd4bb..22ef21c 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -1,218 +1,8 @@
/* atmdev.h - ATM device driver declarations and various related items */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
#ifndef LINUX_ATMDEV_H
#define LINUX_ATMDEV_H
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN 6
-
-#define ATM_OC3_PCR (155520000/270*260/8/53)
- /* OC3 link rate: 155520000 bps
- SONET overhead: /270*260 (9 section, 1 path)
- bits per cell: /8/53
- max cell rate: 353207.547 cells/sec */
-#define ATM_25_PCR ((25600000/8-8000)/54)
- /* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR (622080000/1080*1040/8/53)
- /* OC12 link rate: 622080000 bps
- SONET overhead: /1080*1040
- bits per cell: /8/53
- max cell rate: 1412830.188 cells/sec */
-#define ATM_DS3_PCR (8000*12)
- /* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
- __HANDLE_ITEM(tx); /* TX okay */ \
- __HANDLE_ITEM(tx_err); /* TX errors */ \
- __HANDLE_ITEM(rx); /* RX okay */ \
- __HANDLE_ITEM(rx_err); /* RX errors */ \
- __HANDLE_ITEM(rx_drop); /* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
- __AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
- struct atm_aal_stats aal0;
- struct atm_aal_stats aal34;
- struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
- /* get link rate */
-#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
- /* get interface names (numbers) */
-#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
- /* get interface type name */
-#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
- /* get interface ESI */
-#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
- /* get itf's local ATM addr. list */
-#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
- /* reset itf's ATM address list */
-#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
- /* add a local ATM address */
-#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
- /* remove a local ATM address */
-#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
- /* get connection identifier range */
-#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
- /* set connection identifier range */
-#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
- /* set interface ESI */
-#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
- /* force interface ESI */
-#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
- /* register a LECS address */
-#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
- /* unregister a LECS address */
-#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
- /* retrieve LECS address(es) */
-
-#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
- /* get AAL layer statistics */
-#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
- /* get AAL layer statistics and zero */
-#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
- /* get loopback mode */
-#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
- /* set loopback mode */
-#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
- /* query supported loopback modes */
-#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
- /* enable or disable single-copy */
-#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
- /* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
- /* use backend to make new if */
-#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- /* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
- /* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above. In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW 0
-#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
-#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
-#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
-/* RESERVED 4 loop back on PHY side ---' */
-#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
-#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n) ((n) & 0xff)
-#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE 0 /* no loopback */
-
-#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
- int length;
- void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
-
-struct atm_cirange {
- signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
- signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX 1024 /* enable RX single-copy */
-#define ATM_SC_TX 2048 /* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
- anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED 1 /* Block until change is effective */
-#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
-#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
-#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
-#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
-#define ATM_MF_BWD 32 /* Set the backward direction parameters */
-
-#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
- ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE 0 /* VC is not used */
-#define ATM_VS_CONNECTED 1 /* VC is connected */
-#define ATM_VS_CLOSING 2 /* VC is closing */
-#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
-#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND 5 /* VC is bound */
-
-#define ATM_VS2TXT_MAP \
- "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
- "ADDR", "READY", "PARTIAL", "REGIS", \
- "RELEASED", "HASQOS", "LISTEN", "META", \
- "256", "512", "1024", "2048", \
- "SESSION", "HASSAP", "BOUND", "CLOSE"
-
-
-#ifdef __KERNEL__
-
#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
@@ -221,6 +11,7 @@ struct atm_cirange {
#include <linux/uio.h>
#include <net/sock.h>
#include <linux/atomic.h>
+#include <uapi/linux/atmdev.h>
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
@@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *);
int register_atmdevice_notifier(struct notifier_block *nb);
void unregister_atmdevice_notifier(struct notifier_block *nb);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/atmioc.h b/include/linux/atmioc.h
deleted file mode 100644
index 37f67aa..0000000
--- a/include/linux/atmioc.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmioc.h - ranges for ATM-related ioctl numbers */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-/*
- * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
- * "magic" ioctl numbers.
- */
-
-
-#ifndef _LINUX_ATMIOC_H
-#define _LINUX_ATMIOC_H
-
-#include <asm/ioctl.h>
- /* everybody including atmioc.h will also need _IO{,R,W,WR} */
-
-#define ATMIOC_PHYCOM 0x00 /* PHY device common ioctls, globally unique */
-#define ATMIOC_PHYCOM_END 0x0f
-#define ATMIOC_PHYTYP 0x10 /* PHY dev type ioctls, unique per PHY type */
-#define ATMIOC_PHYTYP_END 0x2f
-#define ATMIOC_PHYPRV 0x30 /* PHY dev private ioctls, unique per driver */
-#define ATMIOC_PHYPRV_END 0x4f
-#define ATMIOC_SARCOM 0x50 /* SAR device common ioctls, globally unique */
-#define ATMIOC_SARCOM_END 0x50
-#define ATMIOC_SARPRV 0x60 /* SAR dev private ioctls, unique per driver */
-#define ATMIOC_SARPRV_END 0x7f
-#define ATMIOC_ITF 0x80 /* Interface ioctls, globally unique */
-#define ATMIOC_ITF_END 0x8f
-#define ATMIOC_BACKEND 0x90 /* ATM generic backend ioctls, u. per backend */
-#define ATMIOC_BACKEND_END 0xaf
-/* 0xb0-0xbf: Reserved for future use */
-#define ATMIOC_AREQUIPA 0xc0 /* Application requested IP over ATM, glob. u. */
-#define ATMIOC_LANE 0xd0 /* LAN Emulation, globally unique */
-#define ATMIOC_MPOA 0xd8 /* MPOA, globally unique */
-#define ATMIOC_CLIP 0xe0 /* Classical IP over ATM control, globally u. */
-#define ATMIOC_CLIP_END 0xef
-#define ATMIOC_SPECIAL 0xf0 /* Special-purpose controls, globally unique */
-#define ATMIOC_SPECIAL_END 0xff
-
-#endif
diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h
deleted file mode 100644
index 302791e..0000000
--- a/include/linux/atmlec.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * ATM Lan Emulation Daemon driver interface
- *
- * Marko Kiiskila <mkiiskila@yahoo.com>
- */
-
-#ifndef _ATMLEC_H_
-#define _ATMLEC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/if_ether.h>
-#include <linux/types.h>
-
-/* ATM lec daemon control socket */
-#define ATMLEC_CTRL _IO('a', ATMIOC_LANE)
-#define ATMLEC_DATA _IO('a', ATMIOC_LANE+1)
-#define ATMLEC_MCAST _IO('a', ATMIOC_LANE+2)
-
-/* Maximum number of LEC interfaces (tweakable) */
-#define MAX_LEC_ITF 48
-
-typedef enum {
- l_set_mac_addr,
- l_del_mac_addr,
- l_svc_setup,
- l_addr_delete,
- l_topology_change,
- l_flush_complete,
- l_arp_update,
- l_narp_req, /* LANE2 mandates the use of this */
- l_config,
- l_flush_tran_id,
- l_set_lecid,
- l_arp_xmt,
- l_rdesc_arp_xmt,
- l_associate_req,
- l_should_bridge /* should we bridge this MAC? */
-} atmlec_msg_type;
-
-#define ATMLEC_MSG_TYPE_MAX l_should_bridge
-
-struct atmlec_config_msg {
- unsigned int maximum_unknown_frame_count;
- unsigned int max_unknown_frame_time;
- unsigned short max_retry_count;
- unsigned int aging_time;
- unsigned int forward_delay_time;
- unsigned int arp_response_time;
- unsigned int flush_timeout;
- unsigned int path_switching_delay;
- unsigned int lane_version; /* LANE2: 1 for LANEv1, 2 for LANEv2 */
- int mtu;
- int is_proxy;
-};
-
-struct atmlec_msg {
- atmlec_msg_type type;
- int sizeoftlvs; /* LANE2: if != 0, tlvs follow */
- union {
- struct {
- unsigned char mac_addr[ETH_ALEN];
- unsigned char atm_addr[ATM_ESA_LEN];
- unsigned int flag; /*
- * Topology_change flag,
- * remoteflag, permanent flag,
- * lecid, transaction id
- */
- unsigned int targetless_le_arp; /* LANE2 */
- unsigned int no_source_le_narp; /* LANE2 */
- } normal;
- struct atmlec_config_msg config;
- struct {
- __u16 lec_id; /* requestor lec_id */
- __u32 tran_id; /* transaction id */
- unsigned char mac_addr[ETH_ALEN]; /* dst mac addr */
- unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */
- } proxy; /*
- * For mapping LE_ARP requests to responses. Filled by
- * zeppelin, returned by kernel. Used only when proxying
- */
- } content;
-} __ATM_API_ALIGN;
-
-struct atmlec_ioc {
- int dev_num;
- unsigned char atm_addr[ATM_ESA_LEN];
- unsigned char receive; /* 1= receive vcc, 0 = send vcc */
-};
-#endif /* _ATMLEC_H_ */
diff --git a/include/linux/atmmpc.h b/include/linux/atmmpc.h
deleted file mode 100644
index 2aba578..0000000
--- a/include/linux/atmmpc.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _ATMMPC_H_
-#define _ATMMPC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/types.h>
-
-#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
-#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
-
-#define MPC_SOCKET_INGRESS 1
-#define MPC_SOCKET_EGRESS 2
-
-struct atmmpc_ioc {
- int dev_num;
- __be32 ipaddr; /* the IP address of the shortcut */
- int type; /* ingress or egress */
-};
-
-typedef struct in_ctrl_info {
- __u8 Last_NHRP_CIE_code;
- __u8 Last_Q2931_cause_value;
- __u8 eg_MPC_ATM_addr[ATM_ESA_LEN];
- __be32 tag;
- __be32 in_dst_ip; /* IP address this ingress MPC sends packets to */
- __u16 holding_time;
- __u32 request_id;
-} in_ctrl_info;
-
-typedef struct eg_ctrl_info {
- __u8 DLL_header[256];
- __u8 DH_length;
- __be32 cache_id;
- __be32 tag;
- __be32 mps_ip;
- __be32 eg_dst_ip; /* IP address to which ingress MPC sends packets */
- __u8 in_MPC_data_ATM_addr[ATM_ESA_LEN];
- __u16 holding_time;
-} eg_ctrl_info;
-
-struct mpc_parameters {
- __u16 mpc_p1; /* Shortcut-Setup Frame Count */
- __u16 mpc_p2; /* Shortcut-Setup Frame Time */
- __u8 mpc_p3[8]; /* Flow-detection Protocols */
- __u16 mpc_p4; /* MPC Initial Retry Time */
- __u16 mpc_p5; /* MPC Retry Time Maximum */
- __u16 mpc_p6; /* Hold Down Time */
-} ;
-
-struct k_message {
- __u16 type;
- __be32 ip_mask;
- __u8 MPS_ctrl[ATM_ESA_LEN];
- union {
- in_ctrl_info in_info;
- eg_ctrl_info eg_info;
- struct mpc_parameters params;
- } content;
- struct atm_qos qos;
-} __ATM_API_ALIGN;
-
-struct llc_snap_hdr {
- /* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
- __u8 dsap; /* Destination Service Access Point (0xAA) */
- __u8 ssap; /* Source Service Access Point (0xAA) */
- __u8 ui; /* Unnumbered Information (0x03) */
- __u8 org[3]; /* Organizational identification (0x000000) */
- __u8 type[2]; /* Ether type (for IP) (0x0800) */
-};
-
-/* TLVs this MPC recognizes */
-#define TLV_MPOA_DEVICE_TYPE 0x00a03e2a
-
-/* MPOA device types in MPOA Device Type TLV */
-#define NON_MPOA 0
-#define MPS 1
-#define MPC 2
-#define MPS_AND_MPC 3
-
-
-/* MPC parameter defaults */
-
-#define MPC_P1 10 /* Shortcut-Setup Frame Count */
-#define MPC_P2 1 /* Shortcut-Setup Frame Time */
-#define MPC_P3 0 /* Flow-detection Protocols */
-#define MPC_P4 5 /* MPC Initial Retry Time */
-#define MPC_P5 40 /* MPC Retry Time Maximum */
-#define MPC_P6 160 /* Hold Down Time */
-#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
-
-/* MPC constants */
-
-#define MPC_C1 2 /* Retry Time Multiplier */
-#define MPC_C2 60 /* Initial Keep-Alive Lifetime */
-
-/* Message types - to MPOA daemon */
-
-#define SND_MPOA_RES_RQST 201
-#define SET_MPS_CTRL_ADDR 202
-#define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */
-#define STOP_KEEP_ALIVE_SM 204
-#define EGRESS_ENTRY_REMOVED 205
-#define SND_EGRESS_PURGE 206
-#define DIE 207 /* tell the daemon to exit() */
-#define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */
-#define OPEN_INGRESS_SVC 209
-
-/* Message types - from MPOA daemon */
-
-#define MPOA_TRIGGER_RCVD 101
-#define MPOA_RES_REPLY_RCVD 102
-#define INGRESS_PURGE_RCVD 103
-#define EGRESS_PURGE_RCVD 104
-#define MPS_DEATH 105
-#define CACHE_IMPOS_RCVD 106
-#define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */
-#define SET_MPS_MAC_ADDR 108
-#define CLEAN_UP_AND_EXIT 109
-#define SET_MPC_PARAMS 110 /* MPC configuration parameters */
-
-/* Message types - bidirectional */
-
-#define RELOAD 301 /* kill -HUP the daemon for reload */
-
-#endif /* _ATMMPC_H_ */
diff --git a/include/linux/atmppp.h b/include/linux/atmppp.h
deleted file mode 100644
index 300dcce..0000000
--- a/include/linux/atmppp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* atmppp.h - RFC2364 PPPoATM */
-
-/* Written 2000 by Mitchell Blank Jr */
-
-#ifndef _LINUX_ATMPPP_H
-#define _LINUX_ATMPPP_H
-
-#include <linux/atm.h>
-
-#define PPPOATM_ENCAPS_AUTODETECT (0)
-#define PPPOATM_ENCAPS_VC (1)
-#define PPPOATM_ENCAPS_LLC (2)
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_ppp {
- atm_backend_t backend_num; /* ATM_BACKEND_PPP */
- int encaps; /* PPPOATM_ENCAPS_* */
-};
-
-#endif /* _LINUX_ATMPPP_H */
diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h
deleted file mode 100644
index 799b104..0000000
--- a/include/linux/atmsap.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* atmsap.h - ATM Service Access Point addressing definitions */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef _LINUX_ATMSAP_H
-#define _LINUX_ATMSAP_H
-
-#include <linux/atmapi.h>
-
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-
-/*
- * Layer 2 protocol identifiers
- */
-
-/* BEGIN_L2 */
-#define ATM_L2_NONE 0 /* L2 not specified */
-#define ATM_L2_ISO1745 0x01 /* Basic mode ISO 1745 */
-#define ATM_L2_Q291 0x02 /* ITU-T Q.291 (Rec. I.441) */
-#define ATM_L2_X25_LL 0x06 /* ITU-T X.25, link layer */
-#define ATM_L2_X25_ML 0x07 /* ITU-T X.25, multilink */
-#define ATM_L2_LAPB 0x08 /* Extended LAPB, half-duplex (Rec. T.71) */
-#define ATM_L2_HDLC_ARM 0x09 /* HDLC ARM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_NRM 0x0a /* HDLC NRM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_ABM 0x0b /* HDLC ABM (ISO/IEC 4335) */
-#define ATM_L2_ISO8802 0x0c /* LAN LLC (ISO/IEC 8802/2) */
-#define ATM_L2_X75 0x0d /* ITU-T X.75, SLP */
-#define ATM_L2_Q922 0x0e /* ITU-T Q.922 */
-#define ATM_L2_USER 0x10 /* user-specified */
-#define ATM_L2_ISO7776 0x11 /* ISO 7776 DTE-DTE */
-/* END_L2 */
-
-
-/*
- * Layer 3 protocol identifiers
- */
-
-/* BEGIN_L3 */
-#define ATM_L3_NONE 0 /* L3 not specified */
-#define ATM_L3_X25 0x06 /* ITU-T X.25, packet layer */
-#define ATM_L3_ISO8208 0x07 /* ISO/IEC 8208 */
-#define ATM_L3_X223 0x08 /* ITU-T X.223 | ISO/IEC 8878 */
-#define ATM_L3_ISO8473 0x09 /* ITU-T X.233 | ISO/IEC 8473 */
-#define ATM_L3_T70 0x0a /* ITU-T T.70 minimum network layer */
-#define ATM_L3_TR9577 0x0b /* ISO/IEC TR 9577 */
-#define ATM_L3_H310 0x0c /* ITU-T Recommendation H.310 */
-#define ATM_L3_H321 0x0d /* ITU-T Recommendation H.321 */
-#define ATM_L3_USER 0x10 /* user-specified */
-/* END_L3 */
-
-
-/*
- * High layer identifiers
- */
-
-/* BEGIN_HL */
-#define ATM_HL_NONE 0 /* HL not specified */
-#define ATM_HL_ISO 0x01 /* ISO */
-#define ATM_HL_USER 0x02 /* user-specific */
-#define ATM_HL_HLP 0x03 /* high layer profile - UNI 3.0 only */
-#define ATM_HL_VENDOR 0x04 /* vendor-specific application identifier */
-/* END_HL */
-
-
-/*
- * ITU-T coded mode of operation
- */
-
-/* BEGIN_IMD */
-#define ATM_IMD_NONE 0 /* mode not specified */
-#define ATM_IMD_NORMAL 1 /* normal mode of operation */
-#define ATM_IMD_EXTENDED 2 /* extended mode of operation */
-/* END_IMD */
-
-/*
- * H.310 code points
- */
-
-#define ATM_TT_NONE 0 /* terminal type not specified */
-#define ATM_TT_RX 1 /* receive only */
-#define ATM_TT_TX 2 /* send only */
-#define ATM_TT_RXTX 3 /* receive and send */
-
-#define ATM_MC_NONE 0 /* no multiplexing */
-#define ATM_MC_TS 1 /* transport stream (TS) */
-#define ATM_MC_TS_FEC 2 /* transport stream with forward error corr. */
-#define ATM_MC_PS 3 /* program stream (PS) */
-#define ATM_MC_PS_FEC 4 /* program stream with forward error corr. */
-#define ATM_MC_H221 5 /* ITU-T Rec. H.221 */
-
-/*
- * SAP structures
- */
-
-#define ATM_MAX_HLI 8 /* maximum high-layer information length */
-
-
-struct atm_blli {
- unsigned char l2_proto; /* layer 2 protocol */
- union {
- struct {
- unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */
- /* absent */
- unsigned char window; /* window size (k), 1-127 (0 to omit) */
- } itu; /* ITU-T encoding */
- unsigned char user; /* user-specified l2 information */
- } l2;
- unsigned char l3_proto; /* layer 3 protocol */
- union {
- struct {
- unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */
- /* absent */
- unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
- /* omit) */
- unsigned char window;/* packet window size, 1-127 (0 to omit) */
- } itu; /* ITU-T encoding */
- unsigned char user; /* user specified l3 information */
- struct { /* if l3_proto = ATM_L3_H310 */
- unsigned char term_type; /* terminal type */
- unsigned char fw_mpx_cap; /* forward multiplexing capability */
- /* only if term_type != ATM_TT_NONE */
- unsigned char bw_mpx_cap; /* backward multiplexing capability */
- /* only if term_type != ATM_TT_NONE */
- } h310;
- struct { /* if l3_proto = ATM_L3_TR9577 */
- unsigned char ipi; /* initial protocol id */
- unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
- /* (only if ipi == NLPID_IEEE802_1_SNAP) */
- } tr9577;
- } l3;
-} __ATM_API_ALIGN;
-
-
-struct atm_bhli {
- unsigned char hl_type; /* high layer information type */
- unsigned char hl_length; /* length (only if hl_type == ATM_HL_USER || */
- /* hl_type == ATM_HL_ISO) */
- unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
-};
-
-
-#define ATM_MAX_BLLI 3 /* maximum number of BLLI elements */
-
-
-struct atm_sap {
- struct atm_bhli bhli; /* local SAP, high-layer information */
- struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
- /* local SAP, low-layer info */
-};
-
-
-static __inline__ int blli_in_use(struct atm_blli blli)
-{
- return blli.l2_proto || blli.l3_proto;
-}
-
-#endif
diff --git a/include/linux/atmsvc.h b/include/linux/atmsvc.h
deleted file mode 100644
index aa71583..0000000
--- a/include/linux/atmsvc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* atmsvc.h - ATM signaling kernel-demon interface definitions */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef _LINUX_ATMSVC_H
-#define _LINUX_ATMSVC_H
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
- /* become ATM signaling demon control socket */
-
-enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
- as_listen, as_okay, as_error, as_indicate, as_close,
- as_itf_notify, as_modify, as_identify, as_terminate,
- as_addparty, as_dropparty };
-
-struct atmsvc_msg {
- enum atmsvc_msg_type type;
- atm_kptr_t vcc;
- atm_kptr_t listen_vcc; /* indicate */
- int reply; /* for okay and close: */
- /* < 0: error before active */
- /* (sigd has discarded ctx) */
- /* ==0: success */
- /* > 0: error when active (still */
- /* need to close) */
- struct sockaddr_atmpvc pvc; /* indicate, okay (connect) */
- struct sockaddr_atmsvc local; /* local SVC address */
- struct atm_qos qos; /* QOS parameters */
- struct atm_sap sap; /* SAP */
- unsigned int session; /* for p2pm */
- struct sockaddr_atmsvc svc; /* SVC address */
-} __ATM_API_ALIGN;
-
-/*
- * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
- */
-
-/*
- * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
- * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
- * tries to do better than that, but only if there's no routing decision (i.e.
- * if signaling only uses one ATM interface).
- */
-
-#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
- (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
- (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
-
-#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b889fa6..bce729a 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -20,389 +20,11 @@
* Written by Rickard E. (Rik) Faith <faith@redhat.com>
*
*/
-
#ifndef _LINUX_AUDIT_H_
#define _LINUX_AUDIT_H_
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space
- * communication.
- */
-#define AUDIT_GET 1000 /* Get status */
-#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */
-#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */
-#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */
-#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */
-#define AUDIT_USER 1005 /* Message from userspace -- deprecated */
-#define AUDIT_LOGIN 1006 /* Define the login id and information */
-#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */
-#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */
-#define AUDIT_TRIM 1014 /* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */
-#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */
-#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC 1107 /* We filter this differently */
-#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG 1199
-#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */
-#define AUDIT_LAST_USER_MSG2 2999
-
-#define AUDIT_DAEMON_START 1200 /* Daemon startup record */
-#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */
-
-#define AUDIT_SYSCALL 1300 /* Syscall event */
-/* #define AUDIT_FS_WATCH 1301 * Deprecated */
-#define AUDIT_PATH 1302 /* Filename path information */
-#define AUDIT_IPC 1303 /* IPC record */
-#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */
-#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */
-#define AUDIT_CWD 1307 /* Current working directory */
-#define AUDIT_EXECVE 1309 /* execve arguments */
-#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */
-#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */
-#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID 1318 /* ptrace target */
-#define AUDIT_TTY 1319 /* Input on an administrative TTY */
-#define AUDIT_EOE 1320 /* End of multi-record event */
-#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
-#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
-#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
-
-#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */
-#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */
-#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */
-#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */
-#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG 1700
-#define AUDIT_LAST_KERN_ANOM_MSG 1799
-#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */
-#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */
-#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */
-
-#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS 6
-
-#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER 0 /* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1 /* Build context if rule matches */
-#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS 64
-#define AUDIT_MAX_KEY_LEN 256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input. It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS 0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID 1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID 2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9
-
-#define AUDIT_COMPARE_UID_TO_AUID 10
-#define AUDIT_COMPARE_UID_TO_EUID 11
-#define AUDIT_COMPARE_UID_TO_FSUID 12
-#define AUDIT_COMPARE_UID_TO_SUID 13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID 14
-#define AUDIT_COMPARE_AUID_TO_SUID 15
-#define AUDIT_COMPARE_AUID_TO_EUID 16
-
-#define AUDIT_COMPARE_EUID_TO_SUID 17
-#define AUDIT_COMPARE_EUID_TO_FSUID 18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID 19
-
-#define AUDIT_COMPARE_GID_TO_EGID 20
-#define AUDIT_COMPARE_GID_TO_FSGID 21
-#define AUDIT_COMPARE_GID_TO_SGID 22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID 23
-#define AUDIT_COMPARE_EGID_TO_SGID 24
-#define AUDIT_COMPARE_SGID_TO_FSGID 25
-
-#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
- /* These are useful when checking the
- * task structure at task creation time
- * (AUDIT_PER_TASK). */
-#define AUDIT_PID 0
-#define AUDIT_UID 1
-#define AUDIT_EUID 2
-#define AUDIT_SUID 3
-#define AUDIT_FSUID 4
-#define AUDIT_GID 5
-#define AUDIT_EGID 6
-#define AUDIT_SGID 7
-#define AUDIT_FSGID 8
-#define AUDIT_LOGINUID 9
-#define AUDIT_PERS 10
-#define AUDIT_ARCH 11
-#define AUDIT_MSGTYPE 12
-#define AUDIT_SUBJ_USER 13 /* security label user */
-#define AUDIT_SUBJ_ROLE 14 /* security label role */
-#define AUDIT_SUBJ_TYPE 15 /* security label type */
-#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */
-#define AUDIT_SUBJ_CLR 17 /* security label clearance label */
-#define AUDIT_PPID 18
-#define AUDIT_OBJ_USER 19
-#define AUDIT_OBJ_ROLE 20
-#define AUDIT_OBJ_TYPE 21
-#define AUDIT_OBJ_LEV_LOW 22
-#define AUDIT_OBJ_LEV_HIGH 23
-
- /* These are ONLY useful when checking
- * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR 100
-#define AUDIT_DEVMINOR 101
-#define AUDIT_INODE 102
-#define AUDIT_EXIT 103
-#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */
-#define AUDIT_WATCH 105
-#define AUDIT_PERM 106
-#define AUDIT_DIR 107
-#define AUDIT_FILETYPE 108
-#define AUDIT_OBJ_UID 109
-#define AUDIT_OBJ_GID 110
-#define AUDIT_FIELD_COMPARE 111
-
-#define AUDIT_ARG0 200
-#define AUDIT_ARG1 (AUDIT_ARG0+1)
-#define AUDIT_ARG2 (AUDIT_ARG0+2)
-#define AUDIT_ARG3 (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY 210
-
-#define AUDIT_NEGATE 0x80000000
-
-/* These are the supported operators.
- * 4 2 1 8
- * = > < ?
- * ----------
- * 0 0 0 0 00 nonsense
- * 0 0 0 1 08 & bit mask
- * 0 0 1 0 10 <
- * 0 1 0 0 20 >
- * 0 1 1 0 30 !=
- * 1 0 0 0 40 =
- * 1 0 0 1 48 &= bit test
- * 1 0 1 0 50 <=
- * 1 1 0 0 60 >=
- * 1 1 1 1 78 all operators
- */
-#define AUDIT_BIT_MASK 0x08000000
-#define AUDIT_LESS_THAN 0x10000000
-#define AUDIT_GREATER_THAN 0x20000000
-#define AUDIT_NOT_EQUAL 0x30000000
-#define AUDIT_EQUAL 0x40000000
-#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
- Audit_equal,
- Audit_not_equal,
- Audit_bitmask,
- Audit_bittest,
- Audit_lt,
- Audit_gt,
- Audit_le,
- Audit_ge,
- Audit_bad
-};
-
-/* Status symbols */
- /* Mask values */
-#define AUDIT_STATUS_ENABLED 0x0001
-#define AUDIT_STATUS_FAILURE 0x0002
-#define AUDIT_STATUS_PID 0x0004
-#define AUDIT_STATUS_RATE_LIMIT 0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010
- /* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT 0
-#define AUDIT_FAIL_PRINTK 1
-#define AUDIT_FAIL_PANIC 2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE 0x40000000
-#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB (EM_ARM)
-#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV (EM_FRV)
-#define AUDIT_ARCH_H8300 (EM_H8_300)
-#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R (EM_M32R)
-#define AUDIT_ARCH_M68K (EM_68K)
-#define AUDIT_ARCH_MIPS (EM_MIPS)
-#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_OPENRISC (EM_OPENRISC)
-#define AUDIT_ARCH_PARISC (EM_PARISC)
-#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC (EM_PPC)
-#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390 (EM_S390)
-#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH (EM_SH)
-#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC (EM_SPARC)
-#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC 1
-#define AUDIT_PERM_WRITE 2
-#define AUDIT_PERM_READ 4
-#define AUDIT_PERM_ATTR 8
-
-struct audit_status {
- __u32 mask; /* Bit mask for valid entries */
- __u32 enabled; /* 1 = enabled, 0 = disabled */
- __u32 failure; /* Failure-to-log action */
- __u32 pid; /* pid of auditd process */
- __u32 rate_limit; /* messages rate limit (per second) */
- __u32 backlog_limit; /* waiting messages limit */
- __u32 lost; /* messages lost */
- __u32 backlog; /* messages waiting in queue */
-};
-
-struct audit_tty_status {
- __u32 enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
- __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
- __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
- __u32 field_count;
- __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
- __u32 fields[AUDIT_MAX_FIELDS];
- __u32 values[AUDIT_MAX_FIELDS];
- __u32 fieldflags[AUDIT_MAX_FIELDS];
- __u32 buflen; /* total length of string fields */
- char buf[0]; /* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace. It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
- __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
- __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
- __u32 field_count;
- __u32 mask[AUDIT_BITMASK_SIZE];
- __u32 fields[AUDIT_MAX_FIELDS];
- __u32 values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
#include <linux/sched.h>
+#include <uapi/linux/audit.h>
struct audit_sig_info {
uid_t uid;
@@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf)
}
#endif
-#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15..fcd704d 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -10,77 +10,11 @@
*
* ----------------------------------------------------------------------- */
-
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
#include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION 3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this. This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode 32 bit 64 bit
- * -------------------------
- * int 32 bit 32 bit
- * long 32 bit 64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing 0 /* Missing entry (mount request) */
-#define autofs_ptype_expire 1 /* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
- int proto_version; /* Protocol version */
- int type; /* Type of packet */
-};
-
-struct autofs_packet_missing {
- struct autofs_packet_hdr hdr;
- autofs_wqt_t wait_queue_token;
- int len;
- char name[NAME_MAX+1];
-};
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
- struct autofs_packet_hdr hdr;
- int len;
- char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
-
+#include <uapi/linux/auto_fs.h>
#endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
deleted file mode 100644
index e02982f..0000000
--- a/include/linux/auto_fs4.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/* -*- c -*-
- * linux/include/linux/auto_fs4.h
- *
- * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- */
-
-#ifndef _LINUX_AUTO_FS4_H
-#define _LINUX_AUTO_FS4_H
-
-/* Include common v3 definitions */
-#include <linux/types.h>
-#include <linux/auto_fs.h>
-
-/* autofs v4 definitions */
-#undef AUTOFS_PROTO_VERSION
-#undef AUTOFS_MIN_PROTO_VERSION
-#undef AUTOFS_MAX_PROTO_VERSION
-
-#define AUTOFS_PROTO_VERSION 5
-#define AUTOFS_MIN_PROTO_VERSION 3
-#define AUTOFS_MAX_PROTO_VERSION 5
-
-#define AUTOFS_PROTO_SUBVERSION 2
-
-/* Mask for expire behaviour */
-#define AUTOFS_EXP_IMMEDIATE 1
-#define AUTOFS_EXP_LEAVES 2
-
-#define AUTOFS_TYPE_ANY 0U
-#define AUTOFS_TYPE_INDIRECT 1U
-#define AUTOFS_TYPE_DIRECT 2U
-#define AUTOFS_TYPE_OFFSET 4U
-
-static inline void set_autofs_type_indirect(unsigned int *type)
-{
- *type = AUTOFS_TYPE_INDIRECT;
- return;
-}
-
-static inline unsigned int autofs_type_indirect(unsigned int type)
-{
- return (type == AUTOFS_TYPE_INDIRECT);
-}
-
-static inline void set_autofs_type_direct(unsigned int *type)
-{
- *type = AUTOFS_TYPE_DIRECT;
- return;
-}
-
-static inline unsigned int autofs_type_direct(unsigned int type)
-{
- return (type == AUTOFS_TYPE_DIRECT);
-}
-
-static inline void set_autofs_type_offset(unsigned int *type)
-{
- *type = AUTOFS_TYPE_OFFSET;
- return;
-}
-
-static inline unsigned int autofs_type_offset(unsigned int type)
-{
- return (type == AUTOFS_TYPE_OFFSET);
-}
-
-static inline unsigned int autofs_type_trigger(unsigned int type)
-{
- return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET);
-}
-
-/*
- * This isn't really a type as we use it to say "no type set" to
- * indicate we want to search for "any" mount in the
- * autofs_dev_ioctl_ismountpoint() device ioctl function.
- */
-static inline void set_autofs_type_any(unsigned int *type)
-{
- *type = AUTOFS_TYPE_ANY;
- return;
-}
-
-static inline unsigned int autofs_type_any(unsigned int type)
-{
- return (type == AUTOFS_TYPE_ANY);
-}
-
-/* Daemon notification packet types */
-enum autofs_notify {
- NFY_NONE,
- NFY_MOUNT,
- NFY_EXPIRE
-};
-
-/* Kernel protocol version 4 packet types */
-
-/* Expire entry (umount request) */
-#define autofs_ptype_expire_multi 2
-
-/* Kernel protocol version 5 packet types */
-
-/* Indirect mount missing and expire requests. */
-#define autofs_ptype_missing_indirect 3
-#define autofs_ptype_expire_indirect 4
-
-/* Direct mount missing and expire requests */
-#define autofs_ptype_missing_direct 5
-#define autofs_ptype_expire_direct 6
-
-/* v4 multi expire (via pipe) */
-struct autofs_packet_expire_multi {
- struct autofs_packet_hdr hdr;
- autofs_wqt_t wait_queue_token;
- int len;
- char name[NAME_MAX+1];
-};
-
-union autofs_packet_union {
- struct autofs_packet_hdr hdr;
- struct autofs_packet_missing missing;
- struct autofs_packet_expire expire;
- struct autofs_packet_expire_multi expire_multi;
-};
-
-/* autofs v5 common packet struct */
-struct autofs_v5_packet {
- struct autofs_packet_hdr hdr;
- autofs_wqt_t wait_queue_token;
- __u32 dev;
- __u64 ino;
- __u32 uid;
- __u32 gid;
- __u32 pid;
- __u32 tgid;
- __u32 len;
- char name[NAME_MAX+1];
-};
-
-typedef struct autofs_v5_packet autofs_packet_missing_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_expire_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_missing_direct_t;
-typedef struct autofs_v5_packet autofs_packet_expire_direct_t;
-
-union autofs_v5_packet_union {
- struct autofs_packet_hdr hdr;
- struct autofs_v5_packet v5_packet;
- autofs_packet_missing_indirect_t missing_indirect;
- autofs_packet_expire_indirect_t expire_indirect;
- autofs_packet_missing_direct_t missing_direct;
- autofs_packet_expire_direct_t expire_direct;
-};
-
-#define AUTOFS_IOC_EXPIRE_MULTI _IOW(0x93,0x66,int)
-#define AUTOFS_IOC_EXPIRE_INDIRECT AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_EXPIRE_DIRECT AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_PROTOSUBVER _IOR(0x93,0x67,int)
-#define AUTOFS_IOC_ASKUMOUNT _IOR(0x93,0x70,int)
-
-
-#endif /* _LINUX_AUTO_FS4_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index f3b5d4e..669fef5 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -1,39 +1,8 @@
#ifndef _LINUX_AUXVEC_H
#define _LINUX_AUXVEC_H
-#include <asm/auxvec.h>
+#include <uapi/linux/auxvec.h>
-/* Symbolic values for the entries in the auxiliary table
- put on the initial stack */
-#define AT_NULL 0 /* end of vector */
-#define AT_IGNORE 1 /* entry should be ignored */
-#define AT_EXECFD 2 /* file descriptor of program */
-#define AT_PHDR 3 /* program headers for program */
-#define AT_PHENT 4 /* size of program header entry */
-#define AT_PHNUM 5 /* number of program headers */
-#define AT_PAGESZ 6 /* system page size */
-#define AT_BASE 7 /* base address of interpreter */
-#define AT_FLAGS 8 /* flags */
-#define AT_ENTRY 9 /* entry point of program */
-#define AT_NOTELF 10 /* program is not ELF */
-#define AT_UID 11 /* real uid */
-#define AT_EUID 12 /* effective uid */
-#define AT_GID 13 /* real gid */
-#define AT_EGID 14 /* effective gid */
-#define AT_PLATFORM 15 /* string identifying CPU for optimizations */
-#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17 /* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23 /* secure mode boolean */
-#define AT_BASE_PLATFORM 24 /* string identifying real platform, may
- * differ from AT_PLATFORM. */
-#define AT_RANDOM 25 /* address of 16 random bytes */
-
-#define AT_EXECFN 31 /* filename of program */
-
-#ifdef __KERNEL__
#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
/* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
#endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/ax25.h b/include/linux/ax25.h
deleted file mode 100644
index 74c89a4..0000000
--- a/include/linux/ax25.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * These are the public elements of the Linux kernel AX.25 code. A similar
- * file netrom.h exists for the NET/ROM protocol.
- */
-
-#ifndef AX25_KERNEL_H
-#define AX25_KERNEL_H
-
-#include <linux/socket.h>
-
-#define AX25_MTU 256
-#define AX25_MAX_DIGIS 8
-
-#define AX25_WINDOW 1
-#define AX25_T1 2
-#define AX25_N2 3
-#define AX25_T3 4
-#define AX25_T2 5
-#define AX25_BACKOFF 6
-#define AX25_EXTSEQ 7
-#define AX25_PIDINCL 8
-#define AX25_IDLE 9
-#define AX25_PACLEN 10
-#define AX25_IAMDIGI 12
-
-#define AX25_KILL 99
-
-#define SIOCAX25GETUID (SIOCPROTOPRIVATE+0)
-#define SIOCAX25ADDUID (SIOCPROTOPRIVATE+1)
-#define SIOCAX25DELUID (SIOCPROTOPRIVATE+2)
-#define SIOCAX25NOUID (SIOCPROTOPRIVATE+3)
-#define SIOCAX25OPTRT (SIOCPROTOPRIVATE+7)
-#define SIOCAX25CTLCON (SIOCPROTOPRIVATE+8)
-#define SIOCAX25GETINFOOLD (SIOCPROTOPRIVATE+9)
-#define SIOCAX25ADDFWD (SIOCPROTOPRIVATE+10)
-#define SIOCAX25DELFWD (SIOCPROTOPRIVATE+11)
-#define SIOCAX25DEVCTL (SIOCPROTOPRIVATE+12)
-#define SIOCAX25GETINFO (SIOCPROTOPRIVATE+13)
-
-#define AX25_SET_RT_IPMODE 2
-
-#define AX25_NOUID_DEFAULT 0
-#define AX25_NOUID_BLOCK 1
-
-typedef struct {
- char ax25_call[7]; /* 6 call + SSID (shifted ascii!) */
-} ax25_address;
-
-struct sockaddr_ax25 {
- __kernel_sa_family_t sax25_family;
- ax25_address sax25_call;
- int sax25_ndigis;
- /* Digipeater ax25_address sets follow */
-};
-
-#define sax25_uid sax25_ndigis
-
-struct full_sockaddr_ax25 {
- struct sockaddr_ax25 fsa_ax25;
- ax25_address fsa_digipeater[AX25_MAX_DIGIS];
-};
-
-struct ax25_routes_struct {
- ax25_address port_addr;
- ax25_address dest_addr;
- unsigned char digi_count;
- ax25_address digi_addr[AX25_MAX_DIGIS];
-};
-
-struct ax25_route_opt_struct {
- ax25_address port_addr;
- ax25_address dest_addr;
- int cmd;
- int arg;
-};
-
-struct ax25_ctl_struct {
- ax25_address port_addr;
- ax25_address source_addr;
- ax25_address dest_addr;
- unsigned int cmd;
- unsigned long arg;
- unsigned char digi_count;
- ax25_address digi_addr[AX25_MAX_DIGIS];
-};
-
-/* this will go away. Please do not export to user land */
-struct ax25_info_struct_deprecated {
- unsigned int n2, n2count;
- unsigned int t1, t1timer;
- unsigned int t2, t2timer;
- unsigned int t3, t3timer;
- unsigned int idle, idletimer;
- unsigned int state;
- unsigned int rcv_q, snd_q;
-};
-
-struct ax25_info_struct {
- unsigned int n2, n2count;
- unsigned int t1, t1timer;
- unsigned int t2, t2timer;
- unsigned int t3, t3timer;
- unsigned int idle, idletimer;
- unsigned int state;
- unsigned int rcv_q, snd_q;
- unsigned int vs, vr, va, vs_max;
- unsigned int paclen;
- unsigned int window;
-};
-
-struct ax25_fwd_struct {
- ax25_address port_from;
- ax25_address port_to;
-};
-
-#endif
diff --git a/include/linux/b1lli.h b/include/linux/b1lli.h
deleted file mode 100644
index 713f712..0000000
--- a/include/linux/b1lli.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * ISDN lowlevel-module for AVM B1-card.
- *
- * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _B1LLI_H_
-#define _B1LLI_H_
-/*
- * struct for loading t4 file
- */
-typedef struct avmb1_t4file {
- int len;
- unsigned char *data;
-} avmb1_t4file;
-
-typedef struct avmb1_loaddef {
- int contr;
- avmb1_t4file t4file;
-} avmb1_loaddef;
-
-typedef struct avmb1_loadandconfigdef {
- int contr;
- avmb1_t4file t4file;
- avmb1_t4file t4config;
-} avmb1_loadandconfigdef;
-
-typedef struct avmb1_resetdef {
- int contr;
-} avmb1_resetdef;
-
-typedef struct avmb1_getdef {
- int contr;
- int cardtype;
- int cardstate;
-} avmb1_getdef;
-
-/*
- * struct for adding new cards
- */
-typedef struct avmb1_carddef {
- int port;
- int irq;
-} avmb1_carddef;
-
-#define AVM_CARDTYPE_B1 0
-#define AVM_CARDTYPE_T1 1
-#define AVM_CARDTYPE_M1 2
-#define AVM_CARDTYPE_M2 3
-
-typedef struct avmb1_extcarddef {
- int port;
- int irq;
- int cardtype;
- int cardnr; /* for HEMA/T1 */
-} avmb1_extcarddef;
-
-#define AVMB1_LOAD 0 /* load image to card */
-#define AVMB1_ADDCARD 1 /* add a new card - OBSOLETE */
-#define AVMB1_RESETCARD 2 /* reset a card */
-#define AVMB1_LOAD_AND_CONFIG 3 /* load image and config to card */
-#define AVMB1_ADDCARD_WITH_TYPE 4 /* add a new card, with cardtype */
-#define AVMB1_GET_CARDINFO 5 /* get cardtype */
-#define AVMB1_REMOVECARD 6 /* remove a card - OBSOLETE */
-
-#define AVMB1_REGISTERCARD_IS_OBSOLETE
-
-#endif /* _B1LLI_H_ */
diff --git a/include/linux/baycom.h b/include/linux/baycom.h
deleted file mode 100644
index 81249e0..0000000
--- a/include/linux/baycom.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
- * and the parallel 9600 baud modem
- * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
- */
-
-#ifndef _BAYCOM_H
-#define _BAYCOM_H
-
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct baycom_debug_data {
- unsigned long debug1;
- unsigned long debug2;
- long debug3;
-};
-
-struct baycom_ioctl {
- int cmd;
- union {
- struct baycom_debug_data dbg;
- } data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values change for baycom
- */
-#define BAYCOMCTL_GETDEBUG 0x92
-
-/* -------------------------------------------------------------------- */
-
-#endif /* _BAYCOM_H */
-
-/* --------------------------------------------------------------------- */
diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h
deleted file mode 100644
index 1c0b355..0000000
--- a/include/linux/bfs_fs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/linux/bfs_fs.h - BFS data structures on disk.
- * Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
- */
-
-#ifndef _LINUX_BFS_FS_H
-#define _LINUX_BFS_FS_H
-
-#include <linux/types.h>
-
-#define BFS_BSIZE_BITS 9
-#define BFS_BSIZE (1<<BFS_BSIZE_BITS)
-
-#define BFS_MAGIC 0x1BADFACE
-#define BFS_ROOT_INO 2
-#define BFS_INODES_PER_BLOCK 8
-
-/* SVR4 vnode type values (bfs_inode->i_vtype) */
-#define BFS_VDIR 2L
-#define BFS_VREG 1L
-
-/* BFS inode layout on disk */
-struct bfs_inode {
- __le16 i_ino;
- __u16 i_unused;
- __le32 i_sblock;
- __le32 i_eblock;
- __le32 i_eoffset;
- __le32 i_vtype;
- __le32 i_mode;
- __le32 i_uid;
- __le32 i_gid;
- __le32 i_nlink;
- __le32 i_atime;
- __le32 i_mtime;
- __le32 i_ctime;
- __u32 i_padding[4];
-};
-
-#define BFS_NAMELEN 14
-#define BFS_DIRENT_SIZE 16
-#define BFS_DIRS_PER_BLOCK 32
-
-struct bfs_dirent {
- __le16 ino;
- char name[BFS_NAMELEN];
-};
-
-/* BFS superblock layout on disk */
-struct bfs_super_block {
- __le32 s_magic;
- __le32 s_start;
- __le32 s_end;
- __le32 s_from;
- __le32 s_to;
- __s32 s_bfrom;
- __s32 s_bto;
- char s_fsname[6];
- char s_volume[6];
- __u32 s_padding[118];
-};
-
-
-#define BFS_OFF2INO(offset) \
- ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
-
-#define BFS_INO2OFF(ino) \
- ((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
-#define BFS_NZFILESIZE(ip) \
- ((le32_to_cpu((ip)->i_eoffset) + 1) - le32_to_cpu((ip)->i_sblock) * BFS_BSIZE)
-
-#define BFS_FILESIZE(ip) \
- ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
-
-#define BFS_FILEBLOCKS(ip) \
- ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) - le32_to_cpu((ip)->i_sblock))
-#define BFS_UNCLEAN(bfs_sb, sb) \
- ((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY))
-
-
-#endif /* _LINUX_BFS_FS_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 26531f3..cfcc6bf 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -1,26 +1,10 @@
#ifndef _LINUX_BINFMTS_H
#define _LINUX_BINFMTS_H
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call. MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/unistd.h>
#include <asm/exec.h>
+#include <uapi/linux/binfmts.h>
#define CORENAME_MAX_SIZE 128
@@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *);
extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
#endif
-#endif /* __KERNEL__ */
#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h
deleted file mode 100644
index a851944..0000000
--- a/include/linux/blkpg.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _LINUX_BLKPG_H
-#define _LINUX_BLKPG_H
-
-/*
- * Partition table and disk geometry handling
- *
- * A single ioctl with lots of subfunctions:
- *
- * Device number stuff:
- * get_whole_disk() (given the device number of a partition,
- * find the device number of the encompassing disk)
- * get_all_partitions() (given the device number of a disk, return the
- * device numbers of all its known partitions)
- *
- * Partition stuff:
- * add_partition()
- * delete_partition()
- * test_partition_in_use() (also for test_disk_in_use)
- *
- * Geometry stuff:
- * get_geometry()
- * set_geometry()
- * get_bios_drivedata()
- *
- * For today, only the partition stuff - aeb, 990515
- */
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-
-#define BLKPG _IO(0x12,105)
-
-/* The argument structure */
-struct blkpg_ioctl_arg {
- int op;
- int flags;
- int datalen;
- void __user *data;
-};
-
-/* The subfunctions (for the op field) */
-#define BLKPG_ADD_PARTITION 1
-#define BLKPG_DEL_PARTITION 2
-#define BLKPG_RESIZE_PARTITION 3
-
-/* Sizes of name fields. Unused at present. */
-#define BLKPG_DEVNAMELTH 64
-#define BLKPG_VOLNAMELTH 64
-
-/* The data structure for ADD_PARTITION and DEL_PARTITION */
-struct blkpg_partition {
- long long start; /* starting offset in bytes */
- long long length; /* length in bytes */
- int pno; /* partition number */
- char devname[BLKPG_DEVNAMELTH]; /* partition name, like sda5 or c0d1p2,
- to be used in kernel messages */
- char volname[BLKPG_VOLNAMELTH]; /* volume label */
-};
-
-#endif /* _LINUX_BLKPG_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 4d1a074..7c2e030 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,150 +1,11 @@
#ifndef BLKTRACE_H
#define BLKTRACE_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
#include <linux/compat.h>
-#endif
-
-/*
- * Trace categories
- */
-enum blktrace_cat {
- BLK_TC_READ = 1 << 0, /* reads */
- BLK_TC_WRITE = 1 << 1, /* writes */
- BLK_TC_FLUSH = 1 << 2, /* flush */
- BLK_TC_SYNC = 1 << 3, /* sync IO */
- BLK_TC_SYNCIO = BLK_TC_SYNC,
- BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
- BLK_TC_REQUEUE = 1 << 5, /* requeueing */
- BLK_TC_ISSUE = 1 << 6, /* issue */
- BLK_TC_COMPLETE = 1 << 7, /* completions */
- BLK_TC_FS = 1 << 8, /* fs requests */
- BLK_TC_PC = 1 << 9, /* pc requests */
- BLK_TC_NOTIFY = 1 << 10, /* special message */
- BLK_TC_AHEAD = 1 << 11, /* readahead */
- BLK_TC_META = 1 << 12, /* metadata */
- BLK_TC_DISCARD = 1 << 13, /* discard requests */
- BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */
- BLK_TC_FUA = 1 << 15, /* fua requests */
-
- BLK_TC_END = 1 << 15, /* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT (16)
-#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
- __BLK_TA_QUEUE = 1, /* queued */
- __BLK_TA_BACKMERGE, /* back merged to existing rq */
- __BLK_TA_FRONTMERGE, /* front merge to existing rq */
- __BLK_TA_GETRQ, /* allocated new request */
- __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */
- __BLK_TA_REQUEUE, /* request requeued */
- __BLK_TA_ISSUE, /* sent to driver */
- __BLK_TA_COMPLETE, /* completed by driver */
- __BLK_TA_PLUG, /* queue was plugged */
- __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */
- __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */
- __BLK_TA_INSERT, /* insert request */
- __BLK_TA_SPLIT, /* bio was split */
- __BLK_TA_BOUNCE, /* bio was bounced */
- __BLK_TA_REMAP, /* bio was remapped */
- __BLK_TA_ABORT, /* request aborted */
- __BLK_TA_DRV_DATA, /* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
- __BLK_TN_PROCESS = 0, /* establish pid/name mapping */
- __BLK_TN_TIMESTAMP, /* include system clock */
- __BLK_TN_MESSAGE, /* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT (__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC 0x65617400
-#define BLK_IO_TRACE_VERSION 0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
- __u32 magic; /* MAGIC << 8 | version */
- __u32 sequence; /* event number */
- __u64 time; /* in microseconds */
- __u64 sector; /* disk offset */
- __u32 bytes; /* transfer length */
- __u32 action; /* what happened */
- __u32 pid; /* who did it */
- __u32 device; /* device number */
- __u32 cpu; /* on what cpu did it happen */
- __u16 error; /* completion error */
- __u16 pdu_len; /* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
- __be32 device_from;
- __be32 device_to;
- __be64 sector_from;
-};
-
-enum {
- Blktrace_setup = 1,
- Blktrace_running,
- Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE 32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
- char name[BLKTRACE_BDEV_SIZE]; /* output */
- __u16 act_mask; /* input */
- __u32 buf_size; /* input */
- __u32 buf_nr; /* input */
- __u64 start_lba;
- __u64 end_lba;
- __u32 pid;
-};
+#include <uapi/linux/blktrace_api.h>
-#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_IO_TRACE)
#include <linux/sysfs.h>
@@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/bpqether.h b/include/linux/bpqether.h
deleted file mode 100644
index a6c35e1..0000000
--- a/include/linux/bpqether.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __BPQETHER_H
-#define __BPQETHER_H
-
-/*
- * Defines for the BPQETHER pseudo device driver
- */
-
-#ifndef __LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#define SIOCSBPQETHOPT (SIOCDEVPRIVATE+0) /* reserved */
-#define SIOCSBPQETHADDR (SIOCDEVPRIVATE+1)
-
-struct bpq_ethaddr {
- unsigned char destination[ETH_ALEN];
- unsigned char accept[ETH_ALEN];
-};
-
-/*
- * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
- * currently not implemented, though. If someone wants to hook a radio
- * to his Ethernet card he may find this useful. ;-)
- */
-
-#define SIOCGBPQETHPARAM 0x5000 /* get Level 1 parameters */
-#define SIOCSBPQETHPARAM 0x5001 /* set */
-
-struct bpq_req {
- int cmd;
- int speed; /* unused */
- int clockmode; /* unused */
- int txdelay;
- unsigned char persist; /* unused */
- int slotime; /* unused */
- int squeldelay;
- int dmachan; /* unused */
- int irq; /* unused */
-};
-
-#endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
index ecb4730..7173f6e 100644
--- a/include/linux/bsg.h
+++ b/include/linux/bsg.h
@@ -1,67 +1,8 @@
#ifndef BSG_H
#define BSG_H
-#include <linux/types.h>
+#include <uapi/linux/bsg.h>
-#define BSG_PROTOCOL_SCSI 0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD 0
-#define BSG_SUB_PROTOCOL_SCSI_TMF 1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
- __s32 guard; /* [i] 'Q' to differentiate from v3 */
- __u32 protocol; /* [i] 0 -> SCSI , .... */
- __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task
- management function, .... */
-
- __u32 request_len; /* [i] in bytes */
- __u64 request; /* [i], [*i] {SCSI: cdb} */
- __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */
- __u32 request_attr; /* [i] {SCSI: task attribute} */
- __u32 request_priority; /* [i] {SCSI: task priority} */
- __u32 request_extra; /* [i] {spare, for padding} */
- __u32 max_response_len; /* [i] in bytes */
- __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */
-
- /* "dout_": data out (to device); "din_": data in (from device) */
- __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else
- dout_xfer points to array of iovec */
- __u32 dout_xfer_len; /* [i] bytes to be transferred to device */
- __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */
- __u32 din_xfer_len; /* [i] bytes to be transferred from device */
- __u64 dout_xferp; /* [i], [*i] */
- __u64 din_xferp; /* [i], [*o] */
-
- __u32 timeout; /* [i] units: millisecond */
- __u32 flags; /* [i] bit mask */
- __u64 usr_ptr; /* [i->o] unused internally */
- __u32 spare_in; /* [i] */
-
- __u32 driver_status; /* [o] 0 -> ok */
- __u32 transport_status; /* [o] 0 -> ok */
- __u32 device_status; /* [o] {SCSI: command completion status} */
- __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */
- __u32 info; /* [o] additional information */
- __u32 duration; /* [o] time to complete, in milliseconds */
- __u32 response_len; /* [o] bytes of response actually written */
- __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */
- __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */
- __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */
- __u32 spare_out; /* [o] */
-
- __u32 padding;
-};
-
-#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device {
@@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q)
}
#endif
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/can.h b/include/linux/can.h
deleted file mode 100644
index e52958d..0000000
--- a/include/linux/can.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/can.h
- *
- * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Urs Thuermann <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_H
-#define CAN_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* controller area network (CAN) kernel definitions */
-
-/* special address description flags for the CAN_ID */
-#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
-#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
-#define CAN_ERR_FLAG 0x20000000U /* error message frame */
-
-/* valid bits in CAN ID for frame formats */
-#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
-#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
-#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
-
-/*
- * Controller Area Network Identifier structure
- *
- * bit 0-28 : CAN identifier (11/29 bit)
- * bit 29 : error message frame flag (0 = data frame, 1 = error message)
- * bit 30 : remote transmission request flag (1 = rtr frame)
- * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
- */
-typedef __u32 canid_t;
-
-#define CAN_SFF_ID_BITS 11
-#define CAN_EFF_ID_BITS 29
-
-/*
- * Controller Area Network Error Message Frame Mask structure
- *
- * bit 0-28 : error class mask (see include/linux/can/error.h)
- * bit 29-31 : set to zero
- */
-typedef __u32 can_err_mask_t;
-
-/* CAN payload length and DLC definitions according to ISO 11898-1 */
-#define CAN_MAX_DLC 8
-#define CAN_MAX_DLEN 8
-
-/* CAN FD payload length and DLC definitions according to ISO 11898-7 */
-#define CANFD_MAX_DLC 15
-#define CANFD_MAX_DLEN 64
-
-/**
- * struct can_frame - basic CAN frame structure
- * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
- * @can_dlc: frame payload length in byte (0 .. 8) aka data length code
- * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1
- * mapping of the 'data length code' to the real payload length
- * @data: CAN frame payload (up to 8 byte)
- */
-struct can_frame {
- canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
- __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */
- __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8)));
-};
-
-/*
- * defined bits for canfd_frame.flags
- *
- * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to
- * be set in the CAN frame bitstream on the wire. The EDL bit switch turns
- * the CAN controllers bitstream processor into the CAN FD mode which creates
- * two new options within the CAN FD frame specification:
- *
- * Bit Rate Switch - to indicate a second bitrate is/was used for the payload
- * Error State Indicator - represents the error state of the transmitting node
- *
- * As the CANFD_ESI bit is internally generated by the transmitting CAN
- * controller only the CANFD_BRS bit is relevant for real CAN controllers when
- * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
- * sense for virtual CAN interfaces to test applications with echoed frames.
- */
-#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
-#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
-
-/**
- * struct canfd_frame - CAN flexible data rate frame structure
- * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
- * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN)
- * @flags: additional flags for CAN FD
- * @__res0: reserved / padding
- * @__res1: reserved / padding
- * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte)
- */
-struct canfd_frame {
- canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
- __u8 len; /* frame payload length in byte */
- __u8 flags; /* additional flags for CAN FD */
- __u8 __res0; /* reserved / padding */
- __u8 __res1; /* reserved / padding */
- __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
-};
-
-#define CAN_MTU (sizeof(struct can_frame))
-#define CANFD_MTU (sizeof(struct canfd_frame))
-
-/* particular protocols of the protocol family PF_CAN */
-#define CAN_RAW 1 /* RAW sockets */
-#define CAN_BCM 2 /* Broadcast Manager */
-#define CAN_TP16 3 /* VAG Transport Protocol v1.6 */
-#define CAN_TP20 4 /* VAG Transport Protocol v2.0 */
-#define CAN_MCNET 5 /* Bosch MCNet */
-#define CAN_ISOTP 6 /* ISO 15765-2 Transport Protocol */
-#define CAN_NPROTO 7
-
-#define SOL_CAN_BASE 100
-
-/**
- * struct sockaddr_can - the sockaddr structure for CAN sockets
- * @can_family: address family number AF_CAN.
- * @can_ifindex: CAN network interface index.
- * @can_addr: protocol specific address information
- */
-struct sockaddr_can {
- __kernel_sa_family_t can_family;
- int can_ifindex;
- union {
- /* transport protocol class address information (e.g. ISOTP) */
- struct { canid_t rx_id, tx_id; } tp;
-
- /* reserved for future CAN protocols address information */
- } can_addr;
-};
-
-/**
- * struct can_filter - CAN ID based filter in can_register().
- * @can_id: relevant bits of CAN ID which are not masked out.
- * @can_mask: CAN mask (see description)
- *
- * Description:
- * A filter matches, when
- *
- * <received_can_id> & mask == can_id & mask
- *
- * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
- * filter for error message frames (CAN_ERR_FLAG bit set in mask).
- */
-struct can_filter {
- canid_t can_id;
- canid_t can_mask;
-};
-
-#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
-
-#endif /* CAN_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
index d10b7ed..98503b7 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -9,82 +9,11 @@
*
* ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
*/
-
#ifndef _LINUX_CAPABILITY_H
#define _LINUX_CAPABILITY_H
-#include <linux/types.h>
-
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
- capabilities based on the version tag given by the kernel. The
- kernel might be somewhat backwards compatible, but don't bet on
- it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
- a set of three capability sets. The transposition of 3*the
- following structure to such a composite is better handled in a user
- library since the draft standard requires the use of malloc/free
- etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1 0x19980330
-#define _LINUX_CAPABILITY_U32S_1 1
-
-#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2 2
-
-#define _LINUX_CAPABILITY_VERSION_3 0x20080522
-#define _LINUX_CAPABILITY_U32S_3 2
-
-typedef struct __user_cap_header_struct {
- __u32 version;
- int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
- __u32 effective;
- __u32 permitted;
- __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK 0xFF000000
-#define VFS_CAP_REVISION_SHIFT 24
-#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE 0x000001
-
-#define VFS_CAP_REVISION_1 0x01000000
-#define VFS_CAP_U32_1 1
-#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2 0x02000000
-#define VFS_CAP_U32_2 2
-#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+#include <uapi/linux/capability.h>
-#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2
-#define VFS_CAP_U32 VFS_CAP_U32_2
-#define VFS_CAP_REVISION VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
- __le32 magic_etc; /* Little endian */
- struct {
- __le32 permitted; /* Little endian */
- __le32 inheritable; /* Little endian */
- } data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
-
-#else
#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
@@ -105,277 +34,6 @@ struct cpu_vfs_cap_data {
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
#define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t))
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
- overrides the restriction of changing file ownership and group
- ownership. */
-
-#define CAP_CHOWN 0
-
-/* Override all DAC access, including ACL execute access if
- [_POSIX_ACL] is defined. Excluding DAC access covered by
- CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE 1
-
-/* Overrides all DAC restrictions regarding read and search on files
- and directories, including ACL restrictions if [_POSIX_ACL] is
- defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH 2
-
-/* Overrides all restrictions about allowed operations on files, where
- file owner ID must be equal to the user ID, except where CAP_FSETID
- is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER 3
-
-/* Overrides the following restrictions that the effective user ID
- shall match the file owner ID when setting the S_ISUID and S_ISGID
- bits on that file; that the effective group ID (or one of the
- supplementary group IDs) shall match the file owner ID when setting
- the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
- cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID 4
-
-/* Overrides the restriction that the real or effective user ID of a
- process sending a signal must match the real or effective user ID
- of the process receiving the signal. */
-
-#define CAP_KILL 5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID 6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID 7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- * Transfer any capability in your permitted set to any pid,
- * remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- * Add any capability from current's capability bounding set
- * to the current process' inheritable set
- * Allow taking bits out of capability bounding set
- * Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP 8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE 9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST 11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
- sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN 12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW 13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
- with IPC) */
-
-#define CAP_IPC_LOCK 14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER 15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE 16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO 17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT 18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE 19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT 20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
- and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
- extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
- arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN 21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT 22
-
-/* Allow raising priority and setting priority on other (different
- UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
- processes and setting the scheduling algorithm used by another
- process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE 23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
- resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
- you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE 24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME 25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG 26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD 27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE 28
-
-#define CAP_AUDIT_WRITE 29
-
-#define CAP_AUDIT_CONTROL 30
-
-#define CAP_SETFCAP 31
-
-/* Override MAC access.
- The base kernel enforces no MAC policy.
- An LSM may enforce a MAC policy, and if it does and it chooses
- to implement capability based overrides of that policy, this is
- the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE 32
-
-/* Allow MAC configuration or state changes.
- The base kernel requires no MAC configuration.
- An LSM may enforce a MAC policy, and if it does and it chooses
- to implement capability based checks on modifications to that
- policy or the data required to maintain it, this is the
- capability it should use to do so. */
-
-#define CAP_MAC_ADMIN 33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG 34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM 35
-
-/* Allow preventing system suspends */
-
-#define CAP_BLOCK_SUSPEND 36
-
-#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
struct inode;
struct dentry;
@@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap);
/* audit system wants to get cap info from files as well */
extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
-#endif /* __KERNEL__ */
-
#endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/linux/capi.h
deleted file mode 100644
index 65100d6..0000000
--- a/include/linux/capi.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
- *
- * CAPI 2.0 Interface for Linux
- *
- * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __LINUX_CAPI_H__
-#define __LINUX_CAPI_H__
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#ifndef __KERNEL__
-#include <linux/kernelcapi.h>
-#endif
-
-/*
- * CAPI_REGISTER
- */
-
-typedef struct capi_register_params { /* CAPI_REGISTER */
- __u32 level3cnt; /* No. of simulatneous user data connections */
- __u32 datablkcnt; /* No. of buffered data messages */
- __u32 datablklen; /* Size of buffered data messages */
-} capi_register_params;
-
-#define CAPI_REGISTER _IOW('C',0x01,struct capi_register_params)
-
-/*
- * CAPI_GET_MANUFACTURER
- */
-
-#define CAPI_MANUFACTURER_LEN 64
-
-#define CAPI_GET_MANUFACTURER _IOWR('C',0x06,int) /* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
-
-/*
- * CAPI_GET_VERSION
- */
-
-typedef struct capi_version {
- __u32 majorversion;
- __u32 minorversion;
- __u32 majormanuversion;
- __u32 minormanuversion;
-} capi_version;
-
-#define CAPI_GET_VERSION _IOWR('C',0x07,struct capi_version)
-
-/*
- * CAPI_GET_SERIAL
- */
-
-#define CAPI_SERIAL_LEN 8
-#define CAPI_GET_SERIAL _IOWR('C',0x08,int) /* broken: wanted size 8 (CAPI_SERIAL_LEN) */
-
-/*
- * CAPI_GET_PROFILE
- */
-
-typedef struct capi_profile {
- __u16 ncontroller; /* number of installed controller */
- __u16 nbchannel; /* number of B-Channels */
- __u32 goptions; /* global options */
- __u32 support1; /* B1 protocols support */
- __u32 support2; /* B2 protocols support */
- __u32 support3; /* B3 protocols support */
- __u32 reserved[6]; /* reserved */
- __u32 manu[5]; /* manufacturer specific information */
-} capi_profile;
-
-#define CAPI_GET_PROFILE _IOWR('C',0x09,struct capi_profile)
-
-typedef struct capi_manufacturer_cmd {
- unsigned long cmd;
- void __user *data;
-} capi_manufacturer_cmd;
-
-/*
- * CAPI_MANUFACTURER_CMD
- */
-
-#define CAPI_MANUFACTURER_CMD _IOWR('C',0x20, struct capi_manufacturer_cmd)
-
-/*
- * CAPI_GET_ERRCODE
- * capi errcode is set, * if read, write, or ioctl returns EIO,
- * ioctl returns errcode directly, and in arg, if != 0
- */
-
-#define CAPI_GET_ERRCODE _IOR('C',0x21, __u16)
-
-/*
- * CAPI_INSTALLED
- */
-#define CAPI_INSTALLED _IOR('C',0x22, __u16)
-
-
-/*
- * member contr is input for
- * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
- * and CAPI_GET_PROFILE
- */
-typedef union capi_ioctl_struct {
- __u32 contr;
- capi_register_params rparams;
- __u8 manufacturer[CAPI_MANUFACTURER_LEN];
- capi_version version;
- __u8 serial[CAPI_SERIAL_LEN];
- capi_profile profile;
- capi_manufacturer_cmd cmd;
- __u16 errcode;
-} capi_ioctl_struct;
-
-/*
- * Middleware extension
- */
-
-#define CAPIFLAG_HIGHJACKING 0x0001
-
-#define CAPI_GET_FLAGS _IOR('C',0x23, unsigned)
-#define CAPI_SET_FLAGS _IOR('C',0x24, unsigned)
-#define CAPI_CLR_FLAGS _IOR('C',0x25, unsigned)
-
-#define CAPI_NCCI_OPENCOUNT _IOR('C',0x26, unsigned)
-
-#define CAPI_NCCI_GETUNIT _IOR('C',0x27, unsigned)
-
-#endif /* __LINUX_CAPI_H__ */
diff --git a/include/linux/cciss_defs.h b/include/linux/cciss_defs.h
deleted file mode 100644
index 316b670..0000000
--- a/include/linux/cciss_defs.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef CCISS_DEFS_H
-#define CCISS_DEFS_H
-
-#include <linux/types.h>
-
-/* general boundary definitions */
-#define SENSEINFOBYTES 32 /* note that this value may vary
- between host implementations */
-
-/* Command Status value */
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
-/* transfer direction */
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-/* task attribute */
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-/* cdb type */
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-/* Type defs used in the following structs */
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN 1024
-
-#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
-#define LEVEL3LUN 0
-
-#pragma pack(1)
-
-/* Command List Structure */
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; /* b00 */
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; /* b01 */
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; /* b10 */
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; /* 2 level target device addr */
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- } Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size; /* size of offending entry */
- BYTE offense_num; /* byte # of offense 0-base */
- DWORD offense_value;
- } Invalid_Cmd;
-} MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-
-#endif /* CCISS_DEFS_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index 986493f..84b6e2d 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -1,91 +1,8 @@
#ifndef CCISS_IOCTLH
#define CCISS_IOCTLH
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
+#include <uapi/linux/cciss_ioctl.h>
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
- unsigned char bus;
- unsigned char dev_fn;
- unsigned short domain;
- __u32 board_id;
-} cciss_pci_info_struct;
-
-typedef struct _cciss_coalint_struct
-{
- __u32 delay;
- __u32 count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 0x0001
-#define CISS_PARCSCIU3 0x0002
-#define CISS_FIBRE1G 0x0100
-#define CISS_FIBRE2G 0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
- LUNAddr_struct LUN_info;
- RequestBlock_struct Request;
- ErrorInfo_struct error_info;
- WORD buf_size; /* size in bytes of the buf */
- BYTE __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
- LUNAddr_struct LUN_info;
- RequestBlock_struct Request;
- ErrorInfo_struct error_info;
- DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
- DWORD buf_size; /* size in bytes of the buf */
- /* < malloc_size * MAXSGENTRIES */
- BYTE __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
- __u32 LunID;
- int num_opens; /* number of opens on the logical volume */
- int num_parts; /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */
-#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
/* 32 bit compatible ioctl structs */
@@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct {
#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index dfd7f18..8609d57 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -7,910 +7,12 @@
* 1997, 1998 Erik Andersen, andersee@debian.org
* 1998-2002 Jens Axboe, axboe@suse.de
*/
-
#ifndef _LINUX_CDROM_H
#define _LINUX_CDROM_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this
- * (and only this) include file. It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various
- * device drivers that actually talk to the drives. There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs
- * should use the O_NONBLOCK option when opening a CD-ROM device
- * for subsequent ioctl commands. This allows for neat system errors
- * like "No medium found" or "Wrong medium type" upon attempting to
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- * - drive = open("/dev/cdrom", O_RDONLY);
- * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- * Patches for many common CD programs (provided by David A. van Leeuwen)
- * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- *
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will
- * borrow the "Operation not supported" error from the network folks to
- * accomplish this. Maybe someday we will get a more targeted error code,
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands -- these should be supported by
- * all the various cdrom drivers. For the CD-ROM ioctls, we
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE 0x5301 /* Pause Audio Operation */
-#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index
- (struct cdrom_ti) */
-#define CDROMREADTOCHDR 0x5305 /* Read TOC header
- (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry
- (struct cdrom_tocentry) */
-#define CDROMSTOP 0x5307 /* Stop the cdrom drive */
-#define CDROMSTART 0x5308 /* Start the cdrom drive */
-#define CDROMEJECT 0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL 0x530a /* Control output volume
- (struct cdrom_volctrl) */
-#define CDROMSUBCHNL 0x530b /* Read subchannel data
- (struct cdrom_subchnl) */
-#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes)
- (struct cdrom_read) */
-#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes)
- (struct cdrom_read) */
-#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session
- address of multi session disks
- (struct cdrom_multisession) */
-#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code"
- if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated,
- but here anyway for compatibility */
-#define CDROMRESET 0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting
- (struct cdrom_volctrl) */
-#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes)
- (struct cdrom_read) */
-/*
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */
-#define CDROMSEEK 0x5316 /* seek msf address */
-
-/*
- * This ioctl is only used by the scsi-cd driver.
- It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */
-
-/*
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL 0x5318 /* read all 2646 bytes */
-
-/*
- * These ioctls are (now) only in ide-cd.c for controlling
- * drive spindown time. They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- * -Erik
- */
-#define CDROMGETSPINDOWN 0x531d
-#define CDROMSETSPINDOWN 0x531e
-
-/*
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */
-#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */
-#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */
-#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */
-#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */
-#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
- /* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT 0x5390 /* Read structure */
-#define DVD_WRITE_STRUCT 0x5391 /* Write structure */
-#define DVD_AUTH 0x5392 /* Authentication */
-
-#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */
-#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0
-{
- __u8 minute;
- __u8 second;
- __u8 frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr
-{
- struct cdrom_msf0 msf;
- int lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */
-struct cdrom_msf
-{
- __u8 cdmsf_min0; /* start minute */
- __u8 cdmsf_sec0; /* start second */
- __u8 cdmsf_frame0; /* start frame */
- __u8 cdmsf_min1; /* end minute */
- __u8 cdmsf_sec1; /* end second */
- __u8 cdmsf_frame1; /* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti
-{
- __u8 cdti_trk0; /* start track */
- __u8 cdti_ind0; /* start index */
- __u8 cdti_trk1; /* end track */
- __u8 cdti_ind1; /* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr
-{
- __u8 cdth_trk0; /* start track */
- __u8 cdth_trk1; /* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
- __u8 channel0;
- __u8 channel1;
- __u8 channel2;
- __u8 channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl
-{
- __u8 cdsc_format;
- __u8 cdsc_audiostatus;
- __u8 cdsc_adr: 4;
- __u8 cdsc_ctrl: 4;
- __u8 cdsc_trk;
- __u8 cdsc_ind;
- union cdrom_addr cdsc_absaddr;
- union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry
-{
- __u8 cdte_track;
- __u8 cdte_adr :4;
- __u8 cdte_ctrl :4;
- __u8 cdte_format;
- union cdrom_addr cdte_addr;
- __u8 cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read
-{
- int cdread_lba;
- char *cdread_bufaddr;
- int cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
- union cdrom_addr addr; /* frame address */
- __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
- int nframes; /* number of 2352-byte-frames to read at once */
- __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
- union cdrom_addr addr; /* frame address: start-of-last-session
- (not the new "frame 16"!). Only valid
- if the "xa_flag" is true. */
- __u8 xa_flag; /* 1: "is XA disk" */
- __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.
- * Very few audio discs actually have Universal Product Code information,
- * which should just be the Medium Catalog Number on the box. Also note
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */
-struct cdrom_mcn
-{
- __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk
-{
- unsigned from;
- unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE 12
-
-#define CGC_DATA_UNKNOWN 0
-#define CGC_DATA_WRITE 1
-#define CGC_DATA_READ 2
-#define CGC_DATA_NONE 3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
- unsigned char cmd[CDROM_PACKET_SIZE];
- unsigned char __user *buffer;
- unsigned int buflen;
- int stat;
- struct request_sense __user *sense;
- unsigned char data_direction;
- int quiet;
- int timeout;
- void __user *reserved[1]; /* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336,
- * 2340, or 2352 bytes long.
-
-* Sector types of the standard CD-ROM data formats:
- *
- * format sector type user data size (bytes)
- * -----------------------------------------------------------------------------
- * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW)
- * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE)
- * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0)
- * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE)
- * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes)
- *
- *
- * The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red): | audio_sample_bytes |
- * | 2352 |
- *
- * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC |
- * | 12 - 4 - 2048 - 4 - 8 - 276 |
- *
- * - data (yellow, mode2): | sync - head - data |
- * | 12 - 4 - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- * | 12 - 4 - 8 - 2048 - 4 - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- * | 12 - 4 - 8 - 2324 - 4 |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS 74 /* max. minutes per CD, not really a limit */
-#define CD_SECS 60 /* seconds per minute */
-#define CD_FRAMES 75 /* frames per second */
-#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define CDROM_DATA_TRACK 0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define CDROM_LEADOUT 0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */
-#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */
-#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */
-#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */
-#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */
-#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */
-#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */
-#define CDC_LOCK 0x4 /* disable manual eject */
-#define CDC_SELECT_SPEED 0x8 /* programmable speed */
-#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */
-#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */
-#define CDC_MCN 0x40 /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 0x80 /* media changed */
-#define CDC_PLAY_AUDIO 0x100 /* audio functions */
-#define CDC_RESET 0x200 /* hard reset device */
-#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */
-#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */
-#define CDC_CD_R 0x2000 /* drive is a CD-R */
-#define CDC_CD_RW 0x4000 /* drive is a CD-RW */
-#define CDC_DVD 0x8000 /* drive is a DVD */
-#define CDC_DVD_R 0x10000 /* drive can write DVD-R */
-#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */
-#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */
-#define CDC_MRW 0x80000 /* drive can read MRW */
-#define CDC_MRW_W 0x100000 /* drive can write MRW */
-#define CDC_RAM 0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO 0 /* if not implemented */
-#define CDS_NO_DISC 1
-#define CDS_TRAY_OPEN 2
-#define CDS_DRIVE_NOT_READY 3
-#define CDS_DISC_OK 4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO 100
-#define CDS_DATA_1 101
-#define CDS_DATA_2 102
-#define CDS_XA_2_1 103
-#define CDS_XA_2_2 104
-#define CDS_MIXED 105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */
-#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */
-#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */
-#define CDO_LOCK 0x8 /* lock tray on open files */
-#define CDO_CHECK_TYPE 0x10 /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE (INT_MAX-1)
-#define CDSL_CURRENT INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX 64
-#define CD_PART_MASK (CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK 0xa1
-#define GPCMD_CLOSE_TRACK 0x5b
-#define GPCMD_FLUSH_CACHE 0x35
-#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE 0xac
-#define GPCMD_INQUIRY 0x12
-#define GPCMD_LOAD_UNLOAD 0xa6
-#define GPCMD_MECHANISM_STATUS 0xbd
-#define GPCMD_MODE_SELECT_10 0x55
-#define GPCMD_MODE_SENSE_10 0x5a
-#define GPCMD_PAUSE_RESUME 0x4b
-#define GPCMD_PLAY_AUDIO_10 0x45
-#define GPCMD_PLAY_AUDIO_MSF 0x47
-#define GPCMD_PLAY_AUDIO_TI 0x48
-#define GPCMD_PLAY_CD 0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
-#define GPCMD_READ_10 0x28
-#define GPCMD_READ_12 0xa8
-#define GPCMD_READ_BUFFER 0x3c
-#define GPCMD_READ_BUFFER_CAPACITY 0x5c
-#define GPCMD_READ_CDVD_CAPACITY 0x25
-#define GPCMD_READ_CD 0xbe
-#define GPCMD_READ_CD_MSF 0xb9
-#define GPCMD_READ_DISC_INFO 0x51
-#define GPCMD_READ_DVD_STRUCTURE 0xad
-#define GPCMD_READ_FORMAT_CAPACITIES 0x23
-#define GPCMD_READ_HEADER 0x44
-#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
-#define GPCMD_REPAIR_RZONE_TRACK 0x58
-#define GPCMD_REPORT_KEY 0xa4
-#define GPCMD_REQUEST_SENSE 0x03
-#define GPCMD_RESERVE_RZONE_TRACK 0x53
-#define GPCMD_SEND_CUE_SHEET 0x5d
-#define GPCMD_SCAN 0xba
-#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xbf
-#define GPCMD_SEND_EVENT 0xa2
-#define GPCMD_SEND_KEY 0xa3
-#define GPCMD_SEND_OPC 0x54
-#define GPCMD_SET_READ_AHEAD 0xa7
-#define GPCMD_SET_STREAMING 0xb6
-#define GPCMD_START_STOP_UNIT 0x1b
-#define GPCMD_STOP_PLAY_SCAN 0x4e
-#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
-#define GPCMD_WRITE_10 0x2a
-#define GPCMD_WRITE_12 0xaa
-#define GPCMD_WRITE_AND_VERIFY_10 0x2e
-#define GPCMD_WRITE_BUFFER 0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though... Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED 0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI 0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS 0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE 0x00
-#define GPMODE_R_W_ERROR_PAGE 0x01
-#define GPMODE_WRITE_PARMS_PAGE 0x05
-#define GPMODE_WCACHING_PAGE 0x08
-#define GPMODE_AUDIO_CTL_PAGE 0x0e
-#define GPMODE_POWER_PAGE 0x1a
-#define GPMODE_FAULT_FAIL_PAGE 0x1c
-#define GPMODE_TO_PROTECT_PAGE 0x1d
-#define GPMODE_CAPABILITIES_PAGE 0x2a
-#define GPMODE_ALL_PAGES 0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE 0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL 0x00
-#define DVD_STRUCT_COPYRIGHT 0x01
-#define DVD_STRUCT_DISCKEY 0x02
-#define DVD_STRUCT_BCA 0x03
-#define DVD_STRUCT_MANUFACT 0x04
-
-struct dvd_layer {
- __u8 book_version : 4;
- __u8 book_type : 4;
- __u8 min_rate : 4;
- __u8 disc_size : 4;
- __u8 layer_type : 4;
- __u8 track_path : 1;
- __u8 nlayers : 2;
- __u8 track_density : 4;
- __u8 linear_density : 4;
- __u8 bca : 1;
- __u32 start_sector;
- __u32 end_sector;
- __u32 end_sector_l0;
-};
-
-#define DVD_LAYERS 4
-
-struct dvd_physical {
- __u8 type;
- __u8 layer_num;
- struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
- __u8 type;
-
- __u8 layer_num;
- __u8 cpst;
- __u8 rmi;
-};
-
-struct dvd_disckey {
- __u8 type;
-
- unsigned agid : 2;
- __u8 value[2048];
-};
-
-struct dvd_bca {
- __u8 type;
-
- int len;
- __u8 value[188];
-};
-
-struct dvd_manufact {
- __u8 type;
-
- __u8 layer_num;
- int len;
- __u8 value[2048];
-};
-
-typedef union {
- __u8 type;
-
- struct dvd_physical physical;
- struct dvd_copyright copyright;
- struct dvd_disckey disckey;
- struct dvd_bca bca;
- struct dvd_manufact manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID 0
-#define DVD_HOST_SEND_CHALLENGE 1
-#define DVD_LU_SEND_KEY1 2
-#define DVD_LU_SEND_CHALLENGE 3
-#define DVD_HOST_SEND_KEY2 4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED 5
-#define DVD_AUTH_FAILURE 6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY 7
-#define DVD_LU_SEND_ASF 8
-#define DVD_INVALIDATE_AGID 9
-#define DVD_LU_SEND_RPC_STATE 10
-#define DVD_HOST_SEND_RPC_STATE 11
-
-/* State data */
-typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
- __u8 type;
- unsigned agid : 2;
-};
-
-struct dvd_host_send_challenge {
- __u8 type;
- unsigned agid : 2;
-
- dvd_challenge chal;
-};
-
-struct dvd_send_key {
- __u8 type;
- unsigned agid : 2;
-
- dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
- __u8 type;
- unsigned agid : 2;
-
- dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT 0
-#define DVD_CPM_COPYRIGHTED 1
-
-#define DVD_CP_SEC_NONE 0
-#define DVD_CP_SEC_EXIST 1
-
-#define DVD_CGMS_UNRESTRICTED 0
-#define DVD_CGMS_SINGLE 2
-#define DVD_CGMS_RESTRICTED 3
-
-struct dvd_lu_send_title_key {
- __u8 type;
- unsigned agid : 2;
-
- dvd_key title_key;
- int lba;
- unsigned cpm : 1;
- unsigned cp_sec : 1;
- unsigned cgms : 2;
-};
-
-struct dvd_lu_send_asf {
- __u8 type;
- unsigned agid : 2;
-
- unsigned asf : 1;
-};
-
-struct dvd_host_send_rpcstate {
- __u8 type;
- __u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
- __u8 type : 2;
- __u8 vra : 3;
- __u8 ucca : 3;
- __u8 region_mask;
- __u8 rpc_scheme;
-};
-
-typedef union {
- __u8 type;
-
- struct dvd_lu_send_agid lsa;
- struct dvd_host_send_challenge hsc;
- struct dvd_send_key lsk;
- struct dvd_lu_send_challenge lsc;
- struct dvd_send_key hsk;
- struct dvd_lu_send_title_key lstk;
- struct dvd_lu_send_asf lsasf;
- struct dvd_host_send_rpcstate hrpcs;
- struct dvd_lu_send_rpcstate lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 valid : 1;
- __u8 error_code : 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 error_code : 7;
- __u8 valid : 1;
-#endif
- __u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 ili : 1;
- __u8 reserved2 : 1;
- __u8 sense_key : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 sense_key : 4;
- __u8 reserved2 : 1;
- __u8 ili : 1;
- __u8 reserved1 : 2;
-#endif
- __u8 information[4];
- __u8 add_sense_len;
- __u8 command_info[4];
- __u8 asc;
- __u8 ascq;
- __u8 fruc;
- __u8 sks[3];
- __u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT 0x0020 /* "Random Writable" */
-#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */
-#define CDF_MRW 0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW 0
-#define CDM_MRW_BGFORMAT_INACTIVE 1
-#define CDM_MRW_BGFORMAT_ACTIVE 2
-#define CDM_MRW_BGFORMAT_COMPLETE 3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA 0
-#define MRW_LBA_GAA 1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1 0x2c
-#define MRW_MODE_PC 0x03
-
-struct mrw_feature_desc {
- __be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 feature_version : 4;
- __u8 persistent : 1;
- __u8 curr : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 curr : 1;
- __u8 persistent : 1;
- __u8 feature_version : 4;
- __u8 reserved1 : 2;
-#endif
- __u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 7;
- __u8 write : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 write : 1;
- __u8 reserved2 : 7;
-#endif
- __u8 reserved3;
- __u8 reserved4;
- __u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
- __be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 feature_version : 4;
- __u8 persistent : 1;
- __u8 curr : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 curr : 1;
- __u8 persistent : 1;
- __u8 feature_version : 4;
- __u8 reserved1 : 2;
-#endif
- __u8 add_len;
- __u32 last_lba;
- __u32 block_size;
- __u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 7;
- __u8 page_present : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 page_present : 1;
- __u8 reserved2 : 7;
-#endif
- __u8 reserved3;
-};
-
-typedef struct {
- __be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 3;
- __u8 erasable : 1;
- __u8 border_status : 2;
- __u8 disc_status : 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 disc_status : 2;
- __u8 border_status : 2;
- __u8 erasable : 1;
- __u8 reserved1 : 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 n_first_track;
- __u8 n_sessions_lsb;
- __u8 first_track_lsb;
- __u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 did_v : 1;
- __u8 dbc_v : 1;
- __u8 uru : 1;
- __u8 reserved2 : 2;
- __u8 dbit : 1;
- __u8 mrw_status : 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 mrw_status : 2;
- __u8 dbit : 1;
- __u8 reserved2 : 2;
- __u8 uru : 1;
- __u8 dbc_v : 1;
- __u8 did_v : 1;
-#endif
- __u8 disc_type;
- __u8 n_sessions_msb;
- __u8 first_track_msb;
- __u8 last_track_msb;
- __u32 disc_id;
- __u32 lead_in;
- __u32 lead_out;
- __u8 disc_bar_code[8];
- __u8 reserved3;
- __u8 n_opc;
-} disc_information;
-
-typedef struct {
- __be16 track_information_length;
- __u8 track_lsb;
- __u8 session_lsb;
- __u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 2;
- __u8 damage : 1;
- __u8 copy : 1;
- __u8 track_mode : 4;
- __u8 rt : 1;
- __u8 blank : 1;
- __u8 packet : 1;
- __u8 fp : 1;
- __u8 data_mode : 4;
- __u8 reserved3 : 6;
- __u8 lra_v : 1;
- __u8 nwa_v : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 track_mode : 4;
- __u8 copy : 1;
- __u8 damage : 1;
- __u8 reserved2 : 2;
- __u8 data_mode : 4;
- __u8 fp : 1;
- __u8 packet : 1;
- __u8 blank : 1;
- __u8 rt : 1;
- __u8 nwa_v : 1;
- __u8 lra_v : 1;
- __u8 reserved3 : 6;
-#endif
- __be32 track_start;
- __be32 next_writable;
- __be32 free_blocks;
- __be32 fixed_packet_size;
- __be32 track_size;
- __be32 last_rec_address;
-} track_information;
-
-struct feature_header {
- __u32 data_len;
- __u8 reserved1;
- __u8 reserved2;
- __u16 curr_profile;
-};
-
-struct mode_page_header {
- __be16 mode_data_length;
- __u8 medium_type;
- __u8 reserved1;
- __u8 reserved2;
- __u8 reserved3;
- __be16 desc_length;
-};
-
-#ifdef __KERNEL__
#include <linux/fs.h> /* not really needed, later.. */
#include <linux/list.h>
+#include <uapi/linux/cdrom.h>
struct packet_command
{
@@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f)
{
return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
}
-#endif /* End of kernel only stuff */
-
#endif /* _LINUX_CDROM_H */
diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h
deleted file mode 100644
index 3753c33..0000000
--- a/include/linux/cgroupstats.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* cgroupstats.h - exporting per-cgroup statistics
- *
- * Copyright IBM Corporation, 2007
- * Author Balbir Singh <balbir@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_CGROUPSTATS_H
-#define _LINUX_CGROUPSTATS_H
-
-#include <linux/types.h>
-#include <linux/taskstats.h>
-
-/*
- * Data shared between user space and kernel space on a per cgroup
- * basis. This data is shared using taskstats.
- *
- * Most of these states are derived by looking at the task->state value
- * For the nr_io_wait state, a flag in the delay accounting structure
- * indicates that the task is waiting on IO
- *
- * Each member is aligned to a 8 byte boundary.
- */
-struct cgroupstats {
- __u64 nr_sleeping; /* Number of tasks sleeping */
- __u64 nr_running; /* Number of tasks running */
- __u64 nr_stopped; /* Number of tasks in stopped state */
- __u64 nr_uninterruptible; /* Number of tasks in uninterruptible */
- /* state */
- __u64 nr_io_wait; /* Number of tasks waiting on IO */
-};
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __CGROUPSTATS_CMD_MAX
- */
-
-enum {
- CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX, /* Reserved */
- CGROUPSTATS_CMD_GET, /* user->kernel request/get-response */
- CGROUPSTATS_CMD_NEW, /* kernel->user event */
- __CGROUPSTATS_CMD_MAX,
-};
-
-#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1)
-
-enum {
- CGROUPSTATS_TYPE_UNSPEC = 0, /* Reserved */
- CGROUPSTATS_TYPE_CGROUP_STATS, /* contains name + stats */
- __CGROUPSTATS_TYPE_MAX,
-};
-
-#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1)
-
-enum {
- CGROUPSTATS_CMD_ATTR_UNSPEC = 0,
- CGROUPSTATS_CMD_ATTR_FD,
- __CGROUPSTATS_CMD_ATTR_MAX,
-};
-
-#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1)
-
-#endif /* _LINUX_CGROUPSTATS_H */
diff --git a/include/linux/chio.h b/include/linux/chio.h
deleted file mode 100644
index d9bac7f..0000000
--- a/include/linux/chio.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * ioctl interface for the scsi media changer driver
- */
-
-/* changer element types */
-#define CHET_MT 0 /* media transport element (robot) */
-#define CHET_ST 1 /* storage element (media slots) */
-#define CHET_IE 2 /* import/export element */
-#define CHET_DT 3 /* data transfer element (tape/cdrom/whatever) */
-#define CHET_V1 4 /* vendor specific #1 */
-#define CHET_V2 5 /* vendor specific #2 */
-#define CHET_V3 6 /* vendor specific #3 */
-#define CHET_V4 7 /* vendor specific #4 */
-
-
-/*
- * CHIOGPARAMS
- * query changer properties
- *
- * CHIOVGPARAMS
- * query vendor-specific element types
- *
- * accessing elements works by specifing type and unit of the element.
- * for example, storage elements are addressed with type = CHET_ST and
- * unit = 0 .. cp_nslots-1
- *
- */
-struct changer_params {
- int cp_curpicker; /* current transport element */
- int cp_npickers; /* number of transport elements (CHET_MT) */
- int cp_nslots; /* number of storage elements (CHET_ST) */
- int cp_nportals; /* number of import/export elements (CHET_IE) */
- int cp_ndrives; /* number of data transfer elements (CHET_DT) */
-};
-struct changer_vendor_params {
- int cvp_n1; /* number of vendor specific elems (CHET_V1) */
- char cvp_label1[16];
- int cvp_n2; /* number of vendor specific elems (CHET_V2) */
- char cvp_label2[16];
- int cvp_n3; /* number of vendor specific elems (CHET_V3) */
- char cvp_label3[16];
- int cvp_n4; /* number of vendor specific elems (CHET_V4) */
- char cvp_label4[16];
- int reserved[8];
-};
-
-
-/*
- * CHIOMOVE
- * move a medium from one element to another
- */
-struct changer_move {
- int cm_fromtype; /* type/unit of source element */
- int cm_fromunit;
- int cm_totype; /* type/unit of destination element */
- int cm_tounit;
- int cm_flags;
-};
-#define CM_INVERT 1 /* flag: rotate media (for double-sided like MOD) */
-
-
-/*
- * CHIOEXCHANGE
- * move one medium from element #1 to element #2,
- * and another one from element #2 to element #3.
- * element #1 and #3 are allowed to be identical.
- */
-struct changer_exchange {
- int ce_srctype; /* type/unit of element #1 */
- int ce_srcunit;
- int ce_fdsttype; /* type/unit of element #2 */
- int ce_fdstunit;
- int ce_sdsttype; /* type/unit of element #3 */
- int ce_sdstunit;
- int ce_flags;
-};
-#define CE_INVERT1 1
-#define CE_INVERT2 2
-
-
-/*
- * CHIOPOSITION
- * move the transport element (robot arm) to a specific element.
- */
-struct changer_position {
- int cp_type;
- int cp_unit;
- int cp_flags;
-};
-#define CP_INVERT 1
-
-
-/*
- * CHIOGSTATUS
- * get element status for all elements of a specific type
- */
-struct changer_element_status {
- int ces_type;
- unsigned char __user *ces_data;
-};
-#define CESTATUS_FULL 0x01 /* full */
-#define CESTATUS_IMPEXP 0x02 /* media was imported (inserted by sysop) */
-#define CESTATUS_EXCEPT 0x04 /* error condition */
-#define CESTATUS_ACCESS 0x08 /* access allowed */
-#define CESTATUS_EXENAB 0x10 /* element can export media */
-#define CESTATUS_INENAB 0x20 /* element can import media */
-
-
-/*
- * CHIOGELEM
- * get more detailed status information for a single element
- */
-struct changer_get_element {
- int cge_type; /* type/unit */
- int cge_unit;
- int cge_status; /* status */
- int cge_errno; /* errno */
- int cge_srctype; /* source element of the last move/exchange */
- int cge_srcunit;
- int cge_id; /* scsi id (for data transfer elements) */
- int cge_lun; /* scsi lun (for data transfer elements) */
- char cge_pvoltag[36]; /* primary volume tag */
- char cge_avoltag[36]; /* alternate volume tag */
- int cge_flags;
-};
-/* flags */
-#define CGE_ERRNO 0x01 /* errno available */
-#define CGE_INVERT 0x02 /* media inverted */
-#define CGE_SRC 0x04 /* media src available */
-#define CGE_IDLUN 0x08 /* ID+LUN available */
-#define CGE_PVOLTAG 0x10 /* primary volume tag available */
-#define CGE_AVOLTAG 0x20 /* alternate volume tag available */
-
-
-/*
- * CHIOSVOLTAG
- * set volume tag
- */
-struct changer_set_voltag {
- int csv_type; /* type/unit */
- int csv_unit;
- char csv_voltag[36]; /* volume tag */
- int csv_flags;
-};
-#define CSV_PVOLTAG 0x01 /* primary volume tag */
-#define CSV_AVOLTAG 0x02 /* alternate volume tag */
-#define CSV_CLEARTAG 0x04 /* clear volume tag */
-
-/* ioctls */
-#define CHIOMOVE _IOW('c', 1,struct changer_move)
-#define CHIOEXCHANGE _IOW('c', 2,struct changer_exchange)
-#define CHIOPOSITION _IOW('c', 3,struct changer_position)
-#define CHIOGPICKER _IOR('c', 4,int) /* not impl. */
-#define CHIOSPICKER _IOW('c', 5,int) /* not impl. */
-#define CHIOGPARAMS _IOR('c', 6,struct changer_params)
-#define CHIOGSTATUS _IOW('c', 8,struct changer_element_status)
-#define CHIOGELEM _IOW('c',16,struct changer_get_element)
-#define CHIOINITELEM _IO('c',17)
-#define CHIOSVOLTAG _IOW('c',18,struct changer_set_voltag)
-#define CHIOGVPARAMS _IOR('c',19,struct changer_vendor_params)
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 3c4aac4..88bee3a 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -1,68 +1,10 @@
#ifndef _CM4000_H_
#define _CM4000_H_
-#include <linux/types.h>
+#include <uapi/linux/cm4000_cs.h>
-#define MAX_ATR 33
-
-#define CM4000_MAX_DEV 4
-
-/* those two structures are passed via ioctl() from/to userspace. They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
- __s32 atr_len;
- unsigned char atr[64];
- __s32 power_act;
- unsigned char bIFSD;
- unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference. With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
- __u32 protocol; /*T=0: 2^0, T=1: 2^1*/
- unsigned char flags;
- unsigned char pts1;
- unsigned char pts2;
- unsigned char pts3;
-} ptsreq_t;
-
-#define CM_IOC_MAGIC 'c'
-#define CM_IOC_MAXNR 255
-
-#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define CM_CARD_INSERTED 0x01
-#define CM_CARD_POWERED 0x02
-#define CM_ATR_PRESENT 0x04
-#define CM_ATR_VALID 0x08
-#define CM_STATE_VALID 0x0f
-/* extra info only from CM4000 */
-#define CM_NO_READER 0x10
-#define CM_BAD_CARD 0x20
-
-
-#ifdef __KERNEL__
#define DEVICE_NAME "cmm"
#define MODULE_NAME "cm4000_cs"
-#endif /* __KERNEL__ */
#endif /* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index d03612b..2c1bc1e 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -14,111 +14,11 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
-
#ifndef CN_PROC_H
#define CN_PROC_H
-#include <linux/types.h>
-
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
- PROC_CN_MCAST_LISTEN = 1,
- PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- * In user space - In kernel space
- *
- * parent process ID = parent->tgid
- * parent thread ID = parent->pid
- * child process ID = child->tgid
- * child thread ID = child->pid
- */
-
-struct proc_event {
- enum what {
- /* Use successive bits so the enums can be used to record
- * sets of events as well
- */
- PROC_EVENT_NONE = 0x00000000,
- PROC_EVENT_FORK = 0x00000001,
- PROC_EVENT_EXEC = 0x00000002,
- PROC_EVENT_UID = 0x00000004,
- PROC_EVENT_GID = 0x00000040,
- PROC_EVENT_SID = 0x00000080,
- PROC_EVENT_PTRACE = 0x00000100,
- PROC_EVENT_COMM = 0x00000200,
- /* "next" should be 0x00000400 */
- /* "last" is the last process event: exit */
- PROC_EVENT_EXIT = 0x80000000
- } what;
- __u32 cpu;
- __u64 __attribute__((aligned(8))) timestamp_ns;
- /* Number of nano seconds since system boot */
- union { /* must be last field of proc_event struct */
- struct {
- __u32 err;
- } ack;
-
- struct fork_proc_event {
- __kernel_pid_t parent_pid;
- __kernel_pid_t parent_tgid;
- __kernel_pid_t child_pid;
- __kernel_pid_t child_tgid;
- } fork;
-
- struct exec_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- } exec;
-
- struct id_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- union {
- __u32 ruid; /* task uid */
- __u32 rgid; /* task gid */
- } r;
- union {
- __u32 euid;
- __u32 egid;
- } e;
- } id;
-
- struct sid_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- } sid;
-
- struct ptrace_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- __kernel_pid_t tracer_pid;
- __kernel_pid_t tracer_tgid;
- } ptrace;
-
- struct comm_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- char comm[16];
- } comm;
-
- struct exit_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- __u32 exit_code, exit_signal;
- } exit;
- } event_data;
-};
+#include <uapi/linux/cn_proc.h>
-#ifdef __KERNEL__
#ifdef CONFIG_PROC_EVENTS
void proc_fork_connector(struct task_struct *task);
void proc_exec_connector(struct task_struct *task);
@@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task,
static inline void proc_exit_connector(struct task_struct *task)
{}
#endif /* CONFIG_PROC_EVENTS */
-#endif /* __KERNEL__ */
#endif /* CN_PROC_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
index 96c8769..cff544f 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance.
* Linux modifications by
* Peter Braam, Aug 1996
*/
-
#ifndef _CODA_HEADER_
#define _CODA_HEADER_
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
- ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
- long ts_sec;
- long ts_nsec;
-};
-#else /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
#if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
#else
-#define cdev_t dev_t
-#endif
-
-#ifdef __CYGWIN32__
-struct timespec {
- time_t tv_sec; /* seconds */
- long tv_nsec; /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char int8_t;
-typedef unsigned char u_int8_t;
-typedef short int16_t;
-typedef unsigned short u_int16_t;
-typedef int int32_t;
-typedef unsigned int u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN 255
-#define CODA_MAXPATHLEN 1024
-#define CODA_MAXSYMLINK 10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define C_O_READ 0x001
-#define C_O_WRITE 0x002
-#define C_O_TRUNC 0x010
-#define C_O_EXCL 0x100
-#define C_O_CREAT 0x200
-
-/* these are to find mode bits in Venus */
-#define C_M_READ 00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK 8 /* Test for writing upon create. */
-#define C_A_R_OK 4 /* Test for read permission. */
-#define C_A_W_OK 2 /* Test for write permission. */
-#define C_A_X_OK 1 /* Test for execute permission. */
-#define C_A_F_OK 0 /* Test for existence. */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
- u_int32_t d_fileno; /* file number of entry */
- u_int16_t d_reclen; /* length of this record */
- u_int8_t d_type; /* file type, see below */
- u_int8_t d_namlen; /* length of string in d_name */
- char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
- (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define CDT_UNKNOWN 0
-#define CDT_FIFO 1
-#define CDT_CHR 2
-#define CDT_DIR 4
-#define CDT_BLK 6
-#define CDT_REG 8
-#define CDT_LNK 10
-#define CDT_SOCK 12
-#define CDT_WHT 14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define IFTOCDT(mode) (((mode) & 0170000) >> 12)
-#define CDTTOIF(dirtype) ((dirtype) << 12)
-
#endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
- u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
- (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types. VNON means no type.
- */
-enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
- long va_type; /* vnode type (for create) */
- u_short va_mode; /* files access mode and type */
- short va_nlink; /* number of references to file */
- vuid_t va_uid; /* owner user id */
- vgid_t va_gid; /* owner group id */
- long va_fileid; /* file id */
- u_quad_t va_size; /* file size in bytes */
- long va_blocksize; /* blocksize preferred for i/o */
- struct timespec va_atime; /* time of last access */
- struct timespec va_mtime; /* time of last modification */
- struct timespec va_ctime; /* time file changed */
- u_long va_gen; /* generation number of file */
- u_long va_flags; /* flags defined for file */
- cdev_t va_rdev; /* device special file represents */
- u_quad_t va_bytes; /* bytes of disk space held by file */
- u_quad_t va_filerev; /* file modification number */
-};
-
+#include <uapi/linux/coda.h>
#endif
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
- int32_t f_blocks;
- int32_t f_bfree;
- int32_t f_bavail;
- int32_t f_files;
- int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT 2
-#define CODA_OPEN_BY_FD 3
-#define CODA_OPEN 4
-#define CODA_CLOSE 5
-#define CODA_IOCTL 6
-#define CODA_GETATTR 7
-#define CODA_SETATTR 8
-#define CODA_ACCESS 9
-#define CODA_LOOKUP 10
-#define CODA_CREATE 11
-#define CODA_REMOVE 12
-#define CODA_LINK 13
-#define CODA_RENAME 14
-#define CODA_MKDIR 15
-#define CODA_RMDIR 16
-#define CODA_SYMLINK 18
-#define CODA_READLINK 19
-#define CODA_FSYNC 20
-#define CODA_VGET 22
-#define CODA_SIGNAL 23
-#define CODA_REPLACE 24 /* DOWNCALL */
-#define CODA_FLUSH 25 /* DOWNCALL */
-#define CODA_PURGEUSER 26 /* DOWNCALL */
-#define CODA_ZAPFILE 27 /* DOWNCALL */
-#define CODA_ZAPDIR 28 /* DOWNCALL */
-#define CODA_PURGEFID 30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE 32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS 34
-#define CODA_STORE 35
-#define CODA_RELEASE 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE 8192
-#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\
- VC_MAXDATASIZE
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- * Venus <-> Coda RPC arguments
- */
-struct coda_in_hdr {
- u_int32_t opcode;
- u_int32_t unique; /* Keep multiple outstanding msgs distinct */
- pid_t pid;
- pid_t pgid;
- vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
- u_int32_t opcode;
- u_int32_t unique;
- u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
-};
-
-struct coda_root_in {
- struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_out {
- struct coda_out_hdr oh;
- cdev_t dev;
- ino_t inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_store_out {
- struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_release_out {
- struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_close_out {
- struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int cmd;
- int len;
- int rwflag;
- char *data; /* Place holder for data. */
-};
-
-struct coda_ioctl_out {
- struct coda_out_hdr oh;
- int len;
- caddr_t data; /* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
- struct coda_out_hdr oh;
- struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
- struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_access_out {
- struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE 0x01
-#define CLU_CASE_INSENSITIVE 0x02
-
-/* coda_lookup: */
-struct coda_lookup_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
- int flags;
-};
-
-struct coda_lookup_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- int vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
- int excl;
- int mode;
- int name; /* Place holder for data. */
-};
-
-struct coda_create_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
-};
-
-struct coda_remove_out {
- struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
- struct coda_in_hdr ih;
- struct CodaFid sourceFid; /* cnode to link *to* */
- struct CodaFid destFid; /* Directory in which to place link */
- int tname; /* Place holder for data. */
-};
-
-struct coda_link_out {
- struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
- struct coda_in_hdr ih;
- struct CodaFid sourceFid;
- int srcname;
- struct CodaFid destFid;
- int destname;
-};
-
-struct coda_rename_out {
- struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
- int name; /* Place holder for data. */
-};
-
-struct coda_mkdir_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
-};
-
-struct coda_rmdir_out {
- struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid; /* Directory to put symlink in */
- int srcname;
- struct coda_vattr attr;
- int tname;
-};
-
-struct coda_symlink_out {
- struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
- struct coda_out_hdr oh;
- int count;
- caddr_t data; /* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
- struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_vget_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- int vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
- struct coda_out_hdr oh;
- vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */
-struct coda_zapdir_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */
-struct coda_purgefid_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
- struct coda_out_hdr oh;
- struct CodaFid NewFid;
- struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_by_fd_out {
- struct coda_out_hdr oh;
- int fd;
-
-#ifdef __KERNEL__
- struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_by_path_out {
- struct coda_out_hdr oh;
- int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
- struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
- struct coda_out_hdr oh;
- struct coda_statfs stat;
-};
-
-/*
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP.
- * For instance, if the fid is inconsistent.
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE 0x80000000
-
-union inputArgs {
- struct coda_in_hdr ih; /* NB: every struct below begins with an ih */
- struct coda_open_in coda_open;
- struct coda_store_in coda_store;
- struct coda_release_in coda_release;
- struct coda_close_in coda_close;
- struct coda_ioctl_in coda_ioctl;
- struct coda_getattr_in coda_getattr;
- struct coda_setattr_in coda_setattr;
- struct coda_access_in coda_access;
- struct coda_lookup_in coda_lookup;
- struct coda_create_in coda_create;
- struct coda_remove_in coda_remove;
- struct coda_link_in coda_link;
- struct coda_rename_in coda_rename;
- struct coda_mkdir_in coda_mkdir;
- struct coda_rmdir_in coda_rmdir;
- struct coda_symlink_in coda_symlink;
- struct coda_readlink_in coda_readlink;
- struct coda_fsync_in coda_fsync;
- struct coda_vget_in coda_vget;
- struct coda_open_by_fd_in coda_open_by_fd;
- struct coda_open_by_path_in coda_open_by_path;
- struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
- struct coda_out_hdr oh; /* NB: every struct below begins with an oh */
- struct coda_root_out coda_root;
- struct coda_open_out coda_open;
- struct coda_ioctl_out coda_ioctl;
- struct coda_getattr_out coda_getattr;
- struct coda_lookup_out coda_lookup;
- struct coda_create_out coda_create;
- struct coda_mkdir_out coda_mkdir;
- struct coda_readlink_out coda_readlink;
- struct coda_vget_out coda_vget;
- struct coda_purgeuser_out coda_purgeuser;
- struct coda_zapfile_out coda_zapfile;
- struct coda_zapdir_out coda_zapdir;
- struct coda_purgefid_out coda_purgefid;
- struct coda_replace_out coda_replace;
- struct coda_open_by_fd_out coda_open_by_fd;
- struct coda_open_by_path_out coda_open_by_path;
- struct coda_statfs_out coda_statfs;
-};
-
-union coda_downcalls {
- /* CODA_INVALIDATE is a venus->kernel call */
- /* CODA_FLUSH is a venus->kernel call */
- struct coda_purgeuser_out purgeuser;
- struct coda_zapfile_out zapfile;
- struct coda_zapdir_out zapdir;
- struct coda_purgefid_out purgefid;
- struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
- void __user *in; /* Data to be transferred in */
- void __user *out; /* Data to be transferred out */
- u_short in_size; /* Size of input buffer <= 2K */
- u_short out_size; /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
- const char __user *path;
- int follow;
- struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL ".CONTROL"
-#define CODA_CONTROLLEN 8
-#define CTL_INO -1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
- int version;
- int fd; /* Opened device */
-};
-
-#endif
-
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 72f2d2f..8031d6e 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -1,14 +1,9 @@
#ifndef __CODA_PSDEV_H
#define __CODA_PSDEV_H
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS 5 /* how many do we allow */
-
-#ifdef __KERNEL__
#include <linux/backing-dev.h>
#include <linux/mutex.h>
+#include <uapi/linux/coda_psdev.h>
struct kstatfs;
@@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
*/
extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
- struct list_head uc_chain;
- caddr_t uc_data;
- u_short uc_flags;
- u_short uc_inSize; /* Size is at most 5000 bytes */
- u_short uc_outSize;
- u_short uc_opcode; /* copied from data to save lookup */
- int uc_unique;
- wait_queue_head_t uc_sleep; /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC 0x1
-#define CODA_REQ_READ 0x2
-#define CODA_REQ_WRITE 0x4
-#define CODA_REQ_ABORT 0x8
-
#endif
diff --git a/include/linux/coff.h b/include/linux/coff.h
deleted file mode 100644
index 6354a7f..0000000
--- a/include/linux/coff.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/* This file is derived from the GAS 2.1.4 assembler control file.
- The GAS product is under the GNU General Public License, version 2 or later.
- As such, this file is also under that license.
-
- If the file format changes in the COFF object, this file should be
- subsequently updated to reflect the changes.
-
- The actual loader module only uses a few of these structures. The full
- set is documented here because I received the full set. If you wish
- more information about COFF, then O'Reilly has a very excellent book.
-*/
-
-#define E_SYMNMLEN 8 /* Number of characters in a symbol name */
-#define E_FILNMLEN 14 /* Number of characters in a file name */
-#define E_DIMNUM 4 /* Number of array dimensions in auxiliary entry */
-
-/*
- * These defines are byte order independent. There is no alignment of fields
- * permitted in the structures. Therefore they are declared as characters
- * and the values loaded from the character positions. It also makes it
- * nice to have it "endian" independent.
- */
-
-/* Load a short int from the following tables with little-endian formats */
-#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
- ((unsigned short)((unsigned char)ps[0]))))
-
-/* Load a long int from the following tables with little-endian formats */
-#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
- ((unsigned long)((unsigned char)ps[2])<<16) |\
- ((unsigned long)((unsigned char)ps[1])<<8) |\
- ((unsigned long)((unsigned char)ps[0])))))
-
-/* Load a short int from the following tables with big-endian formats */
-#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
- ((unsigned short)((unsigned char)ps[1]))))
-
-/* Load a long int from the following tables with big-endian formats */
-#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
- ((unsigned long)((unsigned char)ps[1])<<16) |\
- ((unsigned long)((unsigned char)ps[2])<<8) |\
- ((unsigned long)((unsigned char)ps[3])))))
-
-/* These may be overridden later by brain dead implementations which generate
- a big-endian header with little-endian data. In that case, generate a
- replacement macro which tests a flag and uses either of the two above
- as appropriate. */
-
-#define COFF_LONG(v) COFF_LONG_L(v)
-#define COFF_SHORT(v) COFF_SHORT_L(v)
-
-/*** coff information for Intel 386/486. */
-
-/********************** FILE HEADER **********************/
-
-struct COFF_filehdr {
- char f_magic[2]; /* magic number */
- char f_nscns[2]; /* number of sections */
- char f_timdat[4]; /* time & date stamp */
- char f_symptr[4]; /* file pointer to symtab */
- char f_nsyms[4]; /* number of symtab entries */
- char f_opthdr[2]; /* sizeof(optional hdr) */
- char f_flags[2]; /* flags */
-};
-
-/*
- * Bits for f_flags:
- *
- * F_RELFLG relocation info stripped from file
- * F_EXEC file is executable (i.e. no unresolved external
- * references)
- * F_LNNO line numbers stripped from file
- * F_LSYMS local symbols stripped from file
- * F_MINMAL this is a minimal object file (".m") output of fextract
- * F_UPDATE this is a fully bound update file, output of ogen
- * F_SWABD this file has had its bytes swabbed (in names)
- * F_AR16WR this file has the byte ordering of an AR16WR
- * (e.g. 11/70) machine
- * F_AR32WR this file has the byte ordering of an AR32WR machine
- * (e.g. vax and iNTEL 386)
- * F_AR32W this file has the byte ordering of an AR32W machine
- * (e.g. 3b,maxi)
- * F_PATCH file contains "patch" list in optional header
- * F_NODF (minimal file only) no decision functions for
- * replaced functions
- */
-
-#define COFF_F_RELFLG 0000001
-#define COFF_F_EXEC 0000002
-#define COFF_F_LNNO 0000004
-#define COFF_F_LSYMS 0000010
-#define COFF_F_MINMAL 0000020
-#define COFF_F_UPDATE 0000040
-#define COFF_F_SWABD 0000100
-#define COFF_F_AR16WR 0000200
-#define COFF_F_AR32WR 0000400
-#define COFF_F_AR32W 0001000
-#define COFF_F_PATCH 0002000
-#define COFF_F_NODF 0002000
-
-#define COFF_I386MAGIC 0x14c /* Linux's system */
-
-#if 0 /* Perhaps, someday, these formats may be used. */
-#define COFF_I386PTXMAGIC 0x154
-#define COFF_I386AIXMAGIC 0x175 /* IBM's AIX system */
-#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
- && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
- && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
-#else
-#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
-#endif
-
-#define COFF_FILHDR struct COFF_filehdr
-#define COFF_FILHSZ sizeof(COFF_FILHDR)
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-/* Linux COFF must have this "optional" header. Standard COFF has no entry
- location for the "entry" point. They normally would start with the first
- location of the .text section. This is not a good idea for linux. So,
- the use of this "optional" header is not optional. It is required.
-
- Do not be tempted to assume that the size of the optional header is
- a constant and simply index the next byte by the size of this structure.
- Use the 'f_opthdr' field in the main coff header for the size of the
- structure actually written to the file!!
-*/
-
-typedef struct
-{
- char magic[2]; /* type of file */
- char vstamp[2]; /* version stamp */
- char tsize[4]; /* text size in bytes, padded to FW bdry */
- char dsize[4]; /* initialized data " " */
- char bsize[4]; /* uninitialized data " " */
- char entry[4]; /* entry pt. */
- char text_start[4]; /* base of text used for this file */
- char data_start[4]; /* base of data used for this file */
-}
-COFF_AOUTHDR;
-
-#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
-
-#define COFF_STMAGIC 0401
-#define COFF_OMAGIC 0404
-#define COFF_JMAGIC 0407 /* dirty text and data image, can't share */
-#define COFF_DMAGIC 0410 /* dirty text segment, data aligned */
-#define COFF_ZMAGIC 0413 /* The proper magic number for executables */
-#define COFF_SHMAGIC 0443 /* shared library header */
-
-/********************** SECTION HEADER **********************/
-
-struct COFF_scnhdr {
- char s_name[8]; /* section name */
- char s_paddr[4]; /* physical address, aliased s_nlib */
- char s_vaddr[4]; /* virtual address */
- char s_size[4]; /* section size */
- char s_scnptr[4]; /* file ptr to raw data for section */
- char s_relptr[4]; /* file ptr to relocation */
- char s_lnnoptr[4]; /* file ptr to line numbers */
- char s_nreloc[2]; /* number of relocation entries */
- char s_nlnno[2]; /* number of line number entries */
- char s_flags[4]; /* flags */
-};
-
-#define COFF_SCNHDR struct COFF_scnhdr
-#define COFF_SCNHSZ sizeof(COFF_SCNHDR)
-
-/*
- * names of "special" sections
- */
-
-#define COFF_TEXT ".text"
-#define COFF_DATA ".data"
-#define COFF_BSS ".bss"
-#define COFF_COMMENT ".comment"
-#define COFF_LIB ".lib"
-
-#define COFF_SECT_TEXT 0 /* Section for instruction code */
-#define COFF_SECT_DATA 1 /* Section for initialized globals */
-#define COFF_SECT_BSS 2 /* Section for un-initialized globals */
-#define COFF_SECT_REQD 3 /* Minimum number of sections for good file */
-
-#define COFF_STYP_REG 0x00 /* regular segment */
-#define COFF_STYP_DSECT 0x01 /* dummy segment */
-#define COFF_STYP_NOLOAD 0x02 /* no-load segment */
-#define COFF_STYP_GROUP 0x04 /* group segment */
-#define COFF_STYP_PAD 0x08 /* .pad segment */
-#define COFF_STYP_COPY 0x10 /* copy section */
-#define COFF_STYP_TEXT 0x20 /* .text segment */
-#define COFF_STYP_DATA 0x40 /* .data segment */
-#define COFF_STYP_BSS 0x80 /* .bss segment */
-#define COFF_STYP_INFO 0x200 /* .comment section */
-#define COFF_STYP_OVER 0x400 /* overlay section */
-#define COFF_STYP_LIB 0x800 /* library section */
-
-/*
- * Shared libraries have the following section header in the data field for
- * each library.
- */
-
-struct COFF_slib {
- char sl_entsz[4]; /* Size of this entry */
- char sl_pathndx[4]; /* size of the header field */
-};
-
-#define COFF_SLIBHD struct COFF_slib
-#define COFF_SLIBSZ sizeof(COFF_SLIBHD)
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-
-struct COFF_lineno {
- union {
- char l_symndx[4]; /* function name symbol index, iff l_lnno == 0*/
- char l_paddr[4]; /* (physical) address of line number */
- } l_addr;
- char l_lnno[2]; /* line number */
-};
-
-#define COFF_LINENO struct COFF_lineno
-#define COFF_LINESZ 6
-
-/********************** SYMBOLS **********************/
-
-#define COFF_E_SYMNMLEN 8 /* # characters in a short symbol name */
-#define COFF_E_FILNMLEN 14 /* # characters in a file name */
-#define COFF_E_DIMNUM 4 /* # array dimensions in auxiliary entry */
-
-/*
- * All symbols and sections have the following definition
- */
-
-struct COFF_syment
-{
- union {
- char e_name[E_SYMNMLEN]; /* Symbol name (first 8 characters) */
- struct {
- char e_zeroes[4]; /* Leading zeros */
- char e_offset[4]; /* Offset if this is a header section */
- } e;
- } e;
-
- char e_value[4]; /* Value (address) of the segment */
- char e_scnum[2]; /* Section number */
- char e_type[2]; /* Type of section */
- char e_sclass[1]; /* Loader class */
- char e_numaux[1]; /* Number of auxiliary entries which follow */
-};
-
-#define COFF_N_BTMASK (0xf) /* Mask for important class bits */
-#define COFF_N_TMASK (0x30) /* Mask for important type bits */
-#define COFF_N_BTSHFT (4) /* # bits to shift class field */
-#define COFF_N_TSHIFT (2) /* # bits to shift type field */
-
-/*
- * Auxiliary entries because the main table is too limiting.
- */
-
-union COFF_auxent {
-
-/*
- * Debugger information
- */
-
- struct {
- char x_tagndx[4]; /* str, un, or enum tag indx */
- union {
- struct {
- char x_lnno[2]; /* declaration line number */
- char x_size[2]; /* str/union/array size */
- } x_lnsz;
- char x_fsize[4]; /* size of function */
- } x_misc;
-
- union {
- struct { /* if ISFCN, tag, or .bb */
- char x_lnnoptr[4]; /* ptr to fcn line # */
- char x_endndx[4]; /* entry ndx past block end */
- } x_fcn;
-
- struct { /* if ISARY, up to 4 dimen. */
- char x_dimen[E_DIMNUM][2];
- } x_ary;
- } x_fcnary;
-
- char x_tvndx[2]; /* tv index */
- } x_sym;
-
-/*
- * Source file names (debugger information)
- */
-
- union {
- char x_fname[E_FILNMLEN];
- struct {
- char x_zeroes[4];
- char x_offset[4];
- } x_n;
- } x_file;
-
-/*
- * Section information
- */
-
- struct {
- char x_scnlen[4]; /* section length */
- char x_nreloc[2]; /* # relocation entries */
- char x_nlinno[2]; /* # line numbers */
- } x_scn;
-
-/*
- * Transfer vector (branch table)
- */
-
- struct {
- char x_tvfill[4]; /* tv fill value */
- char x_tvlen[2]; /* length of .tv */
- char x_tvran[2][2]; /* tv range */
- } x_tv; /* info about .tv section (in auxent of symbol .tv)) */
-};
-
-#define COFF_SYMENT struct COFF_syment
-#define COFF_SYMESZ 18
-#define COFF_AUXENT union COFF_auxent
-#define COFF_AUXESZ 18
-
-#define COFF_ETEXT "etext"
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct COFF_reloc {
- char r_vaddr[4]; /* Virtual address of item */
- char r_symndx[4]; /* Symbol index in the symtab */
- char r_type[2]; /* Relocation type */
-};
-
-#define COFF_RELOC struct COFF_reloc
-#define COFF_RELSZ 10
-
-#define COFF_DEF_DATA_SECTION_ALIGNMENT 4
-#define COFF_DEF_BSS_SECTION_ALIGNMENT 4
-#define COFF_DEF_TEXT_SECTION_ALIGNMENT 4
-
-/* For new sections we haven't heard of before */
-#define COFF_DEF_SECTION_ALIGNMENT 4
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 7638407..b2b5a41 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -18,63 +18,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
#ifndef __CONNECTOR_H
#define __CONNECTOR_H
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC 0x1
-#define CN_VAL_PROC 0x1
-#define CN_IDX_CIFS 0x2
-#define CN_VAL_CIFS 0x1
-#define CN_W1_IDX 0x3 /* w1 communication */
-#define CN_W1_VAL 0x1
-#define CN_IDX_V86D 0x4
-#define CN_VAL_V86D_UVESAFB 0x1
-#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX 0x6
-#define CN_DST_VAL 0x1
-#define CN_IDX_DM 0x7 /* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG 0x1
-#define CN_IDX_DRBD 0x8
-#define CN_VAL_DRBD 0x1
-#define CN_KVP_IDX 0x9 /* HyperV KVP */
-#define CN_KVP_VAL 0x1 /* queries from the kernel */
-
-#define CN_NETLINK_USERS 10 /* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE 16384
-
-/*
- * idx and val are unique identifiers which
- * are used for message routing and
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
- __u32 idx;
- __u32 val;
-};
-
-struct cn_msg {
- struct cb_id id;
-
- __u32 seq;
- __u32 ack;
-
- __u16 len; /* Length of the following data */
- __u16 flags;
- __u8 data[0];
-};
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
@@ -82,6 +28,7 @@ struct cn_msg {
#include <linux/workqueue.h>
#include <net/sock.h>
+#include <uapi/linux/connector.h>
#define CN_CBQ_NAMELEN 32
@@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev);
int cn_cb_equal(struct cb_id *, struct cb_id *);
-#endif /* __KERNEL__ */
#endif /* __CONNECTOR_H */
diff --git a/include/linux/const.h b/include/linux/const.h
deleted file mode 100644
index c22c707..0000000
--- a/include/linux/const.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* const.h: Macros for dealing with constants. */
-
-#ifndef _LINUX_CONST_H
-#define _LINUX_CONST_H
-
-/* Some constant macros are used in both assembler and
- * C code. Therefore we cannot annotate them always with
- * 'UL' and other type specifiers unilaterally. We
- * use the following macros to deal with this.
- *
- * Similarly, _AT() will cast an expression with a type in C, but
- * leave it unchanged in asm.
- */
-
-#ifdef __ASSEMBLY__
-#define _AC(X,Y) X
-#define _AT(T,X) X
-#else
-#define __AC(X,Y) (X##Y)
-#define _AC(X,Y) __AC(X,Y)
-#define _AT(T,X) ((T)(X))
-#endif
-
-#endif /* !(_LINUX_CONST_H) */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 0e7bf27..1337896 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -1,94 +1,10 @@
#ifndef __CRAMFS_H
#define __CRAMFS_H
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/cramfs_fs.h>
-#define CRAMFS_SIGNATURE "Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
- __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
- /* SIZE for device files is i_rdev */
- __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
- /* NAMELEN is the length of the file name, divided by 4 and
- rounded up. (cramfs doesn't support hard links.) */
- /* OFFSET: For symlinks and non-empty regular files, this
- contains the offset (divided by 4) of the file data in
- compressed form (starting with an array of block pointers;
- see README). For non-empty directories it is the offset
- (divided by 4) of the inode of the first file in that
- directory. For anything else, offset is zero. */
- __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
- __u32 crc;
- __u32 edition;
- __u32 blocks;
- __u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
- __u32 magic; /* 0x28cd3d45 - random number */
- __u32 size; /* length in bytes */
- __u32 flags; /* feature flags */
- __u32 future; /* reserved for future use */
- __u8 signature[16]; /* "Compressed ROMFS" */
- struct cramfs_info fsid; /* unique filesystem info */
- __u8 name[16]; /* user-defined name */
- struct cramfs_inode root; /* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */
-#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */
-
-/*
- * Valid values in super.flags. Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \
- | CRAMFS_FLAG_HOLES \
- | CRAMFS_FLAG_WRONG_SIGNATURE \
- | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
/* Uncompression interfaces to the underlying zlib */
int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
int cramfs_uncompress_init(void);
void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
index 9f9865f..b723328 100644
--- a/include/linux/cuda.h
+++ b/include/linux/cuda.h
@@ -4,38 +4,15 @@
*
* Copyright (C) 1996 Paul Mackerras.
*/
-
#ifndef _LINUX_CUDA_H
#define _LINUX_CUDA_H
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START 0
-#define CUDA_AUTOPOLL 1
-#define CUDA_GET_6805_ADDR 2
-#define CUDA_GET_TIME 3
-#define CUDA_GET_PRAM 7
-#define CUDA_SET_6805_ADDR 8
-#define CUDA_SET_TIME 9
-#define CUDA_POWERDOWN 0xa
-#define CUDA_POWERUP_TIME 0xb
-#define CUDA_SET_PRAM 0xc
-#define CUDA_MS_RESET 0xd
-#define CUDA_SEND_DFAC 0xe
-#define CUDA_RESET_SYSTEM 0x11
-#define CUDA_SET_IPL 0x12
-#define CUDA_SET_AUTO_RATE 0x14
-#define CUDA_GET_AUTO_RATE 0x16
-#define CUDA_SET_DEVICE_LIST 0x19
-#define CUDA_GET_DEVICE_LIST 0x1a
-#define CUDA_GET_SET_IIC 0x22
+#include <uapi/linux/cuda.h>
-#ifdef __KERNEL__
extern int find_via_cuda(void);
extern int cuda_request(struct adb_request *req,
void (*done)(struct adb_request *), int nbytes, ...);
extern void cuda_poll(void);
-#endif /* __KERNEL */
-
#endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049ea..19ae518 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
*
*
*/
-
#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H
-#include <linux/types.h>
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
- __kernel_time_t in_use; /* Time device has been in use (secs) */
- __kernel_time_t recv_idle; /* Time since last char received (secs) */
- __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */
- unsigned long recv_bytes; /* Bytes received */
- unsigned long xmit_bytes; /* Bytes transmitted */
- unsigned long overruns; /* Input overruns */
- unsigned long frame_errs; /* Input framing errors */
- unsigned long parity_errs; /* Input parity errors */
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-#define CYSETRFLOW 0x43590a
-#define CYGETRFLOW 0x43590b
-#define CYSETRTSDTR_INV 0x43590c
-#define CYGETRTSDTR_INV 0x43590d
-#define CYZSETPOLLCYCLE 0x43590e
-#define CYZGETPOLLCYCLE 0x43590f
-#define CYGETCD1400VER 0x435910
-#define CYSETWAIT 0x435912
-#define CYGETWAIT 0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC ('M' << 8)
-#define CZ_NBOARDS (CZIOC|0xfa)
-#define CZ_BOOT_START (CZIOC|0xfb)
-#define CZ_BOOT_DATA (CZIOC|0xfc)
-#define CZ_BOOT_END (CZIOC|0xfd)
-#define CZ_TEST (CZIOC|0xfe)
-
-#define CZ_DEF_POLL (HZ/25)
-
-#define MAX_BOARD 4 /* Max number of boards */
-#define MAX_DEV 256 /* Max number of ports total */
-#define CYZ_MAX_SPEED 921600
-
-#define CYZ_FIFO_SIZE 16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
- unsigned short nboard;
- int status[MAX_BOARD];
- int nchannel[MAX_BOARD];
- int fw_rev[MAX_BOARD];
- unsigned long offset;
- unsigned long data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- * Memory Window Sizes
- */
-
-#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
-#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
- 8Zo V.2 */
-#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
-
-/*
- * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- * normally will access only interested on the fpga_id, fpga_version,
- * start_cpu and stop_cpu.
- */
-
-struct CUSTOM_REG {
- __u32 fpga_id; /* FPGA Identification Register */
- __u32 fpga_version; /* FPGA Version Number Register */
- __u32 cpu_start; /* CPU start Register (write) */
- __u32 cpu_stop; /* CPU stop Register (write) */
- __u32 misc_reg; /* Miscellaneous Register */
- __u32 idt_mode; /* IDT mode Register */
- __u32 uart_irq_status; /* UART IRQ status Register */
- __u32 clear_timer0_irq; /* Clear timer interrupt Register */
- __u32 clear_timer1_irq; /* Clear timer interrupt Register */
- __u32 clear_timer2_irq; /* Clear timer interrupt Register */
- __u32 test_register; /* Test Register */
- __u32 test_count; /* Test Count Register */
- __u32 timer_select; /* Timer select register */
- __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- __u32 ram_wait_state; /* RAM wait-state Register */
- __u32 uart_wait_state; /* UART wait-state Register */
- __u32 timer_wait_state; /* timer wait-state Register */
- __u32 ack_wait_state; /* ACK wait State Register */
-};
-
-/*
- * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- * registers. This structure can be used to access the 9060 registers
- * (memory mapped).
- */
-
-struct RUNTIME_9060 {
- __u32 loc_addr_range; /* 00h - Local Address Range */
- __u32 loc_addr_base; /* 04h - Local Address Base */
- __u32 loc_arbitr; /* 08h - Local Arbitration */
- __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- __u32 loc_rom_range; /* 10h - Local ROM Range */
- __u32 loc_rom_base; /* 14h - Local ROM Base */
- __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
- __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
- __u32 loc_range_io; /* 24h - Local Range for Master IO */
- __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
- __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- __u32 filler1; /* 30h */
- __u32 filler2; /* 34h */
- __u32 filler3; /* 38h */
- __u32 filler4; /* 3Ch */
- __u32 mail_box_0; /* 40h - Mail Box 0 */
- __u32 mail_box_1; /* 44h - Mail Box 1 */
- __u32 mail_box_2; /* 48h - Mail Box 2 */
- __u32 mail_box_3; /* 4Ch - Mail Box 3 */
- __u32 filler5; /* 50h */
- __u32 filler6; /* 54h */
- __u32 filler7; /* 58h */
- __u32 filler8; /* 5Ch */
- __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
- __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
- __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
-#define WIN_CREG 0x14000001L /* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define TIMER_BY_1M 0x00 /* clock divided by 1M */
-#define TIMER_BY_256K 0x01 /* clock divided by 256k */
-#define TIMER_BY_128K 0x02 /* clock divided by 128k */
-#define TIMER_BY_32K 0x03 /* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- * This file contains the definitions for interfacing with the
- * Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define MAX_CHAN 64 /* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS 0x00000180L /* signature/pointer address */
-#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
-#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
-#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
-
-#define ZF_TINACT_DEF 1000 /* default inactivity timeout
- (1000 ms) */
-#define ZF_TINACT ZF_TINACT_DEF
-
-struct FIRM_ID {
- __u32 signature; /* ZFIRM/U signature */
- __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define C_OS_LINUX 0x00000030 /* generic Linux system */
-
-/* channel op_mode */
-
-#define C_CH_DISABLE 0x00000000 /* channel is disabled */
-#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
-#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
-#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
-#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
-
-/* comm_parity - parity */
-
-#define C_PR_NONE 0x00000000 /* None */
-#define C_PR_ODD 0x00000001 /* Odd */
-#define C_PR_EVEN 0x00000002 /* Even */
-#define C_PR_MARK 0x00000004 /* Mark */
-#define C_PR_SPACE 0x00000008 /* Space */
-#define C_PR_PARITY 0x000000ff
-
-#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
-#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5 0x00000001
-#define C_DL_CS6 0x00000002
-#define C_DL_CS7 0x00000004
-#define C_DL_CS8 0x00000008
-#define C_DL_CS 0x0000000f
-#define C_DL_1STOP 0x00000010
-#define C_DL_15STOP 0x00000020
-#define C_DL_2STOP 0x00000040
-#define C_DL_STOP 0x000000f0
-
-/* interrupt enabling/status */
-
-#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
-#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
-#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
-#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
-#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
-#define C_IN_MDCD 0x00000100 /* modem DCD change */
-#define C_IN_MDSR 0x00000200 /* modem DSR change */
-#define C_IN_MRI 0x00000400 /* modem RI change */
-#define C_IN_MCTS 0x00000800 /* modem CTS change */
-#define C_IN_RXBRK 0x00001000 /* Break received */
-#define C_IN_PR_ERROR 0x00002000 /* parity error */
-#define C_IN_FR_ERROR 0x00004000 /* frame error */
-#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
-#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
-#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
-#define C_IN_MRTS 0x00040000 /* modem RTS drop */
-#define C_IN_ICHAR 0x00080000
-
-/* flow control */
-
-#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
-#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
-#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
-#define C_FL_SWFLOW 0x0000000f
-
-/* flow status */
-
-#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
-#define C_FS_SENDING 0x00000001 /* UART is sending data */
-#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
- IOCTLM command */
-#define C_RS_RTS 0x00000001 /* RTS */
-#define C_RS_DTR 0x00000004 /* DTR */
-#define C_RS_DCD 0x00000100 /* CD */
-#define C_RS_DSR 0x00000200 /* DSR */
-#define C_RS_RI 0x00000400 /* RI */
-#define C_RS_CTS 0x00000800 /* CTS */
-
-/* commands Host <-> Board */
-
-#define C_CM_RESET 0x01 /* reset/flush buffers */
-#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
-#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
-#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
-#define C_CM_SENDXOFF 0x10 /* send Xoff */
-#define C_CM_SENDXON 0x11 /* send Xon */
-#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
-#define C_CM_SENDBRK 0x41 /* send break */
-#define C_CM_INTBACK 0x42 /* Interrupt back */
-#define C_CM_SET_BREAK 0x43 /* Tx break on */
-#define C_CM_CLR_BREAK 0x44 /* Tx break off */
-#define C_CM_CMD_DONE 0x45 /* Previous command done */
-#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
-#define C_CM_TINACT 0x51 /* set inactivity detection */
-#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
-#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
-#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
-#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
-#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
-#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
-#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
- driver */
-#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
- driver */
-
-#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
-#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
-#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
-#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
-#define C_CM_TXFEMPTY 0x64
-#define C_CM_ICHAR 0x65
-#define C_CM_MDCD 0x70 /* modem DCD change */
-#define C_CM_MDSR 0x71 /* modem DSR change */
-#define C_CM_MRI 0x72 /* modem RI change */
-#define C_CM_MCTS 0x73 /* modem CTS change */
-#define C_CM_MRTS 0x74 /* modem RTS drop */
-#define C_CM_RXBRK 0x84 /* Break received */
-#define C_CM_PR_ERROR 0x85 /* Parity error */
-#define C_CM_FR_ERROR 0x86 /* Frame error */
-#define C_CM_OVR_ERROR 0x87 /* Overrun error */
-#define C_CM_RXOFL 0x88 /* RX buffer overflow */
-#define C_CM_CMDERROR 0x90 /* command error */
-#define C_CM_FATAL 0x91 /* fatal error */
-#define C_CM_HW_RESET 0x92 /* reset board */
-
-/*
- * CH_CTRL - This per port structure contains all parameters
- * that control an specific port. It can be seen as the
- * configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
- __u32 op_mode; /* operation mode */
- __u32 intr_enable; /* interrupt masking */
- __u32 sw_flow; /* SW flow control */
- __u32 flow_status; /* output flow status */
- __u32 comm_baud; /* baud rate - numerically specified */
- __u32 comm_parity; /* parity */
- __u32 comm_data_l; /* data length/stop */
- __u32 comm_flags; /* other flags */
- __u32 hw_flow; /* HW flow control */
- __u32 rs_control; /* RS-232 outputs */
- __u32 rs_status; /* RS-232 inputs */
- __u32 flow_xon; /* xon char */
- __u32 flow_xoff; /* xoff char */
- __u32 hw_overflow; /* hw overflow counter */
- __u32 sw_overflow; /* sw overflow counter */
- __u32 comm_error; /* frame/parity error counter */
- __u32 ichar;
- __u32 filler[7];
-};
-
-
-/*
- * BUF_CTRL - This per channel structure contains
- * all Tx and Rx buffer control for a given channel.
- */
-
-struct BUF_CTRL {
- __u32 flag_dma; /* buffers are in Host memory */
- __u32 tx_bufaddr; /* address of the tx buffer */
- __u32 tx_bufsize; /* tx buffer size */
- __u32 tx_threshold; /* tx low water mark */
- __u32 tx_get; /* tail index tx buf */
- __u32 tx_put; /* head index tx buf */
- __u32 rx_bufaddr; /* address of the rx buffer */
- __u32 rx_bufsize; /* rx buffer size */
- __u32 rx_threshold; /* rx high water mark */
- __u32 rx_get; /* tail index rx buf */
- __u32 rx_put; /* head index rx buf */
- __u32 filler[5]; /* filler to align structures */
-};
-
-/*
- * BOARD_CTRL - This per board structure contains all global
- * control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
- /* static info provided by the on-board CPU */
- __u32 n_channel; /* number of channels */
- __u32 fw_version; /* firmware version */
-
- /* static info provided by the driver */
- __u32 op_system; /* op_system id */
- __u32 dr_version; /* driver version */
-
- /* board control area */
- __u32 inactivity; /* inactivity control */
-
- /* host to FW commands */
- __u32 hcmd_channel; /* channel number */
- __u32 hcmd_param; /* pointer to parameters */
-
- /* FW to Host commands */
- __u32 fwcmd_channel; /* channel number */
- __u32 fwcmd_param; /* pointer to parameters */
- __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
- /* filler so the structures are aligned */
- __u32 filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE (10*MAX_CHAN)
-
-struct INT_QUEUE {
- unsigned char intr_code[QUEUE_SIZE];
- unsigned long channel[QUEUE_SIZE];
- unsigned long param[QUEUE_SIZE];
- unsigned long put;
- unsigned long get;
-};
-
-/*
- * ZFW_CTRL - This is the data structure that includes all other
- * data structures used by the Firmware.
- */
-
-struct ZFW_CTRL {
- struct BOARD_CTRL board_ctrl;
- struct CH_CTRL ch_ctrl[MAX_CHAN];
- struct BUF_CTRL buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
-#ifdef __KERNEL__
/* Per card data structure */
struct cyclades_card {
@@ -780,5 +357,4 @@ struct cyclades_port {
/***************************************************************************/
-#endif /* __KERNEL__ */
#endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/cycx_cfm.h b/include/linux/cycx_cfm.h
deleted file mode 100644
index 032d26e..0000000
--- a/include/linux/cycx_cfm.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-* cycx_cfm.h Cyclom 2X WAN Link Driver.
-* Definitions for the Cyclom 2X Firmware Module (CFM).
-*
-* Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1998/08/08 acme Initial version.
-*/
-#ifndef _CYCX_CFM_H
-#define _CYCX_CFM_H
-
-/* Defines */
-
-#define CFM_VERSION 2
-#define CFM_SIGNATURE "CFM - Cyclades CYCX Firmware Module"
-
-/* min/max */
-#define CFM_IMAGE_SIZE 0x20000 /* max size of CYCX code image file */
-#define CFM_DESCR_LEN 256 /* max length of description string */
-#define CFM_MAX_CYCX 1 /* max number of compatible adapters */
-#define CFM_LOAD_BUFSZ 0x400 /* buffer size for reset code (buffer_load) */
-
-/* Firmware Commands */
-#define GEN_POWER_ON 0x1280
-
-#define GEN_SET_SEG 0x1401 /* boot segment setting. */
-#define GEN_BOOT_DAT 0x1402 /* boot data. */
-#define GEN_START 0x1403 /* board start. */
-#define GEN_DEFPAR 0x1404 /* buffer length for boot. */
-
-/* Adapter Types */
-#define CYCX_2X 2
-/* for now only the 2X is supported, no plans to support 8X or 16X */
-#define CYCX_8X 8
-#define CYCX_16X 16
-
-#define CFID_X25_2X 5200
-
-/**
- * struct cycx_fw_info - firmware module information.
- * @codeid - firmware ID
- * @version - firmware version number
- * @adapter - compatible adapter types
- * @memsize - minimum memory size
- * @reserved - reserved
- * @startoffs - entry point offset
- * @winoffs - dual-port memory window offset
- * @codeoffs - code load offset
- * @codesize - code size
- * @dataoffs - configuration data load offset
- * @datasize - configuration data size
- */
-struct cycx_fw_info {
- unsigned short codeid;
- unsigned short version;
- unsigned short adapter[CFM_MAX_CYCX];
- unsigned long memsize;
- unsigned short reserved[2];
- unsigned short startoffs;
- unsigned short winoffs;
- unsigned short codeoffs;
- unsigned long codesize;
- unsigned short dataoffs;
- unsigned long datasize;
-};
-
-/**
- * struct cycx_firmware - CYCX firmware file structure
- * @signature - CFM file signature
- * @version - file format version
- * @checksum - info + image
- * @reserved - reserved
- * @descr - description string
- * @info - firmware module info
- * @image - code image (variable size)
- */
-struct cycx_firmware {
- char signature[80];
- unsigned short version;
- unsigned short checksum;
- unsigned short reserved[6];
- char descr[CFM_DESCR_LEN];
- struct cycx_fw_info info;
- unsigned char image[0];
-};
-
-struct cycx_fw_header {
- unsigned long reset_size;
- unsigned long data_size;
- unsigned long code_size;
-};
-#endif /* _CYCX_CFM_H */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
deleted file mode 100644
index 6bb4338..0000000
--- a/include/linux/dcbnl.h
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * Copyright (c) 2008-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Author: Lucy Liu <lucy.liu@intel.com>
- */
-
-#ifndef __LINUX_DCBNL_H__
-#define __LINUX_DCBNL_H__
-
-#include <linux/types.h>
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_MAX_TCS 8
-
-#define IEEE_8021QAZ_TSA_STRICT 0
-#define IEEE_8021QAZ_TSA_CB_SHAPER 1
-#define IEEE_8021QAZ_TSA_ETS 2
-#define IEEE_8021QAZ_TSA_VENDOR 255
-
-/* This structure contains the IEEE 802.1Qaz ETS managed object
- *
- * @willing: willing bit in ETS configuration TLV
- * @ets_cap: indicates supported capacity of ets feature
- * @cbs: credit based shaper ets algorithm supported
- * @tc_tx_bw: tc tx bandwidth indexed by traffic class
- * @tc_rx_bw: tc rx bandwidth indexed by traffic class
- * @tc_tsa: TSA Assignment table, indexed by traffic class
- * @prio_tc: priority assignment table mapping 8021Qp to traffic class
- * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
- * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
- * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
- *
- * Recommended values are used to set fields in the ETS recommendation TLV
- * with hardware offloaded LLDP.
- *
- * ----
- * TSA Assignment 8 bit identifiers
- * 0 strict priority
- * 1 credit-based shaper
- * 2 enhanced transmission selection
- * 3-254 reserved
- * 255 vendor specific
- */
-struct ieee_ets {
- __u8 willing;
- __u8 ets_cap;
- __u8 cbs;
- __u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
- __u8 tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
- __u8 tc_tsa[IEEE_8021QAZ_MAX_TCS];
- __u8 prio_tc[IEEE_8021QAZ_MAX_TCS];
- __u8 tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
- __u8 tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
- __u8 reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS
- * managed object.
- * Values are 64 bits long and specified in Kbps to enable usage over both
- * slow and very fast networks.
- *
- * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class
- */
-struct ieee_maxrate {
- __u64 tc_maxrate[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* This structure contains the IEEE 802.1Qaz PFC managed object
- *
- * @pfc_cap: Indicates the number of traffic classes on the local device
- * that may simultaneously have PFC enabled.
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @mbc: enable macsec bypass capability
- * @delay: the allowance made for a round-trip propagation delay of the
- * link in bits.
- * @requests: count of the sent pfc frames
- * @indications: count of the received pfc frames
- */
-struct ieee_pfc {
- __u8 pfc_cap;
- __u8 pfc_en;
- __u8 mbc;
- __u16 delay;
- __u64 requests[IEEE_8021QAZ_MAX_TCS];
- __u64 indications[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* CEE DCBX std supported values */
-#define CEE_DCBX_MAX_PGS 8
-#define CEE_DCBX_MAX_PRIO 8
-
-/**
- * struct cee_pg - CEE Priority-Group managed object
- *
- * @willing: willing bit in the PG tlv
- * @error: error bit in the PG tlv
- * @pg_en: enable bit of the PG feature
- * @tcs_supported: number of traffic classes supported
- * @pg_bw: bandwidth percentage for each priority group
- * @prio_pg: priority to PG mapping indexed by priority
- */
-struct cee_pg {
- __u8 willing;
- __u8 error;
- __u8 pg_en;
- __u8 tcs_supported;
- __u8 pg_bw[CEE_DCBX_MAX_PGS];
- __u8 prio_pg[CEE_DCBX_MAX_PGS];
-};
-
-/**
- * struct cee_pfc - CEE PFC managed object
- *
- * @willing: willing bit in the PFC tlv
- * @error: error bit in the PFC tlv
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @tcs_supported: number of traffic classes supported
- */
-struct cee_pfc {
- __u8 willing;
- __u8 error;
- __u8 pfc_en;
- __u8 tcs_supported;
-};
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_APP_SEL_ETHERTYPE 1
-#define IEEE_8021QAZ_APP_SEL_STREAM 2
-#define IEEE_8021QAZ_APP_SEL_DGRAM 3
-#define IEEE_8021QAZ_APP_SEL_ANY 4
-
-/* This structure contains the IEEE 802.1Qaz APP managed object. This
- * object is also used for the CEE std as well. There is no difference
- * between the objects.
- *
- * @selector: protocol identifier type
- * @protocol: protocol of type indicated
- * @priority: 3-bit unsigned integer indicating priority
- *
- * ----
- * Selector field values
- * 0 Reserved
- * 1 Ethertype
- * 2 Well known port number over TCP or SCTP
- * 3 Well known port number over UDP or DCCP
- * 4 Well known port number over TCP, SCTP, UDP, or DCCP
- * 5-7 Reserved
- */
-struct dcb_app {
- __u8 selector;
- __u8 priority;
- __u16 protocol;
-};
-
-/**
- * struct dcb_peer_app_info - APP feature information sent by the peer
- *
- * @willing: willing bit in the peer APP tlv
- * @error: error bit in the peer APP tlv
- *
- * In addition to this information the full peer APP tlv also contains
- * a table of 'app_count' APP objects defined above.
- */
-struct dcb_peer_app_info {
- __u8 willing;
- __u8 error;
-};
-
-struct dcbmsg {
- __u8 dcb_family;
- __u8 cmd;
- __u16 dcb_pad;
-};
-
-/**
- * enum dcbnl_commands - supported DCB commands
- *
- * @DCB_CMD_UNDEFINED: unspecified command to catch errors
- * @DCB_CMD_GSTATE: request the state of DCB in the device
- * @DCB_CMD_SSTATE: set the state of DCB in the device
- * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
- * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
- * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
- * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
- * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
- * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
- * @DCB_CMD_SET_ALL: apply all changes to the underlying device
- * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
- * device. Only useful when using bonding.
- * @DCB_CMD_GCAP: request the DCB capabilities of the device
- * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
- * @DCB_CMD_SNUMTCS: set the number of traffic classes
- * @DCB_CMD_GBCN: set backward congestion notification configuration
- * @DCB_CMD_SBCN: get backward congestion notification configration.
- * @DCB_CMD_GAPP: get application protocol configuration
- * @DCB_CMD_SAPP: set application protocol configuration
- * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
- * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
- * @DCB_CMD_GDCBX: get DCBX engine configuration
- * @DCB_CMD_SDCBX: set DCBX engine configuration
- * @DCB_CMD_GFEATCFG: get DCBX features flags
- * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
- * @DCB_CMD_CEE_GET: get CEE aggregated configuration
- * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
- */
-enum dcbnl_commands {
- DCB_CMD_UNDEFINED,
-
- DCB_CMD_GSTATE,
- DCB_CMD_SSTATE,
-
- DCB_CMD_PGTX_GCFG,
- DCB_CMD_PGTX_SCFG,
- DCB_CMD_PGRX_GCFG,
- DCB_CMD_PGRX_SCFG,
-
- DCB_CMD_PFC_GCFG,
- DCB_CMD_PFC_SCFG,
-
- DCB_CMD_SET_ALL,
-
- DCB_CMD_GPERM_HWADDR,
-
- DCB_CMD_GCAP,
-
- DCB_CMD_GNUMTCS,
- DCB_CMD_SNUMTCS,
-
- DCB_CMD_PFC_GSTATE,
- DCB_CMD_PFC_SSTATE,
-
- DCB_CMD_BCN_GCFG,
- DCB_CMD_BCN_SCFG,
-
- DCB_CMD_GAPP,
- DCB_CMD_SAPP,
-
- DCB_CMD_IEEE_SET,
- DCB_CMD_IEEE_GET,
-
- DCB_CMD_GDCBX,
- DCB_CMD_SDCBX,
-
- DCB_CMD_GFEATCFG,
- DCB_CMD_SFEATCFG,
-
- DCB_CMD_CEE_GET,
- DCB_CMD_IEEE_DEL,
-
- __DCB_CMD_ENUM_MAX,
- DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_attrs - DCB top-level netlink attributes
- *
- * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
- * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
- * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
- * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
- * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
- * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
- * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
- * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
- * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
- * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
- * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
- * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
- * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
- * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
- * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
- */
-enum dcbnl_attrs {
- DCB_ATTR_UNDEFINED,
-
- DCB_ATTR_IFNAME,
- DCB_ATTR_STATE,
- DCB_ATTR_PFC_STATE,
- DCB_ATTR_PFC_CFG,
- DCB_ATTR_NUM_TC,
- DCB_ATTR_PG_CFG,
- DCB_ATTR_SET_ALL,
- DCB_ATTR_PERM_HWADDR,
- DCB_ATTR_CAP,
- DCB_ATTR_NUMTCS,
- DCB_ATTR_BCN,
- DCB_ATTR_APP,
-
- /* IEEE std attributes */
- DCB_ATTR_IEEE,
-
- DCB_ATTR_DCBX,
- DCB_ATTR_FEATCFG,
-
- /* CEE nested attributes */
- DCB_ATTR_CEE,
-
- __DCB_ATTR_ENUM_MAX,
- DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
- *
- * @DCB_ATTR_IEEE_UNSPEC: unspecified
- * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
- * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
- * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
- * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
- * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
- */
-enum ieee_attrs {
- DCB_ATTR_IEEE_UNSPEC,
- DCB_ATTR_IEEE_ETS,
- DCB_ATTR_IEEE_PFC,
- DCB_ATTR_IEEE_APP_TABLE,
- DCB_ATTR_IEEE_PEER_ETS,
- DCB_ATTR_IEEE_PEER_PFC,
- DCB_ATTR_IEEE_PEER_APP,
- DCB_ATTR_IEEE_MAXRATE,
- __DCB_ATTR_IEEE_MAX
-};
-#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
-
-enum ieee_attrs_app {
- DCB_ATTR_IEEE_APP_UNSPEC,
- DCB_ATTR_IEEE_APP,
- __DCB_ATTR_IEEE_APP_MAX
-};
-#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
-
-/**
- * enum cee_attrs - CEE DCBX get attributes.
- *
- * @DCB_ATTR_CEE_UNSPEC: unspecified
- * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
- * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
- * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
- * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
- * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
- * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
- * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
- *
- * An aggregated collection of the cee std negotiated parameters.
- */
-enum cee_attrs {
- DCB_ATTR_CEE_UNSPEC,
- DCB_ATTR_CEE_PEER_PG,
- DCB_ATTR_CEE_PEER_PFC,
- DCB_ATTR_CEE_PEER_APP_TABLE,
- DCB_ATTR_CEE_TX_PG,
- DCB_ATTR_CEE_RX_PG,
- DCB_ATTR_CEE_PFC,
- DCB_ATTR_CEE_APP_TABLE,
- DCB_ATTR_CEE_FEAT,
- __DCB_ATTR_CEE_MAX
-};
-#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)
-
-enum peer_app_attr {
- DCB_ATTR_CEE_PEER_APP_UNSPEC,
- DCB_ATTR_CEE_PEER_APP_INFO,
- DCB_ATTR_CEE_PEER_APP,
- __DCB_ATTR_CEE_PEER_APP_MAX
-};
-#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)
-
-enum cee_attrs_app {
- DCB_ATTR_CEE_APP_UNSPEC,
- DCB_ATTR_CEE_APP,
- __DCB_ATTR_CEE_APP_MAX
-};
-#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)
-
-/**
- * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
- *
- * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
- * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
- * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
- * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
- * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
- * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
- * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
- * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
- * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
- * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
- *
- */
-enum dcbnl_pfc_up_attrs {
- DCB_PFC_UP_ATTR_UNDEFINED,
-
- DCB_PFC_UP_ATTR_0,
- DCB_PFC_UP_ATTR_1,
- DCB_PFC_UP_ATTR_2,
- DCB_PFC_UP_ATTR_3,
- DCB_PFC_UP_ATTR_4,
- DCB_PFC_UP_ATTR_5,
- DCB_PFC_UP_ATTR_6,
- DCB_PFC_UP_ATTR_7,
- DCB_PFC_UP_ATTR_ALL,
-
- __DCB_PFC_UP_ATTR_ENUM_MAX,
- DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_pg_attrs - DCB Priority Group attributes
- *
- * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
- * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
- *
- */
-enum dcbnl_pg_attrs {
- DCB_PG_ATTR_UNDEFINED,
-
- DCB_PG_ATTR_TC_0,
- DCB_PG_ATTR_TC_1,
- DCB_PG_ATTR_TC_2,
- DCB_PG_ATTR_TC_3,
- DCB_PG_ATTR_TC_4,
- DCB_PG_ATTR_TC_5,
- DCB_PG_ATTR_TC_6,
- DCB_PG_ATTR_TC_7,
- DCB_PG_ATTR_TC_MAX,
- DCB_PG_ATTR_TC_ALL,
-
- DCB_PG_ATTR_BW_ID_0,
- DCB_PG_ATTR_BW_ID_1,
- DCB_PG_ATTR_BW_ID_2,
- DCB_PG_ATTR_BW_ID_3,
- DCB_PG_ATTR_BW_ID_4,
- DCB_PG_ATTR_BW_ID_5,
- DCB_PG_ATTR_BW_ID_6,
- DCB_PG_ATTR_BW_ID_7,
- DCB_PG_ATTR_BW_ID_MAX,
- DCB_PG_ATTR_BW_ID_ALL,
-
- __DCB_PG_ATTR_ENUM_MAX,
- DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_tc_attrs - DCB Traffic Class attributes
- *
- * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
- * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
- * Valid values are: 0-7
- * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
- * Some devices may not support changing the
- * user priority map of a TC.
- * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
- * 0 - none
- * 1 - group strict
- * 2 - link strict
- * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
- * not configured to use link strict priority,
- * this is the percentage of bandwidth of the
- * priority group this traffic class belongs to
- * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
- *
- */
-enum dcbnl_tc_attrs {
- DCB_TC_ATTR_PARAM_UNDEFINED,
-
- DCB_TC_ATTR_PARAM_PGID,
- DCB_TC_ATTR_PARAM_UP_MAPPING,
- DCB_TC_ATTR_PARAM_STRICT_PRIO,
- DCB_TC_ATTR_PARAM_BW_PCT,
- DCB_TC_ATTR_PARAM_ALL,
-
- __DCB_TC_ATTR_PARAM_ENUM_MAX,
- DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_cap_attrs - DCB Capability attributes
- *
- * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
- * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
- * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
- * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
- * traffic class mapping
- * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
- * number of traffic classes the device
- * can be configured to use for Priority Groups
- * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
- * number of traffic classes the device can be
- * configured to use for Priority Flow Control
- * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
- * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
- * Notification
- * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
- *
- */
-enum dcbnl_cap_attrs {
- DCB_CAP_ATTR_UNDEFINED,
- DCB_CAP_ATTR_ALL,
- DCB_CAP_ATTR_PG,
- DCB_CAP_ATTR_PFC,
- DCB_CAP_ATTR_UP2TC,
- DCB_CAP_ATTR_PG_TCS,
- DCB_CAP_ATTR_PFC_TCS,
- DCB_CAP_ATTR_GSP,
- DCB_CAP_ATTR_BCN,
- DCB_CAP_ATTR_DCBX,
-
- __DCB_CAP_ATTR_ENUM_MAX,
- DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * DCBX capability flags
- *
- * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
- * 'set' routines are used to configure the device with
- * the negotiated parameters
- *
- * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
- * by another entity
- * 'get' routines are used to retrieve the
- * negotiated parameters
- * 'set' routines can be used to set the initial
- * negotiation configuration
- *
- * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
- * supports the CEE protocol flavor
- *
- * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
- * supports the IEEE protocol flavor
- *
- * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
- * supports static configuration (i.e no actual
- * negotiation is performed negotiated parameters equal
- * the initial configuration)
- *
- */
-#define DCB_CAP_DCBX_HOST 0x01
-#define DCB_CAP_DCBX_LLD_MANAGED 0x02
-#define DCB_CAP_DCBX_VER_CEE 0x04
-#define DCB_CAP_DCBX_VER_IEEE 0x08
-#define DCB_CAP_DCBX_STATIC 0x10
-
-/**
- * enum dcbnl_numtcs_attrs - number of traffic classes
- *
- * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
- * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
- * priority groups
- * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
- * support priority flow control
- */
-enum dcbnl_numtcs_attrs {
- DCB_NUMTCS_ATTR_UNDEFINED,
- DCB_NUMTCS_ATTR_ALL,
- DCB_NUMTCS_ATTR_PG,
- DCB_NUMTCS_ATTR_PFC,
-
- __DCB_NUMTCS_ATTR_ENUM_MAX,
- DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
-};
-
-enum dcbnl_bcn_attrs{
- DCB_BCN_ATTR_UNDEFINED = 0,
-
- DCB_BCN_ATTR_RP_0,
- DCB_BCN_ATTR_RP_1,
- DCB_BCN_ATTR_RP_2,
- DCB_BCN_ATTR_RP_3,
- DCB_BCN_ATTR_RP_4,
- DCB_BCN_ATTR_RP_5,
- DCB_BCN_ATTR_RP_6,
- DCB_BCN_ATTR_RP_7,
- DCB_BCN_ATTR_RP_ALL,
-
- DCB_BCN_ATTR_BCNA_0,
- DCB_BCN_ATTR_BCNA_1,
- DCB_BCN_ATTR_ALPHA,
- DCB_BCN_ATTR_BETA,
- DCB_BCN_ATTR_GD,
- DCB_BCN_ATTR_GI,
- DCB_BCN_ATTR_TMAX,
- DCB_BCN_ATTR_TD,
- DCB_BCN_ATTR_RMIN,
- DCB_BCN_ATTR_W,
- DCB_BCN_ATTR_RD,
- DCB_BCN_ATTR_RU,
- DCB_BCN_ATTR_WRTT,
- DCB_BCN_ATTR_RI,
- DCB_BCN_ATTR_C,
- DCB_BCN_ATTR_ALL,
-
- __DCB_BCN_ATTR_ENUM_MAX,
- DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcb_general_attr_values - general DCB attribute values
- *
- * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
- *
- */
-enum dcb_general_attr_values {
- DCB_ATTR_VALUE_UNDEFINED = 0xff
-};
-
-#define DCB_APP_IDTYPE_ETHTYPE 0x00
-#define DCB_APP_IDTYPE_PORTNUM 0x01
-enum dcbnl_app_attrs {
- DCB_APP_ATTR_UNDEFINED,
-
- DCB_APP_ATTR_IDTYPE,
- DCB_APP_ATTR_ID,
- DCB_APP_ATTR_PRIORITY,
-
- __DCB_APP_ATTR_ENUM_MAX,
- DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_featcfg_attrs - features conifiguration flags
- *
- * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
- * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
- * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
- * flow control
- * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
- *
- */
-#define DCB_FEATCFG_ERROR 0x01 /* error in feature resolution */
-#define DCB_FEATCFG_ENABLE 0x02 /* enable feature */
-#define DCB_FEATCFG_WILLING 0x04 /* feature is willing */
-#define DCB_FEATCFG_ADVERTISE 0x08 /* advertise feature */
-enum dcbnl_featcfg_attrs {
- DCB_FEATCFG_ATTR_UNDEFINED,
- DCB_FEATCFG_ATTR_ALL,
- DCB_FEATCFG_ATTR_PG,
- DCB_FEATCFG_ATTR_PFC,
- DCB_FEATCFG_ATTR_APP,
-
- __DCB_FEATCFG_ATTR_ENUM_MAX,
- DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
-};
-
-#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index d16294e..439ff69 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -1,239 +1,6 @@
#ifndef _LINUX_DCCP_H
#define _LINUX_DCCP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
- __be16 dccph_sport,
- dccph_dport;
- __u8 dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 dccph_cscov:4,
- dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 dccph_ccval:4,
- dccph_cscov:4;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __sum16 dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 dccph_x:1,
- dccph_type:4,
- dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 dccph_reserved:3,
- dccph_type:4,
- dccph_x:1;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __u8 dccph_seq2;
- __be16 dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
- __be32 dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
- __be32 dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
- __be16 dccph_reserved1;
- __be16 dccph_ack_nr_high;
- __be32 dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
- struct dccp_hdr_ack_bits dccph_resp_ack;
- __be32 dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
- struct dccp_hdr_ack_bits dccph_reset_ack;
- __u8 dccph_reset_code,
- dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
- DCCP_PKT_REQUEST = 0,
- DCCP_PKT_RESPONSE,
- DCCP_PKT_DATA,
- DCCP_PKT_ACK,
- DCCP_PKT_DATAACK,
- DCCP_PKT_CLOSEREQ,
- DCCP_PKT_CLOSE,
- DCCP_PKT_RESET,
- DCCP_PKT_SYNC,
- DCCP_PKT_SYNCACK,
- DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
- if (type == DCCP_PKT_DATA)
- return 0;
- if (type == DCCP_PKT_DATAACK ||
- type == DCCP_PKT_ACK ||
- type == DCCP_PKT_SYNC ||
- type == DCCP_PKT_SYNCACK ||
- type == DCCP_PKT_CLOSE ||
- type == DCCP_PKT_CLOSEREQ)
- return sizeof(struct dccp_hdr_ack_bits);
- if (type == DCCP_PKT_REQUEST)
- return sizeof(struct dccp_hdr_request);
- if (type == DCCP_PKT_RESPONSE)
- return sizeof(struct dccp_hdr_response);
- return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
- DCCP_RESET_CODE_UNSPECIFIED = 0,
- DCCP_RESET_CODE_CLOSED,
- DCCP_RESET_CODE_ABORTED,
- DCCP_RESET_CODE_NO_CONNECTION,
- DCCP_RESET_CODE_PACKET_ERROR,
- DCCP_RESET_CODE_OPTION_ERROR,
- DCCP_RESET_CODE_MANDATORY_ERROR,
- DCCP_RESET_CODE_CONNECTION_REFUSED,
- DCCP_RESET_CODE_BAD_SERVICE_CODE,
- DCCP_RESET_CODE_TOO_BUSY,
- DCCP_RESET_CODE_BAD_INIT_COOKIE,
- DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
- DCCP_MAX_RESET_CODES /* Leave at the end! */
-};
-
-/* DCCP options */
-enum {
- DCCPO_PADDING = 0,
- DCCPO_MANDATORY = 1,
- DCCPO_MIN_RESERVED = 3,
- DCCPO_MAX_RESERVED = 31,
- DCCPO_CHANGE_L = 32,
- DCCPO_CONFIRM_L = 33,
- DCCPO_CHANGE_R = 34,
- DCCPO_CONFIRM_R = 35,
- DCCPO_NDP_COUNT = 37,
- DCCPO_ACK_VECTOR_0 = 38,
- DCCPO_ACK_VECTOR_1 = 39,
- DCCPO_TIMESTAMP = 41,
- DCCPO_TIMESTAMP_ECHO = 42,
- DCCPO_ELAPSED_TIME = 43,
- DCCPO_MAX = 45,
- DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */
- DCCPO_MAX_RX_CCID_SPECIFIC = 191,
- DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */
- DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN 253
-
-/* DCCP CCIDS */
-enum {
- DCCPC_CCID2 = 2,
- DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
- DCCPF_RESERVED = 0,
- DCCPF_CCID = 1,
- DCCPF_SHORT_SEQNOS = 2,
- DCCPF_SEQUENCE_WINDOW = 3,
- DCCPF_ECN_INCAPABLE = 4,
- DCCPF_ACK_RATIO = 5,
- DCCPF_SEND_ACK_VECTOR = 6,
- DCCPF_SEND_NDP_COUNT = 7,
- DCCPF_MIN_CSUM_COVER = 8,
- DCCPF_DATA_CHECKSUM = 9,
- /* 10-127 reserved */
- DCCPF_MIN_CCID_SPECIFIC = 128,
- DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */
- DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
- DCCP_SCM_PRIORITY = 1,
- DCCP_SCM_QPOLICY_MAX = 0xFFFF,
- /* ^-- Up to here reserved exclusively for qpolicy parameters */
- DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
- DCCPQ_POLICY_SIMPLE,
- DCCPQ_POLICY_PRIO,
- DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE 2
-#define DCCP_SOCKOPT_CHANGE_L 3
-#define DCCP_SOCKOPT_CHANGE_R 4
-#define DCCP_SOCKOPT_GET_CUR_MPS 5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6
-#define DCCP_SOCKOPT_SEND_CSCOV 10
-#define DCCP_SOCKOPT_RECV_CSCOV 11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12
-#define DCCP_SOCKOPT_CCID 13
-#define DCCP_SOCKOPT_TX_CCID 14
-#define DCCP_SOCKOPT_RX_CCID 15
-#define DCCP_SOCKOPT_QPOLICY_ID 16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17
-#define DCCP_SOCKOPT_CCID_RX_INFO 128
-#define DCCP_SOCKOPT_CCID_TX_INFO 192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN 32
-
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/interrupt.h>
@@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy {
#include <net/inet_sock.h>
#include <net/inet_timewait_sock.h>
#include <net/tcp_states.h>
+#include <uapi/linux/dccp.h>
enum dccp_state {
DCCP_OPEN = TCP_ESTABLISHED,
@@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk)
extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 5201524..1d47dcc 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -10,68 +10,11 @@
**
*******************************************************************************
******************************************************************************/
-
#ifndef __DLM_DOT_H__
#define __DLM_DOT_H__
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
-
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block. For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock. DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution. Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED 0x01
-#define DLM_SBF_VALNOTVALID 0x02
-#define DLM_SBF_ALTMODE 0x04
+#include <uapi/linux/dlm.h>
-struct dlm_lksb {
- int sb_status;
- __u32 sb_lkid;
- char sb_flags;
- char * sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_TIMEWARN 0x00000002
-#define DLM_LSFL_FS 0x00000004
-#define DLM_LSFL_NEWEXCL 0x00000008
-
-#ifdef __KERNEL__
struct dlm_slot {
int nodeid; /* 1 to MAX_INT */
@@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace,
struct dlm_lksb *lksb,
void *astarg);
-#endif /* __KERNEL__ */
-
#endif /* __DLM_DOT_H__ */
-
diff --git a/include/linux/dlm_device.h b/include/linux/dlm_device.h
deleted file mode 100644
index 3060783..0000000
--- a/include/linux/dlm_device.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
-** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
-**
-** This copyrighted material is made available to anyone wishing to use,
-** modify, copy, or redistribute it subject to the terms and conditions
-** of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef _LINUX_DLM_DEVICE_H
-#define _LINUX_DLM_DEVICE_H
-
-/* This is the device interface for dlm, most users will use a library
- * interface.
- */
-
-#include <linux/dlm.h>
-#include <linux/types.h>
-
-#define DLM_USER_LVB_LEN 32
-
-/* Version of the device interface */
-#define DLM_DEVICE_VERSION_MAJOR 6
-#define DLM_DEVICE_VERSION_MINOR 0
-#define DLM_DEVICE_VERSION_PATCH 1
-
-/* struct passed to the lock write */
-struct dlm_lock_params {
- __u8 mode;
- __u8 namelen;
- __u16 unused;
- __u32 flags;
- __u32 lkid;
- __u32 parent;
- __u64 xid;
- __u64 timeout;
- void __user *castparam;
- void __user *castaddr;
- void __user *bastparam;
- void __user *bastaddr;
- struct dlm_lksb __user *lksb;
- char lvb[DLM_USER_LVB_LEN];
- char name[0];
-};
-
-struct dlm_lspace_params {
- __u32 flags;
- __u32 minor;
- char name[0];
-};
-
-struct dlm_purge_params {
- __u32 nodeid;
- __u32 pid;
-};
-
-struct dlm_write_request {
- __u32 version[3];
- __u8 cmd;
- __u8 is64bit;
- __u8 unused[2];
-
- union {
- struct dlm_lock_params lock;
- struct dlm_lspace_params lspace;
- struct dlm_purge_params purge;
- } i;
-};
-
-struct dlm_device_version {
- __u32 version[3];
-};
-
-/* struct read from the "device" fd,
- consists mainly of userspace pointers for the library to use */
-
-struct dlm_lock_result {
- __u32 version[3];
- __u32 length;
- void __user * user_astaddr;
- void __user * user_astparam;
- struct dlm_lksb __user * user_lksb;
- struct dlm_lksb lksb;
- __u8 bast_mode;
- __u8 unused[3];
- /* Offsets may be zero if no data is present */
- __u32 lvb_offset;
-};
-
-/* Commands passed to the device */
-#define DLM_USER_LOCK 1
-#define DLM_USER_UNLOCK 2
-#define DLM_USER_QUERY 3
-#define DLM_USER_CREATE_LOCKSPACE 4
-#define DLM_USER_REMOVE_LOCKSPACE 5
-#define DLM_USER_PURGE 6
-#define DLM_USER_DEADLOCK 7
-
-/* Lockspace flags */
-#define DLM_USER_LSFLG_AUTOFREE 1
-#define DLM_USER_LSFLG_FORCEFREE 2
-
-#endif
-
diff --git a/include/linux/dlm_netlink.h b/include/linux/dlm_netlink.h
deleted file mode 100644
index 647c8ef..0000000
--- a/include/linux/dlm_netlink.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2007 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef _DLM_NETLINK_H
-#define _DLM_NETLINK_H
-
-#include <linux/types.h>
-
-enum {
- DLM_STATUS_WAITING = 1,
- DLM_STATUS_GRANTED = 2,
- DLM_STATUS_CONVERT = 3,
-};
-
-#define DLM_LOCK_DATA_VERSION 1
-
-struct dlm_lock_data {
- __u16 version;
- __u32 lockspace_id;
- int nodeid;
- int ownpid;
- __u32 id;
- __u32 remid;
- __u64 xid;
- __s8 status;
- __s8 grmode;
- __s8 rqmode;
- unsigned long timestamp;
- int resource_namelen;
- char resource_name[DLM_RESNAME_MAXLEN];
-};
-
-enum {
- DLM_CMD_UNSPEC = 0,
- DLM_CMD_HELLO, /* user->kernel */
- DLM_CMD_TIMEOUT, /* kernel->user */
- __DLM_CMD_MAX,
-};
-
-#define DLM_CMD_MAX (__DLM_CMD_MAX - 1)
-
-enum {
- DLM_TYPE_UNSPEC = 0,
- DLM_TYPE_LOCK,
- __DLM_TYPE_MAX,
-};
-
-#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1)
-
-#define DLM_GENL_VERSION 0x1
-#define DLM_GENL_NAME "DLM"
-
-#endif /* _DLM_NETLINK_H */
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 3b1cc1b..95ad387 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -5,50 +5,15 @@
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License v.2.
*/
-
#ifndef __DLM_PLOCK_DOT_H__
#define __DLM_PLOCK_DOT_H__
-#include <linux/types.h>
-
-#define DLM_PLOCK_MISC_NAME "dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR 1
-#define DLM_PLOCK_VERSION_MINOR 2
-#define DLM_PLOCK_VERSION_PATCH 0
-
-enum {
- DLM_PLOCK_OP_LOCK = 1,
- DLM_PLOCK_OP_UNLOCK,
- DLM_PLOCK_OP_GET,
-};
+#include <uapi/linux/dlm_plock.h>
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
- __u32 version[3];
- __u8 optype;
- __u8 ex;
- __u8 wait;
- __u8 flags;
- __u32 pid;
- __s32 nodeid;
- __s32 rv;
- __u32 fsid;
- __u64 number;
- __u64 start;
- __u64 end;
- __u64 owner;
-};
-
-#ifdef __KERNEL__
int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
int cmd, struct file_lock *fl);
int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
struct file_lock *fl);
int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
struct file_lock *fl);
-#endif /* __KERNEL__ */
-
#endif
-
diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h
deleted file mode 100644
index 47bf08d..0000000
--- a/include/linux/dlmconstants.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
-** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
-**
-** This copyrighted material is made available to anyone wishing to use,
-** modify, copy, or redistribute it subject to the terms and conditions
-** of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef __DLMCONSTANTS_DOT_H__
-#define __DLMCONSTANTS_DOT_H__
-
-/*
- * Constants used by DLM interface.
- */
-
-#define DLM_LOCKSPACE_LEN 64
-#define DLM_RESNAME_MAXLEN 64
-
-
-/*
- * Lock Modes
- */
-
-#define DLM_LOCK_IV (-1) /* invalid */
-#define DLM_LOCK_NL 0 /* null */
-#define DLM_LOCK_CR 1 /* concurrent read */
-#define DLM_LOCK_CW 2 /* concurrent write */
-#define DLM_LOCK_PR 3 /* protected read */
-#define DLM_LOCK_PW 4 /* protected write */
-#define DLM_LOCK_EX 5 /* exclusive */
-
-
-/*
- * Flags to dlm_lock
- *
- * DLM_LKF_NOQUEUE
- *
- * Do not queue the lock request on the wait queue if it cannot be granted
- * immediately. If the lock cannot be granted because of this flag, DLM will
- * either return -EAGAIN from the dlm_lock call or will return 0 from
- * dlm_lock and -EAGAIN in the lock status block when the AST is executed.
- *
- * DLM_LKF_CANCEL
- *
- * Used to cancel a pending lock request or conversion. A converting lock is
- * returned to its previously granted mode.
- *
- * DLM_LKF_CONVERT
- *
- * Indicates a lock conversion request. For conversions the name and namelen
- * are ignored and the lock ID in the LKSB is used to identify the lock.
- *
- * DLM_LKF_VALBLK
- *
- * Requests DLM to return the current contents of the lock value block in the
- * lock status block. When this flag is set in a lock conversion from PW or EX
- * modes, DLM assigns the value specified in the lock status block to the lock
- * value block of the lock resource. The LVB is a DLM_LVB_LEN size array
- * containing application-specific information.
- *
- * DLM_LKF_QUECVT
- *
- * Force a conversion request to be queued, even if it is compatible with
- * the granted modes of other locks on the same resource.
- *
- * DLM_LKF_IVVALBLK
- *
- * Invalidate the lock value block.
- *
- * DLM_LKF_CONVDEADLK
- *
- * Allows the dlm to resolve conversion deadlocks internally by demoting the
- * granted mode of a converting lock to NL. The DLM_SBF_DEMOTED flag is
- * returned for a conversion that's been effected by this.
- *
- * DLM_LKF_PERSISTENT
- *
- * Only relevant to locks originating in userspace. A persistent lock will not
- * be removed if the process holding the lock exits.
- *
- * DLM_LKF_NODLCKWT
- *
- * Do not cancel the lock if it gets into conversion deadlock.
- * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN.
- *
- * DLM_LKF_NODLCKBLK
- *
- * net yet implemented
- *
- * DLM_LKF_EXPEDITE
- *
- * Used only with new requests for NL mode locks. Tells the lock manager
- * to grant the lock, ignoring other locks in convert and wait queues.
- *
- * DLM_LKF_NOQUEUEBAST
- *
- * Send blocking AST's before returning -EAGAIN to the caller. It is only
- * used along with the NOQUEUE flag. Blocking AST's are not sent for failed
- * NOQUEUE requests otherwise.
- *
- * DLM_LKF_HEADQUE
- *
- * Add a lock to the head of the convert or wait queue rather than the tail.
- *
- * DLM_LKF_NOORDER
- *
- * Disregard the standard grant order rules and grant a lock as soon as it
- * is compatible with other granted locks.
- *
- * DLM_LKF_ORPHAN
- *
- * not yet implemented
- *
- * DLM_LKF_ALTPR
- *
- * If the requested mode cannot be granted immediately, try to grant the lock
- * in PR mode instead. If this alternate mode is granted instead of the
- * requested mode, DLM_SBF_ALTMODE is returned in the lksb.
- *
- * DLM_LKF_ALTCW
- *
- * The same as ALTPR, but the alternate mode is CW.
- *
- * DLM_LKF_FORCEUNLOCK
- *
- * Unlock the lock even if it is converting or waiting or has sublocks.
- * Only really for use by the userland device.c code.
- *
- */
-
-#define DLM_LKF_NOQUEUE 0x00000001
-#define DLM_LKF_CANCEL 0x00000002
-#define DLM_LKF_CONVERT 0x00000004
-#define DLM_LKF_VALBLK 0x00000008
-#define DLM_LKF_QUECVT 0x00000010
-#define DLM_LKF_IVVALBLK 0x00000020
-#define DLM_LKF_CONVDEADLK 0x00000040
-#define DLM_LKF_PERSISTENT 0x00000080
-#define DLM_LKF_NODLCKWT 0x00000100
-#define DLM_LKF_NODLCKBLK 0x00000200
-#define DLM_LKF_EXPEDITE 0x00000400
-#define DLM_LKF_NOQUEUEBAST 0x00000800
-#define DLM_LKF_HEADQUE 0x00001000
-#define DLM_LKF_NOORDER 0x00002000
-#define DLM_LKF_ORPHAN 0x00004000
-#define DLM_LKF_ALTPR 0x00008000
-#define DLM_LKF_ALTCW 0x00010000
-#define DLM_LKF_FORCEUNLOCK 0x00020000
-#define DLM_LKF_TIMEOUT 0x00040000
-
-/*
- * Some return codes that are not in errno.h
- */
-
-#define DLM_ECANCEL 0x10001
-#define DLM_EUNLOCK 0x10002
-
-#endif /* __DLMCONSTANTS_DOT_H__ */
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
deleted file mode 100644
index 91e3a36..0000000
--- a/include/linux/dm-ioctl.h
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
- * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef _LINUX_DM_IOCTL_V4_H
-#define _LINUX_DM_IOCTL_V4_H
-
-#include <linux/types.h>
-
-#define DM_DIR "mapper" /* Slashes not supported */
-#define DM_CONTROL_NODE "control"
-#define DM_MAX_TYPE_NAME 16
-#define DM_NAME_LEN 128
-#define DM_UUID_LEN 129
-
-/*
- * A traditional ioctl interface for the device mapper.
- *
- * Each device can have two tables associated with it, an
- * 'active' table which is the one currently used by io passing
- * through the device, and an 'inactive' one which is a table
- * that is being prepared as a replacement for the 'active' one.
- *
- * DM_VERSION:
- * Just get the version information for the ioctl interface.
- *
- * DM_REMOVE_ALL:
- * Remove all dm devices, destroy all tables. Only really used
- * for debug.
- *
- * DM_LIST_DEVICES:
- * Get a list of all the dm device names.
- *
- * DM_DEV_CREATE:
- * Create a new device, neither the 'active' or 'inactive' table
- * slots will be filled. The device will be in suspended state
- * after creation, however any io to the device will get errored
- * since it will be out-of-bounds.
- *
- * DM_DEV_REMOVE:
- * Remove a device, destroy any tables.
- *
- * DM_DEV_RENAME:
- * Rename a device or set its uuid if none was previously supplied.
- *
- * DM_SUSPEND:
- * This performs both suspend and resume, depending which flag is
- * passed in.
- * Suspend: This command will not return until all pending io to
- * the device has completed. Further io will be deferred until
- * the device is resumed.
- * Resume: It is no longer an error to issue this command on an
- * unsuspended device. If a table is present in the 'inactive'
- * slot, it will be moved to the active slot, then the old table
- * from the active slot will be _destroyed_. Finally the device
- * is resumed.
- *
- * DM_DEV_STATUS:
- * Retrieves the status for the table in the 'active' slot.
- *
- * DM_DEV_WAIT:
- * Wait for a significant event to occur to the device. This
- * could either be caused by an event triggered by one of the
- * targets of the table in the 'active' slot, or a table change.
- *
- * DM_TABLE_LOAD:
- * Load a table into the 'inactive' slot for the device. The
- * device does _not_ need to be suspended prior to this command.
- *
- * DM_TABLE_CLEAR:
- * Destroy any table in the 'inactive' slot (ie. abort).
- *
- * DM_TABLE_DEPS:
- * Return a set of device dependencies for the 'active' table.
- *
- * DM_TABLE_STATUS:
- * Return the targets status for the 'active' table.
- *
- * DM_TARGET_MSG:
- * Pass a message string to the target at a specific offset of a device.
- *
- * DM_DEV_SET_GEOMETRY:
- * Set the geometry of a device by passing in a string in this format:
- *
- * "cylinders heads sectors_per_track start_sector"
- *
- * Beware that CHS geometry is nearly obsolete and only provided
- * for compatibility with dm devices that can be booted by a PC
- * BIOS. See struct hd_geometry for range limits. Also note that
- * the geometry is erased if the device size changes.
- */
-
-/*
- * All ioctl arguments consist of a single chunk of memory, with
- * this structure at the start. If a uuid is specified any
- * lookup (eg. for a DM_INFO) will be done on that, *not* the
- * name.
- */
-struct dm_ioctl {
- /*
- * The version number is made up of three parts:
- * major - no backward or forward compatibility,
- * minor - only backwards compatible,
- * patch - both backwards and forwards compatible.
- *
- * All clients of the ioctl interface should fill in the
- * version number of the interface that they were
- * compiled with.
- *
- * All recognised ioctl commands (ie. those that don't
- * return -ENOTTY) fill out this field, even if the
- * command failed.
- */
- __u32 version[3]; /* in/out */
- __u32 data_size; /* total size of data passed in
- * including this struct */
-
- __u32 data_start; /* offset to start of data
- * relative to start of this struct */
-
- __u32 target_count; /* in/out */
- __s32 open_count; /* out */
- __u32 flags; /* in/out */
-
- /*
- * event_nr holds either the event number (input and output) or the
- * udev cookie value (input only).
- * The DM_DEV_WAIT ioctl takes an event number as input.
- * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
- * use the field as a cookie to return in the DM_COOKIE
- * variable with the uevents they issue.
- * For output, the ioctls return the event number, not the cookie.
- */
- __u32 event_nr; /* in/out */
- __u32 padding;
-
- __u64 dev; /* in/out */
-
- char name[DM_NAME_LEN]; /* device name */
- char uuid[DM_UUID_LEN]; /* unique identifier for
- * the block device */
- char data[7]; /* padding or data */
-};
-
-/*
- * Used to specify tables. These structures appear after the
- * dm_ioctl.
- */
-struct dm_target_spec {
- __u64 sector_start;
- __u64 length;
- __s32 status; /* used when reading from kernel only */
-
- /*
- * Location of the next dm_target_spec.
- * - When specifying targets on a DM_TABLE_LOAD command, this value is
- * the number of bytes from the start of the "current" dm_target_spec
- * to the start of the "next" dm_target_spec.
- * - When retrieving targets on a DM_TABLE_STATUS command, this value
- * is the number of bytes from the start of the first dm_target_spec
- * (that follows the dm_ioctl struct) to the start of the "next"
- * dm_target_spec.
- */
- __u32 next;
-
- char target_type[DM_MAX_TYPE_NAME];
-
- /*
- * Parameter string starts immediately after this object.
- * Be careful to add padding after string to ensure correct
- * alignment of subsequent dm_target_spec.
- */
-};
-
-/*
- * Used to retrieve the target dependencies.
- */
-struct dm_target_deps {
- __u32 count; /* Array size */
- __u32 padding; /* unused */
- __u64 dev[0]; /* out */
-};
-
-/*
- * Used to get a list of all dm devices.
- */
-struct dm_name_list {
- __u64 dev;
- __u32 next; /* offset to the next record from
- the _start_ of this */
- char name[0];
-};
-
-/*
- * Used to retrieve the target versions
- */
-struct dm_target_versions {
- __u32 next;
- __u32 version[3];
-
- char name[0];
-};
-
-/*
- * Used to pass message to a target
- */
-struct dm_target_msg {
- __u64 sector; /* Device sector */
-
- char message[0];
-};
-
-/*
- * If you change this make sure you make the corresponding change
- * to dm-ioctl.c:lookup_ioctl()
- */
-enum {
- /* Top level cmds */
- DM_VERSION_CMD = 0,
- DM_REMOVE_ALL_CMD,
- DM_LIST_DEVICES_CMD,
-
- /* device level cmds */
- DM_DEV_CREATE_CMD,
- DM_DEV_REMOVE_CMD,
- DM_DEV_RENAME_CMD,
- DM_DEV_SUSPEND_CMD,
- DM_DEV_STATUS_CMD,
- DM_DEV_WAIT_CMD,
-
- /* Table level cmds */
- DM_TABLE_LOAD_CMD,
- DM_TABLE_CLEAR_CMD,
- DM_TABLE_DEPS_CMD,
- DM_TABLE_STATUS_CMD,
-
- /* Added later */
- DM_LIST_VERSIONS_CMD,
- DM_TARGET_MSG_CMD,
- DM_DEV_SET_GEOMETRY_CMD
-};
-
-#define DM_IOCTL 0xfd
-
-#define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
-#define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
-#define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
-
-#define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
-#define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
-#define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
-#define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
-#define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
-#define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
-
-#define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
-#define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
-#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
-#define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
-
-#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
-
-#define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
-#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
-
-#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 23
-#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2012-07-25)"
-
-/* Status bits */
-#define DM_READONLY_FLAG (1 << 0) /* In/Out */
-#define DM_SUSPEND_FLAG (1 << 1) /* In/Out */
-#define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */
-
-/*
- * Flag passed into ioctl STATUS command to get table information
- * rather than current status.
- */
-#define DM_STATUS_TABLE_FLAG (1 << 4) /* In */
-
-/*
- * Flags that indicate whether a table is present in either of
- * the two table slots that a device has.
- */
-#define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */
-#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
-
-/*
- * Indicates that the buffer passed in wasn't big enough for the
- * results.
- */
-#define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */
-
-/*
- * This flag is now ignored.
- */
-#define DM_SKIP_BDGET_FLAG (1 << 9) /* In */
-
-/*
- * Set this to avoid attempting to freeze any filesystem when suspending.
- */
-#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
-
-/*
- * Set this to suspend without flushing queued ios.
- * Also disables flushing uncommitted changes in the thin target before
- * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT.
- */
-#define DM_NOFLUSH_FLAG (1 << 11) /* In */
-
-/*
- * If set, any table information returned will relate to the inactive
- * table instead of the live one. Always check DM_INACTIVE_PRESENT_FLAG
- * is set before using the data returned.
- */
-#define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */
-
-/*
- * If set, a uevent was generated for which the caller may need to wait.
- */
-#define DM_UEVENT_GENERATED_FLAG (1 << 13) /* Out */
-
-/*
- * If set, rename changes the uuid not the name. Only permitted
- * if no uuid was previously supplied: an existing uuid cannot be changed.
- */
-#define DM_UUID_FLAG (1 << 14) /* In */
-
-/*
- * If set, all buffers are wiped after use. Use when sending
- * or requesting sensitive data such as an encryption key.
- */
-#define DM_SECURE_DATA_FLAG (1 << 15) /* In */
-
-#endif /* _LINUX_DM_IOCTL_H */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
deleted file mode 100644
index 0678c2a..0000000
--- a/include/linux/dm-log-userspace.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Red Hat, Inc.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef __DM_LOG_USERSPACE_H__
-#define __DM_LOG_USERSPACE_H__
-
-#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
-
-/*
- * The device-mapper userspace log module consists of a kernel component and
- * a user-space component. The kernel component implements the API defined
- * in dm-dirty-log.h. Its purpose is simply to pass the parameters and
- * return values of those API functions between kernel and user-space.
- *
- * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
- * These request types represent the different functions in the device-mapper
- * dirty log API. Each of these is described in more detail below.
- *
- * The user-space program must listen for requests from the kernel (representing
- * the various API functions) and process them.
- *
- * User-space begins by setting up the communication link (error checking
- * removed for clarity):
- * fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
- * addr.nl_family = AF_NETLINK;
- * addr.nl_groups = CN_IDX_DM;
- * addr.nl_pid = 0;
- * r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
- * opt = addr.nl_groups;
- * setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
- *
- * User-space will then wait to receive requests form the kernel, which it
- * will process as described below. The requests are received in the form,
- * ((struct dm_ulog_request) + (additional data)). Depending on the request
- * type, there may or may not be 'additional data'. In the descriptions below,
- * you will see 'Payload-to-userspace' and 'Payload-to-kernel'. The
- * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
- * necessary parameters to complete the request. The 'Payload-to-kernel' is
- * the 'additional data' returned to the kernel that contains the necessary
- * results of the request. The 'data_size' field in the dm_ulog_request
- * structure denotes the availability and amount of payload data.
- */
-
-/*
- * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
- * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
- * unsigned argc, char **argv);
- *
- * Payload-to-userspace:
- * A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- * A NUL-terminated string that is the name of the device that is used
- * as the backing store for the log data. 'dm_get_device' will be called
- * on this device. ('dm_put_device' will be called on this device
- * automatically after calling DM_ULOG_DTR.) If there is no device needed
- * for log data, 'data_size' in the dm_ulog_request struct should be 0.
- *
- * The UUID contained in the dm_ulog_request structure is the reference that
- * will be used by all request types to a specific log. The constructor must
- * record this association with the instance created.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field, filling the
- * data field with the log device if necessary, and setting 'data_size'
- * appropriately.
- */
-#define DM_ULOG_CTR 1
-
-/*
- * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
- * void (*dtr)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- * None. ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being destroyed. There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_DTR 2
-
-/*
- * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*presuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being presuspended. There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_PRESUSPEND 3
-
-/*
- * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*postsuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being postsuspended. There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_POSTSUSPEND 4
-
-/*
- * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
- * int (*resume)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being resumed. There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_RESUME 5
-
-/*
- * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
- * uint32_t (*get_region_size)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * uint64_t - contains the region size
- *
- * The region size is something that was determined at constructor time.
- * It is returned in the payload area and 'data_size' is set to
- * reflect this.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_REGION_SIZE 6
-
-/*
- * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
- * int (*is_clean)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- * uint64_t - the region to get clean status on
- * Payload-to-kernel:
- * int64_t - 1 if clean, 0 otherwise
- *
- * Payload is sizeof(uint64_t) and contains the region for which the clean
- * status is being made.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
- * 1 (clean), setting 'data_size' and 'error' appropriately.
- */
-#define DM_ULOG_IS_CLEAN 7
-
-/*
- * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
- * int (*in_sync)(struct dm_dirty_log *log, region_t region,
- * int can_block);
- *
- * Payload-to-userspace:
- * uint64_t - the region to get sync status on
- * Payload-to-kernel:
- * int64_t - 1 if in-sync, 0 otherwise
- *
- * Exactly the same as 'is_clean' above, except this time asking "has the
- * region been recovered?" vs. "is the region not being modified?"
- */
-#define DM_ULOG_IN_SYNC 8
-
-/*
- * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
- * int (*flush)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * None.
- *
- * No incoming or outgoing payload. Simply flush log state to disk.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_FLUSH 9
-
-/*
- * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
- * void (*mark_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- * uint64_t [] - region(s) to mark
- * Payload-to-kernel:
- * None.
- *
- * Incoming payload contains the one or more regions to mark dirty.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_MARK_REGION 10
-
-/*
- * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
- * void (*clear_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- * uint64_t [] - region(s) to clear
- * Payload-to-kernel:
- * None.
- *
- * Incoming payload contains the one or more regions to mark clean.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_CLEAR_REGION 11
-
-/*
- * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
- * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * {
- * int64_t i; -- 1 if recovery necessary, 0 otherwise
- * uint64_t r; -- The region to recover if i=1
- * }
- * 'data_size' should be set appropriately.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_RESYNC_WORK 12
-
-/*
- * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
- * void (*set_region_sync)(struct dm_dirty_log *log,
- * region_t region, int in_sync);
- *
- * Payload-to-userspace:
- * {
- * uint64_t - region to set sync state on
- * int64_t - 0 if not-in-sync, 1 if in-sync
- * }
- * Payload-to-kernel:
- * None.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_SET_REGION_SYNC 13
-
-/*
- * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
- * region_t (*get_sync_count)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * uint64_t - the number of in-sync regions
- *
- * No incoming payload. Kernel-bound payload contains the number of
- * regions that are in-sync (in a size_t).
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_GET_SYNC_COUNT 14
-
-/*
- * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
- * char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * Character string containing STATUSTYPE_INFO
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_INFO 15
-
-/*
- * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
- * char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- * None.
- * Payload-to-kernel:
- * Character string containing STATUSTYPE_TABLE
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_TABLE 16
-
-/*
- * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
- * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- * uint64_t - region to determine recovery status on
- * Payload-to-kernel:
- * {
- * int64_t is_recovering; -- 0 if no, 1 if yes
- * uint64_t in_sync_hint; -- lowest region still needing resync
- * }
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_IS_REMOTE_RECOVERING 17
-
-/*
- * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
- *
- * Payload-to-userspace:
- * A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- * None. ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * We are reserving 8 bits of the 32-bit 'request_type' field for the
- * various request types above. The remaining 24-bits are currently
- * set to zero and are reserved for future use and compatibility concerns.
- *
- * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
- * request type from the 'request_type' field to maintain forward compatibility.
- */
-#define DM_ULOG_REQUEST_MASK 0xFF
-#define DM_ULOG_REQUEST_TYPE(request_type) \
- (DM_ULOG_REQUEST_MASK & (request_type))
-
-/*
- * DM_ULOG_REQUEST_VERSION is incremented when there is a
- * change to the way information is passed between kernel
- * and userspace. This could be a structure change of
- * dm_ulog_request or a change in the way requests are
- * issued/handled. Changes are outlined here:
- * version 1: Initial implementation
- * version 2: DM_ULOG_CTR allowed to return a string containing a
- * device name that is to be registered with DM via
- * 'dm_get_device'.
- */
-#define DM_ULOG_REQUEST_VERSION 2
-
-struct dm_ulog_request {
- /*
- * The local unique identifier (luid) and the universally unique
- * identifier (uuid) are used to tie a request to a specific
- * mirror log. A single machine log could probably make due with
- * just the 'luid', but a cluster-aware log must use the 'uuid' and
- * the 'luid'. The uuid is what is required for node to node
- * communication concerning a particular log, but the 'luid' helps
- * differentiate between logs that are being swapped and have the
- * same 'uuid'. (Think "live" and "inactive" device-mapper tables.)
- */
- uint64_t luid;
- char uuid[DM_UUID_LEN];
- char padding[3]; /* Padding because DM_UUID_LEN = 129 */
-
- uint32_t version; /* See DM_ULOG_REQUEST_VERSION */
- int32_t error; /* Used to report back processing errors */
-
- uint32_t seq; /* Sequence number for request */
- uint32_t request_type; /* DM_ULOG_* defined above */
- uint32_t data_size; /* How much data (not including this struct) */
-
- char data[0];
-};
-
-#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/include/linux/dn.h b/include/linux/dn.h
deleted file mode 100644
index 9c50445..0000000
--- a/include/linux/dn.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef _LINUX_DN_H
-#define _LINUX_DN_H
-
-#include <linux/types.h>
-
-/*
-
- DECnet Data Structures and Constants
-
-*/
-
-/*
- * DNPROTO_NSP can't be the same as SOL_SOCKET,
- * so increment each by one (compared to ULTRIX)
- */
-#define DNPROTO_NSP 2 /* NSP protocol number */
-#define DNPROTO_ROU 3 /* Routing protocol number */
-#define DNPROTO_NML 4 /* Net mgt protocol number */
-#define DNPROTO_EVL 5 /* Evl protocol number (usr) */
-#define DNPROTO_EVR 6 /* Evl protocol number (evl) */
-#define DNPROTO_NSPT 7 /* NSP trace protocol number */
-
-
-#define DN_ADDL 2
-#define DN_MAXADDL 2 /* ULTRIX headers have 20 here, but pathworks has 2 */
-#define DN_MAXOPTL 16
-#define DN_MAXOBJL 16
-#define DN_MAXACCL 40
-#define DN_MAXALIASL 128
-#define DN_MAXNODEL 256
-#define DNBUFSIZE 65023
-
-/*
- * SET/GET Socket options - must match the DSO_ numbers below
- */
-#define SO_CONDATA 1
-#define SO_CONACCESS 2
-#define SO_PROXYUSR 3
-#define SO_LINKINFO 7
-
-#define DSO_CONDATA 1 /* Set/Get connect data */
-#define DSO_DISDATA 10 /* Set/Get disconnect data */
-#define DSO_CONACCESS 2 /* Set/Get connect access data */
-#define DSO_ACCEPTMODE 4 /* Set/Get accept mode */
-#define DSO_CONACCEPT 5 /* Accept deferred connection */
-#define DSO_CONREJECT 6 /* Reject deferred connection */
-#define DSO_LINKINFO 7 /* Set/Get link information */
-#define DSO_STREAM 8 /* Set socket type to stream */
-#define DSO_SEQPACKET 9 /* Set socket type to sequenced packet */
-#define DSO_MAXWINDOW 11 /* Maximum window size allowed */
-#define DSO_NODELAY 12 /* Turn off nagle */
-#define DSO_CORK 13 /* Wait for more data! */
-#define DSO_SERVICES 14 /* NSP Services field */
-#define DSO_INFO 15 /* NSP Info field */
-#define DSO_MAX 15 /* Maximum option number */
-
-
-/* LINK States */
-#define LL_INACTIVE 0
-#define LL_CONNECTING 1
-#define LL_RUNNING 2
-#define LL_DISCONNECTING 3
-
-#define ACC_IMMED 0
-#define ACC_DEFER 1
-
-#define SDF_WILD 1 /* Wild card object */
-#define SDF_PROXY 2 /* Addr eligible for proxy */
-#define SDF_UICPROXY 4 /* Use uic-based proxy */
-
-/* Structures */
-
-
-struct dn_naddr {
- __le16 a_len;
- __u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
-};
-
-struct sockaddr_dn {
- __u16 sdn_family;
- __u8 sdn_flags;
- __u8 sdn_objnum;
- __le16 sdn_objnamel;
- __u8 sdn_objname[DN_MAXOBJL];
- struct dn_naddr sdn_add;
-};
-#define sdn_nodeaddrl sdn_add.a_len /* Node address length */
-#define sdn_nodeaddr sdn_add.a_addr /* Node address */
-
-
-
-/*
- * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
- */
-struct optdata_dn {
- __le16 opt_status; /* Extended status return */
-#define opt_sts opt_status
- __le16 opt_optl; /* Length of user data */
- __u8 opt_data[16]; /* User data */
-};
-
-struct accessdata_dn {
- __u8 acc_accl;
- __u8 acc_acc[DN_MAXACCL];
- __u8 acc_passl;
- __u8 acc_pass[DN_MAXACCL];
- __u8 acc_userl;
- __u8 acc_user[DN_MAXACCL];
-};
-
-/*
- * DECnet logical link information structure
- */
-struct linkinfo_dn {
- __u16 idn_segsize; /* Segment size for link */
- __u8 idn_linkstate; /* Logical link state */
-};
-
-/*
- * Ethernet address format (for DECnet)
- */
-union etheraddress {
- __u8 dne_addr[6]; /* Full ethernet address */
- struct {
- __u8 dne_hiord[4]; /* DECnet HIORD prefix */
- __u8 dne_nodeaddr[2]; /* DECnet node address */
- } dne_remote;
-};
-
-
-/*
- * DECnet physical socket address format
- */
-struct dn_addr {
- __le16 dna_family; /* AF_DECnet */
- union etheraddress dna_netaddr; /* DECnet ethernet address */
-};
-
-#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
-
-#define SIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
-#define SIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
-#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
-#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
-
-#endif /* _LINUX_DN_H */
diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h
deleted file mode 100644
index 8655280..0000000
--- a/include/linux/dqblk_xfs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesset General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef _LINUX_DQBLK_XFS_H
-#define _LINUX_DQBLK_XFS_H
-
-#include <linux/types.h>
-
-/*
- * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
- */
-
-#define XQM_CMD(x) (('X'<<8)+(x)) /* note: forms first QCMD argument */
-#define XQM_COMMAND(x) (((x) & (0xff<<8)) == ('X'<<8)) /* test if for XFS */
-
-#define XQM_USRQUOTA 0 /* system call user quota type */
-#define XQM_GRPQUOTA 1 /* system call group quota type */
-#define XQM_PRJQUOTA 2 /* system call project quota type */
-#define XQM_MAXQUOTAS 3
-
-#define Q_XQUOTAON XQM_CMD(1) /* enable accounting/enforcement */
-#define Q_XQUOTAOFF XQM_CMD(2) /* disable accounting/enforcement */
-#define Q_XGETQUOTA XQM_CMD(3) /* get disk limits and usage */
-#define Q_XSETQLIM XQM_CMD(4) /* set disk limits */
-#define Q_XGETQSTAT XQM_CMD(5) /* get quota subsystem status */
-#define Q_XQUOTARM XQM_CMD(6) /* free disk space used by dquots */
-#define Q_XQUOTASYNC XQM_CMD(7) /* delalloc flush, updates dquots */
-
-/*
- * fs_disk_quota structure:
- *
- * This contains the current quota information regarding a user/proj/group.
- * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
- * 512 bytes.
- */
-#define FS_DQUOT_VERSION 1 /* fs_disk_quota.d_version */
-typedef struct fs_disk_quota {
- __s8 d_version; /* version of this structure */
- __s8 d_flags; /* FS_{USER,PROJ,GROUP}_QUOTA */
- __u16 d_fieldmask; /* field specifier */
- __u32 d_id; /* user, project, or group ID */
- __u64 d_blk_hardlimit;/* absolute limit on disk blks */
- __u64 d_blk_softlimit;/* preferred limit on disk blks */
- __u64 d_ino_hardlimit;/* maximum # allocated inodes */
- __u64 d_ino_softlimit;/* preferred inode limit */
- __u64 d_bcount; /* # disk blocks owned by the user */
- __u64 d_icount; /* # inodes owned by the user */
- __s32 d_itimer; /* zero if within inode limits */
- /* if not, we refuse service */
- __s32 d_btimer; /* similar to above; for disk blocks */
- __u16 d_iwarns; /* # warnings issued wrt num inodes */
- __u16 d_bwarns; /* # warnings issued wrt disk blocks */
- __s32 d_padding2; /* padding2 - for future use */
- __u64 d_rtb_hardlimit;/* absolute limit on realtime blks */
- __u64 d_rtb_softlimit;/* preferred limit on RT disk blks */
- __u64 d_rtbcount; /* # realtime blocks owned */
- __s32 d_rtbtimer; /* similar to above; for RT disk blks */
- __u16 d_rtbwarns; /* # warnings issued wrt RT disk blks */
- __s16 d_padding3; /* padding3 - for future use */
- char d_padding4[8]; /* yet more padding */
-} fs_disk_quota_t;
-
-/*
- * These fields are sent to Q_XSETQLIM to specify fields that need to change.
- */
-#define FS_DQ_ISOFT (1<<0)
-#define FS_DQ_IHARD (1<<1)
-#define FS_DQ_BSOFT (1<<2)
-#define FS_DQ_BHARD (1<<3)
-#define FS_DQ_RTBSOFT (1<<4)
-#define FS_DQ_RTBHARD (1<<5)
-#define FS_DQ_LIMIT_MASK (FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
- FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
-/*
- * These timers can only be set in super user's dquot. For others, timers are
- * automatically started and stopped. Superusers timer values set the limits
- * for the rest. In case these values are zero, the DQ_{F,B}TIMELIMIT values
- * defined below are used.
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BTIMER (1<<6)
-#define FS_DQ_ITIMER (1<<7)
-#define FS_DQ_RTBTIMER (1<<8)
-#define FS_DQ_TIMER_MASK (FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
-
-/*
- * Warning counts are set in both super user's dquot and others. For others,
- * warnings are set/cleared by the administrators (or automatically by going
- * below the soft limit). Superusers warning values set the warning limits
- * for the rest. In case these values are zero, the DQ_{F,B}WARNLIMIT values
- * defined below are used.
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BWARNS (1<<9)
-#define FS_DQ_IWARNS (1<<10)
-#define FS_DQ_RTBWARNS (1<<11)
-#define FS_DQ_WARNS_MASK (FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
-
-/*
- * Accounting values. These can only be set for filesystem with
- * non-transactional quotas that require quotacheck(8) in userspace.
- */
-#define FS_DQ_BCOUNT (1<<12)
-#define FS_DQ_ICOUNT (1<<13)
-#define FS_DQ_RTBCOUNT (1<<14)
-#define FS_DQ_ACCT_MASK (FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
-
-/*
- * Various flags related to quotactl(2).
- */
-#define FS_QUOTA_UDQ_ACCT (1<<0) /* user quota accounting */
-#define FS_QUOTA_UDQ_ENFD (1<<1) /* user quota limits enforcement */
-#define FS_QUOTA_GDQ_ACCT (1<<2) /* group quota accounting */
-#define FS_QUOTA_GDQ_ENFD (1<<3) /* group quota limits enforcement */
-#define FS_QUOTA_PDQ_ACCT (1<<4) /* project quota accounting */
-#define FS_QUOTA_PDQ_ENFD (1<<5) /* project quota limits enforcement */
-
-#define FS_USER_QUOTA (1<<0) /* user quota type */
-#define FS_PROJ_QUOTA (1<<1) /* project quota type */
-#define FS_GROUP_QUOTA (1<<2) /* group quota type */
-
-/*
- * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
- * Provides a centralized way to get meta information about the quota subsystem.
- * eg. space taken up for user and group quotas, number of dquots currently
- * incore.
- */
-#define FS_QSTAT_VERSION 1 /* fs_quota_stat.qs_version */
-
-/*
- * Some basic information about 'quota files'.
- */
-typedef struct fs_qfilestat {
- __u64 qfs_ino; /* inode number */
- __u64 qfs_nblks; /* number of BBs 512-byte-blks */
- __u32 qfs_nextents; /* number of extents */
-} fs_qfilestat_t;
-
-typedef struct fs_quota_stat {
- __s8 qs_version; /* version number for future changes */
- __u16 qs_flags; /* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
- __s8 qs_pad; /* unused */
- fs_qfilestat_t qs_uquota; /* user quota storage information */
- fs_qfilestat_t qs_gquota; /* group quota storage information */
- __u32 qs_incoredqs; /* number of dquots incore */
- __s32 qs_btimelimit; /* limit for blks timer */
- __s32 qs_itimelimit; /* limit for inodes timer */
- __s32 qs_rtbtimelimit;/* limit for rt blks timer */
- __u16 qs_bwarnlimit; /* limit for num warnings */
- __u16 qs_iwarnlimit; /* limit for num warnings */
-} fs_quota_stat_t;
-
-#endif /* _LINUX_DQBLK_XFS_H */
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 4cbd0fe..83d4371 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,165 +30,9 @@
#ifndef _LINUX_EDD_H
#define _LINUX_EDD_H
-#include <linux/types.h>
-
-#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
- in boot_params - treat this as 1 byte */
-#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */
-#define EDDEXTSIZE 8 /* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
- in boot_params - treat this as 1 byte */
+#include <uapi/linux/edd.h>
#ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID (1 << 1)
-#define EDD_INFO_REMOVABLE (1 << 2)
-#define EDD_INFO_WRITE_VERIFY (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4)
-#define EDD_INFO_LOCKABLE (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6)
-#define EDD_INFO_USE_INT13_FN50 (1 << 7)
-
-struct edd_device_params {
- __u16 length;
- __u16 info_flags;
- __u32 num_default_cylinders;
- __u32 num_default_heads;
- __u32 sectors_per_track;
- __u64 number_of_sectors;
- __u16 bytes_per_sector;
- __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */
- __u16 key; /* = 0xBEDD */
- __u8 device_path_info_length; /* = 44 */
- __u8 reserved2;
- __u16 reserved3;
- __u8 host_bus_type[4];
- __u8 interface_type[8];
- union {
- struct {
- __u16 base_address;
- __u16 reserved1;
- __u32 reserved2;
- } __attribute__ ((packed)) isa;
- struct {
- __u8 bus;
- __u8 slot;
- __u8 function;
- __u8 channel;
- __u32 reserved;
- } __attribute__ ((packed)) pci;
- /* pcix is same as pci */
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) ibnd;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) xprs;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) htpt;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) unknown;
- } interface_path;
- union {
- struct {
- __u8 device;
- __u8 reserved1;
- __u16 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) ata;
- struct {
- __u8 device;
- __u8 lun;
- __u8 reserved1;
- __u8 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) atapi;
- struct {
- __u16 id;
- __u64 lun;
- __u16 reserved1;
- __u32 reserved2;
- } __attribute__ ((packed)) scsi;
- struct {
- __u64 serial_number;
- __u64 reserved;
- } __attribute__ ((packed)) usb;
- struct {
- __u64 eui;
- __u64 reserved;
- } __attribute__ ((packed)) i1394;
- struct {
- __u64 wwid;
- __u64 lun;
- } __attribute__ ((packed)) fibre;
- struct {
- __u64 identity_tag;
- __u64 reserved;
- } __attribute__ ((packed)) i2o;
- struct {
- __u32 array_number;
- __u32 reserved1;
- __u64 reserved2;
- } __attribute__ ((packed)) raid;
- struct {
- __u8 device;
- __u8 reserved1;
- __u16 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) sata;
- struct {
- __u64 reserved1;
- __u64 reserved2;
- } __attribute__ ((packed)) unknown;
- } device_path;
- __u8 reserved4;
- __u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
- __u8 device;
- __u8 version;
- __u16 interface_support;
- __u16 legacy_max_cylinder;
- __u8 legacy_max_head;
- __u8 legacy_sectors_per_track;
- struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
- unsigned int mbr_signature[EDD_MBR_SIG_MAX];
- struct edd_info edd_info[EDDMAXNR];
- unsigned char mbr_signature_nr;
- unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
extern struct edd edd;
-#endif /* __KERNEL__ */
#endif /*!__ASSEMBLY__ */
-
#endif /* _LINUX_EDD_H */
diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h
deleted file mode 100644
index a01be90..0000000
--- a/include/linux/efs_fs_sb.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * efs_fs_sb.h
- *
- * Copyright (c) 1999 Al Smith
- *
- * Portions derived from IRIX header files (c) 1988 Silicon Graphics
- */
-
-#ifndef __EFS_FS_SB_H__
-#define __EFS_FS_SB_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* EFS superblock magic numbers */
-#define EFS_MAGIC 0x072959
-#define EFS_NEWMAGIC 0x07295a
-
-#define IS_EFS_MAGIC(x) ((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
-
-#define EFS_SUPER 1
-#define EFS_ROOTINODE 2
-
-/* efs superblock on disk */
-struct efs_super {
- __be32 fs_size; /* size of filesystem, in sectors */
- __be32 fs_firstcg; /* bb offset to first cg */
- __be32 fs_cgfsize; /* size of cylinder group in bb's */
- __be16 fs_cgisize; /* bb's of inodes per cylinder group */
- __be16 fs_sectors; /* sectors per track */
- __be16 fs_heads; /* heads per cylinder */
- __be16 fs_ncg; /* # of cylinder groups in filesystem */
- __be16 fs_dirty; /* fs needs to be fsck'd */
- __be32 fs_time; /* last super-block update */
- __be32 fs_magic; /* magic number */
- char fs_fname[6]; /* file system name */
- char fs_fpack[6]; /* file system pack name */
- __be32 fs_bmsize; /* size of bitmap in bytes */
- __be32 fs_tfree; /* total free data blocks */
- __be32 fs_tinode; /* total free inodes */
- __be32 fs_bmblock; /* bitmap location. */
- __be32 fs_replsb; /* Location of replicated superblock. */
- __be32 fs_lastialloc; /* last allocated inode */
- char fs_spare[20]; /* space for expansion - MUST BE ZERO */
- __be32 fs_checksum; /* checksum of volume portion of fs */
-};
-
-/* efs superblock information in memory */
-struct efs_sb_info {
- __u32 fs_magic; /* superblock magic number */
- __u32 fs_start; /* first block of filesystem */
- __u32 first_block; /* first data block in filesystem */
- __u32 total_blocks; /* total number of blocks in filesystem */
- __u32 group_size; /* # of blocks a group consists of */
- __u32 data_free; /* # of free data blocks */
- __u32 inode_free; /* # of free inodes */
- __u16 inode_blocks; /* # of blocks used for inodes in every grp */
- __u16 total_groups; /* # of groups */
-};
-
-#endif /* __EFS_FS_SB_H__ */
-
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
deleted file mode 100644
index 8e2b7ba..0000000
--- a/include/linux/elf-em.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _LINUX_ELF_EM_H
-#define _LINUX_ELF_EM_H
-
-/* These constants define the various ELF target machines */
-#define EM_NONE 0
-#define EM_M32 1
-#define EM_SPARC 2
-#define EM_386 3
-#define EM_68K 4
-#define EM_88K 5
-#define EM_486 6 /* Perhaps disused */
-#define EM_860 7
-#define EM_MIPS 8 /* MIPS R3000 (officially, big-endian only) */
- /* Next two are historical and binaries and
- modules of these types will be rejected by
- Linux. */
-#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
-#define EM_MIPS_RS4_BE 10 /* MIPS R4000 big-endian */
-
-#define EM_PARISC 15 /* HPPA */
-#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
-#define EM_PPC 20 /* PowerPC */
-#define EM_PPC64 21 /* PowerPC64 */
-#define EM_SPU 23 /* Cell BE SPU */
-#define EM_SH 42 /* SuperH */
-#define EM_SPARCV9 43 /* SPARC v9 64-bit */
-#define EM_IA_64 50 /* HP/Intel IA-64 */
-#define EM_X86_64 62 /* AMD x86-64 */
-#define EM_S390 22 /* IBM S/390 */
-#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
-#define EM_V850 87 /* NEC v850 */
-#define EM_M32R 88 /* Renesas M32R */
-#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
-#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
-#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
-#define EM_TI_C6000 140 /* TI C6X DSPs */
-#define EM_FRV 0x5441 /* Fujitsu FR-V */
-#define EM_AVR32 0x18ad /* Atmel AVR32 */
-
-/*
- * This is an interim value that we will use until the committee comes
- * up with a final number.
- */
-#define EM_ALPHA 0x9026
-
-/* Bogus old v850 magic number, used by old tools. */
-#define EM_CYGNUS_V850 0x9080
-/* Bogus old m32r magic number, used by old tools. */
-#define EM_CYGNUS_M32R 0x9041
-/* This is the old interim value for S/390 architecture */
-#define EM_S390_OLD 0xA390
-/* Also Panasonic/MEI MN10300, AM33 */
-#define EM_CYGNUS_MN10300 0xbeef
-
-
-#endif /* _LINUX_ELF_EM_H */
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
deleted file mode 100644
index 7cd2e80..0000000
--- a/include/linux/elf-fdpic.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* elf-fdpic.h: FDPIC ELF load map
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_ELF_FDPIC_H
-#define _LINUX_ELF_FDPIC_H
-
-#include <linux/elf.h>
-
-#define PT_GNU_STACK (PT_LOOS + 0x474e551)
-
-/* segment mappings for ELF FDPIC libraries/executables/interpreters */
-struct elf32_fdpic_loadseg {
- Elf32_Addr addr; /* core address to which mapped */
- Elf32_Addr p_vaddr; /* VMA recorded in file */
- Elf32_Word p_memsz; /* allocation size recorded in file */
-};
-
-struct elf32_fdpic_loadmap {
- Elf32_Half version; /* version of these structures, just in case... */
- Elf32_Half nsegs; /* number of segments */
- struct elf32_fdpic_loadseg segs[];
-};
-
-#define ELF32_FDPIC_LOADMAP_VERSION 0x0000
-
-/*
- * binfmt binary parameters structure
- */
-struct elf_fdpic_params {
- struct elfhdr hdr; /* ref copy of ELF header */
- struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */
- struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */
- unsigned long elfhdr_addr; /* mapped ELF header user address */
- unsigned long ph_addr; /* mapped PT_PHDR user address */
- unsigned long map_addr; /* mapped loadmap user address */
- unsigned long entry_addr; /* mapped entry user address */
- unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */
- unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */
- unsigned long load_addr; /* user address at which to map binary */
- unsigned long flags;
-#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */
-#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */
-#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */
-#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant
- * displacement */
-#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */
-#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */
-#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */
-#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */
-#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_MMU
-extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
- struct elf_fdpic_params *interp_params,
- unsigned long *start_stack,
- unsigned long *start_brk);
-#endif
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 59ef406..8c9048e 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -1,420 +1,9 @@
#ifndef _LINUX_ELF_H
#define _LINUX_ELF_H
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
#include <asm/elf.h>
-#endif
-
-/* 32-bit ELF base types. */
-typedef __u32 Elf32_Addr;
-typedef __u16 Elf32_Half;
-typedef __u32 Elf32_Off;
-typedef __s32 Elf32_Sword;
-typedef __u32 Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64 Elf64_Addr;
-typedef __u16 Elf64_Half;
-typedef __s16 Elf64_SHalf;
-typedef __u64 Elf64_Off;
-typedef __s32 Elf64_Sword;
-typedef __u32 Elf64_Word;
-typedef __u64 Elf64_Xword;
-typedef __s64 Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL 0
-#define PT_LOAD 1
-#define PT_DYNAMIC 2
-#define PT_INTERP 3
-#define PT_NOTE 4
-#define PT_SHLIB 5
-#define PT_PHDR 6
-#define PT_TLS 7 /* Thread local storage segment */
-#define PT_LOOS 0x60000000 /* OS-specific */
-#define PT_HIOS 0x6fffffff /* OS-specific */
-#define PT_LOPROC 0x70000000
-#define PT_HIPROC 0x7fffffff
-#define PT_GNU_EH_FRAME 0x6474e550
-
-#define PT_GNU_STACK (PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- * Part No: 817-1984-17, September 2008.
- * URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- * Draft Version 0.99.,
- * May 11, 2009.
- * URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE 0
-#define ET_REL 1
-#define ET_EXEC 2
-#define ET_DYN 3
-#define ET_CORE 4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL 0
-#define DT_NEEDED 1
-#define DT_PLTRELSZ 2
-#define DT_PLTGOT 3
-#define DT_HASH 4
-#define DT_STRTAB 5
-#define DT_SYMTAB 6
-#define DT_RELA 7
-#define DT_RELASZ 8
-#define DT_RELAENT 9
-#define DT_STRSZ 10
-#define DT_SYMENT 11
-#define DT_INIT 12
-#define DT_FINI 13
-#define DT_SONAME 14
-#define DT_RPATH 15
-#define DT_SYMBOLIC 16
-#define DT_REL 17
-#define DT_RELSZ 18
-#define DT_RELENT 19
-#define DT_PLTREL 20
-#define DT_DEBUG 21
-#define DT_TEXTREL 22
-#define DT_JMPREL 23
-#define DT_ENCODING 32
-#define OLD_DT_LOOS 0x60000000
-#define DT_LOOS 0x6000000d
-#define DT_HIOS 0x6ffff000
-#define DT_VALRNGLO 0x6ffffd00
-#define DT_VALRNGHI 0x6ffffdff
-#define DT_ADDRRNGLO 0x6ffffe00
-#define DT_ADDRRNGHI 0x6ffffeff
-#define DT_VERSYM 0x6ffffff0
-#define DT_RELACOUNT 0x6ffffff9
-#define DT_RELCOUNT 0x6ffffffa
-#define DT_FLAGS_1 0x6ffffffb
-#define DT_VERDEF 0x6ffffffc
-#define DT_VERDEFNUM 0x6ffffffd
-#define DT_VERNEED 0x6ffffffe
-#define DT_VERNEEDNUM 0x6fffffff
-#define OLD_DT_HIOS 0x6fffffff
-#define DT_LOPROC 0x70000000
-#define DT_HIPROC 0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL 0
-#define STB_GLOBAL 1
-#define STB_WEAK 2
-
-#define STT_NOTYPE 0
-#define STT_OBJECT 1
-#define STT_FUNC 2
-#define STT_SECTION 3
-#define STT_FILE 4
-#define STT_COMMON 5
-#define STT_TLS 6
-
-#define ELF_ST_BIND(x) ((x) >> 4)
-#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x) ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x) ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x)
-
-typedef struct dynamic{
- Elf32_Sword d_tag;
- union{
- Elf32_Sword d_val;
- Elf32_Addr d_ptr;
- } d_un;
-} Elf32_Dyn;
-
-typedef struct {
- Elf64_Sxword d_tag; /* entry tag value */
- union {
- Elf64_Xword d_val;
- Elf64_Addr d_ptr;
- } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i) ((i) >> 32)
-#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
-
-typedef struct elf32_rel {
- Elf32_Addr r_offset;
- Elf32_Word r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
- Elf64_Addr r_offset; /* Location at which to apply the action */
- Elf64_Xword r_info; /* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
- Elf32_Addr r_offset;
- Elf32_Word r_info;
- Elf32_Sword r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
- Elf64_Addr r_offset; /* Location at which to apply the action */
- Elf64_Xword r_info; /* index and type of relocation */
- Elf64_Sxword r_addend; /* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
- Elf32_Word st_name;
- Elf32_Addr st_value;
- Elf32_Word st_size;
- unsigned char st_info;
- unsigned char st_other;
- Elf32_Half st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
- Elf64_Word st_name; /* Symbol name, index in string tbl */
- unsigned char st_info; /* Type and binding attributes */
- unsigned char st_other; /* No defined meaning, 0 */
- Elf64_Half st_shndx; /* Associated section index */
- Elf64_Addr st_value; /* Value of the symbol */
- Elf64_Xword st_size; /* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT 16
-
-typedef struct elf32_hdr{
- unsigned char e_ident[EI_NIDENT];
- Elf32_Half e_type;
- Elf32_Half e_machine;
- Elf32_Word e_version;
- Elf32_Addr e_entry; /* Entry point */
- Elf32_Off e_phoff;
- Elf32_Off e_shoff;
- Elf32_Word e_flags;
- Elf32_Half e_ehsize;
- Elf32_Half e_phentsize;
- Elf32_Half e_phnum;
- Elf32_Half e_shentsize;
- Elf32_Half e_shnum;
- Elf32_Half e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
- unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */
- Elf64_Half e_type;
- Elf64_Half e_machine;
- Elf64_Word e_version;
- Elf64_Addr e_entry; /* Entry point virtual address */
- Elf64_Off e_phoff; /* Program header table file offset */
- Elf64_Off e_shoff; /* Section header table file offset */
- Elf64_Word e_flags;
- Elf64_Half e_ehsize;
- Elf64_Half e_phentsize;
- Elf64_Half e_phnum;
- Elf64_Half e_shentsize;
- Elf64_Half e_shnum;
- Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
- header, p_flags. */
-#define PF_R 0x4
-#define PF_W 0x2
-#define PF_X 0x1
-
-typedef struct elf32_phdr{
- Elf32_Word p_type;
- Elf32_Off p_offset;
- Elf32_Addr p_vaddr;
- Elf32_Addr p_paddr;
- Elf32_Word p_filesz;
- Elf32_Word p_memsz;
- Elf32_Word p_flags;
- Elf32_Word p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
- Elf64_Word p_type;
- Elf64_Word p_flags;
- Elf64_Off p_offset; /* Segment file offset */
- Elf64_Addr p_vaddr; /* Segment virtual address */
- Elf64_Addr p_paddr; /* Segment physical address */
- Elf64_Xword p_filesz; /* Segment size in file */
- Elf64_Xword p_memsz; /* Segment size in memory */
- Elf64_Xword p_align; /* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL 0
-#define SHT_PROGBITS 1
-#define SHT_SYMTAB 2
-#define SHT_STRTAB 3
-#define SHT_RELA 4
-#define SHT_HASH 5
-#define SHT_DYNAMIC 6
-#define SHT_NOTE 7
-#define SHT_NOBITS 8
-#define SHT_REL 9
-#define SHT_SHLIB 10
-#define SHT_DYNSYM 11
-#define SHT_NUM 12
-#define SHT_LOPROC 0x70000000
-#define SHT_HIPROC 0x7fffffff
-#define SHT_LOUSER 0x80000000
-#define SHT_HIUSER 0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE 0x1
-#define SHF_ALLOC 0x2
-#define SHF_EXECINSTR 0x4
-#define SHF_MASKPROC 0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF 0
-#define SHN_LORESERVE 0xff00
-#define SHN_LOPROC 0xff00
-#define SHN_HIPROC 0xff1f
-#define SHN_ABS 0xfff1
-#define SHN_COMMON 0xfff2
-#define SHN_HIRESERVE 0xffff
-
-typedef struct elf32_shdr {
- Elf32_Word sh_name;
- Elf32_Word sh_type;
- Elf32_Word sh_flags;
- Elf32_Addr sh_addr;
- Elf32_Off sh_offset;
- Elf32_Word sh_size;
- Elf32_Word sh_link;
- Elf32_Word sh_info;
- Elf32_Word sh_addralign;
- Elf32_Word sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
- Elf64_Word sh_name; /* Section name, index in string tbl */
- Elf64_Word sh_type; /* Type of section */
- Elf64_Xword sh_flags; /* Miscellaneous section attributes */
- Elf64_Addr sh_addr; /* Section virtual addr at execution */
- Elf64_Off sh_offset; /* Section file offset */
- Elf64_Xword sh_size; /* Size of section in bytes */
- Elf64_Word sh_link; /* Index of another section */
- Elf64_Word sh_info; /* Additional section information */
- Elf64_Xword sh_addralign; /* Section alignment */
- Elf64_Xword sh_entsize; /* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define EI_MAG0 0 /* e_ident[] indexes */
-#define EI_MAG1 1
-#define EI_MAG2 2
-#define EI_MAG3 3
-#define EI_CLASS 4
-#define EI_DATA 5
-#define EI_VERSION 6
-#define EI_OSABI 7
-#define EI_PAD 8
-
-#define ELFMAG0 0x7f /* EI_MAG */
-#define ELFMAG1 'E'
-#define ELFMAG2 'L'
-#define ELFMAG3 'F'
-#define ELFMAG "\177ELF"
-#define SELFMAG 4
-
-#define ELFCLASSNONE 0 /* EI_CLASS */
-#define ELFCLASS32 1
-#define ELFCLASS64 2
-#define ELFCLASSNUM 3
-
-#define ELFDATANONE 0 /* e_ident[EI_DATA] */
-#define ELFDATA2LSB 1
-#define ELFDATA2MSB 2
-
-#define EV_NONE 0 /* e_version, EI_VERSION */
-#define EV_CURRENT 1
-#define EV_NUM 2
-
-#define ELFOSABI_NONE 0
-#define ELFOSABI_LINUX 3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS 1
-#define NT_PRFPREG 2
-#define NT_PRPSINFO 3
-#define NT_TASKSTRUCT 4
-#define NT_AUXV 6
-/*
- * Note to userspace developers: size of NT_SIGINFO note may increase
- * in the future to accomodate more fields, don't assume it is fixed!
- */
-#define NT_SIGINFO 0x53494749
-#define NT_FILE 0x46494c45
-#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
-#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */
-#define NT_S390_TIMER 0x301 /* s390 timer register */
-#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */
-#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */
-#define NT_S390_CTRS 0x304 /* s390 control registers */
-#define NT_S390_PREFIX 0x305 /* s390 prefix register */
-#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */
-#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */
-#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */
-#define NT_ARM_TLS 0x401 /* ARM TLS register */
-#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
-#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
- Elf32_Word n_namesz; /* Name size */
- Elf32_Word n_descsz; /* Content size */
- Elf32_Word n_type; /* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
- Elf64_Word n_namesz; /* Name size */
- Elf64_Word n_descsz; /* Content size */
- Elf64_Word n_type; /* Content type */
-} Elf64_Nhdr;
+#include <uapi/linux/elf.h>
-#ifdef __KERNEL__
#ifndef elf_read_implies_exec
/* Executables for which elf_read_implies_exec() returns TRUE will
have the READ_IMPLIES_EXEC personality flag set automatically.
@@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file,
extern int elf_coredump_extra_notes_size(void);
extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
#endif
-#endif /* __KERNEL__ */
#endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 0698c79..cdd3d13 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -1,109 +1,11 @@
#ifndef _LINUX_ELFCORE_H
#define _LINUX_ELFCORE_H
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
#include <linux/user.h>
#include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
- int si_signo; /* signal number */
- int si_code; /* extra code */
- int si_errno; /* errno */
-};
-
-#ifdef __KERNEL__
#include <asm/elf.h>
-#endif
+#include <uapi/linux/elfcore.h>
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided. This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
- long pr_flags; /* XXX Process flags */
- short pr_why; /* XXX Reason for process halt */
- short pr_what; /* XXX More detailed reason */
-#endif
- struct elf_siginfo pr_info; /* Info associated with signal */
- short pr_cursig; /* Current signal */
- unsigned long pr_sigpend; /* Set of pending signals */
- unsigned long pr_sighold; /* Set of held signals */
-#if 0
- struct sigaltstack pr_altstack; /* Alternate stack info */
- struct sigaction pr_action; /* Signal action for current sig */
-#endif
- pid_t pr_pid;
- pid_t pr_ppid;
- pid_t pr_pgrp;
- pid_t pr_sid;
- struct timeval pr_utime; /* User time */
- struct timeval pr_stime; /* System time */
- struct timeval pr_cutime; /* Cumulative user time */
- struct timeval pr_cstime; /* Cumulative system time */
-#if 0
- long pr_instr; /* Current instruction */
-#endif
- elf_gregset_t pr_reg; /* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- /* When using FDPIC, the loadmap addresses need to be communicated
- * to GDB in order for GDB to do the necessary relocations. The
- * fields (below) used to communicate this information are placed
- * immediately after ``pr_reg'', so that the loadmap addresses may
- * be viewed as part of the register set if so desired.
- */
- unsigned long pr_exec_fdpic_loadmap;
- unsigned long pr_interp_fdpic_loadmap;
-#endif
- int pr_fpvalid; /* True if math co-processor being used. */
-};
-
-#define ELF_PRARGSZ (80) /* Number of chars for args */
-
-struct elf_prpsinfo
-{
- char pr_state; /* numeric process state */
- char pr_sname; /* char for pr_state */
- char pr_zomb; /* zombie */
- char pr_nice; /* nice val */
- unsigned long pr_flag; /* flags */
- __kernel_uid_t pr_uid;
- __kernel_gid_t pr_gid;
- pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
- /* Lots missing */
- char pr_fname[16]; /* filename of executable */
- char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ
-#endif
-
-#ifdef __KERNEL__
static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
{
#ifdef ELF_CORE_COPY_REGS
@@ -167,6 +69,4 @@ extern int
elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
extern size_t elf_core_extra_data_size(void);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
index e0de516..f6bf082 100644
--- a/include/linux/errno.h
+++ b/include/linux/errno.h
@@ -1,9 +1,8 @@
#ifndef _LINUX_ERRNO_H
#define _LINUX_ERRNO_H
-#include <asm/errno.h>
+#include <uapi/linux/errno.h>
-#ifdef __KERNEL__
/*
* These should never be seen by user programs. To return one of ERESTART*
@@ -32,5 +31,3 @@
#define EIOCBRETRY 530 /* iocb queued, will trigger a retry */
#endif
-
-#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index fd0628b..9ca23fc 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,33 +1,12 @@
#ifndef _LINUX_ERRQUEUE_H
#define _LINUX_ERRQUEUE_H 1
-#include <linux/types.h>
-
-struct sock_extended_err {
- __u32 ee_errno;
- __u8 ee_origin;
- __u8 ee_type;
- __u8 ee_code;
- __u8 ee_pad;
- __u32 ee_info;
- __u32 ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE 0
-#define SO_EE_ORIGIN_LOCAL 1
-#define SO_EE_ORIGIN_ICMP 2
-#define SO_EE_ORIGIN_ICMP6 3
-#define SO_EE_ORIGIN_TXSTATUS 4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
#include <net/ip.h>
#if IS_ENABLED(CONFIG_IPV6)
#include <linux/ipv6.h>
#endif
+#include <uapi/linux/errqueue.h>
#define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
@@ -44,5 +23,3 @@ struct sock_exterr_skb {
};
#endif
-
-#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e..c8e3e7e3 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
* scott.feldman@intel.com)
* Portions Copyright (C) Sun Microsystems 2008
*/
-
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
-#ifdef __KERNEL__
#include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
- __u32 cmd;
- __u32 supported; /* Features this interface supports */
- __u32 advertising; /* Features this interface advertises */
- __u16 speed; /* The forced speed (lower bits) in
- * Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 duplex; /* Duplex, half or full */
- __u8 port; /* Which connector port */
- __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
- * May be read-only or read-write
- * depending on the driver.
- */
- __u8 transceiver; /* Which transceiver to use */
- __u8 autoneg; /* Enable or disable autonegotiation */
- __u8 mdio_support; /* MDIO protocols supported. Read-only.
- * Not set by all drivers.
- */
- __u32 maxtxpkt; /* Tx pkts before generating tx int */
- __u32 maxrxpkt; /* Rx pkts before generating rx int */
- __u16 speed_hi; /* The forced speed (upper
- * bits) in Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 eth_tp_mdix; /* twisted pair MDI-X status */
- __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
- * link should be renegotiated if necessary
- */
- __u32 lp_advertising; /* Features the link partner advertises */
- __u32 reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
- __u32 speed)
-{
-
- ep->speed = (__u16)speed;
- ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
- return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>. This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22 1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45 2
-
-#define ETHTOOL_FWVERS_LEN 32
-#define ETHTOOL_BUSINFO_LEN 32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
- __u32 cmd;
- char driver[32]; /* driver short name, "tulip", "eepro100" */
- char version[32]; /* driver version string */
- char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
- char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
- /* For PCI devices, use pci_name(pci_dev). */
- char reserved1[32];
- char reserved2[12];
- /*
- * Some struct members below are filled in
- * using ops->get_sset_count(). Obtaining
- * this info from ethtool_drvinfo is now
- * deprecated; Use ETHTOOL_GSSET_INFO
- * instead.
- */
- __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
- __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
- __u32 testinfo_len;
- __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
- __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX 6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
- __u32 cmd;
- __u32 supported;
- __u32 wolopts;
- __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
- __u32 cmd;
- __u32 data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
- __u32 cmd;
- __u32 version; /* driver-specific, indicates different chips/revs */
- __u32 len; /* bytes */
- __u8 data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
- __u32 cmd;
- __u32 magic;
- __u32 offset; /* in bytes */
- __u32 len; /* in bytes */
- __u8 data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- * for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- * advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- * combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- * that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- * its tx lpi (after reaching 'idle' state). Effective only when eee
- * was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
- __u32 cmd;
- __u32 supported;
- __u32 advertised;
- __u32 lp_advertised;
- __u32 eee_active;
- __u32 eee_enabled;
- __u32 tx_lpi_enabled;
- __u32 tx_lpi_timer;
- __u32 reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
- __u32 cmd;
- __u32 type;
- __u32 eeprom_len;
- __u32 reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- * a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- * before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- * a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- * before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- * statistics block updates. Some drivers do not have an
- * in-memory statistic block, and in such cases this value is
- * ignored. This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- * a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- * a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- * sampling, measured in seconds. Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- * (usecs > 0 && time_since_first_completion >= usecs) ||
- * (max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated. To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- * time_since_first_completion >= usecs
- * This is deprecated. Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates. Some drivers only implement
- * one of RX or TX adaptive coalescing. Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
- __u32 cmd;
- __u32 rx_coalesce_usecs;
- __u32 rx_max_coalesced_frames;
- __u32 rx_coalesce_usecs_irq;
- __u32 rx_max_coalesced_frames_irq;
- __u32 tx_coalesce_usecs;
- __u32 tx_max_coalesced_frames;
- __u32 tx_coalesce_usecs_irq;
- __u32 tx_max_coalesced_frames_irq;
- __u32 stats_block_coalesce_usecs;
- __u32 use_adaptive_rx_coalesce;
- __u32 use_adaptive_tx_coalesce;
- __u32 pkt_rate_low;
- __u32 rx_coalesce_usecs_low;
- __u32 rx_max_coalesced_frames_low;
- __u32 tx_coalesce_usecs_low;
- __u32 tx_max_coalesced_frames_low;
- __u32 pkt_rate_high;
- __u32 rx_coalesce_usecs_high;
- __u32 rx_max_coalesced_frames_high;
- __u32 tx_coalesce_usecs_high;
- __u32 tx_max_coalesced_frames_high;
- __u32 rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
- __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
-
- /* Read only attributes. These indicate the maximum number
- * of pending RX/TX ring entries the driver will allow the
- * user to set.
- */
- __u32 rx_max_pending;
- __u32 rx_mini_max_pending;
- __u32 rx_jumbo_max_pending;
- __u32 tx_max_pending;
-
- /* Values changeable by the user. The valid values are
- * in the range 1 to the "*_max_pending" counterpart above.
- */
- __u32 rx_pending;
- __u32 rx_mini_pending;
- __u32 rx_jumbo_pending;
- __u32 tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- * support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
- __u32 cmd;
- __u32 max_rx;
- __u32 max_tx;
- __u32 max_other;
- __u32 max_combined;
- __u32 rx_count;
- __u32 tx_count;
- __u32 other_count;
- __u32 combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
- __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
-
- /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autoneg' here non-zero to have the
- * pause parameters be auto-negotiated too. In such a case, the
- * {rx,tx}_pause values below determine what capabilities are
- * advertised.
- *
- * If 'autoneg' is zero or the link is not being auto-negotiated,
- * then {rx,tx}_pause force the driver to use/not-use pause
- * flow control.
- */
- __u32 autoneg;
- __u32 rx_pause;
- __u32 tx_pause;
-};
-
-#define ETH_GSTRING_LEN 32
-enum ethtool_stringset {
- ETH_SS_TEST = 0,
- ETH_SS_STATS,
- ETH_SS_PRIV_FLAGS,
- ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
- ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
- __u32 cmd; /* ETHTOOL_GSTRINGS */
- __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
- __u32 len; /* number of strings in the string set */
- __u8 data[0];
-};
-
-struct ethtool_sset_info {
- __u32 cmd; /* ETHTOOL_GSSET_INFO */
- __u32 reserved;
- __u64 sset_mask; /* input: each bit selects an sset to query */
- /* output: each bit a returned sset */
- __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
- in sset_mask. One bit implies one
- __u32, two bits implies two
- __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- * only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- * test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
- ETH_TEST_FL_OFFLINE = (1 << 0),
- ETH_TEST_FL_FAILED = (1 << 1),
- ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
- ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
- __u32 cmd; /* ETHTOOL_TEST */
- __u32 flags; /* ETH_TEST_FL_xxx */
- __u32 reserved;
- __u32 len; /* result length, in number of u64 elements */
- __u64 data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
- __u32 cmd; /* ETHTOOL_GSTATS */
- __u32 n_stats; /* number of u64's being returned */
- __u64 data[0];
-};
-
-struct ethtool_perm_addr {
- __u32 cmd; /* ETHTOOL_GPERMADDR */
- __u32 size;
- __u8 data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present. When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
- ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
- ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
- ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
- ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
- ETH_FLAG_RXHASH = (1 << 28),
-};
+#include <uapi/linux/ethtool.h>
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be16 psrc;
- __be16 pdst;
- __u8 tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 spi;
- __u8 tos;
-};
-
-#define ETH_RX_NFC_IP4 1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 l4_4_bytes;
- __u8 tos;
- __u8 ip_ver;
- __u8 proto;
-};
-
-union ethtool_flow_union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[60];
-};
-
-struct ethtool_flow_ext {
- __be16 vlan_etype;
- __be16 vlan_tci;
- __be32 data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- * Note, all additional fields must be ignored unless @flow_type
- * includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- * if packets should be discarded
- * @location: Location of rule in the table. Locations must be
- * numbered such that a flow matching multiple rules will be
- * classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
- __u32 flow_type;
- union ethtool_flow_union h_u;
- struct ethtool_flow_ext h_ext;
- union ethtool_flow_union m_u;
- struct ethtool_flow_ext m_ext;
- __u64 ring_cookie;
- __u32 location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return. If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values. If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry. On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules. Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows. The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority). Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
- __u32 cmd;
- __u32 flow_type;
- __u64 data;
- struct ethtool_rx_flow_spec fs;
- __u32 rule_cnt;
- __u32 rule_locs[0];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc {
};
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- * indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values. This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
- __u32 cmd;
- __u32 size;
- __u32 ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
- __u32 flow_type;
- union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[72];
- } h_u, m_u;
-
- __u16 vlan_tag;
- __u16 vlan_tag_mask;
- __u64 data;
- __u64 data_mask;
-
- __s32 action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
- __u32 cmd;
- struct ethtool_rx_ntuple_flow_spec fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME 128
-enum ethtool_flash_op_type {
- ETHTOOL_FLASH_ALL_REGIONS = 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
- __u32 cmd;
- __u32 region;
- char data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * %ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- * get and filled in by ethtool for set operation.
- * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- * firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
- __u32 cmd;
- __u32 version;
- __u32 flag;
- __u32 len;
- __u8 data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
- __u32 available;
- __u32 requested;
- __u32 active;
- __u32 never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- * out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
- __u32 valid;
- __u32 requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively. For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
- __u32 cmd;
- __u32 so_timestamping;
- __s32 phc_index;
- __u32 tx_types;
- __u32 tx_reserved[3];
- __u32 rx_filters;
- __u32 rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- * those bits were ignored.
- * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- * resulting state of bits masked by .valid is not equal to .requested.
- * Probably there are other device-specific constraints on some features
- * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- * here as though ignored bits were cleared.
- * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- * compatibility functions. Requested offload state cannot be properly
- * managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
- ETHTOOL_F_UNSUPPORTED__BIT,
- ETHTOOL_F_WISH__BIT,
- ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
#include <linux/rculist.h>
@@ -1049,277 +248,4 @@ struct ethtool_ops {
};
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET 0x00000001 /* Get settings. */
-#define ETHTOOL_SSET 0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK 0x0000000a
-#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
- * (ethtool_value) */
-#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
- * (ethtool_value). */
-#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET ETHTOOL_GSET
-#define SPARC_ETH_SSET ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half (1 << 0)
-#define SUPPORTED_10baseT_Full (1 << 1)
-#define SUPPORTED_100baseT_Half (1 << 2)
-#define SUPPORTED_100baseT_Full (1 << 3)
-#define SUPPORTED_1000baseT_Half (1 << 4)
-#define SUPPORTED_1000baseT_Full (1 << 5)
-#define SUPPORTED_Autoneg (1 << 6)
-#define SUPPORTED_TP (1 << 7)
-#define SUPPORTED_AUI (1 << 8)
-#define SUPPORTED_MII (1 << 9)
-#define SUPPORTED_FIBRE (1 << 10)
-#define SUPPORTED_BNC (1 << 11)
-#define SUPPORTED_10000baseT_Full (1 << 12)
-#define SUPPORTED_Pause (1 << 13)
-#define SUPPORTED_Asym_Pause (1 << 14)
-#define SUPPORTED_2500baseX_Full (1 << 15)
-#define SUPPORTED_Backplane (1 << 16)
-#define SUPPORTED_1000baseKX_Full (1 << 17)
-#define SUPPORTED_10000baseKX4_Full (1 << 18)
-#define SUPPORTED_10000baseKR_Full (1 << 19)
-#define SUPPORTED_10000baseR_FEC (1 << 20)
-#define SUPPORTED_20000baseMLD2_Full (1 << 21)
-#define SUPPORTED_20000baseKR2_Full (1 << 22)
-#define SUPPORTED_40000baseKR4_Full (1 << 23)
-#define SUPPORTED_40000baseCR4_Full (1 << 24)
-#define SUPPORTED_40000baseSR4_Full (1 << 25)
-#define SUPPORTED_40000baseLR4_Full (1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half (1 << 0)
-#define ADVERTISED_10baseT_Full (1 << 1)
-#define ADVERTISED_100baseT_Half (1 << 2)
-#define ADVERTISED_100baseT_Full (1 << 3)
-#define ADVERTISED_1000baseT_Half (1 << 4)
-#define ADVERTISED_1000baseT_Full (1 << 5)
-#define ADVERTISED_Autoneg (1 << 6)
-#define ADVERTISED_TP (1 << 7)
-#define ADVERTISED_AUI (1 << 8)
-#define ADVERTISED_MII (1 << 9)
-#define ADVERTISED_FIBRE (1 << 10)
-#define ADVERTISED_BNC (1 << 11)
-#define ADVERTISED_10000baseT_Full (1 << 12)
-#define ADVERTISED_Pause (1 << 13)
-#define ADVERTISED_Asym_Pause (1 << 14)
-#define ADVERTISED_2500baseX_Full (1 << 15)
-#define ADVERTISED_Backplane (1 << 16)
-#define ADVERTISED_1000baseKX_Full (1 << 17)
-#define ADVERTISED_10000baseKX4_Full (1 << 18)
-#define ADVERTISED_10000baseKR_Full (1 << 19)
-#define ADVERTISED_10000baseR_FEC (1 << 20)
-#define ADVERTISED_20000baseMLD2_Full (1 << 21)
-#define ADVERTISED_20000baseKR2_Full (1 << 22)
-#define ADVERTISED_40000baseKR4_Full (1 << 23)
-#define ADVERTISED_40000baseCR4_Full (1 << 24)
-#define ADVERTISED_40000baseSR4_Full (1 << 25)
-#define ADVERTISED_40000baseLR4_Full (1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things. When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define SPEED_2500 2500
-#define SPEED_10000 10000
-#define SPEED_UNKNOWN -1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF 0x00
-#define DUPLEX_FULL 0x01
-#define DUPLEX_UNKNOWN 0xff
-
-/* Which connector port. */
-#define PORT_TP 0x00
-#define PORT_AUI 0x01
-#define PORT_MII 0x02
-#define PORT_FIBRE 0x03
-#define PORT_BNC 0x04
-#define PORT_DA 0x05
-#define PORT_NONE 0xef
-#define PORT_OTHER 0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL 0x00
-#define XCVR_EXTERNAL 0x01
-#define XCVR_DUMMY1 0x02
-#define XCVR_DUMMY2 0x03
-#define XCVR_DUMMY3 0x04
-
-/* Enable or disable autonegotiation. If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE 0x00
-#define AUTONEG_ENABLE 0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
-#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
-#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY (1 << 0)
-#define WAKE_UCAST (1 << 1)
-#define WAKE_MCAST (1 << 2)
-#define WAKE_BCAST (1 << 3)
-#define WAKE_ARP (1 << 4)
-#define WAKE_MAGIC (1 << 5)
-#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
-#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
-#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
-#define AH_ESP_V4_FLOW 0x04 /* hash only */
-#define TCP_V6_FLOW 0x05 /* hash only */
-#define UDP_V6_FLOW 0x06 /* hash only */
-#define SCTP_V6_FLOW 0x07 /* hash only */
-#define AH_ESP_V6_FLOW 0x08 /* hash only */
-#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
-#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
-#define AH_V6_FLOW 0x0b /* hash only */
-#define ESP_V6_FLOW 0x0c /* hash only */
-#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
-#define IPV4_FLOW 0x10 /* hash only */
-#define IPV6_FLOW 0x11 /* hash only */
-#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define FLOW_EXT 0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define RXH_L2DA (1 << 1)
-#define RXH_VLAN (1 << 2)
-#define RXH_L3_PROTO (1 << 3)
-#define RXH_IP_SRC (1 << 4)
-#define RXH_IP_DST (1 << 5)
-#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define RXH_DISCARD (1 << 31)
-
-#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
-#define RX_CLS_LOC_ANY 0xffffffff
-#define RX_CLS_LOC_FIRST 0xfffffffe
-#define RX_CLS_LOC_LAST 0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079 0x1
-#define ETH_MODULE_SFF_8079_LEN 256
-#define ETH_MODULE_SFF_8472 0x2
-#define ETH_MODULE_SFF_8472_LEN 512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset. On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently. The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
- /* These flags represent components dedicated to the interface
- * the command is addressed to. Shift any flag left by
- * ETH_RESET_SHARED_SHIFT to reset a shared component of the
- * same type.
- */
- ETH_RESET_MGMT = 1 << 0, /* Management processor */
- ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
- ETH_RESET_DMA = 1 << 2, /* DMA engine */
- ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
- ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
- ETH_RESET_MAC = 1 << 5, /* Media access controller */
- ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
- ETH_RESET_RAM = 1 << 7, /* RAM shared between
- * multiple components */
-
- ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
- * this interface */
- ETH_RESET_ALL = 0xffffffff, /* All components used by this
- * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT 16
-
#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 41085d0..6daf6d4 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -10,59 +10,11 @@
* Davide Libenzi <davidel@xmailserver.org>
*
*/
-
#ifndef _LINUX_EVENTPOLL_H
#define _LINUX_EVENTPOLL_H
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/* Flags for epoll_create1. */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_BLOCK_SUSPEND
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
+#include <uapi/linux/eventpoll.h>
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/*
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
- __u32 events;
- __u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
/* Forward declarations to avoid compiler errors */
struct file;
@@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {}
#endif
-#endif /* #ifdef __KERNEL__ */
-
#endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
deleted file mode 100644
index e8e7471..0000000
--- a/include/linux/fadvise.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef FADVISE_H_INCLUDED
-#define FADVISE_H_INCLUDED
-
-#define POSIX_FADV_NORMAL 0 /* No further special treatment. */
-#define POSIX_FADV_RANDOM 1 /* Expect random page references. */
-#define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */
-#define POSIX_FADV_WILLNEED 3 /* Will need these pages. */
-
-/*
- * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
- * for s390-64 differ from the values for the rest of the world.
- */
-#if defined(__s390x__)
-#define POSIX_FADV_DONTNEED 6 /* Don't need these pages. */
-#define POSIX_FADV_NOREUSE 7 /* Data will be accessed once. */
-#else
-#define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */
-#define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */
-#endif
-
-#endif /* FADVISE_H_INCLUDED */
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index d39b824..3159168 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -1,11 +1,8 @@
#ifndef _FALLOC_H_
#define _FALLOC_H_
-#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */
-#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */
+#include <uapi/linux/falloc.h>
-#ifdef __KERNEL__
/*
* Space reservation ioctls and argument structure
@@ -24,6 +21,4 @@ struct space_resv {
#define FS_IOC_RESVSP _IOW('X', 40, struct space_resv)
#define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv)
-#endif /* __KERNEL__ */
-
#endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 6c6133f..cef93dd 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -1,120 +1,8 @@
#ifndef _LINUX_FANOTIFY_H
#define _LINUX_FANOTIFY_H
-#include <linux/types.h>
+#include <uapi/linux/fanotify.h>
-/* the following events that user-space can register for */
-#define FAN_ACCESS 0x00000001 /* File was accessed */
-#define FAN_MODIFY 0x00000002 /* File was modified */
-#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */
-#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
-#define FAN_OPEN 0x00000020 /* File was opened */
-
-#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
-
-#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
-#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
-
-#define FAN_ONDIR 0x40000000 /* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC 0x00000001
-#define FAN_NONBLOCK 0x00000002
-
-/* These are NOT bitwise flags. Both bits are used togther. */
-#define FAN_CLASS_NOTIF 0x00000000
-#define FAN_CLASS_CONTENT 0x00000004
-#define FAN_CLASS_PRE_CONTENT 0x00000008
-#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
- FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE 0x00000010
-#define FAN_UNLIMITED_MARKS 0x00000020
-
-#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \
- FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
- FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD 0x00000001
-#define FAN_MARK_REMOVE 0x00000002
-#define FAN_MARK_DONT_FOLLOW 0x00000004
-#define FAN_MARK_ONLYDIR 0x00000008
-#define FAN_MARK_MOUNT 0x00000010
-#define FAN_MARK_IGNORED_MASK 0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
-#define FAN_MARK_FLUSH 0x00000080
-#ifdef __KERNEL__
/* not valid from userspace, only kernel internal */
#define FAN_MARK_ONDIR 0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
- FAN_MARK_REMOVE |\
- FAN_MARK_DONT_FOLLOW |\
- FAN_MARK_ONLYDIR |\
- FAN_MARK_MOUNT |\
- FAN_MARK_IGNORED_MASK |\
- FAN_MARK_IGNORED_SURV_MODIFY |\
- FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility. Apps will get only the
- * events that they originally wanted. Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
- FAN_MODIFY |\
- FAN_CLOSE |\
- FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
- FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
- FAN_ALL_PERM_EVENTS |\
- FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION 3
-
-struct fanotify_event_metadata {
- __u32 event_len;
- __u8 vers;
- __u8 reserved;
- __u16 metadata_len;
- __aligned_u64 mask;
- __s32 fd;
- __s32 pid;
-};
-
-struct fanotify_response {
- __s32 fd;
- __u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW 0x01
-#define FAN_DENY 0x02
-/* No fd set in event */
-#define FAN_NOFD -1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
- (struct fanotify_event_metadata*)(((char *)(meta)) + \
- (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
- (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
- (long)(meta)->event_len <= (long)(len))
-
#endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c6..c7a9571 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,409 +1,10 @@
#ifndef _LINUX_FB_H
#define _LINUX_FB_H
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
#include <linux/kgdb.h>
-#endif /* __KERNEL__ */
+#include <uapi/linux/fb.h>
-/* Definitions of frame buffers */
-
-#define FB_MAX 32 /* sufficient for now */
-
-/* ioctls
- 0x46 is 'F' */
-#define FBIOGET_VSCREENINFO 0x4600
-#define FBIOPUT_VSCREENINFO 0x4601
-#define FBIOGET_FSCREENINFO 0x4602
-#define FBIOGETCMAP 0x4604
-#define FBIOPUTCMAP 0x4605
-#define FBIOPAN_DISPLAY 0x4606
-#ifdef __KERNEL__
#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC 0x460C */
-/* #define FBIOPUT_MONITORSPEC 0x460D */
-/* #define FBIOSWITCH_MONIBIT 0x460E */
-#define FBIOGET_CON2FBMAP 0x460F
-#define FBIOPUT_CON2FBMAP 0x4610
-#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC 0x4613
-#define FBIO_FREE 0x4614
-#define FBIOGET_GLYPH 0x4615
-#define FBIOGET_HWCINFO 0x4616
-#define FBIOPUT_MODEINFO 0x4617
-#define FBIOGET_DISPINFO 0x4618
-#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */
-#define FB_TYPE_PLANES 1 /* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */
-#define FB_TYPE_TEXT 3 /* Text/attributes */
-#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */
-#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA 0 /* Monochrome text */
-#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR 2 /* True color */
-#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */
-#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE 0 /* no hardware accelerator */
-#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */
-#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */
-#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */
-#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */
-#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */
-#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */
-#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */
-#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */
-#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */
-#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */
-#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */
-#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */
-#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */
-#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */
-#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */
-#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */
-#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */
-#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */
-#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */
-#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */
-#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */
-#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */
-#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */
-#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */
-#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */
-#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */
-#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */
-#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */
-#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */
-#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */
-#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */
-#define FB_ACCEL_I810 39 /* Intel 810/815 */
-#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */
-#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */
-#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */
-#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */
-#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */
-#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */
-#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */
-#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */
-#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */
-#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */
-#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */
-#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */
-#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
-#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
-#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */
-#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
-#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
-#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
-#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */
-#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */
-#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */
-#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
-#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
-#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
-#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
-
-#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
-#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
-#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */
-#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */
-#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */
-#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */
-#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */
-#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */
-#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */
-#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */
-#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */
-#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */
-#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */
-#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
-
-#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
-
-#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
- char id[16]; /* identification string eg "TT Builtin" */
- unsigned long smem_start; /* Start of frame buffer mem */
- /* (physical address) */
- __u32 smem_len; /* Length of frame buffer mem */
- __u32 type; /* see FB_TYPE_* */
- __u32 type_aux; /* Interleave for interleaved Planes */
- __u32 visual; /* see FB_VISUAL_* */
- __u16 xpanstep; /* zero if no hardware panning */
- __u16 ypanstep; /* zero if no hardware panning */
- __u16 ywrapstep; /* zero if no hardware ywrap */
- __u32 line_length; /* length of a line in bytes */
- unsigned long mmio_start; /* Start of Memory Mapped I/O */
- /* (physical address) */
- __u32 mmio_len; /* Length of Memory Mapped I/O */
- __u32 accel; /* Indicate to driver which */
- /* specific chip/card we have */
- __u16 capabilities; /* see FB_CAP_* */
- __u16 reserved[2]; /* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
- __u32 offset; /* beginning of bitfield */
- __u32 length; /* length of bitfield */
- __u32 msb_right; /* != 0 : Most significant bit is */
- /* right */
-};
-
-#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
-#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */
-#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */
-#define FB_ACTIVATE_MASK 15
- /* values */
-#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */
-#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */
-#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */
-#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */
-
-#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
-#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
-#define FB_SYNC_EXT 4 /* external sync */
-#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
-#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
- /* vtotal = 144d/288n/576i => PAL */
- /* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN 32 /* sync on green */
-
-#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
-#define FB_VMODE_INTERLACED 1 /* interlaced */
-#define FB_VMODE_DOUBLE 2 /* double scan */
-#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */
-#define FB_VMODE_MASK 255
-
-#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
-#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR 0
-#define FB_ROTATE_CW 1
-#define FB_ROTATE_UD 2
-#define FB_ROTATE_CCW 3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
- __u32 xres; /* visible resolution */
- __u32 yres;
- __u32 xres_virtual; /* virtual resolution */
- __u32 yres_virtual;
- __u32 xoffset; /* offset from virtual to visible */
- __u32 yoffset; /* resolution */
-
- __u32 bits_per_pixel; /* guess what */
- __u32 grayscale; /* 0 = color, 1 = grayscale, */
- /* >1 = FOURCC */
- struct fb_bitfield red; /* bitfield in fb mem if true color, */
- struct fb_bitfield green; /* else only length is significant */
- struct fb_bitfield blue;
- struct fb_bitfield transp; /* transparency */
-
- __u32 nonstd; /* != 0 Non standard pixel format */
-
- __u32 activate; /* see FB_ACTIVATE_* */
-
- __u32 height; /* height of picture in mm */
- __u32 width; /* width of picture in mm */
-
- __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
-
- /* Timing: All values in pixclocks, except pixclock (of course) */
- __u32 pixclock; /* pixel clock in ps (pico seconds) */
- __u32 left_margin; /* time from sync to picture */
- __u32 right_margin; /* time from picture to sync */
- __u32 upper_margin; /* time from sync to picture */
- __u32 lower_margin;
- __u32 hsync_len; /* length of horizontal sync */
- __u32 vsync_len; /* length of vertical sync */
- __u32 sync; /* see FB_SYNC_* */
- __u32 vmode; /* see FB_VMODE_* */
- __u32 rotate; /* angle we rotate counter clockwise */
- __u32 colorspace; /* colorspace for FOURCC-based modes */
- __u32 reserved[4]; /* Reserved for future compatibility */
-};
-
-struct fb_cmap {
- __u32 start; /* First entry */
- __u32 len; /* Number of entries */
- __u16 *red; /* Red values */
- __u16 *green;
- __u16 *blue;
- __u16 *transp; /* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
- __u32 console;
- __u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING 0
-#define VESA_VSYNC_SUSPEND 1
-#define VESA_HSYNC_SUSPEND 2
-#define VESA_POWERDOWN 3
-
-
-enum {
- /* screen: unblanked, hsync: on, vsync: on */
- FB_BLANK_UNBLANK = VESA_NO_BLANKING,
-
- /* screen: blanked, hsync: on, vsync: on */
- FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
-
- /* screen: blanked, hsync: on, vsync: off */
- FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
- /* screen: blanked, hsync: off, vsync: on */
- FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
- /* screen: blanked, hsync: off, vsync: off */
- FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */
-#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */
-
-struct fb_vblank {
- __u32 flags; /* FB_VBLANK flags */
- __u32 count; /* counter of retraces since boot */
- __u32 vcount; /* current scanline position */
- __u32 hcount; /* current scandot position */
- __u32 reserved[4]; /* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR 1
-
-struct fb_copyarea {
- __u32 dx;
- __u32 dy;
- __u32 width;
- __u32 height;
- __u32 sx;
- __u32 sy;
-};
-
-struct fb_fillrect {
- __u32 dx; /* screen-relative */
- __u32 dy;
- __u32 width;
- __u32 height;
- __u32 color;
- __u32 rop;
-};
-
-struct fb_image {
- __u32 dx; /* Where to place image */
- __u32 dy;
- __u32 width; /* Size of image */
- __u32 height;
- __u32 fg_color; /* Only used when a mono bitmap */
- __u32 bg_color;
- __u8 depth; /* Depth of the image */
- const char *data; /* Pointer to image data */
- struct fb_cmap cmap; /* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS 0x02
-#define FB_CUR_SETHOT 0x04
-#define FB_CUR_SETCMAP 0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE 0x20
-#define FB_CUR_SETALL 0xFF
-
-struct fbcurpos {
- __u16 x, y;
-};
-
-struct fb_cursor {
- __u16 set; /* what to set */
- __u16 enable; /* cursor on/off */
- __u16 rop; /* bitop operation */
- const char *mask; /* cursor mask bits */
- struct fbcurpos hot; /* cursor hot spot */
- struct fb_image image; /* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS 128
-#define FB_BACKLIGHT_MAX 0xFF
-#endif
-
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/init.h>
@@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
const struct fb_videomode *default_mode,
unsigned int default_bpp);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_FB_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index f550f89..76ce329 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -1,54 +1,8 @@
#ifndef _LINUX_FCNTL_H
#define _LINUX_FCNTL_H
-#include <asm/fcntl.h>
+#include <uapi/linux/fcntl.h>
-#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS 0x00000001 /* File accessed */
-#define DN_MODIFY 0x00000002 /* File modified */
-#define DN_CREATE 0x00000004 /* File created */
-#define DN_DELETE 0x00000008 /* File removed */
-#define DN_RENAME 0x00000010 /* File renamed */
-#define DN_ATTRIB 0x00000020 /* File changed attibutes */
-#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */
-
-#define AT_FDCWD -100 /* Special value used to indicate
- openat should use the current
- working directory. */
-#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */
-#define AT_REMOVEDIR 0x200 /* Remove directory instead of
- unlinking file. */
-#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */
-#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */
-
-#ifdef __KERNEL__
#ifndef force_o_largefile
#define force_o_largefile() (BITS_PER_LONG != 32)
@@ -74,6 +28,4 @@
#define IS_SETLK(cmd) (IS_SETLK32(cmd) || IS_SETLK64(cmd))
#define IS_SETLKW(cmd) (IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
index 72202b1..69275bc 100644
--- a/include/linux/fd.h
+++ b/include/linux/fd.h
@@ -1,384 +1,8 @@
#ifndef _LINUX_FD_H
#define _LINUX_FD_H
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
+#include <uapi/linux/fd.h>
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
- unsigned int size, /* nr of sectors total */
- sect, /* sectors per track */
- head, /* nr of heads */
- track, /* nr of tracks */
- stretch; /* bit 0 !=0 means double track steps */
- /* bit 1 != 0 means swap sides */
- /* bits 2..9 give the first sector */
- /* number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
- unsigned char gap, /* gap1 size */
-
- rate, /* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
- 512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
- spec1, /* stepping rate, head unload time */
- fmt_gap; /* gap2 size */
- const char * name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define FDMSGON _IO(2,0x45)
-#define FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/*
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
- unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
- unsigned int
- abort, /* number of errors to be reached before aborting */
- read_track, /* maximal number of errors permitted to read an
- * entire track at once */
- reset, /* maximal number of errors before a reset is tried */
- recal, /* maximal number of errors before a recalibrate is
- * tried */
-
- /*
- * Threshold for reporting FDC errors to the console.
- * Setting this to zero may flood your screen when using
- * ultra cheap floppies ;-)
- */
- reporting;
-
-};
-
-#define FDSETEMSGTRESH _IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
- signed char cmos; /* CMOS type */
-
- /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
- * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
- */
- unsigned long max_dtr; /* Step rate, usec */
- unsigned long hlt; /* Head load/settle time, msec */
- unsigned long hut; /* Head unload time (remnant of
- * 8" drives) */
- unsigned long srt; /* Step rate, usec */
-
- unsigned long spinup; /* time needed for spinup (expressed
- * in jiffies) */
- unsigned long spindown; /* timeout needed for spindown */
- unsigned char spindown_offset; /* decides in which position the disk
- * will stop */
- unsigned char select_delay; /* delay to wait after select */
- unsigned char rps; /* rotations per second */
- unsigned char tracks; /* maximum number of tracks */
- unsigned long timeout; /* timeout for interrupt requests */
-
- unsigned char interleave_sect; /* if there are more sectors, use
- * interleave */
-
- struct floppy_max_errors max_errors;
-
- char flags; /* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
- considerations */
-
- char read_track; /* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
- short autodetect[8]; /* autodetected formats */
-
- int checkfreq; /* how often should the drive be checked for disk
- * changes */
- int native_format; /* native format of this drive */
-};
-
-enum {
- FD_NEED_TWADDLE_BIT, /* more magic */
- FD_VERIFY_BIT, /* inquire for write protection */
- FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet
- * to clear media change status */
- FD_UNUSED_BIT,
- FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */
- FD_DISK_WRITABLE_BIT /* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
- unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
- unsigned long spinup_date;
- unsigned long select_date;
- unsigned long first_read_date;
- short probed_format;
- short track; /* current track */
- short maxblock; /* id of highest block read */
- short maxtrack; /* id of highest half track read */
- int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
- int keep_data;
-
- /* Prevent "aliased" accesses. */
- int fd_ref;
- int fd_device;
- unsigned long last_checked; /* when was the drive last checked for a disk
- * change? */
-
- char *dmabuf;
- int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
- FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */
- FD_RESET_IF_RAWCMD, /* obsolete */
- FD_RESET_ALWAYS /* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {
- int spec1; /* spec1 value last used */
- int spec2; /* spec2 value last used */
- int dtr;
- unsigned char version; /* FDC version code */
- unsigned char dor;
- unsigned long address; /* io address */
- unsigned int rawcmd:2;
- unsigned int reset:1;
- unsigned int need_configure:1;
- unsigned int perp_mode:2;
- unsigned int has_fifo:1;
- unsigned int driver_version; /* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
- unsigned char track[4];
- /* Position of the heads of the 4 units attached to this FDC,
- * as stored on the FDC. In the future, the position as stored
- * on the FDC might not agree with the actual physical
- * position of these drive heads. By allowing such
- * disagreement, it will be possible to reset the FDC without
- * incurring the expensive cost of repositioning all heads.
- * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
- /* Write error logging.
- *
- * These fields can be cleared with the FDWERRORCLR ioctl.
- * Only writes that were attempted but failed due to a physical media
- * error are logged. write(2) calls that fail and return an error code
- * to the user process are not counted.
- */
-
- unsigned int write_errors; /* number of physical write errors
- * encountered */
-
- /* position of first and last write errors */
- unsigned long first_error_sector;
- int first_error_generation;
- unsigned long last_error_sector;
- int last_error_generation;
-
- unsigned int badness; /* highest retry count for a read or write
- * operation */
-};
-
-#define FDWERRORCLR _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
- unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8 /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
- * completion */
-#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100 /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
- * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
- void __user *data;
- char *kernel_data; /* location of data buffer in the kernel */
- struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
- * within the kernel */
- long length; /* in: length of dma transfer. out: remaining bytes */
- long phys_length; /* physical length, if different from dma length */
- int buffer_length; /* length of allocated buffer */
-
- unsigned char rate;
- unsigned char cmd_count;
- unsigned char cmd[16];
- unsigned char reply_count;
- unsigned char reply[16];
- int track;
- int resultcode;
-
- int reserved1;
- int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -398,5 +22,3 @@ struct compat_floppy_struct {
#define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
#endif
#endif
-
-#endif
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
deleted file mode 100644
index 61ce641..0000000
--- a/include/linux/fdreg.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef _LINUX_FDREG_H
-#define _LINUX_FDREG_H
-/*
- * This file contains some defines for the floppy disk controller.
- * Various sources. Mostly "IBM Microcomputers: A Programmers
- * Handbook", Sanches and Canton.
- */
-
-#ifdef FDPATCHES
-#define FD_IOPORT fdc_state[fdc].address
-#else
-/* It would be a lot saner just to force fdc_state[fdc].address to always
- be set ! FIXME */
-#define FD_IOPORT 0x3f0
-#endif
-
-/* Fd controller regs. S&C, about page 340 */
-#define FD_STATUS (4 + FD_IOPORT )
-#define FD_DATA (5 + FD_IOPORT )
-
-/* Digital Output Register */
-#define FD_DOR (2 + FD_IOPORT )
-
-/* Digital Input Register (read) */
-#define FD_DIR (7 + FD_IOPORT )
-
-/* Diskette Control Register (write)*/
-#define FD_DCR (7 + FD_IOPORT )
-
-/* Bits of main status register */
-#define STATUS_BUSYMASK 0x0F /* drive busy mask */
-#define STATUS_BUSY 0x10 /* FDC busy */
-#define STATUS_DMA 0x20 /* 0- DMA mode */
-#define STATUS_DIR 0x40 /* 0- cpu->fdc */
-#define STATUS_READY 0x80 /* Data reg ready */
-
-/* Bits of FD_ST0 */
-#define ST0_DS 0x03 /* drive select mask */
-#define ST0_HA 0x04 /* Head (Address) */
-#define ST0_NR 0x08 /* Not Ready */
-#define ST0_ECE 0x10 /* Equipment check error */
-#define ST0_SE 0x20 /* Seek end */
-#define ST0_INTR 0xC0 /* Interrupt code mask */
-
-/* Bits of FD_ST1 */
-#define ST1_MAM 0x01 /* Missing Address Mark */
-#define ST1_WP 0x02 /* Write Protect */
-#define ST1_ND 0x04 /* No Data - unreadable */
-#define ST1_OR 0x10 /* OverRun */
-#define ST1_CRC 0x20 /* CRC error in data or addr */
-#define ST1_EOC 0x80 /* End Of Cylinder */
-
-/* Bits of FD_ST2 */
-#define ST2_MAM 0x01 /* Missing Address Mark (again) */
-#define ST2_BC 0x02 /* Bad Cylinder */
-#define ST2_SNS 0x04 /* Scan Not Satisfied */
-#define ST2_SEH 0x08 /* Scan Equal Hit */
-#define ST2_WC 0x10 /* Wrong Cylinder */
-#define ST2_CRC 0x20 /* CRC error in data field */
-#define ST2_CM 0x40 /* Control Mark = deleted */
-
-/* Bits of FD_ST3 */
-#define ST3_HA 0x04 /* Head (Address) */
-#define ST3_DS 0x08 /* drive is double-sided */
-#define ST3_TZ 0x10 /* Track Zero signal (1=track 0) */
-#define ST3_RY 0x20 /* drive is ready */
-#define ST3_WP 0x40 /* Write Protect */
-#define ST3_FT 0x80 /* Drive Fault */
-
-/* Values for FD_COMMAND */
-#define FD_RECALIBRATE 0x07 /* move to track 0 */
-#define FD_SEEK 0x0F /* seek track */
-#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
-#define FD_WRITE 0xC5 /* write with MT, MFM */
-#define FD_SENSEI 0x08 /* Sense Interrupt Status */
-#define FD_SPECIFY 0x03 /* specify HUT etc */
-#define FD_FORMAT 0x4D /* format one track */
-#define FD_VERSION 0x10 /* get version code */
-#define FD_CONFIGURE 0x13 /* configure FIFO operation */
-#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
-#define FD_GETSTATUS 0x04 /* read ST3 */
-#define FD_DUMPREGS 0x0E /* dump the contents of the fdc regs */
-#define FD_READID 0xEA /* prints the header of a sector */
-#define FD_UNLOCK 0x14 /* Fifo config unlock */
-#define FD_LOCK 0x94 /* Fifo config lock */
-#define FD_RSEEK_OUT 0x8f /* seek out (i.e. to lower tracks) */
-#define FD_RSEEK_IN 0xcf /* seek in (i.e. to higher tracks) */
-
-/* the following commands are new in the 82078. They are not used in the
- * floppy driver, except the first three. These commands may be useful for apps
- * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
- * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
-
-#define FD_PARTID 0x18 /* part id ("extended" version cmd) */
-#define FD_SAVE 0x2e /* save fdc regs for later restore */
-#define FD_DRIVESPEC 0x8e /* drive specification: Access to the
- * 2 Mbps data transfer rate for tape
- * drives */
-
-#define FD_RESTORE 0x4e /* later restore */
-#define FD_POWERDOWN 0x27 /* configure FDC's powersave features */
-#define FD_FORMAT_N_WRITE 0xef /* format and write in one go. */
-#define FD_OPTION 0x33 /* ISO format (which is a clean way to
- * pack more sectors on a track) */
-
-/* DMA commands */
-#define DMA_READ 0x46
-#define DMA_WRITE 0x4A
-
-/* FDC version return types */
-#define FDC_NONE 0x00
-#define FDC_UNKNOWN 0x10 /* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
- FAILS EARLY */
-#define FDC_8272A 0x20 /* Intel 8272a, NEC 765 */
-#define FDC_765ED 0x30 /* Non-Intel 1MB-compatible FDC, can't detect */
-#define FDC_82072 0x40 /* Intel 82072; 8272a + FIFO + DUMPREGS */
-#define FDC_82072A 0x45 /* 82072A (on Sparcs) */
-#define FDC_82077_ORIG 0x51 /* Original version of 82077AA, sans LOCK */
-#define FDC_82077 0x52 /* 82077AA-1 */
-#define FDC_82078_UNKN 0x5f /* Unknown 82078 variant */
-#define FDC_82078 0x60 /* 44pin 82078 or 64pin 82078SL */
-#define FDC_82078_1 0x61 /* 82078-1 (2Mbps fdc) */
-#define FDC_S82078B 0x62 /* S82078B (first seen on Adaptec AVA-2825 VLB
- * SCSI/EIDE/Floppy controller) */
-#define FDC_87306 0x63 /* National Semiconductor PC 87306 */
-
-/*
- * Beware: the fdc type list is roughly sorted by increasing features.
- * Presence of features is tested by comparing the FDC version id with the
- * "oldest" version that has the needed feature.
- * If during FDC detection, an obscure test fails late in the sequence, don't
- * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
- * This is especially true if the tests are unneeded.
- */
-
-#define FD_RESET_DELAY 20
-#endif
diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
deleted file mode 100644
index 51da65b..0000000
--- a/include/linux/fib_rules.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_FIB_RULES_H
-#define __LINUX_FIB_RULES_H
-
-#include <linux/types.h>
-#include <linux/rtnetlink.h>
-
-/* rule is permanent, and cannot be deleted */
-#define FIB_RULE_PERMANENT 0x00000001
-#define FIB_RULE_INVERT 0x00000002
-#define FIB_RULE_UNRESOLVED 0x00000004
-#define FIB_RULE_IIF_DETACHED 0x00000008
-#define FIB_RULE_DEV_DETACHED FIB_RULE_IIF_DETACHED
-#define FIB_RULE_OIF_DETACHED 0x00000010
-
-/* try to find source address in routing lookups */
-#define FIB_RULE_FIND_SADDR 0x00010000
-
-struct fib_rule_hdr {
- __u8 family;
- __u8 dst_len;
- __u8 src_len;
- __u8 tos;
-
- __u8 table;
- __u8 res1; /* reserved */
- __u8 res2; /* reserved */
- __u8 action;
-
- __u32 flags;
-};
-
-enum {
- FRA_UNSPEC,
- FRA_DST, /* destination address */
- FRA_SRC, /* source address */
- FRA_IIFNAME, /* interface name */
-#define FRA_IFNAME FRA_IIFNAME
- FRA_GOTO, /* target to jump to (FR_ACT_GOTO) */
- FRA_UNUSED2,
- FRA_PRIORITY, /* priority/preference */
- FRA_UNUSED3,
- FRA_UNUSED4,
- FRA_UNUSED5,
- FRA_FWMARK, /* mark */
- FRA_FLOW, /* flow/class id */
- FRA_UNUSED6,
- FRA_UNUSED7,
- FRA_UNUSED8,
- FRA_TABLE, /* Extended table id */
- FRA_FWMASK, /* mask for netfilter mark */
- FRA_OIFNAME,
- __FRA_MAX
-};
-
-#define FRA_MAX (__FRA_MAX - 1)
-
-enum {
- FR_ACT_UNSPEC,
- FR_ACT_TO_TBL, /* Pass to fixed table */
- FR_ACT_GOTO, /* Jump to another rule */
- FR_ACT_NOP, /* No operation */
- FR_ACT_RES3,
- FR_ACT_RES4,
- FR_ACT_BLACKHOLE, /* Drop without notification */
- FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */
- FR_ACT_PROHIBIT, /* Drop with EACCES */
- __FR_ACT_MAX,
-};
-
-#define FR_ACT_MAX (__FR_ACT_MAX - 1)
-
-#endif
diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
deleted file mode 100644
index d830747..0000000
--- a/include/linux/fiemap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * FS_IOC_FIEMAP ioctl infrastructure.
- *
- * Some portions copyright (C) 2007 Cluster File Systems, Inc
- *
- * Authors: Mark Fasheh <mfasheh@suse.com>
- * Kalpak Shah <kalpak.shah@sun.com>
- * Andreas Dilger <adilger@sun.com>
- */
-
-#ifndef _LINUX_FIEMAP_H
-#define _LINUX_FIEMAP_H
-
-#include <linux/types.h>
-
-struct fiemap_extent {
- __u64 fe_logical; /* logical offset in bytes for the start of
- * the extent from the beginning of the file */
- __u64 fe_physical; /* physical offset in bytes for the start
- * of the extent from the beginning of the disk */
- __u64 fe_length; /* length in bytes for this extent */
- __u64 fe_reserved64[2];
- __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */
- __u32 fe_reserved[3];
-};
-
-struct fiemap {
- __u64 fm_start; /* logical offset (inclusive) at
- * which to start mapping (in) */
- __u64 fm_length; /* logical length of mapping which
- * userspace wants (in) */
- __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */
- __u32 fm_mapped_extents;/* number of extents that were mapped (out) */
- __u32 fm_extent_count; /* size of fm_extents array (in) */
- __u32 fm_reserved;
- struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
-};
-
-#define FIEMAP_MAX_OFFSET (~0ULL)
-
-#define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */
-#define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */
-
-#define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
-
-#define FIEMAP_EXTENT_LAST 0x00000001 /* Last extent in file. */
-#define FIEMAP_EXTENT_UNKNOWN 0x00000002 /* Data location unknown. */
-#define FIEMAP_EXTENT_DELALLOC 0x00000004 /* Location still pending.
- * Sets EXTENT_UNKNOWN. */
-#define FIEMAP_EXTENT_ENCODED 0x00000008 /* Data can not be read
- * while fs is unmounted */
-#define FIEMAP_EXTENT_DATA_ENCRYPTED 0x00000080 /* Data is encrypted by fs.
- * Sets EXTENT_NO_BYPASS. */
-#define FIEMAP_EXTENT_NOT_ALIGNED 0x00000100 /* Extent offsets may not be
- * block aligned. */
-#define FIEMAP_EXTENT_DATA_INLINE 0x00000200 /* Data mixed with metadata.
- * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_DATA_TAIL 0x00000400 /* Multiple files in block.
- * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_UNWRITTEN 0x00000800 /* Space allocated, but
- * no data (i.e. zero). */
-#define FIEMAP_EXTENT_MERGED 0x00001000 /* File does not natively
- * support extents. Result
- * merged for efficiency. */
-#define FIEMAP_EXTENT_SHARED 0x00002000 /* Space shared with other
- * files. */
-
-#endif /* _LINUX_FIEMAP_H */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 2ded090..24d251f 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1,141 +1,12 @@
/*
* Linux Socket Filter Data Structures
*/
-
#ifndef __LINUX_FILTER_H__
#define __LINUX_FILTER_H__
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
#include <linux/compat.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * Try and keep these values and structures similar to BSD, especially
- * the BPF code definitions which need to match so you can share filters
- */
-
-struct sock_filter { /* Filter block */
- __u16 code; /* Actual filter code */
- __u8 jt; /* Jump true */
- __u8 jf; /* Jump false */
- __u32 k; /* Generic multiuse field */
-};
-
-struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
- unsigned short len; /* Number of filter blocks */
- struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define BPF_LD 0x00
-#define BPF_LDX 0x01
-#define BPF_ST 0x02
-#define BPF_STX 0x03
-#define BPF_ALU 0x04
-#define BPF_JMP 0x05
-#define BPF_RET 0x06
-#define BPF_MISC 0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code) ((code) & 0x18)
-#define BPF_W 0x00
-#define BPF_H 0x08
-#define BPF_B 0x10
-#define BPF_MODE(code) ((code) & 0xe0)
-#define BPF_IMM 0x00
-#define BPF_ABS 0x20
-#define BPF_IND 0x40
-#define BPF_MEM 0x60
-#define BPF_LEN 0x80
-#define BPF_MSH 0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code) ((code) & 0xf0)
-#define BPF_ADD 0x00
-#define BPF_SUB 0x10
-#define BPF_MUL 0x20
-#define BPF_DIV 0x30
-#define BPF_OR 0x40
-#define BPF_AND 0x50
-#define BPF_LSH 0x60
-#define BPF_RSH 0x70
-#define BPF_NEG 0x80
-#define BPF_MOD 0x90
-#define BPF_XOR 0xa0
-
-#define BPF_JA 0x00
-#define BPF_JEQ 0x10
-#define BPF_JGT 0x20
-#define BPF_JGE 0x30
-#define BPF_JSET 0x40
-#define BPF_SRC(code) ((code) & 0x08)
-#define BPF_K 0x00
-#define BPF_X 0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code) ((code) & 0x18)
-#define BPF_A 0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define BPF_TAX 0x00
-#define BPF_TXA 0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
- We use them to reference ancillary data.
- Unlike introduction new instructions, it does not break
- existing compilers/optimizers.
- */
-#define SKF_AD_OFF (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 4
-#define SKF_AD_IFINDEX 8
-#define SKF_AD_NLATTR 12
-#define SKF_AD_NLATTR_NEST 16
-#define SKF_AD_MARK 20
-#define SKF_AD_QUEUE 24
-#define SKF_AD_HATYPE 28
-#define SKF_AD_RXHASH 32
-#define SKF_AD_CPU 36
-#define SKF_AD_ALU_XOR_X 40
-#define SKF_AD_MAX 44
-#define SKF_NET_OFF (-0x100000)
-#define SKF_LL_OFF (-0x200000)
-
-#ifdef __KERNEL__
+#include <uapi/linux/filter.h>
#ifdef CONFIG_COMPAT
/*
@@ -254,6 +125,4 @@ enum {
BPF_S_ANC_SECCOMP_LD_W,
};
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
deleted file mode 100644
index d500369..0000000
--- a/include/linux/firewire-cdev.h
+++ /dev/null
@@ -1,1039 +0,0 @@
-/*
- * Char device interface.
- *
- * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CDEV_H
-#define _LINUX_FIREWIRE_CDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/firewire-constants.h>
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_EVENT_BUS_RESET 0x00
-#define FW_CDEV_EVENT_RESPONSE 0x01
-#define FW_CDEV_EVENT_REQUEST 0x02
-#define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04
-#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_EVENT_REQUEST2 0x06
-#define FW_CDEV_EVENT_PHY_PACKET_SENT 0x07
-#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08
-#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09
-
-/**
- * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
- * @closure: For arbitrary use by userspace
- * @type: Discriminates the fw_cdev_event_ types
- *
- * This struct may be used to access generic members of all fw_cdev_event_
- * types regardless of the specific type.
- *
- * Data passed in the @closure field for a request will be returned in the
- * corresponding event. It is big enough to hold a pointer on all platforms.
- * The ioctl used to set @closure depends on the @type of event.
- */
-struct fw_cdev_event_common {
- __u64 closure;
- __u32 type;
-};
-
-/**
- * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
- * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
- * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
- * @node_id: New node ID of this node
- * @local_node_id: Node ID of the local node, i.e. of the controller
- * @bm_node_id: Node ID of the bus manager
- * @irm_node_id: Node ID of the iso resource manager
- * @root_node_id: Node ID of the root node
- * @generation: New bus generation
- *
- * This event is sent when the bus the device belongs to goes through a bus
- * reset. It provides information about the new bus configuration, such as
- * new node ID for this device, new root ID, and others.
- *
- * If @bm_node_id is 0xffff right after bus reset it can be reread by an
- * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
- * Kernels with ABI version < 4 do not set @bm_node_id.
- */
-struct fw_cdev_event_bus_reset {
- __u64 closure;
- __u32 type;
- __u32 node_id;
- __u32 local_node_id;
- __u32 bm_node_id;
- __u32 irm_node_id;
- __u32 root_node_id;
- __u32 generation;
-};
-
-/**
- * struct fw_cdev_event_response - Sent when a response packet was received
- * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
- * or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
- * or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
- * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
- * @rcode: Response code returned by the remote node
- * @length: Data length, i.e. the response's payload size in bytes
- * @data: Payload data, if any
- *
- * This event is sent when the stack receives a response to an outgoing request
- * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses
- * carrying data (read and lock responses) follows immediately and can be
- * accessed through the @data field.
- *
- * The event is also generated after conclusions of transactions that do not
- * involve response packets. This includes unified write transactions,
- * broadcast write transactions, and transmission of asynchronous stream
- * packets. @rcode indicates success or failure of such transmissions.
- */
-struct fw_cdev_event_response {
- __u64 closure;
- __u32 type;
- __u32 rcode;
- __u32 length;
- __u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
- * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
- *
- * This event is sent instead of &fw_cdev_event_request2 if the kernel or
- * the client implements ABI version <= 3. &fw_cdev_event_request lacks
- * essential information; use &fw_cdev_event_request2 instead.
- */
-struct fw_cdev_event_request {
- __u64 closure;
- __u32 type;
- __u32 tcode;
- __u64 offset;
- __u32 handle;
- __u32 length;
- __u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request2 - Sent on incoming request to an address region
- * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
- * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
- * @tcode: Transaction code of the incoming request
- * @offset: The offset into the 48-bit per-node address space
- * @source_node_id: Sender node ID
- * @destination_node_id: Destination node ID
- * @card: The index of the card from which the request came
- * @generation: Bus generation in which the request is valid
- * @handle: Reference to the kernel-side pending request
- * @length: Data length, i.e. the request's payload size in bytes
- * @data: Incoming data, if any
- *
- * This event is sent when the stack receives an incoming request to an address
- * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is
- * guaranteed to be completely contained in the specified region. Userspace is
- * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
- * using the same @handle.
- *
- * The payload data for requests carrying data (write and lock requests)
- * follows immediately and can be accessed through the @data field.
- *
- * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
- * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
- * i.e. encodes the extended transaction code.
- *
- * @card may differ from &fw_cdev_get_info.card because requests are received
- * from all cards of the Linux host. @source_node_id, @destination_node_id, and
- * @generation pertain to that card. Destination node ID and bus generation may
- * therefore differ from the corresponding fields of the last
- * &fw_cdev_event_bus_reset.
- *
- * @destination_node_id may also differ from the current node ID because of a
- * non-local bus ID part or in case of a broadcast write request. Note, a
- * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
- * broadcast write request; the kernel will then release the kernel-side pending
- * request but will not actually send a response packet.
- *
- * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
- * sent a write response immediately after the request was received; in this
- * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
- * release the kernel-side pending request, though another response won't be
- * sent.
- *
- * If the client subsequently needs to initiate requests to the sender node of
- * an &fw_cdev_event_request2, it needs to use a device file with matching
- * card index, node ID, and generation for outbound requests.
- */
-struct fw_cdev_event_request2 {
- __u64 closure;
- __u32 type;
- __u32 tcode;
- __u64 offset;
- __u32 source_node_id;
- __u32 destination_node_id;
- __u32 card;
- __u32 generation;
- __u32 handle;
- __u32 length;
- __u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
- * @closure: See &fw_cdev_event_common;
- * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
- * @cycle: Cycle counter of the last completed packet
- * @header_length: Total length of following headers, in bytes
- * @header: Stripped headers, if any
- *
- * This event is sent when the controller has completed an &fw_cdev_iso_packet
- * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
- * without the interrupt bit set that the kernel's internal buffer for @header
- * is about to overflow. (In the last case, kernels with ABI version < 5 drop
- * header data up to the next interrupt packet.)
- *
- * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
- *
- * In version 3 and some implementations of version 2 of the ABI, &header_length
- * is a multiple of 4 and &header contains timestamps of all packets up until
- * the interrupt packet. The format of the timestamps is as described below for
- * isochronous reception. In version 1 of the ABI, &header_length was 0.
- *
- * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
- *
- * The headers stripped of all packets up until and including the interrupt
- * packet are returned in the @header field. The amount of header data per
- * packet is as specified at iso context creation by
- * &fw_cdev_create_iso_context.header_size.
- *
- * Hence, _interrupt.header_length / _context.header_size is the number of
- * packets received in this interrupt event. The client can now iterate
- * through the mmap()'ed DMA buffer according to this number of packets and
- * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
- *
- * Since version 2 of this ABI, the portion for each packet in _interrupt.header
- * consists of the 1394 isochronous packet header, followed by a timestamp
- * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
- * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
- *
- * Format of 1394 iso packet header: 16 bits data_length, 2 bits tag, 6 bits
- * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
- * data_length is the actual received size of the packet without the four
- * 1394 iso packet header bytes.
- *
- * Format of timestamp: 16 bits invalid, 3 bits cycleSeconds, 13 bits
- * cycleCount, in big endian byte order.
- *
- * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
- * data followed directly after the 1394 is header if header_size > 4.
- * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
- */
-struct fw_cdev_event_iso_interrupt {
- __u64 closure;
- __u32 type;
- __u32 cycle;
- __u32 header_length;
- __u32 header[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
- * @closure: See &fw_cdev_event_common;
- * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @completed: Offset into the receive buffer; data before this offset is valid
- *
- * This event is sent in multichannel contexts (context type
- * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
- * chunks that have been completely filled and that have the
- * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO.
- *
- * The buffer is continuously filled with the following data, per packet:
- * - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
- * but in little endian byte order,
- * - packet payload (as many bytes as specified in the data_length field of
- * the 1394 iso packet header) in big endian byte order,
- * - 0...3 padding bytes as needed to align the following trailer quadlet,
- * - trailer quadlet, containing the reception timestamp as described at
- * &fw_cdev_event_iso_interrupt, but in little endian byte order.
- *
- * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
- * When processing the data, stop before a packet that would cross the
- * @completed offset.
- *
- * A packet near the end of a buffer chunk will typically spill over into the
- * next queued buffer chunk. It is the responsibility of the client to check
- * for this condition, assemble a broken-up packet from its parts, and not to
- * re-queue any buffer chunks in which as yet unread packet parts reside.
- */
-struct fw_cdev_event_iso_interrupt_mc {
- __u64 closure;
- __u32 type;
- __u32 completed;
-};
-
-/**
- * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
- * @closure: See &fw_cdev_event_common;
- * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
- * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @handle: Reference by which an allocated resource can be deallocated
- * @channel: Isochronous channel which was (de)allocated, if any
- * @bandwidth: Bandwidth allocation units which were (de)allocated, if any
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
- * resource was allocated at the IRM. The client has to check @channel and
- * @bandwidth for whether the allocation actually succeeded.
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
- * resource was deallocated at the IRM. It is also sent when automatic
- * reallocation after a bus reset failed.
- *
- * @channel is <0 if no channel was (de)allocated or if reallocation failed.
- * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
- */
-struct fw_cdev_event_iso_resource {
- __u64 closure;
- __u32 type;
- __u32 handle;
- __s32 channel;
- __s32 bandwidth;
-};
-
-/**
- * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
- * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
- * or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
- * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
- * @rcode: %RCODE_..., indicates success or failure of transmission
- * @length: Data length in bytes
- * @data: Incoming data
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
- * except in case of a ping packet: Then, @length is 4, and @data[0] is the
- * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
- * consists of the two PHY packet quadlets, in host byte order.
- */
-struct fw_cdev_event_phy_packet {
- __u64 closure;
- __u32 type;
- __u32 rcode;
- __u32 length;
- __u32 data[0];
-};
-
-/**
- * union fw_cdev_event - Convenience union of fw_cdev_event_ types
- * @common: Valid for all types
- * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
- * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
- * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST
- * @request2: Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
- * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
- * @iso_interrupt_mc: Valid if @common.type ==
- * %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @iso_resource: Valid if @common.type ==
- * %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @phy_packet: Valid if @common.type ==
- * %FW_CDEV_EVENT_PHY_PACKET_SENT or
- * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED
- *
- * Convenience union for userspace use. Events could be read(2) into an
- * appropriately aligned char buffer and then cast to this union for further
- * processing. Note that for a request, response or iso_interrupt event,
- * the data[] or header[] may make the size of the full event larger than
- * sizeof(union fw_cdev_event). Also note that if you attempt to read(2)
- * an event into a buffer that is not large enough for it, the data that does
- * not fit will be discarded so that the next read(2) will return a new event.
- */
-union fw_cdev_event {
- struct fw_cdev_event_common common;
- struct fw_cdev_event_bus_reset bus_reset;
- struct fw_cdev_event_response response;
- struct fw_cdev_event_request request;
- struct fw_cdev_event_request2 request2; /* added in 2.6.36 */
- struct fw_cdev_event_iso_interrupt iso_interrupt;
- struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */
- struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */
- struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */
-};
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info)
-#define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate)
-#define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response)
-#define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
-#define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
-#define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
-#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
-#define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso)
-#define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso)
-#define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso)
-
-/* available since kernel version 2.6.24 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE _IOW('#', 0x0e, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */
-#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
-
-/* available since kernel version 2.6.34 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_IOC_SEND_PHY_PACKET _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
-#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
-#define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
-
-/* available since kernel version 3.4 */
-#define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso)
-
-/*
- * ABI version history
- * 1 (2.6.22) - initial version
- * (2.6.24) - added %FW_CDEV_IOC_GET_CYCLE_TIMER
- * 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if
- * &fw_cdev_create_iso_context.header_size is 8 or more
- * - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
- * %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
- * %FW_CDEV_IOC_SEND_STREAM_PACKET
- * (2.6.32) - added time stamp to xmit &fw_cdev_event_iso_interrupt
- * (2.6.33) - IR has always packet-per-buffer semantics now, not one of
- * dual-buffer or packet-per-buffer depending on hardware
- * - shared use and auto-response for FCP registers
- * 3 (2.6.34) - made &fw_cdev_get_cycle_timer reliable
- * - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
- * 4 (2.6.36) - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
- * and &fw_cdev_allocate.region_end
- * - implemented &fw_cdev_event_bus_reset.bm_node_id
- * - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
- * - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
- * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
- * %FW_CDEV_IOC_SET_ISO_CHANNELS
- * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
- * avoid dropping data
- * - added %FW_CDEV_IOC_FLUSH_ISO
- */
-
-/**
- * struct fw_cdev_get_info - General purpose information ioctl
- * @version: The version field is just a running serial number. Both an
- * input parameter (ABI version implemented by the client) and
- * output parameter (ABI version implemented by the kernel).
- * A client shall fill in the ABI @version for which the client
- * was implemented. This is necessary for forward compatibility.
- * @rom_length: If @rom is non-zero, up to @rom_length bytes of Configuration
- * ROM will be copied into that user space address. In either
- * case, @rom_length is updated with the actual length of the
- * Configuration ROM.
- * @rom: If non-zero, address of a buffer to be filled by a copy of the
- * device's Configuration ROM
- * @bus_reset: If non-zero, address of a buffer to be filled by a
- * &struct fw_cdev_event_bus_reset with the current state
- * of the bus. This does not cause a bus reset to happen.
- * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
- * @card: The index of the card this device belongs to
- *
- * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
- * performs right after it opened a /dev/fw* file.
- *
- * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
- * is started by this ioctl.
- */
-struct fw_cdev_get_info {
- __u32 version;
- __u32 rom_length;
- __u64 rom;
- __u64 bus_reset;
- __u64 bus_reset_closure;
- __u32 card;
-};
-
-/**
- * struct fw_cdev_send_request - Send an asynchronous request packet
- * @tcode: Transaction code of the request
- * @length: Length of outgoing payload, in bytes
- * @offset: 48-bit offset at destination node
- * @closure: Passed back to userspace in the response event
- * @data: Userspace pointer to payload
- * @generation: The bus generation where packet is valid
- *
- * Send a request to the device. This ioctl implements all outgoing requests.
- * Both quadlet and block request specify the payload as a pointer to the data
- * in the @data field. Once the transaction completes, the kernel writes an
- * &fw_cdev_event_response event back. The @closure field is passed back to
- * user space in the response event.
- */
-struct fw_cdev_send_request {
- __u32 tcode;
- __u32 length;
- __u64 offset;
- __u64 closure;
- __u64 data;
- __u32 generation;
-};
-
-/**
- * struct fw_cdev_send_response - Send an asynchronous response packet
- * @rcode: Response code as determined by the userspace handler
- * @length: Length of outgoing payload, in bytes
- * @data: Userspace pointer to payload
- * @handle: The handle from the &fw_cdev_event_request
- *
- * Send a response to an incoming request. By setting up an address range using
- * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An
- * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
- * send a reply using this ioctl. The event has a handle to the kernel-side
- * pending transaction, which should be used with this ioctl.
- */
-struct fw_cdev_send_response {
- __u32 rcode;
- __u32 length;
- __u64 data;
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_allocate - Allocate a CSR in an address range
- * @offset: Start offset of the address range
- * @closure: To be passed back to userspace in request events
- * @length: Length of the CSR, in bytes
- * @handle: Handle to the allocation, written by the kernel
- * @region_end: First address above the address range (added in ABI v4, 2.6.36)
- *
- * Allocate an address range in the 48-bit address space on the local node
- * (the controller). This allows userspace to listen for requests with an
- * offset within that address range. Every time when the kernel receives a
- * request within the range, an &fw_cdev_event_request2 event will be emitted.
- * (If the kernel or the client implements ABI version <= 3, an
- * &fw_cdev_event_request will be generated instead.)
- *
- * The @closure field is passed back to userspace in these request events.
- * The @handle field is an out parameter, returning a handle to the allocated
- * range to be used for later deallocation of the range.
- *
- * The address range is allocated on all local nodes. The address allocation
- * is exclusive except for the FCP command and response registers. If an
- * exclusive address region is already in use, the ioctl fails with errno set
- * to %EBUSY.
- *
- * If kernel and client implement ABI version >= 4, the kernel looks up a free
- * spot of size @length inside [@offset..@region_end) and, if found, writes
- * the start address of the new CSR back in @offset. I.e. @offset is an
- * in and out parameter. If this automatic placement of a CSR in a bigger
- * address range is not desired, the client simply needs to set @region_end
- * = @offset + @length.
- *
- * If the kernel or the client implements ABI version <= 3, @region_end is
- * ignored and effectively assumed to be @offset + @length.
- *
- * @region_end is only present in a kernel header >= 2.6.36. If necessary,
- * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
- */
-struct fw_cdev_allocate {
- __u64 offset;
- __u64 closure;
- __u32 length;
- __u32 handle;
- __u64 region_end; /* available since kernel version 2.6.36 */
-};
-
-/**
- * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
- * @handle: Handle to the address range or iso resource, as returned by the
- * kernel when the range or resource was allocated
- */
-struct fw_cdev_deallocate {
- __u32 handle;
-};
-
-#define FW_CDEV_LONG_RESET 0
-#define FW_CDEV_SHORT_RESET 1
-
-/**
- * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
- * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
- *
- * Initiate a bus reset for the bus this device is on. The bus reset can be
- * either the original (long) bus reset or the arbitrated (short) bus reset
- * introduced in 1394a-2000.
- *
- * The ioctl returns immediately. A subsequent &fw_cdev_event_bus_reset
- * indicates when the reset actually happened. Since ABI v4, this may be
- * considerably later than the ioctl because the kernel ensures a grace period
- * between subsequent bus resets as per IEEE 1394 bus management specification.
- */
-struct fw_cdev_initiate_bus_reset {
- __u32 type;
-};
-
-/**
- * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
- * @immediate: If non-zero, immediate key to insert before pointer
- * @key: Upper 8 bits of root directory pointer
- * @data: Userspace pointer to contents of descriptor block
- * @length: Length of descriptor block data, in quadlets
- * @handle: Handle to the descriptor, written by the kernel
- *
- * Add a descriptor block and optionally a preceding immediate key to the local
- * node's Configuration ROM.
- *
- * The @key field specifies the upper 8 bits of the descriptor root directory
- * pointer and the @data and @length fields specify the contents. The @key
- * should be of the form 0xXX000000. The offset part of the root directory entry
- * will be filled in by the kernel.
- *
- * If not 0, the @immediate field specifies an immediate key which will be
- * inserted before the root directory pointer.
- *
- * @immediate, @key, and @data array elements are CPU-endian quadlets.
- *
- * If successful, the kernel adds the descriptor and writes back a @handle to
- * the kernel-side object to be used for later removal of the descriptor block
- * and immediate key. The kernel will also generate a bus reset to signal the
- * change of the Configuration ROM to other nodes.
- *
- * This ioctl affects the Configuration ROMs of all local nodes.
- * The ioctl only succeeds on device files which represent a local node.
- */
-struct fw_cdev_add_descriptor {
- __u32 immediate;
- __u32 key;
- __u64 data;
- __u32 length;
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
- * @handle: Handle to the descriptor, as returned by the kernel when the
- * descriptor was added
- *
- * Remove a descriptor block and accompanying immediate key from the local
- * nodes' Configuration ROMs. The kernel will also generate a bus reset to
- * signal the change of the Configuration ROM to other nodes.
- */
-struct fw_cdev_remove_descriptor {
- __u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
-#define FW_CDEV_ISO_CONTEXT_RECEIVE 1
-#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL 2 /* added in 2.6.36 */
-
-/**
- * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
- * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
- * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
- * @header_size: Header size to strip in single-channel reception
- * @channel: Channel to bind to in single-channel reception or transmission
- * @speed: Transmission speed
- * @closure: To be returned in &fw_cdev_event_iso_interrupt or
- * &fw_cdev_event_iso_interrupt_multichannel
- * @handle: Handle to context, written back by kernel
- *
- * Prior to sending or receiving isochronous I/O, a context must be created.
- * The context records information about the transmit or receive configuration
- * and typically maps to an underlying hardware resource. A context is set up
- * for either sending or receiving. It is bound to a specific isochronous
- * @channel.
- *
- * In case of multichannel reception, @header_size and @channel are ignored
- * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
- * and must be a multiple of 4. It is ignored in other context types.
- *
- * @speed is ignored in receive context types.
- *
- * If a context was successfully created, the kernel writes back a handle to the
- * context, which must be passed in for subsequent operations on that context.
- *
- * Limitations:
- * No more than one iso context can be created per fd.
- * The total number of contexts that all userspace and kernelspace drivers can
- * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
- * direction, and of them at most one multichannel receive context.
- */
-struct fw_cdev_create_iso_context {
- __u32 type;
- __u32 header_size;
- __u32 channel;
- __u32 speed;
- __u64 closure;
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
- * @channels: Bitmask of channels to listen to
- * @handle: Handle of the mutichannel receive context
- *
- * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
- *
- * The ioctl fails with errno %EBUSY if there is already another receive context
- * on a channel in @channels. In that case, the bitmask of all unoccupied
- * channels is returned in @channels.
- */
-struct fw_cdev_set_iso_channels {
- __u64 channels;
- __u32 handle;
-};
-
-#define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v)
-#define FW_CDEV_ISO_INTERRUPT (1 << 16)
-#define FW_CDEV_ISO_SKIP (1 << 17)
-#define FW_CDEV_ISO_SYNC (1 << 17)
-#define FW_CDEV_ISO_TAG(v) ((v) << 18)
-#define FW_CDEV_ISO_SY(v) ((v) << 20)
-#define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24)
-
-/**
- * struct fw_cdev_iso_packet - Isochronous packet
- * @control: Contains the header length (8 uppermost bits),
- * the sy field (4 bits), the tag field (2 bits), a sync flag
- * or a skip flag (1 bit), an interrupt flag (1 bit), and the
- * payload length (16 lowermost bits)
- * @header: Header and payload in case of a transmit context.
- *
- * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
- * Use the FW_CDEV_ISO_ macros to fill in @control.
- * The @header array is empty in case of receive contexts.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
- *
- * @control.HEADER_LENGTH must be a multiple of 4. It specifies the numbers of
- * bytes in @header that will be prepended to the packet's payload. These bytes
- * are copied into the kernel and will not be accessed after the ioctl has
- * returned.
- *
- * The @control.SY and TAG fields are copied to the iso packet header. These
- * fields are specified by IEEE 1394a and IEC 61883-1.
- *
- * The @control.SKIP flag specifies that no packet is to be sent in a frame.
- * When using this, all other fields except @control.INTERRUPT must be zero.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
- *
- * @control.HEADER_LENGTH must be a multiple of the context's header_size.
- * If the HEADER_LENGTH is larger than the context's header_size, multiple
- * packets are queued for this entry.
- *
- * The @control.SY and TAG fields are ignored.
- *
- * If the @control.SYNC flag is set, the context drops all packets until a
- * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
- *
- * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
- * one packet (in addition to payload quadlets that have been defined as headers
- * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
- * If more bytes are received, the additional bytes are dropped. If less bytes
- * are received, the remaining bytes in this part of the payload buffer will not
- * be written to, not even by the next packet. I.e., packets received in
- * consecutive frames will not necessarily be consecutive in memory. If an
- * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
- * among them.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued
- * multiple receive packets is completed when its last packet is completed.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
- *
- * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
- * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
- * of packets to be placed into the buffer chunk is not known beforehand.
- *
- * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
- * for header, payload, padding, and trailer bytes of one or more packets.
- * It must be a multiple of 4.
- *
- * @control.HEADER_LENGTH, TAG and SY are ignored. SYNC is treated as described
- * for single-channel reception.
- *
- * When a buffer chunk with the @control.INTERRUPT flag set has been filled
- * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
- */
-struct fw_cdev_iso_packet {
- __u32 control;
- __u32 header[0];
-};
-
-/**
- * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
- * @packets: Userspace pointer to an array of &fw_cdev_iso_packet
- * @data: Pointer into mmap()'ed payload buffer
- * @size: Size of the @packets array, in bytes
- * @handle: Isochronous context handle
- *
- * Queue a number of isochronous packets for reception or transmission.
- * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
- * which describe how to transmit from or receive into a contiguous region
- * of a mmap()'ed payload buffer. As part of transmit packet descriptors,
- * a series of headers can be supplied, which will be prepended to the
- * payload during DMA.
- *
- * The kernel may or may not queue all packets, but will write back updated
- * values of the @packets, @data and @size fields, so the ioctl can be
- * resubmitted easily.
- *
- * In case of a multichannel receive context, @data must be quadlet-aligned
- * relative to the buffer start.
- */
-struct fw_cdev_queue_iso {
- __u64 packets;
- __u64 data;
- __u32 size;
- __u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
-#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
-
-/**
- * struct fw_cdev_start_iso - Start an isochronous transmission or reception
- * @cycle: Cycle in which to start I/O. If @cycle is greater than or
- * equal to 0, the I/O will start on that cycle.
- * @sync: Determines the value to wait for for receive packets that have
- * the %FW_CDEV_ISO_SYNC bit set
- * @tags: Tag filter bit mask. Only valid for isochronous reception.
- * Determines the tag values for which packets will be accepted.
- * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
- * @handle: Isochronous context handle within which to transmit or receive
- */
-struct fw_cdev_start_iso {
- __s32 cycle;
- __u32 sync;
- __u32 tags;
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
- * @handle: Handle of isochronous context to stop
- */
-struct fw_cdev_stop_iso {
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_flush_iso - flush completed iso packets
- * @handle: handle of isochronous context to flush
- *
- * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
- * report any completed packets.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
- * offset in the receive buffer, if it has changed; this is typically in the
- * middle of some buffer chunk.
- *
- * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * events generated by this ioctl are sent synchronously, i.e., are available
- * for reading from the file descriptor when this ioctl returns.
- */
-struct fw_cdev_flush_iso {
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer - read cycle timer register
- * @local_time: system time, in microseconds since the Epoch
- * @cycle_timer: Cycle Time register contents
- *
- * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
- * and only with microseconds resolution.
- *
- * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
- * monotonic) @cycle_timer values on certain controllers.
- */
-struct fw_cdev_get_cycle_timer {
- __u64 local_time;
- __u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer2 - read cycle timer register
- * @tv_sec: system time, seconds
- * @tv_nsec: system time, sub-seconds part in nanoseconds
- * @clk_id: input parameter, clock from which to get the system time
- * @cycle_timer: Cycle Time register contents
- *
- * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
- * and also the system clock. This allows to correlate reception time of
- * isochronous packets with system time.
- *
- * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
- * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
- * and Linux' %CLOCK_MONOTONIC_RAW.
- *
- * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
- * 12 bits cycleOffset, in host byte order. Cf. the Cycle Time register
- * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
- */
-struct fw_cdev_get_cycle_timer2 {
- __s64 tv_sec;
- __s32 tv_nsec;
- __s32 clk_id;
- __u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
- * @closure: Passed back to userspace in corresponding iso resource events
- * @channels: Isochronous channels of which one is to be (de)allocated
- * @bandwidth: Isochronous bandwidth units to be (de)allocated
- * @handle: Handle to the allocation, written by the kernel (only valid in
- * case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
- * isochronous channel and/or of isochronous bandwidth at the isochronous
- * resource manager (IRM). Only one of the channels specified in @channels is
- * allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
- * communication with the IRM, indicating success or failure in the event data.
- * The kernel will automatically reallocate the resources after bus resets.
- * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
- * will be sent. The kernel will also automatically deallocate the resources
- * when the file descriptor is closed.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
- * deallocation of resources which were allocated as described above.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
- * without automatic re- or deallocation.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
- * indicating success or failure in its data.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
- * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
- * instead of allocated.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
- * for the lifetime of the fd or @handle.
- * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
- * for the duration of a bus generation.
- *
- * @channels is a host-endian bitfield with the least significant bit
- * representing channel 0 and the most significant bit representing channel 63:
- * 1ULL << c for each channel c that is a candidate for (de)allocation.
- *
- * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
- * one quadlet of data (payload or header data) at speed S1600.
- */
-struct fw_cdev_allocate_iso_resource {
- __u64 closure;
- __u64 channels;
- __u32 bandwidth;
- __u32 handle;
-};
-
-/**
- * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
- * @length: Length of outgoing payload, in bytes
- * @tag: Data format tag
- * @channel: Isochronous channel to transmit to
- * @sy: Synchronization code
- * @closure: Passed back to userspace in the response event
- * @data: Userspace pointer to payload
- * @generation: The bus generation where packet is valid
- * @speed: Speed to transmit at
- *
- * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
- * to every device which is listening to the specified channel. The kernel
- * writes an &fw_cdev_event_response event which indicates success or failure of
- * the transmission.
- */
-struct fw_cdev_send_stream_packet {
- __u32 length;
- __u32 tag;
- __u32 channel;
- __u32 sy;
- __u64 closure;
- __u64 data;
- __u32 generation;
- __u32 speed;
-};
-
-/**
- * struct fw_cdev_send_phy_packet - send a PHY packet
- * @closure: Passed back to userspace in the PHY-packet-sent event
- * @data: First and second quadlet of the PHY packet
- * @generation: The bus generation where packet is valid
- *
- * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
- * on the same card as this device. After transmission, an
- * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
- *
- * The payload @data[] shall be specified in host byte order. Usually,
- * @data[1] needs to be the bitwise inverse of @data[0]. VersaPHY packets
- * are an exception to this rule.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_send_phy_packet {
- __u64 closure;
- __u32 data[2];
- __u32 generation;
-};
-
-/**
- * struct fw_cdev_receive_phy_packets - start reception of PHY packets
- * @closure: Passed back to userspace in phy packet events
- *
- * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
- * incoming PHY packets from any node on the same bus as the device.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_receive_phy_packets {
- __u64 closure;
-};
-
-#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
-
-#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h
deleted file mode 100644
index 9b4bb5f..0000000
--- a/include/linux/firewire-constants.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * IEEE 1394 constants.
- *
- * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CONSTANTS_H
-#define _LINUX_FIREWIRE_CONSTANTS_H
-
-#define TCODE_WRITE_QUADLET_REQUEST 0x0
-#define TCODE_WRITE_BLOCK_REQUEST 0x1
-#define TCODE_WRITE_RESPONSE 0x2
-#define TCODE_READ_QUADLET_REQUEST 0x4
-#define TCODE_READ_BLOCK_REQUEST 0x5
-#define TCODE_READ_QUADLET_RESPONSE 0x6
-#define TCODE_READ_BLOCK_RESPONSE 0x7
-#define TCODE_CYCLE_START 0x8
-#define TCODE_LOCK_REQUEST 0x9
-#define TCODE_STREAM_DATA 0xa
-#define TCODE_LOCK_RESPONSE 0xb
-
-#define EXTCODE_MASK_SWAP 0x1
-#define EXTCODE_COMPARE_SWAP 0x2
-#define EXTCODE_FETCH_ADD 0x3
-#define EXTCODE_LITTLE_ADD 0x4
-#define EXTCODE_BOUNDED_ADD 0x5
-#define EXTCODE_WRAP_ADD 0x6
-#define EXTCODE_VENDOR_DEPENDENT 0x7
-
-/* Linux firewire-core (Juju) specific tcodes */
-#define TCODE_LOCK_MASK_SWAP (0x10 | EXTCODE_MASK_SWAP)
-#define TCODE_LOCK_COMPARE_SWAP (0x10 | EXTCODE_COMPARE_SWAP)
-#define TCODE_LOCK_FETCH_ADD (0x10 | EXTCODE_FETCH_ADD)
-#define TCODE_LOCK_LITTLE_ADD (0x10 | EXTCODE_LITTLE_ADD)
-#define TCODE_LOCK_BOUNDED_ADD (0x10 | EXTCODE_BOUNDED_ADD)
-#define TCODE_LOCK_WRAP_ADD (0x10 | EXTCODE_WRAP_ADD)
-#define TCODE_LOCK_VENDOR_DEPENDENT (0x10 | EXTCODE_VENDOR_DEPENDENT)
-
-#define RCODE_COMPLETE 0x0
-#define RCODE_CONFLICT_ERROR 0x4
-#define RCODE_DATA_ERROR 0x5
-#define RCODE_TYPE_ERROR 0x6
-#define RCODE_ADDRESS_ERROR 0x7
-
-/* Linux firewire-core (Juju) specific rcodes */
-#define RCODE_SEND_ERROR 0x10
-#define RCODE_CANCELLED 0x11
-#define RCODE_BUSY 0x12
-#define RCODE_GENERATION 0x13
-#define RCODE_NO_ACK 0x14
-
-#define SCODE_100 0x0
-#define SCODE_200 0x1
-#define SCODE_400 0x2
-#define SCODE_800 0x3
-#define SCODE_1600 0x4
-#define SCODE_3200 0x5
-#define SCODE_BETA 0x3
-
-#define ACK_COMPLETE 0x1
-#define ACK_PENDING 0x2
-#define ACK_BUSY_X 0x4
-#define ACK_BUSY_A 0x5
-#define ACK_BUSY_B 0x6
-#define ACK_DATA_ERROR 0xd
-#define ACK_TYPE_ERROR 0xe
-
-#define RETRY_1 0x00
-#define RETRY_X 0x01
-#define RETRY_A 0x02
-#define RETRY_B 0x03
-
-#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/include/linux/flat.h b/include/linux/flat.h
index ec56852..2c1eb15 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -6,58 +6,12 @@
* This file provides the definitions and structures needed to
* support uClinux flat-format executables.
*/
-
#ifndef _LINUX_FLAT_H
#define _LINUX_FLAT_H
-#ifdef __KERNEL__
#include <asm/flat.h>
-#endif
-
-#define FLAT_VERSION 0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define MAX_SHARED_LIBS (4)
-#else
-#define MAX_SHARED_LIBS (1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development, all fields are in network byte order.
- */
+#include <uapi/linux/flat.h>
-struct flat_hdr {
- char magic[4];
- unsigned long rev; /* version (as above) */
- unsigned long entry; /* Offset of first executable instruction
- with text segment from beginning of file */
- unsigned long data_start; /* Offset of data segment from beginning of
- file */
- unsigned long data_end; /* Offset of end of data segment
- from beginning of file */
- unsigned long bss_end; /* Offset of end of bss segment from beginning
- of file */
-
- /* (It is assumed that data_end through bss_end forms the bss segment.) */
-
- unsigned long stack_size; /* Size of stack, in bytes */
- unsigned long reloc_start; /* Offset of relocation records from
- beginning of file */
- unsigned long reloc_count; /* Number of relocation records */
- unsigned long flags;
- unsigned long build_date; /* When the program/library was built */
- unsigned long filler[5]; /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
/*
* While it would be nice to keep this header clean, users of older
* tools still need this support in the kernel. So this section is
@@ -95,6 +49,4 @@ typedef union {
} reloc;
} flat_v2_reloc_t;
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_FLAT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8cb86cf..001c7cf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1,337 +1,6 @@
#ifndef _LINUX_FS_H
#define _LINUX_FS_H
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
-
-#include <linux/limits.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be
- * recompiled to take full advantage of the new limits..
- */
-
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
-
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
-
-#define SEEK_SET 0 /* seek relative to beginning of file */
-#define SEEK_CUR 1 /* seek relative to current file position */
-#define SEEK_END 2 /* seek relative to end of file */
-#define SEEK_DATA 3 /* seek to the next data */
-#define SEEK_HOLE 4 /* seek to the next hole */
-#define SEEK_MAX SEEK_HOLE
-
-struct fstrim_range {
- __u64 start;
- __u64 len;
- __u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
- unsigned long nr_files; /* read only */
- unsigned long nr_free_files; /* read only */
- unsigned long max_files; /* tunable */
-};
-
-struct inodes_stat_t {
- int nr_inodes;
- int nr_unused;
- int dummy[5]; /* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE 8192 /* this can well be larger on a larger system */
-
-#define MAY_EXEC 0x00000001
-#define MAY_WRITE 0x00000002
-#define MAY_READ 0x00000004
-#define MAY_APPEND 0x00000008
-#define MAY_ACCESS 0x00000010
-#define MAY_OPEN 0x00000020
-#define MAY_CHDIR 0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK 0x00000080
-
-/*
- * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ ((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE ((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK ((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD ((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE ((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC ((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY ((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL ((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
- (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME ((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM ((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH ((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN 1
-#define SEL_OUT 2
-#define SEL_EX 4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move()
- * during rename() internally.
- */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY 1 /* Mount read-only */
-#define MS_NOSUID 2 /* Ignore suid and sgid bits */
-#define MS_NODEV 4 /* Disallow access to device special files */
-#define MS_NOEXEC 8 /* Disallow program execution */
-#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
-#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
-#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
-#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
-#define MS_NOATIME 1024 /* Do not update access times. */
-#define MS_NODIRATIME 2048 /* Do not update directory access times */
-#define MS_BIND 4096
-#define MS_MOVE 8192
-#define MS_REC 16384
-#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
- MS_VERBOSE is deprecated. */
-#define MS_SILENT 32768
-#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
-#define MS_UNBINDABLE (1<<17) /* change to unbindable */
-#define MS_PRIVATE (1<<18) /* change to private */
-#define MS_SLAVE (1<<19) /* change to slave */
-#define MS_SHARED (1<<20) /* change to shared */
-#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION (1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
-#define MS_NOSEC (1<<28)
-#define MS_BORN (1<<29)
-#define MS_ACTIVE (1<<30)
-#define MS_NOUSER (1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC 1 /* Writes are synced at once */
-#define S_NOATIME 2 /* Do not update access times */
-#define S_APPEND 4 /* Append-only file */
-#define S_IMMUTABLE 8 /* Immutable file */
-#define S_DEAD 16 /* removed, but still open directory */
-#define S_NOQUOTA 32 /* Inode is not counted to quota */
-#define S_DIRSYNC 64 /* Directory modifications are synchronous */
-#define S_NOCMTIME 128 /* Do not update file c/mtime */
-#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE 512 /* Inode is fs-internal */
-#define S_IMA 1024 /* Inode has an associated IMA struct */
-#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
-#define S_NOSEC 4096 /* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use. This means that all of the inodes will not have their
- * i_flags updated. Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
- ((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
- ((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
- probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
-#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
-#define BLKRRPART _IO(0x12,95) /* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
-#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
-#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
-#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
-#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons. Do not use sizeof! */
-
-#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
- probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET _IOR(0x12,112,size_t)
-#define BLKBSZSET _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-#define BLKZEROOUT _IO(0x12,127)
-
-#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
-#define FIBMAP _IO(0x00,1) /* bmap access */
-#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
-#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
-#define FITHAW _IOWR('X', 120, int) /* Thaw */
-#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
-
-#define FS_IOC_GETFLAGS _IOR('f', 1, long)
-#define FS_IOC_SETFLAGS _IOW('f', 2, long)
-#define FS_IOC_GETVERSION _IOR('v', 1, long)
-#define FS_IOC_SETVERSION _IOW('v', 2, long)
-#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
-#define FS_IOC32_GETVERSION _IOR('v', 1, int)
-#define FS_IOC32_SETVERSION _IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define FS_SECRM_FL 0x00000001 /* Secure deletion */
-#define FS_UNRM_FL 0x00000002 /* Undelete */
-#define FS_COMPR_FL 0x00000004 /* Compress file */
-#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
-#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL 0x00000040 /* do not dump file */
-#define FS_NOATIME_FL 0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL 0x00000100
-#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL 0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL 0x00001000 /* btree format dir */
-#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL 0x00080000 /* Extents */
-#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
-
-#ifdef __KERNEL__
#include <linux/linkage.h>
#include <linux/wait.h>
@@ -360,6 +29,7 @@ struct inodes_stat_t {
#include <linux/blk_types.h>
#include <asm/byteorder.h>
+#include <uapi/linux/fs.h>
struct export_operations;
struct hd_geometry;
@@ -2876,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode)
inode->i_flags |= S_NOSEC;
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
index 1cebaee..2a707d7 100644
--- a/include/linux/fsl_hypervisor.h
+++ b/include/linux/fsl_hypervisor.h
@@ -36,187 +36,11 @@
* also be included by applications that need to communicate with the driver
* via the ioctl interface.
*/
-
#ifndef FSL_HYPERVISOR_H
#define FSL_HYPERVISOR_H
-#include <linux/types.h>
-
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- * calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
- __u32 ret;
- __u32 partition;
-};
+#include <uapi/linux/fsl_hypervisor.h>
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- * calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- * 0 = Stopped
- * 1 = Running
- * 2 = Starting
- * 3 = Stopping
- */
-struct fsl_hv_ioctl_status {
- __u32 ret;
- __u32 partition;
- __u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
- __u32 ret;
- __u32 partition;
- __u32 entry_point;
- __u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- * partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
- __u32 ret;
- __u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- * partition
- * @target: the partition ID of the target partition, or -1 for this
- * partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- * partition
- * @remote_addr: guest physical address of a buffer in the
- * remote partition
- * @count: the number of bytes to copy. Both the local and remote
- * buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl. The
- * 'remote' partition is a different partition. The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1. In other words, either
- *
- * source == local and target == remote
- * or
- * source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
- __u32 ret;
- __u32 source;
- __u32 target;
- __u32 reserved; /* padding to ensure local_vaddr is aligned */
- __u64 local_vaddr;
- __u64 remote_paddr;
- __u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
- __u32 ret;
- __u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
- __u32 ret;
- __u32 handle;
- __u64 path;
- __u64 propname;
- __u64 propval;
- __u32 proplen;
- __u32 reserved; /* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE 0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
- _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
- _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
- _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
- _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
- _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
- _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
- _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
- _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
/**
* fsl_hv_event_register() - register a callback for failover events
@@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb);
int fsl_hv_failover_unregister(struct notifier_block *nb);
#endif
-
-#endif
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
deleted file mode 100644
index d8c713e..0000000
--- a/include/linux/fuse.h
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- FUSE: Filesystem in Userspace
- Copyright (C) 2001-2008 Miklos Szeredi <miklos@szeredi.hu>
-
- This program can be distributed under the terms of the GNU GPL.
- See the file COPYING.
-*/
-
-/*
- * This file defines the kernel interface of FUSE
- *
- * Protocol changelog:
- *
- * 7.9:
- * - new fuse_getattr_in input argument of GETATTR
- * - add lk_flags in fuse_lk_in
- * - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
- * - add blksize field to fuse_attr
- * - add file flags field to fuse_read_in and fuse_write_in
- *
- * 7.10
- * - add nonseekable open flag
- *
- * 7.11
- * - add IOCTL message
- * - add unsolicited notification support
- * - add POLL message and NOTIFY_POLL notification
- *
- * 7.12
- * - add umask flag to input argument of open, mknod and mkdir
- * - add notification messages for invalidation of inodes and
- * directory entries
- *
- * 7.13
- * - make max number of background requests and congestion threshold
- * tunables
- *
- * 7.14
- * - add splice support to fuse device
- *
- * 7.15
- * - add store notify
- * - add retrieve notify
- *
- * 7.16
- * - add BATCH_FORGET request
- * - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
- * fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
- * - add FUSE_IOCTL_32BIT flag
- *
- * 7.17
- * - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
- *
- * 7.18
- * - add FUSE_IOCTL_DIR flag
- * - add FUSE_NOTIFY_DELETE
- *
- * 7.19
- * - add FUSE_FALLOCATE
- *
- * 7.20
- * - add FUSE_AUTO_INVAL_DATA
- */
-
-#ifndef _LINUX_FUSE_H
-#define _LINUX_FUSE_H
-
-#include <linux/types.h>
-
-/*
- * Version negotiation:
- *
- * Both the kernel and userspace send the version they support in the
- * INIT request and reply respectively.
- *
- * If the major versions match then both shall use the smallest
- * of the two minor versions for communication.
- *
- * If the kernel supports a larger major version, then userspace shall
- * reply with the major version it supports, ignore the rest of the
- * INIT message and expect a new INIT message from the kernel with a
- * matching major version.
- *
- * If the library supports a larger major version, then it shall fall
- * back to the major protocol version sent by the kernel for
- * communication and reply with that major version (and an arbitrary
- * supported minor version).
- */
-
-/** Version number of this interface */
-#define FUSE_KERNEL_VERSION 7
-
-/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 20
-
-/** The node ID of the root inode */
-#define FUSE_ROOT_ID 1
-
-/* Make sure all structures are padded to 64bit boundary, so 32bit
- userspace works under 64bit kernels */
-
-struct fuse_attr {
- __u64 ino;
- __u64 size;
- __u64 blocks;
- __u64 atime;
- __u64 mtime;
- __u64 ctime;
- __u32 atimensec;
- __u32 mtimensec;
- __u32 ctimensec;
- __u32 mode;
- __u32 nlink;
- __u32 uid;
- __u32 gid;
- __u32 rdev;
- __u32 blksize;
- __u32 padding;
-};
-
-struct fuse_kstatfs {
- __u64 blocks;
- __u64 bfree;
- __u64 bavail;
- __u64 files;
- __u64 ffree;
- __u32 bsize;
- __u32 namelen;
- __u32 frsize;
- __u32 padding;
- __u32 spare[6];
-};
-
-struct fuse_file_lock {
- __u64 start;
- __u64 end;
- __u32 type;
- __u32 pid; /* tgid */
-};
-
-/**
- * Bitmasks for fuse_setattr_in.valid
- */
-#define FATTR_MODE (1 << 0)
-#define FATTR_UID (1 << 1)
-#define FATTR_GID (1 << 2)
-#define FATTR_SIZE (1 << 3)
-#define FATTR_ATIME (1 << 4)
-#define FATTR_MTIME (1 << 5)
-#define FATTR_FH (1 << 6)
-#define FATTR_ATIME_NOW (1 << 7)
-#define FATTR_MTIME_NOW (1 << 8)
-#define FATTR_LOCKOWNER (1 << 9)
-
-/**
- * Flags returned by the OPEN request
- *
- * FOPEN_DIRECT_IO: bypass page cache for this open file
- * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
- * FOPEN_NONSEEKABLE: the file is not seekable
- */
-#define FOPEN_DIRECT_IO (1 << 0)
-#define FOPEN_KEEP_CACHE (1 << 1)
-#define FOPEN_NONSEEKABLE (1 << 2)
-
-/**
- * INIT request/reply flags
- *
- * FUSE_ASYNC_READ: asynchronous read requests
- * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
- * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported)
- * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem
- * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
- * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB
- * FUSE_DONT_MASK: don't apply umask to file mode on create operations
- * FUSE_SPLICE_WRITE: kernel supports splice write on the device
- * FUSE_SPLICE_MOVE: kernel supports splice move on the device
- * FUSE_SPLICE_READ: kernel supports splice read on the device
- * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
- * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories
- * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages
- */
-#define FUSE_ASYNC_READ (1 << 0)
-#define FUSE_POSIX_LOCKS (1 << 1)
-#define FUSE_FILE_OPS (1 << 2)
-#define FUSE_ATOMIC_O_TRUNC (1 << 3)
-#define FUSE_EXPORT_SUPPORT (1 << 4)
-#define FUSE_BIG_WRITES (1 << 5)
-#define FUSE_DONT_MASK (1 << 6)
-#define FUSE_SPLICE_WRITE (1 << 7)
-#define FUSE_SPLICE_MOVE (1 << 8)
-#define FUSE_SPLICE_READ (1 << 9)
-#define FUSE_FLOCK_LOCKS (1 << 10)
-#define FUSE_HAS_IOCTL_DIR (1 << 11)
-#define FUSE_AUTO_INVAL_DATA (1 << 12)
-
-/**
- * CUSE INIT request/reply flags
- *
- * CUSE_UNRESTRICTED_IOCTL: use unrestricted ioctl
- */
-#define CUSE_UNRESTRICTED_IOCTL (1 << 0)
-
-/**
- * Release flags
- */
-#define FUSE_RELEASE_FLUSH (1 << 0)
-#define FUSE_RELEASE_FLOCK_UNLOCK (1 << 1)
-
-/**
- * Getattr flags
- */
-#define FUSE_GETATTR_FH (1 << 0)
-
-/**
- * Lock flags
- */
-#define FUSE_LK_FLOCK (1 << 0)
-
-/**
- * WRITE flags
- *
- * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
- * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
- */
-#define FUSE_WRITE_CACHE (1 << 0)
-#define FUSE_WRITE_LOCKOWNER (1 << 1)
-
-/**
- * Read flags
- */
-#define FUSE_READ_LOCKOWNER (1 << 1)
-
-/**
- * Ioctl flags
- *
- * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
- * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
- * FUSE_IOCTL_RETRY: retry with new iovecs
- * FUSE_IOCTL_32BIT: 32bit ioctl
- * FUSE_IOCTL_DIR: is a directory
- *
- * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
- */
-#define FUSE_IOCTL_COMPAT (1 << 0)
-#define FUSE_IOCTL_UNRESTRICTED (1 << 1)
-#define FUSE_IOCTL_RETRY (1 << 2)
-#define FUSE_IOCTL_32BIT (1 << 3)
-#define FUSE_IOCTL_DIR (1 << 4)
-
-#define FUSE_IOCTL_MAX_IOV 256
-
-/**
- * Poll flags
- *
- * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
- */
-#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
-
-enum fuse_opcode {
- FUSE_LOOKUP = 1,
- FUSE_FORGET = 2, /* no reply */
- FUSE_GETATTR = 3,
- FUSE_SETATTR = 4,
- FUSE_READLINK = 5,
- FUSE_SYMLINK = 6,
- FUSE_MKNOD = 8,
- FUSE_MKDIR = 9,
- FUSE_UNLINK = 10,
- FUSE_RMDIR = 11,
- FUSE_RENAME = 12,
- FUSE_LINK = 13,
- FUSE_OPEN = 14,
- FUSE_READ = 15,
- FUSE_WRITE = 16,
- FUSE_STATFS = 17,
- FUSE_RELEASE = 18,
- FUSE_FSYNC = 20,
- FUSE_SETXATTR = 21,
- FUSE_GETXATTR = 22,
- FUSE_LISTXATTR = 23,
- FUSE_REMOVEXATTR = 24,
- FUSE_FLUSH = 25,
- FUSE_INIT = 26,
- FUSE_OPENDIR = 27,
- FUSE_READDIR = 28,
- FUSE_RELEASEDIR = 29,
- FUSE_FSYNCDIR = 30,
- FUSE_GETLK = 31,
- FUSE_SETLK = 32,
- FUSE_SETLKW = 33,
- FUSE_ACCESS = 34,
- FUSE_CREATE = 35,
- FUSE_INTERRUPT = 36,
- FUSE_BMAP = 37,
- FUSE_DESTROY = 38,
- FUSE_IOCTL = 39,
- FUSE_POLL = 40,
- FUSE_NOTIFY_REPLY = 41,
- FUSE_BATCH_FORGET = 42,
- FUSE_FALLOCATE = 43,
-
- /* CUSE specific operations */
- CUSE_INIT = 4096,
-};
-
-enum fuse_notify_code {
- FUSE_NOTIFY_POLL = 1,
- FUSE_NOTIFY_INVAL_INODE = 2,
- FUSE_NOTIFY_INVAL_ENTRY = 3,
- FUSE_NOTIFY_STORE = 4,
- FUSE_NOTIFY_RETRIEVE = 5,
- FUSE_NOTIFY_DELETE = 6,
- FUSE_NOTIFY_CODE_MAX,
-};
-
-/* The read buffer is required to be at least 8k, but may be much larger */
-#define FUSE_MIN_READ_BUFFER 8192
-
-#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
-
-struct fuse_entry_out {
- __u64 nodeid; /* Inode ID */
- __u64 generation; /* Inode generation: nodeid:gen must
- be unique for the fs's lifetime */
- __u64 entry_valid; /* Cache timeout for the name */
- __u64 attr_valid; /* Cache timeout for the attributes */
- __u32 entry_valid_nsec;
- __u32 attr_valid_nsec;
- struct fuse_attr attr;
-};
-
-struct fuse_forget_in {
- __u64 nlookup;
-};
-
-struct fuse_forget_one {
- __u64 nodeid;
- __u64 nlookup;
-};
-
-struct fuse_batch_forget_in {
- __u32 count;
- __u32 dummy;
-};
-
-struct fuse_getattr_in {
- __u32 getattr_flags;
- __u32 dummy;
- __u64 fh;
-};
-
-#define FUSE_COMPAT_ATTR_OUT_SIZE 96
-
-struct fuse_attr_out {
- __u64 attr_valid; /* Cache timeout for the attributes */
- __u32 attr_valid_nsec;
- __u32 dummy;
- struct fuse_attr attr;
-};
-
-#define FUSE_COMPAT_MKNOD_IN_SIZE 8
-
-struct fuse_mknod_in {
- __u32 mode;
- __u32 rdev;
- __u32 umask;
- __u32 padding;
-};
-
-struct fuse_mkdir_in {
- __u32 mode;
- __u32 umask;
-};
-
-struct fuse_rename_in {
- __u64 newdir;
-};
-
-struct fuse_link_in {
- __u64 oldnodeid;
-};
-
-struct fuse_setattr_in {
- __u32 valid;
- __u32 padding;
- __u64 fh;
- __u64 size;
- __u64 lock_owner;
- __u64 atime;
- __u64 mtime;
- __u64 unused2;
- __u32 atimensec;
- __u32 mtimensec;
- __u32 unused3;
- __u32 mode;
- __u32 unused4;
- __u32 uid;
- __u32 gid;
- __u32 unused5;
-};
-
-struct fuse_open_in {
- __u32 flags;
- __u32 unused;
-};
-
-struct fuse_create_in {
- __u32 flags;
- __u32 mode;
- __u32 umask;
- __u32 padding;
-};
-
-struct fuse_open_out {
- __u64 fh;
- __u32 open_flags;
- __u32 padding;
-};
-
-struct fuse_release_in {
- __u64 fh;
- __u32 flags;
- __u32 release_flags;
- __u64 lock_owner;
-};
-
-struct fuse_flush_in {
- __u64 fh;
- __u32 unused;
- __u32 padding;
- __u64 lock_owner;
-};
-
-struct fuse_read_in {
- __u64 fh;
- __u64 offset;
- __u32 size;
- __u32 read_flags;
- __u64 lock_owner;
- __u32 flags;
- __u32 padding;
-};
-
-#define FUSE_COMPAT_WRITE_IN_SIZE 24
-
-struct fuse_write_in {
- __u64 fh;
- __u64 offset;
- __u32 size;
- __u32 write_flags;
- __u64 lock_owner;
- __u32 flags;
- __u32 padding;
-};
-
-struct fuse_write_out {
- __u32 size;
- __u32 padding;
-};
-
-#define FUSE_COMPAT_STATFS_SIZE 48
-
-struct fuse_statfs_out {
- struct fuse_kstatfs st;
-};
-
-struct fuse_fsync_in {
- __u64 fh;
- __u32 fsync_flags;
- __u32 padding;
-};
-
-struct fuse_setxattr_in {
- __u32 size;
- __u32 flags;
-};
-
-struct fuse_getxattr_in {
- __u32 size;
- __u32 padding;
-};
-
-struct fuse_getxattr_out {
- __u32 size;
- __u32 padding;
-};
-
-struct fuse_lk_in {
- __u64 fh;
- __u64 owner;
- struct fuse_file_lock lk;
- __u32 lk_flags;
- __u32 padding;
-};
-
-struct fuse_lk_out {
- struct fuse_file_lock lk;
-};
-
-struct fuse_access_in {
- __u32 mask;
- __u32 padding;
-};
-
-struct fuse_init_in {
- __u32 major;
- __u32 minor;
- __u32 max_readahead;
- __u32 flags;
-};
-
-struct fuse_init_out {
- __u32 major;
- __u32 minor;
- __u32 max_readahead;
- __u32 flags;
- __u16 max_background;
- __u16 congestion_threshold;
- __u32 max_write;
-};
-
-#define CUSE_INIT_INFO_MAX 4096
-
-struct cuse_init_in {
- __u32 major;
- __u32 minor;
- __u32 unused;
- __u32 flags;
-};
-
-struct cuse_init_out {
- __u32 major;
- __u32 minor;
- __u32 unused;
- __u32 flags;
- __u32 max_read;
- __u32 max_write;
- __u32 dev_major; /* chardev major */
- __u32 dev_minor; /* chardev minor */
- __u32 spare[10];
-};
-
-struct fuse_interrupt_in {
- __u64 unique;
-};
-
-struct fuse_bmap_in {
- __u64 block;
- __u32 blocksize;
- __u32 padding;
-};
-
-struct fuse_bmap_out {
- __u64 block;
-};
-
-struct fuse_ioctl_in {
- __u64 fh;
- __u32 flags;
- __u32 cmd;
- __u64 arg;
- __u32 in_size;
- __u32 out_size;
-};
-
-struct fuse_ioctl_iovec {
- __u64 base;
- __u64 len;
-};
-
-struct fuse_ioctl_out {
- __s32 result;
- __u32 flags;
- __u32 in_iovs;
- __u32 out_iovs;
-};
-
-struct fuse_poll_in {
- __u64 fh;
- __u64 kh;
- __u32 flags;
- __u32 padding;
-};
-
-struct fuse_poll_out {
- __u32 revents;
- __u32 padding;
-};
-
-struct fuse_notify_poll_wakeup_out {
- __u64 kh;
-};
-
-struct fuse_fallocate_in {
- __u64 fh;
- __u64 offset;
- __u64 length;
- __u32 mode;
- __u32 padding;
-};
-
-struct fuse_in_header {
- __u32 len;
- __u32 opcode;
- __u64 unique;
- __u64 nodeid;
- __u32 uid;
- __u32 gid;
- __u32 pid;
- __u32 padding;
-};
-
-struct fuse_out_header {
- __u32 len;
- __s32 error;
- __u64 unique;
-};
-
-struct fuse_dirent {
- __u64 ino;
- __u64 off;
- __u32 namelen;
- __u32 type;
- char name[];
-};
-
-#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
-#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
-#define FUSE_DIRENT_SIZE(d) \
- FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
-
-struct fuse_notify_inval_inode_out {
- __u64 ino;
- __s64 off;
- __s64 len;
-};
-
-struct fuse_notify_inval_entry_out {
- __u64 parent;
- __u32 namelen;
- __u32 padding;
-};
-
-struct fuse_notify_delete_out {
- __u64 parent;
- __u64 child;
- __u32 namelen;
- __u32 padding;
-};
-
-struct fuse_notify_store_out {
- __u64 nodeid;
- __u64 offset;
- __u32 size;
- __u32 padding;
-};
-
-struct fuse_notify_retrieve_out {
- __u64 notify_unique;
- __u64 nodeid;
- __u64 offset;
- __u32 size;
- __u32 padding;
-};
-
-/* Matches the size of fuse_write_in */
-struct fuse_notify_retrieve_in {
- __u64 dummy1;
- __u64 offset;
- __u32 size;
- __u32 dummy2;
- __u64 dummy3;
- __u64 dummy4;
-};
-
-#endif /* _LINUX_FUSE_H */
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 1e5a26d..b0d95ca 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -1,129 +1,8 @@
#ifndef _LINUX_FUTEX_H
#define _LINUX_FUTEX_H
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/futex.h>
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT 0
-#define FUTEX_WAKE 1
-#define FUTEX_FD 2
-#define FUTEX_REQUEUE 3
-#define FUTEX_CMP_REQUEUE 4
-#define FUTEX_WAKE_OP 5
-#define FUTEX_LOCK_PI 6
-#define FUTEX_UNLOCK_PI 7
-#define FUTEX_TRYLOCK_PI 8
-#define FUTEX_WAIT_BITSET 9
-#define FUTEX_WAKE_BITSET 10
-#define FUTEX_WAIT_REQUEUE_PI 11
-#define FUTEX_CMP_REQUEUE_PI 12
-
-#define FUTEX_PRIVATE_FLAG 128
-#define FUTEX_CLOCK_REALTIME 256
-#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \
- FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
- FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
- struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- * size, which glibc will detect)
- */
-struct robust_list_head {
- /*
- * The head of the list. Points back to itself if empty:
- */
- struct robust_list list;
-
- /*
- * This relative offset is set by user-space, it gives the kernel
- * the relative position of the futex field to examine. This way
- * we keep userspace flexible, to freely shape its data-structure,
- * without hardcoding any particular offset into the kernel:
- */
- long futex_offset;
-
- /*
- * The death of the thread may race with userspace setting
- * up a lock's links. So to handle this race, userspace first
- * sets this field to the address of the to-be-taken lock,
- * then does the lock acquire, and then adds itself to the
- * list, and then clears this field. Hence the kernel will
- * always have full knowledge of all locks that the thread
- * _might_ have taken. We check the owner TID in any case,
- * so only truly owned locks will be handled.
- */
- struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS 0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED 0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK 0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT 2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY 0xffffffff
-
-#ifdef __KERNEL__
struct inode;
struct mm_struct;
struct task_struct;
@@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr)
{
}
#endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */
-
-#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
- int oldval = *(int *)UADDR2;
- *(int *)UADDR2 = oldval OP OPARG;
- if (oldval CMP CMPARG)
- wake UADDR2; */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
- (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \
- | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
#endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b986be5..bb7de09 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -1,6 +1,3 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
/*
* Copyright (c) 1999-2002 Vojtech Pavlik
*
@@ -8,8 +5,9 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
-#ifdef __KERNEL__
#include <asm/io.h>
#include <linux/types.h>
#include <linux/list.h>
@@ -17,6 +15,7 @@
#include <linux/device.h>
#include <linux/timer.h>
#include <linux/slab.h>
+#include <uapi/linux/gameport.h>
struct gameport {
@@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv);
module_driver(__gameport_driver, gameport_register_driver, \
gameport_unregister_driver)
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED 0
-#define GAMEPORT_MODE_RAW 1
-#define GAMEPORT_MODE_COOKED 2
-
-#define GAMEPORT_ID_VENDOR_ANALOG 0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS 0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT 0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a
-
-#ifdef __KERNEL__
static inline void gameport_trigger(struct gameport *gameport)
{
@@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne
void gameport_start_polling(struct gameport *gameport);
void gameport_stop_polling(struct gameport *gameport);
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
deleted file mode 100644
index 552c8a0..0000000
--- a/include/linux/gen_stats.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __LINUX_GEN_STATS_H
-#define __LINUX_GEN_STATS_H
-
-#include <linux/types.h>
-
-enum {
- TCA_STATS_UNSPEC,
- TCA_STATS_BASIC,
- TCA_STATS_RATE_EST,
- TCA_STATS_QUEUE,
- TCA_STATS_APP,
- __TCA_STATS_MAX,
-};
-#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
-
-/**
- * struct gnet_stats_basic - byte/packet throughput statistics
- * @bytes: number of seen bytes
- * @packets: number of seen packets
- */
-struct gnet_stats_basic {
- __u64 bytes;
- __u32 packets;
-};
-struct gnet_stats_basic_packed {
- __u64 bytes;
- __u32 packets;
-} __attribute__ ((packed));
-
-/**
- * struct gnet_stats_rate_est - rate estimator
- * @bps: current byte rate
- * @pps: current packet rate
- */
-struct gnet_stats_rate_est {
- __u32 bps;
- __u32 pps;
-};
-
-/**
- * struct gnet_stats_queue - queuing statistics
- * @qlen: queue length
- * @backlog: backlog size of queue
- * @drops: number of dropped packets
- * @requeues: number of requeues
- * @overlimits: number of enqueues over the limit
- */
-struct gnet_stats_queue {
- __u32 qlen;
- __u32 backlog;
- __u32 drops;
- __u32 requeues;
- __u32 overlimits;
-};
-
-/**
- * struct gnet_estimator - rate estimator configuration
- * @interval: sampling period
- * @ewma_log: the log of measurement window weight
- */
-struct gnet_estimator {
- signed char interval;
- unsigned char ewma_log;
-};
-
-
-#endif /* __LINUX_GEN_STATS_H */
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 5ab61c1..55b6857 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,86 +1,8 @@
#ifndef __LINUX_GENERIC_NETLINK_H
#define __LINUX_GENERIC_NETLINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/genetlink.h>
-#define GENL_NAMSIZ 16 /* length of family name */
-
-#define GENL_MIN_ID NLMSG_MIN_TYPE
-#define GENL_MAX_ID 1023
-
-struct genlmsghdr {
- __u8 cmd;
- __u8 version;
- __u16 reserved;
-};
-
-#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM 0x01
-#define GENL_CMD_CAP_DO 0x02
-#define GENL_CMD_CAP_DUMP 0x04
-#define GENL_CMD_CAP_HASPOL 0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE 0
-#define GENL_ID_CTRL NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
- CTRL_CMD_UNSPEC,
- CTRL_CMD_NEWFAMILY,
- CTRL_CMD_DELFAMILY,
- CTRL_CMD_GETFAMILY,
- CTRL_CMD_NEWOPS,
- CTRL_CMD_DELOPS,
- CTRL_CMD_GETOPS,
- CTRL_CMD_NEWMCAST_GRP,
- CTRL_CMD_DELMCAST_GRP,
- CTRL_CMD_GETMCAST_GRP, /* unused */
- __CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
- CTRL_ATTR_UNSPEC,
- CTRL_ATTR_FAMILY_ID,
- CTRL_ATTR_FAMILY_NAME,
- CTRL_ATTR_VERSION,
- CTRL_ATTR_HDRSIZE,
- CTRL_ATTR_MAXATTR,
- CTRL_ATTR_OPS,
- CTRL_ATTR_MCAST_GROUPS,
- __CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
- CTRL_ATTR_OP_UNSPEC,
- CTRL_ATTR_OP_ID,
- CTRL_ATTR_OP_FLAGS,
- __CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
- CTRL_ATTR_MCAST_GRP_UNSPEC,
- CTRL_ATTR_MCAST_GRP_NAME,
- CTRL_ATTR_MCAST_GRP_ID,
- __CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
/* All generic netlink requests are serialized by a global lock. */
extern void genl_lock(void);
@@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void);
#define MODULE_ALIAS_GENL_FAMILY(family)\
MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family)
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
deleted file mode 100644
index b2de1f9..0000000
--- a/include/linux/gfs2_ondisk.h
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef __GFS2_ONDISK_DOT_H__
-#define __GFS2_ONDISK_DOT_H__
-
-#include <linux/types.h>
-
-#define GFS2_MAGIC 0x01161970
-#define GFS2_BASIC_BLOCK 512
-#define GFS2_BASIC_BLOCK_SHIFT 9
-
-/* Lock numbers of the LM_TYPE_NONDISK type */
-
-#define GFS2_MOUNT_LOCK 0
-#define GFS2_LIVE_LOCK 1
-#define GFS2_TRANS_LOCK 2
-#define GFS2_RENAME_LOCK 3
-#define GFS2_CONTROL_LOCK 4
-#define GFS2_MOUNTED_LOCK 5
-
-/* Format numbers for various metadata types */
-
-#define GFS2_FORMAT_NONE 0
-#define GFS2_FORMAT_SB 100
-#define GFS2_FORMAT_RG 200
-#define GFS2_FORMAT_RB 300
-#define GFS2_FORMAT_DI 400
-#define GFS2_FORMAT_IN 500
-#define GFS2_FORMAT_LF 600
-#define GFS2_FORMAT_JD 700
-#define GFS2_FORMAT_LH 800
-#define GFS2_FORMAT_LD 900
-#define GFS2_FORMAT_LB 1000
-#define GFS2_FORMAT_EA 1600
-#define GFS2_FORMAT_ED 1700
-#define GFS2_FORMAT_QC 1400
-/* These are format numbers for entities contained in files */
-#define GFS2_FORMAT_RI 1100
-#define GFS2_FORMAT_DE 1200
-#define GFS2_FORMAT_QU 1500
-/* These are part of the superblock */
-#define GFS2_FORMAT_FS 1801
-#define GFS2_FORMAT_MULTI 1900
-
-/*
- * An on-disk inode number
- */
-
-struct gfs2_inum {
- __be64 no_formal_ino;
- __be64 no_addr;
-};
-
-/*
- * Generic metadata head structure
- * Every inplace buffer logged in the journal must start with this.
- */
-
-#define GFS2_METATYPE_NONE 0
-#define GFS2_METATYPE_SB 1
-#define GFS2_METATYPE_RG 2
-#define GFS2_METATYPE_RB 3
-#define GFS2_METATYPE_DI 4
-#define GFS2_METATYPE_IN 5
-#define GFS2_METATYPE_LF 6
-#define GFS2_METATYPE_JD 7
-#define GFS2_METATYPE_LH 8
-#define GFS2_METATYPE_LD 9
-#define GFS2_METATYPE_LB 12
-#define GFS2_METATYPE_EA 10
-#define GFS2_METATYPE_ED 11
-#define GFS2_METATYPE_QC 14
-
-struct gfs2_meta_header {
- __be32 mh_magic;
- __be32 mh_type;
- __be64 __pad0; /* Was generation number in gfs1 */
- __be32 mh_format;
- /* This union is to keep userspace happy */
- union {
- __be32 mh_jid; /* Was incarnation number in gfs1 */
- __be32 __pad1;
- };
-};
-
-/*
- * super-block structure
- *
- * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes)
- *
- * Order is important, need to be able to read old superblocks to do on-disk
- * version upgrades.
- */
-
-/* Address of superblock in GFS2 basic blocks */
-#define GFS2_SB_ADDR 128
-
-/* The lock number for the superblock (must be zero) */
-#define GFS2_SB_LOCK 0
-
-/* Requirement: GFS2_LOCKNAME_LEN % 8 == 0
- Includes: the fencing zero at the end */
-#define GFS2_LOCKNAME_LEN 64
-
-struct gfs2_sb {
- struct gfs2_meta_header sb_header;
-
- __be32 sb_fs_format;
- __be32 sb_multihost_format;
- __u32 __pad0; /* Was superblock flags in gfs1 */
-
- __be32 sb_bsize;
- __be32 sb_bsize_shift;
- __u32 __pad1; /* Was journal segment size in gfs1 */
-
- struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */
- struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */
- struct gfs2_inum sb_root_dir;
-
- char sb_lockproto[GFS2_LOCKNAME_LEN];
- char sb_locktable[GFS2_LOCKNAME_LEN];
-
- struct gfs2_inum __pad3; /* Was quota inode in gfs1 */
- struct gfs2_inum __pad4; /* Was licence inode in gfs1 */
-#define GFS2_HAS_UUID 1
- __u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */
-};
-
-/*
- * resource index structure
- */
-
-struct gfs2_rindex {
- __be64 ri_addr; /* grp block disk address */
- __be32 ri_length; /* length of rgrp header in fs blocks */
- __u32 __pad;
-
- __be64 ri_data0; /* first data location */
- __be32 ri_data; /* num of data blocks in rgrp */
-
- __be32 ri_bitbytes; /* number of bytes in data bitmaps */
-
- __u8 ri_reserved[64];
-};
-
-/*
- * resource group header structure
- */
-
-/* Number of blocks per byte in rgrp */
-#define GFS2_NBBY 4
-#define GFS2_BIT_SIZE 2
-#define GFS2_BIT_MASK 0x00000003
-
-#define GFS2_BLKST_FREE 0
-#define GFS2_BLKST_USED 1
-#define GFS2_BLKST_UNLINKED 2
-#define GFS2_BLKST_DINODE 3
-
-#define GFS2_RGF_JOURNAL 0x00000001
-#define GFS2_RGF_METAONLY 0x00000002
-#define GFS2_RGF_DATAONLY 0x00000004
-#define GFS2_RGF_NOALLOC 0x00000008
-#define GFS2_RGF_TRIMMED 0x00000010
-
-struct gfs2_rgrp_lvb {
- __be32 rl_magic;
- __be32 rl_flags;
- __be32 rl_free;
- __be32 rl_dinodes;
- __be64 rl_igeneration;
- __be32 rl_unlinked;
- __be32 __pad;
-};
-
-struct gfs2_rgrp {
- struct gfs2_meta_header rg_header;
-
- __be32 rg_flags;
- __be32 rg_free;
- __be32 rg_dinodes;
- __be32 __pad;
- __be64 rg_igeneration;
-
- __u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */
-};
-
-/*
- * quota structure
- */
-
-struct gfs2_quota {
- __be64 qu_limit;
- __be64 qu_warn;
- __be64 qu_value;
- __u8 qu_reserved[64];
-};
-
-/*
- * dinode structure
- */
-
-#define GFS2_MAX_META_HEIGHT 10
-#define GFS2_DIR_MAX_DEPTH 17
-
-#define DT2IF(dt) (((dt) << 12) & S_IFMT)
-#define IF2DT(sif) (((sif) & S_IFMT) >> 12)
-
-enum {
- gfs2fl_Jdata = 0,
- gfs2fl_ExHash = 1,
- gfs2fl_Unused = 2,
- gfs2fl_EaIndirect = 3,
- gfs2fl_Directio = 4,
- gfs2fl_Immutable = 5,
- gfs2fl_AppendOnly = 6,
- gfs2fl_NoAtime = 7,
- gfs2fl_Sync = 8,
- gfs2fl_System = 9,
- gfs2fl_TopLevel = 10,
- gfs2fl_TruncInProg = 29,
- gfs2fl_InheritDirectio = 30,
- gfs2fl_InheritJdata = 31,
-};
-
-/* Dinode flags */
-#define GFS2_DIF_JDATA 0x00000001
-#define GFS2_DIF_EXHASH 0x00000002
-#define GFS2_DIF_UNUSED 0x00000004 /* only in gfs1 */
-#define GFS2_DIF_EA_INDIRECT 0x00000008
-#define GFS2_DIF_DIRECTIO 0x00000010
-#define GFS2_DIF_IMMUTABLE 0x00000020
-#define GFS2_DIF_APPENDONLY 0x00000040
-#define GFS2_DIF_NOATIME 0x00000080
-#define GFS2_DIF_SYNC 0x00000100
-#define GFS2_DIF_SYSTEM 0x00000200 /* New in gfs2 */
-#define GFS2_DIF_TOPDIR 0x00000400 /* New in gfs2 */
-#define GFS2_DIF_TRUNC_IN_PROG 0x20000000 /* New in gfs2 */
-#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 /* only in gfs1 */
-#define GFS2_DIF_INHERIT_JDATA 0x80000000
-
-struct gfs2_dinode {
- struct gfs2_meta_header di_header;
-
- struct gfs2_inum di_num;
-
- __be32 di_mode; /* mode of file */
- __be32 di_uid; /* owner's user id */
- __be32 di_gid; /* owner's group id */
- __be32 di_nlink; /* number of links to this file */
- __be64 di_size; /* number of bytes in file */
- __be64 di_blocks; /* number of blocks in file */
- __be64 di_atime; /* time last accessed */
- __be64 di_mtime; /* time last modified */
- __be64 di_ctime; /* time last changed */
- __be32 di_major; /* device major number */
- __be32 di_minor; /* device minor number */
-
- /* This section varies from gfs1. Padding added to align with
- * remainder of dinode
- */
- __be64 di_goal_meta; /* rgrp to alloc from next */
- __be64 di_goal_data; /* data block goal */
- __be64 di_generation; /* generation number for NFS */
-
- __be32 di_flags; /* GFS2_DIF_... */
- __be32 di_payload_format; /* GFS2_FORMAT_... */
- __u16 __pad1; /* Was ditype in gfs1 */
- __be16 di_height; /* height of metadata */
- __u32 __pad2; /* Unused incarnation number from gfs1 */
-
- /* These only apply to directories */
- __u16 __pad3; /* Padding */
- __be16 di_depth; /* Number of bits in the table */
- __be32 di_entries; /* The number of entries in the directory */
-
- struct gfs2_inum __pad4; /* Unused even in current gfs1 */
-
- __be64 di_eattr; /* extended attribute block number */
- __be32 di_atime_nsec; /* nsec portion of atime */
- __be32 di_mtime_nsec; /* nsec portion of mtime */
- __be32 di_ctime_nsec; /* nsec portion of ctime */
-
- __u8 di_reserved[44];
-};
-
-/*
- * directory structure - many of these per directory file
- */
-
-#define GFS2_FNAMESIZE 255
-#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7)
-
-struct gfs2_dirent {
- struct gfs2_inum de_inum;
- __be32 de_hash;
- __be16 de_rec_len;
- __be16 de_name_len;
- __be16 de_type;
- __u8 __pad[14];
-};
-
-/*
- * Header of leaf directory nodes
- */
-
-struct gfs2_leaf {
- struct gfs2_meta_header lf_header;
-
- __be16 lf_depth; /* Depth of leaf */
- __be16 lf_entries; /* Number of dirents in leaf */
- __be32 lf_dirent_format; /* Format of the dirents */
- __be64 lf_next; /* Next leaf, if overflow */
-
- __u8 lf_reserved[64];
-};
-
-/*
- * Extended attribute header format
- *
- * This works in a similar way to dirents. There is a fixed size header
- * followed by a variable length section made up of the name and the
- * associated data. In the case of a "stuffed" entry, the value is
- * inline directly after the name, the ea_num_ptrs entry will be
- * zero in that case. For non-"stuffed" entries, there will be
- * a set of pointers (aligned to 8 byte boundary) to the block(s)
- * containing the value.
- *
- * The blocks containing the values and the blocks containing the
- * extended attribute headers themselves all start with the common
- * metadata header. Each inode, if it has extended attributes, will
- * have either a single block containing the extended attribute headers
- * or a single indirect block pointing to blocks containing the
- * extended attribure headers.
- *
- * The maximim size of the data part of an extended attribute is 64k
- * so the number of blocks required depends upon block size. Since the
- * block size also determines the number of pointers in an indirect
- * block, its a fairly complicated calculation to work out the maximum
- * number of blocks that an inode may have relating to extended attributes.
- *
- */
-
-#define GFS2_EA_MAX_NAME_LEN 255
-#define GFS2_EA_MAX_DATA_LEN 65536
-
-#define GFS2_EATYPE_UNUSED 0
-#define GFS2_EATYPE_USR 1
-#define GFS2_EATYPE_SYS 2
-#define GFS2_EATYPE_SECURITY 3
-
-#define GFS2_EATYPE_LAST 3
-#define GFS2_EATYPE_VALID(x) ((x) <= GFS2_EATYPE_LAST)
-
-#define GFS2_EAFLAG_LAST 0x01 /* last ea in block */
-
-struct gfs2_ea_header {
- __be32 ea_rec_len;
- __be32 ea_data_len;
- __u8 ea_name_len; /* no NULL pointer after the string */
- __u8 ea_type; /* GFS2_EATYPE_... */
- __u8 ea_flags; /* GFS2_EAFLAG_... */
- __u8 ea_num_ptrs;
- __u32 __pad;
-};
-
-/*
- * Log header structure
- */
-
-#define GFS2_LOG_HEAD_UNMOUNT 0x00000001 /* log is clean */
-
-struct gfs2_log_header {
- struct gfs2_meta_header lh_header;
-
- __be64 lh_sequence; /* Sequence number of this transaction */
- __be32 lh_flags; /* GFS2_LOG_HEAD_... */
- __be32 lh_tail; /* Block number of log tail */
- __be32 lh_blkno;
- __be32 lh_hash;
-};
-
-/*
- * Log type descriptor
- */
-
-#define GFS2_LOG_DESC_METADATA 300
-/* ld_data1 is the number of metadata blocks in the descriptor.
- ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_REVOKE 301
-/* ld_data1 is the number of revoke blocks in the descriptor.
- ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_JDATA 302
-/* ld_data1 is the number of data blocks in the descriptor.
- ld_data2 is unused. */
-
-struct gfs2_log_descriptor {
- struct gfs2_meta_header ld_header;
-
- __be32 ld_type; /* GFS2_LOG_DESC_... */
- __be32 ld_length; /* Number of buffers in this chunk */
- __be32 ld_data1; /* descriptor-specific field */
- __be32 ld_data2; /* descriptor-specific field */
-
- __u8 ld_reserved[32];
-};
-
-/*
- * Inum Range
- * Describe a range of formal inode numbers allocated to
- * one machine to assign to inodes.
- */
-
-#define GFS2_INUM_QUANTUM 1048576
-
-struct gfs2_inum_range {
- __be64 ir_start;
- __be64 ir_length;
-};
-
-/*
- * Statfs change
- * Describes an change to the pool of free and allocated
- * blocks.
- */
-
-struct gfs2_statfs_change {
- __be64 sc_total;
- __be64 sc_free;
- __be64 sc_dinodes;
-};
-
-/*
- * Quota change
- * Describes an allocation change for a particular
- * user or group.
- */
-
-#define GFS2_QCF_USER 0x00000001
-
-struct gfs2_quota_change {
- __be64 qc_change;
- __be32 qc_flags; /* GFS2_QCF_... */
- __be32 qc_id;
-};
-
-struct gfs2_quota_lvb {
- __be32 qb_magic;
- __u32 __pad;
- __be64 qb_limit; /* Hard limit of # blocks to alloc */
- __be64 qb_warn; /* Warn user when alloc is above this # */
- __be64 qb_value; /* Current # blocks allocated */
-};
-
-#endif /* __GFS2_ONDISK_DOT_H__ */
diff --git a/include/linux/gigaset_dev.h b/include/linux/gigaset_dev.h
deleted file mode 100644
index 258ba82..0000000
--- a/include/linux/gigaset_dev.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * interface to user space for the gigaset driver
- *
- * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- * =====================================================================
- */
-
-#ifndef GIGASET_INTERFACE_H
-#define GIGASET_INTERFACE_H
-
-#include <linux/ioctl.h>
-
-/* The magic IOCTL value for this interface. */
-#define GIGASET_IOCTL 0x47
-
-/* enable/disable device control via character device (lock out ISDN subsys) */
-#define GIGASET_REDIR _IOWR(GIGASET_IOCTL, 0, int)
-
-/* enable adapter configuration mode (M10x only) */
-#define GIGASET_CONFIG _IOWR(GIGASET_IOCTL, 1, int)
-
-/* set break characters (M105 only) */
-#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
-
-/* get version information selected by arg[0] */
-#define GIGASET_VERSION _IOWR(GIGASET_IOCTL, 3, unsigned[4])
-/* values for GIGASET_VERSION arg[0] */
-#define GIGVER_DRIVER 0 /* get driver version */
-#define GIGVER_COMPAT 1 /* get interface compatibility version */
-#define GIGVER_FWBASE 2 /* get base station firmware version */
-
-#endif
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ee275c8..1acb144 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -7,24 +7,14 @@
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
-
#ifndef __HDLC_H
#define __HDLC_H
-#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/hdlc/ioctl.h>
+#include <uapi/linux/hdlc.h>
/* This structure is a private property of HDLC protocols.
Hardware drivers have no interest here */
@@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
return htons(ETH_P_HDLC);
}
-#endif /* __KERNEL */
#endif /* __HDLC_H */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index c010b4a..be3be25 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -3,110 +3,14 @@
* The Linux soundcard driver for 1200 baud and 9600 baud packet radio
* (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
*/
-
#ifndef _HDLCDRV_H
#define _HDLCDRV_H
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
- int iobase;
- int irq;
- int dma;
- int dma2;
- int seriobase;
- int pariobase;
- int midiiobase;
-};
-
-struct hdlcdrv_channel_params {
- int tx_delay; /* the transmitter keyup delay in 10ms units */
- int tx_tail; /* the transmitter keyoff delay in 10ms units */
- int slottime; /* the slottime in 10ms; usually 10 = 100ms */
- int ppersist; /* the p-persistence 0..255 */
- int fulldup; /* some driver do not support full duplex, setting */
- /* this just makes them send even if DCD is on */
-};
-
-struct hdlcdrv_old_channel_state {
- int ptt;
- int dcd;
- int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- int ptt;
- int dcd;
- int ptt_keyed;
- unsigned long tx_packets;
- unsigned long tx_errors;
- unsigned long rx_packets;
- unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
- int cmd;
- union {
- struct hdlcdrv_params mp;
- struct hdlcdrv_channel_params cp;
- struct hdlcdrv_channel_state cs;
- struct hdlcdrv_old_channel_state ocs;
- unsigned int calibrate;
- unsigned char bits;
- char modename[128];
- char drivername[32];
- } data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR 0
-#define HDLCDRVCTL_SETMODEMPAR 1
-#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR 10
-#define HDLCDRVCTL_SETCHANNELPAR 11
-#define HDLCDRVCTL_OLDGETSTAT 20
-#define HDLCDRVCTL_CALIBRATE 21
-#define HDLCDRVCTL_GETSTAT 22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES 30
-#define HDLCDRVCTL_GETBITS 31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE 40
-#define HDLCDRVCTL_SETMODE 41
-#define HDLCDRVCTL_MODELIST 42
-#define HDLCDRVCTL_DRIVERNAME 43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE (1<<0)
-#define HDLCDRV_PARMASK_IRQ (1<<1)
-#define HDLCDRV_PARMASK_DMA (1<<2)
-#define HDLCDRV_PARMASK_DMA2 (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
#include <linux/if.h>
#include <linux/spinlock.h>
+#include <uapi/linux/hdlcdrv.h>
#define HDLCDRV_MAGIC 0x5ac6e778
#define HDLCDRV_HDLCBUFFER 32 /* should be a power of 2 for speed reasons */
@@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev);
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
#endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
deleted file mode 100644
index 29ee287..0000000
--- a/include/linux/hdreg.h
+++ /dev/null
@@ -1,658 +0,0 @@
-#ifndef _LINUX_HDREG_H
-#define _LINUX_HDREG_H
-
-#include <linux/types.h>
-
-/*
- * Command Header sizes for IOCTL commands
- */
-
-#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8))
-#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
-#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
-
-#define IDE_DRIVE_TASK_NO_DATA 0
-#ifndef __KERNEL__
-#define IDE_DRIVE_TASK_INVALID -1
-#define IDE_DRIVE_TASK_SET_XFER 1
-#define IDE_DRIVE_TASK_IN 2
-#define IDE_DRIVE_TASK_OUT 3
-#endif
-#define IDE_DRIVE_TASK_RAW_WRITE 4
-
-/*
- * Define standard taskfile in/out register
- */
-#define IDE_TASKFILE_STD_IN_FLAGS 0xFE
-#define IDE_HOB_STD_IN_FLAGS 0x3C
-#ifndef __KERNEL__
-#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE
-#define IDE_HOB_STD_OUT_FLAGS 0x3C
-
-typedef unsigned char task_ioreg_t;
-typedef unsigned long sata_ioreg_t;
-#endif
-
-typedef union ide_reg_valid_s {
- unsigned all : 16;
- struct {
- unsigned data : 1;
- unsigned error_feature : 1;
- unsigned sector : 1;
- unsigned nsector : 1;
- unsigned lcyl : 1;
- unsigned hcyl : 1;
- unsigned select : 1;
- unsigned status_command : 1;
-
- unsigned data_hob : 1;
- unsigned error_feature_hob : 1;
- unsigned sector_hob : 1;
- unsigned nsector_hob : 1;
- unsigned lcyl_hob : 1;
- unsigned hcyl_hob : 1;
- unsigned select_hob : 1;
- unsigned control_hob : 1;
- } b;
-} ide_reg_valid_t;
-
-typedef struct ide_task_request_s {
- __u8 io_ports[8];
- __u8 hob_ports[8]; /* bytes 6 and 7 are unused */
- ide_reg_valid_t out_flags;
- ide_reg_valid_t in_flags;
- int data_phase;
- int req_cmd;
- unsigned long out_size;
- unsigned long in_size;
-} ide_task_request_t;
-
-typedef struct ide_ioctl_request_s {
- ide_task_request_t *task_request;
- unsigned char *out_buffer;
- unsigned char *in_buffer;
-} ide_ioctl_request_t;
-
-struct hd_drive_cmd_hdr {
- __u8 command;
- __u8 sector_number;
- __u8 feature;
- __u8 sector_count;
-};
-
-#ifndef __KERNEL__
-typedef struct hd_drive_task_hdr {
- __u8 data;
- __u8 feature;
- __u8 sector_count;
- __u8 sector_number;
- __u8 low_cylinder;
- __u8 high_cylinder;
- __u8 device_head;
- __u8 command;
-} task_struct_t;
-
-typedef struct hd_drive_hob_hdr {
- __u8 data;
- __u8 feature;
- __u8 sector_count;
- __u8 sector_number;
- __u8 low_cylinder;
- __u8 high_cylinder;
- __u8 device_head;
- __u8 control;
-} hob_struct_t;
-#endif
-
-#define TASKFILE_NO_DATA 0x0000
-
-#define TASKFILE_IN 0x0001
-#define TASKFILE_MULTI_IN 0x0002
-
-#define TASKFILE_OUT 0x0004
-#define TASKFILE_MULTI_OUT 0x0008
-#define TASKFILE_IN_OUT 0x0010
-
-#define TASKFILE_IN_DMA 0x0020
-#define TASKFILE_OUT_DMA 0x0040
-#define TASKFILE_IN_DMAQ 0x0080
-#define TASKFILE_OUT_DMAQ 0x0100
-
-#ifndef __KERNEL__
-#define TASKFILE_P_IN 0x0200
-#define TASKFILE_P_OUT 0x0400
-#define TASKFILE_P_IN_DMA 0x0800
-#define TASKFILE_P_OUT_DMA 0x1000
-#define TASKFILE_P_IN_DMAQ 0x2000
-#define TASKFILE_P_OUT_DMAQ 0x4000
-#define TASKFILE_48 0x8000
-#define TASKFILE_INVALID 0x7fff
-#endif
-
-#ifndef __KERNEL__
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP 0x00
-/*
- * 0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
-/*
- * 0x04->0x07 Reserved
- */
-#define WIN_SRST 0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET 0x08
-/*
- * 0x09->0x0F Reserved
- */
-#define WIN_RECAL 0x10
-#define WIN_RESTORE WIN_RECAL
-/*
- * 0x10->0x1F Reserved
- */
-#define WIN_READ 0x20 /* 28-Bit */
-#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG 0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT 0x24 /* 48-Bit */
-#define WIN_READDMA_EXT 0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
-/*
- * 0x28
- */
-#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
-/*
- * 0x2A->0x2F Reserved
- */
-#define WIN_WRITE 0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG 0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT 0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
-/*
- * 0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
-/*
- * 0x3D->0x3F Reserved
- */
-#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
-#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
-/*
- * 0x43->0x4F Reserved
- */
-#define WIN_FORMAT 0x50
-/*
- * 0x51->0x5F Reserved
- */
-#define WIN_INIT 0x60
-/*
- * 0x61->0x5F Reserved
- */
-#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
-
-#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE 0x90
-#define WIN_SPECIFY 0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE 0x92
-#define WIN_STANDBYNOW2 0x94
-#define WIN_STANDBY2 0x96
-#define WIN_SETIDLE2 0x97
-#define WIN_CHECKPOWERMODE2 0x98
-#define WIN_SLEEPNOW2 0x99
-/*
- * 0x9A VENDOR
- */
-#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
-#define WIN_QUEUED_SERVICE 0xA2
-#define WIN_SMART 0xB0 /* self-monitoring and reporting */
-#define CFA_ERASE_SECTORS 0xC0
-#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS 0xDA
-#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT 0xDC
-#define WIN_PREBOOT 0xDD
-#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1 0xE0
-#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1 0xE3
-#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1 0xE5
-#define WIN_SLEEPNOW1 0xE6
-#define WIN_FLUSH_CACHE 0xE7
-#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
- /* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
-#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
-#define WIN_MEDIAEJECT 0xED
-#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES 0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST 0xF0
-#define WIN_SECURITY_SET_PASS 0xF1
-#define WIN_SECURITY_UNLOCK 0xF2
-#define WIN_SECURITY_ERASE_PREPARE 0xF3
-#define WIN_SECURITY_ERASE_UNIT 0xF4
-#define WIN_SECURITY_FREEZE_LOCK 0xF5
-#define WIN_SECURITY_DISABLE 0xF6
-#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
-#define WIN_SET_MAX 0xF9
-#define DISABLE_SEAGATE 0xFB
-
-/* WIN_SMART sub-commands */
-
-#define SMART_READ_VALUES 0xD0
-#define SMART_READ_THRESHOLDS 0xD1
-#define SMART_AUTOSAVE 0xD2
-#define SMART_SAVE 0xD3
-#define SMART_IMMEDIATE_OFFLINE 0xD4
-#define SMART_READ_LOG_SECTOR 0xD5
-#define SMART_WRITE_LOG_SECTOR 0xD6
-#define SMART_WRITE_THRESHOLDS 0xD7
-#define SMART_ENABLE 0xD8
-#define SMART_DISABLE 0xD9
-#define SMART_STATUS 0xDA
-#define SMART_AUTO_OFFLINE 0xDB
-
-/* Password used in TF4 & TF5 executing SMART commands */
-
-#define SMART_LCYL_PASS 0x4F
-#define SMART_HCYL_PASS 0xC2
-
-/* WIN_SETFEATURES sub-commands */
-#define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */
-#define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */
-#define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */
-#define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */
-#define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */
-#define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */
-#define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */
-#define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */
-#define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */
-#define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */
-#define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */
-#define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */
-#define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */
-#define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */
-#define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */
-#define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */
-#define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */
-#define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */
-#define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */
-#define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */
-#define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */
-#define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */
-#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
-#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
-#define SETFEATURES_EN_REST 0xAC /* ATA-1 */
-#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */
-#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
-#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
-#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
-#define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */
-#define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */
-
-/* WIN_SECURITY sub-commands */
-
-#define SECURITY_SET_PASSWORD 0xBA
-#define SECURITY_UNLOCK 0xBB
-#define SECURITY_ERASE_PREPARE 0xBC
-#define SECURITY_ERASE_UNIT 0xBD
-#define SECURITY_FREEZE_LOCK 0xBE
-#define SECURITY_DISABLE_PASSWORD 0xBF
-#endif /* __KERNEL__ */
-
-struct hd_geometry {
- unsigned char heads;
- unsigned char sectors;
- unsigned short cylinders;
- unsigned long start;
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
-#define HDIO_GETGEO 0x0301 /* get device geometry */
-#define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
-#define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
-#define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */
-
-#define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */
-
-#define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */
-#define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
-#define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
-#define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
-#define HDIO_GET_DMA 0x030b /* get use-dma flag */
-#define HDIO_GET_NICE 0x030c /* get nice flags */
-#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
-#define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */
-#define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */
-#define HDIO_GET_ADDRESS 0x0310 /* */
-
-#define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */
-#define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */
-#define HDIO_DRIVE_RESET 0x031c /* execute a device reset */
-#define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */
-#define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */
-#define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
-#define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
-
-/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
-#define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
-#define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
-#define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
-#define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
-#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
-#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
-#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
-#ifndef __KERNEL__
-#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
-#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
-#endif
-#define HDIO_SET_NICE 0x0329 /* set nice flags */
-#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
-#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
-#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
-#define HDIO_SET_QDMA 0x032e /* change use-qdma flag */
-#define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */
-
-/* bus states */
-enum {
- BUSSTATE_OFF = 0,
- BUSSTATE_ON,
- BUSSTATE_TRISTATE
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
-/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
-/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
-/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
-/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
-
-#define __NEW_HD_DRIVE_ID
-
-#ifndef __KERNEL__
-/*
- * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
- *
- * If you change something here, please remember to update fix_driveid() in
- * ide/probe.c.
- */
-struct hd_driveid {
- unsigned short config; /* lots of obsolete bit flags */
- unsigned short cyls; /* Obsolete, "physical" cyls */
- unsigned short reserved2; /* reserved (word 2) */
- unsigned short heads; /* Obsolete, "physical" heads */
- unsigned short track_bytes; /* unformatted bytes per track */
- unsigned short sector_bytes; /* unformatted bytes per sector */
- unsigned short sectors; /* Obsolete, "physical" sectors per track */
- unsigned short vendor0; /* vendor unique */
- unsigned short vendor1; /* vendor unique */
- unsigned short vendor2; /* Retired vendor unique */
- unsigned char serial_no[20]; /* 0 = not_specified */
- unsigned short buf_type; /* Retired */
- unsigned short buf_size; /* Retired, 512 byte increments
- * 0 = not_specified
- */
- unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */
- unsigned char fw_rev[8]; /* 0 = not_specified */
- unsigned char model[40]; /* 0 = not_specified */
- unsigned char max_multsect; /* 0=not_implemented */
- unsigned char vendor3; /* vendor unique */
- unsigned short dword_io; /* 0=not_implemented; 1=implemented */
- unsigned char vendor4; /* vendor unique */
- unsigned char capability; /* (upper byte of word 49)
- * 3: IORDYsup
- * 2: IORDYsw
- * 1: LBA
- * 0: DMA
- */
- unsigned short reserved50; /* reserved (word 50) */
- unsigned char vendor5; /* Obsolete, vendor unique */
- unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */
- unsigned char vendor6; /* Obsolete, vendor unique */
- unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */
- unsigned short field_valid; /* (word 53)
- * 2: ultra_ok word 88
- * 1: eide_ok words 64-70
- * 0: cur_ok words 54-58
- */
- unsigned short cur_cyls; /* Obsolete, logical cylinders */
- unsigned short cur_heads; /* Obsolete, l heads */
- unsigned short cur_sectors; /* Obsolete, l sectors per track */
- unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */
- unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */
- unsigned char multsect; /* current multiple sector count */
- unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
- unsigned int lba_capacity; /* Obsolete, total number of sectors */
- unsigned short dma_1word; /* Obsolete, single-word dma info */
- unsigned short dma_mword; /* multiple-word dma info */
- unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */
- unsigned short eide_dma_min; /* min mword dma cycle time (ns) */
- unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */
- unsigned short eide_pio; /* min cycle time (ns), no IORDY */
- unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */
- unsigned short words69_70[2]; /* reserved words 69-70
- * future command overlap and queuing
- */
- unsigned short words71_74[4]; /* reserved words 71-74
- * for IDENTIFY PACKET DEVICE command
- */
- unsigned short queue_depth; /* (word 75)
- * 15:5 reserved
- * 4:0 Maximum queue depth -1
- */
- unsigned short words76_79[4]; /* reserved words 76-79 */
- unsigned short major_rev_num; /* (word 80) */
- unsigned short minor_rev_num; /* (word 81) */
- unsigned short command_set_1; /* (word 82) supported
- * 15: Obsolete
- * 14: NOP command
- * 13: READ_BUFFER
- * 12: WRITE_BUFFER
- * 11: Obsolete
- * 10: Host Protected Area
- * 9: DEVICE Reset
- * 8: SERVICE Interrupt
- * 7: Release Interrupt
- * 6: look-ahead
- * 5: write cache
- * 4: PACKET Command
- * 3: Power Management Feature Set
- * 2: Removable Feature Set
- * 1: Security Feature Set
- * 0: SMART Feature Set
- */
- unsigned short command_set_2; /* (word 83)
- * 15: Shall be ZERO
- * 14: Shall be ONE
- * 13: FLUSH CACHE EXT
- * 12: FLUSH CACHE
- * 11: Device Configuration Overlay
- * 10: 48-bit Address Feature Set
- * 9: Automatic Acoustic Management
- * 8: SET MAX security
- * 7: reserved 1407DT PARTIES
- * 6: SetF sub-command Power-Up
- * 5: Power-Up in Standby Feature Set
- * 4: Removable Media Notification
- * 3: APM Feature Set
- * 2: CFA Feature Set
- * 1: READ/WRITE DMA QUEUED
- * 0: Download MicroCode
- */
- unsigned short cfsse; /* (word 84)
- * cmd set-feature supported extensions
- * 15: Shall be ZERO
- * 14: Shall be ONE
- * 13:6 reserved
- * 5: General Purpose Logging
- * 4: Streaming Feature Set
- * 3: Media Card Pass Through
- * 2: Media Serial Number Valid
- * 1: SMART selt-test supported
- * 0: SMART error logging
- */
- unsigned short cfs_enable_1; /* (word 85)
- * command set-feature enabled
- * 15: Obsolete
- * 14: NOP command
- * 13: READ_BUFFER
- * 12: WRITE_BUFFER
- * 11: Obsolete
- * 10: Host Protected Area
- * 9: DEVICE Reset
- * 8: SERVICE Interrupt
- * 7: Release Interrupt
- * 6: look-ahead
- * 5: write cache
- * 4: PACKET Command
- * 3: Power Management Feature Set
- * 2: Removable Feature Set
- * 1: Security Feature Set
- * 0: SMART Feature Set
- */
- unsigned short cfs_enable_2; /* (word 86)
- * command set-feature enabled
- * 15: Shall be ZERO
- * 14: Shall be ONE
- * 13: FLUSH CACHE EXT
- * 12: FLUSH CACHE
- * 11: Device Configuration Overlay
- * 10: 48-bit Address Feature Set
- * 9: Automatic Acoustic Management
- * 8: SET MAX security
- * 7: reserved 1407DT PARTIES
- * 6: SetF sub-command Power-Up
- * 5: Power-Up in Standby Feature Set
- * 4: Removable Media Notification
- * 3: APM Feature Set
- * 2: CFA Feature Set
- * 1: READ/WRITE DMA QUEUED
- * 0: Download MicroCode
- */
- unsigned short csf_default; /* (word 87)
- * command set-feature default
- * 15: Shall be ZERO
- * 14: Shall be ONE
- * 13:6 reserved
- * 5: General Purpose Logging enabled
- * 4: Valid CONFIGURE STREAM executed
- * 3: Media Card Pass Through enabled
- * 2: Media Serial Number Valid
- * 1: SMART selt-test supported
- * 0: SMART error logging
- */
- unsigned short dma_ultra; /* (word 88) */
- unsigned short trseuc; /* time required for security erase */
- unsigned short trsEuc; /* time required for enhanced erase */
- unsigned short CurAPMvalues; /* current APM values */
- unsigned short mprc; /* master password revision code */
- unsigned short hw_config; /* hardware config (word 93)
- * 15: Shall be ZERO
- * 14: Shall be ONE
- * 13:
- * 12:
- * 11:
- * 10:
- * 9:
- * 8:
- * 7:
- * 6:
- * 5:
- * 4:
- * 3:
- * 2:
- * 1:
- * 0: Shall be ONE
- */
- unsigned short acoustic; /* (word 94)
- * 15:8 Vendor's recommended value
- * 7:0 current value
- */
- unsigned short msrqs; /* min stream request size */
- unsigned short sxfert; /* stream transfer time */
- unsigned short sal; /* stream access latency */
- unsigned int spg; /* stream performance granularity */
- unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
- unsigned short words104_125[22];/* reserved words 104-125 */
- unsigned short last_lun; /* (word 126) */
- unsigned short word127; /* (word 127) Feature Set
- * Removable Media Notification
- * 15:2 reserved
- * 1:0 00 = not supported
- * 01 = supported
- * 10 = reserved
- * 11 = reserved
- */
- unsigned short dlf; /* (word 128)
- * device lock function
- * 15:9 reserved
- * 8 security level 1:max 0:high
- * 7:6 reserved
- * 5 enhanced erase
- * 4 expire
- * 3 frozen
- * 2 locked
- * 1 en/disabled
- * 0 capability
- */
- unsigned short csfo; /* (word 129)
- * current set features options
- * 15:4 reserved
- * 3: auto reassign
- * 2: reverting
- * 1: read-look-ahead
- * 0: write cache
- */
- unsigned short words130_155[26];/* reserved vendor words 130-155 */
- unsigned short word156; /* reserved vendor word 156 */
- unsigned short words157_159[3];/* reserved vendor words 157-159 */
- unsigned short cfa_power; /* (word 160) CFA Power Mode
- * 15 word 160 supported
- * 14 reserved
- * 13
- * 12
- * 11:0
- */
- unsigned short words161_175[15];/* Reserved for CFA */
- unsigned short words176_205[30];/* Current Media Serial Number */
- unsigned short words206_254[49];/* reserved words 206-254 */
- unsigned short integrity_word; /* (word 255)
- * 15:8 Checksum
- * 7:0 Signature
- */
-};
-#endif /* __KERNEL__ */
-
-/*
- * IDE "nice" flags. These are used on a per drive basis to determine
- * when to be nice and give more bandwidth to the other devices which
- * share the same IDE bus.
- */
-#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
-#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
-#define IDE_NICE_1 (3) /* when probably won't affect us much */
-#ifndef __KERNEL__
-#define IDE_NICE_0 (2) /* when sure that it won't affect us */
-#define IDE_NICE_2 (4) /* when we know it's on our expense */
-#endif
-
-#endif /* _LINUX_HDREG_H */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 7e1f37d..c076041 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1,12 +1,8 @@
-#ifndef __HID_H
-#define __HID_H
-
/*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,43 +22,9 @@
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#ifndef __HID_H
+#define __HID_H
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID 3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT 1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD 1
-#define USB_INTERFACE_PROTOCOL_MOUSE 2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_GET_IDLE 0x02
-#define HID_REQ_GET_PROTOCOL 0x03
-#define HID_REQ_SET_REPORT 0x09
-#define HID_REQ_SET_IDLE 0x0A
-#define HID_REQ_SET_PROTOCOL 0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID (USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE 4096
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/slab.h>
@@ -73,6 +35,7 @@
#include <linux/input.h>
#include <linux/semaphore.h>
#include <linux/power_supply.h>
+#include <uapi/linux/hid.h>
/*
* We parse each description item into this structure. Short items data
@@ -943,7 +906,4 @@ do { \
#define hid_dbg(hid, fmt, arg...) \
dev_dbg(&(hid)->dev, fmt, ##arg)
-#endif /* __KERNEL__ */
-
#endif
-
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a3f481a..a5dd814 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -1,12 +1,8 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
/*
* Copyright (c) 1999-2000 Vojtech Pavlik
*
* Sponsored by SuSE
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,190 +22,11 @@
* e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
-#include <linux/types.h>
-
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
- unsigned hid;
- signed int value;
-};
-
-struct hiddev_devinfo {
- __u32 bustype;
- __u32 busnum;
- __u32 devnum;
- __u32 ifnum;
- __s16 vendor;
- __s16 product;
- __s16 version;
- __u32 num_applications;
-};
-
-struct hiddev_collection_info {
- __u32 index;
- __u32 type;
- __u32 usage;
- __u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
- __s32 index;
- char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
- __u32 report_type;
- __u32 report_id;
- __u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and
- * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields
- * are unknown. Otherwise use a usage_ref struct filled in from a previous
- * successful GUSAGE call to save time. To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST 0x00000100
-#define HID_REPORT_ID_NEXT 0x00000200
-#define HID_REPORT_ID_MASK 0x000000ff
-#define HID_REPORT_ID_MAX 0x000000ff
-
-#define HID_REPORT_TYPE_INPUT 1
-#define HID_REPORT_TYPE_OUTPUT 2
-#define HID_REPORT_TYPE_FEATURE 3
-#define HID_REPORT_TYPE_MIN 1
-#define HID_REPORT_TYPE_MAX 3
-
-struct hiddev_field_info {
- __u32 report_type;
- __u32 report_id;
- __u32 field_index;
- __u32 maxusage;
- __u32 flags;
- __u32 physical; /* physical usage for this field */
- __u32 logical; /* logical usage for this field */
- __u32 application; /* application usage for this field */
- __s32 logical_minimum;
- __s32 logical_maximum;
- __s32 physical_minimum;
- __s32 physical_maximum;
- __u32 unit_exponent;
- __u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT 0x001
-#define HID_FIELD_VARIABLE 0x002
-#define HID_FIELD_RELATIVE 0x004
-#define HID_FIELD_WRAP 0x008
-#define HID_FIELD_NONLINEAR 0x010
-#define HID_FIELD_NO_PREFERRED 0x020
-#define HID_FIELD_NULL_STATE 0x040
-#define HID_FIELD_VOLATILE 0x080
-#define HID_FIELD_BUFFERED_BYTE 0x100
-
-struct hiddev_usage_ref {
- __u32 report_type;
- __u32 report_id;
- __u32 field_index;
- __u32 usage_index;
- __u32 usage_code;
- __s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
- struct hiddev_usage_ref uref;
- __u32 num_values;
- __s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION 0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION _IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION _IO('H', 0x02)
-#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT _IO('H', 0x05)
-#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG _IOR('H', 0x0E, int)
-#define HIDIOCSFLAG _IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/*
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF 0x1
-#define HIDDEV_FLAG_REPORT 0x2
-#define HIDDEV_FLAGS 0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * for (i = 0; i < rinfo.num_fields; i++) {
- * finfo.report_type = rinfo.report_type;
- * finfo.report_id = rinfo.report_id;
- * finfo.field_index = i;
- * ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * for (j = 0; j < finfo.maxusage; j++) {
- * uref.report_type = rinfo.report_type;
- * uref.report_id = rinfo.report_id;
- * uref.field_index = i;
- * uref.usage_index = j;
- * ioctl(fd, HIDIOCGUCODE, &uref);
- * ioctl(fd, HIDIOCGUSAGE, &uref);
- * }
- * }
- * rinfo.report_id |= HID_REPORT_ID_NEXT;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
+#include <uapi/linux/hiddev.h>
-#ifdef __KERNEL__
/*
* In-kernel definitions.
@@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report
#endif
#endif
-#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 45e9fcb..2451662 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -1,10 +1,6 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
/*
* Copyright (c) 2007 Jiri Kosina
*/
-
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -14,39 +10,11 @@
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
-#include <linux/hid.h>
-#include <linux/types.h>
-
-struct hidraw_report_descriptor {
- __u32 size;
- __u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
- __u32 bustype;
- __s16 vendor;
- __s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int)
-#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
+#include <uapi/linux/hidraw.h>
-/* kernel-only API declarations */
-#ifdef __KERNEL__
struct hidraw {
unsigned int minor;
@@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { }
#endif
#endif
-
-#endif
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 219ca4f..9427ab4 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -1,9 +1,8 @@
#ifndef __HPET__
#define __HPET__ 1
-#include <linux/compiler.h>
+#include <uapi/linux/hpet.h>
-#ifdef __KERNEL__
/*
* Offsets into HPET Registers
@@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
int hpet_alloc(struct hpet_data *);
-#endif /* __KERNEL__ */
-
-struct hpet_info {
- unsigned long hi_ireqfreq; /* Hz */
- unsigned long hi_flags; /* information */
- unsigned short hi_hpet;
- unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */
-
-#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */
-#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */
-#define HPET_INFO _IOR('h', 0x03, struct hpet_info)
-#define HPET_EPI _IO('h', 0x04) /* enable periodic */
-#define HPET_DPI _IO('h', 0x05) /* disable periodic */
-#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */
-
-#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */
-
#endif /* !__HPET__ */
diff --git a/include/linux/hysdn_if.h b/include/linux/hysdn_if.h
deleted file mode 100644
index 00236ae3..0000000
--- a/include/linux/hysdn_if.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * Linux driver for HYSDN cards
- * ioctl definitions shared by hynetmgr and driver.
- *
- * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/****************/
-/* error values */
-/****************/
-#define ERR_NONE 0 /* no error occurred */
-#define ERR_ALREADY_BOOT 1000 /* we are already booting */
-#define EPOF_BAD_MAGIC 1001 /* bad magic in POF header */
-#define ERR_BOARD_DPRAM 1002 /* board DPRAM failed */
-#define EPOF_INTERNAL 1003 /* internal POF handler error */
-#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
-#define ERR_BOOTIMG_FAIL 1005 /* 1. stage boot image did not start */
-#define ERR_BOOTSEQ_FAIL 1006 /* 2. stage boot seq handshake timeout */
-#define ERR_POF_TIMEOUT 1007 /* timeout waiting for card pof ready */
-#define ERR_NOT_BOOTED 1008 /* operation only allowed when booted */
-#define ERR_CONF_LONG 1009 /* conf line is too long */
-#define ERR_INV_CHAN 1010 /* invalid channel number */
-#define ERR_ASYNC_TIME 1011 /* timeout sending async data */
-
-
-
-
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 8a7406b..7972714 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,57 +19,10 @@
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA.
*/
-
#ifndef _LINUX_I2C_DEV_H
#define _LINUX_I2C_DEV_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an
- * unsigned long, except for:
- * - I2C_FUNCS, takes pointer to an unsigned long
- * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES 0x0701 /* number of times a device address should
- be polled when not acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE 0x0703 /* Use this slave address */
-#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it
- is already in use by a driver! */
-#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */
-
-#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */
-#define I2C_SMBUS 0x0720 /* SMBus transfer */
+#include <uapi/linux/i2c-dev.h>
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
- __u8 read_write;
- __u8 command;
- __u32 size;
- union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
- struct i2c_msg __user *msgs; /* pointers to i2c_msgs */
- __u32 nmsgs; /* number of i2c_msgs */
-};
-
-#define I2C_RDRW_IOCTL_MAX_MSGS 42
-
-#ifdef __KERNEL__
#define I2C_MAJOR 89 /* Device major number */
-#endif
-
#endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 94aed0c..800de22 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,18 +23,16 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
Frodo Looijaard <frodol@dds.nl> */
-
#ifndef _LINUX_I2C_H
#define _LINUX_I2C_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
#include <linux/of.h> /* for struct device_node */
#include <linux/swab.h> /* for swab16 */
+#include <uapi/linux/i2c.h>
extern struct bus_type i2c_bus_type;
extern struct device_type i2c_adapter_type;
@@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
i2c_del_driver)
#endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits. When this is a ten
- * bit address, I2C_M_TEN must be set in @flags and the adapter
- * must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters. No other flags may be
- * provided unless the adapter exported the relevant I2C_FUNC_*
- * flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- * I2C slave address. For read transactions where I2C_M_RECV_LEN
- * is set, the caller guarantees that this buffer can hold up to
- * 32 bytes in addition to the initial length byte sent by the
- * slave (plus, if used, the SMBus PEC); and this value will be
- * incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction. It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions. Each transaction begins with a
- * START. That is followed by the slave address, and a bit encoding read
- * versus write. Then follow all the data bytes, possibly including a byte
- * with SMBus PEC. The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed. If this is the last message in a
- * group, it is followed by a STOP. Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
- __u16 addr; /* slave address */
- __u16 flags;
-#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
-#define I2C_M_RD 0x0001 /* read data, from slave to master */
-#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C 0x00000001
-#define I2C_FUNC_10BIT_ADDR 0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */
-#define I2C_FUNC_SMBUS_PEC 0x00000008
-#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
- I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
- I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
- I2C_FUNC_SMBUS_BYTE | \
- I2C_FUNC_SMBUS_BYTE_DATA | \
- I2C_FUNC_SMBUS_WORD_DATA | \
- I2C_FUNC_SMBUS_PROC_CALL | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
- I2C_FUNC_SMBUS_I2C_BLOCK | \
- I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
-union i2c_smbus_data {
- __u8 byte;
- __u16 word;
- __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
- /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ 1
-#define I2C_SMBUS_WRITE 0
-
-/* SMBus transaction types (size parameter in the above functions)
- Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK 0
-#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
-#define I2C_SMBUS_WORD_DATA 3
-#define I2C_SMBUS_PROC_CALL 4
-#define I2C_SMBUS_BLOCK_DATA 5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
-#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA 8
-
#endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
deleted file mode 100644
index a8093bf..0000000
--- a/include/linux/i2o-dev.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * I2O user space accessible structures/APIs
- *
- * (c) Copyright 1999, 2000 Red Hat Software
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *************************************************************************
- *
- * This header file defines the I2O APIs that are available to both
- * the kernel and user level applications. Kernel specific structures
- * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
- * automatically includes this file.
- *
- */
-
-#ifndef _I2O_DEV_H
-#define _I2O_DEV_H
-
-/* How many controllers are we allowing */
-#define MAX_I2O_CONTROLLERS 32
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * I2O Control IOCTLs and structures
- */
-#define I2O_MAGIC_NUMBER 'i'
-#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
-#define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
-#define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
-#define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
-#define I2OPARMGET _IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
-#define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
-#define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
-#define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
-#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32)
-#define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
-#define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
-#define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
-#define I2OPASSTHRU _IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
-#define I2OPASSTHRU32 _IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
-
-struct i2o_cmd_passthru32 {
- unsigned int iop; /* IOP unit number */
- __u32 msg; /* message */
-};
-
-struct i2o_cmd_passthru {
- unsigned int iop; /* IOP unit number */
- void __user *msg; /* message */
-};
-
-struct i2o_cmd_hrtlct {
- unsigned int iop; /* IOP unit number */
- void __user *resbuf; /* Buffer for result */
- unsigned int __user *reslen; /* Buffer length in bytes */
-};
-
-struct i2o_cmd_psetget {
- unsigned int iop; /* IOP unit number */
- unsigned int tid; /* Target device TID */
- void __user *opbuf; /* Operation List buffer */
- unsigned int oplen; /* Operation List buffer length in bytes */
- void __user *resbuf; /* Result List buffer */
- unsigned int __user *reslen; /* Result List buffer length in bytes */
-};
-
-struct i2o_sw_xfer {
- unsigned int iop; /* IOP unit number */
- unsigned char flags; /* Flags field */
- unsigned char sw_type; /* Software type */
- unsigned int sw_id; /* Software ID */
- void __user *buf; /* Pointer to software buffer */
- unsigned int __user *swlen; /* Length of software data */
- unsigned int __user *maxfrag; /* Maximum fragment count */
- unsigned int __user *curfrag; /* Current fragment count */
-};
-
-struct i2o_html {
- unsigned int iop; /* IOP unit number */
- unsigned int tid; /* Target device ID */
- unsigned int page; /* HTML page */
- void __user *resbuf; /* Buffer for reply HTML page */
- unsigned int __user *reslen; /* Length in bytes of reply buffer */
- void __user *qbuf; /* Pointer to HTTP query string */
- unsigned int qlen; /* Length in bytes of query string buffer */
-};
-
-#define I2O_EVT_Q_LEN 32
-
-struct i2o_evt_id {
- unsigned int iop;
- unsigned int tid;
- unsigned int evt_mask;
-};
-
-/* Event data size = frame size - message header + evt indicator */
-#define I2O_EVT_DATA_SIZE 88
-
-struct i2o_evt_info {
- struct i2o_evt_id id;
- unsigned char evt_data[I2O_EVT_DATA_SIZE];
- unsigned int data_size;
-};
-
-struct i2o_evt_get {
- struct i2o_evt_info info;
- int pending;
- int lost;
-};
-
-typedef struct i2o_sg_io_hdr {
- unsigned int flags; /* see I2O_DPT_SG_IO_FLAGS */
-} i2o_sg_io_hdr_t;
-
-/**************************************************************************
- * HRT related constants and structures
- **************************************************************************/
-#define I2O_BUS_LOCAL 0
-#define I2O_BUS_ISA 1
-#define I2O_BUS_EISA 2
-/* was I2O_BUS_MCA 3 */
-#define I2O_BUS_PCI 4
-#define I2O_BUS_PCMCIA 5
-#define I2O_BUS_NUBUS 6
-#define I2O_BUS_CARDBUS 7
-#define I2O_BUS_UNKNOWN 0x80
-
-typedef struct _i2o_pci_bus {
- __u8 PciFunctionNumber;
- __u8 PciDeviceNumber;
- __u8 PciBusNumber;
- __u8 reserved;
- __u16 PciVendorID;
- __u16 PciDeviceID;
-} i2o_pci_bus;
-
-typedef struct _i2o_local_bus {
- __u16 LbBaseIOPort;
- __u16 reserved;
- __u32 LbBaseMemoryAddress;
-} i2o_local_bus;
-
-typedef struct _i2o_isa_bus {
- __u16 IsaBaseIOPort;
- __u8 CSN;
- __u8 reserved;
- __u32 IsaBaseMemoryAddress;
-} i2o_isa_bus;
-
-typedef struct _i2o_eisa_bus_info {
- __u16 EisaBaseIOPort;
- __u8 reserved;
- __u8 EisaSlotNumber;
- __u32 EisaBaseMemoryAddress;
-} i2o_eisa_bus;
-
-typedef struct _i2o_mca_bus {
- __u16 McaBaseIOPort;
- __u8 reserved;
- __u8 McaSlotNumber;
- __u32 McaBaseMemoryAddress;
-} i2o_mca_bus;
-
-typedef struct _i2o_other_bus {
- __u16 BaseIOPort;
- __u16 reserved;
- __u32 BaseMemoryAddress;
-} i2o_other_bus;
-
-typedef struct _i2o_hrt_entry {
- __u32 adapter_id;
- __u32 parent_tid:12;
- __u32 state:4;
- __u32 bus_num:8;
- __u32 bus_type:8;
- union {
- i2o_pci_bus pci_bus;
- i2o_local_bus local_bus;
- i2o_isa_bus isa_bus;
- i2o_eisa_bus eisa_bus;
- i2o_mca_bus mca_bus;
- i2o_other_bus other_bus;
- } bus;
-} i2o_hrt_entry;
-
-typedef struct _i2o_hrt {
- __u16 num_entries;
- __u8 entry_len;
- __u8 hrt_version;
- __u32 change_ind;
- i2o_hrt_entry hrt_entry[1];
-} i2o_hrt;
-
-typedef struct _i2o_lct_entry {
- __u32 entry_size:16;
- __u32 tid:12;
- __u32 reserved:4;
- __u32 change_ind;
- __u32 device_flags;
- __u32 class_id:12;
- __u32 version:4;
- __u32 vendor_id:16;
- __u32 sub_class;
- __u32 user_tid:12;
- __u32 parent_tid:12;
- __u32 bios_info:8;
- __u8 identity_tag[8];
- __u32 event_capabilities;
-} i2o_lct_entry;
-
-typedef struct _i2o_lct {
- __u32 table_size:16;
- __u32 boot_tid:12;
- __u32 lct_ver:4;
- __u32 iop_flags;
- __u32 change_ind;
- i2o_lct_entry lct_entry[1];
-} i2o_lct;
-
-typedef struct _i2o_status_block {
- __u16 org_id;
- __u16 reserved;
- __u16 iop_id:12;
- __u16 reserved1:4;
- __u16 host_unit_id;
- __u16 segment_number:12;
- __u16 i2o_version:4;
- __u8 iop_state;
- __u8 msg_type;
- __u16 inbound_frame_size;
- __u8 init_code;
- __u8 reserved2;
- __u32 max_inbound_frames;
- __u32 cur_inbound_frames;
- __u32 max_outbound_frames;
- char product_id[24];
- __u32 expected_lct_size;
- __u32 iop_capabilities;
- __u32 desired_mem_size;
- __u32 current_mem_size;
- __u32 current_mem_base;
- __u32 desired_io_size;
- __u32 current_io_size;
- __u32 current_io_base;
- __u32 reserved3:24;
- __u32 cmd_status:8;
-} i2o_status_block;
-
-/* Event indicator mask flags */
-#define I2O_EVT_IND_STATE_CHANGE 0x80000000
-#define I2O_EVT_IND_GENERAL_WARNING 0x40000000
-#define I2O_EVT_IND_CONFIGURATION_FLAG 0x20000000
-#define I2O_EVT_IND_LOCK_RELEASE 0x10000000
-#define I2O_EVT_IND_CAPABILITY_CHANGE 0x08000000
-#define I2O_EVT_IND_DEVICE_RESET 0x04000000
-#define I2O_EVT_IND_EVT_MASK_MODIFIED 0x02000000
-#define I2O_EVT_IND_FIELD_MODIFIED 0x01000000
-#define I2O_EVT_IND_VENDOR_EVT 0x00800000
-#define I2O_EVT_IND_DEVICE_STATE 0x00400000
-
-/* Executive event indicitors */
-#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS 0x00000001
-#define I2O_EVT_IND_EXEC_CONNECTION_FAIL 0x00000002
-#define I2O_EVT_IND_EXEC_ADAPTER_FAULT 0x00000004
-#define I2O_EVT_IND_EXEC_POWER_FAIL 0x00000008
-#define I2O_EVT_IND_EXEC_RESET_PENDING 0x00000010
-#define I2O_EVT_IND_EXEC_RESET_IMMINENT 0x00000020
-#define I2O_EVT_IND_EXEC_HW_FAIL 0x00000040
-#define I2O_EVT_IND_EXEC_XCT_CHANGE 0x00000080
-#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY 0x00000100
-#define I2O_EVT_IND_EXEC_MODIFIED_LCT 0x00000200
-#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY 0x00000400
-
-/* Random Block Storage Event Indicators */
-#define I2O_EVT_IND_BSA_VOLUME_LOAD 0x00000001
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD 0x00000002
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ 0x00000004
-#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 0x00000008
-#define I2O_EVT_IND_BSA_SCSI_SMART 0x00000010
-
-/* Event data for generic events */
-#define I2O_EVT_STATE_CHANGE_NORMAL 0x00
-#define I2O_EVT_STATE_CHANGE_SUSPENDED 0x01
-#define I2O_EVT_STATE_CHANGE_RESTART 0x02
-#define I2O_EVT_STATE_CHANGE_NA_RECOVER 0x03
-#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER 0x04
-#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST 0x05
-#define I2O_EVT_STATE_CHANGE_FAILED 0x10
-#define I2O_EVT_STATE_CHANGE_FAULTED 0x11
-
-#define I2O_EVT_GEN_WARNING_NORMAL 0x00
-#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD 0x01
-#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 0x02
-
-#define I2O_EVT_CAPABILITY_OTHER 0x01
-#define I2O_EVT_CAPABILITY_CHANGED 0x02
-
-#define I2O_EVT_SENSOR_STATE_CHANGED 0x01
-
-/*
- * I2O classes / subclasses
- */
-
-/* Class ID and Code Assignments
- * (LCT.ClassID.Version field)
- */
-#define I2O_CLASS_VERSION_10 0x00
-#define I2O_CLASS_VERSION_11 0x01
-
-/* Class code names
- * (from v1.5 Table 6-1 Class Code Assignments.)
- */
-
-#define I2O_CLASS_EXECUTIVE 0x000
-#define I2O_CLASS_DDM 0x001
-#define I2O_CLASS_RANDOM_BLOCK_STORAGE 0x010
-#define I2O_CLASS_SEQUENTIAL_STORAGE 0x011
-#define I2O_CLASS_LAN 0x020
-#define I2O_CLASS_WAN 0x030
-#define I2O_CLASS_FIBRE_CHANNEL_PORT 0x040
-#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL 0x041
-#define I2O_CLASS_SCSI_PERIPHERAL 0x051
-#define I2O_CLASS_ATE_PORT 0x060
-#define I2O_CLASS_ATE_PERIPHERAL 0x061
-#define I2O_CLASS_FLOPPY_CONTROLLER 0x070
-#define I2O_CLASS_FLOPPY_DEVICE 0x071
-#define I2O_CLASS_BUS_ADAPTER 0x080
-#define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090
-#define I2O_CLASS_PEER_TRANSPORT 0x091
-#define I2O_CLASS_END 0xfff
-
-/*
- * Rest of 0x092 - 0x09f reserved for peer-to-peer classes
- */
-
-#define I2O_CLASS_MATCH_ANYCLASS 0xffffffff
-
-/*
- * Subclasses
- */
-
-#define I2O_SUBCLASS_i960 0x001
-#define I2O_SUBCLASS_HDM 0x020
-#define I2O_SUBCLASS_ISM 0x021
-
-/* Operation functions */
-
-#define I2O_PARAMS_FIELD_GET 0x0001
-#define I2O_PARAMS_LIST_GET 0x0002
-#define I2O_PARAMS_MORE_GET 0x0003
-#define I2O_PARAMS_SIZE_GET 0x0004
-#define I2O_PARAMS_TABLE_GET 0x0005
-#define I2O_PARAMS_FIELD_SET 0x0006
-#define I2O_PARAMS_LIST_SET 0x0007
-#define I2O_PARAMS_ROW_ADD 0x0008
-#define I2O_PARAMS_ROW_DELETE 0x0009
-#define I2O_PARAMS_TABLE_CLEAR 0x000A
-
-/*
- * I2O serial number conventions / formats
- * (circa v1.5)
- */
-
-#define I2O_SNFORMAT_UNKNOWN 0
-#define I2O_SNFORMAT_BINARY 1
-#define I2O_SNFORMAT_ASCII 2
-#define I2O_SNFORMAT_UNICODE 3
-#define I2O_SNFORMAT_LAN48_MAC 4
-#define I2O_SNFORMAT_WAN 5
-
-/*
- * Plus new in v2.0 (Yellowstone pdf doc)
- */
-
-#define I2O_SNFORMAT_LAN64_MAC 6
-#define I2O_SNFORMAT_DDM 7
-#define I2O_SNFORMAT_IEEE_REG64 8
-#define I2O_SNFORMAT_IEEE_REG128 9
-#define I2O_SNFORMAT_UNKNOWN2 0xff
-
-/*
- * I2O Get Status State values
- */
-
-#define ADAPTER_STATE_INITIALIZING 0x01
-#define ADAPTER_STATE_RESET 0x02
-#define ADAPTER_STATE_HOLD 0x04
-#define ADAPTER_STATE_READY 0x05
-#define ADAPTER_STATE_OPERATIONAL 0x08
-#define ADAPTER_STATE_FAILED 0x10
-#define ADAPTER_STATE_FAULTED 0x11
-
-/*
- * Software module types
- */
-#define I2O_SOFTWARE_MODULE_IRTOS 0x11
-#define I2O_SOFTWARE_MODULE_IOP_PRIVATE 0x22
-#define I2O_SOFTWARE_MODULE_IOP_CONFIG 0x23
-
-/*
- * Vendors
- */
-#define I2O_VENDOR_DPT 0x001b
-
-/*
- * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
- */
-#define I2O_DPT_SG_FLAG_INTERPRET 0x00010000
-#define I2O_DPT_SG_FLAG_PHYSICAL 0x00020000
-
-#define I2O_DPT_FLASH_FRAG_SIZE 0x10000
-#define I2O_DPT_FLASH_READ 0x0101
-#define I2O_DPT_FLASH_WRITE 0x0102
-
-#endif /* _I2O_DEV_H */
diff --git a/include/linux/i8k.h b/include/linux/i8k.h
deleted file mode 100644
index 1c45ba5..0000000
--- a/include/linux/i8k.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
- *
- * Copyright (C) 2001 Massimo Dal Zotto <dz@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-#ifndef _LINUX_I8K_H
-#define _LINUX_I8K_H
-
-#define I8K_PROC "/proc/i8k"
-#define I8K_PROC_FMT "1.0"
-
-#define I8K_BIOS_VERSION _IOR ('i', 0x80, int) /* broken: meant 4 bytes */
-#define I8K_MACHINE_ID _IOR ('i', 0x81, int) /* broken: meant 16 bytes */
-#define I8K_POWER_STATUS _IOR ('i', 0x82, size_t)
-#define I8K_FN_STATUS _IOR ('i', 0x83, size_t)
-#define I8K_GET_TEMP _IOR ('i', 0x84, size_t)
-#define I8K_GET_SPEED _IOWR('i', 0x85, size_t)
-#define I8K_GET_FAN _IOWR('i', 0x86, size_t)
-#define I8K_SET_FAN _IOWR('i', 0x87, size_t)
-
-#define I8K_FAN_LEFT 1
-#define I8K_FAN_RIGHT 0
-#define I8K_FAN_OFF 0
-#define I8K_FAN_LOW 1
-#define I8K_FAN_HIGH 2
-#define I8K_FAN_MAX I8K_FAN_HIGH
-
-#define I8K_VOL_UP 1
-#define I8K_VOL_DOWN 2
-#define I8K_VOL_MUTE 4
-
-#define I8K_AC 1
-#define I8K_BATTERY 0
-
-#endif
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
index 474f2a5..efc1849 100644
--- a/include/linux/icmp.h
+++ b/include/linux/icmp.h
@@ -17,89 +17,11 @@
#ifndef _LINUX_ICMP_H
#define _LINUX_ICMP_H
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY 0 /* Echo Reply */
-#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */
-#define ICMP_SOURCE_QUENCH 4 /* Source Quench */
-#define ICMP_REDIRECT 5 /* Redirect (change route) */
-#define ICMP_ECHO 8 /* Echo Request */
-#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */
-#define ICMP_PARAMETERPROB 12 /* Parameter Problem */
-#define ICMP_TIMESTAMP 13 /* Timestamp Request */
-#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */
-#define ICMP_INFO_REQUEST 15 /* Information Request */
-#define ICMP_INFO_REPLY 16 /* Information Reply */
-#define ICMP_ADDRESS 17 /* Address Mask Request */
-#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */
-#define NR_ICMP_TYPES 18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH 0 /* Network Unreachable */
-#define ICMP_HOST_UNREACH 1 /* Host Unreachable */
-#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */
-#define ICMP_PORT_UNREACH 3 /* Port Unreachable */
-#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */
-#define ICMP_SR_FAILED 5 /* Source Route failed */
-#define ICMP_NET_UNKNOWN 6
-#define ICMP_HOST_UNKNOWN 7
-#define ICMP_HOST_ISOLATED 8
-#define ICMP_NET_ANO 9
-#define ICMP_HOST_ANO 10
-#define ICMP_NET_UNR_TOS 11
-#define ICMP_HOST_UNR_TOS 12
-#define ICMP_PKT_FILTERED 13 /* Packet filtered */
-#define ICMP_PREC_VIOLATION 14 /* Precedence violation */
-#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */
-#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET 0 /* Redirect Net */
-#define ICMP_REDIR_HOST 1 /* Redirect Host */
-#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */
-#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL 0 /* TTL count exceeded */
-#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */
-
-
-struct icmphdr {
- __u8 type;
- __u8 code;
- __sum16 checksum;
- union {
- struct {
- __be16 id;
- __be16 sequence;
- } echo;
- __be32 gateway;
- struct {
- __be16 __unused;
- __be16 mtu;
- } frag;
- } un;
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/icmp.h>
static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
{
return (struct icmphdr *)skb_transport_header(skb);
}
-#endif
-
-/*
- * constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER 1
-
-struct icmp_filter {
- __u32 data;
-};
-
-
#endif /* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ba45e6b..b4f6c29 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,174 +1,13 @@
#ifndef _LINUX_ICMPV6_H
#define _LINUX_ICMPV6_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
- __u8 icmp6_type;
- __u8 icmp6_code;
- __sum16 icmp6_cksum;
-
-
- union {
- __be32 un_data32[1];
- __be16 un_data16[2];
- __u8 un_data8[4];
-
- struct icmpv6_echo {
- __be16 identifier;
- __be16 sequence;
- } u_echo;
-
- struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u32 reserved:5,
- override:1,
- solicited:1,
- router:1,
- reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u32 router:1,
- solicited:1,
- override:1,
- reserved:29;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } u_nd_advt;
-
- struct icmpv6_nd_ra {
- __u8 hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 reserved:3,
- router_pref:2,
- home_agent:1,
- other:1,
- managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 managed:1,
- other:1,
- home_agent:1,
- router_pref:2,
- reserved:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __be16 rt_lifetime;
- } u_nd_ra;
-
- } icmp6_dataun;
-
-#define icmp6_identifier icmp6_dataun.u_echo.identifier
-#define icmp6_sequence icmp6_dataun.u_echo.sequence
-#define icmp6_pointer icmp6_dataun.un_data32[0]
-#define icmp6_mtu icmp6_dataun.un_data32[0]
-#define icmp6_unused icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay icmp6_dataun.un_data16[0]
-#define icmp6_router icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/icmpv6.h>
static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
{
return (struct icmp6hdr *)skb_transport_header(skb);
}
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW 0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM 0x0
-#define ICMPV6_ROUTER_PREF_HIGH 0x1
-#define ICMPV6_ROUTER_PREF_INVALID 0x2
-
-#define ICMPV6_DEST_UNREACH 1
-#define ICMPV6_PKT_TOOBIG 2
-#define ICMPV6_TIME_EXCEED 3
-#define ICMPV6_PARAMPROB 4
-
-#define ICMPV6_INFOMSG_MASK 0x80
-
-#define ICMPV6_ECHO_REQUEST 128
-#define ICMPV6_ECHO_REPLY 129
-#define ICMPV6_MGM_QUERY 130
-#define ICMPV6_MGM_REPORT 131
-#define ICMPV6_MGM_REDUCTION 132
-
-#define ICMPV6_NI_QUERY 139
-#define ICMPV6_NI_REPLY 140
-
-#define ICMPV6_MLD2_REPORT 143
-
-#define ICMPV6_DHAAD_REQUEST 144
-#define ICMPV6_DHAAD_REPLY 145
-#define ICMPV6_MOBILE_PREFIX_SOL 146
-#define ICMPV6_MOBILE_PREFIX_ADV 147
-
-/*
- * Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE 0
-#define ICMPV6_ADM_PROHIBITED 1
-#define ICMPV6_NOT_NEIGHBOUR 2
-#define ICMPV6_ADDR_UNREACH 3
-#define ICMPV6_PORT_UNREACH 4
-
-/*
- * Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT 0
-#define ICMPV6_EXC_FRAGTIME 1
-
-/*
- * Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD 0
-#define ICMPV6_UNK_NEXTHDR 1
-#define ICMPV6_UNK_OPTION 2
-
-/*
- * constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER 1
-
-/*
- * ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK 1
-#define ICMPV6_FILTER_PASS 2
-#define ICMPV6_FILTER_BLOCKOTHERS 3
-#define ICMPV6_FILTER_PASSONLY 4
-
-struct icmp6_filter {
- __u32 data[8];
-};
-
-/*
- * Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE 1
-#define MLD2_MODE_IS_EXCLUDE 2
-#define MLD2_CHANGE_TO_INCLUDE 3
-#define MLD2_CHANGE_TO_EXCLUDE 4
-#define MLD2_ALLOW_NEW_SOURCES 5
-#define MLD2_BLOCK_OLD_SOURCES 6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
@@ -192,5 +31,3 @@ extern void icmpv6_flow_init(struct sock *sk,
const struct in6_addr *daddr,
int oif);
#endif
-
-#endif
diff --git a/include/linux/if.h b/include/linux/if.h
deleted file mode 100644
index 1ec407b..0000000
--- a/include/linux/if.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Global definitions for the INET interface module.
- *
- * Version: @(#)if.h 1.0.2 04/18/93
- *
- * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- * Ross Biro
- * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_H
-#define _LINUX_IF_H
-
-#include <linux/types.h> /* for "__kernel_caddr_t" et al */
-#include <linux/socket.h> /* for "struct sockaddr" et al */
-#include <linux/compiler.h> /* for "__user" et al */
-
-#define IFNAMSIZ 16
-#define IFALIASZ 256
-#include <linux/hdlc/ioctl.h>
-
-/* Standard interface flags (netdevice->flags). */
-#define IFF_UP 0x1 /* interface is up */
-#define IFF_BROADCAST 0x2 /* broadcast address valid */
-#define IFF_DEBUG 0x4 /* turn on debugging */
-#define IFF_LOOPBACK 0x8 /* is a loopback net */
-#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
-#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
-#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
-#define IFF_NOARP 0x80 /* no ARP protocol */
-#define IFF_PROMISC 0x100 /* receive all packets */
-#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
-
-#define IFF_MASTER 0x400 /* master of a load balancer */
-#define IFF_SLAVE 0x800 /* slave of a load balancer */
-
-#define IFF_MULTICAST 0x1000 /* Supports multicast */
-
-#define IFF_PORTSEL 0x2000 /* can set media type */
-#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
-#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
-
-#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
-#define IFF_DORMANT 0x20000 /* driver signals dormant */
-
-#define IFF_ECHO 0x40000 /* echo sent packets */
-
-#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
- IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
-#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
-#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
-#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
-#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
-#define IFF_BONDING 0x20 /* bonding master or slave */
-#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
-#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
-#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
-#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
-#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
- * release skb->dst
- */
-#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
-#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */
-#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */
-#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */
-#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch
- * datapath port */
-#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing
- * skbs on transmit */
-#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */
-#define IFF_TEAM_PORT 0x40000 /* device used as team port */
-#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */
-#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address
- * change when it's running */
-
-
-#define IF_GET_IFACE 0x0001 /* for querying only */
-#define IF_GET_PROTO 0x0002
-
-/* For definitions see hdlc.h */
-#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
-#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
-#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
-#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
-#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
-#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
-#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
-
-/* For definitions see hdlc.h */
-#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
-#define IF_PROTO_PPP 0x2001 /* PPP protocol */
-#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
-#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
-#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
-#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
-#define IF_PROTO_X25 0x2006 /* X.25 */
-#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
-#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
-#define IF_PROTO_FR_ETH_PVC 0x200B
-#define IF_PROTO_RAW 0x200C /* RAW Socket */
-
-/* RFC 2863 operational status */
-enum {
- IF_OPER_UNKNOWN,
- IF_OPER_NOTPRESENT,
- IF_OPER_DOWN,
- IF_OPER_LOWERLAYERDOWN,
- IF_OPER_TESTING,
- IF_OPER_DORMANT,
- IF_OPER_UP,
-};
-
-/* link modes */
-enum {
- IF_LINK_MODE_DEFAULT,
- IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
-};
-
-/*
- * Device mapping structure. I'd just gone off and designed a
- * beautiful scheme using only loadable modules with arguments
- * for driver options and along come the PCMCIA people 8)
- *
- * Ah well. The get() side of this is good for WDSETUP, and it'll
- * be handy for debugging things. The set side is fine for now and
- * being very small might be worth keeping for clean configuration.
- */
-
-struct ifmap {
- unsigned long mem_start;
- unsigned long mem_end;
- unsigned short base_addr;
- unsigned char irq;
- unsigned char dma;
- unsigned char port;
- /* 3 bytes spare */
-};
-
-struct if_settings {
- unsigned int type; /* Type of physical device or protocol */
- unsigned int size; /* Size of the data allocated by the caller */
- union {
- /* {atm/eth/dsl}_settings anyone ? */
- raw_hdlc_proto __user *raw_hdlc;
- cisco_proto __user *cisco;
- fr_proto __user *fr;
- fr_proto_pvc __user *fr_pvc;
- fr_proto_pvc_info __user *fr_pvc_info;
-
- /* interface settings */
- sync_serial_settings __user *sync;
- te1_settings __user *te1;
- } ifs_ifsu;
-};
-
-/*
- * Interface request structure used for socket
- * ioctl's. All interface ioctl's must have parameter
- * definitions which begin with ifr_name. The
- * remainder may be interface specific.
- */
-
-struct ifreq {
-#define IFHWADDRLEN 6
- union
- {
- char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
- } ifr_ifrn;
-
- union {
- struct sockaddr ifru_addr;
- struct sockaddr ifru_dstaddr;
- struct sockaddr ifru_broadaddr;
- struct sockaddr ifru_netmask;
- struct sockaddr ifru_hwaddr;
- short ifru_flags;
- int ifru_ivalue;
- int ifru_mtu;
- struct ifmap ifru_map;
- char ifru_slave[IFNAMSIZ]; /* Just fits the size */
- char ifru_newname[IFNAMSIZ];
- void __user * ifru_data;
- struct if_settings ifru_settings;
- } ifr_ifru;
-};
-
-#define ifr_name ifr_ifrn.ifrn_name /* interface name */
-#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
-#define ifr_addr ifr_ifru.ifru_addr /* address */
-#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
-#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
-#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
-#define ifr_flags ifr_ifru.ifru_flags /* flags */
-#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
-#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
-#define ifr_map ifr_ifru.ifru_map /* device map */
-#define ifr_slave ifr_ifru.ifru_slave /* slave device */
-#define ifr_data ifr_ifru.ifru_data /* for use by interface */
-#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
-#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
-#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
-#define ifr_newname ifr_ifru.ifru_newname /* New name */
-#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
-
-/*
- * Structure used in SIOCGIFCONF request.
- * Used to retrieve interface configuration
- * for machine (useful for programs which
- * must know all networks accessible).
- */
-
-struct ifconf {
- int ifc_len; /* size of buffer */
- union {
- char __user *ifcu_buf;
- struct ifreq __user *ifcu_req;
- } ifc_ifcu;
-};
-#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
-#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
-
-#endif /* _LINUX_IF_H */
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
deleted file mode 100644
index 23357ab..0000000
--- a/include/linux/if_addr.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef __LINUX_IF_ADDR_H
-#define __LINUX_IF_ADDR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ifaddrmsg {
- __u8 ifa_family;
- __u8 ifa_prefixlen; /* The prefix length */
- __u8 ifa_flags; /* Flags */
- __u8 ifa_scope; /* Address scope */
- __u32 ifa_index; /* Link index */
-};
-
-/*
- * Important comment:
- * IFA_ADDRESS is prefix address, rather than local interface address.
- * It makes no difference for normally configured broadcast interfaces,
- * but for point-to-point IFA_ADDRESS is DESTINATION address,
- * local address is supplied in IFA_LOCAL attribute.
- */
-enum {
- IFA_UNSPEC,
- IFA_ADDRESS,
- IFA_LOCAL,
- IFA_LABEL,
- IFA_BROADCAST,
- IFA_ANYCAST,
- IFA_CACHEINFO,
- IFA_MULTICAST,
- __IFA_MAX,
-};
-
-#define IFA_MAX (__IFA_MAX - 1)
-
-/* ifa_flags */
-#define IFA_F_SECONDARY 0x01
-#define IFA_F_TEMPORARY IFA_F_SECONDARY
-
-#define IFA_F_NODAD 0x02
-#define IFA_F_OPTIMISTIC 0x04
-#define IFA_F_DADFAILED 0x08
-#define IFA_F_HOMEADDRESS 0x10
-#define IFA_F_DEPRECATED 0x20
-#define IFA_F_TENTATIVE 0x40
-#define IFA_F_PERMANENT 0x80
-
-struct ifa_cacheinfo {
- __u32 ifa_prefered;
- __u32 ifa_valid;
- __u32 cstamp; /* created timestamp, hundredths of seconds */
- __u32 tstamp; /* updated timestamp, hundredths of seconds */
-};
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
-#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
-#endif
-
-#endif
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
deleted file mode 100644
index 54580c2..0000000
--- a/include/linux/if_addrlabel.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * if_addrlabel.h - netlink interface for address labels
- *
- * Copyright (C)2007 USAGI/WIDE Project, All Rights Reserved.
- *
- * Authors:
- * YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef __LINUX_IF_ADDRLABEL_H
-#define __LINUX_IF_ADDRLABEL_H
-
-#include <linux/types.h>
-
-struct ifaddrlblmsg {
- __u8 ifal_family; /* Address family */
- __u8 __ifal_reserved; /* Reserved */
- __u8 ifal_prefixlen; /* Prefix length */
- __u8 ifal_flags; /* Flags */
- __u32 ifal_index; /* Link index */
- __u32 ifal_seq; /* sequence number */
-};
-
-enum {
- IFAL_ADDRESS = 1,
- IFAL_LABEL = 2,
- __IFAL_MAX
-};
-
-#define IFAL_MAX (__IFAL_MAX - 1)
-
-#endif
diff --git a/include/linux/if_alg.h b/include/linux/if_alg.h
deleted file mode 100644
index 0f9acce..0000000
--- a/include/linux/if_alg.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * if_alg: User-space algorithm interface
- *
- * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- */
-
-#ifndef _LINUX_IF_ALG_H
-#define _LINUX_IF_ALG_H
-
-#include <linux/types.h>
-
-struct sockaddr_alg {
- __u16 salg_family;
- __u8 salg_type[14];
- __u32 salg_feat;
- __u32 salg_mask;
- __u8 salg_name[64];
-};
-
-struct af_alg_iv {
- __u32 ivlen;
- __u8 iv[0];
-};
-
-/* Socket options */
-#define ALG_SET_KEY 1
-#define ALG_SET_IV 2
-#define ALG_SET_OP 3
-
-/* Operations */
-#define ALG_OP_DECRYPT 0
-#define ALG_OP_ENCRYPT 1
-
-#endif /* _LINUX_IF_ALG_H */
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
deleted file mode 100644
index 46e34bd..0000000
--- a/include/linux/if_arcnet.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Global definitions for the ARCnet interface.
- *
- * Authors: David Woodhouse and Avery Pennarun
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_ARCNET_H
-#define _LINUX_IF_ARCNET_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-
-/*
- * These are the defined ARCnet Protocol ID's.
- */
-
-/* CAP mode */
-/* No macro but uses 1-8 */
-
-/* RFC1201 Protocol ID's */
-#define ARC_P_IP 212 /* 0xD4 */
-#define ARC_P_IPV6 196 /* 0xC4: RFC2497 */
-#define ARC_P_ARP 213 /* 0xD5 */
-#define ARC_P_RARP 214 /* 0xD6 */
-#define ARC_P_IPX 250 /* 0xFA */
-#define ARC_P_NOVELL_EC 236 /* 0xEC */
-
-/* Old RFC1051 Protocol ID's */
-#define ARC_P_IP_RFC1051 240 /* 0xF0 */
-#define ARC_P_ARP_RFC1051 241 /* 0xF1 */
-
-/* MS LanMan/WfWg "NDIS" encapsulation */
-#define ARC_P_ETHER 232 /* 0xE8 */
-
-/* Unsupported/indirectly supported protocols */
-#define ARC_P_DATAPOINT_BOOT 0 /* very old Datapoint equipment */
-#define ARC_P_DATAPOINT_MOUNT 1
-#define ARC_P_POWERLAN_BEACON 8 /* Probably ATA-Netbios related */
-#define ARC_P_POWERLAN_BEACON2 243 /* 0xF3 */
-#define ARC_P_LANSOFT 251 /* 0xFB - what is this? */
-#define ARC_P_ATALK 0xDD
-
-/* Hardware address length */
-#define ARCNET_ALEN 1
-
-/*
- * The RFC1201-specific components of an arcnet packet header.
- */
-struct arc_rfc1201 {
- __u8 proto; /* protocol ID field - varies */
- __u8 split_flag; /* for use with split packets */
- __be16 sequence; /* sequence number */
- __u8 payload[0]; /* space remaining in packet (504 bytes)*/
-};
-#define RFC1201_HDR_SIZE 4
-
-
-/*
- * The RFC1051-specific components.
- */
-struct arc_rfc1051 {
- __u8 proto; /* ARC_P_RFC1051_ARP/RFC1051_IP */
- __u8 payload[0]; /* 507 bytes */
-};
-#define RFC1051_HDR_SIZE 1
-
-
-/*
- * The ethernet-encap-specific components. We have a real ethernet header
- * and some data.
- */
-struct arc_eth_encap {
- __u8 proto; /* Always ARC_P_ETHER */
- struct ethhdr eth; /* standard ethernet header (yuck!) */
- __u8 payload[0]; /* 493 bytes */
-};
-#define ETH_ENCAP_HDR_SIZE 14
-
-
-struct arc_cap {
- __u8 proto;
- __u8 cookie[sizeof(int)]; /* Actually NOT sent over the network */
- union {
- __u8 ack;
- __u8 raw[0]; /* 507 bytes */
- } mes;
-};
-
-/*
- * The data needed by the actual arcnet hardware.
- *
- * Now, in the real arcnet hardware, the third and fourth bytes are the
- * 'offset' specification instead of the length, and the soft data is at
- * the _end_ of the 512-byte buffer. We hide this complexity inside the
- * driver.
- */
-struct arc_hardware {
- __u8 source, /* source ARCnet - filled in automagically */
- dest, /* destination ARCnet - 0 for broadcast */
- offset[2]; /* offset bytes (some weird semantics) */
-};
-#define ARC_HDR_SIZE 4
-
-/*
- * This is an ARCnet frame header, as seen by the kernel (and userspace,
- * when you do a raw packet capture).
- */
-struct archdr {
- /* hardware requirements */
- struct arc_hardware hard;
-
- /* arcnet encapsulation-specific bits */
- union {
- struct arc_rfc1201 rfc1201;
- struct arc_rfc1051 rfc1051;
- struct arc_eth_encap eth_encap;
- struct arc_cap cap;
- __u8 raw[0]; /* 508 bytes */
- } soft;
-};
-
-#endif /* _LINUX_IF_ARCNET_H */
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29..89b4614 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
#ifndef _LINUX_IF_ARP_H
#define _LINUX_IF_ARP_H
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */
-#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */
-#define ARPHRD_EETHER 2 /* Experimental Ethernet */
-#define ARPHRD_AX25 3 /* AX.25 Level 2 */
-#define ARPHRD_PRONET 4 /* PROnet token ring */
-#define ARPHRD_CHAOS 5 /* Chaosnet */
-#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */
-#define ARPHRD_ARCNET 7 /* ARCnet */
-#define ARPHRD_APPLETLK 8 /* APPLEtalk */
-#define ARPHRD_DLCI 15 /* Frame Relay DLCI */
-#define ARPHRD_ATM 19 /* ATM */
-#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */
-#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */
-#define ARPHRD_EUI64 27 /* EUI-64 */
-#define ARPHRD_INFINIBAND 32 /* InfiniBand */
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP 256
-#define ARPHRD_CSLIP 257
-#define ARPHRD_SLIP6 258
-#define ARPHRD_CSLIP6 259
-#define ARPHRD_RSRVD 260 /* Notional KISS type */
-#define ARPHRD_ADAPT 264
-#define ARPHRD_ROSE 270
-#define ARPHRD_X25 271 /* CCITT X.25 */
-#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
-#define ARPHRD_CAN 280 /* Controller Area Network */
-#define ARPHRD_PPP 512
-#define ARPHRD_CISCO 513 /* Cisco HDLC */
-#define ARPHRD_HDLC ARPHRD_CISCO
-#define ARPHRD_LAPB 516 /* LAPB */
-#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
-#define ARPHRD_RAWHDLC 518 /* Raw HDLC */
-
-#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
-#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
-#define ARPHRD_FRAD 770 /* Frame Relay Access Device */
-#define ARPHRD_SKIP 771 /* SKIP vif */
-#define ARPHRD_LOOPBACK 772 /* Loopback device */
-#define ARPHRD_LOCALTLK 773 /* Localtalk device */
-#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */
-#define ARPHRD_BIF 775 /* AP1000 BIF */
-#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */
-#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */
-#define ARPHRD_IPGRE 778 /* GRE over IP */
-#define ARPHRD_PIMREG 779 /* PIMSM register interface */
-#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */
-#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */
-#define ARPHRD_ECONET 782 /* Acorn Econet */
-#define ARPHRD_IRDA 783 /* Linux-IrDA */
-/* ARP works differently on different FC media .. so */
-#define ARPHRD_FCPP 784 /* Point to point fibrechannel */
-#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL 786 /* Fibrechannel public loop */
-#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */
- /* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */
-#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */
-#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
-#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154 804
-#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET 820 /* PhoNet media type */
-#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
-#define ARPHRD_CAIF 822 /* CAIF media type */
-#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */
-
-#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
-#define ARPHRD_NONE 0xFFFE /* zero header length */
-
-/* ARP protocol opcodes. */
-#define ARPOP_REQUEST 1 /* ARP request */
-#define ARPOP_REPLY 2 /* ARP reply */
-#define ARPOP_RREQUEST 3 /* RARP request */
-#define ARPOP_RREPLY 4 /* RARP reply */
-#define ARPOP_InREQUEST 8 /* InARP request */
-#define ARPOP_InREPLY 9 /* InARP reply */
-#define ARPOP_NAK 10 /* (ATM)ARP NAK */
-
-
-/* ARP ioctl request. */
-struct arpreq {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
- char arp_dev[16];
-};
-
-struct arpreq_old {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM 0x02 /* completed entry (ha valid) */
-#define ATF_PERM 0x04 /* permanent entry */
-#define ATF_PUBL 0x08 /* publish entry */
-#define ATF_USETRAILERS 0x10 /* has requested trailers */
-#define ATF_NETMASK 0x20 /* want to use a netmask (only
- for proxy entries) */
-#define ATF_DONTPUB 0x40 /* don't answer this addresses */
-
-/*
- * This structure defines an ethernet arp header.
- */
-
-struct arphdr {
- __be16 ar_hrd; /* format of hardware address */
- __be16 ar_pro; /* format of protocol address */
- unsigned char ar_hln; /* length of hardware address */
- unsigned char ar_pln; /* length of protocol address */
- __be16 ar_op; /* ARP opcode (command) */
-
-#if 0
- /*
- * Ethernet looks like this : This bit is variable sized however...
- */
- unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */
- unsigned char ar_sip[4]; /* sender IP address */
- unsigned char ar_tha[ETH_ALEN]; /* target hardware address */
- unsigned char ar_tip[4]; /* target IP address */
-#endif
-
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
{
@@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev)
/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
}
-#endif
-
#endif /* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
deleted file mode 100644
index a17edda..0000000
--- a/include/linux/if_bonding.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
- *
- *
- * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
- * NCM: Network and Communications Management, Inc.
- *
- * BUT, I'm the one who modified it for ethernet, so:
- * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
- *
- * This software may be used and distributed according to the terms
- * of the GNU Public License, incorporated herein by reference.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
- * - Added support for getting slave's speed and duplex via ethtool.
- * Needed for 802.3ad and other future modes.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Enable support of modes that need to use the unique mac address of
- * each slave.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Amir Noam <amir.noam at intel dot com>
- * - Moved driver's private data types to bonding.h
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- * Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- * - Added ABI version control to restore compatibility between
- * new/old ifenslave and new/old bonding.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
- *
- * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
- * - added definitions for various XOR hashing policies
- */
-
-#ifndef _LINUX_IF_BONDING_H
-#define _LINUX_IF_BONDING_H
-
-#include <linux/if.h>
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* userland - kernel ABI version (2003/05/08) */
-#define BOND_ABI_VERSION 2
-
-/*
- * We can remove these ioctl definitions in 2.5. People should use the
- * SIOC*** versions of them instead
- */
-#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE)
-#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1)
-#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2)
-#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11)
-#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12)
-#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13)
-
-#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY)
-
-#define BOND_MODE_ROUNDROBIN 0
-#define BOND_MODE_ACTIVEBACKUP 1
-#define BOND_MODE_XOR 2
-#define BOND_MODE_BROADCAST 3
-#define BOND_MODE_8023AD 4
-#define BOND_MODE_TLB 5
-#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */
-
-/* each slave's link has 4 states */
-#define BOND_LINK_UP 0 /* link is up and running */
-#define BOND_LINK_FAIL 1 /* link has just gone down */
-#define BOND_LINK_DOWN 2 /* link has been down for too long time */
-#define BOND_LINK_BACK 3 /* link is going back */
-
-/* each slave has several states */
-#define BOND_STATE_ACTIVE 0 /* link is active */
-#define BOND_STATE_BACKUP 1 /* link is backup */
-
-#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */
-
-#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */
-
-#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */
-
-/* hashing types */
-#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */
-#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */
-#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */
-
-typedef struct ifbond {
- __s32 bond_mode;
- __s32 num_slaves;
- __s32 miimon;
-} ifbond;
-
-typedef struct ifslave {
- __s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
- char slave_name[IFNAMSIZ];
- __s8 link;
- __s8 state;
- __u32 link_failure_count;
-} ifslave;
-
-struct ad_info {
- __u16 aggregator_id;
- __u16 ports;
- __u16 actor_key;
- __u16 partner_key;
- __u8 partner_system[ETH_ALEN];
-};
-
-#endif /* _LINUX_IF_BONDING_H */
-
-/*
- * Local variables:
- * version-control: t
- * kept-new-versions: 5
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
-
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index dd3f201..1085ffe 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -9,97 +9,12 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IF_BRIDGE_H
#define _LINUX_IF_BRIDGE_H
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR "bridge"
-#define SYSFS_BRIDGE_FDB "brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR "brport"
-#define SYSFS_BRIDGE_PORT_LINK "bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
- __u64 designated_root;
- __u64 bridge_id;
- __u32 root_path_cost;
- __u32 max_age;
- __u32 hello_time;
- __u32 forward_delay;
- __u32 bridge_max_age;
- __u32 bridge_hello_time;
- __u32 bridge_forward_delay;
- __u8 topology_change;
- __u8 topology_change_detected;
- __u8 root_port;
- __u8 stp_enabled;
- __u32 ageing_time;
- __u32 gc_interval;
- __u32 hello_timer_value;
- __u32 tcn_timer_value;
- __u32 topology_change_timer_value;
- __u32 gc_timer_value;
-};
-
-struct __port_info {
- __u64 designated_root;
- __u64 designated_bridge;
- __u16 port_id;
- __u16 designated_port;
- __u32 path_cost;
- __u32 designated_cost;
- __u8 state;
- __u8 top_change_ack;
- __u8 config_pending;
- __u8 unused0;
- __u32 message_age_timer_value;
- __u32 forward_delay_timer_value;
- __u32 hold_timer_value;
-};
-
-struct __fdb_entry {
- __u8 mac_addr[6];
- __u8 port_no;
- __u8 is_local;
- __u32 ageing_timer_value;
- __u8 port_hi;
- __u8 pad0;
- __u16 unused;
-};
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
+#include <uapi/linux/if_bridge.h>
extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
@@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb);
extern br_should_route_hook_t __rcu *br_should_route_hook;
#endif
-
-#endif
diff --git a/include/linux/if_cablemodem.h b/include/linux/if_cablemodem.h
deleted file mode 100644
index 9ca1007..0000000
--- a/include/linux/if_cablemodem.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_CABLEMODEM_H_
-#define _LINUX_CABLEMODEM_H_
-/*
- * Author: Franco Venturi <fventuri@mediaone.net>
- * Copyright 1998 Franco Venturi
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-/* some useful defines for sb1000.c e cmconfig.c - fv */
-#define SIOCGCMSTATS SIOCDEVPRIVATE+0 /* get cable modem stats */
-#define SIOCGCMFIRMWARE SIOCDEVPRIVATE+1 /* get cm firmware version */
-#define SIOCGCMFREQUENCY SIOCDEVPRIVATE+2 /* get cable modem frequency */
-#define SIOCSCMFREQUENCY SIOCDEVPRIVATE+3 /* set cable modem frequency */
-#define SIOCGCMPIDS SIOCDEVPRIVATE+4 /* get cable modem PIDs */
-#define SIOCSCMPIDS SIOCDEVPRIVATE+5 /* set cable modem PIDs */
-
-#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index 18a5d02..d984694 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -15,28 +15,13 @@
* McLean VA 22101
* Phone: 1-703-847-0040 ext 103
*/
-
#ifndef _LINUX_IF_EQL_H
#define _LINUX_IF_EQL_H
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES 4
-#define EQL_DEFAULT_MTU 576
-#define EQL_DEFAULT_RESCHED_IVAL HZ
-
-#define EQL_ENSLAVE (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
#include <linux/timer.h>
#include <linux/spinlock.h>
+#include <uapi/linux/if_eql.h>
typedef struct slave {
struct list_head list;
@@ -61,23 +46,4 @@ typedef struct equalizer {
struct timer_list timer;
} equalizer_t;
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
- char master_name[16];
- int max_slaves;
- int min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
- char slave_name[16];
- long priority;
-} slave_config_t;
-
-typedef struct slaving_request {
- char slave_name[16];
- long priority;
-} slaving_request_t;
-
-
#endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 167ce5b..12b4d55 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,122 +17,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IF_ETHER_H
#define _LINUX_IF_ETHER_H
-#include <linux/types.h>
-
-/*
- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
- * and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN 6 /* Octets in one ethernet addr */
-#define ETH_HLEN 14 /* Total octets in header. */
-#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN 1500 /* Max. octets in payload */
-#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN 4 /* Octets in the FCS */
-
-/*
- * These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
-#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
-#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
-#define ETH_P_IP 0x0800 /* Internet Protocol packet */
-#define ETH_P_X25 0x0805 /* CCITT X.25 */
-#define ETH_P_ARP 0x0806 /* Address Resolution packet */
-#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
-#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
-#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
-#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
-#define ETH_P_LAT 0x6004 /* DEC LAT */
-#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
-#define ETH_P_CUST 0x6006 /* DEC Customer use */
-#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
-#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
-#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
-#define ETH_P_ATALK 0x809B /* Appletalk DDP */
-#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
-#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
-#define ETH_P_IPX 0x8137 /* IPX over DIX */
-#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
-#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
- * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
-#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
-#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
-#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
-#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
-#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
- * over Ethernet
- */
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
-#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
-#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
-#define ETH_P_TIPC 0x88CA /* TIPC */
-#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
-#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
-#define ETH_P_TDLS 0x890D /* TDLS */
-#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
-#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- * Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
-#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
-#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
-#define ETH_P_802_2 0x0004 /* 802.2 frames */
-#define ETH_P_SNAP 0x0005 /* Internal only */
-#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
-#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
-#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
-#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
-#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
-#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
-#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
-#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
-#define ETH_P_ECONET 0x0018 /* Acorn Econet */
-#define ETH_P_HDLC 0x0019 /* HDLC frames */
-#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
-#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
-#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
-#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
-#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
-#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
-
-/*
- * This is an Ethernet frame header.
- */
-
-struct ethhdr {
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- __be16 h_proto; /* packet type ID field */
-} __attribute__((packed));
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_ether.h>
static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
{
@@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
int mac_pton(const char *s, u8 *mac);
extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
-#endif
-
#endif /* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h
deleted file mode 100644
index 6ed7f1b..0000000
--- a/include/linux/if_fc.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Global definitions for Fibre Channel.
- *
- * Version: @(#)if_fc.h 0.0 11/20/98
- *
- * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- * Donald Becker, <becker@super.org>
- * Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- * Vineet Abraham, <vma@iol.unh.edu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_FC_H
-#define _LINUX_IF_FC_H
-
-#include <linux/types.h>
-
-#define FC_ALEN 6 /* Octets in one ethernet addr */
-#define FC_HLEN (sizeof(struct fch_hdr)+sizeof(struct fcllc))
-#define FC_ID_LEN 3 /* Octets in a Fibre Channel Address */
-
-/* LLC and SNAP constants */
-#define EXTENDED_SAP 0xAA
-#define UI_CMD 0x03
-
-/* This is NOT the Fibre Channel frame header. The FC frame header is
- * constructed in the driver as the Tachyon needs certain fields in
- * certains positions. So, it can't be generalized here.*/
-
-struct fch_hdr {
- __u8 daddr[FC_ALEN]; /* destination address */
- __u8 saddr[FC_ALEN]; /* source address */
-};
-
-/* This is a Fibre Channel LLC structure */
-struct fcllc {
- __u8 dsap; /* destination SAP */
- __u8 ssap; /* source SAP */
- __u8 llc; /* LLC control field */
- __u8 protid[3]; /* protocol id */
- __be16 ethertype; /* ether type field */
-};
-
-#endif /* _LINUX_IF_FC_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index e6dc11e..f5550b3 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -24,84 +24,8 @@
#ifndef _LINUX_IF_FDDI_H
#define _LINUX_IF_FDDI_H
-#include <linux/types.h>
-
-/*
- * Define max and min legal sizes. The frame sizes do not include
- * 4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN 6 /* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID 0x00
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80
-#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0
-#define FDDI_FC_K_SMT_MIN 0x41
-#define FDDI_FC_K_SMT_MAX 0x4F
-#define FDDI_FC_K_MAC_MIN 0xC1
-#define FDDI_FC_K_MAC_MAX 0xCF
-#define FDDI_FC_K_ASYNC_LLC_MIN 0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF 0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN 0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX 0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F
-#define FDDI_FC_K_RESERVED_MIN 0x70
-#define FDDI_FC_K_RESERVED_MAX 0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP 0xAA
-#define FDDI_UI_CMD 0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
- __u8 dsap; /* destination service access point */
- __u8 ssap; /* source service access point */
- __u8 ctrl; /* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
- __u8 dsap; /* destination service access point */
- __u8 ssap; /* source service access point */
- __u8 ctrl_1; /* control byte #1 */
- __u8 ctrl_2; /* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN 3
-struct fddi_snap_hdr {
- __u8 dsap; /* always 0xAA */
- __u8 ssap; /* always 0xAA */
- __u8 ctrl; /* always 0x03 */
- __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */
- __be16 ethertype; /* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
- __u8 fc; /* frame control */
- __u8 daddr[FDDI_K_ALEN]; /* destination address */
- __u8 saddr[FDDI_K_ALEN]; /* source address */
- union
- {
- struct fddi_8022_1_hdr llc_8022_1;
- struct fddi_8022_2_hdr llc_8022_2;
- struct fddi_snap_hdr llc_snap;
- } hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
+#include <uapi/linux/if_fddi.h>
/* Define FDDI statistics structure */
struct fddi_statistics {
@@ -194,6 +118,4 @@ struct fddi_statistics {
__u32 port_ler_flag[2];
__u32 port_hardware_present[2];
};
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 191ee08..4316aa1 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -20,105 +20,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _FRAD_H_
#define _FRAD_H_
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
- char devname[IFNAMSIZ];
- short dlci;
-};
-
-#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3)
-
-/*
- * These are related to the Sangoma SDLA and should remain in order.
- * Code within the SDLA module is based on the specifics of this
- * structure. Change at your own peril.
- */
-struct dlci_conf {
- short flags;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-
-/* these are part of the status read */
- short Tc_fwd;
- short Tc_bwd;
- short Tf_max;
- short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT 0x0001
-#define DLCI_ACCOUNT_CIR_IN 0x0002
-#define DLCI_BUFFER_IF 0x0008
-
-#define DLCI_VALID_FLAGS 0x000B
+#include <uapi/linux/if_frad.h>
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF (SIOCDEVPRIVATE)
-#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA. If changes are
- * necessary to this structure, a routine will need to be
- * added to that module to copy fields.
- */
-struct frad_conf
-{
- short station;
- short flags;
- short kbaud;
- short clocking;
- short mtu;
- short T391;
- short T392;
- short N391;
- short N392;
- short N393;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE 0x0000
-#define FRAD_STATION_NODE 0x0001
-
-#define FRAD_TX_IGNORE_CIR 0x0001
-#define FRAD_RX_ACCOUNT_CIR 0x0002
-#define FRAD_DROP_ABORTED 0x0004
-#define FRAD_BUFFERIF 0x0008
-#define FRAD_STATS 0x0010
-#define FRAD_MCI 0x0100
-#define FRAD_AUTODLCI 0x8000
-#define FRAD_VALID_FLAGS 0x811F
-
-#define FRAD_CLOCK_INT 0x0001
-#define FRAD_CLOCK_EXT 0x0000
-
-#ifdef __KERNEL__
#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
@@ -188,6 +94,4 @@ struct frad_local
extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
deleted file mode 100644
index cdc049f..0000000
--- a/include/linux/if_hippi.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Global definitions for the HIPPI interface.
- *
- * Version: @(#)if_hippi.h 1.0.0 05/26/97
- *
- * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- * Donald Becker, <becker@super.org>
- * Alan Cox, <alan@lxorguk.ukuu.org.uk>
- * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- * Jes Sorensen, <Jes.Sorensen@cern.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_HIPPI_H
-#define _LINUX_IF_HIPPI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- * HIPPI magic constants.
- */
-
-#define HIPPI_ALEN 6 /* Bytes in one HIPPI hw-addr */
-#define HIPPI_HLEN sizeof(struct hippi_hdr)
-#define HIPPI_ZLEN 0 /* Min. bytes in frame without FCS */
-#define HIPPI_DATA_LEN 65280 /* Max. bytes in payload */
-#define HIPPI_FRAME_LEN (HIPPI_DATA_LEN + HIPPI_HLEN)
- /* Max. bytes in frame without FCS */
-
-/*
- * Define LLC and SNAP constants.
- */
-#define HIPPI_EXTENDED_SAP 0xAA
-#define HIPPI_UI_CMD 0x03
-
-
-/*
- * Do we need to list some sort of ID's here?
- */
-
-/*
- * HIPPI statistics collection data.
- */
-
-struct hipnet_statistics {
- int rx_packets; /* total packets received */
- int tx_packets; /* total packets transmitted */
- int rx_errors; /* bad packets received */
- int tx_errors; /* packet transmit problems */
- int rx_dropped; /* no space in linux buffers */
- int tx_dropped; /* no space available in linux */
-
- /* detailed rx_errors: */
- int rx_length_errors;
- int rx_over_errors; /* receiver ring buff overflow */
- int rx_crc_errors; /* recved pkt with crc error */
- int rx_frame_errors; /* recv'd frame alignment error */
- int rx_fifo_errors; /* recv'r fifo overrun */
- int rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
- int tx_aborted_errors;
- int tx_carrier_errors;
- int tx_fifo_errors;
- int tx_heartbeat_errors;
- int tx_window_errors;
-};
-
-
-struct hippi_fp_hdr {
-#if 0
- __u8 ulp; /* must contain 4 */
-#if defined (__BIG_ENDIAN_BITFIELD)
- __u8 d1_data_present:1; /* must be 1 */
- __u8 start_d2_burst_boundary:1; /* must be zero */
- __u8 reserved:6; /* must be zero */
-#if 0
- __u16 reserved1:5;
- __u16 d1_area_size:8; /* must be 3 */
- __u16 d2_offset:3; /* must be zero */
-#endif
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 reserved:6; /* must be zero */
- __u8 start_d2_burst_boundary:1; /* must be zero */
- __u8 d1_data_present:1; /* must be 1 */
-#if 0
- __u16 d2_offset:3; /* must be zero */
- __u16 d1_area_size:8; /* must be 3 */
- __u16 reserved1:5; /* must be zero */
-#endif
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-#else
- __be32 fixed;
-#endif
- __be32 d2_size;
-} __attribute__((packed));
-
-struct hippi_le_hdr {
-#if defined (__BIG_ENDIAN_BITFIELD)
- __u8 fc:3;
- __u8 double_wide:1;
- __u8 message_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 message_type:4;
- __u8 double_wide:1;
- __u8 fc:3;
-#endif
- __u8 dest_switch_addr[3];
-#if defined (__BIG_ENDIAN_BITFIELD)
- __u8 dest_addr_type:4,
- src_addr_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 src_addr_type:4,
- dest_addr_type:4;
-#endif
- __u8 src_switch_addr[3];
- __u16 reserved;
- __u8 daddr[HIPPI_ALEN];
- __u16 locally_administered;
- __u8 saddr[HIPPI_ALEN];
-} __attribute__((packed));
-
-#define HIPPI_OUI_LEN 3
-/*
- * Looks like the dsap and ssap fields have been swapped by mistake in
- * RFC 2067 "IP over HIPPI".
- */
-struct hippi_snap_hdr {
- __u8 dsap; /* always 0xAA */
- __u8 ssap; /* always 0xAA */
- __u8 ctrl; /* always 0x03 */
- __u8 oui[HIPPI_OUI_LEN]; /* organizational universal id (zero)*/
- __be16 ethertype; /* packet type ID field */
-} __attribute__((packed));
-
-struct hippi_hdr {
- struct hippi_fp_hdr fp;
- struct hippi_le_hdr le;
- struct hippi_snap_hdr snap;
-} __attribute__((packed));
-
-#endif /* _LINUX_IF_HIPPI_H */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
deleted file mode 100644
index 7d958475..0000000
--- a/include/linux/if_infiniband.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available at
- * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
- * license, available in the LICENSE.TXT file accompanying this
- * software. These details are also available at
- * <http://www.openfabrics.org/software_license.htm>.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Copyright (c) 2004 Topspin Communications. All rights reserved.
- *
- * $Id$
- */
-
-#ifndef _LINUX_IF_INFINIBAND_H
-#define _LINUX_IF_INFINIBAND_H
-
-#define INFINIBAND_ALEN 20 /* Octets in IPoIB HW addr */
-
-#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 3265f33..c3f817c 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,341 +1,8 @@
#ifndef _LINUX_IF_LINK_H
#define _LINUX_IF_LINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/if_link.h>
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
- __u32 rx_packets; /* total packets received */
- __u32 tx_packets; /* total packets transmitted */
- __u32 rx_bytes; /* total bytes received */
- __u32 tx_bytes; /* total bytes transmitted */
- __u32 rx_errors; /* bad packets received */
- __u32 tx_errors; /* packet transmit problems */
- __u32 rx_dropped; /* no space in linux buffers */
- __u32 tx_dropped; /* no space available in linux */
- __u32 multicast; /* multicast packets received */
- __u32 collisions;
-
- /* detailed rx_errors: */
- __u32 rx_length_errors;
- __u32 rx_over_errors; /* receiver ring buff overflow */
- __u32 rx_crc_errors; /* recved pkt with crc error */
- __u32 rx_frame_errors; /* recv'd frame alignment error */
- __u32 rx_fifo_errors; /* recv'r fifo overrun */
- __u32 rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
- __u32 tx_aborted_errors;
- __u32 tx_carrier_errors;
- __u32 tx_fifo_errors;
- __u32 tx_heartbeat_errors;
- __u32 tx_window_errors;
-
- /* for cslip etc */
- __u32 rx_compressed;
- __u32 tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
- __u64 rx_packets; /* total packets received */
- __u64 tx_packets; /* total packets transmitted */
- __u64 rx_bytes; /* total bytes received */
- __u64 tx_bytes; /* total bytes transmitted */
- __u64 rx_errors; /* bad packets received */
- __u64 tx_errors; /* packet transmit problems */
- __u64 rx_dropped; /* no space in linux buffers */
- __u64 tx_dropped; /* no space available in linux */
- __u64 multicast; /* multicast packets received */
- __u64 collisions;
-
- /* detailed rx_errors: */
- __u64 rx_length_errors;
- __u64 rx_over_errors; /* receiver ring buff overflow */
- __u64 rx_crc_errors; /* recved pkt with crc error */
- __u64 rx_frame_errors; /* recv'd frame alignment error */
- __u64 rx_fifo_errors; /* recv'r fifo overrun */
- __u64 rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
- __u64 tx_aborted_errors;
- __u64 tx_carrier_errors;
- __u64 tx_fifo_errors;
- __u64 tx_heartbeat_errors;
- __u64 tx_window_errors;
-
- /* for cslip etc */
- __u64 rx_compressed;
- __u64 tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
- __u64 mem_start;
- __u64 mem_end;
- __u64 base_addr;
- __u16 irq;
- __u8 dma;
- __u8 port;
-};
-
-/*
- * IFLA_AF_SPEC
- * Contains nested attributes for address family specific attributes.
- * Each address family may create a attribute with the address family
- * number as type and create its own attribute structure in it.
- *
- * Example:
- * [IFLA_AF_SPEC] = {
- * [AF_INET] = {
- * [IFLA_INET_CONF] = ...,
- * },
- * [AF_INET6] = {
- * [IFLA_INET6_FLAGS] = ...,
- * [IFLA_INET6_CONF] = ...,
- * }
- * }
- */
-
-enum {
- IFLA_UNSPEC,
- IFLA_ADDRESS,
- IFLA_BROADCAST,
- IFLA_IFNAME,
- IFLA_MTU,
- IFLA_LINK,
- IFLA_QDISC,
- IFLA_STATS,
- IFLA_COST,
-#define IFLA_COST IFLA_COST
- IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
- IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
- IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
- IFLA_PROTINFO, /* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
- IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
- IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
- IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
- IFLA_OPERSTATE,
- IFLA_LINKMODE,
- IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
- IFLA_NET_NS_PID,
- IFLA_IFALIAS,
- IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
- IFLA_VFINFO_LIST,
- IFLA_STATS64,
- IFLA_VF_PORTS,
- IFLA_PORT_SELF,
- IFLA_AF_SPEC,
- IFLA_GROUP, /* Group the device belongs to */
- IFLA_NET_NS_FD,
- IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
- IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */
-#define IFLA_PROMISCUITY IFLA_PROMISCUITY
- IFLA_NUM_TX_QUEUES,
- IFLA_NUM_RX_QUEUES,
- __IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
- IFLA_INET_UNSPEC,
- IFLA_INET_CONF,
- __IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
- IFF_* flags.
-
- The only change is:
- IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
- more not changeable by user. They describe link media
- characteristics and set by device driver.
-
- Comments:
- - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
- - If neither of these three flags are set;
- the interface is NBMA.
-
- - IFF_MULTICAST does not mean anything special:
- multicasts can be used on all not-NBMA links.
- IFF_MULTICAST means that this media uses special encapsulation
- for multicast frames. Apparently, all IFF_POINTOPOINT and
- IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
- For usual devices it is equal ifi_index.
- If it is a "virtual interface" (f.e. tunnel), ifi_link
- can point to real physical interface (f.e. for bandwidth calculations),
- or maybe 0, what means, that real media is unknown (usual
- for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
- IFLA_INET6_UNSPEC,
- IFLA_INET6_FLAGS, /* link flags */
- IFLA_INET6_CONF, /* sysctl parameters */
- IFLA_INET6_STATS, /* statistics */
- IFLA_INET6_MCAST, /* MC things. What of them? */
- IFLA_INET6_CACHEINFO, /* time values and max reasm size */
- IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
- __IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
- __u32 max_reasm_len;
- __u32 tstamp; /* ipv6InterfaceTable updated timestamp */
- __u32 reachable_time;
- __u32 retrans_time;
-};
-
-enum {
- IFLA_INFO_UNSPEC,
- IFLA_INFO_KIND,
- IFLA_INFO_DATA,
- IFLA_INFO_XSTATS,
- __IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
- IFLA_VLAN_UNSPEC,
- IFLA_VLAN_ID,
- IFLA_VLAN_FLAGS,
- IFLA_VLAN_EGRESS_QOS,
- IFLA_VLAN_INGRESS_QOS,
- __IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
- __u32 flags;
- __u32 mask;
-};
-
-enum {
- IFLA_VLAN_QOS_UNSPEC,
- IFLA_VLAN_QOS_MAPPING,
- __IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
- __u32 from;
- __u32 to;
-};
-
-/* MACVLAN section */
-enum {
- IFLA_MACVLAN_UNSPEC,
- IFLA_MACVLAN_MODE,
- IFLA_MACVLAN_FLAGS,
- __IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
- MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
- MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
- MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
- MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-#define MACVLAN_FLAG_NOPROMISC 1
-
-/* VXLAN section */
-enum {
- IFLA_VXLAN_UNSPEC,
- IFLA_VXLAN_ID,
- IFLA_VXLAN_GROUP,
- IFLA_VXLAN_LINK,
- IFLA_VXLAN_LOCAL,
- IFLA_VXLAN_TTL,
- IFLA_VXLAN_TOS,
- IFLA_VXLAN_LEARNING,
- IFLA_VXLAN_AGEING,
- IFLA_VXLAN_LIMIT,
- IFLA_VXLAN_PORT_RANGE,
- __IFLA_VXLAN_MAX
-};
-#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
-
-struct ifla_vxlan_port_range {
- __be16 low;
- __be16 high;
-};
-
-/* SR-IOV virtual function management section */
-
-enum {
- IFLA_VF_INFO_UNSPEC,
- IFLA_VF_INFO,
- __IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
- IFLA_VF_UNSPEC,
- IFLA_VF_MAC, /* Hardware queue specific attributes */
- IFLA_VF_VLAN,
- IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */
- IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
- __IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
- __u32 vf;
- __u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
- __u32 vf;
- __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
- __u32 qos;
-};
-
-struct ifla_vf_tx_rate {
- __u32 vf;
- __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
- __u32 vf;
- __u32 setting;
-};
-#ifdef __KERNEL__
/* We don't want this structure exposed to user space */
struct ifla_vf_info {
@@ -346,96 +13,4 @@ struct ifla_vf_info {
__u32 tx_rate;
__u32 spoofchk;
};
-#endif
-
-/* VF ports management section
- *
- * Nested layout of set/get msg is:
- *
- * [IFLA_NUM_VF]
- * [IFLA_VF_PORTS]
- * [IFLA_VF_PORT]
- * [IFLA_PORT_*], ...
- * [IFLA_VF_PORT]
- * [IFLA_PORT_*], ...
- * ...
- * [IFLA_PORT_SELF]
- * [IFLA_PORT_*], ...
- */
-
-enum {
- IFLA_VF_PORT_UNSPEC,
- IFLA_VF_PORT, /* nest */
- __IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
- IFLA_PORT_UNSPEC,
- IFLA_PORT_VF, /* __u32 */
- IFLA_PORT_PROFILE, /* string */
- IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */
- IFLA_PORT_INSTANCE_UUID, /* binary UUID */
- IFLA_PORT_HOST_UUID, /* binary UUID */
- IFLA_PORT_REQUEST, /* __u8 */
- IFLA_PORT_RESPONSE, /* __u16, output only */
- __IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX 40
-#define PORT_UUID_MAX 16
-#define PORT_SELF_VF -1
-
-enum {
- PORT_REQUEST_PREASSOCIATE = 0,
- PORT_REQUEST_PREASSOCIATE_RR,
- PORT_REQUEST_ASSOCIATE,
- PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
- PORT_VDP_RESPONSE_SUCCESS = 0,
- PORT_VDP_RESPONSE_INVALID_FORMAT,
- PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
- PORT_VDP_RESPONSE_UNUSED_VTID,
- PORT_VDP_RESPONSE_VTID_VIOLATION,
- PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
- PORT_VDP_RESPONSE_OUT_OF_SYNC,
- /* 0x08-0xFF reserved for future VDP use */
- PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
- PORT_PROFILE_RESPONSE_INPROGRESS,
- PORT_PROFILE_RESPONSE_INVALID,
- PORT_PROFILE_RESPONSE_BADSTATE,
- PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
- PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
- __u8 vsi_mgr_id;
- __u8 vsi_type_id[3];
- __u8 vsi_type_version;
- __u8 pad[3];
-};
-
-
-/* IPoIB section */
-
-enum {
- IFLA_IPOIB_UNSPEC,
- IFLA_IPOIB_PKEY,
- IFLA_IPOIB_MODE,
- IFLA_IPOIB_UMCAST,
- __IFLA_IPOIB_MAX
-};
-
-enum {
- IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */
- IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
-};
-
-#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-
#endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
index 7652576..81e434c 100644
--- a/include/linux/if_ltalk.h
+++ b/include/linux/if_ltalk.h
@@ -1,12 +1,7 @@
#ifndef __LINUX_LTALK_H
#define __LINUX_LTALK_H
-#define LTALK_HLEN 1
-#define LTALK_MTU 600
-#define LTALK_ALEN 1
+#include <uapi/linux/if_ltalk.h>
-#ifdef __KERNEL__
extern struct net_device *alloc_ltalkdev(int sizeof_priv);
#endif
-
-#endif
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
deleted file mode 100644
index f379929..0000000
--- a/include/linux/if_packet.h
+++ /dev/null
@@ -1,272 +0,0 @@
-#ifndef __LINUX_IF_PACKET_H
-#define __LINUX_IF_PACKET_H
-
-#include <linux/types.h>
-
-struct sockaddr_pkt {
- unsigned short spkt_family;
- unsigned char spkt_device[14];
- __be16 spkt_protocol;
-};
-
-struct sockaddr_ll {
- unsigned short sll_family;
- __be16 sll_protocol;
- int sll_ifindex;
- unsigned short sll_hatype;
- unsigned char sll_pkttype;
- unsigned char sll_halen;
- unsigned char sll_addr[8];
-};
-
-/* Packet types */
-
-#define PACKET_HOST 0 /* To us */
-#define PACKET_BROADCAST 1 /* To all */
-#define PACKET_MULTICAST 2 /* To group */
-#define PACKET_OTHERHOST 3 /* To someone else */
-#define PACKET_OUTGOING 4 /* Outgoing of any type */
-/* These ones are invisible by user level */
-#define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */
-#define PACKET_FASTROUTE 6 /* Fastrouted frame */
-
-/* Packet socket options */
-
-#define PACKET_ADD_MEMBERSHIP 1
-#define PACKET_DROP_MEMBERSHIP 2
-#define PACKET_RECV_OUTPUT 3
-/* Value 4 is still used by obsolete turbo-packet. */
-#define PACKET_RX_RING 5
-#define PACKET_STATISTICS 6
-#define PACKET_COPY_THRESH 7
-#define PACKET_AUXDATA 8
-#define PACKET_ORIGDEV 9
-#define PACKET_VERSION 10
-#define PACKET_HDRLEN 11
-#define PACKET_RESERVE 12
-#define PACKET_TX_RING 13
-#define PACKET_LOSS 14
-#define PACKET_VNET_HDR 15
-#define PACKET_TX_TIMESTAMP 16
-#define PACKET_TIMESTAMP 17
-#define PACKET_FANOUT 18
-
-#define PACKET_FANOUT_HASH 0
-#define PACKET_FANOUT_LB 1
-#define PACKET_FANOUT_CPU 2
-#define PACKET_FANOUT_FLAG_DEFRAG 0x8000
-
-struct tpacket_stats {
- unsigned int tp_packets;
- unsigned int tp_drops;
-};
-
-struct tpacket_stats_v3 {
- unsigned int tp_packets;
- unsigned int tp_drops;
- unsigned int tp_freeze_q_cnt;
-};
-
-union tpacket_stats_u {
- struct tpacket_stats stats1;
- struct tpacket_stats_v3 stats3;
-};
-
-struct tpacket_auxdata {
- __u32 tp_status;
- __u32 tp_len;
- __u32 tp_snaplen;
- __u16 tp_mac;
- __u16 tp_net;
- __u16 tp_vlan_tci;
- __u16 tp_padding;
-};
-
-/* Rx ring - header status */
-#define TP_STATUS_KERNEL 0x0
-#define TP_STATUS_USER 0x1
-#define TP_STATUS_COPY 0x2
-#define TP_STATUS_LOSING 0x4
-#define TP_STATUS_CSUMNOTREADY 0x8
-#define TP_STATUS_VLAN_VALID 0x10 /* auxdata has valid tp_vlan_tci */
-#define TP_STATUS_BLK_TMO 0x20
-
-/* Tx ring - header status */
-#define TP_STATUS_AVAILABLE 0x0
-#define TP_STATUS_SEND_REQUEST 0x1
-#define TP_STATUS_SENDING 0x2
-#define TP_STATUS_WRONG_FORMAT 0x4
-
-/* Rx ring - feature request bits */
-#define TP_FT_REQ_FILL_RXHASH 0x1
-
-struct tpacket_hdr {
- unsigned long tp_status;
- unsigned int tp_len;
- unsigned int tp_snaplen;
- unsigned short tp_mac;
- unsigned short tp_net;
- unsigned int tp_sec;
- unsigned int tp_usec;
-};
-
-#define TPACKET_ALIGNMENT 16
-#define TPACKET_ALIGN(x) (((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
-#define TPACKET_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
-
-struct tpacket2_hdr {
- __u32 tp_status;
- __u32 tp_len;
- __u32 tp_snaplen;
- __u16 tp_mac;
- __u16 tp_net;
- __u32 tp_sec;
- __u32 tp_nsec;
- __u16 tp_vlan_tci;
- __u16 tp_padding;
-};
-
-struct tpacket_hdr_variant1 {
- __u32 tp_rxhash;
- __u32 tp_vlan_tci;
-};
-
-struct tpacket3_hdr {
- __u32 tp_next_offset;
- __u32 tp_sec;
- __u32 tp_nsec;
- __u32 tp_snaplen;
- __u32 tp_len;
- __u32 tp_status;
- __u16 tp_mac;
- __u16 tp_net;
- /* pkt_hdr variants */
- union {
- struct tpacket_hdr_variant1 hv1;
- };
-};
-
-struct tpacket_bd_ts {
- unsigned int ts_sec;
- union {
- unsigned int ts_usec;
- unsigned int ts_nsec;
- };
-};
-
-struct tpacket_hdr_v1 {
- __u32 block_status;
- __u32 num_pkts;
- __u32 offset_to_first_pkt;
-
- /* Number of valid bytes (including padding)
- * blk_len <= tp_block_size
- */
- __u32 blk_len;
-
- /*
- * Quite a few uses of sequence number:
- * 1. Make sure cache flush etc worked.
- * Well, one can argue - why not use the increasing ts below?
- * But look at 2. below first.
- * 2. When you pass around blocks to other user space decoders,
- * you can see which blk[s] is[are] outstanding etc.
- * 3. Validate kernel code.
- */
- __aligned_u64 seq_num;
-
- /*
- * ts_last_pkt:
- *
- * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out)
- * ts_last_pkt == 'time-stamp of last packet' and NOT the
- * time when the timer fired and the block was closed.
- * By providing the ts of the last packet we can absolutely
- * guarantee that time-stamp wise, the first packet in the
- * next block will never precede the last packet of the
- * previous block.
- * Case 2. Block has zero packets and TMO'd
- * ts_last_pkt = time when the timer fired and the block
- * was closed.
- * Case 3. Block has 'N' packets and NO TMO.
- * ts_last_pkt = time-stamp of the last pkt in the block.
- *
- * ts_first_pkt:
- * Is always the time-stamp when the block was opened.
- * Case a) ZERO packets
- * No packets to deal with but atleast you know the
- * time-interval of this block.
- * Case b) Non-zero packets
- * Use the ts of the first packet in the block.
- *
- */
- struct tpacket_bd_ts ts_first_pkt, ts_last_pkt;
-};
-
-union tpacket_bd_header_u {
- struct tpacket_hdr_v1 bh1;
-};
-
-struct tpacket_block_desc {
- __u32 version;
- __u32 offset_to_priv;
- union tpacket_bd_header_u hdr;
-};
-
-#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
-#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
-
-enum tpacket_versions {
- TPACKET_V1,
- TPACKET_V2,
- TPACKET_V3
-};
-
-/*
- Frame structure:
-
- - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
- - struct tpacket_hdr
- - pad to TPACKET_ALIGNMENT=16
- - struct sockaddr_ll
- - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
- - Start+tp_mac: [ Optional MAC header ]
- - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
- - Pad to align to TPACKET_ALIGNMENT=16
- */
-
-struct tpacket_req {
- unsigned int tp_block_size; /* Minimal size of contiguous block */
- unsigned int tp_block_nr; /* Number of blocks */
- unsigned int tp_frame_size; /* Size of frame */
- unsigned int tp_frame_nr; /* Total number of frames */
-};
-
-struct tpacket_req3 {
- unsigned int tp_block_size; /* Minimal size of contiguous block */
- unsigned int tp_block_nr; /* Number of blocks */
- unsigned int tp_frame_size; /* Size of frame */
- unsigned int tp_frame_nr; /* Total number of frames */
- unsigned int tp_retire_blk_tov; /* timeout in msecs */
- unsigned int tp_sizeof_priv; /* offset to private data area */
- unsigned int tp_feature_req_word;
-};
-
-union tpacket_req_u {
- struct tpacket_req req;
- struct tpacket_req3 req3;
-};
-
-struct packet_mreq {
- int mr_ifindex;
- unsigned short mr_type;
- unsigned short mr_alen;
- unsigned char mr_address[8];
-};
-
-#define PACKET_MR_MULTICAST 0
-#define PACKET_MR_PROMISC 1
-#define PACKET_MR_ALLMULTI 2
-#define PACKET_MR_UNICAST 3
-
-#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
index d70034b..bbcdb0a 100644
--- a/include/linux/if_phonet.h
+++ b/include/linux/if_phonet.h
@@ -8,12 +8,7 @@
#ifndef LINUX_IF_PHONET_H
#define LINUX_IF_PHONET_H
-#define PHONET_MIN_MTU 6 /* pn_length = 0 */
-#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */
-#define PHONET_DEV_MTU PHONET_MAX_MTU
+#include <uapi/linux/if_phonet.h>
-#ifdef __KERNEL__
extern struct header_ops phonet_header_ops;
#endif
-
-#endif
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
deleted file mode 100644
index 6298c7e..0000000
--- a/include/linux/if_plip.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * NET3 PLIP tuning facilities for the new Niibe PLIP.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#ifndef _LINUX_IF_PLIP_H
-#define _LINUX_IF_PLIP_H
-
-#include <linux/sockios.h>
-
-#define SIOCDEVPLIP SIOCDEVPRIVATE
-
-struct plipconf {
- unsigned short pcmd;
- unsigned long nibble;
- unsigned long trigger;
-};
-
-#define PLIP_GET_TIMEOUT 0x1
-#define PLIP_SET_TIMEOUT 0x2
-
-#endif
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
deleted file mode 100644
index 9048fab..0000000
--- a/include/linux/if_ppp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/ppp-ioctl.h>
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index b477541..0fb71e5 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -11,98 +11,11 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef __LINUX_IF_PPPOL2TP_H
#define __LINUX_IF_PPPOL2TP_H
-#include <linux/types.h>
-
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/in6.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv4.
- */
-struct pppol2tp_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP socket to use */
-
- struct sockaddr_in addr; /* IP address and port to send to */
-
- __u16 s_tunnel, s_session; /* For matching incoming packets */
- __u16 d_tunnel, d_session; /* For sending outgoing packets */
-};
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv6.
- */
-struct pppol2tpin6_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP socket to use */
-
- __u16 s_tunnel, s_session; /* For matching incoming packets */
- __u16 d_tunnel, d_session; /* For sending outgoing packets */
-
- struct sockaddr_in6 addr; /* IP address and port to send to */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP or IP socket to use */
-
- struct sockaddr_in addr; /* IP address and port to send to */
-
- __u32 s_tunnel, s_session; /* For matching incoming packets */
- __u32 d_tunnel, d_session; /* For sending outgoing packets */
-};
-
-struct pppol2tpv3in6_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP or IP socket to use */
-
- __u32 s_tunnel, s_session; /* For matching incoming packets */
- __u32 d_tunnel, d_session; /* For sending outgoing packets */
-
- struct sockaddr_in6 addr; /* IP address and port to send to */
-};
-
-/* Socket options:
- * DEBUG - bitmask of debug message categories
- * SENDSEQ - 0 => don't send packets with sequence numbers
- * 1 => send packets with sequence numbers
- * RECVSEQ - 0 => receive packet sequence numbers are optional
- * 1 => drop receive packets without sequence numbers
- * LNSMODE - 0 => act as LAC.
- * 1 => act as LNS.
- * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
- PPPOL2TP_SO_DEBUG = 1,
- PPPOL2TP_SO_RECVSEQ = 2,
- PPPOL2TP_SO_SENDSEQ = 3,
- PPPOL2TP_SO_LNSMODE = 4,
- PPPOL2TP_SO_REORDERTO = 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
- PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if
- * compiled in) */
- PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel
- * interface */
- PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */
- PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */
-};
-
-
+#include <uapi/linux/if_pppol2tp.h>
#endif
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 09c474c..aff7ad8 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -12,153 +12,14 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef __LINUX_IF_PPPOX_H
#define __LINUX_IF_PPPOX_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef __KERNEL__
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX 24
-#define PF_PPPOX AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************
- * PPPoE addressing definition
- */
-typedef __be16 sid_t;
-struct pppoe_addr {
- sid_t sid; /* Session identifier */
- unsigned char remote[ETH_ALEN]; /* Remote address */
- char dev[IFNAMSIZ]; /* Local device to use */
-};
-
-/************************************************************************
- * PPTP addressing definition
- */
-struct pptp_addr {
- __be16 call_id;
- struct in_addr sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE 0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP 2
-#define PX_MAX_PROTO 3
-
-struct sockaddr_pppox {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- union {
- struct pppoe_addr pppoe;
- struct pptp_addr pptp;
- } sa_addr;
-} __packed;
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tp_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpin6 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpin6_addr pppol2tp;
-} __packed;
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpv3_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpv3in6 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpv3in6_addr pppol2tp;
-} __packed;
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD _IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE 0x09
-#define PADO_CODE 0x07
-#define PADR_CODE 0x19
-#define PADS_CODE 0x65
-#define PADT_CODE 0xa7
-struct pppoe_tag {
- __be16 tag_type;
- __be16 tag_len;
- char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL __cpu_to_be16(0x0000)
-#define PTT_SRV_NAME __cpu_to_be16(0x0101)
-#define PTT_AC_NAME __cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ __cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE __cpu_to_be16(0x0104)
-#define PTT_VENDOR __cpu_to_be16(0x0105)
-#define PTT_RELAY_SID __cpu_to_be16(0x0110)
-#define PTT_SRV_ERR __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR __cpu_to_be16(0x0202)
-#define PTT_GEN_ERR __cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 ver : 4;
- __u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 type : 4;
- __u8 ver : 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 code;
- __be16 sid;
- __be16 length;
- struct pppoe_tag tag[0];
-} __packed;
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN 8
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_pppox.h>
static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
{
@@ -232,6 +93,4 @@ enum {
PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/
};
-#endif /* __KERNEL__ */
-
#endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_slip.h b/include/linux/if_slip.h
deleted file mode 100644
index 1eb4e3a..0000000
--- a/include/linux/if_slip.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Swansea University Computer Society NET3
- *
- * This file declares the constants of special use with the SLIP/CSLIP/
- * KISS TNC driver.
- */
-
-#ifndef __LINUX_SLIP_H
-#define __LINUX_SLIP_H
-
-#define SL_MODE_SLIP 0
-#define SL_MODE_CSLIP 1
-#define SL_MODE_KISS 4
-
-#define SL_OPT_SIXBIT 2
-#define SL_OPT_ADAPTIVE 8
-
-/*
- * VSV = ioctl for keepalive & outfill in SLIP driver
- */
-
-#define SIOCSKEEPALIVE (SIOCDEVPRIVATE) /* Set keepalive timeout in sec */
-#define SIOCGKEEPALIVE (SIOCDEVPRIVATE+1) /* Get keepalive timeout */
-#define SIOCSOUTFILL (SIOCDEVPRIVATE+2) /* Set outfill timeout */
-#define SIOCGOUTFILL (SIOCDEVPRIVATE+3) /* Get outfill timeout */
-#define SIOCSLEASE (SIOCDEVPRIVATE+4) /* Set "leased" line type */
-#define SIOCGLEASE (SIOCDEVPRIVATE+5) /* Get line type */
-
-
-#endif
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index 6d88a7f..0245def 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -7,14 +7,13 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
#ifndef _LINUX_IF_TEAM_H_
#define _LINUX_IF_TEAM_H_
-#ifdef __KERNEL__
#include <linux/netpoll.h>
#include <net/sch_generic.h>
+#include <uapi/linux/if_team.h>
struct team_pcpu_stats {
u64 rx_packets;
@@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode);
#define TEAM_DEFAULT_NUM_TX_QUEUES 16
#define TEAM_DEFAULT_NUM_RX_QUEUES 16
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
- TEAM_CMD_NOOP,
- TEAM_CMD_OPTIONS_SET,
- TEAM_CMD_OPTIONS_GET,
- TEAM_CMD_PORT_LIST_GET,
-
- __TEAM_CMD_MAX,
- TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
- TEAM_ATTR_UNSPEC,
- TEAM_ATTR_TEAM_IFINDEX, /* u32 */
- TEAM_ATTR_LIST_OPTION, /* nest */
- TEAM_ATTR_LIST_PORT, /* nest */
-
- __TEAM_ATTR_MAX,
- TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- * [TEAM_ATTR_LIST_OPTION]
- * [TEAM_ATTR_ITEM_OPTION]
- * [TEAM_ATTR_OPTION_*], ...
- * [TEAM_ATTR_ITEM_OPTION]
- * [TEAM_ATTR_OPTION_*], ...
- * ...
- * [TEAM_ATTR_LIST_PORT]
- * [TEAM_ATTR_ITEM_PORT]
- * [TEAM_ATTR_PORT_*], ...
- * [TEAM_ATTR_ITEM_PORT]
- * [TEAM_ATTR_PORT_*], ...
- * ...
- */
-
-enum {
- TEAM_ATTR_ITEM_OPTION_UNSPEC,
- TEAM_ATTR_ITEM_OPTION, /* nest */
-
- __TEAM_ATTR_ITEM_OPTION_MAX,
- TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_OPTION_UNSPEC,
- TEAM_ATTR_OPTION_NAME, /* string */
- TEAM_ATTR_OPTION_CHANGED, /* flag */
- TEAM_ATTR_OPTION_TYPE, /* u8 */
- TEAM_ATTR_OPTION_DATA, /* dynamic */
- TEAM_ATTR_OPTION_REMOVED, /* flag */
- TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */
- TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */
-
- __TEAM_ATTR_OPTION_MAX,
- TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_ITEM_PORT_UNSPEC,
- TEAM_ATTR_ITEM_PORT, /* nest */
-
- __TEAM_ATTR_ITEM_PORT_MAX,
- TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_PORT_UNSPEC,
- TEAM_ATTR_PORT_IFINDEX, /* u32 */
- TEAM_ATTR_PORT_CHANGED, /* flag */
- TEAM_ATTR_PORT_LINKUP, /* flag */
- TEAM_ATTR_PORT_SPEED, /* u32 */
- TEAM_ATTR_PORT_DUPLEX, /* u8 */
- TEAM_ATTR_PORT_REMOVED, /* flag */
-
- __TEAM_ATTR_PORT_MAX,
- TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
#endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 06b1829..ed6da2e 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -12,86 +12,11 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
#ifndef __IF_TUN_H
#define __IF_TUN_H
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
-
-/* Read queue size */
-#define TUN_READQ_SIZE 500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 0x0001
-#define TUN_TAP_DEV 0x0002
-#define TUN_TYPE_MASK 0x000f
-
-#define TUN_FASYNC 0x0010
-#define TUN_NOCHECKSUM 0x0020
-#define TUN_NO_PI 0x0040
-#define TUN_ONE_QUEUE 0x0080
-#define TUN_PERSIST 0x0100
-#define TUN_VNET_HDR 0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM _IOW('T', 200, int)
-#define TUNSETDEBUG _IOW('T', 201, int)
-#define TUNSETIFF _IOW('T', 202, int)
-#define TUNSETPERSIST _IOW('T', 203, int)
-#define TUNSETOWNER _IOW('T', 204, int)
-#define TUNSETLINK _IOW('T', 205, int)
-#define TUNSETGROUP _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF _IOR('T', 211, int)
-#define TUNSETSNDBUF _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN 0x0001
-#define IFF_TAP 0x0002
-#define IFF_NO_PI 0x1000
-#define IFF_ONE_QUEUE 0x2000
-#define IFF_VNET_HDR 0x4000
-#define IFF_TUN_EXCL 0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */
-#define TUN_F_UFO 0x10 /* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP 0x0001
-struct tun_pi {
- __u16 flags;
- __be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
- __u16 flags; /* TUN_FLT_ flags see above */
- __u16 count; /* Number of addresses */
- __u8 addr[0][ETH_ALEN];
-};
+#include <uapi/linux/if_tun.h>
-#ifdef __KERNEL__
#if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
struct socket *tun_get_socket(struct file *);
#else
@@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f)
return ERR_PTR(-EINVAL);
}
#endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
#endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 8c5035ac..1cc595a 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -1,100 +1,8 @@
#ifndef _IF_TUNNEL_H_
#define _IF_TUNNEL_H_
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
#include <linux/ip.h>
#include <linux/in6.h>
-#endif
-
-#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM __cpu_to_be16(0x8000)
-#define GRE_ROUTING __cpu_to_be16(0x4000)
-#define GRE_KEY __cpu_to_be16(0x2000)
-#define GRE_SEQ __cpu_to_be16(0x1000)
-#define GRE_STRICT __cpu_to_be16(0x0800)
-#define GRE_REC __cpu_to_be16(0x0700)
-#define GRE_FLAGS __cpu_to_be16(0x00F8)
-#define GRE_VERSION __cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
- char name[IFNAMSIZ];
- int link;
- __be16 i_flags;
- __be16 o_flags;
- __be32 i_key;
- __be32 o_key;
- struct iphdr iph;
-};
-
-/* SIT-mode i_flags */
-#define SIT_ISATAP 0x0001
-
-struct ip_tunnel_prl {
- __be32 addr;
- __u16 flags;
- __u16 __reserved;
- __u32 datalen;
- __u32 __reserved2;
- /* data follows */
-};
-
-/* PRL flags */
-#define PRL_DEFAULT 0x0001
-
-struct ip_tunnel_6rd {
- struct in6_addr prefix;
- __be32 relay_prefix;
- __u16 prefixlen;
- __u16 relay_prefixlen;
-};
-
-enum {
- IFLA_GRE_UNSPEC,
- IFLA_GRE_LINK,
- IFLA_GRE_IFLAGS,
- IFLA_GRE_OFLAGS,
- IFLA_GRE_IKEY,
- IFLA_GRE_OKEY,
- IFLA_GRE_LOCAL,
- IFLA_GRE_REMOTE,
- IFLA_GRE_TTL,
- IFLA_GRE_TOS,
- IFLA_GRE_PMTUDISC,
- IFLA_GRE_ENCAP_LIMIT,
- IFLA_GRE_FLOWINFO,
- IFLA_GRE_FLAGS,
- __IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1)
-
-/* VTI-mode i_flags */
-#define VTI_ISVTI 0x0001
-
-enum {
- IFLA_VTI_UNSPEC,
- IFLA_VTI_LINK,
- IFLA_VTI_IKEY,
- IFLA_VTI_OKEY,
- IFLA_VTI_LOCAL,
- IFLA_VTI_REMOTE,
- __IFLA_VTI_MAX,
-};
+#include <uapi/linux/if_tunnel.h>
-#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1)
#endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c0ff748..d06cc5c 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -9,15 +9,14 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef _LINUX_IF_VLAN_H_
#define _LINUX_IF_VLAN_H_
-#ifdef __KERNEL__
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/bug.h>
+#include <uapi/linux/if_vlan.h>
#define VLAN_HLEN 4 /* The additional bytes required by VLAN
* (in addition to the Ethernet header)
@@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
*/
skb->protocol = htons(ETH_P_802_2);
}
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
- ADD_VLAN_CMD,
- DEL_VLAN_CMD,
- SET_VLAN_INGRESS_PRIORITY_CMD,
- SET_VLAN_EGRESS_PRIORITY_CMD,
- GET_VLAN_INGRESS_PRIORITY_CMD,
- GET_VLAN_EGRESS_PRIORITY_CMD,
- SET_VLAN_NAME_TYPE_CMD,
- SET_VLAN_FLAG_CMD,
- GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
- GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
- VLAN_FLAG_REORDER_HDR = 0x1,
- VLAN_FLAG_GVRP = 0x2,
- VLAN_FLAG_LOOSE_BINDING = 0x4,
-};
-
-enum vlan_name_types {
- VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */
- VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */
- VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */
- VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */
- VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
- int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
- char device1[24];
-
- union {
- char device2[24];
- int VID;
- unsigned int skb_priority;
- unsigned int name_type;
- unsigned int bind_type;
- unsigned int flag; /* Matches vlan_dev_priv flags */
- } u;
-
- short vlan_qos;
-};
-
#endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/if_x25.h b/include/linux/if_x25.h
deleted file mode 100644
index 897765f..0000000
--- a/include/linux/if_x25.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Linux X.25 packet to device interface
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _IF_X25_H
-#define _IF_X25_H
-
-#include <linux/types.h>
-
-/* Documentation/networking/x25-iface.txt */
-#define X25_IFACE_DATA 0x00
-#define X25_IFACE_CONNECT 0x01
-#define X25_IFACE_DISCONNECT 0x02
-#define X25_IFACE_PARAMS 0x03
-
-#endif /* _IF_X25_H */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 82de336..7f2bf15 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -12,123 +12,13 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IGMP_H
#define _LINUX_IGMP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- * IGMP protocol structures
- */
-
-/*
- * Header in on cable format
- */
-
-struct igmphdr {
- __u8 type;
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE 1
-#define IGMPV3_MODE_IS_EXCLUDE 2
-#define IGMPV3_CHANGE_TO_INCLUDE 3
-#define IGMPV3_CHANGE_TO_EXCLUDE 4
-#define IGMPV3_ALLOW_NEW_SOURCES 5
-#define IGMPV3_BLOCK_OLD_SOURCES 6
-
-struct igmpv3_grec {
- __u8 grec_type;
- __u8 grec_auxwords;
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
-};
-
-struct igmpv3_report {
- __u8 type;
- __u8 resv1;
- __be16 csum;
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
- __u8 type;
- __u8 code;
- __be16 csum;
- __be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 qrv:3,
- suppress:1,
- resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 resv:4,
- suppress:1,
- qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
-#define IGMP_DVMRP 0x13 /* DVMRP routing */
-#define IGMP_PIM 0x14 /* PIM routing */
-#define IGMP_TRACE 0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP 0x1e
-#define IGMP_MTRACE 0x1f
-
-
-/*
- * Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER 0x01
-#define IGMP_IDLE_MEMBER 0x02
-#define IGMP_LAZY_MEMBER 0x03
-#define IGMP_SLEEPING_MEMBER 0x04
-#define IGMP_AWAKENING_MEMBER 0x05
-
-#define IGMP_MINLEN 8
-
-#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */
- /* query (in seconds) */
-
-#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */
- /* specifies time in 10th of seconds */
-
-#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */
- /* message in this period of time, */
- /* revert to IGMP v2 router. */
-
-#define IGMP_ALL_HOSTS htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
#include <linux/timer.h>
#include <linux/in.h>
+#include <uapi/linux/igmp.h>
static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
{
@@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
extern void ip_mc_rejoin_groups(struct in_device *in_dev);
#endif
-#endif
diff --git a/include/linux/in.h b/include/linux/in.h
index e0337f1..31b4937 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -18,240 +18,9 @@
#ifndef _LINUX_IN_H
#define _LINUX_IN_H
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols. */
-enum {
- IPPROTO_IP = 0, /* Dummy protocol for TCP */
- IPPROTO_ICMP = 1, /* Internet Control Message Protocol */
- IPPROTO_IGMP = 2, /* Internet Group Management Protocol */
- IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */
- IPPROTO_TCP = 6, /* Transmission Control Protocol */
- IPPROTO_EGP = 8, /* Exterior Gateway Protocol */
- IPPROTO_PUP = 12, /* PUP protocol */
- IPPROTO_UDP = 17, /* User Datagram Protocol */
- IPPROTO_IDP = 22, /* XNS IDP protocol */
- IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */
- IPPROTO_RSVP = 46, /* RSVP protocol */
- IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */
-
- IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
-
- IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */
- IPPROTO_AH = 51, /* Authentication Header protocol */
- IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */
- IPPROTO_PIM = 103, /* Protocol Independent Multicast */
-
- IPPROTO_COMP = 108, /* Compression Header protocol */
- IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */
- IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */
-
- IPPROTO_RAW = 255, /* Raw IP packets */
- IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
- __be32 s_addr;
-};
-
-#define IP_TOS 1
-#define IP_TTL 2
-#define IP_HDRINCL 3
-#define IP_OPTIONS 4
-#define IP_ROUTER_ALERT 5
-#define IP_RECVOPTS 6
-#define IP_RETOPTS 7
-#define IP_PKTINFO 8
-#define IP_PKTOPTIONS 9
-#define IP_MTU_DISCOVER 10
-#define IP_RECVERR 11
-#define IP_RECVTTL 12
-#define IP_RECVTOS 13
-#define IP_MTU 14
-#define IP_FREEBIND 15
-#define IP_IPSEC_POLICY 16
-#define IP_XFRM_POLICY 17
-#define IP_PASSSEC 18
-#define IP_TRANSPARENT 19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR 20
-#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR
-
-#define IP_MINTTL 21
-#define IP_NODEFRAG 22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT 0 /* Never send DF frames */
-#define IP_PMTUDISC_WANT 1 /* Use per route hints */
-#define IP_PMTUDISC_DO 2 /* Always DF */
-#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */
-
-#define IP_MULTICAST_IF 32
-#define IP_MULTICAST_TTL 33
-#define IP_MULTICAST_LOOP 34
-#define IP_ADD_MEMBERSHIP 35
-#define IP_DROP_MEMBERSHIP 36
-#define IP_UNBLOCK_SOURCE 37
-#define IP_BLOCK_SOURCE 38
-#define IP_ADD_SOURCE_MEMBERSHIP 39
-#define IP_DROP_SOURCE_MEMBERSHIP 40
-#define IP_MSFILTER 41
-#define MCAST_JOIN_GROUP 42
-#define MCAST_BLOCK_SOURCE 43
-#define MCAST_UNBLOCK_SOURCE 44
-#define MCAST_LEAVE_GROUP 45
-#define MCAST_JOIN_SOURCE_GROUP 46
-#define MCAST_LEAVE_SOURCE_GROUP 47
-#define MCAST_MSFILTER 48
-#define IP_MULTICAST_ALL 49
-#define IP_UNICAST_IF 50
-
-#define MCAST_EXCLUDE 0
-#define MCAST_INCLUDE 1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL 1
-#define IP_DEFAULT_MULTICAST_LOOP 1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_interface; /* local IP address of interface */
-};
-
-struct ip_mreqn {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_address; /* local IP address of interface */
- int imr_ifindex; /* Interface index */
-};
-
-struct ip_mreq_source {
- __be32 imr_multiaddr;
- __be32 imr_interface;
- __be32 imr_sourceaddr;
-};
-
-struct ip_msfilter {
- __be32 imsf_multiaddr;
- __be32 imsf_interface;
- __u32 imsf_fmode;
- __u32 imsf_numsrc;
- __be32 imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
- (sizeof(struct ip_msfilter) - sizeof(__u32) \
- + (numsrc) * sizeof(__u32))
-
-struct group_req {
- __u32 gr_interface; /* interface index */
- struct __kernel_sockaddr_storage gr_group; /* group address */
-};
-
-struct group_source_req {
- __u32 gsr_interface; /* interface index */
- struct __kernel_sockaddr_storage gsr_group; /* group address */
- struct __kernel_sockaddr_storage gsr_source; /* source address */
-};
-
-struct group_filter {
- __u32 gf_interface; /* interface index */
- struct __kernel_sockaddr_storage gf_group; /* multicast address */
- __u32 gf_fmode; /* filter mode */
- __u32 gf_numsrc; /* number of sources */
- struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
- (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
- + (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
- int ipi_ifindex;
- struct in_addr ipi_spec_dst;
- struct in_addr ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
-struct sockaddr_in {
- __kernel_sa_family_t sin_family; /* Address family */
- __be16 sin_port; /* Port number */
- struct in_addr sin_addr; /* Internet address */
-
- /* Pad to size of `struct sockaddr'. */
- unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) -
- sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero __pad /* for BSD UNIX comp. -FvK */
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0)
-#define IN_CLASSA_NET 0xff000000
-#define IN_CLASSA_NSHIFT 24
-#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET)
-#define IN_CLASSA_MAX 128
-
-#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define IN_CLASSB_NET 0xffff0000
-#define IN_CLASSB_NSHIFT 16
-#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET)
-#define IN_CLASSB_MAX 65536
-
-#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define IN_CLASSC_NET 0xffffff00
-#define IN_CLASSC_NSHIFT 8
-#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET)
-
-#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define IN_MULTICAST(a) IN_CLASSD(a)
-#define IN_MULTICAST_NET 0xF0000000
-
-#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define IN_BADCLASS(a) IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define INADDR_ANY ((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define INADDR_BROADCAST ((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define INADDR_NONE ((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define IN_LOOPBACKNET 127
-
-/* Address to loopback in software to local host. */
-#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */
-#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */
-#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */
-#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
#include <linux/errno.h>
+#include <uapi/linux/in.h>
static inline int proto_ports_offset(int proto)
{
@@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr)
{
return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
}
-#endif
-
#endif /* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index cba469b..9e2ae26 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -17,32 +17,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IN6_H
#define _LINUX_IN6_H
-#include <linux/types.h>
-
-/*
- * IPv6 address structure
- */
-
-struct in6_addr {
- union {
- __u8 u6_addr8[16];
- __be16 u6_addr16[8];
- __be32 u6_addr32[4];
- } in6_u;
-#define s6_addr in6_u.u6_addr8
-#define s6_addr16 in6_u.u6_addr16
-#define s6_addr32 in6_u.u6_addr32
-};
+#include <uapi/linux/in6.h>
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
extern const struct in6_addr in6addr_any;
#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
extern const struct in6_addr in6addr_loopback;
@@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters;
#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
#endif
-
-struct sockaddr_in6 {
- unsigned short int sin6_family; /* AF_INET6 */
- __be16 sin6_port; /* Transport layer port # */
- __be32 sin6_flowinfo; /* IPv6 flow information */
- struct in6_addr sin6_addr; /* IPv6 address */
- __u32 sin6_scope_id; /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
- /* IPv6 multicast address of group */
- struct in6_addr ipv6mr_multiaddr;
-
- /* local IPv6 address of interface */
- int ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
- struct in6_addr flr_dst;
- __be32 flr_label;
- __u8 flr_action;
- __u8 flr_share;
- __u16 flr_flags;
- __u16 flr_expires;
- __u16 flr_linger;
- __u32 __flr_pad;
- /* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET 0
-#define IPV6_FL_A_PUT 1
-#define IPV6_FL_A_RENEW 2
-
-#define IPV6_FL_F_CREATE 1
-#define IPV6_FL_F_EXCL 2
-
-#define IPV6_FL_S_NONE 0
-#define IPV6_FL_S_EXCL 1
-#define IPV6_FL_S_PROCESS 2
-#define IPV6_FL_S_USER 3
-#define IPV6_FL_S_ANY 255
-
-
-/*
- * Bitmask constant declarations to help applications select out the
- * flow label and priority fields.
- *
- * Note that this are in host byte order while the flowinfo field of
- * sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff
-#define IPV6_FLOWINFO_PRIORITY 0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000
-#define IPV6_PRIORITY_FILLER 0x0100
-#define IPV6_PRIORITY_UNATTENDED 0x0200
-#define IPV6_PRIORITY_RESERVED1 0x0300
-#define IPV6_PRIORITY_BULK 0x0400
-#define IPV6_PRIORITY_RESERVED2 0x0500
-#define IPV6_PRIORITY_INTERACTIVE 0x0600
-#define IPV6_PRIORITY_CONTROL 0x0700
-#define IPV6_PRIORITY_8 0x0800
-#define IPV6_PRIORITY_9 0x0900
-#define IPV6_PRIORITY_10 0x0a00
-#define IPV6_PRIORITY_11 0x0b00
-#define IPV6_PRIORITY_12 0x0c00
-#define IPV6_PRIORITY_13 0x0d00
-#define IPV6_PRIORITY_14 0x0e00
-#define IPV6_PRIORITY_15 0x0f00
-
-/*
- * IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
-#define IPPROTO_ROUTING 43 /* IPv6 routing header */
-#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
-#define IPPROTO_ICMPV6 58 /* ICMPv6 */
-#define IPPROTO_NONE 59 /* IPv6 no next header */
-#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
-#define IPPROTO_MH 135 /* IPv6 mobility header */
-
-/*
- * IPv6 TLV options.
- */
-#define IPV6_TLV_PAD1 0
-#define IPV6_TLV_PADN 1
-#define IPV6_TLV_ROUTERALERT 5
-#define IPV6_TLV_JUMBO 194
-#define IPV6_TLV_HAO 201 /* home address option */
-
-/*
- * IPV6 socket options
- */
-
-#define IPV6_ADDRFORM 1
-#define IPV6_2292PKTINFO 2
-#define IPV6_2292HOPOPTS 3
-#define IPV6_2292DSTOPTS 4
-#define IPV6_2292RTHDR 5
-#define IPV6_2292PKTOPTIONS 6
-#define IPV6_CHECKSUM 7
-#define IPV6_2292HOPLIMIT 8
-#define IPV6_NEXTHOP 9
-#define IPV6_AUTHHDR 10 /* obsolete */
-#define IPV6_FLOWINFO 11
-
-#define IPV6_UNICAST_HOPS 16
-#define IPV6_MULTICAST_IF 17
-#define IPV6_MULTICAST_HOPS 18
-#define IPV6_MULTICAST_LOOP 19
-#define IPV6_ADD_MEMBERSHIP 20
-#define IPV6_DROP_MEMBERSHIP 21
-#define IPV6_ROUTER_ALERT 22
-#define IPV6_MTU_DISCOVER 23
-#define IPV6_MTU 24
-#define IPV6_RECVERR 25
-#define IPV6_V6ONLY 26
-#define IPV6_JOIN_ANYCAST 27
-#define IPV6_LEAVE_ANYCAST 28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT 0
-#define IPV6_PMTUDISC_WANT 1
-#define IPV6_PMTUDISC_DO 2
-#define IPV6_PMTUDISC_PROBE 3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR 32
-#define IPV6_FLOWINFO_SEND 33
-
-#define IPV6_IPSEC_POLICY 34
-#define IPV6_XFRM_POLICY 35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP 42
- * MCAST_BLOCK_SOURCE 43
- * MCAST_UNBLOCK_SOURCE 44
- * MCAST_LEAVE_GROUP 45
- * MCAST_JOIN_SOURCE_GROUP 46
- * MCAST_LEAVE_SOURCE_GROUP 47
- * MCAST_MSFILTER 48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO 49
-#define IPV6_PKTINFO 50
-#define IPV6_RECVHOPLIMIT 51
-#define IPV6_HOPLIMIT 52
-#define IPV6_RECVHOPOPTS 53
-#define IPV6_HOPOPTS 54
-#define IPV6_RTHDRDSTOPTS 55
-#define IPV6_RECVRTHDR 56
-#define IPV6_RTHDR 57
-#define IPV6_RECVDSTOPTS 58
-#define IPV6_DSTOPTS 59
-#define IPV6_RECVPATHMTU 60
-#define IPV6_PATHMTU 61
-#define IPV6_DONTFRAG 62
-#if 0 /* not yet */
-#define IPV6_USE_MIN_MTU 63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS 66
-#define IPV6_TCLASS 67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH 68
- * IP6T_SO_GET_REVISION_TARGET 69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES 72
-
-#define IPV6_PREFER_SRC_TMP 0x0001
-#define IPV6_PREFER_SRC_PUBLIC 0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100
-#define IPV6_PREFER_SRC_COA 0x0004
-#define IPV6_PREFER_SRC_HOME 0x0400
-#define IPV6_PREFER_SRC_CGA 0x0008
-#define IPV6_PREFER_SRC_NONCGA 0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT 73
-
-#define IPV6_ORIGDSTADDR 74
-#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT 75
-#define IPV6_UNICAST_IF 76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT 200
- * MRT6_DONE 201
- * MRT6_ADD_MIF 202
- * MRT6_DEL_MIF 203
- * MRT6_ADD_MFC 204
- * MRT6_DEL_MFC 205
- * MRT6_VERSION 206
- * MRT6_ASSERT 207
- * MRT6_PIM 208
- * (reserved) 209
- */
-#endif
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
deleted file mode 100644
index b261b8c..0000000
--- a/include/linux/in_route.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _LINUX_IN_ROUTE_H
-#define _LINUX_IN_ROUTE_H
-
-/* IPv4 routing cache flags */
-
-#define RTCF_DEAD RTNH_F_DEAD
-#define RTCF_ONLINK RTNH_F_ONLINK
-
-/* Obsolete flag. About to be deleted */
-#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
-
-#define RTCF_NOTIFY 0x00010000
-#define RTCF_DIRECTDST 0x00020000 /* unused */
-#define RTCF_REDIRECTED 0x00040000
-#define RTCF_TPROXY 0x00080000 /* unused */
-
-#define RTCF_FAST 0x00200000 /* unused */
-#define RTCF_MASQ 0x00400000 /* unused */
-#define RTCF_SNAT 0x00800000 /* unused */
-#define RTCF_DOREDIRECT 0x01000000
-#define RTCF_DIRECTSRC 0x04000000
-#define RTCF_DNAT 0x08000000
-#define RTCF_BROADCAST 0x10000000
-#define RTCF_MULTICAST 0x20000000
-#define RTCF_REJECT 0x40000000 /* unused */
-#define RTCF_LOCAL 0x80000000
-
-#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT)
-
-#define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
-
-#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index e788c18..46da024 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,138 +1,8 @@
#ifndef _INET_DIAG_H_
#define _INET_DIAG_H_ 1
-#include <linux/types.h>
+#include <uapi/linux/inet_diag.h>
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
- __be16 idiag_sport;
- __be16 idiag_dport;
- __be32 idiag_src[4];
- __be32 idiag_dst[4];
- __u32 idiag_if;
- __u32 idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
- __u8 idiag_family; /* Family of addresses. */
- __u8 idiag_src_len;
- __u8 idiag_dst_len;
- __u8 idiag_ext; /* Query extended information */
-
- struct inet_diag_sockid id;
-
- __u32 idiag_states; /* States to dump */
- __u32 idiag_dbs; /* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
- __u8 idiag_ext;
- __u8 pad;
- __u32 idiag_states;
- struct inet_diag_sockid id;
-};
-
-enum {
- INET_DIAG_REQ_NONE,
- INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
-
-struct inet_diag_bc_op {
- unsigned char code;
- unsigned char yes;
- unsigned short no;
-};
-
-enum {
- INET_DIAG_BC_NOP,
- INET_DIAG_BC_JMP,
- INET_DIAG_BC_S_GE,
- INET_DIAG_BC_S_LE,
- INET_DIAG_BC_D_GE,
- INET_DIAG_BC_D_LE,
- INET_DIAG_BC_AUTO,
- INET_DIAG_BC_S_COND,
- INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
- __u8 family;
- __u8 prefix_len;
- int port;
- __be32 addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
- __u8 idiag_family;
- __u8 idiag_state;
- __u8 idiag_timer;
- __u8 idiag_retrans;
-
- struct inet_diag_sockid id;
-
- __u32 idiag_expires;
- __u32 idiag_rqueue;
- __u32 idiag_wqueue;
- __u32 idiag_uid;
- __u32 idiag_inode;
-};
-
-/* Extensions */
-
-enum {
- INET_DIAG_NONE,
- INET_DIAG_MEMINFO,
- INET_DIAG_INFO,
- INET_DIAG_VEGASINFO,
- INET_DIAG_CONG,
- INET_DIAG_TOS,
- INET_DIAG_TCLASS,
- INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
- __u32 idiag_rmem;
- __u32 idiag_wmem;
- __u32 idiag_fmem;
- __u32 idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
- __u32 tcpv_enabled;
- __u32 tcpv_rttcnt;
- __u32 tcpv_rtt;
- __u32 tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
struct sock;
struct inet_hashinfo;
struct nlattr;
@@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk);
extern int inet_diag_register(const struct inet_diag_handler *handler);
extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
#endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index d33041e..23aede0 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -3,75 +3,12 @@
*
* Copyright (C) 2005 John McCutchan
*/
-
#ifndef _LINUX_INOTIFY_H
#define _LINUX_INOTIFY_H
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
- __s32 wd; /* watch descriptor */
- __u32 mask; /* watch mask */
- __u32 cookie; /* cookie to synchronize two events */
- __u32 len; /* length (including nulls) of name */
- char name[0]; /* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS 0x00000001 /* File was accessed */
-#define IN_MODIFY 0x00000002 /* File was modified */
-#define IN_ATTRIB 0x00000004 /* Metadata changed */
-#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */
-#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
-#define IN_OPEN 0x00000020 /* File was opened */
-#define IN_MOVED_FROM 0x00000040 /* File was moved from X */
-#define IN_MOVED_TO 0x00000080 /* File was moved to Y */
-#define IN_CREATE 0x00000100 /* Subfile was created */
-#define IN_DELETE 0x00000200 /* Subfile was deleted */
-#define IN_DELETE_SELF 0x00000400 /* Self was deleted */
-#define IN_MOVE_SELF 0x00000800 /* Self was moved */
-
-/* the following are legal events. they are sent as needed to any watch */
-#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */
-#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
-#define IN_IGNORED 0x00008000 /* File was ignored */
-
-/* helper events */
-#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */
-#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */
-#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */
-#define IN_ISDIR 0x40000000 /* event occurred against dir */
-#define IN_ONESHOT 0x80000000 /* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility. Apps will get only the
- * events that they originally wanted. Be sure to add new events here!
- */
-#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
- IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
- IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
- IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1. */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
#include <linux/sysctl.h>
+#include <uapi/linux/inotify.h>
+
extern struct ctl_table inotify_table[]; /* for sysctl */
#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
@@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */
IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
IN_ISDIR | IN_ONESHOT)
-#endif
-
#endif /* _LINUX_INOTIFY_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 15464ba..cab994b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1,6 +1,3 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
/*
* Copyright (c) 1999-2002 Vojtech Pavlik
*
@@ -8,1156 +5,15 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _INPUT_H
+#define _INPUT_H
-#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
- struct timeval time;
- __u16 type;
- __u16 code;
- __s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION 0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
- __u16 bustype;
- __u16 vendor;
- __u16 product;
- __u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- * the event stream.
- * @flat: values that are within this value will be discarded by
- * joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- * the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
- __s32 value;
- __s32 minimum;
- __s32 maximum;
- __s32 fuzz;
- __s32 flat;
- __s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- * should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX (1 << 0)
- __u8 flags;
- __u8 len;
- __u16 index;
- __u32 keycode;
- __u8 scancode[32];
-};
-
-#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
-#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
-#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
-#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-
-#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
-#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
-#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
-#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
-#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
-#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- * __u32 code;
- * __s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
-#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
-#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
-#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
-
-#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
-#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
-#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
-
-#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
-#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
-#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
-
-#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
-
-#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
-#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
-#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
-
-#define INPUT_PROP_MAX 0x1f
-#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN 0x00
-#define EV_KEY 0x01
-#define EV_REL 0x02
-#define EV_ABS 0x03
-#define EV_MSC 0x04
-#define EV_SW 0x05
-#define EV_LED 0x11
-#define EV_SND 0x12
-#define EV_REP 0x14
-#define EV_FF 0x15
-#define EV_PWR 0x16
-#define EV_FF_STATUS 0x17
-#define EV_MAX 0x1f
-#define EV_CNT (EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT 0
-#define SYN_CONFIG 1
-#define SYN_MT_REPORT 2
-#define SYN_DROPPED 3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_DIRECTION 153
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WIMAX 246
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_A 0x130
-#define BTN_B 0x131
-#define BTN_C 0x132
-#define BTN_X 0x133
-#define BTN_Y 0x134
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define BTN_TRIGGER_HAPPY 0x2c0
-#define BTN_TRIGGER_HAPPY1 0x2c0
-#define BTN_TRIGGER_HAPPY2 0x2c1
-#define BTN_TRIGGER_HAPPY3 0x2c2
-#define BTN_TRIGGER_HAPPY4 0x2c3
-#define BTN_TRIGGER_HAPPY5 0x2c4
-#define BTN_TRIGGER_HAPPY6 0x2c5
-#define BTN_TRIGGER_HAPPY7 0x2c6
-#define BTN_TRIGGER_HAPPY8 0x2c7
-#define BTN_TRIGGER_HAPPY9 0x2c8
-#define BTN_TRIGGER_HAPPY10 0x2c9
-#define BTN_TRIGGER_HAPPY11 0x2ca
-#define BTN_TRIGGER_HAPPY12 0x2cb
-#define BTN_TRIGGER_HAPPY13 0x2cc
-#define BTN_TRIGGER_HAPPY14 0x2cd
-#define BTN_TRIGGER_HAPPY15 0x2ce
-#define BTN_TRIGGER_HAPPY16 0x2cf
-#define BTN_TRIGGER_HAPPY17 0x2d0
-#define BTN_TRIGGER_HAPPY18 0x2d1
-#define BTN_TRIGGER_HAPPY19 0x2d2
-#define BTN_TRIGGER_HAPPY20 0x2d3
-#define BTN_TRIGGER_HAPPY21 0x2d4
-#define BTN_TRIGGER_HAPPY22 0x2d5
-#define BTN_TRIGGER_HAPPY23 0x2d6
-#define BTN_TRIGGER_HAPPY24 0x2d7
-#define BTN_TRIGGER_HAPPY25 0x2d8
-#define BTN_TRIGGER_HAPPY26 0x2d9
-#define BTN_TRIGGER_HAPPY27 0x2da
-#define BTN_TRIGGER_HAPPY28 0x2db
-#define BTN_TRIGGER_HAPPY29 0x2dc
-#define BTN_TRIGGER_HAPPY30 0x2dd
-#define BTN_TRIGGER_HAPPY31 0x2de
-#define BTN_TRIGGER_HAPPY32 0x2df
-#define BTN_TRIGGER_HAPPY33 0x2e0
-#define BTN_TRIGGER_HAPPY34 0x2e1
-#define BTN_TRIGGER_HAPPY35 0x2e2
-#define BTN_TRIGGER_HAPPY36 0x2e3
-#define BTN_TRIGGER_HAPPY37 0x2e4
-#define BTN_TRIGGER_HAPPY38 0x2e5
-#define BTN_TRIGGER_HAPPY39 0x2e6
-#define BTN_TRIGGER_HAPPY40 0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING KEY_MUTE
-#define KEY_MAX 0x2ff
-#define KEY_CNT (KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X 0x00
-#define REL_Y 0x01
-#define REL_Z 0x02
-#define REL_RX 0x03
-#define REL_RY 0x04
-#define REL_RZ 0x05
-#define REL_HWHEEL 0x06
-#define REL_DIAL 0x07
-#define REL_WHEEL 0x08
-#define REL_MISC 0x09
-#define REL_MAX 0x0f
-#define REL_CNT (REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X 0x00
-#define ABS_Y 0x01
-#define ABS_Z 0x02
-#define ABS_RX 0x03
-#define ABS_RY 0x04
-#define ABS_RZ 0x05
-#define ABS_THROTTLE 0x06
-#define ABS_RUDDER 0x07
-#define ABS_WHEEL 0x08
-#define ABS_GAS 0x09
-#define ABS_BRAKE 0x0a
-#define ABS_HAT0X 0x10
-#define ABS_HAT0Y 0x11
-#define ABS_HAT1X 0x12
-#define ABS_HAT1Y 0x13
-#define ABS_HAT2X 0x14
-#define ABS_HAT2Y 0x15
-#define ABS_HAT3X 0x16
-#define ABS_HAT3Y 0x17
-#define ABS_PRESSURE 0x18
-#define ABS_DISTANCE 0x19
-#define ABS_TILT_X 0x1a
-#define ABS_TILT_Y 0x1b
-#define ABS_TOOL_WIDTH 0x1c
-
-#define ABS_VOLUME 0x20
-
-#define ABS_MISC 0x28
-
-#define ABS_MT_SLOT 0x2f /* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
-#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
-#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
-#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
-#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
-#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
-#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
-
-#ifdef __KERNEL__
+#include <uapi/linux/input.h>
/* Implementation details, userspace should not care about these */
#define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR
#define ABS_MT_LAST ABS_MT_TOOL_Y
-#endif
-
-#define ABS_MAX 0x3f
-#define ABS_CNT (ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID 0x00 /* set = lid shut */
-#define SW_TABLET_MODE 0x01 /* set = tablet mode */
-#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
- set = radio enabled */
-#define SW_RADIO SW_RFKILL_ALL /* deprecated */
-#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
-#define SW_DOCK 0x05 /* set = plugged into dock */
-#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
-#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
-#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT 0x0d /* set = inserted */
-#define SW_MAX 0x0f
-#define SW_CNT (SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL 0x00
-#define MSC_PULSELED 0x01
-#define MSC_GESTURE 0x02
-#define MSC_RAW 0x03
-#define MSC_SCAN 0x04
-#define MSC_MAX 0x07
-#define MSC_CNT (MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML 0x00
-#define LED_CAPSL 0x01
-#define LED_SCROLLL 0x02
-#define LED_COMPOSE 0x03
-#define LED_KANA 0x04
-#define LED_SLEEP 0x05
-#define LED_SUSPEND 0x06
-#define LED_MUTE 0x07
-#define LED_MISC 0x08
-#define LED_MAIL 0x09
-#define LED_CHARGING 0x0a
-#define LED_MAX 0x0f
-#define LED_CNT (LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY 0x00
-#define REP_PERIOD 0x01
-#define REP_MAX 0x01
-#define REP_CNT (REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK 0x00
-#define SND_BELL 0x01
-#define SND_TONE 0x02
-#define SND_MAX 0x07
-#define SND_CNT (SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS 0
-#define ID_VENDOR 1
-#define ID_PRODUCT 2
-#define ID_VERSION 3
-
-#define BUS_PCI 0x01
-#define BUS_ISAPNP 0x02
-#define BUS_USB 0x03
-#define BUS_HIL 0x04
-#define BUS_BLUETOOTH 0x05
-#define BUS_VIRTUAL 0x06
-
-#define BUS_ISA 0x10
-#define BUS_I8042 0x11
-#define BUS_XTKBD 0x12
-#define BUS_RS232 0x13
-#define BUS_GAMEPORT 0x14
-#define BUS_PARPORT 0x15
-#define BUS_AMIGA 0x16
-#define BUS_ADB 0x17
-#define BUS_I2C 0x18
-#define BUS_HOST 0x19
-#define BUS_GSC 0x1A
-#define BUS_ATARI 0x1B
-#define BUS_SPI 0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER 0
-#define MT_TOOL_PEN 1
-#define MT_TOOL_MAX 1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED 0x00
-#define FF_STATUS_PLAYING 0x01
-#define FF_STATUS_MAX 0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
- __u16 length;
- __u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
- __u16 button;
- __u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
- __u16 attack_length;
- __u16 attack_level;
- __u16 fade_length;
- __u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
- __s16 level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
- __s16 start_level;
- __s16 end_level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- * to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
- __u16 right_saturation;
- __u16 left_saturation;
-
- __s16 right_coeff;
- __s16 left_coeff;
-
- __u16 deadband;
- __s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
- __u16 waveform;
- __u16 period;
- __s16 magnitude;
- __s16 offset;
- __u16 phase;
-
- struct ff_envelope envelope;
-
- __u32 custom_len;
- __s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
- __u16 strong_magnitude;
- __u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- * defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- * 0 deg -> 0x0000 (down)
- * 90 deg -> 0x4000 (left)
- * 180 deg -> 0x8000 (up)
- * 270 deg -> 0xC000 (right)
- */
-struct ff_effect {
- __u16 type;
- __s16 id;
- __u16 direction;
- struct ff_trigger trigger;
- struct ff_replay replay;
-
- union {
- struct ff_constant_effect constant;
- struct ff_ramp_effect ramp;
- struct ff_periodic_effect periodic;
- struct ff_condition_effect condition[2]; /* One for each axis */
- struct ff_rumble_effect rumble;
- } u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE 0x50
-#define FF_PERIODIC 0x51
-#define FF_CONSTANT 0x52
-#define FF_SPRING 0x53
-#define FF_FRICTION 0x54
-#define FF_DAMPER 0x55
-#define FF_INERTIA 0x56
-#define FF_RAMP 0x57
-
-#define FF_EFFECT_MIN FF_RUMBLE
-#define FF_EFFECT_MAX FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE 0x58
-#define FF_TRIANGLE 0x59
-#define FF_SINE 0x5a
-#define FF_SAW_UP 0x5b
-#define FF_SAW_DOWN 0x5c
-#define FF_CUSTOM 0x5d
-
-#define FF_WAVEFORM_MIN FF_SQUARE
-#define FF_WAVEFORM_MAX FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN 0x60
-#define FF_AUTOCENTER 0x61
-
-#define FF_MAX 0x7f
-#define FF_CNT (FF_MAX+1)
-
-#ifdef __KERNEL__
/*
* In-kernel definitions.
@@ -1668,4 +524,3 @@ int input_ff_create_memless(struct input_dev *dev, void *data,
int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
#endif
-#endif
diff --git a/include/linux/ioctl.h b/include/linux/ioctl.h
deleted file mode 100644
index aa91eb3..0000000
--- a/include/linux/ioctl.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _LINUX_IOCTL_H
-#define _LINUX_IOCTL_H
-
-#include <asm/ioctl.h>
-
-#endif /* _LINUX_IOCTL_H */
-
diff --git a/include/linux/ip.h b/include/linux/ip.h
index bd0a2a8..58b82a2 100644
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -16,96 +16,9 @@
*/
#ifndef _LINUX_IP_H
#define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#define IPTOS_TOS_MASK 0x1E
-#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
-#define IPTOS_LOWDELAY 0x10
-#define IPTOS_THROUGHPUT 0x08
-#define IPTOS_RELIABILITY 0x04
-#define IPTOS_MINCOST 0x02
-
-#define IPTOS_PREC_MASK 0xE0
-#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL 0xe0
-#define IPTOS_PREC_INTERNETCONTROL 0xc0
-#define IPTOS_PREC_CRITIC_ECP 0xa0
-#define IPTOS_PREC_FLASHOVERRIDE 0x80
-#define IPTOS_PREC_FLASH 0x60
-#define IPTOS_PREC_IMMEDIATE 0x40
-#define IPTOS_PREC_PRIORITY 0x20
-#define IPTOS_PREC_ROUTINE 0x00
-
-
-/* IP options */
-#define IPOPT_COPY 0x80
-#define IPOPT_CLASS_MASK 0x60
-#define IPOPT_NUMBER_MASK 0x1f
-
-#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
-#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
-#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
-
-#define IPOPT_CONTROL 0x00
-#define IPOPT_RESERVED1 0x20
-#define IPOPT_MEASUREMENT 0x40
-#define IPOPT_RESERVED2 0x60
-
-#define IPOPT_END (0 |IPOPT_CONTROL)
-#define IPOPT_NOOP (1 |IPOPT_CONTROL)
-#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR (7 |IPOPT_CONTROL)
-#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION 4
-#define MAXTTL 255
-#define IPDEFTTL 64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN 1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS IPOPT_TIMESTAMP
-
-#define IPOPT_TS_TSONLY 0 /* timestamps only */
-#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
-#define IPOPT_TS_PRESPEC 3 /* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 ihl:4,
- version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
- __u8 version:4,
- ihl:4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 tos;
- __be16 tot_len;
- __be16 id;
- __be16 frag_off;
- __u8 ttl;
- __u8 protocol;
- __sum16 check;
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/ip.h>
static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
{
@@ -116,34 +29,4 @@ static inline struct iphdr *ipip_hdr(const struct sk_buff *skb)
{
return (struct iphdr *)skb_transport_header(skb);
}
-#endif
-
-struct ip_auth_hdr {
- __u8 nexthdr;
- __u8 hdrlen; /* This one is measured in 32 bit units! */
- __be16 reserved;
- __be32 spi;
- __be32 seq_no; /* Sequence number */
- __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
- __be32 spi;
- __be32 seq_no; /* Sequence number */
- __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
- __u8 nexthdr;
- __u8 flags;
- __be16 cpi;
-};
-
-struct ip_beet_phdr {
- __u8 nexthdr;
- __u8 hdrlen;
- __u8 padlen;
- __u8 reserved;
-};
-
#endif /* _LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
deleted file mode 100644
index 48af63c..0000000
--- a/include/linux/ip6_tunnel.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _IP6_TUNNEL_H
-#define _IP6_TUNNEL_H
-
-#include <linux/types.h>
-
-#define IPV6_TLV_TNL_ENCAP_LIMIT 4
-#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
-
-/* don't add encapsulation limit if one isn't present in inner packet */
-#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
-/* copy the traffic class field from the inner packet */
-#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
-/* copy the flowlabel from the inner packet */
-#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
-/* being used for Mobile IPv6 */
-#define IP6_TNL_F_MIP6_DEV 0x8
-/* copy DSCP from the outer packet */
-#define IP6_TNL_F_RCV_DSCP_COPY 0x10
-/* copy fwmark from inner packet */
-#define IP6_TNL_F_USE_ORIG_FWMARK 0x20
-
-struct ip6_tnl_parm {
- char name[IFNAMSIZ]; /* name of tunnel device */
- int link; /* ifindex of underlying L2 interface */
- __u8 proto; /* tunnel protocol */
- __u8 encap_limit; /* encapsulation limit for tunnel */
- __u8 hop_limit; /* hop limit for tunnel */
- __be32 flowinfo; /* traffic class and flowlabel for tunnel */
- __u32 flags; /* tunnel flags */
- struct in6_addr laddr; /* local tunnel end-point address */
- struct in6_addr raddr; /* remote tunnel end-point address */
-};
-
-struct ip6_tnl_parm2 {
- char name[IFNAMSIZ]; /* name of tunnel device */
- int link; /* ifindex of underlying L2 interface */
- __u8 proto; /* tunnel protocol */
- __u8 encap_limit; /* encapsulation limit for tunnel */
- __u8 hop_limit; /* hop limit for tunnel */
- __be32 flowinfo; /* traffic class and flowlabel for tunnel */
- __u32 flags; /* tunnel flags */
- struct in6_addr laddr; /* local tunnel end-point address */
- struct in6_addr raddr; /* remote tunnel end-point address */
-
- __be16 i_flags;
- __be16 o_flags;
- __be32 i_key;
- __be32 o_key;
-};
-
-#endif
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
deleted file mode 100644
index 8a2d438..0000000
--- a/include/linux/ip_vs.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * IP Virtual Server
- * data structure and functionality definitions
- */
-
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <linux/types.h> /* For __beXX types in userland */
-
-#define IP_VS_VERSION_CODE 0x010201
-#define NVERSION(version) \
- (version >> 16) & 0xFF, \
- (version >> 8) & 0xFF, \
- version & 0xFF
-
-/*
- * Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */
-#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */
-#define IP_VS_SVC_F_ONEPACKET 0x0004 /* one-packet scheduling */
-
-/*
- * Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */
-#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */
-
-/*
- * IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */
-#define IP_VS_STATE_MASTER 0x0001 /* started as master */
-#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */
-
-/*
- * IPVS socket options
- */
-#define IP_VS_BASE_CTL (64+1024+64) /* base */
-
-#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */
-#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */
-#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON
-
-
-/*
- * IPVS Connection Flags
- * Only flags 0..15 are sent to backup server
- */
-#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */
-#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */
-#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */
-#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */
-#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */
-#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */
-#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */
-#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */
-#define IP_VS_CONN_F_ONE_PACKET 0x2000 /* forward only one packet */
-
-/* Initial bits allowed in backup server */
-#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \
- IP_VS_CONN_F_NOOUTPUT | \
- IP_VS_CONN_F_INACTIVE | \
- IP_VS_CONN_F_SEQ_MASK | \
- IP_VS_CONN_F_NO_CPORT | \
- IP_VS_CONN_F_TEMPLATE \
- )
-
-/* Bits allowed to update in backup server */
-#define IP_VS_CONN_F_BACKUP_UPD_MASK (IP_VS_CONN_F_INACTIVE | \
- IP_VS_CONN_F_SEQ_MASK)
-
-/* Flags that are not sent to backup server start from bit 16 */
-#define IP_VS_CONN_F_NFCT (1 << 16) /* use netfilter conntrack */
-
-/* Connection flags from destination that can be changed by user space */
-#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \
- IP_VS_CONN_F_ONE_PACKET | \
- IP_VS_CONN_F_NFCT | \
- 0)
-
-#define IP_VS_SCHEDNAME_MAXLEN 16
-#define IP_VS_PENAME_MAXLEN 16
-#define IP_VS_IFNAME_MAXLEN 16
-
-#define IP_VS_PEDATA_MAXLEN 255
-
-/*
- * The struct ip_vs_service_user and struct ip_vs_dest_user are
- * used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
- /* virtual service addresses */
- __u16 protocol;
- __be32 addr; /* virtual ip address */
- __be16 port;
- __u32 fwmark; /* firwall mark of service */
-
- /* virtual service options */
- char sched_name[IP_VS_SCHEDNAME_MAXLEN];
- unsigned int flags; /* virtual service flags */
- unsigned int timeout; /* persistent timeout in sec */
- __be32 netmask; /* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
- /* destination server address */
- __be32 addr;
- __be16 port;
-
- /* real server options */
- unsigned int conn_flags; /* connection flags */
- int weight; /* destination weight */
-
- /* thresholds for active connections */
- __u32 u_threshold; /* upper threshold */
- __u32 l_threshold; /* lower threshold */
-};
-
-
-/*
- * IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user {
- __u32 conns; /* connections scheduled */
- __u32 inpkts; /* incoming packets */
- __u32 outpkts; /* outgoing packets */
- __u64 inbytes; /* incoming bytes */
- __u64 outbytes; /* outgoing bytes */
-
- __u32 cps; /* current connection rate */
- __u32 inpps; /* current in packet rate */
- __u32 outpps; /* current out packet rate */
- __u32 inbps; /* current in byte rate */
- __u32 outbps; /* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
- /* version number */
- unsigned int version;
-
- /* size of connection hash table */
- unsigned int size;
-
- /* number of virtual services */
- unsigned int num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
- /* which service: user fills in these */
- __u16 protocol;
- __be32 addr; /* virtual address */
- __be16 port;
- __u32 fwmark; /* firwall mark of service */
-
- /* service options */
- char sched_name[IP_VS_SCHEDNAME_MAXLEN];
- unsigned int flags; /* virtual service flags */
- unsigned int timeout; /* persistent timeout */
- __be32 netmask; /* persistent netmask */
-
- /* number of real servers */
- unsigned int num_dests;
-
- /* statistics */
- struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
- __be32 addr; /* destination address */
- __be16 port;
- unsigned int conn_flags; /* connection flags */
- int weight; /* destination weight */
-
- __u32 u_threshold; /* upper threshold */
- __u32 l_threshold; /* lower threshold */
-
- __u32 activeconns; /* active connections */
- __u32 inactconns; /* inactive connections */
- __u32 persistconns; /* persistent connections */
-
- /* statistics */
- struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
- /* which service: user fills in these */
- __u16 protocol;
- __be32 addr; /* virtual address */
- __be16 port;
- __u32 fwmark; /* firwall mark of service */
-
- /* number of real servers */
- unsigned int num_dests;
-
- /* the real servers */
- struct ip_vs_dest_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
- /* number of virtual services */
- unsigned int num_services;
-
- /* service table */
- struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
- int tcp_timeout;
- int tcp_fin_timeout;
- int udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
- /* sync daemon state (master/backup) */
- int state;
-
- /* multicast interface name */
- char mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
- /* SyncID we belong to */
- int syncid;
-};
-
-/*
- *
- * IPVS Generic Netlink interface definitions
- *
- */
-
-/* Generic Netlink family info */
-
-#define IPVS_GENL_NAME "IPVS"
-#define IPVS_GENL_VERSION 0x1
-
-struct ip_vs_flags {
- __be32 flags;
- __be32 mask;
-};
-
-/* Generic Netlink command attributes */
-enum {
- IPVS_CMD_UNSPEC = 0,
-
- IPVS_CMD_NEW_SERVICE, /* add service */
- IPVS_CMD_SET_SERVICE, /* modify service */
- IPVS_CMD_DEL_SERVICE, /* delete service */
- IPVS_CMD_GET_SERVICE, /* get service info */
-
- IPVS_CMD_NEW_DEST, /* add destination */
- IPVS_CMD_SET_DEST, /* modify destination */
- IPVS_CMD_DEL_DEST, /* delete destination */
- IPVS_CMD_GET_DEST, /* get destination info */
-
- IPVS_CMD_NEW_DAEMON, /* start sync daemon */
- IPVS_CMD_DEL_DAEMON, /* stop sync daemon */
- IPVS_CMD_GET_DAEMON, /* get sync daemon status */
-
- IPVS_CMD_SET_CONFIG, /* set config settings */
- IPVS_CMD_GET_CONFIG, /* get config settings */
-
- IPVS_CMD_SET_INFO, /* only used in GET_INFO reply */
- IPVS_CMD_GET_INFO, /* get general IPVS info */
-
- IPVS_CMD_ZERO, /* zero all counters and stats */
- IPVS_CMD_FLUSH, /* flush services and dests */
-
- __IPVS_CMD_MAX,
-};
-
-#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1)
-
-/* Attributes used in the first level of commands */
-enum {
- IPVS_CMD_ATTR_UNSPEC = 0,
- IPVS_CMD_ATTR_SERVICE, /* nested service attribute */
- IPVS_CMD_ATTR_DEST, /* nested destination attribute */
- IPVS_CMD_ATTR_DAEMON, /* nested sync daemon attribute */
- IPVS_CMD_ATTR_TIMEOUT_TCP, /* TCP connection timeout */
- IPVS_CMD_ATTR_TIMEOUT_TCP_FIN, /* TCP FIN wait timeout */
- IPVS_CMD_ATTR_TIMEOUT_UDP, /* UDP timeout */
- __IPVS_CMD_ATTR_MAX,
-};
-
-#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a service
- *
- * Used inside nested attribute IPVS_CMD_ATTR_SERVICE
- */
-enum {
- IPVS_SVC_ATTR_UNSPEC = 0,
- IPVS_SVC_ATTR_AF, /* address family */
- IPVS_SVC_ATTR_PROTOCOL, /* virtual service protocol */
- IPVS_SVC_ATTR_ADDR, /* virtual service address */
- IPVS_SVC_ATTR_PORT, /* virtual service port */
- IPVS_SVC_ATTR_FWMARK, /* firewall mark of service */
-
- IPVS_SVC_ATTR_SCHED_NAME, /* name of scheduler */
- IPVS_SVC_ATTR_FLAGS, /* virtual service flags */
- IPVS_SVC_ATTR_TIMEOUT, /* persistent timeout */
- IPVS_SVC_ATTR_NETMASK, /* persistent netmask */
-
- IPVS_SVC_ATTR_STATS, /* nested attribute for service stats */
-
- IPVS_SVC_ATTR_PE_NAME, /* name of ct retriever */
-
- __IPVS_SVC_ATTR_MAX,
-};
-
-#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a destination (real server)
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DEST
- */
-enum {
- IPVS_DEST_ATTR_UNSPEC = 0,
- IPVS_DEST_ATTR_ADDR, /* real server address */
- IPVS_DEST_ATTR_PORT, /* real server port */
-
- IPVS_DEST_ATTR_FWD_METHOD, /* forwarding method */
- IPVS_DEST_ATTR_WEIGHT, /* destination weight */
-
- IPVS_DEST_ATTR_U_THRESH, /* upper threshold */
- IPVS_DEST_ATTR_L_THRESH, /* lower threshold */
-
- IPVS_DEST_ATTR_ACTIVE_CONNS, /* active connections */
- IPVS_DEST_ATTR_INACT_CONNS, /* inactive connections */
- IPVS_DEST_ATTR_PERSIST_CONNS, /* persistent connections */
-
- IPVS_DEST_ATTR_STATS, /* nested attribute for dest stats */
- __IPVS_DEST_ATTR_MAX,
-};
-
-#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1)
-
-/*
- * Attributes describing a sync daemon
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DAEMON
- */
-enum {
- IPVS_DAEMON_ATTR_UNSPEC = 0,
- IPVS_DAEMON_ATTR_STATE, /* sync daemon state (master/backup) */
- IPVS_DAEMON_ATTR_MCAST_IFN, /* multicast interface name */
- IPVS_DAEMON_ATTR_SYNC_ID, /* SyncID we belong to */
- __IPVS_DAEMON_ATTR_MAX,
-};
-
-#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe service or destination entry statistics
- *
- * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS
- */
-enum {
- IPVS_STATS_ATTR_UNSPEC = 0,
- IPVS_STATS_ATTR_CONNS, /* connections scheduled */
- IPVS_STATS_ATTR_INPKTS, /* incoming packets */
- IPVS_STATS_ATTR_OUTPKTS, /* outgoing packets */
- IPVS_STATS_ATTR_INBYTES, /* incoming bytes */
- IPVS_STATS_ATTR_OUTBYTES, /* outgoing bytes */
-
- IPVS_STATS_ATTR_CPS, /* current connection rate */
- IPVS_STATS_ATTR_INPPS, /* current in packet rate */
- IPVS_STATS_ATTR_OUTPPS, /* current out packet rate */
- IPVS_STATS_ATTR_INBPS, /* current in byte rate */
- IPVS_STATS_ATTR_OUTBPS, /* current out byte rate */
- __IPVS_STATS_ATTR_MAX,
-};
-
-#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1)
-
-/* Attributes used in response to IPVS_CMD_GET_INFO command */
-enum {
- IPVS_INFO_ATTR_UNSPEC = 0,
- IPVS_INFO_ATTR_VERSION, /* IPVS version number */
- IPVS_INFO_ATTR_CONN_TAB_SIZE, /* size of connection hash table */
- __IPVS_INFO_ATTR_MAX,
-};
-
-#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1)
-
-#endif /* _IP_VS_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index ca833fd..8d861b2 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -1,85 +1,9 @@
#ifndef _LINUX_IPC_H
#define _LINUX_IPC_H
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
- __kernel_key_t key;
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_uid_t cuid;
- __kernel_gid_t cgid;
- __kernel_mode_t mode;
- unsigned short seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT 00001000 /* create if key is nonexistent */
-#define IPC_EXCL 00002000 /* fail if key exists */
-#define IPC_NOWAIT 00004000 /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
- should avoid using them if possible */
-
-#define IPC_DIPC 00010000 /* make it distributed */
-#define IPC_OWN 00020000 /* this machine is the DIPC owner */
-
-/*
- * Control commands used with semctl, msgctl and shmctl
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0 /* remove resource */
-#define IPC_SET 1 /* set ipc_perm options */
-#define IPC_STAT 2 /* get ipc_perm options */
-#define IPC_INFO 3 /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0 /* Old version (no 32-bit UID support on many
- architectures) */
-#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger
- message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
- struct msgbuf __user *msgp;
- long msgtyp;
-};
-
-#define SEMOP 1
-#define SEMGET 2
-#define SEMCTL 3
-#define SEMTIMEDOP 4
-#define MSGSND 11
-#define MSGRCV 12
-#define MSGGET 13
-#define MSGCTL 14
-#define SHMAT 21
-#define SHMDT 22
-#define SHMGET 23
-#define SHMCTL 24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC 25
-
-#define IPCCALL(version,op) ((version)<<16 | (op))
-
-#ifdef __KERNEL__
#include <linux/spinlock.h>
#include <linux/uidgid.h>
+#include <uapi/linux/ipc.h>
#define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
@@ -99,6 +23,4 @@ struct kern_ipc_perm
void *security;
};
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9..1487e79 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef __LINUX_IPMI_H
#define __LINUX_IPMI_H
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
-
-/*
- * This file describes an interface to an IPMI driver. You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver. The physical interfaces bind as a lower layer on the
- * driver. They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc. The driver keeps track of
- * commands the user sends and tracks the responses. The responses
- * will go back to the application that send the command. If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application. Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it. Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications. The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different. The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface. The userland
- * interface is defined later in the file. */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type. This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
- /* Try to take these from the "Channel Medium Type" table
- in section 6.5 of the IPMI 1.5 manual. */
- int addr_type;
- short channel;
- char data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c
-struct ipmi_system_interface_addr {
- int addr_type;
- short channel;
- unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE 0x01
-/* Used for broadcast get device id as described in section 17.9 of the
- IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41
-struct ipmi_ipmb_addr {
- int addr_type;
- short channel;
- unsigned char slave_addr;
- unsigned char lun;
-};
-
-/*
- * A LAN Address. This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec. We do not use rqSWID and rsSWID like it shows in the
- * message. Instead, we use remote_SWID and local_SWID. This means
- * that any message (a request or response) from another device will
- * always have exactly the same address. If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID. Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE 0x04
-struct ipmi_lan_addr {
- int addr_type;
- short channel;
- unsigned char privilege;
- unsigned char session_handle;
- unsigned char remote_SWID;
- unsigned char local_SWID;
- unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC. When using this
- * channel, This is for the system interface address type only. FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL 0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask. This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL (~0)
-
-
-/*
- * A raw IPMI message without any addressing. This covers both
- * commands and responses. The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char __user *data;
-};
-
-struct kernel_ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff
-
+#include <uapi/linux/ipmi.h>
-/*
- * Receive types for messages coming from the receive interface. This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for
- a sent response, giving any
- error status for sending the
- response. When you send a
- response message, this will
- be returned. */
-#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
- code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO
- * setting is the default and means it will be set on certain
- * commands. Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO 0
-#define IPMI_MAINTENANCE_MODE_OFF 1
-#define IPMI_MAINTENANCE_MODE_ON 2
-
-#ifdef __KERNEL__
/*
* The in-kernel interface.
@@ -493,244 +313,4 @@ struct ipmi_smi_info {
/* This is to get the private info of ipmi_smi_t */
extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data. select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back. You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report. You will only receive reponses for commands you
- * send. Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type. When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel. You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
- unsigned char __user *addr; /* Address to send the message to. */
- unsigned int addr_len;
-
- long msgid; /* The sequence number for the message. This
- exact value will be reported back in the
- response to this request if it is a command.
- If it is a response, this will be used as
- the sequence value for the response. */
-
- struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces. error values are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \
- struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
- format. */
-struct ipmi_req_settime {
- struct ipmi_req req;
-
- /* See ipmi_request_settime() above for details on these
- values. */
- int retries;
- unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters. error values
- * are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \
- struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
- int recv_type; /* Is this a command, response or an
- asyncronous event. */
-
- unsigned char __user *addr; /* Address the message was from is put
- here. The caller must supply the
- memory. */
- unsigned int addr_len; /* The size of the address buffer.
- The caller supplies the full buffer
- length, this value is updated to
- the actual message length when the
- message is received. */
-
- long msgid; /* The sequence number specified in the request
- if this is a response. If this is a command,
- this will be the sequence number from the
- command. */
-
- struct ipmi_msg msg; /* The data field must point to a buffer.
- The data_size field must be set to the
- size of the message buffer. The
- caller supplies the full buffer
- length, this value is updated to the
- actual message length when the message
- is received. */
-};
-
-/*
- * Receive a message. error values:
- * - EAGAIN - no messages in the queue.
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid.
- * - EMSGSIZE - The message to was too large to fit into the message buffer,
- * the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \
- struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \
- struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
- unsigned char netfn;
- unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - The netfn/cmd supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
- struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \
- struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else. The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
- unsigned int netfn;
- unsigned int cmd;
- unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \
- struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \
- struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events. Note that the first
- * user registered for events will get all pending events for the
- * interface. error values:
- * - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages. Note that this affects the interface, not just
- * this user, so it will affect all users of this interface. This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else. You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
- unsigned short channel;
- unsigned char value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface. You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
- int retries;
- unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \
- struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \
- struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode. See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int)
-
#endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
deleted file mode 100644
index df97e6e..0000000
--- a/include/linux/ipmi_msgdefs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * ipmi_smi.h
- *
- * MontaVista IPMI system management interface
- *
- * Author: MontaVista Software, Inc.
- * Corey Minyard <minyard@mvista.com>
- * source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_IPMI_MSGDEFS_H
-#define __LINUX_IPMI_MSGDEFS_H
-
-/* Various definitions for IPMI messages used by almost everything in
- the IPMI stack. */
-
-/* NetFNs and commands used inside the IPMI stack. */
-
-#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04
-#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05
-#define IPMI_GET_EVENT_RECEIVER_CMD 0x01
-
-#define IPMI_NETFN_APP_REQUEST 0x06
-#define IPMI_NETFN_APP_RESPONSE 0x07
-#define IPMI_GET_DEVICE_ID_CMD 0x01
-#define IPMI_COLD_RESET_CMD 0x02
-#define IPMI_WARM_RESET_CMD 0x03
-#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30
-#define IPMI_GET_DEVICE_GUID_CMD 0x08
-#define IPMI_GET_MSG_FLAGS_CMD 0x31
-#define IPMI_SEND_MSG_CMD 0x34
-#define IPMI_GET_MSG_CMD 0x33
-#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e
-#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f
-#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
-#define IPMI_GET_CHANNEL_INFO_CMD 0x42
-
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR 0x01
-#define IPMI_BMC_EVT_MSG_INTR 0x02
-#define IPMI_BMC_EVT_MSG_BUFF 0x04
-#define IPMI_BMC_SYS_LOG 0x08
-
-#define IPMI_NETFN_STORAGE_REQUEST 0x0a
-#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
-#define IPMI_ADD_SEL_ENTRY_CMD 0x44
-
-#define IPMI_NETFN_FIRMWARE_REQUEST 0x08
-#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09
-
-/* The default slave address */
-#define IPMI_BMC_SLAVE_ADDR 0x20
-
-/* The BT interface on high-end HP systems supports up to 255 bytes in
- * one transfer. Its "virtual" BMC supports some commands that are longer
- * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead; it's not worth the effort to dynamically size this based
- * on the results of the "Get BT Capabilities" command. */
-#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */
-
-#define IPMI_CC_NO_ERROR 0x00
-#define IPMI_NODE_BUSY_ERR 0xc0
-#define IPMI_INVALID_COMMAND_ERR 0xc1
-#define IPMI_TIMEOUT_ERR 0xc3
-#define IPMI_ERR_MSG_TRUNCATED 0xc6
-#define IPMI_REQ_LEN_INVALID_ERR 0xc7
-#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8
-#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */
-#define IPMI_LOST_ARBITRATION_ERR 0x81
-#define IPMI_BUS_ERR 0x82
-#define IPMI_NAK_ON_WRITE_ERR 0x83
-#define IPMI_ERR_UNSPECIFIED 0xff
-
-#define IPMI_CHANNEL_PROTOCOL_IPMB 1
-#define IPMI_CHANNEL_PROTOCOL_ICMB 2
-#define IPMI_CHANNEL_PROTOCOL_SMBUS 4
-#define IPMI_CHANNEL_PROTOCOL_KCS 5
-#define IPMI_CHANNEL_PROTOCOL_SMIC 6
-#define IPMI_CHANNEL_PROTOCOL_BT10 7
-#define IPMI_CHANNEL_PROTOCOL_BT15 8
-#define IPMI_CHANNEL_PROTOCOL_TMODE 9
-
-#define IPMI_CHANNEL_MEDIUM_IPMB 1
-#define IPMI_CHANNEL_MEDIUM_ICMB10 2
-#define IPMI_CHANNEL_MEDIUM_ICMB09 3
-#define IPMI_CHANNEL_MEDIUM_8023LAN 4
-#define IPMI_CHANNEL_MEDIUM_ASYNC 5
-#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6
-#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7
-#define IPMI_CHANNEL_MEDIUM_SMBUS1 8
-#define IPMI_CHANNEL_MEDIUM_SMBUS2 9
-#define IPMI_CHANNEL_MEDIUM_USB1 10
-#define IPMI_CHANNEL_MEDIUM_USB2 11
-#define IPMI_CHANNEL_MEDIUM_SYSINTF 12
-#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60
-#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
-
-#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/ipsec.h b/include/linux/ipsec.h
deleted file mode 100644
index d17a630..0000000
--- a/include/linux/ipsec.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _LINUX_IPSEC_H
-#define _LINUX_IPSEC_H
-
-/* The definitions, required to talk to KAME racoon IKE. */
-
-#include <linux/pfkeyv2.h>
-
-#define IPSEC_PORT_ANY 0
-#define IPSEC_ULPROTO_ANY 255
-#define IPSEC_PROTO_ANY 255
-
-enum {
- IPSEC_MODE_ANY = 0, /* We do not support this for SA */
- IPSEC_MODE_TRANSPORT = 1,
- IPSEC_MODE_TUNNEL = 2,
- IPSEC_MODE_BEET = 3
-};
-
-enum {
- IPSEC_DIR_ANY = 0,
- IPSEC_DIR_INBOUND = 1,
- IPSEC_DIR_OUTBOUND = 2,
- IPSEC_DIR_FWD = 3, /* It is our own */
- IPSEC_DIR_MAX = 4,
- IPSEC_DIR_INVALID = 5
-};
-
-enum {
- IPSEC_POLICY_DISCARD = 0,
- IPSEC_POLICY_NONE = 1,
- IPSEC_POLICY_IPSEC = 2,
- IPSEC_POLICY_ENTRUST = 3,
- IPSEC_POLICY_BYPASS = 4
-};
-
-enum {
- IPSEC_LEVEL_DEFAULT = 0,
- IPSEC_LEVEL_USE = 1,
- IPSEC_LEVEL_REQUIRE = 2,
- IPSEC_LEVEL_UNIQUE = 3
-};
-
-#define IPSEC_MANUAL_REQID_MAX 0x3fff
-
-#define IPSEC_REPLAYWSIZE 32
-
-#endif /* _LINUX_IPSEC_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b94e91..bcba48a 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,134 +1,9 @@
#ifndef _IPV6_H
#define _IPV6_H
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/ipv6.h>
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU 1280
-
-/*
- * Advanced API
- * source interface/address selection, source routing, etc...
- * *under construction*
- */
-
-
-struct in6_pktinfo {
- struct in6_addr ipi6_addr;
- int ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
- struct sockaddr_in6 ip6m_addr;
- __u32 ip6m_mtu;
-};
-
-struct in6_ifreq {
- struct in6_addr ifr6_addr;
- __u32 ifr6_prefixlen;
- int ifr6_ifindex;
-};
-
-#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
-
-/*
- * routing header
- */
-struct ipv6_rt_hdr {
- __u8 nexthdr;
- __u8 hdrlen;
- __u8 type;
- __u8 segments_left;
-
- /*
- * type specific data
- * variable length field
- */
-};
-
-
-struct ipv6_opt_hdr {
- __u8 nexthdr;
- __u8 hdrlen;
- /*
- * TLV encoded option data follows.
- */
-} __attribute__((packed)); /* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr ipv6_opt_hdr
-
-#ifdef __KERNEL__
#define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- * routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
- struct ipv6_rt_hdr rt_hdr;
- __u32 reserved;
- struct in6_addr addr[0];
-
-#define rt0_type rt_hdr.type
-};
-
-/*
- * routing header type 2
- */
-
-struct rt2_hdr {
- struct ipv6_rt_hdr rt_hdr;
- __u32 reserved;
- struct in6_addr addr;
-
-#define rt2_type rt_hdr.type
-};
-
-/*
- * home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
- __u8 type;
- __u8 length;
- struct in6_addr addr;
-} __attribute__((packed));
-
-/*
- * IPv6 fixed header
- *
- * BEWARE, it is incorrect. The first 4 bits of flow_lbl
- * are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 priority:4,
- version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 version:4,
- priority:4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 flow_lbl[3];
-
- __be16 payload_len;
- __u8 nexthdr;
- __u8 hop_limit;
-
- struct in6_addr saddr;
- struct in6_addr daddr;
-};
-
-#ifdef __KERNEL__
/*
* This structure contains configuration options per IPv6 link.
*/
@@ -180,43 +55,6 @@ struct ipv6_params {
__s32 autoconf;
};
extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
- DEVCONF_FORWARDING = 0,
- DEVCONF_HOPLIMIT,
- DEVCONF_MTU6,
- DEVCONF_ACCEPT_RA,
- DEVCONF_ACCEPT_REDIRECTS,
- DEVCONF_AUTOCONF,
- DEVCONF_DAD_TRANSMITS,
- DEVCONF_RTR_SOLICITS,
- DEVCONF_RTR_SOLICIT_INTERVAL,
- DEVCONF_RTR_SOLICIT_DELAY,
- DEVCONF_USE_TEMPADDR,
- DEVCONF_TEMP_VALID_LFT,
- DEVCONF_TEMP_PREFERED_LFT,
- DEVCONF_REGEN_MAX_RETRY,
- DEVCONF_MAX_DESYNC_FACTOR,
- DEVCONF_MAX_ADDRESSES,
- DEVCONF_FORCE_MLD_VERSION,
- DEVCONF_ACCEPT_RA_DEFRTR,
- DEVCONF_ACCEPT_RA_PINFO,
- DEVCONF_ACCEPT_RA_RTR_PREF,
- DEVCONF_RTR_PROBE_INTERVAL,
- DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
- DEVCONF_PROXY_NDP,
- DEVCONF_OPTIMISTIC_DAD,
- DEVCONF_ACCEPT_SOURCE_ROUTE,
- DEVCONF_MC_FORWARDING,
- DEVCONF_DISABLE_IPV6,
- DEVCONF_ACCEPT_DAD,
- DEVCONF_FORCE_TLLAO,
- DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
#include <linux/icmpv6.h>
#include <linux/tcp.h>
#include <linux/udp.h>
@@ -541,6 +379,4 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk)
(ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
(!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
-#endif /* __KERNEL__ */
-
#endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index 1e7d8af..25b5f1f 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -9,54 +9,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IPV6_ROUTE_H
#define _LINUX_IPV6_ROUTE_H
-#include <linux/types.h>
-
-#define RTF_DEFAULT 0x00010000 /* default - learned via ND */
-#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed)
- fallback, no routers on link */
-#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */
-#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */
-#define RTF_ANYCAST 0x00100000 /* Anycast */
-
-#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */
-#define RTF_EXPIRES 0x00400000
-
-#define RTF_ROUTEINFO 0x00800000 /* route information - RA */
-
-#define RTF_CACHE 0x01000000 /* cache entry */
-#define RTF_FLOW 0x02000000 /* flow significant route */
-#define RTF_POLICY 0x04000000 /* policy route */
-
-#define RTF_PREF(pref) ((pref) << 27)
-#define RTF_PREF_MASK 0x18000000
+#include <uapi/linux/ipv6_route.h>
-#define RTF_LOCAL 0x80000000
-
-#ifdef __KERNEL__
#define IPV6_EXTRACT_PREF(flag) (((flag) & RTF_PREF_MASK) >> 27)
#define IPV6_DECODE_PREF(pref) ((pref) ^ 2) /* 1:low,2:med,3:high */
#endif
-
-struct in6_rtmsg {
- struct in6_addr rtmsg_dst;
- struct in6_addr rtmsg_src;
- struct in6_addr rtmsg_gateway;
- __u32 rtmsg_type;
- __u16 rtmsg_dst_len;
- __u16 rtmsg_src_len;
- __u32 rtmsg_metric;
- unsigned long rtmsg_info;
- __u32 rtmsg_flags;
- int rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE 0x11
-#define RTMSG_DELDEVICE 0x12
-#define RTMSG_NEWROUTE 0x21
-#define RTMSG_DELROUTE 0x22
-
-#endif
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
deleted file mode 100644
index 3d48014..0000000
--- a/include/linux/ipx.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _IPX_H_
-#define _IPX_H_
-#include <linux/types.h>
-#include <linux/sockios.h>
-#include <linux/socket.h>
-#define IPX_NODE_LEN 6
-#define IPX_MTU 576
-
-struct sockaddr_ipx {
- __kernel_sa_family_t sipx_family;
- __be16 sipx_port;
- __be32 sipx_network;
- unsigned char sipx_node[IPX_NODE_LEN];
- __u8 sipx_type;
- unsigned char sipx_zero; /* 16 byte fill */
-};
-
-/*
- * So we can fit the extra info for SIOCSIFADDR into the address nicely
- */
-#define sipx_special sipx_port
-#define sipx_action sipx_zero
-#define IPX_DLTITF 0
-#define IPX_CRTITF 1
-
-struct ipx_route_definition {
- __be32 ipx_network;
- __be32 ipx_router_network;
- unsigned char ipx_router_node[IPX_NODE_LEN];
-};
-
-struct ipx_interface_definition {
- __be32 ipx_network;
- unsigned char ipx_device[16];
- unsigned char ipx_dlink_type;
-#define IPX_FRAME_NONE 0
-#define IPX_FRAME_SNAP 1
-#define IPX_FRAME_8022 2
-#define IPX_FRAME_ETHERII 3
-#define IPX_FRAME_8023 4
-#define IPX_FRAME_TR_8022 5 /* obsolete */
- unsigned char ipx_special;
-#define IPX_SPECIAL_NONE 0
-#define IPX_PRIMARY 1
-#define IPX_INTERNAL 2
- unsigned char ipx_node[IPX_NODE_LEN];
-};
-
-struct ipx_config_data {
- unsigned char ipxcfg_auto_select_primary;
- unsigned char ipxcfg_auto_create_interfaces;
-};
-
-/*
- * OLD Route Definition for backward compatibility.
- */
-
-struct ipx_route_def {
- __be32 ipx_network;
- __be32 ipx_router_network;
-#define IPX_ROUTE_NO_ROUTER 0
- unsigned char ipx_router_node[IPX_NODE_LEN];
- unsigned char ipx_device[16];
- unsigned short ipx_flags;
-#define IPX_RT_SNAP 8
-#define IPX_RT_8022 4
-#define IPX_RT_BLUEBOOK 2
-#define IPX_RT_ROUTED 1
-};
-
-#define SIOCAIPXITFCRT (SIOCPROTOPRIVATE)
-#define SIOCAIPXPRISLT (SIOCPROTOPRIVATE + 1)
-#define SIOCIPXCFGDATA (SIOCPROTOPRIVATE + 2)
-#define SIOCIPXNCPCONN (SIOCPROTOPRIVATE + 3)
-#endif /* _IPX_H_ */
diff --git a/include/linux/irda.h b/include/linux/irda.h
deleted file mode 100644
index a014c32..0000000
--- a/include/linux/irda.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*********************************************************************
- *
- * Filename: irda.h
- * Version:
- * Description:
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Mon Mar 8 14:06:12 1999
- * Modified at: Sat Dec 25 16:06:42 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#ifndef KERNEL_IRDA_H
-#define KERNEL_IRDA_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Note that this file is shared with user space. */
-
-/* Hint bit positions for first hint byte */
-#define HINT_PNP 0x01
-#define HINT_PDA 0x02
-#define HINT_COMPUTER 0x04
-#define HINT_PRINTER 0x08
-#define HINT_MODEM 0x10
-#define HINT_FAX 0x20
-#define HINT_LAN 0x40
-#define HINT_EXTENSION 0x80
-
-/* Hint bit positions for second hint byte (first extension byte) */
-#define HINT_TELEPHONY 0x01
-#define HINT_FILE_SERVER 0x02
-#define HINT_COMM 0x04
-#define HINT_MESSAGE 0x08
-#define HINT_HTTP 0x10
-#define HINT_OBEX 0x20
-
-/* IrLMP character code values */
-#define CS_ASCII 0x00
-#define CS_ISO_8859_1 0x01
-#define CS_ISO_8859_2 0x02
-#define CS_ISO_8859_3 0x03
-#define CS_ISO_8859_4 0x04
-#define CS_ISO_8859_5 0x05
-#define CS_ISO_8859_6 0x06
-#define CS_ISO_8859_7 0x07
-#define CS_ISO_8859_8 0x08
-#define CS_ISO_8859_9 0x09
-#define CS_UNICODE 0xff
-
-/* These are the currently known dongles */
-typedef enum {
- IRDA_TEKRAM_DONGLE = 0,
- IRDA_ESI_DONGLE = 1,
- IRDA_ACTISYS_DONGLE = 2,
- IRDA_ACTISYS_PLUS_DONGLE = 3,
- IRDA_GIRBIL_DONGLE = 4,
- IRDA_LITELINK_DONGLE = 5,
- IRDA_AIRPORT_DONGLE = 6,
- IRDA_OLD_BELKIN_DONGLE = 7,
- IRDA_EP7211_IR = 8,
- IRDA_MCP2120_DONGLE = 9,
- IRDA_ACT200L_DONGLE = 10,
- IRDA_MA600_DONGLE = 11,
- IRDA_TOIM3232_DONGLE = 12,
- IRDA_EP7211_DONGLE = 13,
-} IRDA_DONGLE;
-
-/* Protocol types to be used for SOCK_DGRAM */
-enum {
- IRDAPROTO_UNITDATA = 0,
- IRDAPROTO_ULTRA = 1,
- IRDAPROTO_MAX
-};
-
-#define SOL_IRLMP 266 /* Same as SOL_IRDA for now */
-#define SOL_IRTTP 266 /* Same as SOL_IRDA for now */
-
-#define IRLMP_ENUMDEVICES 1 /* Return discovery log */
-#define IRLMP_IAS_SET 2 /* Set an attribute in local IAS */
-#define IRLMP_IAS_QUERY 3 /* Query remote IAS for attribute */
-#define IRLMP_HINTS_SET 4 /* Set hint bits advertised */
-#define IRLMP_QOS_SET 5
-#define IRLMP_QOS_GET 6
-#define IRLMP_MAX_SDU_SIZE 7
-#define IRLMP_IAS_GET 8 /* Get an attribute from local IAS */
-#define IRLMP_IAS_DEL 9 /* Remove attribute from local IAS */
-#define IRLMP_HINT_MASK_SET 10 /* Set discovery filter */
-#define IRLMP_WAITDEVICE 11 /* Wait for a new discovery */
-
-#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
-
-#define IAS_MAX_STRING 256 /* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_OCTET_STRING 1024 /* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_CLASSNAME 60 /* See IrLMP 1.1, 4.3.1 */
-#define IAS_MAX_ATTRIBNAME 60 /* See IrLMP 1.1, 4.3.3.1 */
-#define IAS_MAX_ATTRIBNUMBER 256 /* See IrLMP 1.1, 4.3.3.1 */
-/* For user space backward compatibility - may be fixed in kernel 2.5.X
- * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
-#define IAS_EXPORT_CLASSNAME 64
-#define IAS_EXPORT_ATTRIBNAME 256
-
-/* Attribute type needed for struct irda_ias_set */
-#define IAS_MISSING 0
-#define IAS_INTEGER 1
-#define IAS_OCT_SEQ 2
-#define IAS_STRING 3
-
-#define LSAP_ANY 0xff
-
-struct sockaddr_irda {
- __kernel_sa_family_t sir_family; /* AF_IRDA */
- __u8 sir_lsap_sel; /* LSAP selector */
- __u32 sir_addr; /* Device address */
- char sir_name[25]; /* Usually <service>:IrDA:TinyTP */
-};
-
-struct irda_device_info {
- __u32 saddr; /* Address of local interface */
- __u32 daddr; /* Address of remote device */
- char info[22]; /* Description */
- __u8 charset; /* Charset used for description */
- __u8 hints[2]; /* Hint bits */
-};
-
-struct irda_device_list {
- __u32 len;
- struct irda_device_info dev[1];
-};
-
-struct irda_ias_set {
- char irda_class_name[IAS_EXPORT_CLASSNAME];
- char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
- unsigned int irda_attrib_type;
- union {
- unsigned int irda_attrib_int;
- struct {
- unsigned short len;
- __u8 octet_seq[IAS_MAX_OCTET_STRING];
- } irda_attrib_octet_seq;
- struct {
- __u8 len;
- __u8 charset;
- __u8 string[IAS_MAX_STRING];
- } irda_attrib_string;
- } attribute;
- __u32 daddr; /* Address of device (for some queries only) */
-};
-
-/* Some private IOCTL's (max 16) */
-#define SIOCSDONGLE (SIOCDEVPRIVATE + 0)
-#define SIOCGDONGLE (SIOCDEVPRIVATE + 1)
-#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
-#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
-#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
-#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
-#define SIOCSMODE (SIOCDEVPRIVATE + 6)
-#define SIOCGMODE (SIOCDEVPRIVATE + 7)
-#define SIOCSDTRRTS (SIOCDEVPRIVATE + 8)
-#define SIOCGQOS (SIOCDEVPRIVATE + 9)
-
-/* No reason to include <linux/if.h> just because of this one ;-) */
-#define IRNAMSIZ 16
-
-/* IrDA quality of service information (must not exceed 16 bytes) */
-struct if_irda_qos {
- unsigned long baudrate;
- unsigned short data_size;
- unsigned short window_size;
- unsigned short min_turn_time;
- unsigned short max_turn_time;
- unsigned char add_bofs;
- unsigned char link_disc;
-};
-
-/* For setting RTS and DTR lines of a dongle */
-struct if_irda_line {
- __u8 dtr;
- __u8 rts;
-};
-
-/* IrDA interface configuration (data part must not exceed 16 bytes) */
-struct if_irda_req {
- union {
- char ifrn_name[IRNAMSIZ]; /* if name, e.g. "irda0" */
- } ifr_ifrn;
-
- /* Data part */
- union {
- struct if_irda_line ifru_line;
- struct if_irda_qos ifru_qos;
- unsigned short ifru_flags;
- unsigned int ifru_receiving;
- unsigned int ifru_mode;
- unsigned int ifru_dongle;
- } ifr_ifru;
-};
-
-#define ifr_baudrate ifr_ifru.ifru_qos.baudrate
-#define ifr_receiving ifr_ifru.ifru_receiving
-#define ifr_dongle ifr_ifru.ifru_dongle
-#define ifr_mode ifr_ifru.ifru_mode
-#define ifr_dtr ifr_ifru.ifru_line.dtr
-#define ifr_rts ifr_ifru.ifru_line.rts
-
-
-/* IrDA netlink definitions */
-#define IRDA_NL_NAME "irda"
-#define IRDA_NL_VERSION 1
-
-enum irda_nl_commands {
- IRDA_NL_CMD_UNSPEC,
- IRDA_NL_CMD_SET_MODE,
- IRDA_NL_CMD_GET_MODE,
-
- __IRDA_NL_CMD_AFTER_LAST
-};
-#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
-
-enum nl80211_attrs {
- IRDA_NL_ATTR_UNSPEC,
- IRDA_NL_ATTR_IFNAME,
- IRDA_NL_ATTR_MODE,
-
- __IRDA_NL_ATTR_AFTER_LAST
-};
-#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
-
-/* IrDA modes */
-#define IRDA_MODE_PRIMARY 0x1
-#define IRDA_MODE_SECONDARY 0x2
-#define IRDA_MODE_MONITOR 0x4
-
-#endif /* KERNEL_IRDA_H */
-
-
-
-
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3bc4dca..0a2dc46 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -1,10 +1,8 @@
#ifndef _LINUX_IRQNR_H
#define _LINUX_IRQNR_H
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
+#include <uapi/linux/irqnr.h>
+
#ifndef CONFIG_GENERIC_HARDIRQS
#include <asm/irq.h>
@@ -57,6 +55,4 @@ unsigned int irq_get_next_irq(unsigned int offset);
#define for_each_irq_nr(irq) \
for (irq = 0; irq < nr_irqs; irq++)
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 215c416..1e9a0f2 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -10,136 +10,9 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef __ISDN_H__
#define __ISDN_H__
-#include <linux/ioctl.h>
-#include <linux/tty.h>
-
-#define ISDN_MAX_DRIVERS 32
-#define ISDN_MAX_CHANNELS 64
-
-/* New ioctl-codes */
-#define IIOCNETAIF _IO('I',1)
-#define IIOCNETDIF _IO('I',2)
-#define IIOCNETSCF _IO('I',3)
-#define IIOCNETGCF _IO('I',4)
-#define IIOCNETANM _IO('I',5)
-#define IIOCNETDNM _IO('I',6)
-#define IIOCNETGNM _IO('I',7)
-#define IIOCGETSET _IO('I',8) /* no longer supported */
-#define IIOCSETSET _IO('I',9) /* no longer supported */
-#define IIOCSETVER _IO('I',10)
-#define IIOCNETHUP _IO('I',11)
-#define IIOCSETGST _IO('I',12)
-#define IIOCSETBRJ _IO('I',13)
-#define IIOCSIGPRF _IO('I',14)
-#define IIOCGETPRF _IO('I',15)
-#define IIOCSETPRF _IO('I',16)
-#define IIOCGETMAP _IO('I',17)
-#define IIOCSETMAP _IO('I',18)
-#define IIOCNETASL _IO('I',19)
-#define IIOCNETDIL _IO('I',20)
-#define IIOCGETCPS _IO('I',21)
-#define IIOCGETDVR _IO('I',22)
-#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN _IO('I',32)
-#define IIOCNETDLN _IO('I',33)
-
-#define IIOCNETGPN _IO('I',34)
-
-#define IIOCDBGVAR _IO('I',127)
-
-#define IIOCDRVCTL _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER 0
-#define ISDN_NET_ENCAP_RAWIP 1
-#define ISDN_NET_ENCAP_IPTYP 2
-#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP 4
-#define ISDN_NET_ENCAP_UIHDLC 5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
-#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE 0
-#define ISDN_USAGE_RAW 1
-#define ISDN_USAGE_MODEM 2
-#define ISDN_USAGE_NET 3
-#define ISDN_USAGE_VOICE 4
-#define ISDN_USAGE_FAX 5
-#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */
-
-#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */
-#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN 32
-#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */
-#define TTY_DV 0x06 /* Data version for iprofd etc. */
-
-#define INF_DV 0x01 /* Data version for /dev/isdninfo */
-
-typedef struct {
- char drvid[25];
- unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
- char name[10];
- char phone[ISDN_MSNLEN];
- int outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
- char name[10]; /* Name of interface */
- char master[10]; /* Name of Master for Bundling */
- char slave[10]; /* Name of Slave for Bundling */
- char eaz[256]; /* EAZ/MSN */
- char drvid[25]; /* DriverId for Bindings */
- int onhtime; /* Hangup-Timeout */
- int charge; /* Charge-Units */
- int l2_proto; /* Layer-2 protocol */
- int l3_proto; /* Layer-3 protocol */
- int p_encap; /* Encapsulation */
- int exclusive; /* Channel, if bound exclusive */
- int dialmax; /* Dial Retry-Counter */
- int slavedelay; /* Delay until slave starts up */
- int cbdelay; /* Delay before Callback */
- int chargehup; /* Flag: Charge-Hangup */
- int ihup; /* Flag: Hangup-Timeout on incoming line */
- int secure; /* Flag: Secure */
- int callback; /* Flag: Callback */
- int cbhup; /* Flag: Reject Call before Callback */
- int pppbind; /* ippp device for bindings */
- int chargeint; /* Use fixed charge interval length */
- int triggercps; /* BogoCPS needed for triggering slave */
- int dialtimeout; /* Dial-Timeout */
- int dialwait; /* Time to wait after failed dial */
- int dialmode; /* Flag: off / on / auto */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */
-#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */
-#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */
-#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
#include <linux/errno.h>
#include <linux/fs.h>
@@ -163,6 +36,7 @@ typedef struct {
#include <linux/skbuff.h>
#include <linux/tcp.h>
#include <linux/mutex.h>
+#include <uapi/linux/isdn.h>
#define ISDN_TTY_MAJOR 43
#define ISDN_TTYAUX_MAJOR 44
@@ -595,6 +469,4 @@ typedef struct isdn_devt {
extern isdn_dev *dev;
-#endif /* __KERNEL__ */
-
#endif /* __ISDN_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
index a5a50f5..19ab361 100644
--- a/include/linux/isdn_divertif.h
+++ b/include/linux/isdn_divertif.h
@@ -9,26 +9,12 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef _LINUX_ISDN_DIVERTIF_H
#define _LINUX_ISDN_DIVERTIF_H
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG 0x00 /* register command */
-#define DIVERT_CMD_REL 0x01 /* release command */
-#define DIVERT_NO_ERR 0x00 /* return value no error */
-#define DIVERT_CMD_ERR 0x01 /* invalid cmd */
-#define DIVERT_VER_ERR 0x02 /* magic/version invalid */
-#define DIVERT_REG_ERR 0x03 /* module already registered */
-#define DIVERT_REL_ERR 0x04 /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
#include <linux/isdnif.h>
#include <linux/types.h>
+#include <uapi/linux/isdn_divertif.h>
/***************************************************************/
/* structure exchanging data between isdn hl and divert module */
@@ -46,6 +32,4 @@ typedef struct
/* function register */
/*********************/
extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
#endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
index 8687a7d..d5f62bc 100644
--- a/include/linux/isdn_ppp.h
+++ b/include/linux/isdn_ppp.h
@@ -9,68 +9,16 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef _LINUX_ISDN_PPP_H
#define _LINUX_ISDN_PPP_H
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION "2.2.0"
-
-struct pppcallinfo
-{
- int calltype;
- unsigned char local_num[64];
- unsigned char remote_num[64];
- int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU _IOW('t',132,int)
-#define PPPIOCSMPMRU _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT 0x00000200
-#define SC_REJ_MP_PROT 0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ 0x00004000
-
-#define SC_DECOMP_ON 0x01
-#define SC_COMP_ON 0x02
-#define SC_DECOMP_DISCARD 0x04
-#define SC_COMP_DISCARD 0x08
-#define SC_LINK_DECOMP_ON 0x10
-#define SC_LINK_COMP_ON 0x20
-#define SC_LINK_DECOMP_DISCARD 0x40
-#define SC_LINK_COMP_DISCARD 0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
- int num;
- unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
- int optlen;
- int flags;
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_IPPP_FILTER
#include <linux/filter.h>
#endif
+#include <uapi/linux/isdn_ppp.h>
#define DECOMP_ERR_NOMEM (-10)
@@ -244,5 +192,4 @@ struct ippp_struct {
unsigned long compflags;
};
-#endif /* __KERNEL__ */
#endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index b8c23f8..0fc6ff2 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -10,51 +10,12 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef __ISDNIF_H__
#define __ISDNIF_H__
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */
-#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */
-#define ISDN_PTYPE_LEASED 3 /* for leased lines */
-#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */
-#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */
-#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */
-#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */
-#define ISDN_PROTO_L2_HDLC 3 /* HDLC */
-#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */
-#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */
-#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */
-#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */
-#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */
-#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */
-#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS 0 /* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
#include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
/***************************************************************************/
/* Extensions made by Werner Cornelius (werner@ikt.de) */
@@ -541,6 +502,4 @@ typedef struct {
extern int register_isdn(isdn_if*);
#include <asm/uaccess.h>
-#endif /* __KERNEL__ */
-
#endif /* __ISDNIF_H__ */
diff --git a/include/linux/iso_fs.h b/include/linux/iso_fs.h
deleted file mode 100644
index 4688ac4..0000000
--- a/include/linux/iso_fs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _ISOFS_FS_H
-#define _ISOFS_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The isofs filesystem constants/structures
- */
-
-/* This part borrowed from the bsd386 isofs */
-#define ISODCL(from, to) (to - from + 1)
-
-struct iso_volume_descriptor {
- char type[ISODCL(1,1)]; /* 711 */
- char id[ISODCL(2,6)];
- char version[ISODCL(7,7)];
- char data[ISODCL(8,2048)];
-};
-
-/* volume descriptor types */
-#define ISO_VD_PRIMARY 1
-#define ISO_VD_SUPPLEMENTARY 2
-#define ISO_VD_END 255
-
-#define ISO_STANDARD_ID "CD001"
-
-struct iso_primary_descriptor {
- char type [ISODCL ( 1, 1)]; /* 711 */
- char id [ISODCL ( 2, 6)];
- char version [ISODCL ( 7, 7)]; /* 711 */
- char unused1 [ISODCL ( 8, 8)];
- char system_id [ISODCL ( 9, 40)]; /* achars */
- char volume_id [ISODCL ( 41, 72)]; /* dchars */
- char unused2 [ISODCL ( 73, 80)];
- char volume_space_size [ISODCL ( 81, 88)]; /* 733 */
- char unused3 [ISODCL ( 89, 120)];
- char volume_set_size [ISODCL (121, 124)]; /* 723 */
- char volume_sequence_number [ISODCL (125, 128)]; /* 723 */
- char logical_block_size [ISODCL (129, 132)]; /* 723 */
- char path_table_size [ISODCL (133, 140)]; /* 733 */
- char type_l_path_table [ISODCL (141, 144)]; /* 731 */
- char opt_type_l_path_table [ISODCL (145, 148)]; /* 731 */
- char type_m_path_table [ISODCL (149, 152)]; /* 732 */
- char opt_type_m_path_table [ISODCL (153, 156)]; /* 732 */
- char root_directory_record [ISODCL (157, 190)]; /* 9.1 */
- char volume_set_id [ISODCL (191, 318)]; /* dchars */
- char publisher_id [ISODCL (319, 446)]; /* achars */
- char preparer_id [ISODCL (447, 574)]; /* achars */
- char application_id [ISODCL (575, 702)]; /* achars */
- char copyright_file_id [ISODCL (703, 739)]; /* 7.5 dchars */
- char abstract_file_id [ISODCL (740, 776)]; /* 7.5 dchars */
- char bibliographic_file_id [ISODCL (777, 813)]; /* 7.5 dchars */
- char creation_date [ISODCL (814, 830)]; /* 8.4.26.1 */
- char modification_date [ISODCL (831, 847)]; /* 8.4.26.1 */
- char expiration_date [ISODCL (848, 864)]; /* 8.4.26.1 */
- char effective_date [ISODCL (865, 881)]; /* 8.4.26.1 */
- char file_structure_version [ISODCL (882, 882)]; /* 711 */
- char unused4 [ISODCL (883, 883)];
- char application_data [ISODCL (884, 1395)];
- char unused5 [ISODCL (1396, 2048)];
-};
-
-/* Almost the same as the primary descriptor but two fields are specified */
-struct iso_supplementary_descriptor {
- char type [ISODCL ( 1, 1)]; /* 711 */
- char id [ISODCL ( 2, 6)];
- char version [ISODCL ( 7, 7)]; /* 711 */
- char flags [ISODCL ( 8, 8)]; /* 853 */
- char system_id [ISODCL ( 9, 40)]; /* achars */
- char volume_id [ISODCL ( 41, 72)]; /* dchars */
- char unused2 [ISODCL ( 73, 80)];
- char volume_space_size [ISODCL ( 81, 88)]; /* 733 */
- char escape [ISODCL ( 89, 120)]; /* 856 */
- char volume_set_size [ISODCL (121, 124)]; /* 723 */
- char volume_sequence_number [ISODCL (125, 128)]; /* 723 */
- char logical_block_size [ISODCL (129, 132)]; /* 723 */
- char path_table_size [ISODCL (133, 140)]; /* 733 */
- char type_l_path_table [ISODCL (141, 144)]; /* 731 */
- char opt_type_l_path_table [ISODCL (145, 148)]; /* 731 */
- char type_m_path_table [ISODCL (149, 152)]; /* 732 */
- char opt_type_m_path_table [ISODCL (153, 156)]; /* 732 */
- char root_directory_record [ISODCL (157, 190)]; /* 9.1 */
- char volume_set_id [ISODCL (191, 318)]; /* dchars */
- char publisher_id [ISODCL (319, 446)]; /* achars */
- char preparer_id [ISODCL (447, 574)]; /* achars */
- char application_id [ISODCL (575, 702)]; /* achars */
- char copyright_file_id [ISODCL (703, 739)]; /* 7.5 dchars */
- char abstract_file_id [ISODCL (740, 776)]; /* 7.5 dchars */
- char bibliographic_file_id [ISODCL (777, 813)]; /* 7.5 dchars */
- char creation_date [ISODCL (814, 830)]; /* 8.4.26.1 */
- char modification_date [ISODCL (831, 847)]; /* 8.4.26.1 */
- char expiration_date [ISODCL (848, 864)]; /* 8.4.26.1 */
- char effective_date [ISODCL (865, 881)]; /* 8.4.26.1 */
- char file_structure_version [ISODCL (882, 882)]; /* 711 */
- char unused4 [ISODCL (883, 883)];
- char application_data [ISODCL (884, 1395)];
- char unused5 [ISODCL (1396, 2048)];
-};
-
-
-#define HS_STANDARD_ID "CDROM"
-
-struct hs_volume_descriptor {
- char foo [ISODCL ( 1, 8)]; /* 733 */
- char type [ISODCL ( 9, 9)]; /* 711 */
- char id [ISODCL ( 10, 14)];
- char version [ISODCL ( 15, 15)]; /* 711 */
- char data[ISODCL(16,2048)];
-};
-
-
-struct hs_primary_descriptor {
- char foo [ISODCL ( 1, 8)]; /* 733 */
- char type [ISODCL ( 9, 9)]; /* 711 */
- char id [ISODCL ( 10, 14)];
- char version [ISODCL ( 15, 15)]; /* 711 */
- char unused1 [ISODCL ( 16, 16)]; /* 711 */
- char system_id [ISODCL ( 17, 48)]; /* achars */
- char volume_id [ISODCL ( 49, 80)]; /* dchars */
- char unused2 [ISODCL ( 81, 88)]; /* 733 */
- char volume_space_size [ISODCL ( 89, 96)]; /* 733 */
- char unused3 [ISODCL ( 97, 128)]; /* 733 */
- char volume_set_size [ISODCL (129, 132)]; /* 723 */
- char volume_sequence_number [ISODCL (133, 136)]; /* 723 */
- char logical_block_size [ISODCL (137, 140)]; /* 723 */
- char path_table_size [ISODCL (141, 148)]; /* 733 */
- char type_l_path_table [ISODCL (149, 152)]; /* 731 */
- char unused4 [ISODCL (153, 180)]; /* 733 */
- char root_directory_record [ISODCL (181, 214)]; /* 9.1 */
-};
-
-/* We use this to help us look up the parent inode numbers. */
-
-struct iso_path_table{
- unsigned char name_len[2]; /* 721 */
- char extent[4]; /* 731 */
- char parent[2]; /* 721 */
- char name[0];
-} __attribute__((packed));
-
-/* high sierra is identical to iso, except that the date is only 6 bytes, and
- there is an extra reserved byte after the flags */
-
-struct iso_directory_record {
- char length [ISODCL (1, 1)]; /* 711 */
- char ext_attr_length [ISODCL (2, 2)]; /* 711 */
- char extent [ISODCL (3, 10)]; /* 733 */
- char size [ISODCL (11, 18)]; /* 733 */
- char date [ISODCL (19, 25)]; /* 7 by 711 */
- char flags [ISODCL (26, 26)];
- char file_unit_size [ISODCL (27, 27)]; /* 711 */
- char interleave [ISODCL (28, 28)]; /* 711 */
- char volume_sequence_number [ISODCL (29, 32)]; /* 723 */
- unsigned char name_len [ISODCL (33, 33)]; /* 711 */
- char name [0];
-} __attribute__((packed));
-
-#define ISOFS_BLOCK_BITS 11
-#define ISOFS_BLOCK_SIZE 2048
-
-#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
-#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
-
-#endif /* _ISOFS_FS_H */
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
deleted file mode 100644
index 42bf725..0000000
--- a/include/linux/ivtv.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- Public ivtv API header
- Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
- Copyright (C) 2004-2007 Hans Verkuil <hverkuil@xs4all.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_IVTV_H__
-#define __LINUX_IVTV_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/* ivtv knows several distinct output modes: MPEG streaming,
- YUV streaming, YUV updates through user DMA and the passthrough
- mode.
-
- In order to clearly tell the driver that we are in user DMA
- YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
- first (althrough if you don't then the first time
- DMA_FRAME is called the mode switch is done automatically).
-
- When you close the file handle the user DMA mode is exited again.
-
- While in one mode, you cannot use another mode (EBUSY is returned).
-
- All this means that if you want to change the YUV interlacing
- for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
- with y_source == NULL before you can set the correct format using
- VIDIOC_S_FMT.
-
- Eventually all this should be replaced with a proper V4L2 API,
- but for now we have to do it this way. */
-
-struct ivtv_dma_frame {
- enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
- __u32 pixelformat; /* 0 == same as destination */
- void __user *y_source; /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
- then just switch to user DMA YUV output mode */
- void __user *uv_source; /* Unused for RGB pixelformats */
- struct v4l2_rect src;
- struct v4l2_rect dst;
- __u32 src_width;
- __u32 src_height;
-};
-
-#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
-
-/* Select the passthrough mode (if the argument is non-zero). In the passthrough
- mode the output of the encoder is passed immediately into the decoder. */
-#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
-
-/* Deprecated defines: applications should use the defines from videodev2.h */
-#define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B
-#define IVTV_SLICED_TYPE_CAPTION_525 V4L2_MPEG_VBI_IVTV_CAPTION_525
-#define IVTV_SLICED_TYPE_WSS_625 V4L2_MPEG_VBI_IVTV_WSS_625
-#define IVTV_SLICED_TYPE_VPS V4L2_MPEG_VBI_IVTV_VPS
-
-#endif /* _LINUX_IVTV_H */
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
deleted file mode 100644
index e8b92f6..0000000
--- a/include/linux/ivtvfb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- On Screen Display cx23415 Framebuffer driver
-
- Copyright (C) 2006, 2007 Ian Armstrong <ian@iarmst.demon.co.uk>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_IVTVFB_H__
-#define __LINUX_IVTVFB_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Framebuffer external API */
-
-struct ivtvfb_dma_frame {
- void __user *source;
- unsigned long dest_offset;
- int count;
-};
-
-#define IVTVFB_IOC_DMA_FRAME _IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
-
-#endif
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
deleted file mode 100644
index 94ab5e9..0000000
--- a/include/linux/ixjuser.h
+++ /dev/null
@@ -1,720 +0,0 @@
-#ifndef __LINUX_IXJUSER_H
-#define __LINUX_IXJUSER_H
-
-/******************************************************************************
- *
- * ixjuser.h
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Author: Ed Okerson, <eokerson@quicknet.net>
- *
- * Contributors: Greg Herlein, <gherlein@quicknet.net>
- * David W. Erhart, <derhart@quicknet.net>
- * John Sellers, <jsellers@quicknet.net>
- * Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website: http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#include <linux/telephony.h>
-
-
-/******************************************************************************
-*
-* IOCTL's used for the Quicknet Telephony Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before further use.
-*
-******************************************************************************/
-
-#define IXJCTL_DSP_RESET _IO ('q', 0xC0)
-
-#define IXJCTL_RING PHONE_RING
-#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE
-#define IXJCTL_MAXRINGS PHONE_MAXRINGS
-#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE
-#define IXJCTL_RING_START PHONE_RING_START
-#define IXJCTL_RING_STOP PHONE_RING_STOP
-
-#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int)
-#define IXJCTL_SERIAL _IOR ('q', 0xC2, int)
-#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int)
-#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int)
-#define IXJCTL_VERSION _IOR ('q', 0xDA, char *)
-#define IXJCTL_DSP_IDLE _IO ('q', 0xC5)
-#define IXJCTL_TESTRAM _IO ('q', 0xC6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss. The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur. The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC PHONE_REC_CODEC
-#define IXJCTL_REC_START PHONE_REC_START
-#define IXJCTL_REC_STOP PHONE_REC_STOP
-#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH
-#define IXJCTL_FRAME PHONE_FRAME
-#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME
-#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL
-
-typedef enum {
- f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
- f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
- f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
- f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
- f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
- f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
- f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
- f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
- lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-} IXJ_FILTER_FREQ;
-
-typedef struct {
- unsigned int filter;
- IXJ_FILTER_FREQ freq;
- char enable;
-} IXJ_FILTER;
-
-typedef struct {
- char enable;
- char en_filter;
- unsigned int filter;
- unsigned int on1;
- unsigned int off1;
- unsigned int on2;
- unsigned int off2;
- unsigned int on3;
- unsigned int off3;
-} IXJ_FILTER_CADENCE;
-
-#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *)
-#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *)
-#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int)
-#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
-#define IXJCTL_PLAY_CID _IO ('q', 0xD7)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table. The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-* Dial Tone - 25
-* Ring Back - 26
-* Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum {
- hz20 = 0x7ffa,
- hz50 = 0x7fe5,
- hz133 = 0x7f4c,
- hz200 = 0x7e6b,
- hz261 = 0x7d50, /* .63 C1 */
- hz277 = 0x7cfa, /* .18 CS1 */
- hz293 = 0x7c9f, /* .66 D1 */
- hz300 = 0x7c75,
- hz311 = 0x7c32, /* .13 DS1 */
- hz329 = 0x7bbf, /* .63 E1 */
- hz330 = 0x7bb8,
- hz340 = 0x7b75,
- hz349 = 0x7b37, /* .23 F1 */
- hz350 = 0x7b30,
- hz360 = 0x7ae9,
- hz369 = 0x7aa8, /* .99 FS1 */
- hz380 = 0x7a56,
- hz392 = 0x79fa, /* .00 G1 */
- hz400 = 0x79bb,
- hz415 = 0x7941, /* .30 GS1 */
- hz420 = 0x7918,
- hz425 = 0x78ee,
- hz435 = 0x7899,
- hz440 = 0x786d, /* .00 A1 */
- hz445 = 0x7842,
- hz450 = 0x7815,
- hz452 = 0x7803,
- hz466 = 0x7784, /* .16 AS1 */
- hz475 = 0x7731,
- hz480 = 0x7701,
- hz493 = 0x7685, /* .88 B1 */
- hz494 = 0x767b,
- hz500 = 0x7640,
- hz520 = 0x7578,
- hz523 = 0x7559, /* .25 C2 */
- hz525 = 0x7544,
- hz540 = 0x74a7,
- hz554 = 0x7411, /* .37 CS2 */
- hz587 = 0x72a1, /* .33 D2 */
- hz590 = 0x727f,
- hz600 = 0x720b,
- hz620 = 0x711e,
- hz622 = 0x7106, /* .25 DS2 */
- hz659 = 0x6f3b, /* .26 E2 */
- hz660 = 0x6f2e,
- hz698 = 0x6d3d, /* .46 F2 */
- hz700 = 0x6d22,
- hz739 = 0x6b09, /* .99 FS2 */
- hz740 = 0x6afa,
- hz750 = 0x6a6c,
- hz770 = 0x694b,
- hz783 = 0x688b, /* .99 G2 */
- hz800 = 0x678d,
- hz816 = 0x6698,
- hz830 = 0x65bf, /* .61 GS2 */
- hz850 = 0x6484,
- hz857 = 0x6414,
- hz880 = 0x629f, /* .00 A2 */
- hz900 = 0x6154,
- hz932 = 0x5f35, /* .33 AS2 */
- hz935 = 0x5f01,
- hz941 = 0x5e9a,
- hz942 = 0x5e88,
- hz950 = 0x5dfd,
- hz975 = 0x5c44,
- hz1000 = 0x5a81,
- hz1020 = 0x5912,
- hz1050 = 0x56e2,
- hz1100 = 0x5320,
- hz1140 = 0x5007,
- hz1200 = 0x4b3b,
- hz1209 = 0x4a80,
- hz1215 = 0x4a02,
- hz1250 = 0x471c,
- hz1300 = 0x42e0,
- hz1330 = 0x4049,
- hz1336 = 0x3fc4,
- hz1366 = 0x3d22,
- hz1380 = 0x3be4,
- hz1400 = 0x3a1b,
- hz1450 = 0x3596,
- hz1477 = 0x331c,
- hz1500 = 0x30fb,
- hz1600 = 0x278d,
- hz1633 = 0x2462,
- hz1638 = 0x23e7,
- hz1645 = 0x233a,
- hz1750 = 0x18f8,
- hz1800 = 0x1405,
- hz1860 = 0xe0b,
- hz2100 = 0xf5f6,
- hz2130 = 0xf2f5,
- hz2450 = 0xd3b3,
- hz2750 = 0xb8e4
-} IXJ_FREQ;
-
-typedef enum {
- C1 = hz261,
- CS1 = hz277,
- D1 = hz293,
- DS1 = hz311,
- E1 = hz329,
- F1 = hz349,
- FS1 = hz369,
- G1 = hz392,
- GS1 = hz415,
- A1 = hz440,
- AS1 = hz466,
- B1 = hz493,
- C2 = hz523,
- CS2 = hz554,
- D2 = hz587,
- DS2 = hz622,
- E2 = hz659,
- F2 = hz698,
- FS2 = hz739,
- G2 = hz783,
- GS2 = hz830,
- A2 = hz880,
- AS2 = hz932,
-} IXJ_NOTE;
-
-typedef struct {
- int tone_index;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-} IXJ_TONE;
-
-#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT). This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence. The tone_on_time and tone_off time are in
-* 250 microsecond intervals. A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure. The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinitely, or to repeat the entire cadence
-* indefinitely. The ce variable is a pointer to the array of IXJ_TONE
-* structures. If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined. It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexes are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence. If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes. Only one
-* cadence can be played at a time. It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct {
- int index;
- int tone_on_time;
- int tone_off_time;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-} IXJ_CADENCE_ELEMENT;
-
-typedef enum {
- PLAY_ONCE,
- REPEAT_LAST_ELEMENT,
- REPEAT_ALL
-} IXJ_CADENCE_TERM;
-
-typedef struct {
- int elements_used;
- IXJ_CADENCE_TERM termination;
- IXJ_CADENCE_ELEMENT __user *ce;
-} IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC
-#define IXJCTL_PLAY_START PHONE_PLAY_START
-#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP
-#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH
-#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME
-#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar
-* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
-******************************************************************************/
-#define IXJCTL_AEC_START _IOW ('q', 0xCB, int)
-#define IXJCTL_AEC_STOP _IO ('q', 0xCC)
-#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD)
-
-#define AEC_OFF 0
-#define AEC_LOW 1
-#define AEC_MED 2
-#define AEC_HIGH 3
-#define AEC_AUTO 4
-#define AEC_AGC 5
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
-* only. If you pass a 1, DTMF is suppressed from the audio stream.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY PHONE_DTMF_READY
-#define IXJCTL_GET_DTMF PHONE_GET_DTMF
-#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII
-#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB
-#define IXJCTL_EXCEPTION PHONE_EXCEPTION
-#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE
-#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME
-#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME
-#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE
-#define IXJCTL_BUSY PHONE_BUSY
-#define IXJCTL_RINGBACK PHONE_RINGBACK
-#define IXJCTL_DIALTONE PHONE_DIALTONE
-#define IXJCTL_CPT_STOP PHONE_CPT_STOP
-
-/******************************************************************************
-* LineJACK specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJACK
-******************************************************************************/
-
-#define IXJCTL_SET_LED _IOW ('q', 0xCE, int)
-#define IXJCTL_MIXER _IOW ('q', 0xCF, int)
-
-/******************************************************************************
-*
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_MASTER_L 0x0000
-#define MIXER_MASTER_R 0x0100
-#define ATT00DB 0x00
-#define ATT02DB 0x01
-#define ATT04DB 0x02
-#define ATT06DB 0x03
-#define ATT08DB 0x04
-#define ATT10DB 0x05
-#define ATT12DB 0x06
-#define ATT14DB 0x07
-#define ATT16DB 0x08
-#define ATT18DB 0x09
-#define ATT20DB 0x0A
-#define ATT22DB 0x0B
-#define ATT24DB 0x0C
-#define ATT26DB 0x0D
-#define ATT28DB 0x0E
-#define ATT30DB 0x0F
-#define ATT32DB 0x10
-#define ATT34DB 0x11
-#define ATT36DB 0x12
-#define ATT38DB 0x13
-#define ATT40DB 0x14
-#define ATT42DB 0x15
-#define ATT44DB 0x16
-#define ATT46DB 0x17
-#define ATT48DB 0x18
-#define ATT50DB 0x19
-#define ATT52DB 0x1A
-#define ATT54DB 0x1B
-#define ATT56DB 0x1C
-#define ATT58DB 0x1D
-#define ATT60DB 0x1E
-#define ATT62DB 0x1F
-#define MASTER_MUTE 0x80
-
-/******************************************************************************
-*
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_CD_L 0x0600
-#define MIXER_PORT_CD_R 0x0700
-#define MIXER_PORT_LINE_IN_L 0x0800
-#define MIXER_PORT_LINE_IN_R 0x0900
-#define MIXER_PORT_POTS_REC 0x0C00
-#define MIXER_PORT_MIC 0x0E00
-
-#define GAIN12DB 0x00
-#define GAIN10DB 0x01
-#define GAIN08DB 0x02
-#define GAIN06DB 0x03
-#define GAIN04DB 0x04
-#define GAIN02DB 0x05
-#define GAIN00DB 0x06
-#define GAIN_02DB 0x07
-#define GAIN_04DB 0x08
-#define GAIN_06DB 0x09
-#define GAIN_08DB 0x0A
-#define GAIN_10DB 0x0B
-#define GAIN_12DB 0x0C
-#define GAIN_14DB 0x0D
-#define GAIN_16DB 0x0E
-#define GAIN_18DB 0x0F
-#define GAIN_20DB 0x10
-#define GAIN_22DB 0x11
-#define GAIN_24DB 0x12
-#define GAIN_26DB 0x13
-#define GAIN_28DB 0x14
-#define GAIN_30DB 0x15
-#define GAIN_32DB 0x16
-#define GAIN_34DB 0x17
-#define GAIN_36DB 0x18
-#define GAIN_38DB 0x19
-#define GAIN_40DB 0x1A
-#define GAIN_42DB 0x1B
-#define GAIN_44DB 0x1C
-#define GAIN_46DB 0x1D
-#define GAIN_48DB 0x1E
-#define GAIN_50DB 0x1F
-#define INPUT_MUTE 0x80
-
-/******************************************************************************
-*
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY 0x0F00
-
-#define POTS_ATT_00DB 0x00
-#define POTS_ATT_04DB 0x01
-#define POTS_ATT_08DB 0x02
-#define POTS_ATT_12DB 0x03
-#define POTS_ATT_16DB 0x04
-#define POTS_ATT_20DB 0x05
-#define POTS_ATT_24DB 0x06
-#define POTS_ATT_28DB 0x07
-#define POTS_MUTE 0x80
-
-/******************************************************************************
-*
-* The DAA controls the interface to the PSTN port. The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-*
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int)
-
-#define DAA_US 1 /*PITA 8kHz */
-#define DAA_UK 2 /*ISAR34 8kHz */
-#define DAA_FRANCE 3 /* */
-#define DAA_GERMANY 4
-#define DAA_AUSTRALIA 5
-#define DAA_JAPAN 6
-
-/******************************************************************************
-*
-* Use IXJCTL_PORT to set or query the port the card is set to. If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-*
-******************************************************************************/
-#define IXJCTL_PORT _IOW ('q', 0xD1, int)
-
-#define PORT_QUERY 0
-#define PORT_POTS 1
-#define PORT_PSTN 2
-#define PORT_SPEAKER 3
-#define PORT_HANDSET 4
-
-#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE
-#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE
-
-#define PSTN_ON_HOOK 0
-#define PSTN_RINGING 1
-#define PSTN_OFF_HOOK 2
-#define PSTN_PULSE_DIAL 3
-
-/******************************************************************************
-*
-* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR),
-* and the transmit gain (AGX). OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB.
-*
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int)
-
-#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */
-#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */
-#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */
-
-#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */
-#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */
-#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */
-#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */
-
-#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3)
-
-#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *)
-#define IXJCTL_VMWI _IOR ('q', 0xD8, int)
-#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *)
-/******************************************************************************
-*
-* The wink duration is tunable with this ioctl. The default wink duration
-* is 320ms. You do not need to use this ioctl if you do not require a
-* different wink duration.
-*
-******************************************************************************/
-#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION
-
-/******************************************************************************
-*
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-*
-******************************************************************************/
-#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-* /usr/include/asm/param.h, this determines the fundamental
-* frequency of the clock ticks on your Linux system. The kernel
-* must be rebuilt if you change this value, also all modules you
-* use (except this one) must be recompiled. The default value
-* is 100, and you only need to use this IOCTL if you use some
-* other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-* the DSP. This value cannot be larger than HZ. By
-* increasing both of these values, you may be able to reduce
-* latency because the max hang time that can exist between the
-* driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7)
-#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int)
-
-/******************************************************************************
-*
-* This ioctl allows the user application to control what events the driver
-* will send signals for, and what signals it will send for which event.
-* By default, if signaling is enabled, all events will send SIGIO when
-* they occur. To disable signals for an event set the signal to 0.
-*
-******************************************************************************/
-typedef enum {
- SIG_DTMF_READY,
- SIG_HOOKSTATE,
- SIG_FLASH,
- SIG_PSTN_RING,
- SIG_CALLER_ID,
- SIG_PSTN_WINK,
- SIG_F0, SIG_F1, SIG_F2, SIG_F3,
- SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
- SIG_READ_READY = 33,
- SIG_WRITE_READY = 34
-} IXJ_SIGEVENT;
-
-typedef struct {
- unsigned int event;
- int signal;
-} IXJ_SIGDEF;
-
-#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *)
-
-/******************************************************************************
-*
-* These ioctls allow the user application to change the gain in the
-* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause
-* return value to be the current setting. Valid values to set are 0x00 - 0x1F
-*
-* 11111 = +12 dB
-* 10111 = 0 dB
-* 00000 = -34.5 dB
-*
-* IXJCTL_SC_RXG sets the Receive gain
-* IXJCTL_SC_TXG sets the Transmit gain
-*
-******************************************************************************/
-#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int)
-#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int)
-
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function). It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes. The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int)
-
-/******************************************************************************
- *
- * new structure for accessing raw filter information
- *
- ******************************************************************************/
-
-typedef struct {
- unsigned int filter;
- char enable;
- unsigned int coeff[19];
-} IXJ_FILTER_RAW;
-
-#endif
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
deleted file mode 100644
index a18b719..0000000
--- a/include/linux/jffs2.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2001-2007 Red Hat, Inc.
- * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * Created by David Woodhouse <dwmw2@infradead.org>
- *
- * For licensing information, see the file 'LICENCE' in the
- * jffs2 directory.
- */
-
-#ifndef __LINUX_JFFS2_H__
-#define __LINUX_JFFS2_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* You must include something which defines the C99 uintXX_t types.
- We don't do it from here because this file is used in too many
- different environments. */
-
-/* Values we may expect to find in the 'magic' field */
-#define JFFS2_OLD_MAGIC_BITMASK 0x1984
-#define JFFS2_MAGIC_BITMASK 0x1985
-#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
-#define JFFS2_EMPTY_BITMASK 0xffff
-#define JFFS2_DIRTY_BITMASK 0x0000
-
-/* Summary node MAGIC marker */
-#define JFFS2_SUM_MAGIC 0x02851885
-
-/* We only allow a single char for length, and 0xFF is empty flash so
- we don't want it confused with a real length. Hence max 254.
-*/
-#define JFFS2_MAX_NAME_LEN 254
-
-/* How small can we sensibly write nodes? */
-#define JFFS2_MIN_DATA_LEN 128
-
-#define JFFS2_COMPR_NONE 0x00
-#define JFFS2_COMPR_ZERO 0x01
-#define JFFS2_COMPR_RTIME 0x02
-#define JFFS2_COMPR_RUBINMIPS 0x03
-#define JFFS2_COMPR_COPY 0x04
-#define JFFS2_COMPR_DYNRUBIN 0x05
-#define JFFS2_COMPR_ZLIB 0x06
-#define JFFS2_COMPR_LZO 0x07
-/* Compatibility flags. */
-#define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
-#define JFFS2_NODE_ACCURATE 0x2000
-/* INCOMPAT: Fail to mount the filesystem */
-#define JFFS2_FEATURE_INCOMPAT 0xc000
-/* ROCOMPAT: Mount read-only */
-#define JFFS2_FEATURE_ROCOMPAT 0x8000
-/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
-/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
-
-#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
-#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
-#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
-
-#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
-
-#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
-#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
-
-/* XATTR Related */
-#define JFFS2_XPREFIX_USER 1 /* for "user." */
-#define JFFS2_XPREFIX_SECURITY 2 /* for "security." */
-#define JFFS2_XPREFIX_ACL_ACCESS 3 /* for "system.posix_acl_access" */
-#define JFFS2_XPREFIX_ACL_DEFAULT 4 /* for "system.posix_acl_default" */
-#define JFFS2_XPREFIX_TRUSTED 5 /* for "trusted.*" */
-
-#define JFFS2_ACL_VERSION 0x0001
-
-// Maybe later...
-//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
-
-
-#define JFFS2_INO_FLAG_PREREAD 1 /* Do read_inode() for this one at
- mount time, don't wait for it to
- happen later */
-#define JFFS2_INO_FLAG_USERCOMPR 2 /* User has requested a specific
- compression type */
-
-
-/* These can go once we've made sure we've caught all uses without
- byteswapping */
-
-typedef struct {
- __u32 v32;
-} __attribute__((packed)) jint32_t;
-
-typedef struct {
- __u32 m;
-} __attribute__((packed)) jmode_t;
-
-typedef struct {
- __u16 v16;
-} __attribute__((packed)) jint16_t;
-
-struct jffs2_unknown_node
-{
- /* All start like this */
- jint16_t magic;
- jint16_t nodetype;
- jint32_t totlen; /* So we can skip over nodes we don't grok */
- jint32_t hdr_crc;
-};
-
-struct jffs2_raw_dirent
-{
- jint16_t magic;
- jint16_t nodetype; /* == JFFS2_NODETYPE_DIRENT */
- jint32_t totlen;
- jint32_t hdr_crc;
- jint32_t pino;
- jint32_t version;
- jint32_t ino; /* == zero for unlink */
- jint32_t mctime;
- __u8 nsize;
- __u8 type;
- __u8 unused[2];
- jint32_t node_crc;
- jint32_t name_crc;
- __u8 name[0];
-};
-
-/* The JFFS2 raw inode structure: Used for storage on physical media. */
-/* The uid, gid, atime, mtime and ctime members could be longer, but
- are left like this for space efficiency. If and when people decide
- they really need them extended, it's simple enough to add support for
- a new type of raw node.
-*/
-struct jffs2_raw_inode
-{
- jint16_t magic; /* A constant magic number. */
- jint16_t nodetype; /* == JFFS2_NODETYPE_INODE */
- jint32_t totlen; /* Total length of this node (inc data, etc.) */
- jint32_t hdr_crc;
- jint32_t ino; /* Inode number. */
- jint32_t version; /* Version number. */
- jmode_t mode; /* The file's type or mode. */
- jint16_t uid; /* The file's owner. */
- jint16_t gid; /* The file's group. */
- jint32_t isize; /* Total resultant size of this inode (used for truncations) */
- jint32_t atime; /* Last access time. */
- jint32_t mtime; /* Last modification time. */
- jint32_t ctime; /* Change time. */
- jint32_t offset; /* Where to begin to write. */
- jint32_t csize; /* (Compressed) data size */
- jint32_t dsize; /* Size of the node's data. (after decompression) */
- __u8 compr; /* Compression algorithm used */
- __u8 usercompr; /* Compression algorithm requested by the user */
- jint16_t flags; /* See JFFS2_INO_FLAG_* */
- jint32_t data_crc; /* CRC for the (compressed) data. */
- jint32_t node_crc; /* CRC for the raw inode (excluding data) */
- __u8 data[0];
-};
-
-struct jffs2_raw_xattr {
- jint16_t magic;
- jint16_t nodetype; /* = JFFS2_NODETYPE_XATTR */
- jint32_t totlen;
- jint32_t hdr_crc;
- jint32_t xid; /* XATTR identifier number */
- jint32_t version;
- __u8 xprefix;
- __u8 name_len;
- jint16_t value_len;
- jint32_t data_crc;
- jint32_t node_crc;
- __u8 data[0];
-} __attribute__((packed));
-
-struct jffs2_raw_xref
-{
- jint16_t magic;
- jint16_t nodetype; /* = JFFS2_NODETYPE_XREF */
- jint32_t totlen;
- jint32_t hdr_crc;
- jint32_t ino; /* inode number */
- jint32_t xid; /* XATTR identifier number */
- jint32_t xseqno; /* xref sequential number */
- jint32_t node_crc;
-} __attribute__((packed));
-
-struct jffs2_raw_summary
-{
- jint16_t magic;
- jint16_t nodetype; /* = JFFS2_NODETYPE_SUMMARY */
- jint32_t totlen;
- jint32_t hdr_crc;
- jint32_t sum_num; /* number of sum entries*/
- jint32_t cln_mkr; /* clean marker size, 0 = no cleanmarker */
- jint32_t padded; /* sum of the size of padding nodes */
- jint32_t sum_crc; /* summary information crc */
- jint32_t node_crc; /* node crc */
- jint32_t sum[0]; /* inode summary info */
-};
-
-union jffs2_node_union
-{
- struct jffs2_raw_inode i;
- struct jffs2_raw_dirent d;
- struct jffs2_raw_xattr x;
- struct jffs2_raw_xref r;
- struct jffs2_raw_summary s;
- struct jffs2_unknown_node u;
-};
-
-/* Data payload for device nodes. */
-union jffs2_device_node {
- jint16_t old_id;
- jint32_t new_id;
-};
-
-#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 47199b1..cbf2aa9 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -1,12 +1,8 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
/*
* Copyright (C) 1996-2000 Vojtech Pavlik
*
* Sponsored by SuSE
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,113 +22,11 @@
* e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
-#include <linux/types.h>
-#include <linux/input.h>
-
-/*
- * Version
- */
-
-#define JS_VERSION 0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON 0x01 /* button pressed/released */
-#define JS_EVENT_AXIS 0x02 /* joystick moved */
-#define JS_EVENT_INIT 0x80 /* initial state of device */
-
-struct js_event {
- __u32 time; /* event timestamp in milliseconds */
- __s16 value; /* value */
- __u8 type; /* event type */
- __u8 number; /* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */
-
-#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */
-#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */
-#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */
-
-#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */
-#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */
-
-#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */
-#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */
-#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */
-#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE 0x00 /* returns raw values */
-#define JS_CORR_BROKEN 0x01 /* broken line */
-
-struct js_corr {
- __s32 coef[8];
- __s16 prec;
- __u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE 1
-#define JS_FALSE 0
-#define JS_X_0 0x01
-#define JS_Y_0 0x02
-#define JS_X_1 0x04
-#define JS_Y_1 0x08
-#define JS_MAX 2
-
-#define JS_DEF_TIMEOUT 0x1300
-#define JS_DEF_CORR 0
-#define JS_DEF_TIMELIMIT 10L
-
-#define JS_SET_CAL 1
-#define JS_GET_CAL 2
-#define JS_SET_TIMEOUT 3
-#define JS_GET_TIMEOUT 4
-#define JS_SET_TIMELIMIT 5
-#define JS_GET_TIMELIMIT 6
-#define JS_GET_ALL 7
-#define JS_SET_ALL 8
-
-struct JS_DATA_TYPE {
- __s32 buttons;
- __s32 x;
- __s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
- __s32 JS_TIMEOUT;
- __s32 BUSY;
- __s32 JS_EXPIRETIME;
- __s32 JS_TIMELIMIT;
- struct JS_DATA_TYPE JS_SAVE;
- struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
- __s32 JS_TIMEOUT;
- __s32 BUSY;
- __s64 JS_EXPIRETIME;
- __s64 JS_TIMELIMIT;
- struct JS_DATA_TYPE JS_SAVE;
- struct JS_DATA_TYPE JS_CORR;
-};
+#include <uapi/linux/joystick.h>
-#ifdef __KERNEL__
#if BITS_PER_LONG == 64
#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
#elif BITS_PER_LONG == 32
@@ -140,6 +34,4 @@ struct JS_DATA_SAVE_TYPE_64 {
#else
#error Unexpected BITS_PER_LONG
#endif
-#endif
-
#endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
index c36d847..25bd17f 100644
--- a/include/linux/kd.h
+++ b/include/linux/kd.h
@@ -1,186 +1,7 @@
#ifndef _LINUX_KD_H
#define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-/* 0x4B is 'K', to avoid collision with termios and vt */
+#include <uapi/linux/kd.h>
-#define GIO_FONT 0x4B60 /* gets font in expanded form */
-#define PIO_FONT 0x4B61 /* use font in expanded form */
-
-#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */
-#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */
-struct consolefontdesc {
- unsigned short charcount; /* characters in font (256 or 512) */
- unsigned short charheight; /* scan lines per character (1-32) */
- char __user *chardata; /* font data in expanded form */
-};
-
-#define PIO_FONTRESET 0x4B6D /* reset to default font */
-
-#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */
-#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */
-
-#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */
-#define KDMKTONE 0x4B30 /* generate tone */
-
-#define KDGETLED 0x4B31 /* return current led state */
-#define KDSETLED 0x4B32 /* set led state [lights, not flags] */
-#define LED_SCR 0x01 /* scroll lock led */
-#define LED_NUM 0x02 /* num lock led */
-#define LED_CAP 0x04 /* caps lock led */
-
-#define KDGKBTYPE 0x4B33 /* get keyboard type */
-#define KB_84 0x01
-#define KB_101 0x02 /* this is what we always answer */
-#define KB_OTHER 0x03
-
-#define KDADDIO 0x4B34 /* add i/o port as valid */
-#define KDDELIO 0x4B35 /* del i/o port as valid */
-#define KDENABIO 0x4B36 /* enable i/o to video board */
-#define KDDISABIO 0x4B37 /* disable i/o to video board */
-
-#define KDSETMODE 0x4B3A /* set text/graphics mode */
-#define KD_TEXT 0x00
-#define KD_GRAPHICS 0x01
-#define KD_TEXT0 0x02 /* obsolete */
-#define KD_TEXT1 0x03 /* obsolete */
-#define KDGETMODE 0x4B3B /* get current mode */
-
-#define KDMAPDISP 0x4B3C /* map display into address space */
-#define KDUNMAPDISP 0x4B3D /* unmap display from address space */
-
-typedef char scrnmap_t;
-#define E_TABSZ 256
-#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */
-#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */
-struct unipair {
- unsigned short unicode;
- unsigned short fontpos;
-};
-struct unimapdesc {
- unsigned short entry_ct;
- struct unipair __user *entries;
-};
-#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */
-struct unimapinit {
- unsigned short advised_hashsize; /* 0 if no opinion */
- unsigned short advised_hashstep; /* 0 if no opinion */
- unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */
-
-#define K_RAW 0x00
-#define K_XLATE 0x01
-#define K_MEDIUMRAW 0x02
-#define K_UNICODE 0x03
-#define K_OFF 0x04
-#define KDGKBMODE 0x4B44 /* gets current keyboard mode */
-#define KDSKBMODE 0x4B45 /* sets current keyboard mode */
-
-#define K_METABIT 0x03
-#define K_ESCPREFIX 0x04
-#define KDGKBMETA 0x4B62 /* gets meta key handling mode */
-#define KDSKBMETA 0x4B63 /* sets meta key handling mode */
-
-#define K_SCROLLLOCK 0x01
-#define K_NUMLOCK 0x02
-#define K_CAPSLOCK 0x04
-#define KDGKBLED 0x4B64 /* get led flags (not lights) */
-#define KDSKBLED 0x4B65 /* set led flags (not lights) */
-
-struct kbentry {
- unsigned char kb_table;
- unsigned char kb_index;
- unsigned short kb_value;
-};
-#define K_NORMTAB 0x00
-#define K_SHIFTTAB 0x01
-#define K_ALTTAB 0x02
-#define K_ALTSHIFTTAB 0x03
-
-#define KDGKBENT 0x4B46 /* gets one entry in translation table */
-#define KDSKBENT 0x4B47 /* sets one entry in translation table */
-
-struct kbsentry {
- unsigned char kb_func;
- unsigned char kb_string[512];
-};
-#define KDGKBSENT 0x4B48 /* gets one function key string entry */
-#define KDSKBSENT 0x4B49 /* sets one function key string entry */
-
-struct kbdiacr {
- unsigned char diacr, base, result;
-};
-struct kbdiacrs {
- unsigned int kb_cnt; /* number of entries in following array */
- struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR 0x4B4A /* read kernel accent table */
-#define KDSKBDIACR 0x4B4B /* write kernel accent table */
-
-struct kbdiacruc {
- unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
- unsigned int kb_cnt; /* number of entries in following array */
- struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */
-#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */
-
-struct kbkeycode {
- unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */
-#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */
-
-#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */
-
-struct kbd_repeat {
- int delay; /* in msec; <= 0: don't change */
- int period; /* in msec; <= 0: don't change */
- /* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate;
- * actually used values are returned */
-
-#define KDFONTOP 0x4B72 /* font operations */
-
-struct console_font_op {
- unsigned int op; /* operation code KD_FONT_OP_* */
- unsigned int flags; /* KD_FONT_FLAG_* */
- unsigned int width, height; /* font size */
- unsigned int charcount;
- unsigned char __user *data; /* font data with height fixed to 32 */
-};
-
-struct console_font {
- unsigned int width, height; /* font size */
- unsigned int charcount;
- unsigned char *data; /* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET 0 /* Set font */
-#define KD_FONT_OP_GET 1 /* Get font */
-#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY 3 /* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
#define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
- don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
#endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
index 2dacab8..c838abe 100644
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -1,6 +1,8 @@
#ifndef _LINUX_KDEV_T_H
#define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
+
+#include <uapi/linux/kdev_t.h>
+
#define MINORBITS 20
#define MINORMASK ((1U << MINORBITS) - 1)
@@ -87,14 +89,4 @@ static inline unsigned sysv_minor(u32 dev)
return dev & 0x3ffff;
}
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev) ((dev)>>8)
-#define MINOR(dev) ((dev) & 0xff)
-#define MKDEV(ma,mi) ((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
index a1bdf69..546eb6a 100644
--- a/include/linux/kernel-page-flags.h
+++ b/include/linux/kernel-page-flags.h
@@ -1,38 +1,8 @@
#ifndef LINUX_KERNEL_PAGE_FLAGS_H
#define LINUX_KERNEL_PAGE_FLAGS_H
-/*
- * Stable page flag bits exported to user space
- */
-
-#define KPF_LOCKED 0
-#define KPF_ERROR 1
-#define KPF_REFERENCED 2
-#define KPF_UPTODATE 3
-#define KPF_DIRTY 4
-#define KPF_LRU 5
-#define KPF_ACTIVE 6
-#define KPF_SLAB 7
-#define KPF_WRITEBACK 8
-#define KPF_RECLAIM 9
-#define KPF_BUDDY 10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP 11
-#define KPF_ANON 12
-#define KPF_SWAPCACHE 13
-#define KPF_SWAPBACKED 14
-#define KPF_COMPOUND_HEAD 15
-#define KPF_COMPOUND_TAIL 16
-#define KPF_HUGE 17
-#define KPF_UNEVICTABLE 18
-#define KPF_HWPOISON 19
-#define KPF_NOPAGE 20
+#include <uapi/linux/kernel-page-flags.h>
-#define KPF_KSM 21
-#define KPF_THP 22
-
-#ifdef __KERNEL__
/* kernel hacking assistances
* WARNING: subject to change, never rely on them!
@@ -46,6 +16,4 @@
#define KPF_ARCH 38
#define KPF_UNCACHED 39
-#endif /* __KERNEL__ */
-
#endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2451f1f..a123b13 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1,15 +1,6 @@
#ifndef _LINUX_KERNEL_H
#define _LINUX_KERNEL_H
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
#include <stdarg.h>
#include <linux/linkage.h>
@@ -22,6 +13,7 @@
#include <linux/printk.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
+#include <uapi/linux/kernel.h>
#define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1))
@@ -716,6 +708,4 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
extern int do_sysinfo(struct sysinfo *info);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
index 9c26839..9be37da 100644
--- a/include/linux/kernelcapi.h
+++ b/include/linux/kernelcapi.h
@@ -6,49 +6,15 @@
* (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
*
*/
-
#ifndef __KERNELCAPI_H__
#define __KERNELCAPI_H__
-#define CAPI_MAXAPPL 240 /* maximum number of applications */
-#define CAPI_MAXCONTR 32 /* maximum number of controller */
-#define CAPI_MAXDATAWINDOW 8
-
-
-typedef struct kcapi_flagdef {
- int contr;
- int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
- char driver[32];
- unsigned int port;
- unsigned irq;
- unsigned int membase;
- int cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE 10
-#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */
-
-/*
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF 0
-#define KCAPI_TRACE_SHORT_NO_DATA 1
-#define KCAPI_TRACE_FULL_NO_DATA 2
-#define KCAPI_TRACE_SHORT 3
-#define KCAPI_TRACE_FULL 4
-
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/notifier.h>
+#include <uapi/linux/kernelcapi.h>
struct capi20_appl {
u16 applid;
@@ -150,6 +116,4 @@ typedef enum {
CapiCallGivenToOtherApplication = 0x3304,
} CAPI_REASON;
-#endif /* __KERNEL__ */
-
#endif /* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 37c5f726..d0b8458 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -1,57 +1,8 @@
#ifndef LINUX_KEXEC_H
#define LINUX_KEXEC_H
-/* kexec system call - It loads the new kernel to boot into.
- * kexec does not sync, or unmount filesystems so if you need
- * that to happen you need to do that yourself.
- */
-
-#include <linux/types.h>
-
-/* kexec flags for different usage scenarios */
-#define KEXEC_ON_CRASH 0x00000001
-#define KEXEC_PRESERVE_CONTEXT 0x00000002
-#define KEXEC_ARCH_MASK 0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386 ( 3 << 16)
-#define KEXEC_ARCH_X86_64 (62 << 16)
-#define KEXEC_ARCH_PPC (20 << 16)
-#define KEXEC_ARCH_PPC64 (21 << 16)
-#define KEXEC_ARCH_IA_64 (50 << 16)
-#define KEXEC_ARCH_ARM (40 << 16)
-#define KEXEC_ARCH_S390 (22 << 16)
-#define KEXEC_ARCH_SH (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS ( 8 << 16)
-
-/* The artificial cap on the number of segments passed to kexec_load. */
-#define KEXEC_SEGMENT_MAX 16
-
-#ifndef __KERNEL__
-/*
- * This structure is used to hold the arguments that are used when
- * loading kernel binaries.
- */
-struct kexec_segment {
- const void *buf;
- size_t bufsz;
- const void *mem;
- size_t memsz;
-};
-
-/* Load a new kernel image as described by the kexec_segment array
- * consisting of passed number of segments at the entry-point address.
- * The flags allow different useage types.
- */
-extern int kexec_load(void *, size_t, struct kexec_segment *,
- unsigned long int);
-#endif /* __KERNEL__ */
+#include <uapi/linux/kexec.h>
-#ifdef __KERNEL__
#ifdef CONFIG_KEXEC
#include <linux/list.h>
#include <linux/linkage.h>
@@ -258,5 +209,4 @@ struct task_struct;
static inline void crash_kexec(struct pt_regs *regs) { }
static inline int kexec_should_crash(struct task_struct *p) { return 0; }
#endif /* CONFIG_KEXEC */
-#endif /* __KERNEL__ */
#endif /* LINUX_KEXEC_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 86e5214..131ed51 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -1,28 +1,8 @@
#ifndef __LINUX_KEYBOARD_H
#define __LINUX_KEYBOARD_H
-#include <linux/wait.h>
+#include <uapi/linux/keyboard.h>
-#define KG_SHIFT 0
-#define KG_CTRL 2
-#define KG_ALT 3
-#define KG_ALTGR 1
-#define KG_SHIFTL 4
-#define KG_KANASHIFT 4
-#define KG_SHIFTR 5
-#define KG_CTRLL 6
-#define KG_CTRLR 7
-#define KG_CAPSSHIFT 8
-
-#define NR_SHIFT 9
-
-#define NR_KEYS 256
-#define MAX_NR_KEYMAPS 256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
- may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */
-
-#ifdef __KERNEL__
struct notifier_block;
extern unsigned short *key_maps[MAX_NR_KEYMAPS];
extern unsigned short plain_map[NR_KEYS];
@@ -38,422 +18,3 @@ struct keyboard_notifier_param {
extern int register_keyboard_notifier(struct notifier_block *nb);
extern int unregister_keyboard_notifier(struct notifier_block *nb);
#endif
-
-#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */
-
-#define KT_LATIN 0 /* we depend on this being zero */
-#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */
-#define KT_FN 1
-#define KT_SPEC 2
-#define KT_PAD 3
-#define KT_DEAD 4
-#define KT_CONS 5
-#define KT_CUR 6
-#define KT_SHIFT 7
-#define KT_META 8
-#define KT_ASCII 9
-#define KT_LOCK 10
-#define KT_SLOCK 12
-#define KT_DEAD2 13
-#define KT_BRL 14
-
-#define K(t,v) (((t)<<8)|(v))
-#define KTYP(x) ((x) >> 8)
-#define KVAL(x) ((x) & 0xff)
-
-#define K_F1 K(KT_FN,0)
-#define K_F2 K(KT_FN,1)
-#define K_F3 K(KT_FN,2)
-#define K_F4 K(KT_FN,3)
-#define K_F5 K(KT_FN,4)
-#define K_F6 K(KT_FN,5)
-#define K_F7 K(KT_FN,6)
-#define K_F8 K(KT_FN,7)
-#define K_F9 K(KT_FN,8)
-#define K_F10 K(KT_FN,9)
-#define K_F11 K(KT_FN,10)
-#define K_F12 K(KT_FN,11)
-#define K_F13 K(KT_FN,12)
-#define K_F14 K(KT_FN,13)
-#define K_F15 K(KT_FN,14)
-#define K_F16 K(KT_FN,15)
-#define K_F17 K(KT_FN,16)
-#define K_F18 K(KT_FN,17)
-#define K_F19 K(KT_FN,18)
-#define K_F20 K(KT_FN,19)
-#define K_FIND K(KT_FN,20)
-#define K_INSERT K(KT_FN,21)
-#define K_REMOVE K(KT_FN,22)
-#define K_SELECT K(KT_FN,23)
-#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO K(KT_FN,26)
-#define K_HELP K(KT_FN,27)
-#define K_DO K(KT_FN,28)
-#define K_PAUSE K(KT_FN,29)
-#define K_F21 K(KT_FN,30)
-#define K_F22 K(KT_FN,31)
-#define K_F23 K(KT_FN,32)
-#define K_F24 K(KT_FN,33)
-#define K_F25 K(KT_FN,34)
-#define K_F26 K(KT_FN,35)
-#define K_F27 K(KT_FN,36)
-#define K_F28 K(KT_FN,37)
-#define K_F29 K(KT_FN,38)
-#define K_F30 K(KT_FN,39)
-#define K_F31 K(KT_FN,40)
-#define K_F32 K(KT_FN,41)
-#define K_F33 K(KT_FN,42)
-#define K_F34 K(KT_FN,43)
-#define K_F35 K(KT_FN,44)
-#define K_F36 K(KT_FN,45)
-#define K_F37 K(KT_FN,46)
-#define K_F38 K(KT_FN,47)
-#define K_F39 K(KT_FN,48)
-#define K_F40 K(KT_FN,49)
-#define K_F41 K(KT_FN,50)
-#define K_F42 K(KT_FN,51)
-#define K_F43 K(KT_FN,52)
-#define K_F44 K(KT_FN,53)
-#define K_F45 K(KT_FN,54)
-#define K_F46 K(KT_FN,55)
-#define K_F47 K(KT_FN,56)
-#define K_F48 K(KT_FN,57)
-#define K_F49 K(KT_FN,58)
-#define K_F50 K(KT_FN,59)
-#define K_F51 K(KT_FN,60)
-#define K_F52 K(KT_FN,61)
-#define K_F53 K(KT_FN,62)
-#define K_F54 K(KT_FN,63)
-#define K_F55 K(KT_FN,64)
-#define K_F56 K(KT_FN,65)
-#define K_F57 K(KT_FN,66)
-#define K_F58 K(KT_FN,67)
-#define K_F59 K(KT_FN,68)
-#define K_F60 K(KT_FN,69)
-#define K_F61 K(KT_FN,70)
-#define K_F62 K(KT_FN,71)
-#define K_F63 K(KT_FN,72)
-#define K_F64 K(KT_FN,73)
-#define K_F65 K(KT_FN,74)
-#define K_F66 K(KT_FN,75)
-#define K_F67 K(KT_FN,76)
-#define K_F68 K(KT_FN,77)
-#define K_F69 K(KT_FN,78)
-#define K_F70 K(KT_FN,79)
-#define K_F71 K(KT_FN,80)
-#define K_F72 K(KT_FN,81)
-#define K_F73 K(KT_FN,82)
-#define K_F74 K(KT_FN,83)
-#define K_F75 K(KT_FN,84)
-#define K_F76 K(KT_FN,85)
-#define K_F77 K(KT_FN,86)
-#define K_F78 K(KT_FN,87)
-#define K_F79 K(KT_FN,88)
-#define K_F80 K(KT_FN,89)
-#define K_F81 K(KT_FN,90)
-#define K_F82 K(KT_FN,91)
-#define K_F83 K(KT_FN,92)
-#define K_F84 K(KT_FN,93)
-#define K_F85 K(KT_FN,94)
-#define K_F86 K(KT_FN,95)
-#define K_F87 K(KT_FN,96)
-#define K_F88 K(KT_FN,97)
-#define K_F89 K(KT_FN,98)
-#define K_F90 K(KT_FN,99)
-#define K_F91 K(KT_FN,100)
-#define K_F92 K(KT_FN,101)
-#define K_F93 K(KT_FN,102)
-#define K_F94 K(KT_FN,103)
-#define K_F95 K(KT_FN,104)
-#define K_F96 K(KT_FN,105)
-#define K_F97 K(KT_FN,106)
-#define K_F98 K(KT_FN,107)
-#define K_F99 K(KT_FN,108)
-#define K_F100 K(KT_FN,109)
-#define K_F101 K(KT_FN,110)
-#define K_F102 K(KT_FN,111)
-#define K_F103 K(KT_FN,112)
-#define K_F104 K(KT_FN,113)
-#define K_F105 K(KT_FN,114)
-#define K_F106 K(KT_FN,115)
-#define K_F107 K(KT_FN,116)
-#define K_F108 K(KT_FN,117)
-#define K_F109 K(KT_FN,118)
-#define K_F110 K(KT_FN,119)
-#define K_F111 K(KT_FN,120)
-#define K_F112 K(KT_FN,121)
-#define K_F113 K(KT_FN,122)
-#define K_F114 K(KT_FN,123)
-#define K_F115 K(KT_FN,124)
-#define K_F116 K(KT_FN,125)
-#define K_F117 K(KT_FN,126)
-#define K_F118 K(KT_FN,127)
-#define K_F119 K(KT_FN,128)
-#define K_F120 K(KT_FN,129)
-#define K_F121 K(KT_FN,130)
-#define K_F122 K(KT_FN,131)
-#define K_F123 K(KT_FN,132)
-#define K_F124 K(KT_FN,133)
-#define K_F125 K(KT_FN,134)
-#define K_F126 K(KT_FN,135)
-#define K_F127 K(KT_FN,136)
-#define K_F128 K(KT_FN,137)
-#define K_F129 K(KT_FN,138)
-#define K_F130 K(KT_FN,139)
-#define K_F131 K(KT_FN,140)
-#define K_F132 K(KT_FN,141)
-#define K_F133 K(KT_FN,142)
-#define K_F134 K(KT_FN,143)
-#define K_F135 K(KT_FN,144)
-#define K_F136 K(KT_FN,145)
-#define K_F137 K(KT_FN,146)
-#define K_F138 K(KT_FN,147)
-#define K_F139 K(KT_FN,148)
-#define K_F140 K(KT_FN,149)
-#define K_F141 K(KT_FN,150)
-#define K_F142 K(KT_FN,151)
-#define K_F143 K(KT_FN,152)
-#define K_F144 K(KT_FN,153)
-#define K_F145 K(KT_FN,154)
-#define K_F146 K(KT_FN,155)
-#define K_F147 K(KT_FN,156)
-#define K_F148 K(KT_FN,157)
-#define K_F149 K(KT_FN,158)
-#define K_F150 K(KT_FN,159)
-#define K_F151 K(KT_FN,160)
-#define K_F152 K(KT_FN,161)
-#define K_F153 K(KT_FN,162)
-#define K_F154 K(KT_FN,163)
-#define K_F155 K(KT_FN,164)
-#define K_F156 K(KT_FN,165)
-#define K_F157 K(KT_FN,166)
-#define K_F158 K(KT_FN,167)
-#define K_F159 K(KT_FN,168)
-#define K_F160 K(KT_FN,169)
-#define K_F161 K(KT_FN,170)
-#define K_F162 K(KT_FN,171)
-#define K_F163 K(KT_FN,172)
-#define K_F164 K(KT_FN,173)
-#define K_F165 K(KT_FN,174)
-#define K_F166 K(KT_FN,175)
-#define K_F167 K(KT_FN,176)
-#define K_F168 K(KT_FN,177)
-#define K_F169 K(KT_FN,178)
-#define K_F170 K(KT_FN,179)
-#define K_F171 K(KT_FN,180)
-#define K_F172 K(KT_FN,181)
-#define K_F173 K(KT_FN,182)
-#define K_F174 K(KT_FN,183)
-#define K_F175 K(KT_FN,184)
-#define K_F176 K(KT_FN,185)
-#define K_F177 K(KT_FN,186)
-#define K_F178 K(KT_FN,187)
-#define K_F179 K(KT_FN,188)
-#define K_F180 K(KT_FN,189)
-#define K_F181 K(KT_FN,190)
-#define K_F182 K(KT_FN,191)
-#define K_F183 K(KT_FN,192)
-#define K_F184 K(KT_FN,193)
-#define K_F185 K(KT_FN,194)
-#define K_F186 K(KT_FN,195)
-#define K_F187 K(KT_FN,196)
-#define K_F188 K(KT_FN,197)
-#define K_F189 K(KT_FN,198)
-#define K_F190 K(KT_FN,199)
-#define K_F191 K(KT_FN,200)
-#define K_F192 K(KT_FN,201)
-#define K_F193 K(KT_FN,202)
-#define K_F194 K(KT_FN,203)
-#define K_F195 K(KT_FN,204)
-#define K_F196 K(KT_FN,205)
-#define K_F197 K(KT_FN,206)
-#define K_F198 K(KT_FN,207)
-#define K_F199 K(KT_FN,208)
-#define K_F200 K(KT_FN,209)
-#define K_F201 K(KT_FN,210)
-#define K_F202 K(KT_FN,211)
-#define K_F203 K(KT_FN,212)
-#define K_F204 K(KT_FN,213)
-#define K_F205 K(KT_FN,214)
-#define K_F206 K(KT_FN,215)
-#define K_F207 K(KT_FN,216)
-#define K_F208 K(KT_FN,217)
-#define K_F209 K(KT_FN,218)
-#define K_F210 K(KT_FN,219)
-#define K_F211 K(KT_FN,220)
-#define K_F212 K(KT_FN,221)
-#define K_F213 K(KT_FN,222)
-#define K_F214 K(KT_FN,223)
-#define K_F215 K(KT_FN,224)
-#define K_F216 K(KT_FN,225)
-#define K_F217 K(KT_FN,226)
-#define K_F218 K(KT_FN,227)
-#define K_F219 K(KT_FN,228)
-#define K_F220 K(KT_FN,229)
-#define K_F221 K(KT_FN,230)
-#define K_F222 K(KT_FN,231)
-#define K_F223 K(KT_FN,232)
-#define K_F224 K(KT_FN,233)
-#define K_F225 K(KT_FN,234)
-#define K_F226 K(KT_FN,235)
-#define K_F227 K(KT_FN,236)
-#define K_F228 K(KT_FN,237)
-#define K_F229 K(KT_FN,238)
-#define K_F230 K(KT_FN,239)
-#define K_F231 K(KT_FN,240)
-#define K_F232 K(KT_FN,241)
-#define K_F233 K(KT_FN,242)
-#define K_F234 K(KT_FN,243)
-#define K_F235 K(KT_FN,244)
-#define K_F236 K(KT_FN,245)
-#define K_F237 K(KT_FN,246)
-#define K_F238 K(KT_FN,247)
-#define K_F239 K(KT_FN,248)
-#define K_F240 K(KT_FN,249)
-#define K_F241 K(KT_FN,250)
-#define K_F242 K(KT_FN,251)
-#define K_F243 K(KT_FN,252)
-#define K_F244 K(KT_FN,253)
-#define K_F245 K(KT_FN,254)
-#define K_UNDO K(KT_FN,255)
-
-
-#define K_HOLE K(KT_SPEC,0)
-#define K_ENTER K(KT_SPEC,1)
-#define K_SH_REGS K(KT_SPEC,2)
-#define K_SH_MEM K(KT_SPEC,3)
-#define K_SH_STAT K(KT_SPEC,4)
-#define K_BREAK K(KT_SPEC,5)
-#define K_CONS K(KT_SPEC,6)
-#define K_CAPS K(KT_SPEC,7)
-#define K_NUM K(KT_SPEC,8)
-#define K_HOLD K(KT_SPEC,9)
-#define K_SCROLLFORW K(KT_SPEC,10)
-#define K_SCROLLBACK K(KT_SPEC,11)
-#define K_BOOT K(KT_SPEC,12)
-#define K_CAPSON K(KT_SPEC,13)
-#define K_COMPOSE K(KT_SPEC,14)
-#define K_SAK K(KT_SPEC,15)
-#define K_DECRCONSOLE K(KT_SPEC,16)
-#define K_INCRCONSOLE K(KT_SPEC,17)
-#define K_SPAWNCONSOLE K(KT_SPEC,18)
-#define K_BARENUMLOCK K(KT_SPEC,19)
-
-#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0 K(KT_PAD,0)
-#define K_P1 K(KT_PAD,1)
-#define K_P2 K(KT_PAD,2)
-#define K_P3 K(KT_PAD,3)
-#define K_P4 K(KT_PAD,4)
-#define K_P5 K(KT_PAD,5)
-#define K_P6 K(KT_PAD,6)
-#define K_P7 K(KT_PAD,7)
-#define K_P8 K(KT_PAD,8)
-#define K_P9 K(KT_PAD,9)
-#define K_PPLUS K(KT_PAD,10) /* key-pad plus */
-#define K_PMINUS K(KT_PAD,11) /* key-pad minus */
-#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */
-#define K_PSLASH K(KT_PAD,13) /* key-pad slash */
-#define K_PENTER K(KT_PAD,14) /* key-pad enter */
-#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */
-#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */
-#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */
-#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */
-
-#define NR_PAD 20
-
-#define K_DGRAVE K(KT_DEAD,0)
-#define K_DACUTE K(KT_DEAD,1)
-#define K_DCIRCM K(KT_DEAD,2)
-#define K_DTILDE K(KT_DEAD,3)
-#define K_DDIERE K(KT_DEAD,4)
-#define K_DCEDIL K(KT_DEAD,5)
-
-#define NR_DEAD 6
-
-#define K_DOWN K(KT_CUR,0)
-#define K_LEFT K(KT_CUR,1)
-#define K_RIGHT K(KT_CUR,2)
-#define K_UP K(KT_CUR,3)
-
-#define K_SHIFT K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL K(KT_SHIFT,KG_CTRL)
-#define K_ALT K(KT_SHIFT,KG_ALT)
-#define K_ALTGR K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0 K(KT_ASCII,0)
-#define K_ASC1 K(KT_ASCII,1)
-#define K_ASC2 K(KT_ASCII,2)
-#define K_ASC3 K(KT_ASCII,3)
-#define K_ASC4 K(KT_ASCII,4)
-#define K_ASC5 K(KT_ASCII,5)
-#define K_ASC6 K(KT_ASCII,6)
-#define K_ASC7 K(KT_ASCII,7)
-#define K_ASC8 K(KT_ASCII,8)
-#define K_ASC9 K(KT_ASCII,9)
-#define K_HEX0 K(KT_ASCII,10)
-#define K_HEX1 K(KT_ASCII,11)
-#define K_HEX2 K(KT_ASCII,12)
-#define K_HEX3 K(KT_ASCII,13)
-#define K_HEX4 K(KT_ASCII,14)
-#define K_HEX5 K(KT_ASCII,15)
-#define K_HEX6 K(KT_ASCII,16)
-#define K_HEX7 K(KT_ASCII,17)
-#define K_HEX8 K(KT_ASCII,18)
-#define K_HEX9 K(KT_ASCII,19)
-#define K_HEXa K(KT_ASCII,20)
-#define K_HEXb K(KT_ASCII,21)
-#define K_HEXc K(KT_ASCII,22)
-#define K_HEXd K(KT_ASCII,23)
-#define K_HEXe K(KT_ASCII,24)
-#define K_HEXf K(KT_ASCII,25)
-
-#define NR_ASCII 26
-
-#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK 9
-
-#define K_BRL_BLANK K(KT_BRL, 0)
-#define K_BRL_DOT1 K(KT_BRL, 1)
-#define K_BRL_DOT2 K(KT_BRL, 2)
-#define K_BRL_DOT3 K(KT_BRL, 3)
-#define K_BRL_DOT4 K(KT_BRL, 4)
-#define K_BRL_DOT5 K(KT_BRL, 5)
-#define K_BRL_DOT6 K(KT_BRL, 6)
-#define K_BRL_DOT7 K(KT_BRL, 7)
-#define K_BRL_DOT8 K(KT_BRL, 8)
-#define K_BRL_DOT9 K(KT_BRL, 9)
-#define K_BRL_DOT10 K(KT_BRL, 10)
-
-#define NR_BRL 11
-
-#define MAX_DIACR 256
-#endif
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
deleted file mode 100644
index c9b7f4fa..0000000
--- a/include/linux/keyctl.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* keyctl.h: keyctl command IDs
- *
- * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_KEYCTL_H
-#define _LINUX_KEYCTL_H
-
-/* special process keyring shortcut IDs */
-#define KEY_SPEC_THREAD_KEYRING -1 /* - key ID for thread-specific keyring */
-#define KEY_SPEC_PROCESS_KEYRING -2 /* - key ID for process-specific keyring */
-#define KEY_SPEC_SESSION_KEYRING -3 /* - key ID for session-specific keyring */
-#define KEY_SPEC_USER_KEYRING -4 /* - key ID for UID-specific keyring */
-#define KEY_SPEC_USER_SESSION_KEYRING -5 /* - key ID for UID-session keyring */
-#define KEY_SPEC_GROUP_KEYRING -6 /* - key ID for GID-specific keyring */
-#define KEY_SPEC_REQKEY_AUTH_KEY -7 /* - key ID for assumed request_key auth key */
-#define KEY_SPEC_REQUESTOR_KEYRING -8 /* - key ID for request_key() dest keyring */
-
-/* request-key default keyrings */
-#define KEY_REQKEY_DEFL_NO_CHANGE -1
-#define KEY_REQKEY_DEFL_DEFAULT 0
-#define KEY_REQKEY_DEFL_THREAD_KEYRING 1
-#define KEY_REQKEY_DEFL_PROCESS_KEYRING 2
-#define KEY_REQKEY_DEFL_SESSION_KEYRING 3
-#define KEY_REQKEY_DEFL_USER_KEYRING 4
-#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING 5
-#define KEY_REQKEY_DEFL_GROUP_KEYRING 6
-#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING 7
-
-/* keyctl commands */
-#define KEYCTL_GET_KEYRING_ID 0 /* ask for a keyring's ID */
-#define KEYCTL_JOIN_SESSION_KEYRING 1 /* join or start named session keyring */
-#define KEYCTL_UPDATE 2 /* update a key */
-#define KEYCTL_REVOKE 3 /* revoke a key */
-#define KEYCTL_CHOWN 4 /* set ownership of a key */
-#define KEYCTL_SETPERM 5 /* set perms on a key */
-#define KEYCTL_DESCRIBE 6 /* describe a key */
-#define KEYCTL_CLEAR 7 /* clear contents of a keyring */
-#define KEYCTL_LINK 8 /* link a key into a keyring */
-#define KEYCTL_UNLINK 9 /* unlink a key from a keyring */
-#define KEYCTL_SEARCH 10 /* search for a key in a keyring */
-#define KEYCTL_READ 11 /* read a key or keyring's contents */
-#define KEYCTL_INSTANTIATE 12 /* instantiate a partially constructed key */
-#define KEYCTL_NEGATE 13 /* negate a partially constructed key */
-#define KEYCTL_SET_REQKEY_KEYRING 14 /* set default request-key keyring */
-#define KEYCTL_SET_TIMEOUT 15 /* set key timeout */
-#define KEYCTL_ASSUME_AUTHORITY 16 /* assume request_key() authorisation */
-#define KEYCTL_GET_SECURITY 17 /* get key security label */
-#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */
-#define KEYCTL_REJECT 19 /* reject a partially constructed key */
-#define KEYCTL_INSTANTIATE_IOV 20 /* instantiate a partially constructed key */
-#define KEYCTL_INVALIDATE 21 /* invalidate a key */
-
-#endif /* _LINUX_KEYCTL_H */
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
deleted file mode 100644
index 0a6d6ba..0000000
--- a/include/linux/kvm.h
+++ /dev/null
@@ -1,975 +0,0 @@
-#ifndef __LINUX_KVM_H
-#define __LINUX_KVM_H
-
-/*
- * Userspace interface for /dev/kvm - kernel based virtual machine
- *
- * Note: you must update KVM_API_VERSION if you change this interface.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <asm/kvm.h>
-
-#define KVM_API_VERSION 12
-
-/* *** Deprecated interfaces *** */
-
-#define KVM_TRC_SHIFT 16
-
-#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1))
-
-#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01)
-
-#define KVM_TRC_HEAD_SIZE 12
-#define KVM_TRC_CYCLE_SIZE 8
-#define KVM_TRC_EXTRA_MAX 7
-
-#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19)
-
-struct kvm_user_trace_setup {
- __u32 buf_size;
- __u32 buf_nr;
-};
-
-#define __KVM_DEPRECATED_MAIN_W_0x06 \
- _IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
-#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
-
-#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
-
-struct kvm_breakpoint {
- __u32 enabled;
- __u32 padding;
- __u64 address;
-};
-
-struct kvm_debug_guest {
- __u32 enabled;
- __u32 pad;
- struct kvm_breakpoint breakpoints[4];
- __u32 singlestep;
-};
-
-#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
-
-/* *** End of deprecated interfaces *** */
-
-
-/* for KVM_CREATE_MEMORY_REGION */
-struct kvm_memory_region {
- __u32 slot;
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
-};
-
-/* for KVM_SET_USER_MEMORY_REGION */
-struct kvm_userspace_memory_region {
- __u32 slot;
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
- __u64 userspace_addr; /* start of the userspace allocated memory */
-};
-
-/*
- * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
- * other bits are reserved for kvm internal use which are defined in
- * include/linux/kvm_host.h.
- */
-#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0)
-#define KVM_MEM_READONLY (1UL << 1)
-
-/* for KVM_IRQ_LINE */
-struct kvm_irq_level {
- /*
- * ACPI gsi notion of irq.
- * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
- * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
- */
- union {
- __u32 irq;
- __s32 status;
- };
- __u32 level;
-};
-
-
-struct kvm_irqchip {
- __u32 chip_id;
- __u32 pad;
- union {
- char dummy[512]; /* reserving space */
-#ifdef __KVM_HAVE_PIT
- struct kvm_pic_state pic;
-#endif
-#ifdef __KVM_HAVE_IOAPIC
- struct kvm_ioapic_state ioapic;
-#endif
- } chip;
-};
-
-/* for KVM_CREATE_PIT2 */
-struct kvm_pit_config {
- __u32 flags;
- __u32 pad[15];
-};
-
-#define KVM_PIT_SPEAKER_DUMMY 1
-
-#define KVM_EXIT_UNKNOWN 0
-#define KVM_EXIT_EXCEPTION 1
-#define KVM_EXIT_IO 2
-#define KVM_EXIT_HYPERCALL 3
-#define KVM_EXIT_DEBUG 4
-#define KVM_EXIT_HLT 5
-#define KVM_EXIT_MMIO 6
-#define KVM_EXIT_IRQ_WINDOW_OPEN 7
-#define KVM_EXIT_SHUTDOWN 8
-#define KVM_EXIT_FAIL_ENTRY 9
-#define KVM_EXIT_INTR 10
-#define KVM_EXIT_SET_TPR 11
-#define KVM_EXIT_TPR_ACCESS 12
-#define KVM_EXIT_S390_SIEIC 13
-#define KVM_EXIT_S390_RESET 14
-#define KVM_EXIT_DCR 15
-#define KVM_EXIT_NMI 16
-#define KVM_EXIT_INTERNAL_ERROR 17
-#define KVM_EXIT_OSI 18
-#define KVM_EXIT_PAPR_HCALL 19
-#define KVM_EXIT_S390_UCONTROL 20
-
-/* For KVM_EXIT_INTERNAL_ERROR */
-#define KVM_INTERNAL_ERROR_EMULATION 1
-#define KVM_INTERNAL_ERROR_SIMUL_EX 2
-
-/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
-struct kvm_run {
- /* in */
- __u8 request_interrupt_window;
- __u8 padding1[7];
-
- /* out */
- __u32 exit_reason;
- __u8 ready_for_interrupt_injection;
- __u8 if_flag;
- __u8 padding2[2];
-
- /* in (pre_kvm_run), out (post_kvm_run) */
- __u64 cr8;
- __u64 apic_base;
-
-#ifdef __KVM_S390
- /* the processor status word for s390 */
- __u64 psw_mask; /* psw upper half */
- __u64 psw_addr; /* psw lower half */
-#endif
- union {
- /* KVM_EXIT_UNKNOWN */
- struct {
- __u64 hardware_exit_reason;
- } hw;
- /* KVM_EXIT_FAIL_ENTRY */
- struct {
- __u64 hardware_entry_failure_reason;
- } fail_entry;
- /* KVM_EXIT_EXCEPTION */
- struct {
- __u32 exception;
- __u32 error_code;
- } ex;
- /* KVM_EXIT_IO */
- struct {
-#define KVM_EXIT_IO_IN 0
-#define KVM_EXIT_IO_OUT 1
- __u8 direction;
- __u8 size; /* bytes */
- __u16 port;
- __u32 count;
- __u64 data_offset; /* relative to kvm_run start */
- } io;
- struct {
- struct kvm_debug_exit_arch arch;
- } debug;
- /* KVM_EXIT_MMIO */
- struct {
- __u64 phys_addr;
- __u8 data[8];
- __u32 len;
- __u8 is_write;
- } mmio;
- /* KVM_EXIT_HYPERCALL */
- struct {
- __u64 nr;
- __u64 args[6];
- __u64 ret;
- __u32 longmode;
- __u32 pad;
- } hypercall;
- /* KVM_EXIT_TPR_ACCESS */
- struct {
- __u64 rip;
- __u32 is_write;
- __u32 pad;
- } tpr_access;
- /* KVM_EXIT_S390_SIEIC */
- struct {
- __u8 icptcode;
- __u16 ipa;
- __u32 ipb;
- } s390_sieic;
- /* KVM_EXIT_S390_RESET */
-#define KVM_S390_RESET_POR 1
-#define KVM_S390_RESET_CLEAR 2
-#define KVM_S390_RESET_SUBSYSTEM 4
-#define KVM_S390_RESET_CPU_INIT 8
-#define KVM_S390_RESET_IPL 16
- __u64 s390_reset_flags;
- /* KVM_EXIT_S390_UCONTROL */
- struct {
- __u64 trans_exc_code;
- __u32 pgm_code;
- } s390_ucontrol;
- /* KVM_EXIT_DCR */
- struct {
- __u32 dcrn;
- __u32 data;
- __u8 is_write;
- } dcr;
- struct {
- __u32 suberror;
- /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
- __u32 ndata;
- __u64 data[16];
- } internal;
- /* KVM_EXIT_OSI */
- struct {
- __u64 gprs[32];
- } osi;
- struct {
- __u64 nr;
- __u64 ret;
- __u64 args[9];
- } papr_hcall;
- /* Fix the size of the union. */
- char padding[256];
- };
-
- /*
- * shared registers between kvm and userspace.
- * kvm_valid_regs specifies the register classes set by the host
- * kvm_dirty_regs specified the register classes dirtied by userspace
- * struct kvm_sync_regs is architecture specific, as well as the
- * bits for kvm_valid_regs and kvm_dirty_regs
- */
- __u64 kvm_valid_regs;
- __u64 kvm_dirty_regs;
- union {
- struct kvm_sync_regs regs;
- char padding[1024];
- } s;
-};
-
-/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
-
-struct kvm_coalesced_mmio_zone {
- __u64 addr;
- __u32 size;
- __u32 pad;
-};
-
-struct kvm_coalesced_mmio {
- __u64 phys_addr;
- __u32 len;
- __u32 pad;
- __u8 data[8];
-};
-
-struct kvm_coalesced_mmio_ring {
- __u32 first, last;
- struct kvm_coalesced_mmio coalesced_mmio[0];
-};
-
-#define KVM_COALESCED_MMIO_MAX \
- ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
- sizeof(struct kvm_coalesced_mmio))
-
-/* for KVM_TRANSLATE */
-struct kvm_translation {
- /* in */
- __u64 linear_address;
-
- /* out */
- __u64 physical_address;
- __u8 valid;
- __u8 writeable;
- __u8 usermode;
- __u8 pad[5];
-};
-
-/* for KVM_INTERRUPT */
-struct kvm_interrupt {
- /* in */
- __u32 irq;
-};
-
-/* for KVM_GET_DIRTY_LOG */
-struct kvm_dirty_log {
- __u32 slot;
- __u32 padding1;
- union {
- void __user *dirty_bitmap; /* one bit per page */
- __u64 padding2;
- };
-};
-
-/* for KVM_SET_SIGNAL_MASK */
-struct kvm_signal_mask {
- __u32 len;
- __u8 sigset[0];
-};
-
-/* for KVM_TPR_ACCESS_REPORTING */
-struct kvm_tpr_access_ctl {
- __u32 enabled;
- __u32 flags;
- __u32 reserved[8];
-};
-
-/* for KVM_SET_VAPIC_ADDR */
-struct kvm_vapic_addr {
- __u64 vapic_addr;
-};
-
-/* for KVM_SET_MPSTATE */
-
-#define KVM_MP_STATE_RUNNABLE 0
-#define KVM_MP_STATE_UNINITIALIZED 1
-#define KVM_MP_STATE_INIT_RECEIVED 2
-#define KVM_MP_STATE_HALTED 3
-#define KVM_MP_STATE_SIPI_RECEIVED 4
-
-struct kvm_mp_state {
- __u32 mp_state;
-};
-
-struct kvm_s390_psw {
- __u64 mask;
- __u64 addr;
-};
-
-/* valid values for type in kvm_s390_interrupt */
-#define KVM_S390_SIGP_STOP 0xfffe0000u
-#define KVM_S390_PROGRAM_INT 0xfffe0001u
-#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u
-#define KVM_S390_RESTART 0xfffe0003u
-#define KVM_S390_INT_VIRTIO 0xffff2603u
-#define KVM_S390_INT_SERVICE 0xffff2401u
-#define KVM_S390_INT_EMERGENCY 0xffff1201u
-#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u
-
-struct kvm_s390_interrupt {
- __u32 type;
- __u32 parm;
- __u64 parm64;
-};
-
-/* for KVM_SET_GUEST_DEBUG */
-
-#define KVM_GUESTDBG_ENABLE 0x00000001
-#define KVM_GUESTDBG_SINGLESTEP 0x00000002
-
-struct kvm_guest_debug {
- __u32 control;
- __u32 pad;
- struct kvm_guest_debug_arch arch;
-};
-
-enum {
- kvm_ioeventfd_flag_nr_datamatch,
- kvm_ioeventfd_flag_nr_pio,
- kvm_ioeventfd_flag_nr_deassign,
- kvm_ioeventfd_flag_nr_max,
-};
-
-#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
-#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio)
-#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign)
-
-#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1)
-
-struct kvm_ioeventfd {
- __u64 datamatch;
- __u64 addr; /* legal pio/mmio address */
- __u32 len; /* 1, 2, 4, or 8 bytes */
- __s32 fd;
- __u32 flags;
- __u8 pad[36];
-};
-
-/* for KVM_ENABLE_CAP */
-struct kvm_enable_cap {
- /* in */
- __u32 cap;
- __u32 flags;
- __u64 args[4];
- __u8 pad[64];
-};
-
-/* for KVM_PPC_GET_PVINFO */
-struct kvm_ppc_pvinfo {
- /* out */
- __u32 flags;
- __u32 hcall[4];
- __u8 pad[108];
-};
-
-/* for KVM_PPC_GET_SMMU_INFO */
-#define KVM_PPC_PAGE_SIZES_MAX_SZ 8
-
-struct kvm_ppc_one_page_size {
- __u32 page_shift; /* Page shift (or 0) */
- __u32 pte_enc; /* Encoding in the HPTE (>>12) */
-};
-
-struct kvm_ppc_one_seg_page_size {
- __u32 page_shift; /* Base page shift of segment (or 0) */
- __u32 slb_enc; /* SLB encoding for BookS */
- struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
-};
-
-#define KVM_PPC_PAGE_SIZES_REAL 0x00000001
-#define KVM_PPC_1T_SEGMENTS 0x00000002
-
-struct kvm_ppc_smmu_info {
- __u64 flags;
- __u32 slb_size;
- __u32 pad;
- struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
-};
-
-#define KVMIO 0xAE
-
-/* machine type bits, to be used as argument to KVM_CREATE_VM */
-#define KVM_VM_S390_UCONTROL 1
-
-#define KVM_S390_SIE_PAGE_OFFSET 1
-
-/*
- * ioctls for /dev/kvm fds:
- */
-#define KVM_GET_API_VERSION _IO(KVMIO, 0x00)
-#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */
-#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list)
-
-#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06)
-/*
- * Check if a kvm extension is available. Argument is extension number,
- * return is 1 (yes) or 0 (no, sorry).
- */
-#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03)
-/*
- * Get size for mmap(vcpu_fd)
- */
-#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */
-#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06
-#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07
-#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08
-
-/*
- * Extension capability list.
- */
-#define KVM_CAP_IRQCHIP 0
-#define KVM_CAP_HLT 1
-#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
-#define KVM_CAP_USER_MEMORY 3
-#define KVM_CAP_SET_TSS_ADDR 4
-#define KVM_CAP_VAPIC 6
-#define KVM_CAP_EXT_CPUID 7
-#define KVM_CAP_CLOCKSOURCE 8
-#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */
-#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */
-#define KVM_CAP_PIT 11
-#define KVM_CAP_NOP_IO_DELAY 12
-#define KVM_CAP_PV_MMU 13
-#define KVM_CAP_MP_STATE 14
-#define KVM_CAP_COALESCED_MMIO 15
-#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_ASSIGNMENT 17
-#endif
-#define KVM_CAP_IOMMU 18
-#ifdef __KVM_HAVE_MSI
-#define KVM_CAP_DEVICE_MSI 20
-#endif
-/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
-#ifdef __KVM_HAVE_USER_NMI
-#define KVM_CAP_USER_NMI 22
-#endif
-#ifdef __KVM_HAVE_GUEST_DEBUG
-#define KVM_CAP_SET_GUEST_DEBUG 23
-#endif
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_REINJECT_CONTROL 24
-#endif
-#ifdef __KVM_HAVE_IOAPIC
-#define KVM_CAP_IRQ_ROUTING 25
-#endif
-#define KVM_CAP_IRQ_INJECT_STATUS 26
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_DEASSIGNMENT 27
-#endif
-#ifdef __KVM_HAVE_MSIX
-#define KVM_CAP_DEVICE_MSIX 28
-#endif
-#define KVM_CAP_ASSIGN_DEV_IRQ 29
-/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
-#ifdef __KVM_HAVE_MCE
-#define KVM_CAP_MCE 31
-#endif
-#define KVM_CAP_IRQFD 32
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_PIT2 33
-#endif
-#define KVM_CAP_SET_BOOT_CPU_ID 34
-#ifdef __KVM_HAVE_PIT_STATE2
-#define KVM_CAP_PIT_STATE2 35
-#endif
-#define KVM_CAP_IOEVENTFD 36
-#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
-#ifdef __KVM_HAVE_XEN_HVM
-#define KVM_CAP_XEN_HVM 38
-#endif
-#define KVM_CAP_ADJUST_CLOCK 39
-#define KVM_CAP_INTERNAL_ERROR_DATA 40
-#ifdef __KVM_HAVE_VCPU_EVENTS
-#define KVM_CAP_VCPU_EVENTS 41
-#endif
-#define KVM_CAP_S390_PSW 42
-#define KVM_CAP_PPC_SEGSTATE 43
-#define KVM_CAP_HYPERV 44
-#define KVM_CAP_HYPERV_VAPIC 45
-#define KVM_CAP_HYPERV_SPIN 46
-#define KVM_CAP_PCI_SEGMENT 47
-#define KVM_CAP_PPC_PAIRED_SINGLES 48
-#define KVM_CAP_INTR_SHADOW 49
-#ifdef __KVM_HAVE_DEBUGREGS
-#define KVM_CAP_DEBUGREGS 50
-#endif
-#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
-#define KVM_CAP_PPC_OSI 52
-#define KVM_CAP_PPC_UNSET_IRQ 53
-#define KVM_CAP_ENABLE_CAP 54
-#ifdef __KVM_HAVE_XSAVE
-#define KVM_CAP_XSAVE 55
-#endif
-#ifdef __KVM_HAVE_XCRS
-#define KVM_CAP_XCRS 56
-#endif
-#define KVM_CAP_PPC_GET_PVINFO 57
-#define KVM_CAP_PPC_IRQ_LEVEL 58
-#define KVM_CAP_ASYNC_PF 59
-#define KVM_CAP_TSC_CONTROL 60
-#define KVM_CAP_GET_TSC_KHZ 61
-#define KVM_CAP_PPC_BOOKE_SREGS 62
-#define KVM_CAP_SPAPR_TCE 63
-#define KVM_CAP_PPC_SMT 64
-#define KVM_CAP_PPC_RMA 65
-#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
-#define KVM_CAP_PPC_PAPR 68
-#define KVM_CAP_SW_TLB 69
-#define KVM_CAP_ONE_REG 70
-#define KVM_CAP_S390_GMAP 71
-#define KVM_CAP_TSC_DEADLINE_TIMER 72
-#define KVM_CAP_S390_UCONTROL 73
-#define KVM_CAP_SYNC_REGS 74
-#define KVM_CAP_PCI_2_3 75
-#define KVM_CAP_KVMCLOCK_CTRL 76
-#define KVM_CAP_SIGNAL_MSI 77
-#define KVM_CAP_PPC_GET_SMMU_INFO 78
-#define KVM_CAP_S390_COW 79
-#define KVM_CAP_PPC_ALLOC_HTAB 80
-#ifdef __KVM_HAVE_READONLY_MEM
-#define KVM_CAP_READONLY_MEM 81
-#endif
-#define KVM_CAP_IRQFD_RESAMPLE 82
-
-#ifdef KVM_CAP_IRQ_ROUTING
-
-struct kvm_irq_routing_irqchip {
- __u32 irqchip;
- __u32 pin;
-};
-
-struct kvm_irq_routing_msi {
- __u32 address_lo;
- __u32 address_hi;
- __u32 data;
- __u32 pad;
-};
-
-/* gsi routing entry types */
-#define KVM_IRQ_ROUTING_IRQCHIP 1
-#define KVM_IRQ_ROUTING_MSI 2
-
-struct kvm_irq_routing_entry {
- __u32 gsi;
- __u32 type;
- __u32 flags;
- __u32 pad;
- union {
- struct kvm_irq_routing_irqchip irqchip;
- struct kvm_irq_routing_msi msi;
- __u32 pad[8];
- } u;
-};
-
-struct kvm_irq_routing {
- __u32 nr;
- __u32 flags;
- struct kvm_irq_routing_entry entries[0];
-};
-
-#endif
-
-#ifdef KVM_CAP_MCE
-/* x86 MCE */
-struct kvm_x86_mce {
- __u64 status;
- __u64 addr;
- __u64 misc;
- __u64 mcg_status;
- __u8 bank;
- __u8 pad1[7];
- __u64 pad2[3];
-};
-#endif
-
-#ifdef KVM_CAP_XEN_HVM
-struct kvm_xen_hvm_config {
- __u32 flags;
- __u32 msr;
- __u64 blob_addr_32;
- __u64 blob_addr_64;
- __u8 blob_size_32;
- __u8 blob_size_64;
- __u8 pad2[30];
-};
-#endif
-
-#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
-/*
- * Available with KVM_CAP_IRQFD_RESAMPLE
- *
- * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
- * the irqfd to operate in resampling mode for level triggered interrupt
- * emlation. See Documentation/virtual/kvm/api.txt.
- */
-#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
-
-struct kvm_irqfd {
- __u32 fd;
- __u32 gsi;
- __u32 flags;
- __u32 resamplefd;
- __u8 pad[16];
-};
-
-struct kvm_clock_data {
- __u64 clock;
- __u32 flags;
- __u32 pad[9];
-};
-
-#define KVM_MMU_FSL_BOOKE_NOHV 0
-#define KVM_MMU_FSL_BOOKE_HV 1
-
-struct kvm_config_tlb {
- __u64 params;
- __u64 array;
- __u32 mmu_type;
- __u32 array_len;
-};
-
-struct kvm_dirty_tlb {
- __u64 bitmap;
- __u32 num_dirty;
-};
-
-/* Available with KVM_CAP_ONE_REG */
-
-#define KVM_REG_ARCH_MASK 0xff00000000000000ULL
-#define KVM_REG_GENERIC 0x0000000000000000ULL
-
-/*
- * Architecture specific registers are to be defined in arch headers and
- * ORed with the arch identifier.
- */
-#define KVM_REG_PPC 0x1000000000000000ULL
-#define KVM_REG_X86 0x2000000000000000ULL
-#define KVM_REG_IA64 0x3000000000000000ULL
-#define KVM_REG_ARM 0x4000000000000000ULL
-#define KVM_REG_S390 0x5000000000000000ULL
-
-#define KVM_REG_SIZE_SHIFT 52
-#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL
-#define KVM_REG_SIZE_U8 0x0000000000000000ULL
-#define KVM_REG_SIZE_U16 0x0010000000000000ULL
-#define KVM_REG_SIZE_U32 0x0020000000000000ULL
-#define KVM_REG_SIZE_U64 0x0030000000000000ULL
-#define KVM_REG_SIZE_U128 0x0040000000000000ULL
-#define KVM_REG_SIZE_U256 0x0050000000000000ULL
-#define KVM_REG_SIZE_U512 0x0060000000000000ULL
-#define KVM_REG_SIZE_U1024 0x0070000000000000ULL
-
-struct kvm_one_reg {
- __u64 id;
- __u64 addr;
-};
-
-struct kvm_msi {
- __u32 address_lo;
- __u32 address_hi;
- __u32 data;
- __u32 flags;
- __u8 pad[16];
-};
-
-/*
- * ioctls for VM fds
- */
-#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region)
-/*
- * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
- * a vcpu fd.
- */
-#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
-#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
-/* KVM_SET_MEMORY_ALIAS is obsolete: */
-#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
-#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44)
-#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45)
-#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
- struct kvm_userspace_memory_region)
-#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47)
-#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
-
-/* enable ucontrol for s390 */
-struct kvm_s390_ucas_mapping {
- __u64 user_addr;
- __u64 vcpu_addr;
- __u64 length;
-};
-#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
-#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
-#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long)
-
-/* Device model IOC */
-#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
-#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
-#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip)
-#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip)
-#define KVM_CREATE_PIT _IO(KVMIO, 0x64)
-#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state)
-#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state)
-#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level)
-#define KVM_REGISTER_COALESCED_MMIO \
- _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone)
-#define KVM_UNREGISTER_COALESCED_MMIO \
- _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
- struct kvm_assigned_pci_dev)
-#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
-/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70
-#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
-#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71)
-#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
- struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \
- struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \
- struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
-#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd)
-#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config)
-#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78)
-#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
-#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config)
-#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data)
-#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data)
-/* Available with KVM_CAP_PIT_STATE2 */
-#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2)
-#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
-/* Available with KVM_CAP_PPC_GET_PVINFO */
-#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo)
-/* Available with KVM_CAP_TSC_CONTROL */
-#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2)
-#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3)
-/* Available with KVM_CAP_PCI_2_3 */
-#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \
- struct kvm_assigned_pci_dev)
-/* Available with KVM_CAP_SIGNAL_MSI */
-#define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi)
-/* Available with KVM_CAP_PPC_GET_SMMU_INFO */
-#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info)
-/* Available with KVM_CAP_PPC_ALLOC_HTAB */
-#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32)
-
-/*
- * ioctls for vcpu fds
- */
-#define KVM_RUN _IO(KVMIO, 0x80)
-#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs)
-#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs)
-#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs)
-#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs)
-#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation)
-#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt)
-/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87
-#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs)
-#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs)
-#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid)
-#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask)
-#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu)
-#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu)
-#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state)
-#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state)
-#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2)
-#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr)
-/* valid for virtual machine (for floating interrupt)_and_ vcpu */
-#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt)
-/* store status for s390 */
-#define KVM_S390_STORE_STATUS_NOADDR (-1ul)
-#define KVM_S390_STORE_STATUS_PREFIXED (-2ul)
-#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long)
-/* initial ipl psw for s390 */
-#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw)
-/* initial reset for s390 */
-#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97)
-#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state)
-#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state)
-/* Available with KVM_CAP_NMI */
-#define KVM_NMI _IO(KVMIO, 0x9a)
-/* Available with KVM_CAP_SET_GUEST_DEBUG */
-#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug)
-/* MCE for x86 */
-#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64)
-#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64)
-#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce)
-/* IA64 stack access */
-#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *)
-#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *)
-/* Available with KVM_CAP_VCPU_EVENTS */
-#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events)
-#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events)
-/* Available with KVM_CAP_DEBUGREGS */
-#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs)
-#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs)
-#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap)
-/* Available with KVM_CAP_XSAVE */
-#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave)
-#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave)
-/* Available with KVM_CAP_XCRS */
-#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs)
-#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs)
-#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce)
-/* Available with KVM_CAP_RMA */
-#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma)
-/* Available with KVM_CAP_SW_TLB */
-#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb)
-/* Available with KVM_CAP_ONE_REG */
-#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg)
-#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg)
-/* VM is being stopped by host */
-#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad)
-
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
-#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
-#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
-
-struct kvm_assigned_pci_dev {
- __u32 assigned_dev_id;
- __u32 busnr;
- __u32 devfn;
- __u32 flags;
- __u32 segnr;
- union {
- __u32 reserved[11];
- };
-};
-
-#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
-#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
-#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
-
-#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
-#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
-#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
-
-#define KVM_DEV_IRQ_HOST_MASK 0x00ff
-#define KVM_DEV_IRQ_GUEST_MASK 0xff00
-
-struct kvm_assigned_irq {
- __u32 assigned_dev_id;
- __u32 host_irq; /* ignored (legacy field) */
- __u32 guest_irq;
- __u32 flags;
- union {
- __u32 reserved[12];
- };
-};
-
-struct kvm_assigned_msix_nr {
- __u32 assigned_dev_id;
- __u16 entry_nr;
- __u16 padding;
-};
-
-#define KVM_MAX_MSIX_PER_DEV 256
-struct kvm_assigned_msix_entry {
- __u32 assigned_dev_id;
- __u32 gsi;
- __u16 entry; /* The index of entry in the MSI-X table */
- __u16 padding[3];
-};
-
-#endif /* __LINUX_KVM_H */
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index ff476dd..00a97bb 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -1,31 +1,8 @@
#ifndef __LINUX_KVM_PARA_H
#define __LINUX_KVM_PARA_H
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
+#include <uapi/linux/kvm_para.h>
-/* Return values for hypercalls */
-#define KVM_ENOSYS 1000
-#define KVM_EFAULT EFAULT
-#define KVM_E2BIG E2BIG
-#define KVM_EPERM EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ 1
-#define KVM_HC_MMU_OP 2
-#define KVM_HC_FEATURES 3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
static inline int kvm_para_has_feature(unsigned int feature)
{
@@ -33,5 +10,4 @@ static inline int kvm_para_has_feature(unsigned int feature)
return 1;
return 0;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 7eab668..bffdb96 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -3,181 +3,11 @@
*
* Author: James Chapman <jchapman@katalix.com>
*/
-
#ifndef _LINUX_L2TP_H_
#define _LINUX_L2TP_H_
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/in6.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP 115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family: address family number AF_L2TPIP.
- * @l2tp_addr: protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
-struct sockaddr_l2tpip {
- /* The first fields must match struct sockaddr_in */
- __kernel_sa_family_t l2tp_family; /* AF_INET */
- __be16 l2tp_unused; /* INET port number (unused) */
- struct in_addr l2tp_addr; /* Internet address */
-
- __u32 l2tp_conn_id; /* Connection ID of tunnel */
-
- /* Pad to size of `struct sockaddr'. */
- unsigned char __pad[sizeof(struct sockaddr) -
- sizeof(__kernel_sa_family_t) -
- sizeof(__be16) - sizeof(struct in_addr) -
- sizeof(__u32)];
-};
-
-/**
- * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
- * @l2tp_family: address family number AF_L2TPIP.
- * @l2tp_addr: protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-struct sockaddr_l2tpip6 {
- /* The first fields must match struct sockaddr_in6 */
- __kernel_sa_family_t l2tp_family; /* AF_INET6 */
- __be16 l2tp_unused; /* INET port number (unused) */
- __be32 l2tp_flowinfo; /* IPv6 flow information */
- struct in6_addr l2tp_addr; /* IPv6 address */
- __u32 l2tp_scope_id; /* scope id (new in RFC2553) */
- __u32 l2tp_conn_id; /* Connection ID of tunnel */
-};
-
-/*****************************************************************************
- * NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE - CONN_ID
- * TUNNEL_MODIFY - CONN_ID, udpcsum
- * TUNNEL_GETSTATS - CONN_ID, (stats)
- * TUNNEL_GET - CONN_ID, (...)
- * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE - SESSION_ID
- * SESSION_MODIFY - SESSION_ID, data_seq
- * SESSION_GET - SESSION_ID, (...)
- * SESSION_GETSTATS - SESSION_ID, (stats)
- *
- */
-enum {
- L2TP_CMD_NOOP,
- L2TP_CMD_TUNNEL_CREATE,
- L2TP_CMD_TUNNEL_DELETE,
- L2TP_CMD_TUNNEL_MODIFY,
- L2TP_CMD_TUNNEL_GET,
- L2TP_CMD_SESSION_CREATE,
- L2TP_CMD_SESSION_DELETE,
- L2TP_CMD_SESSION_MODIFY,
- L2TP_CMD_SESSION_GET,
- __L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
- L2TP_ATTR_NONE, /* no data */
- L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */
- L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */
- L2TP_ATTR_OFFSET, /* u16 */
- L2TP_ATTR_DATA_SEQ, /* u16 */
- L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */
- L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */
- L2TP_ATTR_PROTO_VERSION, /* u8 */
- L2TP_ATTR_IFNAME, /* string */
- L2TP_ATTR_CONN_ID, /* u32 */
- L2TP_ATTR_PEER_CONN_ID, /* u32 */
- L2TP_ATTR_SESSION_ID, /* u32 */
- L2TP_ATTR_PEER_SESSION_ID, /* u32 */
- L2TP_ATTR_UDP_CSUM, /* u8 */
- L2TP_ATTR_VLAN_ID, /* u16 */
- L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */
- L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */
- L2TP_ATTR_DEBUG, /* u32 */
- L2TP_ATTR_RECV_SEQ, /* u8 */
- L2TP_ATTR_SEND_SEQ, /* u8 */
- L2TP_ATTR_LNS_MODE, /* u8 */
- L2TP_ATTR_USING_IPSEC, /* u8 */
- L2TP_ATTR_RECV_TIMEOUT, /* msec */
- L2TP_ATTR_FD, /* int */
- L2TP_ATTR_IP_SADDR, /* u32 */
- L2TP_ATTR_IP_DADDR, /* u32 */
- L2TP_ATTR_UDP_SPORT, /* u16 */
- L2TP_ATTR_UDP_DPORT, /* u16 */
- L2TP_ATTR_MTU, /* u16 */
- L2TP_ATTR_MRU, /* u16 */
- L2TP_ATTR_STATS, /* nested */
- L2TP_ATTR_IP6_SADDR, /* struct in6_addr */
- L2TP_ATTR_IP6_DADDR, /* struct in6_addr */
- __L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
- L2TP_ATTR_STATS_NONE, /* no data */
- L2TP_ATTR_TX_PACKETS, /* u64 */
- L2TP_ATTR_TX_BYTES, /* u64 */
- L2TP_ATTR_TX_ERRORS, /* u64 */
- L2TP_ATTR_RX_PACKETS, /* u64 */
- L2TP_ATTR_RX_BYTES, /* u64 */
- L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */
- L2TP_ATTR_RX_OOS_PACKETS, /* u64 */
- L2TP_ATTR_RX_ERRORS, /* u64 */
- __L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
- L2TP_PWTYPE_NONE = 0x0000,
- L2TP_PWTYPE_ETH_VLAN = 0x0004,
- L2TP_PWTYPE_ETH = 0x0005,
- L2TP_PWTYPE_PPP = 0x0007,
- L2TP_PWTYPE_PPP_AC = 0x0008,
- L2TP_PWTYPE_IP = 0x000b,
- __L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
- L2TP_L2SPECTYPE_NONE,
- L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
- L2TP_ENCAPTYPE_UDP,
- L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
- L2TP_SEQ_NONE = 0,
- L2TP_SEQ_IP = 1,
- L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME "l2tp"
-#define L2TP_GENL_VERSION 0x1
+#include <uapi/linux/l2tp.h>
#endif
diff --git a/include/linux/limits.h b/include/linux/limits.h
deleted file mode 100644
index 2d0f941..0000000
--- a/include/linux/limits.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_LIMITS_H
-#define _LINUX_LIMITS_H
-
-#define NR_OPEN 1024
-
-#define NGROUPS_MAX 65536 /* supplemental group IDs are available */
-#define ARG_MAX 131072 /* # bytes of args + environ for exec() */
-#define LINK_MAX 127 /* # links a file may have */
-#define MAX_CANON 255 /* size of the canonical input queue */
-#define MAX_INPUT 255 /* size of the type-ahead buffer */
-#define NAME_MAX 255 /* # chars in a file name */
-#define PATH_MAX 4096 /* # chars in a path name including nul */
-#define PIPE_BUF 4096 /* # bytes in atomic write to a pipe */
-#define XATTR_NAME_MAX 255 /* # chars in an extended attribute name */
-#define XATTR_SIZE_MAX 65536 /* size of an extended attribute value (64k) */
-#define XATTR_LIST_MAX 65536 /* size of extended attribute namelist (64k) */
-
-#define RTSIG_MAX 32
-
-#endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
index a2418ae..b965314 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -1,5 +1,3 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
/*
* IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
*
@@ -12,80 +10,14 @@
*
* See the GNU General Public License for more details.
*/
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
-#include <linux/socket.h>
-
-#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
- __kernel_sa_family_t sllc_family; /* AF_LLC */
- __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
- unsigned char sllc_test;
- unsigned char sllc_xid;
- unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */
- unsigned char sllc_sap;
- unsigned char sllc_mac[IFHWADDRLEN];
- unsigned char __pad[__LLC_SOCK_SIZE__ -
- sizeof(__kernel_sa_family_t) * 2 -
- sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
- LLC_OPT_UNKNOWN = 0,
- LLC_OPT_RETRY, /* max retrans attempts. */
- LLC_OPT_SIZE, /* max PDU size (octets). */
- LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */
- LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */
- LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */
- LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */
- LLC_OPT_TX_WIN, /* tx window size. */
- LLC_OPT_RX_WIN, /* rx window size. */
- LLC_OPT_PKTINFO, /* ancillary packet information. */
- LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY 100
-#define LLC_OPT_MAX_SIZE 4196
-#define LLC_OPT_MAX_WIN 127
-#define LLC_OPT_MAX_ACK_TMR_EXP 60
-#define LLC_OPT_MAX_P_TMR_EXP 60
-#define LLC_OPT_MAX_REJ_TMR_EXP 60
-#define LLC_OPT_MAX_BUSY_TMR_EXP 60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL 0x00 /* NULL SAP. */
-#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */
-#define LLC_SAP_SNA 0x04 /* SNA Path Control. */
-#define LLC_SAP_PNM 0x0E /* Proway Network Management. */
-#define LLC_SAP_IP 0x06 /* TCP/IP. */
-#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */
-#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */
-#define LLC_SAP_8208 0x7E /* ISO 8208 */
-#define LLC_SAP_3COM 0x80 /* 3COM. */
-#define LLC_SAP_PRO 0x8E /* Proway Active Station List */
-#define LLC_SAP_SNAP 0xAA /* SNAP. */
-#define LLC_SAP_BANYAN 0xBC /* Banyan. */
-#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */
-#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */
-#define LLC_SAP_LANMGR 0xF4 /* LanManager. */
-#define LLC_SAP_IMPL 0xF8 /* IMPL */
-#define LLC_SAP_DISC 0xFC /* Discovery */
-#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */
-#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */
-#define LLC_SAP_RM 0xD4 /* Resource Management */
-#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */
-
-struct llc_pktinfo {
- int lpi_ifindex;
- unsigned char lpi_sap;
- unsigned char lpi_mac[IFHWADDRLEN];
-};
+#include <uapi/linux/llc.h>
-#ifdef __KERNEL__
#define LLC_SAP_DYN_START 0xC0
#define LLC_SAP_DYN_STOP 0xDE
#define LLC_SAP_DYN_TRIES 4
#define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
#endif /* __LINUX_LLC_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 9635116..6492181 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
/*
* include/linux/loop.h
*
@@ -9,15 +6,14 @@
* Copyright 1993 by Theodore Ts'o. Redistribution of this file is
* permitted under the GNU General Public License.
*/
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
-#define LO_NAME_SIZE 64
-#define LO_KEY_SIZE 32
-
-#ifdef __KERNEL__
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <uapi/linux/loop.h>
/* Possible states of device */
enum {
@@ -66,69 +62,6 @@ struct loop_device {
struct gendisk *lo_disk;
};
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
- LO_FLAGS_READ_ONLY = 1,
- LO_FLAGS_AUTOCLEAR = 4,
- LO_FLAGS_PARTSCAN = 8,
-};
-
-#include <asm/posix_types.h> /* for __kernel_old_dev_t */
-#include <linux/types.h> /* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
- int lo_number; /* ioctl r/o */
- __kernel_old_dev_t lo_device; /* ioctl r/o */
- unsigned long lo_inode; /* ioctl r/o */
- __kernel_old_dev_t lo_rdevice; /* ioctl r/o */
- int lo_offset;
- int lo_encrypt_type;
- int lo_encrypt_key_size; /* ioctl w/o */
- int lo_flags; /* ioctl r/o */
- char lo_name[LO_NAME_SIZE];
- unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- unsigned long lo_init[2];
- char reserved[4];
-};
-
-struct loop_info64 {
- __u64 lo_device; /* ioctl r/o */
- __u64 lo_inode; /* ioctl r/o */
- __u64 lo_rdevice; /* ioctl r/o */
- __u64 lo_offset;
- __u64 lo_sizelimit;/* bytes, 0 == max available */
- __u32 lo_number; /* ioctl r/o */
- __u32 lo_encrypt_type;
- __u32 lo_encrypt_key_size; /* ioctl w/o */
- __u32 lo_flags; /* ioctl r/o */
- __u8 lo_file_name[LO_NAME_SIZE];
- __u8 lo_crypt_name[LO_NAME_SIZE];
- __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- __u64 lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE 0
-#define LO_CRYPT_XOR 1
-#define LO_CRYPT_DES 2
-#define LO_CRYPT_FISH2 3 /* Twofish encryption */
-#define LO_CRYPT_BLOW 4
-#define LO_CRYPT_CAST128 5
-#define LO_CRYPT_IDEA 6
-#define LO_CRYPT_DUMMY 9
-#define LO_CRYPT_SKIPJACK 10
-#define LO_CRYPT_CRYPTOAPI 18
-#define MAX_LO_CRYPT 20
-
-#ifdef __KERNEL__
/* Support for loadable transfer modules */
struct loop_func_table {
int number; /* filter type */
@@ -147,21 +80,3 @@ int loop_register_transfer(struct loop_func_table *funcs);
int loop_unregister_transfer(int number);
#endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD 0x4C00
-#define LOOP_CLR_FD 0x4C01
-#define LOOP_SET_STATUS 0x4C02
-#define LOOP_GET_STATUS 0x4C03
-#define LOOP_SET_STATUS64 0x4C04
-#define LOOP_GET_STATUS64 0x4C05
-#define LOOP_CHANGE_FD 0x4C06
-#define LOOP_SET_CAPACITY 0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD 0x4C80
-#define LOOP_CTL_REMOVE 0x4C81
-#define LOOP_CTL_GET_FREE 0x4C82
-#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
index 0df024b..0dd276a 100644
--- a/include/linux/lp.h
+++ b/include/linux/lp.h
@@ -1,105 +1,16 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
/*
* usr/include/linux/lp.h c.1991-1992 James Wiegand
* many modifications copyright (C) 1992 Michael K. Johnson
* Interrupt support added 1993 Nigel Gamble
* Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti
*/
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL 0x0008
-#define LP_NOPA 0x0010
-#define LP_ERR 0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_ 0x0200 /* obsolete */
-#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL 0x0800 /* Data is available. */
-
-/*
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY 0x80 /* inverted input, active high */
-#define LP_PACK 0x40 /* unchanged input, active low */
-#define LP_POUTPA 0x20 /* unchanged input, active high */
-#define LP_PSELECD 0x10 /* unchanged input, active high */
-#define LP_PERRORP 0x08 /* unchanged input, active low */
-
-/* timeout for each character. This is relative to bus cycles -- it
- * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print. If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number. This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled. If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */
-#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */
-#define LPABORT 0x0604 /* call with TRUE arg to abort on error,
- FALSE to retry. Default is retry. */
-#define LPSETIRQ 0x0605 /* call with new IRQ number,
- or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606 /* get the current IRQ number */
-#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off-
- line, and error indicators good on all writes,
- FALSE to ignore them. Default is ignore. */
-#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error,
- FALSE to ignore error. Default is ignore. */
-#define LPGETSTATUS 0x060b /* return LP_S(minor) */
-#define LPRESET 0x060c /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS 0x060e /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
- This is also used for re-checking error conditions if LP_ABORT is
- not set. This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT (60 * HZ)
-#define LP_TIMEOUT_POLLED (10 * HZ)
-
-#ifdef __KERNEL__
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <uapi/linux/lp.h>
/* Magic numbers for defining port-device mappings */
#define LP_PARPORT_UNSPEC -4
@@ -187,5 +98,3 @@ struct lp_struct {
#define LP_DELAY 50
#endif
-
-#endif
diff --git a/include/linux/magic.h b/include/linux/magic.h
deleted file mode 100644
index e15192c..0000000
--- a/include/linux/magic.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_MAGIC_H__
-#define __LINUX_MAGIC_H__
-
-#define ADFS_SUPER_MAGIC 0xadf5
-#define AFFS_SUPER_MAGIC 0xadff
-#define AFS_SUPER_MAGIC 0x5346414F
-#define AUTOFS_SUPER_MAGIC 0x0187
-#define CODA_SUPER_MAGIC 0x73757245
-#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */
-#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */
-#define DEBUGFS_MAGIC 0x64626720
-#define SECURITYFS_MAGIC 0x73636673
-#define SELINUX_MAGIC 0xf97cff8c
-#define RAMFS_MAGIC 0x858458f6 /* some random number */
-#define TMPFS_MAGIC 0x01021994
-#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */
-#define SQUASHFS_MAGIC 0x73717368
-#define ECRYPTFS_SUPER_MAGIC 0xf15f
-#define EFS_SUPER_MAGIC 0x414A53
-#define EXT2_SUPER_MAGIC 0xEF53
-#define EXT3_SUPER_MAGIC 0xEF53
-#define XENFS_SUPER_MAGIC 0xabba1974
-#define EXT4_SUPER_MAGIC 0xEF53
-#define BTRFS_SUPER_MAGIC 0x9123683E
-#define NILFS_SUPER_MAGIC 0x3434
-#define HPFS_SUPER_MAGIC 0xf995e849
-#define ISOFS_SUPER_MAGIC 0x9660
-#define JFFS2_SUPER_MAGIC 0x72b6
-#define PSTOREFS_MAGIC 0x6165676C
-
-#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */
-#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */
-#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */
-#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */
-#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */
-
-#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */
-#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */
-#define NFS_SUPER_MAGIC 0x6969
-#define OPENPROM_SUPER_MAGIC 0x9fa1
-#define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */
-#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */
-
-#define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */
- /* used by file system utilities that
- look at the superblock, etc. */
-#define REISERFS_SUPER_MAGIC_STRING "ReIsErFs"
-#define REISER2FS_SUPER_MAGIC_STRING "ReIsEr2Fs"
-#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs"
-
-#define SMB_SUPER_MAGIC 0x517B
-#define CGROUP_SUPER_MAGIC 0x27e0eb
-
-
-#define STACK_END_MAGIC 0x57AC6E9D
-
-#define V9FS_MAGIC 0x01021997
-
-#define BDEVFS_MAGIC 0x62646576
-#define BINFMTFS_MAGIC 0x42494e4d
-#define DEVPTS_SUPER_MAGIC 0x1cd1
-#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA
-#define PIPEFS_MAGIC 0x50495045
-#define PROC_SUPER_MAGIC 0x9fa0
-#define SOCKFS_MAGIC 0x534F434B
-#define SYSFS_MAGIC 0x62656572
-#define USBDEVICE_SUPER_MAGIC 0x9fa2
-#define MTD_INODE_FS_MAGIC 0x11307854
-#define ANON_INODE_FS_MAGIC 0x09041934
-
-
-#endif /* __LINUX_MAGIC_H__ */
diff --git a/include/linux/major.h b/include/linux/major.h
deleted file mode 100644
index 6a8ca98..0000000
--- a/include/linux/major.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _LINUX_MAJOR_H
-#define _LINUX_MAJOR_H
-
-/*
- * This file has definitions for major device numbers.
- * For the device number assignments, see Documentation/devices.txt.
- */
-
-#define UNNAMED_MAJOR 0
-#define MEM_MAJOR 1
-#define RAMDISK_MAJOR 1
-#define FLOPPY_MAJOR 2
-#define PTY_MASTER_MAJOR 2
-#define IDE0_MAJOR 3
-#define HD_MAJOR IDE0_MAJOR
-#define PTY_SLAVE_MAJOR 3
-#define TTY_MAJOR 4
-#define TTYAUX_MAJOR 5
-#define LP_MAJOR 6
-#define VCS_MAJOR 7
-#define LOOP_MAJOR 7
-#define SCSI_DISK0_MAJOR 8
-#define SCSI_TAPE_MAJOR 9
-#define MD_MAJOR 9
-#define MISC_MAJOR 10
-#define SCSI_CDROM_MAJOR 11
-#define MUX_MAJOR 11 /* PA-RISC only */
-#define XT_DISK_MAJOR 13
-#define INPUT_MAJOR 13
-#define SOUND_MAJOR 14
-#define CDU31A_CDROM_MAJOR 15
-#define JOYSTICK_MAJOR 15
-#define GOLDSTAR_CDROM_MAJOR 16
-#define OPTICS_CDROM_MAJOR 17
-#define SANYO_CDROM_MAJOR 18
-#define CYCLADES_MAJOR 19
-#define CYCLADESAUX_MAJOR 20
-#define MITSUMI_X_CDROM_MAJOR 20
-#define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */
-#define SCSI_GENERIC_MAJOR 21
-#define IDE1_MAJOR 22
-#define DIGICU_MAJOR 22
-#define DIGI_MAJOR 23
-#define MITSUMI_CDROM_MAJOR 23
-#define CDU535_CDROM_MAJOR 24
-#define STL_SERIALMAJOR 24
-#define MATSUSHITA_CDROM_MAJOR 25
-#define STL_CALLOUTMAJOR 25
-#define MATSUSHITA_CDROM2_MAJOR 26
-#define QIC117_TAPE_MAJOR 27
-#define MATSUSHITA_CDROM3_MAJOR 27
-#define MATSUSHITA_CDROM4_MAJOR 28
-#define STL_SIOMEMMAJOR 28
-#define ACSI_MAJOR 28
-#define AZTECH_CDROM_MAJOR 29
-#define FB_MAJOR 29 /* /dev/fb* framebuffers */
-#define CM206_CDROM_MAJOR 32
-#define IDE2_MAJOR 33
-#define IDE3_MAJOR 34
-#define Z8530_MAJOR 34
-#define XPRAM_MAJOR 35 /* Expanded storage on S/390: "slow ram"*/
-#define NETLINK_MAJOR 36
-#define PS2ESDI_MAJOR 36
-#define IDETAPE_MAJOR 37
-#define Z2RAM_MAJOR 37
-#define APBLOCK_MAJOR 38 /* AP1000 Block device */
-#define DDV_MAJOR 39 /* AP1000 DDV block device */
-#define NBD_MAJOR 43 /* Network block device */
-#define RISCOM8_NORMAL_MAJOR 48
-#define DAC960_MAJOR 48 /* 48..55 */
-#define RISCOM8_CALLOUT_MAJOR 49
-#define MKISS_MAJOR 55
-#define DSP56K_MAJOR 55 /* DSP56001 processor device */
-
-#define IDE4_MAJOR 56
-#define IDE5_MAJOR 57
-
-#define SCSI_DISK1_MAJOR 65
-#define SCSI_DISK2_MAJOR 66
-#define SCSI_DISK3_MAJOR 67
-#define SCSI_DISK4_MAJOR 68
-#define SCSI_DISK5_MAJOR 69
-#define SCSI_DISK6_MAJOR 70
-#define SCSI_DISK7_MAJOR 71
-
-#define COMPAQ_SMART2_MAJOR 72
-#define COMPAQ_SMART2_MAJOR1 73
-#define COMPAQ_SMART2_MAJOR2 74
-#define COMPAQ_SMART2_MAJOR3 75
-#define COMPAQ_SMART2_MAJOR4 76
-#define COMPAQ_SMART2_MAJOR5 77
-#define COMPAQ_SMART2_MAJOR6 78
-#define COMPAQ_SMART2_MAJOR7 79
-
-#define SPECIALIX_NORMAL_MAJOR 75
-#define SPECIALIX_CALLOUT_MAJOR 76
-
-#define AURORA_MAJOR 79
-
-#define I2O_MAJOR 80 /* 80->87 */
-
-#define SHMIQ_MAJOR 85 /* Linux/mips, SGI /dev/shmiq */
-#define SCSI_CHANGER_MAJOR 86
-
-#define IDE6_MAJOR 88
-#define IDE7_MAJOR 89
-#define IDE8_MAJOR 90
-#define IDE9_MAJOR 91
-
-#define DASD_MAJOR 94
-
-#define MDISK_MAJOR 95
-
-#define UBD_MAJOR 98
-
-#define PP_MAJOR 99
-#define JSFD_MAJOR 99
-
-#define PHONE_MAJOR 100
-
-#define COMPAQ_CISS_MAJOR 104
-#define COMPAQ_CISS_MAJOR1 105
-#define COMPAQ_CISS_MAJOR2 106
-#define COMPAQ_CISS_MAJOR3 107
-#define COMPAQ_CISS_MAJOR4 108
-#define COMPAQ_CISS_MAJOR5 109
-#define COMPAQ_CISS_MAJOR6 110
-#define COMPAQ_CISS_MAJOR7 111
-
-#define VIODASD_MAJOR 112
-#define VIOCD_MAJOR 113
-
-#define ATARAID_MAJOR 114
-
-#define SCSI_DISK8_MAJOR 128
-#define SCSI_DISK9_MAJOR 129
-#define SCSI_DISK10_MAJOR 130
-#define SCSI_DISK11_MAJOR 131
-#define SCSI_DISK12_MAJOR 132
-#define SCSI_DISK13_MAJOR 133
-#define SCSI_DISK14_MAJOR 134
-#define SCSI_DISK15_MAJOR 135
-
-#define UNIX98_PTY_MASTER_MAJOR 128
-#define UNIX98_PTY_MAJOR_COUNT 8
-#define UNIX98_PTY_SLAVE_MAJOR (UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
-
-#define DRBD_MAJOR 147
-#define RTF_MAJOR 150
-#define RAW_MAJOR 162
-
-#define USB_ACM_MAJOR 166
-#define USB_ACM_AUX_MAJOR 167
-#define USB_CHAR_MAJOR 180
-
-#define MMC_BLOCK_MAJOR 179
-
-#define VXVM_MAJOR 199 /* VERITAS volume i/o driver */
-#define VXSPEC_MAJOR 200 /* VERITAS volume config driver */
-#define VXDMP_MAJOR 201 /* VERITAS volume multipath driver */
-
-#define XENVBD_MAJOR 202 /* Xen virtual block device */
-
-#define MSR_MAJOR 202
-#define CPUID_MAJOR 203
-
-#define OSST_MAJOR 206 /* OnStream-SCx0 SCSI tape */
-
-#define IBM_TTY3270_MAJOR 227
-#define IBM_FS3270_MAJOR 228
-
-#define VIOTAPE_MAJOR 230
-
-#define BLOCK_EXT_MAJOR 259
-#define SCSI_OSD_MAJOR 260 /* open-osd's OSD scsi device */
-
-#endif
diff --git a/include/linux/map_to_7segment.h b/include/linux/map_to_7segment.h
deleted file mode 100644
index 12d62a5..0000000
--- a/include/linux/map_to_7segment.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef MAP_TO_7SEGMENT_H
-#define MAP_TO_7SEGMENT_H
-
-/* This file provides translation primitives and tables for the conversion
- * of (ASCII) characters to a 7-segments notation.
- *
- * The 7 segment's wikipedia notation below is used as standard.
- * See: http://en.wikipedia.org/wiki/Seven_segment_display
- *
- * Notation: +-a-+
- * f b
- * +-g-+
- * e c
- * +-d-+
- *
- * Usage:
- *
- * Register a map variable, and fill it with a character set:
- * static SEG7_DEFAULT_MAP(map_seg7);
- *
- *
- * Then use for conversion:
- * seg7 = map_to_seg7(&map_seg7, some_char);
- * ...
- *
- * In device drivers it is recommended, if required, to make the char map
- * accessible via the sysfs interface using the following scheme:
- *
- * static ssize_t show_map(struct device *dev, char *buf) {
- * memcpy(buf, &map_seg7, sizeof(map_seg7));
- * return sizeof(map_seg7);
- * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
- * if(cnt != sizeof(map_seg7))
- * return -EINVAL;
- * memcpy(&map_seg7, buf, cnt);
- * return cnt;
- * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
- *
- * History:
- * 2005-05-31 RFC linux-kernel@vger.kernel.org
- */
-#include <linux/errno.h>
-
-
-#define BIT_SEG7_A 0
-#define BIT_SEG7_B 1
-#define BIT_SEG7_C 2
-#define BIT_SEG7_D 3
-#define BIT_SEG7_E 4
-#define BIT_SEG7_F 5
-#define BIT_SEG7_G 6
-#define BIT_SEG7_RESERVED 7
-
-struct seg7_conversion_map {
- unsigned char table[128];
-};
-
-static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c)
-{
- return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
-}
-
-#define SEG7_CONVERSION_MAP(_name, _map) \
- struct seg7_conversion_map _name = { .table = { _map } }
-
-/*
- * It is recommended to use a facility that allows user space to redefine
- * custom character sets for LCD devices. Please use a sysfs interface
- * as described above.
- */
-#define MAP_TO_SEG7_SYSFS_FILE "map_seg7"
-
-/*******************************************************************************
- * ASCII conversion table
- ******************************************************************************/
-
-#define _SEG7(l,a,b,c,d,e,f,g) \
- ( a<<BIT_SEG7_A | b<<BIT_SEG7_B | c<<BIT_SEG7_C | d<<BIT_SEG7_D | \
- e<<BIT_SEG7_E | f<<BIT_SEG7_F | g<<BIT_SEG7_G )
-
-#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-
-#define _MAP_33_47_ASCII_SEG7_SYMBOL \
- _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
- _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
- _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
- _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
- _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
-
-#define _MAP_48_57_ASCII_SEG7_NUMERIC \
- _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
- _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
- _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
- _SEG7('9',1,1,1,1,0,1,1),
-
-#define _MAP_58_64_ASCII_SEG7_SYMBOL \
- _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
- _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
- _SEG7('@',1,1,0,1,1,1,1),
-
-#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
- _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
- _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
- _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_91_96_ASCII_SEG7_SYMBOL \
- _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
- _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
-
-#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
- _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
- _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
- _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_123_126_ASCII_SEG7_SYMBOL \
- _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
- _SEG7('~',1,0,0,0,0,0,0),
-
-/* Maps */
-
-/* This set tries to map as close as possible to the visible characteristics
- * of the ASCII symbol, lowercase and uppercase letters may differ in
- * presentation on the display.
- */
-#define MAP_ASCII7SEG_ALPHANUM \
- _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- _MAP_33_47_ASCII_SEG7_SYMBOL \
- _MAP_48_57_ASCII_SEG7_NUMERIC \
- _MAP_58_64_ASCII_SEG7_SYMBOL \
- _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \
- _MAP_91_96_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_123_126_ASCII_SEG7_SYMBOL
-
-/* This set tries to map as close as possible to the symbolic characteristics
- * of the ASCII character for maximum discrimination.
- * For now this means all alpha chars are in lower case representations.
- * (This for example facilitates the use of hex numbers with uppercase input.)
- */
-#define MAP_ASCII7SEG_ALPHANUM_LC \
- _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \
- _MAP_33_47_ASCII_SEG7_SYMBOL \
- _MAP_48_57_ASCII_SEG7_NUMERIC \
- _MAP_58_64_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_91_96_ASCII_SEG7_SYMBOL \
- _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \
- _MAP_123_126_ASCII_SEG7_SYMBOL
-
-#define SEG7_DEFAULT_MAP(_name) \
- SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
-
-#endif /* MAP_TO_7SEGMENT_H */
-
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
deleted file mode 100644
index 8c22a89..0000000
--- a/include/linux/matroxfb.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __LINUX_MATROXFB_H__
-#define __LINUX_MATROXFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include <linux/fb.h>
-
-struct matroxioc_output_mode {
- __u32 output; /* which output */
-#define MATROXFB_OUTPUT_PRIMARY 0x0000
-#define MATROXFB_OUTPUT_SECONDARY 0x0001
-#define MATROXFB_OUTPUT_DFP 0x0002
- __u32 mode; /* which mode */
-#define MATROXFB_OUTPUT_MODE_PAL 0x0001
-#define MATROXFB_OUTPUT_MODE_NTSC 0x0002
-#define MATROXFB_OUTPUT_MODE_MONITOR 0x0080
-};
-#define MATROXFB_SET_OUTPUT_MODE _IOW('n',0xFA,size_t)
-#define MATROXFB_GET_OUTPUT_MODE _IOWR('n',0xFA,size_t)
-
-/* bitfield */
-#define MATROXFB_OUTPUT_CONN_PRIMARY (1 << MATROXFB_OUTPUT_PRIMARY)
-#define MATROXFB_OUTPUT_CONN_SECONDARY (1 << MATROXFB_OUTPUT_SECONDARY)
-#define MATROXFB_OUTPUT_CONN_DFP (1 << MATROXFB_OUTPUT_DFP)
-/* connect these outputs to this framebuffer */
-#define MATROXFB_SET_OUTPUT_CONNECTION _IOW('n',0xF8,size_t)
-/* which outputs are connected to this framebuffer */
-#define MATROXFB_GET_OUTPUT_CONNECTION _IOR('n',0xF8,size_t)
-/* which outputs are available for this framebuffer */
-#define MATROXFB_GET_AVAILABLE_OUTPUTS _IOR('n',0xF9,size_t)
-/* which outputs exist on this framebuffer */
-#define MATROXFB_GET_ALL_OUTPUTS _IOR('n',0xFB,size_t)
-
-enum matroxfb_ctrl_id {
- MATROXFB_CID_TESTOUT = V4L2_CID_PRIVATE_BASE,
- MATROXFB_CID_DEFLICKER,
- MATROXFB_CID_LAST
-};
-
-#endif
-
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6c40684..3d15c83 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -6,295 +6,11 @@
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
-
#ifndef __LINUX_MDIO_H__
#define __LINUX_MDIO_H__
-#include <linux/types.h>
-#include <linux/mii.h>
-
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
- * Physical Medium Dependent */
-#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
-#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
-#define MDIO_MMD_TC 6 /* Transmission Convergence */
-#define MDIO_MMD_AN 7 /* Auto-Negotiation */
-#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
-#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
-#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1 MII_BMCR
-#define MDIO_STAT1 MII_BMSR
-#define MDIO_DEVID1 MII_PHYSID1
-#define MDIO_DEVID2 MII_PHYSID2
-#define MDIO_SPEED 4 /* Speed ability */
-#define MDIO_DEVS1 5 /* Devices in package */
-#define MDIO_DEVS2 6
-#define MDIO_CTRL2 7 /* 10G control 2 */
-#define MDIO_STAT2 8 /* 10G status 2 */
-#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1 14 /* Package identifier */
-#define MDIO_PKGID2 15
-#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
-#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
-#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
-#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
-#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
-#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
-#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
- * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
-#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER BMCR_PDOWN
-#define MDIO_CTRL1_RESET BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
-#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
-#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
-#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
-#define MDIO_STAT1_FAULT 0x0080 /* Fault */
-#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
-#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G 0x0001 /* 10G capable */
-#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
-#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
-#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
-#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
-#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
-#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
-#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
-#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
-#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
-#define MDIO_PMA_10GBT_SNR_MAX 127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
-#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
-
-/* EEE Supported/Advertisement/LP Advertisement registers.
- *
- * EEE capability Register (3.20), Advertisement (7.60) and
- * Link partner ability (7.61) registers have and can use the same identical
- * bit masks.
- */
-#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
-/* Note: the two defines above can be potentially used by the user-land
- * and cannot remove them now.
- * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
- * using the previous ones (that can be considered obsolete).
- */
-#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */
-#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */
-#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
-#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45 0x8000
-#define MDIO_PHY_ID_PRTAD 0x03e0
-#define MDIO_PHY_ID_DEVAD 0x001f
-#define MDIO_PHY_ID_C45_MASK \
- (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
- return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
+#include <uapi/linux/mdio.h>
-#ifdef __KERNEL__
static inline bool mdio_phy_id_is_c45(int phy_id)
{
@@ -460,5 +176,4 @@ static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
return reg;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/linux/media.h
deleted file mode 100644
index 0ef8833..0000000
--- a/include/linux/media.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Multimedia device API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- * Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_MEDIA_H
-#define __LINUX_MEDIA_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/version.h>
-
-#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0)
-
-struct media_device_info {
- char driver[16];
- char model[32];
- char serial[40];
- char bus_info[32];
- __u32 media_version;
- __u32 hw_revision;
- __u32 driver_version;
- __u32 reserved[31];
-};
-
-#define MEDIA_ENT_ID_FLAG_NEXT (1 << 31)
-
-#define MEDIA_ENT_TYPE_SHIFT 16
-#define MEDIA_ENT_TYPE_MASK 0x00ff0000
-#define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff
-
-#define MEDIA_ENT_T_DEVNODE (1 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_DEVNODE_V4L (MEDIA_ENT_T_DEVNODE + 1)
-#define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_T_DEVNODE + 2)
-#define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_T_DEVNODE + 3)
-#define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_T_DEVNODE + 4)
-
-#define MEDIA_ENT_T_V4L2_SUBDEV (2 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR (MEDIA_ENT_T_V4L2_SUBDEV + 1)
-#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH (MEDIA_ENT_T_V4L2_SUBDEV + 2)
-#define MEDIA_ENT_T_V4L2_SUBDEV_LENS (MEDIA_ENT_T_V4L2_SUBDEV + 3)
-
-#define MEDIA_ENT_FL_DEFAULT (1 << 0)
-
-struct media_entity_desc {
- __u32 id;
- char name[32];
- __u32 type;
- __u32 revision;
- __u32 flags;
- __u32 group_id;
- __u16 pads;
- __u16 links;
-
- __u32 reserved[4];
-
- union {
- /* Node specifications */
- struct {
- __u32 major;
- __u32 minor;
- } v4l;
- struct {
- __u32 major;
- __u32 minor;
- } fb;
- struct {
- __u32 card;
- __u32 device;
- __u32 subdevice;
- } alsa;
- int dvb;
-
- /* Sub-device specifications */
- /* Nothing needed yet */
- __u8 raw[184];
- };
-};
-
-#define MEDIA_PAD_FL_SINK (1 << 0)
-#define MEDIA_PAD_FL_SOURCE (1 << 1)
-
-struct media_pad_desc {
- __u32 entity; /* entity ID */
- __u16 index; /* pad index */
- __u32 flags; /* pad flags */
- __u32 reserved[2];
-};
-
-#define MEDIA_LNK_FL_ENABLED (1 << 0)
-#define MEDIA_LNK_FL_IMMUTABLE (1 << 1)
-#define MEDIA_LNK_FL_DYNAMIC (1 << 2)
-
-struct media_link_desc {
- struct media_pad_desc source;
- struct media_pad_desc sink;
- __u32 flags;
- __u32 reserved[2];
-};
-
-struct media_links_enum {
- __u32 entity;
- /* Should have enough room for pads elements */
- struct media_pad_desc __user *pads;
- /* Should have enough room for links elements */
- struct media_link_desc __user *links;
- __u32 reserved[4];
-};
-
-#define MEDIA_IOC_DEVICE_INFO _IOWR('|', 0x00, struct media_device_info)
-#define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc)
-#define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum)
-#define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc)
-
-#endif /* __LINUX_MEDIA_H */
diff --git a/include/linux/mei.h b/include/linux/mei.h
deleted file mode 100644
index bc0d8b6..0000000
--- a/include/linux/mei.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Intel MEI Interface Header
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Corporation.
- * linux-mei@linux.intel.com
- * http://www.intel.com
- *
- * BSD LICENSE
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#ifndef _LINUX_MEI_H
-#define _LINUX_MEI_H
-
-#include <linux/uuid.h>
-
-/*
- * This IOCTL is used to associate the current file descriptor with a
- * FW Client (given by UUID). This opens a communication channel
- * between a host client and a FW client. From this point every read and write
- * will communicate with the associated FW client.
- * Only in close() (file_operation release()) the communication between
- * the clients is disconnected
- *
- * The IOCTL argument is a struct with a union that contains
- * the input parameter and the output parameter for this IOCTL.
- *
- * The input parameter is UUID of the FW Client.
- * The output parameter is the properties of the FW client
- * (FW protocol version and max message size).
- *
- */
-#define IOCTL_MEI_CONNECT_CLIENT \
- _IOWR('H' , 0x01, struct mei_connect_client_data)
-
-/*
- * Intel MEI client information struct
- */
-struct mei_client {
- __u32 max_msg_length;
- __u8 protocol_version;
- __u8 reserved[3];
-};
-
-/*
- * IOCTL Connect Client Data structure
- */
-struct mei_connect_client_data {
- union {
- uuid_le in_client_uuid;
- struct mei_client out_client_properties;
- };
-};
-
-#endif /* _LINUX_MEI_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index cec5693..e5ccb9d 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -1,66 +1,10 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
/*
* NUMA memory policies for Linux.
* Copyright 2003,2004 Andi Kleen SuSE Labs
*/
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
- MPOL_DEFAULT,
- MPOL_PREFERRED,
- MPOL_BIND,
- MPOL_INTERLEAVE,
- MPOL_MAX, /* always last member of enum */
-};
-
-enum mpol_rebind_step {
- MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */
- MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */
- MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/
- MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES (1 << 15)
-#define MPOL_F_RELATIVE_NODES (1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */
-#define MPOL_F_ADDR (1<<1) /* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags". These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED (1 << 0) /* identify shared policies */
-#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */
-
-#ifdef __KERNEL__
#include <linux/mmzone.h>
#include <linux/slab.h>
@@ -68,6 +12,7 @@ enum mpol_rebind_step {
#include <linux/spinlock.h>
#include <linux/nodemask.h>
#include <linux/pagemap.h>
+#include <uapi/linux/mempolicy.h>
struct mm_struct;
@@ -379,6 +324,4 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
}
#endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/meye.h b/include/linux/meye.h
deleted file mode 100644
index 0dd4995..0000000
--- a/include/linux/meye.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Motion Eye video4linux driver for Sony Vaio PictureBook
- *
- * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
- *
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
- *
- * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
- *
- * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
- *
- * Some parts borrowed from various video4linux drivers, especially
- * bttv-driver.c and zoran.c, see original files for credits.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MEYE_H_
-#define _MEYE_H_
-
-/****************************************************************************/
-/* Private API for handling mjpeg capture / playback. */
-/****************************************************************************/
-
-struct meye_params {
- unsigned char subsample;
- unsigned char quality;
- unsigned char sharpness;
- unsigned char agc;
- unsigned char picture;
- unsigned char framerate;
-};
-
-/* query the extended parameters */
-#define MEYEIOC_G_PARAMS _IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params)
-/* set the extended parameters */
-#define MEYEIOC_S_PARAMS _IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params)
-/* queue a buffer for mjpeg capture */
-#define MEYEIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOC_PRIVATE+2, int)
-/* sync a previously queued mjpeg buffer */
-#define MEYEIOC_SYNC _IOWR('v', BASE_VIDIOC_PRIVATE+3, int)
-/* get a still uncompressed snapshot */
-#define MEYEIOC_STILLCAPT _IO ('v', BASE_VIDIOC_PRIVATE+4)
-/* get a jpeg compressed snapshot */
-#define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int)
-
-/* V4L2 private controls */
-#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE
-#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4)
-
-#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a..47492c96 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
*
* Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
*/
-
#ifndef __LINUX_MII_H__
#define __LINUX_MII_H__
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR 0x00 /* Basic mode control register */
-#define MII_BMSR 0x01 /* Basic mode status register */
-#define MII_PHYSID1 0x02 /* PHYS ID 1 */
-#define MII_PHYSID2 0x03 /* PHYS ID 2 */
-#define MII_ADVERTISE 0x04 /* Advertisement control reg */
-#define MII_LPA 0x05 /* Link partner ability reg */
-#define MII_EXPANSION 0x06 /* Expansion register */
-#define MII_CTRL1000 0x09 /* 1000BASE-T control */
-#define MII_STAT1000 0x0a /* 1000BASE-T status */
-#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
-#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
-#define MII_ESTATUS 0x0f /* Extended Status */
-#define MII_DCOUNTER 0x12 /* Disconnect counter */
-#define MII_FCSCOUNTER 0x13 /* False carrier counter */
-#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
-#define MII_RERRCOUNTER 0x15 /* Receive error counter */
-#define MII_SREVISION 0x16 /* Silicon revision */
-#define MII_RESV1 0x17 /* Reserved... */
-#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
-#define MII_PHYADDR 0x19 /* PHY address */
-#define MII_RESV2 0x1a /* Reserved... */
-#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
-#define MII_NCONFIG 0x1c /* Network interface config */
-
-/* Basic mode control register. */
-#define BMCR_RESV 0x003f /* Unused... */
-#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
-#define BMCR_CTST 0x0080 /* Collision test */
-#define BMCR_FULLDPLX 0x0100 /* Full duplex */
-#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
-#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */
-#define BMCR_PDOWN 0x0800 /* Enable low power state */
-#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
-#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
-#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
-#define BMCR_RESET 0x8000 /* Reset to default state */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
-#define BMSR_JCD 0x0002 /* Jabber detected */
-#define BMSR_LSTATUS 0x0004 /* Link status */
-#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
-#define BMSR_RFAULT 0x0010 /* Remote fault detected */
-#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
-#define BMSR_RESV 0x00c0 /* Unused... */
-#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
-#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
-#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
-#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
-#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
-#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
-#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
-#define ADVERTISE_RESV 0x1000 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT 0x001f /* Same as advertise selector */
-#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
-#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
-#define LPA_PAUSE_CAP 0x0400 /* Can pause */
-#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
-#define LPA_RESV 0x1000 /* Unused... */
-#define LPA_RFAULT 0x2000 /* Link partner faulted */
-#define LPA_LPACK 0x4000 /* Link partner acked us */
-#define LPA_NPAGE 0x8000 /* Next page bit */
-
-#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
-#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
-#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
-#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
-#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
-#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
-#define EXPANSION_RESV 0xffe0 /* Unused... */
-
-#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
-#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1 0x00ff /* Unused... */
-#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
-#define NWAYTEST_RESV2 0xfe00 /* Unused... */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER 0x0800
-#define CTL1000_ENABLE_MASTER 0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
-#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
-#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX 0x01
-#define FLOW_CTRL_RX 0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
-#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
- __u16 phy_id;
- __u16 reg_num;
- __u16 val_in;
- __u16 val_out;
-};
-
-#ifdef __KERNEL__
#include <linux/if.h>
+#include <uapi/linux/mii.h>
struct ethtool_cmd;
@@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
return cap;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h
deleted file mode 100644
index 13fe09e..0000000
--- a/include/linux/minix_fs.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _LINUX_MINIX_FS_H
-#define _LINUX_MINIX_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The minix filesystem constants/structures
- */
-
-/*
- * Thanks to Kees J Bot for sending me the definitions of the new
- * minix filesystem (aka V2) with bigger inodes and 32-bit block
- * pointers.
- */
-
-#define MINIX_ROOT_INO 1
-
-/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
-#define MINIX_LINK_MAX 250
-#define MINIX2_LINK_MAX 65530
-
-#define MINIX_I_MAP_SLOTS 8
-#define MINIX_Z_MAP_SLOTS 64
-#define MINIX_VALID_FS 0x0001 /* Clean fs. */
-#define MINIX_ERROR_FS 0x0002 /* fs has errors. */
-
-#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
-
-/*
- * This is the original minix inode layout on disk.
- * Note the 8-bit gid and atime and ctime.
- */
-struct minix_inode {
- __u16 i_mode;
- __u16 i_uid;
- __u32 i_size;
- __u32 i_time;
- __u8 i_gid;
- __u8 i_nlinks;
- __u16 i_zone[9];
-};
-
-/*
- * The new minix inode has all the time entries, as well as
- * long block numbers and a third indirect block (7+1+1+1
- * instead of 7+1+1). Also, some previously 8-bit values are
- * now 16-bit. The inode is now 64 bytes instead of 32.
- */
-struct minix2_inode {
- __u16 i_mode;
- __u16 i_nlinks;
- __u16 i_uid;
- __u16 i_gid;
- __u32 i_size;
- __u32 i_atime;
- __u32 i_mtime;
- __u32 i_ctime;
- __u32 i_zone[10];
-};
-
-/*
- * minix super-block data on disk
- */
-struct minix_super_block {
- __u16 s_ninodes;
- __u16 s_nzones;
- __u16 s_imap_blocks;
- __u16 s_zmap_blocks;
- __u16 s_firstdatazone;
- __u16 s_log_zone_size;
- __u32 s_max_size;
- __u16 s_magic;
- __u16 s_state;
- __u32 s_zones;
-};
-
-/*
- * V3 minix super-block data on disk
- */
-struct minix3_super_block {
- __u32 s_ninodes;
- __u16 s_pad0;
- __u16 s_imap_blocks;
- __u16 s_zmap_blocks;
- __u16 s_firstdatazone;
- __u16 s_log_zone_size;
- __u16 s_pad1;
- __u32 s_max_size;
- __u32 s_zones;
- __u16 s_magic;
- __u16 s_pad2;
- __u16 s_blocksize;
- __u8 s_disk_version;
-};
-
-struct minix_dir_entry {
- __u16 inode;
- char name[0];
-};
-
-struct minix3_dir_entry {
- __u32 inode;
- char name[0];
-};
-#endif
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 77cec2f..d09dde1 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -1,20 +1,11 @@
#ifndef _LINUX_MMAN_H
#define _LINUX_MMAN_H
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE 1
-#define MREMAP_FIXED 2
-
-#define OVERCOMMIT_GUESS 0
-#define OVERCOMMIT_ALWAYS 1
-#define OVERCOMMIT_NEVER 2
-
-#ifdef __KERNEL__
#include <linux/mm.h>
#include <linux/percpu_counter.h>
#include <linux/atomic.h>
+#include <uapi/linux/mman.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
@@ -88,5 +79,4 @@ calc_vm_flag_bits(unsigned long flags)
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
_calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mmtimer.h b/include/linux/mmtimer.h
deleted file mode 100644
index 884cabf..0000000
--- a/include/linux/mmtimer.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Intel Multimedia Timer device interface
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
- *
- * This file should define an interface compatible with the IA-PC Multimedia
- * Timers Draft Specification (rev. 0.97) from Intel. Note that some
- * hardware may not be able to safely export its registers to userspace,
- * so the ioctl interface should support all necessary functionality.
- *
- * 11/01/01 - jbarnes - initial revision
- * 9/10/04 - Christoph Lameter - remove interrupt support
- * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
- */
-
-#ifndef _LINUX_MMTIMER_H
-#define _LINUX_MMTIMER_H
-
-/*
- * Breakdown of the ioctl's available. An 'optional' next to the command
- * indicates that supporting this command is optional, while 'required'
- * commands must be implemented if conformance is desired.
- *
- * MMTIMER_GETOFFSET - optional
- * Should return the offset (relative to the start of the page where the
- * registers are mapped) for the counter in question.
- *
- * MMTIMER_GETRES - required
- * The resolution of the clock in femto (10^-15) seconds
- *
- * MMTIMER_GETFREQ - required
- * Frequency of the clock in Hz
- *
- * MMTIMER_GETBITS - required
- * Number of bits in the clock's counter
- *
- * MMTIMER_MMAPAVAIL - required
- * Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
- *
- * MMTIMER_GETCOUNTER - required
- * Gets the current value in the counter
- */
-#define MMTIMER_IOCTL_BASE 'm'
-
-#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
-#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
-#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
-#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
-#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
-#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
-
-#endif /* _LINUX_MMTIMER_H */
diff --git a/include/linux/mqueue.h b/include/linux/mqueue.h
deleted file mode 100644
index 8b5a796..0000000
--- a/include/linux/mqueue.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- It is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this software; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- 02111-1307 USA. */
-
-#ifndef _LINUX_MQUEUE_H
-#define _LINUX_MQUEUE_H
-
-#define MQ_PRIO_MAX 32768
-/* per-uid limit of kernel memory used by mqueue, in bytes */
-#define MQ_BYTES_MAX 819200
-
-struct mq_attr {
- long mq_flags; /* message queue flags */
- long mq_maxmsg; /* maximum number of messages */
- long mq_msgsize; /* maximum message size */
- long mq_curmsgs; /* number of messages currently queued */
- long __reserved[4]; /* ignored for input, zeroed for output */
-};
-
-/*
- * SIGEV_THREAD implementation:
- * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
- * to mq_notify, then
- * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
- * necessary that the socket is bound.
- * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
- * bytes long.
- * If the notification is triggered, then the cookie is sent to the netlink
- * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
- * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
- * removed, either due to a close() on the message queue fd or due to a
- * mq_notify() that removed the notification.
- */
-#define NOTIFY_NONE 0
-#define NOTIFY_WOKENUP 1
-#define NOTIFY_REMOVED 2
-
-#define NOTIFY_COOKIE_LEN 32
-
-#endif
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 46caaf4..ea00d91 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -1,138 +1,10 @@
#ifndef __LINUX_MROUTE_H
#define __LINUX_MROUTE_H
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/in.h>
-#endif
-
-/*
- * Based on the MROUTING 3.5 defines primarily to keep
- * source compatibility with BSD.
- *
- * See the mrouted code for the original history.
- *
- * Protocol Independent Multicast (PIM) data structures included
- * Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE 200
-#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */
-#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */
-#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */
-#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */
-#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */
-#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */
-#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */
-#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */
-#define MRT_PIM (MRT_BASE+8) /* enable PIM code */
-#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */
-
-#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */
-#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS 32
-typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS ((vifi_t)(-1))
-
-/*
- * Same idea as select
- */
-
-#define VIFM_SET(n,m) ((m)|=(1<<(n)))
-#define VIFM_CLR(n,m) ((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m) ((m)&(1<<(n)))
-#define VIFM_CLRALL(m) ((m)=0)
-#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom))
-#define VIFM_SAME(m1,m2) ((m1)==(m2))
-
-/*
- * Passed by mrouted for an MRT_ADD_VIF - again we use the
- * mrouted 3.6 structures for compatibility
- */
-
-struct vifctl {
- vifi_t vifc_vifi; /* Index of VIF */
- unsigned char vifc_flags; /* VIFF_ flags */
- unsigned char vifc_threshold; /* ttl limit */
- unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
- union {
- struct in_addr vifc_lcl_addr; /* Local interface address */
- int vifc_lcl_ifindex; /* Local interface index */
- };
- struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL 0x1 /* IPIP tunnel */
-#define VIFF_SRCRT 0x2 /* NI */
-#define VIFF_REGISTER 0x4 /* register vif */
-#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of
- vifc_lcl_addr to find an interface */
-
-/*
- * Cache manipulation structures for mrouted and PIMd
- */
-
-struct mfcctl {
- struct in_addr mfcc_origin; /* Origin of mcast */
- struct in_addr mfcc_mcastgrp; /* Group in question */
- vifi_t mfcc_parent; /* Where it arrived */
- unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */
- unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */
- unsigned int mfcc_byte_cnt;
- unsigned int mfcc_wrong_if;
- int mfcc_expire;
-};
-
-/*
- * Group count retrieval for mrouted
- */
-
-struct sioc_sg_req {
- struct in_addr src;
- struct in_addr grp;
- unsigned long pktcnt;
- unsigned long bytecnt;
- unsigned long wrong_if;
-};
-
-/*
- * To get vif packet counts
- */
-
-struct sioc_vif_req {
- vifi_t vifi; /* Which iface */
- unsigned long icount; /* In packets */
- unsigned long ocount; /* Out packets */
- unsigned long ibytes; /* In bytes */
- unsigned long obytes; /* Out bytes */
-};
-
-/*
- * This is the format the mroute daemon expects to see IGMP control
- * data. Magically happens to be like an IP packet as per the original
- */
-
-struct igmpmsg {
- __u32 unused1,unused2;
- unsigned char im_msgtype; /* What is this */
- unsigned char im_mbz; /* Must be zero */
- unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */
- unsigned char unused3;
- struct in_addr im_src,im_dst;
-};
-
-/*
- * That's all usermode folks
- */
-
-#ifdef __KERNEL__
#include <linux/pim.h>
#include <net/sock.h>
+#include <uapi/linux/mroute.h>
#ifdef CONFIG_IP_MROUTE
static inline int ip_mroute_opt(int opt)
@@ -228,24 +100,8 @@ struct mfc_cache {
#define MFC_HASH(a,b) ((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
#endif
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
-
-/*
- * Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */
-
-#ifdef __KERNEL__
struct rtmsg;
extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct rtmsg *rtm, int nowait);
#endif
-
-#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c725..a223561 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,123 +1,11 @@
#ifndef __LINUX_MROUTE6_H
#define __LINUX_MROUTE6_H
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- * Based on the MROUTING 3.5 defines primarily to keep
- * source compatibility with BSD.
- *
- * See the pim6sd code for the original history.
- *
- * Protocol Independent Multicast (PIM) data structures included
- * Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE 200
-#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */
-#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */
-#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */
-#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */
-#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */
-#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */
-#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */
-#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */
-#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */
-#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */
-
-#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */
-#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS 32
-typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS ((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE 256
-#endif
-
-typedef __u32 if_mask;
-#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
- if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p) bzero(p, sizeof(*(p)))
-
-/*
- * Passed by mrouted for an MRT_ADD_MIF - again we use the
- * mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
- mifi_t mif6c_mifi; /* Index of MIF */
- unsigned char mif6c_flags; /* MIFF_ flags */
- unsigned char vifc_threshold; /* ttl limit */
- __u16 mif6c_pifi; /* the index of the physical IF */
- unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER 0x1 /* register vif */
-
-/*
- * Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
- struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
- struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
- mifi_t mf6cc_parent; /* Where it arrived */
- struct if_set mf6cc_ifset; /* Where it is going */
-};
-
-/*
- * Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
- struct sockaddr_in6 src;
- struct sockaddr_in6 grp;
- unsigned long pktcnt;
- unsigned long bytecnt;
- unsigned long wrong_if;
-};
-
-/*
- * To get vif packet counts
- */
-
-struct sioc_mif_req6 {
- mifi_t mifi; /* Which iface */
- unsigned long icount; /* In packets */
- unsigned long ocount; /* Out packets */
- unsigned long ibytes; /* In bytes */
- unsigned long obytes; /* Out bytes */
-};
-
-/*
- * That's all usermode folks
- */
-
-#ifdef __KERNEL__
#include <linux/pim.h>
#include <linux/skbuff.h> /* for struct sk_buff_head */
#include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
#ifdef CONFIG_IPV6_MROUTE
static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@ struct mfc6_cache {
#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
-#endif
-
-#ifdef __KERNEL__
struct rtmsg;
extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk)
}
#endif
#endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE 1
-#define MRT6MSG_WRONGMIF 2
-#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */
- __u8 im6_mbz; /* must be zero */
- __u8 im6_msgtype; /* what type of message */
- __u16 im6_mif; /* mif rec'd on */
- __u32 im6_pad; /* padding for 64 bit arch */
- struct in6_addr im6_src, im6_dst;
-};
-
-#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 11cc2ac..e1b163f9 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,174 +1,11 @@
#ifndef _LINUX_MSDOS_FS_H
#define _LINUX_MSDOS_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/msdos_fs.h>
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE 512 /* sector size (bytes) */
-#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */
-#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */
-#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */
-#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME 256 /* maximum name length */
-#define CF_LE_W(v) le16_to_cpu(v)
-#define CF_LE_L(v) le32_to_cpu(v)
-#define CT_LE_W(v) cpu_to_le16(v)
-#define CT_LE_L(v) cpu_to_le32(v)
-
-#define MSDOS_ROOT_INO 1 /* The root inode number */
-#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */
-
-#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES (65536)
-#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE 0 /* no attribute bits */
-#define ATTR_RO 1 /* read-only */
-#define ATTR_HIDDEN 2 /* hidden */
-#define ATTR_SYS 4 /* system */
-#define ATTR_VOLUME 8 /* volume label */
-#define ATTR_DIR 16 /* directory */
-#define ATTR_ARCH 32 /* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE 8 /* base is lower case */
-#define CASE_LOWER_EXT 16 /* extension is lower case */
-
-#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */
-#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN 255 /* maximum long name length */
-#define MSDOS_NAME 11 /* maximum name length */
-#define MSDOS_SLOTS 21 /* max # of slots for short and long names */
-#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
- MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT 2
-
-/* maximum number of clusters */
-#define MAX_FAT12 0xFF4
-#define MAX_FAT16 0xFFF4
-#define MAX_FAT32 0x0FFFFFF6
-#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
- MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12 0xFF7
-#define BAD_FAT16 0xFFF7
-#define BAD_FAT32 0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12 0xFFF
-#define EOF_FAT16 0xFFFF
-#define EOF_FAT32 0x0FFFFFFF
-
-#define FAT_ENT_FREE (0)
-#define FAT_ENT_BAD (BAD_FAT32)
-#define FAT_ENT_EOF (EOF_FAT32)
-
-#define FAT_FSINFO_SIG1 0x41615252
-#define FAT_FSINFO_SIG2 0x61417272
-#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
- && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
- long d_ino;
- __kernel_off_t d_off;
- unsigned short d_reclen;
- char d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32)
-
-struct fat_boot_sector {
- __u8 ignored[3]; /* Boot strap short or near jump */
- __u8 system_id[8]; /* Name - can be used to special case
- partition manager volumes */
- __u8 sector_size[2]; /* bytes per logical sector */
- __u8 sec_per_clus; /* sectors/cluster */
- __le16 reserved; /* reserved sectors */
- __u8 fats; /* number of FATs */
- __u8 dir_entries[2]; /* root directory entries */
- __u8 sectors[2]; /* number of sectors */
- __u8 media; /* media code */
- __le16 fat_length; /* sectors/FAT */
- __le16 secs_track; /* sectors per track */
- __le16 heads; /* number of heads */
- __le32 hidden; /* hidden sectors (unused) */
- __le32 total_sect; /* number of sectors (if sectors == 0) */
-
- /* The following fields are only used by FAT32 */
- __le32 fat32_length; /* sectors/FAT */
- __le16 flags; /* bit 8: fat mirroring, low 4: active fat */
- __u8 version[2]; /* major, minor filesystem version */
- __le32 root_cluster; /* first cluster in root directory */
- __le16 info_sector; /* filesystem info sector */
- __le16 backup_boot; /* backup boot sector */
- __le16 reserved2[6]; /* Unused */
-};
-
-struct fat_boot_fsinfo {
- __le32 signature1; /* 0x41615252L */
- __le32 reserved1[120]; /* Nothing as far as I can tell */
- __le32 signature2; /* 0x61417272L */
- __le32 free_clusters; /* Free cluster count. -1 if unknown */
- __le32 next_cluster; /* Most recently allocated cluster */
- __le32 reserved2[4];
-};
-
-struct msdos_dir_entry {
- __u8 name[MSDOS_NAME];/* name and extension */
- __u8 attr; /* attribute bits */
- __u8 lcase; /* Case for base and extension */
- __u8 ctime_cs; /* Creation time, centiseconds (0-199) */
- __le16 ctime; /* Creation time */
- __le16 cdate; /* Creation date */
- __le16 adate; /* Last access date */
- __le16 starthi; /* High 16 bits of cluster in FAT32 */
- __le16 time,date,start;/* time, date and first cluster */
- __le32 size; /* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
- __u8 id; /* sequence number for slot */
- __u8 name0_4[10]; /* first 5 characters in name */
- __u8 attr; /* attribute byte */
- __u8 reserved; /* always 0 */
- __u8 alias_checksum; /* checksum for 8.3 alias */
- __u8 name5_10[12]; /* 6 more characters in name */
- __le16 start; /* starting cluster number, 0 in long slots */
- __u8 name11_12[4]; /* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
/* media of boot sector */
static inline int fat_valid_media(u8 media)
{
return 0xf8 <= media || media == 0xf0;
}
-#endif /* !__KERNEL__ */
#endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 56abf155..7a4b9e9 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -1,78 +1,8 @@
#ifndef _LINUX_MSG_H
#define _LINUX_MSG_H
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR 010000 /* no error if message is too big */
-#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
- struct ipc_perm msg_perm;
- struct msg *msg_first; /* first message on queue,unused */
- struct msg *msg_last; /* last message in queue,unused */
- __kernel_time_t msg_stime; /* last msgsnd time */
- __kernel_time_t msg_rtime; /* last msgrcv time */
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */
- unsigned long msg_lqbytes; /* ditto */
- unsigned short msg_cbytes; /* current number of bytes on queue */
- unsigned short msg_qnum; /* number of messages in queue */
- unsigned short msg_qbytes; /* max number of bytes on queue */
- __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_ipc_pid_t msg_lrpid; /* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
- long mtype; /* type of message */
- char mtext[1]; /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
- int msgpool;
- int msgmap;
- int msgmax;
- int msgmnb;
- int msgmni;
- int msgssz;
- int msgtql;
- unsigned short msgseg;
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB : msgmni = 16 (MSGMNI)
- * 4 GB : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */
-#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */
-#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL MSGMNB /* number of system message headers */
-#define MSGMAP MSGMNB /* number of entries in message map */
-#define MSGSSZ 16 /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/msg.h>
/* one msg_msg structure for each message */
struct msg_msg {
@@ -107,6 +37,4 @@ extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
size_t msgsz, long msgtyp, int msgflg);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_MSG_H */
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
deleted file mode 100644
index 18543e2..0000000
--- a/include/linux/mtio.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * linux/mtio.h header file for Linux. Written by H. Bergman
- *
- * Modified for special ioctls provided by zftape in September 1997
- * by C.-J. Heine.
- */
-
-#ifndef _LINUX_MTIO_H
-#define _LINUX_MTIO_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-/*
- * Structures and definitions for mag tape io control commands
- */
-
-/* structure for MTIOCTOP - mag tape op command */
-struct mtop {
- short mt_op; /* operations defined below */
- int mt_count; /* how many of them */
-};
-
-/* Magnetic Tape operations [Not all operations supported by all drivers]: */
-#define MTRESET 0 /* +reset drive in case of problems */
-#define MTFSF 1 /* forward space over FileMark,
- * position at first record of next file
- */
-#define MTBSF 2 /* backward space FileMark (position before FM) */
-#define MTFSR 3 /* forward space record */
-#define MTBSR 4 /* backward space record */
-#define MTWEOF 5 /* write an end-of-file record (mark) */
-#define MTREW 6 /* rewind */
-#define MTOFFL 7 /* rewind and put the drive offline (eject?) */
-#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */
-#define MTRETEN 9 /* retension tape */
-#define MTBSFM 10 /* +backward space FileMark, position at FM */
-#define MTFSFM 11 /* +forward space FileMark, position at FM */
-#define MTEOM 12 /* goto end of recorded media (for appending files).
- * MTEOM positions after the last FM, ready for
- * appending another file.
- */
-#define MTERASE 13 /* erase tape -- be careful! */
-
-#define MTRAS1 14 /* run self test 1 (nondestructive) */
-#define MTRAS2 15 /* run self test 2 (destructive) */
-#define MTRAS3 16 /* reserved for self test 3 */
-
-#define MTSETBLK 20 /* set block length (SCSI) */
-#define MTSETDENSITY 21 /* set tape density (SCSI) */
-#define MTSEEK 22 /* seek to block (Tandberg, etc.) */
-#define MTTELL 23 /* tell block (Tandberg, etc.) */
-#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
- /* ordinary buffered operation with code 1 */
-#define MTFSS 25 /* space forward over setmarks */
-#define MTBSS 26 /* space backward over setmarks */
-#define MTWSM 27 /* write setmarks */
-
-#define MTLOCK 28 /* lock the drive door */
-#define MTUNLOCK 29 /* unlock the drive door */
-#define MTLOAD 30 /* execute the SCSI load command */
-#define MTUNLOAD 31 /* execute the SCSI unload command */
-#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
-#define MTSETPART 33 /* Change the active tape partition */
-#define MTMKPART 34 /* Format the tape with one or two partitions */
-#define MTWEOFI 35 /* write an end-of-file record (mark) in immediate mode */
-
-/* structure for MTIOCGET - mag tape get status command */
-
-struct mtget {
- long mt_type; /* type of magtape device */
- long mt_resid; /* residual count: (not sure)
- * number of bytes ignored, or
- * number of files not skipped, or
- * number of records not skipped.
- */
- /* the following registers are device dependent */
- long mt_dsreg; /* status register */
- long mt_gstat; /* generic (device independent) status */
- long mt_erreg; /* error register */
- /* The next two fields are not always used */
- __kernel_daddr_t mt_fileno; /* number of current file on tape */
- __kernel_daddr_t mt_blkno; /* current block number */
-};
-
-
-
-/*
- * Constants for mt_type. Not all of these are supported,
- * and these are not all of the ones that are supported.
- */
-#define MT_ISUNKNOWN 0x01
-#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */
-#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */
-#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */
-#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */
-#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */
-#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */
-#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */
-#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */
-#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */
-#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */
-#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */
-#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
-#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */
-#define MT_ISDDS1 0x51 /* DDS device without partitions */
-#define MT_ISDDS2 0x52 /* DDS device with partitions */
-#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0)
- and SCSI emulated (DI, DP, USB) */
-#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */
-#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */
-
-/* QIC-40/80/3010/3020 ftape supported drives.
- * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
- */
-#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */
-#define MT_ISFTAPE_FLAG 0x800000
-
-
-/* structure for MTIOCPOS - mag tape get position command */
-
-struct mtpos {
- long mt_blkno; /* current block number */
-};
-
-
-/* mag tape io control commands */
-#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
-#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
-#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */
-
-
-/* Generic Mag Tape (device independent) status macros for examining
- * mt_gstat -- HP-UX compatible.
- * There is room for more generic status bits here, but I don't
- * know which of them are reserved. At least three or so should
- * be added to make this really useful.
- */
-#define GMT_EOF(x) ((x) & 0x80000000)
-#define GMT_BOT(x) ((x) & 0x40000000)
-#define GMT_EOT(x) ((x) & 0x20000000)
-#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */
-#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */
-#define GMT_WR_PROT(x) ((x) & 0x04000000)
-/* #define GMT_ ? ((x) & 0x02000000) */
-#define GMT_ONLINE(x) ((x) & 0x01000000)
-#define GMT_D_6250(x) ((x) & 0x00800000)
-#define GMT_D_1600(x) ((x) & 0x00400000)
-#define GMT_D_800(x) ((x) & 0x00200000)
-/* #define GMT_ ? ((x) & 0x00100000) */
-/* #define GMT_ ? ((x) & 0x00080000) */
-#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */
-/* #define GMT_ ? ((x) & 0x00020000) */
-#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */
-#define GMT_CLN(x) ((x) & 0x00008000) /* cleaning requested */
-/* 15 generic status bits unused */
-
-
-/* SCSI-tape specific definitions */
-/* Bitfield shifts in the status */
-#define MT_ST_BLKSIZE_SHIFT 0
-#define MT_ST_BLKSIZE_MASK 0xffffff
-#define MT_ST_DENSITY_SHIFT 24
-#define MT_ST_DENSITY_MASK 0xff000000
-
-#define MT_ST_SOFTERR_SHIFT 0
-#define MT_ST_SOFTERR_MASK 0xffff
-
-/* Bitfields for the MTSETDRVBUFFER ioctl */
-#define MT_ST_OPTIONS 0xf0000000
-#define MT_ST_BOOLEANS 0x10000000
-#define MT_ST_SETBOOLEANS 0x30000000
-#define MT_ST_CLEARBOOLEANS 0x40000000
-#define MT_ST_WRITE_THRESHOLD 0x20000000
-#define MT_ST_DEF_BLKSIZE 0x50000000
-#define MT_ST_DEF_OPTIONS 0x60000000
-#define MT_ST_TIMEOUTS 0x70000000
-#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000)
-#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000)
-#define MT_ST_SET_CLN 0x80000000
-
-#define MT_ST_BUFFER_WRITES 0x1
-#define MT_ST_ASYNC_WRITES 0x2
-#define MT_ST_READ_AHEAD 0x4
-#define MT_ST_DEBUGGING 0x8
-#define MT_ST_TWO_FM 0x10
-#define MT_ST_FAST_MTEOM 0x20
-#define MT_ST_AUTO_LOCK 0x40
-#define MT_ST_DEF_WRITES 0x80
-#define MT_ST_CAN_BSR 0x100
-#define MT_ST_NO_BLKLIMS 0x200
-#define MT_ST_CAN_PARTITIONS 0x400
-#define MT_ST_SCSI2LOGICAL 0x800
-#define MT_ST_SYSV 0x1000
-#define MT_ST_NOWAIT 0x2000
-#define MT_ST_SILI 0x4000
-#define MT_ST_NOWAIT_EOF 0x8000
-
-/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
-#define MT_ST_CLEAR_DEFAULT 0xfffff
-#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000)
-#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000)
-#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000)
-
-/* The offset for the arguments for the special HP changer load command. */
-#define MT_ST_HPLOADER_OFFSET 10000
-
-#endif /* _LINUX_MTIO_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 54b8e0d..5d0b2a1 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -43,15 +43,12 @@
*
*
*/
-
#ifndef __LINUX_N_R3964_H__
#define __LINUX_N_R3964_H__
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
#include <linux/param.h>
+#include <uapi/linux/n_r3964.h>
/*
* Common ascii handshake characters:
@@ -73,32 +70,6 @@
#define R3964_TO_RX_PANIC ((4000)*HZ/1000)
#define R3964_MAX_RETRIES 5
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS 0x5301
-#define R3964_SETPRIORITY 0x5302
-#define R3964_USE_BCC 0x5303
-#define R3964_READ_TELEGRAM 0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER 0
-#define R3964_SLAVE 1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK 0x0001
-#define R3964_SIG_DATA 0x0002
-#define R3964_SIG_ALL 0x000f
-#define R3964_SIG_NONE 0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
enum { R3964_IDLE,
R3964_TX_REQUEST, R3964_TRANSMITTING,
@@ -127,29 +98,6 @@ struct r3964_client_info {
};
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0 /* no error. */
-#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
- int msg_id;
- int arg;
- int error_code;
-};
-
-#define R3964_MTU 256
-
-
-#ifdef __KERNEL__
struct r3964_block_header;
@@ -226,6 +174,4 @@ struct r3964_info {
int nRetry;
};
-#endif
-
#endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index 5c86e2b..4871170 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -11,45 +11,13 @@
* 2004/02/19 Paul Clements
* Removed PARANOIA, plus various cleanup and comments
*/
-
#ifndef LINUX_NBD_H
#define LINUX_NBD_H
-#include <linux/types.h>
-
-#define NBD_SET_SOCK _IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE _IO( 0xab, 1 )
-#define NBD_SET_SIZE _IO( 0xab, 2 )
-#define NBD_DO_IT _IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK _IO( 0xab, 4 )
-#define NBD_CLEAR_QUE _IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG _IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 )
-#define NBD_DISCONNECT _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-#define NBD_SET_FLAGS _IO( 0xab, 10)
-
-enum {
- NBD_CMD_READ = 0,
- NBD_CMD_WRITE = 1,
- NBD_CMD_DISC = 2,
- /* there is a gap here to match userspace */
- NBD_CMD_TRIM = 4
-};
-
-/* values for flags field */
-#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */
-/* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <uapi/linux/nbd.h>
struct request;
@@ -76,32 +44,3 @@ struct nbd_device {
};
#endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
- __be32 magic;
- __be32 type; /* == READ || == WRITE */
- char handle[8];
- __be64 from;
- __be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
- __be32 magic;
- __be32 error; /* 0 = ok, else error */
- char handle[8]; /* handle you got from request */
-};
-#endif
diff --git a/include/linux/ncp.h b/include/linux/ncp.h
deleted file mode 100644
index 99f0ade..0000000
--- a/include/linux/ncp.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * ncp.h
- *
- * Copyright (C) 1995 by Volker Lendecke
- * Modified for sparc by J.F. Chadima
- * Modified for __constant_ntoh by Frank A. Vorstenbosch
- *
- */
-
-#ifndef _LINUX_NCP_H
-#define _LINUX_NCP_H
-
-#include <linux/types.h>
-
-#define NCP_PTYPE (0x11)
-#define NCP_PORT (0x0451)
-
-#define NCP_ALLOC_SLOT_REQUEST (0x1111)
-#define NCP_REQUEST (0x2222)
-#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
-
-struct ncp_request_header {
- __u16 type;
- __u8 sequence;
- __u8 conn_low;
- __u8 task;
- __u8 conn_high;
- __u8 function;
- __u8 data[0];
-} __attribute__((packed));
-
-#define NCP_REPLY (0x3333)
-#define NCP_WATCHDOG (0x3E3E)
-#define NCP_POSITIVE_ACK (0x9999)
-
-struct ncp_reply_header {
- __u16 type;
- __u8 sequence;
- __u8 conn_low;
- __u8 task;
- __u8 conn_high;
- __u8 completion_code;
- __u8 connection_state;
- __u8 data[0];
-} __attribute__((packed));
-
-#define NCP_VOLNAME_LEN (16)
-#define NCP_NUMBER_OF_VOLUMES (256)
-struct ncp_volume_info {
- __u32 total_blocks;
- __u32 free_blocks;
- __u32 purgeable_blocks;
- __u32 not_yet_purgeable_blocks;
- __u32 total_dir_entries;
- __u32 available_dir_entries;
- __u8 sectors_per_block;
- char volume_name[NCP_VOLNAME_LEN + 1];
-};
-
-#define AR_READ (cpu_to_le16(1))
-#define AR_WRITE (cpu_to_le16(2))
-#define AR_EXCLUSIVE (cpu_to_le16(0x20))
-
-#define NCP_FILE_ID_LEN 6
-
-/* Defines for Name Spaces */
-#define NW_NS_DOS 0
-#define NW_NS_MAC 1
-#define NW_NS_NFS 2
-#define NW_NS_FTAM 3
-#define NW_NS_OS2 4
-
-/* Defines for ReturnInformationMask */
-#define RIM_NAME (cpu_to_le32(1))
-#define RIM_SPACE_ALLOCATED (cpu_to_le32(2))
-#define RIM_ATTRIBUTES (cpu_to_le32(4))
-#define RIM_DATA_SIZE (cpu_to_le32(8))
-#define RIM_TOTAL_SIZE (cpu_to_le32(0x10))
-#define RIM_EXT_ATTR_INFO (cpu_to_le32(0x20))
-#define RIM_ARCHIVE (cpu_to_le32(0x40))
-#define RIM_MODIFY (cpu_to_le32(0x80))
-#define RIM_CREATION (cpu_to_le32(0x100))
-#define RIM_OWNING_NAMESPACE (cpu_to_le32(0x200))
-#define RIM_DIRECTORY (cpu_to_le32(0x400))
-#define RIM_RIGHTS (cpu_to_le32(0x800))
-#define RIM_ALL (cpu_to_le32(0xFFF))
-#define RIM_COMPRESSED_INFO (cpu_to_le32(0x80000000))
-
-/* Defines for NSInfoBitMask */
-#define NSIBM_NFS_NAME 0x0001
-#define NSIBM_NFS_MODE 0x0002
-#define NSIBM_NFS_GID 0x0004
-#define NSIBM_NFS_NLINKS 0x0008
-#define NSIBM_NFS_RDEV 0x0010
-#define NSIBM_NFS_LINK 0x0020
-#define NSIBM_NFS_CREATED 0x0040
-#define NSIBM_NFS_UID 0x0080
-#define NSIBM_NFS_ACSFLAG 0x0100
-#define NSIBM_NFS_MYFLAG 0x0200
-
-/* open/create modes */
-#define OC_MODE_OPEN 0x01
-#define OC_MODE_TRUNCATE 0x02
-#define OC_MODE_REPLACE 0x02
-#define OC_MODE_CREATE 0x08
-
-/* open/create results */
-#define OC_ACTION_NONE 0x00
-#define OC_ACTION_OPEN 0x01
-#define OC_ACTION_CREATE 0x02
-#define OC_ACTION_TRUNCATE 0x04
-#define OC_ACTION_REPLACE 0x04
-
-/* access rights attributes */
-#ifndef AR_READ_ONLY
-#define AR_READ_ONLY 0x0001
-#define AR_WRITE_ONLY 0x0002
-#define AR_DENY_READ 0x0004
-#define AR_DENY_WRITE 0x0008
-#define AR_COMPATIBILITY 0x0010
-#define AR_WRITE_THROUGH 0x0040
-#define AR_OPEN_COMPRESSED 0x0100
-#endif
-
-struct nw_nfs_info {
- __u32 mode;
- __u32 rdev;
-};
-
-struct nw_info_struct {
- __u32 spaceAlloc;
- __le32 attributes;
- __u16 flags;
- __le32 dataStreamSize;
- __le32 totalStreamSize;
- __u16 numberOfStreams;
- __le16 creationTime;
- __le16 creationDate;
- __u32 creatorID;
- __le16 modifyTime;
- __le16 modifyDate;
- __u32 modifierID;
- __le16 lastAccessDate;
- __u16 archiveTime;
- __u16 archiveDate;
- __u32 archiverID;
- __u16 inheritedRightsMask;
- __le32 dirEntNum;
- __le32 DosDirNum;
- __u32 volNumber;
- __u32 EADataSize;
- __u32 EAKeyCount;
- __u32 EAKeySize;
- __u32 NSCreator;
- __u8 nameLen;
- __u8 entryName[256];
- /* libncp may depend on there being nothing after entryName */
-#ifdef __KERNEL__
- struct nw_nfs_info nfs;
-#endif
-} __attribute__((packed));
-
-/* modify mask - use with MODIFY_DOS_INFO structure */
-#define DM_ATTRIBUTES (cpu_to_le32(0x02))
-#define DM_CREATE_DATE (cpu_to_le32(0x04))
-#define DM_CREATE_TIME (cpu_to_le32(0x08))
-#define DM_CREATOR_ID (cpu_to_le32(0x10))
-#define DM_ARCHIVE_DATE (cpu_to_le32(0x20))
-#define DM_ARCHIVE_TIME (cpu_to_le32(0x40))
-#define DM_ARCHIVER_ID (cpu_to_le32(0x80))
-#define DM_MODIFY_DATE (cpu_to_le32(0x0100))
-#define DM_MODIFY_TIME (cpu_to_le32(0x0200))
-#define DM_MODIFIER_ID (cpu_to_le32(0x0400))
-#define DM_LAST_ACCESS_DATE (cpu_to_le32(0x0800))
-#define DM_INHERITED_RIGHTS_MASK (cpu_to_le32(0x1000))
-#define DM_MAXIMUM_SPACE (cpu_to_le32(0x2000))
-
-struct nw_modify_dos_info {
- __le32 attributes;
- __le16 creationDate;
- __le16 creationTime;
- __u32 creatorID;
- __le16 modifyDate;
- __le16 modifyTime;
- __u32 modifierID;
- __u16 archiveDate;
- __u16 archiveTime;
- __u32 archiverID;
- __le16 lastAccessDate;
- __u16 inheritanceGrantMask;
- __u16 inheritanceRevokeMask;
- __u32 maximumSpace;
-} __attribute__((packed));
-
-struct nw_search_sequence {
- __u8 volNumber;
- __u32 dirBase;
- __u32 sequence;
-} __attribute__((packed));
-
-#endif /* _LINUX_NCP_H */
diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h
deleted file mode 100644
index e13eefe..0000000
--- a/include/linux/ncp_fs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * ncp_fs.h
- *
- * Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_FS_H
-#define _LINUX_NCP_FS_H
-
-#include <linux/fs.h>
-#include <linux/in.h>
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#include <linux/ipx.h>
-#include <linux/ncp_no.h>
-
-/*
- * ioctl commands
- */
-
-struct ncp_ioctl_request {
- unsigned int function;
- unsigned int size;
- char __user *data;
-};
-
-struct ncp_fs_info {
- int version;
- struct sockaddr_ipx addr;
- __kernel_uid_t mounted_uid;
- int connection; /* Connection number the server assigned us */
- int buffer_size; /* The negotiated buffer size, to be
- used for read/write requests! */
-
- int volume_number;
- __le32 directory_id;
-};
-
-struct ncp_fs_info_v2 {
- int version;
- unsigned long mounted_uid;
- unsigned int connection;
- unsigned int buffer_size;
-
- unsigned int volume_number;
- __le32 directory_id;
-
- __u32 dummy1;
- __u32 dummy2;
- __u32 dummy3;
-};
-
-struct ncp_sign_init
-{
- char sign_root[8];
- char sign_last[16];
-};
-
-struct ncp_lock_ioctl
-{
-#define NCP_LOCK_LOG 0
-#define NCP_LOCK_SH 1
-#define NCP_LOCK_EX 2
-#define NCP_LOCK_CLEAR 256
- int cmd;
- int origin;
- unsigned int offset;
- unsigned int length;
-#define NCP_LOCK_DEFAULT_TIMEOUT 18
-#define NCP_LOCK_MAX_TIMEOUT 180
- int timeout;
-};
-
-struct ncp_setroot_ioctl
-{
- int volNumber;
- int namespace;
- __le32 dirEntNum;
-};
-
-struct ncp_objectname_ioctl
-{
-#define NCP_AUTH_NONE 0x00
-#define NCP_AUTH_BIND 0x31
-#define NCP_AUTH_NDS 0x32
- int auth_type;
- size_t object_name_len;
- void __user * object_name; /* a userspace data, in most cases user name */
-};
-
-struct ncp_privatedata_ioctl
-{
- size_t len;
- void __user * data; /* ~1000 for NDS */
-};
-
-/* NLS charsets by ioctl */
-#define NCP_IOCSNAME_LEN 20
-struct ncp_nls_ioctl
-{
- unsigned char codepage[NCP_IOCSNAME_LEN+1];
- unsigned char iocharset[NCP_IOCSNAME_LEN+1];
-};
-
-#define NCP_IOC_NCPREQUEST _IOR('n', 1, struct ncp_ioctl_request)
-#define NCP_IOC_GETMOUNTUID _IOW('n', 2, __kernel_old_uid_t)
-#define NCP_IOC_GETMOUNTUID2 _IOW('n', 2, unsigned long)
-
-#define NCP_IOC_CONN_LOGGED_IN _IO('n', 3)
-
-#define NCP_GET_FS_INFO_VERSION (1)
-#define NCP_IOC_GET_FS_INFO _IOWR('n', 4, struct ncp_fs_info)
-#define NCP_GET_FS_INFO_VERSION_V2 (2)
-#define NCP_IOC_GET_FS_INFO_V2 _IOWR('n', 4, struct ncp_fs_info_v2)
-
-#define NCP_IOC_SIGN_INIT _IOR('n', 5, struct ncp_sign_init)
-#define NCP_IOC_SIGN_WANTED _IOR('n', 6, int)
-#define NCP_IOC_SET_SIGN_WANTED _IOW('n', 6, int)
-
-#define NCP_IOC_LOCKUNLOCK _IOR('n', 7, struct ncp_lock_ioctl)
-
-#define NCP_IOC_GETROOT _IOW('n', 8, struct ncp_setroot_ioctl)
-#define NCP_IOC_SETROOT _IOR('n', 8, struct ncp_setroot_ioctl)
-
-#define NCP_IOC_GETOBJECTNAME _IOWR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_SETOBJECTNAME _IOR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_GETPRIVATEDATA _IOWR('n', 10, struct ncp_privatedata_ioctl)
-#define NCP_IOC_SETPRIVATEDATA _IOR('n', 10, struct ncp_privatedata_ioctl)
-
-#define NCP_IOC_GETCHARSETS _IOWR('n', 11, struct ncp_nls_ioctl)
-#define NCP_IOC_SETCHARSETS _IOR('n', 11, struct ncp_nls_ioctl)
-
-#define NCP_IOC_GETDENTRYTTL _IOW('n', 12, __u32)
-#define NCP_IOC_SETDENTRYTTL _IOR('n', 12, __u32)
-
-/*
- * The packet size to allocate. One page should be enough.
- */
-#define NCP_PACKET_SIZE 4070
-
-#define NCP_MAXPATHLEN 255
-#define NCP_MAXNAMELEN 14
-
-#endif /* _LINUX_NCP_FS_H */
diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h
deleted file mode 100644
index dfcbea2..0000000
--- a/include/linux/ncp_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ncp_mount.h
- *
- * Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_MOUNT_H
-#define _LINUX_NCP_MOUNT_H
-
-#include <linux/types.h>
-#include <linux/ncp.h>
-
-#define NCP_MOUNT_VERSION 3 /* Binary */
-
-/* Values for flags */
-#define NCP_MOUNT_SOFT 0x0001
-#define NCP_MOUNT_INTR 0x0002
-#define NCP_MOUNT_STRONG 0x0004 /* enable delete/rename of r/o files */
-#define NCP_MOUNT_NO_OS2 0x0008 /* do not use OS/2 (LONG) namespace */
-#define NCP_MOUNT_NO_NFS 0x0010 /* do not use NFS namespace */
-#define NCP_MOUNT_EXTRAS 0x0020
-#define NCP_MOUNT_SYMLINKS 0x0040 /* enable symlinks */
-#define NCP_MOUNT_NFS_EXTRAS 0x0080 /* Enable use of NFS NS meta-info */
-
-struct ncp_mount_data {
- int version;
- unsigned int ncp_fd; /* The socket to the ncp port */
- __kernel_uid_t mounted_uid; /* Who may umount() this filesystem? */
- __kernel_pid_t wdog_pid; /* Who cares for our watchdog packets? */
-
- unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
- unsigned int time_out; /* How long should I wait after
- sending a NCP request? */
- unsigned int retry_count; /* And how often should I retry? */
- unsigned int flags;
-
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_mode_t file_mode;
- __kernel_mode_t dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V4 (4) /* Binary or text */
-
-struct ncp_mount_data_v4 {
- int version;
- unsigned long flags; /* NCP_MOUNT_* flags */
- /* MIPS uses long __kernel_uid_t, but... */
- /* we neever pass -1, so it is safe */
- unsigned long mounted_uid; /* Who may umount() this filesystem? */
- /* MIPS uses long __kernel_pid_t */
- long wdog_pid; /* Who cares for our watchdog packets? */
-
- unsigned int ncp_fd; /* The socket to the ncp port */
- unsigned int time_out; /* How long should I wait after
- sending a NCP request? */
- unsigned int retry_count; /* And how often should I retry? */
-
- /* MIPS uses long __kernel_uid_t... */
- /* we never pass -1, so it is safe */
- unsigned long uid;
- unsigned long gid;
- /* MIPS uses unsigned long __kernel_mode_t */
- unsigned long file_mode;
- unsigned long dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V5 (5) /* Text only */
-
-#endif
diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h
deleted file mode 100644
index cddaa48..0000000
--- a/include/linux/ncp_no.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _NCP_NO
-#define _NCP_NO
-
-/* these define the attribute byte as seen by NCP */
-#define aRONLY (__cpu_to_le32(1))
-#define aHIDDEN (__cpu_to_le32(2))
-#define aSYSTEM (__cpu_to_le32(4))
-#define aEXECUTE (__cpu_to_le32(8))
-#define aDIR (__cpu_to_le32(0x10))
-#define aARCH (__cpu_to_le32(0x20))
-#define aSHARED (__cpu_to_le32(0x80))
-#define aDONTSUBALLOCATE (__cpu_to_le32(1L<<11))
-#define aTRANSACTIONAL (__cpu_to_le32(1L<<12))
-#define aPURGE (__cpu_to_le32(1L<<16))
-#define aRENAMEINHIBIT (__cpu_to_le32(1L<<17))
-#define aDELETEINHIBIT (__cpu_to_le32(1L<<18))
-#define aDONTCOMPRESS (__cpu_to_le32(1L<<27))
-
-#endif /* _NCP_NO */
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
deleted file mode 100644
index 275e5d6..0000000
--- a/include/linux/neighbour.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef __LINUX_NEIGHBOUR_H
-#define __LINUX_NEIGHBOUR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ndmsg {
- __u8 ndm_family;
- __u8 ndm_pad1;
- __u16 ndm_pad2;
- __s32 ndm_ifindex;
- __u16 ndm_state;
- __u8 ndm_flags;
- __u8 ndm_type;
-};
-
-enum {
- NDA_UNSPEC,
- NDA_DST,
- NDA_LLADDR,
- NDA_CACHEINFO,
- NDA_PROBES,
- __NDA_MAX
-};
-
-#define NDA_MAX (__NDA_MAX - 1)
-
-/*
- * Neighbor Cache Entry Flags
- */
-
-#define NTF_USE 0x01
-#define NTF_PROXY 0x08 /* == ATF_PUBL */
-#define NTF_ROUTER 0x80
-
-#define NTF_SELF 0x02
-#define NTF_MASTER 0x04
-
-/*
- * Neighbor Cache Entry States.
- */
-
-#define NUD_INCOMPLETE 0x01
-#define NUD_REACHABLE 0x02
-#define NUD_STALE 0x04
-#define NUD_DELAY 0x08
-#define NUD_PROBE 0x10
-#define NUD_FAILED 0x20
-
-/* Dummy states */
-#define NUD_NOARP 0x40
-#define NUD_PERMANENT 0x80
-#define NUD_NONE 0x00
-
-/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
- and make no address resolution or NUD.
- NUD_PERMANENT is also cannot be deleted by garbage collectors.
- */
-
-struct nda_cacheinfo {
- __u32 ndm_confirmed;
- __u32 ndm_used;
- __u32 ndm_updated;
- __u32 ndm_refcnt;
-};
-
-/*****************************************************************
- * Neighbour tables specific messages.
- *
- * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
- * NLM_F_DUMP flag set. Every neighbour table configuration is
- * spread over multiple messages to avoid running into message
- * size limits on systems with many interfaces. The first message
- * in the sequence transports all not device specific data such as
- * statistics, configuration, and the default parameter set.
- * This message is followed by 0..n messages carrying device
- * specific parameter sets.
- * Although the ordering should be sufficient, NDTA_NAME can be
- * used to identify sequences. The initial message can be identified
- * by checking for NDTA_CONFIG. The device specific messages do
- * not contain this TLV but have NDTPA_IFINDEX set to the
- * corresponding interface index.
- *
- * To change neighbour table attributes, send RTM_SETNEIGHTBL
- * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
- * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
- * otherwise. Device specific parameter sets can be changed by
- * setting NDTPA_IFINDEX to the interface index of the corresponding
- * device.
- ****/
-
-struct ndt_stats {
- __u64 ndts_allocs;
- __u64 ndts_destroys;
- __u64 ndts_hash_grows;
- __u64 ndts_res_failed;
- __u64 ndts_lookups;
- __u64 ndts_hits;
- __u64 ndts_rcv_probes_mcast;
- __u64 ndts_rcv_probes_ucast;
- __u64 ndts_periodic_gc_runs;
- __u64 ndts_forced_gc_runs;
-};
-
-enum {
- NDTPA_UNSPEC,
- NDTPA_IFINDEX, /* u32, unchangeable */
- NDTPA_REFCNT, /* u32, read-only */
- NDTPA_REACHABLE_TIME, /* u64, read-only, msecs */
- NDTPA_BASE_REACHABLE_TIME, /* u64, msecs */
- NDTPA_RETRANS_TIME, /* u64, msecs */
- NDTPA_GC_STALETIME, /* u64, msecs */
- NDTPA_DELAY_PROBE_TIME, /* u64, msecs */
- NDTPA_QUEUE_LEN, /* u32 */
- NDTPA_APP_PROBES, /* u32 */
- NDTPA_UCAST_PROBES, /* u32 */
- NDTPA_MCAST_PROBES, /* u32 */
- NDTPA_ANYCAST_DELAY, /* u64, msecs */
- NDTPA_PROXY_DELAY, /* u64, msecs */
- NDTPA_PROXY_QLEN, /* u32 */
- NDTPA_LOCKTIME, /* u64, msecs */
- NDTPA_QUEUE_LENBYTES, /* u32 */
- __NDTPA_MAX
-};
-#define NDTPA_MAX (__NDTPA_MAX - 1)
-
-struct ndtmsg {
- __u8 ndtm_family;
- __u8 ndtm_pad1;
- __u16 ndtm_pad2;
-};
-
-struct ndt_config {
- __u16 ndtc_key_len;
- __u16 ndtc_entry_size;
- __u32 ndtc_entries;
- __u32 ndtc_last_flush; /* delta to now in msecs */
- __u32 ndtc_last_rand; /* delta to now in msecs */
- __u32 ndtc_hash_rnd;
- __u32 ndtc_hash_mask;
- __u32 ndtc_hash_chain_gc;
- __u32 ndtc_proxy_qlen;
-};
-
-enum {
- NDTA_UNSPEC,
- NDTA_NAME, /* char *, unchangeable */
- NDTA_THRESH1, /* u32 */
- NDTA_THRESH2, /* u32 */
- NDTA_THRESH3, /* u32 */
- NDTA_CONFIG, /* struct ndt_config, read-only */
- NDTA_PARMS, /* nested TLV NDTPA_* */
- NDTA_STATS, /* struct ndt_stats, read-only */
- NDTA_GC_INTERVAL, /* u64, msecs */
- __NDTA_MAX
-};
-#define NDTA_MAX (__NDTA_MAX - 1)
-
-#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index 6ab31ca..aa16731 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,49 +18,13 @@
#ifndef _LINUX_NET_H
#define _LINUX_NET_H
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO AF_MAX
-
-#define SYS_SOCKET 1 /* sys_socket(2) */
-#define SYS_BIND 2 /* sys_bind(2) */
-#define SYS_CONNECT 3 /* sys_connect(2) */
-#define SYS_LISTEN 4 /* sys_listen(2) */
-#define SYS_ACCEPT 5 /* sys_accept(2) */
-#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */
-#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */
-#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */
-#define SYS_SEND 9 /* sys_send(2) */
-#define SYS_RECV 10 /* sys_recv(2) */
-#define SYS_SENDTO 11 /* sys_sendto(2) */
-#define SYS_RECVFROM 12 /* sys_recvfrom(2) */
-#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */
-#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */
-#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */
-#define SYS_SENDMSG 16 /* sys_sendmsg(2) */
-#define SYS_RECVMSG 17 /* sys_recvmsg(2) */
-#define SYS_ACCEPT4 18 /* sys_accept4(2) */
-#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */
-#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */
-
-typedef enum {
- SS_FREE = 0, /* not allocated */
- SS_UNCONNECTED, /* unconnected to any socket */
- SS_CONNECTING, /* in process of connecting */
- SS_CONNECTED, /* connected to socket */
- SS_DISCONNECTING /* in process of disconnecting */
-} socket_state;
-
-#define __SO_ACCEPTCON (1 << 16) /* performed a listen */
-
-#ifdef __KERNEL__
#include <linux/stringify.h>
#include <linux/random.h>
#include <linux/wait.h>
#include <linux/fcntl.h> /* For O_CLOEXEC and O_NONBLOCK */
#include <linux/kmemcheck.h>
#include <linux/rcupdate.h>
+#include <uapi/linux/net.h>
struct poll_table_struct;
struct pipe_inode_info;
@@ -319,5 +283,4 @@ extern int kernel_sock_shutdown(struct socket *sock,
#define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \
MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
name)
-#endif /* __KERNEL__ */
#endif /* _LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
deleted file mode 100644
index 2a73946..0000000
--- a/include/linux/net_dropmon.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __NET_DROPMON_H
-#define __NET_DROPMON_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct net_dm_drop_point {
- __u8 pc[8];
- __u32 count;
-};
-
-#define is_drop_point_hw(x) do {\
- int ____i, ____j;\
- for (____i = 0; ____i < 8; i ____i++)\
- ____j |= x[____i];\
- ____j;\
-} while (0)
-
-#define NET_DM_CFG_VERSION 0
-#define NET_DM_CFG_ALERT_COUNT 1
-#define NET_DM_CFG_ALERT_DELAY 2
-#define NET_DM_CFG_MAX 3
-
-struct net_dm_config_entry {
- __u32 type;
- __u64 data __attribute__((aligned(8)));
-};
-
-struct net_dm_config_msg {
- __u32 entries;
- struct net_dm_config_entry options[0];
-};
-
-struct net_dm_alert_msg {
- __u32 entries;
- struct net_dm_drop_point points[0];
-};
-
-struct net_dm_user_msg {
- union {
- struct net_dm_config_msg user;
- struct net_dm_alert_msg alert;
- } u;
-};
-
-
-/* These are the netlink message types for this protocol */
-
-enum {
- NET_DM_CMD_UNSPEC = 0,
- NET_DM_CMD_ALERT,
- NET_DM_CMD_CONFIG,
- NET_DM_CMD_START,
- NET_DM_CMD_STOP,
- _NET_DM_CMD_MAX,
-};
-
-#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
-
-/*
- * Our group identifiers
- */
-#define NET_DM_GRP_ALERT 1
-#endif
diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h
deleted file mode 100644
index ae5df12..0000000
--- a/include/linux/net_tstamp.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Userspace API for hardware time stamping of network packets
- *
- * Copyright (C) 2008,2009 Intel Corporation
- * Author: Patrick Ohly <patrick.ohly@intel.com>
- *
- */
-
-#ifndef _NET_TIMESTAMPING_H
-#define _NET_TIMESTAMPING_H
-
-#include <linux/socket.h> /* for SO_TIMESTAMPING */
-
-/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
-enum {
- SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
- SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
- SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
- SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
- SOF_TIMESTAMPING_SOFTWARE = (1<<4),
- SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
- SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
- SOF_TIMESTAMPING_MASK =
- (SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
- SOF_TIMESTAMPING_RAW_HARDWARE
-};
-
-/**
- * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
- *
- * @flags: no flags defined right now, must be zero
- * @tx_type: one of HWTSTAMP_TX_*
- * @rx_type: one of one of HWTSTAMP_FILTER_*
- *
- * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
- * this structure. dev_ifsioc() in the kernel takes care of the
- * translation between 32 bit userspace and 64 bit kernel. The
- * structure is intentionally chosen so that it has the same layout on
- * 32 and 64 bit systems, don't break this!
- */
-struct hwtstamp_config {
- int flags;
- int tx_type;
- int rx_filter;
-};
-
-/* possible values for hwtstamp_config->tx_type */
-enum hwtstamp_tx_types {
- /*
- * No outgoing packet will need hardware time stamping;
- * should a packet arrive which asks for it, no hardware
- * time stamping will be done.
- */
- HWTSTAMP_TX_OFF,
-
- /*
- * Enables hardware time stamping for outgoing packets;
- * the sender of the packet decides which are to be
- * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
- * before sending the packet.
- */
- HWTSTAMP_TX_ON,
-
- /*
- * Enables time stamping for outgoing packets just as
- * HWTSTAMP_TX_ON does, but also enables time stamp insertion
- * directly into Sync packets. In this case, transmitted Sync
- * packets will not received a time stamp via the socket error
- * queue.
- */
- HWTSTAMP_TX_ONESTEP_SYNC,
-};
-
-/* possible values for hwtstamp_config->rx_filter */
-enum hwtstamp_rx_filters {
- /* time stamp no incoming packet at all */
- HWTSTAMP_FILTER_NONE,
-
- /* time stamp any incoming packet */
- HWTSTAMP_FILTER_ALL,
-
- /* return value: time stamp all packets requested plus some others */
- HWTSTAMP_FILTER_SOME,
-
- /* PTP v1, UDP, any kind of event packet */
- HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
- /* PTP v1, UDP, Sync packet */
- HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
- /* PTP v1, UDP, Delay_req packet */
- HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
- /* PTP v2, UDP, any kind of event packet */
- HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
- /* PTP v2, UDP, Sync packet */
- HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
- /* PTP v2, UDP, Delay_req packet */
- HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
-
- /* 802.AS1, Ethernet, any kind of event packet */
- HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
- /* 802.AS1, Ethernet, Sync packet */
- HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
- /* 802.AS1, Ethernet, Delay_req packet */
- HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
-
- /* PTP v2/802.AS1, any layer, any kind of event packet */
- HWTSTAMP_FILTER_PTP_V2_EVENT,
- /* PTP v2/802.AS1, any layer, Sync packet */
- HWTSTAMP_FILTER_PTP_V2_SYNC,
- /* PTP v2/802.AS1, any layer, Delay_req packet */
- HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
-};
-
-#endif /* _NET_TIMESTAMPING_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 561c8bc..f8eda02 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -25,12 +25,6 @@
#ifndef _LINUX_NETDEVICE_H
#define _LINUX_NETDEVICE_H
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
#include <linux/pm_qos.h>
#include <linux/timer.h>
#include <linux/bug.h>
@@ -55,6 +49,7 @@
#include <linux/netdev_features.h>
#include <linux/neighbour.h>
+#include <uapi/linux/netdevice.h>
struct netpoll_info;
struct device;
@@ -133,14 +128,6 @@ static inline bool dev_xmit_complete(int rc)
return false;
}
-#endif
-
-#define MAX_ADDR_LEN 32 /* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP 0
-
-#ifdef __KERNEL__
/*
* Compute the worst case header length according to the protocols
* used.
@@ -196,21 +183,6 @@ struct net_device_stats {
unsigned long tx_compressed;
};
-#endif /* __KERNEL__ */
-
-
-/* Media selection options. */
-enum {
- IF_PORT_UNKNOWN = 0,
- IF_PORT_10BASE2,
- IF_PORT_10BASET,
- IF_PORT_AUI,
- IF_PORT_100BASET,
- IF_PORT_100BASETX,
- IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
#include <linux/cache.h>
#include <linux/skbuff.h>
@@ -2844,6 +2816,4 @@ do { \
})
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 1dcf2a3..ee14284 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -1,7 +1,6 @@
#ifndef __LINUX_NETFILTER_H
#define __LINUX_NETFILTER_H
-#ifdef __KERNEL__
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/net.h>
@@ -10,75 +9,7 @@
#include <linux/in6.h>
#include <linux/wait.h>
#include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
- <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
- NF_INET_PRE_ROUTING,
- NF_INET_LOCAL_IN,
- NF_INET_FORWARD,
- NF_INET_LOCAL_OUT,
- NF_INET_POST_ROUTING,
- NF_INET_NUMHOOKS
-};
-
-enum {
- NFPROTO_UNSPEC = 0,
- NFPROTO_IPV4 = 2,
- NFPROTO_ARP = 3,
- NFPROTO_BRIDGE = 7,
- NFPROTO_IPV6 = 10,
- NFPROTO_DECNET = 12,
- NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
- __u32 all[4];
- __be32 ip;
- __be32 ip6[4];
- struct in_addr in;
- struct in6_addr in6;
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter.h>
#ifdef CONFIG_NETFILTER
static inline int NF_DROP_GETERR(int verdict)
{
@@ -411,5 +342,4 @@ extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook;
static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
#endif
-#endif /*__KERNEL__*/
#endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_arp.h b/include/linux/netfilter_arp.h
deleted file mode 100644
index 92bc6dd..0000000
--- a/include/linux/netfilter_arp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_ARP_NETFILTER_H
-#define __LINUX_ARP_NETFILTER_H
-
-/* ARP-specific defines for netfilter.
- * (C)2002 Rusty Russell IBM -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* There is no PF_ARP. */
-#define NF_ARP 0
-
-/* ARP Hooks */
-#define NF_ARP_IN 0
-#define NF_ARP_OUT 1
-#define NF_ARP_FORWARD 2
-#define NF_ARP_NUMHOOKS 3
-
-#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 31d2844..dfb4d9e 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -1,30 +1,8 @@
#ifndef __LINUX_BRIDGE_NETFILTER_H
#define __LINUX_BRIDGE_NETFILTER_H
-/* bridge-specific defines for netfilter.
- */
-
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING 4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING 5
-#define NF_BR_NUMHOOKS 6
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter_bridge.h>
+
enum nf_br_hook_priorities {
NF_BR_PRI_FIRST = INT_MIN,
@@ -118,5 +96,4 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb)
#define br_drop_fake_rtable(skb) do { } while (0)
#endif /* CONFIG_BRIDGE_NETFILTER */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h
deleted file mode 100644
index 0b09732..0000000
--- a/include/linux/netfilter_decnet.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __LINUX_DECNET_NETFILTER_H
-#define __LINUX_DECNET_NETFILTER_H
-
-/* DECnet-specific defines for netfilter.
- * This file (C) Steve Whitehouse 1999 derived from the
- * ipv4 netfilter header file which is
- * (C)1998 Rusty Russell -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_DN_SRC 0x0001
-/* Dest IP address. */
-#define NFC_DN_DST 0x0002
-/* Input device. */
-#define NFC_DN_IF_IN 0x0004
-/* Output device. */
-#define NFC_DN_IF_OUT 0x0008
-#endif /* ! __KERNEL__ */
-
-/* DECnet Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_DN_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_DN_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_DN_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_DN_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_DN_POST_ROUTING 4
-/* Input Hello Packets */
-#define NF_DN_HELLO 5
-/* Input Routing Packets */
-#define NF_DN_ROUTE 6
-#define NF_DN_NUMHOOKS 7
-
-enum nf_dn_hook_priorities {
- NF_DN_PRI_FIRST = INT_MIN,
- NF_DN_PRI_CONNTRACK = -200,
- NF_DN_PRI_MANGLE = -150,
- NF_DN_PRI_NAT_DST = -100,
- NF_DN_PRI_FILTER = 0,
- NF_DN_PRI_NAT_SRC = 100,
- NF_DN_PRI_DNRTMSG = 200,
- NF_DN_PRI_LAST = INT_MAX,
-};
-
-struct nf_dn_rtmsg {
- int nfdn_ifindex;
-};
-
-#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define DNRMG_L1_GROUP 0x01
-#define DNRMG_L2_GROUP 0x02
-#endif
-
-enum {
- DNRNG_NLGRP_NONE,
-#define DNRNG_NLGRP_NONE DNRNG_NLGRP_NONE
- DNRNG_NLGRP_L1,
-#define DNRNG_NLGRP_L1 DNRNG_NLGRP_L1
- DNRNG_NLGRP_L2,
-#define DNRNG_NLGRP_L2 DNRNG_NLGRP_L2
- __DNRNG_NLGRP_MAX
-};
-#define DNRNG_NLGRP_MAX (__DNRNG_NLGRP_MAX - 1)
-
-#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index b962dfc..dfaf116 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -1,86 +1,12 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
/* IPv4-specific defines for netfilter.
* (C)1998 Rusty Russell -- This code is GPL.
*/
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC 0x0001
-/* Dest IP address. */
-#define NFC_IP_DST 0x0002
-/* Input device. */
-#define NFC_IP_IF_IN 0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT 0x0008
-/* TOS. */
-#define NFC_IP_TOS 0x0010
-/* Protocol. */
-#define NFC_IP_PROTO 0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS 0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG 0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS 0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT 0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT 0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN 0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING 4
-#define NF_IP_NUMHOOKS 5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
- NF_IP_PRI_FIRST = INT_MIN,
- NF_IP_PRI_CONNTRACK_DEFRAG = -400,
- NF_IP_PRI_RAW = -300,
- NF_IP_PRI_SELINUX_FIRST = -225,
- NF_IP_PRI_CONNTRACK = -200,
- NF_IP_PRI_MANGLE = -150,
- NF_IP_PRI_NAT_DST = -100,
- NF_IP_PRI_FILTER = 0,
- NF_IP_PRI_SECURITY = 50,
- NF_IP_PRI_NAT_SRC = 100,
- NF_IP_PRI_SELINUX_LAST = 225,
- NF_IP_PRI_CONNTRACK_HELPER = 300,
- NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
- NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
+#include <uapi/linux/netfilter_ipv4.h>
-#ifdef __KERNEL__
extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
#endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 7c8a513..98ffb54 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -1,81 +1,14 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
/* IPv6-specific defines for netfilter.
* (C)1998 Rusty Russell -- This code is GPL.
* (C)1999 David Jeffery
* this header was blatantly ripped from netfilter_ipv4.h
* it's amazing what adding a bunch of 6s can do =8^)
*/
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC 0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST 0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN 0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT 0x0008
-/* TOS. */
-#define NFC_IP6_TOS 0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO 0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS 0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG 0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS 0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT 0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT 0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN 0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING 4
-#define NF_IP6_NUMHOOKS 5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
- NF_IP6_PRI_FIRST = INT_MIN,
- NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
- NF_IP6_PRI_RAW = -300,
- NF_IP6_PRI_SELINUX_FIRST = -225,
- NF_IP6_PRI_CONNTRACK = -200,
- NF_IP6_PRI_MANGLE = -150,
- NF_IP6_PRI_NAT_DST = -100,
- NF_IP6_PRI_FILTER = 0,
- NF_IP6_PRI_SECURITY = 50,
- NF_IP6_PRI_NAT_SRC = 100,
- NF_IP6_PRI_SELINUX_LAST = 225,
- NF_IP6_PRI_CONNTRACK_HELPER = 300,
- NF_IP6_PRI_LAST = INT_MAX,
-};
+#include <uapi/linux/netfilter_ipv6.h>
-#ifdef __KERNEL__
#ifdef CONFIG_NETFILTER
extern int ip6_route_me_harder(struct sk_buff *skb);
@@ -89,6 +22,4 @@ static inline int ipv6_netfilter_init(void) { return 0; }
static inline void ipv6_netfilter_fini(void) { return; }
#endif /* CONFIG_NETFILTER */
-#endif /* __KERNEL__ */
-
#endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 6d3af05c..e0f746b 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,160 +1,12 @@
#ifndef __LINUX_NETLINK_H
#define __LINUX_NETLINK_H
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE 0 /* Routing/device hook */
-#define NETLINK_UNUSED 1 /* Unused number */
-#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */
-#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */
-#define NETLINK_SOCK_DIAG 4 /* socket monitoring */
-#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */
-#define NETLINK_XFRM 6 /* ipsec */
-#define NETLINK_SELINUX 7 /* SELinux event notifications */
-#define NETLINK_ISCSI 8 /* Open-iSCSI */
-#define NETLINK_AUDIT 9 /* auditing */
-#define NETLINK_FIB_LOOKUP 10
-#define NETLINK_CONNECTOR 11
-#define NETLINK_NETFILTER 12 /* netfilter subsystem */
-#define NETLINK_IP6_FW 13
-#define NETLINK_DNRTMSG 14 /* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */
-#define NETLINK_GENERIC 16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */
-#define NETLINK_ECRYPTFS 19
-#define NETLINK_RDMA 20
-#define NETLINK_CRYPTO 21 /* Crypto layer */
-
-#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32
-
-struct sockaddr_nl {
- __kernel_sa_family_t nl_family; /* AF_NETLINK */
- unsigned short nl_pad; /* zero */
- __u32 nl_pid; /* port ID */
- __u32 nl_groups; /* multicast groups mask */
-};
-
-struct nlmsghdr {
- __u32 nlmsg_len; /* Length of message including header */
- __u16 nlmsg_type; /* Message content */
- __u16 nlmsg_flags; /* Additional flags */
- __u32 nlmsg_seq; /* Sequence number */
- __u32 nlmsg_pid; /* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST 1 /* It is request message. */
-#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */
-#define NLM_F_ECHO 8 /* Echo this request */
-#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT 0x100 /* specify tree root */
-#define NLM_F_MATCH 0x200 /* return all matching */
-#define NLM_F_ATOMIC 0x400 /* atomic GET */
-#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE 0x100 /* Override existing */
-#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */
-#define NLM_F_CREATE 0x400 /* Create, if it does not exist */
-#define NLM_F_APPEND 0x800 /* Add to end of list */
-
-/*
- 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL
- 4.4BSD CHANGE NLM_F_REPLACE
-
- True CHANGE NLM_F_CREATE|NLM_F_REPLACE
- Append NLM_F_CREATE
- Check NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO 4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
- (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
- (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
- (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP 0x1 /* Nothing. */
-#define NLMSG_ERROR 0x2 /* Error */
-#define NLMSG_DONE 0x3 /* End of a dump */
-#define NLMSG_OVERRUN 0x4 /* Data lost */
-
-#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */
-
-struct nlmsgerr {
- int error;
- struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP 1
-#define NETLINK_DROP_MEMBERSHIP 2
-#define NETLINK_PKTINFO 3
-#define NETLINK_BROADCAST_ERROR 4
-#define NETLINK_NO_ENOBUFS 5
-
-struct nl_pktinfo {
- __u32 group;
-};
-
-#define NET_MAJOR 36 /* Major 36 is reserved for networking */
-
-enum {
- NETLINK_UNCONNECTED = 0,
- NETLINK_CONNECTED,
-};
-
-/*
- * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * | Header | Pad | Payload | Pad |
- * | (struct nlattr) | ing | | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
- __u16 nla_len;
- __u16 nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED (1 << 15)
-#define NLA_F_NET_BYTEORDER (1 << 14)
-#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO 4
-#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
#include <linux/capability.h>
#include <linux/skbuff.h>
#include <linux/export.h>
#include <net/scm.h>
+#include <uapi/linux/netlink.h>
struct net;
@@ -283,6 +135,4 @@ static inline int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
return __netlink_dump_start(ssk, skb, nlh, control);
}
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_NETLINK_H */
diff --git a/include/linux/netrom.h b/include/linux/netrom.h
deleted file mode 100644
index af7313c..0000000
--- a/include/linux/netrom.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * These are the public elements of the Linux kernel NET/ROM implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef NETROM_KERNEL_H
-#define NETROM_KERNEL_H
-
-#include <linux/ax25.h>
-
-#define NETROM_MTU 236
-
-#define NETROM_T1 1
-#define NETROM_T2 2
-#define NETROM_N2 3
-#define NETROM_T4 6
-#define NETROM_IDLE 7
-
-#define SIOCNRDECOBS (SIOCPROTOPRIVATE+2)
-
-struct nr_route_struct {
-#define NETROM_NEIGH 0
-#define NETROM_NODE 1
- int type;
- ax25_address callsign;
- char device[16];
- unsigned int quality;
- char mnemonic[7];
- ax25_address neighbour;
- unsigned int obs_count;
- unsigned int ndigis;
- ax25_address digipeaters[AX25_MAX_DIGIS];
-};
-
-#endif
diff --git a/include/linux/nfc.h b/include/linux/nfc.h
deleted file mode 100644
index d908d17..0000000
--- a/include/linux/nfc.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2011 Instituto Nokia de Tecnologia
- *
- * Authors:
- * Lauro Ramos Venancio <lauro.venancio@openbossa.org>
- * Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __LINUX_NFC_H
-#define __LINUX_NFC_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define NFC_GENL_NAME "nfc"
-#define NFC_GENL_VERSION 1
-
-#define NFC_GENL_MCAST_EVENT_NAME "events"
-
-/**
- * enum nfc_commands - supported nfc commands
- *
- * @NFC_CMD_UNSPEC: unspecified command
- *
- * @NFC_CMD_GET_DEVICE: request information about a device (requires
- * %NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices
- * @NFC_CMD_DEV_UP: turn on the nfc device
- * (requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_DEV_DOWN: turn off the nfc device
- * (requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_START_POLL: start polling for targets using the given protocols
- * (requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS)
- * @NFC_CMD_STOP_POLL: stop polling for targets (requires
- * %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires
- * %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found
- * (it sends %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred
- * (it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and
- * %NFC_ATTR_PROTOCOLS)
- * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed
- * (it sends %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in
- * target mode.
- * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated
- * from target mode.
- */
-enum nfc_commands {
- NFC_CMD_UNSPEC,
- NFC_CMD_GET_DEVICE,
- NFC_CMD_DEV_UP,
- NFC_CMD_DEV_DOWN,
- NFC_CMD_DEP_LINK_UP,
- NFC_CMD_DEP_LINK_DOWN,
- NFC_CMD_START_POLL,
- NFC_CMD_STOP_POLL,
- NFC_CMD_GET_TARGET,
- NFC_EVENT_TARGETS_FOUND,
- NFC_EVENT_DEVICE_ADDED,
- NFC_EVENT_DEVICE_REMOVED,
- NFC_EVENT_TARGET_LOST,
- NFC_EVENT_TM_ACTIVATED,
- NFC_EVENT_TM_DEACTIVATED,
-/* private: internal use only */
- __NFC_CMD_AFTER_LAST
-};
-#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1)
-
-/**
- * enum nfc_attrs - supported nfc attributes
- *
- * @NFC_ATTR_UNSPEC: unspecified attribute
- *
- * @NFC_ATTR_DEVICE_INDEX: index of nfc device
- * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars
- * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from
- * NFC_PROTO_*_MASK constants
- * @NFC_ATTR_TARGET_INDEX: index of the nfc target
- * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID
- * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
- * target is not NFC-Forum compliant)
- * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
- * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
- * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
- * @NFC_ATTR_COMM_MODE: Passive or active mode
- * @NFC_ATTR_RF_MODE: Initiator or target
- * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for
- * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for
- */
-enum nfc_attrs {
- NFC_ATTR_UNSPEC,
- NFC_ATTR_DEVICE_INDEX,
- NFC_ATTR_DEVICE_NAME,
- NFC_ATTR_PROTOCOLS,
- NFC_ATTR_TARGET_INDEX,
- NFC_ATTR_TARGET_SENS_RES,
- NFC_ATTR_TARGET_SEL_RES,
- NFC_ATTR_TARGET_NFCID1,
- NFC_ATTR_TARGET_SENSB_RES,
- NFC_ATTR_TARGET_SENSF_RES,
- NFC_ATTR_COMM_MODE,
- NFC_ATTR_RF_MODE,
- NFC_ATTR_DEVICE_POWERED,
- NFC_ATTR_IM_PROTOCOLS,
- NFC_ATTR_TM_PROTOCOLS,
-/* private: internal use only */
- __NFC_ATTR_AFTER_LAST
-};
-#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
-
-#define NFC_DEVICE_NAME_MAXSIZE 8
-#define NFC_NFCID1_MAXSIZE 10
-#define NFC_SENSB_RES_MAXSIZE 12
-#define NFC_SENSF_RES_MAXSIZE 18
-#define NFC_GB_MAXSIZE 48
-
-/* NFC protocols */
-#define NFC_PROTO_JEWEL 1
-#define NFC_PROTO_MIFARE 2
-#define NFC_PROTO_FELICA 3
-#define NFC_PROTO_ISO14443 4
-#define NFC_PROTO_NFC_DEP 5
-#define NFC_PROTO_ISO14443_B 6
-
-#define NFC_PROTO_MAX 7
-
-/* NFC communication modes */
-#define NFC_COMM_ACTIVE 0
-#define NFC_COMM_PASSIVE 1
-
-/* NFC RF modes */
-#define NFC_RF_INITIATOR 0
-#define NFC_RF_TARGET 1
-#define NFC_RF_NONE 2
-
-/* NFC protocols masks used in bitsets */
-#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL)
-#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE)
-#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA)
-#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443)
-#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP)
-#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
-
-struct sockaddr_nfc {
- sa_family_t sa_family;
- __u32 dev_idx;
- __u32 target_idx;
- __u32 nfc_protocol;
-};
-
-#define NFC_LLCP_MAX_SERVICE_NAME 63
-struct sockaddr_nfc_llcp {
- sa_family_t sa_family;
- __u32 dev_idx;
- __u32 target_idx;
- __u32 nfc_protocol;
- __u8 dsap; /* Destination SAP, if known */
- __u8 ssap; /* Source SAP to be bound to */
- char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
- size_t service_name_len;
-};
-
-/* NFC socket protocols */
-#define NFC_SOCKPROTO_RAW 0
-#define NFC_SOCKPROTO_LLCP 1
-#define NFC_SOCKPROTO_MAX 2
-
-#define NFC_HEADER_SIZE 1
-
-/**
- * Pseudo-header info for raw socket packets
- * First byte is the adapter index
- * Second byte contains flags
- * - 0x01 - Direction (0=RX, 1=TX)
- * - 0x02-0x80 - Reserved
- **/
-#define NFC_LLCP_RAW_HEADER_SIZE 2
-#define NFC_LLCP_DIRECTION_RX 0x00
-#define NFC_LLCP_DIRECTION_TX 0x01
-
-#endif /*__LINUX_NFC_H */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 6d1fb63..3e794c1 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -7,130 +7,9 @@
#ifndef _LINUX_NFS_H
#define _LINUX_NFS_H
-#define NFS_PROGRAM 100003
-#define NFS_PORT 2049
-#define NFS_MAXDATA 8192
-#define NFS_MAXPATHLEN 1024
-#define NFS_MAXNAMLEN 255
-#define NFS_MAXGROUPS 16
-#define NFS_FHSIZE 32
-#define NFS_COOKIESIZE 4
-#define NFS_FIFO_DEV (-1)
-#define NFSMODE_FMT 0170000
-#define NFSMODE_DIR 0040000
-#define NFSMODE_CHR 0020000
-#define NFSMODE_BLK 0060000
-#define NFSMODE_REG 0100000
-#define NFSMODE_LNK 0120000
-#define NFSMODE_SOCK 0140000
-#define NFSMODE_FIFO 0010000
-
-#define NFS_MNT_PROGRAM 100005
-#define NFS_MNT_VERSION 1
-#define NFS_MNT3_VERSION 3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
- NFS_OK = 0, /* v2 v3 v4 */
- NFSERR_PERM = 1, /* v2 v3 v4 */
- NFSERR_NOENT = 2, /* v2 v3 v4 */
- NFSERR_IO = 5, /* v2 v3 v4 */
- NFSERR_NXIO = 6, /* v2 v3 v4 */
- NFSERR_EAGAIN = 11, /* v2 v3 */
- NFSERR_ACCES = 13, /* v2 v3 v4 */
- NFSERR_EXIST = 17, /* v2 v3 v4 */
- NFSERR_XDEV = 18, /* v3 v4 */
- NFSERR_NODEV = 19, /* v2 v3 v4 */
- NFSERR_NOTDIR = 20, /* v2 v3 v4 */
- NFSERR_ISDIR = 21, /* v2 v3 v4 */
- NFSERR_INVAL = 22, /* v2 v3 v4 */
- NFSERR_FBIG = 27, /* v2 v3 v4 */
- NFSERR_NOSPC = 28, /* v2 v3 v4 */
- NFSERR_ROFS = 30, /* v2 v3 v4 */
- NFSERR_MLINK = 31, /* v3 v4 */
- NFSERR_OPNOTSUPP = 45, /* v2 v3 */
- NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */
- NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */
- NFSERR_DQUOT = 69, /* v2 v3 v4 */
- NFSERR_STALE = 70, /* v2 v3 v4 */
- NFSERR_REMOTE = 71, /* v2 v3 */
- NFSERR_WFLUSH = 99, /* v2 */
- NFSERR_BADHANDLE = 10001, /* v3 v4 */
- NFSERR_NOT_SYNC = 10002, /* v3 */
- NFSERR_BAD_COOKIE = 10003, /* v3 v4 */
- NFSERR_NOTSUPP = 10004, /* v3 v4 */
- NFSERR_TOOSMALL = 10005, /* v3 v4 */
- NFSERR_SERVERFAULT = 10006, /* v3 v4 */
- NFSERR_BADTYPE = 10007, /* v3 v4 */
- NFSERR_JUKEBOX = 10008, /* v3 v4 */
- NFSERR_SAME = 10009, /* v4 */
- NFSERR_DENIED = 10010, /* v4 */
- NFSERR_EXPIRED = 10011, /* v4 */
- NFSERR_LOCKED = 10012, /* v4 */
- NFSERR_GRACE = 10013, /* v4 */
- NFSERR_FHEXPIRED = 10014, /* v4 */
- NFSERR_SHARE_DENIED = 10015, /* v4 */
- NFSERR_WRONGSEC = 10016, /* v4 */
- NFSERR_CLID_INUSE = 10017, /* v4 */
- NFSERR_RESOURCE = 10018, /* v4 */
- NFSERR_MOVED = 10019, /* v4 */
- NFSERR_NOFILEHANDLE = 10020, /* v4 */
- NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */
- NFSERR_STALE_CLIENTID = 10022, /* v4 */
- NFSERR_STALE_STATEID = 10023, /* v4 */
- NFSERR_OLD_STATEID = 10024, /* v4 */
- NFSERR_BAD_STATEID = 10025, /* v4 */
- NFSERR_BAD_SEQID = 10026, /* v4 */
- NFSERR_NOT_SAME = 10027, /* v4 */
- NFSERR_LOCK_RANGE = 10028, /* v4 */
- NFSERR_SYMLINK = 10029, /* v4 */
- NFSERR_RESTOREFH = 10030, /* v4 */
- NFSERR_LEASE_MOVED = 10031, /* v4 */
- NFSERR_ATTRNOTSUPP = 10032, /* v4 */
- NFSERR_NO_GRACE = 10033, /* v4 */
- NFSERR_RECLAIM_BAD = 10034, /* v4 */
- NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */
- NFSERR_BAD_XDR = 10036, /* v4 */
- NFSERR_LOCKS_HELD = 10037, /* v4 */
- NFSERR_OPENMODE = 10038, /* v4 */
- NFSERR_BADOWNER = 10039, /* v4 */
- NFSERR_BADCHAR = 10040, /* v4 */
- NFSERR_BADNAME = 10041, /* v4 */
- NFSERR_BAD_RANGE = 10042, /* v4 */
- NFSERR_LOCK_NOTSUPP = 10043, /* v4 */
- NFSERR_OP_ILLEGAL = 10044, /* v4 */
- NFSERR_DEADLOCK = 10045, /* v4 */
- NFSERR_FILE_OPEN = 10046, /* v4 */
- NFSERR_ADMIN_REVOKED = 10047, /* v4 */
- NFSERR_CB_PATH_DOWN = 10048, /* v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
- NFNON = 0,
- NFREG = 1,
- NFDIR = 2,
- NFBLK = 3,
- NFCHR = 4,
- NFLNK = 5,
- NFSOCK = 6,
- NFBAD = 7,
- NFFIFO = 8
-};
-
-#ifdef __KERNEL__
#include <linux/sunrpc/msg_prot.h>
#include <linux/string.h>
+#include <uapi/linux/nfs.h>
/*
* This is the kernel NFS client file handle representation
@@ -169,5 +48,4 @@ enum nfs3_stable_how {
NFS_DATA_SYNC = 1,
NFS_FILE_SYNC = 2
};
-#endif /* __KERNEL__ */
#endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h
deleted file mode 100644
index fde24b3..0000000
--- a/include/linux/nfs2.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * NFS protocol definitions
- *
- * This file contains constants for Version 2 of the protocol.
- */
-#ifndef _LINUX_NFS2_H
-#define _LINUX_NFS2_H
-
-#define NFS2_PORT 2049
-#define NFS2_MAXDATA 8192
-#define NFS2_MAXPATHLEN 1024
-#define NFS2_MAXNAMLEN 255
-#define NFS2_MAXGROUPS 16
-#define NFS2_FHSIZE 32
-#define NFS2_COOKIESIZE 4
-#define NFS2_FIFO_DEV (-1)
-#define NFS2MODE_FMT 0170000
-#define NFS2MODE_DIR 0040000
-#define NFS2MODE_CHR 0020000
-#define NFS2MODE_BLK 0060000
-#define NFS2MODE_REG 0100000
-#define NFS2MODE_LNK 0120000
-#define NFS2MODE_SOCK 0140000
-#define NFS2MODE_FIFO 0010000
-
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-enum nfs2_ftype {
- NF2NON = 0,
- NF2REG = 1,
- NF2DIR = 2,
- NF2BLK = 3,
- NF2CHR = 4,
- NF2LNK = 5,
- NF2SOCK = 6,
- NF2BAD = 7,
- NF2FIFO = 8
-};
-
-struct nfs2_fh {
- char data[NFS2_FHSIZE];
-};
-
-/*
- * Procedure numbers for NFSv2
- */
-#define NFS2_VERSION 2
-#define NFSPROC_NULL 0
-#define NFSPROC_GETATTR 1
-#define NFSPROC_SETATTR 2
-#define NFSPROC_ROOT 3
-#define NFSPROC_LOOKUP 4
-#define NFSPROC_READLINK 5
-#define NFSPROC_READ 6
-#define NFSPROC_WRITECACHE 7
-#define NFSPROC_WRITE 8
-#define NFSPROC_CREATE 9
-#define NFSPROC_REMOVE 10
-#define NFSPROC_RENAME 11
-#define NFSPROC_LINK 12
-#define NFSPROC_SYMLINK 13
-#define NFSPROC_MKDIR 14
-#define NFSPROC_RMDIR 15
-#define NFSPROC_READDIR 16
-#define NFSPROC_STATFS 17
-
-#endif /* _LINUX_NFS2_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 6ccfe3b..a778ad8 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -4,100 +4,10 @@
#ifndef _LINUX_NFS3_H
#define _LINUX_NFS3_H
-#define NFS3_PORT 2049
-#define NFS3_MAXDATA 32768
-#define NFS3_MAXPATHLEN PATH_MAX
-#define NFS3_MAXNAMLEN NAME_MAX
-#define NFS3_MAXGROUPS 16
-#define NFS3_FHSIZE 64
-#define NFS3_COOKIESIZE 4
-#define NFS3_CREATEVERFSIZE 8
-#define NFS3_COOKIEVERFSIZE 8
-#define NFS3_WRITEVERFSIZE 8
-#define NFS3_FIFO_DEV (-1)
-#define NFS3MODE_FMT 0170000
-#define NFS3MODE_DIR 0040000
-#define NFS3MODE_CHR 0020000
-#define NFS3MODE_BLK 0060000
-#define NFS3MODE_REG 0100000
-#define NFS3MODE_LNK 0120000
-#define NFS3MODE_SOCK 0140000
-#define NFS3MODE_FIFO 0010000
+#include <uapi/linux/nfs3.h>
-/* Flags for access() call */
-#define NFS3_ACCESS_READ 0x0001
-#define NFS3_ACCESS_LOOKUP 0x0002
-#define NFS3_ACCESS_MODIFY 0x0004
-#define NFS3_ACCESS_EXTEND 0x0008
-#define NFS3_ACCESS_DELETE 0x0010
-#define NFS3_ACCESS_EXECUTE 0x0020
-#define NFS3_ACCESS_FULL 0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
- NFS3_CREATE_UNCHECKED = 0,
- NFS3_CREATE_GUARDED = 1,
- NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK 0x0001
-#define NFS3_FSF_SYMLINK 0x0002
-#define NFS3_FSF_HOMOGENEOUS 0x0008
-#define NFS3_FSF_CANSETTIME 0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT 0x001B
-#define NFS3_FSF_BILLYBOY 0x0018
-#define NFS3_FSF_READONLY 0x0008
-
-enum nfs3_ftype {
- NF3NON = 0,
- NF3REG = 1,
- NF3DIR = 2,
- NF3BLK = 3,
- NF3CHR = 4,
- NF3LNK = 5,
- NF3SOCK = 6,
- NF3FIFO = 7, /* changed from NFSv2 (was 8) */
- NF3BAD = 8
-};
-
-struct nfs3_fh {
- unsigned short size;
- unsigned char data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION 3
-#define NFS3PROC_NULL 0
-#define NFS3PROC_GETATTR 1
-#define NFS3PROC_SETATTR 2
-#define NFS3PROC_LOOKUP 3
-#define NFS3PROC_ACCESS 4
-#define NFS3PROC_READLINK 5
-#define NFS3PROC_READ 6
-#define NFS3PROC_WRITE 7
-#define NFS3PROC_CREATE 8
-#define NFS3PROC_MKDIR 9
-#define NFS3PROC_SYMLINK 10
-#define NFS3PROC_MKNOD 11
-#define NFS3PROC_REMOVE 12
-#define NFS3PROC_RMDIR 13
-#define NFS3PROC_RENAME 14
-#define NFS3PROC_LINK 15
-#define NFS3PROC_READDIR 16
-#define NFS3PROC_READDIRPLUS 17
-#define NFS3PROC_FSSTAT 18
-#define NFS3PROC_FSINFO 19
-#define NFS3PROC_PATHCONF 20
-#define NFS3PROC_COMMIT 21
-
-#define NFS_MNT3_VERSION 3
-
-
-#if defined(__KERNEL__)
/* Number of 32bit words in post_op_attr */
#define NFS3_POST_OP_ATTR_WORDS 22
-#endif /* __KERNEL__ */
#endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index af2d2fa..e111fa4 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -9,168 +9,11 @@
* Kendrick Smith <kmsmith@umich.edu>
* Andy Adamson <andros@umich.edu>
*/
-
#ifndef _LINUX_NFS4_H
#define _LINUX_NFS4_H
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE 2
-#define NFS4_VERIFIER_SIZE 8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE 128
-#define NFS4_MAXPATHLEN PATH_MAX
-#define NFS4_MAXNAMLEN NAME_MAX
-#define NFS4_OPAQUE_LIMIT 1024
-#define NFS4_MAX_SESSIONID_LEN 16
-
-#define NFS4_ACCESS_READ 0x0001
-#define NFS4_ACCESS_LOOKUP 0x0002
-#define NFS4_ACCESS_MODIFY 0x0004
-#define NFS4_ACCESS_EXTEND 0x0008
-#define NFS4_ACCESS_DELETE 0x0010
-#define NFS4_ACCESS_EXECUTE 0x0020
-
-#define NFS4_FH_PERSISTENT 0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001
-#define NFS4_FH_VOLATILE_ANY 0x0002
-#define NFS4_FH_VOL_MIGRATION 0x0004
-#define NFS4_FH_VOL_RENAME 0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK 0x000F
-#define NFS4_SHARE_ACCESS_READ 0x0001
-#define NFS4_SHARE_ACCESS_WRITE 0x0002
-#define NFS4_SHARE_ACCESS_BOTH 0x0003
-#define NFS4_SHARE_DENY_READ 0x0001
-#define NFS4_SHARE_DENY_WRITE 0x0002
-#define NFS4_SHARE_DENY_BOTH 0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK 0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000
-#define NFS4_SHARE_WANT_READ_DELEG 0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG 0x0300
-#define NFS4_SHARE_WANT_NO_DELEG 0x0400
-#define NFS4_SHARE_WANT_CANCEL 0x0500
-
-#define NFS4_SHARE_WHEN_MASK 0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000
-
-#define NFS4_CDFC4_FORE 0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_CDFS4_FORE 0x1
-#define NFS4_CDFS4_BACK 0x2
-#define NFS4_CDFS4_BOTH 0x3
-
-#define NFS4_SET_TO_SERVER_TIME 0
-#define NFS4_SET_TO_CLIENT_TIME 1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL 0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040
-
-#define NFS4_ACE_READ_DATA 0x00000001
-#define NFS4_ACE_LIST_DIRECTORY 0x00000001
-#define NFS4_ACE_WRITE_DATA 0x00000002
-#define NFS4_ACE_ADD_FILE 0x00000002
-#define NFS4_ACE_APPEND_DATA 0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010
-#define NFS4_ACE_EXECUTE 0x00000020
-#define NFS4_ACE_DELETE_CHILD 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES 0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100
-#define NFS4_ACE_DELETE 0x00010000
-#define NFS4_ACE_READ_ACL 0x00020000
-#define NFS4_ACE_WRITE_ACL 0x00040000
-#define NFS4_ACE_WRITE_OWNER 0x00080000
-#define NFS4_ACE_SYNCHRONIZE 0x00100000
-#define NFS4_ACE_GENERIC_READ 0x00120081
-#define NFS4_ACE_GENERIC_WRITE 0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0
-#define NFS4_ACE_MASK_ALL 0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS 0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A 0x40070103
-#define EXCHGID4_FLAG_MASK_R 0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040
-#define SEQ4_STATUS_LEASE_MOVED 0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH 0
-#define NFS4_SECINFO_STYLE4_PARENT 1
-
-#define NFS4_MAX_UINT64 (~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS 8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
- NFS4_ACL_WHO_NAMED = 0,
- NFS4_ACL_WHO_OWNER,
- NFS4_ACL_WHO_GROUP,
- NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/nfs4.h>
struct nfs4_ace {
uint32_t type;
@@ -673,10 +516,3 @@ struct nfs4_deviceid {
};
#endif
-#endif
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/nfs4_mount.h b/include/linux/nfs4_mount.h
deleted file mode 100644
index a0dcf66..0000000
--- a/include/linux/nfs4_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _LINUX_NFS4_MOUNT_H
-#define _LINUX_NFS4_MOUNT_H
-
-/*
- * linux/include/linux/nfs4_mount.h
- *
- * Copyright (C) 2002 Trond Myklebust
- *
- * structure passed from user-space to kernel-space during an nfsv4 mount
- */
-
-/*
- * WARNING! Do not delete or change the order of these fields. If
- * a new field is required then add it to the end. The version field
- * tracks which fields are present. This will ensure some measure of
- * mount-to-kernel version compatibility. Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS4_MOUNT_VERSION 1
-
-struct nfs_string {
- unsigned int len;
- const char __user * data;
-};
-
-struct nfs4_mount_data {
- int version; /* 1 */
- int flags; /* 1 */
- int rsize; /* 1 */
- int wsize; /* 1 */
- int timeo; /* 1 */
- int retrans; /* 1 */
- int acregmin; /* 1 */
- int acregmax; /* 1 */
- int acdirmin; /* 1 */
- int acdirmax; /* 1 */
-
- /* see the definition of 'struct clientaddr4' in RFC3010 */
- struct nfs_string client_addr; /* 1 */
-
- /* Mount path */
- struct nfs_string mnt_path; /* 1 */
-
- /* Server details */
- struct nfs_string hostname; /* 1 */
- /* Server IP address */
- unsigned int host_addrlen; /* 1 */
- struct sockaddr __user * host_addr; /* 1 */
-
- /* Transport protocol to use */
- int proto; /* 1 */
-
- /* Pseudo-flavours to use for authentication. See RFC2623 */
- int auth_flavourlen; /* 1 */
- int __user *auth_flavours; /* 1 */
-};
-
-/* bits in the flags field */
-/* Note: the fields that correspond to existing NFSv2/v3 mount options
- * should mirror the values from include/linux/nfs_mount.h
- */
-
-#define NFS4_MOUNT_SOFT 0x0001 /* 1 */
-#define NFS4_MOUNT_INTR 0x0002 /* 1 */
-#define NFS4_MOUNT_NOCTO 0x0010 /* 1 */
-#define NFS4_MOUNT_NOAC 0x0020 /* 1 */
-#define NFS4_MOUNT_STRICTLOCK 0x1000 /* 1 */
-#define NFS4_MOUNT_UNSHARED 0x8000 /* 1 */
-#define NFS4_MOUNT_FLAGMASK 0x9033
-
-#endif
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 334a2f5..1cc2568 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -5,38 +5,11 @@
*
* OS-specific nfs filesystem definitions and declarations
*/
-
#ifndef _LINUX_NFS_FS_H
#define _LINUX_NFS_FS_H
-#include <linux/magic.h>
-
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO (11)
-#define NFS_DEF_UDP_RETRANS (3)
-#define NFS_DEF_TCP_TIMEO (600)
-#define NFS_DEF_TCP_RETRANS (2)
-
-#define NFS_MAX_UDP_TIMEOUT (60*HZ)
-#define NFS_MAX_TCP_TIMEOUT (600*HZ)
+#include <uapi/linux/nfs_fs.h>
-#define NFS_DEF_ACREGMIN (3)
-#define NFS_DEF_ACREGMAX (60)
-#define NFS_DEF_ACDIRMIN (30)
-#define NFS_DEF_ACDIRMAX (60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC 1 /* file being synced, or contention */
-#define FLUSH_STABLE 4 /* commit to stable storage */
-#define FLUSH_LOWPRI 8 /* low priority background flush */
-#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable
- * if everything fits in one RPC */
-
-#ifdef __KERNEL__
/*
* Enable dprintk() debugging support for nfs client.
@@ -613,29 +586,6 @@ nfs_fileid_to_ino_t(u64 fileid)
#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS 0x0001
-#define NFSDBG_DIRCACHE 0x0002
-#define NFSDBG_LOOKUPCACHE 0x0004
-#define NFSDBG_PAGECACHE 0x0008
-#define NFSDBG_PROC 0x0010
-#define NFSDBG_XDR 0x0020
-#define NFSDBG_FILE 0x0040
-#define NFSDBG_ROOT 0x0080
-#define NFSDBG_CALLBACK 0x0100
-#define NFSDBG_CLIENT 0x0200
-#define NFSDBG_MOUNT 0x0400
-#define NFSDBG_FSCACHE 0x0800
-#define NFSDBG_PNFS 0x1000
-#define NFSDBG_PNFS_LD 0x2000
-#define NFSDBG_STATE 0x4000
-#define NFSDBG_ALL 0xFFFF
-
-#ifdef __KERNEL__
# undef ifdebug
# ifdef NFS_DEBUG
@@ -645,6 +595,4 @@ nfs_fileid_to_ino_t(u64 fileid)
# define ifdebug(fac) if (0)
# define NFS_IFDEBUG(x)
# endif
-#endif /* __KERNEL */
-
#endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index ece91c5..2dcef3a 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -33,35 +33,11 @@
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
#ifndef NFS_IDMAP_H
#define NFS_IDMAP_H
-#include <linux/types.h>
-
-/* XXX from bits/utmp.h */
-#define IDMAP_NAMESZ 128
-
-#define IDMAP_TYPE_USER 0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
+#include <uapi/linux/nfs_idmap.h>
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN 0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS 0x08
-
-struct idmap_msg {
- __u8 im_type;
- __u8 im_conv;
- char im_name[IDMAP_NAMESZ];
- __u32 im_id;
- __u8 im_status;
-};
-
-#ifdef __KERNEL__
/* Forward declaration to make this header independent of others */
struct nfs_client;
@@ -97,6 +73,4 @@ int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t);
int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
#endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h
deleted file mode 100644
index 576bddd..0000000
--- a/include/linux/nfs_mount.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- * linux/include/linux/nfs_mount.h
- *
- * Copyright (C) 1992 Rick Sladkey
- *
- * structure passed from user-space to kernel-space during an nfs mount
- */
-#include <linux/in.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-
-/*
- * WARNING! Do not delete or change the order of these fields. If
- * a new field is required then add it to the end. The version field
- * tracks which fields are present. This will ensure some measure of
- * mount-to-kernel version compatibility. Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION 6
-#define NFS_MAX_CONTEXT_LEN 256
-
-struct nfs_mount_data {
- int version; /* 1 */
- int fd; /* 1 */
- struct nfs2_fh old_root; /* 1 */
- int flags; /* 1 */
- int rsize; /* 1 */
- int wsize; /* 1 */
- int timeo; /* 1 */
- int retrans; /* 1 */
- int acregmin; /* 1 */
- int acregmax; /* 1 */
- int acdirmin; /* 1 */
- int acdirmax; /* 1 */
- struct sockaddr_in addr; /* 1 */
- char hostname[NFS_MAXNAMLEN + 1]; /* 1 */
- int namlen; /* 2 */
- unsigned int bsize; /* 3 */
- struct nfs3_fh root; /* 4 */
- int pseudoflavor; /* 5 */
- char context[NFS_MAX_CONTEXT_LEN + 1]; /* 6 */
-};
-
-/* bits in the flags field visible to user space */
-
-#define NFS_MOUNT_SOFT 0x0001 /* 1 */
-#define NFS_MOUNT_INTR 0x0002 /* 1 */ /* now unused, but ABI */
-#define NFS_MOUNT_SECURE 0x0004 /* 1 */
-#define NFS_MOUNT_POSIX 0x0008 /* 1 */
-#define NFS_MOUNT_NOCTO 0x0010 /* 1 */
-#define NFS_MOUNT_NOAC 0x0020 /* 1 */
-#define NFS_MOUNT_TCP 0x0040 /* 2 */
-#define NFS_MOUNT_VER3 0x0080 /* 3 */
-#define NFS_MOUNT_KERBEROS 0x0100 /* 3 */
-#define NFS_MOUNT_NONLM 0x0200 /* 3 */
-#define NFS_MOUNT_BROKEN_SUID 0x0400 /* 4 */
-#define NFS_MOUNT_NOACL 0x0800 /* 4 */
-#define NFS_MOUNT_STRICTLOCK 0x1000 /* reserved for NFSv4 */
-#define NFS_MOUNT_SECFLAVOUR 0x2000 /* 5 */
-#define NFS_MOUNT_NORDIRPLUS 0x4000 /* 5 */
-#define NFS_MOUNT_UNSHARED 0x8000 /* 5 */
-#define NFS_MOUNT_FLAGMASK 0xFFFF
-
-/* The following are for internal use only */
-#define NFS_MOUNT_LOOKUP_CACHE_NONEG 0x10000
-#define NFS_MOUNT_LOOKUP_CACHE_NONE 0x20000
-#define NFS_MOUNT_NORESVPORT 0x40000
-#define NFS_MOUNT_LEGACY_INTERFACE 0x80000
-
-#define NFS_MOUNT_LOCAL_FLOCK 0x100000
-#define NFS_MOUNT_LOCAL_FCNTL 0x200000
-
-#endif
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index fabcb1e..5e69e67 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -6,30 +6,10 @@
#ifndef __LINUX_NFSACL_H
#define __LINUX_NFSACL_H
-#define NFS_ACL_PROGRAM 100227
-
-#define ACLPROC2_GETACL 1
-#define ACLPROC2_SETACL 2
-#define ACLPROC2_GETATTR 3
-#define ACLPROC2_ACCESS 4
-
-#define ACLPROC3_GETACL 1
-#define ACLPROC3_SETACL 2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL 0x0001
-#define NFS_ACLCNT 0x0002
-#define NFS_DFACL 0x0004
-#define NFS_DFACLCNT 0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT 0x1000
-
-#ifdef __KERNEL__
#include <linux/posix_acl.h>
#include <linux/sunrpc/xdr.h>
+#include <uapi/linux/nfsacl.h>
/* Maximum number of ACL entries over NFS */
#define NFS_ACL_MAX_ENTRIES 1024
@@ -58,5 +38,4 @@ extern int
nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
struct posix_acl **pacl);
-#endif /* __KERNEL__ */
#endif /* __LINUX_NFSACL_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
deleted file mode 100644
index 7df9b500..0000000
--- a/include/linux/nl80211.h
+++ /dev/null
@@ -1,3072 +0,0 @@
-#ifndef __LINUX_NL80211_H
-#define __LINUX_NL80211_H
-/*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/types.h>
-
-/**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * TODO: need more info?
- */
-
-/**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- * these registrations are ignored until the interface type is
- * changed again. This means that changing the interface type can
- * lead to a situation that couldn't otherwise be produced, but
- * any such registrations will be dormant in the sense that they
- * will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
-
-/**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
-
-/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- * to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- * instead, the support here is for backward compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- * %NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- * on an %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- * be sent from userspace to request creation of a new virtual interface,
- * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- * %NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- * userspace to request deletion of a virtual interface, then requires
- * attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- * and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- * or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- * attributes. For drivers that generate the beacon and probe responses
- * internally, the following attributes must be provided: %NL80211_ATTR_IE,
- * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
- * The channel to use can be set on the interface or be given using the
- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- * the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all stations, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
- * %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- * %NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- * the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all mesh paths, on the interface identified
- * by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- * %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * regulatory domain.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- * after being queried by the kernel. CRDA replies by sending a regulatory
- * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- * current alpha2 if it found a match. It also provides
- * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * regulatory rule is a nested set of attributes given by
- * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- * interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- * interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- * interface is identified with %NL80211_ATTR_IFINDEX and the management
- * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- * added to the end of the specified management frame is specified with
- * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
- * added to all specified management frames generated by
- * kernel/firmware/driver.
- * Note: This command has been removed and it is only reserved at this
- * point to avoid re-using existing command number. The functionality this
- * command was planned for has been provided with cleaner design with the
- * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * probe requests at CCK rate or not.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- * partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
- * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- * are passed, they are used in the probe requests. For
- * broadcast, a broadcast SSID must be passed (ie. an empty
- * string). If no SSID is passed, no probe requests are sent and
- * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
- * if passed, define which channels should be scanned; if not
- * passed, all channels allowed for the current regulatory domain
- * are used. Extra IEs can also be passed from the userspace by
- * using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
- * if scheduled scan is not running.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- * results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- * stopped. The driver may issue this event at any time during a
- * scheduled scan. One reason for stopping the scan is if the hardware
- * does not support starting an association or a normal scan while running
- * a scheduled scan. This event is also sent when the
- * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- * is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- * or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
- * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
- * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * has been changed and provides details of the request information
- * that caused the change such as who initiated the regulatory request
- * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * has been found while world roaming thus enabling active scan or
- * any mode of operation that initiates TX (beacons) on a channel
- * where we would not have been able to do either before. As an example
- * if you are world roaming (regulatory domain set to world or if your
- * driver is using a custom world roaming regulatory domain) and while
- * doing a passive scan on the 5 GHz band you find an AP there (if not
- * on a DFS channel) you will now be able to actively scan for that AP
- * or use AP mode on your card on that same channel. Note that this will
- * never be used for channels 1-11 on the 2 GHz band as they are always
- * enabled world wide. This beacon hint is only sent if your device had
- * either disabled active scanning or beaconing on a channel. We send to
- * userspace the wiphy on which we removed a restriction from
- * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- * This command is used both as a command (request to authenticate) and
- * as an event on the "mlme" multicast group indicating completion of the
- * authentication process.
- * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- * the SSID (mainly for association, but is included in authentication
- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- * is used to specify the authentication type. %NL80211_ATTR_IE is used to
- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- * to be added to the frame.
- * When used as an event, this reports reception of an Authentication
- * frame in station and IBSS modes when the local MLME processed the
- * frame, i.e., it was for the local STA and was received in correct
- * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- * MLME SAP interface (kernel providing MLME, userspace SME). The
- * included %NL80211_ATTR_FRAME attribute contains the management frame
- * (including both the header and frame body, but not FCS). This event is
- * also used to indicate if the authentication attempt timed out. In that
- * case the %NL80211_ATTR_FRAME attribute is replaced with a
- * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- * pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- * primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- * event includes %NL80211_ATTR_MAC to describe the source MAC address of
- * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- * event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- * FREQ attribute (for the initial frequency if no peer can be found)
- * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- * should be fixed rather than automatically determined. Can only be
- * executed on a network interface that is UP, and fixed BSSID/FREQ
- * may be rejected. Another optional parameter is the beacon interval,
- * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- * given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- * determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- * to identify the device, and the TESTDATA blob attribute to pass through
- * to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- * requests to connect to a specified network but without separating
- * auth and assoc steps. For this, you need to specify the SSID in a
- * %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
- * Background scan period can optionally be
- * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- * if not specified default background scan configuration
- * in driver is used and if period value is 0, bg scan will be disabled.
- * This attribute is ignored if driver does not support roam scan.
- * It is also sent as an event, with the BSSID and response IEs when the
- * connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- * sent as an event when the card/driver roamed by itself.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- * userspace that a connection was dropped by the AP or due to other
- * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- * %NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- * associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- * channel for the specified amount of time. This can be used to do
- * off-channel operations like transmit a Public Action frame and wait for
- * a response while being associated to an AP on another channel.
- * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
- * optionally used to specify additional channel parameters.
- * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- * to remain on the channel. This command is also used as an event to
- * notify when the requested duration starts (it may take a while for the
- * driver to schedule this time due to other concurrent needs for the
- * radio).
- * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- * that will be included with any events pertaining to this request;
- * the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- * pending remain-on-channel duration if the desired operation has been
- * completed prior to expiration of the originally requested duration.
- * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- * uniquely identify the request.
- * This command is also used as an event to notify when a requested
- * remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- * and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- * (via @NL80211_CMD_FRAME) for processing in userspace. This command
- * requires an interface index, a frame type attribute (optional for
- * backward compatibility reasons, if not given assumes action frames)
- * and a match attribute containing the first few bytes of the frame
- * that should match, e.g. a single byte for only a category match or
- * four bytes for vendor frames including the OUI. The registration
- * cannot be dropped, but is removed automatically when the netlink
- * socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- * backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- * command is used both as a request to transmit a management frame and
- * as an event indicating reception of a frame that was not processed in
- * kernel code, but is for us (i.e., which may need to be processed in a
- * user space application). %NL80211_ATTR_FRAME is used to specify the
- * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
- * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- * which channel the frame is to be transmitted or was received. If this
- * channel is not the current channel (remain-on-channel or the
- * operational channel) the device will switch to the given channel and
- * transmit the frame, optionally waiting for a response for the time
- * specified using %NL80211_ATTR_DURATION. When called, this operation
- * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- * TX status event pertaining to the TX request.
- * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- * management frames at CCK rate or not in 2GHz band.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- * command may be used with the corresponding cookie to cancel the wait
- * time if it is known that it is no longer necessary.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- * the TX command and %NL80211_ATTR_FRAME includes the contents of the
- * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- * the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- * backward compatibility.
- *
- * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
- * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
- *
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- * is used to configure connection quality monitoring notification trigger
- * levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- * command is used as an event to indicate the that a trigger level was
- * reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
- * by %NL80211_ATTR_IFINDEX) shall operate on.
- * In case multiple channels are supported by the device, the mechanism
- * with which it switches channels is implementation-defined.
- * When a monitor interface is given, it can only switch channel while
- * no other interfaces are operating to avoid disturbing the operation
- * of any other interfaces, and other interfaces will again take
- * precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- * mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- * network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- * notification. This event is used to indicate that an unprotected
- * deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- * notification. This event is used to indicate that an unprotected
- * disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- * beacon or probe response from a compatible mesh peer. This is only
- * sent while no station information (sta_info) exists for the new peer
- * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
- * reception of this notification, userspace may decide to create a new
- * station (@NL80211_CMD_NEW_STATION). To stop this notification from
- * reoccurring, the userspace authentication daemon may want to create the
- * new station with the AUTHENTICATED flag unset and maybe change it later
- * depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- * Since wireless is more complex than wired ethernet, it supports
- * various triggers. These triggers can be configured through this
- * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- * more background information, see
- * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- * the necessary information for supporting GTK rekey offload. This
- * feature is typically used during WoWLAN. The configuration data
- * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- * contains the data in sub-attributes). After rekeying happened,
- * this command may also be sent by the driver as an MLME event to
- * inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- * of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- * (or GO) interface (i.e. hostapd) to ask for unexpected frames to
- * implement sending deauth to stations that send unexpected class 3
- * frames. Also used as the event sent by the kernel when such a frame
- * is received.
- * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- * other attributes like the interface index are present.
- * If used as the command it must have an interface index and you can
- * only unsubscribe from the event by closing the socket. Subscription
- * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- * and wasn't already in a 4-addr VLAN. The event will be sent similarly
- * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- * by sending a null data frame to it and reporting when the frame is
- * acknowleged. This is used to allow timing out inactive clients. Uses
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- * direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- * up the event with the request. The event includes the same data and
- * has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- * other BSSes when any interfaces are in AP mode. This helps implement
- * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- * messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- * No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- * independently of the userspace SME, send this event indicating
- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- * its %NL80211_ATTR_WDEV identifier. It must have been created with
- * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
- * P2P Device can be used for P2P operations, e.g. remain-on-channel and
- * public action frame TX.
- * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
- * its %NL80211_ATTR_WDEV identifier.
- *
- * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
- * notify userspace that AP has rejected the connection request from a
- * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
- * is used for this.
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-enum nl80211_commands {
-/* don't change the order or add anything between, this is ABI! */
- NL80211_CMD_UNSPEC,
-
- NL80211_CMD_GET_WIPHY, /* can dump */
- NL80211_CMD_SET_WIPHY,
- NL80211_CMD_NEW_WIPHY,
- NL80211_CMD_DEL_WIPHY,
-
- NL80211_CMD_GET_INTERFACE, /* can dump */
- NL80211_CMD_SET_INTERFACE,
- NL80211_CMD_NEW_INTERFACE,
- NL80211_CMD_DEL_INTERFACE,
-
- NL80211_CMD_GET_KEY,
- NL80211_CMD_SET_KEY,
- NL80211_CMD_NEW_KEY,
- NL80211_CMD_DEL_KEY,
-
- NL80211_CMD_GET_BEACON,
- NL80211_CMD_SET_BEACON,
- NL80211_CMD_START_AP,
- NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
- NL80211_CMD_STOP_AP,
- NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
-
- NL80211_CMD_GET_STATION,
- NL80211_CMD_SET_STATION,
- NL80211_CMD_NEW_STATION,
- NL80211_CMD_DEL_STATION,
-
- NL80211_CMD_GET_MPATH,
- NL80211_CMD_SET_MPATH,
- NL80211_CMD_NEW_MPATH,
- NL80211_CMD_DEL_MPATH,
-
- NL80211_CMD_SET_BSS,
-
- NL80211_CMD_SET_REG,
- NL80211_CMD_REQ_SET_REG,
-
- NL80211_CMD_GET_MESH_CONFIG,
- NL80211_CMD_SET_MESH_CONFIG,
-
- NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
-
- NL80211_CMD_GET_REG,
-
- NL80211_CMD_GET_SCAN,
- NL80211_CMD_TRIGGER_SCAN,
- NL80211_CMD_NEW_SCAN_RESULTS,
- NL80211_CMD_SCAN_ABORTED,
-
- NL80211_CMD_REG_CHANGE,
-
- NL80211_CMD_AUTHENTICATE,
- NL80211_CMD_ASSOCIATE,
- NL80211_CMD_DEAUTHENTICATE,
- NL80211_CMD_DISASSOCIATE,
-
- NL80211_CMD_MICHAEL_MIC_FAILURE,
-
- NL80211_CMD_REG_BEACON_HINT,
-
- NL80211_CMD_JOIN_IBSS,
- NL80211_CMD_LEAVE_IBSS,
-
- NL80211_CMD_TESTMODE,
-
- NL80211_CMD_CONNECT,
- NL80211_CMD_ROAM,
- NL80211_CMD_DISCONNECT,
-
- NL80211_CMD_SET_WIPHY_NETNS,
-
- NL80211_CMD_GET_SURVEY,
- NL80211_CMD_NEW_SURVEY_RESULTS,
-
- NL80211_CMD_SET_PMKSA,
- NL80211_CMD_DEL_PMKSA,
- NL80211_CMD_FLUSH_PMKSA,
-
- NL80211_CMD_REMAIN_ON_CHANNEL,
- NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-
- NL80211_CMD_SET_TX_BITRATE_MASK,
-
- NL80211_CMD_REGISTER_FRAME,
- NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
- NL80211_CMD_FRAME,
- NL80211_CMD_ACTION = NL80211_CMD_FRAME,
- NL80211_CMD_FRAME_TX_STATUS,
- NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
-
- NL80211_CMD_SET_POWER_SAVE,
- NL80211_CMD_GET_POWER_SAVE,
-
- NL80211_CMD_SET_CQM,
- NL80211_CMD_NOTIFY_CQM,
-
- NL80211_CMD_SET_CHANNEL,
- NL80211_CMD_SET_WDS_PEER,
-
- NL80211_CMD_FRAME_WAIT_CANCEL,
-
- NL80211_CMD_JOIN_MESH,
- NL80211_CMD_LEAVE_MESH,
-
- NL80211_CMD_UNPROT_DEAUTHENTICATE,
- NL80211_CMD_UNPROT_DISASSOCIATE,
-
- NL80211_CMD_NEW_PEER_CANDIDATE,
-
- NL80211_CMD_GET_WOWLAN,
- NL80211_CMD_SET_WOWLAN,
-
- NL80211_CMD_START_SCHED_SCAN,
- NL80211_CMD_STOP_SCHED_SCAN,
- NL80211_CMD_SCHED_SCAN_RESULTS,
- NL80211_CMD_SCHED_SCAN_STOPPED,
-
- NL80211_CMD_SET_REKEY_OFFLOAD,
-
- NL80211_CMD_PMKSA_CANDIDATE,
-
- NL80211_CMD_TDLS_OPER,
- NL80211_CMD_TDLS_MGMT,
-
- NL80211_CMD_UNEXPECTED_FRAME,
-
- NL80211_CMD_PROBE_CLIENT,
-
- NL80211_CMD_REGISTER_BEACONS,
-
- NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
-
- NL80211_CMD_SET_NOACK_MAP,
-
- NL80211_CMD_CH_SWITCH_NOTIFY,
-
- NL80211_CMD_START_P2P_DEVICE,
- NL80211_CMD_STOP_P2P_DEVICE,
-
- NL80211_CMD_CONN_FAILED,
-
- /* add new commands above here */
-
- /* used to define NL80211_CMD_MAX below */
- __NL80211_CMD_AFTER_LAST,
- NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
-};
-
-/*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
-#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
-#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
-#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
-#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
-#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
-#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
-#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
-
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-/* source-level API compatibility */
-#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
-#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
-#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
-
-/**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- * /sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
- * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- * this attribute)
- * NL80211_CHAN_HT20 = HT20 only
- * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- * less than or equal to the RTS threshold; allowed range: 1..255;
- * dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- * greater than the RTS threshold; allowed range: 1..255;
- * dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- * length in octets for frames; allowed range: 256..8000, disable
- * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- * larger than or equal to this use RTS/CTS handshake); allowed range:
- * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- * section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
- * that don't have a netdev (u64)
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- * keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- * section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- * CCMP keys, each six bytes in little endian
- * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
- * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
- * default management key
- * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
- * other commands, indicates which pairwise cipher suites are used
- * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
- * other commands, indicates which group cipher suite is used
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- * IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- * rates as defined by IEEE 802.11 7.3.2.2 but without the length
- * restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- * to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- * given for %NL80211_CMD_GET_STATION, nested attribute containing
- * info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- * consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- * &enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- * &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * current regulatory domain should be set to or is already set to.
- * For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * to query the CRDA to retrieve one regulatory domain. This attribute can
- * also be used by userspace to query the kernel for the currently set
- * regulatory domain. We chose an alpha2 as that is also used by the
- * IEEE-802.11d country information element to identify a country.
- * Users can also simply ask the wireless core to set regulatory domain
- * to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- * rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- * (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- * (u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- * restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- * association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- * supported interface types, each a flag attribute with the number
- * of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- * %NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- * %NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- * a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- * scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- * that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- * elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- * scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- * an array of command numbers (i.e. a mapping index to command number)
- * that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- * NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- * represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- * %NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- * a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _before_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * due to considerations from a beacon hint. This attribute reflects
- * the state of the channel _after_ the beacon hint processing. This
- * attributes consists of a nested attribute containing
- * NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- * cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- * for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- * used for the association (&enum nl80211_mfp, represented as a u32);
- * this attribute can be used
- * with %NL80211_CMD_ASSOCIATE request
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- * &struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- * request, the driver will assume that the port is unauthorized until
- * authorized by user space. Otherwise, port is marked authorized by
- * default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- * ethertype that will be used for key negotiation. It can be
- * specified with the associate and connect commands. If it is not
- * specified, the value defaults to 0x888E (PAE, 802.1X). This
- * attribute is also used as a flag in the wiphy information to
- * indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- * ethertype frames used for key negotiation must not be encrypted.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- * We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- * event was due to the AP disconnecting the station, and not due to
- * a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- * event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- * that protected APs should be used. This is also used with NEW_BEACON to
- * indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- * to indicate which unicast key ciphers will be used with the connection
- * (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which group key cipher will be used with the connection (a
- * u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which WPA version(s) the AP we want to associate with is using
- * (a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- * indicate which key management algorithm(s) to use (an array of u32).
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- * sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- * sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- * commands to specify using a reassociate frame
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- * %NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- * and join_ibss(), key information is in a nested attribute each
- * with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- * dumps. This number increases whenever the object list being
- * dumped changes, and as such userspace can verify that it has
- * obtained a complete and consistent snapshot by verifying that
- * all dump messages contain the same generation number. If it
- * changed then the list changed and the dump should be repeated
- * completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- * containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- * cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- * specifies the maximum duration that can be requested with the
- * remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
- * enum nl80211_band value is used as the index (nla_type() of the nested
- * data. If a band is not included, it will be configured to allow all
- * rates based on negotiated supported rates information. This attribute
- * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- * @NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- * information about which frame types can be transmitted with
- * %NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- * information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- * acknowledged by the recipient.
- *
- * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- * is requesting a local authentication/association state change without
- * invoking actual management frame exchange. This can be used with
- * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- * NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- * connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- * &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- * for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- * means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- * This can be used to mask out antennas which are not attached or should
- * not be used for transmitting. If an antenna is not selected in this
- * bitmap the hardware is not allowed to transmit on this antenna.
- *
- * Each bit represents one antenna, starting with antenna 1 at the first
- * bit. Depending on which antennas are selected in the bitmap, 802.11n
- * drivers can derive which chainmasks to use (if all antennas belonging to
- * a particular chain are disabled this chain should be disabled) and if
- * a chain has diversity antennas wether diversity should be used or not.
- * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- * derived from the available chains after applying the antenna mask.
- * Non-802.11n drivers can derive wether to use diversity or not.
- * Drivers may reject configurations or RX/TX mask combinations they cannot
- * support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- * This can be used to mask out antennas which are not attached or should
- * not be used for receiving. If an antenna is not selected in this bitmap
- * the hardware should not be configured to receive on this antenna.
- * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- * for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- * for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- * transmitted on another channel when the channel given doesn't match
- * the current channel. If the current channel doesn't match and this
- * flag isn't set, the frame will be rejected. This is also used as an
- * nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- * attributes, specifying what a key should be set as default as.
- * See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
- * changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- * containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- * allows auth frames in a mesh to be passed to userspace for processing via
- * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
- * defined in &enum nl80211_plink_state. Used when userspace is
- * driving the peer link management state machine.
- * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- * capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- * indicate which WoW triggers should be enabled. This is also
- * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- * triggers.
- *
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- * cycles, in msecs.
- *
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- * sets of attributes to match during scheduled scans. Only BSSs
- * that match any of the sets will be reported. These are
- * pass-thru filter rules.
- * For a match to succeed, the BSS must match all attributes of a
- * set. Since not every hardware supports matching all types of
- * attributes, there is no guarantee that the reported BSSs are
- * fully complying with the match sets and userspace needs to be
- * able to ignore them by itself.
- * Thus, the implementation is somewhat hardware-dependent, but
- * this is only an optimization and the userspace application
- * needs to handle all the non-filtered results anyway.
- * If the match attributes don't make sense when combined with
- * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- * is included in the probe request, but the match attributes
- * will never let it go through), -EINVAL may be returned.
- * If ommited, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- * interface combinations. In each nested item, it contains attributes
- * defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- * are managed in software: interfaces of these types aren't subject to
- * any restrictions in their number or combinations.
- *
- * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- * nested array attribute containing an entry for each band, with the entry
- * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- * without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- * and Probe Response (when response to wildcard Probe Request); see
- * &enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- * driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- * Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- * (Re)Association Response frames when the driver (or firmware) replies to
- * (Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- * of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- * as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- * roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- * candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- * for management frames transmission. In order to avoid p2p probe/action
- * frames are being transmitted at CCK rate in 2GHz band, the user space
- * applications use this attribute.
- * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- * %NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- * request, link setup confirm, link teardown, etc.). Values are
- * described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- * TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- * &enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- * as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- * procedures should be performed by sending TDLS packets via
- * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- * used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- * that have AP support to indicate that they have the AP SME integrated
- * with support for the features listed in this attribute, see
- * &enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- * the driver to not wait for an acknowledgement. Note that due to this,
- * it will also not give a status callback nor return a cookie. This is
- * mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- * &enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- * requests while operating in AP-mode.
- * This attribute holds a bitmap of the supported protocols for
- * offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- * probe-response frame. The DA field in the 802.11 header is zero-ed out,
- * to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
- * this feature. Currently, only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- * ATTR_HT_CAPABILITY to which attention should be paid.
- * Currently, only mac80211 NICs support this feature.
- * The values that may be configured are:
- * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- * AMPDU density and AMPDU factor.
- * All values are treated as suggestions and may be ignored
- * by the driver as required. The actual values may be seen in
- * the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- * abides to when initiating radiation on DFS channels. A country maps
- * to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- * up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- * used by the drivers which has MLME in firmware and does not have support
- * to report per station tx/rx activity to free up the staion entry from
- * the list. This needs to be used when the driver advertises the
- * capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- * this attribute is (depending on the driver capabilities) added to
- * received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- * or 0 to disable background scan.
- *
- * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
- * userspace. If unset it is assumed the hint comes directly from
- * a user. If set code could specify exactly what type of source
- * was used to provide the hint. For the different types of
- * allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
- * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
- * the connection request from a station. nl80211_connect_failed_reason
- * enum has different reasons of connection failure.
- *
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_attrs {
-/* don't change the order or add anything between, this is ABI! */
- NL80211_ATTR_UNSPEC,
-
- NL80211_ATTR_WIPHY,
- NL80211_ATTR_WIPHY_NAME,
-
- NL80211_ATTR_IFINDEX,
- NL80211_ATTR_IFNAME,
- NL80211_ATTR_IFTYPE,
-
- NL80211_ATTR_MAC,
-
- NL80211_ATTR_KEY_DATA,
- NL80211_ATTR_KEY_IDX,
- NL80211_ATTR_KEY_CIPHER,
- NL80211_ATTR_KEY_SEQ,
- NL80211_ATTR_KEY_DEFAULT,
-
- NL80211_ATTR_BEACON_INTERVAL,
- NL80211_ATTR_DTIM_PERIOD,
- NL80211_ATTR_BEACON_HEAD,
- NL80211_ATTR_BEACON_TAIL,
-
- NL80211_ATTR_STA_AID,
- NL80211_ATTR_STA_FLAGS,
- NL80211_ATTR_STA_LISTEN_INTERVAL,
- NL80211_ATTR_STA_SUPPORTED_RATES,
- NL80211_ATTR_STA_VLAN,
- NL80211_ATTR_STA_INFO,
-
- NL80211_ATTR_WIPHY_BANDS,
-
- NL80211_ATTR_MNTR_FLAGS,
-
- NL80211_ATTR_MESH_ID,
- NL80211_ATTR_STA_PLINK_ACTION,
- NL80211_ATTR_MPATH_NEXT_HOP,
- NL80211_ATTR_MPATH_INFO,
-
- NL80211_ATTR_BSS_CTS_PROT,
- NL80211_ATTR_BSS_SHORT_PREAMBLE,
- NL80211_ATTR_BSS_SHORT_SLOT_TIME,
-
- NL80211_ATTR_HT_CAPABILITY,
-
- NL80211_ATTR_SUPPORTED_IFTYPES,
-
- NL80211_ATTR_REG_ALPHA2,
- NL80211_ATTR_REG_RULES,
-
- NL80211_ATTR_MESH_CONFIG,
-
- NL80211_ATTR_BSS_BASIC_RATES,
-
- NL80211_ATTR_WIPHY_TXQ_PARAMS,
- NL80211_ATTR_WIPHY_FREQ,
- NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-
- NL80211_ATTR_KEY_DEFAULT_MGMT,
-
- NL80211_ATTR_MGMT_SUBTYPE,
- NL80211_ATTR_IE,
-
- NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
-
- NL80211_ATTR_SCAN_FREQUENCIES,
- NL80211_ATTR_SCAN_SSIDS,
- NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
- NL80211_ATTR_BSS,
-
- NL80211_ATTR_REG_INITIATOR,
- NL80211_ATTR_REG_TYPE,
-
- NL80211_ATTR_SUPPORTED_COMMANDS,
-
- NL80211_ATTR_FRAME,
- NL80211_ATTR_SSID,
- NL80211_ATTR_AUTH_TYPE,
- NL80211_ATTR_REASON_CODE,
-
- NL80211_ATTR_KEY_TYPE,
-
- NL80211_ATTR_MAX_SCAN_IE_LEN,
- NL80211_ATTR_CIPHER_SUITES,
-
- NL80211_ATTR_FREQ_BEFORE,
- NL80211_ATTR_FREQ_AFTER,
-
- NL80211_ATTR_FREQ_FIXED,
-
-
- NL80211_ATTR_WIPHY_RETRY_SHORT,
- NL80211_ATTR_WIPHY_RETRY_LONG,
- NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- NL80211_ATTR_WIPHY_RTS_THRESHOLD,
-
- NL80211_ATTR_TIMED_OUT,
-
- NL80211_ATTR_USE_MFP,
-
- NL80211_ATTR_STA_FLAGS2,
-
- NL80211_ATTR_CONTROL_PORT,
-
- NL80211_ATTR_TESTDATA,
-
- NL80211_ATTR_PRIVACY,
-
- NL80211_ATTR_DISCONNECTED_BY_AP,
- NL80211_ATTR_STATUS_CODE,
-
- NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
- NL80211_ATTR_CIPHER_SUITE_GROUP,
- NL80211_ATTR_WPA_VERSIONS,
- NL80211_ATTR_AKM_SUITES,
-
- NL80211_ATTR_REQ_IE,
- NL80211_ATTR_RESP_IE,
-
- NL80211_ATTR_PREV_BSSID,
-
- NL80211_ATTR_KEY,
- NL80211_ATTR_KEYS,
-
- NL80211_ATTR_PID,
-
- NL80211_ATTR_4ADDR,
-
- NL80211_ATTR_SURVEY_INFO,
-
- NL80211_ATTR_PMKID,
- NL80211_ATTR_MAX_NUM_PMKIDS,
-
- NL80211_ATTR_DURATION,
-
- NL80211_ATTR_COOKIE,
-
- NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-
- NL80211_ATTR_TX_RATES,
-
- NL80211_ATTR_FRAME_MATCH,
-
- NL80211_ATTR_ACK,
-
- NL80211_ATTR_PS_STATE,
-
- NL80211_ATTR_CQM,
-
- NL80211_ATTR_LOCAL_STATE_CHANGE,
-
- NL80211_ATTR_AP_ISOLATE,
-
- NL80211_ATTR_WIPHY_TX_POWER_SETTING,
- NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
-
- NL80211_ATTR_TX_FRAME_TYPES,
- NL80211_ATTR_RX_FRAME_TYPES,
- NL80211_ATTR_FRAME_TYPE,
-
- NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
- NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-
- NL80211_ATTR_SUPPORT_IBSS_RSN,
-
- NL80211_ATTR_WIPHY_ANTENNA_TX,
- NL80211_ATTR_WIPHY_ANTENNA_RX,
-
- NL80211_ATTR_MCAST_RATE,
-
- NL80211_ATTR_OFFCHANNEL_TX_OK,
-
- NL80211_ATTR_BSS_HT_OPMODE,
-
- NL80211_ATTR_KEY_DEFAULT_TYPES,
-
- NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
-
- NL80211_ATTR_MESH_SETUP,
-
- NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
- NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
-
- NL80211_ATTR_SUPPORT_MESH_AUTH,
- NL80211_ATTR_STA_PLINK_STATE,
-
- NL80211_ATTR_WOWLAN_TRIGGERS,
- NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
-
- NL80211_ATTR_SCHED_SCAN_INTERVAL,
-
- NL80211_ATTR_INTERFACE_COMBINATIONS,
- NL80211_ATTR_SOFTWARE_IFTYPES,
-
- NL80211_ATTR_REKEY_DATA,
-
- NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
- NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
-
- NL80211_ATTR_SCAN_SUPP_RATES,
-
- NL80211_ATTR_HIDDEN_SSID,
-
- NL80211_ATTR_IE_PROBE_RESP,
- NL80211_ATTR_IE_ASSOC_RESP,
-
- NL80211_ATTR_STA_WME,
- NL80211_ATTR_SUPPORT_AP_UAPSD,
-
- NL80211_ATTR_ROAM_SUPPORT,
-
- NL80211_ATTR_SCHED_SCAN_MATCH,
- NL80211_ATTR_MAX_MATCH_SETS,
-
- NL80211_ATTR_PMKSA_CANDIDATE,
-
- NL80211_ATTR_TX_NO_CCK_RATE,
-
- NL80211_ATTR_TDLS_ACTION,
- NL80211_ATTR_TDLS_DIALOG_TOKEN,
- NL80211_ATTR_TDLS_OPERATION,
- NL80211_ATTR_TDLS_SUPPORT,
- NL80211_ATTR_TDLS_EXTERNAL_SETUP,
-
- NL80211_ATTR_DEVICE_AP_SME,
-
- NL80211_ATTR_DONT_WAIT_FOR_ACK,
-
- NL80211_ATTR_FEATURE_FLAGS,
-
- NL80211_ATTR_PROBE_RESP_OFFLOAD,
-
- NL80211_ATTR_PROBE_RESP,
-
- NL80211_ATTR_DFS_REGION,
-
- NL80211_ATTR_DISABLE_HT,
- NL80211_ATTR_HT_CAPABILITY_MASK,
-
- NL80211_ATTR_NOACK_MAP,
-
- NL80211_ATTR_INACTIVITY_TIMEOUT,
-
- NL80211_ATTR_RX_SIGNAL_DBM,
-
- NL80211_ATTR_BG_SCAN_PERIOD,
-
- NL80211_ATTR_WDEV,
-
- NL80211_ATTR_USER_REG_HINT_TYPE,
-
- NL80211_ATTR_CONN_FAILED_REASON,
-
- /* add attributes here, update the policy in nl80211.c */
-
- __NL80211_ATTR_AFTER_LAST,
- NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
-};
-
-/* source-level API compatibility */
-#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
-#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-
-/*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
-#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
-#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
-#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
-#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
-#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
-#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
-#define NL80211_ATTR_IE NL80211_ATTR_IE
-#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
-#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
-#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
-#define NL80211_ATTR_SSID NL80211_ATTR_SSID
-#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
-#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
-#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
-#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
-#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
-#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
-#define NL80211_ATTR_KEY NL80211_ATTR_KEY
-#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-#define NL80211_MAX_SUPP_RATES 32
-#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 32
-#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
-#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
-#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
-#define NL80211_HT_CAPABILITY_LEN 26
-
-#define NL80211_MAX_NR_CIPHER_SUITES 5
-#define NL80211_MAX_NR_AKM_SUITES 2
-
-#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10
-
-/* default RSSI threshold for scan results if none specified. */
-#define NL80211_SCAN_RSSI_THOLD_OFF -300
-
-#define NL80211_CQM_TXE_MAX_INTVL 1800
-
-/**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- * are a bit special in that they must always be tied to a pre-existing
- * AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
- * and therefore can't be created in the normal ways, use the
- * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- * commands to create and destroy one
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
-enum nl80211_iftype {
- NL80211_IFTYPE_UNSPECIFIED,
- NL80211_IFTYPE_ADHOC,
- NL80211_IFTYPE_STATION,
- NL80211_IFTYPE_AP,
- NL80211_IFTYPE_AP_VLAN,
- NL80211_IFTYPE_WDS,
- NL80211_IFTYPE_MONITOR,
- NL80211_IFTYPE_MESH_POINT,
- NL80211_IFTYPE_P2P_CLIENT,
- NL80211_IFTYPE_P2P_GO,
- NL80211_IFTYPE_P2P_DEVICE,
-
- /* keep last */
- NUM_NL80211_IFTYPES,
- NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
-};
-
-/**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- * with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- * only be used in managed mode (even in the flags mask). Note that the
- * flag can't be changed, it is only valid while adding a station, and
- * attempts to change it will silently be ignored (rather than rejected
- * as errors.)
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-enum nl80211_sta_flags {
- __NL80211_STA_FLAG_INVALID,
- NL80211_STA_FLAG_AUTHORIZED,
- NL80211_STA_FLAG_SHORT_PREAMBLE,
- NL80211_STA_FLAG_WME,
- NL80211_STA_FLAG_MFP,
- NL80211_STA_FLAG_AUTHENTICATED,
- NL80211_STA_FLAG_TDLS_PEER,
-
- /* keep last */
- __NL80211_STA_FLAG_AFTER_LAST,
- NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
-};
-
-#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER
-
-/**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
-struct nl80211_sta_flag_update {
- __u32 mask;
- __u32 set;
-} __attribute__((packed));
-
-/**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- * There are 2 attributes for bitrate, a legacy one that represents
- * a 16-bit value, and new one that represents a 32-bit value.
- * If the rate value fits into 16 bit, both attributes are reported
- * with the same value. If the rate is too high to fit into 16 bits
- * (>6.5535Gbps) only 32-bit attribute is included.
- * User space tools encouraged to use the 32-bit attribute and fall
- * back to the 16-bit one for compatibility with older kernels.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
-enum nl80211_rate_info {
- __NL80211_RATE_INFO_INVALID,
- NL80211_RATE_INFO_BITRATE,
- NL80211_RATE_INFO_MCS,
- NL80211_RATE_INFO_40_MHZ_WIDTH,
- NL80211_RATE_INFO_SHORT_GI,
- NL80211_RATE_INFO_BITRATE32,
-
- /* keep last */
- __NL80211_RATE_INFO_AFTER_LAST,
- NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
- * (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
- * (flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
-enum nl80211_sta_bss_param {
- __NL80211_STA_BSS_PARAM_INVALID,
- NL80211_STA_BSS_PARAM_CTS_PROT,
- NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
- NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
- NL80211_STA_BSS_PARAM_DTIM_PERIOD,
- NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
-
- /* keep last */
- __NL80211_STA_BSS_PARAM_AFTER_LAST,
- NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- * station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- * (see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- * attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- * containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-enum nl80211_sta_info {
- __NL80211_STA_INFO_INVALID,
- NL80211_STA_INFO_INACTIVE_TIME,
- NL80211_STA_INFO_RX_BYTES,
- NL80211_STA_INFO_TX_BYTES,
- NL80211_STA_INFO_LLID,
- NL80211_STA_INFO_PLID,
- NL80211_STA_INFO_PLINK_STATE,
- NL80211_STA_INFO_SIGNAL,
- NL80211_STA_INFO_TX_BITRATE,
- NL80211_STA_INFO_RX_PACKETS,
- NL80211_STA_INFO_TX_PACKETS,
- NL80211_STA_INFO_TX_RETRIES,
- NL80211_STA_INFO_TX_FAILED,
- NL80211_STA_INFO_SIGNAL_AVG,
- NL80211_STA_INFO_RX_BITRATE,
- NL80211_STA_INFO_BSS_PARAM,
- NL80211_STA_INFO_CONNECTED_TIME,
- NL80211_STA_INFO_STA_FLAGS,
- NL80211_STA_INFO_BEACON_LOSS,
- NL80211_STA_INFO_T_OFFSET,
-
- /* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
- NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
-enum nl80211_mpath_flags {
- NL80211_MPATH_FLAG_ACTIVE = 1<<0,
- NL80211_MPATH_FLAG_RESOLVING = 1<<1,
- NL80211_MPATH_FLAG_SN_VALID = 1<<2,
- NL80211_MPATH_FLAG_FIXED = 1<<3,
- NL80211_MPATH_FLAG_RESOLVED = 1<<4,
-};
-
-/**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * &enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- * currently defind
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
-enum nl80211_mpath_info {
- __NL80211_MPATH_INFO_INVALID,
- NL80211_MPATH_INFO_FRAME_QLEN,
- NL80211_MPATH_INFO_SN,
- NL80211_MPATH_INFO_METRIC,
- NL80211_MPATH_INFO_EXPTIME,
- NL80211_MPATH_INFO_FLAGS,
- NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
- NL80211_MPATH_INFO_DISCOVERY_RETRIES,
-
- /* keep last */
- __NL80211_MPATH_INFO_AFTER_LAST,
- NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- * an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- * an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- * defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
- * defined in 802.11ac
- * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_attr {
- __NL80211_BAND_ATTR_INVALID,
- NL80211_BAND_ATTR_FREQS,
- NL80211_BAND_ATTR_RATES,
-
- NL80211_BAND_ATTR_HT_MCS_SET,
- NL80211_BAND_ATTR_HT_CAPA,
- NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
- NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
-
- NL80211_BAND_ATTR_VHT_MCS_SET,
- NL80211_BAND_ATTR_VHT_CAPA,
-
- /* keep last */
- __NL80211_BAND_ATTR_AFTER_LAST,
- NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
-
-/**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- * regulatory domain.
- * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
- * permitted on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- * on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- * (100 * dBm).
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- * currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_frequency_attr {
- __NL80211_FREQUENCY_ATTR_INVALID,
- NL80211_FREQUENCY_ATTR_FREQ,
- NL80211_FREQUENCY_ATTR_DISABLED,
- NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
- NL80211_FREQUENCY_ATTR_NO_IBSS,
- NL80211_FREQUENCY_ATTR_RADAR,
- NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-
- /* keep last */
- __NL80211_FREQUENCY_ATTR_AFTER_LAST,
- NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
-
-/**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- * in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- * currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_bitrate_attr {
- __NL80211_BITRATE_ATTR_INVALID,
- NL80211_BITRATE_ATTR_RATE,
- NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
-
- /* keep last */
- __NL80211_BITRATE_ATTR_AFTER_LAST,
- NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 802.11 country information element with regulatory information it
- * thinks we should consider. cfg80211 only processes the country
- * code from the IE, and relies on the regulatory domain information
- * structure passed by userspace (CRDA) from our wireless-regdb.
- * If a channel is enabled but the country code indicates it should
- * be disabled we disable the channel and re-enable it upon disassociation.
- */
-enum nl80211_reg_initiator {
- NL80211_REGDOM_SET_BY_CORE,
- NL80211_REGDOM_SET_BY_USER,
- NL80211_REGDOM_SET_BY_DRIVER,
- NL80211_REGDOM_SET_BY_COUNTRY_IE,
-};
-
-/**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- * to a specific country. When this is set you can count on the
- * ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * driver specific world regulatory domain. These do not apply system-wide
- * and are only applicable to the individual devices which have requested
- * them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- * of an intersection between two regulatory domains -- the previously
- * set regulatory domain on the system and the last accepted regulatory
- * domain request to be processed.
- */
-enum nl80211_reg_type {
- NL80211_REGDOM_TYPE_COUNTRY,
- NL80211_REGDOM_TYPE_WORLD,
- NL80211_REGDOM_TYPE_CUSTOM_WORLD,
- NL80211_REGDOM_TYPE_INTERSECTION,
-};
-
-/**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * considerations for a given frequency range. These are the
- * &enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * rule in KHz. This is not a center of frequency but an actual regulatory
- * band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * in KHz. This is not a center a frequency but an actual regulatory
- * band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * for a given frequency range. The value is in mBi (100 * dBi).
- * If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- * currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_reg_rule_attr {
- __NL80211_REG_RULE_ATTR_INVALID,
- NL80211_ATTR_REG_RULE_FLAGS,
-
- NL80211_ATTR_FREQ_RANGE_START,
- NL80211_ATTR_FREQ_RANGE_END,
- NL80211_ATTR_FREQ_RANGE_MAX_BW,
-
- NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
- NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
- /* keep last */
- __NL80211_REG_RULE_ATTR_AFTER_LAST,
- NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- * BSS in scan results. Filtering is turned off if not specified.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- * attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_match_attr {
- __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
-
- NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
- NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
-
- /* keep last */
- __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
- NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
- __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
-};
-
-/* only for backward compatibility */
-#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
-
-/**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
- * @NL80211_RRF_NO_IBSS: no IBSS is allowed
- */
-enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_OFDM = 1<<0,
- NL80211_RRF_NO_CCK = 1<<1,
- NL80211_RRF_NO_INDOOR = 1<<2,
- NL80211_RRF_NO_OUTDOOR = 1<<3,
- NL80211_RRF_DFS = 1<<4,
- NL80211_RRF_PTP_ONLY = 1<<5,
- NL80211_RRF_PTMP_ONLY = 1<<6,
- NL80211_RRF_PASSIVE_SCAN = 1<<7,
- NL80211_RRF_NO_IBSS = 1<<8,
-};
-
-/**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
- * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
- */
-enum nl80211_dfs_regions {
- NL80211_DFS_UNSET = 0,
- NL80211_DFS_FCC = 1,
- NL80211_DFS_ETSI = 2,
- NL80211_DFS_JP = 3,
-};
-
-/**
- * enum nl80211_user_reg_hint_type - type of user regulatory hint
- *
- * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
- * assumed if the attribute is not set.
- * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
- * base station. Device drivers that have been tested to work
- * properly to support this type of hint can enable these hints
- * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
- * capability on the struct wiphy. The wireless core will
- * ignore all cell base station hints until at least one device
- * present has been registered with the wireless core that
- * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
- * supported feature.
- */
-enum nl80211_user_reg_hint_type {
- NL80211_USER_REG_HINT_USER = 0,
- NL80211_USER_REG_HINT_CELL_BASE = 1,
-};
-
-/**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- * spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
- * channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
- * channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- * receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- * transmitting data
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- * currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
-enum nl80211_survey_info {
- __NL80211_SURVEY_INFO_INVALID,
- NL80211_SURVEY_INFO_FREQUENCY,
- NL80211_SURVEY_INFO_NOISE,
- NL80211_SURVEY_INFO_IN_USE,
- NL80211_SURVEY_INFO_CHANNEL_TIME,
- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-
- /* keep last */
- __NL80211_SURVEY_INFO_AFTER_LAST,
- NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- * overrides all other flags.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
-enum nl80211_mntr_flags {
- __NL80211_MNTR_FLAG_INVALID,
- NL80211_MNTR_FLAG_FCSFAIL,
- NL80211_MNTR_FLAG_PLCPFAIL,
- NL80211_MNTR_FLAG_CONTROL,
- NL80211_MNTR_FLAG_OTHER_BSS,
- NL80211_MNTR_FLAG_COOK_FRAMES,
-
- /* keep last */
- __NL80211_MNTR_FLAG_AFTER_LAST,
- NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- * millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- * millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- * millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- * on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- * open retries that can be sent to establish a new peer link instance in a
- * mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- * point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- * open peer links when we detect compatible mesh peers.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- * containing a PREQ that an MP can send to a particular destination (path
- * target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- * (in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- * until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from
- * the root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which an MP can send only one action frame containing a PREQ
- * reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the
- * mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- * source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between
- * root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- * access to a broader network beyond the MBSS. This is done via Root
- * Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which a mesh STA can send only one Action frame containing a
- * PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- * or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- * threshold for average signal strength of candidate station to establish
- * a peer link.
- *
- * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- * to synchronize to for 11s default synchronization method
- * (see 11C.12.2.2)
- *
- * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
- * which mesh STAs receiving a proactive PREQ shall consider the forwarding
- * information to the root mesh STA to be valid.
- *
- * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
- * proactive PREQs are transmitted.
- *
- * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
- * (in TUs) during which a mesh STA can send only one Action frame
- * containing a PREQ element for root path confirmation.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_meshconf_params {
- __NL80211_MESHCONF_INVALID,
- NL80211_MESHCONF_RETRY_TIMEOUT,
- NL80211_MESHCONF_CONFIRM_TIMEOUT,
- NL80211_MESHCONF_HOLDING_TIMEOUT,
- NL80211_MESHCONF_MAX_PEER_LINKS,
- NL80211_MESHCONF_MAX_RETRIES,
- NL80211_MESHCONF_TTL,
- NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
- NL80211_MESHCONF_PATH_REFRESH_TIME,
- NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
- NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
- NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
- NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
- NL80211_MESHCONF_HWMP_ROOTMODE,
- NL80211_MESHCONF_ELEMENT_TTL,
- NL80211_MESHCONF_HWMP_RANN_INTERVAL,
- NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
- NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
- NL80211_MESHCONF_FORWARDING,
- NL80211_MESHCONF_RSSI_THRESHOLD,
- NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
- NL80211_MESHCONF_HT_OPMODE,
- NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
- NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
- NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
-
- /* keep last */
- __NL80211_MESHCONF_ATTR_AFTER_LAST,
- NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters. These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the
- * default HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- * vendor specific path metric or disable it to use the default Airtime
- * metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element
- * that vendors will use to identify the path selection methods and
- * metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- * daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames. AMPE is a secured version of
- * Mesh Peering Management (MPM) and is implemented with the assistance of
- * a userspace daemon. When this flag is set, the kernel will send peer
- * management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and
- * key management). When the flag is unset (default), the kernel can
- * autonomously complete (unsecured) mesh peering without the need of a
- * userspace daemon.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- * vendor specific synchronization method or disable it to use the default
- * neighbor offset synchronization
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
-enum nl80211_mesh_setup_params {
- __NL80211_MESH_SETUP_INVALID,
- NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
- NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
- NL80211_MESH_SETUP_IE,
- NL80211_MESH_SETUP_USERSPACE_AUTH,
- NL80211_MESH_SETUP_USERSPACE_AMPE,
- NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
-
- /* keep last */
- __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
- NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- * disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- * 2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- * 2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
-enum nl80211_txq_attr {
- __NL80211_TXQ_ATTR_INVALID,
- NL80211_TXQ_ATTR_AC,
- NL80211_TXQ_ATTR_TXOP,
- NL80211_TXQ_ATTR_CWMIN,
- NL80211_TXQ_ATTR_CWMAX,
- NL80211_TXQ_ATTR_AIFS,
-
- /* keep last */
- __NL80211_TXQ_ATTR_AFTER_LAST,
- NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
-};
-
-enum nl80211_ac {
- NL80211_AC_VO,
- NL80211_AC_VI,
- NL80211_AC_BE,
- NL80211_AC_BK,
- NL80211_NUM_ACS
-};
-
-/* backward compat */
-#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC
-#define NL80211_TXQ_Q_VO NL80211_AC_VO
-#define NL80211_TXQ_Q_VI NL80211_AC_VI
-#define NL80211_TXQ_Q_BE NL80211_AC_BE
-#define NL80211_TXQ_Q_BK NL80211_AC_BK
-
-enum nl80211_channel_type {
- NL80211_CHAN_NO_HT,
- NL80211_CHAN_HT20,
- NL80211_CHAN_HT40MINUS,
- NL80211_CHAN_HT40PLUS
-};
-
-/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- * raw information elements from the probe response/beacon (bin);
- * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
- * from a Probe Response frame; otherwise they are from a Beacon frame.
- * However, if the driver does not indicate the source of the IEs, these
- * IEs may be from either frame subtype.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- * in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- * in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- * elements from a Beacon frame (bin); not present if no Beacon frame has
- * yet been received
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-enum nl80211_bss {
- __NL80211_BSS_INVALID,
- NL80211_BSS_BSSID,
- NL80211_BSS_FREQUENCY,
- NL80211_BSS_TSF,
- NL80211_BSS_BEACON_INTERVAL,
- NL80211_BSS_CAPABILITY,
- NL80211_BSS_INFORMATION_ELEMENTS,
- NL80211_BSS_SIGNAL_MBM,
- NL80211_BSS_SIGNAL_UNSPEC,
- NL80211_BSS_STATUS,
- NL80211_BSS_SEEN_MS_AGO,
- NL80211_BSS_BEACON_IES,
-
- /* keep last */
- __NL80211_BSS_AFTER_LAST,
- NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
-enum nl80211_bss_status {
- NL80211_BSS_STATUS_AUTHENTICATED,
- NL80211_BSS_STATUS_ASSOCIATED,
- NL80211_BSS_STATUS_IBSS_JOINED,
-};
-
-/**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- * trying multiple times); this is invalid in netlink -- leave out
- * the attribute for this on CONNECT commands.
- */
-enum nl80211_auth_type {
- NL80211_AUTHTYPE_OPEN_SYSTEM,
- NL80211_AUTHTYPE_SHARED_KEY,
- NL80211_AUTHTYPE_FT,
- NL80211_AUTHTYPE_NETWORK_EAP,
-
- /* keep last */
- __NL80211_AUTHTYPE_NUM,
- NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
- NL80211_AUTHTYPE_AUTOMATIC
-};
-
-/**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
-enum nl80211_key_type {
- NL80211_KEYTYPE_GROUP,
- NL80211_KEYTYPE_PAIRWISE,
- NL80211_KEYTYPE_PEERKEY,
-
- NUM_NL80211_KEYTYPES
-};
-
-/**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- */
-enum nl80211_mfp {
- NL80211_MFP_NO,
- NL80211_MFP_REQUIRED,
-};
-
-enum nl80211_wpa_versions {
- NL80211_WPA_VERSION_1 = 1 << 0,
- NL80211_WPA_VERSION_2 = 1 << 1,
-};
-
-/**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- * unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- * multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
-enum nl80211_key_default_types {
- __NL80211_KEY_DEFAULT_TYPE_INVALID,
- NL80211_KEY_DEFAULT_TYPE_UNICAST,
- NL80211_KEY_DEFAULT_TYPE_MULTICAST,
-
- NUM_NL80211_KEY_DEFAULT_TYPES
-};
-
-/**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- * keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- * section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- * CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- * specified the default depends on whether a MAC address was
- * given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- * attributes, specifying what a key should be set as default as.
- * See &enum nl80211_key_default_types.
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
-enum nl80211_key_attributes {
- __NL80211_KEY_INVALID,
- NL80211_KEY_DATA,
- NL80211_KEY_IDX,
- NL80211_KEY_CIPHER,
- NL80211_KEY_SEQ,
- NL80211_KEY_DEFAULT,
- NL80211_KEY_DEFAULT_MGMT,
- NL80211_KEY_TYPE,
- NL80211_KEY_DEFAULT_TYPES,
-
- /* keep last */
- __NL80211_KEY_AFTER_LAST,
- NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- * 1 = 500 kbps) but without the IE length restriction (at most
- * %NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
- * in an array of MCS numbers.
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-enum nl80211_tx_rate_attributes {
- __NL80211_TXRATE_INVALID,
- NL80211_TXRATE_LEGACY,
- NL80211_TXRATE_MCS,
-
- /* keep last */
- __NL80211_TXRATE_AFTER_LAST,
- NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
- */
-enum nl80211_band {
- NL80211_BAND_2GHZ,
- NL80211_BAND_5GHZ,
- NL80211_BAND_60GHZ,
-};
-
-/**
- * enum nl80211_ps_state - powersave state
- * @NL80211_PS_DISABLED: powersave is disabled
- * @NL80211_PS_ENABLED: powersave is enabled
- */
-enum nl80211_ps_state {
- NL80211_PS_DISABLED,
- NL80211_PS_ENABLED,
-};
-
-/**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- * the threshold for the RSSI level at which an event will be sent. Zero
- * to disable.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- * the minimum amount the RSSI level must change after an event before a
- * new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- * consecutive packets were not acknowledged by the peer
- * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
- * during the given %NL80211_ATTR_CQM_TXE_INTVL before an
- * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
- * %NL80211_ATTR_CQM_TXE_PKTS is generated.
- * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
- * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
- * checked.
- * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
- * interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-enum nl80211_attr_cqm {
- __NL80211_ATTR_CQM_INVALID,
- NL80211_ATTR_CQM_RSSI_THOLD,
- NL80211_ATTR_CQM_RSSI_HYST,
- NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
- NL80211_ATTR_CQM_PKT_LOSS_EVENT,
- NL80211_ATTR_CQM_TXE_RATE,
- NL80211_ATTR_CQM_TXE_PKTS,
- NL80211_ATTR_CQM_TXE_INTVL,
-
- /* keep last */
- __NL80211_ATTR_CQM_AFTER_LAST,
- NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- * configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- * configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
- * (Note that deauth/disassoc will still follow if the AP is not
- * available. This event might get used as roaming event, etc.)
- */
-enum nl80211_cqm_rssi_threshold_event {
- NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
- NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
- NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
-};
-
-
-/**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
-enum nl80211_tx_power_setting {
- NL80211_TX_POWER_AUTOMATIC,
- NL80211_TX_POWER_LIMITED,
- NL80211_TX_POWER_FIXED,
-};
-
-/**
- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
- * a zero bit are ignored
- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
- * a bit for each byte in the pattern. The lowest-order bit corresponds
- * to the first byte of the pattern, but the bytes of the pattern are
- * in a little-endian-like format, i.e. the 9th byte of the pattern
- * corresponds to the lowest-order bit in the second byte of the mask.
- * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- * xx indicates "don't care") would be represented by a pattern of
- * twelve zero bytes, and a mask of "0xed,0x07".
- * Note that the pattern matching is done as though frames were not
- * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- * first (including SNAP header unpacking) and then matched.
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
- */
-enum nl80211_wowlan_packet_pattern_attr {
- __NL80211_WOWLAN_PKTPAT_INVALID,
- NL80211_WOWLAN_PKTPAT_MASK,
- NL80211_WOWLAN_PKTPAT_PATTERN,
-
- NUM_NL80211_WOWLAN_PKTPAT,
- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
-};
-
-/**
- * struct nl80211_wowlan_pattern_support - pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
- */
-struct nl80211_wowlan_pattern_support {
- __u32 max_patterns;
- __u32 min_pattern_len;
- __u32 max_pattern_len;
-} __attribute__((packed));
-
-/**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- * the chip into a special state -- works best with chips that have
- * support for low-power operation already (flag)
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- * is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- * by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- * which are passed in an array of nested attributes, each nested attribute
- * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- * Each pattern defines a wakeup packet. The matching is done on the MSDU,
- * i.e. as though the packet was an 802.3 packet, so the pattern matching
- * is done after the packet is converted to the MSDU.
- *
- * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- * carrying a &struct nl80211_wowlan_pattern_support.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- * used when setting, used only to indicate that GTK rekeying is supported
- * by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- * done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- * packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- * (on devices that have rfkill in the device) (flag)
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- */
-enum nl80211_wowlan_triggers {
- __NL80211_WOWLAN_TRIG_INVALID,
- NL80211_WOWLAN_TRIG_ANY,
- NL80211_WOWLAN_TRIG_DISCONNECT,
- NL80211_WOWLAN_TRIG_MAGIC_PKT,
- NL80211_WOWLAN_TRIG_PKT_PATTERN,
- NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
- NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
- NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
- NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
- NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-
- /* keep last */
- NUM_NL80211_WOWLAN_TRIG,
- MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
-};
-
-/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- * can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- * flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
-enum nl80211_iface_limit_attrs {
- NL80211_IFACE_LIMIT_UNSPEC,
- NL80211_IFACE_LIMIT_MAX,
- NL80211_IFACE_LIMIT_TYPES,
-
- /* keep last */
- NUM_NL80211_IFACE_LIMIT,
- MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
-};
-
-/**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- * for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- * interfaces that can be created in this group. This number doesn't
- * apply to interfaces purely managed in software, which are listed
- * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- * beacon intervals within this group must be all the same even for
- * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- * the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- * different channels may be used within this group.
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- * => allows an AP and a STA that must match BIs
- *
- * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- * => allows 8 of AP/GO
- *
- * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- * => allows two STAs on different channels
- *
- * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- * => allows a STA plus three P2P interfaces
- *
- * The list of these four possiblities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
-enum nl80211_if_combination_attrs {
- NL80211_IFACE_COMB_UNSPEC,
- NL80211_IFACE_COMB_LIMITS,
- NL80211_IFACE_COMB_MAXNUM,
- NL80211_IFACE_COMB_STA_AP_BI_MATCH,
- NL80211_IFACE_COMB_NUM_CHANNELS,
-
- /* keep last */
- NUM_NL80211_IFACE_COMB,
- MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
-};
-
-
-/**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- * state of non existant mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- * this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- * from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- * received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- * plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
-enum nl80211_plink_state {
- NL80211_PLINK_LISTEN,
- NL80211_PLINK_OPN_SNT,
- NL80211_PLINK_OPN_RCVD,
- NL80211_PLINK_CNF_RCVD,
- NL80211_PLINK_ESTAB,
- NL80211_PLINK_HOLDING,
- NL80211_PLINK_BLOCKED,
-
- /* keep last */
- NUM_NL80211_PLINK_STATES,
- MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
-};
-
-#define NL80211_KCK_LEN 16
-#define NL80211_KEK_LEN 16
-#define NL80211_REPLAY_CTR_LEN 8
-
-/**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-enum nl80211_rekey_data {
- __NL80211_REKEY_DATA_INVALID,
- NL80211_REKEY_DATA_KEK,
- NL80211_REKEY_DATA_KCK,
- NL80211_REKEY_DATA_REPLAY_CTR,
-
- /* keep last */
- NUM_NL80211_REKEY_DATA,
- MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
-};
-
-/**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- * Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- * in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- * element in Beacon frames but zero out each byte in the SSID
- */
-enum nl80211_hidden_ssid {
- NL80211_HIDDEN_SSID_NOT_IN_USE,
- NL80211_HIDDEN_SSID_ZERO_LEN,
- NL80211_HIDDEN_SSID_ZERO_CONTENTS
-};
-
-/**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- * is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- * as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
-enum nl80211_sta_wme_attr {
- __NL80211_STA_WME_INVALID,
- NL80211_STA_WME_UAPSD_QUEUES,
- NL80211_STA_WME_MAX_SP,
-
- /* keep last */
- __NL80211_STA_WME_AFTER_LAST,
- NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- * priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- * (internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- * (internal)
- */
-enum nl80211_pmksa_candidate_attr {
- __NL80211_PMKSA_CANDIDATE_INVALID,
- NL80211_PMKSA_CANDIDATE_INDEX,
- NL80211_PMKSA_CANDIDATE_BSSID,
- NL80211_PMKSA_CANDIDATE_PREAUTH,
-
- /* keep last */
- NUM_NL80211_PMKSA_CANDIDATE,
- MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
-};
-
-/**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
-enum nl80211_tdls_operation {
- NL80211_TDLS_DISCOVERY_REQ,
- NL80211_TDLS_SETUP,
- NL80211_TDLS_TEARDOWN,
- NL80211_TDLS_ENABLE_LINK,
- NL80211_TDLS_DISABLE_LINK,
-};
-
-/*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
- */
-
-/**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- * TX status to the socket error queue when requested with the
- * socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- * the connected inactive stations in AP mode.
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- * to work properly to suppport receiving regulatory hints from
- * cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- * in the interface combinations, even when it's only used for scan
- * and remain-on-channel. This could be due to, for example, the
- * remain-on-channel implementation requiring a channel context.
- */
-enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
-};
-
-/**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- * protocols for probe-response offloading by the driver/FW.
- * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- * Each enum value represents a bit in the bitmap of supported
- * protocols. Typically a subset of probe-requests belonging to a
- * supported protocol will be excluded from offload and uploaded
- * to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
-enum nl80211_probe_resp_offload_support_attr {
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
- NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
-};
-
-/**
- * enum nl80211_connect_failed_reason - connection request failed reasons
- * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
- * handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
- */
-enum nl80211_connect_failed_reason {
- NL80211_CONN_FAIL_MAX_CLIENTS,
- NL80211_CONN_FAIL_BLOCKED_CLIENT,
-};
-
-#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index e137b3c..a8696bb 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -8,236 +8,12 @@
Some of the constants in here are from the corresponding
NetBSD/OpenBSD header file, by Allen Briggs. We figured out the
rest of them on our own. */
-
#ifndef LINUX_NUBUS_H
#define LINUX_NUBUS_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <asm/nubus.h>
-#endif
-
-enum nubus_category {
- NUBUS_CAT_BOARD = 0x0001,
- NUBUS_CAT_DISPLAY = 0x0003,
- NUBUS_CAT_NETWORK = 0x0004,
- NUBUS_CAT_COMMUNICATIONS = 0x0006,
- NUBUS_CAT_FONT = 0x0009,
- NUBUS_CAT_CPU = 0x000A,
- /* For lack of a better name */
- NUBUS_CAT_DUODOCK = 0x0020
-};
-
-enum nubus_type_network {
- NUBUS_TYPE_ETHERNET = 0x0001,
- NUBUS_TYPE_RS232 = 0x0002
-};
-
-enum nubus_type_display {
- NUBUS_TYPE_VIDEO = 0x0001
-};
-
-enum nubus_type_cpu {
- NUBUS_TYPE_68020 = 0x0003,
- NUBUS_TYPE_68030 = 0x0004,
- NUBUS_TYPE_68040 = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- * 68030 motherboards: <10,4,0,24>
- * 68040 motherboards: <10,5,0,24>
- * DuoDock Plus: <32,1,1,2>
- *
- * Toby Frame Buffer card: <3,1,1,1>
- * RBV built-in video (IIci): <3,1,1,24>
- * Valkyrie built-in video (Q630): <3,1,1,46>
- * Macintosh Display Card: <3,1,1,25>
- * Sonora built-in video (P460): <3,1,1,34>
- * Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- * Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- * ROM on the above card: <2,1,0,0>
- * Cabletron ethernet card: <4,1,1,265>
- * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- * Kinetics EtherPort IIN: <4,1,259,262>
- * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- * Add your devices to the list! You can obtain the "Slots" utility
- * from Apple's FTP site at:
- * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- * Alternately, TattleTech can be found at any Info-Mac mirror site.
- * or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board. This
- is usually the one you want to look at when writing a driver. It's
- not as useful as you think, though, because as we should know by
- now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
- /* NUBUS_CAT_DISPLAY */
- NUBUS_DRSW_APPLE = 0x0001,
- NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */
-
- /* NUBUS_CAT_NETWORK */
- NUBUS_DRSW_3COM = 0x0000,
- NUBUS_DRSW_CABLETRON = 0x0001,
- NUBUS_DRSW_SONIC_LC = 0x0001,
- NUBUS_DRSW_KINETICS = 0x0103,
- NUBUS_DRSW_ASANTE = 0x0104,
- NUBUS_DRSW_TECHWORKS = 0x0109,
- NUBUS_DRSW_DAYNA = 0x010b,
- NUBUS_DRSW_FARALLON = 0x010c,
- NUBUS_DRSW_APPLE_SN = 0x010f,
- NUBUS_DRSW_DAYNA2 = 0x0115,
- NUBUS_DRSW_FOCUS = 0x011a,
- NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */
- NUBUS_DRSW_DAYNA_LC = 0x011e,
-
- /* NUBUS_CAT_CPU */
- NUBUS_DRSW_NONE = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
- least, it should... some video cards are known to incorrectly
- identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
- /* NUBUS_CAT_DISPLAY */
- NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */
- NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */
- NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */
- NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */
- NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */
- NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */
- NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */
- NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */
- NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */
- NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */
- NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
- NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */
- NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */
- NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */
- NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */
- NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */
- NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */
- NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */
- NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */
- NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */
- NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */
- NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */
- NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */
- NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */
- NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */
- NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */
- NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */
- NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
- NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */
- NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */
- NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */
-
- /* NUBUS_CAT_NETWORK */
- NUBUS_DRHW_INTERLAN = 0x0100,
- NUBUS_DRHW_SMC9194 = 0x0101,
- NUBUS_DRHW_KINETICS = 0x0106,
- NUBUS_DRHW_CABLETRON = 0x0109,
- NUBUS_DRHW_ASANTE_LC = 0x010f,
- NUBUS_DRHW_SONIC = 0x0110,
- NUBUS_DRHW_TECHWORKS = 0x0112,
- NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
- NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
- NUBUS_DRHW_FOCUS = 0x011c,
- NUBUS_DRHW_SONNET = 0x011d,
-};
+#include <uapi/linux/nubus.h>
-/* Resource IDs: These are the identifiers for the various weird and
- wonderful tidbits of information that may or may not reside in the
- NuBus ROM directory. */
-enum nubus_res_id {
- NUBUS_RESID_TYPE = 0x0001,
- NUBUS_RESID_NAME = 0x0002,
- NUBUS_RESID_ICON = 0x0003,
- NUBUS_RESID_DRVRDIR = 0x0004,
- NUBUS_RESID_LOADREC = 0x0005,
- NUBUS_RESID_BOOTREC = 0x0006,
- NUBUS_RESID_FLAGS = 0x0007,
- NUBUS_RESID_HWDEVID = 0x0008,
- NUBUS_RESID_MINOR_BASEOS = 0x000a,
- NUBUS_RESID_MINOR_LENGTH = 0x000b,
- NUBUS_RESID_MAJOR_BASEOS = 0x000c,
- NUBUS_RESID_MAJOR_LENGTH = 0x000d,
- NUBUS_RESID_CICN = 0x000f,
- NUBUS_RESID_ICL8 = 0x0010,
- NUBUS_RESID_ICL4 = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
- NUBUS_RESID_BOARDID = 0x0020,
- NUBUS_RESID_PRAMINITDATA = 0x0021,
- NUBUS_RESID_PRIMARYINIT = 0x0022,
- NUBUS_RESID_TIMEOUTCONST = 0x0023,
- NUBUS_RESID_VENDORINFO = 0x0024,
- NUBUS_RESID_BOARDFLAGS = 0x0025,
- NUBUS_RESID_SECONDINIT = 0x0026,
-
- /* Not sure why Apple put these next two in here */
- NUBUS_RESID_VIDNAMES = 0x0041,
- NUBUS_RESID_VIDMODES = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
- NUBUS_RESID_VEND_ID = 0x0001,
- NUBUS_RESID_VEND_SERIAL = 0x0002,
- NUBUS_RESID_VEND_REV = 0x0003,
- NUBUS_RESID_VEND_PART = 0x0004,
- NUBUS_RESID_VEND_DATE = 0x0005
-};
-
-enum nubus_net_res_id {
- NUBUS_RESID_MAC_ADDRESS = 0x0080
-};
-
-enum nubus_cpu_res_id {
- NUBUS_RESID_MEMINFO = 0x0081,
- NUBUS_RESID_ROMINFO = 0x0082
-};
-
-enum nubus_display_res_id {
- NUBUS_RESID_GAMMADIR = 0x0040,
- NUBUS_RESID_FIRSTMODE = 0x0080,
- NUBUS_RESID_SECONDMODE = 0x0081,
- NUBUS_RESID_THIRDMODE = 0x0082,
- NUBUS_RESID_FOURTHMODE = 0x0083,
- NUBUS_RESID_FIFTHMODE = 0x0084,
- NUBUS_RESID_SIXTHMODE = 0x0085
-};
-
-struct nubus_dir
-{
- unsigned char *base;
- unsigned char *ptr;
- int done;
- int mask;
-};
-
-struct nubus_dirent
-{
- unsigned char *base;
- unsigned char type;
- __u32 data; /* Actually 24bits used */
- int mask;
-};
-
-#ifdef __KERNEL__
struct nubus_board {
struct nubus_board* next;
struct nubus_dev* first_dev;
@@ -352,12 +128,4 @@ void nubus_get_rsrc_mem(void* dest,
void nubus_get_rsrc_str(void* dest,
const struct nubus_dirent *dirent,
int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
- return (void *)(0xF0000000|(slot<<24));
-}
-
#endif /* LINUX_NUBUS_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
index 9189829..cf0ff55 100644
--- a/include/linux/nvram.h
+++ b/include/linux/nvram.h
@@ -1,18 +1,8 @@
#ifndef _LINUX_NVRAM_H
#define _LINUX_NVRAM_H
-#include <linux/ioctl.h>
+#include <uapi/linux/nvram.h>
-/* /dev/nvram ioctls */
-#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE 14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
/* __foo is foo without grabbing the rtc_lock - get it yourself */
extern unsigned char __nvram_read_byte(int i);
extern unsigned char nvram_read_byte(int i);
@@ -20,6 +10,4 @@ extern void __nvram_write_byte(unsigned char c, int i);
extern void nvram_write_byte(unsigned char c, int i);
extern int __nvram_check_checksum(void);
extern int nvram_check_checksum(void);
-#endif
-
#endif /* _LINUX_NVRAM_H */
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
deleted file mode 100644
index c090cf9..0000000
--- a/include/linux/omap3isp.h
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * omap3isp.h
- *
- * TI OMAP3 ISP - User-space API
- *
- * Copyright (C) 2010 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- * Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef OMAP3_ISP_USER_H
-#define OMAP3_ISP_USER_H
-
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/*
- * Private IOCTLs
- *
- * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration
- * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration
- * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration
- * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration
- * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration
- * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data
- * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module
- */
-
-#define VIDIOC_OMAP3ISP_CCDC_CFG \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
-#define VIDIOC_OMAP3ISP_PRV_CFG \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
-#define VIDIOC_OMAP3ISP_AEWB_CFG \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
-#define VIDIOC_OMAP3ISP_HIST_CFG \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
-#define VIDIOC_OMAP3ISP_AF_CFG \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
-#define VIDIOC_OMAP3ISP_STAT_REQ \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
-#define VIDIOC_OMAP3ISP_STAT_EN \
- _IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
-
-/*
- * Events
- *
- * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
- * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
- * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
- */
-
-#define V4L2_EVENT_OMAP3ISP_CLASS (V4L2_EVENT_PRIVATE_START | 0x100)
-#define V4L2_EVENT_OMAP3ISP_AEWB (V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
-#define V4L2_EVENT_OMAP3ISP_AF (V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
-#define V4L2_EVENT_OMAP3ISP_HIST (V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
-
-struct omap3isp_stat_event_status {
- __u32 frame_number;
- __u16 config_counter;
- __u8 buf_err;
-};
-
-/* AE/AWB related structures and flags*/
-
-/* H3A Range Constants */
-#define OMAP3ISP_AEWB_MAX_SATURATION_LIM 1023
-#define OMAP3ISP_AEWB_MIN_WIN_H 2
-#define OMAP3ISP_AEWB_MAX_WIN_H 256
-#define OMAP3ISP_AEWB_MIN_WIN_W 6
-#define OMAP3ISP_AEWB_MAX_WIN_W 256
-#define OMAP3ISP_AEWB_MIN_WINVC 1
-#define OMAP3ISP_AEWB_MIN_WINHC 1
-#define OMAP3ISP_AEWB_MAX_WINVC 128
-#define OMAP3ISP_AEWB_MAX_WINHC 36
-#define OMAP3ISP_AEWB_MAX_WINSTART 4095
-#define OMAP3ISP_AEWB_MIN_SUB_INC 2
-#define OMAP3ISP_AEWB_MAX_SUB_INC 32
-#define OMAP3ISP_AEWB_MAX_BUF_SIZE 83600
-
-#define OMAP3ISP_AF_IIRSH_MIN 0
-#define OMAP3ISP_AF_IIRSH_MAX 4095
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN 1
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX 36
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN 1
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX 128
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN 2
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX 32
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN 2
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX 256
-#define OMAP3ISP_AF_PAXEL_WIDTH_MIN 16
-#define OMAP3ISP_AF_PAXEL_WIDTH_MAX 256
-#define OMAP3ISP_AF_PAXEL_HZSTART_MIN 1
-#define OMAP3ISP_AF_PAXEL_HZSTART_MAX 4095
-#define OMAP3ISP_AF_PAXEL_VTSTART_MIN 0
-#define OMAP3ISP_AF_PAXEL_VTSTART_MAX 4095
-#define OMAP3ISP_AF_THRESHOLD_MAX 255
-#define OMAP3ISP_AF_COEF_MAX 4095
-#define OMAP3ISP_AF_PAXEL_SIZE 48
-#define OMAP3ISP_AF_MAX_BUF_SIZE 221184
-
-/**
- * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
- * saturation_limit: Saturation limit.
- * @win_height: Window Height. Range 2 - 256, even values only.
- * @win_width: Window Width. Range 6 - 256, even values only.
- * @ver_win_count: Vertical Window Count. Range 1 - 128.
- * @hor_win_count: Horizontal Window Count. Range 1 - 36.
- * @ver_win_start: Vertical Window Start. Range 0 - 4095.
- * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
- * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
- * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
- * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
- * values only.
- * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
- * values only.
- * @alaw_enable: AEW ALAW EN flag.
- */
-struct omap3isp_h3a_aewb_config {
- /*
- * Common fields.
- * They should be the first ones and must be in the same order as in
- * ispstat_generic_config struct.
- */
- __u32 buf_size;
- __u16 config_counter;
-
- /* Private fields */
- __u16 saturation_limit;
- __u16 win_height;
- __u16 win_width;
- __u16 ver_win_count;
- __u16 hor_win_count;
- __u16 ver_win_start;
- __u16 hor_win_start;
- __u16 blk_ver_win_start;
- __u16 blk_win_height;
- __u16 subsample_ver_inc;
- __u16 subsample_hor_inc;
- __u8 alaw_enable;
-};
-
-/**
- * struct omap3isp_stat_data - Statistic data sent to or received from user
- * @ts: Timestamp of returned framestats.
- * @buf: Pointer to pass to user.
- * @frame_number: Frame number of requested stats.
- * @cur_frame: Current frame number being processed.
- * @config_counter: Number of the configuration associated with the data.
- */
-struct omap3isp_stat_data {
- struct timeval ts;
- void __user *buf;
- __u32 buf_size;
- __u16 frame_number;
- __u16 cur_frame;
- __u16 config_counter;
-};
-
-
-/* Histogram related structs */
-
-/* Flags for number of bins */
-#define OMAP3ISP_HIST_BINS_32 0
-#define OMAP3ISP_HIST_BINS_64 1
-#define OMAP3ISP_HIST_BINS_128 2
-#define OMAP3ISP_HIST_BINS_256 3
-
-/* Number of bins * 4 colors * 4-bytes word */
-#define OMAP3ISP_HIST_MEM_SIZE_BINS(n) ((1 << ((n)+5))*4*4)
-
-#define OMAP3ISP_HIST_MEM_SIZE 1024
-#define OMAP3ISP_HIST_MIN_REGIONS 1
-#define OMAP3ISP_HIST_MAX_REGIONS 4
-#define OMAP3ISP_HIST_MAX_WB_GAIN 255
-#define OMAP3ISP_HIST_MIN_WB_GAIN 0
-#define OMAP3ISP_HIST_MAX_BIT_WIDTH 14
-#define OMAP3ISP_HIST_MIN_BIT_WIDTH 8
-#define OMAP3ISP_HIST_MAX_WG 4
-#define OMAP3ISP_HIST_MAX_BUF_SIZE 4096
-
-/* Source */
-#define OMAP3ISP_HIST_SOURCE_CCDC 0
-#define OMAP3ISP_HIST_SOURCE_MEM 1
-
-/* CFA pattern */
-#define OMAP3ISP_HIST_CFA_BAYER 0
-#define OMAP3ISP_HIST_CFA_FOVEONX3 1
-
-struct omap3isp_hist_region {
- __u16 h_start;
- __u16 h_end;
- __u16 v_start;
- __u16 v_end;
-};
-
-struct omap3isp_hist_config {
- /*
- * Common fields.
- * They should be the first ones and must be in the same order as in
- * ispstat_generic_config struct.
- */
- __u32 buf_size;
- __u16 config_counter;
-
- __u8 num_acc_frames; /* Num of image frames to be processed and
- accumulated for each histogram frame */
- __u16 hist_bins; /* number of bins: 32, 64, 128, or 256 */
- __u8 cfa; /* BAYER or FOVEON X3 */
- __u8 wg[OMAP3ISP_HIST_MAX_WG]; /* White Balance Gain */
- __u8 num_regions; /* number of regions to be configured */
- struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
-};
-
-/* Auto Focus related structs */
-
-#define OMAP3ISP_AF_NUM_COEF 11
-
-enum omap3isp_h3a_af_fvmode {
- OMAP3ISP_AF_MODE_SUMMED = 0,
- OMAP3ISP_AF_MODE_PEAK = 1
-};
-
-/* Red, Green, and blue pixel location in the AF windows */
-enum omap3isp_h3a_af_rgbpos {
- OMAP3ISP_AF_GR_GB_BAYER = 0, /* GR and GB as Bayer pattern */
- OMAP3ISP_AF_RG_GB_BAYER = 1, /* RG and GB as Bayer pattern */
- OMAP3ISP_AF_GR_BG_BAYER = 2, /* GR and BG as Bayer pattern */
- OMAP3ISP_AF_RG_BG_BAYER = 3, /* RG and BG as Bayer pattern */
- OMAP3ISP_AF_GG_RB_CUSTOM = 4, /* GG and RB as custom pattern */
- OMAP3ISP_AF_RB_GG_CUSTOM = 5 /* RB and GG as custom pattern */
-};
-
-/* Contains the information regarding the Horizontal Median Filter */
-struct omap3isp_h3a_af_hmf {
- __u8 enable; /* Status of Horizontal Median Filter */
- __u8 threshold; /* Threshold Value for Horizontal Median Filter */
-};
-
-/* Contains the information regarding the IIR Filters */
-struct omap3isp_h3a_af_iir {
- __u16 h_start; /* IIR horizontal start */
- __u16 coeff_set0[OMAP3ISP_AF_NUM_COEF]; /* Filter coefficient, set 0 */
- __u16 coeff_set1[OMAP3ISP_AF_NUM_COEF]; /* Filter coefficient, set 1 */
-};
-
-/* Contains the information regarding the Paxels Structure in AF Engine */
-struct omap3isp_h3a_af_paxel {
- __u16 h_start; /* Horizontal Start Position */
- __u16 v_start; /* Vertical Start Position */
- __u8 width; /* Width of the Paxel */
- __u8 height; /* Height of the Paxel */
- __u8 h_cnt; /* Horizontal Count */
- __u8 v_cnt; /* vertical Count */
- __u8 line_inc; /* Line Increment */
-};
-
-/* Contains the parameters required for hardware set up of AF Engine */
-struct omap3isp_h3a_af_config {
- /*
- * Common fields.
- * They should be the first ones and must be in the same order as in
- * ispstat_generic_config struct.
- */
- __u32 buf_size;
- __u16 config_counter;
-
- struct omap3isp_h3a_af_hmf hmf; /* HMF configurations */
- struct omap3isp_h3a_af_iir iir; /* IIR filter configurations */
- struct omap3isp_h3a_af_paxel paxel; /* Paxel parameters */
- enum omap3isp_h3a_af_rgbpos rgb_pos; /* RGB Positions */
- enum omap3isp_h3a_af_fvmode fvmode; /* Accumulator mode */
- __u8 alaw_enable; /* AF ALAW status */
-};
-
-/* ISP CCDC structs */
-
-/* Abstraction layer CCDC configurations */
-#define OMAP3ISP_CCDC_ALAW (1 << 0)
-#define OMAP3ISP_CCDC_LPF (1 << 1)
-#define OMAP3ISP_CCDC_BLCLAMP (1 << 2)
-#define OMAP3ISP_CCDC_BCOMP (1 << 3)
-#define OMAP3ISP_CCDC_FPC (1 << 4)
-#define OMAP3ISP_CCDC_CULL (1 << 5)
-#define OMAP3ISP_CCDC_CONFIG_LSC (1 << 7)
-#define OMAP3ISP_CCDC_TBL_LSC (1 << 8)
-
-#define OMAP3ISP_RGB_MAX 3
-
-/* Enumeration constants for Alaw input width */
-enum omap3isp_alaw_ipwidth {
- OMAP3ISP_ALAW_BIT12_3 = 0x3,
- OMAP3ISP_ALAW_BIT11_2 = 0x4,
- OMAP3ISP_ALAW_BIT10_1 = 0x5,
- OMAP3ISP_ALAW_BIT9_0 = 0x6
-};
-
-/**
- * struct omap3isp_ccdc_lsc_config - LSC configuration
- * @offset: Table Offset of the gain table.
- * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
- * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
- * @gain_format: Gain table format.
- * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
- * @fmtlnh: Number of pixels in horizontal direction to use for the data
- * reformatter.
- * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
- * @fmtlnv: Number of lines in vertical direction for the data reformatter.
- * @initial_x: X position, in pixels, of the first active pixel in reference
- * to the first active paxel. Must be an even number.
- * @initial_y: Y position, in pixels, of the first active pixel in reference
- * to the first active paxel. Must be an even number.
- * @size: Size of LSC gain table. Filled when loaded from userspace.
- */
-struct omap3isp_ccdc_lsc_config {
- __u16 offset;
- __u8 gain_mode_n;
- __u8 gain_mode_m;
- __u8 gain_format;
- __u16 fmtsph;
- __u16 fmtlnh;
- __u16 fmtslv;
- __u16 fmtlnv;
- __u8 initial_x;
- __u8 initial_y;
- __u32 size;
-};
-
-/**
- * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
- * @obgain: Optical black average gain.
- * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
- * @oblines: Optical Black Sample lines.
- * @oblen: Optical Black Sample Length.
- * @dcsubval: Digital Black Clamp subtract value.
- */
-struct omap3isp_ccdc_bclamp {
- __u8 obgain;
- __u8 obstpixel;
- __u8 oblines;
- __u8 oblen;
- __u16 dcsubval;
-};
-
-/**
- * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
- * @fpnum: Number of faulty pixels to be corrected in the frame.
- * @fpcaddr: Memory address of the FPC Table
- */
-struct omap3isp_ccdc_fpc {
- __u16 fpnum;
- __u32 fpcaddr;
-};
-
-/**
- * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
- * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
- * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
- * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
- * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
- */
-struct omap3isp_ccdc_blcomp {
- __u8 b_mg;
- __u8 gb_g;
- __u8 gr_cy;
- __u8 r_ye;
-};
-
-/**
- * omap3isp_ccdc_culling - Culling parameters
- * @v_pattern: Vertical culling pattern.
- * @h_odd: Horizontal Culling pattern for odd lines.
- * @h_even: Horizontal Culling pattern for even lines.
- */
-struct omap3isp_ccdc_culling {
- __u8 v_pattern;
- __u16 h_odd;
- __u16 h_even;
-};
-
-/**
- * omap3isp_ccdc_update_config - CCDC configuration
- * @update: Specifies which CCDC registers should be updated.
- * @flag: Specifies which CCDC functions should be enabled.
- * @alawip: Enable/Disable A-Law compression.
- * @bclamp: Black clamp control register.
- * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
- * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
- * @cull: Cull control register.
- * @lsc: Pointer to LSC gain table.
- */
-struct omap3isp_ccdc_update_config {
- __u16 update;
- __u16 flag;
- enum omap3isp_alaw_ipwidth alawip;
- struct omap3isp_ccdc_bclamp __user *bclamp;
- struct omap3isp_ccdc_blcomp __user *blcomp;
- struct omap3isp_ccdc_fpc __user *fpc;
- struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
- struct omap3isp_ccdc_culling __user *cull;
- __u8 __user *lsc;
-};
-
-/* Preview configurations */
-#define OMAP3ISP_PREV_LUMAENH (1 << 0)
-#define OMAP3ISP_PREV_INVALAW (1 << 1)
-#define OMAP3ISP_PREV_HRZ_MED (1 << 2)
-#define OMAP3ISP_PREV_CFA (1 << 3)
-#define OMAP3ISP_PREV_CHROMA_SUPP (1 << 4)
-#define OMAP3ISP_PREV_WB (1 << 5)
-#define OMAP3ISP_PREV_BLKADJ (1 << 6)
-#define OMAP3ISP_PREV_RGB2RGB (1 << 7)
-#define OMAP3ISP_PREV_COLOR_CONV (1 << 8)
-#define OMAP3ISP_PREV_YC_LIMIT (1 << 9)
-#define OMAP3ISP_PREV_DEFECT_COR (1 << 10)
-/* Bit 11 was OMAP3ISP_PREV_GAMMABYPASS, now merged with OMAP3ISP_PREV_GAMMA */
-#define OMAP3ISP_PREV_DRK_FRM_CAPTURE (1 << 12)
-#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT (1 << 13)
-#define OMAP3ISP_PREV_LENS_SHADING (1 << 14)
-#define OMAP3ISP_PREV_NF (1 << 15)
-#define OMAP3ISP_PREV_GAMMA (1 << 16)
-
-#define OMAP3ISP_PREV_NF_TBL_SIZE 64
-#define OMAP3ISP_PREV_CFA_TBL_SIZE 576
-#define OMAP3ISP_PREV_CFA_BLK_SIZE (OMAP3ISP_PREV_CFA_TBL_SIZE / 4)
-#define OMAP3ISP_PREV_GAMMA_TBL_SIZE 1024
-#define OMAP3ISP_PREV_YENH_TBL_SIZE 128
-
-#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS 4
-
-/**
- * struct omap3isp_prev_hmed - Horizontal Median Filter
- * @odddist: Distance between consecutive pixels of same color in the odd line.
- * @evendist: Distance between consecutive pixels of same color in the even
- * line.
- * @thres: Horizontal median filter threshold.
- */
-struct omap3isp_prev_hmed {
- __u8 odddist;
- __u8 evendist;
- __u8 thres;
-};
-
-/*
- * Enumeration for CFA Formats supported by preview
- */
-enum omap3isp_cfa_fmt {
- OMAP3ISP_CFAFMT_BAYER,
- OMAP3ISP_CFAFMT_SONYVGA,
- OMAP3ISP_CFAFMT_RGBFOVEON,
- OMAP3ISP_CFAFMT_DNSPL,
- OMAP3ISP_CFAFMT_HONEYCOMB,
- OMAP3ISP_CFAFMT_RRGGBBFOVEON
-};
-
-/**
- * struct omap3isp_prev_cfa - CFA Interpolation
- * @format: CFA Format Enum value supported by preview.
- * @gradthrs_vert: CFA Gradient Threshold - Vertical.
- * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
- * @table: Pointer to the CFA table.
- */
-struct omap3isp_prev_cfa {
- enum omap3isp_cfa_fmt format;
- __u8 gradthrs_vert;
- __u8 gradthrs_horz;
- __u32 table[4][OMAP3ISP_PREV_CFA_BLK_SIZE];
-};
-
-/**
- * struct omap3isp_prev_csup - Chrominance Suppression
- * @gain: Gain.
- * @thres: Threshold.
- * @hypf_en: Flag to enable/disable the High Pass Filter.
- */
-struct omap3isp_prev_csup {
- __u8 gain;
- __u8 thres;
- __u8 hypf_en;
-};
-
-/**
- * struct omap3isp_prev_wbal - White Balance
- * @dgain: Digital gain (U10Q8).
- * @coef3: White balance gain - COEF 3 (U8Q5).
- * @coef2: White balance gain - COEF 2 (U8Q5).
- * @coef1: White balance gain - COEF 1 (U8Q5).
- * @coef0: White balance gain - COEF 0 (U8Q5).
- */
-struct omap3isp_prev_wbal {
- __u16 dgain;
- __u8 coef3;
- __u8 coef2;
- __u8 coef1;
- __u8 coef0;
-};
-
-/**
- * struct omap3isp_prev_blkadj - Black Level Adjustment
- * @red: Black level offset adjustment for Red in 2's complement format
- * @green: Black level offset adjustment for Green in 2's complement format
- * @blue: Black level offset adjustment for Blue in 2's complement format
- */
-struct omap3isp_prev_blkadj {
- /*Black level offset adjustment for Red in 2's complement format */
- __u8 red;
- /*Black level offset adjustment for Green in 2's complement format */
- __u8 green;
- /* Black level offset adjustment for Blue in 2's complement format */
- __u8 blue;
-};
-
-/**
- * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
- * @matrix: Blending values(S12Q8 format)
- * [RR] [GR] [BR]
- * [RG] [GG] [BG]
- * [RB] [GB] [BB]
- * @offset: Blending offset value for R,G,B in 2's complement integer format.
- */
-struct omap3isp_prev_rgbtorgb {
- __u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
- __u16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
- * @matrix: Color space conversion coefficients(S10Q8)
- * [CSCRY] [CSCGY] [CSCBY]
- * [CSCRCB] [CSCGCB] [CSCBCB]
- * [CSCRCR] [CSCGCR] [CSCBCR]
- * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
- */
-struct omap3isp_prev_csc {
- __u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
- __s16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_yclimit - Y, C Value Limit
- * @minC: Minimum C value
- * @maxC: Maximum C value
- * @minY: Minimum Y value
- * @maxY: Maximum Y value
- */
-struct omap3isp_prev_yclimit {
- __u8 minC;
- __u8 maxC;
- __u8 minY;
- __u8 maxY;
-};
-
-/**
- * struct omap3isp_prev_dcor - Defect correction
- * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
- * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
- */
-struct omap3isp_prev_dcor {
- __u8 couplet_mode_en;
- __u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
-};
-
-/**
- * struct omap3isp_prev_nf - Noise Filter
- * @spread: Spread value to be used in Noise Filter
- * @table: Pointer to the Noise Filter table
- */
-struct omap3isp_prev_nf {
- __u8 spread;
- __u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_gtables - Gamma correction tables
- * @red: Array for red gamma table.
- * @green: Array for green gamma table.
- * @blue: Array for blue gamma table.
- */
-struct omap3isp_prev_gtables {
- __u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
- __u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
- __u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_luma - Luma enhancement
- * @table: Array for luma enhancement table.
- */
-struct omap3isp_prev_luma {
- __u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_update_config - Preview engine configuration (user)
- * @update: Specifies which ISP Preview registers should be updated.
- * @flag: Specifies which ISP Preview functions should be enabled.
- * @shading_shift: 3bit value of shift used in shading compensation.
- * @luma: Pointer to luma enhancement structure.
- * @hmed: Pointer to structure containing the odd and even distance.
- * between the pixels in the image along with the filter threshold.
- * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
- * format in the image, vertical and horizontal gradient threshold.
- * @csup: Pointer to Structure for Chrominance Suppression coefficients.
- * @wbal: Pointer to structure for White Balance.
- * @blkadj: Pointer to structure for Black Adjustment.
- * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
- * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
- * @yclimit: Pointer to structure for Y, C Value Limit.
- * @dcor: Pointer to structure for defect correction.
- * @nf: Pointer to structure for Noise Filter
- * @gamma: Pointer to gamma structure.
- */
-struct omap3isp_prev_update_config {
- __u32 update;
- __u32 flag;
- __u32 shading_shift;
- struct omap3isp_prev_luma __user *luma;
- struct omap3isp_prev_hmed __user *hmed;
- struct omap3isp_prev_cfa __user *cfa;
- struct omap3isp_prev_csup __user *csup;
- struct omap3isp_prev_wbal __user *wbal;
- struct omap3isp_prev_blkadj __user *blkadj;
- struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
- struct omap3isp_prev_csc __user *csc;
- struct omap3isp_prev_yclimit __user *yclimit;
- struct omap3isp_prev_dcor __user *dcor;
- struct omap3isp_prev_nf __user *nf;
- struct omap3isp_prev_gtables __user *gamma;
-};
-
-#endif /* OMAP3_ISP_USER_H */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85af818..d1f4dcc 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -20,205 +20,11 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-
#ifndef __LINUX_OMAPFB_H__
#define __LINUX_OMAPFB_H__
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
-#define OMAP_IO(num) _IO('O', num)
-
-#define OMAPFB_MIRROR OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX OMAP_IO(37)
-#define OMAPFB_VSYNC OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC OMAP_IO(57)
-#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK 0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
-#define OMAPFB_CAPS_TEARSYNC 0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK 0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM 0
-#define OMAPFB_MEMTYPE_SRAM 1
-#define OMAPFB_MEMTYPE_MAX 1
-
-#define OMAPFB_MEM_IDX_ENABLED 0x80
-#define OMAPFB_MEM_IDX_MASK 0x7f
-
-enum omapfb_color_format {
- OMAPFB_COLOR_RGB565 = 0,
- OMAPFB_COLOR_YUV422,
- OMAPFB_COLOR_YUV420,
- OMAPFB_COLOR_CLUT_8BPP,
- OMAPFB_COLOR_CLUT_4BPP,
- OMAPFB_COLOR_CLUT_2BPP,
- OMAPFB_COLOR_CLUT_1BPP,
- OMAPFB_COLOR_RGB444,
- OMAPFB_COLOR_YUY422,
-
- OMAPFB_COLOR_ARGB16,
- OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */
- OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */
- OMAPFB_COLOR_ARGB32,
- OMAPFB_COLOR_RGBA32,
- OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
- __u32 out_x, out_y;
- __u32 out_width, out_height;
- __u32 reserved[8];
-};
+#include <uapi/linux/omapfb.h>
-struct omapfb_update_window_old {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
-};
-
-enum omapfb_plane {
- OMAPFB_PLANE_GFX = 0,
- OMAPFB_PLANE_VID1,
- OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
- OMAPFB_CHANNEL_OUT_LCD = 0,
- OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
- __u32 pos_x;
- __u32 pos_y;
- __u8 enabled;
- __u8 channel_out;
- __u8 mirror;
- __u8 mem_idx;
- __u32 out_width;
- __u32 out_height;
- __u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
- __u32 size;
- __u8 type;
- __u8 reserved[3];
-};
-
-struct omapfb_caps {
- __u32 ctrl;
- __u32 plane_color;
- __u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
- OMAPFB_COLOR_KEY_DISABLED = 0,
- OMAPFB_COLOR_KEY_GFX_DST,
- OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
- __u8 channel_out;
- __u32 background;
- __u32 trans_key;
- __u8 key_type;
-};
-
-enum omapfb_update_mode {
- OMAPFB_UPDATE_DISABLED = 0,
- OMAPFB_AUTO_UPDATE,
- OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
- __u16 x;
- __u16 y;
- __u16 w;
- __u16 h;
- size_t buffer_size;
- void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
- __u8 overlay_idx;
- __u8 mode_idx;
- __u32 bits_per_pixel;
- __u32 nonstd;
- struct fb_bitfield red;
- struct fb_bitfield green;
- struct fb_bitfield blue;
- struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
- __u32 total;
- __u32 free;
- __u32 largest_free_block;
- __u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
- __u8 enabled;
- __u8 reserved1[3];
- __u16 line;
- __u16 reserved2;
-};
-
-struct omapfb_display_info {
- __u16 xres;
- __u16 yres;
- __u32 width; /* phys width of the display in micrometers */
- __u32 height; /* phys height of the display in micrometers */
- __u32 reserved[5];
-};
-
-#ifdef __KERNEL__
struct omap_lcd_config {
char panel_name[16];
@@ -233,6 +39,4 @@ struct omapfb_platform_data {
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
-#endif
-
#endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
index d36a822..fb98268 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,18 +1,11 @@
#ifndef __INCLUDE_LINUX_OOM_H
#define __INCLUDE_LINUX_OOM_H
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN (-1000)
-#define OOM_SCORE_ADJ_MAX 1000
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/nodemask.h>
+#include <uapi/linux/oom.h>
struct zonelist;
struct notifier_block;
@@ -82,5 +75,4 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p);
extern int sysctl_oom_dump_tasks;
extern int sysctl_oom_kill_allocating_task;
extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
#endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/packet_diag.h b/include/linux/packet_diag.h
deleted file mode 100644
index 93f5fa9..0000000
--- a/include/linux/packet_diag.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __PACKET_DIAG_H__
-#define __PACKET_DIAG_H__
-
-#include <linux/types.h>
-
-struct packet_diag_req {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
- __u16 pad;
- __u32 pdiag_ino;
- __u32 pdiag_show;
- __u32 pdiag_cookie[2];
-};
-
-#define PACKET_SHOW_INFO 0x00000001 /* Basic packet_sk information */
-#define PACKET_SHOW_MCLIST 0x00000002 /* A set of packet_diag_mclist-s */
-#define PACKET_SHOW_RING_CFG 0x00000004 /* Rings configuration parameters */
-#define PACKET_SHOW_FANOUT 0x00000008
-
-struct packet_diag_msg {
- __u8 pdiag_family;
- __u8 pdiag_type;
- __u16 pdiag_num;
-
- __u32 pdiag_ino;
- __u32 pdiag_cookie[2];
-};
-
-enum {
- PACKET_DIAG_INFO,
- PACKET_DIAG_MCLIST,
- PACKET_DIAG_RX_RING,
- PACKET_DIAG_TX_RING,
- PACKET_DIAG_FANOUT,
-
- PACKET_DIAG_MAX,
-};
-
-struct packet_diag_info {
- __u32 pdi_index;
- __u32 pdi_version;
- __u32 pdi_reserve;
- __u32 pdi_copy_thresh;
- __u32 pdi_tstamp;
- __u32 pdi_flags;
-
-#define PDI_RUNNING 0x1
-#define PDI_AUXDATA 0x2
-#define PDI_ORIGDEV 0x4
-#define PDI_VNETHDR 0x8
-#define PDI_LOSS 0x10
-};
-
-struct packet_diag_mclist {
- __u32 pdmc_index;
- __u32 pdmc_count;
- __u16 pdmc_type;
- __u16 pdmc_alen;
- __u8 pdmc_addr[MAX_ADDR_LEN];
-};
-
-struct packet_diag_ring {
- __u32 pdr_block_size;
- __u32 pdr_block_nr;
- __u32 pdr_frame_size;
- __u32 pdr_frame_nr;
- __u32 pdr_retire_tmo;
- __u32 pdr_sizeof_priv;
- __u32 pdr_features;
-};
-
-#endif
diff --git a/include/linux/param.h b/include/linux/param.h
deleted file mode 100644
index 092e92f..0000000
--- a/include/linux/param.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_PARAM_H
-#define _LINUX_PARAM_H
-
-#include <asm/param.h>
-
-#endif
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 106c2ca..c22f125 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -3,96 +3,9 @@
* the GNU Free Documentation License, Version 1.1 or any later version
* published by the Free Software Foundation.
*/
-
#ifndef _PARPORT_H_
#define _PARPORT_H_
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX 16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE -1
-#define PARPORT_DMA_NONE -1
-#define PARPORT_IRQ_AUTO -2
-#define PARPORT_DMA_AUTO -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE 0x1
-#define PARPORT_CONTROL_AUTOFD 0x2
-#define PARPORT_CONTROL_INIT 0x4
-#define PARPORT_CONTROL_SELECT 0x8
-
-#define PARPORT_STATUS_ERROR 0x8
-#define PARPORT_STATUS_SELECT 0x10
-#define PARPORT_STATUS_PAPEROUT 0x20
-#define PARPORT_STATUS_ACK 0x40
-#define PARPORT_STATUS_BUSY 0x80
-
-/* Type classes for Plug-and-Play probe. */
-typedef enum {
- PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
- PARPORT_CLASS_PRINTER,
- PARPORT_CLASS_MODEM,
- PARPORT_CLASS_NET,
- PARPORT_CLASS_HDC, /* Hard disk controller */
- PARPORT_CLASS_PCMCIA,
- PARPORT_CLASS_MEDIA, /* Multimedia device */
- PARPORT_CLASS_FDC, /* Floppy disk controller */
- PARPORT_CLASS_PORTS,
- PARPORT_CLASS_SCANNER,
- PARPORT_CLASS_DIGCAM,
- PARPORT_CLASS_OTHER, /* Anything else */
- PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
- PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
- capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes:
- Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
- 'extensibility request' values. Others are special.
- 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */
-#define IEEE1284_MODE_NIBBLE 0
-#define IEEE1284_MODE_BYTE (1<<0)
-#define IEEE1284_MODE_COMPAT (1<<8)
-#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP (1<<4)
-#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP (1<<6)
-#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID (1<<2) /* This is a flag */
-#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the
- * extensibility link to
- * be requested, using
- * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations. They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR (1<<13) /* This is a flag */
-#define IEEE1284_DATA 0 /* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
#include <linux/jiffies.h>
#include <linux/proc_fs.h>
@@ -101,6 +14,7 @@ typedef enum {
#include <linux/irqreturn.h>
#include <linux/semaphore.h>
#include <asm/ptrace.h>
+#include <uapi/linux/parport.h>
/* Define this later. */
struct parport;
@@ -564,5 +478,4 @@ extern int parport_device_proc_unregister(struct pardevice *device);
extern unsigned long parport_default_timeslice;
extern int parport_default_spintime;
-#endif /* __KERNEL__ */
#endif /* _PARPORT_H_ */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
index aefda0e..97a919f 100644
--- a/include/linux/patchkey.h
+++ b/include/linux/patchkey.h
@@ -9,22 +9,12 @@
* Do not include this file directly. Please use <sys/soundcard.h> instead.
* For kernel code, use <linux/soundcard.h>
*/
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
#ifndef _LINUX_PATCHKEY_H
#define _LINUX_PATCHKEY_H
-/* Endian macros. */
-#ifdef __KERNEL__
# include <asm/byteorder.h>
-#else
-# include <endian.h>
-#endif
+#include <uapi/linux/patchkey.h>
-#if defined(__KERNEL__)
# if defined(__BIG_ENDIAN)
# define _PATCHKEY(id) (0xfd00|id)
# elif defined(__LITTLE_ENDIAN)
@@ -32,16 +22,4 @@
# else
# error "could not determine byte order"
# endif
-#else
-#if defined(__BYTE_ORDER)
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define _PATCHKEY(id) (0xfd00|id)
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-# define _PATCHKEY(id) ((id<<8)|0x00fd)
-# else
-# error "could not determine byte order"
-# endif
-#endif
-#endif
-
#endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index be1de01..ee21795 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -13,32 +13,9 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*/
-
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
-#include <linux/pci_regs.h> /* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices. The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- * 7:3 = slot
- * 2:0 = function
- */
-#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn) ((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
#include <linux/mod_devicetable.h>
@@ -53,6 +30,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irqreturn.h>
+#include <uapi/linux/pci.h>
/* Include the ID list */
#include <linux/pci_ids.h>
@@ -1831,5 +1809,4 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
*/
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
-#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
deleted file mode 100644
index 20ae747..0000000
--- a/include/linux/pci_regs.h
+++ /dev/null
@@ -1,846 +0,0 @@
-/*
- * pci_regs.h
- *
- * PCI standard defines
- * Copyright 1994, Drew Eckhardt
- * Copyright 1997--1999 Martin Mares <mj@ucw.cz>
- *
- * For more information, please consult the following manuals (look at
- * http://www.pcisig.com/ for how to get them):
- *
- * PCI BIOS Specification
- * PCI Local Bus Specification
- * PCI to PCI Bridge Specification
- * PCI System Design Guide
- *
- * For hypertransport information, please consult the following manuals
- * from http://www.hypertransport.org
- *
- * The Hypertransport I/O Link Specification
- */
-
-#ifndef LINUX_PCI_REGS_H
-#define LINUX_PCI_REGS_H
-
-/*
- * Under PCI, each device has 256 bytes of configuration address space,
- * of which the first 64 bytes are standardized as follows:
- */
-#define PCI_STD_HEADER_SIZEOF 64
-#define PCI_VENDOR_ID 0x00 /* 16 bits */
-#define PCI_DEVICE_ID 0x02 /* 16 bits */
-#define PCI_COMMAND 0x04 /* 16 bits */
-#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
-#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
-#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
-#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
-#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
-#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
-#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
-#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
-#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
-#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
-#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
-
-#define PCI_STATUS 0x06 /* 16 bits */
-#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
-#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
-#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
-#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
-#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
-#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
-#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
-#define PCI_STATUS_DEVSEL_FAST 0x000
-#define PCI_STATUS_DEVSEL_MEDIUM 0x200
-#define PCI_STATUS_DEVSEL_SLOW 0x400
-#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
-#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
-#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
-#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
-#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
-
-#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
-#define PCI_REVISION_ID 0x08 /* Revision ID */
-#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
-#define PCI_CLASS_DEVICE 0x0a /* Device class */
-
-#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
-#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
-#define PCI_HEADER_TYPE 0x0e /* 8 bits */
-#define PCI_HEADER_TYPE_NORMAL 0
-#define PCI_HEADER_TYPE_BRIDGE 1
-#define PCI_HEADER_TYPE_CARDBUS 2
-
-#define PCI_BIST 0x0f /* 8 bits */
-#define PCI_BIST_CODE_MASK 0x0f /* Return result */
-#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
-#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
-
-/*
- * Base addresses specify locations in memory or I/O space.
- * Decoded size can be determined by writing a value of
- * 0xffffffff to the register, and reading it back. Only
- * 1 bits are decoded.
- */
-#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
-#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
-#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
-#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
-#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
-#define PCI_BASE_ADDRESS_SPACE_IO 0x01
-#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
-#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
-#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
-#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
-#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
-#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
-#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
-#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
-/* bit 1 is reserved if address_space = 1 */
-
-/* Header type 0 (normal devices) */
-#define PCI_CARDBUS_CIS 0x28
-#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
-#define PCI_SUBSYSTEM_ID 0x2e
-#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
-#define PCI_ROM_ADDRESS_ENABLE 0x01
-#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
-
-#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
-
-/* 0x35-0x3b are reserved */
-#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
-#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
-#define PCI_MIN_GNT 0x3e /* 8 bits */
-#define PCI_MAX_LAT 0x3f /* 8 bits */
-
-/* Header type 1 (PCI-to-PCI bridges) */
-#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
-#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
-#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
-#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
-#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
-#define PCI_IO_LIMIT 0x1d
-#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */
-#define PCI_IO_RANGE_TYPE_16 0x00
-#define PCI_IO_RANGE_TYPE_32 0x01
-#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */
-#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */
-#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
-#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
-#define PCI_MEMORY_LIMIT 0x22
-#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
-#define PCI_MEMORY_RANGE_MASK (~0x0fUL)
-#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
-#define PCI_PREF_MEMORY_LIMIT 0x26
-#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL
-#define PCI_PREF_RANGE_TYPE_32 0x00
-#define PCI_PREF_RANGE_TYPE_64 0x01
-#define PCI_PREF_RANGE_MASK (~0x0fUL)
-#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
-#define PCI_PREF_LIMIT_UPPER32 0x2c
-#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
-#define PCI_IO_LIMIT_UPPER16 0x32
-/* 0x34 same as for htype 0 */
-/* 0x35-0x3b is reserved */
-#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_BRIDGE_CONTROL 0x3e
-#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
-#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
-#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */
-#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
-#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
-#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
-#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
-
-/* Header type 2 (CardBus bridges) */
-#define PCI_CB_CAPABILITY_LIST 0x14
-/* 0x15 reserved */
-#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
-#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
-#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
-#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
-#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
-#define PCI_CB_MEMORY_BASE_0 0x1c
-#define PCI_CB_MEMORY_LIMIT_0 0x20
-#define PCI_CB_MEMORY_BASE_1 0x24
-#define PCI_CB_MEMORY_LIMIT_1 0x28
-#define PCI_CB_IO_BASE_0 0x2c
-#define PCI_CB_IO_BASE_0_HI 0x2e
-#define PCI_CB_IO_LIMIT_0 0x30
-#define PCI_CB_IO_LIMIT_0_HI 0x32
-#define PCI_CB_IO_BASE_1 0x34
-#define PCI_CB_IO_BASE_1_HI 0x36
-#define PCI_CB_IO_LIMIT_1 0x38
-#define PCI_CB_IO_LIMIT_1_HI 0x3a
-#define PCI_CB_IO_RANGE_MASK (~0x03UL)
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_CB_BRIDGE_CONTROL 0x3e
-#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
-#define PCI_CB_BRIDGE_CTL_SERR 0x02
-#define PCI_CB_BRIDGE_CTL_ISA 0x04
-#define PCI_CB_BRIDGE_CTL_VGA 0x08
-#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
-#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
-#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
-#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
-#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
-#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
-#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
-#define PCI_CB_SUBSYSTEM_ID 0x42
-#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
-/* 0x48-0x7f reserved */
-
-/* Capability lists */
-
-#define PCI_CAP_LIST_ID 0 /* Capability ID */
-#define PCI_CAP_ID_PM 0x01 /* Power Management */
-#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
-#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
-#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
-#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
-#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
-#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
-#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
-#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
-#define PCI_CAP_ID_DBG 0x0A /* Debug port */
-#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
-#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
-#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
-#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
-#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */
-#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
-#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
-#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */
-#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
-#define PCI_CAP_ID_MAX PCI_CAP_ID_AF
-#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
-#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
-#define PCI_CAP_SIZEOF 4
-
-/* Power Management Registers */
-
-#define PCI_PM_PMC 2 /* PM Capabilities Register */
-#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
-#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
-#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */
-#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
-#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */
-#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
-#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
-#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
-#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */
-#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */
-#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */
-#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
-#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
-#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
-#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
-#define PCI_PM_CTRL 4 /* PM control and status register */
-#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
-#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */
-#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
-#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
-#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
-#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
-#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
-#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
-#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
-#define PCI_PM_DATA_REGISTER 7 /* (??) */
-#define PCI_PM_SIZEOF 8
-
-/* AGP registers */
-
-#define PCI_AGP_VERSION 2 /* BCD version number */
-#define PCI_AGP_RFU 3 /* Rest of capability flags */
-#define PCI_AGP_STATUS 4 /* Status register */
-#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
-#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
-#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
-#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
-#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
-#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
-#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
-#define PCI_AGP_COMMAND 8 /* Control register */
-#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
-#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
-#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
-#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
-#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
-#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
-#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
-#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
-#define PCI_AGP_SIZEOF 12
-
-/* Vital Product Data */
-
-#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */
-#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
-#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
-#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
-#define PCI_CAP_VPD_SIZEOF 8
-
-/* Slot Identification */
-
-#define PCI_SID_ESR 2 /* Expansion Slot Register */
-#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
-#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
-#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
-
-/* Message Signalled Interrupts registers */
-
-#define PCI_MSI_FLAGS 2 /* Various flags */
-#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
-#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
-#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
-#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
-#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */
-#define PCI_MSI_RFU 3 /* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
-#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
-#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
-#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
-#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
-
-/* MSI-X registers */
-#define PCI_MSIX_FLAGS 2
-#define PCI_MSIX_FLAGS_QSIZE 0x7FF
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
-#define PCI_MSIX_TABLE 4
-#define PCI_MSIX_PBA 8
-#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */
-
-/* MSI-X entry's format */
-#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_LOWER_ADDR 0
-#define PCI_MSIX_ENTRY_UPPER_ADDR 4
-#define PCI_MSIX_ENTRY_DATA 8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
-#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
-
-/* CompactPCI Hotswap Register */
-
-#define PCI_CHSWP_CSR 2 /* Control and Status Register */
-#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */
-#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */
-#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */
-#define PCI_CHSWP_LOO 0x08 /* LED On / Off */
-#define PCI_CHSWP_PI 0x30 /* Programming Interface */
-#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */
-#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */
-
-/* PCI Advanced Feature registers */
-
-#define PCI_AF_LENGTH 2
-#define PCI_AF_CAP 3
-#define PCI_AF_CAP_TP 0x01
-#define PCI_AF_CAP_FLR 0x02
-#define PCI_AF_CTRL 4
-#define PCI_AF_CTRL_FLR 0x01
-#define PCI_AF_STATUS 5
-#define PCI_AF_STATUS_TP 0x01
-#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */
-
-/* PCI-X registers */
-
-#define PCI_X_CMD 2 /* Modes & Features */
-#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
-#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
-#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */
-#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */
-#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */
-#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */
-#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */
- /* Max # of outstanding split transactions */
-#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */
-#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */
-#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */
-#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */
-#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */
-#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */
-#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
-#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
-#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
-#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
-#define PCI_X_STATUS 4 /* PCI-X capabilities */
-#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
-#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
-#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */
-#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */
-#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */
-#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */
-#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */
-#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */
-#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */
-#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */
-#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
-#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
-#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
-#define PCI_X_ECC_CSR 8 /* ECC control and status */
-#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */
-#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */
-#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */
-
-/* PCI Bridge Subsystem ID registers */
-
-#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
-
-/* PCI Express capability registers */
-
-#define PCI_EXP_FLAGS 2 /* Capabilities register */
-#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */
-#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
-#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */
-#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */
-#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
-#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
-#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
-#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
-#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
-#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
-#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
-#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
-#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
-#define PCI_EXP_DEVCAP 4 /* Device capabilities */
-#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
-#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
-#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
-#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
-#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
-#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
-#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
-#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
-#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
-#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
-#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
-#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
-#define PCI_EXP_DEVCTL 8 /* Device Control */
-#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
-#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
-#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
-#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
-#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
-#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
-#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
-#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
-#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
-#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
-#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
-#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
-#define PCI_EXP_DEVSTA 10 /* Device Status */
-#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
-#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
-#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
-#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
-#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
-#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
-#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
-#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
-#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
-#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
-#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
-#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
-#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
-#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
-#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
-#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
-#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
-#define PCI_EXP_LNKCTL 16 /* Link Control */
-#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
-#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
-#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
-#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
-#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
-#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
-#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
-#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
-#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
-#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
-#define PCI_EXP_LNKSTA 18 /* Link Status */
-#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
-#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
-#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
-#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
-#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
-#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
-#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
-#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
-#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */
-#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
-#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
-#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
-#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */
-#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */
-#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */
-#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */
-#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
-#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */
-#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */
-#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
-#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
-#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
-#define PCI_EXP_SLTCTL 24 /* Slot Control */
-#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
-#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
-#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */
-#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */
-#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
-#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
-#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
-#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
-#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */
-#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
-#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
-#define PCI_EXP_SLTSTA 26 /* Slot Status */
-#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
-#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
-#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */
-#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */
-#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */
-#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */
-#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */
-#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
-#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
-#define PCI_EXP_RTCTL 28 /* Root Control */
-#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
-#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
-#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
-#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
-#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
-#define PCI_EXP_RTCAP 30 /* Root Capabilities */
-#define PCI_EXP_RTSTA 32 /* Root Status */
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
-/*
- * Note that the following PCI Express 'Capability Structure' registers
- * were introduced with 'Capability Version' 0x2 (v2). These registers
- * do not exist on devices with Capability Version 1. Use pci_pcie_cap2()
- * to use these fields safely.
- */
-#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
-#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
-#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
-#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
-#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
-#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
-#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
-#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
-#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
-#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */
-#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */
-#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
-#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
-#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */
-#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
-#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
-#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
-#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
-
-/* Extended Capabilities (PCI-X 2.0 and Express) */
-#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
-#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
-#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
-
-#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */
-#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */
-#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */
-#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */
-#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */
-#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */
-#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */
-#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */
-#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */
-#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */
-#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */
-#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */
-#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */
-#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */
-#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */
-#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */
-#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */
-#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */
-#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */
-#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */
-#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */
-#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */
-#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */
-#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */
-#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */
-#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
-#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
-#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
-
-#define PCI_EXT_CAP_DSN_SIZEOF 12
-#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
-
-/* Advanced Error Reporting */
-#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
-#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
-#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
-#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
-#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
-#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
-#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
-#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */
-#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */
-#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */
-#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
-#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
-#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
-#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */
-#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */
-#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
-#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
-#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
-#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
- /* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
- /* Same bits as above */
-#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
-#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
-#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
-#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
-#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
-#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
-#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
-#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
-#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
- /* Same bits as above */
-#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
-#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */
-#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */
-#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */
-#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */
-#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
-#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
-#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
-/* Correctable Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001
-/* Non-fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002
-/* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004
-#define PCI_ERR_ROOT_STATUS 48
-#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
-/* Multi ERR_COR Received */
-#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
-#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
-#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
-#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
-#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
-
-/* Virtual Channel */
-#define PCI_VC_PORT_REG1 4
-#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */
-#define PCI_VC_PORT_REG2 8
-#define PCI_VC_REG2_32_PHASE 0x2
-#define PCI_VC_REG2_64_PHASE 0x4
-#define PCI_VC_REG2_128_PHASE 0x8
-#define PCI_VC_PORT_CTRL 12
-#define PCI_VC_PORT_STATUS 14
-#define PCI_VC_RES_CAP 16
-#define PCI_VC_RES_CTRL 20
-#define PCI_VC_RES_STATUS 26
-#define PCI_CAP_VC_BASE_SIZEOF 0x10
-#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
-
-/* Power Budgeting */
-#define PCI_PWR_DSR 4 /* Data Select Register */
-#define PCI_PWR_DATA 8 /* Data Register */
-#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */
-#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */
-#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */
-#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
-#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */
-#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
-#define PCI_PWR_CAP 12 /* Capability */
-#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
-#define PCI_EXT_CAP_PWR_SIZEOF 16
-
-/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
-#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */
-#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff)
-#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf)
-#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff)
-
-/*
- * Hypertransport sub capability types
- *
- * Unfortunately there are both 3 bit and 5 bit capability types defined
- * in the HT spec, catering for that is a little messy. You probably don't
- * want to use these directly, just use pci_find_ht_capability() and it
- * will do the right thing for you.
- */
-#define HT_3BIT_CAP_MASK 0xE0
-#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */
-#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */
-
-#define HT_5BIT_CAP_MASK 0xF8
-#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */
-#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */
-#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */
-#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */
-#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */
-#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */
-#define HT_MSI_FLAGS 0x02 /* Offset to flags */
-#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */
-#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */
-#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */
-#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */
-#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */
-#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */
-#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
-#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
-#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
-#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
-#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */
-#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */
-
-/* Alternative Routing-ID Interpretation */
-#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
-#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */
-#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */
-#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */
-#define PCI_ARI_CTRL 0x06 /* ARI Control Register */
-#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
-#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
-#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
-#define PCI_EXT_CAP_ARI_SIZEOF 8
-
-/* Address Translation Service */
-#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
-#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */
-#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */
-#define PCI_ATS_CTRL 0x06 /* ATS Control Register */
-#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
-#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
-#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
-#define PCI_EXT_CAP_ATS_SIZEOF 8
-
-/* Page Request Interface */
-#define PCI_PRI_CTRL 0x04 /* PRI control register */
-#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */
-#define PCI_PRI_CTRL_RESET 0x02 /* Reset */
-#define PCI_PRI_STATUS 0x06 /* PRI status register */
-#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */
-#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */
-#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */
-#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */
-#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
-#define PCI_EXT_CAP_PRI_SIZEOF 16
-
-/* PASID capability */
-#define PCI_PASID_CAP 0x04 /* PASID feature register */
-#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */
-#define PCI_PASID_CAP_PRIV 0x04 /* Priviledge Mode Supported */
-#define PCI_PASID_CTRL 0x06 /* PASID control register */
-#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */
-#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */
-#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */
-#define PCI_EXT_CAP_PASID_SIZEOF 8
-
-/* Single Root I/O Virtualization */
-#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
-#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */
-#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */
-#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */
-#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */
-#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */
-#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */
-#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */
-#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */
-#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */
-#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */
-#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */
-#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */
-#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */
-#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */
-#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */
-#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */
-#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */
-#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */
-#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */
-#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */
-#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */
-#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/
-#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */
-#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */
-#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */
-#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
-#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
-#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
-#define PCI_EXT_CAP_SRIOV_SIZEOF 64
-
-#define PCI_LTR_MAX_SNOOP_LAT 0x4
-#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
-#define PCI_LTR_VALUE_MASK 0x000003ff
-#define PCI_LTR_SCALE_MASK 0x00001c00
-#define PCI_LTR_SCALE_SHIFT 10
-#define PCI_EXT_CAP_LTR_SIZEOF 8
-
-/* Access Control Service */
-#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
-#define PCI_ACS_SV 0x01 /* Source Validation */
-#define PCI_ACS_TB 0x02 /* Translation Blocking */
-#define PCI_ACS_RR 0x04 /* P2P Request Redirect */
-#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */
-#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
-#define PCI_ACS_EC 0x20 /* P2P Egress Control */
-#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
-#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */
-#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
-#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
-
-#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */
-#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */
-
-/* sata capability */
-#define PCI_SATA_REGS 4 /* SATA REGs specifier */
-#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */
-#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */
-#define PCI_SATA_SIZEOF_SHORT 8
-#define PCI_SATA_SIZEOF_LONG 16
-
-/* resizable BARs */
-#define PCI_REBAR_CTRL 8 /* control register */
-#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */
-#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */
-
-/* dynamic power allocation */
-#define PCI_DPA_CAP 4 /* capability register */
-#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */
-#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */
-
-/* TPH Requester */
-#define PCI_TPH_CAP 4 /* capability register */
-#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */
-#define PCI_TPH_LOC_NONE 0x000 /* no location */
-#define PCI_TPH_LOC_CAP 0x200 /* in capability */
-#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
-#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
-#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
-#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
-
-#endif /* LINUX_PCI_REGS_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b4166cd..2e90235 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -14,606 +14,9 @@
#ifndef _LINUX_PERF_EVENT_H
#define _LINUX_PERF_EVENT_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/perf_event.h>
/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
- PERF_TYPE_HARDWARE = 0,
- PERF_TYPE_SOFTWARE = 1,
- PERF_TYPE_TRACEPOINT = 2,
- PERF_TYPE_HW_CACHE = 3,
- PERF_TYPE_RAW = 4,
- PERF_TYPE_BREAKPOINT = 5,
-
- PERF_TYPE_MAX, /* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
- /*
- * Common hardware events, generalized by the kernel:
- */
- PERF_COUNT_HW_CPU_CYCLES = 0,
- PERF_COUNT_HW_INSTRUCTIONS = 1,
- PERF_COUNT_HW_CACHE_REFERENCES = 2,
- PERF_COUNT_HW_CACHE_MISSES = 3,
- PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
- PERF_COUNT_HW_BRANCH_MISSES = 5,
- PERF_COUNT_HW_BUS_CYCLES = 6,
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7,
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8,
- PERF_COUNT_HW_REF_CPU_CYCLES = 9,
-
- PERF_COUNT_HW_MAX, /* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- * { read, write, prefetch } x
- * { accesses, misses }
- */
-enum perf_hw_cache_id {
- PERF_COUNT_HW_CACHE_L1D = 0,
- PERF_COUNT_HW_CACHE_L1I = 1,
- PERF_COUNT_HW_CACHE_LL = 2,
- PERF_COUNT_HW_CACHE_DTLB = 3,
- PERF_COUNT_HW_CACHE_ITLB = 4,
- PERF_COUNT_HW_CACHE_BPU = 5,
- PERF_COUNT_HW_CACHE_NODE = 6,
-
- PERF_COUNT_HW_CACHE_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
- PERF_COUNT_HW_CACHE_OP_READ = 0,
- PERF_COUNT_HW_CACHE_OP_WRITE = 1,
- PERF_COUNT_HW_CACHE_OP_PREFETCH = 2,
-
- PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
- PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0,
- PERF_COUNT_HW_CACHE_RESULT_MISS = 1,
-
- PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
- PERF_COUNT_SW_CPU_CLOCK = 0,
- PERF_COUNT_SW_TASK_CLOCK = 1,
- PERF_COUNT_SW_PAGE_FAULTS = 2,
- PERF_COUNT_SW_CONTEXT_SWITCHES = 3,
- PERF_COUNT_SW_CPU_MIGRATIONS = 4,
- PERF_COUNT_SW_PAGE_FAULTS_MIN = 5,
- PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
- PERF_COUNT_SW_ALIGNMENT_FAULTS = 7,
- PERF_COUNT_SW_EMULATION_FAULTS = 8,
-
- PERF_COUNT_SW_MAX, /* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
- PERF_SAMPLE_IP = 1U << 0,
- PERF_SAMPLE_TID = 1U << 1,
- PERF_SAMPLE_TIME = 1U << 2,
- PERF_SAMPLE_ADDR = 1U << 3,
- PERF_SAMPLE_READ = 1U << 4,
- PERF_SAMPLE_CALLCHAIN = 1U << 5,
- PERF_SAMPLE_ID = 1U << 6,
- PERF_SAMPLE_CPU = 1U << 7,
- PERF_SAMPLE_PERIOD = 1U << 8,
- PERF_SAMPLE_STREAM_ID = 1U << 9,
- PERF_SAMPLE_RAW = 1U << 10,
- PERF_SAMPLE_BRANCH_STACK = 1U << 11,
- PERF_SAMPLE_REGS_USER = 1U << 12,
- PERF_SAMPLE_STACK_USER = 1U << 13,
-
- PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
- PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */
- PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */
- PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */
-
- PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */
- PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */
- PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */
- PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */
-
- PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
- (PERF_SAMPLE_BRANCH_USER|\
- PERF_SAMPLE_BRANCH_KERNEL|\
- PERF_SAMPLE_BRANCH_HV)
-
-/*
- * Values to determine ABI of the registers dump.
- */
-enum perf_sample_regs_abi {
- PERF_SAMPLE_REGS_ABI_NONE = 0,
- PERF_SAMPLE_REGS_ABI_32 = 1,
- PERF_SAMPLE_REGS_ABI_64 = 2,
-};
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- * { u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- * { u64 id; } && PERF_FORMAT_ID
- * } && !PERF_FORMAT_GROUP
- *
- * { u64 nr;
- * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- * { u64 value;
- * { u64 id; } && PERF_FORMAT_ID
- * } cntr[nr];
- * } && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
- PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
- PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
- PERF_FORMAT_ID = 1U << 2,
- PERF_FORMAT_GROUP = 1U << 3,
-
- PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */
-#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */
-#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */
- /* add: sample_stack_user */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
- /*
- * Major type: hardware/software/tracepoint/etc.
- */
- __u32 type;
-
- /*
- * Size of the attr structure, for fwd/bwd compat.
- */
- __u32 size;
-
- /*
- * Type specific configuration information.
- */
- __u64 config;
-
- union {
- __u64 sample_period;
- __u64 sample_freq;
- };
-
- __u64 sample_type;
- __u64 read_format;
-
- __u64 disabled : 1, /* off by default */
- inherit : 1, /* children inherit it */
- pinned : 1, /* must always be on PMU */
- exclusive : 1, /* only group on PMU */
- exclude_user : 1, /* don't count user */
- exclude_kernel : 1, /* ditto kernel */
- exclude_hv : 1, /* ditto hypervisor */
- exclude_idle : 1, /* don't count when idle */
- mmap : 1, /* include mmap data */
- comm : 1, /* include comm data */
- freq : 1, /* use freq, not period */
- inherit_stat : 1, /* per task counts */
- enable_on_exec : 1, /* next exec enables */
- task : 1, /* trace fork/exit */
- watermark : 1, /* wakeup_watermark */
- /*
- * precise_ip:
- *
- * 0 - SAMPLE_IP can have arbitrary skid
- * 1 - SAMPLE_IP must have constant skid
- * 2 - SAMPLE_IP requested to have 0 skid
- * 3 - SAMPLE_IP must have 0 skid
- *
- * See also PERF_RECORD_MISC_EXACT_IP
- */
- precise_ip : 2, /* skid constraint */
- mmap_data : 1, /* non-exec mmap data */
- sample_id_all : 1, /* sample_type all events */
-
- exclude_host : 1, /* don't count in host */
- exclude_guest : 1, /* don't count in guest */
-
- exclude_callchain_kernel : 1, /* exclude kernel callchains */
- exclude_callchain_user : 1, /* exclude user callchains */
-
- __reserved_1 : 41;
-
- union {
- __u32 wakeup_events; /* wakeup every n events */
- __u32 wakeup_watermark; /* bytes before wakeup */
- };
-
- __u32 bp_type;
- union {
- __u64 bp_addr;
- __u64 config1; /* extension of config */
- };
- union {
- __u64 bp_len;
- __u64 config2; /* extension of config1 */
- };
- __u64 branch_sample_type; /* enum perf_branch_sample_type */
-
- /*
- * Defines set of user regs to dump on samples.
- * See asm/perf_regs.h for details.
- */
- __u64 sample_regs_user;
-
- /*
- * Defines size of the user stack to dump on samples.
- */
- __u32 sample_stack_user;
-
- /* Align to u64. */
- __u32 __reserved_2;
-};
-
-#define perf_flags(attr) (*(&(attr)->read_format + 1))
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE _IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE _IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH _IO ('$', 2)
-#define PERF_EVENT_IOC_RESET _IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
- PERF_IOC_FLAG_GROUP = 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
- __u32 version; /* version number of this structure */
- __u32 compat_version; /* lowest version this is compat with */
-
- /*
- * Bits needed to read the hw events in user-space.
- *
- * u32 seq, time_mult, time_shift, idx, width;
- * u64 count, enabled, running;
- * u64 cyc, time_offset;
- * s64 pmc = 0;
- *
- * do {
- * seq = pc->lock;
- * barrier()
- *
- * enabled = pc->time_enabled;
- * running = pc->time_running;
- *
- * if (pc->cap_usr_time && enabled != running) {
- * cyc = rdtsc();
- * time_offset = pc->time_offset;
- * time_mult = pc->time_mult;
- * time_shift = pc->time_shift;
- * }
- *
- * idx = pc->index;
- * count = pc->offset;
- * if (pc->cap_usr_rdpmc && idx) {
- * width = pc->pmc_width;
- * pmc = rdpmc(idx - 1);
- * }
- *
- * barrier();
- * } while (pc->lock != seq);
- *
- * NOTE: for obvious reason this only works on self-monitoring
- * processes.
- */
- __u32 lock; /* seqlock for synchronization */
- __u32 index; /* hardware event identifier */
- __s64 offset; /* add to hardware event value */
- __u64 time_enabled; /* time event active */
- __u64 time_running; /* time event on cpu */
- union {
- __u64 capabilities;
- __u64 cap_usr_time : 1,
- cap_usr_rdpmc : 1,
- cap_____res : 62;
- };
-
- /*
- * If cap_usr_rdpmc this field provides the bit-width of the value
- * read using the rdpmc() or equivalent instruction. This can be used
- * to sign extend the result like:
- *
- * pmc <<= 64 - width;
- * pmc >>= 64 - width; // signed shift right
- * count += pmc;
- */
- __u16 pmc_width;
-
- /*
- * If cap_usr_time the below fields can be used to compute the time
- * delta since time_enabled (in ns) using rdtsc or similar.
- *
- * u64 quot, rem;
- * u64 delta;
- *
- * quot = (cyc >> time_shift);
- * rem = cyc & ((1 << time_shift) - 1);
- * delta = time_offset + quot * time_mult +
- * ((rem * time_mult) >> time_shift);
- *
- * Where time_offset,time_mult,time_shift and cyc are read in the
- * seqcount loop described above. This delta can then be added to
- * enabled and possible running (if idx), improving the scaling:
- *
- * enabled += delta;
- * if (idx)
- * running += delta;
- *
- * quot = count / running;
- * rem = count % running;
- * count = quot * enabled + (rem * enabled) / running;
- */
- __u16 time_shift;
- __u32 time_mult;
- __u64 time_offset;
-
- /*
- * Hole for extension of the self monitor capabilities
- */
-
- __u64 __reserved[120]; /* align to 1k */
-
- /*
- * Control data for the mmap() data buffer.
- *
- * User-space reading the @data_head value should issue an rmb(), on
- * SMP capable platforms, after reading this value -- see
- * perf_event_wakeup().
- *
- * When the mapping is PROT_WRITE the @data_tail value should be
- * written by userspace to reflect the last read data. In this case
- * the kernel will not over-write unread data.
- */
- __u64 data_head; /* head in the data section */
- __u64 data_tail; /* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0)
-#define PERF_RECORD_MISC_KERNEL (1 << 0)
-#define PERF_RECORD_MISC_USER (2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR (3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER (5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP (1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15)
-
-struct perf_event_header {
- __u32 type;
- __u16 misc;
- __u16 size;
-};
-
-enum perf_event_type {
-
- /*
- * If perf_event_attr.sample_id_all is set then all event types will
- * have the sample_type selected fields related to where/when
- * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
- * described in PERF_RECORD_SAMPLE below, it will be stashed just after
- * the perf_event_header and the fields already present for the existing
- * fields, i.e. at the end of the payload. That way a newer perf.data
- * file will be supported by older perf tools, with these new optional
- * fields being ignored.
- *
- * The MMAP events record the PROT_EXEC mappings so that we can
- * correlate userspace IPs to code. They have the following structure:
- *
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * u64 addr;
- * u64 len;
- * u64 pgoff;
- * char filename[];
- * };
- */
- PERF_RECORD_MMAP = 1,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 id;
- * u64 lost;
- * };
- */
- PERF_RECORD_LOST = 2,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * char comm[];
- * };
- */
- PERF_RECORD_COMM = 3,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_RECORD_EXIT = 4,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 time;
- * u64 id;
- * u64 stream_id;
- * };
- */
- PERF_RECORD_THROTTLE = 5,
- PERF_RECORD_UNTHROTTLE = 6,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_RECORD_FORK = 7,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, tid;
- *
- * struct read_format values;
- * };
- */
- PERF_RECORD_READ = 8,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * { u64 ip; } && PERF_SAMPLE_IP
- * { u32 pid, tid; } && PERF_SAMPLE_TID
- * { u64 time; } && PERF_SAMPLE_TIME
- * { u64 addr; } && PERF_SAMPLE_ADDR
- * { u64 id; } && PERF_SAMPLE_ID
- * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
- * { u32 cpu, res; } && PERF_SAMPLE_CPU
- * { u64 period; } && PERF_SAMPLE_PERIOD
- *
- * { struct read_format values; } && PERF_SAMPLE_READ
- *
- * { u64 nr,
- * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
- *
- * #
- * # The RAW record below is opaque data wrt the ABI
- * #
- * # That is, the ABI doesn't make any promises wrt to
- * # the stability of its content, it may vary depending
- * # on event, hardware, kernel version and phase of
- * # the moon.
- * #
- * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
- * #
- *
- * { u32 size;
- * char data[size];}&& PERF_SAMPLE_RAW
- *
- * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
- *
- * { u64 abi; # enum perf_sample_regs_abi
- * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
- *
- * { u64 size;
- * char data[size];
- * u64 dyn_size; } && PERF_SAMPLE_STACK_USER
- * };
- */
- PERF_RECORD_SAMPLE = 9,
-
- PERF_RECORD_MAX, /* non-ABI */
-};
-
-#define PERF_MAX_STACK_DEPTH 127
-
-enum perf_callchain_context {
- PERF_CONTEXT_HV = (__u64)-32,
- PERF_CONTEXT_KERNEL = (__u64)-128,
- PERF_CONTEXT_USER = (__u64)-512,
-
- PERF_CONTEXT_GUEST = (__u64)-2048,
- PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176,
- PERF_CONTEXT_GUEST_USER = (__u64)-2560,
-
- PERF_CONTEXT_MAX = (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP (1U << 0)
-#define PERF_FLAG_FD_OUTPUT (1U << 1)
-#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */
-
-#ifdef __KERNEL__
-/*
* Kernel-internal data types and definitions:
*/
@@ -1422,5 +825,4 @@ _name##_show(struct device *dev, \
\
static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
-#endif /* __KERNEL__ */
#endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 8fc7dd1a..646c0a7 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -1,7 +1,8 @@
#ifndef _LINUX_PERSONALITY_H
#define _LINUX_PERSONALITY_H
-#ifdef __KERNEL__
+#include <uapi/linux/personality.h>
+
/*
* Handling of different ABIs (personalities).
@@ -14,72 +15,6 @@ extern int register_exec_domain(struct exec_domain *);
extern int unregister_exec_domain(struct exec_domain *);
extern int __set_personality(unsigned int);
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
- UNAME26 = 0x0020000,
- ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */
- FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors
- * (signal handling)
- */
- MMAP_PAGE_ZERO = 0x0100000,
- ADDR_COMPAT_LAYOUT = 0x0200000,
- READ_IMPLIES_EXEC = 0x0400000,
- ADDR_LIMIT_32BIT = 0x0800000,
- SHORT_INODE = 0x1000000,
- WHOLE_SECONDS = 0x2000000,
- STICKY_TIMEOUTS = 0x4000000,
- ADDR_LIMIT_3GB = 0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \
- ADDR_NO_RANDOMIZE | \
- ADDR_COMPAT_LAYOUT | \
- MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte. Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
- PER_LINUX = 0x0000,
- PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT,
- PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS,
- PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
- PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS |
- WHOLE_SECONDS | SHORT_INODE,
- PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
- PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS,
- PER_BSD = 0x0006,
- PER_SUNOS = 0x0006 | STICKY_TIMEOUTS,
- PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_LINUX32 = 0x0008,
- PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB,
- PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
- PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
- PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
- PER_RISCOS = 0x000c,
- PER_SOLARIS = 0x000d | STICKY_TIMEOUTS,
- PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
- PER_OSF4 = 0x000f, /* OSF/1 v4 */
- PER_HPUX = 0x0010,
- PER_MASK = 0x00ff,
-};
-
-#ifdef __KERNEL__
/*
* Description of an execution domain.
@@ -116,6 +51,4 @@ struct exec_domain {
#define set_personality(pers) \
((current->personality == (pers)) ? 0 : __set_personality(pers))
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
deleted file mode 100644
index 0b80c80..0000000
--- a/include/linux/pfkeyv2.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/* PF_KEY user interface, this is defined by rfc2367 so
- * do not make arbitrary modifications or else this header
- * file will not be compliant.
- */
-
-#ifndef _LINUX_PFKEY2_H
-#define _LINUX_PFKEY2_H
-
-#include <linux/types.h>
-
-#define PF_KEY_V2 2
-#define PFKEYV2_REVISION 199806L
-
-struct sadb_msg {
- __u8 sadb_msg_version;
- __u8 sadb_msg_type;
- __u8 sadb_msg_errno;
- __u8 sadb_msg_satype;
- __u16 sadb_msg_len;
- __u16 sadb_msg_reserved;
- __u32 sadb_msg_seq;
- __u32 sadb_msg_pid;
-} __attribute__((packed));
-/* sizeof(struct sadb_msg) == 16 */
-
-struct sadb_ext {
- __u16 sadb_ext_len;
- __u16 sadb_ext_type;
-} __attribute__((packed));
-/* sizeof(struct sadb_ext) == 4 */
-
-struct sadb_sa {
- __u16 sadb_sa_len;
- __u16 sadb_sa_exttype;
- __be32 sadb_sa_spi;
- __u8 sadb_sa_replay;
- __u8 sadb_sa_state;
- __u8 sadb_sa_auth;
- __u8 sadb_sa_encrypt;
- __u32 sadb_sa_flags;
-} __attribute__((packed));
-/* sizeof(struct sadb_sa) == 16 */
-
-struct sadb_lifetime {
- __u16 sadb_lifetime_len;
- __u16 sadb_lifetime_exttype;
- __u32 sadb_lifetime_allocations;
- __u64 sadb_lifetime_bytes;
- __u64 sadb_lifetime_addtime;
- __u64 sadb_lifetime_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_lifetime) == 32 */
-
-struct sadb_address {
- __u16 sadb_address_len;
- __u16 sadb_address_exttype;
- __u8 sadb_address_proto;
- __u8 sadb_address_prefixlen;
- __u16 sadb_address_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_address) == 8 */
-
-struct sadb_key {
- __u16 sadb_key_len;
- __u16 sadb_key_exttype;
- __u16 sadb_key_bits;
- __u16 sadb_key_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_key) == 8 */
-
-struct sadb_ident {
- __u16 sadb_ident_len;
- __u16 sadb_ident_exttype;
- __u16 sadb_ident_type;
- __u16 sadb_ident_reserved;
- __u64 sadb_ident_id;
-} __attribute__((packed));
-/* sizeof(struct sadb_ident) == 16 */
-
-struct sadb_sens {
- __u16 sadb_sens_len;
- __u16 sadb_sens_exttype;
- __u32 sadb_sens_dpd;
- __u8 sadb_sens_sens_level;
- __u8 sadb_sens_sens_len;
- __u8 sadb_sens_integ_level;
- __u8 sadb_sens_integ_len;
- __u32 sadb_sens_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_sens) == 16 */
-
-/* followed by:
- __u64 sadb_sens_bitmap[sens_len];
- __u64 sadb_integ_bitmap[integ_len]; */
-
-struct sadb_prop {
- __u16 sadb_prop_len;
- __u16 sadb_prop_exttype;
- __u8 sadb_prop_replay;
- __u8 sadb_prop_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_prop) == 8 */
-
-/* followed by:
- struct sadb_comb sadb_combs[(sadb_prop_len +
- sizeof(__u64) - sizeof(struct sadb_prop)) /
- sizeof(struct sadb_comb)]; */
-
-struct sadb_comb {
- __u8 sadb_comb_auth;
- __u8 sadb_comb_encrypt;
- __u16 sadb_comb_flags;
- __u16 sadb_comb_auth_minbits;
- __u16 sadb_comb_auth_maxbits;
- __u16 sadb_comb_encrypt_minbits;
- __u16 sadb_comb_encrypt_maxbits;
- __u32 sadb_comb_reserved;
- __u32 sadb_comb_soft_allocations;
- __u32 sadb_comb_hard_allocations;
- __u64 sadb_comb_soft_bytes;
- __u64 sadb_comb_hard_bytes;
- __u64 sadb_comb_soft_addtime;
- __u64 sadb_comb_hard_addtime;
- __u64 sadb_comb_soft_usetime;
- __u64 sadb_comb_hard_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_comb) == 72 */
-
-struct sadb_supported {
- __u16 sadb_supported_len;
- __u16 sadb_supported_exttype;
- __u32 sadb_supported_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_supported) == 8 */
-
-/* followed by:
- struct sadb_alg sadb_algs[(sadb_supported_len +
- sizeof(__u64) - sizeof(struct sadb_supported)) /
- sizeof(struct sadb_alg)]; */
-
-struct sadb_alg {
- __u8 sadb_alg_id;
- __u8 sadb_alg_ivlen;
- __u16 sadb_alg_minbits;
- __u16 sadb_alg_maxbits;
- __u16 sadb_alg_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_alg) == 8 */
-
-struct sadb_spirange {
- __u16 sadb_spirange_len;
- __u16 sadb_spirange_exttype;
- __u32 sadb_spirange_min;
- __u32 sadb_spirange_max;
- __u32 sadb_spirange_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_spirange) == 16 */
-
-struct sadb_x_kmprivate {
- __u16 sadb_x_kmprivate_len;
- __u16 sadb_x_kmprivate_exttype;
- __u32 sadb_x_kmprivate_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmprivate) == 8 */
-
-struct sadb_x_sa2 {
- __u16 sadb_x_sa2_len;
- __u16 sadb_x_sa2_exttype;
- __u8 sadb_x_sa2_mode;
- __u8 sadb_x_sa2_reserved1;
- __u16 sadb_x_sa2_reserved2;
- __u32 sadb_x_sa2_sequence;
- __u32 sadb_x_sa2_reqid;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_sa2) == 16 */
-
-struct sadb_x_policy {
- __u16 sadb_x_policy_len;
- __u16 sadb_x_policy_exttype;
- __u16 sadb_x_policy_type;
- __u8 sadb_x_policy_dir;
- __u8 sadb_x_policy_reserved;
- __u32 sadb_x_policy_id;
- __u32 sadb_x_policy_priority;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_policy) == 16 */
-
-struct sadb_x_ipsecrequest {
- __u16 sadb_x_ipsecrequest_len;
- __u16 sadb_x_ipsecrequest_proto;
- __u8 sadb_x_ipsecrequest_mode;
- __u8 sadb_x_ipsecrequest_level;
- __u16 sadb_x_ipsecrequest_reserved1;
- __u32 sadb_x_ipsecrequest_reqid;
- __u32 sadb_x_ipsecrequest_reserved2;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_ipsecrequest) == 16 */
-
-/* This defines the TYPE of Nat Traversal in use. Currently only one
- * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
- */
-struct sadb_x_nat_t_type {
- __u16 sadb_x_nat_t_type_len;
- __u16 sadb_x_nat_t_type_exttype;
- __u8 sadb_x_nat_t_type_type;
- __u8 sadb_x_nat_t_type_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_type) == 8 */
-
-/* Pass a NAT Traversal port (Source or Dest port) */
-struct sadb_x_nat_t_port {
- __u16 sadb_x_nat_t_port_len;
- __u16 sadb_x_nat_t_port_exttype;
- __be16 sadb_x_nat_t_port_port;
- __u16 sadb_x_nat_t_port_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_port) == 8 */
-
-/* Generic LSM security context */
-struct sadb_x_sec_ctx {
- __u16 sadb_x_sec_len;
- __u16 sadb_x_sec_exttype;
- __u8 sadb_x_ctx_alg; /* LSMs: e.g., selinux == 1 */
- __u8 sadb_x_ctx_doi;
- __u16 sadb_x_ctx_len;
-} __attribute__((packed));
-/* sizeof(struct sadb_sec_ctx) = 8 */
-
-/* Used by MIGRATE to pass addresses IKE will use to perform
- * negotiation with the peer */
-struct sadb_x_kmaddress {
- __u16 sadb_x_kmaddress_len;
- __u16 sadb_x_kmaddress_exttype;
- __u32 sadb_x_kmaddress_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmaddress) == 8 */
-
-/* Message types */
-#define SADB_RESERVED 0
-#define SADB_GETSPI 1
-#define SADB_UPDATE 2
-#define SADB_ADD 3
-#define SADB_DELETE 4
-#define SADB_GET 5
-#define SADB_ACQUIRE 6
-#define SADB_REGISTER 7
-#define SADB_EXPIRE 8
-#define SADB_FLUSH 9
-#define SADB_DUMP 10
-#define SADB_X_PROMISC 11
-#define SADB_X_PCHANGE 12
-#define SADB_X_SPDUPDATE 13
-#define SADB_X_SPDADD 14
-#define SADB_X_SPDDELETE 15
-#define SADB_X_SPDGET 16
-#define SADB_X_SPDACQUIRE 17
-#define SADB_X_SPDDUMP 18
-#define SADB_X_SPDFLUSH 19
-#define SADB_X_SPDSETIDX 20
-#define SADB_X_SPDEXPIRE 21
-#define SADB_X_SPDDELETE2 22
-#define SADB_X_NAT_T_NEW_MAPPING 23
-#define SADB_X_MIGRATE 24
-#define SADB_MAX 24
-
-/* Security Association flags */
-#define SADB_SAFLAGS_PFS 1
-#define SADB_SAFLAGS_NOPMTUDISC 0x20000000
-#define SADB_SAFLAGS_DECAP_DSCP 0x40000000
-#define SADB_SAFLAGS_NOECN 0x80000000
-
-/* Security Association states */
-#define SADB_SASTATE_LARVAL 0
-#define SADB_SASTATE_MATURE 1
-#define SADB_SASTATE_DYING 2
-#define SADB_SASTATE_DEAD 3
-#define SADB_SASTATE_MAX 3
-
-/* Security Association types */
-#define SADB_SATYPE_UNSPEC 0
-#define SADB_SATYPE_AH 2
-#define SADB_SATYPE_ESP 3
-#define SADB_SATYPE_RSVP 5
-#define SADB_SATYPE_OSPFV2 6
-#define SADB_SATYPE_RIPV2 7
-#define SADB_SATYPE_MIP 8
-#define SADB_X_SATYPE_IPCOMP 9
-#define SADB_SATYPE_MAX 9
-
-/* Authentication algorithms */
-#define SADB_AALG_NONE 0
-#define SADB_AALG_MD5HMAC 2
-#define SADB_AALG_SHA1HMAC 3
-#define SADB_X_AALG_SHA2_256HMAC 5
-#define SADB_X_AALG_SHA2_384HMAC 6
-#define SADB_X_AALG_SHA2_512HMAC 7
-#define SADB_X_AALG_RIPEMD160HMAC 8
-#define SADB_X_AALG_AES_XCBC_MAC 9
-#define SADB_X_AALG_NULL 251 /* kame */
-#define SADB_AALG_MAX 251
-
-/* Encryption algorithms */
-#define SADB_EALG_NONE 0
-#define SADB_EALG_DESCBC 2
-#define SADB_EALG_3DESCBC 3
-#define SADB_X_EALG_CASTCBC 6
-#define SADB_X_EALG_BLOWFISHCBC 7
-#define SADB_EALG_NULL 11
-#define SADB_X_EALG_AESCBC 12
-#define SADB_X_EALG_AESCTR 13
-#define SADB_X_EALG_AES_CCM_ICV8 14
-#define SADB_X_EALG_AES_CCM_ICV12 15
-#define SADB_X_EALG_AES_CCM_ICV16 16
-#define SADB_X_EALG_AES_GCM_ICV8 18
-#define SADB_X_EALG_AES_GCM_ICV12 19
-#define SADB_X_EALG_AES_GCM_ICV16 20
-#define SADB_X_EALG_CAMELLIACBC 22
-#define SADB_X_EALG_NULL_AES_GMAC 23
-#define SADB_EALG_MAX 253 /* last EALG */
-/* private allocations should use 249-255 (RFC2407) */
-#define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-#define SADB_X_EALG_TWOFISHCBC 253 /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-
-/* Compression algorithms */
-#define SADB_X_CALG_NONE 0
-#define SADB_X_CALG_OUI 1
-#define SADB_X_CALG_DEFLATE 2
-#define SADB_X_CALG_LZS 3
-#define SADB_X_CALG_LZJH 4
-#define SADB_X_CALG_MAX 4
-
-/* Extension Header values */
-#define SADB_EXT_RESERVED 0
-#define SADB_EXT_SA 1
-#define SADB_EXT_LIFETIME_CURRENT 2
-#define SADB_EXT_LIFETIME_HARD 3
-#define SADB_EXT_LIFETIME_SOFT 4
-#define SADB_EXT_ADDRESS_SRC 5
-#define SADB_EXT_ADDRESS_DST 6
-#define SADB_EXT_ADDRESS_PROXY 7
-#define SADB_EXT_KEY_AUTH 8
-#define SADB_EXT_KEY_ENCRYPT 9
-#define SADB_EXT_IDENTITY_SRC 10
-#define SADB_EXT_IDENTITY_DST 11
-#define SADB_EXT_SENSITIVITY 12
-#define SADB_EXT_PROPOSAL 13
-#define SADB_EXT_SUPPORTED_AUTH 14
-#define SADB_EXT_SUPPORTED_ENCRYPT 15
-#define SADB_EXT_SPIRANGE 16
-#define SADB_X_EXT_KMPRIVATE 17
-#define SADB_X_EXT_POLICY 18
-#define SADB_X_EXT_SA2 19
-/* The next four entries are for setting up NAT Traversal */
-#define SADB_X_EXT_NAT_T_TYPE 20
-#define SADB_X_EXT_NAT_T_SPORT 21
-#define SADB_X_EXT_NAT_T_DPORT 22
-#define SADB_X_EXT_NAT_T_OA 23
-#define SADB_X_EXT_SEC_CTX 24
-/* Used with MIGRATE to pass @ to IKE for negotiation */
-#define SADB_X_EXT_KMADDRESS 25
-#define SADB_EXT_MAX 25
-
-/* Identity Extension values */
-#define SADB_IDENTTYPE_RESERVED 0
-#define SADB_IDENTTYPE_PREFIX 1
-#define SADB_IDENTTYPE_FQDN 2
-#define SADB_IDENTTYPE_USERFQDN 3
-#define SADB_IDENTTYPE_MAX 3
-
-#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/include/linux/pg.h b/include/linux/pg.h
deleted file mode 100644
index db994bb..0000000
--- a/include/linux/pg.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* pg.h (c) 1998 Grant R. Guenther <grant@torque.net>
- Under the terms of the GNU General Public License
-
-
- pg.h defines the user interface to the generic ATAPI packet
- command driver for parallel port ATAPI devices (pg). The
- driver is loosely modelled after the generic SCSI driver, sg,
- although the actual interface is different.
-
- The pg driver provides a simple character device interface for
- sending ATAPI commands to a device. With the exception of the
- ATAPI reset operation, all operations are performed by a pair
- of read and write operations to the appropriate /dev/pgN device.
- A write operation delivers a command and any outbound data in
- a single buffer. Normally, the write will succeed unless the
- device is offline or malfunctioning, or there is already another
- command pending. If the write succeeds, it should be followed
- immediately by a read operation, to obtain any returned data and
- status information. A read will fail if there is no operation
- in progress.
-
- As a special case, the device can be reset with a write operation,
- and in this case, no following read is expected, or permitted.
-
- There are no ioctl() operations. Any single operation
- may transfer at most PG_MAX_DATA bytes. Note that the driver must
- copy the data through an internal buffer. In keeping with all
- current ATAPI devices, command packets are assumed to be exactly
- 12 bytes in length.
-
- To permit future changes to this interface, the headers in the
- read and write buffers contain a single character "magic" flag.
- Currently this flag must be the character "P".
-
-*/
-
-#define PG_MAGIC 'P'
-#define PG_RESET 'Z'
-#define PG_COMMAND 'C'
-
-#define PG_MAX_DATA 32768
-
-struct pg_write_hdr {
-
- char magic; /* == PG_MAGIC */
- char func; /* PG_RESET or PG_COMMAND */
- int dlen; /* number of bytes expected to transfer */
- int timeout; /* number of seconds before timeout */
- char packet[12]; /* packet command */
-
-};
-
-struct pg_read_hdr {
-
- char magic; /* == PG_MAGIC */
- char scsi; /* "scsi" status == sense key */
- int dlen; /* size of device transfer request */
- int duration; /* time in seconds command took */
- char pad[12]; /* not used */
-
-};
-
-/* end of pg.h */
diff --git a/include/linux/phantom.h b/include/linux/phantom.h
deleted file mode 100644
index 94dd664..0000000
--- a/include/linux/phantom.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __PHANTOM_H
-#define __PHANTOM_H
-
-#include <linux/types.h>
-
-/* PHN_(G/S)ET_REG param */
-struct phm_reg {
- __u32 reg;
- __u32 value;
-};
-
-/* PHN_(G/S)ET_REGS param */
-struct phm_regs {
- __u32 count;
- __u32 mask;
- __u32 values[8];
-};
-
-#define PH_IOC_MAGIC 'p'
-#define PHN_GET_REG _IOWR(PH_IOC_MAGIC, 0, struct phm_reg *)
-#define PHN_SET_REG _IOW(PH_IOC_MAGIC, 1, struct phm_reg *)
-#define PHN_GET_REGS _IOWR(PH_IOC_MAGIC, 2, struct phm_regs *)
-#define PHN_SET_REGS _IOW(PH_IOC_MAGIC, 3, struct phm_regs *)
-/* this ioctl tells the driver, that the caller is not OpenHaptics and might
- * use improved registers update (no more phantom switchoffs when using
- * libphantom) */
-#define PHN_NOT_OH _IO(PH_IOC_MAGIC, 4)
-#define PHN_GETREG _IOWR(PH_IOC_MAGIC, 5, struct phm_reg)
-#define PHN_SETREG _IOW(PH_IOC_MAGIC, 6, struct phm_reg)
-#define PHN_GETREGS _IOWR(PH_IOC_MAGIC, 7, struct phm_regs)
-#define PHN_SETREGS _IOW(PH_IOC_MAGIC, 8, struct phm_regs)
-
-#define PHN_CONTROL 0x6 /* control byte in iaddr space */
-#define PHN_CTL_AMP 0x1 /* switch after torques change */
-#define PHN_CTL_BUT 0x2 /* is button switched */
-#define PHN_CTL_IRQ 0x10 /* is irq enabled */
-
-#define PHN_ZERO_FORCE 2048 /* zero torque on motor */
-
-#endif
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f48bfc8..f691b04 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -19,169 +19,11 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
-
#ifndef LINUX_PHONET_H
#define LINUX_PHONET_H
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT 0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET 1
-/* Phonet pipe */
-#define PN_PROTO_PIPE 2
-#define PHONET_NPROTO 3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP 1
-#define PNPIPE_IFINDEX 2
-#define PNPIPE_HANDLE 3
-#define PNPIPE_INITSTATE 4
-
-#define PNADDR_ANY 0
-#define PNADDR_BROADCAST 0xFC
-#define PNPORT_RESOURCE_ROUTING 0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE 0
-#define PNPIPE_ENCAP_IP 1
-
-/* ioctls */
-#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
- __u8 pn_rdev;
- __u8 pn_sdev;
- __u8 pn_res;
- __be16 pn_length;
- __u8 pn_robj;
- __u8 pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
- __u8 pn_trans_id; /* transaction ID */
- __u8 pn_msg_id; /* message type */
- union {
- struct {
- __u8 pn_submsg_id; /* message subtype */
- __u8 pn_data[5];
- } base;
- struct {
- __u16 pn_e_res_id; /* extended resource ID */
- __u8 pn_e_submsg_id; /* message subtype */
- __u8 pn_e_data[3];
- } ext;
- } pn_msg_u;
-};
-#define PN_COMMON_MESSAGE 0xF0
-#define PN_COMMGR 0x10
-#define PN_PREFIX 0xE0 /* resource for extended messages */
-#define pn_submsg_id pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id pn_msg_u.ext.pn_e_res_id
-#define pn_data pn_msg_u.base.pn_data
-#define pn_e_data pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14
-#define pn_orig_msg_id pn_data[0]
-#define pn_status pn_data[1]
-#define pn_e_orig_msg_id pn_e_data[0]
-#define pn_e_status pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
- __kernel_sa_family_t spn_family;
- __u8 spn_obj;
- __u8 spn_dev;
- __u8 spn_resource;
- __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC 0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
- return (addr << 8) | (port & 0x3ff);
-}
+#include <uapi/linux/phonet.h>
-static inline __u8 pn_obj(__u16 handle)
-{
- return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
- return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
- return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
- return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
- spn->spn_dev &= 0x03;
- spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
- spn->spn_dev &= 0xfc;
- spn->spn_dev |= (port >> 8) & 0x03;
- spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
- __u16 handle)
-{
- spn->spn_dev = pn_dev(handle);
- spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
- __u8 resource)
-{
- spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
- return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
- return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
- return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
- return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
#define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0)
struct if_phonet_autoconf {
@@ -195,6 +37,4 @@ struct if_phonet_req {
} ifr_ifru;
};
#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
deleted file mode 100644
index 082eafa..0000000
--- a/include/linux/pkt_cls.h
+++ /dev/null
@@ -1,469 +0,0 @@
-#ifndef __LINUX_PKT_CLS_H
-#define __LINUX_PKT_CLS_H
-
-#include <linux/types.h>
-#include <linux/pkt_sched.h>
-
-/* I think i could have done better macros ; for now this is stolen from
- * some arch/mips code - jhs
-*/
-#define _TC_MAKE32(x) ((x))
-
-#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
-#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
-#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
-#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
-
-/* verdict bit breakdown
- *
-bit 0: when set -> this packet has been munged already
-
-bit 1: when set -> It is ok to munge this packet
-
-bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
-assume loop
-
-bit 6,7: Where this packet was last seen
-0: Above the transmit example at the socket level
-1: on the Ingress
-2: on the Egress
-
-bit 8: when set --> Request not to classify on ingress.
-
-bits 9,10,11: redirect counter - redirect TTL. Loop avoidance
-
- *
- * */
-
-#define TC_MUNGED _TC_MAKEMASK1(0)
-#define SET_TC_MUNGED(v) ( TC_MUNGED | (v & ~TC_MUNGED))
-#define CLR_TC_MUNGED(v) ( v & ~TC_MUNGED)
-
-#define TC_OK2MUNGE _TC_MAKEMASK1(1)
-#define SET_TC_OK2MUNGE(v) ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
-#define CLR_TC_OK2MUNGE(v) ( v & ~TC_OK2MUNGE)
-
-#define S_TC_VERD _TC_MAKE32(2)
-#define M_TC_VERD _TC_MAKEMASK(4,S_TC_VERD)
-#define G_TC_VERD(x) _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
-#define V_TC_VERD(x) _TC_MAKEVALUE(x,S_TC_VERD)
-#define SET_TC_VERD(v,n) ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
-
-#define S_TC_FROM _TC_MAKE32(6)
-#define M_TC_FROM _TC_MAKEMASK(2,S_TC_FROM)
-#define G_TC_FROM(x) _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
-#define V_TC_FROM(x) _TC_MAKEVALUE(x,S_TC_FROM)
-#define SET_TC_FROM(v,n) ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
-#define AT_STACK 0x0
-#define AT_INGRESS 0x1
-#define AT_EGRESS 0x2
-
-#define TC_NCLS _TC_MAKEMASK1(8)
-#define SET_TC_NCLS(v) ( TC_NCLS | (v & ~TC_NCLS))
-#define CLR_TC_NCLS(v) ( v & ~TC_NCLS)
-
-#define S_TC_RTTL _TC_MAKE32(9)
-#define M_TC_RTTL _TC_MAKEMASK(3,S_TC_RTTL)
-#define G_TC_RTTL(x) _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
-#define V_TC_RTTL(x) _TC_MAKEVALUE(x,S_TC_RTTL)
-#define SET_TC_RTTL(v,n) ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
-
-#define S_TC_AT _TC_MAKE32(12)
-#define M_TC_AT _TC_MAKEMASK(2,S_TC_AT)
-#define G_TC_AT(x) _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
-#define V_TC_AT(x) _TC_MAKEVALUE(x,S_TC_AT)
-#define SET_TC_AT(v,n) ((V_TC_AT(n)) | (v & ~M_TC_AT))
-
-/* Action attributes */
-enum {
- TCA_ACT_UNSPEC,
- TCA_ACT_KIND,
- TCA_ACT_OPTIONS,
- TCA_ACT_INDEX,
- TCA_ACT_STATS,
- __TCA_ACT_MAX
-};
-
-#define TCA_ACT_MAX __TCA_ACT_MAX
-#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
-#define TCA_ACT_MAX_PRIO 32
-#define TCA_ACT_BIND 1
-#define TCA_ACT_NOBIND 0
-#define TCA_ACT_UNBIND 1
-#define TCA_ACT_NOUNBIND 0
-#define TCA_ACT_REPLACE 1
-#define TCA_ACT_NOREPLACE 0
-#define MAX_REC_LOOP 4
-#define MAX_RED_LOOP 4
-
-#define TC_ACT_UNSPEC (-1)
-#define TC_ACT_OK 0
-#define TC_ACT_RECLASSIFY 1
-#define TC_ACT_SHOT 2
-#define TC_ACT_PIPE 3
-#define TC_ACT_STOLEN 4
-#define TC_ACT_QUEUED 5
-#define TC_ACT_REPEAT 6
-#define TC_ACT_JUMP 0x10000000
-
-/* Action type identifiers*/
-enum {
- TCA_ID_UNSPEC=0,
- TCA_ID_POLICE=1,
- /* other actions go here */
- __TCA_ID_MAX=255
-};
-
-#define TCA_ID_MAX __TCA_ID_MAX
-
-struct tc_police {
- __u32 index;
- int action;
-#define TC_POLICE_UNSPEC TC_ACT_UNSPEC
-#define TC_POLICE_OK TC_ACT_OK
-#define TC_POLICE_RECLASSIFY TC_ACT_RECLASSIFY
-#define TC_POLICE_SHOT TC_ACT_SHOT
-#define TC_POLICE_PIPE TC_ACT_PIPE
-
- __u32 limit;
- __u32 burst;
- __u32 mtu;
- struct tc_ratespec rate;
- struct tc_ratespec peakrate;
- int refcnt;
- int bindcnt;
- __u32 capab;
-};
-
-struct tcf_t {
- __u64 install;
- __u64 lastuse;
- __u64 expires;
-};
-
-struct tc_cnt {
- int refcnt;
- int bindcnt;
-};
-
-#define tc_gen \
- __u32 index; \
- __u32 capab; \
- int action; \
- int refcnt; \
- int bindcnt
-
-enum {
- TCA_POLICE_UNSPEC,
- TCA_POLICE_TBF,
- TCA_POLICE_RATE,
- TCA_POLICE_PEAKRATE,
- TCA_POLICE_AVRATE,
- TCA_POLICE_RESULT,
- __TCA_POLICE_MAX
-#define TCA_POLICE_RESULT TCA_POLICE_RESULT
-};
-
-#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
-
-/* U32 filters */
-
-#define TC_U32_HTID(h) ((h)&0xFFF00000)
-#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
-#define TC_U32_HASH(h) (((h)>>12)&0xFF)
-#define TC_U32_NODE(h) ((h)&0xFFF)
-#define TC_U32_KEY(h) ((h)&0xFFFFF)
-#define TC_U32_UNSPEC 0
-#define TC_U32_ROOT (0xFFF00000)
-
-enum {
- TCA_U32_UNSPEC,
- TCA_U32_CLASSID,
- TCA_U32_HASH,
- TCA_U32_LINK,
- TCA_U32_DIVISOR,
- TCA_U32_SEL,
- TCA_U32_POLICE,
- TCA_U32_ACT,
- TCA_U32_INDEV,
- TCA_U32_PCNT,
- TCA_U32_MARK,
- __TCA_U32_MAX
-};
-
-#define TCA_U32_MAX (__TCA_U32_MAX - 1)
-
-struct tc_u32_key {
- __be32 mask;
- __be32 val;
- int off;
- int offmask;
-};
-
-struct tc_u32_sel {
- unsigned char flags;
- unsigned char offshift;
- unsigned char nkeys;
-
- __be16 offmask;
- __u16 off;
- short offoff;
-
- short hoff;
- __be32 hmask;
- struct tc_u32_key keys[0];
-};
-
-struct tc_u32_mark {
- __u32 val;
- __u32 mask;
- __u32 success;
-};
-
-struct tc_u32_pcnt {
- __u64 rcnt;
- __u64 rhit;
- __u64 kcnts[0];
-};
-
-/* Flags */
-
-#define TC_U32_TERMINAL 1
-#define TC_U32_OFFSET 2
-#define TC_U32_VAROFFSET 4
-#define TC_U32_EAT 8
-
-#define TC_U32_MAXDEPTH 8
-
-
-/* RSVP filter */
-
-enum {
- TCA_RSVP_UNSPEC,
- TCA_RSVP_CLASSID,
- TCA_RSVP_DST,
- TCA_RSVP_SRC,
- TCA_RSVP_PINFO,
- TCA_RSVP_POLICE,
- TCA_RSVP_ACT,
- __TCA_RSVP_MAX
-};
-
-#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
-
-struct tc_rsvp_gpi {
- __u32 key;
- __u32 mask;
- int offset;
-};
-
-struct tc_rsvp_pinfo {
- struct tc_rsvp_gpi dpi;
- struct tc_rsvp_gpi spi;
- __u8 protocol;
- __u8 tunnelid;
- __u8 tunnelhdr;
- __u8 pad;
-};
-
-/* ROUTE filter */
-
-enum {
- TCA_ROUTE4_UNSPEC,
- TCA_ROUTE4_CLASSID,
- TCA_ROUTE4_TO,
- TCA_ROUTE4_FROM,
- TCA_ROUTE4_IIF,
- TCA_ROUTE4_POLICE,
- TCA_ROUTE4_ACT,
- __TCA_ROUTE4_MAX
-};
-
-#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
-
-
-/* FW filter */
-
-enum {
- TCA_FW_UNSPEC,
- TCA_FW_CLASSID,
- TCA_FW_POLICE,
- TCA_FW_INDEV, /* used by CONFIG_NET_CLS_IND */
- TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
- TCA_FW_MASK,
- __TCA_FW_MAX
-};
-
-#define TCA_FW_MAX (__TCA_FW_MAX - 1)
-
-/* TC index filter */
-
-enum {
- TCA_TCINDEX_UNSPEC,
- TCA_TCINDEX_HASH,
- TCA_TCINDEX_MASK,
- TCA_TCINDEX_SHIFT,
- TCA_TCINDEX_FALL_THROUGH,
- TCA_TCINDEX_CLASSID,
- TCA_TCINDEX_POLICE,
- TCA_TCINDEX_ACT,
- __TCA_TCINDEX_MAX
-};
-
-#define TCA_TCINDEX_MAX (__TCA_TCINDEX_MAX - 1)
-
-/* Flow filter */
-
-enum {
- FLOW_KEY_SRC,
- FLOW_KEY_DST,
- FLOW_KEY_PROTO,
- FLOW_KEY_PROTO_SRC,
- FLOW_KEY_PROTO_DST,
- FLOW_KEY_IIF,
- FLOW_KEY_PRIORITY,
- FLOW_KEY_MARK,
- FLOW_KEY_NFCT,
- FLOW_KEY_NFCT_SRC,
- FLOW_KEY_NFCT_DST,
- FLOW_KEY_NFCT_PROTO_SRC,
- FLOW_KEY_NFCT_PROTO_DST,
- FLOW_KEY_RTCLASSID,
- FLOW_KEY_SKUID,
- FLOW_KEY_SKGID,
- FLOW_KEY_VLAN_TAG,
- FLOW_KEY_RXHASH,
- __FLOW_KEY_MAX,
-};
-
-#define FLOW_KEY_MAX (__FLOW_KEY_MAX - 1)
-
-enum {
- FLOW_MODE_MAP,
- FLOW_MODE_HASH,
-};
-
-enum {
- TCA_FLOW_UNSPEC,
- TCA_FLOW_KEYS,
- TCA_FLOW_MODE,
- TCA_FLOW_BASECLASS,
- TCA_FLOW_RSHIFT,
- TCA_FLOW_ADDEND,
- TCA_FLOW_MASK,
- TCA_FLOW_XOR,
- TCA_FLOW_DIVISOR,
- TCA_FLOW_ACT,
- TCA_FLOW_POLICE,
- TCA_FLOW_EMATCHES,
- TCA_FLOW_PERTURB,
- __TCA_FLOW_MAX
-};
-
-#define TCA_FLOW_MAX (__TCA_FLOW_MAX - 1)
-
-/* Basic filter */
-
-enum {
- TCA_BASIC_UNSPEC,
- TCA_BASIC_CLASSID,
- TCA_BASIC_EMATCHES,
- TCA_BASIC_ACT,
- TCA_BASIC_POLICE,
- __TCA_BASIC_MAX
-};
-
-#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
-
-
-/* Cgroup classifier */
-
-enum {
- TCA_CGROUP_UNSPEC,
- TCA_CGROUP_ACT,
- TCA_CGROUP_POLICE,
- TCA_CGROUP_EMATCHES,
- __TCA_CGROUP_MAX,
-};
-
-#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
-
-/* Extended Matches */
-
-struct tcf_ematch_tree_hdr {
- __u16 nmatches;
- __u16 progid;
-};
-
-enum {
- TCA_EMATCH_TREE_UNSPEC,
- TCA_EMATCH_TREE_HDR,
- TCA_EMATCH_TREE_LIST,
- __TCA_EMATCH_TREE_MAX
-};
-#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
-
-struct tcf_ematch_hdr {
- __u16 matchid;
- __u16 kind;
- __u16 flags;
- __u16 pad; /* currently unused */
-};
-
-/* 0 1
- * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
- * +-----------------------+-+-+---+
- * | Unused |S|I| R |
- * +-----------------------+-+-+---+
- *
- * R(2) ::= relation to next ematch
- * where: 0 0 END (last ematch)
- * 0 1 AND
- * 1 0 OR
- * 1 1 Unused (invalid)
- * I(1) ::= invert result
- * S(1) ::= simple payload
- */
-#define TCF_EM_REL_END 0
-#define TCF_EM_REL_AND (1<<0)
-#define TCF_EM_REL_OR (1<<1)
-#define TCF_EM_INVERT (1<<2)
-#define TCF_EM_SIMPLE (1<<3)
-
-#define TCF_EM_REL_MASK 3
-#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
-
-enum {
- TCF_LAYER_LINK,
- TCF_LAYER_NETWORK,
- TCF_LAYER_TRANSPORT,
- __TCF_LAYER_MAX
-};
-#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
-
-/* Ematch type assignments
- * 1..32767 Reserved for ematches inside kernel tree
- * 32768..65535 Free to use, not reliable
- */
-#define TCF_EM_CONTAINER 0
-#define TCF_EM_CMP 1
-#define TCF_EM_NBYTE 2
-#define TCF_EM_U32 3
-#define TCF_EM_META 4
-#define TCF_EM_TEXT 5
-#define TCF_EM_VLAN 6
-#define TCF_EM_CANID 7
-#define TCF_EM_IPSET 8
-#define TCF_EM_MAX 8
-
-enum {
- TCF_EM_PROG_TC
-};
-
-enum {
- TCF_EM_OPND_EQ,
- TCF_EM_OPND_GT,
- TCF_EM_OPND_LT
-};
-
-#endif
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
deleted file mode 100644
index 32aef0a..0000000
--- a/include/linux/pkt_sched.h
+++ /dev/null
@@ -1,738 +0,0 @@
-#ifndef __LINUX_PKT_SCHED_H
-#define __LINUX_PKT_SCHED_H
-
-#include <linux/types.h>
-
-/* Logical priority bands not depending on specific packet scheduler.
- Every scheduler will map them to real traffic classes, if it has
- no more precise mechanism to classify packets.
-
- These numbers have no special meaning, though their coincidence
- with obsolete IPv6 values is not occasional :-). New IPv6 drafts
- preferred full anarchy inspired by diffserv group.
-
- Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
- class, actually, as rule it will be handled with more care than
- filler or even bulk.
- */
-
-#define TC_PRIO_BESTEFFORT 0
-#define TC_PRIO_FILLER 1
-#define TC_PRIO_BULK 2
-#define TC_PRIO_INTERACTIVE_BULK 4
-#define TC_PRIO_INTERACTIVE 6
-#define TC_PRIO_CONTROL 7
-
-#define TC_PRIO_MAX 15
-
-/* Generic queue statistics, available for all the elements.
- Particular schedulers may have also their private records.
- */
-
-struct tc_stats {
- __u64 bytes; /* Number of enqueued bytes */
- __u32 packets; /* Number of enqueued packets */
- __u32 drops; /* Packets dropped because of lack of resources */
- __u32 overlimits; /* Number of throttle events when this
- * flow goes out of allocated bandwidth */
- __u32 bps; /* Current flow byte rate */
- __u32 pps; /* Current flow packet rate */
- __u32 qlen;
- __u32 backlog;
-};
-
-struct tc_estimator {
- signed char interval;
- unsigned char ewma_log;
-};
-
-/* "Handles"
- ---------
-
- All the traffic control objects have 32bit identifiers, or "handles".
-
- They can be considered as opaque numbers from user API viewpoint,
- but actually they always consist of two fields: major and
- minor numbers, which are interpreted by kernel specially,
- that may be used by applications, though not recommended.
-
- F.e. qdisc handles always have minor number equal to zero,
- classes (or flows) have major equal to parent qdisc major, and
- minor uniquely identifying class inside qdisc.
-
- Macros to manipulate handles:
- */
-
-#define TC_H_MAJ_MASK (0xFFFF0000U)
-#define TC_H_MIN_MASK (0x0000FFFFU)
-#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
-#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
-#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
-
-#define TC_H_UNSPEC (0U)
-#define TC_H_ROOT (0xFFFFFFFFU)
-#define TC_H_INGRESS (0xFFFFFFF1U)
-
-struct tc_ratespec {
- unsigned char cell_log;
- unsigned char __reserved;
- unsigned short overhead;
- short cell_align;
- unsigned short mpu;
- __u32 rate;
-};
-
-#define TC_RTAB_SIZE 1024
-
-struct tc_sizespec {
- unsigned char cell_log;
- unsigned char size_log;
- short cell_align;
- int overhead;
- unsigned int linklayer;
- unsigned int mpu;
- unsigned int mtu;
- unsigned int tsize;
-};
-
-enum {
- TCA_STAB_UNSPEC,
- TCA_STAB_BASE,
- TCA_STAB_DATA,
- __TCA_STAB_MAX
-};
-
-#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
-
-/* FIFO section */
-
-struct tc_fifo_qopt {
- __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */
-};
-
-/* PRIO section */
-
-#define TCQ_PRIO_BANDS 16
-#define TCQ_MIN_PRIO_BANDS 2
-
-struct tc_prio_qopt {
- int bands; /* Number of bands */
- __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */
-};
-
-/* MULTIQ section */
-
-struct tc_multiq_qopt {
- __u16 bands; /* Number of bands */
- __u16 max_bands; /* Maximum number of queues */
-};
-
-/* PLUG section */
-
-#define TCQ_PLUG_BUFFER 0
-#define TCQ_PLUG_RELEASE_ONE 1
-#define TCQ_PLUG_RELEASE_INDEFINITE 2
-#define TCQ_PLUG_LIMIT 3
-
-struct tc_plug_qopt {
- /* TCQ_PLUG_BUFFER: Inset a plug into the queue and
- * buffer any incoming packets
- * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head
- * to beginning of the next plug.
- * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue.
- * Stop buffering packets until the next TCQ_PLUG_BUFFER
- * command is received (just act as a pass-thru queue).
- * TCQ_PLUG_LIMIT: Increase/decrease queue size
- */
- int action;
- __u32 limit;
-};
-
-/* TBF section */
-
-struct tc_tbf_qopt {
- struct tc_ratespec rate;
- struct tc_ratespec peakrate;
- __u32 limit;
- __u32 buffer;
- __u32 mtu;
-};
-
-enum {
- TCA_TBF_UNSPEC,
- TCA_TBF_PARMS,
- TCA_TBF_RTAB,
- TCA_TBF_PTAB,
- __TCA_TBF_MAX,
-};
-
-#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
-
-
-/* TEQL section */
-
-/* TEQL does not require any parameters */
-
-/* SFQ section */
-
-struct tc_sfq_qopt {
- unsigned quantum; /* Bytes per round allocated to flow */
- int perturb_period; /* Period of hash perturbation */
- __u32 limit; /* Maximal packets in queue */
- unsigned divisor; /* Hash divisor */
- unsigned flows; /* Maximal number of flows */
-};
-
-struct tc_sfqred_stats {
- __u32 prob_drop; /* Early drops, below max threshold */
- __u32 forced_drop; /* Early drops, after max threshold */
- __u32 prob_mark; /* Marked packets, below max threshold */
- __u32 forced_mark; /* Marked packets, after max threshold */
- __u32 prob_mark_head; /* Marked packets, below max threshold */
- __u32 forced_mark_head;/* Marked packets, after max threshold */
-};
-
-struct tc_sfq_qopt_v1 {
- struct tc_sfq_qopt v0;
- unsigned int depth; /* max number of packets per flow */
- unsigned int headdrop;
-/* SFQRED parameters */
- __u32 limit; /* HARD maximal flow queue length (bytes) */
- __u32 qth_min; /* Min average length threshold (bytes) */
- __u32 qth_max; /* Max average length threshold (bytes) */
- unsigned char Wlog; /* log(W) */
- unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */
- unsigned char Scell_log; /* cell size for idle damping */
- unsigned char flags;
- __u32 max_P; /* probability, high resolution */
-/* SFQRED stats */
- struct tc_sfqred_stats stats;
-};
-
-
-struct tc_sfq_xstats {
- __s32 allot;
-};
-
-/* RED section */
-
-enum {
- TCA_RED_UNSPEC,
- TCA_RED_PARMS,
- TCA_RED_STAB,
- TCA_RED_MAX_P,
- __TCA_RED_MAX,
-};
-
-#define TCA_RED_MAX (__TCA_RED_MAX - 1)
-
-struct tc_red_qopt {
- __u32 limit; /* HARD maximal queue length (bytes) */
- __u32 qth_min; /* Min average length threshold (bytes) */
- __u32 qth_max; /* Max average length threshold (bytes) */
- unsigned char Wlog; /* log(W) */
- unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */
- unsigned char Scell_log; /* cell size for idle damping */
- unsigned char flags;
-#define TC_RED_ECN 1
-#define TC_RED_HARDDROP 2
-#define TC_RED_ADAPTATIVE 4
-};
-
-struct tc_red_xstats {
- __u32 early; /* Early drops */
- __u32 pdrop; /* Drops due to queue limits */
- __u32 other; /* Drops due to drop() calls */
- __u32 marked; /* Marked packets */
-};
-
-/* GRED section */
-
-#define MAX_DPs 16
-
-enum {
- TCA_GRED_UNSPEC,
- TCA_GRED_PARMS,
- TCA_GRED_STAB,
- TCA_GRED_DPS,
- TCA_GRED_MAX_P,
- __TCA_GRED_MAX,
-};
-
-#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
-
-struct tc_gred_qopt {
- __u32 limit; /* HARD maximal queue length (bytes) */
- __u32 qth_min; /* Min average length threshold (bytes) */
- __u32 qth_max; /* Max average length threshold (bytes) */
- __u32 DP; /* up to 2^32 DPs */
- __u32 backlog;
- __u32 qave;
- __u32 forced;
- __u32 early;
- __u32 other;
- __u32 pdrop;
- __u8 Wlog; /* log(W) */
- __u8 Plog; /* log(P_max/(qth_max-qth_min)) */
- __u8 Scell_log; /* cell size for idle damping */
- __u8 prio; /* prio of this VQ */
- __u32 packets;
- __u32 bytesin;
-};
-
-/* gred setup */
-struct tc_gred_sopt {
- __u32 DPs;
- __u32 def_DP;
- __u8 grio;
- __u8 flags;
- __u16 pad1;
-};
-
-/* CHOKe section */
-
-enum {
- TCA_CHOKE_UNSPEC,
- TCA_CHOKE_PARMS,
- TCA_CHOKE_STAB,
- TCA_CHOKE_MAX_P,
- __TCA_CHOKE_MAX,
-};
-
-#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1)
-
-struct tc_choke_qopt {
- __u32 limit; /* Hard queue length (packets) */
- __u32 qth_min; /* Min average threshold (packets) */
- __u32 qth_max; /* Max average threshold (packets) */
- unsigned char Wlog; /* log(W) */
- unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */
- unsigned char Scell_log; /* cell size for idle damping */
- unsigned char flags; /* see RED flags */
-};
-
-struct tc_choke_xstats {
- __u32 early; /* Early drops */
- __u32 pdrop; /* Drops due to queue limits */
- __u32 other; /* Drops due to drop() calls */
- __u32 marked; /* Marked packets */
- __u32 matched; /* Drops due to flow match */
-};
-
-/* HTB section */
-#define TC_HTB_NUMPRIO 8
-#define TC_HTB_MAXDEPTH 8
-#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */
-
-struct tc_htb_opt {
- struct tc_ratespec rate;
- struct tc_ratespec ceil;
- __u32 buffer;
- __u32 cbuffer;
- __u32 quantum;
- __u32 level; /* out only */
- __u32 prio;
-};
-struct tc_htb_glob {
- __u32 version; /* to match HTB/TC */
- __u32 rate2quantum; /* bps->quantum divisor */
- __u32 defcls; /* default class number */
- __u32 debug; /* debug flags */
-
- /* stats */
- __u32 direct_pkts; /* count of non shaped packets */
-};
-enum {
- TCA_HTB_UNSPEC,
- TCA_HTB_PARMS,
- TCA_HTB_INIT,
- TCA_HTB_CTAB,
- TCA_HTB_RTAB,
- __TCA_HTB_MAX,
-};
-
-#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
-
-struct tc_htb_xstats {
- __u32 lends;
- __u32 borrows;
- __u32 giants; /* too big packets (rate will not be accurate) */
- __u32 tokens;
- __u32 ctokens;
-};
-
-/* HFSC section */
-
-struct tc_hfsc_qopt {
- __u16 defcls; /* default class */
-};
-
-struct tc_service_curve {
- __u32 m1; /* slope of the first segment in bps */
- __u32 d; /* x-projection of the first segment in us */
- __u32 m2; /* slope of the second segment in bps */
-};
-
-struct tc_hfsc_stats {
- __u64 work; /* total work done */
- __u64 rtwork; /* work done by real-time criteria */
- __u32 period; /* current period */
- __u32 level; /* class level in hierarchy */
-};
-
-enum {
- TCA_HFSC_UNSPEC,
- TCA_HFSC_RSC,
- TCA_HFSC_FSC,
- TCA_HFSC_USC,
- __TCA_HFSC_MAX,
-};
-
-#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
-
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO 8
-#define TC_CBQ_MAXLEVEL 8
-#define TC_CBQ_DEF_EWMA 5
-
-struct tc_cbq_lssopt {
- unsigned char change;
- unsigned char flags;
-#define TCF_CBQ_LSS_BOUNDED 1
-#define TCF_CBQ_LSS_ISOLATED 2
- unsigned char ewma_log;
- unsigned char level;
-#define TCF_CBQ_LSS_FLAGS 1
-#define TCF_CBQ_LSS_EWMA 2
-#define TCF_CBQ_LSS_MAXIDLE 4
-#define TCF_CBQ_LSS_MINIDLE 8
-#define TCF_CBQ_LSS_OFFTIME 0x10
-#define TCF_CBQ_LSS_AVPKT 0x20
- __u32 maxidle;
- __u32 minidle;
- __u32 offtime;
- __u32 avpkt;
-};
-
-struct tc_cbq_wrropt {
- unsigned char flags;
- unsigned char priority;
- unsigned char cpriority;
- unsigned char __reserved;
- __u32 allot;
- __u32 weight;
-};
-
-struct tc_cbq_ovl {
- unsigned char strategy;
-#define TC_CBQ_OVL_CLASSIC 0
-#define TC_CBQ_OVL_DELAY 1
-#define TC_CBQ_OVL_LOWPRIO 2
-#define TC_CBQ_OVL_DROP 3
-#define TC_CBQ_OVL_RCLASSIC 4
- unsigned char priority2;
- __u16 pad;
- __u32 penalty;
-};
-
-struct tc_cbq_police {
- unsigned char police;
- unsigned char __res1;
- unsigned short __res2;
-};
-
-struct tc_cbq_fopt {
- __u32 split;
- __u32 defmap;
- __u32 defchange;
-};
-
-struct tc_cbq_xstats {
- __u32 borrows;
- __u32 overactions;
- __s32 avgidle;
- __s32 undertime;
-};
-
-enum {
- TCA_CBQ_UNSPEC,
- TCA_CBQ_LSSOPT,
- TCA_CBQ_WRROPT,
- TCA_CBQ_FOPT,
- TCA_CBQ_OVL_STRATEGY,
- TCA_CBQ_RATE,
- TCA_CBQ_RTAB,
- TCA_CBQ_POLICE,
- __TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
- TCA_DSMARK_UNSPEC,
- TCA_DSMARK_INDICES,
- TCA_DSMARK_DEFAULT_INDEX,
- TCA_DSMARK_SET_TC_INDEX,
- TCA_DSMARK_MASK,
- TCA_DSMARK_VALUE,
- __TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM section */
-
-enum {
- TCA_ATM_UNSPEC,
- TCA_ATM_FD, /* file/socket descriptor */
- TCA_ATM_PTR, /* pointer to descriptor - later */
- TCA_ATM_HDR, /* LL header */
- TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */
- TCA_ATM_ADDR, /* PVC address (for output only) */
- TCA_ATM_STATE, /* VC state (ATM_VS_*; for output only) */
- __TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX (__TCA_ATM_MAX - 1)
-
-/* Network emulator */
-
-enum {
- TCA_NETEM_UNSPEC,
- TCA_NETEM_CORR,
- TCA_NETEM_DELAY_DIST,
- TCA_NETEM_REORDER,
- TCA_NETEM_CORRUPT,
- TCA_NETEM_LOSS,
- TCA_NETEM_RATE,
- TCA_NETEM_ECN,
- __TCA_NETEM_MAX,
-};
-
-#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
-
-struct tc_netem_qopt {
- __u32 latency; /* added delay (us) */
- __u32 limit; /* fifo limit (packets) */
- __u32 loss; /* random packet loss (0=none ~0=100%) */
- __u32 gap; /* re-ordering gap (0 for none) */
- __u32 duplicate; /* random packet dup (0=none ~0=100%) */
- __u32 jitter; /* random jitter in latency (us) */
-};
-
-struct tc_netem_corr {
- __u32 delay_corr; /* delay correlation */
- __u32 loss_corr; /* packet loss correlation */
- __u32 dup_corr; /* duplicate correlation */
-};
-
-struct tc_netem_reorder {
- __u32 probability;
- __u32 correlation;
-};
-
-struct tc_netem_corrupt {
- __u32 probability;
- __u32 correlation;
-};
-
-struct tc_netem_rate {
- __u32 rate; /* byte/s */
- __s32 packet_overhead;
- __u32 cell_size;
- __s32 cell_overhead;
-};
-
-enum {
- NETEM_LOSS_UNSPEC,
- NETEM_LOSS_GI, /* General Intuitive - 4 state model */
- NETEM_LOSS_GE, /* Gilbert Elliot models */
- __NETEM_LOSS_MAX
-};
-#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
-
-/* State transition probabilities for 4 state model */
-struct tc_netem_gimodel {
- __u32 p13;
- __u32 p31;
- __u32 p32;
- __u32 p14;
- __u32 p23;
-};
-
-/* Gilbert-Elliot models */
-struct tc_netem_gemodel {
- __u32 p;
- __u32 r;
- __u32 h;
- __u32 k1;
-};
-
-#define NETEM_DIST_SCALE 8192
-#define NETEM_DIST_MAX 16384
-
-/* DRR */
-
-enum {
- TCA_DRR_UNSPEC,
- TCA_DRR_QUANTUM,
- __TCA_DRR_MAX
-};
-
-#define TCA_DRR_MAX (__TCA_DRR_MAX - 1)
-
-struct tc_drr_stats {
- __u32 deficit;
-};
-
-/* MQPRIO */
-#define TC_QOPT_BITMASK 15
-#define TC_QOPT_MAX_QUEUE 16
-
-struct tc_mqprio_qopt {
- __u8 num_tc;
- __u8 prio_tc_map[TC_QOPT_BITMASK + 1];
- __u8 hw;
- __u16 count[TC_QOPT_MAX_QUEUE];
- __u16 offset[TC_QOPT_MAX_QUEUE];
-};
-
-/* SFB */
-
-enum {
- TCA_SFB_UNSPEC,
- TCA_SFB_PARMS,
- __TCA_SFB_MAX,
-};
-
-#define TCA_SFB_MAX (__TCA_SFB_MAX - 1)
-
-/*
- * Note: increment, decrement are Q0.16 fixed-point values.
- */
-struct tc_sfb_qopt {
- __u32 rehash_interval; /* delay between hash move, in ms */
- __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */
- __u32 max; /* max len of qlen_min */
- __u32 bin_size; /* maximum queue length per bin */
- __u32 increment; /* probability increment, (d1 in Blue) */
- __u32 decrement; /* probability decrement, (d2 in Blue) */
- __u32 limit; /* max SFB queue length */
- __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */
- __u32 penalty_burst;
-};
-
-struct tc_sfb_xstats {
- __u32 earlydrop;
- __u32 penaltydrop;
- __u32 bucketdrop;
- __u32 queuedrop;
- __u32 childdrop; /* drops in child qdisc */
- __u32 marked;
- __u32 maxqlen;
- __u32 maxprob;
- __u32 avgprob;
-};
-
-#define SFB_MAX_PROB 0xFFFF
-
-/* QFQ */
-enum {
- TCA_QFQ_UNSPEC,
- TCA_QFQ_WEIGHT,
- TCA_QFQ_LMAX,
- __TCA_QFQ_MAX
-};
-
-#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1)
-
-struct tc_qfq_stats {
- __u32 weight;
- __u32 lmax;
-};
-
-/* CODEL */
-
-enum {
- TCA_CODEL_UNSPEC,
- TCA_CODEL_TARGET,
- TCA_CODEL_LIMIT,
- TCA_CODEL_INTERVAL,
- TCA_CODEL_ECN,
- __TCA_CODEL_MAX
-};
-
-#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1)
-
-struct tc_codel_xstats {
- __u32 maxpacket; /* largest packet we've seen so far */
- __u32 count; /* how many drops we've done since the last time we
- * entered dropping state
- */
- __u32 lastcount; /* count at entry to dropping state */
- __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */
- __s32 drop_next; /* time to drop next packet */
- __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */
- __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */
- __u32 dropping; /* are we in dropping state ? */
-};
-
-/* FQ_CODEL */
-
-enum {
- TCA_FQ_CODEL_UNSPEC,
- TCA_FQ_CODEL_TARGET,
- TCA_FQ_CODEL_LIMIT,
- TCA_FQ_CODEL_INTERVAL,
- TCA_FQ_CODEL_ECN,
- TCA_FQ_CODEL_FLOWS,
- TCA_FQ_CODEL_QUANTUM,
- __TCA_FQ_CODEL_MAX
-};
-
-#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1)
-
-enum {
- TCA_FQ_CODEL_XSTATS_QDISC,
- TCA_FQ_CODEL_XSTATS_CLASS,
-};
-
-struct tc_fq_codel_qd_stats {
- __u32 maxpacket; /* largest packet we've seen so far */
- __u32 drop_overlimit; /* number of time max qdisc
- * packet limit was hit
- */
- __u32 ecn_mark; /* number of packets we ECN marked
- * instead of being dropped
- */
- __u32 new_flow_count; /* number of time packets
- * created a 'new flow'
- */
- __u32 new_flows_len; /* count of flows in new list */
- __u32 old_flows_len; /* count of flows in old list */
-};
-
-struct tc_fq_codel_cl_stats {
- __s32 deficit;
- __u32 ldelay; /* in-queue delay seen by most recently
- * dequeued packet
- */
- __u32 count;
- __u32 lastcount;
- __u32 dropping;
- __s32 drop_next;
-};
-
-struct tc_fq_codel_xstats {
- __u32 type;
- union {
- struct tc_fq_codel_qd_stats qdisc_stats;
- struct tc_fq_codel_cl_stats class_stats;
- };
-};
-
-#endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 721301b..93d142a 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -12,108 +12,13 @@
#ifndef __PKTCDVD_H
#define __PKTCDVD_H
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG 1
-
-#define MAX_WRITERS 8
-
-#define PKT_RB_POOL_SIZE 512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME (HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING 1
-#else
-#define USE_WCACHING 0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR 1
-#define PACKET_CDRW 2
-#define PACKET_DVDR 3
-#define PACKET_DVDRW 4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE 1 /* pd is writable */
-#define PACKET_NWA_VALID 2 /* next writable address valid */
-#define PACKET_LRA_VALID 3 /* last recorded address valid */
-#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */
- /* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY 0
-#define PACKET_DISC_INCOMPLETE 1
-#define PACKET_DISC_COMPLETE 2
-#define PACKET_DISC_OTHER 3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1 1
-#define PACKET_MODE2 2
-#define PACKET_BLOCK_MODE1 8
-#define PACKET_BLOCK_MODE2 10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY 0
-#define PACKET_SESSION_INCOMPLETE 1
-#define PACKET_SESSION_RESERVED 2
-#define PACKET_SESSION_COMPLETE 3
-
-#define PACKET_MCN "4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP 0
-#define PKT_CTRL_CMD_TEARDOWN 1
-#define PKT_CTRL_CMD_STATUS 2
-
-struct pkt_ctrl_command {
- __u32 command; /* in: Setup, teardown, status */
- __u32 dev_index; /* in/out: Device index */
- __u32 dev; /* in/out: Device nr for cdrw device */
- __u32 pkt_dev; /* in/out: Device nr for packet device */
- __u32 num_devices; /* out: Largest device index + 1 */
- __u32 padding; /* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC ('X')
-#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/cdrom.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <linux/mempool.h>
+#include <uapi/linux/pktcdvd.h>
/* default bio write queue congestion marks */
#define PKT_WRITE_CONGESTION_ON 10000
@@ -297,6 +202,4 @@ struct pktcdvd_device
struct dentry *dfs_f_info; /* debugfs: info file */
};
-#endif /* __KERNEL__ */
-
#endif /* __PKTCDVD_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 84e6a55..99b400b 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -5,137 +5,11 @@
*
* Copyright (C) 1998 Paul Mackerras.
*/
-
#ifndef _LINUX_PMU_H
#define _LINUX_PMU_H
-#define PMU_DRIVER_VERSION 2
-
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0 0x10 /* control power of some devices */
-#define PMU_POWER_CTRL 0x11 /* control power of some devices */
-#define PMU_ADB_CMD 0x20 /* send ADB packet */
-#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */
-#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */
-#define PMU_SET_RTC 0x30 /* set real-time clock */
-#define PMU_READ_RTC 0x38 /* read real-time clock */
-#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */
-#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */
-#define PMU_PCEJECT 0x4c /* eject PC-card from slot */
-#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */
-#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */
-#define PMU_INT_ACK 0x78 /* read interrupt bits */
-#define PMU_SHUTDOWN 0x7e /* turn power off */
-#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */
-#define PMU_SLEEP 0x7f /* put CPU to sleep */
-#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */
-#define PMU_I2C_CMD 0x9a /* I2C operations */
-#define PMU_RESET 0xd0 /* reset CPU */
-#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */
-#define PMU_GET_COVER 0xdc /* report cover open/closed */
-#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */
-#define PMU_GET_VERSION 0xea /* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON 0x80 /* OR this to power ON the device */
-#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON 0x80 /* OR this to power ON the device */
-#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT 0x01 /* backlight power */
-#define PMU_POW_CHARGER 0x02 /* battery charger power */
-#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */
-#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */
-#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */
-#define PMU_INT_BATTERY 0x20 /* Battery state change */
-#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */
-#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */
-#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE 0
-#define PMU_I2C_MODE_STDSUB 1
-#define PMU_I2C_MODE_COMBINED 2
-
-#define PMU_I2C_BUS_STATUS 0
-#define PMU_I2C_BUS_SYSCLK 1
-#define PMU_I2C_BUS_POWER 2
-
-#define PMU_I2C_STATUS_OK 0
-#define PMU_I2C_STATUS_DATAREAD 1
-#define PMU_I2C_STATUS_BUSY 0xfe
-
-
-/* Kind of PMU (model) */
-enum {
- PMU_UNKNOWN,
- PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */
- PMU_HEATHROW_BASED, /* PowerBook G3 series */
- PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */
- PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */
- PMU_68K_V1, /* 68K PMU, version 1 */
- PMU_68K_V2, /* 68K PMU, version 2 */
-};
+#include <uapi/linux/pmu.h>
-/* PMU PMU_POWER_EVENTS commands */
-enum {
- PMU_PWR_GET_POWERUP_EVENTS = 0x00,
- PMU_PWR_SET_POWERUP_EVENTS = 0x01,
- PMU_PWR_CLR_POWERUP_EVENTS = 0x02,
- PMU_PWR_GET_WAKEUP_EVENTS = 0x03,
- PMU_PWR_SET_WAKEUP_EVENTS = 0x04,
- PMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
- PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
- PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
- PMU_PWR_WAKEUP_AC_CHANGE = 0x04,
- PMU_PWR_WAKEUP_LID_OPEN = 0x08,
- PMU_PWR_WAKEUP_RING = 0x10,
-};
-
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP _IO('B', 0)
-/* out param: u32* backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t)
-/* in param: u32 backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t)
-/* out param: u32* PMU model */
-#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t)
-/* out param: u32* has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t)
-/* out param: u32* can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t)
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t)
-
-#ifdef __KERNEL__
extern int find_via_pmu(void);
@@ -208,6 +82,4 @@ extern int pmu_sys_suspended;
#define pmu_sys_suspended 0
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_PMU_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 48fe8bc..c08386f 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -1,9 +1,6 @@
#ifndef _LINUX_POLL_H
#define _LINUX_POLL_H
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/ktime.h>
@@ -12,6 +9,7 @@
#include <linux/fs.h>
#include <linux/sysctl.h>
#include <asm/uaccess.h>
+#include <uapi/linux/poll.h>
extern struct ctl_table epoll_table[]; /* for sysctl */
/* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
@@ -163,6 +161,4 @@ extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
-#endif /* KERNEL */
-
#endif /* _LINUX_POLL_H */
diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h
deleted file mode 100644
index 988f76e..0000000
--- a/include/linux/posix_types.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _LINUX_POSIX_TYPES_H
-#define _LINUX_POSIX_TYPES_H
-
-#include <linux/stddef.h>
-
-/*
- * This allows for 1024 file descriptors: if NR_OPEN is ever grown
- * beyond that you'll have to change this too. But 1024 fd's seem to be
- * enough even for such "real" unices like OSF/1, so hopefully this is
- * one limit that doesn't have to be changed [again].
- *
- * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
- * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
- * place for them. Solved by having dummy defines in <sys/time.h>.
- */
-
-/*
- * This macro may have been defined in <gnu/types.h>. But we always
- * use the one here.
- */
-#undef __FD_SETSIZE
-#define __FD_SETSIZE 1024
-
-typedef struct {
- unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))];
-} __kernel_fd_set;
-
-/* Type of a signal handler. */
-typedef void (*__kernel_sighandler_t)(int);
-
-/* Type of a SYSV IPC key. */
-typedef int __kernel_key_t;
-typedef int __kernel_mqd_t;
-
-#include <asm/posix_types.h>
-
-#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h
deleted file mode 100644
index dc18c5d..0000000
--- a/include/linux/ppdev.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/include/linux/ppdev.h
- *
- * User-space parallel port device driver (header file).
- *
- * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
- * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
- */
-
-#define PP_IOCTL 'p'
-
-/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
-#define PPSETMODE _IOW(PP_IOCTL, 0x80, int)
-
-/* Read status */
-#define PPRSTATUS _IOR(PP_IOCTL, 0x81, unsigned char)
-#define PPWSTATUS OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
-
-/* Read/write control */
-#define PPRCONTROL _IOR(PP_IOCTL, 0x83, unsigned char)
-#define PPWCONTROL _IOW(PP_IOCTL, 0x84, unsigned char)
-
-struct ppdev_frob_struct {
- unsigned char mask;
- unsigned char val;
-};
-#define PPFCONTROL _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
-
-/* Read/write data */
-#define PPRDATA _IOR(PP_IOCTL, 0x85, unsigned char)
-#define PPWDATA _IOW(PP_IOCTL, 0x86, unsigned char)
-
-/* Read/write econtrol (not used) */
-#define PPRECONTROL OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
-#define PPWECONTROL OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
-
-/* Read/write FIFO (not used) */
-#define PPRFIFO OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
-#define PPWFIFO OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
-
-/* Claim the port to start using it */
-#define PPCLAIM _IO(PP_IOCTL, 0x8b)
-
-/* Release the port when you aren't using it */
-#define PPRELEASE _IO(PP_IOCTL, 0x8c)
-
-/* Yield the port (release it if another driver is waiting,
- * then reclaim) */
-#define PPYIELD _IO(PP_IOCTL, 0x8d)
-
-/* Register device exclusively (must be before PPCLAIM). */
-#define PPEXCL _IO(PP_IOCTL, 0x8f)
-
-/* Data line direction: non-zero for input mode. */
-#define PPDATADIR _IOW(PP_IOCTL, 0x90, int)
-
-/* Negotiate a particular IEEE 1284 mode. */
-#define PPNEGOT _IOW(PP_IOCTL, 0x91, int)
-
-/* Set control lines when an interrupt occurs. */
-#define PPWCTLONIRQ _IOW(PP_IOCTL, 0x92, unsigned char)
-
-/* Clear (and return) interrupt count. */
-#define PPCLRIRQ _IOR(PP_IOCTL, 0x93, int)
-
-/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
-#define PPSETPHASE _IOW(PP_IOCTL, 0x94, int)
-
-/* Set and get port timeout (struct timeval's) */
-#define PPGETTIME _IOR(PP_IOCTL, 0x95, struct timeval)
-#define PPSETTIME _IOW(PP_IOCTL, 0x96, struct timeval)
-
-/* Get available modes (what the hardware can do) */
-#define PPGETMODES _IOR(PP_IOCTL, 0x97, unsigned int)
-
-/* Get the current mode and phaze */
-#define PPGETMODE _IOR(PP_IOCTL, 0x98, int)
-#define PPGETPHASE _IOR(PP_IOCTL, 0x99, int)
-
-/* get/set flags */
-#define PPGETFLAGS _IOR(PP_IOCTL, 0x9a, int)
-#define PPSETFLAGS _IOW(PP_IOCTL, 0x9b, int)
-
-/* flags visible to the world */
-#define PP_FASTWRITE (1<<2)
-#define PP_FASTREAD (1<<3)
-#define PP_W91284PIC (1<<4)
-
-/* only masks user-visible flags */
-#define PP_FLAGMASK (PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
-
-
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index b7dc06f..4ea1d37 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -10,7 +10,8 @@
#ifndef _NET_PPP_COMP_H
#define _NET_PPP_COMP_H
-#ifdef __KERNEL__
+#include <uapi/linux/ppp-comp.h>
+
struct module;
@@ -100,89 +101,6 @@ struct compressor {
#define DECOMP_ERROR -1 /* error detected before decomp. */
#define DECOMP_FATALERROR -2 /* error detected after decomp. */
-#endif /* __KERNEL__ */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ 1
-#define CCP_CONFACK 2
-#define CCP_TERMREQ 5
-#define CCP_TERMACK 6
-#define CCP_RESETREQ 14
-#define CCP_RESETACK 15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH 32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp) ((dp)[0])
-#define CCP_ID(dp) ((dp)[1])
-#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN 4
-
-#define CCP_OPT_CODE(dp) ((dp)[0])
-#define CCP_OPT_LENGTH(dp) ((dp)[1])
-#define CCP_OPT_MINLEN 2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS 3 /* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
-#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
-#define BSD_CURRENT_VERSION 1 /* current version number */
-#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
-
-#define BSD_MIN_BITS 9 /* smallest code size supported */
-#define BSD_MAX_BITS 15 /* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE 26 /* config option for Deflate */
-#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
-#define CILEN_DEFLATE 4 /* length of its config option */
-
-#define DEFLATE_MIN_SIZE 9
-#define DEFLATE_MAX_SIZE 15
-#define DEFLATE_METHOD_VAL 8
-#define DEFLATE_SIZE(x) (((x) >> 4) + 8)
-#define DEFLATE_METHOD(x) ((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE 0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE 18 /* config option for MPPE */
-#define CILEN_MPPE 6 /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#ifdef __KERNEL__
extern int ppp_register_compressor(struct compressor *);
extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
#endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/linux/ppp-ioctl.h
deleted file mode 100644
index 2d9a885..0000000
--- a/include/linux/ppp-ioctl.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * ppp-ioctl.h - PPP ioctl definitions.
- *
- * Copyright 1999-2002 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-#ifndef _PPP_IOCTL_H
-#define _PPP_IOCTL_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/*
- * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS.
- */
-#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */
-#define SC_COMP_AC 0x00000002 /* header compression (output) */
-#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */
-#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */
-#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */
-#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */
-#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */
-#define SC_COMP_RUN 0x00001000 /* compressor has been inited */
-#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */
-#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */
-#define SC_DEBUG 0x00010000 /* enable debug messages */
-#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */
-#define SC_LOG_RAWIN 0x00080000 /* log all chars received */
-#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */
-#define SC_SYNC 0x00200000 /* synchronous serial mode */
-#define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */
-#define SC_MASK 0x0f600fff /* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */
-#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */
-#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */
-#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR 0x00800000 /* fatal decomp error detected */
-#define SC_DC_ERROR 0x00400000 /* non-fatal decomp error detected */
-
-/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */
-struct npioctl {
- int protocol; /* PPP protocol, e.g. PPP_IP */
- enum NPmode mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
- __u8 __user *ptr;
- __u32 length;
- int transmit;
-};
-
-/* For PPPIOCGL2TPSTATS */
-struct pppol2tp_ioc_stats {
- __u16 tunnel_id; /* redundant */
- __u16 session_id; /* if zero, get tunnel stats */
- __u32 using_ipsec:1; /* valid only for session_id == 0 */
- __aligned_u64 tx_packets;
- __aligned_u64 tx_bytes;
- __aligned_u64 tx_errors;
- __aligned_u64 rx_packets;
- __aligned_u64 rx_bytes;
- __aligned_u64 rx_seq_discards;
- __aligned_u64 rx_oos_packets;
- __aligned_u64 rx_errors;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */
-#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */
-#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */
-#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */
-#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */
-#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */
-#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */
-#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */
-#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */
-#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */
-#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */
-#define PPPIOCSPASS _IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE _IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */
-#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */
-#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */
-#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */
-#define PPPIOCDETACH _IOW('t', 60, int) /* detach from ppp unit/chan */
-#define PPPIOCSMRRU _IOW('t', 59, int) /* set multilink MRU */
-#define PPPIOCCONNECT _IOW('t', 58, int) /* connect channel to unit */
-#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */
-#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */
-#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */
-#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
-
-#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */
-#define SIOCGPPPCSTATS (SIOCDEVPRIVATE + 2)
-
-#endif /* _PPP_IOCTL_H */
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index ba416f6..28aa023 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -7,148 +7,11 @@
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
-#include <linux/types.h>
-
#ifndef _PPP_DEFS_H_
#define _PPP_DEFS_H_
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN 4 /* octets for standard ppp header */
-#define PPP_FCSLEN 2 /* octets for FCS */
-#define PPP_MRU 1500 /* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p) (((__u8 *)(p))[0])
-#define PPP_CONTROL(p) (((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
-#define PPP_UI 0x03 /* Unnumbered Information */
-#define PPP_FLAG 0x7e /* Flag Sequence */
-#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */
-#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP 0x21 /* Internet Protocol */
-#define PPP_AT 0x29 /* AppleTalk Protocol */
-#define PPP_IPX 0x2b /* IPX protocol */
-#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
-#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
-#define PPP_MP 0x3d /* Multilink protocol */
-#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
-#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */
-#define PPP_COMP 0xfd /* compressed packet */
-#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP 0x8021 /* IP Control Protocol */
-#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
-#define PPP_IPXCP 0x802b /* IPX Control Protocol */
-#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
-#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */
-#define PPP_CCP 0x80fd /* Compression Control Protocol */
-#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */
-#define PPP_LCP 0xc021 /* Link Control Protocol */
-#define PPP_PAP 0xc023 /* Password Authentication Protocol */
-#define PPP_LQR 0xc025 /* Link Quality Report protocol */
-#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP 0xc029 /* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS 0xffff /* Initial FCS value */
-#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */
-
-#ifdef __KERNEL__
#include <linux/crc-ccitt.h>
-#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32 ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
- NPMODE_PASS, /* pass the packet through */
- NPMODE_DROP, /* silently drop the packet */
- NPMODE_ERROR, /* return an error */
- NPMODE_QUEUE /* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat {
- __u32 ppp_discards; /* # frames discarded */
-
- __u32 ppp_ibytes; /* bytes received */
- __u32 ppp_ioctects; /* bytes received not in error */
- __u32 ppp_ipackets; /* packets received */
- __u32 ppp_ierrors; /* receive errors */
- __u32 ppp_ilqrs; /* # LQR frames received */
-
- __u32 ppp_obytes; /* raw bytes sent */
- __u32 ppp_ooctects; /* frame bytes sent */
- __u32 ppp_opackets; /* packets sent */
- __u32 ppp_oerrors; /* transmit errors */
- __u32 ppp_olqrs; /* # LQR frames sent */
-};
-
-struct vjstat {
- __u32 vjs_packets; /* outbound packets */
- __u32 vjs_compressed; /* outbound compressed packets */
- __u32 vjs_searches; /* searches for connection state */
- __u32 vjs_misses; /* times couldn't find conn. state */
- __u32 vjs_uncompressedin; /* inbound uncompressed packets */
- __u32 vjs_compressedin; /* inbound compressed packets */
- __u32 vjs_errorin; /* inbound unknown type packets */
- __u32 vjs_tossed; /* inbound packets tossed because of error */
-};
-
-struct compstat {
- __u32 unc_bytes; /* total uncompressed bytes */
- __u32 unc_packets; /* total uncompressed packets */
- __u32 comp_bytes; /* compressed bytes */
- __u32 comp_packets; /* compressed packets */
- __u32 inc_bytes; /* incompressible bytes */
- __u32 inc_packets; /* incompressible packets */
-
- /* the compression ratio is defined as in_count / bytes_out */
- __u32 in_count; /* Bytes received */
- __u32 bytes_out; /* Bytes transmitted */
-
- double ratio; /* not computed in kernel. */
-};
-
-struct ppp_stats {
- struct pppstat p; /* basic PPP statistics */
- struct vjstat vj; /* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
- struct compstat c; /* packet compression statistics */
- struct compstat d; /* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
- __kernel_time_t xmit_idle; /* time since last NP packet sent */
- __kernel_time_t recv_idle; /* time since last NP packet received */
-};
+#include <uapi/linux/ppp_defs.h>
+#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
#endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/pps.h b/include/linux/pps.h
deleted file mode 100644
index a9bb1d9..0000000
--- a/include/linux/pps.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * PPS API header
- *
- * Copyright (C) 2005-2009 Rodolfo Giometti <giometti@linux.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifndef _PPS_H_
-#define _PPS_H_
-
-#include <linux/types.h>
-
-#define PPS_VERSION "5.3.6"
-#define PPS_MAX_SOURCES 16 /* should be enough... */
-
-/* Implementation note: the logical states ``assert'' and ``clear''
- * are implemented in terms of the chip register, i.e. ``assert''
- * means the bit is set. */
-
-/*
- * 3.2 New data structures
- */
-
-#define PPS_API_VERS_1 1
-#define PPS_API_VERS PPS_API_VERS_1 /* we use API version 1 */
-#define PPS_MAX_NAME_LEN 32
-
-/* 32-bit vs. 64-bit compatibility.
- *
- * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
- * architectures it's 8 bytes. On i386, there will be no padding between the
- * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
- * pps_kparams. But on most platforms there will be padding to ensure correct
- * alignment.
- *
- * The simple fix is probably to add an explicit padding.
- * [David Woodhouse]
- */
-struct pps_ktime {
- __s64 sec;
- __s32 nsec;
- __u32 flags;
-};
-#define PPS_TIME_INVALID (1<<0) /* used to specify timeout==NULL */
-
-struct pps_kinfo {
- __u32 assert_sequence; /* seq. num. of assert event */
- __u32 clear_sequence; /* seq. num. of clear event */
- struct pps_ktime assert_tu; /* time of assert event */
- struct pps_ktime clear_tu; /* time of clear event */
- int current_mode; /* current mode bits */
-};
-
-struct pps_kparams {
- int api_version; /* API version # */
- int mode; /* mode bits */
- struct pps_ktime assert_off_tu; /* offset compensation for assert */
- struct pps_ktime clear_off_tu; /* offset compensation for clear */
-};
-
-/*
- * 3.3 Mode bit definitions
- */
-
-/* Device/implementation parameters */
-#define PPS_CAPTUREASSERT 0x01 /* capture assert events */
-#define PPS_CAPTURECLEAR 0x02 /* capture clear events */
-#define PPS_CAPTUREBOTH 0x03 /* capture assert and clear events */
-
-#define PPS_OFFSETASSERT 0x10 /* apply compensation for assert ev. */
-#define PPS_OFFSETCLEAR 0x20 /* apply compensation for clear ev. */
-
-#define PPS_CANWAIT 0x100 /* can we wait for an event? */
-#define PPS_CANPOLL 0x200 /* bit reserved for future use */
-
-/* Kernel actions */
-#define PPS_ECHOASSERT 0x40 /* feed back assert event to output */
-#define PPS_ECHOCLEAR 0x80 /* feed back clear event to output */
-
-/* Timestamp formats */
-#define PPS_TSFMT_TSPEC 0x1000 /* select timespec format */
-#define PPS_TSFMT_NTPFP 0x2000 /* select NTP format */
-
-/*
- * 3.4.4 New functions: disciplining the kernel timebase
- */
-
-/* Kernel consumers */
-#define PPS_KC_HARDPPS 0 /* hardpps() (or equivalent) */
-#define PPS_KC_HARDPPS_PLL 1 /* hardpps() constrained to
- use a phase-locked loop */
-#define PPS_KC_HARDPPS_FLL 2 /* hardpps() constrained to
- use a frequency-locked loop */
-/*
- * Here begins the implementation-specific part!
- */
-
-struct pps_fdata {
- struct pps_kinfo info;
- struct pps_ktime timeout;
-};
-
-struct pps_bind_args {
- int tsformat; /* format of time stamps */
- int edge; /* selected event type */
- int consumer; /* selected kernel consumer */
-};
-
-#include <linux/ioctl.h>
-
-#define PPS_GETPARAMS _IOR('p', 0xa1, struct pps_kparams *)
-#define PPS_SETPARAMS _IOW('p', 0xa2, struct pps_kparams *)
-#define PPS_GETCAP _IOR('p', 0xa3, int *)
-#define PPS_FETCH _IOWR('p', 0xa4, struct pps_fdata *)
-#define PPS_KC_BIND _IOW('p', 0xa5, struct pps_bind_args *)
-
-#endif /* _PPS_H_ */
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
deleted file mode 100644
index 289760f..0000000
--- a/include/linux/prctl.h
+++ /dev/null
@@ -1,152 +0,0 @@
-#ifndef _LINUX_PRCTL_H
-#define _LINUX_PRCTL_H
-
-/* Values to pass as first argument to prctl() */
-
-#define PR_SET_PDEATHSIG 1 /* Second arg is a signal */
-#define PR_GET_PDEATHSIG 2 /* Second arg is a ptr to return the signal */
-
-/* Get/set current->mm->dumpable */
-#define PR_GET_DUMPABLE 3
-#define PR_SET_DUMPABLE 4
-
-/* Get/set unaligned access control bits (if meaningful) */
-#define PR_GET_UNALIGN 5
-#define PR_SET_UNALIGN 6
-# define PR_UNALIGN_NOPRINT 1 /* silently fix up unaligned user accesses */
-# define PR_UNALIGN_SIGBUS 2 /* generate SIGBUS on unaligned user access */
-
-/* Get/set whether or not to drop capabilities on setuid() away from
- * uid 0 (as per security/commoncap.c) */
-#define PR_GET_KEEPCAPS 7
-#define PR_SET_KEEPCAPS 8
-
-/* Get/set floating-point emulation control bits (if meaningful) */
-#define PR_GET_FPEMU 9
-#define PR_SET_FPEMU 10
-# define PR_FPEMU_NOPRINT 1 /* silently emulate fp operations accesses */
-# define PR_FPEMU_SIGFPE 2 /* don't emulate fp operations, send SIGFPE instead */
-
-/* Get/set floating-point exception mode (if meaningful) */
-#define PR_GET_FPEXC 11
-#define PR_SET_FPEXC 12
-# define PR_FP_EXC_SW_ENABLE 0x80 /* Use FPEXC for FP exception enables */
-# define PR_FP_EXC_DIV 0x010000 /* floating point divide by zero */
-# define PR_FP_EXC_OVF 0x020000 /* floating point overflow */
-# define PR_FP_EXC_UND 0x040000 /* floating point underflow */
-# define PR_FP_EXC_RES 0x080000 /* floating point inexact result */
-# define PR_FP_EXC_INV 0x100000 /* floating point invalid operation */
-# define PR_FP_EXC_DISABLED 0 /* FP exceptions disabled */
-# define PR_FP_EXC_NONRECOV 1 /* async non-recoverable exc. mode */
-# define PR_FP_EXC_ASYNC 2 /* async recoverable exception mode */
-# define PR_FP_EXC_PRECISE 3 /* precise exception mode */
-
-/* Get/set whether we use statistical process timing or accurate timestamp
- * based process timing */
-#define PR_GET_TIMING 13
-#define PR_SET_TIMING 14
-# define PR_TIMING_STATISTICAL 0 /* Normal, traditional,
- statistical process timing */
-# define PR_TIMING_TIMESTAMP 1 /* Accurate timestamp based
- process timing */
-
-#define PR_SET_NAME 15 /* Set process name */
-#define PR_GET_NAME 16 /* Get process name */
-
-/* Get/set process endian */
-#define PR_GET_ENDIAN 19
-#define PR_SET_ENDIAN 20
-# define PR_ENDIAN_BIG 0
-# define PR_ENDIAN_LITTLE 1 /* True little endian mode */
-# define PR_ENDIAN_PPC_LITTLE 2 /* "PowerPC" pseudo little endian */
-
-/* Get/set process seccomp mode */
-#define PR_GET_SECCOMP 21
-#define PR_SET_SECCOMP 22
-
-/* Get/set the capability bounding set (as per security/commoncap.c) */
-#define PR_CAPBSET_READ 23
-#define PR_CAPBSET_DROP 24
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
-
-/* Get/set securebits (as per security/commoncap.c) */
-#define PR_GET_SECUREBITS 27
-#define PR_SET_SECUREBITS 28
-
-/*
- * Get/set the timerslack as used by poll/select/nanosleep
- * A value of 0 means "use default"
- */
-#define PR_SET_TIMERSLACK 29
-#define PR_GET_TIMERSLACK 30
-
-#define PR_TASK_PERF_EVENTS_DISABLE 31
-#define PR_TASK_PERF_EVENTS_ENABLE 32
-
-/*
- * Set early/late kill mode for hwpoison memory corruption.
- * This influences when the process gets killed on a memory corruption.
- */
-#define PR_MCE_KILL 33
-# define PR_MCE_KILL_CLEAR 0
-# define PR_MCE_KILL_SET 1
-
-# define PR_MCE_KILL_LATE 0
-# define PR_MCE_KILL_EARLY 1
-# define PR_MCE_KILL_DEFAULT 2
-
-#define PR_MCE_KILL_GET 34
-
-/*
- * Tune up process memory map specifics.
- */
-#define PR_SET_MM 35
-# define PR_SET_MM_START_CODE 1
-# define PR_SET_MM_END_CODE 2
-# define PR_SET_MM_START_DATA 3
-# define PR_SET_MM_END_DATA 4
-# define PR_SET_MM_START_STACK 5
-# define PR_SET_MM_START_BRK 6
-# define PR_SET_MM_BRK 7
-# define PR_SET_MM_ARG_START 8
-# define PR_SET_MM_ARG_END 9
-# define PR_SET_MM_ENV_START 10
-# define PR_SET_MM_ENV_END 11
-# define PR_SET_MM_AUXV 12
-# define PR_SET_MM_EXE_FILE 13
-
-/*
- * Set specific pid that is allowed to ptrace the current task.
- * A value of 0 mean "no process".
- */
-#define PR_SET_PTRACER 0x59616d61
-# define PR_SET_PTRACER_ANY ((unsigned long)-1)
-
-#define PR_SET_CHILD_SUBREAPER 36
-#define PR_GET_CHILD_SUBREAPER 37
-
-/*
- * If no_new_privs is set, then operations that grant new privileges (i.e.
- * execve) will either fail or not grant them. This affects suid/sgid,
- * file capabilities, and LSMs.
- *
- * Operations that merely manipulate or drop existing privileges (setresuid,
- * capset, etc.) will still work. Drop those privileges if you want them gone.
- *
- * Changing LSM security domain is considered a new privilege. So, for example,
- * asking selinux for a specific new context (e.g. with runcon) will result
- * in execve returning -EPERM.
- *
- * See Documentation/prctl/no_new_privs.txt for more details.
- */
-#define PR_SET_NO_NEW_PRIVS 38
-#define PR_GET_NO_NEW_PRIVS 39
-
-#define PR_GET_TID_ADDRESS 40
-
-#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/ptp_clock.h b/include/linux/ptp_clock.h
deleted file mode 100644
index 94e981f..0000000
--- a/include/linux/ptp_clock.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * PTP 1588 clock support - user space interface
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PTP_CLOCK_H_
-#define _PTP_CLOCK_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* PTP_xxx bits, for the flags field within the request structures. */
-#define PTP_ENABLE_FEATURE (1<<0)
-#define PTP_RISING_EDGE (1<<1)
-#define PTP_FALLING_EDGE (1<<2)
-
-/*
- * struct ptp_clock_time - represents a time value
- *
- * The sign of the seconds field applies to the whole value. The
- * nanoseconds field is always unsigned. The reserved field is
- * included for sub-nanosecond resolution, should the demand for
- * this ever appear.
- *
- */
-struct ptp_clock_time {
- __s64 sec; /* seconds */
- __u32 nsec; /* nanoseconds */
- __u32 reserved;
-};
-
-struct ptp_clock_caps {
- int max_adj; /* Maximum frequency adjustment in parts per billon. */
- int n_alarm; /* Number of programmable alarms. */
- int n_ext_ts; /* Number of external time stamp channels. */
- int n_per_out; /* Number of programmable periodic signals. */
- int pps; /* Whether the clock supports a PPS callback. */
- int rsv[15]; /* Reserved for future use. */
-};
-
-struct ptp_extts_request {
- unsigned int index; /* Which channel to configure. */
- unsigned int flags; /* Bit field for PTP_xxx flags. */
- unsigned int rsv[2]; /* Reserved for future use. */
-};
-
-struct ptp_perout_request {
- struct ptp_clock_time start; /* Absolute start time. */
- struct ptp_clock_time period; /* Desired period, zero means disable. */
- unsigned int index; /* Which channel to configure. */
- unsigned int flags; /* Reserved for future use. */
- unsigned int rsv[4]; /* Reserved for future use. */
-};
-
-#define PTP_CLK_MAGIC '='
-
-#define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
-#define PTP_EXTTS_REQUEST _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request)
-#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
-#define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int)
-
-struct ptp_extts_event {
- struct ptp_clock_time t; /* Time event occured. */
- unsigned int index; /* Which channel produced the event. */
- unsigned int flags; /* Reserved for future use. */
- unsigned int rsv[2]; /* Reserved for future use. */
-};
-
-#endif
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 1d24ffa..e0ff468 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -1,83 +1,13 @@
#ifndef _LINUX_PTRACE_H
#define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
-/* has the defines to get at the registers. */
-
-#define PTRACE_TRACEME 0
-#define PTRACE_PEEKTEXT 1
-#define PTRACE_PEEKDATA 2
-#define PTRACE_PEEKUSR 3
-#define PTRACE_POKETEXT 4
-#define PTRACE_POKEDATA 5
-#define PTRACE_POKEUSR 6
-#define PTRACE_CONT 7
-#define PTRACE_KILL 8
-#define PTRACE_SINGLESTEP 9
-
-#define PTRACE_ATTACH 16
-#define PTRACE_DETACH 17
-
-#define PTRACE_SYSCALL 24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions. */
-#define PTRACE_SETOPTIONS 0x4200
-#define PTRACE_GETEVENTMSG 0x4201
-#define PTRACE_GETSIGINFO 0x4202
-#define PTRACE_SETSIGINFO 0x4203
+#include <linux/compiler.h> /* For unlikely. */
+#include <linux/sched.h> /* For struct task_struct. */
+#include <linux/err.h> /* for IS_ERR_VALUE */
+#include <linux/bug.h> /* For BUG_ON. */
+#include <uapi/linux/ptrace.h>
/*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- * struct iovec iov = { buf, len};
- *
- * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET 0x4204
-#define PTRACE_SETREGSET 0x4205
-
-#define PTRACE_SEIZE 0x4206
-#define PTRACE_INTERRUPT 0x4207
-#define PTRACE_LISTEN 0x4208
-
-/* Wait extended result codes for the above trace options. */
-#define PTRACE_EVENT_FORK 1
-#define PTRACE_EVENT_VFORK 2
-#define PTRACE_EVENT_CLONE 3
-#define PTRACE_EVENT_EXEC 4
-#define PTRACE_EVENT_VFORK_DONE 5
-#define PTRACE_EVENT_EXIT 6
-#define PTRACE_EVENT_SECCOMP 7
-/* Extended result codes which enabled by means other than options. */
-#define PTRACE_EVENT_STOP 128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD 1
-#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
-#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
-
-#define PTRACE_O_MASK 0x000000ff
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
-/*
* Ptrace flags
*
* The owner ship rules for task->ptrace which holds the ptrace
@@ -108,12 +38,6 @@
#define PT_BLOCKSTEP_BIT 30
#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT)
-#include <linux/compiler.h> /* For unlikely. */
-#include <linux/sched.h> /* For struct task_struct. */
-#include <linux/err.h> /* for IS_ERR_VALUE */
-#include <linux/bug.h> /* For BUG_ON. */
-
-
extern long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
@@ -416,6 +340,4 @@ extern void ptrace_put_breakpoints(struct task_struct *tsk);
static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* __KERNEL */
-
#endif
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
deleted file mode 100644
index 8b9aee1..0000000
--- a/include/linux/qnx4_fs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Name : qnx4_fs.h
- * Author : Richard Frowijn
- * Function : qnx4 global filesystem definitions
- * History : 23-03-1998 created
- */
-#ifndef _LINUX_QNX4_FS_H
-#define _LINUX_QNX4_FS_H
-
-#include <linux/types.h>
-#include <linux/qnxtypes.h>
-#include <linux/magic.h>
-
-#define QNX4_ROOT_INO 1
-
-#define QNX4_MAX_XTNTS_PER_XBLK 60
-/* for di_status */
-#define QNX4_FILE_USED 0x01
-#define QNX4_FILE_MODIFIED 0x02
-#define QNX4_FILE_BUSY 0x04
-#define QNX4_FILE_LINK 0x08
-#define QNX4_FILE_INODE 0x10
-#define QNX4_FILE_FSYSCLEAN 0x20
-
-#define QNX4_I_MAP_SLOTS 8
-#define QNX4_Z_MAP_SLOTS 64
-#define QNX4_VALID_FS 0x0001 /* Clean fs. */
-#define QNX4_ERROR_FS 0x0002 /* fs has errors. */
-#define QNX4_BLOCK_SIZE 0x200 /* blocksize of 512 bytes */
-#define QNX4_BLOCK_SIZE_BITS 9 /* blocksize shift */
-#define QNX4_DIR_ENTRY_SIZE 0x040 /* dir entry size of 64 bytes */
-#define QNX4_DIR_ENTRY_SIZE_BITS 6 /* dir entry size shift */
-#define QNX4_XBLK_ENTRY_SIZE 0x200 /* xblk entry size */
-#define QNX4_INODES_PER_BLOCK 0x08 /* 512 / 64 */
-
-/* for filenames */
-#define QNX4_SHORT_NAME_MAX 16
-#define QNX4_NAME_MAX 48
-
-/*
- * This is the original qnx4 inode layout on disk.
- */
-struct qnx4_inode_entry {
- char di_fname[QNX4_SHORT_NAME_MAX];
- qnx4_off_t di_size;
- qnx4_xtnt_t di_first_xtnt;
- __le32 di_xblk;
- __le32 di_ftime;
- __le32 di_mtime;
- __le32 di_atime;
- __le32 di_ctime;
- qnx4_nxtnt_t di_num_xtnts;
- qnx4_mode_t di_mode;
- qnx4_muid_t di_uid;
- qnx4_mgid_t di_gid;
- qnx4_nlink_t di_nlink;
- __u8 di_zero[4];
- qnx4_ftype_t di_type;
- __u8 di_status;
-};
-
-struct qnx4_link_info {
- char dl_fname[QNX4_NAME_MAX];
- __le32 dl_inode_blk;
- __u8 dl_inode_ndx;
- __u8 dl_spare[10];
- __u8 dl_status;
-};
-
-struct qnx4_xblk {
- __le32 xblk_next_xblk;
- __le32 xblk_prev_xblk;
- __u8 xblk_num_xtnts;
- __u8 xblk_spare[3];
- __le32 xblk_num_blocks;
- qnx4_xtnt_t xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
- char xblk_signature[8];
- qnx4_xtnt_t xblk_first_xtnt;
-};
-
-struct qnx4_super_block {
- struct qnx4_inode_entry RootDir;
- struct qnx4_inode_entry Inode;
- struct qnx4_inode_entry Boot;
- struct qnx4_inode_entry AltBoot;
-};
-
-#endif
diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h
deleted file mode 100644
index bebbe5c..0000000
--- a/include/linux/qnxtypes.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Name : qnxtypes.h
- * Author : Richard Frowijn
- * Function : standard qnx types
- * History : 22-03-1998 created
- *
- */
-
-#ifndef _QNX4TYPES_H
-#define _QNX4TYPES_H
-
-#include <linux/types.h>
-
-typedef __le16 qnx4_nxtnt_t;
-typedef __u8 qnx4_ftype_t;
-
-typedef struct {
- __le32 xtnt_blk;
- __le32 xtnt_size;
-} qnx4_xtnt_t;
-
-typedef __le16 qnx4_mode_t;
-typedef __le16 qnx4_muid_t;
-typedef __le16 qnx4_mgid_t;
-typedef __le32 qnx4_off_t;
-typedef __le16 qnx4_nlink_t;
-
-#endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcd5721..58fdef12 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -29,146 +29,9 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
-
#ifndef _LINUX_QUOTA_
#define _LINUX_QUOTA_
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__ "dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA 0 /* element used for user quotas */
-#define GRPQUOTA 1 /* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
- "user", /* USRQUOTA */ \
- "group", /* GRPQUOTA */ \
- "undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK 0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON 0x800002 /* turn quotas on */
-#define Q_QUOTAOFF 0x800003 /* turn quotas off */
-#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */
-#define Q_GETINFO 0x800005 /* get information about quota files */
-#define Q_SETINFO 0x800006 /* set information about quota files */
-#define Q_GETQUOTA 0x800007 /* get user quota structure */
-#define Q_SETQUOTA 0x800008 /* set user quota structure */
-
-/* Quota format type IDs */
-#define QFMT_VFS_OLD 1
-#define QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
- QIF_BLIMITS_B = 0,
- QIF_SPACE_B,
- QIF_ILIMITS_B,
- QIF_INODES_B,
- QIF_BTIME_B,
- QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS (1 << QIF_BLIMITS_B)
-#define QIF_SPACE (1 << QIF_SPACE_B)
-#define QIF_ILIMITS (1 << QIF_ILIMITS_B)
-#define QIF_INODES (1 << QIF_INODES_B)
-#define QIF_BTIME (1 << QIF_BTIME_B)
-#define QIF_ITIME (1 << QIF_ITIME_B)
-#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE (QIF_SPACE | QIF_INODES)
-#define QIF_TIMES (QIF_BTIME | QIF_ITIME)
-#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
- __u64 dqb_bhardlimit;
- __u64 dqb_bsoftlimit;
- __u64 dqb_curspace;
- __u64 dqb_ihardlimit;
- __u64 dqb_isoftlimit;
- __u64 dqb_curinodes;
- __u64 dqb_btime;
- __u64 dqb_itime;
- __u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE 1
-#define IIF_IGRACE 2
-#define IIF_FLAGS 4
-#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
- __u64 dqi_bgrace;
- __u64 dqi_igrace;
- __u32 dqi_flags;
- __u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */
-
-enum {
- QUOTA_NL_C_UNSPEC,
- QUOTA_NL_C_WARNING,
- __QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
- QUOTA_NL_A_UNSPEC,
- QUOTA_NL_A_QTYPE,
- QUOTA_NL_A_EXCESS_ID,
- QUOTA_NL_A_WARNING,
- QUOTA_NL_A_DEV_MAJOR,
- QUOTA_NL_A_DEV_MINOR,
- QUOTA_NL_A_CAUSED_ID,
- __QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
@@ -183,6 +46,7 @@ enum {
#include <linux/atomic.h>
#include <linux/uidgid.h>
#include <linux/projid.h>
+#include <uapi/linux/quota.h>
#undef USRQUOTA
#undef GRPQUOTA
@@ -543,5 +407,4 @@ struct quota_module_name {
{QFMT_VFS_V0, "quota_v2"},\
{0, NULL}}
-#endif /* __KERNEL__ */
#endif /* _QUOTA_ */
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
deleted file mode 100644
index 8c4bbde..0000000
--- a/include/linux/radeonfb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __LINUX_RADEONFB_H__
-#define __LINUX_RADEONFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-
-#define ATY_RADEON_LCD_ON 0x00000001
-#define ATY_RADEON_CRT_ON 0x00000002
-
-
-#define FBIO_RADEON_GET_MIRROR _IOR('@', 3, size_t)
-#define FBIO_RADEON_SET_MIRROR _IOW('@', 4, size_t)
-
-#endif
-
diff --git a/include/linux/random.h b/include/linux/random.h
index ac621ce..6330ed4 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -3,50 +3,11 @@
*
* Include file for the random number generator.
*/
-
#ifndef _LINUX_RANDOM_H
#define _LINUX_RANDOM_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
-
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT _IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count. (Superuser only.) */
-#define RNDADDTOENTCNT _IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool. (Superuser only.) */
-#define RNDGETPOOL _IOR( 'R', 0x02, int [2] )
-
-/*
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] )
+#include <uapi/linux/random.h>
-/* Clear entropy count to 0. (Superuser only.) */
-#define RNDZAPENTCNT _IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters. (Superuser only.) */
-#define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-struct rand_pool_info {
- int entropy_count;
- int buf_size;
- __u32 buf[0];
-};
-
-struct rnd_state {
- __u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
extern void add_device_randomness(const void *, unsigned int);
extern void add_input_randomness(unsigned int type, unsigned int code,
@@ -104,6 +65,4 @@ static inline int arch_get_random_int(unsigned int *v)
}
#endif
-#endif /* __KERNEL___ */
-
#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/linux/raw.h
deleted file mode 100644
index 62d543e..0000000
--- a/include/linux/raw.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __LINUX_RAW_H
-#define __LINUX_RAW_H
-
-#include <linux/types.h>
-
-#define RAW_SETBIND _IO( 0xac, 0 )
-#define RAW_GETBIND _IO( 0xac, 1 )
-
-struct raw_config_request
-{
- int raw_minor;
- __u64 block_major;
- __u64 block_minor;
-};
-
-#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
-
-#endif /* __LINUX_RAW_H */
diff --git a/include/linux/rds.h b/include/linux/rds.h
deleted file mode 100644
index 9195095..0000000
--- a/include/linux/rds.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (c) 2008 Oracle. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#ifndef _LINUX_RDS_H
-#define _LINUX_RDS_H
-
-#include <linux/types.h>
-
-#define RDS_IB_ABI_VERSION 0x301
-
-/*
- * setsockopt/getsockopt for SOL_RDS
- */
-#define RDS_CANCEL_SENT_TO 1
-#define RDS_GET_MR 2
-#define RDS_FREE_MR 3
-/* deprecated: RDS_BARRIER 4 */
-#define RDS_RECVERR 5
-#define RDS_CONG_MONITOR 6
-#define RDS_GET_MR_FOR_DEST 7
-
-/*
- * Control message types for SOL_RDS.
- *
- * CMSG_RDMA_ARGS (sendmsg)
- * Request a RDMA transfer to/from the specified
- * memory ranges.
- * The cmsg_data is a struct rds_rdma_args.
- * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
- * Kernel informs application about intended
- * source/destination of a RDMA transfer
- * RDS_CMSG_RDMA_MAP (sendmsg)
- * Application asks kernel to map the given
- * memory range into a IB MR, and send the
- * R_Key along in an RDS extension header.
- * The cmsg_data is a struct rds_get_mr_args,
- * the same as for the GET_MR setsockopt.
- * RDS_CMSG_RDMA_STATUS (recvmsg)
- * Returns the status of a completed RDMA operation.
- */
-#define RDS_CMSG_RDMA_ARGS 1
-#define RDS_CMSG_RDMA_DEST 2
-#define RDS_CMSG_RDMA_MAP 3
-#define RDS_CMSG_RDMA_STATUS 4
-#define RDS_CMSG_CONG_UPDATE 5
-#define RDS_CMSG_ATOMIC_FADD 6
-#define RDS_CMSG_ATOMIC_CSWP 7
-#define RDS_CMSG_MASKED_ATOMIC_FADD 8
-#define RDS_CMSG_MASKED_ATOMIC_CSWP 9
-
-#define RDS_INFO_FIRST 10000
-#define RDS_INFO_COUNTERS 10000
-#define RDS_INFO_CONNECTIONS 10001
-/* 10002 aka RDS_INFO_FLOWS is deprecated */
-#define RDS_INFO_SEND_MESSAGES 10003
-#define RDS_INFO_RETRANS_MESSAGES 10004
-#define RDS_INFO_RECV_MESSAGES 10005
-#define RDS_INFO_SOCKETS 10006
-#define RDS_INFO_TCP_SOCKETS 10007
-#define RDS_INFO_IB_CONNECTIONS 10008
-#define RDS_INFO_CONNECTION_STATS 10009
-#define RDS_INFO_IWARP_CONNECTIONS 10010
-#define RDS_INFO_LAST 10010
-
-struct rds_info_counter {
- uint8_t name[32];
- uint64_t value;
-} __attribute__((packed));
-
-#define RDS_INFO_CONNECTION_FLAG_SENDING 0x01
-#define RDS_INFO_CONNECTION_FLAG_CONNECTING 0x02
-#define RDS_INFO_CONNECTION_FLAG_CONNECTED 0x04
-
-#define TRANSNAMSIZ 16
-
-struct rds_info_connection {
- uint64_t next_tx_seq;
- uint64_t next_rx_seq;
- __be32 laddr;
- __be32 faddr;
- uint8_t transport[TRANSNAMSIZ]; /* null term ascii */
- uint8_t flags;
-} __attribute__((packed));
-
-#define RDS_INFO_MESSAGE_FLAG_ACK 0x01
-#define RDS_INFO_MESSAGE_FLAG_FAST_ACK 0x02
-
-struct rds_info_message {
- uint64_t seq;
- uint32_t len;
- __be32 laddr;
- __be32 faddr;
- __be16 lport;
- __be16 fport;
- uint8_t flags;
-} __attribute__((packed));
-
-struct rds_info_socket {
- uint32_t sndbuf;
- __be32 bound_addr;
- __be32 connected_addr;
- __be16 bound_port;
- __be16 connected_port;
- uint32_t rcvbuf;
- uint64_t inum;
-} __attribute__((packed));
-
-struct rds_info_tcp_socket {
- __be32 local_addr;
- __be16 local_port;
- __be32 peer_addr;
- __be16 peer_port;
- uint64_t hdr_rem;
- uint64_t data_rem;
- uint32_t last_sent_nxt;
- uint32_t last_expected_una;
- uint32_t last_seen_una;
-} __attribute__((packed));
-
-#define RDS_IB_GID_LEN 16
-struct rds_info_rdma_connection {
- __be32 src_addr;
- __be32 dst_addr;
- uint8_t src_gid[RDS_IB_GID_LEN];
- uint8_t dst_gid[RDS_IB_GID_LEN];
-
- uint32_t max_send_wr;
- uint32_t max_recv_wr;
- uint32_t max_send_sge;
- uint32_t rdma_mr_max;
- uint32_t rdma_mr_size;
-};
-
-/*
- * Congestion monitoring.
- * Congestion control in RDS happens at the host connection
- * level by exchanging a bitmap marking congested ports.
- * By default, a process sleeping in poll() is always woken
- * up when the congestion map is updated.
- * With explicit monitoring, an application can have more
- * fine-grained control.
- * The application installs a 64bit mask value in the socket,
- * where each bit corresponds to a group of ports.
- * When a congestion update arrives, RDS checks the set of
- * ports that are now uncongested against the list bit mask
- * installed in the socket, and if they overlap, we queue a
- * cong_notification on the socket.
- *
- * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
- * with the 64bit mask.
- * Congestion updates are received via RDS_CMSG_CONG_UPDATE
- * control messages.
- *
- * The correspondence between bits and ports is
- * 1 << (portnum % 64)
- */
-#define RDS_CONG_MONITOR_SIZE 64
-#define RDS_CONG_MONITOR_BIT(port) (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
-#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
-
-/*
- * RDMA related types
- */
-
-/*
- * This encapsulates a remote memory location.
- * In the current implementation, it contains the R_Key
- * of the remote memory region, and the offset into it
- * (so that the application does not have to worry about
- * alignment).
- */
-typedef uint64_t rds_rdma_cookie_t;
-
-struct rds_iovec {
- uint64_t addr;
- uint64_t bytes;
-};
-
-struct rds_get_mr_args {
- struct rds_iovec vec;
- uint64_t cookie_addr;
- uint64_t flags;
-};
-
-struct rds_get_mr_for_dest_args {
- struct sockaddr_storage dest_addr;
- struct rds_iovec vec;
- uint64_t cookie_addr;
- uint64_t flags;
-};
-
-struct rds_free_mr_args {
- rds_rdma_cookie_t cookie;
- uint64_t flags;
-};
-
-struct rds_rdma_args {
- rds_rdma_cookie_t cookie;
- struct rds_iovec remote_vec;
- uint64_t local_vec_addr;
- uint64_t nr_local;
- uint64_t flags;
- uint64_t user_token;
-};
-
-struct rds_atomic_args {
- rds_rdma_cookie_t cookie;
- uint64_t local_addr;
- uint64_t remote_addr;
- union {
- struct {
- uint64_t compare;
- uint64_t swap;
- } cswp;
- struct {
- uint64_t add;
- } fadd;
- struct {
- uint64_t compare;
- uint64_t swap;
- uint64_t compare_mask;
- uint64_t swap_mask;
- } m_cswp;
- struct {
- uint64_t add;
- uint64_t nocarry_mask;
- } m_fadd;
- };
- uint64_t flags;
- uint64_t user_token;
-};
-
-struct rds_rdma_notify {
- uint64_t user_token;
- int32_t status;
-};
-
-#define RDS_RDMA_SUCCESS 0
-#define RDS_RDMA_REMOTE_ERROR 1
-#define RDS_RDMA_CANCELED 2
-#define RDS_RDMA_DROPPED 3
-#define RDS_RDMA_OTHER_ERROR 4
-
-/*
- * Common set of flags for all RDMA related structs
- */
-#define RDS_RDMA_READWRITE 0x0001
-#define RDS_RDMA_FENCE 0x0002 /* use FENCE for immediate send */
-#define RDS_RDMA_INVALIDATE 0x0004 /* invalidate R_Key after freeing MR */
-#define RDS_RDMA_USE_ONCE 0x0008 /* free MR after use */
-#define RDS_RDMA_DONTWAIT 0x0010 /* Don't wait in SET_BARRIER */
-#define RDS_RDMA_NOTIFY_ME 0x0020 /* Notify when operation completes */
-#define RDS_RDMA_SILENT 0x0040 /* Do not interrupt remote */
-
-#endif /* IB_RDS_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index e0879a7..23b3630 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -1,43 +1,9 @@
#ifndef _LINUX_REBOOT_H
#define _LINUX_REBOOT_H
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define LINUX_REBOOT_MAGIC1 0xfee1dead
-#define LINUX_REBOOT_MAGIC2 672274793
-#define LINUX_REBOOT_MAGIC2A 85072278
-#define LINUX_REBOOT_MAGIC2B 369367448
-#define LINUX_REBOOT_MAGIC2C 537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART Restart system using default command and mode.
- * HALT Stop OS and give system control to ROM monitor, if any.
- * CAD_ON Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF Stop OS and remove all power from system, if possible.
- * RESTART2 Restart system using given command string.
- * SW_SUSPEND Suspend system using software suspend if compiled in.
- * KEXEC Restart system using a previously loaded Linux kernel
- */
-
-#define LINUX_REBOOT_CMD_RESTART 0x01234567
-#define LINUX_REBOOT_CMD_HALT 0xCDEF0123
-#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF
-#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000
-#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC
-#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
-#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
-#define LINUX_REBOOT_CMD_KEXEC 0x45584543
-
-
-#ifdef __KERNEL__
#include <linux/notifier.h>
+#include <uapi/linux/reboot.h>
#define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN
@@ -84,6 +50,4 @@ extern int orderly_poweroff(bool force);
extern void emergency_restart(void);
#include <asm/emergency-restart.h>
-#endif
-
#endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
deleted file mode 100644
index ea3700c..0000000
--- a/include/linux/reiserfs_fs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
- */
-#ifndef _LINUX_REISER_FS_H
-#define _LINUX_REISER_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * include/linux/reiser_fs.h
- *
- * Reiser File System constants and structures
- *
- */
-
-/* ioctl's command */
-#define REISERFS_IOC_UNPACK _IOW(0xCD,1,long)
-/* define following flags to be the same as in ext2, so that chattr(1),
- lsattr(1) will work with us. */
-#define REISERFS_IOC_GETFLAGS FS_IOC_GETFLAGS
-#define REISERFS_IOC_SETFLAGS FS_IOC_SETFLAGS
-#define REISERFS_IOC_GETVERSION FS_IOC_GETVERSION
-#define REISERFS_IOC_SETVERSION FS_IOC_SETVERSION
-
-#endif /* _LINUX_REISER_FS_H */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
deleted file mode 100644
index d8ce17c..0000000
--- a/include/linux/reiserfs_xattr.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- File: linux/reiserfs_xattr.h
-*/
-
-#ifndef _LINUX_REISERFS_XATTR_H
-#define _LINUX_REISERFS_XATTR_H
-
-#include <linux/types.h>
-
-/* Magic value in header */
-#define REISERFS_XATTR_MAGIC 0x52465841 /* "RFXA" */
-
-struct reiserfs_xattr_header {
- __le32 h_magic; /* magic number for identification */
- __le32 h_hash; /* hash of the value */
-};
-
-struct reiserfs_security_handle {
- char *name;
- void *value;
- size_t length;
-};
-
-#endif /* _LINUX_REISERFS_XATTR_H */
diff --git a/include/linux/resource.h b/include/linux/resource.h
index d01c96c..5bc3116 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -1,82 +1,8 @@
#ifndef _LINUX_RESOURCE_H
#define _LINUX_RESOURCE_H
-#include <linux/time.h>
-#include <linux/types.h>
+#include <uapi/linux/resource.h>
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- *
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose. This reduces the chances of that happening.
- */
-#define RUSAGE_SELF 0
-#define RUSAGE_CHILDREN (-1)
-#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */
-#define RUSAGE_THREAD 1 /* only the calling thread */
-
-struct rusage {
- struct timeval ru_utime; /* user time used */
- struct timeval ru_stime; /* system time used */
- long ru_maxrss; /* maximum resident set size */
- long ru_ixrss; /* integral shared memory size */
- long ru_idrss; /* integral unshared data size */
- long ru_isrss; /* integral unshared stack size */
- long ru_minflt; /* page reclaims */
- long ru_majflt; /* page faults */
- long ru_nswap; /* swaps */
- long ru_inblock; /* block input operations */
- long ru_oublock; /* block output operations */
- long ru_msgsnd; /* messages sent */
- long ru_msgrcv; /* messages received */
- long ru_nsignals; /* signals received */
- long ru_nvcsw; /* voluntary context switches */
- long ru_nivcsw; /* involuntary " */
-};
-
-struct rlimit {
- unsigned long rlim_cur;
- unsigned long rlim_max;
-};
-
-#define RLIM64_INFINITY (~0ULL)
-
-struct rlimit64 {
- __u64 rlim_cur;
- __u64 rlim_max;
-};
-
-#define PRIO_MIN (-20)
-#define PRIO_MAX 20
-
-#define PRIO_PROCESS 0
-#define PRIO_PGRP 1
-#define PRIO_USER 2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed.. 8MB seems reasonable.
- */
-#define _STK_LIM (8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
struct task_struct;
@@ -84,6 +10,4 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
int do_prlimit(struct task_struct *tsk, unsigned int resource,
struct rlimit *new_rlim, struct rlimit *old_rlim);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 0ec590b..d901078 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -1,6 +1,3 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
/*
* Copyright (C) 2006 - 2007 Ivo van Doorn
* Copyright (C) 2007 Dmitry Torokhov
@@ -18,92 +15,11 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#ifndef __RFKILL_H
+#define __RFKILL_H
-#include <linux/types.h>
-
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED 0
-#define RFKILL_STATE_UNBLOCKED 1
-#define RFKILL_STATE_HARD_BLOCKED 2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
- RFKILL_TYPE_ALL = 0,
- RFKILL_TYPE_WLAN,
- RFKILL_TYPE_BLUETOOTH,
- RFKILL_TYPE_UWB,
- RFKILL_TYPE_WIMAX,
- RFKILL_TYPE_WWAN,
- RFKILL_TYPE_GPS,
- RFKILL_TYPE_FM,
- NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
- RFKILL_OP_ADD = 0,
- RFKILL_OP_DEL,
- RFKILL_OP_CHANGE,
- RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
- __u32 idx;
- __u8 type;
- __u8 op;
- __u8 soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1 8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC 'R'
-#define RFKILL_IOC_NOINPUT 1
-#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+#include <uapi/linux/rfkill.h>
-/* and that's all userspace gets */
-#ifdef __KERNEL__
/* don't allow anyone to use these in the kernel */
enum rfkill_user_states {
RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED,
@@ -385,6 +301,4 @@ rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* RFKILL_H */
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
deleted file mode 100644
index 5f57f93..0000000
--- a/include/linux/romfs_fs.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __LINUX_ROMFS_FS_H
-#define __LINUX_ROMFS_FS_H
-
-#include <linux/types.h>
-#include <linux/fs.h>
-
-/* The basic structures of the romfs filesystem */
-
-#define ROMBSIZE BLOCK_SIZE
-#define ROMBSBITS BLOCK_SIZE_BITS
-#define ROMBMASK (ROMBSIZE-1)
-#define ROMFS_MAGIC 0x7275
-
-#define ROMFS_MAXFN 128
-
-#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
-#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
-#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
-#define ROMSB_WORD0 __mk4('-','r','o','m')
-#define ROMSB_WORD1 __mk4('1','f','s','-')
-
-/* On-disk "super block" */
-
-struct romfs_super_block {
- __be32 word0;
- __be32 word1;
- __be32 size;
- __be32 checksum;
- char name[0]; /* volume name */
-};
-
-/* On disk inode */
-
-struct romfs_inode {
- __be32 next; /* low 4 bits see ROMFH_ */
- __be32 spec;
- __be32 size;
- __be32 checksum;
- char name[0];
-};
-
-#define ROMFH_TYPE 7
-#define ROMFH_HRD 0
-#define ROMFH_DIR 1
-#define ROMFH_REG 2
-#define ROMFH_SYM 3
-#define ROMFH_BLK 4
-#define ROMFH_CHR 5
-#define ROMFH_SCK 6
-#define ROMFH_FIF 7
-#define ROMFH_EXEC 8
-
-/* Alignment */
-
-#define ROMFH_SIZE 16
-#define ROMFH_PAD (ROMFH_SIZE-1)
-#define ROMFH_MASK (~ROMFH_PAD)
-
-#endif
diff --git a/include/linux/rose.h b/include/linux/rose.h
deleted file mode 100644
index 1fcfe95..0000000
--- a/include/linux/rose.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * These are the public elements of the Linux kernel Rose implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef ROSE_KERNEL_H
-#define ROSE_KERNEL_H
-
-#include <linux/socket.h>
-#include <linux/ax25.h>
-
-#define ROSE_MTU 251
-
-#define ROSE_MAX_DIGIS 6
-
-#define ROSE_DEFER 1
-#define ROSE_T1 2
-#define ROSE_T2 3
-#define ROSE_T3 4
-#define ROSE_IDLE 5
-#define ROSE_QBITINCL 6
-#define ROSE_HOLDBACK 7
-
-#define SIOCRSGCAUSE (SIOCPROTOPRIVATE+0)
-#define SIOCRSSCAUSE (SIOCPROTOPRIVATE+1)
-#define SIOCRSL2CALL (SIOCPROTOPRIVATE+2)
-#define SIOCRSSL2CALL (SIOCPROTOPRIVATE+2)
-#define SIOCRSACCEPT (SIOCPROTOPRIVATE+3)
-#define SIOCRSCLRRT (SIOCPROTOPRIVATE+4)
-#define SIOCRSGL2CALL (SIOCPROTOPRIVATE+5)
-#define SIOCRSGFACILITIES (SIOCPROTOPRIVATE+6)
-
-#define ROSE_DTE_ORIGINATED 0x00
-#define ROSE_NUMBER_BUSY 0x01
-#define ROSE_INVALID_FACILITY 0x03
-#define ROSE_NETWORK_CONGESTION 0x05
-#define ROSE_OUT_OF_ORDER 0x09
-#define ROSE_ACCESS_BARRED 0x0B
-#define ROSE_NOT_OBTAINABLE 0x0D
-#define ROSE_REMOTE_PROCEDURE 0x11
-#define ROSE_LOCAL_PROCEDURE 0x13
-#define ROSE_SHIP_ABSENT 0x39
-
-typedef struct {
- char rose_addr[5];
-} rose_address;
-
-struct sockaddr_rose {
- __kernel_sa_family_t srose_family;
- rose_address srose_addr;
- ax25_address srose_call;
- int srose_ndigis;
- ax25_address srose_digi;
-};
-
-struct full_sockaddr_rose {
- __kernel_sa_family_t srose_family;
- rose_address srose_addr;
- ax25_address srose_call;
- unsigned int srose_ndigis;
- ax25_address srose_digis[ROSE_MAX_DIGIS];
-};
-
-struct rose_route_struct {
- rose_address address;
- unsigned short mask;
- ax25_address neighbour;
- char device[16];
- unsigned char ndigis;
- ax25_address digipeaters[AX25_MAX_DIGIS];
-};
-
-struct rose_cause_struct {
- unsigned char cause;
- unsigned char diagnostic;
-};
-
-struct rose_facilities_struct {
- rose_address source_addr, dest_addr;
- ax25_address source_call, dest_call;
- unsigned char source_ndigis, dest_ndigis;
- ax25_address source_digis[ROSE_MAX_DIGIS];
- ax25_address dest_digis[ROSE_MAX_DIGIS];
- unsigned int rand;
- rose_address fail_addr;
- ax25_address fail_call;
-};
-
-#endif
diff --git a/include/linux/route.h b/include/linux/route.h
deleted file mode 100644
index 6600708..0000000
--- a/include/linux/route.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Global definitions for the IP router interface.
- *
- * Version: @(#)route.h 1.0.3 05/27/93
- *
- * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
- * for the purposes of compatibility only.
- *
- * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * Changes:
- * Mike McLagan : Routing by source
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_ROUTE_H
-#define _LINUX_ROUTE_H
-
-#include <linux/if.h>
-#include <linux/compiler.h>
-
-/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
-struct rtentry {
- unsigned long rt_pad1;
- struct sockaddr rt_dst; /* target address */
- struct sockaddr rt_gateway; /* gateway addr (RTF_GATEWAY) */
- struct sockaddr rt_genmask; /* target network mask (IP) */
- unsigned short rt_flags;
- short rt_pad2;
- unsigned long rt_pad3;
- void *rt_pad4;
- short rt_metric; /* +1 for binary compatibility! */
- char __user *rt_dev; /* forcing the device at add */
- unsigned long rt_mtu; /* per route MTU/Window */
-#ifndef __KERNEL__
-#define rt_mss rt_mtu /* Compatibility :-( */
-#endif
- unsigned long rt_window; /* Window clamping */
- unsigned short rt_irtt; /* Initial RTT */
-};
-
-
-#define RTF_UP 0x0001 /* route usable */
-#define RTF_GATEWAY 0x0002 /* destination is a gateway */
-#define RTF_HOST 0x0004 /* host entry (net otherwise) */
-#define RTF_REINSTATE 0x0008 /* reinstate route after tmout */
-#define RTF_DYNAMIC 0x0010 /* created dyn. (by redirect) */
-#define RTF_MODIFIED 0x0020 /* modified dyn. (by redirect) */
-#define RTF_MTU 0x0040 /* specific MTU for this route */
-#define RTF_MSS RTF_MTU /* Compatibility :-( */
-#define RTF_WINDOW 0x0080 /* per route window clamping */
-#define RTF_IRTT 0x0100 /* Initial round trip time */
-#define RTF_REJECT 0x0200 /* Reject route */
-
-/*
- * <linux/ipv6_route.h> uses RTF values >= 64k
- */
-
-
-
-#endif /* _LINUX_ROUTE_H */
-
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 20ec4d3..9531845c 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -11,102 +11,10 @@
#ifndef _LINUX_RTC_H_
#define _LINUX_RTC_H_
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
- int tm_sec;
- int tm_min;
- int tm_hour;
- int tm_mday;
- int tm_mon;
- int tm_year;
- int tm_wday;
- int tm_yday;
- int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
- unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */
- unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */
- struct rtc_time time; /* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- * pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- * pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
- int pll_ctrl; /* placeholder for fancier control */
- int pll_value; /* get/set correction value */
- int pll_max; /* max +ve (faster) adjustment value */
- int pll_min; /* max -ve (slower) adjustment value */
- int pll_posmult; /* factor for +ve correction */
- int pll_negmult; /* factor for -ve correction */
- long pll_clock; /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
-#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
-#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
-#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
-#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
-#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
-#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
-#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
-
-#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
-#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
-#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */
-#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
-#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
-#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
-#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
-
-#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
-#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */
-#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80 /* Any of the following is active */
-#define RTC_PF 0x40 /* Periodic interrupt */
-#define RTC_AF 0x20 /* Alarm interrupt */
-#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ 8192
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <uapi/linux/rtc.h>
extern int rtc_month_days(unsigned int month, unsigned int year);
extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
@@ -282,6 +190,4 @@ extern int rtc_hctosys_ret;
#define rtc_hctosys_ret -ENODEV
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index db71c4a..7002bbf 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,616 +1,10 @@
#ifndef __LINUX_RTNETLINK_H
#define __LINUX_RTNETLINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR 128
-#define RTNL_FAMILY_IP6MR 129
-#define RTNL_FAMILY_MAX 129
-
-/****
- * Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
- RTM_BASE = 16,
-#define RTM_BASE RTM_BASE
-
- RTM_NEWLINK = 16,
-#define RTM_NEWLINK RTM_NEWLINK
- RTM_DELLINK,
-#define RTM_DELLINK RTM_DELLINK
- RTM_GETLINK,
-#define RTM_GETLINK RTM_GETLINK
- RTM_SETLINK,
-#define RTM_SETLINK RTM_SETLINK
-
- RTM_NEWADDR = 20,
-#define RTM_NEWADDR RTM_NEWADDR
- RTM_DELADDR,
-#define RTM_DELADDR RTM_DELADDR
- RTM_GETADDR,
-#define RTM_GETADDR RTM_GETADDR
-
- RTM_NEWROUTE = 24,
-#define RTM_NEWROUTE RTM_NEWROUTE
- RTM_DELROUTE,
-#define RTM_DELROUTE RTM_DELROUTE
- RTM_GETROUTE,
-#define RTM_GETROUTE RTM_GETROUTE
-
- RTM_NEWNEIGH = 28,
-#define RTM_NEWNEIGH RTM_NEWNEIGH
- RTM_DELNEIGH,
-#define RTM_DELNEIGH RTM_DELNEIGH
- RTM_GETNEIGH,
-#define RTM_GETNEIGH RTM_GETNEIGH
-
- RTM_NEWRULE = 32,
-#define RTM_NEWRULE RTM_NEWRULE
- RTM_DELRULE,
-#define RTM_DELRULE RTM_DELRULE
- RTM_GETRULE,
-#define RTM_GETRULE RTM_GETRULE
-
- RTM_NEWQDISC = 36,
-#define RTM_NEWQDISC RTM_NEWQDISC
- RTM_DELQDISC,
-#define RTM_DELQDISC RTM_DELQDISC
- RTM_GETQDISC,
-#define RTM_GETQDISC RTM_GETQDISC
-
- RTM_NEWTCLASS = 40,
-#define RTM_NEWTCLASS RTM_NEWTCLASS
- RTM_DELTCLASS,
-#define RTM_DELTCLASS RTM_DELTCLASS
- RTM_GETTCLASS,
-#define RTM_GETTCLASS RTM_GETTCLASS
-
- RTM_NEWTFILTER = 44,
-#define RTM_NEWTFILTER RTM_NEWTFILTER
- RTM_DELTFILTER,
-#define RTM_DELTFILTER RTM_DELTFILTER
- RTM_GETTFILTER,
-#define RTM_GETTFILTER RTM_GETTFILTER
-
- RTM_NEWACTION = 48,
-#define RTM_NEWACTION RTM_NEWACTION
- RTM_DELACTION,
-#define RTM_DELACTION RTM_DELACTION
- RTM_GETACTION,
-#define RTM_GETACTION RTM_GETACTION
-
- RTM_NEWPREFIX = 52,
-#define RTM_NEWPREFIX RTM_NEWPREFIX
-
- RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
- RTM_GETANYCAST = 62,
-#define RTM_GETANYCAST RTM_GETANYCAST
-
- RTM_NEWNEIGHTBL = 64,
-#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL
- RTM_GETNEIGHTBL = 66,
-#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL
- RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL
-
- RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
- RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
- RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
- RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
- RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
- RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
- __RTM_MAX,
-#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2)
-
-/*
- Generic structure for encapsulation of optional route information.
- It is reminiscent of sockaddr, but with sa_family replaced
- with attribute type.
- */
-
-struct rtattr {
- unsigned short rta_len;
- unsigned short rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO 4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
- (rta)->rta_len >= sizeof(struct rtattr) && \
- (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \
- (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- * Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
- unsigned char rtm_family;
- unsigned char rtm_dst_len;
- unsigned char rtm_src_len;
- unsigned char rtm_tos;
-
- unsigned char rtm_table; /* Routing table id */
- unsigned char rtm_protocol; /* Routing protocol; see below */
- unsigned char rtm_scope; /* See below */
- unsigned char rtm_type; /* See below */
-
- unsigned rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
- RTN_UNSPEC,
- RTN_UNICAST, /* Gateway or direct route */
- RTN_LOCAL, /* Accept locally */
- RTN_BROADCAST, /* Accept locally as broadcast,
- send as broadcast */
- RTN_ANYCAST, /* Accept locally as broadcast,
- but send as unicast */
- RTN_MULTICAST, /* Multicast route */
- RTN_BLACKHOLE, /* Drop */
- RTN_UNREACHABLE, /* Destination is unreachable */
- RTN_PROHIBIT, /* Administratively prohibited */
- RTN_THROW, /* Not in this table */
- RTN_NAT, /* Translate this address */
- RTN_XRESOLVE, /* Use external resolver */
- __RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC 0
-#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects;
- not used by current IPv4 */
-#define RTPROT_KERNEL 2 /* Route installed by kernel */
-#define RTPROT_BOOT 3 /* Route installed during boot */
-#define RTPROT_STATIC 4 /* Route installed by administrator */
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
- they are just passed from user and back as is.
- It will be used by hypothetical multiple routing daemons.
- Note that protocol values should be standardized in order to
- avoid conflicts.
- */
-
-#define RTPROT_GATED 8 /* Apparently, GateD */
-#define RTPROT_RA 9 /* RDISC/ND router advertisements */
-#define RTPROT_MRT 10 /* Merit MRT */
-#define RTPROT_ZEBRA 11 /* Zebra */
-#define RTPROT_BIRD 12 /* BIRD */
-#define RTPROT_DNROUTED 13 /* DECnet routing daemon */
-#define RTPROT_XORP 14 /* XORP */
-#define RTPROT_NTK 15 /* Netsukuku */
-#define RTPROT_DHCP 16 /* DHCP client */
-
-/* rtm_scope
-
- Really it is not scope, but sort of distance to the destination.
- NOWHERE are reserved for not existing destinations, HOST is our
- local addresses, LINK are destinations, located on directly attached
- link and UNIVERSE is everywhere in the Universe.
-
- Intermediate values are also possible f.e. interior routes
- could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
- RT_SCOPE_UNIVERSE=0,
-/* User defined values */
- RT_SCOPE_SITE=200,
- RT_SCOPE_LINK=253,
- RT_SCOPE_HOST=254,
- RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY 0x100 /* Notify user of route change */
-#define RTM_F_CLONED 0x200 /* This route is cloned */
-#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */
-#define RTM_F_PREFIX 0x800 /* Prefix addresses */
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
- RT_TABLE_UNSPEC=0,
-/* User defined values */
- RT_TABLE_COMPAT=252,
- RT_TABLE_DEFAULT=253,
- RT_TABLE_MAIN=254,
- RT_TABLE_LOCAL=255,
- RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
- RTA_UNSPEC,
- RTA_DST,
- RTA_SRC,
- RTA_IIF,
- RTA_OIF,
- RTA_GATEWAY,
- RTA_PRIORITY,
- RTA_PREFSRC,
- RTA_METRICS,
- RTA_MULTIPATH,
- RTA_PROTOINFO, /* no longer used */
- RTA_FLOW,
- RTA_CACHEINFO,
- RTA_SESSION, /* no longer used */
- RTA_MP_ALGO, /* no longer used */
- RTA_TABLE,
- RTA_MARK,
- __RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
- unsigned short rtnh_len;
- unsigned char rtnh_flags;
- unsigned char rtnh_hops;
- int rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */
-#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */
-#define RTNH_F_ONLINK 4 /* Gateway is forced on link */
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO 4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
- ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
- __u32 rta_clntref;
- __u32 rta_lastuse;
- __s32 rta_expires;
- __u32 rta_error;
- __u32 rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
- __u32 rta_id;
- __u32 rta_ts;
- __u32 rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
- RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
- RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
- RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
- RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
- RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
- RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
- RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
- RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
- RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
- RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
- RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
- RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
- RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
- RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
- RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
- __RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN 0x00000001
-#define RTAX_FEATURE_SACK 0x00000002
-#define RTAX_FEATURE_TIMESTAMP 0x00000004
-#define RTAX_FEATURE_ALLFRAG 0x00000008
-
-struct rta_session {
- __u8 proto;
- __u8 pad1;
- __u16 pad2;
-
- union {
- struct {
- __u16 sport;
- __u16 dport;
- } ports;
-
- struct {
- __u8 type;
- __u8 code;
- __u16 ident;
- } icmpt;
-
- __u32 spi;
- } u;
-};
-
-/****
- * General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
- unsigned char rtgen_family;
-};
-
-/*****************************************************************
- * Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
- unsigned char ifi_family;
- unsigned char __ifi_pad;
- unsigned short ifi_type; /* ARPHRD_* */
- int ifi_index; /* Link index */
- unsigned ifi_flags; /* IFF_* flags */
- unsigned ifi_change; /* IFF_* change mask */
-};
-
-/********************************************************************
- * prefix information
- ****/
-
-struct prefixmsg {
- unsigned char prefix_family;
- unsigned char prefix_pad1;
- unsigned short prefix_pad2;
- int prefix_ifindex;
- unsigned char prefix_type;
- unsigned char prefix_len;
- unsigned char prefix_flags;
- unsigned char prefix_pad3;
-};
-
-enum
-{
- PREFIX_UNSPEC,
- PREFIX_ADDRESS,
- PREFIX_CACHEINFO,
- __PREFIX_MAX
-};
-
-#define PREFIX_MAX (__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
- __u32 preferred_time;
- __u32 valid_time;
-};
-
-
-/*****************************************************************
- * Traffic control messages.
- ****/
-
-struct tcmsg {
- unsigned char tcm_family;
- unsigned char tcm__pad1;
- unsigned short tcm__pad2;
- int tcm_ifindex;
- __u32 tcm_handle;
- __u32 tcm_parent;
- __u32 tcm_info;
-};
-
-enum {
- TCA_UNSPEC,
- TCA_KIND,
- TCA_OPTIONS,
- TCA_STATS,
- TCA_XSTATS,
- TCA_RATE,
- TCA_FCNT,
- TCA_STATS2,
- TCA_STAB,
- __TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- * Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
- unsigned char nduseropt_family;
- unsigned char nduseropt_pad1;
- unsigned short nduseropt_opts_len; /* Total length of options */
- int nduseropt_ifindex;
- __u8 nduseropt_icmp_type;
- __u8 nduseropt_icmp_code;
- unsigned short nduseropt_pad2;
- unsigned int nduseropt_pad3;
- /* Followed by one or more ND options */
-};
-
-enum {
- NDUSEROPT_UNSPEC,
- NDUSEROPT_SRCADDR,
- __NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK 1
-#define RTMGRP_NOTIFY 2
-#define RTMGRP_NEIGH 4
-#define RTMGRP_TC 8
-
-#define RTMGRP_IPV4_IFADDR 0x10
-#define RTMGRP_IPV4_MROUTE 0x20
-#define RTMGRP_IPV4_ROUTE 0x40
-#define RTMGRP_IPV4_RULE 0x80
-
-#define RTMGRP_IPV6_IFADDR 0x100
-#define RTMGRP_IPV6_MROUTE 0x200
-#define RTMGRP_IPV6_ROUTE 0x400
-#define RTMGRP_IPV6_IFINFO 0x800
-
-#define RTMGRP_DECnet_IFADDR 0x1000
-#define RTMGRP_DECnet_ROUTE 0x4000
-
-#define RTMGRP_IPV6_PREFIX 0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
- RTNLGRP_NONE,
-#define RTNLGRP_NONE RTNLGRP_NONE
- RTNLGRP_LINK,
-#define RTNLGRP_LINK RTNLGRP_LINK
- RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY
- RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH RTNLGRP_NEIGH
- RTNLGRP_TC,
-#define RTNLGRP_TC RTNLGRP_TC
- RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR
- RTNLGRP_IPV4_MROUTE,
-#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE
- RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE
- RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE
- RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR
- RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE
- RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE
- RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO
- RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR
- RTNLGRP_NOP2,
- RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE
- RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE
- RTNLGRP_NOP4,
- RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX
- RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE
- RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT
- RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR
- RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE
- RTNLGRP_DCB,
-#define RTNLGRP_DCB RTNLGRP_DCB
- __RTNLGRP_MAX
-};
-#define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
- unsigned char tca_family;
- unsigned char tca__pad1;
- unsigned short tca__pad2;
-};
-#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF (1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
#include <linux/mutex.h>
#include <linux/netdevice.h>
+#include <uapi/linux/rtnetlink.h>
extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
@@ -675,7 +69,4 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct net_device *dev,
int idx);
-#endif /* __KERNEL__ */
-
-
#endif /* __LINUX_RTNETLINK_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd9..c5a0049 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
#ifndef _SCC_H
#define _SCC_H
+#include <uapi/linux/scc.h>
-/* selection of hardware types */
-
-#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE 0x01 /* hardware type for EAGLE card */
-#define PC100 0x02 /* hardware type for PC100 card */
-#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */
-#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
- SIOCSCCRESERVED = SIOCDEVPRIVATE,
- SIOCSCCCFG,
- SIOCSCCINI,
- SIOCSCCCHANINI,
- SIOCSCCSMEM,
- SIOCSCCGKISS,
- SIOCSCCSKISS,
- SIOCSCCGSTAT,
- SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
- PARAM_DATA,
- PARAM_TXDELAY,
- PARAM_PERSIST,
- PARAM_SLOTTIME,
- PARAM_TXTAIL,
- PARAM_FULLDUP,
- PARAM_SOFTDCD, /* was: PARAM_HW */
- PARAM_MUTE, /* ??? */
- PARAM_DTR,
- PARAM_RTS,
- PARAM_SPEED,
- PARAM_ENDDELAY, /* ??? */
- PARAM_GROUP,
- PARAM_IDLE,
- PARAM_MIN,
- PARAM_MAXKEY,
- PARAM_WAIT,
- PARAM_MAXDEFER,
- PARAM_TX,
- PARAM_HWEVENT = 31,
- PARAM_RETURN = 255 /* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
- KISS_DUPLEX_HALF, /* normal CSMA operation */
- KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */
- KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */
- KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF 65535U /* to switch off timers */
-#define NO_SUCH_PARAM 65534U /* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
- HWEV_DCD_ON,
- HWEV_DCD_OFF,
- HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP 0100 /* if set, only tx when all channels clear */
-#define TXGROUP 0200 /* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
- CLK_DPLL, /* normal halfduplex operation */
- CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */
- CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */
- /* modems without clock regeneration */
- CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */
- /* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
- TXS_IDLE, /* Transmitter off, no data pending */
- TXS_BUSY, /* waiting for permission to send / tailtime */
- TXS_ACTIVE, /* Transmitter on, sending data */
- TXS_NEWFRAME, /* reset CRC and send (next) frame */
- TXS_IDLE2, /* Transmitter on, no data pending */
- TXS_WAIT, /* Waiting for Mintime to expire */
- TXS_TIMEOUT /* We had a transmission timeout */
-};
-
-typedef unsigned long io_port; /* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
- long rxints; /* Receiver interrupts */
- long txints; /* Transmitter interrupts */
- long exints; /* External/status interrupts */
- long spints; /* Special receiver interrupts */
-
- long txframes; /* Packets sent */
- long rxframes; /* Number of Frames Actually Received */
- long rxerrs; /* CRC Errors */
- long txerrs; /* KISS errors */
-
- unsigned int nospace; /* "Out of buffers" */
- unsigned int rx_over; /* Receiver Overruns */
- unsigned int tx_under; /* Transmitter Underruns */
-
- unsigned int tx_state; /* Transmitter state */
- int tx_queued; /* tx frames enqueued */
-
- unsigned int maxqueue; /* allocated tx_buffers */
- unsigned int bufsize; /* used buffersize */
-};
-
-struct scc_modem {
- long speed; /* Line speed, bps */
- char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */
- char nrz; /* NRZ instead of NRZI */
-};
-
-struct scc_kiss_cmd {
- int command; /* one of the KISS-Commands defined above */
- unsigned param; /* KISS-Param */
-};
-
-struct scc_hw_config {
- io_port data_a; /* data port channel A */
- io_port ctrl_a; /* control port channel A */
- io_port data_b; /* data port channel B */
- io_port ctrl_b; /* control port channel B */
- io_port vector_latch; /* INTACK-Latch (#) */
- io_port special; /* special function port */
-
- int irq; /* irq */
- long clock; /* clock */
- char option; /* command for function port */
-
- char brand; /* hardware type */
- char escc; /* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
- unsigned int dummy;
- unsigned int bufsize;
-};
-
-struct scc_calibrate {
- unsigned int time;
- unsigned char pattern;
-};
-
-#ifdef __KERNEL__
enum {TX_OFF, TX_ON}; /* command for scc_key_trx() */
@@ -248,5 +82,4 @@ struct scc_channel {
spinlock_t lock; /* Channel guard lock */
};
-#endif /* defined(__KERNEL__) */
#endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a83ca58..0dd42a0 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1,48 +1,8 @@
#ifndef _LINUX_SCHED_H
#define _LINUX_SCHED_H
-/*
- * cloning flags:
- */
-#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */
-#define CLONE_VM 0x00000100 /* set if VM shared between processes */
-#define CLONE_FS 0x00000200 /* set if fs info shared between processes */
-#define CLONE_FILES 0x00000400 /* set if open files shared between processes */
-#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD 0x00010000 /* Same thread group? */
-#define CLONE_NEWNS 0x00020000 /* New namespace group? */
-#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */
-#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */
-#define CLONE_DETACHED 0x00400000 /* Unused, ignored */
-#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
- and is now available for re-use. */
-#define CLONE_NEWUTS 0x04000000 /* New utsname group? */
-#define CLONE_NEWIPC 0x08000000 /* New ipcs */
-#define CLONE_NEWUSER 0x10000000 /* New user namespace */
-#define CLONE_NEWPID 0x20000000 /* New pid namespace */
-#define CLONE_NEWNET 0x40000000 /* New network namespace */
-#define CLONE_IO 0x80000000 /* Clone io context */
-
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL 0
-#define SCHED_FIFO 1
-#define SCHED_RR 2
-#define SCHED_BATCH 3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE 5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK 0x40000000
+#include <uapi/linux/sched.h>
-#ifdef __KERNEL__
struct sched_param {
int sched_priority;
@@ -2828,6 +2788,4 @@ static inline unsigned long rlimit_max(unsigned int limit)
return task_rlimit_max(current, limit);
}
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index fb3c5a8..005bf3e 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -1,76 +1,8 @@
#ifndef _SCREEN_INFO_H
#define _SCREEN_INFO_H
-#include <linux/types.h>
+#include <uapi/linux/screen_info.h>
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
- __u8 orig_x; /* 0x00 */
- __u8 orig_y; /* 0x01 */
- __u16 ext_mem_k; /* 0x02 */
- __u16 orig_video_page; /* 0x04 */
- __u8 orig_video_mode; /* 0x06 */
- __u8 orig_video_cols; /* 0x07 */
- __u8 flags; /* 0x08 */
- __u8 unused2; /* 0x09 */
- __u16 orig_video_ega_bx;/* 0x0a */
- __u16 unused3; /* 0x0c */
- __u8 orig_video_lines; /* 0x0e */
- __u8 orig_video_isVGA; /* 0x0f */
- __u16 orig_video_points;/* 0x10 */
-
- /* VESA graphic mode -- linear frame buffer */
- __u16 lfb_width; /* 0x12 */
- __u16 lfb_height; /* 0x14 */
- __u16 lfb_depth; /* 0x16 */
- __u32 lfb_base; /* 0x18 */
- __u32 lfb_size; /* 0x1c */
- __u16 cl_magic, cl_offset; /* 0x20 */
- __u16 lfb_linelength; /* 0x24 */
- __u8 red_size; /* 0x26 */
- __u8 red_pos; /* 0x27 */
- __u8 green_size; /* 0x28 */
- __u8 green_pos; /* 0x29 */
- __u8 blue_size; /* 0x2a */
- __u8 blue_pos; /* 0x2b */
- __u8 rsvd_size; /* 0x2c */
- __u8 rsvd_pos; /* 0x2d */
- __u16 vesapm_seg; /* 0x2e */
- __u16 vesapm_off; /* 0x30 */
- __u16 pages; /* 0x32 */
- __u16 vesa_attributes; /* 0x34 */
- __u32 capabilities; /* 0x36 */
- __u8 _reserved[6]; /* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
-#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
-#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
-#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
-#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
-#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
-
-#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */
-#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */
-#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
-
-#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */
-
-#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */
-
-#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0)
-
-#ifdef __KERNEL__
extern struct screen_info screen_info;
#define ORIG_X (screen_info.orig_x)
@@ -81,6 +13,4 @@ extern struct screen_info screen_info;
#define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
#define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
#define ORIG_VIDEO_POINTS (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
#endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 9995c7f..fe7a967 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -19,100 +19,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef SDLA_H
#define SDLA_H
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A 5020
-#define SDLA_S502E 5021
-#define SDLA_S503 5030
-#define SDLA_S507 5070
-#define SDLA_S508 5080
-#define SDLA_S509 5090
-#define SDLA_UNKNOWN -1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35 0x00
-#define SDLA_S508_PORT_RS232 0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M 0x00
-#define SDLA_CPU_5M 0x01
-#define SDLA_CPU_7M 0x02
-#define SDLA_CPU_8M 0x03
-#define SDLA_CPU_10M 0x04
-#define SDLA_CPU_16M 0x05
-#define SDLA_CPU_12M 0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM (FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
- int addr;
- int len;
- void __user *data;
-};
-
-#define SDLA_START (FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP (FRAD_LAST_IOCTL + 8)
+#include <uapi/linux/sdla.h>
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR 0x0000
-#define SDLA_CONF_ADDR 0x0010
-#define SDLA_S502A_NMIADDR 0x0066
-#define SDLA_CODE_BASEADDR 0x0100
-#define SDLA_WINDOW_SIZE 0x2000
-#define SDLA_ADDR_MASK 0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA 4080
-#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI 24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
- short station;
- short config;
- short kbaud;
- short clocking;
- short max_frm;
- short T391;
- short T392;
- short N391;
- short N392;
- short N393;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
- short config;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
- short Tc_fwd;
- short Tc_bwd;
- short Tf_max;
- short Tb_max;
-};
-
-#ifdef __KERNEL__
/* important Z80 window addresses */
#define SDLA_CONTROL_WND 0xE000
@@ -331,5 +242,3 @@ struct buf_entry {
} __attribute__((packed));
#endif
-
-#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 84f6320d..6f19cfd 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,50 +1,8 @@
#ifndef _LINUX_SECCOMP_H
#define _LINUX_SECCOMP_H
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/seccomp.h>
-
-/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
-#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */
-#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */
-#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
-
-/*
- * All BPF programs must return a 32-bit value.
- * The bottom 16-bits are for optional return data.
- * The upper 16-bits are ordered from least permissive values to most.
- *
- * The ordering ensures that a min_t() over composed return values always
- * selects the least permissive choice.
- */
-#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */
-#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
-#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
-#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
-#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
-
-/* Masks for the return value sections. */
-#define SECCOMP_RET_ACTION 0x7fff0000U
-#define SECCOMP_RET_DATA 0x0000ffffU
-
-/**
- * struct seccomp_data - the format the BPF program executes over.
- * @nr: the system call number
- * @arch: indicates system call convention as an AUDIT_ARCH_* value
- * as defined in <linux/audit.h>.
- * @instruction_pointer: at the time of the system call.
- * @args: up to 6 system call arguments always stored as 64-bit values
- * regardless of the architecture.
- */
-struct seccomp_data {
- int nr;
- __u32 arch;
- __u64 instruction_pointer;
- __u64 args[6];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_SECCOMP
#include <linux/thread_info.h>
@@ -129,5 +87,4 @@ static inline void get_seccomp_filter(struct task_struct *tsk)
return;
}
#endif /* CONFIG_SECCOMP_FILTER */
-#endif /* __KERNEL__ */
#endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index 3340617..da1b33b 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,54 +1,7 @@
#ifndef _LINUX_SECUREBITS_H
#define _LINUX_SECUREBITS_H 1
-/* Each securesetting is implemented using two bits. One bit specifies
- whether the setting is on or off. The other bit specify whether the
- setting is locked or not. A setting which is locked cannot be
- changed from user-level. */
-#define issecure_mask(X) (1 << (X))
-#ifdef __KERNEL__
-#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
- inheritance of root-permissions and suid-root executable under
- compatibility mode. We raise the effective and inheritable bitmasks
- *of the executable file* if the effective uid of the new process is
- 0. If the real uid is 0, we raise the effective (legacy) bit of the
- executable file. */
-#define SECURE_NOROOT 0
-#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
-
-#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
- When unset, to provide compatiblility with old programs relying on
- set*uid to gain/lose privilege, transitions to/from uid 0 cause
- capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP 2
-#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
- (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
- transitioning to a non-root user (the set-uid fixup suppressed by
- bit 2). Bit-4 is cleared when a process calls exec(); setting both
- bit 4 and 5 will create a barrier through exec that no exec()'d
- child can use this feature again. */
-#define SECURE_KEEP_CAPS 4
-#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \
- issecure_mask(SECURE_NO_SETUID_FIXUP) | \
- issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1)
+#include <uapi/linux/securebits.h>
+#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits))
#endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/selinux_netlink.h b/include/linux/selinux_netlink.h
deleted file mode 100644
index d239797..0000000
--- a/include/linux/selinux_netlink.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Netlink event notifications for SELinux.
- *
- * Author: James Morris <jmorris@redhat.com>
- *
- * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
- */
-#ifndef _LINUX_SELINUX_NETLINK_H
-#define _LINUX_SELINUX_NETLINK_H
-
-#include <linux/types.h>
-
-/* Message types. */
-#define SELNL_MSG_BASE 0x10
-enum {
- SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
- SELNL_MSG_POLICYLOAD,
- SELNL_MSG_MAX
-};
-
-#ifndef __KERNEL__
-/* Multicast groups - backwards compatiblility for userspace */
-#define SELNL_GRP_NONE 0x00000000
-#define SELNL_GRP_AVC 0x00000001 /* AVC notifications */
-#define SELNL_GRP_ALL 0xffffffff
-#endif
-
-enum selinux_nlgroups {
- SELNLGRP_NONE,
-#define SELNLGRP_NONE SELNLGRP_NONE
- SELNLGRP_AVC,
-#define SELNLGRP_AVC SELNLGRP_AVC
- __SELNLGRP_MAX
-};
-#define SELNLGRP_MAX (__SELNLGRP_MAX - 1)
-
-/* Message structures */
-struct selnl_msg_setenforce {
- __s32 val;
-};
-
-struct selnl_msg_policyload {
- __u32 seqno;
-};
-
-#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 10d6b22..53d4265 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -1,85 +1,10 @@
#ifndef _LINUX_SEM_H
#define _LINUX_SEM_H
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO 0x1000 /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID 11 /* get sempid */
-#define GETVAL 12 /* get semval */
-#define GETALL 13 /* get all semval's */
-#define GETNCNT 14 /* get semncnt */
-#define GETZCNT 15 /* get semzcnt */
-#define SETVAL 16 /* set semval */
-#define SETALL 17 /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
- struct ipc_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- __kernel_time_t sem_ctime; /* last change time */
- struct sem *sem_base; /* ptr to first semaphore in array */
- struct sem_queue *sem_pending; /* pending operations to be processed */
- struct sem_queue **sem_pending_last; /* last pending operation */
- struct sem_undo *undo; /* undo requests on this array */
- unsigned short sem_nsems; /* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
- unsigned short sem_num; /* semaphore index in array */
- short sem_op; /* semaphore operation */
- short sem_flg; /* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
- int val; /* value for SETVAL */
- struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */
- unsigned short __user *array; /* array for GETALL & SETALL */
- struct seminfo __user *__buf; /* buffer for IPC_INFO */
- void __user *__pad;
-};
-
-struct seminfo {
- int semmap;
- int semmni;
- int semmns;
- int semmnu;
- int semmsl;
- int semopm;
- int semume;
- int semusz;
- int semvmx;
- int semaem;
-};
-
-#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */
-#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */
-#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */
-#define SEMVMX 32767 /* <= 32767 semaphore maximum value */
-#define SEMAEM SEMVMX /* adjust on exit max value */
-
-/* unused */
-#define SEMUME SEMOPM /* max num of undo entries per process */
-#define SEMMNU SEMMNS /* num of undo structures system wide */
-#define SEMMAP SEMMNS /* # of entries in semaphore map */
-#define SEMUSZ 20 /* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
#include <linux/rcupdate.h>
#include <linux/cache.h>
+#include <uapi/linux/sem.h>
struct task_struct;
@@ -122,6 +47,4 @@ static inline void exit_sem(struct task_struct *tsk)
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SEM_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51d..0916107 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
* Redistribution of this file is permitted under the terms of the GNU
* Public License (GPL)
*/
-
#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
#include <asm/page.h>
+#include <uapi/linux/serial.h>
/*
@@ -33,118 +28,6 @@ struct async_icount {
*/
#define SERIAL_XMIT_SIZE PAGE_SIZE
-#endif
-
-struct serial_struct {
- int type;
- int line;
- unsigned int port;
- int irq;
- int flags;
- int xmit_fifo_size;
- int custom_divisor;
- int baud_base;
- unsigned short close_delay;
- char io_type;
- char reserved_char[1];
- int hub6;
- unsigned short closing_wait; /* time to wait before closing */
- unsigned short closing_wait2; /* no longer used... */
- unsigned char *iomem_base;
- unsigned short iomem_reg_shift;
- unsigned int port_high;
- unsigned long iomap_base; /* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output. 65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF 0
-#define ASYNC_CLOSING_WAIT_NONE 65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN 0
-#define PORT_8250 1
-#define PORT_16450 2
-#define PORT_16550 3
-#define PORT_16550A 4
-#define PORT_CIRRUS 5 /* usurped by cyclades.c */
-#define PORT_16650 6
-#define PORT_16650V2 7
-#define PORT_16750 8
-#define PORT_STARTECH 9 /* usurped by cyclades.c */
-#define PORT_16C950 10 /* Oxford Semiconductor */
-#define PORT_16654 11
-#define PORT_16850 12
-#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
-
-#define SERIAL_IO_PORT 0
-#define SERIAL_IO_HUB6 1
-#define SERIAL_IO_MEM 2
-
-#define UART_CLEAR_FIFO 0x01
-#define UART_USE_FIFO 0x02
-#define UART_STARTECH 0x04
-#define UART_NATSEMI 0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
- int irq;
- int port1;
- unsigned char mask1, match1;
- int port2;
- unsigned char mask2, match2;
- int port3;
- unsigned char mask3, match3;
- int port4;
- unsigned char mask4, match4;
- int port_monitor;
- int reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
- int cts, dsr, rng, dcd;
- int rx, tx;
- int frame, overrun, parity, brk;
- int buf_overrun;
- int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
- __u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0) /* If enabled */
-#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
- RTS pin when
- sending */
-#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
- RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
- __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
- __u32 padding[5]; /* Memory is cheap, new structs
- are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
-#endif /* __KERNEL__ */
#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f9b22ec..3c43022 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,202 +20,6 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
-#include <linux/serial.h>
-
-/*
- * The type definitions. These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN 0
-#define PORT_8250 1
-#define PORT_16450 2
-#define PORT_16550 3
-#define PORT_16550A 4
-#define PORT_CIRRUS 5
-#define PORT_16650 6
-#define PORT_16650V2 7
-#define PORT_16750 8
-#define PORT_STARTECH 9
-#define PORT_16C950 10
-#define PORT_16654 11
-#define PORT_16850 12
-#define PORT_RSA 13
-#define PORT_NS16550A 14
-#define PORT_XSCALE 15
-#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
-#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
-#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
-#define PORT_MAX_8250 23 /* max port ID */
-
-/*
- * ARM specific type numbers. These are not currently guaranteed
- * to be implemented, and will change in the future. These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA 31
-#define PORT_AMBA 32
-#define PORT_CLPS711X 33
-#define PORT_SA1100 34
-#define PORT_UART00 35
-#define PORT_21285 37
-
-/* Sparc type numbers. */
-#define PORT_SUNZILOG 38
-#define PORT_SUNSAB 39
-
-/* DEC */
-#define PORT_DZ 46
-#define PORT_ZS 47
-
-/* Parisc type numbers. */
-#define PORT_MUX 48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL 49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG 51
-
-/* SH-SCI */
-#define PORT_SCI 52
-#define PORT_SCIF 53
-#define PORT_IRDA 54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410 55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG 56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X 57
-
-/* PPC CPM type number */
-#define PORT_CPM 58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx 59
-
-/* IBM icom */
-#define PORT_ICOM 60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440 61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX 62
-
-/* Marvell MPSC */
-#define PORT_MPSC 63
-
-/* TXX9 type number */
-#define PORT_TXX9 64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU 65
-#define PORT_VR41XX_DSIU 66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400 67
-
-/* M32R SIO */
-#define PORT_M32R_SIO 68
-
-/*Digi jsm */
-#define PORT_JSM 69
-
-#define PORT_PNX8XXX 70
-
-/* Hilscher netx */
-#define PORT_NETX 71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV 72
-
-#define PORT_S3C2412 73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE 74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN 75
-
-/* Micrel KS8695 */
-#define PORT_KS8695 76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART 77
-
-/* Freescale ColdFire */
-#define PORT_MCF 78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT 79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300 80
-#define PORT_MN10300_CTS 81
-
-#define PORT_SC26XX 82
-
-/* SH-SCI */
-#define PORT_SCIFA 83
-
-#define PORT_S3C6400 84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL 85
-
-/* MAX3100 */
-#define PORT_MAX3100 86
-
-/* Timberdale UART */
-#define PORT_TIMBUART 87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM 88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX 89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART 90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART 91
-#define PORT_ALTERA_UART 92
-
-/* SH-SCI */
-#define PORT_SCIFB 93
-
-/* MAX310X */
-#define PORT_MAX310X 94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD 95
-
-/* TI OMAP-UART */
-#define PORT_OMAP 96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500 97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS 98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X 99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART 100
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/interrupt.h>
@@ -226,6 +30,7 @@
#include <linux/mutex.h>
#include <linux/sysrq.h>
#include <linux/pps_kernel.h>
+#include <uapi/linux/serial_core.h>
struct uart_port;
struct serial_struct;
@@ -562,6 +367,4 @@ static inline int uart_handle_break(struct uart_port *port)
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
-#endif
-
#endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
deleted file mode 100644
index 5ed325e..0000000
--- a/include/linux/serial_reg.h
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * include/linux/serial_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- *
- * These are the UART port assignments, expressed as offsets from the base
- * register. These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _LINUX_SERIAL_REG_H
-#define _LINUX_SERIAL_REG_H
-
-/*
- * DLAB=0
- */
-#define UART_RX 0 /* In: Receive buffer */
-#define UART_TX 0 /* Out: Transmit buffer */
-
-#define UART_IER 1 /* Out: Interrupt Enable Register */
-#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-/*
- * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
- */
-#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
-
-#define UART_IIR 2 /* In: Interrupt ID Register */
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
-
-#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
-#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
-#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
-
-#define UART_FCR 2 /* Out: FIFO Control Register */
-#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-/*
- * Note: The FIFO trigger levels are chip specific:
- * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
- * PC16550D: 1 4 8 14 xx xx xx xx
- * TI16C550A: 1 4 8 14 xx xx xx xx
- * TI16C550C: 1 4 8 14 xx xx xx xx
- * ST16C550: 1 4 8 14 xx xx xx xx
- * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
- * NS16C552: 1 4 8 14 xx xx xx xx
- * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
- * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
- * TI16C752: 8 16 56 60 8 16 32 56
- * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA
- */
-#define UART_FCR_R_TRIG_00 0x00
-#define UART_FCR_R_TRIG_01 0x40
-#define UART_FCR_R_TRIG_10 0x80
-#define UART_FCR_R_TRIG_11 0xc0
-#define UART_FCR_T_TRIG_00 0x00
-#define UART_FCR_T_TRIG_01 0x10
-#define UART_FCR_T_TRIG_10 0x20
-#define UART_FCR_T_TRIG_11 0x30
-
-#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-/* 16650 definitions */
-#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
-#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
-#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
-#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
-#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
-
-#define UART_LCR 3 /* Out: Line Control Register */
-/*
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC 0x40 /* Set break control */
-#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR 0x10 /* Even parity select */
-#define UART_LCR_PARITY 0x08 /* Parity Enable */
-#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
-#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-
-/*
- * Access to some registers depends on register access / configuration
- * mode.
- */
-#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */
-#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */
-
-#define UART_MCR 4 /* Out: Modem Control Register */
-#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
-#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
-#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
-#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2 0x08 /* Out2 complement */
-#define UART_MCR_OUT1 0x04 /* Out1 complement */
-#define UART_MCR_RTS 0x02 /* RTS complement */
-#define UART_MCR_DTR 0x01 /* DTR complement */
-
-#define UART_LSR 5 /* In: Line Status Register */
-#define UART_LSR_FIFOE 0x80 /* Fifo error */
-#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-#define UART_LSR_FE 0x08 /* Frame error indicator */
-#define UART_LSR_PE 0x04 /* Parity error indicator */
-#define UART_LSR_OE 0x02 /* Overrun error indicator */
-#define UART_LSR_DR 0x01 /* Receiver data ready */
-#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */
-
-#define UART_MSR 6 /* In: Modem Status Register */
-#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-#define UART_MSR_RI 0x40 /* Ring Indicator */
-#define UART_MSR_DSR 0x20 /* Data Set Ready */
-#define UART_MSR_CTS 0x10 /* Clear to Send */
-#define UART_MSR_DDCD 0x08 /* Delta DCD */
-#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR 0x02 /* Delta DSR */
-#define UART_MSR_DCTS 0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-#define UART_SCR 7 /* I/O: Scratch Register */
-
-/*
- * DLAB=1
- */
-#define UART_DLL 0 /* Out: Divisor Latch Low */
-#define UART_DLM 1 /* Out: Divisor Latch High */
-
-/*
- * LCR=0xBF (or DLAB=1 for 16C660)
- */
-#define UART_EFR 2 /* I/O: Extended Features Register */
-#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */
-#define UART_EFR_CTS 0x80 /* CTS flow control */
-#define UART_EFR_RTS 0x40 /* RTS flow control */
-#define UART_EFR_SCD 0x20 /* Special character detect */
-#define UART_EFR_ECB 0x10 /* Enhanced control bit */
-/*
- * the low four bits control software flow control
- */
-
-/*
- * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
- */
-#define UART_XON1 4 /* I/O: Xon character 1 */
-#define UART_XON2 5 /* I/O: Xon character 2 */
-#define UART_XOFF1 6 /* I/O: Xoff character 1 */
-#define UART_XOFF2 7 /* I/O: Xoff character 2 */
-
-/*
- * EFR[4]=1 MCR[6]=1, TI16C752
- */
-#define UART_TI752_TCR 6 /* I/O: transmission control register */
-#define UART_TI752_TLR 7 /* I/O: trigger level register */
-
-/*
- * LCR=0xBF, XR16C85x
- */
-#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
- * In: Fifo count
- * Out: Fifo custom trigger levels */
-/*
- * These are the definitions for the Programmable Trigger Register
- */
-#define UART_TRG_1 0x01
-#define UART_TRG_4 0x04
-#define UART_TRG_8 0x08
-#define UART_TRG_16 0x10
-#define UART_TRG_32 0x20
-#define UART_TRG_64 0x40
-#define UART_TRG_96 0x60
-#define UART_TRG_120 0x78
-#define UART_TRG_128 0x80
-
-#define UART_FCTR 1 /* Feature Control Register */
-#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
-#define UART_FCTR_RTS_4DELAY 0x01
-#define UART_FCTR_RTS_6DELAY 0x02
-#define UART_FCTR_RTS_8DELAY 0x03
-#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
-#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
-#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
-#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
-#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
-#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
-#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
-#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
-#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
-
-/*
- * LCR=0xBF, FCTR[6]=1
- */
-#define UART_EMSR 7 /* Extended Mode Select Register */
-#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
-#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
-
-/*
- * The Intel XScale on-chip UARTs define these bits
- */
-#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
-#define UART_IER_UUE 0x40 /* UART Unit Enable */
-#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
-#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
-
-#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
-
-#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */
-#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */
-#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
-#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
-
-/*
- * Intel MID on-chip HSU (High Speed UART) defined bits
- */
-#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */
-#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */
-#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */
-
-#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */
-#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */
-#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */
-
-#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */
-#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */
-
-#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */
-#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */
-
-/*
- * These register definitions are for the 16C950
- */
-#define UART_ASR 0x01 /* Additional Status Register */
-#define UART_RFL 0x03 /* Receiver FIFO level */
-#define UART_TFL 0x04 /* Transmitter FIFO level */
-#define UART_ICR 0x05 /* Index Control Register */
-
-/* The 16950 ICR registers */
-#define UART_ACR 0x00 /* Additional Control Register */
-#define UART_CPR 0x01 /* Clock Prescalar Register */
-#define UART_TCR 0x02 /* Times Clock Register */
-#define UART_CKS 0x03 /* Clock Select Register */
-#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
-#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
-#define UART_FCL 0x06 /* Flow Control Level Lower */
-#define UART_FCH 0x07 /* Flow Control Level Higher */
-#define UART_ID1 0x08 /* ID #1 */
-#define UART_ID2 0x09 /* ID #2 */
-#define UART_ID3 0x0A /* ID #3 */
-#define UART_REV 0x0B /* Revision */
-#define UART_CSR 0x0C /* Channel Software Reset */
-#define UART_NMR 0x0D /* Nine-bit Mode Register */
-#define UART_CTR 0xFF
-
-/*
- * The 16C950 Additional Control Register
- */
-#define UART_ACR_RXDIS 0x01 /* Receiver disable */
-#define UART_ACR_TXDIS 0x02 /* Transmitter disable */
-#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
-#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
-#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
-#define UART_ACR_ASREN 0x80 /* Additional status enable */
-
-
-
-/*
- * These definitions are for the RSA-DV II/S card, from
- *
- * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
- */
-
-#define UART_RSA_BASE (-8)
-
-#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-
-#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-
-#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-
-#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-
-#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-
-#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-
-#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-
-#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-
-#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-
-#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-
-/*
- * The RSA DSV/II board has two fixed clock frequencies. One is the
- * standard rate, and the other is 8 times faster.
- */
-#define SERIAL_RSA_BAUD_BASE (921600)
-#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
-
-/*
- * Extra serial register definitions for the internal UARTs
- * in TI OMAP processors.
- */
-#define UART_OMAP_MDR1 0x08 /* Mode definition register */
-#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
-#define UART_OMAP_SCR 0x10 /* Supplementary control register */
-#define UART_OMAP_SSR 0x11 /* Supplementary status register */
-#define UART_OMAP_EBLR 0x12 /* BOF length register */
-#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
-#define UART_OMAP_MVER 0x14 /* Module version register */
-#define UART_OMAP_SYSC 0x15 /* System configuration register */
-#define UART_OMAP_SYSS 0x16 /* System status register */
-#define UART_OMAP_WER 0x17 /* Wake-up enable register */
-
-/*
- * These are the definitions for the MDR1 register
- */
-#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */
-#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */
-#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */
-#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */
-#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */
-#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */
-#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
-#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */
-
-#endif /* _LINUX_SERIAL_REG_H */
-
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6d6cfd3..36aac73 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -1,6 +1,3 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
/*
* Copyright (C) 1999-2002 Vojtech Pavlik
*
@@ -8,12 +5,9 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _SERIO_H
+#define _SERIO_H
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE _IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -22,6 +16,7 @@
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <uapi/linux/serio.h>
struct serio {
void *port_data;
@@ -152,68 +147,3 @@ static inline void serio_continue_rx(struct serio *serio)
}
#endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT 1
-#define SERIO_PARITY 2
-#define SERIO_FRAME 4
-
-/*
- * Serio types
- */
-#define SERIO_XT 0x00
-#define SERIO_8042 0x01
-#define SERIO_RS232 0x02
-#define SERIO_HIL_MLC 0x03
-#define SERIO_PS_PSTHRU 0x05
-#define SERIO_8042_XL 0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN 0x00
-#define SERIO_MSC 0x01
-#define SERIO_SUN 0x02
-#define SERIO_MS 0x03
-#define SERIO_MP 0x04
-#define SERIO_MZ 0x05
-#define SERIO_MZP 0x06
-#define SERIO_MZPP 0x07
-#define SERIO_VSXXXAA 0x08
-#define SERIO_SUNKBD 0x10
-#define SERIO_WARRIOR 0x18
-#define SERIO_SPACEORB 0x19
-#define SERIO_MAGELLAN 0x1a
-#define SERIO_SPACEBALL 0x1b
-#define SERIO_GUNZE 0x1c
-#define SERIO_IFORCE 0x1d
-#define SERIO_STINGER 0x1e
-#define SERIO_NEWTON 0x1f
-#define SERIO_STOWAWAY 0x20
-#define SERIO_H3600 0x21
-#define SERIO_PS2SER 0x22
-#define SERIO_TWIDKBD 0x23
-#define SERIO_TWIDJOY 0x24
-#define SERIO_HIL 0x25
-#define SERIO_SNES232 0x26
-#define SERIO_SEMTECH 0x27
-#define SERIO_LKKBD 0x28
-#define SERIO_ELO 0x29
-#define SERIO_MICROTOUCH 0x30
-#define SERIO_PENMOUNT 0x31
-#define SERIO_TOUCHRIGHT 0x32
-#define SERIO_TOUCHWIN 0x33
-#define SERIO_TAOSEVM 0x34
-#define SERIO_FUJITSU 0x35
-#define SERIO_ZHENHUA 0x36
-#define SERIO_INEXIO 0x37
-#define SERIO_TOUCHIT213 0x38
-#define SERIO_W8001 0x39
-#define SERIO_DYNAPRO 0x3a
-#define SERIO_HAMPSHIRE 0x3b
-#define SERIO_PS2MULT 0x3c
-#define SERIO_TSC40 0x3d
-
-#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
index edd0868..bcf8a6a 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -1,88 +1,11 @@
#ifndef _LINUX_SHM_H_
#define _LINUX_SHM_H_
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
-
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
+#include <uapi/linux/shm.h>
-#define SHMMAX 0x2000000 /* max shared seg size (bytes) */
-#define SHMMIN 1 /* min shared seg size (bytes) */
-#define SHMMNI 4096 /* max num of segs system wide */
-#ifdef __KERNEL__
#define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI /* max shared segs per process */
-
-#ifdef __KERNEL__
#include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
- struct ipc_perm shm_perm; /* operation perms */
- int shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- __kernel_time_t shm_dtime; /* last detach time */
- __kernel_time_t shm_ctime; /* last change time */
- __kernel_ipc_pid_t shm_cpid; /* pid of creator */
- __kernel_ipc_pid_t shm_lpid; /* pid of last operator */
- unsigned short shm_nattch; /* no. of current attaches */
- unsigned short shm_unused; /* compatibility */
- void *shm_unused2; /* ditto - used by DIPC */
- void *shm_unused3; /* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */
-#define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define SHM_RDONLY 010000 /* read-only access */
-#define SHM_RND 020000 /* round attach address to SHMLBA boundary */
-#define SHM_REMAP 040000 /* take-over region on attach */
-#define SHM_EXEC 0100000 /* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 11
-#define SHM_UNLOCK 12
-
-/* ipcs ctl commands */
-#define SHM_STAT 13
-#define SHM_INFO 14
-
-/* Obsolete, used only for backwards compatibility */
-struct shminfo {
- int shmmax;
- int shmmin;
- int shmmni;
- int shmseg;
- int shmall;
-};
-
-struct shm_info {
- int used_ids;
- unsigned long shm_tot; /* total allocated shm */
- unsigned long shm_rss; /* total resident shm */
- unsigned long shm_swp; /* total swapped shm */
- unsigned long swap_attempts;
- unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
struct shmid_kernel /* private to the kernel */
{
struct kern_ipc_perm shm_perm;
@@ -127,6 +50,4 @@ static inline void exit_shm(struct task_struct *task)
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 26b424a..e19a011 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -1,11 +1,8 @@
#ifndef _LINUX_SIGNAL_H
#define _LINUX_SIGNAL_H
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/signal.h>
struct task_struct;
@@ -388,6 +385,4 @@ int unhandled_signal(struct task_struct *tsk, int sig);
void signals_init(void);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 247399b..eadbe22 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -4,51 +4,11 @@
* Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
*
*/
-
#ifndef _LINUX_SIGNALFD_H
#define _LINUX_SIGNALFD_H
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-
-/* Flags for signalfd4. */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
- __u32 ssi_signo;
- __s32 ssi_errno;
- __s32 ssi_code;
- __u32 ssi_pid;
- __u32 ssi_uid;
- __s32 ssi_fd;
- __u32 ssi_tid;
- __u32 ssi_band;
- __u32 ssi_overrun;
- __u32 ssi_trapno;
- __s32 ssi_status;
- __s32 ssi_int;
- __u64 ssi_ptr;
- __u64 ssi_utime;
- __u64 ssi_stime;
- __u64 ssi_addr;
- __u16 ssi_addr_lsb;
+#include <uapi/linux/signalfd.h>
- /*
- * Pad strcture to 128 bytes. Remember to update the
- * pad size when you add new members. We use a fixed
- * size structure to avoid compatibility problems with
- * future versions, and we leave extra space for additional
- * members. We use fixed size members because this strcture
- * comes out of a read(2) and we really don't want to have
- * a compat on read(2).
- */
- __u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
#ifdef CONFIG_SIGNALFD
@@ -71,6 +31,4 @@ static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
#endif /* CONFIG_SIGNALFD */
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
deleted file mode 100644
index fdfba23..0000000
--- a/include/linux/snmp.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Definitions for MIBs
- *
- * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef _LINUX_SNMP_H
-#define _LINUX_SNMP_H
-
-/* ipstats mib definitions */
-/*
- * RFC 1213: MIB-II
- * RFC 2011 (updates 1213): SNMPv2-MIB-IP
- * RFC 2863: Interfaces Group MIB
- * RFC 2465: IPv6 MIB: General Group
- * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
- */
-enum
-{
- IPSTATS_MIB_NUM = 0,
-/* frequently written fields in fast path, kept in same cache line */
- IPSTATS_MIB_INPKTS, /* InReceives */
- IPSTATS_MIB_INOCTETS, /* InOctets */
- IPSTATS_MIB_INDELIVERS, /* InDelivers */
- IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */
- IPSTATS_MIB_OUTPKTS, /* OutRequests */
- IPSTATS_MIB_OUTOCTETS, /* OutOctets */
-/* other fields */
- IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */
- IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */
- IPSTATS_MIB_INNOROUTES, /* InNoRoutes */
- IPSTATS_MIB_INADDRERRORS, /* InAddrErrors */
- IPSTATS_MIB_INUNKNOWNPROTOS, /* InUnknownProtos */
- IPSTATS_MIB_INTRUNCATEDPKTS, /* InTruncatedPkts */
- IPSTATS_MIB_INDISCARDS, /* InDiscards */
- IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */
- IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */
- IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */
- IPSTATS_MIB_REASMREQDS, /* ReasmReqds */
- IPSTATS_MIB_REASMOKS, /* ReasmOKs */
- IPSTATS_MIB_REASMFAILS, /* ReasmFails */
- IPSTATS_MIB_FRAGOKS, /* FragOKs */
- IPSTATS_MIB_FRAGFAILS, /* FragFails */
- IPSTATS_MIB_FRAGCREATES, /* FragCreates */
- IPSTATS_MIB_INMCASTPKTS, /* InMcastPkts */
- IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */
- IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */
- IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */
- IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */
- IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */
- IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */
- IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */
- __IPSTATS_MIB_MAX
-};
-
-/* icmp mib definitions */
-/*
- * RFC 1213: MIB-II ICMP Group
- * RFC 2011 (updates 1213): SNMPv2 MIB for IP: ICMP group
- */
-enum
-{
- ICMP_MIB_NUM = 0,
- ICMP_MIB_INMSGS, /* InMsgs */
- ICMP_MIB_INERRORS, /* InErrors */
- ICMP_MIB_INDESTUNREACHS, /* InDestUnreachs */
- ICMP_MIB_INTIMEEXCDS, /* InTimeExcds */
- ICMP_MIB_INPARMPROBS, /* InParmProbs */
- ICMP_MIB_INSRCQUENCHS, /* InSrcQuenchs */
- ICMP_MIB_INREDIRECTS, /* InRedirects */
- ICMP_MIB_INECHOS, /* InEchos */
- ICMP_MIB_INECHOREPS, /* InEchoReps */
- ICMP_MIB_INTIMESTAMPS, /* InTimestamps */
- ICMP_MIB_INTIMESTAMPREPS, /* InTimestampReps */
- ICMP_MIB_INADDRMASKS, /* InAddrMasks */
- ICMP_MIB_INADDRMASKREPS, /* InAddrMaskReps */
- ICMP_MIB_OUTMSGS, /* OutMsgs */
- ICMP_MIB_OUTERRORS, /* OutErrors */
- ICMP_MIB_OUTDESTUNREACHS, /* OutDestUnreachs */
- ICMP_MIB_OUTTIMEEXCDS, /* OutTimeExcds */
- ICMP_MIB_OUTPARMPROBS, /* OutParmProbs */
- ICMP_MIB_OUTSRCQUENCHS, /* OutSrcQuenchs */
- ICMP_MIB_OUTREDIRECTS, /* OutRedirects */
- ICMP_MIB_OUTECHOS, /* OutEchos */
- ICMP_MIB_OUTECHOREPS, /* OutEchoReps */
- ICMP_MIB_OUTTIMESTAMPS, /* OutTimestamps */
- ICMP_MIB_OUTTIMESTAMPREPS, /* OutTimestampReps */
- ICMP_MIB_OUTADDRMASKS, /* OutAddrMasks */
- ICMP_MIB_OUTADDRMASKREPS, /* OutAddrMaskReps */
- __ICMP_MIB_MAX
-};
-
-#define __ICMPMSG_MIB_MAX 512 /* Out+In for all 8-bit ICMP types */
-
-/* icmp6 mib definitions */
-/*
- * RFC 2466: ICMPv6-MIB
- */
-enum
-{
- ICMP6_MIB_NUM = 0,
- ICMP6_MIB_INMSGS, /* InMsgs */
- ICMP6_MIB_INERRORS, /* InErrors */
- ICMP6_MIB_OUTMSGS, /* OutMsgs */
- ICMP6_MIB_OUTERRORS, /* OutErrors */
- __ICMP6_MIB_MAX
-};
-
-#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
-
-/* tcp mib definitions */
-/*
- * RFC 1213: MIB-II TCP group
- * RFC 2012 (updates 1213): SNMPv2-MIB-TCP
- */
-enum
-{
- TCP_MIB_NUM = 0,
- TCP_MIB_RTOALGORITHM, /* RtoAlgorithm */
- TCP_MIB_RTOMIN, /* RtoMin */
- TCP_MIB_RTOMAX, /* RtoMax */
- TCP_MIB_MAXCONN, /* MaxConn */
- TCP_MIB_ACTIVEOPENS, /* ActiveOpens */
- TCP_MIB_PASSIVEOPENS, /* PassiveOpens */
- TCP_MIB_ATTEMPTFAILS, /* AttemptFails */
- TCP_MIB_ESTABRESETS, /* EstabResets */
- TCP_MIB_CURRESTAB, /* CurrEstab */
- TCP_MIB_INSEGS, /* InSegs */
- TCP_MIB_OUTSEGS, /* OutSegs */
- TCP_MIB_RETRANSSEGS, /* RetransSegs */
- TCP_MIB_INERRS, /* InErrs */
- TCP_MIB_OUTRSTS, /* OutRsts */
- __TCP_MIB_MAX
-};
-
-/* udp mib definitions */
-/*
- * RFC 1213: MIB-II UDP group
- * RFC 2013 (updates 1213): SNMPv2-MIB-UDP
- */
-enum
-{
- UDP_MIB_NUM = 0,
- UDP_MIB_INDATAGRAMS, /* InDatagrams */
- UDP_MIB_NOPORTS, /* NoPorts */
- UDP_MIB_INERRORS, /* InErrors */
- UDP_MIB_OUTDATAGRAMS, /* OutDatagrams */
- UDP_MIB_RCVBUFERRORS, /* RcvbufErrors */
- UDP_MIB_SNDBUFERRORS, /* SndbufErrors */
- __UDP_MIB_MAX
-};
-
-/* linux mib definitions */
-enum
-{
- LINUX_MIB_NUM = 0,
- LINUX_MIB_SYNCOOKIESSENT, /* SyncookiesSent */
- LINUX_MIB_SYNCOOKIESRECV, /* SyncookiesRecv */
- LINUX_MIB_SYNCOOKIESFAILED, /* SyncookiesFailed */
- LINUX_MIB_EMBRYONICRSTS, /* EmbryonicRsts */
- LINUX_MIB_PRUNECALLED, /* PruneCalled */
- LINUX_MIB_RCVPRUNED, /* RcvPruned */
- LINUX_MIB_OFOPRUNED, /* OfoPruned */
- LINUX_MIB_OUTOFWINDOWICMPS, /* OutOfWindowIcmps */
- LINUX_MIB_LOCKDROPPEDICMPS, /* LockDroppedIcmps */
- LINUX_MIB_ARPFILTER, /* ArpFilter */
- LINUX_MIB_TIMEWAITED, /* TimeWaited */
- LINUX_MIB_TIMEWAITRECYCLED, /* TimeWaitRecycled */
- LINUX_MIB_TIMEWAITKILLED, /* TimeWaitKilled */
- LINUX_MIB_PAWSPASSIVEREJECTED, /* PAWSPassiveRejected */
- LINUX_MIB_PAWSACTIVEREJECTED, /* PAWSActiveRejected */
- LINUX_MIB_PAWSESTABREJECTED, /* PAWSEstabRejected */
- LINUX_MIB_DELAYEDACKS, /* DelayedACKs */
- LINUX_MIB_DELAYEDACKLOCKED, /* DelayedACKLocked */
- LINUX_MIB_DELAYEDACKLOST, /* DelayedACKLost */
- LINUX_MIB_LISTENOVERFLOWS, /* ListenOverflows */
- LINUX_MIB_LISTENDROPS, /* ListenDrops */
- LINUX_MIB_TCPPREQUEUED, /* TCPPrequeued */
- LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG, /* TCPDirectCopyFromBacklog */
- LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE, /* TCPDirectCopyFromPrequeue */
- LINUX_MIB_TCPPREQUEUEDROPPED, /* TCPPrequeueDropped */
- LINUX_MIB_TCPHPHITS, /* TCPHPHits */
- LINUX_MIB_TCPHPHITSTOUSER, /* TCPHPHitsToUser */
- LINUX_MIB_TCPPUREACKS, /* TCPPureAcks */
- LINUX_MIB_TCPHPACKS, /* TCPHPAcks */
- LINUX_MIB_TCPRENORECOVERY, /* TCPRenoRecovery */
- LINUX_MIB_TCPSACKRECOVERY, /* TCPSackRecovery */
- LINUX_MIB_TCPSACKRENEGING, /* TCPSACKReneging */
- LINUX_MIB_TCPFACKREORDER, /* TCPFACKReorder */
- LINUX_MIB_TCPSACKREORDER, /* TCPSACKReorder */
- LINUX_MIB_TCPRENOREORDER, /* TCPRenoReorder */
- LINUX_MIB_TCPTSREORDER, /* TCPTSReorder */
- LINUX_MIB_TCPFULLUNDO, /* TCPFullUndo */
- LINUX_MIB_TCPPARTIALUNDO, /* TCPPartialUndo */
- LINUX_MIB_TCPDSACKUNDO, /* TCPDSACKUndo */
- LINUX_MIB_TCPLOSSUNDO, /* TCPLossUndo */
- LINUX_MIB_TCPLOSTRETRANSMIT, /* TCPLostRetransmit */
- LINUX_MIB_TCPRENOFAILURES, /* TCPRenoFailures */
- LINUX_MIB_TCPSACKFAILURES, /* TCPSackFailures */
- LINUX_MIB_TCPLOSSFAILURES, /* TCPLossFailures */
- LINUX_MIB_TCPFASTRETRANS, /* TCPFastRetrans */
- LINUX_MIB_TCPFORWARDRETRANS, /* TCPForwardRetrans */
- LINUX_MIB_TCPSLOWSTARTRETRANS, /* TCPSlowStartRetrans */
- LINUX_MIB_TCPTIMEOUTS, /* TCPTimeouts */
- LINUX_MIB_TCPRENORECOVERYFAIL, /* TCPRenoRecoveryFail */
- LINUX_MIB_TCPSACKRECOVERYFAIL, /* TCPSackRecoveryFail */
- LINUX_MIB_TCPSCHEDULERFAILED, /* TCPSchedulerFailed */
- LINUX_MIB_TCPRCVCOLLAPSED, /* TCPRcvCollapsed */
- LINUX_MIB_TCPDSACKOLDSENT, /* TCPDSACKOldSent */
- LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */
- LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */
- LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */
- LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */
- LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */
- LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */
- LINUX_MIB_TCPABORTONTIMEOUT, /* TCPAbortOnTimeout */
- LINUX_MIB_TCPABORTONLINGER, /* TCPAbortOnLinger */
- LINUX_MIB_TCPABORTFAILED, /* TCPAbortFailed */
- LINUX_MIB_TCPMEMORYPRESSURES, /* TCPMemoryPressures */
- LINUX_MIB_TCPSACKDISCARD, /* TCPSACKDiscard */
- LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */
- LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */
- LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */
- LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */
- LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */
- LINUX_MIB_SACKSHIFTED,
- LINUX_MIB_SACKMERGED,
- LINUX_MIB_SACKSHIFTFALLBACK,
- LINUX_MIB_TCPBACKLOGDROP,
- LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
- LINUX_MIB_TCPDEFERACCEPTDROP,
- LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
- LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
- LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */
- LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */
- LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */
- LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */
- LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */
- LINUX_MIB_TCPOFODROP, /* TCPOFODrop */
- LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */
- LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */
- LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */
- LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */
- LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/
- LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */
- LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */
- LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */
- __LINUX_MIB_MAX
-};
-
-/* linux Xfrm mib definitions */
-enum
-{
- LINUX_MIB_XFRMNUM = 0,
- LINUX_MIB_XFRMINERROR, /* XfrmInError */
- LINUX_MIB_XFRMINBUFFERERROR, /* XfrmInBufferError */
- LINUX_MIB_XFRMINHDRERROR, /* XfrmInHdrError */
- LINUX_MIB_XFRMINNOSTATES, /* XfrmInNoStates */
- LINUX_MIB_XFRMINSTATEPROTOERROR, /* XfrmInStateProtoError */
- LINUX_MIB_XFRMINSTATEMODEERROR, /* XfrmInStateModeError */
- LINUX_MIB_XFRMINSTATESEQERROR, /* XfrmInStateSeqError */
- LINUX_MIB_XFRMINSTATEEXPIRED, /* XfrmInStateExpired */
- LINUX_MIB_XFRMINSTATEMISMATCH, /* XfrmInStateMismatch */
- LINUX_MIB_XFRMINSTATEINVALID, /* XfrmInStateInvalid */
- LINUX_MIB_XFRMINTMPLMISMATCH, /* XfrmInTmplMismatch */
- LINUX_MIB_XFRMINNOPOLS, /* XfrmInNoPols */
- LINUX_MIB_XFRMINPOLBLOCK, /* XfrmInPolBlock */
- LINUX_MIB_XFRMINPOLERROR, /* XfrmInPolError */
- LINUX_MIB_XFRMOUTERROR, /* XfrmOutError */
- LINUX_MIB_XFRMOUTBUNDLEGENERROR, /* XfrmOutBundleGenError */
- LINUX_MIB_XFRMOUTBUNDLECHECKERROR, /* XfrmOutBundleCheckError */
- LINUX_MIB_XFRMOUTNOSTATES, /* XfrmOutNoStates */
- LINUX_MIB_XFRMOUTSTATEPROTOERROR, /* XfrmOutStateProtoError */
- LINUX_MIB_XFRMOUTSTATEMODEERROR, /* XfrmOutStateModeError */
- LINUX_MIB_XFRMOUTSTATESEQERROR, /* XfrmOutStateSeqError */
- LINUX_MIB_XFRMOUTSTATEEXPIRED, /* XfrmOutStateExpired */
- LINUX_MIB_XFRMOUTPOLBLOCK, /* XfrmOutPolBlock */
- LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */
- LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */
- LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/
- __LINUX_MIB_XFRMMAX
-};
-
-#endif /* _LINUX_SNMP_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index e3e395a..e8d702e 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -1,29 +1,8 @@
#ifndef __SOCK_DIAG_H__
#define __SOCK_DIAG_H__
-#include <linux/types.h>
+#include <uapi/linux/sock_diag.h>
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
-};
-
-enum {
- SK_MEMINFO_RMEM_ALLOC,
- SK_MEMINFO_RCVBUF,
- SK_MEMINFO_WMEM_ALLOC,
- SK_MEMINFO_SNDBUF,
- SK_MEMINFO_FWD_ALLOC,
- SK_MEMINFO_WMEM_QUEUED,
- SK_MEMINFO_OPTMEM,
- SK_MEMINFO_BACKLOG,
-
- SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
struct sk_buff;
struct nlmsghdr;
struct sock;
@@ -44,5 +23,4 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie);
int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
-#endif /* KERNEL */
#endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
index ba7b2e8..9a546ff 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,30 +1,13 @@
#ifndef _LINUX_SOCKET_H
#define _LINUX_SOCKET_H
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE 128 /* Implementation specific max size */
-#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
- /* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
- __kernel_sa_family_t ss_family; /* address family */
- /* Following field(s) are implementation specific */
- char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
- /* space to achieve desired size, */
- /* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
-
-#ifdef __KERNEL__
#include <asm/socket.h> /* arch-dependent defines */
#include <linux/sockios.h> /* the SIOCxxx I/O controls */
#include <linux/uio.h> /* iovec support */
#include <linux/types.h> /* pid_t */
#include <linux/compiler.h> /* __user */
+#include <uapi/linux/socket.h>
struct pid;
struct cred;
@@ -340,5 +323,4 @@ extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen
unsigned int flags, struct timespec *timeout);
extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
#endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/linux/sockios.h
deleted file mode 100644
index 7997a50..0000000
--- a/include/linux/sockios.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * Definitions of the socket-level I/O control calls.
- *
- * Version: @(#)sockios.h 1.0.2 03/09/93
- *
- * Authors: Ross Biro
- * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_SOCKIOS_H
-#define _LINUX_SOCKIOS_H
-
-#include <asm/sockios.h>
-
-/* Linux-specific socket ioctls */
-#define SIOCINQ FIONREAD
-#define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */
-
-/* Routing table calls. */
-#define SIOCADDRT 0x890B /* add routing table entry */
-#define SIOCDELRT 0x890C /* delete routing table entry */
-#define SIOCRTMSG 0x890D /* call to routing system */
-
-/* Socket configuration controls. */
-#define SIOCGIFNAME 0x8910 /* get iface name */
-#define SIOCSIFLINK 0x8911 /* set iface channel */
-#define SIOCGIFCONF 0x8912 /* get iface list */
-#define SIOCGIFFLAGS 0x8913 /* get flags */
-#define SIOCSIFFLAGS 0x8914 /* set flags */
-#define SIOCGIFADDR 0x8915 /* get PA address */
-#define SIOCSIFADDR 0x8916 /* set PA address */
-#define SIOCGIFDSTADDR 0x8917 /* get remote PA address */
-#define SIOCSIFDSTADDR 0x8918 /* set remote PA address */
-#define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */
-#define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */
-#define SIOCGIFNETMASK 0x891b /* get network PA mask */
-#define SIOCSIFNETMASK 0x891c /* set network PA mask */
-#define SIOCGIFMETRIC 0x891d /* get metric */
-#define SIOCSIFMETRIC 0x891e /* set metric */
-#define SIOCGIFMEM 0x891f /* get memory address (BSD) */
-#define SIOCSIFMEM 0x8920 /* set memory address (BSD) */
-#define SIOCGIFMTU 0x8921 /* get MTU size */
-#define SIOCSIFMTU 0x8922 /* set MTU size */
-#define SIOCSIFNAME 0x8923 /* set interface name */
-#define SIOCSIFHWADDR 0x8924 /* set hardware address */
-#define SIOCGIFENCAP 0x8925 /* get/set encapsulations */
-#define SIOCSIFENCAP 0x8926
-#define SIOCGIFHWADDR 0x8927 /* Get hardware address */
-#define SIOCGIFSLAVE 0x8929 /* Driver slaving support */
-#define SIOCSIFSLAVE 0x8930
-#define SIOCADDMULTI 0x8931 /* Multicast address lists */
-#define SIOCDELMULTI 0x8932
-#define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */
-#define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */
-#define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */
-#define SIOCGIFPFLAGS 0x8935
-#define SIOCDIFADDR 0x8936 /* delete PA address */
-#define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */
-#define SIOCGIFCOUNT 0x8938 /* get number of devices */
-
-#define SIOCGIFBR 0x8940 /* Bridging support */
-#define SIOCSIFBR 0x8941 /* Set bridging options */
-
-#define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */
-#define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */
-
-/* SIOCGIFDIVERT was: 0x8944 Frame diversion support */
-/* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */
-
-#define SIOCETHTOOL 0x8946 /* Ethtool interface */
-
-#define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */
-#define SIOCGMIIREG 0x8948 /* Read MII PHY register. */
-#define SIOCSMIIREG 0x8949 /* Write MII PHY register. */
-
-#define SIOCWANDEV 0x894A /* get/set netdev parameters */
-
-#define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */
-
-/* ARP cache control calls. */
- /* 0x8950 - 0x8952 * obsolete calls, don't re-use */
-#define SIOCDARP 0x8953 /* delete ARP table entry */
-#define SIOCGARP 0x8954 /* get ARP table entry */
-#define SIOCSARP 0x8955 /* set ARP table entry */
-
-/* RARP cache control calls. */
-#define SIOCDRARP 0x8960 /* delete RARP table entry */
-#define SIOCGRARP 0x8961 /* get RARP table entry */
-#define SIOCSRARP 0x8962 /* set RARP table entry */
-
-/* Driver configuration calls */
-
-#define SIOCGIFMAP 0x8970 /* Get device parameters */
-#define SIOCSIFMAP 0x8971 /* Set device parameters */
-
-/* DLCI configuration calls */
-
-#define SIOCADDDLCI 0x8980 /* Create new DLCI device */
-#define SIOCDELDLCI 0x8981 /* Delete DLCI device */
-
-#define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */
-#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */
-
-/* bonding calls */
-
-#define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */
-#define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/
-#define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */
-#define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */
-#define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */
-#define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */
-
-/* bridge calls */
-#define SIOCBRADDBR 0x89a0 /* create new bridge device */
-#define SIOCBRDELBR 0x89a1 /* remove bridge device */
-#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
-#define SIOCBRDELIF 0x89a3 /* remove interface from bridge */
-
-/* hardware time stamping: parameters in linux/net_tstamp.h */
-#define SIOCSHWTSTAMP 0x89b0
-
-/* Device private ioctl calls */
-
-/*
- * These 16 ioctls are available to devices via the do_ioctl() device
- * vector. Each device should include this file and redefine these names
- * as their own. Because these are device dependent it is a good idea
- * _NOT_ to issue them to random objects and hope.
- *
- * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
- */
-
-#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */
-
-/*
- * These 16 ioctl calls are protocol private
- */
-
-#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
-#endif /* _LINUX_SOCKIOS_H */
diff --git a/include/linux/som.h b/include/linux/som.h
deleted file mode 100644
index 166594e..0000000
--- a/include/linux/som.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _LINUX_SOM_H
-#define _LINUX_SOM_H
-
-/* File format definition for SOM executables / shared libraries */
-
-/* we need struct timespec */
-#include <linux/time.h>
-
-#define SOM_PAGESIZE 4096
-
-/* this is the SOM header */
-struct som_hdr {
- short system_id; /* magic number - system */
- short a_magic; /* magic number - file type */
- unsigned int version_id; /* versiod ID: YYMMDDHH */
- struct timespec file_time; /* system clock */
- unsigned int entry_space; /* space for entry point */
- unsigned int entry_subspace; /* subspace for entry point */
- unsigned int entry_offset; /* offset of entry point */
- unsigned int aux_header_location; /* auxiliary header location */
- unsigned int aux_header_size; /* auxiliary header size */
- unsigned int som_length; /* length of entire SOM */
- unsigned int presumed_dp; /* compiler's DP value */
- unsigned int space_location; /* space dictionary location */
- unsigned int space_total; /* number of space entries */
- unsigned int subspace_location; /* subspace entries location */
- unsigned int subspace_total; /* number of subspace entries */
- unsigned int loader_fixup_location; /* MPE/iX loader fixup */
- unsigned int loader_fixup_total; /* number of fixup records */
- unsigned int space_strings_location; /* (sub)space names */
- unsigned int space_strings_size; /* size of strings area */
- unsigned int init_array_location; /* reserved */
- unsigned int init_array_total; /* reserved */
- unsigned int compiler_location; /* module dictionary */
- unsigned int compiler_total; /* number of modules */
- unsigned int symbol_location; /* symbol dictionary */
- unsigned int symbol_total; /* number of symbols */
- unsigned int fixup_request_location; /* fixup requests */
- unsigned int fixup_request_total; /* number of fixup requests */
- unsigned int symbol_strings_location;/* module & symbol names area */
- unsigned int symbol_strings_size; /* size of strings area */
- unsigned int unloadable_sp_location; /* unloadable spaces location */
- unsigned int unloadable_sp_size; /* size of data */
- unsigned int checksum;
-};
-
-/* values for system_id */
-
-#define SOM_SID_PARISC_1_0 0x020b
-#define SOM_SID_PARISC_1_1 0x0210
-#define SOM_SID_PARISC_2_0 0x0214
-
-/* values for a_magic */
-
-#define SOM_LIB_EXEC 0x0104
-#define SOM_RELOCATABLE 0x0106
-#define SOM_EXEC_NONSHARE 0x0107
-#define SOM_EXEC_SHARE 0x0108
-#define SOM_EXEC_DEMAND 0x010B
-#define SOM_LIB_DYN 0x010D
-#define SOM_LIB_SHARE 0x010E
-#define SOM_LIB_RELOC 0x0619
-
-/* values for version_id. Decimal not hex, yes. Grr. */
-
-#define SOM_ID_OLD 85082112
-#define SOM_ID_NEW 87102412
-
-struct aux_id {
- unsigned int mandatory :1; /* the linker must understand this */
- unsigned int copy :1; /* Must be copied by the linker */
- unsigned int append :1; /* Must be merged by the linker */
- unsigned int ignore :1; /* Discard section if unknown */
- unsigned int reserved :12;
- unsigned int type :16; /* Header type */
- unsigned int length; /* length of _following_ data */
-};
-
-/* The Exec Auxiliary Header. Called The HP-UX Header within HP apparently. */
-struct som_exec_auxhdr {
- struct aux_id som_auxhdr;
- int exec_tsize; /* Text size in bytes */
- int exec_tmem; /* Address to load text at */
- int exec_tfile; /* Location of text in file */
- int exec_dsize; /* Data size in bytes */
- int exec_dmem; /* Address to load data at */
- int exec_dfile; /* Location of data in file */
- int exec_bsize; /* Uninitialised data (bss) */
- int exec_entry; /* Address to start executing */
- int exec_flags; /* loader flags */
- int exec_bfill; /* initialisation value for bss */
-};
-
-/* Oh, the things people do to avoid casts. Shame it'll break with gcc's
- * new aliasing rules really.
- */
-union name_pt {
- char * n_name;
- unsigned int n_strx;
-};
-
-/* The Space Dictionary */
-struct space_dictionary_record {
- union name_pt name; /* index to subspace name */
- unsigned int is_loadable :1; /* loadable */
- unsigned int is_defined :1; /* defined within file */
- unsigned int is_private :1; /* not sharable */
- unsigned int has_intermediate_code :1; /* contains intermediate code */
- unsigned int is_tspecific :1; /* thread specific */
- unsigned int reserved :11; /* for future expansion */
- unsigned int sort_key :8; /* for linker */
- unsigned int reserved2 :8; /* for future expansion */
-
- int space_number; /* index */
- int subspace_index; /* index into subspace dict */
- unsigned int subspace_quantity; /* number of subspaces */
- int loader_fix_index; /* for loader */
- unsigned int loader_fix_quantity; /* for loader */
- int init_pointer_index; /* data pointer array index */
- unsigned int init_pointer_quantity; /* number of data pointers */
-};
-
-/* The Subspace Dictionary */
-struct subspace_dictionary_record {
- int space_index;
- unsigned int access_control_bits :7;
- unsigned int memory_resident :1;
- unsigned int dup_common :1;
- unsigned int is_common :1;
- unsigned int quadrant :2;
- unsigned int initially_frozen :1;
- unsigned int is_first :1;
- unsigned int code_only :1;
- unsigned int sort_key :8;
- unsigned int replicate_init :1;
- unsigned int continuation :1;
- unsigned int is_tspecific :1;
- unsigned int is_comdat :1;
- unsigned int reserved :4;
-
- int file_loc_init_value;
- unsigned int initialization_length;
- unsigned int subspace_start;
- unsigned int subspace_length;
-
- unsigned int reserved2 :5;
- unsigned int alignment :27;
-
- union name_pt name;
- int fixup_request_index;
- unsigned int fixup_request_quantity;
-};
-
-#endif /* _LINUX_SOM_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index de8832d..680f9a3 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -1,64 +1,10 @@
/* sonet.h - SONET/SHD physical layer control */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
#ifndef LINUX_SONET_H
#define LINUX_SONET_H
-#define __SONET_ITEMS \
- __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \
- __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \
- __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \
- __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \
- __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \
- __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \
- __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \
- __HANDLE_ITEM(tx_cells); /* cells sent */ \
- __HANDLE_ITEM(rx_cells); /* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
- __SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
- /* get statistics */
-#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
- /* ... and zero counters */
-#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int)
- /* set error insertion */
-#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int)
- /* clear error insertion */
-#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int)
- /* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
- /* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
- /* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
- unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */
-
-#define SONET_INS_SBIP 1 /* section BIP */
-#define SONET_INS_LBIP 2 /* line BIP */
-#define SONET_INS_PBIP 4 /* path BIP */
-#define SONET_INS_FRAME 8 /* out of frame */
-#define SONET_INS_LOS 16 /* set line to zero */
-#define SONET_INS_LAIS 32 /* line alarm indication signal */
-#define SONET_INS_PAIS 64 /* path alarm indication signal */
-#define SONET_INS_HCS 128 /* insert HCS error */
-
-#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */
-#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
+#include <uapi/linux/sonet.h>
struct k_sonet_stats {
#define __HANDLE_ITEM(i) atomic_t i
@@ -71,5 +17,3 @@ extern void sonet_subtract_stats(struct k_sonet_stats *from,
struct sonet_stats *to);
#endif
-
-#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
index c0f87da..0b7cc26 100644
--- a/include/linux/sonypi.h
+++ b/include/linux/sonypi.h
@@ -32,117 +32,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-
#ifndef _SONYPI_H_
#define _SONYPI_H_
-#include <linux/types.h>
-
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE 0
-#define SONYPI_EVENT_JOGDIAL_DOWN 1
-#define SONYPI_EVENT_JOGDIAL_UP 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED 7
-#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10
-#define SONYPI_EVENT_FNKEY_ESC 11
-#define SONYPI_EVENT_FNKEY_F1 12
-#define SONYPI_EVENT_FNKEY_F2 13
-#define SONYPI_EVENT_FNKEY_F3 14
-#define SONYPI_EVENT_FNKEY_F4 15
-#define SONYPI_EVENT_FNKEY_F5 16
-#define SONYPI_EVENT_FNKEY_F6 17
-#define SONYPI_EVENT_FNKEY_F7 18
-#define SONYPI_EVENT_FNKEY_F8 19
-#define SONYPI_EVENT_FNKEY_F9 20
-#define SONYPI_EVENT_FNKEY_F10 21
-#define SONYPI_EVENT_FNKEY_F11 22
-#define SONYPI_EVENT_FNKEY_F12 23
-#define SONYPI_EVENT_FNKEY_1 24
-#define SONYPI_EVENT_FNKEY_2 25
-#define SONYPI_EVENT_FNKEY_D 26
-#define SONYPI_EVENT_FNKEY_E 27
-#define SONYPI_EVENT_FNKEY_F 28
-#define SONYPI_EVENT_FNKEY_S 29
-#define SONYPI_EVENT_FNKEY_B 30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED 31
-#define SONYPI_EVENT_PKEY_P1 32
-#define SONYPI_EVENT_PKEY_P2 33
-#define SONYPI_EVENT_PKEY_P3 34
-#define SONYPI_EVENT_BACK_PRESSED 35
-#define SONYPI_EVENT_LID_CLOSED 36
-#define SONYPI_EVENT_LID_OPENED 37
-#define SONYPI_EVENT_BLUETOOTH_ON 38
-#define SONYPI_EVENT_BLUETOOTH_OFF 39
-#define SONYPI_EVENT_HELP_PRESSED 40
-#define SONYPI_EVENT_FNKEY_ONLY 41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP 43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49
-#define SONYPI_EVENT_ZOOM_PRESSED 50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51
-#define SONYPI_EVENT_MEYE_FACE 52
-#define SONYPI_EVENT_MEYE_OPPOSITE 53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT 54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT 55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED 56
-#define SONYPI_EVENT_BATTERY_INSERT 57
-#define SONYPI_EVENT_BATTERY_REMOVE 58
-#define SONYPI_EVENT_FNKEY_RELEASED 59
-#define SONYPI_EVENT_WIRELESS_ON 60
-#define SONYPI_EVENT_WIRELESS_OFF 61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED 62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63
-#define SONYPI_EVENT_CD_EJECT_PRESSED 64
-#define SONYPI_EVENT_MODEKEY_PRESSED 65
-#define SONYPI_EVENT_PKEY_P4 66
-#define SONYPI_EVENT_PKEY_P5 67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED 68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED 69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71
-#define SONYPI_EVENT_MEDIA_PRESSED 72
-#define SONYPI_EVENT_VENDOR_PRESSED 73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT _IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT _IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16)
+#include <uapi/linux/sonypi.h>
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1 0x01
-#define SONYPI_BFLAGS_B2 0x02
-#define SONYPI_BFLAGS_AC 0x04
-#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE _IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE _IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN _IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN _IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP _IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
/* used only for communication between v4l and sonypi */
@@ -166,6 +60,4 @@
#define SONYPI_COMMAND_GETCAMERAROMVERSION 18 /* obsolete */
#define SONYPI_COMMAND_GETCAMERAREVISION 19 /* obsolete */
-#endif /* __KERNEL__ */
-
#endif /* _SONYPI_H_ */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index fae20ba..73ded04 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -1,33 +1,8 @@
#ifndef _LINUX_SOUND_H
#define _LINUX_SOUND_H
-/*
- * Minor numbers for the sound driver.
- */
-
-#include <linux/fs.h>
+#include <uapi/linux/sound.h>
-#define SND_DEV_CTL 0 /* Control port /dev/mixer */
-#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
- synthesizer and MIDI output) */
-#define SND_DEV_MIDIN 2 /* Raw midi access */
-#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED 6
-#define SND_DEV_AWFM 7 /* Reserved */
-#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI 9 */
-#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11 11
-#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
/*
* Sound core interface functions
*/
@@ -43,6 +18,4 @@ extern void unregister_sound_special(int unit);
extern void unregister_sound_mixer(int unit);
extern void unregister_sound_midi(int unit);
extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index dfcf86f..96c79cb 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1,5 +1,3 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
/*
* Copyright by Hannu Savolainen 1993-1997
*
@@ -23,174 +21,12 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION 0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
# include <asm/byteorder.h>
-#else
-# include <endian.h>
-#endif
-
-/*
- * Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB 1
-#define SNDCARD_SB 2
-#define SNDCARD_PAS 3
-#define SNDCARD_GUS 4
-#define SNDCARD_MPU401 5
-#define SNDCARD_SB16 6
-#define SNDCARD_SB16MIDI 7
-#define SNDCARD_UART6850 8
-#define SNDCARD_GUS16 9
-#define SNDCARD_MSS 10
-#define SNDCARD_PSS 11
-#define SNDCARD_SSCAPE 12
-#define SNDCARD_PSS_MPU 13
-#define SNDCARD_PSS_MSS 14
-#define SNDCARD_SSCAPE_MSS 15
-#define SNDCARD_TRXPRO 16
-#define SNDCARD_TRXPRO_SB 17
-#define SNDCARD_TRXPRO_MPU 18
-#define SNDCARD_MAD16 19
-#define SNDCARD_MAD16_MPU 20
-#define SNDCARD_CS4232 21
-#define SNDCARD_CS4232_MPU 22
-#define SNDCARD_MAUI 23
-#define SNDCARD_PSEUDO_MSS 24
-#define SNDCARD_GUSPNP 25
-#define SNDCARD_UART401 26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define SIOCPARM_MASK IOCPARM_MASK
-#define SIOC_VOID IOC_VOID
-#define SIOC_OUT IOC_OUT
-#define SIOC_IN IOC_IN
-#define SIOC_INOUT IOC_INOUT
-#define _SIOC_SIZE _IOC_SIZE
-#define _SIOC_DIR _IOC_DIR
-#define _SIOC_NONE _IOC_NONE
-#define _SIOC_READ _IOC_READ
-#define _SIOC_WRITE _IOC_WRITE
-#define _SIO _IO
-#define _SIOR _IOR
-#define _SIOW _IOW
-#define _SIOWR _IOWR
-#else
+#include <uapi/linux/soundcard.h>
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word. The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define SIOCTYPE (0xff<<8) */
-#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */
-#define SIOC_VOID 0x00000000 /* no parameters */
-#define SIOC_OUT 0x20000000 /* copy out parameters */
-#define SIOC_IN 0x40000000 /* copy in parameters */
-#define SIOC_INOUT (SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y))
-#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK)
-#define _SIOC_DIR(x) (x & 0xf0000000)
-#define _SIOC_NONE SIOC_VOID
-#define _SIOC_READ SIOC_OUT
-#define _SIOC_WRITE SIOC_IN
-# endif /* _IOWR */
-#endif /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET _SIO ('Q', 0)
-#define SNDCTL_SEQ_SYNC _SIO ('Q', 1)
-#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */
-#define SNDCTL_SEQ_PANIC _SIO ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
- int devno; /* Synthesizer # */
- char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
- int devno; /* Synthesizer # */
- int bankno; /* MIDI bank # (0=General MIDI) */
- int instrno; /* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
- unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int)
-#define SNDCTL_TMR_START _SIO ('T', 2)
-#define SNDCTL_TMR_STOP _SIO ('T', 3)
-#define SNDCTL_TMR_CONTINUE _SIO ('T', 4)
-#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int)
-# define TMR_INTERNAL 0x00000001
-# define TMR_EXTERNAL 0x00000002
-# define TMR_MODE_MIDI 0x00000010
-# define TMR_MODE_FSK 0x00000020
-# define TMR_MODE_CLS 0x00000040
-# define TMR_MODE_SMPTE 0x00000080
-#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
# if defined(__BIG_ENDIAN)
# define AFMT_S16_NE AFMT_S16_BE
# elif defined(__LITTLE_ENDIAN)
@@ -198,1095 +34,4 @@ typedef struct seq_event_rec {
# else
# error "could not determine byte order"
# endif
-#else
-# if defined(__BYTE_ORDER)
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define AFMT_S16_NE AFMT_S16_BE
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-# define AFMT_S16_NE AFMT_S16_LE
-# else
-# error "could not determine byte order"
-# endif
-# endif
-#endif
-
-/*
- * Sample loading mechanism for internal synthesizers (/dev/sequencer)
- * The following patch_info structure has been designed to support
- * Gravis UltraSound. It tries to be universal format for uploading
- * sample based patches but is probably too limited.
- *
- * (PBD) As Hannu guessed, the GUS structure is too limited for
- * the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
- unsigned short key; /* Use WAVE_PATCH here */
-#define WAVE_PATCH _PATCHKEY(0x04)
-#define GUS_PATCH WAVE_PATCH
-#define WAVEFRONT_PATCH _PATCHKEY(0x06)
-
- short device_no; /* Synthesizer number */
- short instr_no; /* Midi pgm# */
-
- unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */
- /* (use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */
-#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */
-#define WAVE_SCALE 0x00040000 /* The scaling info is valid */
-#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM 0x40000000 /* For future use */
-#define WAVE_MULAW 0x20000000 /* For future use */
-/* Other bits must be zeroed */
-
- int len; /* Size of the wave data in bytes */
- int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/*
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
- unsigned int base_freq;
- unsigned int base_note;
- unsigned int high_note;
- unsigned int low_note;
- int panning; /* -128=left, 127=right */
- int detuning;
-
-/* New fields introduced in version 1.99.5 */
-
- /* Envelope. Enabled by mode bit WAVE_ENVELOPES */
- unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */
- unsigned char env_offset[ 6 ]; /* 255 == 100% */
-
- /*
- * The tremolo, vibrato and scale info are not supported yet.
- * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
- * WAVE_SCALE
- */
-
- unsigned char tremolo_sweep;
- unsigned char tremolo_rate;
- unsigned char tremolo_depth;
-
- unsigned char vibrato_sweep;
- unsigned char vibrato_rate;
- unsigned char vibrato_depth;
-
- int scale_frequency;
- unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */
-
- int volume;
- int fractions;
- int reserved1;
- int spare[2];
- char data[1]; /* The waveform data starts here */
- };
-
-struct sysex_info {
- short key; /* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH _PATCHKEY(0x05)
-#define MAUI_PATCH _PATCHKEY(0x06)
- short device_no; /* Synthesizer number */
- int len; /* Size of the sysex data in bytes */
- unsigned char data[1]; /* Sysex data starts here */
- };
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size.
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF 0
-#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */
-#define SEQ_NOTEON 1
-#define SEQ_FMNOTEON SEQ_NOTEON
-#define SEQ_WAIT TMR_WAIT_ABS
-#define SEQ_PGMCHANGE 3
-#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER TMR_START
-#define SEQ_MIDIPUTC 5
-#define SEQ_DRUMON 6 /*** OBSOLETE ***/
-#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/
-#define SEQ_ECHO TMR_ECHO /* For synching programs with output */
-#define SEQ_AFTERTOUCH 9
-#define SEQ_CONTROLLER 10
-
-/*******************************************
- * Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define CTL_BANK_SELECT 0x00
-#define CTL_MODWHEEL 0x01
-#define CTL_BREATH 0x02
-/* undefined 0x03 */
-#define CTL_FOOT 0x04
-#define CTL_PORTAMENTO_TIME 0x05
-#define CTL_DATA_ENTRY 0x06
-#define CTL_MAIN_VOLUME 0x07
-#define CTL_BALANCE 0x08
-/* undefined 0x09 */
-#define CTL_PAN 0x0a
-#define CTL_EXPRESSION 0x0b
-/* undefined 0x0c */
-/* undefined 0x0d */
-/* undefined 0x0e */
-/* undefined 0x0f */
-#define CTL_GENERAL_PURPOSE1 0x10
-#define CTL_GENERAL_PURPOSE2 0x11
-#define CTL_GENERAL_PURPOSE3 0x12
-#define CTL_GENERAL_PURPOSE4 0x13
-/* undefined 0x14 - 0x1f */
-
-/* undefined 0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define CTL_DAMPER_PEDAL 0x40
-#define CTL_SUSTAIN 0x40 /* Alias */
-#define CTL_HOLD 0x40 /* Alias */
-#define CTL_PORTAMENTO 0x41
-#define CTL_SOSTENUTO 0x42
-#define CTL_SOFT_PEDAL 0x43
-/* undefined 0x44 */
-#define CTL_HOLD2 0x45
-/* undefined 0x46 - 0x4f */
-
-#define CTL_GENERAL_PURPOSE5 0x50
-#define CTL_GENERAL_PURPOSE6 0x51
-#define CTL_GENERAL_PURPOSE7 0x52
-#define CTL_GENERAL_PURPOSE8 0x53
-/* undefined 0x54 - 0x5a */
-#define CTL_EXT_EFF_DEPTH 0x5b
-#define CTL_TREMOLO_DEPTH 0x5c
-#define CTL_CHORUS_DEPTH 0x5d
-#define CTL_DETUNE_DEPTH 0x5e
-#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */
-#define CTL_PHASER_DEPTH 0x5f
-#define CTL_DATA_INCREMENT 0x60
-#define CTL_DATA_DECREMENT 0x61
-#define CTL_NONREG_PARM_NUM_LSB 0x62
-#define CTL_NONREG_PARM_NUM_MSB 0x63
-#define CTL_REGIST_PARM_NUM_LSB 0x64
-#define CTL_REGIST_PARM_NUM_MSB 0x65
-/* undefined 0x66 - 0x78 */
-/* reserved 0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define CTRL_PITCH_BENDER 255
-#define CTRL_PITCH_BENDER_RANGE 254
-#define CTRL_EXPRESSION 253 /* Obsolete */
-#define CTRL_MAIN_VOLUME 252 /* Obsolete */
-#define SEQ_BALANCE 11
-#define SEQ_VOLMODE 12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO 1
-#define VOL_METHOD_LINEAR 2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- * input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE 0xfd /* Long events */
-/*
- * SEQ_FULLSIZE events are used for loading patches/samples to the
- * synthesizer devices. These events are passed directly to the driver
- * of the associated synthesizer device. There is no limit to the size
- * of the extended events. These events are not queued but executed
- * immediately when the write() is called (execution can take several
- * seconds of time).
- *
- * When a SEQ_FULLSIZE message is written to the device, it must
- * be written using exactly one write() call. Other events cannot
- * be mixed to the same write.
- *
- * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the
- * /dev/sequencer. Don't write other data together with the instrument structure
- * Set the key field of the structure to FM_PATCH. The device field is used to
- * route the patch to the corresponding device.
- *
- * For wave table use struct patch_info. Initialize the key field
- * to WAVE_PATCH.
- */
-#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
- unsigned short key; /* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH _PATCHKEY(0x01)
-#define OPL3_PATCH _PATCHKEY(0x03)
- short device; /* Synth# (0-4) */
- int channel; /* Program# to be initialized */
- sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */
- };
-
-struct synth_info { /* Read only */
- char name[30];
- int device; /* 0-N. INITIALIZE BEFORE CALLING */
- int synth_type;
-#define SYNTH_TYPE_FM 0
-#define SYNTH_TYPE_SAMPLE 1
-#define SYNTH_TYPE_MIDI 2 /* Midi interface */
-
- int synth_subtype;
-#define FM_TYPE_ADLIB 0x00
-#define FM_TYPE_OPL3 0x01
-#define MIDI_TYPE_MPU401 0x401
-
-#define SAMPLE_TYPE_BASIC 0x10
-#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT 0x11
-
- int perc_mode; /* No longer supported */
- int nr_voices;
- int nr_drums; /* Obsolete field */
- int instr_bank_size;
- unsigned int capabilities;
-#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */
- int dummies[19]; /* Reserve space */
- };
-
-struct sound_timer_info {
- char name[32];
- int caps;
- };
-
-#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */
-
-struct midi_info {
- char name[30];
- int device; /* 0-N. INITIALIZE BEFORE CALLING */
- unsigned int capabilities; /* To be defined later */
- int dev_type;
- int dummies[18]; /* Reserve space */
- };
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
- unsigned char cmd;
- char nr_args, nr_returns;
- unsigned char data[30];
- } mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET _SIO ('P', 0)
-#define SNDCTL_DSP_SYNC _SIO ('P', 1)
-#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST _SIO ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int)
-
-/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/
-# define AFMT_QUERY 0x00000000 /* Return current fmt */
-# define AFMT_MU_LAW 0x00000001
-# define AFMT_A_LAW 0x00000002
-# define AFMT_IMA_ADPCM 0x00000004
-# define AFMT_U8 0x00000008
-# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/
-# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */
-# define AFMT_S8 0x00000040
-# define AFMT_U16_LE 0x00000080 /* Little endian U16 */
-# define AFMT_U16_BE 0x00000100 /* Big endian U16 */
-# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */
-# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
- int fragments; /* # of available fragments (partially usend ones not counted) */
- int fragstotal; /* Total # of fragments allocated */
- int fragsize; /* Size of a fragment in bytes */
-
- int bytes; /* Available space in bytes (includes partially used fragments) */
- /* Note! 'bytes' could be more than fragments*fragsize */
- } audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK _SIO ('P',14)
-#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int)
-# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */
-# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */
-# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */
-# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */
- /* internal buffers which may */
- /* cause some delays and */
- /* decrease precision of timing */
-# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */
- /* Sometimes it's a DSP */
- /* but usually not */
-# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */
-# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */
-# define DSP_CAP_MULTI 0x00004000 /* support multiple open */
-# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int)
-# define PCM_ENABLE_INPUT 0x00000001
-# define PCM_ENABLE_OUTPUT 0x00000002
-
-typedef struct count_info {
- int bytes; /* Total # of bytes processed */
- int blocks; /* # of fragment transitions since last time */
- int ptr; /* Current DMA pointer value */
- } count_info;
-
-#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
- unsigned *buffer;
- int size;
- } buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22)
-#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int)
-# define DSP_BIND_QUERY 0x00000000
-# define DSP_BIND_FRONT 0x00000001
-# define DSP_BIND_SURR 0x00000002
-# define DSP_BIND_CENTER_LFE 0x00000004
-# define DSP_BIND_HANDSET 0x00000008
-# define DSP_BIND_MIC 0x00000010
-# define DSP_BIND_MODEM1 0x00000020
-# define DSP_BIND_MODEM2 0x00000040
-# define DSP_BIND_I2S 0x00000080
-# define DSP_BIND_SPDIF 0x00000100
-
-#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int)
-# define SPDIF_PRO 0x0001
-# define SPDIF_N_AUD 0x0002
-# define SPDIF_COPY 0x0004
-# define SPDIF_PRE 0x0008
-# define SPDIF_CC 0x07f0
-# define SPDIF_L 0x0800
-# define SPDIF_DRS 0x4000
-# define SPDIF_V 0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- *
- * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- * playback buffer whenever an underrun occurs. This consumes some time
- * prevents looping the existing buffer.
- * APF_CPUINTENS is intended to be set by CPU intensive applications which
- * are likely to run out of time occasionally. In this mode the buffer cleanup is
- * disabled which saves CPU time but also let's the previous buffer content to
- * be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int)
-#define APF_NORMAL 0 /* Normal applications */
-#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */
-#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST SNDCTL_DSP_POST
-#define SOUND_PCM_RESET SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
- int command; /* Set to 0 if not used */
- int flags;
-#define CPF_NONE 0x0000
-#define CPF_FIRST 0x0001 /* First block */
-#define CPF_LAST 0x0002 /* Last block */
- int len;
- int offs; /* If required by the device (0 if not used) */
-
- unsigned char data[4000]; /* NOTE! 4000 is not 4k */
- } copr_buffer;
-
-typedef struct copr_debug_buf {
- int command; /* Used internally. Set to 0 */
- int parm1;
- int parm2;
- int flags;
- int len; /* Length of data in bytes */
- } copr_debug_buf;
-
-typedef struct copr_msg {
- int len;
- unsigned char data[4000];
- } copr_msg;
-
-#define SNDCTL_COPR_RESET _SIO ('C', 0)
-#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer)
-#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf)
-#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf)
-#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg)
-#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-
-/*
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum.
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES 25
-#define SOUND_MIXER_VOLUME 0
-#define SOUND_MIXER_BASS 1
-#define SOUND_MIXER_TREBLE 2
-#define SOUND_MIXER_SYNTH 3
-#define SOUND_MIXER_PCM 4
-#define SOUND_MIXER_SPEAKER 5
-#define SOUND_MIXER_LINE 6
-#define SOUND_MIXER_MIC 7
-#define SOUND_MIXER_CD 8
-#define SOUND_MIXER_IMIX 9 /* Recording monitor */
-#define SOUND_MIXER_ALTPCM 10
-#define SOUND_MIXER_RECLEV 11 /* Recording level */
-#define SOUND_MIXER_IGAIN 12 /* Input gain */
-#define SOUND_MIXER_OGAIN 13 /* Output gain */
-/*
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */
-#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */
-#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */
-#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN 20 /* Phone input */
-#define SOUND_MIXER_PHONEOUT 21 /* Phone output */
-#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO 23 /* Radio in */
-#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN 28
-#define SOUND_ONOFF_MAX 30
-
-/* Note! Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE 31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \
- "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \
- "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
- "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
- "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
- "line1", "line2", "line3", "dig1", "dig2", "dig3", \
- "phin", "phout", "video", "radio", "monitor"}
-
-/* Device bitmask identifiers */
-
-#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS 0xfc
-# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */
-
-/* Device mask bits */
-
-#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD (1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev) _SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev) _SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
- char id[16];
- char name[32];
- int modify_counter;
- int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
- char id[16];
- char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
- int num; /* Index to volume table */
- char name[32];
- int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table)
-
-/*
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION _SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event:
- *
- * 0x8X = system level events,
- * 0x9X = device/port specific events, event[1] = device/port,
- * The last 4 bits give the subtype:
- * 0x02 = Channel event (event[3] = chn).
- * 0x01 = note event (event[4] = note).
- * (0x01 is not used alone but always with bit 0x02).
- * event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL 0x80
-#define EV_TIMING 0x81
-#define EV_CHN_COMMON 0x92
-#define EV_CHN_VOICE 0x93
-#define EV_SYSEX 0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF 0x80
-#define MIDI_NOTEON 0x90
-#define MIDI_KEY_PRESSURE 0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE 0xB0
-#define MIDI_PGM_CHANGE 0xC0
-#define MIDI_CHN_PRESSURE 0xD0
-#define MIDI_PITCH_BEND 0xE0
-
-#define MIDI_SYSTEM_PREFIX 0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL 1 /* Time relative to the prev time */
-#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */
-#define TMR_STOP 3
-#define TMR_START 4
-#define TMR_CONTINUE 5
-#define TMR_TEMPO 6
-#define TMR_ECHO 8
-#define TMR_CLOCK 9 /* MIDI clock */
-#define TMR_SPP 10 /* Song position pointer */
-#define TMR_TIMESIG 11 /* Time signature */
-
-/*
- * Local event types
- */
-#define LOCL_STARTAUDIO 1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- * Some convenience macros to simplify programming of the
- * /dev/sequencer interface
- *
- * This is a legacy interface for applications written against
- * the OSSlib-3.8 style interface. It is no longer possible
- * to actually link against OSSlib with this header, but we
- * still provide these macros for programs using them.
- *
- * If you want to use OSSlib, it is recommended that you get
- * the GPL version of OSS-4.x and build against that version
- * of the header.
- *
- * We redefine the extern keyword so that make headers_check
- * does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void); /* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
- _SEQ_EXTERN unsigned char _seqbuf[]; \
- _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes
- *
- * int seqfd; -- The file descriptor for /dev/sequencer.
- *
- * void
- * seqbuf_dump ()
- * {
- * if (_seqbufptr)
- * if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- * {
- * perror ("write /dev/sequencer");
- * exit (-1);
- * }
- * _seqbufptr = 0;
- * }
- */
-
-#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len) _seqbufptr += len
-#define SEQ_DUMPBUF seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- *
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf name of the buffer (unsigned char[])
- * #define _SEQ_ADVBUF(len) If the applic needs to know the exact
- * size of the event, this macro can be used.
- * Otherwise this must be defined as empty.
- * #define _seqbufptr Define the name of index variable or 0 if
- * not required.
- */
-#define _SEQ_NEEDBUF(len) /* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
- _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
- _seqbuf[_seqbufptr+2] = (dev);\
- _seqbuf[_seqbufptr+3] = (mode);\
- _seqbuf[_seqbufptr+4] = 0;\
- _seqbuf[_seqbufptr+5] = 0;\
- _seqbuf[_seqbufptr+6] = 0;\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
- {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_CHN_VOICE;\
- _seqbuf[_seqbufptr+1] = (dev);\
- _seqbuf[_seqbufptr+2] = (event);\
- _seqbuf[_seqbufptr+3] = (chn);\
- _seqbuf[_seqbufptr+4] = (note);\
- _seqbuf[_seqbufptr+5] = (parm);\
- _seqbuf[_seqbufptr+6] = (0);\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
- _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
- _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
- _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
- {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_CHN_COMMON;\
- _seqbuf[_seqbufptr+1] = (dev);\
- _seqbuf[_seqbufptr+2] = (event);\
- _seqbuf[_seqbufptr+3] = (chn);\
- _seqbuf[_seqbufptr+4] = (p1);\
- _seqbuf[_seqbufptr+5] = (p2);\
- *(short *)&_seqbuf[_seqbufptr+6] = (w14);\
- _SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
- {int ii, ll=(len); \
- unsigned char *bufp=buf;\
- if (ll>6)ll=6;\
- _SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_SYSEX;\
- _seqbuf[_seqbufptr+1] = (dev);\
- for(ii=0;ii<ll;ii++)\
- _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
- for(ii=ll;ii<6;ii++)\
- _seqbuf[_seqbufptr+ii+2] = 0xff;\
- _SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
- _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
- _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
- _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
- _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
- _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
- _seqbuf[_seqbufptr+2] = (dev);\
- _seqbuf[_seqbufptr+3] = (voice);\
- _seqbuf[_seqbufptr+4] = (controller);\
- _seqbuf[_seqbufptr+5] = ((value)&0xff);\
- _seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr+0] = EV_TIMING; \
- _seqbuf[_seqbufptr+1] = (ev); \
- _seqbuf[_seqbufptr+2] = 0;\
- _seqbuf[_seqbufptr+3] = 0;\
- *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
- _SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
- _seqbuf[_seqbufptr+1] = (ev); \
- _seqbuf[_seqbufptr+2] = 0;\
- _seqbuf[_seqbufptr+3] = 0;\
- *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
- _SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only
- */
-
-#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\
- _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
- _seqbuf[_seqbufptr+1] = (byte);\
- _seqbuf[_seqbufptr+2] = (device);\
- _seqbuf[_seqbufptr+3] = 0;\
- _SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
- {if (_seqbufptr) SEQ_DUMPBUF();\
- if (write(seqfd, (char*)(patchx), len)==-1) \
- perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
- (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
#endif
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 4613240..075cb0c 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -1,52 +1,10 @@
#ifndef _LINUX_STAT_H
#define _LINUX_STAT_H
-#ifdef __KERNEL__
#include <asm/stat.h>
+#include <uapi/linux/stat.h>
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT 00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK 0120000
-#define S_IFREG 0100000
-#define S_IFBLK 0060000
-#define S_IFDIR 0040000
-#define S_IFCHR 0020000
-#define S_IFIFO 0010000
-#define S_ISUID 0004000
-#define S_ISGID 0002000
-#define S_ISVTX 0001000
-
-#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
#define S_IRWXUGO (S_IRWXU|S_IRWXG|S_IRWXO)
#define S_IALLUGO (S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
#define S_IRUGO (S_IRUSR|S_IRGRP|S_IROTH)
@@ -77,5 +35,3 @@ struct kstat {
};
#endif
-
-#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 1747b67..f4aec0e 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -1,9 +1,8 @@
#ifndef _LINUX_STDDEF_H
#define _LINUX_STDDEF_H
-#include <linux/compiler.h>
+#include <uapi/linux/stddef.h>
-#ifdef __KERNEL__
#undef NULL
#define NULL ((void *)0)
@@ -19,6 +18,4 @@ enum {
#else
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
#endif
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/string.h b/include/linux/string.h
index b917881..63012581 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -1,16 +1,12 @@
#ifndef _LINUX_STRING_H_
#define _LINUX_STRING_H_
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <stdarg.h>
+#include <uapi/linux/string.h>
extern char *strndup_user(const char __user *, long);
extern void *memdup_user(const void __user *, size_t);
@@ -147,5 +143,4 @@ static inline bool strstarts(const char *str, const char *prefix)
extern size_t memweight(const void *ptr, size_t bytes);
-#endif /* __KERNEL__ */
#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/suspend_ioctls.h b/include/linux/suspend_ioctls.h
deleted file mode 100644
index 0b30382..0000000
--- a/include/linux/suspend_ioctls.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _LINUX_SUSPEND_IOCTLS_H
-#define _LINUX_SUSPEND_IOCTLS_H
-
-#include <linux/types.h>
-/*
- * This structure is used to pass the values needed for the identification
- * of the resume swap area from a user space to the kernel via the
- * SNAPSHOT_SET_SWAP_AREA ioctl
- */
-struct resume_swap_area {
- __kernel_loff_t offset;
- __u32 dev;
-} __attribute__((packed));
-
-#define SNAPSHOT_IOC_MAGIC '3'
-#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
-#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
-#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
-#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
-#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
-#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
-#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
- struct resume_swap_area)
-#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t)
-#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15)
-#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16)
-#define SNAPSHOT_CREATE_IMAGE _IOW(SNAPSHOT_IOC_MAGIC, 17, int)
-#define SNAPSHOT_PREF_IMAGE_SIZE _IO(SNAPSHOT_IOC_MAGIC, 18)
-#define SNAPSHOT_AVAIL_SWAP_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t)
-#define SNAPSHOT_ALLOC_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t)
-#define SNAPSHOT_IOC_MAXNR 20
-
-#endif /* _LINUX_SUSPEND_IOCTLS_H */
diff --git a/include/linux/swab.h b/include/linux/swab.h
index ea0c02f..9ad3c60 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -1,284 +1,8 @@
#ifndef _LINUX_SWAB_H
#define _LINUX_SWAB_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
+#include <uapi/linux/swab.h>
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)( \
- (((__u16)(x) & (__u16)0x00ffU) << 8) | \
- (((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
- (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \
- (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \
- (((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)( \
- (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \
- (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \
- (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \
- (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \
- (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \
- (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
- (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \
- (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \
- (((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \
- (((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
- return __arch_swab16(val);
-#else
- return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
- return __arch_swab32(val);
-#else
- return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
- return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
- __u32 h = val >> 32;
- __u32 l = val & ((1ULL << 32) - 1);
- return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
- return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
- return __arch_swahw32(val);
-#else
- return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
- return __arch_swahb32(val);
-#else
- return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x) \
- (__builtin_constant_p((__u16)(x)) ? \
- ___constant_swab16(x) : \
- __fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swab32(x) : \
- __fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x) \
- (__builtin_constant_p((__u64)(x)) ? \
- ___constant_swab64(x) : \
- __fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swahw32(x) : \
- __fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swahb32(x) : \
- __fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
- return __arch_swab16p(p);
-#else
- return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
- return __arch_swab32p(p);
-#else
- return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
- return __arch_swab64p(p);
-#else
- return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
- return __arch_swahw32p(p);
-#else
- return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
- return __arch_swahb32p(p);
-#else
- return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
- __arch_swab16s(p);
-#else
- *p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
- __arch_swab32s(p);
-#else
- *p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
- __arch_swab64s(p);
-#else
- *p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
- __arch_swahw32s(p);
-#else
- *p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
- __arch_swahb32s(p);
-#else
- *p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
# define swab16 __swab16
# define swab32 __swab32
# define swab64 __swab64
@@ -294,6 +18,4 @@ static inline void __swahb32s(__u32 *p)
# define swab64s __swab64s
# define swahw32s __swahw32s
# define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SWAB_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 2e7d81c..f1405b1 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -8,295 +8,11 @@
* Redistribution of this file is permitted under
* the terms of the GNU Public License (GPL)
*/
-
#ifndef _SYNCLINK_H_
#define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
-
-#include <linux/types.h>
-
-#define BIT0 0x0001
-#define BIT1 0x0002
-#define BIT2 0x0004
-#define BIT3 0x0008
-#define BIT4 0x0010
-#define BIT5 0x0020
-#define BIT6 0x0040
-#define BIT7 0x0080
-#define BIT8 0x0100
-#define BIT9 0x0200
-#define BIT10 0x0400
-#define BIT11 0x0800
-#define BIT12 0x1000
-#define BIT13 0x2000
-#define BIT14 0x4000
-#define BIT15 0x8000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE 65535
-#define MAX_ASYNC_TRANSMIT 4096
-#define MAX_ASYNC_BUFFER_SIZE 4096
-
-#define ASYNC_PARITY_NONE 0
-#define ASYNC_PARITY_EVEN 1
-#define ASYNC_PARITY_ODD 2
-#define ASYNC_PARITY_SPACE 3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG 0x0002
-#define HDLC_FLAG_UNDERRUN_CRC 0x0004
-#define HDLC_FLAG_SHARE_ZERO 0x0010
-#define HDLC_FLAG_AUTO_CTS 0x0020
-#define HDLC_FLAG_AUTO_DCD 0x0040
-#define HDLC_FLAG_AUTO_RTS 0x0080
-#define HDLC_FLAG_RXC_DPLL 0x0100
-#define HDLC_FLAG_RXC_BRG 0x0200
-#define HDLC_FLAG_RXC_TXCPIN 0x8000
-#define HDLC_FLAG_RXC_RXCPIN 0x0000
-#define HDLC_FLAG_TXC_DPLL 0x0400
-#define HDLC_FLAG_TXC_BRG 0x0800
-#define HDLC_FLAG_TXC_TXCPIN 0x0000
-#define HDLC_FLAG_TXC_RXCPIN 0x0008
-#define HDLC_FLAG_DPLL_DIV8 0x1000
-#define HDLC_FLAG_DPLL_DIV16 0x2000
-#define HDLC_FLAG_DPLL_DIV32 0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE 0x4000
-
-#define HDLC_CRC_NONE 0
-#define HDLC_CRC_16_CCITT 1
-#define HDLC_CRC_32_CCITT 2
-#define HDLC_CRC_MASK 0x00ff
-#define HDLC_CRC_RETURN_EX 0x8000
-
-#define RX_OK 0
-#define RX_CRC_ERROR 1
-
-#define HDLC_TXIDLE_FLAGS 0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES 1
-#define HDLC_TXIDLE_ZEROS 2
-#define HDLC_TXIDLE_ONES 3
-#define HDLC_TXIDLE_ALT_MARK_SPACE 4
-#define HDLC_TXIDLE_SPACE 5
-#define HDLC_TXIDLE_MARK 6
-#define HDLC_TXIDLE_CUSTOM_8 0x10000000
-#define HDLC_TXIDLE_CUSTOM_16 0x20000000
-
-#define HDLC_ENCODING_NRZ 0
-#define HDLC_ENCODING_NRZB 1
-#define HDLC_ENCODING_NRZI_MARK 2
-#define HDLC_ENCODING_NRZI_SPACE 3
-#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK 4
-#define HDLC_ENCODING_BIPHASE_SPACE 5
-#define HDLC_ENCODING_BIPHASE_LEVEL 6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS 0
-#define HDLC_PREAMBLE_LENGTH_16BITS 1
-#define HDLC_PREAMBLE_LENGTH_32BITS 2
-#define HDLC_PREAMBLE_LENGTH_64BITS 3
-
-#define HDLC_PREAMBLE_PATTERN_NONE 0
-#define HDLC_PREAMBLE_PATTERN_ZEROS 1
-#define HDLC_PREAMBLE_PATTERN_FLAGS 2
-#define HDLC_PREAMBLE_PATTERN_10 3
-#define HDLC_PREAMBLE_PATTERN_01 4
-#define HDLC_PREAMBLE_PATTERN_ONES 5
-
-#define MGSL_MODE_ASYNC 1
-#define MGSL_MODE_HDLC 2
-#define MGSL_MODE_MONOSYNC 3
-#define MGSL_MODE_BISYNC 4
-#define MGSL_MODE_RAW 6
-#define MGSL_MODE_BASE_CLOCK 7
-#define MGSL_MODE_XSYNC 8
-
-#define MGSL_BUS_TYPE_ISA 1
-#define MGSL_BUS_TYPE_EISA 2
-#define MGSL_BUS_TYPE_PCI 5
-
-#define MGSL_INTERFACE_MASK 0xf
-#define MGSL_INTERFACE_DISABLE 0
-#define MGSL_INTERFACE_RS232 1
-#define MGSL_INTERFACE_V35 2
-#define MGSL_INTERFACE_RS422 3
-#define MGSL_INTERFACE_RTS_EN 0x10
-#define MGSL_INTERFACE_LL 0x20
-#define MGSL_INTERFACE_RL 0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
- /* Common */
-
- unsigned long mode; /* Asynchronous or HDLC */
- unsigned char loopback; /* internal loopback mode */
-
- /* HDLC Only */
-
- unsigned short flags;
- unsigned char encoding; /* NRZ, NRZI, etc. */
- unsigned long clock_speed; /* external clock speed in bits per second */
- unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */
- unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */
- unsigned char preamble_length;
- unsigned char preamble;
- /* Async Only */
+#include <uapi/linux/synclink.h>
- unsigned long data_rate; /* bits per second */
- unsigned char data_bits; /* 7 or 8 data bits */
- unsigned char stop_bits; /* 1 or 2 stop bits */
- unsigned char parity; /* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID 0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK 0
-#define DiagStatus_AddressFailure 1
-#define DiagStatus_AddressConflict 2
-#define DiagStatus_IrqFailure 3
-#define DiagStatus_IrqConflict 4
-#define DiagStatus_DmaFailure 5
-#define DiagStatus_DmaConflict 6
-#define DiagStatus_PciAdapterNotFound 7
-#define DiagStatus_CantAssignPciResources 8
-#define DiagStatus_CantAssignPciMemAddr 9
-#define DiagStatus_CantAssignPciIoAddr 10
-#define DiagStatus_CantAssignPciIrq 11
-#define DiagStatus_MemoryError 12
-
-#define SerialSignal_DCD 0x01 /* Data Carrier Detect */
-#define SerialSignal_TXD 0x02 /* Transmit Data */
-#define SerialSignal_RI 0x04 /* Ring Indicator */
-#define SerialSignal_RXD 0x08 /* Receive Data */
-#define SerialSignal_CTS 0x10 /* Clear to Send */
-#define SerialSignal_RTS 0x20 /* Request to Send */
-#define SerialSignal_DSR 0x40 /* Data Set Ready */
-#define SerialSignal_DTR 0x80 /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
- __u32 cts, dsr, rng, dcd, tx, rx;
- __u32 frame, parity, overrun, brk;
- __u32 buf_overrun;
- __u32 txok;
- __u32 txunder;
- __u32 txabort;
- __u32 txtimeout;
- __u32 rxshort;
- __u32 rxlong;
- __u32 rxabort;
- __u32 rxover;
- __u32 rxcrc;
- __u32 rxok;
- __u32 exithunt;
- __u32 rxidle;
-};
-
-struct gpio_desc {
- __u32 state;
- __u32 smask;
- __u32 dir;
- __u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA 1
-#define DEBUG_LEVEL_ERROR 2
-#define DEBUG_LEVEL_INFO 3
-#define DEBUG_LEVEL_BH 4
-#define DEBUG_LEVEL_ISR 5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive 0x0001
-#define MgslEvent_DsrInactive 0x0002
-#define MgslEvent_Dsr 0x0003
-#define MgslEvent_CtsActive 0x0004
-#define MgslEvent_CtsInactive 0x0008
-#define MgslEvent_Cts 0x000c
-#define MgslEvent_DcdActive 0x0010
-#define MgslEvent_DcdInactive 0x0020
-#define MgslEvent_Dcd 0x0030
-#define MgslEvent_RiActive 0x0040
-#define MgslEvent_RiInactive 0x0080
-#define MgslEvent_Ri 0x00c0
-#define MgslEvent_ExitHuntMode 0x0100
-#define MgslEvent_IdleReceived 0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE set current transmit idle mode
- * MGSL_IOCGTXIDLE get current transmit idle mode
- * MGSL_IOCTXENABLE enable or disable transmitter
- * MGSL_IOCRXENABLE enable or disable receiver
- * MGSL_IOCTXABORT abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS return current statistics
- * MGSL_IOCWAITEVENT wait for specified event to occur
- * MGSL_LOOPTXDONE transmit in HDLC LoopMode done
- * MGSL_IOCSIF set the serial interface type
- * MGSL_IOCGIF get the serial interface type
- */
-#define MGSL_MAGIC_IOC 'm'
-#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
/* provide 32 bit ioctl compatibility on 64 bit systems */
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -318,6 +34,4 @@ struct MGSL_PARAMS32 {
#define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
#define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
#endif
-#endif
-
#endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c34b4c8..cd844a6 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -18,921 +18,14 @@
****************************************************************
****************************************************************
*/
-
#ifndef _LINUX_SYSCTL_H
#define _LINUX_SYSCTL_H
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10 /* how many path components do we allow in a
- call to sysctl? In other words, what is
- the largest acceptable value for the nlen
- member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
- int __user *name;
- int nlen;
- void __user *oldval;
- size_t __user *oldlenp;
- void __user *newval;
- size_t newlen;
- unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
- CTL_KERN=1, /* General kernel info and control */
- CTL_VM=2, /* VM management */
- CTL_NET=3, /* Networking */
- CTL_PROC=4, /* removal breaks strace(1) compilation */
- CTL_FS=5, /* Filesystems */
- CTL_DEBUG=6, /* Debugging */
- CTL_DEV=7, /* Devices */
- CTL_BUS=8, /* Busses */
- CTL_ABI=9, /* Binary emulation */
- CTL_CPU=10, /* CPU stuff (speed scaling, etc) */
- CTL_ARLAN=254, /* arlan wireless driver */
- CTL_S390DBF=5677, /* s390 debug */
- CTL_SUNRPC=7249, /* sunrpc debug */
- CTL_PM=9899, /* frv power management */
- CTL_FRV=9898, /* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
- CTL_BUS_ISA=1 /* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
- INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */
- INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */
- INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
- KERN_OSTYPE=1, /* string: system version */
- KERN_OSRELEASE=2, /* string: system release */
- KERN_OSREV=3, /* int: system revision */
- KERN_VERSION=4, /* string: compile time info */
- KERN_SECUREMASK=5, /* struct: maximum rights mask */
- KERN_PROF=6, /* table: profiling information */
- KERN_NODENAME=7, /* string: hostname */
- KERN_DOMAINNAME=8, /* string: domainname */
-
- KERN_PANIC=15, /* int: panic timeout */
- KERN_REALROOTDEV=16, /* real root device to mount after initrd */
-
- KERN_SPARC_REBOOT=21, /* reboot command on Sparc */
- KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */
- KERN_PRINTK=23, /* struct: control printk logging parameters */
- KERN_NAMETRANS=24, /* Name translation */
- KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
- KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */
- KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
- KERN_MODPROBE=28, /* string: modprobe path */
- KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */
- KERN_ACCT=30, /* BSD process accounting parameters */
- KERN_PPC_L2CR=31, /* l2cr register on PPC */
-
- KERN_RTSIGNR=32, /* Number of rt sigs queued */
- KERN_RTSIGMAX=33, /* Max queuable */
-
- KERN_SHMMAX=34, /* long: Maximum shared memory segment */
- KERN_MSGMAX=35, /* int: Maximum size of a messege */
- KERN_MSGMNB=36, /* int: Maximum message queue size */
- KERN_MSGPOOL=37, /* int: Maximum system message pool size */
- KERN_SYSRQ=38, /* int: Sysreq enable */
- KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */
- KERN_RANDOM=40, /* Random driver */
- KERN_SHMALL=41, /* int: Maximum size of shared memory */
- KERN_MSGMNI=42, /* int: msg queue identifiers */
- KERN_SEM=43, /* struct: sysv semaphore limits */
- KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */
- KERN_SHMMNI=45, /* int: shm array identifiers */
- KERN_OVERFLOWUID=46, /* int: overflow UID */
- KERN_OVERFLOWGID=47, /* int: overflow GID */
- KERN_SHMPATH=48, /* string: path to shm fs */
- KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */
- KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
- KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */
- KERN_CORE_USES_PID=52, /* int: use core or core.%pid */
- KERN_TAINTED=53, /* int: various kernel tainted flags */
- KERN_CADPID=54, /* int: PID of the process to notify on CAD */
- KERN_PIDMAX=55, /* int: PID # limit */
- KERN_CORE_PATTERN=56, /* string: pattern for core-file names */
- KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */
- KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */
- KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */
- KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
- KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */
- KERN_PTY=62, /* dir: pty driver */
- KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */
- KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
- KERN_HZ_TIMER=65, /* int: hz timer on or off */
- KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
- KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
- KERN_RANDOMIZE=68, /* int: randomize virtual address space */
- KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
- KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
- KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
- KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
- KERN_COMPAT_LOG=73, /* int: print compat layer messages */
- KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
- KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
- KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
- VM_UNUSED1=1, /* was: struct: Set vm swapping control */
- VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */
- VM_UNUSED3=3, /* was: struct: Set free page thresholds */
- VM_UNUSED4=4, /* Spare */
- VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */
- VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */
- VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */
- VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */
- VM_UNUSED9=9, /* was: struct: Set page table cache parameters */
- VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */
- VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */
- VM_DIRTY_RATIO=12, /* dirty_ratio */
- VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */
- VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */
- VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
- VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
- VM_PAGEBUF=17, /* struct: Control pagebuf parameters */
- VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */
- VM_SWAPPINESS=19, /* Tendency to steal mapped memory */
- VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
- VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */
- VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */
- VM_LAPTOP_MODE=23, /* vm laptop mode */
- VM_BLOCK_DUMP=24, /* block dump mode */
- VM_HUGETLB_GROUP=25, /* permitted hugetlb group */
- VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
- VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
- VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
- VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */
- VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
- VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
- VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */
- VM_PANIC_ON_OOM=33, /* panic at out-of-memory */
- VM_VDSO_ENABLED=34, /* map VDSO into new processes? */
- VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
- NET_CORE=1,
- NET_ETHER=2,
- NET_802=3,
- NET_UNIX=4,
- NET_IPV4=5,
- NET_IPX=6,
- NET_ATALK=7,
- NET_NETROM=8,
- NET_AX25=9,
- NET_BRIDGE=10,
- NET_ROSE=11,
- NET_IPV6=12,
- NET_X25=13,
- NET_TR=14,
- NET_DECNET=15,
- NET_ECONET=16,
- NET_SCTP=17,
- NET_LLC=18,
- NET_NETFILTER=19,
- NET_DCCP=20,
- NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
- RANDOM_POOLSIZE=1,
- RANDOM_ENTROPY_COUNT=2,
- RANDOM_READ_THRESH=3,
- RANDOM_WRITE_THRESH=4,
- RANDOM_BOOT_ID=5,
- RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
- PTY_MAX=1,
- PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
- BUS_ISA_MEM_BASE=1,
- BUS_ISA_PORT_BASE=2,
- BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
- NET_CORE_WMEM_MAX=1,
- NET_CORE_RMEM_MAX=2,
- NET_CORE_WMEM_DEFAULT=3,
- NET_CORE_RMEM_DEFAULT=4,
-/* was NET_CORE_DESTROY_DELAY */
- NET_CORE_MAX_BACKLOG=6,
- NET_CORE_FASTROUTE=7,
- NET_CORE_MSG_COST=8,
- NET_CORE_MSG_BURST=9,
- NET_CORE_OPTMEM_MAX=10,
- NET_CORE_HOT_LIST_LENGTH=11,
- NET_CORE_DIVERT_VERSION=12,
- NET_CORE_NO_CONG_THRESH=13,
- NET_CORE_NO_CONG=14,
- NET_CORE_LO_CONG=15,
- NET_CORE_MOD_CONG=16,
- NET_CORE_DEV_WEIGHT=17,
- NET_CORE_SOMAXCONN=18,
- NET_CORE_BUDGET=19,
- NET_CORE_AEVENT_ETIME=20,
- NET_CORE_AEVENT_RSEQTH=21,
- NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
- NET_UNIX_DESTROY_DELAY=1,
- NET_UNIX_DELETE_DELAY=2,
- NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
- NET_NF_CONNTRACK_MAX=1,
- NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
- NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
- NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
- NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
- NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
- NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
- NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
- NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
- NET_NF_CONNTRACK_UDP_TIMEOUT=10,
- NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
- NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
- NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
- NET_NF_CONNTRACK_BUCKETS=14,
- NET_NF_CONNTRACK_LOG_INVALID=15,
- NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
- NET_NF_CONNTRACK_TCP_LOOSE=17,
- NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
- NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
- NET_NF_CONNTRACK_COUNT=27,
- NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
- NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
- NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
- NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
- NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
- /* v2.0 compatibile variables */
- NET_IPV4_FORWARD=8,
- NET_IPV4_DYNADDR=9,
-
- NET_IPV4_CONF=16,
- NET_IPV4_NEIGH=17,
- NET_IPV4_ROUTE=18,
- NET_IPV4_FIB_HASH=19,
- NET_IPV4_NETFILTER=20,
-
- NET_IPV4_TCP_TIMESTAMPS=33,
- NET_IPV4_TCP_WINDOW_SCALING=34,
- NET_IPV4_TCP_SACK=35,
- NET_IPV4_TCP_RETRANS_COLLAPSE=36,
- NET_IPV4_DEFAULT_TTL=37,
- NET_IPV4_AUTOCONFIG=38,
- NET_IPV4_NO_PMTU_DISC=39,
- NET_IPV4_TCP_SYN_RETRIES=40,
- NET_IPV4_IPFRAG_HIGH_THRESH=41,
- NET_IPV4_IPFRAG_LOW_THRESH=42,
- NET_IPV4_IPFRAG_TIME=43,
- NET_IPV4_TCP_MAX_KA_PROBES=44,
- NET_IPV4_TCP_KEEPALIVE_TIME=45,
- NET_IPV4_TCP_KEEPALIVE_PROBES=46,
- NET_IPV4_TCP_RETRIES1=47,
- NET_IPV4_TCP_RETRIES2=48,
- NET_IPV4_TCP_FIN_TIMEOUT=49,
- NET_IPV4_IP_MASQ_DEBUG=50,
- NET_TCP_SYNCOOKIES=51,
- NET_TCP_STDURG=52,
- NET_TCP_RFC1337=53,
- NET_TCP_SYN_TAILDROP=54,
- NET_TCP_MAX_SYN_BACKLOG=55,
- NET_IPV4_LOCAL_PORT_RANGE=56,
- NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
- NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
- NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
- NET_IPV4_ICMP_DESTUNREACH_RATE=60,
- NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
- NET_IPV4_ICMP_PARAMPROB_RATE=62,
- NET_IPV4_ICMP_ECHOREPLY_RATE=63,
- NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
- NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
- NET_TCP_TW_RECYCLE=66,
- NET_IPV4_ALWAYS_DEFRAG=67,
- NET_IPV4_TCP_KEEPALIVE_INTVL=68,
- NET_IPV4_INET_PEER_THRESHOLD=69,
- NET_IPV4_INET_PEER_MINTTL=70,
- NET_IPV4_INET_PEER_MAXTTL=71,
- NET_IPV4_INET_PEER_GC_MINTIME=72,
- NET_IPV4_INET_PEER_GC_MAXTIME=73,
- NET_TCP_ORPHAN_RETRIES=74,
- NET_TCP_ABORT_ON_OVERFLOW=75,
- NET_TCP_SYNACK_RETRIES=76,
- NET_TCP_MAX_ORPHANS=77,
- NET_TCP_MAX_TW_BUCKETS=78,
- NET_TCP_FACK=79,
- NET_TCP_REORDERING=80,
- NET_TCP_ECN=81,
- NET_TCP_DSACK=82,
- NET_TCP_MEM=83,
- NET_TCP_WMEM=84,
- NET_TCP_RMEM=85,
- NET_TCP_APP_WIN=86,
- NET_TCP_ADV_WIN_SCALE=87,
- NET_IPV4_NONLOCAL_BIND=88,
- NET_IPV4_ICMP_RATELIMIT=89,
- NET_IPV4_ICMP_RATEMASK=90,
- NET_TCP_TW_REUSE=91,
- NET_TCP_FRTO=92,
- NET_TCP_LOW_LATENCY=93,
- NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
- NET_IPV4_IGMP_MAX_MSF=96,
- NET_TCP_NO_METRICS_SAVE=97,
- NET_TCP_DEFAULT_WIN_SCALE=105,
- NET_TCP_MODERATE_RCVBUF=106,
- NET_TCP_TSO_WIN_DIVISOR=107,
- NET_TCP_BIC_BETA=108,
- NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
- NET_TCP_CONG_CONTROL=110,
- NET_TCP_ABC=111,
- NET_IPV4_IPFRAG_MAX_DIST=112,
- NET_TCP_MTU_PROBING=113,
- NET_TCP_BASE_MSS=114,
- NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
- NET_TCP_DMA_COPYBREAK=116,
- NET_TCP_SLOW_START_AFTER_IDLE=117,
- NET_CIPSOV4_CACHE_ENABLE=118,
- NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
- NET_CIPSOV4_RBM_OPTFMT=120,
- NET_CIPSOV4_RBM_STRICTVALID=121,
- NET_TCP_AVAIL_CONG_CONTROL=122,
- NET_TCP_ALLOWED_CONG_CONTROL=123,
- NET_TCP_MAX_SSTHRESH=124,
- NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
- NET_IPV4_ROUTE_FLUSH=1,
- NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
- NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
- NET_IPV4_ROUTE_GC_THRESH=4,
- NET_IPV4_ROUTE_MAX_SIZE=5,
- NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
- NET_IPV4_ROUTE_GC_TIMEOUT=7,
- NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
- NET_IPV4_ROUTE_REDIRECT_LOAD=9,
- NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
- NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
- NET_IPV4_ROUTE_ERROR_COST=12,
- NET_IPV4_ROUTE_ERROR_BURST=13,
- NET_IPV4_ROUTE_GC_ELASTICITY=14,
- NET_IPV4_ROUTE_MTU_EXPIRES=15,
- NET_IPV4_ROUTE_MIN_PMTU=16,
- NET_IPV4_ROUTE_MIN_ADVMSS=17,
- NET_IPV4_ROUTE_SECRET_INTERVAL=18,
- NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
- NET_PROTO_CONF_ALL=-2,
- NET_PROTO_CONF_DEFAULT=-3
-
- /* And device ifindices ... */
-};
-
-enum
-{
- NET_IPV4_CONF_FORWARDING=1,
- NET_IPV4_CONF_MC_FORWARDING=2,
- NET_IPV4_CONF_PROXY_ARP=3,
- NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
- NET_IPV4_CONF_SECURE_REDIRECTS=5,
- NET_IPV4_CONF_SEND_REDIRECTS=6,
- NET_IPV4_CONF_SHARED_MEDIA=7,
- NET_IPV4_CONF_RP_FILTER=8,
- NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
- NET_IPV4_CONF_BOOTP_RELAY=10,
- NET_IPV4_CONF_LOG_MARTIANS=11,
- NET_IPV4_CONF_TAG=12,
- NET_IPV4_CONF_ARPFILTER=13,
- NET_IPV4_CONF_MEDIUM_ID=14,
- NET_IPV4_CONF_NOXFRM=15,
- NET_IPV4_CONF_NOPOLICY=16,
- NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
- NET_IPV4_CONF_ARP_ANNOUNCE=18,
- NET_IPV4_CONF_ARP_IGNORE=19,
- NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
- NET_IPV4_CONF_ARP_ACCEPT=21,
- NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
- NET_IPV4_NF_CONNTRACK_MAX=1,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
- NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
- NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
- NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
- NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
- NET_IPV4_NF_CONNTRACK_BUCKETS=14,
- NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
- NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
- NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
- NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
- NET_IPV4_NF_CONNTRACK_COUNT=27,
- NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
-
-/* /proc/sys/net/ipv6 */
-enum {
- NET_IPV6_CONF=16,
- NET_IPV6_NEIGH=17,
- NET_IPV6_ROUTE=18,
- NET_IPV6_ICMP=19,
- NET_IPV6_BINDV6ONLY=20,
- NET_IPV6_IP6FRAG_HIGH_THRESH=21,
- NET_IPV6_IP6FRAG_LOW_THRESH=22,
- NET_IPV6_IP6FRAG_TIME=23,
- NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
- NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
- NET_IPV6_ROUTE_FLUSH=1,
- NET_IPV6_ROUTE_GC_THRESH=2,
- NET_IPV6_ROUTE_MAX_SIZE=3,
- NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
- NET_IPV6_ROUTE_GC_TIMEOUT=5,
- NET_IPV6_ROUTE_GC_INTERVAL=6,
- NET_IPV6_ROUTE_GC_ELASTICITY=7,
- NET_IPV6_ROUTE_MTU_EXPIRES=8,
- NET_IPV6_ROUTE_MIN_ADVMSS=9,
- NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
- NET_IPV6_FORWARDING=1,
- NET_IPV6_HOP_LIMIT=2,
- NET_IPV6_MTU=3,
- NET_IPV6_ACCEPT_RA=4,
- NET_IPV6_ACCEPT_REDIRECTS=5,
- NET_IPV6_AUTOCONF=6,
- NET_IPV6_DAD_TRANSMITS=7,
- NET_IPV6_RTR_SOLICITS=8,
- NET_IPV6_RTR_SOLICIT_INTERVAL=9,
- NET_IPV6_RTR_SOLICIT_DELAY=10,
- NET_IPV6_USE_TEMPADDR=11,
- NET_IPV6_TEMP_VALID_LFT=12,
- NET_IPV6_TEMP_PREFERED_LFT=13,
- NET_IPV6_REGEN_MAX_RETRY=14,
- NET_IPV6_MAX_DESYNC_FACTOR=15,
- NET_IPV6_MAX_ADDRESSES=16,
- NET_IPV6_FORCE_MLD_VERSION=17,
- NET_IPV6_ACCEPT_RA_DEFRTR=18,
- NET_IPV6_ACCEPT_RA_PINFO=19,
- NET_IPV6_ACCEPT_RA_RTR_PREF=20,
- NET_IPV6_RTR_PROBE_INTERVAL=21,
- NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
- NET_IPV6_PROXY_NDP=23,
- NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
- __NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
- NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
- NET_NEIGH_MCAST_SOLICIT=1,
- NET_NEIGH_UCAST_SOLICIT=2,
- NET_NEIGH_APP_SOLICIT=3,
- NET_NEIGH_RETRANS_TIME=4,
- NET_NEIGH_REACHABLE_TIME=5,
- NET_NEIGH_DELAY_PROBE_TIME=6,
- NET_NEIGH_GC_STALE_TIME=7,
- NET_NEIGH_UNRES_QLEN=8,
- NET_NEIGH_PROXY_QLEN=9,
- NET_NEIGH_ANYCAST_DELAY=10,
- NET_NEIGH_PROXY_DELAY=11,
- NET_NEIGH_LOCKTIME=12,
- NET_NEIGH_GC_INTERVAL=13,
- NET_NEIGH_GC_THRESH1=14,
- NET_NEIGH_GC_THRESH2=15,
- NET_NEIGH_GC_THRESH3=16,
- NET_NEIGH_RETRANS_TIME_MS=17,
- NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
- NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
- NET_IPX_PPROP_BROADCASTING=1,
- NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
- NET_LLC2=1,
- NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
- NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
- NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
- NET_LLC2_ACK_TIMEOUT=1,
- NET_LLC2_P_TIMEOUT=2,
- NET_LLC2_REJ_TIMEOUT=3,
- NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
- NET_ATALK_AARP_EXPIRY_TIME=1,
- NET_ATALK_AARP_TICK_TIME=2,
- NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
- NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
- NET_NETROM_DEFAULT_PATH_QUALITY=1,
- NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
- NET_NETROM_NETWORK_TTL_INITIALISER=3,
- NET_NETROM_TRANSPORT_TIMEOUT=4,
- NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
- NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
- NET_NETROM_TRANSPORT_BUSY_DELAY=7,
- NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
- NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
- NET_NETROM_ROUTING_CONTROL=10,
- NET_NETROM_LINK_FAILS_COUNT=11,
- NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
- NET_AX25_IP_DEFAULT_MODE=1,
- NET_AX25_DEFAULT_MODE=2,
- NET_AX25_BACKOFF_TYPE=3,
- NET_AX25_CONNECT_MODE=4,
- NET_AX25_STANDARD_WINDOW=5,
- NET_AX25_EXTENDED_WINDOW=6,
- NET_AX25_T1_TIMEOUT=7,
- NET_AX25_T2_TIMEOUT=8,
- NET_AX25_T3_TIMEOUT=9,
- NET_AX25_IDLE_TIMEOUT=10,
- NET_AX25_N2=11,
- NET_AX25_PACLEN=12,
- NET_AX25_PROTOCOL=13,
- NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
- NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
- NET_ROSE_CALL_REQUEST_TIMEOUT=2,
- NET_ROSE_RESET_REQUEST_TIMEOUT=3,
- NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
- NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
- NET_ROSE_ROUTING_CONTROL=6,
- NET_ROSE_LINK_FAIL_TIMEOUT=7,
- NET_ROSE_MAX_VCS=8,
- NET_ROSE_WINDOW_SIZE=9,
- NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
- NET_X25_RESTART_REQUEST_TIMEOUT=1,
- NET_X25_CALL_REQUEST_TIMEOUT=2,
- NET_X25_RESET_REQUEST_TIMEOUT=3,
- NET_X25_CLEAR_REQUEST_TIMEOUT=4,
- NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
- NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
- NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
- NET_DECNET_NODE_TYPE = 1,
- NET_DECNET_NODE_ADDRESS = 2,
- NET_DECNET_NODE_NAME = 3,
- NET_DECNET_DEFAULT_DEVICE = 4,
- NET_DECNET_TIME_WAIT = 5,
- NET_DECNET_DN_COUNT = 6,
- NET_DECNET_DI_COUNT = 7,
- NET_DECNET_DR_COUNT = 8,
- NET_DECNET_DST_GC_INTERVAL = 9,
- NET_DECNET_CONF = 10,
- NET_DECNET_NO_FC_MAX_CWND = 11,
- NET_DECNET_MEM = 12,
- NET_DECNET_RMEM = 13,
- NET_DECNET_WMEM = 14,
- NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
- NET_DECNET_CONF_LOOPBACK = -2,
- NET_DECNET_CONF_DDCMP = -3,
- NET_DECNET_CONF_PPP = -4,
- NET_DECNET_CONF_X25 = -5,
- NET_DECNET_CONF_GRE = -6,
- NET_DECNET_CONF_ETHER = -7
-
- /* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
- NET_DECNET_CONF_DEV_PRIORITY = 1,
- NET_DECNET_CONF_DEV_T1 = 2,
- NET_DECNET_CONF_DEV_T2 = 3,
- NET_DECNET_CONF_DEV_T3 = 4,
- NET_DECNET_CONF_DEV_FORWARDING = 5,
- NET_DECNET_CONF_DEV_BLKSIZE = 6,
- NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
- NET_SCTP_RTO_INITIAL = 1,
- NET_SCTP_RTO_MIN = 2,
- NET_SCTP_RTO_MAX = 3,
- NET_SCTP_RTO_ALPHA = 4,
- NET_SCTP_RTO_BETA = 5,
- NET_SCTP_VALID_COOKIE_LIFE = 6,
- NET_SCTP_ASSOCIATION_MAX_RETRANS = 7,
- NET_SCTP_PATH_MAX_RETRANS = 8,
- NET_SCTP_MAX_INIT_RETRANSMITS = 9,
- NET_SCTP_HB_INTERVAL = 10,
- NET_SCTP_PRESERVE_ENABLE = 11,
- NET_SCTP_MAX_BURST = 12,
- NET_SCTP_ADDIP_ENABLE = 13,
- NET_SCTP_PRSCTP_ENABLE = 14,
- NET_SCTP_SNDBUF_POLICY = 15,
- NET_SCTP_SACK_TIMEOUT = 16,
- NET_SCTP_RCVBUF_POLICY = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
- NET_BRIDGE_NF_CALL_ARPTABLES = 1,
- NET_BRIDGE_NF_CALL_IPTABLES = 2,
- NET_BRIDGE_NF_CALL_IP6TABLES = 3,
- NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
- NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
- NET_IRDA_DISCOVERY=1,
- NET_IRDA_DEVNAME=2,
- NET_IRDA_DEBUG=3,
- NET_IRDA_FAST_POLL=4,
- NET_IRDA_DISCOVERY_SLOTS=5,
- NET_IRDA_DISCOVERY_TIMEOUT=6,
- NET_IRDA_SLOT_TIMEOUT=7,
- NET_IRDA_MAX_BAUD_RATE=8,
- NET_IRDA_MIN_TX_TURN_TIME=9,
- NET_IRDA_MAX_TX_DATA_SIZE=10,
- NET_IRDA_MAX_TX_WINDOW=11,
- NET_IRDA_MAX_NOREPLY_TIME=12,
- NET_IRDA_WARN_NOREPLY_TIME=13,
- NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
- FS_NRINODE=1, /* int:current number of allocated inodes */
- FS_STATINODE=2,
- FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */
- FS_NRDQUOT=4, /* int:current number of allocated dquots */
- FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */
- FS_NRFILE=6, /* int:current number of allocated filedescriptors */
- FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */
- FS_DENTRY=8,
- FS_NRSUPER=9, /* int:current number of allocated super_blocks */
- FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */
- FS_OVERFLOWUID=11, /* int: overflow UID */
- FS_OVERFLOWGID=12, /* int: overflow GID */
- FS_LEASES=13, /* int: leases enabled */
- FS_DIR_NOTIFY=14, /* int: directory notification enabled */
- FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */
- FS_DQSTATS=16, /* disc quota usage statistics and control */
- FS_XFS=17, /* struct: control xfs parameters */
- FS_AIO_NR=18, /* current system-wide number of aio requests */
- FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */
- FS_INOTIFY=20, /* inotify submenu */
- FS_OCFS2=988, /* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
- FS_DQ_LOOKUPS = 1,
- FS_DQ_DROPS = 2,
- FS_DQ_READS = 3,
- FS_DQ_WRITES = 4,
- FS_DQ_CACHE_HITS = 5,
- FS_DQ_ALLOCATED = 6,
- FS_DQ_FREE = 7,
- FS_DQ_SYNCS = 8,
- FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
- DEV_CDROM=1,
- DEV_HWMON=2,
- DEV_PARPORT=3,
- DEV_RAID=4,
- DEV_MAC_HID=5,
- DEV_SCSI=6,
- DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
- DEV_CDROM_INFO=1,
- DEV_CDROM_AUTOCLOSE=2,
- DEV_CDROM_AUTOEJECT=3,
- DEV_CDROM_DEBUG=4,
- DEV_CDROM_LOCK=5,
- DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
- DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
- DEV_RAID_SPEED_LIMIT_MIN=1,
- DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
- DEV_PARPORT_DEFAULT_TIMESLICE=1,
- DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
- DEV_PARPORT_SPINTIME=1,
- DEV_PARPORT_BASE_ADDR=2,
- DEV_PARPORT_IRQ=3,
- DEV_PARPORT_DMA=4,
- DEV_PARPORT_MODES=5,
- DEV_PARPORT_DEVICES=6,
- DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
- DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
- DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
- DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
- DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
- DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
- DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
- DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
- DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
- DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
- DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
- ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */
- ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */
- ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
- ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
- ABI_TRACE=5, /* tracing flags */
- ABI_FAKE_UTSNAME=6, /* fake target utsname information */
-};
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/rcupdate.h>
#include <linux/wait.h>
#include <linux/rbtree.h>
+#include <uapi/linux/sysctl.h>
/* For the /proc/sys support */
struct ctl_table;
@@ -1122,6 +215,4 @@ static inline void setup_sysctl_set(struct ctl_table_set *p,
#endif /* CONFIG_SYSCTL */
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h
deleted file mode 100644
index 934335a..0000000
--- a/include/linux/sysinfo.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _LINUX_SYSINFO_H
-#define _LINUX_SYSINFO_H
-
-#include <linux/types.h>
-
-#define SI_LOAD_SHIFT 16
-struct sysinfo {
- __kernel_long_t uptime; /* Seconds since boot */
- __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */
- __kernel_ulong_t totalram; /* Total usable main memory size */
- __kernel_ulong_t freeram; /* Available memory size */
- __kernel_ulong_t sharedram; /* Amount of shared memory */
- __kernel_ulong_t bufferram; /* Memory used by buffers */
- __kernel_ulong_t totalswap; /* Total swap space size */
- __kernel_ulong_t freeswap; /* swap space still available */
- __u16 procs; /* Number of current processes */
- __u16 pad; /* Explicit padding for m68k */
- __kernel_ulong_t totalhigh; /* Total high memory size */
- __kernel_ulong_t freehigh; /* Available high memory size */
- __u32 mem_unit; /* Memory unit size in bytes */
- char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */
-};
-
-#endif /* _LINUX_SYSINFO_H */
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
deleted file mode 100644
index 2466e55..0000000
--- a/include/linux/taskstats.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* taskstats.h - exporting per-task statistics
- *
- * Copyright (C) Shailabh Nagar, IBM Corp. 2006
- * (C) Balbir Singh, IBM Corp. 2006
- * (C) Jay Lan, SGI, 2006
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_TASKSTATS_H
-#define _LINUX_TASKSTATS_H
-
-#include <linux/types.h>
-
-/* Format for per-task data returned to userland when
- * - a task exits
- * - listener requests stats for a task
- *
- * The struct is versioned. Newer versions should only add fields to
- * the bottom of the struct to maintain backward compatibility.
- *
- *
- * To add new fields
- * a) bump up TASKSTATS_VERSION
- * b) add comment indicating new version number at end of struct
- * c) add new fields after version comment; maintain 64-bit alignment
- */
-
-
-#define TASKSTATS_VERSION 8
-#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
- * in linux/sched.h */
-
-struct taskstats {
-
- /* The version number of this struct. This field is always set to
- * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
- * Each time the struct is changed, the value should be incremented.
- */
- __u16 version;
- __u32 ac_exitcode; /* Exit status */
-
- /* The accounting flags of a task as defined in <linux/acct.h>
- * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
- */
- __u8 ac_flag; /* Record flags */
- __u8 ac_nice; /* task_nice */
-
- /* Delay accounting fields start
- *
- * All values, until comment "Delay accounting fields end" are
- * available only if delay accounting is enabled, even though the last
- * few fields are not delays
- *
- * xxx_count is the number of delay values recorded
- * xxx_delay_total is the corresponding cumulative delay in nanoseconds
- *
- * xxx_delay_total wraps around to zero on overflow
- * xxx_count incremented regardless of overflow
- */
-
- /* Delay waiting for cpu, while runnable
- * count, delay_total NOT updated atomically
- */
- __u64 cpu_count __attribute__((aligned(8)));
- __u64 cpu_delay_total;
-
- /* Following four fields atomically updated using task->delays->lock */
-
- /* Delay waiting for synchronous block I/O to complete
- * does not account for delays in I/O submission
- */
- __u64 blkio_count;
- __u64 blkio_delay_total;
-
- /* Delay waiting for page fault I/O (swap in only) */
- __u64 swapin_count;
- __u64 swapin_delay_total;
-
- /* cpu "wall-clock" running time
- * On some architectures, value will adjust for cpu time stolen
- * from the kernel in involuntary waits due to virtualization.
- * Value is cumulative, in nanoseconds, without a corresponding count
- * and wraps around to zero silently on overflow
- */
- __u64 cpu_run_real_total;
-
- /* cpu "virtual" running time
- * Uses time intervals seen by the kernel i.e. no adjustment
- * for kernel's involuntary waits due to virtualization.
- * Value is cumulative, in nanoseconds, without a corresponding count
- * and wraps around to zero silently on overflow
- */
- __u64 cpu_run_virtual_total;
- /* Delay accounting fields end */
- /* version 1 ends here */
-
- /* Basic Accounting Fields start */
- char ac_comm[TS_COMM_LEN]; /* Command name */
- __u8 ac_sched __attribute__((aligned(8)));
- /* Scheduling discipline */
- __u8 ac_pad[3];
- __u32 ac_uid __attribute__((aligned(8)));
- /* User ID */
- __u32 ac_gid; /* Group ID */
- __u32 ac_pid; /* Process ID */
- __u32 ac_ppid; /* Parent process ID */
- __u32 ac_btime; /* Begin time [sec since 1970] */
- __u64 ac_etime __attribute__((aligned(8)));
- /* Elapsed time [usec] */
- __u64 ac_utime; /* User CPU time [usec] */
- __u64 ac_stime; /* SYstem CPU time [usec] */
- __u64 ac_minflt; /* Minor Page Fault Count */
- __u64 ac_majflt; /* Major Page Fault Count */
- /* Basic Accounting Fields end */
-
- /* Extended accounting fields start */
- /* Accumulated RSS usage in duration of a task, in MBytes-usecs.
- * The current rss usage is added to this counter every time
- * a tick is charged to a task's system time. So, at the end we
- * will have memory usage multiplied by system time. Thus an
- * average usage per system time unit can be calculated.
- */
- __u64 coremem; /* accumulated RSS usage in MB-usec */
- /* Accumulated virtual memory usage in duration of a task.
- * Same as acct_rss_mem1 above except that we keep track of VM usage.
- */
- __u64 virtmem; /* accumulated VM usage in MB-usec */
-
- /* High watermark of RSS and virtual memory usage in duration of
- * a task, in KBytes.
- */
- __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */
- __u64 hiwater_vm; /* High-water VM usage, in KB */
-
- /* The following four fields are I/O statistics of a task. */
- __u64 read_char; /* bytes read */
- __u64 write_char; /* bytes written */
- __u64 read_syscalls; /* read syscalls */
- __u64 write_syscalls; /* write syscalls */
- /* Extended accounting fields end */
-
-#define TASKSTATS_HAS_IO_ACCOUNTING
- /* Per-task storage I/O accounting starts */
- __u64 read_bytes; /* bytes of read I/O */
- __u64 write_bytes; /* bytes of write I/O */
- __u64 cancelled_write_bytes; /* bytes of cancelled write I/O */
-
- __u64 nvcsw; /* voluntary_ctxt_switches */
- __u64 nivcsw; /* nonvoluntary_ctxt_switches */
-
- /* time accounting for SMT machines */
- __u64 ac_utimescaled; /* utime scaled on frequency etc */
- __u64 ac_stimescaled; /* stime scaled on frequency etc */
- __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
-
- /* Delay waiting for memory reclaim */
- __u64 freepages_count;
- __u64 freepages_delay_total;
-};
-
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __TASKSTATS_CMD_MAX
- */
-
-enum {
- TASKSTATS_CMD_UNSPEC = 0, /* Reserved */
- TASKSTATS_CMD_GET, /* user->kernel request/get-response */
- TASKSTATS_CMD_NEW, /* kernel->user event */
- __TASKSTATS_CMD_MAX,
-};
-
-#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
-
-enum {
- TASKSTATS_TYPE_UNSPEC = 0, /* Reserved */
- TASKSTATS_TYPE_PID, /* Process id */
- TASKSTATS_TYPE_TGID, /* Thread group id */
- TASKSTATS_TYPE_STATS, /* taskstats structure */
- TASKSTATS_TYPE_AGGR_PID, /* contains pid + stats */
- TASKSTATS_TYPE_AGGR_TGID, /* contains tgid + stats */
- TASKSTATS_TYPE_NULL, /* contains nothing */
- __TASKSTATS_TYPE_MAX,
-};
-
-#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
-
-enum {
- TASKSTATS_CMD_ATTR_UNSPEC = 0,
- TASKSTATS_CMD_ATTR_PID,
- TASKSTATS_CMD_ATTR_TGID,
- TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
- TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
- __TASKSTATS_CMD_ATTR_MAX,
-};
-
-#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
-
-/* NETLINK_GENERIC related info */
-
-#define TASKSTATS_GENL_NAME "TASKSTATS"
-#define TASKSTATS_GENL_VERSION 0x1
-
-#endif /* _LINUX_TASKSTATS_H */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 67c789a..8a7fc4b 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -17,217 +17,13 @@
#ifndef _LINUX_TCP_H
#define _LINUX_TCP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
- __be16 source;
- __be16 dest;
- __be32 seq;
- __be32 ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u16 res1:4,
- doff:4,
- fin:1,
- syn:1,
- rst:1,
- psh:1,
- ack:1,
- urg:1,
- ece:1,
- cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u16 doff:4,
- res1:4,
- cwr:1,
- ece:1,
- urg:1,
- ack:1,
- psh:1,
- rst:1,
- syn:1,
- fin:1;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
-};
-
-/*
- * The union cast uses a gcc extension to avoid aliasing problems
- * (union is compatible to any of its members)
- * This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
-};
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
-enum {
- TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
- TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
- TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
- TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
- TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
- TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
- TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
- TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
- TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
- TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-};
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG 2 /* Limit MSS */
-#define TCP_CORK 3 /* Never send partially complete segments */
-#define TCP_KEEPIDLE 4 /* Start keeplives after this period */
-#define TCP_KEEPINTVL 5 /* Interval between keepalives */
-#define TCP_KEEPCNT 6 /* Number of keepalives before death */
-#define TCP_SYNCNT 7 /* Number of SYN retransmits */
-#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */
-#define TCP_INFO 11 /* Information about this connection. */
-#define TCP_QUICKACK 12 /* Block/reenable quick acks */
-#define TCP_CONGESTION 13 /* Congestion control algorithm */
-#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */
-#define TCP_REPAIR 19 /* TCP sock is under repair right now */
-#define TCP_REPAIR_QUEUE 20
-#define TCP_QUEUE_SEQ 21
-#define TCP_REPAIR_OPTIONS 22
-#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */
-
-struct tcp_repair_opt {
- __u32 opt_code;
- __u32 opt_val;
-};
-
-enum {
- TCP_NO_QUEUE,
- TCP_RECV_QUEUE,
- TCP_SEND_QUEUE,
- TCP_QUEUES_NR,
-};
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS 1
-#define TCPI_OPT_SACK 2
-#define TCPI_OPT_WSCALE 4
-#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
- TCP_CA_Open = 0,
-#define TCPF_CA_Open (1<<TCP_CA_Open)
- TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
- TCP_CA_CWR = 2,
-#define TCPF_CA_CWR (1<<TCP_CA_CWR)
- TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
- TCP_CA_Loss = 4
-#define TCPF_CA_Loss (1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
- __u8 tcpi_state;
- __u8 tcpi_ca_state;
- __u8 tcpi_retransmits;
- __u8 tcpi_probes;
- __u8 tcpi_backoff;
- __u8 tcpi_options;
- __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
- __u32 tcpi_rto;
- __u32 tcpi_ato;
- __u32 tcpi_snd_mss;
- __u32 tcpi_rcv_mss;
-
- __u32 tcpi_unacked;
- __u32 tcpi_sacked;
- __u32 tcpi_lost;
- __u32 tcpi_retrans;
- __u32 tcpi_fackets;
-
- /* Times. */
- __u32 tcpi_last_data_sent;
- __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */
- __u32 tcpi_last_data_recv;
- __u32 tcpi_last_ack_recv;
-
- /* Metrics. */
- __u32 tcpi_pmtu;
- __u32 tcpi_rcv_ssthresh;
- __u32 tcpi_rtt;
- __u32 tcpi_rttvar;
- __u32 tcpi_snd_ssthresh;
- __u32 tcpi_snd_cwnd;
- __u32 tcpi_advmss;
- __u32 tcpi_reordering;
-
- __u32 tcpi_rcv_rtt;
- __u32 tcpi_rcv_space;
-
- __u32 tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN 80
-
-struct tcp_md5sig {
- struct __kernel_sockaddr_storage tcpm_addr; /* address associated */
- __u16 __tcpm_pad1; /* zero */
- __u16 tcpm_keylen; /* key length */
- __u32 __tcpm_pad2; /* zero */
- __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN 8 /* 64-bits */
-#define TCP_COOKIE_MAX 16 /* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
- * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN (1 << 2) /* Was data received? */
-#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
- __u16 tcpct_flags; /* see above */
- __u8 __tcpct_pad1; /* zero */
- __u8 tcpct_cookie_desired; /* bytes */
- __u16 tcpct_s_data_desired; /* bytes of variable data */
- __u16 tcpct_used; /* bytes in value */
- __u8 tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
#include <linux/dmaengine.h>
#include <net/sock.h>
#include <net/inet_connection_sock.h>
#include <net/inet_timewait_sock.h>
+#include <uapi/linux/tcp.h>
static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
{
@@ -595,6 +391,4 @@ static inline int fastopen_init_queue(struct sock *sk, int backlog)
return 0;
}
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_TCP_H */
diff --git a/include/linux/tcp_metrics.h b/include/linux/tcp_metrics.h
deleted file mode 100644
index cb5157b..0000000
--- a/include/linux/tcp_metrics.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* tcp_metrics.h - TCP Metrics Interface */
-
-#ifndef _LINUX_TCP_METRICS_H
-#define _LINUX_TCP_METRICS_H
-
-#include <linux/types.h>
-
-/* NETLINK_GENERIC related info
- */
-#define TCP_METRICS_GENL_NAME "tcp_metrics"
-#define TCP_METRICS_GENL_VERSION 0x1
-
-enum tcp_metric_index {
- TCP_METRIC_RTT,
- TCP_METRIC_RTTVAR,
- TCP_METRIC_SSTHRESH,
- TCP_METRIC_CWND,
- TCP_METRIC_REORDERING,
-
- /* Always last. */
- __TCP_METRIC_MAX,
-};
-
-#define TCP_METRIC_MAX (__TCP_METRIC_MAX - 1)
-
-enum {
- TCP_METRICS_ATTR_UNSPEC,
- TCP_METRICS_ATTR_ADDR_IPV4, /* u32 */
- TCP_METRICS_ATTR_ADDR_IPV6, /* binary */
- TCP_METRICS_ATTR_AGE, /* msecs */
- TCP_METRICS_ATTR_TW_TSVAL, /* u32, raw, rcv tsval */
- TCP_METRICS_ATTR_TW_TS_STAMP, /* s32, sec age */
- TCP_METRICS_ATTR_VALS, /* nested +1, u32 */
- TCP_METRICS_ATTR_FOPEN_MSS, /* u16 */
- TCP_METRICS_ATTR_FOPEN_SYN_DROPS, /* u16, count of drops */
- TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS, /* msecs age */
- TCP_METRICS_ATTR_FOPEN_COOKIE, /* binary */
-
- __TCP_METRICS_ATTR_MAX,
-};
-
-#define TCP_METRICS_ATTR_MAX (__TCP_METRICS_ATTR_MAX - 1)
-
-enum {
- TCP_METRICS_CMD_UNSPEC,
- TCP_METRICS_CMD_GET,
- TCP_METRICS_CMD_DEL,
-
- __TCP_METRICS_CMD_MAX,
-};
-
-#define TCP_METRICS_CMD_MAX (__TCP_METRICS_CMD_MAX - 1)
-
-#endif /* _LINUX_TCP_METRICS_H */
diff --git a/include/linux/telephony.h b/include/linux/telephony.h
deleted file mode 100644
index f63afe3..0000000
--- a/include/linux/telephony.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/******************************************************************************
- *
- * telephony.h
- *
- * Basic Linux Telephony Interface
- *
- * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Authors: Ed Okerson, <eokerson@quicknet.net>
- * Greg Herlein, <gherlein@quicknet.net>
- *
- * Contributors: Alan Cox, <alan@lxorguk.ukuu.org.uk>
- * David W. Erhart, <derhart@quicknet.net>
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#ifndef TELEPHONY_H
-#define TELEPHONY_H
-
-#define TELEPHONY_VERSION 3013
-
-#define PHONE_VENDOR_IXJ 1
-#define PHONE_VENDOR_QUICKNET PHONE_VENDOR_IXJ
-#define PHONE_VENDOR_VOICETRONIX 2
-#define PHONE_VENDOR_ACULAB 3
-#define PHONE_VENDOR_DIGI 4
-#define PHONE_VENDOR_FRANKLIN 5
-
-/******************************************************************************
- * Vendor Summary Information Area
- *
- * Quicknet Technologies, Inc. - makes low density analog telephony cards
- * with audio compression, POTS and PSTN interfaces (www.quicknet.net)
- *
- * (other vendors following this API shuld add a short description of
- * the telephony products they support under Linux)
- *
- *****************************************************************************/
-#define QTI_PHONEJACK 100
-#define QTI_LINEJACK 300
-#define QTI_PHONEJACK_LITE 400
-#define QTI_PHONEJACK_PCI 500
-#define QTI_PHONECARD 600
-
-/******************************************************************************
-*
-* The capabilities ioctls can inform you of the capabilities of each phone
-* device installed in your system. The PHONECTL_CAPABILITIES ioctl
-* returns an integer value indicating the number of capabilities the
-* device has. The PHONECTL_CAPABILITIES_LIST will fill an array of
-* capability structs with all of its capabilities. The
-* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
-* a TRUE if the device has that capability, otherwise it returns false.
-*
-******************************************************************************/
-typedef enum {
- vendor = 0,
- device,
- port,
- codec,
- dsp
-} phone_cap;
-
-struct phone_capability {
- char desc[80];
- phone_cap captype;
- int cap;
- int handle;
-};
-
-typedef enum {
- pots = 0,
- pstn,
- handset,
- speaker
-} phone_ports;
-
-#define PHONE_CAPABILITIES _IO ('q', 0x80)
-#define PHONE_CAPABILITIES_LIST _IOR ('q', 0x81, struct phone_capability *)
-#define PHONE_CAPABILITIES_CHECK _IOW ('q', 0x82, struct phone_capability *)
-
-typedef struct {
- char month[3];
- char day[3];
- char hour[3];
- char min[3];
- int numlen;
- char number[11];
- int namelen;
- char name[80];
-} PHONE_CID;
-
-#define PHONE_RING _IO ('q', 0x83)
-#define PHONE_HOOKSTATE _IO ('q', 0x84)
-#define PHONE_MAXRINGS _IOW ('q', 0x85, char)
-#define PHONE_RING_CADENCE _IOW ('q', 0x86, short)
-#define OLD_PHONE_RING_START _IO ('q', 0x87)
-#define PHONE_RING_START _IOW ('q', 0x87, PHONE_CID *)
-#define PHONE_RING_STOP _IO ('q', 0x88)
-
-#define USA_RING_CADENCE 0xC0C0
-
-#define PHONE_REC_CODEC _IOW ('q', 0x89, int)
-#define PHONE_REC_START _IO ('q', 0x8A)
-#define PHONE_REC_STOP _IO ('q', 0x8B)
-#define PHONE_REC_DEPTH _IOW ('q', 0x8C, int)
-#define PHONE_FRAME _IOW ('q', 0x8D, int)
-#define PHONE_REC_VOLUME _IOW ('q', 0x8E, int)
-#define PHONE_REC_VOLUME_LINEAR _IOW ('q', 0xDB, int)
-#define PHONE_REC_LEVEL _IO ('q', 0x8F)
-
-#define PHONE_PLAY_CODEC _IOW ('q', 0x90, int)
-#define PHONE_PLAY_START _IO ('q', 0x91)
-#define PHONE_PLAY_STOP _IO ('q', 0x92)
-#define PHONE_PLAY_DEPTH _IOW ('q', 0x93, int)
-#define PHONE_PLAY_VOLUME _IOW ('q', 0x94, int)
-#define PHONE_PLAY_VOLUME_LINEAR _IOW ('q', 0xDC, int)
-#define PHONE_PLAY_LEVEL _IO ('q', 0x95)
-#define PHONE_DTMF_READY _IOR ('q', 0x96, int)
-#define PHONE_GET_DTMF _IOR ('q', 0x97, int)
-#define PHONE_GET_DTMF_ASCII _IOR ('q', 0x98, int)
-#define PHONE_DTMF_OOB _IOW ('q', 0x99, int)
-#define PHONE_EXCEPTION _IOR ('q', 0x9A, int)
-#define PHONE_PLAY_TONE _IOW ('q', 0x9B, char)
-#define PHONE_SET_TONE_ON_TIME _IOW ('q', 0x9C, int)
-#define PHONE_SET_TONE_OFF_TIME _IOW ('q', 0x9D, int)
-#define PHONE_GET_TONE_ON_TIME _IO ('q', 0x9E)
-#define PHONE_GET_TONE_OFF_TIME _IO ('q', 0x9F)
-#define PHONE_GET_TONE_STATE _IO ('q', 0xA0)
-#define PHONE_BUSY _IO ('q', 0xA1)
-#define PHONE_RINGBACK _IO ('q', 0xA2)
-#define PHONE_DIALTONE _IO ('q', 0xA3)
-#define PHONE_CPT_STOP _IO ('q', 0xA4)
-
-#define PHONE_PSTN_SET_STATE _IOW ('q', 0xA4, int)
-#define PHONE_PSTN_GET_STATE _IO ('q', 0xA5)
-
-#define PSTN_ON_HOOK 0
-#define PSTN_RINGING 1
-#define PSTN_OFF_HOOK 2
-#define PSTN_PULSE_DIAL 3
-
-/******************************************************************************
-*
-* The wink duration is tunable with this ioctl. The default wink duration
-* is 320ms. You do not need to use this ioctl if you do not require a
-* different wink duration.
-*
-******************************************************************************/
-#define PHONE_WINK_DURATION _IOW ('q', 0xA6, int)
-#define PHONE_WINK _IOW ('q', 0xAA, int)
-
-/******************************************************************************
-*
-* Codec Definitions
-*
-******************************************************************************/
-typedef enum {
- G723_63 = 1,
- G723_53 = 2,
- TS85 = 3,
- TS48 = 4,
- TS41 = 5,
- G728 = 6,
- G729 = 7,
- ULAW = 8,
- ALAW = 9,
- LINEAR16 = 10,
- LINEAR8 = 11,
- WSS = 12,
- G729B = 13
-} phone_codec;
-
-struct phone_codec_data
-{
- phone_codec type;
- unsigned short buf_min, buf_opt, buf_max;
-};
-
-#define PHONE_QUERY_CODEC _IOWR ('q', 0xA7, struct phone_codec_data *)
-#define PHONE_PSTN_LINETEST _IO ('q', 0xA8)
-
-/******************************************************************************
-*
-* This controls the VAD/CNG functionality of G.723.1. The driver will
-* always pass full size frames, any unused bytes will be padded with zeros,
-* and frames passed to the driver should also be padded with zeros. The
-* frame type is encoded in the least significant two bits of the first
-* WORD of the frame as follows:
-*
-* bits 1-0 Frame Type Data Rate Significant Words
-* 00 0 G.723.1 6.3 12
-* 01 1 G.723.1 5.3 10
-* 10 2 VAD/CNG 2
-* 11 3 Repeat last CNG 2 bits
-*
-******************************************************************************/
-#define PHONE_VAD _IOW ('q', 0xA9, int)
-
-
-/******************************************************************************
-*
-* The exception structure allows us to multiplex multiple events onto the
-* select() exception set. If any of these flags are set select() will
-* return with a positive indication on the exception set. The dtmf_ready
-* bit indicates if there is data waiting in the DTMF buffer. The
-* hookstate bit is set if there is a change in hookstate status, it does not
-* indicate the current state of the hookswitch. The pstn_ring bit
-* indicates that the DAA on a LineJACK card has detected ring voltage on
-* the PSTN port. The caller_id bit indicates that caller_id data has been
-* received and is available. The pstn_wink bit indicates that the DAA on
-* the LineJACK has received a wink from the telco switch. The f0, f1, f2
-* and f3 bits indicate that the filter has been triggered by detecting the
-* frequency programmed into that filter.
-*
-* The remaining bits should be set to zero. They will become defined over time
-* for other interface cards and their needs.
-*
-******************************************************************************/
-struct phone_except
-{
- unsigned int dtmf_ready:1;
- unsigned int hookstate:1;
- unsigned int pstn_ring:1;
- unsigned int caller_id:1;
- unsigned int pstn_wink:1;
- unsigned int f0:1;
- unsigned int f1:1;
- unsigned int f2:1;
- unsigned int f3:1;
- unsigned int flash:1;
- unsigned int fc0:1;
- unsigned int fc1:1;
- unsigned int fc2:1;
- unsigned int fc3:1;
- unsigned int reserved:18;
-};
-
-union telephony_exception {
- struct phone_except bits;
- unsigned int bytes;
-};
-
-
-#endif /* TELEPHONY_H */
-
diff --git a/include/linux/termios.h b/include/linux/termios.h
deleted file mode 100644
index 2acd0c1..0000000
--- a/include/linux/termios.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_TERMIOS_H
-#define _LINUX_TERMIOS_H
-
-#include <linux/types.h>
-#include <asm/termios.h>
-
-#define NFF 5
-
-struct termiox
-{
- __u16 x_hflag;
- __u16 x_cflag;
- __u16 x_rflag[NFF];
- __u16 x_sflag;
-};
-
-#define RTSXOFF 0x0001 /* RTS flow control on input */
-#define CTSXON 0x0002 /* CTS flow control on output */
-#define DTRXOFF 0x0004 /* DTR flow control on input */
-#define DSRXON 0x0008 /* DCD flow control on output */
-
-#endif
diff --git a/include/linux/time.h b/include/linux/time.h
index b51e664..4d358e9 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -1,33 +1,10 @@
#ifndef _LINUX_TIME_H
#define _LINUX_TIME_H
-#include <linux/types.h>
-
-#ifdef __KERNEL__
# include <linux/cache.h>
# include <linux/seqlock.h>
# include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
- __kernel_time_t tv_sec; /* seconds */
- long tv_nsec; /* nanoseconds */
-};
-#endif
-
-struct timeval {
- __kernel_time_t tv_sec; /* seconds */
- __kernel_suseconds_t tv_usec; /* microseconds */
-};
-
-struct timezone {
- int tz_minuteswest; /* minutes west of Greenwich */
- int tz_dsttime; /* type of dst correction */
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/time.h>
extern struct timezone sys_tz;
@@ -280,51 +257,4 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
a->tv_nsec = ns;
}
-#endif /* __KERNEL__ */
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define ITIMER_REAL 0
-#define ITIMER_VIRTUAL 1
-#define ITIMER_PROF 2
-
-struct itimerspec {
- struct timespec it_interval; /* timer period */
- struct timespec it_value; /* timer expiration */
-};
-
-struct itimerval {
- struct timeval it_interval; /* timer interval */
- struct timeval it_value; /* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME 0
-#define CLOCK_MONOTONIC 1
-#define CLOCK_PROCESS_CPUTIME_ID 2
-#define CLOCK_THREAD_CPUTIME_ID 3
-#define CLOCK_MONOTONIC_RAW 4
-#define CLOCK_REALTIME_COARSE 5
-#define CLOCK_MONOTONIC_COARSE 6
-#define CLOCK_BOOTTIME 7
-#define CLOCK_REALTIME_ALARM 8
-#define CLOCK_BOOTTIME_ALARM 9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE 10
-#define MAX_CLOCKS 16
-#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME 0x01
-
#endif
diff --git a/include/linux/times.h b/include/linux/times.h
deleted file mode 100644
index 87b6261..0000000
--- a/include/linux/times.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_TIMES_H
-#define _LINUX_TIMES_H
-
-#include <linux/types.h>
-
-struct tms {
- __kernel_clock_t tms_utime;
- __kernel_clock_t tms_stime;
- __kernel_clock_t tms_cutime;
- __kernel_clock_t tms_cstime;
-};
-
-#endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb2..5ec87c6 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
-#define NTP_API 4 /* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
- unsigned int modes; /* mode selector */
- long offset; /* time offset (usec) */
- long freq; /* frequency offset (scaled ppm) */
- long maxerror; /* maximum error (usec) */
- long esterror; /* estimated error (usec) */
- int status; /* clock command/status */
- long constant; /* pll time constant */
- long precision; /* clock precision (usec) (read only) */
- long tolerance; /* clock frequency tolerance (ppm)
- * (read only)
- */
- struct timeval time; /* (read only, except for ADJ_SETOFFSET) */
- long tick; /* (modified) usecs between clock ticks */
-
- long ppsfreq; /* pps frequency (scaled ppm) (ro) */
- long jitter; /* pps jitter (us) (ro) */
- int shift; /* interval duration (s) (shift) (ro) */
- long stabil; /* pps stability (scaled ppm) (ro) */
- long jitcnt; /* jitter limit exceeded (ro) */
- long calcnt; /* calibration intervals (ro) */
- long errcnt; /* calibration errors (ro) */
- long stbcnt; /* stability limit exceeded (ro) */
-
- int tai; /* TAI offset (ro) */
-
- int :32; int :32; int :32; int :32;
- int :32; int :32; int :32; int :32;
- int :32; int :32; int :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET 0x0001 /* time offset */
-#define ADJ_FREQUENCY 0x0002 /* frequency offset */
-#define ADJ_MAXERROR 0x0004 /* maximum time error */
-#define ADJ_ESTERROR 0x0008 /* estimated time error */
-#define ADJ_STATUS 0x0010 /* clock status */
-#define ADJ_TIMECONST 0x0020 /* pll time constant */
-#define ADJ_TAI 0x0080 /* set TAI offset */
-#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */
-#define ADJ_MICRO 0x1000 /* select microsecond resolution */
-#define ADJ_NANO 0x2000 /* select nanosecond resolution */
-#define ADJ_TICK 0x4000 /* tick value */
-
-#ifdef __KERNEL__
#define ADJ_ADJTIME 0x8000 /* switch between adjtime/adjtimex modes */
#define ADJ_OFFSET_SINGLESHOT 0x0001 /* old-fashioned adjtime */
#define ADJ_OFFSET_READONLY 0x2000 /* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET ADJ_OFFSET
-#define MOD_FREQUENCY ADJ_FREQUENCY
-#define MOD_MAXERROR ADJ_MAXERROR
-#define MOD_ESTERROR ADJ_ESTERROR
-#define MOD_STATUS ADJ_STATUS
-#define MOD_TIMECONST ADJ_TIMECONST
-#define MOD_TAI ADJ_TAI
-#define MOD_MICRO ADJ_MICRO
-#define MOD_NANO ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL 0x0001 /* enable PLL updates (rw) */
-#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */
-#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */
-#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */
-
-#define STA_INS 0x0010 /* insert leap (rw) */
-#define STA_DEL 0x0020 /* delete leap (rw) */
-#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */
-#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */
-
-#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */
-#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
-#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
- STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK 0 /* clock synchronized, no leap second */
-#define TIME_INS 1 /* insert leap second */
-#define TIME_DEL 2 /* delete leap second */
-#define TIME_OOP 3 /* leap second in progress */
-#define TIME_WAIT 4 /* leap second has occurred */
-#define TIME_ERROR 5 /* clock not synchronized */
-#define TIME_BAD TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/param.h>
@@ -261,6 +152,4 @@ int read_current_timer(unsigned long *timer_val);
/* The clock frequency of the i8253/i8254 PIT */
#define PIT_TICK_RATE 1193182ul
-#endif /* KERNEL */
-
#endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
deleted file mode 100644
index 4756862..0000000
--- a/include/linux/tiocl.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _LINUX_TIOCL_H
-#define _LINUX_TIOCL_H
-
-#define TIOCL_SETSEL 2 /* set a selection */
-#define TIOCL_SELCHAR 0 /* select characters */
-#define TIOCL_SELWORD 1 /* select whole words */
-#define TIOCL_SELLINE 2 /* select whole lines */
-#define TIOCL_SELPOINTER 3 /* show the pointer */
-#define TIOCL_SELCLEAR 4 /* clear visibility of selection */
-#define TIOCL_SELMOUSEREPORT 16 /* report beginning of selection */
-#define TIOCL_SELBUTTONMASK 15 /* button mask for report */
-/* selection extent */
-struct tiocl_selection {
- unsigned short xs; /* X start */
- unsigned short ys; /* Y start */
- unsigned short xe; /* X end */
- unsigned short ye; /* Y end */
- unsigned short sel_mode; /* selection mode */
-};
-
-#define TIOCL_PASTESEL 3 /* paste previous selection */
-#define TIOCL_UNBLANKSCREEN 4 /* unblank screen */
-
-#define TIOCL_SELLOADLUT 5
- /* set characters to be considered alphabetic when selecting */
- /* u32[8] bit array, 4 bytes-aligned with type */
-
-/* these two don't return a value: they write it back in the type */
-#define TIOCL_GETSHIFTSTATE 6 /* write shift state */
-#define TIOCL_GETMOUSEREPORTING 7 /* write whether mouse event are reported */
-#define TIOCL_SETVESABLANK 10 /* set vesa blanking mode */
-#define TIOCL_SETKMSGREDIRECT 11 /* restrict kernel messages to a vt */
-#define TIOCL_GETFGCONSOLE 12 /* get foreground vt */
-#define TIOCL_SCROLLCONSOLE 13 /* scroll console */
-#define TIOCL_BLANKSCREEN 14 /* keep screen blank even if a key is pressed */
-#define TIOCL_BLANKEDSCREEN 15 /* return which vt was blanked */
-#define TIOCL_GETKMSGREDIRECT 17 /* get the vt the kernel messages are restricted to */
-
-#endif /* _LINUX_TIOCL_H */
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
deleted file mode 100644
index f2d9009..0000000
--- a/include/linux/tipc.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * include/linux/tipc.h: Include file for TIPC socket interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_H_
-#define _LINUX_TIPC_H_
-
-#include <linux/types.h>
-
-/*
- * TIPC addressing primitives
- */
-
-struct tipc_portid {
- __u32 ref;
- __u32 node;
-};
-
-struct tipc_name {
- __u32 type;
- __u32 instance;
-};
-
-struct tipc_name_seq {
- __u32 type;
- __u32 lower;
- __u32 upper;
-};
-
-static inline __u32 tipc_addr(unsigned int zone,
- unsigned int cluster,
- unsigned int node)
-{
- return (zone << 24) | (cluster << 12) | node;
-}
-
-static inline unsigned int tipc_zone(__u32 addr)
-{
- return addr >> 24;
-}
-
-static inline unsigned int tipc_cluster(__u32 addr)
-{
- return (addr >> 12) & 0xfff;
-}
-
-static inline unsigned int tipc_node(__u32 addr)
-{
- return addr & 0xfff;
-}
-
-/*
- * Application-accessible port name types
- */
-
-#define TIPC_CFG_SRV 0 /* configuration service name type */
-#define TIPC_TOP_SRV 1 /* topology service name type */
-#define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */
-
-/*
- * Publication scopes when binding port names and port name sequences
- */
-
-#define TIPC_ZONE_SCOPE 1
-#define TIPC_CLUSTER_SCOPE 2
-#define TIPC_NODE_SCOPE 3
-
-/*
- * Limiting values for messages
- */
-
-#define TIPC_MAX_USER_MSG_SIZE 66000U
-
-/*
- * Message importance levels
- */
-
-#define TIPC_LOW_IMPORTANCE 0
-#define TIPC_MEDIUM_IMPORTANCE 1
-#define TIPC_HIGH_IMPORTANCE 2
-#define TIPC_CRITICAL_IMPORTANCE 3
-
-/*
- * Msg rejection/connection shutdown reasons
- */
-
-#define TIPC_OK 0
-#define TIPC_ERR_NO_NAME 1
-#define TIPC_ERR_NO_PORT 2
-#define TIPC_ERR_NO_NODE 3
-#define TIPC_ERR_OVERLOAD 4
-#define TIPC_CONN_SHUTDOWN 5
-
-/*
- * TIPC topology subscription service definitions
- */
-
-#define TIPC_SUB_PORTS 0x01 /* filter for port availability */
-#define TIPC_SUB_SERVICE 0x02 /* filter for service availability */
-#define TIPC_SUB_CANCEL 0x04 /* cancel a subscription */
-
-#define TIPC_WAIT_FOREVER (~0) /* timeout for permanent subscription */
-
-struct tipc_subscr {
- struct tipc_name_seq seq; /* name sequence of interest */
- __u32 timeout; /* subscription duration (in ms) */
- __u32 filter; /* bitmask of filter options */
- char usr_handle[8]; /* available for subscriber use */
-};
-
-#define TIPC_PUBLISHED 1 /* publication event */
-#define TIPC_WITHDRAWN 2 /* withdraw event */
-#define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */
-
-struct tipc_event {
- __u32 event; /* event type */
- __u32 found_lower; /* matching name seq instances */
- __u32 found_upper; /* " " " " */
- struct tipc_portid port; /* associated port */
- struct tipc_subscr s; /* associated subscription */
-};
-
-/*
- * Socket API
- */
-
-#ifndef AF_TIPC
-#define AF_TIPC 30
-#endif
-
-#ifndef PF_TIPC
-#define PF_TIPC AF_TIPC
-#endif
-
-#ifndef SOL_TIPC
-#define SOL_TIPC 271
-#endif
-
-#define TIPC_ADDR_NAMESEQ 1
-#define TIPC_ADDR_MCAST 1
-#define TIPC_ADDR_NAME 2
-#define TIPC_ADDR_ID 3
-
-struct sockaddr_tipc {
- unsigned short family;
- unsigned char addrtype;
- signed char scope;
- union {
- struct tipc_portid id;
- struct tipc_name_seq nameseq;
- struct {
- struct tipc_name name;
- __u32 domain;
- } name;
- } addr;
-};
-
-/*
- * Ancillary data objects supported by recvmsg()
- */
-
-#define TIPC_ERRINFO 1 /* error info */
-#define TIPC_RETDATA 2 /* returned data */
-#define TIPC_DESTNAME 3 /* destination name */
-
-/*
- * TIPC-specific socket option values
- */
-
-#define TIPC_IMPORTANCE 127 /* Default: TIPC_LOW_IMPORTANCE */
-#define TIPC_SRC_DROPPABLE 128 /* Default: based on socket type */
-#define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */
-#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */
-#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */
-#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */
-
-#endif
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
deleted file mode 100644
index 0b1e3f2..0000000
--- a/include/linux/tipc_config.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * include/linux/tipc_config.h: Include file for TIPC configuration interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_CONFIG_H_
-#define _LINUX_TIPC_CONFIG_H_
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#ifndef __KERNEL__
-#include <arpa/inet.h> /* for ntohs etc. */
-#endif
-
-/*
- * Configuration
- *
- * All configuration management messaging involves sending a request message
- * to the TIPC configuration service on a node, which sends a reply message
- * back. (In the future multi-message replies may be supported.)
- *
- * Both request and reply messages consist of a transport header and payload.
- * The transport header contains info about the desired operation;
- * the payload consists of zero or more type/length/value (TLV) items
- * which specify parameters or results for the operation.
- *
- * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return
- * a variable number of TLVs. A failed request is denoted by the presence
- * of an "error string" TLV in the reply message instead of the TLV(s) the
- * reply should contain if the request succeeds.
- */
-
-/*
- * Public commands:
- * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.
- */
-
-#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
-#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */
-#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
-#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
-#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */
-#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */
-#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
-#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */
-#define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */
-
-/*
- * Protected commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.
- */
-
-#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
-#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */
-#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */
-#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */
-#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */
-#define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */
-#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */
-#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
-
-#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */
-#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */
-#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */
-#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */
-#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */
-#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */
-
-/*
- * Private commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.
- */
-
-#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */
-#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */
-#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */
-#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */
-#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */
-#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */
-#define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */
-#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */
-#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */
-
-/*
- * Reserved commands:
- * May not be issued by any process.
- * Used internally by TIPC.
- */
-
-#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */
-
-/*
- * TLV types defined for TIPC
- */
-
-#define TIPC_TLV_NONE 0 /* no TLV present */
-#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/
-#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */
-#define TIPC_TLV_STRING 3 /* char[128] (max) */
-#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */
-#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */
-
-#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
-#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */
-#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */
-#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */
-#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */
-#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
-#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
-
-/*
- * Maximum sizes of TIPC bearer-related names (including terminating NUL)
- */
-
-#define TIPC_MAX_MEDIA_NAME 16 /* format = media */
-#define TIPC_MAX_IF_NAME 16 /* format = interface */
-#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */
-#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */
-
-/*
- * Link priority limits (min, default, max, media default)
- */
-
-#define TIPC_MIN_LINK_PRI 0
-#define TIPC_DEF_LINK_PRI 10
-#define TIPC_MAX_LINK_PRI 31
-#define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1)
-
-/*
- * Link tolerance limits (min, default, max), in ms
- */
-
-#define TIPC_MIN_LINK_TOL 50
-#define TIPC_DEF_LINK_TOL 1500
-#define TIPC_MAX_LINK_TOL 30000
-
-#if (TIPC_MIN_LINK_TOL < 16)
-#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
-#endif
-
-/*
- * Link window limits (min, default, max), in packets
- */
-
-#define TIPC_MIN_LINK_WIN 16
-#define TIPC_DEF_LINK_WIN 50
-#define TIPC_MAX_LINK_WIN 150
-
-
-struct tipc_node_info {
- __be32 addr; /* network address of node */
- __be32 up; /* 0=down, 1= up */
-};
-
-struct tipc_link_info {
- __be32 dest; /* network address of peer node */
- __be32 up; /* 0=down, 1=up */
- char str[TIPC_MAX_LINK_NAME]; /* link name */
-};
-
-struct tipc_bearer_config {
- __be32 priority; /* Range [1,31]. Override per link */
- __be32 disc_domain; /* <Z.C.N> describing desired nodes */
- char name[TIPC_MAX_BEARER_NAME];
-};
-
-struct tipc_link_config {
- __be32 value;
- char name[TIPC_MAX_LINK_NAME];
-};
-
-#define TIPC_NTQ_ALLTYPES 0x80000000
-
-struct tipc_name_table_query {
- __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
- __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */
- __be32 lowbound; /* (i.e. displays all entries of name table) */
- __be32 upbound;
-};
-
-/*
- * The error string TLV is a null-terminated string describing the cause
- * of the request failure. To simplify error processing (and to save space)
- * the first character of the string can be a special error code character
- * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
- */
-
-#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */
-#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */
-#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */
-#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */
-#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */
-#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */
-
-/*
- * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order;
- * TLV values must also be stored in network byte order (where applicable).
- * TLV descriptors must be aligned to addresses which are multiple of 4,
- * so up to 3 bytes of padding may exist at the end of the TLV value area.
- * There must not be any padding between the TLV descriptor and its value.
- */
-
-struct tlv_desc {
- __be16 tlv_len; /* TLV length (descriptor + value) */
- __be16 tlv_type; /* TLV identifier */
-};
-
-#define TLV_ALIGNTO 4
-
-#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
-#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
-#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
-#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
-
-static inline int TLV_OK(const void *tlv, __u16 space)
-{
- /*
- * Would also like to check that "tlv" is a multiple of 4,
- * but don't know how to do this in a portable way.
- * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
- * won't allow binary "&" with a pointer.
- * - Tried casting "tlv" to integer type, but causes warning about size
- * mismatch when pointer is bigger than chosen type (int, long, ...).
- */
-
- return (space >= TLV_SPACE(0)) &&
- (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
-}
-
-static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
-{
- return TLV_OK(tlv, space) &&
- (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
-}
-
-static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
-{
- struct tlv_desc *tlv_ptr;
- int tlv_len;
-
- tlv_len = TLV_LENGTH(len);
- tlv_ptr = (struct tlv_desc *)tlv;
- tlv_ptr->tlv_type = htons(type);
- tlv_ptr->tlv_len = htons(tlv_len);
- if (len && data)
- memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
- return TLV_SPACE(len);
-}
-
-/*
- * A TLV list descriptor simplifies processing of messages
- * containing multiple TLVs.
- */
-
-struct tlv_list_desc {
- struct tlv_desc *tlv_ptr; /* ptr to current TLV */
- __u32 tlv_space; /* # bytes from curr TLV to list end */
-};
-
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
- void *data, __u32 space)
-{
- list->tlv_ptr = (struct tlv_desc *)data;
- list->tlv_space = space;
-}
-
-static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{
- return (list->tlv_space == 0);
-}
-
-static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
-{
- return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
-}
-
-static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
-{
- return TLV_DATA(list->tlv_ptr);
-}
-
-static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
-{
- __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
-
- list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
- list->tlv_space -= tlv_space;
-}
-
-/*
- * Configuration messages exchanged via NETLINK_GENERIC use the following
- * family id, name, version and command.
- */
-#define TIPC_GENL_NAME "TIPC"
-#define TIPC_GENL_VERSION 0x1
-#define TIPC_GENL_CMD 0x1
-
-/*
- * TIPC specific header used in NETLINK_GENERIC requests.
- */
-struct tipc_genlmsghdr {
- __u32 dest; /* Destination address */
- __u16 cmd; /* Command */
- __u16 reserved; /* Unused */
-};
-
-#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
-
-/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration
- * message header, which is defined below. This structure is analogous
- * to the Netlink message header, but fields are stored in network byte order
- * and no padding is permitted between the header and the message data
- * that follows.
- */
-
-struct tipc_cfg_msg_hdr {
- __be32 tcm_len; /* Message length (including header) */
- __be16 tcm_type; /* Command type */
- __be16 tcm_flags; /* Additional flags */
- char tcm_reserved[8]; /* Unused */
-};
-
-#define TCM_F_REQUEST 0x1 /* Flag: Request message */
-#define TCM_F_MORE 0x2 /* Flag: Message to be continued */
-
-#define TCM_ALIGN(datalen) (((datalen)+3) & ~3)
-#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
-#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen)))
-#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
-
-static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
- void *data, __u16 data_len)
-{
- struct tipc_cfg_msg_hdr *tcm_hdr;
- int msg_len;
-
- msg_len = TCM_LENGTH(data_len);
- tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
- tcm_hdr->tcm_len = htonl(msg_len);
- tcm_hdr->tcm_type = htons(cmd);
- tcm_hdr->tcm_flags = htons(flags);
- if (data_len && data)
- memcpy(TCM_DATA(msg), data, data_len);
- return TCM_SPACE(data_len);
-}
-
-#endif
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
index 772dedb..915c3bb 100644
--- a/include/linux/toshiba.h
+++ b/include/linux/toshiba.h
@@ -16,25 +16,10 @@
* General Public License for more details.
*
*/
-
#ifndef _LINUX_TOSHIBA_H
#define _LINUX_TOSHIBA_H
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */
-
-typedef struct {
- unsigned int eax;
- unsigned int ebx __attribute__ ((packed));
- unsigned int ecx __attribute__ ((packed));
- unsigned int edx __attribute__ ((packed));
- unsigned int esi __attribute__ ((packed));
- unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
+#include <uapi/linux/toshiba.h>
-#ifdef __KERNEL__
int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4f6c59a..f0b4eb47 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -1,41 +1,6 @@
#ifndef _LINUX_TTY_H
#define _LINUX_TTY_H
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS 30
-
-/* line disciplines */
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
-#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
- /* cards about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14 /* synchronous PPP */
-#define N_HCI 15 /* Bluetooth HCI UART */
-#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
-#define N_PPS 18 /* Pulse per Second */
-#define N_V253 19 /* Codec control over voice modem */
-#define N_CAIF 20 /* CAIF protocol for talking to modems */
-#define N_GSM0710 21 /* GSM 0710 Mux */
-#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/termios.h>
@@ -44,6 +9,7 @@
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
#include <linux/tty_flags.h>
+#include <uapi/linux/tty.h>
@@ -694,5 +660,4 @@ do { \
} while (0)
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
deleted file mode 100644
index eefcb48..0000000
--- a/include/linux/tty_flags.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _LINUX_TTY_FLAGS_H
-#define _LINUX_TTY_FLAGS_H
-
-/*
- * Definitions for async_struct (and serial_struct) flags field also
- * shared by the tty_port flags structures.
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
- * on the callout port */
-#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
- * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
-#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
- * checks. Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER 15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING 27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW 23 /* flow control for console */
-#define ASYNCB_FIRST_KERNEL 22
-
-#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK (1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
- ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
-
-#endif
diff --git a/include/linux/types.h b/include/linux/types.h
index bf0dd75..1cc0e4b 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,22 +1,13 @@
#ifndef _LINUX_TYPES_H
#define _LINUX_TYPES_H
-#include <asm/types.h>
+#define __EXPORTED_HEADERS__
+#include <uapi/linux/types.h>
#ifndef __ASSEMBLY__
-#ifdef __KERNEL__
#define DECLARE_BITMAP(name,bits) \
unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
typedef __u32 __kernel_dev_t;
@@ -157,48 +148,12 @@ typedef u64 dma_addr_t;
typedef u32 dma_addr_t;
#endif /* dma_addr_t */
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
#ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
#else
-#define __bitwise__
#endif
#ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
#else
-#define __bitwise
#endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures. The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
typedef unsigned __bitwise__ gfp_t;
typedef unsigned __bitwise__ fmode_t;
@@ -256,6 +211,5 @@ struct callback_head {
};
#define rcu_head callback_head
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h
deleted file mode 100644
index 3536965..0000000
--- a/include/linux/udf_fs_i.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * udf_fs_i.h
- *
- * This file is intended for the Linux kernel/module.
- *
- * COPYRIGHT
- * This file is distributed under the terms of the GNU General Public
- * License (GPL). Copies of the GPL can be obtained from:
- * ftp://prep.ai.mit.edu/pub/gnu/GPL
- * Each contributing author retains all rights to their own work.
- */
-#ifndef _UDF_FS_I_H
-#define _UDF_FS_I_H 1
-
-/* exported IOCTLs, we have 'l', 0x40-0x7f */
-#define UDF_GETEASIZE _IOR('l', 0x40, int)
-#define UDF_GETEABLOCK _IOR('l', 0x41, void *)
-#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
-#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
-
-#endif /* _UDF_FS_I_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 03f72a2..0b67d77 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -17,28 +17,10 @@
#ifndef _LINUX_UDP_H
#define _LINUX_UDP_H
-#include <linux/types.h>
-
-struct udphdr {
- __be16 source;
- __be16 dest;
- __be16 len;
- __sum16 check;
-};
-
-/* UDP socket options */
-#define UDP_CORK 1 /* Never send partially complete segments */
-#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */
-
-#ifdef __KERNEL__
#include <net/inet_sock.h>
#include <linux/skbuff.h>
#include <net/netns/hash.h>
+#include <uapi/linux/udp.h>
static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
{
@@ -96,6 +78,4 @@ static inline struct udp_sock *udp_sk(const struct sock *sk)
#define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
-#endif
-
#endif /* _LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/linux/uhid.h
deleted file mode 100644
index 9c6974f..0000000
--- a/include/linux/uhid.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __UHID_H_
-#define __UHID_H_
-
-/*
- * User-space I/O driver support for HID subsystem
- * Copyright (c) 2012 David Herrmann
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/*
- * Public header for user-space communication. We try to keep every structure
- * aligned but to be safe we also use __attribute__((__packed__)). Therefore,
- * the communication should be ABI compatible even between architectures.
- */
-
-#include <linux/input.h>
-#include <linux/types.h>
-
-enum uhid_event_type {
- UHID_CREATE,
- UHID_DESTROY,
- UHID_START,
- UHID_STOP,
- UHID_OPEN,
- UHID_CLOSE,
- UHID_OUTPUT,
- UHID_OUTPUT_EV,
- UHID_INPUT,
- UHID_FEATURE,
- UHID_FEATURE_ANSWER,
-};
-
-struct uhid_create_req {
- __u8 name[128];
- __u8 phys[64];
- __u8 uniq[64];
- __u8 __user *rd_data;
- __u16 rd_size;
-
- __u16 bus;
- __u32 vendor;
- __u32 product;
- __u32 version;
- __u32 country;
-} __attribute__((__packed__));
-
-#define UHID_DATA_MAX 4096
-
-enum uhid_report_type {
- UHID_FEATURE_REPORT,
- UHID_OUTPUT_REPORT,
- UHID_INPUT_REPORT,
-};
-
-struct uhid_input_req {
- __u8 data[UHID_DATA_MAX];
- __u16 size;
-} __attribute__((__packed__));
-
-struct uhid_output_req {
- __u8 data[UHID_DATA_MAX];
- __u16 size;
- __u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_output_ev_req {
- __u16 type;
- __u16 code;
- __s32 value;
-} __attribute__((__packed__));
-
-struct uhid_feature_req {
- __u32 id;
- __u8 rnum;
- __u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_feature_answer_req {
- __u32 id;
- __u16 err;
- __u16 size;
- __u8 data[UHID_DATA_MAX];
-};
-
-struct uhid_event {
- __u32 type;
-
- union {
- struct uhid_create_req create;
- struct uhid_input_req input;
- struct uhid_output_req output;
- struct uhid_output_ev_req output_ev;
- struct uhid_feature_req feature;
- struct uhid_feature_answer_req feature_answer;
- } u;
-} __attribute__((__packed__));
-
-#endif /* __UHID_H_ */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe..0a4487d 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
/*
* User level driver support for input subsystem
*
@@ -31,13 +29,11 @@
* 0.1 20/06/2002
* - first public version
*/
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
-#include <linux/types.h>
-#include <linux/input.h>
-
-#define UINPUT_VERSION 3
+#include <uapi/linux/uinput.h>
-#ifdef __KERNEL__
#define UINPUT_NAME "uinput"
#define UINPUT_BUFFER_SIZE 16
#define UINPUT_NUM_REQUESTS 16
@@ -75,103 +71,4 @@ struct uinput_device {
wait_queue_head_t requests_waitq;
spinlock_t requests_lock;
};
-#endif /* __KERNEL__ */
-
-struct uinput_ff_upload {
- __u32 request_id;
- __s32 retval;
- struct ff_effect effect;
- struct ff_effect old;
-};
-
-struct uinput_ff_erase {
- __u32 request_id;
- __s32 retval;
- __u32 effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE 'U'
-#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- * A request ID will be given in 'value'.
- * 2. Allocate a uinput_ff_upload struct, fill in request_id with
- * the 'value' from the EV_UINPUT event.
- * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- * uinput_ff_upload struct. It will be filled in with the
- * ff_effects passed to upload_effect().
- * 4. Perform the effect upload, and place a return code back into
- the uinput_ff_upload struct.
- * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- * uinput_ff_upload_effect struct. This will complete execution
- * of our upload_effect() handler.
- *
- * To implement erase_effect():
- * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- * A request ID will be given in 'value'.
- * 2. Allocate a uinput_ff_erase struct, fill in request_id with
- * the 'value' from the EV_UINPUT event.
- * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- * uinput_ff_erase struct. It will be filled in with the
- * effect ID passed to erase_effect().
- * 4. Perform the effect erasure, and place a return code back
- * into the uinput_ff_erase struct.
- * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- * uinput_ff_erase_effect struct. This will complete execution
- * of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT 0x0101
-#define UI_FF_UPLOAD 1
-#define UI_FF_ERASE 2
-
-#define UINPUT_MAX_NAME_SIZE 80
-struct uinput_user_dev {
- char name[UINPUT_MAX_NAME_SIZE];
- struct input_id id;
- __u32 ff_effects_max;
- __s32 absmax[ABS_CNT];
- __s32 absmin[ABS_CNT];
- __s32 absfuzz[ABS_CNT];
- __s32 absflat[ABS_CNT];
-};
#endif /* __UINPUT_H_ */
-
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 98c1143..629aaf5 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -1,9 +1,3 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
/*
* Berkeley style UIO structures - Alan Cox 1994.
*
@@ -12,21 +6,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
-struct iovec
-{
- void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
- __kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
-
-/*
- * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
-
-#define UIO_FASTIOV 8
-#define UIO_MAXIOV 1024
+#include <uapi/linux/uio.h>
-#ifdef __KERNEL__
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
@@ -52,5 +36,3 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
#endif
-
-#endif
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
deleted file mode 100644
index 71339dc..0000000
--- a/include/linux/ultrasound.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ULTRASOUND_H_
-#define _ULTRASOUND_H_
-/*
- * ultrasound.h - Macros for programming the Gravis Ultrasound
- * These macros are extremely device dependent
- * and not portable.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-/*
- * Private events for Gravis Ultrasound (GUS)
- *
- * Format:
- * byte 0 - SEQ_PRIVATE (0xfe)
- * byte 1 - Synthesizer device number (0-N)
- * byte 2 - Command (see below)
- * byte 3 - Voice number (0-31)
- * bytes 4 and 5 - parameter P1 (unsigned short)
- * bytes 6 and 7 - parameter P2 (unsigned short)
- *
- * Commands:
- * Each command affects one voice defined in byte 3.
- * Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
- * _GUS_NUMVOICES - Sets max. number of concurrent voices (P1=14-31, default 16)
- * _GUS_VOICESAMPLE- ************ OBSOLETE *************
- * _GUS_VOICEON - Starts voice (P1=voice mode)
- * _GUS_VOICEOFF - Stops voice (no parameters)
- * _GUS_VOICEFADE - Stops the voice smoothly.
- * _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode)
- * _GUS_VOICEBALA - Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
- * _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz)
- * _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- * _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- * (Like GUS_VOICEVOL but doesn't change the hw
- * volume. It just updates volume in the voice table).
- *
- * _GUS_RAMPRANGE - Sets limits for volume ramping (P1=low volume, P2=high volume)
- * _GUS_RAMPRATE - Sets the speed for volume ramping (P1=scale, P2=rate)
- * _GUS_RAMPMODE - Sets the volume ramping mode (P1=ramping mode)
- * _GUS_RAMPON - Starts volume ramping (no parameters)
- * _GUS_RAMPOFF - Stops volume ramping (no parameters)
- * _GUS_VOLUME_SCALE - Changes the volume calculation constants
- * for all voices.
- */
-
-#define _GUS_NUMVOICES 0x00
-#define _GUS_VOICESAMPLE 0x01 /* OBSOLETE */
-#define _GUS_VOICEON 0x02
-#define _GUS_VOICEOFF 0x03
-#define _GUS_VOICEMODE 0x04
-#define _GUS_VOICEBALA 0x05
-#define _GUS_VOICEFREQ 0x06
-#define _GUS_VOICEVOL 0x07
-#define _GUS_RAMPRANGE 0x08
-#define _GUS_RAMPRATE 0x09
-#define _GUS_RAMPMODE 0x0a
-#define _GUS_RAMPON 0x0b
-#define _GUS_RAMPOFF 0x0c
-#define _GUS_VOICEFADE 0x0d
-#define _GUS_VOLUME_SCALE 0x0e
-#define _GUS_VOICEVOL2 0x0f
-#define _GUS_VOICE_POS 0x10
-
-/*
- * GUS API macros
- */
-
-#define _GUS_CMD(chn, voice, cmd, p1, p2) \
- {_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
- _seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
- _seqbuf[_seqbufptr+3] = voice;\
- *(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
- *(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
- _SEQ_ADVBUF(8);}
-
-#define GUS_NUMVOICES(chn, p1) _GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
-#define GUS_VOICESAMPLE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0) /* OBSOLETE */
-#define GUS_VOICEON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
-#define GUS_VOICEOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
-#define GUS_VOICEFADE(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
-#define GUS_VOICEMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
-#define GUS_VOICEBALA(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
-#define GUS_VOICEFREQ(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
- (p) & 0xffff, ((p) >> 16) & 0xffff)
-#define GUS_VOICEVOL(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
-#define GUS_VOICEVOL2(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
-#define GUS_RAMPRANGE(chn, voice, low, high) _GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
-#define GUS_RAMPRATE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
-#define GUS_RAMPMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
-#define GUS_RAMPON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
-#define GUS_RAMPOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
-#define GUS_VOLUME_SCALE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
-#define GUS_VOICE_POS(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICE_POS, \
- (p) & 0xffff, ((p) >> 16) & 0xffff)
-
-#endif
diff --git a/include/linux/un.h b/include/linux/un.h
deleted file mode 100644
index 3ed3e46..0000000
--- a/include/linux/un.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_UN_H
-#define _LINUX_UN_H
-
-#include <linux/socket.h>
-
-#define UNIX_PATH_MAX 108
-
-struct sockaddr_un {
- __kernel_sa_family_t sun_family; /* AF_UNIX */
- char sun_path[UNIX_PATH_MAX]; /* pathname */
-};
-
-#endif /* _LINUX_UN_H */
diff --git a/include/linux/unistd.h b/include/linux/unistd.h
deleted file mode 100644
index aa8d5b5..0000000
--- a/include/linux/unistd.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_UNISTD_H_
-#define _LINUX_UNISTD_H_
-
-/*
- * Include machine specific syscall numbers
- */
-#include <asm/unistd.h>
-
-#endif /* _LINUX_UNISTD_H_ */
diff --git a/include/linux/unix_diag.h b/include/linux/unix_diag.h
deleted file mode 100644
index b1d2bf1..0000000
--- a/include/linux/unix_diag.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef __UNIX_DIAG_H__
-#define __UNIX_DIAG_H__
-
-#include <linux/types.h>
-
-struct unix_diag_req {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
- __u16 pad;
- __u32 udiag_states;
- __u32 udiag_ino;
- __u32 udiag_show;
- __u32 udiag_cookie[2];
-};
-
-#define UDIAG_SHOW_NAME 0x00000001 /* show name (not path) */
-#define UDIAG_SHOW_VFS 0x00000002 /* show VFS inode info */
-#define UDIAG_SHOW_PEER 0x00000004 /* show peer socket info */
-#define UDIAG_SHOW_ICONS 0x00000008 /* show pending connections */
-#define UDIAG_SHOW_RQLEN 0x00000010 /* show skb receive queue len */
-#define UDIAG_SHOW_MEMINFO 0x00000020 /* show memory info of a socket */
-
-struct unix_diag_msg {
- __u8 udiag_family;
- __u8 udiag_type;
- __u8 udiag_state;
- __u8 pad;
-
- __u32 udiag_ino;
- __u32 udiag_cookie[2];
-};
-
-enum {
- UNIX_DIAG_NAME,
- UNIX_DIAG_VFS,
- UNIX_DIAG_PEER,
- UNIX_DIAG_ICONS,
- UNIX_DIAG_RQLEN,
- UNIX_DIAG_MEMINFO,
-
- UNIX_DIAG_MAX,
-};
-
-struct unix_diag_vfs {
- __u32 udiag_vfs_ino;
- __u32 udiag_vfs_dev;
-};
-
-struct unix_diag_rqlen {
- __u32 udiag_rqueue;
- __u32 udiag_wqueue;
-};
-
-#endif
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 4abe28e4..04a2628 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -25,126 +25,11 @@
*/
/*****************************************************************************/
-
#ifndef _LINUX_USBDEVICE_FS_H
#define _LINUX_USBDEVICE_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
- __u8 bRequestType;
- __u8 bRequest;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
- __u32 timeout; /* in milliseconds */
- void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
- unsigned int ep;
- unsigned int len;
- unsigned int timeout; /* in milliseconds */
- void __user *data;
-};
-
-struct usbdevfs_setinterface {
- unsigned int interface;
- unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
- unsigned int signr;
- void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
- unsigned int interface;
- char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
- unsigned int devnum;
- unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK 0x01
-#define USBDEVFS_URB_ISO_ASAP 0x02
-#define USBDEVFS_URB_BULK_CONTINUATION 0x04
-#define USBDEVFS_URB_NO_FSBR 0x20
-#define USBDEVFS_URB_ZERO_PACKET 0x40
-#define USBDEVFS_URB_NO_INTERRUPT 0x80
-
-#define USBDEVFS_URB_TYPE_ISO 0
-#define USBDEVFS_URB_TYPE_INTERRUPT 1
-#define USBDEVFS_URB_TYPE_CONTROL 2
-#define USBDEVFS_URB_TYPE_BULK 3
+#include <uapi/linux/usbdevice_fs.h>
-struct usbdevfs_iso_packet_desc {
- unsigned int length;
- unsigned int actual_length;
- unsigned int status;
-};
-
-struct usbdevfs_urb {
- unsigned char type;
- unsigned char endpoint;
- int status;
- unsigned int flags;
- void __user *buffer;
- int buffer_length;
- int actual_length;
- int start_frame;
- int number_of_packets;
- int error_count;
- unsigned int signr; /* signal to be sent on completion,
- or 0 if none should be sent. */
- void __user *usercontext;
- struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
- int ifno; /* interface 0..N ; negative numbers reserved */
- int ioctl_code; /* MUST encode size + direction of data so the
- * macros in <asm/ioctl.h> give correct values */
- void __user *data; /* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
- char nports; /* number of downstream ports in this hub */
- char port [127]; /* e.g. port 3 connects to device 27 */
-};
-
-/* Device capability flags */
-#define USBDEVFS_CAP_ZERO_PACKET 0x01
-#define USBDEVFS_CAP_BULK_CONTINUATION 0x02
-#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04
-#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08
-
-/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
-
-/* disconnect-and-claim if the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01
-/* disconnect-and-claim except when the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02
-
-struct usbdevfs_disconnect_claim {
- unsigned int interface;
- unsigned int flags;
- char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -192,38 +77,4 @@ struct usbdevfs_ioctl32 {
compat_caddr_t data;
};
#endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB _IO('U', 11)
-#define USBDEVFS_REAPURB _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT _IO('U', 22)
-#define USBDEVFS_CONNECT _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int)
-#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32)
-#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim)
-
#endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utime.h b/include/linux/utime.h
deleted file mode 100644
index 5cdf673..0000000
--- a/include/linux/utime.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_UTIME_H
-#define _LINUX_UTIME_H
-
-#include <linux/types.h>
-
-struct utimbuf {
- __kernel_time_t actime;
- __kernel_time_t modtime;
-};
-
-#endif
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index c714ed7..2b34520 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -1,41 +1,12 @@
#ifndef _LINUX_UTSNAME_H
#define _LINUX_UTSNAME_H
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
- char sysname[9];
- char nodename[9];
- char release[9];
- char version[9];
- char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
- char sysname[65];
- char nodename[65];
- char release[65];
- char version[65];
- char machine[65];
-};
-
-struct new_utsname {
- char sysname[__NEW_UTS_LEN + 1];
- char nodename[__NEW_UTS_LEN + 1];
- char release[__NEW_UTS_LEN + 1];
- char version[__NEW_UTS_LEN + 1];
- char machine[__NEW_UTS_LEN + 1];
- char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/kref.h>
#include <linux/nsproxy.h>
#include <linux/err.h>
+#include <uapi/linux/utsname.h>
enum uts_proc {
UTS_PROC_OSTYPE,
@@ -108,6 +79,4 @@ static inline struct new_utsname *init_utsname(void)
extern struct rw_semaphore uts_sem;
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index f86c37b..6df2509 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -17,44 +17,11 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
#ifndef _LINUX_UUID_H_
#define _LINUX_UUID_H_
-#include <linux/types.h>
-#include <linux/string.h>
-
-typedef struct {
- __u8 b[16];
-} uuid_le;
-
-typedef struct {
- __u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
-((uuid_le) \
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
- (b) & 0xff, ((b) >> 8) & 0xff, \
- (c) & 0xff, ((c) >> 8) & 0xff, \
- (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+#include <uapi/linux/uuid.h>
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
-((uuid_be) \
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
- ((b) >> 8) & 0xff, (b) & 0xff, \
- ((c) >> 8) & 0xff, (c) & 0xff, \
- (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE \
- UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE \
- UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
-#ifdef __KERNEL__
static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
{
@@ -69,6 +36,4 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
extern void uuid_le_gen(uuid_le *u);
extern void uuid_be_gen(uuid_be *u);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h
deleted file mode 100644
index 3b08186..0000000
--- a/include/linux/uvcvideo.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __LINUX_UVCVIDEO_H_
-#define __LINUX_UVCVIDEO_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * Dynamic controls
- */
-
-/* Data types for UVC control data */
-#define UVC_CTRL_DATA_TYPE_RAW 0
-#define UVC_CTRL_DATA_TYPE_SIGNED 1
-#define UVC_CTRL_DATA_TYPE_UNSIGNED 2
-#define UVC_CTRL_DATA_TYPE_BOOLEAN 3
-#define UVC_CTRL_DATA_TYPE_ENUM 4
-#define UVC_CTRL_DATA_TYPE_BITMASK 5
-
-/* Control flags */
-#define UVC_CTRL_FLAG_SET_CUR (1 << 0)
-#define UVC_CTRL_FLAG_GET_CUR (1 << 1)
-#define UVC_CTRL_FLAG_GET_MIN (1 << 2)
-#define UVC_CTRL_FLAG_GET_MAX (1 << 3)
-#define UVC_CTRL_FLAG_GET_RES (1 << 4)
-#define UVC_CTRL_FLAG_GET_DEF (1 << 5)
-/* Control should be saved at suspend and restored at resume. */
-#define UVC_CTRL_FLAG_RESTORE (1 << 6)
-/* Control can be updated by the camera. */
-#define UVC_CTRL_FLAG_AUTO_UPDATE (1 << 7)
-
-#define UVC_CTRL_FLAG_GET_RANGE \
- (UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \
- UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \
- UVC_CTRL_FLAG_GET_DEF)
-
-struct uvc_menu_info {
- __u32 value;
- __u8 name[32];
-};
-
-struct uvc_xu_control_mapping {
- __u32 id;
- __u8 name[32];
- __u8 entity[16];
- __u8 selector;
-
- __u8 size;
- __u8 offset;
- __u32 v4l2_type;
- __u32 data_type;
-
- struct uvc_menu_info __user *menu_info;
- __u32 menu_count;
-
- __u32 reserved[4];
-};
-
-struct uvc_xu_control_query {
- __u8 unit;
- __u8 selector;
- __u8 query; /* Video Class-Specific Request Code, */
- /* defined in linux/usb/video.h A.8. */
- __u16 size;
- __u8 __user *data;
-};
-
-#define UVCIOC_CTRL_MAP _IOWR('u', 0x20, struct uvc_xu_control_mapping)
-#define UVCIOC_CTRL_QUERY _IOWR('u', 0x21, struct uvc_xu_control_query)
-
-#endif
diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h
deleted file mode 100644
index 4f0667e..0000000
--- a/include/linux/v4l2-common.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/linux/v4l2-common.h
- *
- * Common V4L2 and V4L2 subdev definitions.
- *
- * Users are advised to #include this file either through videodev2.h
- * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer
- * to this file directly.
- *
- * Copyright (C) 2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __V4L2_COMMON__
-#define __V4L2_COMMON__
-
-/*
- *
- * Selection interface definitions
- *
- */
-
-/* Current cropping area */
-#define V4L2_SEL_TGT_CROP 0x0000
-/* Default cropping area */
-#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001
-/* Cropping bounds */
-#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002
-/* Current composing area */
-#define V4L2_SEL_TGT_COMPOSE 0x0100
-/* Default composing area */
-#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101
-/* Composing bounds */
-#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102
-/* Current composing area plus all padding pixels */
-#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103
-
-/* Backward compatibility target definitions --- to be removed. */
-#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP
-#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE
-#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL V4L2_SEL_TGT_CROP
-#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL V4L2_SEL_TGT_COMPOSE
-#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS V4L2_SEL_TGT_CROP_BOUNDS
-#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS V4L2_SEL_TGT_COMPOSE_BOUNDS
-
-/* Selection flags */
-#define V4L2_SEL_FLAG_GE (1 << 0)
-#define V4L2_SEL_FLAG_LE (1 << 1)
-#define V4L2_SEL_FLAG_KEEP_CONFIG (1 << 2)
-
-/* Backward compatibility flag definitions --- to be removed. */
-#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE V4L2_SEL_FLAG_GE
-#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE V4L2_SEL_FLAG_LE
-#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG
-
-#endif /* __V4L2_COMMON__ */
diff --git a/include/linux/v4l2-controls.h b/include/linux/v4l2-controls.h
deleted file mode 100644
index f56c945..0000000
--- a/include/linux/v4l2-controls.h
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Video for Linux Two controls header file
- *
- * Copyright (C) 1999-2012 the contributors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Alternatively you can redistribute this file under the terms of the
- * BSD license as stated below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * 3. The names of its contributors may not be used to endorse or promote
- * products derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * The contents of this header was split off from videodev2.h. All control
- * definitions should be added to this header, which is included by
- * videodev2.h.
- */
-
-#ifndef __LINUX_V4L2_CONTROLS_H
-#define __LINUX_V4L2_CONTROLS_H
-
-/* Control classes */
-#define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */
-#define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */
-#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */
-#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */
-#define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */
-#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */
-#define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */
-#define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */
-#define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */
-
-/* User-class control IDs */
-
-#define V4L2_CID_BASE (V4L2_CTRL_CLASS_USER | 0x900)
-#define V4L2_CID_USER_BASE V4L2_CID_BASE
-#define V4L2_CID_USER_CLASS (V4L2_CTRL_CLASS_USER | 1)
-#define V4L2_CID_BRIGHTNESS (V4L2_CID_BASE+0)
-#define V4L2_CID_CONTRAST (V4L2_CID_BASE+1)
-#define V4L2_CID_SATURATION (V4L2_CID_BASE+2)
-#define V4L2_CID_HUE (V4L2_CID_BASE+3)
-#define V4L2_CID_AUDIO_VOLUME (V4L2_CID_BASE+5)
-#define V4L2_CID_AUDIO_BALANCE (V4L2_CID_BASE+6)
-#define V4L2_CID_AUDIO_BASS (V4L2_CID_BASE+7)
-#define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8)
-#define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9)
-#define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10)
-#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) /* Deprecated */
-#define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12)
-#define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13)
-#define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14)
-#define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15)
-#define V4L2_CID_GAMMA (V4L2_CID_BASE+16)
-#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* Deprecated */
-#define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17)
-#define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18)
-#define V4L2_CID_GAIN (V4L2_CID_BASE+19)
-#define V4L2_CID_HFLIP (V4L2_CID_BASE+20)
-#define V4L2_CID_VFLIP (V4L2_CID_BASE+21)
-
-/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER (V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER (V4L2_CID_BASE+23)
-
-#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24)
-enum v4l2_power_line_frequency {
- V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0,
- V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1,
- V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2,
- V4L2_CID_POWER_LINE_FREQUENCY_AUTO = 3,
-};
-#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25)
-#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26)
-#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27)
-#define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28)
-#define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29)
-#define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30)
-#define V4L2_CID_COLORFX (V4L2_CID_BASE+31)
-enum v4l2_colorfx {
- V4L2_COLORFX_NONE = 0,
- V4L2_COLORFX_BW = 1,
- V4L2_COLORFX_SEPIA = 2,
- V4L2_COLORFX_NEGATIVE = 3,
- V4L2_COLORFX_EMBOSS = 4,
- V4L2_COLORFX_SKETCH = 5,
- V4L2_COLORFX_SKY_BLUE = 6,
- V4L2_COLORFX_GRASS_GREEN = 7,
- V4L2_COLORFX_SKIN_WHITEN = 8,
- V4L2_COLORFX_VIVID = 9,
- V4L2_COLORFX_AQUA = 10,
- V4L2_COLORFX_ART_FREEZE = 11,
- V4L2_COLORFX_SILHOUETTE = 12,
- V4L2_COLORFX_SOLARIZATION = 13,
- V4L2_COLORFX_ANTIQUE = 14,
- V4L2_COLORFX_SET_CBCR = 15,
-};
-#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
-#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
-
-#define V4L2_CID_ROTATE (V4L2_CID_BASE+34)
-#define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35)
-
-#define V4L2_CID_CHROMA_GAIN (V4L2_CID_BASE+36)
-
-#define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37)
-#define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38)
-
-#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE (V4L2_CID_BASE+39)
-#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT (V4L2_CID_BASE+40)
-
-#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41)
-#define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42)
-
-/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43)
-
-
-/* MPEG-class control IDs */
-
-#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
-#define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1)
-
-/* MPEG streams, specific to multiplexed streams */
-#define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_MPEG_BASE+0)
-enum v4l2_mpeg_stream_type {
- V4L2_MPEG_STREAM_TYPE_MPEG2_PS = 0, /* MPEG-2 program stream */
- V4L2_MPEG_STREAM_TYPE_MPEG2_TS = 1, /* MPEG-2 transport stream */
- V4L2_MPEG_STREAM_TYPE_MPEG1_SS = 2, /* MPEG-1 system stream */
- V4L2_MPEG_STREAM_TYPE_MPEG2_DVD = 3, /* MPEG-2 DVD-compatible stream */
- V4L2_MPEG_STREAM_TYPE_MPEG1_VCD = 4, /* MPEG-1 VCD-compatible stream */
- V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
-};
-#define V4L2_CID_MPEG_STREAM_PID_PMT (V4L2_CID_MPEG_BASE+1)
-#define V4L2_CID_MPEG_STREAM_PID_AUDIO (V4L2_CID_MPEG_BASE+2)
-#define V4L2_CID_MPEG_STREAM_PID_VIDEO (V4L2_CID_MPEG_BASE+3)
-#define V4L2_CID_MPEG_STREAM_PID_PCR (V4L2_CID_MPEG_BASE+4)
-#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (V4L2_CID_MPEG_BASE+5)
-#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (V4L2_CID_MPEG_BASE+6)
-#define V4L2_CID_MPEG_STREAM_VBI_FMT (V4L2_CID_MPEG_BASE+7)
-enum v4l2_mpeg_stream_vbi_fmt {
- V4L2_MPEG_STREAM_VBI_FMT_NONE = 0, /* No VBI in the MPEG stream */
- V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1, /* VBI in private packets, IVTV format */
-};
-
-/* MPEG audio controls specific to multiplexed streams */
-#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_MPEG_BASE+100)
-enum v4l2_mpeg_audio_sampling_freq {
- V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
- V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
- V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_ENCODING (V4L2_CID_MPEG_BASE+101)
-enum v4l2_mpeg_audio_encoding {
- V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
- V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
- V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
- V4L2_MPEG_AUDIO_ENCODING_AAC = 3,
- V4L2_MPEG_AUDIO_ENCODING_AC3 = 4,
-};
-#define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102)
-enum v4l2_mpeg_audio_l1_bitrate {
- V4L2_MPEG_AUDIO_L1_BITRATE_32K = 0,
- V4L2_MPEG_AUDIO_L1_BITRATE_64K = 1,
- V4L2_MPEG_AUDIO_L1_BITRATE_96K = 2,
- V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
- V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
- V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
- V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
- V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
- V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
- V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
- V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
- V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
- V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
- V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L2_BITRATE (V4L2_CID_MPEG_BASE+103)
-enum v4l2_mpeg_audio_l2_bitrate {
- V4L2_MPEG_AUDIO_L2_BITRATE_32K = 0,
- V4L2_MPEG_AUDIO_L2_BITRATE_48K = 1,
- V4L2_MPEG_AUDIO_L2_BITRATE_56K = 2,
- V4L2_MPEG_AUDIO_L2_BITRATE_64K = 3,
- V4L2_MPEG_AUDIO_L2_BITRATE_80K = 4,
- V4L2_MPEG_AUDIO_L2_BITRATE_96K = 5,
- V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
- V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
- V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
- V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
- V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
- V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
- V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
- V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L3_BITRATE (V4L2_CID_MPEG_BASE+104)
-enum v4l2_mpeg_audio_l3_bitrate {
- V4L2_MPEG_AUDIO_L3_BITRATE_32K = 0,
- V4L2_MPEG_AUDIO_L3_BITRATE_40K = 1,
- V4L2_MPEG_AUDIO_L3_BITRATE_48K = 2,
- V4L2_MPEG_AUDIO_L3_BITRATE_56K = 3,
- V4L2_MPEG_AUDIO_L3_BITRATE_64K = 4,
- V4L2_MPEG_AUDIO_L3_BITRATE_80K = 5,
- V4L2_MPEG_AUDIO_L3_BITRATE_96K = 6,
- V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
- V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
- V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
- V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
- V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
- V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
- V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE (V4L2_CID_MPEG_BASE+105)
-enum v4l2_mpeg_audio_mode {
- V4L2_MPEG_AUDIO_MODE_STEREO = 0,
- V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
- V4L2_MPEG_AUDIO_MODE_DUAL = 2,
- V4L2_MPEG_AUDIO_MODE_MONO = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (V4L2_CID_MPEG_BASE+106)
-enum v4l2_mpeg_audio_mode_extension {
- V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4 = 0,
- V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8 = 1,
- V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
- V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_EMPHASIS (V4L2_CID_MPEG_BASE+107)
-enum v4l2_mpeg_audio_emphasis {
- V4L2_MPEG_AUDIO_EMPHASIS_NONE = 0,
- V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
- V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17 = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_CRC (V4L2_CID_MPEG_BASE+108)
-enum v4l2_mpeg_audio_crc {
- V4L2_MPEG_AUDIO_CRC_NONE = 0,
- V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
-};
-#define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109)
-#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_MPEG_BASE+110)
-#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+111)
-enum v4l2_mpeg_audio_ac3_bitrate {
- V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0,
- V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1,
- V4L2_MPEG_AUDIO_AC3_BITRATE_48K = 2,
- V4L2_MPEG_AUDIO_AC3_BITRATE_56K = 3,
- V4L2_MPEG_AUDIO_AC3_BITRATE_64K = 4,
- V4L2_MPEG_AUDIO_AC3_BITRATE_80K = 5,
- V4L2_MPEG_AUDIO_AC3_BITRATE_96K = 6,
- V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
- V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
- V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
- V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
- V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
- V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
- V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
- V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
- V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
- V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
- V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
- V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112)
-enum v4l2_mpeg_audio_dec_playback {
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0,
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1,
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2,
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3,
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4,
- V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
-
-/* MPEG video controls specific to multiplexed streams */
-#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200)
-enum v4l2_mpeg_video_encoding {
- V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0,
- V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1,
- V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_MPEG_BASE+201)
-enum v4l2_mpeg_video_aspect {
- V4L2_MPEG_VIDEO_ASPECT_1x1 = 0,
- V4L2_MPEG_VIDEO_ASPECT_4x3 = 1,
- V4L2_MPEG_VIDEO_ASPECT_16x9 = 2,
- V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
-};
-#define V4L2_CID_MPEG_VIDEO_B_FRAMES (V4L2_CID_MPEG_BASE+202)
-#define V4L2_CID_MPEG_VIDEO_GOP_SIZE (V4L2_CID_MPEG_BASE+203)
-#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (V4L2_CID_MPEG_BASE+204)
-#define V4L2_CID_MPEG_VIDEO_PULLDOWN (V4L2_CID_MPEG_BASE+205)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE (V4L2_CID_MPEG_BASE+206)
-enum v4l2_mpeg_video_bitrate_mode {
- V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
- V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_MPEG_BASE+207)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_MPEG_BASE+208)
-#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
-#define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210)
-#define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211)
-#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (V4L2_CID_MPEG_BASE+212)
-#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (V4L2_CID_MPEG_BASE+213)
-#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (V4L2_CID_MPEG_BASE+214)
-#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (V4L2_CID_MPEG_BASE+215)
-#define V4L2_CID_MPEG_VIDEO_HEADER_MODE (V4L2_CID_MPEG_BASE+216)
-enum v4l2_mpeg_video_header_mode {
- V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE = 0,
- V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME = 1,
-
-};
-#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (V4L2_CID_MPEG_BASE+217)
-#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (V4L2_CID_MPEG_BASE+218)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (V4L2_CID_MPEG_BASE+219)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (V4L2_CID_MPEG_BASE+220)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_MPEG_BASE+221)
-enum v4l2_mpeg_video_multi_slice_mode {
- V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE = 0,
- V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB = 1,
- V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222)
-#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223)
-#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224)
-#define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225)
-
-#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300)
-#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301)
-#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302)
-#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP (V4L2_CID_MPEG_BASE+303)
-#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP (V4L2_CID_MPEG_BASE+304)
-#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (V4L2_CID_MPEG_BASE+350)
-#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (V4L2_CID_MPEG_BASE+351)
-#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (V4L2_CID_MPEG_BASE+352)
-#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP (V4L2_CID_MPEG_BASE+353)
-#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP (V4L2_CID_MPEG_BASE+354)
-#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (V4L2_CID_MPEG_BASE+355)
-#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (V4L2_CID_MPEG_BASE+356)
-#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (V4L2_CID_MPEG_BASE+357)
-enum v4l2_mpeg_video_h264_entropy_mode {
- V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC = 0,
- V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (V4L2_CID_MPEG_BASE+358)
-#define V4L2_CID_MPEG_VIDEO_H264_LEVEL (V4L2_CID_MPEG_BASE+359)
-enum v4l2_mpeg_video_h264_level {
- V4L2_MPEG_VIDEO_H264_LEVEL_1_0 = 0,
- V4L2_MPEG_VIDEO_H264_LEVEL_1B = 1,
- V4L2_MPEG_VIDEO_H264_LEVEL_1_1 = 2,
- V4L2_MPEG_VIDEO_H264_LEVEL_1_2 = 3,
- V4L2_MPEG_VIDEO_H264_LEVEL_1_3 = 4,
- V4L2_MPEG_VIDEO_H264_LEVEL_2_0 = 5,
- V4L2_MPEG_VIDEO_H264_LEVEL_2_1 = 6,
- V4L2_MPEG_VIDEO_H264_LEVEL_2_2 = 7,
- V4L2_MPEG_VIDEO_H264_LEVEL_3_0 = 8,
- V4L2_MPEG_VIDEO_H264_LEVEL_3_1 = 9,
- V4L2_MPEG_VIDEO_H264_LEVEL_3_2 = 10,
- V4L2_MPEG_VIDEO_H264_LEVEL_4_0 = 11,
- V4L2_MPEG_VIDEO_H264_LEVEL_4_1 = 12,
- V4L2_MPEG_VIDEO_H264_LEVEL_4_2 = 13,
- V4L2_MPEG_VIDEO_H264_LEVEL_5_0 = 14,
- V4L2_MPEG_VIDEO_H264_LEVEL_5_1 = 15,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_MPEG_BASE+360)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_MPEG_BASE+361)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE+362)
-enum v4l2_mpeg_video_h264_loop_filter_mode {
- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED = 0,
- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED = 1,
- V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_PROFILE (V4L2_CID_MPEG_BASE+363)
-enum v4l2_mpeg_video_h264_profile {
- V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE = 0,
- V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE = 1,
- V4L2_MPEG_VIDEO_H264_PROFILE_MAIN = 2,
- V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED = 3,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH = 4,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10 = 5,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 = 6,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE = 7,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA = 8,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA = 9,
- V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA = 10,
- V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA = 11,
- V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE = 12,
- V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH = 13,
- V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA = 14,
- V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH = 15,
- V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH = 16,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_MPEG_BASE+364)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_MPEG_BASE+365)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (V4L2_CID_MPEG_BASE+366)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (V4L2_CID_MPEG_BASE+367)
-enum v4l2_mpeg_video_h264_vui_sar_idc {
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED = 0,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1 = 1,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11 = 2,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11 = 3,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11 = 4,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33 = 5,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11 = 6,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11 = 7,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11 = 8,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33 = 9,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11 = 10,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11 = 11,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33 = 12,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99 = 13,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3 = 14,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2 = 15,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 = 16,
- V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED = 17,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (V4L2_CID_MPEG_BASE+368)
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (V4L2_CID_MPEG_BASE+369)
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (V4L2_CID_MPEG_BASE+370)
-enum v4l2_mpeg_video_h264_sei_fp_arrangement_type {
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD = 0,
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN = 1,
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW = 2,
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE = 3,
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM = 4,
- V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL = 5,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO (V4L2_CID_MPEG_BASE+371)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (V4L2_CID_MPEG_BASE+372)
-enum v4l2_mpeg_video_h264_fmo_map_type {
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES = 0,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES = 1,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER = 2,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT = 3,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN = 4,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN = 5,
- V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT = 6,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (V4L2_CID_MPEG_BASE+373)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (V4L2_CID_MPEG_BASE+374)
-enum v4l2_mpeg_video_h264_fmo_change_dir {
- V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT = 0,
- V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (V4L2_CID_MPEG_BASE+375)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (V4L2_CID_MPEG_BASE+376)
-#define V4L2_CID_MPEG_VIDEO_H264_ASO (V4L2_CID_MPEG_BASE+377)
-#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (V4L2_CID_MPEG_BASE+378)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (V4L2_CID_MPEG_BASE+379)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (V4L2_CID_MPEG_BASE+380)
-enum v4l2_mpeg_video_h264_hierarchical_coding_type {
- V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B = 0,
- V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (V4L2_CID_MPEG_BASE+381)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (V4L2_CID_MPEG_BASE+403)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (V4L2_CID_MPEG_BASE+404)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (V4L2_CID_MPEG_BASE+405)
-enum v4l2_mpeg_video_mpeg4_level {
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_0 = 0,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B = 1,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_1 = 2,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_2 = 3,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_3 = 4,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B = 5,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_4 = 6,
- V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 = 7,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (V4L2_CID_MPEG_BASE+406)
-enum v4l2_mpeg_video_mpeg4_profile {
- V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE = 0,
- V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE = 1,
- V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE = 2,
- V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE = 3,
- V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY = 4,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407)
-
-/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
-#define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0)
-enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
- V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
- V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+1)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+2)
-enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
- V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF = 0,
- V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
- V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT = 2,
- V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE = 3,
- V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+3)
-enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
- V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF = 0,
- V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+4)
-enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
- V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
- V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+5)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+6)
-enum v4l2_mpeg_cx2341x_video_median_filter_type {
- V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF = 0,
- V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR = 1,
- V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT = 2,
- V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
- V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+7)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+8)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10)
-#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11)
-
-/* MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
-#define V4L2_CID_MPEG_MFC51_BASE (V4L2_CTRL_CLASS_MPEG | 0x1100)
-
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (V4L2_CID_MPEG_MFC51_BASE+0)
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_MFC51_BASE+1)
-#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_MFC51_BASE+2)
-enum v4l2_mpeg_mfc51_video_frame_skip_mode {
- V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED = 0,
- V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1,
- V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (V4L2_CID_MPEG_MFC51_BASE+3)
-enum v4l2_mpeg_mfc51_video_force_frame_type {
- V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED = 0,
- V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME = 1,
- V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED = 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING (V4L2_CID_MPEG_MFC51_BASE+4)
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (V4L2_CID_MPEG_MFC51_BASE+5)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (V4L2_CID_MPEG_MFC51_BASE+6)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (V4L2_CID_MPEG_MFC51_BASE+7)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (V4L2_CID_MPEG_MFC51_BASE+50)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (V4L2_CID_MPEG_MFC51_BASE+51)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (V4L2_CID_MPEG_MFC51_BASE+52)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_MPEG_MFC51_BASE+53)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_MPEG_MFC51_BASE+54)
-
-
-/* Camera class control IDs */
-
-#define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900)
-#define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1)
-
-#define V4L2_CID_EXPOSURE_AUTO (V4L2_CID_CAMERA_CLASS_BASE+1)
-enum v4l2_exposure_auto_type {
- V4L2_EXPOSURE_AUTO = 0,
- V4L2_EXPOSURE_MANUAL = 1,
- V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
- V4L2_EXPOSURE_APERTURE_PRIORITY = 3
-};
-#define V4L2_CID_EXPOSURE_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+2)
-#define V4L2_CID_EXPOSURE_AUTO_PRIORITY (V4L2_CID_CAMERA_CLASS_BASE+3)
-
-#define V4L2_CID_PAN_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+4)
-#define V4L2_CID_TILT_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+5)
-#define V4L2_CID_PAN_RESET (V4L2_CID_CAMERA_CLASS_BASE+6)
-#define V4L2_CID_TILT_RESET (V4L2_CID_CAMERA_CLASS_BASE+7)
-
-#define V4L2_CID_PAN_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+8)
-#define V4L2_CID_TILT_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+9)
-
-#define V4L2_CID_FOCUS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+10)
-#define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11)
-#define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12)
-
-#define V4L2_CID_ZOOM_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+13)
-#define V4L2_CID_ZOOM_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+14)
-#define V4L2_CID_ZOOM_CONTINUOUS (V4L2_CID_CAMERA_CLASS_BASE+15)
-
-#define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16)
-
-#define V4L2_CID_IRIS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+17)
-#define V4L2_CID_IRIS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+18)
-
-#define V4L2_CID_AUTO_EXPOSURE_BIAS (V4L2_CID_CAMERA_CLASS_BASE+19)
-
-#define V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE (V4L2_CID_CAMERA_CLASS_BASE+20)
-enum v4l2_auto_n_preset_white_balance {
- V4L2_WHITE_BALANCE_MANUAL = 0,
- V4L2_WHITE_BALANCE_AUTO = 1,
- V4L2_WHITE_BALANCE_INCANDESCENT = 2,
- V4L2_WHITE_BALANCE_FLUORESCENT = 3,
- V4L2_WHITE_BALANCE_FLUORESCENT_H = 4,
- V4L2_WHITE_BALANCE_HORIZON = 5,
- V4L2_WHITE_BALANCE_DAYLIGHT = 6,
- V4L2_WHITE_BALANCE_FLASH = 7,
- V4L2_WHITE_BALANCE_CLOUDY = 8,
- V4L2_WHITE_BALANCE_SHADE = 9,
-};
-
-#define V4L2_CID_WIDE_DYNAMIC_RANGE (V4L2_CID_CAMERA_CLASS_BASE+21)
-#define V4L2_CID_IMAGE_STABILIZATION (V4L2_CID_CAMERA_CLASS_BASE+22)
-
-#define V4L2_CID_ISO_SENSITIVITY (V4L2_CID_CAMERA_CLASS_BASE+23)
-#define V4L2_CID_ISO_SENSITIVITY_AUTO (V4L2_CID_CAMERA_CLASS_BASE+24)
-enum v4l2_iso_sensitivity_auto_type {
- V4L2_ISO_SENSITIVITY_MANUAL = 0,
- V4L2_ISO_SENSITIVITY_AUTO = 1,
-};
-
-#define V4L2_CID_EXPOSURE_METERING (V4L2_CID_CAMERA_CLASS_BASE+25)
-enum v4l2_exposure_metering {
- V4L2_EXPOSURE_METERING_AVERAGE = 0,
- V4L2_EXPOSURE_METERING_CENTER_WEIGHTED = 1,
- V4L2_EXPOSURE_METERING_SPOT = 2,
-};
-
-#define V4L2_CID_SCENE_MODE (V4L2_CID_CAMERA_CLASS_BASE+26)
-enum v4l2_scene_mode {
- V4L2_SCENE_MODE_NONE = 0,
- V4L2_SCENE_MODE_BACKLIGHT = 1,
- V4L2_SCENE_MODE_BEACH_SNOW = 2,
- V4L2_SCENE_MODE_CANDLE_LIGHT = 3,
- V4L2_SCENE_MODE_DAWN_DUSK = 4,
- V4L2_SCENE_MODE_FALL_COLORS = 5,
- V4L2_SCENE_MODE_FIREWORKS = 6,
- V4L2_SCENE_MODE_LANDSCAPE = 7,
- V4L2_SCENE_MODE_NIGHT = 8,
- V4L2_SCENE_MODE_PARTY_INDOOR = 9,
- V4L2_SCENE_MODE_PORTRAIT = 10,
- V4L2_SCENE_MODE_SPORTS = 11,
- V4L2_SCENE_MODE_SUNSET = 12,
- V4L2_SCENE_MODE_TEXT = 13,
-};
-
-#define V4L2_CID_3A_LOCK (V4L2_CID_CAMERA_CLASS_BASE+27)
-#define V4L2_LOCK_EXPOSURE (1 << 0)
-#define V4L2_LOCK_WHITE_BALANCE (1 << 1)
-#define V4L2_LOCK_FOCUS (1 << 2)
-
-#define V4L2_CID_AUTO_FOCUS_START (V4L2_CID_CAMERA_CLASS_BASE+28)
-#define V4L2_CID_AUTO_FOCUS_STOP (V4L2_CID_CAMERA_CLASS_BASE+29)
-#define V4L2_CID_AUTO_FOCUS_STATUS (V4L2_CID_CAMERA_CLASS_BASE+30)
-#define V4L2_AUTO_FOCUS_STATUS_IDLE (0 << 0)
-#define V4L2_AUTO_FOCUS_STATUS_BUSY (1 << 0)
-#define V4L2_AUTO_FOCUS_STATUS_REACHED (1 << 1)
-#define V4L2_AUTO_FOCUS_STATUS_FAILED (1 << 2)
-
-#define V4L2_CID_AUTO_FOCUS_RANGE (V4L2_CID_CAMERA_CLASS_BASE+31)
-enum v4l2_auto_focus_range {
- V4L2_AUTO_FOCUS_RANGE_AUTO = 0,
- V4L2_AUTO_FOCUS_RANGE_NORMAL = 1,
- V4L2_AUTO_FOCUS_RANGE_MACRO = 2,
- V4L2_AUTO_FOCUS_RANGE_INFINITY = 3,
-};
-
-
-/* FM Modulator class control IDs */
-
-#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
-#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1)
-
-#define V4L2_CID_RDS_TX_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 1)
-#define V4L2_CID_RDS_TX_PI (V4L2_CID_FM_TX_CLASS_BASE + 2)
-#define V4L2_CID_RDS_TX_PTY (V4L2_CID_FM_TX_CLASS_BASE + 3)
-#define V4L2_CID_RDS_TX_PS_NAME (V4L2_CID_FM_TX_CLASS_BASE + 5)
-#define V4L2_CID_RDS_TX_RADIO_TEXT (V4L2_CID_FM_TX_CLASS_BASE + 6)
-
-#define V4L2_CID_AUDIO_LIMITER_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 64)
-#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 65)
-#define V4L2_CID_AUDIO_LIMITER_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 66)
-
-#define V4L2_CID_AUDIO_COMPRESSION_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 80)
-#define V4L2_CID_AUDIO_COMPRESSION_GAIN (V4L2_CID_FM_TX_CLASS_BASE + 81)
-#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (V4L2_CID_FM_TX_CLASS_BASE + 82)
-#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (V4L2_CID_FM_TX_CLASS_BASE + 83)
-#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 84)
-
-#define V4L2_CID_PILOT_TONE_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 96)
-#define V4L2_CID_PILOT_TONE_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 97)
-#define V4L2_CID_PILOT_TONE_FREQUENCY (V4L2_CID_FM_TX_CLASS_BASE + 98)
-
-#define V4L2_CID_TUNE_PREEMPHASIS (V4L2_CID_FM_TX_CLASS_BASE + 112)
-enum v4l2_preemphasis {
- V4L2_PREEMPHASIS_DISABLED = 0,
- V4L2_PREEMPHASIS_50_uS = 1,
- V4L2_PREEMPHASIS_75_uS = 2,
-};
-#define V4L2_CID_TUNE_POWER_LEVEL (V4L2_CID_FM_TX_CLASS_BASE + 113)
-#define V4L2_CID_TUNE_ANTENNA_CAPACITOR (V4L2_CID_FM_TX_CLASS_BASE + 114)
-
-
-/* Flash and privacy (indicator) light controls */
-
-#define V4L2_CID_FLASH_CLASS_BASE (V4L2_CTRL_CLASS_FLASH | 0x900)
-#define V4L2_CID_FLASH_CLASS (V4L2_CTRL_CLASS_FLASH | 1)
-
-#define V4L2_CID_FLASH_LED_MODE (V4L2_CID_FLASH_CLASS_BASE + 1)
-enum v4l2_flash_led_mode {
- V4L2_FLASH_LED_MODE_NONE,
- V4L2_FLASH_LED_MODE_FLASH,
- V4L2_FLASH_LED_MODE_TORCH,
-};
-
-#define V4L2_CID_FLASH_STROBE_SOURCE (V4L2_CID_FLASH_CLASS_BASE + 2)
-enum v4l2_flash_strobe_source {
- V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
- V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
-};
-
-#define V4L2_CID_FLASH_STROBE (V4L2_CID_FLASH_CLASS_BASE + 3)
-#define V4L2_CID_FLASH_STROBE_STOP (V4L2_CID_FLASH_CLASS_BASE + 4)
-#define V4L2_CID_FLASH_STROBE_STATUS (V4L2_CID_FLASH_CLASS_BASE + 5)
-
-#define V4L2_CID_FLASH_TIMEOUT (V4L2_CID_FLASH_CLASS_BASE + 6)
-#define V4L2_CID_FLASH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 7)
-#define V4L2_CID_FLASH_TORCH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 8)
-#define V4L2_CID_FLASH_INDICATOR_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 9)
-
-#define V4L2_CID_FLASH_FAULT (V4L2_CID_FLASH_CLASS_BASE + 10)
-#define V4L2_FLASH_FAULT_OVER_VOLTAGE (1 << 0)
-#define V4L2_FLASH_FAULT_TIMEOUT (1 << 1)
-#define V4L2_FLASH_FAULT_OVER_TEMPERATURE (1 << 2)
-#define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3)
-#define V4L2_FLASH_FAULT_OVER_CURRENT (1 << 4)
-#define V4L2_FLASH_FAULT_INDICATOR (1 << 5)
-
-#define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11)
-#define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12)
-
-
-/* JPEG-class control IDs */
-
-#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900)
-#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1)
-
-#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1)
-enum v4l2_jpeg_chroma_subsampling {
- V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0,
- V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1,
- V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2,
- V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3,
- V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4,
- V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5,
-};
-#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2)
-#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3)
-
-#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4)
-#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0)
-#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1)
-#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16)
-#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17)
-#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18)
-
-/* Image source controls */
-#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900)
-#define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1)
-
-#define V4L2_CID_VBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1)
-#define V4L2_CID_HBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
-#define V4L2_CID_ANALOGUE_GAIN (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
-
-
-/* Image processing controls */
-
-#define V4L2_CID_IMAGE_PROC_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_PROC | 0x900)
-#define V4L2_CID_IMAGE_PROC_CLASS (V4L2_CTRL_CLASS_IMAGE_PROC | 1)
-
-#define V4L2_CID_LINK_FREQ (V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
-#define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
-#define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
-
-#endif
diff --git a/include/linux/v4l2-dv-timings.h b/include/linux/v4l2-dv-timings.h
deleted file mode 100644
index 9ef8172..0000000
--- a/include/linux/v4l2-dv-timings.h
+++ /dev/null
@@ -1,816 +0,0 @@
-/*
- * V4L2 DV timings header.
- *
- * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _V4L2_DV_TIMINGS_H
-#define _V4L2_DV_TIMINGS_H
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ < 6))
-/* Sadly gcc versions older than 4.6 have a bug in how they initialize
- anonymous unions where they require additional curly brackets.
- This violates the C1x standard. This workaround adds the curly brackets
- if needed. */
-#define V4L2_INIT_BT_TIMINGS(_width, args...) \
- { .bt = { _width , ## args } }
-#else
-#define V4L2_INIT_BT_TIMINGS(_width, args...) \
- .bt = { _width , ## args }
-#endif
-
-/* CEA-861-E timings (i.e. standard HDTV timings) */
-
-#define V4L2_DV_BT_CEA_640X480P59_94 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
- 25175000, 16, 96, 48, 10, 2, 33, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_720X480P59_94 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \
- 27000000, 16, 62, 60, 9, 6, 30, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_720X576P50 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \
- 27000000, 12, 64, 68, 5, 5, 39, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P24 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 59400000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
- V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P25 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 2420, 40, 220, 5, 5, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P30 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P50 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 440, 40, 220, 5, 5, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 110, 40, 220, 5, 5, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P24 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 638, 44, 148, 4, 5, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P25 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P30 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080I50 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 528, 44, 148, 2, 5, 15, 2, 5, 16, \
- V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P50 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 148500000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080I60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 74250000, 88, 44, 148, 2, 5, 15, 2, 5, 16, \
- V4L2_DV_BT_STD_CEA861, \
- V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_HALF_LINE) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 148500000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
- V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-
-/* VESA Discrete Monitor Timings as per version 1.0, revision 12 */
-
-#define V4L2_DV_BT_DMT_640X350P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 350, 0, V4L2_DV_HSYNC_POS_POL, \
- 31500000, 32, 64, 96, 32, 3, 60, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X400P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 400, 0, V4L2_DV_VSYNC_POS_POL, \
- 31500000, 32, 64, 96, 1, 3, 41, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_720X400P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(720, 400, 0, V4L2_DV_VSYNC_POS_POL, \
- 35500000, 36, 72, 108, 1, 3, 42, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* VGA resolutions */
-#define V4L2_DV_BT_DMT_640X480P60 V4L2_DV_BT_CEA_640X480P59_94
-
-#define V4L2_DV_BT_DMT_640X480P72 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
- 31500000, 24, 40, 128, 9, 3, 28, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X480P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
- 31500000, 16, 64, 120, 1, 3, 16, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X480P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
- 36000000, 56, 56, 80, 1, 3, 25, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* SVGA resolutions */
-#define V4L2_DV_BT_DMT_800X600P56 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 36000000, 24, 72, 128, 1, 2, 22, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 40000000, 40, 128, 88, 1, 4, 23, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P72 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 50000000, 56, 120, 64, 37, 6, 23, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 49500000, 16, 80, 160, 1, 3, 21, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 56250000, 32, 64, 152, 1, 3, 27, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(800, 600, 0, V4L2_DV_HSYNC_POS_POL, \
- 73250000, 48, 32, 80, 3, 4, 29, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_848X480P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(848, 480, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 33750000, 16, 112, 112, 6, 8, 23, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768I43 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 1, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 44900000, 8, 176, 56, 0, 4, 20, 0, 4, 21, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* XGA resolutions */
-#define V4L2_DV_BT_DMT_1024X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
- 65000000, 24, 136, 160, 3, 6, 29, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P70 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
- 75000000, 24, 136, 144, 3, 6, 29, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 78750000, 16, 96, 176, 1, 3, 28, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 94500000, 48, 96, 208, 1, 3, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1024, 768, 0, V4L2_DV_HSYNC_POS_POL, \
- 115500000, 48, 32, 80, 3, 4, 38, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* XGA+ resolution */
-#define V4L2_DV_BT_DMT_1152X864P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1152, 864, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 108000000, 64, 128, 256, 1, 3, 32, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X720P60 V4L2_DV_BT_CEA_1280X720P60
-
-/* WXGA resolutions */
-#define V4L2_DV_BT_DMT_1280X768P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
- 68250000, 48, 32, 80, 3, 7, 12, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
- 79500000, 64, 128, 192, 3, 7, 20, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
- 102250000, 80, 128, 208, 3, 7, 27, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
- 117500000, 80, 136, 216, 3, 7, 31, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
- 140250000, 48, 32, 80, 3, 7, 35, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
- 71000000, 48, 32, 80, 3, 6, 14, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
- 83500000, 72, 128, 200, 3, 6, 22, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
- 106500000, 80, 128, 208, 3, 6, 29, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
- 122500000, 80, 136, 216, 3, 6, 34, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
- 146250000, 48, 32, 80, 3, 6, 38, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 108000000, 96, 112, 312, 1, 3, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 148500000, 64, 160, 224, 1, 3, 47, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 960, 0, V4L2_DV_HSYNC_POS_POL, \
- 175500000, 48, 32, 80, 3, 4, 50, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* SXGA resolutions */
-#define V4L2_DV_BT_DMT_1280X1024P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 108000000, 48, 112, 248, 1, 3, 38, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 135000000, 16, 144, 248, 1, 3, 38, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 157500000, 64, 160, 224, 1, 3, 44, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1280, 1024, 0, V4L2_DV_HSYNC_POS_POL, \
- 187250000, 48, 32, 80, 3, 7, 50, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1360X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1360, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 85500000, 64, 112, 256, 3, 6, 18, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1360X768P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1360, 768, 0, V4L2_DV_HSYNC_POS_POL, \
- 148250000, 48, 32, 80, 3, 5, 37, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 72000000, 14, 56, 64, 1, 3, 28, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* SXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1400X1050P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
- 101000000, 48, 32, 80, 3, 4, 23, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 121750000, 88, 144, 232, 3, 4, 32, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 156000000, 104, 144, 248, 3, 4, 42, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 179500000, 104, 152, 256, 3, 4, 48, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
- 208000000, 48, 32, 80, 3, 4, 55, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1440X900P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
- 88750000, 48, 32, 80, 3, 6, 17, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
- 106500000, 80, 152, 232, 3, 6, 25, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
- 136750000, 96, 152, 248, 3, 6, 33, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
- 157000000, 104, 152, 256, 3, 6, 39, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
- 182750000, 48, 32, 80, 3, 6, 44, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1600X900P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 900, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 108000000, 24, 80, 96, 1, 3, 96, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* UXGA resolutions */
-#define V4L2_DV_BT_DMT_1600X1200P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 162000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P65 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 175500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P70 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 189000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 202500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 229500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1600, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
- 268250000, 48, 32, 80, 3, 4, 64, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WSXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1680X1050P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
- 119000000, 48, 32, 80, 3, 6, 21, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 146250000, 104, 176, 280, 3, 6, 30, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 187000000, 120, 176, 296, 3, 6, 40, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
- 214750000, 128, 176, 304, 3, 6, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
- 245500000, 48, 32, 80, 3, 6, 53, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
- 204750000, 128, 200, 328, 1, 3, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
- 261000000, 96, 216, 352, 1, 3, 69, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_HSYNC_POS_POL, \
- 333250000, 48, 32, 80, 3, 4, 72, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
- 218250000, 96, 224, 352, 1, 3, 43, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
- 288000000, 128, 224, 352, 1, 3, 104, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_HSYNC_POS_POL, \
- 356500000, 48, 32, 80, 3, 4, 75, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1080P60 V4L2_DV_BT_CEA_1920X1080P60
-
-/* WUXGA resolutions */
-#define V4L2_DV_BT_DMT_1920X1200P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
- 154000000, 48, 32, 80, 3, 6, 26, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
- 193250000, 136, 200, 336, 3, 6, 36, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
- 245250000, 136, 208, 344, 3, 6, 46, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
- 281250000, 144, 208, 352, 3, 6, 53, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
- 317000000, 48, 32, 80, 3, 6, 62, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
- 234000000, 128, 208, 344, 1, 3, 56, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
- 297000000, 144, 224, 352, 1, 3, 56, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_HSYNC_POS_POL, \
- 380500000, 48, 32, 80, 3, 4, 78, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_2048X1152P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2048, 1152, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 162000000, 26, 80, 96, 1, 3, 44, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WQXGA resolutions */
-#define V4L2_DV_BT_DMT_2560X1600P60_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
- 268500000, 48, 32, 80, 3, 6, 37, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
- 348500000, 192, 280, 472, 3, 6, 49, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P75 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
- 443250000, 208, 280, 488, 3, 6, 63, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P85 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
- 505250000, 208, 280, 488, 3, 6, 73, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P120_RB { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
- 552750000, 48, 32, 80, 3, 6, 85, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
- V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#endif
diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h
deleted file mode 100644
index 7d64e0e..0000000
--- a/include/linux/v4l2-mediabus.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Media Bus API header
- *
- * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_V4L2_MEDIABUS_H
-#define __LINUX_V4L2_MEDIABUS_H
-
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/*
- * These pixel codes uniquely identify data formats on the media bus. Mostly
- * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is
- * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the
- * data format is fixed. Additionally, "2X8" means that one pixel is transferred
- * in two 8-bit samples, "BE" or "LE" specify in which order those samples are
- * transferred over the bus: "LE" means that the least significant bits are
- * transferred first, "BE" means that the most significant bits are transferred
- * first, and "PADHI" and "PADLO" define which bits - low or high, in the
- * incomplete high byte, are filled with padding bits.
- *
- * The pixel codes are grouped by type, bus_width, bits per component, samples
- * per pixel and order of subsamples. Numerical values are sorted using generic
- * numerical sort order (8 thus comes before 10).
- *
- * As their value can't change when a new pixel code is inserted in the
- * enumeration, the pixel codes are explicitly given a numerical value. The next
- * free values for each category are listed below, update them when inserting
- * new pixel codes.
- */
-enum v4l2_mbus_pixelcode {
- V4L2_MBUS_FMT_FIXED = 0x0001,
-
- /* RGB - next is 0x1009 */
- V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
- V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
- V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
- V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004,
- V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005,
- V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006,
- V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
- V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
-
- /* YUV (including grey) - next is 0x2014 */
- V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
- V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
- V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
- V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004,
- V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005,
- V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006,
- V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007,
- V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008,
- V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009,
- V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
- V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
- V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
- V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
- V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
- V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
- V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
- V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012,
- V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
- V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
-
- /* Bayer - next is 0x3015 */
- V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
- V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
- V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
- V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
- V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
- V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
- V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
- V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d,
- V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003,
- V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004,
- V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005,
- V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006,
- V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007,
- V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e,
- V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a,
- V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f,
- V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008,
- V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010,
- V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011,
- V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012,
-
- /* JPEG compressed formats - next is 0x4002 */
- V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
-
- /* Vendor specific formats - next is 0x5002 */
-
- /* S5C73M3 sensor specific interleaved UYVY and JPEG */
- V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001,
-};
-
-/**
- * struct v4l2_mbus_framefmt - frame format on the media bus
- * @width: frame width
- * @height: frame height
- * @code: data format code (from enum v4l2_mbus_pixelcode)
- * @field: used interlacing type (from enum v4l2_field)
- * @colorspace: colorspace of the data (from enum v4l2_colorspace)
- */
-struct v4l2_mbus_framefmt {
- __u32 width;
- __u32 height;
- __u32 code;
- __u32 field;
- __u32 colorspace;
- __u32 reserved[7];
-};
-
-#endif
diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h
deleted file mode 100644
index a33c4da..0000000
--- a/include/linux/v4l2-subdev.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * V4L2 subdev userspace API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- * Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_V4L2_SUBDEV_H
-#define __LINUX_V4L2_SUBDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-mediabus.h>
-
-/**
- * enum v4l2_subdev_format_whence - Media bus format type
- * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only
- * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device
- */
-enum v4l2_subdev_format_whence {
- V4L2_SUBDEV_FORMAT_TRY = 0,
- V4L2_SUBDEV_FORMAT_ACTIVE = 1,
-};
-
-/**
- * struct v4l2_subdev_format - Pad-level media bus format
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @format: media bus format (format code and frame size)
- */
-struct v4l2_subdev_format {
- __u32 which;
- __u32 pad;
- struct v4l2_mbus_framefmt format;
- __u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_crop - Pad-level crop settings
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @rect: pad crop rectangle boundaries
- */
-struct v4l2_subdev_crop {
- __u32 which;
- __u32 pad;
- struct v4l2_rect rect;
- __u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_mbus_code_enum {
- __u32 pad;
- __u32 index;
- __u32 code;
- __u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_size_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_frame_size_enum {
- __u32 index;
- __u32 pad;
- __u32 code;
- __u32 min_width;
- __u32 max_width;
- __u32 min_height;
- __u32 max_height;
- __u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval - Pad-level frame rate
- * @pad: pad number, as reported by the media API
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval {
- __u32 pad;
- struct v4l2_fract interval;
- __u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration
- * @pad: pad number, as reported by the media API
- * @index: frame interval index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- * @width: frame width in pixels
- * @height: frame height in pixels
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval_enum {
- __u32 index;
- __u32 pad;
- __u32 code;
- __u32 width;
- __u32 height;
- struct v4l2_fract interval;
- __u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_selection - selection info
- *
- * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY
- * @pad: pad number, as reported by the media API
- * @target: Selection target, used to choose one of possible rectangles,
- * defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r: coordinates of the selection window
- * @reserved: for future use, set to zero for now
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_subdev_selection {
- __u32 which;
- __u32 pad;
- __u32 target;
- __u32 flags;
- struct v4l2_rect r;
- __u32 reserved[8];
-};
-
-struct v4l2_subdev_edid {
- __u32 pad;
- __u32 start_block;
- __u32 blocks;
- __u32 reserved[5];
- __u8 __user *edid;
-};
-
-#define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
- _IOWR('V', 21, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \
- _IOWR('V', 22, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \
- _IOWR('V', 2, struct v4l2_subdev_mbus_code_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
- _IOWR('V', 74, struct v4l2_subdev_frame_size_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
- _IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
-#define VIDIOC_SUBDEV_G_CROP _IOWR('V', 59, struct v4l2_subdev_crop)
-#define VIDIOC_SUBDEV_S_CROP _IOWR('V', 60, struct v4l2_subdev_crop)
-#define VIDIOC_SUBDEV_G_SELECTION \
- _IOWR('V', 61, struct v4l2_subdev_selection)
-#define VIDIOC_SUBDEV_S_SELECTION \
- _IOWR('V', 62, struct v4l2_subdev_selection)
-#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_subdev_edid)
-#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_subdev_edid)
-
-#endif
diff --git a/include/linux/veth.h b/include/linux/veth.h
deleted file mode 100644
index 3354c1e..0000000
--- a/include/linux/veth.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __NET_VETH_H_
-#define __NET_VETH_H_
-
-enum {
- VETH_INFO_UNSPEC,
- VETH_INFO_PEER,
-
- __VETH_INFO_MAX
-#define VETH_INFO_MAX (__VETH_INFO_MAX - 1)
-};
-
-#endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0a4f180..ab9e862 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -11,15 +11,10 @@
#ifndef VFIO_H
#define VFIO_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define VFIO_API_VERSION 0
-
-#ifdef __KERNEL__ /* Internal VFIO-core/bus driver API */
#include <linux/iommu.h>
#include <linux/mm.h>
+#include <uapi/linux/vfio.h>
/**
* struct vfio_device_ops - VFIO bus driver device callbacks
@@ -92,354 +87,4 @@ extern void vfio_unregister_iommu_driver(
TYPE tmp; \
offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); }) \
-#endif /* __KERNEL__ */
-
-/* Kernel & User level defines for VFIO IOCTLs. */
-
-/* Extensions */
-
-#define VFIO_TYPE1_IOMMU 1
-
-/*
- * The IOCTL interface is designed for extensibility by embedding the
- * structure length (argsz) and flags into structures passed between
- * kernel and userspace. We therefore use the _IO() macro for these
- * defines to avoid implicitly embedding a size into the ioctl request.
- * As structure fields are added, argsz will increase to match and flag
- * bits will be defined to indicate additional fields with valid data.
- * It's *always* the caller's responsibility to indicate the size of
- * the structure passed by setting argsz appropriately.
- */
-
-#define VFIO_TYPE (';')
-#define VFIO_BASE 100
-
-/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
-
-/**
- * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
- *
- * Report the version of the VFIO API. This allows us to bump the entire
- * API version should we later need to add or change features in incompatible
- * ways.
- * Return: VFIO_API_VERSION
- * Availability: Always
- */
-#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
-
-/**
- * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
- *
- * Check whether an extension is supported.
- * Return: 0 if not supported, 1 (or some other positive integer) if supported.
- * Availability: Always
- */
-#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
-
-/**
- * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
- *
- * Set the iommu to the given type. The type must be supported by an
- * iommu driver as verified by calling CHECK_EXTENSION using the same
- * type. A group must be set to this file descriptor before this
- * ioctl is available. The IOMMU interfaces enabled by this call are
- * specific to the value set.
- * Return: 0 on success, -errno on failure
- * Availability: When VFIO group attached
- */
-#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
-
-/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
-
-/**
- * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
- * struct vfio_group_status)
- *
- * Retrieve information about the group. Fills in provided
- * struct vfio_group_info. Caller sets argsz.
- * Return: 0 on succes, -errno on failure.
- * Availability: Always
- */
-struct vfio_group_status {
- __u32 argsz;
- __u32 flags;
-#define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
-#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
-};
-#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
-
-/**
- * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
- *
- * Set the container for the VFIO group to the open VFIO file
- * descriptor provided. Groups may only belong to a single
- * container. Containers may, at their discretion, support multiple
- * groups. Only when a container is set are all of the interfaces
- * of the VFIO file descriptor and the VFIO group file descriptor
- * available to the user.
- * Return: 0 on success, -errno on failure.
- * Availability: Always
- */
-#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
-
-/**
- * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
- *
- * Remove the group from the attached container. This is the
- * opposite of the SET_CONTAINER call and returns the group to
- * an initial state. All device file descriptors must be released
- * prior to calling this interface. When removing the last group
- * from a container, the IOMMU will be disabled and all state lost,
- * effectively also returning the VFIO file descriptor to an initial
- * state.
- * Return: 0 on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
-
-/**
- * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
- *
- * Return a new file descriptor for the device object described by
- * the provided string. The string should match a device listed in
- * the devices subdirectory of the IOMMU group sysfs entry. The
- * group containing the device must already be added to this context.
- * Return: new file descriptor on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
-
-/* --------------- IOCTLs for DEVICE file descriptors --------------- */
-
-/**
- * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
- * struct vfio_device_info)
- *
- * Retrieve information about the device. Fills in provided
- * struct vfio_device_info. Caller sets argsz.
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_device_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
-#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
- __u32 num_regions; /* Max region index + 1 */
- __u32 num_irqs; /* Max IRQ index + 1 */
-};
-#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
-
-/**
- * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
- * struct vfio_region_info)
- *
- * Retrieve information about a device region. Caller provides
- * struct vfio_region_info with index value set. Caller sets argsz.
- * Implementation of region mapping is bus driver specific. This is
- * intended to describe MMIO, I/O port, as well as bus specific
- * regions (ex. PCI config space). Zero sized regions may be used
- * to describe unimplemented regions (ex. unimplemented PCI BARs).
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_region_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
-#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
-#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
- __u32 index; /* Region index */
- __u32 resv; /* Reserved for alignment */
- __u64 size; /* Region size (bytes) */
- __u64 offset; /* Region offset from start of device fd */
-};
-#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
-
-/**
- * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
- * struct vfio_irq_info)
- *
- * Retrieve information about a device IRQ. Caller provides
- * struct vfio_irq_info with index value set. Caller sets argsz.
- * Implementation of IRQ mapping is bus driver specific. Indexes
- * using multiple IRQs are primarily intended to support MSI-like
- * interrupt blocks. Zero count irq blocks may be used to describe
- * unimplemented interrupt types.
- *
- * The EVENTFD flag indicates the interrupt index supports eventfd based
- * signaling.
- *
- * The MASKABLE flags indicates the index supports MASK and UNMASK
- * actions described below.
- *
- * AUTOMASKED indicates that after signaling, the interrupt line is
- * automatically masked by VFIO and the user needs to unmask the line
- * to receive new interrupts. This is primarily intended to distinguish
- * level triggered interrupts.
- *
- * The NORESIZE flag indicates that the interrupt lines within the index
- * are setup as a set and new subindexes cannot be enabled without first
- * disabling the entire index. This is used for interrupts like PCI MSI
- * and MSI-X where the driver may only use a subset of the available
- * indexes, but VFIO needs to enable a specific number of vectors
- * upfront. In the case of MSI-X, where the user can enable MSI-X and
- * then add and unmask vectors, it's up to userspace to make the decision
- * whether to allocate the maximum supported number of vectors or tear
- * down setup and incrementally increase the vectors as each is enabled.
- */
-struct vfio_irq_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IRQ_INFO_EVENTFD (1 << 0)
-#define VFIO_IRQ_INFO_MASKABLE (1 << 1)
-#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
-#define VFIO_IRQ_INFO_NORESIZE (1 << 3)
- __u32 index; /* IRQ index */
- __u32 count; /* Number of IRQs within this index */
-};
-#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
-
-/**
- * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
- *
- * Set signaling, masking, and unmasking of interrupts. Caller provides
- * struct vfio_irq_set with all fields set. 'start' and 'count' indicate
- * the range of subindexes being specified.
- *
- * The DATA flags specify the type of data provided. If DATA_NONE, the
- * operation performs the specified action immediately on the specified
- * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
- * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
- *
- * DATA_BOOL allows sparse support for the same on arrays of interrupts.
- * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
- * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
- * data = {1,0,1}
- *
- * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
- * A value of -1 can be used to either de-assign interrupts if already
- * assigned or skip un-assigned interrupts. For example, to set an eventfd
- * to be trigger for interrupts [0,0] and [0,2]:
- * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
- * data = {fd1, -1, fd2}
- * If index [0,1] is previously set, two count = 1 ioctls calls would be
- * required to set [0,0] and [0,2] without changing [0,1].
- *
- * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
- * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
- * from userspace (ie. simulate hardware triggering).
- *
- * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
- * enables the interrupt index for the device. Individual subindex interrupts
- * can be disabled using the -1 value for DATA_EVENTFD or the index can be
- * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
- *
- * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
- * ACTION_TRIGGER specifies kernel->user signaling.
- */
-struct vfio_irq_set {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
-#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
-#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
-#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
-#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
-#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
- __u32 index;
- __u32 start;
- __u32 count;
- __u8 data[];
-};
-#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
-
-#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
- VFIO_IRQ_SET_DATA_BOOL | \
- VFIO_IRQ_SET_DATA_EVENTFD)
-#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
- VFIO_IRQ_SET_ACTION_UNMASK | \
- VFIO_IRQ_SET_ACTION_TRIGGER)
-/**
- * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
- *
- * Reset a device.
- */
-#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
-
-/*
- * The VFIO-PCI bus driver makes use of the following fixed region and
- * IRQ index mapping. Unimplemented regions return a size of zero.
- * Unimplemented IRQ types return a count of zero.
- */
-
-enum {
- VFIO_PCI_BAR0_REGION_INDEX,
- VFIO_PCI_BAR1_REGION_INDEX,
- VFIO_PCI_BAR2_REGION_INDEX,
- VFIO_PCI_BAR3_REGION_INDEX,
- VFIO_PCI_BAR4_REGION_INDEX,
- VFIO_PCI_BAR5_REGION_INDEX,
- VFIO_PCI_ROM_REGION_INDEX,
- VFIO_PCI_CONFIG_REGION_INDEX,
- VFIO_PCI_NUM_REGIONS
-};
-
-enum {
- VFIO_PCI_INTX_IRQ_INDEX,
- VFIO_PCI_MSI_IRQ_INDEX,
- VFIO_PCI_MSIX_IRQ_INDEX,
- VFIO_PCI_NUM_IRQS
-};
-
-/* -------- API for Type1 VFIO IOMMU -------- */
-
-/**
- * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
- *
- * Retrieve information about the IOMMU object. Fills in provided
- * struct vfio_iommu_info. Caller sets argsz.
- *
- * XXX Should we do these by CHECK_EXTENSION too?
- */
-struct vfio_iommu_type1_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
- __u64 iova_pgsizes; /* Bitmap of supported page sizes */
-};
-
-#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
-
-/**
- * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
- *
- * Map process virtual addresses to IO virtual addresses using the
- * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
- */
-struct vfio_iommu_type1_dma_map {
- __u32 argsz;
- __u32 flags;
-#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
-#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
- __u64 vaddr; /* Process virtual address */
- __u64 iova; /* IO virtual address */
- __u64 size; /* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
-
-/**
- * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
- *
- * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
- * Caller sets argsz.
- */
-struct vfio_iommu_type1_dma_unmap {
- __u32 argsz;
- __u32 flags;
- __u64 iova; /* IO virtual address */
- __u64 size; /* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-
#endif /* VFIO_H */
diff --git a/include/linux/vhost.h b/include/linux/vhost.h
deleted file mode 100644
index e847f1e..0000000
--- a/include/linux/vhost.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_VHOST_H
-#define _LINUX_VHOST_H
-/* Userspace interface for in-kernel virtio accelerators. */
-
-/* vhost is used to reduce the number of system calls involved in virtio.
- *
- * Existing virtio net code is used in the guest without modification.
- *
- * This header includes interface used by userspace hypervisor for
- * device configuration.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
- unsigned int index;
- unsigned int num;
-};
-
-struct vhost_vring_file {
- unsigned int index;
- int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
- unsigned int index;
- /* Option flags. */
- unsigned int flags;
- /* Flag values: */
- /* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
- /* Start of array of descriptors (virtually contiguous) */
- __u64 desc_user_addr;
- /* Used structure address. Must be 32 bit aligned */
- __u64 used_user_addr;
- /* Available structure address. Must be 16 bit aligned */
- __u64 avail_user_addr;
- /* Logging support. */
- /* Log writes to used structure, at offset calculated from specified
- * address. Address must be 32 bit aligned. */
- __u64 log_guest_addr;
-};
-
-struct vhost_memory_region {
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
- __u64 userspace_addr;
- __u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
- __u32 nregions;
- __u32 padding;
- struct vhost_memory_region regions[0];
-};
-
-/* ioctls */
-
-#define VHOST_VIRTIO 0xAF
-
-/* Features bitmask for forward compatibility. Transport bits are used for
- * vhost specific features. */
-#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
-#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
-
-/* Set current process as the (exclusive) owner of this file descriptor. This
- * must be called before any other vhost command. Further calls to
- * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
-#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
-/* Give up ownership, and reset the device to default values.
- * Allows subsequent call to VHOST_OWNER_SET to succeed. */
-#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
-
-/* Set up/modify memory layout */
-#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
-
-/* Write logging setup. */
-/* Memory writes can optionally be logged by setting bit at an offset
- * (calculated from the physical address) from specified log base.
- * The bit is set using an atomic 32 bit operation. */
-/* Set base address for logging. */
-#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
-/* Specify an eventfd file descriptor to signal on log write. */
-#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
-
-/* Ring setup. */
-/* Set number of descriptors in ring. This parameter can not
- * be modified while ring is running (bound to a device). */
-#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
-/* Set addresses for the ring. */
-#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
-/* Base value where queue looks for available descriptors */
-#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-/* Get accessor: reads index, writes value in num */
-#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-
-/* The following ioctls use eventfd file descriptors to signal and poll
- * for events. */
-
-/* Set eventfd to poll for added buffers */
-#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
-/* Set eventfd to signal when buffers have beed used */
-#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
-/* Set eventfd to signal an error */
-#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
-
-/* VHOST_NET specific defines */
-
-/* Attach virtio net ring to a raw socket, or tap device.
- * The socket must be already bound to an ethernet device, this device will be
- * used for transmit. Pass fd -1 to unbind from the socket and the transmit
- * device. This can be used to stop the ring (e.g. for migration). */
-#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
-
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-
-#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 873adbe..73ea2fb 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -56,1945 +56,7 @@
#ifndef __LINUX_VIDEODEV2_H
#define __LINUX_VIDEODEV2_H
-#ifdef __KERNEL__
#include <linux/time.h> /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-controls.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME 32
-#define VIDEO_MAX_PLANES 8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
- They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE 1 /* Can capture */
-#define VID_TYPE_TUNER 2 /* Can tune */
-#define VID_TYPE_TELETEXT 4 /* Does teletext */
-#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */
-#define VID_TYPE_CLIPPING 32 /* Can clip */
-#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */
-#define VID_TYPE_SCALES 128 /* Scalable */
-#define VID_TYPE_MONOCHROME 256 /* Monochrome only */
-#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */
-#endif
-
-/*
- * M I S C E L L A N E O U S
- */
-
-/* Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
- ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- * E N U M S
- */
-enum v4l2_field {
- V4L2_FIELD_ANY = 0, /* driver can choose from none,
- top, bottom, interlaced
- depending on whatever it thinks
- is approximate ... */
- V4L2_FIELD_NONE = 1, /* this device has no fields ... */
- V4L2_FIELD_TOP = 2, /* top field only */
- V4L2_FIELD_BOTTOM = 3, /* bottom field only */
- V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */
- V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one
- buffer, top-bottom order */
- V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */
- V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into
- separate buffers */
- V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
- first and the top field is
- transmitted first */
- V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
- first and the bottom field is
- transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field) \
- ((field) == V4L2_FIELD_TOP ||\
- (field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field) \
- ((field) == V4L2_FIELD_BOTTOM ||\
- (field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field) \
- ((field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
- V4L2_BUF_TYPE_VIDEO_CAPTURE = 1,
- V4L2_BUF_TYPE_VIDEO_OUTPUT = 2,
- V4L2_BUF_TYPE_VIDEO_OVERLAY = 3,
- V4L2_BUF_TYPE_VBI_CAPTURE = 4,
- V4L2_BUF_TYPE_VBI_OUTPUT = 5,
- V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6,
- V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7,
-#if 1
- /* Experimental */
- V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
- V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
- V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10,
- /* Deprecated, do not use */
- V4L2_BUF_TYPE_PRIVATE = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type) \
- ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type) \
- ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \
- || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \
- || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \
- || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
- V4L2_TUNER_RADIO = 1,
- V4L2_TUNER_ANALOG_TV = 2,
- V4L2_TUNER_DIGITAL_TV = 3,
-};
-
-enum v4l2_memory {
- V4L2_MEMORY_MMAP = 1,
- V4L2_MEMORY_USERPTR = 2,
- V4L2_MEMORY_OVERLAY = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
- /* ITU-R 601 -- broadcast NTSC/PAL */
- V4L2_COLORSPACE_SMPTE170M = 1,
-
- /* 1125-Line (US) HDTV */
- V4L2_COLORSPACE_SMPTE240M = 2,
-
- /* HD and modern captures. */
- V4L2_COLORSPACE_REC709 = 3,
-
- /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
- V4L2_COLORSPACE_BT878 = 4,
-
- /* These should be useful. Assume 601 extents. */
- V4L2_COLORSPACE_470_SYSTEM_M = 5,
- V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
- /* I know there will be cameras that send this. So, this is
- * unspecified chromaticities and full 0-255 on each of the
- * Y'CbCr components
- */
- V4L2_COLORSPACE_JPEG = 7,
-
- /* For RGB colourspaces, this is probably a good start. */
- V4L2_COLORSPACE_SRGB = 8,
-};
-
-enum v4l2_priority {
- V4L2_PRIORITY_UNSET = 0, /* not initialized */
- V4L2_PRIORITY_BACKGROUND = 1,
- V4L2_PRIORITY_INTERACTIVE = 2,
- V4L2_PRIORITY_RECORD = 3,
- V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
- __s32 left;
- __s32 top;
- __s32 width;
- __s32 height;
-};
-
-struct v4l2_fract {
- __u32 numerator;
- __u32 denominator;
-};
-
-/**
- * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
- *
- * @driver: name of the driver module (e.g. "bttv")
- * @card: name of the card (e.g. "Hauppauge WinTV")
- * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
- * @version: KERNEL_VERSION
- * @capabilities: capabilities of the physical device as a whole
- * @device_caps: capabilities accessed via this particular device (node)
- * @reserved: reserved fields for future extensions
- */
-struct v4l2_capability {
- __u8 driver[16];
- __u8 card[32];
- __u8 bus_info[32];
- __u32 version;
- __u32 capabilities;
- __u32 device_caps;
- __u32 reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */
-#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000
-/* Is a video mem-to-mem device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000
-/* Is a video mem-to-mem device */
-#define V4L2_CAP_VIDEO_M2M 0x00008000
-
-#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */
-#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */
-#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */
-#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */
-
-#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
-#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */
-
-/*
- * V I D E O I M A G E F O R M A T
- */
-struct v4l2_pix_format {
- __u32 width;
- __u32 height;
- __u32 pixelformat;
- __u32 field; /* enum v4l2_field */
- __u32 bytesperline; /* for padding, zero if unused */
- __u32 sizeimage;
- __u32 colorspace; /* enum v4l2_colorspace */
- __u32 priv; /* private data, depends on pixelformat */
-};
-
-/* Pixel format FOURCC depth Description */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */
-#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */
-#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
-#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
-#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
-#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
-#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
-#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
-#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */
-#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */
-#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */
-#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */
-#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */
-#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */
-#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */
-#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */
-#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */
-#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */
-#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */
-#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
-#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */
-#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */
-#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved */
-#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
-#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
-#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
-#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
-#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
-#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved */
-#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
-#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
-#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */
-#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */
- /* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
-#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
- /*
- * 10bit raw bayer, expanded to 16 bits
- * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
- */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */
-#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */
-#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */
-#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
-#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */
-#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */
-#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */
-#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */
-#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
-
-/* Vendor-specific formats */
-#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
-
-/*
- * F O R M A T E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
- __u32 index; /* Format number */
- __u32 type; /* enum v4l2_buf_type */
- __u32 flags;
- __u8 description[32]; /* Description string */
- __u32 pixelformat; /* Format fourcc */
- __u32 reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED 0x0002
-
-#if 1
- /* Experimental Frame Size and frame rate enumeration */
-/*
- * F R A M E S I Z E E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
- V4L2_FRMSIZE_TYPE_DISCRETE = 1,
- V4L2_FRMSIZE_TYPE_CONTINUOUS = 2,
- V4L2_FRMSIZE_TYPE_STEPWISE = 3,
-};
-
-struct v4l2_frmsize_discrete {
- __u32 width; /* Frame width [pixel] */
- __u32 height; /* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
- __u32 min_width; /* Minimum frame width [pixel] */
- __u32 max_width; /* Maximum frame width [pixel] */
- __u32 step_width; /* Frame width step size [pixel] */
- __u32 min_height; /* Minimum frame height [pixel] */
- __u32 max_height; /* Maximum frame height [pixel] */
- __u32 step_height; /* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
- __u32 index; /* Frame size number */
- __u32 pixel_format; /* Pixel format */
- __u32 type; /* Frame size type the device supports. */
-
- union { /* Frame size */
- struct v4l2_frmsize_discrete discrete;
- struct v4l2_frmsize_stepwise stepwise;
- };
-
- __u32 reserved[2]; /* Reserved space for future use */
-};
-
-/*
- * F R A M E R A T E E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
- V4L2_FRMIVAL_TYPE_DISCRETE = 1,
- V4L2_FRMIVAL_TYPE_CONTINUOUS = 2,
- V4L2_FRMIVAL_TYPE_STEPWISE = 3,
-};
-
-struct v4l2_frmival_stepwise {
- struct v4l2_fract min; /* Minimum frame interval [s] */
- struct v4l2_fract max; /* Maximum frame interval [s] */
- struct v4l2_fract step; /* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
- __u32 index; /* Frame format index */
- __u32 pixel_format; /* Pixel format */
- __u32 width; /* Frame width */
- __u32 height; /* Frame height */
- __u32 type; /* Frame interval type the device supports. */
-
- union { /* Frame interval */
- struct v4l2_fract discrete;
- struct v4l2_frmival_stepwise stepwise;
- };
-
- __u32 reserved[2]; /* Reserved space for future use */
-};
-#endif
-
-/*
- * T I M E C O D E
- */
-struct v4l2_timecode {
- __u32 type;
- __u32 flags;
- __u8 frames;
- __u8 seconds;
- __u8 minutes;
- __u8 hours;
- __u8 userbits[4];
-};
-
-/* Type */
-#define V4L2_TC_TYPE_24FPS 1
-#define V4L2_TC_TYPE_25FPS 2
-#define V4L2_TC_TYPE_30FPS 3
-#define V4L2_TC_TYPE_50FPS 4
-#define V4L2_TC_TYPE_60FPS 5
-
-/* Flags */
-#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME 0x0002
-#define V4L2_TC_USERBITS_field 0x000C
-#define V4L2_TC_USERBITS_USERDEFINED 0x0000
-#define V4L2_TC_USERBITS_8BITCHARS 0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
- int quality;
-
- int APPn; /* Number of APP segment to be written,
- * must be 0..15 */
- int APP_len; /* Length of data in JPEG APPn segment */
- char APP_data[60]; /* Data in the JPEG APPn segment. */
-
- int COM_len; /* Length of data in JPEG COM segment */
- char COM_data[60]; /* Data in JPEG COM segment */
-
- __u32 jpeg_markers; /* Which markers should go into the JPEG
- * output. Unless you exactly know what
- * you do, leave them untouched.
- * Inluding less markers will make the
- * resulting code smaller, but there will
- * be fewer applications which can read it.
- * The presence of the APP and COM marker
- * is influenced by APP_len and COM_len
- * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will
- * allways use APP0 */
-};
-
-/*
- * M E M O R Y - M A P P I N G B U F F E R S
- */
-struct v4l2_requestbuffers {
- __u32 count;
- __u32 type; /* enum v4l2_buf_type */
- __u32 memory; /* enum v4l2_memory */
- __u32 reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused: number of bytes occupied by data in the plane (payload)
- * @length: size of this plane (NOT the payload) in bytes
- * @mem_offset: when memory in the associated struct v4l2_buffer is
- * V4L2_MEMORY_MMAP, equals the offset from the start of
- * the device memory for this plane (or is a "cookie" that
- * should be passed to mmap() called on the video node)
- * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- * pointing to this plane
- * @data_offset: offset in the plane to the start of data; usually 0,
- * unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
- __u32 bytesused;
- __u32 length;
- union {
- __u32 mem_offset;
- unsigned long userptr;
- } m;
- __u32 data_offset;
- __u32 reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index: id number of the buffer
- * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for
- * multiplanar buffers);
- * @bytesused: number of bytes occupied by data in the buffer (payload);
- * unused (set to 0) for multiplanar buffers
- * @flags: buffer informational flags
- * @field: enum v4l2_field; field order of the image in the buffer
- * @timestamp: frame timestamp
- * @timecode: frame timecode
- * @sequence: sequence count of this frame
- * @memory: enum v4l2_memory; the method, in which the actual video data is
- * passed
- * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- * offset from the start of the device memory for this plane,
- * (or a "cookie" that should be passed to mmap() as offset)
- * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- * a userspace pointer pointing to this buffer
- * @planes: for multiplanar buffers; userspace pointer to the array of plane
- * info structs for this buffer
- * @length: size in bytes of the buffer (NOT its payload) for single-plane
- * buffers (when type != *_MPLANE); number of elements in the
- * planes array for multi-plane buffers
- * @input: input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
- __u32 index;
- __u32 type;
- __u32 bytesused;
- __u32 flags;
- __u32 field;
- struct timeval timestamp;
- struct v4l2_timecode timecode;
- __u32 sequence;
-
- /* memory location */
- __u32 memory;
- union {
- __u32 offset;
- unsigned long userptr;
- struct v4l2_plane *planes;
- } m;
- __u32 length;
- __u32 reserved2;
- __u32 reserved;
-};
-
-/* Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR 0x0040
-#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */
-#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000
-
-/*
- * O V E R L A Y P R E V I E W
- */
-struct v4l2_framebuffer {
- __u32 capability;
- __u32 flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
- void *base;
- struct v4l2_pix_format fmt;
-};
-/* Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY 0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080
-/* Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY 0x0001
-#define V4L2_FBUF_FLAG_OVERLAY 0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040
-
-struct v4l2_clip {
- struct v4l2_rect c;
- struct v4l2_clip __user *next;
-};
-
-struct v4l2_window {
- struct v4l2_rect w;
- __u32 field; /* enum v4l2_field */
- __u32 chromakey;
- struct v4l2_clip __user *clips;
- __u32 clipcount;
- void __user *bitmap;
- __u8 global_alpha;
-};
-
-/*
- * C A P T U R E P A R A M E T E R S
- */
-struct v4l2_captureparm {
- __u32 capability; /* Supported modes */
- __u32 capturemode; /* Current mode */
- struct v4l2_fract timeperframe; /* Time per frame in .1us units */
- __u32 extendedmode; /* Driver-specific extensions */
- __u32 readbuffers; /* # of buffers for read */
- __u32 reserved[4];
-};
-
-/* Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */
-
-struct v4l2_outputparm {
- __u32 capability; /* Supported modes */
- __u32 outputmode; /* Current mode */
- struct v4l2_fract timeperframe; /* Time per frame in seconds */
- __u32 extendedmode; /* Driver-specific extensions */
- __u32 writebuffers; /* # of buffers for write */
- __u32 reserved[4];
-};
-
-/*
- * I N P U T I M A G E C R O P P I N G
- */
-struct v4l2_cropcap {
- __u32 type; /* enum v4l2_buf_type */
- struct v4l2_rect bounds;
- struct v4l2_rect defrect;
- struct v4l2_fract pixelaspect;
-};
-
-struct v4l2_crop {
- __u32 type; /* enum v4l2_buf_type */
- struct v4l2_rect c;
-};
-
-/**
- * struct v4l2_selection - selection info
- * @type: buffer type (do not use *_MPLANE types)
- * @target: Selection target, used to choose one of possible rectangles;
- * defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r: coordinates of selection window
- * @reserved: for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
- __u32 type;
- __u32 target;
- __u32 flags;
- struct v4l2_rect r;
- __u32 reserved[9];
-};
-
-
-/*
- * A N A L O G V I D E O S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */
-#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */
-#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */
-
-#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000)
-
-/* FIXME:
- Although std_id is 64 bits, there is an issue on PPC32 architecture that
- makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
- this value to 32 bits.
- As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
- it should work fine. However, if needed to add more than two standards,
- v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
- V4L2_STD_NTSC_M_JP |\
- V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
- V4L2_STD_SECAM_K |\
- V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\
- V4L2_STD_SECAM_G |\
- V4L2_STD_SECAM_H |\
- V4L2_STD_SECAM_DK |\
- V4L2_STD_SECAM_L |\
- V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
- V4L2_STD_PAL_B1 |\
- V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\
- V4L2_STD_PAL_D1 |\
- V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\
- V4L2_STD_PAL_DK |\
- V4L2_STD_PAL_H |\
- V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B (V4L2_STD_PAL_B |\
- V4L2_STD_PAL_B1 |\
- V4L2_STD_SECAM_B)
-#define V4L2_STD_G (V4L2_STD_PAL_G |\
- V4L2_STD_SECAM_G)
-#define V4L2_STD_H (V4L2_STD_PAL_H |\
- V4L2_STD_SECAM_H)
-#define V4L2_STD_L (V4L2_STD_SECAM_L |\
- V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH (V4L2_STD_G |\
- V4L2_STD_H)
-#define V4L2_STD_DK (V4L2_STD_PAL_DK |\
- V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG (V4L2_STD_B |\
- V4L2_STD_G)
-#define V4L2_STD_MN (V4L2_STD_PAL_M |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc |\
- V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\
- V4L2_STD_PAL_M |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\
- V4L2_STD_PAL_60 |\
- V4L2_STD_NTSC |\
- V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50 (V4L2_STD_PAL |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc |\
- V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\
- V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN 0
-#define V4L2_STD_ALL (V4L2_STD_525_60 |\
- V4L2_STD_625_50)
-
-struct v4l2_standard {
- __u32 index;
- v4l2_std_id id;
- __u8 name[24];
- struct v4l2_fract frameperiod; /* Frames, not fields */
- __u32 framelines;
- __u32 reserved[4];
-};
-
-/* The DV Preset API is deprecated in favor of the DV Timings API.
- New drivers shouldn't use this anymore! */
-
-/*
- * V I D E O T I M I N G S D V P R E S E T
- */
-struct v4l2_dv_preset {
- __u32 preset;
- __u32 reserved[4];
-};
-
-/*
- * D V P R E S E T S E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
- __u32 index;
- __u32 preset;
- __u8 name[32]; /* Name of the preset timing */
- __u32 width;
- __u32 height;
- __u32 reserved[4];
-};
-
-/*
- * D V P R E S E T V A L U E S
- */
-#define V4L2_DV_INVALID 0
-#define V4L2_DV_480P59_94 1 /* BT.1362 */
-#define V4L2_DV_576P50 2 /* BT.1362 */
-#define V4L2_DV_720P24 3 /* SMPTE 296M */
-#define V4L2_DV_720P25 4 /* SMPTE 296M */
-#define V4L2_DV_720P30 5 /* SMPTE 296M */
-#define V4L2_DV_720P50 6 /* SMPTE 296M */
-#define V4L2_DV_720P59_94 7 /* SMPTE 274M */
-#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */
-#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */
-#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */
-#define V4L2_DV_1080I25 11 /* BT.1120 */
-#define V4L2_DV_1080I50 12 /* SMPTE 296M */
-#define V4L2_DV_1080I60 13 /* SMPTE 296M */
-#define V4L2_DV_1080P24 14 /* SMPTE 296M */
-#define V4L2_DV_1080P25 15 /* SMPTE 296M */
-#define V4L2_DV_1080P30 16 /* SMPTE 296M */
-#define V4L2_DV_1080P50 17 /* BT.1120 */
-#define V4L2_DV_1080P60 18 /* BT.1120 */
-
-/*
- * D V B T T I M I N G S
- */
-
-/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
- * @width: total width of the active video in pixels
- * @height: total height of the active video in lines
- * @interlaced: Interlaced or progressive
- * @polarities: Positive or negative polarities
- * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @hfrontporch:Horizontal front porch in pixels
- * @hsync: Horizontal Sync length in pixels
- * @hbackporch: Horizontal back porch in pixels
- * @vfrontporch:Vertical front porch in lines
- * @vsync: Vertical Sync length in lines
- * @vbackporch: Vertical back porch in lines
- * @il_vfrontporch:Vertical front porch for the even field
- * (aka field 2) of interlaced field formats
- * @il_vsync: Vertical Sync length for the even field
- * (aka field 2) of interlaced field formats
- * @il_vbackporch:Vertical back porch for the even field
- * (aka field 2) of interlaced field formats
- * @standards: Standards the timing belongs to
- * @flags: Flags
- * @reserved: Reserved fields, must be zeroed.
- *
- * A note regarding vertical interlaced timings: height refers to the total
- * height of the active video frame (= two fields). The blanking timings refer
- * to the blanking of each field. So the height of the total frame is
- * calculated as follows:
- *
- * tot_height = height + vfrontporch + vsync + vbackporch +
- * il_vfrontporch + il_vsync + il_vbackporch
- *
- * The active height of each field is height / 2.
- */
-struct v4l2_bt_timings {
- __u32 width;
- __u32 height;
- __u32 interlaced;
- __u32 polarities;
- __u64 pixelclock;
- __u32 hfrontporch;
- __u32 hsync;
- __u32 hbackporch;
- __u32 vfrontporch;
- __u32 vsync;
- __u32 vbackporch;
- __u32 il_vfrontporch;
- __u32 il_vsync;
- __u32 il_vbackporch;
- __u32 standards;
- __u32 flags;
- __u32 reserved[14];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define V4L2_DV_PROGRESSIVE 0
-#define V4L2_DV_INTERLACED 1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL 0x00000001
-#define V4L2_DV_HSYNC_POS_POL 0x00000002
-
-/* Timings standards */
-#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */
-#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */
-#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */
-#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */
-
-/* Flags */
-
-/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
- GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
- intervals are reduced, allowing a higher resolution over the same
- bandwidth. This is a read-only flag. */
-#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
-/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
- of six. These formats can be optionally played at 1 / 1.001 speed.
- This is a read-only flag. */
-#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
-/* CEA-861 specific: only valid for video transmitters, the flag is cleared
- by receivers.
- If the framerate of the format is a multiple of six, then the pixelclock
- used to set up the transmitter is divided by 1.001 to make it compatible
- with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
- 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
- such frequencies, then the flag will also be cleared. */
-#define V4L2_DV_FL_REDUCED_FPS (1 << 2)
-/* Specific to interlaced formats: if set, then field 1 is really one half-line
- longer and field 2 is really one half-line shorter, so each field has
- exactly the same number of half-lines. Whether half-lines can be detected
- or used depends on the hardware. */
-#define V4L2_DV_FL_HALF_LINE (1 << 0)
-
-
-/** struct v4l2_dv_timings - DV timings
- * @type: the type of the timings
- * @bt: BT656/1120 timings
- */
-struct v4l2_dv_timings {
- __u32 type;
- union {
- struct v4l2_bt_timings bt;
- __u32 reserved[32];
- };
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
-
-
-/** struct v4l2_enum_dv_timings - DV timings enumeration
- * @index: enumeration index
- * @reserved: must be zeroed
- * @timings: the timings for the given index
- */
-struct v4l2_enum_dv_timings {
- __u32 index;
- __u32 reserved[3];
- struct v4l2_dv_timings timings;
-};
-
-/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
- * @min_width: width in pixels
- * @max_width: width in pixels
- * @min_height: height in lines
- * @max_height: height in lines
- * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @standards: Supported standards
- * @capabilities: Supported capabilities
- * @reserved: Must be zeroed
- */
-struct v4l2_bt_timings_cap {
- __u32 min_width;
- __u32 max_width;
- __u32 min_height;
- __u32 max_height;
- __u64 min_pixelclock;
- __u64 max_pixelclock;
- __u32 standards;
- __u32 capabilities;
- __u32 reserved[16];
-} __attribute__ ((packed));
-
-/* Supports interlaced formats */
-#define V4L2_DV_BT_CAP_INTERLACED (1 << 0)
-/* Supports progressive formats */
-#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1)
-/* Supports CVT/GTF reduced blanking */
-#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2)
-/* Supports custom formats */
-#define V4L2_DV_BT_CAP_CUSTOM (1 << 3)
-
-/** struct v4l2_dv_timings_cap - DV timings capabilities
- * @type: the type of the timings (same as in struct v4l2_dv_timings)
- * @bt: the BT656/1120 timings capabilities
- */
-struct v4l2_dv_timings_cap {
- __u32 type;
- __u32 reserved[3];
- union {
- struct v4l2_bt_timings_cap bt;
- __u32 raw_data[32];
- };
-};
-
-
-/*
- * V I D E O I N P U T S
- */
-struct v4l2_input {
- __u32 index; /* Which input */
- __u8 name[32]; /* Label */
- __u32 type; /* Type of input */
- __u32 audioset; /* Associated audios (bitfield) */
- __u32 tuner; /* enum v4l2_tuner_type */
- v4l2_std_id std;
- __u32 status;
- __u32 capabilities;
- __u32 reserved[3];
-};
-
-/* Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER 1
-#define V4L2_INPUT_TYPE_CAMERA 2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL 0x00000002
-#define V4L2_IN_ST_NO_COLOR 0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */
-#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */
-
-/*
- * V I D E O O U T P U T S
- */
-struct v4l2_output {
- __u32 index; /* Which output */
- __u8 name[32]; /* Label */
- __u32 type; /* Type of output */
- __u32 audioset; /* Associated audios (bitfield) */
- __u32 modulator; /* Associated modulator */
- v4l2_std_id std;
- __u32 capabilities;
- __u32 reserved[3];
-};
-/* Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR 1
-#define V4L2_OUTPUT_TYPE_ANALOG 2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */
-
-/*
- * C O N T R O L S
- */
-struct v4l2_control {
- __u32 id;
- __s32 value;
-};
-
-struct v4l2_ext_control {
- __u32 id;
- __u32 size;
- __u32 reserved2[1];
- union {
- __s32 value;
- __s64 value64;
- char *string;
- };
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
- __u32 ctrl_class;
- __u32 count;
- __u32 error_idx;
- __u32 reserved[2];
- struct v4l2_ext_control *controls;
-};
-
-#define V4L2_CTRL_ID_MASK (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
- V4L2_CTRL_TYPE_INTEGER = 1,
- V4L2_CTRL_TYPE_BOOLEAN = 2,
- V4L2_CTRL_TYPE_MENU = 3,
- V4L2_CTRL_TYPE_BUTTON = 4,
- V4L2_CTRL_TYPE_INTEGER64 = 5,
- V4L2_CTRL_TYPE_CTRL_CLASS = 6,
- V4L2_CTRL_TYPE_STRING = 7,
- V4L2_CTRL_TYPE_BITMASK = 8,
- V4L2_CTRL_TYPE_INTEGER_MENU = 9,
-};
-
-/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
- __u32 id;
- __u32 type; /* enum v4l2_ctrl_type */
- __u8 name[32]; /* Whatever */
- __s32 minimum; /* Note signedness */
- __s32 maximum;
- __s32 step;
- __s32 default_value;
- __u32 flags;
- __u32 reserved[2];
-};
-
-/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
- __u32 id;
- __u32 index;
- union {
- __u8 name[32]; /* Whatever */
- __s64 value;
- };
- __u32 reserved;
-} __attribute__ ((packed));
-
-/* Control flags */
-#define V4L2_CTRL_FLAG_DISABLED 0x0001
-#define V4L2_CTRL_FLAG_GRABBED 0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 0x0004
-#define V4L2_CTRL_FLAG_UPDATE 0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 0x0010
-#define V4L2_CTRL_FLAG_SLIDER 0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
-#define V4L2_CTRL_FLAG_VOLATILE 0x0080
-
-/* Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
-
-/* User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS 1024
-/* IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE 0x08000000
-
-
-/* DV-class control IDs defined by V4L2 */
-#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900)
-#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1)
-
-#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1)
-#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2)
-#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3)
-#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4)
-enum v4l2_dv_tx_mode {
- V4L2_DV_TX_MODE_DVI_D = 0,
- V4L2_DV_TX_MODE_HDMI = 1,
-};
-#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5)
-enum v4l2_dv_rgb_range {
- V4L2_DV_RGB_RANGE_AUTO = 0,
- V4L2_DV_RGB_RANGE_LIMITED = 1,
- V4L2_DV_RGB_RANGE_FULL = 2,
-};
-
-#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100)
-#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101)
-
-/*
- * T U N I N G
- */
-struct v4l2_tuner {
- __u32 index;
- __u8 name[32];
- __u32 type; /* enum v4l2_tuner_type */
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 rxsubchans;
- __u32 audmode;
- __s32 signal;
- __s32 afc;
- __u32 reserved[4];
-};
-
-struct v4l2_modulator {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 txsubchans;
- __u32 reserved[4];
-};
-
-/* Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW 0x0001
-#define V4L2_TUNER_CAP_NORM 0x0002
-#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004
-#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008
-#define V4L2_TUNER_CAP_STEREO 0x0010
-#define V4L2_TUNER_CAP_LANG2 0x0020
-#define V4L2_TUNER_CAP_SAP 0x0020
-#define V4L2_TUNER_CAP_LANG1 0x0040
-#define V4L2_TUNER_CAP_RDS 0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200
-#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400
-#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800
-
-/* Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO 0x0001
-#define V4L2_TUNER_SUB_STEREO 0x0002
-#define V4L2_TUNER_SUB_LANG2 0x0004
-#define V4L2_TUNER_SUB_SAP 0x0004
-#define V4L2_TUNER_SUB_LANG1 0x0008
-#define V4L2_TUNER_SUB_RDS 0x0010
-
-/* Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO 0x0000
-#define V4L2_TUNER_MODE_STEREO 0x0001
-#define V4L2_TUNER_MODE_LANG2 0x0002
-#define V4L2_TUNER_MODE_SAP 0x0002
-#define V4L2_TUNER_MODE_LANG1 0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004
-
-struct v4l2_frequency {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 frequency;
- __u32 reserved[8];
-};
-
-#define V4L2_BAND_MODULATION_VSB (1 << 1)
-#define V4L2_BAND_MODULATION_FM (1 << 2)
-#define V4L2_BAND_MODULATION_AM (1 << 3)
-
-struct v4l2_frequency_band {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 index;
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 modulation;
- __u32 reserved[9];
-};
-
-struct v4l2_hw_freq_seek {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 seek_upward;
- __u32 wrap_around;
- __u32 spacing;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 reserved[5];
-};
-
-/*
- * R D S
- */
-
-struct v4l2_rds_data {
- __u8 lsb;
- __u8 msb;
- __u8 block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 0x7
-#define V4L2_RDS_BLOCK_A 0
-#define V4L2_RDS_BLOCK_B 1
-#define V4L2_RDS_BLOCK_C 2
-#define V4L2_RDS_BLOCK_D 3
-#define V4L2_RDS_BLOCK_C_ALT 4
-#define V4L2_RDS_BLOCK_INVALID 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 0x80
-
-/*
- * A U D I O
- */
-struct v4l2_audio {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 mode;
- __u32 reserved[2];
-};
-
-/* Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO 0x00001
-#define V4L2_AUDCAP_AVL 0x00002
-
-/* Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL 0x00001
-
-struct v4l2_audioout {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 mode;
- __u32 reserved[2];
-};
-
-/*
- * M P E G S E R V I C E S
- *
- * NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I (0)
-#define V4L2_ENC_IDX_FRAME_P (1)
-#define V4L2_ENC_IDX_FRAME_B (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
- __u64 offset;
- __u64 pts;
- __u32 length;
- __u32 flags;
- __u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
- __u32 entries;
- __u32 entries_cap;
- __u32 reserved[4];
- struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START (0)
-#define V4L2_ENC_CMD_STOP (1)
-#define V4L2_ENC_CMD_PAUSE (2)
-#define V4L2_ENC_CMD_RESUME (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0)
-
-struct v4l2_encoder_cmd {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u32 data[8];
- } raw;
- };
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START (0)
-#define V4L2_DEC_CMD_STOP (1)
-#define V4L2_DEC_CMD_PAUSE (2)
-#define V4L2_DEC_CMD_RESUME (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE (0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP (1)
-
-/* The structure must be zeroed before use by the application
- This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u64 pts;
- } stop;
-
- struct {
- /* 0 or 1000 specifies normal speed,
- 1 specifies forward single stepping,
- -1 specifies backward single stepping,
- >1: playback at speed/1000 of the normal speed,
- <-1: reverse playback at (-speed/1000) of the normal speed. */
- __s32 speed;
- __u32 format;
- } start;
-
- struct {
- __u32 data[16];
- } raw;
- };
-};
-#endif
-
-
-/*
- * D A T A S E R V I C E S ( V B I )
- *
- * Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
- __u32 sampling_rate; /* in 1 Hz */
- __u32 offset;
- __u32 samples_per_line;
- __u32 sample_format; /* V4L2_PIX_FMT_* */
- __s32 start[2];
- __u32 count[2];
- __u32 flags; /* V4L2_VBI_* */
- __u32 reserved[2]; /* must be zero */
-};
-
-/* VBI flags */
-#define V4L2_VBI_UNSYNC (1 << 0)
-#define V4L2_VBI_INTERLACED (1 << 1)
-
-/* Sliced VBI
- *
- * This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
- __u16 service_set;
- /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
- service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
- (equals frame lines 313-336 for 625 line video
- standards, 263-286 for 525 line standards) */
- __u16 service_lines[2][24];
- __u32 io_size;
- __u32 reserved[2]; /* must be zero */
-};
-
-/* Teletext World System Teletext
- (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525 (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625 (0x4000)
-
-#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
- __u16 service_set;
- /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
- service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
- (equals frame lines 313-336 for 625 line video
- standards, 263-286 for 525 line standards) */
- __u16 service_lines[2][24];
- __u32 type; /* enum v4l2_buf_type */
- __u32 reserved[3]; /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
- __u32 id;
- __u32 field; /* 0: first field, 1: second field */
- __u32 line; /* 1-23 */
- __u32 reserved; /* must be 0 */
- __u8 data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here. See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625 (5)
-#define V4L2_MPEG_VBI_IVTV_VPS (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
- __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */
- __u8 data[42]; /* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
- __le32 linemask[2]; /* Bitmasks of VBI service lines present */
- struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
- struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
- __u8 magic[4];
- union {
- struct v4l2_mpeg_vbi_itv0 itv0;
- struct v4l2_mpeg_vbi_ITV0 ITV0;
- };
-} __attribute__ ((packed));
-
-/*
- * A G G R E G A T E S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage: maximum size in bytes required for data, for which
- * this plane will be used
- * @bytesperline: distance in bytes between the leftmost pixels in two
- * adjacent lines
- */
-struct v4l2_plane_pix_format {
- __u32 sizeimage;
- __u16 bytesperline;
- __u16 reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width: image width in pixels
- * @height: image height in pixels
- * @pixelformat: little endian four character code (fourcc)
- * @field: enum v4l2_field; field order (for interlaced video)
- * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
- * @plane_fmt: per-plane information
- * @num_planes: number of planes for this format
- */
-struct v4l2_pix_format_mplane {
- __u32 width;
- __u32 height;
- __u32 pixelformat;
- __u32 field;
- __u32 colorspace;
-
- struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES];
- __u8 num_planes;
- __u8 reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type: enum v4l2_buf_type; type of the data stream
- * @pix: definition of an image format
- * @pix_mp: definition of a multiplanar image format
- * @win: definition of an overlaid image
- * @vbi: raw VBI capture or output parameters
- * @sliced: sliced VBI capture or output parameters
- * @raw_data: placeholder for future extensions and custom formats
- */
-struct v4l2_format {
- __u32 type;
- union {
- struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
- struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
- struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
- struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */
- struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
- __u8 raw_data[200]; /* user-defined */
- } fmt;
-};
-
-/* Stream type-dependent parameters
- */
-struct v4l2_streamparm {
- __u32 type; /* enum v4l2_buf_type */
- union {
- struct v4l2_captureparm capture;
- struct v4l2_outputparm output;
- __u8 raw_data[200]; /* user-defined */
- } parm;
-};
-
-/*
- * E V E N T S
- */
-
-#define V4L2_EVENT_ALL 0
-#define V4L2_EVENT_VSYNC 1
-#define V4L2_EVENT_EOS 2
-#define V4L2_EVENT_CTRL 3
-#define V4L2_EVENT_FRAME_SYNC 4
-#define V4L2_EVENT_PRIVATE_START 0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
- /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
- __u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1)
-
-struct v4l2_event_ctrl {
- __u32 changes;
- __u32 type;
- union {
- __s32 value;
- __s64 value64;
- };
- __u32 flags;
- __s32 minimum;
- __s32 maximum;
- __s32 step;
- __s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
- __u32 frame_sequence;
-};
-
-struct v4l2_event {
- __u32 type;
- union {
- struct v4l2_event_vsync vsync;
- struct v4l2_event_ctrl ctrl;
- struct v4l2_event_frame_sync frame_sync;
- __u8 data[64];
- } u;
- __u32 pending;
- __u32 sequence;
- struct timespec timestamp;
- __u32 id;
- __u32 reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1)
-
-struct v4l2_event_subscription {
- __u32 type;
- __u32 id;
- __u32 flags;
- __u32 reserved[5];
-};
-
-/*
- * A D V A N C E D D E B U G G I N G
- *
- * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
- __u32 type; /* Match type */
- union { /* Match this chip, meaning determined by type */
- __u32 addr;
- char name[32];
- };
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
- struct v4l2_dbg_match match;
- __u32 size; /* register size in bytes */
- __u64 reg;
- __u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
- struct v4l2_dbg_match match;
- __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */
- __u32 revision; /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index: on return, index of the first created buffer
- * @count: entry: number of requested buffers,
- * return: number of created buffers
- * @memory: enum v4l2_memory; buffer memory type
- * @format: frame format, for which buffers are requested
- * @reserved: future extensions
- */
-struct v4l2_create_buffers {
- __u32 index;
- __u32 count;
- __u32 memory;
- struct v4l2_format format;
- __u32 reserved[8];
-};
-
-/*
- * I O C T L C O D E S F O R V I D E O D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability)
-#define VIDIOC_RESERVED _IO('V', 1)
-#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format)
-#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format)
-#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY _IOW('V', 14, int)
-#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF _IOW('V', 19, int)
-#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT _IOR('V', 38, int)
-#define VIDIOC_S_INPUT _IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT _IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */
-#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
- Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
- You must be root to use these ioctls. Never use these in applications! */
-#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register)
-#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
- Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek)
-
-/* These four DV Preset ioctls are deprecated in favor of the DV Timings
- ioctls. */
-#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset)
-#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset)
-#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset)
-#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings)
-#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings)
-#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event)
-#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription)
-#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
- versions */
-#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
- versions. */
-#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Experimental, these three ioctls may change over the next couple of kernel
- versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
-
-/* Experimental, this ioctl may change over the next couple of kernel
- versions. */
-#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band)
-
-/* Reminder: when adding new ioctls please add support for them to
- drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */
+#include <uapi/linux/videodev2.h>
#endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
deleted file mode 100644
index 277c4ad..0000000
--- a/include/linux/virtio_9p.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_VIRTIO_9P_H
-#define _LINUX_VIRTIO_9P_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio 9P */
-
-/* The mount point is specified in a config variable */
-#define VIRTIO_9P_MOUNT_TAG 0
-
-struct virtio_9p_config {
- /* length of the tag name */
- __u16 tag_len;
- /* non-NULL terminated tag name */
- __u8 tag[0];
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
deleted file mode 100644
index 652dc8b..0000000
--- a/include/linux/virtio_balloon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _LINUX_VIRTIO_BALLOON_H
-#define _LINUX_VIRTIO_BALLOON_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio balloon */
-#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
-#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
-
-/* Size of a PFN in the balloon interface. */
-#define VIRTIO_BALLOON_PFN_SHIFT 12
-
-struct virtio_balloon_config
-{
- /* Number of pages host wants Guest to give up. */
- __le32 num_pages;
- /* Number of pages we've actually got in balloon. */
- __le32 actual;
-};
-
-#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
-#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
-#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
-#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
-#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
-#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
-#define VIRTIO_BALLOON_S_NR 6
-
-struct virtio_balloon_stat {
- u16 tag;
- u64 val;
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
deleted file mode 100644
index 6d8e61c..0000000
--- a/include/linux/virtio_blk.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_VIRTIO_BLK_H
-#define _LINUX_VIRTIO_BLK_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* Feature bits */
-#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
-#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
-#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
-#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
-#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
-#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
-#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
-#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */
-#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
-#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */
-
-#ifndef __KERNEL__
-/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
-#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
-#endif
-
-#define VIRTIO_BLK_ID_BYTES 20 /* ID string length */
-
-struct virtio_blk_config {
- /* The capacity (in 512-byte sectors). */
- __u64 capacity;
- /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
- __u32 size_max;
- /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
- __u32 seg_max;
- /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
- struct virtio_blk_geometry {
- __u16 cylinders;
- __u8 heads;
- __u8 sectors;
- } geometry;
-
- /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
- __u32 blk_size;
-
- /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */
- /* exponent for physical block per logical block. */
- __u8 physical_block_exp;
- /* alignment offset in logical blocks. */
- __u8 alignment_offset;
- /* minimum I/O size without performance penalty in logical blocks. */
- __u16 min_io_size;
- /* optimal sustained I/O size in logical blocks. */
- __u32 opt_io_size;
-
- /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
- __u8 wce;
-} __attribute__((packed));
-
-/*
- * Command types
- *
- * Usage is a bit tricky as some bits are used as flags and some are not.
- *
- * Rules:
- * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
- * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own
- * and may not be combined with any of the other flags.
- */
-
-/* These two define direction. */
-#define VIRTIO_BLK_T_IN 0
-#define VIRTIO_BLK_T_OUT 1
-
-/* This bit says it's a scsi command, not an actual read or write. */
-#define VIRTIO_BLK_T_SCSI_CMD 2
-
-/* Cache flush command */
-#define VIRTIO_BLK_T_FLUSH 4
-
-/* Get device ID command */
-#define VIRTIO_BLK_T_GET_ID 8
-
-/* Barrier before this op. */
-#define VIRTIO_BLK_T_BARRIER 0x80000000
-
-/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr {
- /* VIRTIO_BLK_T* */
- __u32 type;
- /* io priority. */
- __u32 ioprio;
- /* Sector (ie. 512 byte offset) */
- __u64 sector;
-};
-
-struct virtio_scsi_inhdr {
- __u32 errors;
- __u32 data_len;
- __u32 sense_len;
- __u32 residual;
-};
-
-/* And this is the final byte of the write scatter-gather list. */
-#define VIRTIO_BLK_S_OK 0
-#define VIRTIO_BLK_S_IOERR 1
-#define VIRTIO_BLK_S_UNSUPP 2
-#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index e2850a7..29b9104 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,60 +1,10 @@
#ifndef _LINUX_VIRTIO_CONFIG_H
#define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER 2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK 4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED 0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START 28
-#define VIRTIO_TRANSPORT_F_END 32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY 24
-#ifdef __KERNEL__
#include <linux/err.h>
#include <linux/bug.h>
#include <linux/virtio.h>
+#include <uapi/linux/virtio_config.h>
/**
* virtio_config_ops - operations for configuring a virtio device
@@ -213,5 +163,4 @@ int virtqueue_set_affinity(struct virtqueue *vq, int cpu)
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index bdf4b00..d2e2785 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,8 +1,3 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
/*
* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
* anyone can use the definitions to implement compatible drivers/servers:
@@ -34,44 +29,10 @@
* Copyright (C) Red Hat, Inc., 2009, 2010, 2011
* Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
*/
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
-
-#define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
-
-struct virtio_console_config {
- /* colums of the screens */
- __u16 cols;
- /* rows of the screens */
- __u16 rows;
- /* max. number of ports this device can hold */
- __u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
- __u32 id; /* Port number */
- __u16 event; /* The kind of control event (see below) */
- __u16 value; /* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY 0
-#define VIRTIO_CONSOLE_PORT_ADD 1
-#define VIRTIO_CONSOLE_PORT_REMOVE 2
-#define VIRTIO_CONSOLE_PORT_READY 3
-#define VIRTIO_CONSOLE_CONSOLE_PORT 4
-#define VIRTIO_CONSOLE_RESIZE 5
-#define VIRTIO_CONSOLE_PORT_OPEN 6
-#define VIRTIO_CONSOLE_PORT_NAME 7
+#include <uapi/linux/virtio_console.h>
-#ifdef __KERNEL__
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h
deleted file mode 100644
index 270fb22..0000000
--- a/include/linux/virtio_ids.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _LINUX_VIRTIO_IDS_H
-#define _LINUX_VIRTIO_IDS_H
-/*
- * Virtio IDs
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-#define VIRTIO_ID_NET 1 /* virtio net */
-#define VIRTIO_ID_BLOCK 2 /* virtio block */
-#define VIRTIO_ID_CONSOLE 3 /* virtio console */
-#define VIRTIO_ID_RNG 4 /* virtio rng */
-#define VIRTIO_ID_BALLOON 5 /* virtio balloon */
-#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */
-#define VIRTIO_ID_SCSI 8 /* virtio scsi */
-#define VIRTIO_ID_9P 9 /* 9p virtio console */
-
-#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
deleted file mode 100644
index 2470f54..0000000
--- a/include/linux/virtio_net.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef _LINUX_VIRTIO_NET_H
-#define _LINUX_VIRTIO_NET_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-#include <linux/if_ether.h>
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
-#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
-#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
-#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
-#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
- * network */
-
-#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
-#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
-
-struct virtio_net_config {
- /* The config defining mac address (if VIRTIO_NET_F_MAC) */
- __u8 mac[6];
- /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
- __u16 status;
-} __attribute__((packed));
-
-/* This is the first element of the scatter-gather list. If you don't
- * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr {
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
- __u8 flags;
-#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
- __u8 gso_type;
- __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
- __u16 gso_size; /* Bytes to append to hdr_len per frame */
- __u16 csum_start; /* Position to start checksumming from */
- __u16 csum_offset; /* Offset after that to place checksum */
-};
-
-/* This is the version of the header to use when the MRG_RXBUF
- * feature has been negotiated. */
-struct virtio_net_hdr_mrg_rxbuf {
- struct virtio_net_hdr hdr;
- __u16 num_buffers; /* Number of merged rx buffers */
-};
-
-/*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry. Data for the
- * command goes in between.
- */
-struct virtio_net_ctrl_hdr {
- __u8 class;
- __u8 cmd;
-} __attribute__((packed));
-
-typedef __u8 virtio_net_ctrl_ack;
-
-#define VIRTIO_NET_OK 0
-#define VIRTIO_NET_ERR 1
-
-/*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
-#define VIRTIO_NET_CTRL_RX 0
- #define VIRTIO_NET_CTRL_RX_PROMISC 0
- #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
- #define VIRTIO_NET_CTRL_RX_ALLUNI 2
- #define VIRTIO_NET_CTRL_RX_NOMULTI 3
- #define VIRTIO_NET_CTRL_RX_NOUNI 4
- #define VIRTIO_NET_CTRL_RX_NOBCAST 5
-
-/*
- * Control the MAC filter table.
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite. Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists. Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- */
-struct virtio_net_ctrl_mac {
- __u32 entries;
- __u8 macs[][ETH_ALEN];
-} __attribute__((packed));
-
-#define VIRTIO_NET_CTRL_MAC 1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
-
-/*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor. Del is the
- * opposite of add. Both commands expect an out entry containing a 2
- * byte VLAN ID. VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
-#define VIRTIO_NET_CTRL_VLAN 2
- #define VIRTIO_NET_CTRL_VLAN_ADD 0
- #define VIRTIO_NET_CTRL_VLAN_DEL 1
-
-/*
- * Control link announce acknowledgement
- *
- * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
- * driver has recevied the notification; device would clear the
- * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
- * this command.
- */
-#define VIRTIO_NET_CTRL_ANNOUNCE 3
- #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
-
-#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
deleted file mode 100644
index ea66f3f..0000000
--- a/include/linux/virtio_pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Virtio PCI driver
- *
- * This module allows virtio devices to be used over a virtual PCI device.
- * This can be used with QEMU based VMMs like KVM or Xen.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors:
- * Anthony Liguori <aliguori@us.ibm.com>
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _LINUX_VIRTIO_PCI_H
-#define _LINUX_VIRTIO_PCI_H
-
-#include <linux/virtio_config.h>
-
-/* A 32-bit r/o bitmask of the features supported by the host */
-#define VIRTIO_PCI_HOST_FEATURES 0
-
-/* A 32-bit r/w bitmask of features activated by the guest */
-#define VIRTIO_PCI_GUEST_FEATURES 4
-
-/* A 32-bit r/w PFN for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_PFN 8
-
-/* A 16-bit r/o queue size for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_NUM 12
-
-/* A 16-bit r/w queue selector */
-#define VIRTIO_PCI_QUEUE_SEL 14
-
-/* A 16-bit r/w queue notifier */
-#define VIRTIO_PCI_QUEUE_NOTIFY 16
-
-/* An 8-bit device status register. */
-#define VIRTIO_PCI_STATUS 18
-
-/* An 8-bit r/o interrupt status register. Reading the value will return the
- * current contents of the ISR and will also clear it. This is effectively
- * a read-and-acknowledge. */
-#define VIRTIO_PCI_ISR 19
-
-/* The bit of the ISR which indicates a device configuration change. */
-#define VIRTIO_PCI_ISR_CONFIG 0x2
-
-/* MSI-X registers: only enabled if MSI-X is enabled. */
-/* A 16-bit vector for configuration changes. */
-#define VIRTIO_MSI_CONFIG_VECTOR 20
-/* A 16-bit vector for selected queue notifications. */
-#define VIRTIO_MSI_QUEUE_VECTOR 22
-/* Vector value used to disable MSI for queue */
-#define VIRTIO_MSI_NO_VECTOR 0xffff
-
-/* The remaining space is defined by each driver as the per-driver
- * configuration space */
-#define VIRTIO_PCI_CONFIG(dev) ((dev)->msix_enabled ? 24 : 20)
-
-/* Virtio ABI version, this must match exactly */
-#define VIRTIO_PCI_ABI_VERSION 0
-
-/* How many bits to shift physical queue address written to QUEUE_PFN.
- * 12 is historical, and due to x86 page size. */
-#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
-
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize again. */
-#define VIRTIO_PCI_VRING_ALIGN 4096
-#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index c2d793a..63c6ea19 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -1,167 +1,9 @@
#ifndef _LINUX_VIRTIO_RING_H
#define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon. Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT 1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE 2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT 4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer. It's unreliable, so it's simply an optimization. Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY 1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer. It's unreliable, so it's simply an
- * optimization. */
-#define VRING_AVAIL_F_NO_INTERRUPT 1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC 28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX 29
-
-/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
-struct vring_desc {
- /* Address (guest-physical). */
- __u64 addr;
- /* Length. */
- __u32 len;
- /* The flags as indicated above. */
- __u16 flags;
- /* We chain unused descriptors via this, too */
- __u16 next;
-};
-
-struct vring_avail {
- __u16 flags;
- __u16 idx;
- __u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
- /* Index of start of used descriptor chain. */
- __u32 id;
- /* Total length of the descriptor chain which was used (written to) */
- __u32 len;
-};
-
-struct vring_used {
- __u16 flags;
- __u16 idx;
- struct vring_used_elem ring[];
-};
-
-struct vring {
- unsigned int num;
-
- struct vring_desc *desc;
-
- struct vring_avail *avail;
-
- struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this. We assume num is a power of 2.
- *
- * struct vring
- * {
- * // The actual descriptors (16 bytes each)
- * struct vring_desc desc[num];
- *
- * // A ring of available descriptor heads with free-running index.
- * __u16 avail_flags;
- * __u16 avail_idx;
- * __u16 available[num];
- * __u16 used_event_idx;
- *
- * // Padding to the next align boundary.
- * char pad[];
- *
- * // A ring of used descriptor heads with free-running index.
- * __u16 used_flags;
- * __u16 used_idx;
- * struct vring_used_elem used[num];
- * __u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
- unsigned long align)
-{
- vr->num = num;
- vr->desc = p;
- vr->avail = p + num*sizeof(struct vring_desc);
- vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
- + align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
- return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
- + align - 1) & ~(align - 1))
- + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
- /* Note: Xen has similar logic for notification hold-off
- * in include/xen/interface/io/ring.h with req_event and req_prod
- * corresponding to event_idx + 1 and new_idx respectively.
- * Note also that req_event and req_prod in Xen start at 1,
- * event indexes in virtio start at 0. */
- return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
#include <linux/irqreturn.h>
+#include <uapi/linux/virtio_ring.h>
+
struct virtio_device;
struct virtqueue;
@@ -179,5 +21,4 @@ void vring_del_virtqueue(struct virtqueue *vq);
void vring_transport_features(struct virtio_device *vdev);
irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
deleted file mode 100644
index c4d5de8..0000000
--- a/include/linux/virtio_rng.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _LINUX_VIRTIO_RNG_H
-#define _LINUX_VIRTIO_RNG_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 30a8dd9..b186e04 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,90 +1,8 @@
#ifndef _LINUX_VT_H
#define _LINUX_VT_H
+#include <uapi/linux/vt.h>
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1 /* must be at least 1 */
-#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
- /* Note: the ioctl VT_GETSTATE does not work for
- consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY 0x5600 /* find available vt */
-
-struct vt_mode {
- char mode; /* vt mode */
- char waitv; /* if set, hang on writes if not active */
- short relsig; /* signal to raise on release req */
- short acqsig; /* signal to raise on acquisition */
- short frsig; /* unused (set to 0) */
-};
-#define VT_GETMODE 0x5601 /* get mode of active vt */
-#define VT_SETMODE 0x5602 /* set mode of active vt */
-#define VT_AUTO 0x00 /* auto vt switching */
-#define VT_PROCESS 0x01 /* process controls switching */
-#define VT_ACKACQ 0x02 /* acknowledge switch */
-
-struct vt_stat {
- unsigned short v_active; /* active vt */
- unsigned short v_signal; /* signal to send */
- unsigned short v_state; /* vt bitmask */
-};
-#define VT_GETSTATE 0x5603 /* get global vt state info */
-#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */
-
-#define VT_RELDISP 0x5605 /* release display */
-
-#define VT_ACTIVATE 0x5606 /* make vt active */
-#define VT_WAITACTIVE 0x5607 /* wait for vt active */
-#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */
-
-struct vt_sizes {
- unsigned short v_rows; /* number of rows */
- unsigned short v_cols; /* number of columns */
- unsigned short v_scrollsize; /* number of lines of scrollback */
-};
-#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */
-
-struct vt_consize {
- unsigned short v_rows; /* number of rows */
- unsigned short v_cols; /* number of columns */
- unsigned short v_vlin; /* number of pixel rows on screen */
- unsigned short v_clin; /* number of pixel rows per character */
- unsigned short v_vcol; /* number of pixel columns on screen */
- unsigned short v_ccol; /* number of pixel columns per character */
-};
-#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D /* return hi font mask */
-
-struct vt_event {
- unsigned int event;
-#define VT_EVENT_SWITCH 0x0001 /* Console switch */
-#define VT_EVENT_BLANK 0x0002 /* Screen blank */
-#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */
-#define VT_EVENT_RESIZE 0x0008 /* Resize display */
-#define VT_MAX_EVENT 0x000F
- unsigned int oldev; /* Old console */
- unsigned int newev; /* New console (if changing) */
- unsigned int pad[4]; /* Padding for expansion */
-};
-
-#define VT_WAITEVENT 0x560E /* Wait for an event */
-
-struct vt_setactivate {
- unsigned int console;
- struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
/* Virtual Terminal events. */
#define VT_ALLOCATE 0x0001 /* Console got allocated */
@@ -106,8 +24,4 @@ static inline int vt_kmsg_redirect(int new)
#endif
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
#endif /* _LINUX_VT_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 1dee81c..168dfe1 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -1,28 +1,12 @@
#ifndef _LINUX_WAIT_H
#define _LINUX_WAIT_H
-#define WNOHANG 0x00000001
-#define WUNTRACED 0x00000002
-#define WSTOPPED WUNTRACED
-#define WEXITED 0x00000004
-#define WCONTINUED 0x00000008
-#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */
-
-#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */
-#define __WALL 0x40000000 /* Wait on all children, regardless of type */
-#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL 0
-#define P_PID 1
-#define P_PGID 2
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <asm/current.h>
+#include <uapi/linux/wait.h>
typedef struct __wait_queue wait_queue_t;
typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
@@ -663,6 +647,4 @@ static inline int wait_on_bit_lock(void *word, int bit,
return out_of_line_wait_on_bit_lock(word, bit, action, mode);
}
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3157cc1..cec4b41 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -43,413 +43,11 @@
* Jan 16, 1997 Gene Kozin router_devlist made public
* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h).
*****************************************************************************/
-
#ifndef _ROUTER_H
#define _ROUTER_H
-#define ROUTER_NAME "wanrouter" /* in case we ever change it */
-#define ROUTER_VERSION 1 /* version number */
-#define ROUTER_RELEASE 1 /* release (minor version) number */
-#define ROUTER_IOCTL 'W' /* for IOCTL calls */
-#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
- ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */
- ROUTER_DOWN, /* shut down device */
- ROUTER_STAT, /* get device status */
- ROUTER_IFNEW, /* add interface */
- ROUTER_IFDEL, /* delete interface */
- ROUTER_IFSTAT, /* get interface status */
- ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */
- ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define NLPID_IP 0xCC /* Internet Protocol Datagram */
-#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */
-#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */
-#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */
-#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */
-#define NLPID_Q933 0x08 /* CCITT Q.933 */
-
-/* Miscellaneous */
-#define WAN_IFNAME_SZ 15 /* max length of the interface name */
-#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */
-#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */
-#define USED_BY_FIELD 8 /* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 0x01
-#define UDP_FPIPE_TYPE 0x02
-#define UDP_CPIPE_TYPE 0x03
-#define UDP_DRVSTATS_TYPE 0x04
-#define UDP_INVALID_TYPE 0x05
-
-/* Command return code */
-#define CMD_OK 0 /* normal firmware return code */
-#define CMD_TIMEOUT 0xFF /* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK 0x00
-#define UDP_PKT_FRM_NETWORK 0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER 100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR 0xA1
-#define CRITICAL_INTR_HANDLED 0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
- unsigned lo_pvc; /* lowest permanent circuit number */
- unsigned hi_pvc; /* highest permanent circuit number */
- unsigned lo_svc; /* lowest switched circuit number */
- unsigned hi_svc; /* highest switched circuit number */
- unsigned hdlc_window; /* HDLC window size (1..7) */
- unsigned pkt_window; /* X.25 packet window size (1..7) */
- unsigned t1; /* HDLC timer T1, sec (1..30) */
- unsigned t2; /* HDLC timer T2, sec (0..29) */
- unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */
- unsigned n2; /* HDLC retransmission limit (1..30) */
- unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */
- unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */
- unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */
- unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */
- unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */
- unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */
- unsigned r10_r20; /* RESTART retransmission limit (0..250) */
- unsigned r12_r22; /* RESET retransmission limit (0..250) */
- unsigned r13_r23; /* CLEAR retransmission limit (0..250) */
- unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */
- unsigned x25_conf_opt; /* User defined x25 config optoins */
- unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
- unsigned char logging; /* Control connection logging */
- unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
- unsigned signalling; /* local in-channel signalling type */
- unsigned t391; /* link integrity verification timer */
- unsigned t392; /* polling verification timer */
- unsigned n391; /* full status polling cycle counter */
- unsigned n392; /* error threshold counter */
- unsigned n393; /* monitored events counter */
- unsigned dlci_num; /* number of DLCs (access node) */
- unsigned dlci[100]; /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
- unsigned restart_tmr; /* restart timer */
- unsigned auth_rsrt_tmr; /* authentication timer */
- unsigned auth_wait_tmr; /* authentication timer */
- unsigned mdm_fail_tmr; /* modem failure timer */
- unsigned dtr_drop_tmr; /* DTR drop timer */
- unsigned connect_tmout; /* connection timeout */
- unsigned conf_retry; /* max. retry */
- unsigned term_retry; /* max. retry */
- unsigned fail_retry; /* max. retry */
- unsigned auth_retry; /* max. retry */
- unsigned auth_options; /* authentication opt. */
- unsigned ip_options; /* IP options */
- char authenticator; /* AUTHENTICATOR or not */
- char ip_mode; /* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */
- unsigned char receive_only; /* no transmit buffering (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
- unsigned magic; /* magic number (for verification) */
- unsigned config_id; /* configuration structure identifier */
- /****** hardware configuration ******/
- unsigned ioport; /* adapter I/O port base */
- unsigned long maddr; /* dual-port memory address */
- unsigned msize; /* dual-port memory size */
- int irq; /* interrupt request level */
- int dma; /* DMA request level */
- char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */
- unsigned PCI_slot_no; /* S514 PCI adapter slot number */
- char auto_pci_cfg; /* S515 PCI automatic slot detection */
- char comm_port; /* Communication Port (PRI=0, SEC=1) */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned udp_port; /* UDP port for management */
- unsigned char ttl; /* Time To Live for UDP security */
- unsigned char ft1; /* FT1 Configurator Option */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */
- char station; /* DTE/DCE, primary/secondary, etc. */
- char connection; /* permanent/switched/on-demand */
- char read_mode; /* read mode: Polling or interrupt */
- char receive_only; /* disable tx buffers */
- char tty; /* Create a fake tty device */
- unsigned tty_major; /* Major number for wanpipe tty device */
- unsigned tty_minor; /* Minor number for wanpipe tty device */
- unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */
- char backup; /* Backup Mode */
- unsigned hw_opt[4]; /* other hardware options */
- unsigned reserved[4];
- /****** arbitrary data ***************/
- unsigned data_size; /* data buffer size */
- void* data; /* data buffer, e.g. firmware */
- union /****** protocol-specific ************/
- {
- wan_x25_conf_t x25; /* X.25 configuration */
- wan_ppp_conf_t ppp; /* PPP configuration */
- wan_fr_conf_t fr; /* frame relay configuration */
- wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */
- } u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define WANCONFIG_X25 101 /* X.25 link */
-#define WANCONFIG_FR 102 /* frame relay link */
-#define WANCONFIG_PPP 103 /* synchronous PPP link */
-#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */
-#define WANCONFIG_BSC 105 /* BiSync Streaming */
-#define WANCONFIG_HDLC 106 /* HDLC Support */
-#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define WANOPT_OFF 0
-#define WANOPT_ON 1
-#define WANOPT_NO 0
-#define WANOPT_YES 1
-
-/* intercace options */
-#define WANOPT_RS232 0
-#define WANOPT_V35 1
-
-/* data encoding options */
-#define WANOPT_NRZ 0
-#define WANOPT_NRZI 1
-#define WANOPT_FM0 2
-#define WANOPT_FM1 3
-
-/* link type options */
-#define WANOPT_POINTTOPOINT 0 /* RTS always active */
-#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */
-
-/* clocking options */
-#define WANOPT_EXTERNAL 0
-#define WANOPT_INTERNAL 1
-
-/* station options */
-#define WANOPT_DTE 0
-#define WANOPT_DCE 1
-#define WANOPT_CPE 0
-#define WANOPT_NODE 1
-#define WANOPT_SECONDARY 0
-#define WANOPT_PRIMARY 1
-
-/* connection options */
-#define WANOPT_PERMANENT 0 /* DTR always active */
-#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */
-#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */
-#define WANOPT_FR_Q933 2 /* ITU Q.933A */
-#define WANOPT_FR_LMI 3 /* LMI */
-
-/* PPP IP Mode Options */
-#define WANOPT_PPP_STATIC 0
-#define WANOPT_PPP_HOST 1
-#define WANOPT_PPP_PEER 2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 1
-#define WANOPT_TWO 2
-#define WANOPT_ONE_AND_HALF 3
-
-#define WANOPT_NONE 0
-#define WANOPT_ODD 1
-#define WANOPT_EVEN 2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define WANOPT_INTR 0
-#define WANOPT_POLL 1
-
-
-#define WANOPT_TTY_SYNC 0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
- unsigned state; /* link state */
- unsigned ndev; /* number of configured interfaces */
-
- /* link/interface configuration */
- unsigned connection; /* permanent/switched/on-demand */
- unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */
- unsigned mtu; /* max. transmit unit for this device */
-
- /* physical level statistics */
- unsigned modem_status; /* modem status */
- unsigned rx_frames; /* received frames count */
- unsigned rx_overruns; /* receiver overrun error count */
- unsigned rx_crc_err; /* receive CRC error count */
- unsigned rx_aborts; /* received aborted frames count */
- unsigned rx_bad_length; /* unexpetedly long/short frames count */
- unsigned rx_dropped; /* frames discarded at device level */
- unsigned tx_frames; /* transmitted frames count */
- unsigned tx_underruns; /* aborted transmissions (underruns) count */
- unsigned tx_timeouts; /* transmission timeouts */
- unsigned tx_rejects; /* other transmit errors */
-
- /* media level statistics */
- unsigned rx_bad_format; /* frames with invalid format */
- unsigned rx_bad_addr; /* frames with invalid media address */
- unsigned tx_retries; /* frames re-transmitted */
- unsigned reserved[16]; /* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
- WAN_UNCONFIGURED, /* link/channel is not configured */
- WAN_DISCONNECTED, /* link/channel is disconnected */
- WAN_CONNECTING, /* connection is in progress */
- WAN_CONNECTED, /* link/channel is operational */
- WAN_LIMIT, /* for verification only */
- WAN_DUALPORT, /* for Dual Port cards */
- WAN_DISCONNECTING,
- WAN_FT1_READY /* FT1 Configurator Ready */
-};
-
-enum {
- WAN_LOCAL_IP,
- WAN_POINTOPOINT_IP,
- WAN_NETMASK_IP,
- WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define WAN_MODEM_CTS 0x0001 /* CTS line active */
-#define WAN_MODEM_DCD 0x0002 /* DCD line active */
-#define WAN_MODEM_DTR 0x0010 /* DTR line active */
-#define WAN_MODEM_RTS 0x0020 /* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
- unsigned magic; /* magic number */
- unsigned config_id; /* configuration identifier */
- char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
- char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
- char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */
- unsigned idle_timeout; /* sec, before disconnecting */
- unsigned hold_timeout; /* sec, before re-connecting */
- unsigned cir; /* Committed Information Rate fwd,bwd*/
- unsigned bc; /* Committed Burst Size fwd, bwd */
- unsigned be; /* Excess Burst Size fwd, bwd */
- unsigned char enable_IPX; /* Enable or Disable IPX */
- unsigned char inarp; /* Send Inverse ARP requests Y/N */
- unsigned inarp_interval; /* sec, between InARP requests */
- unsigned long network_number; /* Network Number for IPX */
- char mc; /* Multicast on or off */
- char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
- unsigned char port; /* board port */
- unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */
- char pap; /* PAP enabled or disabled */
- char chap; /* CHAP enabled or disabled */
- unsigned char userid[511]; /* List of User Id */
- unsigned char passwd[511]; /* List of passwords */
- unsigned char sysname[31]; /* Name of the system */
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
- unsigned char ttl; /* Time To Live for UDP security */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned char if_down; /* brind down interface when disconnected */
- unsigned char gateway; /* Is this interface a gateway */
- unsigned char true_if_encoding; /* Set the dev->type to true board protocol */
-
- unsigned char asy_data_trans; /* async API options */
- unsigned char rts_hs_for_receive; /* async Protocol options */
- unsigned char xon_xoff_hs_for_receive;
- unsigned char xon_xoff_hs_for_transmit;
- unsigned char dcd_hs_for_transmit;
- unsigned char cts_hs_for_transmit;
- unsigned char async_mode;
- unsigned tx_bits_per_char;
- unsigned rx_bits_per_char;
- unsigned stop_bits;
- unsigned char parity;
- unsigned break_timer;
- unsigned inter_char_timer;
- unsigned rx_complete_length;
- unsigned xon_char;
- unsigned xoff_char;
- unsigned char receive_only; /* no transmit buffering (Y/N) */
-} wanif_conf_t;
+#include <uapi/linux/wanrouter.h>
-#ifdef __KERNEL__
/****** Kernel Interface ****************************************************/
#include <linux/fs.h> /* support for device drivers */
@@ -528,5 +126,4 @@ extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long a
/* list of registered devices */
extern struct wan_device *wanrouter_router_devlist;
-#endif /* __KERNEL__ */
#endif /* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index da70f0f..b7f45d4 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -5,59 +5,14 @@
* by Ken Hollis <khollis@bitgate.com>
*
*/
-
#ifndef _LINUX_WATCHDOG_H
#define _LINUX_WATCHDOG_H
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define WATCHDOG_IOCTL_BASE 'W'
-
-struct watchdog_info {
- __u32 options; /* Options the card/driver supports */
- __u32 firmware_version; /* Firmware version of the card */
- __u8 identity[32]; /* Identity of the board */
-};
-
-#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define WDIOF_UNKNOWN -1 /* Unknown flag error */
-#define WDIOS_UNKNOWN -1 /* Unknown status error */
-
-#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */
-#define WDIOF_FANFAULT 0x0002 /* Fan failed */
-#define WDIOF_EXTERN1 0x0004 /* External relay 1 */
-#define WDIOF_EXTERN2 0x0008 /* External relay 2 */
-#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */
-#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */
-#define WDIOF_POWEROVER 0x0040 /* Power over voltage */
-#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */
-#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */
-#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */
-#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or
- other external alarm not a reboot */
-#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */
-
-#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */
-#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */
-#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/cdev.h>
+#include <uapi/linux/watchdog.h>
struct watchdog_ops;
struct watchdog_device;
@@ -178,6 +133,4 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
extern int watchdog_register_device(struct watchdog_device *);
extern void watchdog_unregister_device(struct watchdog_device *);
-#endif /* __KERNEL__ */
-
#endif /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
deleted file mode 100644
index 9f6b77a..0000000
--- a/include/linux/wimax.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Linux WiMax
- * API for user space
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - Initial implementation
- *
- *
- * This file declares the user/kernel protocol that is spoken over
- * Generic Netlink, as well as any type declaration that is to be used
- * by kernel and user space.
- *
- * It is intended for user space to clone it verbatim to use it as a
- * primary reference for definitions.
- *
- * Stuff intended for kernel usage as well as full protocol and stack
- * documentation is rooted in include/net/wimax.h.
- */
-
-#ifndef __LINUX__WIMAX_H__
-#define __LINUX__WIMAX_H__
-
-#include <linux/types.h>
-
-enum {
- /**
- * Version of the interface (unsigned decimal, MMm, max 25.5)
- * M - Major: change if removing or modifying an existing call.
- * m - minor: change when adding a new call
- */
- WIMAX_GNL_VERSION = 01,
- /* Generic NetLink attributes */
- WIMAX_GNL_ATTR_INVALID = 0x00,
- WIMAX_GNL_ATTR_MAX = 10,
-};
-
-
-/*
- * Generic NetLink operations
- *
- * Most of these map to an API call; _OP_ stands for operation, _RP_
- * for reply and _RE_ for report (aka: signal).
- */
-enum {
- WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */
- WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */
- WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */
- WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */
- WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */
- WIMAX_GNL_OP_STATE_GET, /* Request for current state */
-};
-
-
-/* Message from user / to user */
-enum {
- WIMAX_GNL_MSG_IFIDX = 1,
- WIMAX_GNL_MSG_PIPE_NAME,
- WIMAX_GNL_MSG_DATA,
-};
-
-
-/*
- * wimax_rfkill()
- *
- * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
- * switch state (DISABLED/ENABLED).
- */
-enum wimax_rf_state {
- WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */
- WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */
- WIMAX_RF_QUERY = 2,
-};
-
-/* Attributes */
-enum {
- WIMAX_GNL_RFKILL_IFIDX = 1,
- WIMAX_GNL_RFKILL_STATE,
-};
-
-
-/* Attributes for wimax_reset() */
-enum {
- WIMAX_GNL_RESET_IFIDX = 1,
-};
-
-/* Attributes for wimax_state_get() */
-enum {
- WIMAX_GNL_STGET_IFIDX = 1,
-};
-
-/*
- * Attributes for the Report State Change
- *
- * For now we just have the old and new states; new attributes might
- * be added later on.
- */
-enum {
- WIMAX_GNL_STCH_IFIDX = 1,
- WIMAX_GNL_STCH_STATE_OLD,
- WIMAX_GNL_STCH_STATE_NEW,
-};
-
-
-/**
- * enum wimax_st - The different states of a WiMAX device
- * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
- * but still wimax_dev_add() hasn't been called. There is no state.
- *
- * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
- * networking stacks, but it is not initialized (normally that is
- * done with 'ifconfig DEV up' [or equivalent], which can upload
- * firmware and enable communications with the device).
- * In this state, the device is powered down and using as less
- * power as possible.
- * This state is the default after a call to wimax_dev_add(). It
- * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
- * or %WIMAX_ST_RADIO_OFF in _probe() after the call to
- * wimax_dev_add().
- * It is recommended that the driver leaves this state when
- * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
- * down'.
- *
- * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
- * operations are allowed to proceed except the ones needed to
- * complete the device clean up process.
- *
- * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
- * is setup, but the device still requires some configuration
- * before being operational.
- * Some WiMAX API calls might work.
- *
- * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
- * by hardware or software switches).
- * It is recommended to always leave the device in this state
- * after initialization.
- *
- * @WIMAX_ST_READY: The device is fully up and radio is on.
- *
- * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
- * scan. In this state, the device cannot be actively connected to
- * a network.
- *
- * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
- * state exists because in some devices, the connect process can
- * include a number of negotiations between user space, kernel
- * space and the device. User space needs to know what the device
- * is doing. If the connect sequence in a device is atomic and
- * fast, the device can transition directly to CONNECTED
- *
- * @WIMAX_ST_CONNECTED: The device is connected to a network.
- *
- * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
- * maximum numeric value of states.
- *
- * Description:
- *
- * Transitions from one state to another one are atomic and can only
- * be caused in kernel space with wimax_state_change(). To read the
- * state, use wimax_state_get().
- *
- * States starting with __ are internal and shall not be used or
- * referred to by drivers or userspace. They look ugly, but that's the
- * point -- if any use is made non-internal to the stack, it is easier
- * to catch on review.
- *
- * All API operations [with well defined exceptions] will take the
- * device mutex before starting and then check the state. If the state
- * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
- * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
- * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
- *
- * The order of the definitions is important, so we can do numerical
- * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
- * to operate).
- */
-/*
- * The allowed state transitions are described in the table below
- * (states in rows can go to states in columns where there is an X):
- *
- * UNINI RADIO READY SCAN CONNEC CONNEC
- * NULL DOWN QUIESCING TIALIZED OFF NING TING TED
- * NULL - x
- * DOWN - x x x
- * QUIESCING x -
- * UNINITIALIZED x - x
- * RADIO_OFF x - x
- * READY x x - x x x
- * SCANNING x x x - x x
- * CONNECTING x x x x - x
- * CONNECTED x x x -
- *
- * This table not available in kernel-doc because the formatting messes it up.
- */
- enum wimax_st {
- __WIMAX_ST_NULL = 0,
- WIMAX_ST_DOWN,
- __WIMAX_ST_QUIESCING,
- WIMAX_ST_UNINITIALIZED,
- WIMAX_ST_RADIO_OFF,
- WIMAX_ST_READY,
- WIMAX_ST_SCANNING,
- WIMAX_ST_CONNECTING,
- WIMAX_ST_CONNECTED,
- __WIMAX_ST_INVALID /* Always keep last */
-};
-
-
-#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 4395b28..4ea4c6e 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -6,690 +6,11 @@
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
* Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
*/
-
#ifndef _LINUX_WIRELESS_H
#define _LINUX_WIRELESS_H
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands. This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- * # net/core/dev.c (two place + add include)
- * # net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- * # net/core/dev.c (two other places)
- * # include/linux/netdevice.h (one place)
- * # include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- * # include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- * # net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- * # net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h> /* for __u* and __s* typedefs */
-#include <linux/socket.h> /* for "struct sockaddr" et al */
-#include <linux/if.h> /* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT 22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- * Alan Cox start some incompatibles changes. I've integrated a bit more.
- * - Encryption renamed to Encode to avoid US regulation problems
- * - Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- * - Add sensitivity
- *
- * V4 to V5
- * --------
- * - Missing encoding definitions in range
- * - Access points stuff
- *
- * V5 to V6
- * --------
- * - 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- * - Changed my e-mail address
- * - More 802.11 support (nickname, rate, rts, frag)
- * - List index in frequencies
- *
- * V8 to V9
- * --------
- * - Support for 'mode of operation' (ad-hoc, managed...)
- * - Support for unicast and multicast power saving
- * - Change encoding to support larger tokens (>64 bits)
- * - Updated iw_params (disable, flags) and use it for NWID
- * - Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- * - Add PM capability to range structure
- * - Add PM modifier : MAX/MIN/RELATIVE
- * - Add encoding option : IW_ENCODE_NOKEY
- * - Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- * - Add WE version in range (help backward/forward compatibility)
- * - Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
- * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- * - Add new statistics (frag, retry, beacon)
- * - Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- * - Document creation of new driver API.
- * - Extract union iwreq_data from struct iwreq (for new driver API).
- * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- * - Wireless Events support : define struct iw_event
- * - Define additional specific event numbers
- * - Add "addr" and "param" fields in union iwreq_data
- * - AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- * - Make struct iw_freq signed (both m & e), add explicit padding
- * - Add IWEVCUSTOM for driver specific event/scanning token
- * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
- * - Add IW_TXPOW_RANGE for range of Tx Powers
- * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- * - Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
- * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- * - Reshuffle struct iw_range for increases, add filler
- * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- * - Add flags to frequency -> auto/fixed
- * - Document (struct iw_quality *)->updated, add new flags (INVALID)
- * - Wireless Event capability in struct iw_range
- * - Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- * - Add support for WPA/WPA2
- * - Add extended encoding configuration (SIOCSIWENCODEEXT and
- * SIOCGIWENCODEEXT)
- * - Add SIOCSIWGENIE/SIOCGIWGENIE
- * - Add SIOCSIWMLME
- * - Add SIOCSIWPMKSA
- * - Add struct iw_range bit field for supported encoding capabilities
- * - Add optional scan request parameters for SIOCSIWSCAN
- * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- * related parameters (extensible up to 4096 parameter values)
- * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- * - Remove (struct iw_point *)->pointer from events and streams
- * - Remove header includes to help user space
- * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- * - RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- * - Remove (struct net_device *)->get_wireless_stats()
- * - Change length in ESSID and NICK to strlen() instead of strlen()+1
- * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- * - Power/Retry relative values no longer * 100000
- * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- * - Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
-#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
-#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
-#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
-#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
-#define SIOCSIWMODE 0x8B06 /* set operation mode */
-#define SIOCGIWMODE 0x8B07 /* get operation mode */
-#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
-#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE 0x8B0A /* Unused */
-#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
-#define SIOCSIWPRIV 0x8B0C /* Unused */
-#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
-#define SIOCSIWSTATS 0x8B0E /* Unused */
-#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY 0x8B10 /* set spy addresses */
-#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
-#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
-#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
-#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
-#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
-#define SIOCGIWSCAN 0x8B19 /* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
-#define SIOCGIWESSID 0x8B1B /* get ESSID */
-#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
-#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
-#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
-#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
-#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
-#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
-#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
-#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
-#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE 0x8B30 /* set generic IE */
-#define SIOCGIWGENIE 0x8B31 /* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
- * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
-#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV 0x8BE0
-#define SIOCIWLASTPRIV 0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST 0x8B00
-#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
-#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func) \
- [IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd) (!((cmd) & 0x1))
-#define IW_IS_GET(cmd) ((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
-#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
-#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
-#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
-#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
-#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
- * (scan results); This includes id and
- * length fields. One IWEVGENIE may
- * contain more than one IE. Scan
- * results may contain one or more
- * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
- * (struct iw_michaelmicfailure)
- */
-#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
- * The data includes id and length
- * fields and may contain more than one
- * IE. This event is required in
- * Managed mode if the driver
- * generates its own WPA/RSN IE. This
- * should be sent just before
- * IWEVREGISTERED event for the
- * association. */
-#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
- * Response. The data includes id and
- * length fields and may contain more
- * than one IE. This may be sent
- * between IWEVASSOCREQIE and
- * IWEVREGISTERED events for the
- * association. */
-#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
- * pre-authentication
- * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST 0x8C00
-#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
-#define IW_PRIV_TYPE_NONE 0x0000
-#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
-#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
-#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES 32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES 32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER 8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY 8
-
-/* Maximum of address that you may get in the
- list of access points in range */
-#define IW_MAX_AP 64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE 32
-
-/* Modes of operation */
-#define IW_MODE_AUTO 0 /* Let the driver decides */
-#define IW_MODE_ADHOC 1 /* Single cell network */
-#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
-#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED 0x02
-#define IW_QUAL_NOISE_UPDATED 0x04
-#define IW_QUAL_ALL_UPDATED 0x07
-#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID 0x20
-#define IW_QUAL_NOISE_INVALID 0x40
-#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID 0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO 0x00 /* Let the driver decides */
-#define IW_FREQ_FIXED 0x01 /* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES 8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
-#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
-#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
-#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
-#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
-#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
-#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON 0x0000 /* No details... */
-#define IW_POWER_TYPE 0xF000 /* Type of parameter */
-#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
-#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE 0x0F00 /* Power Management mode */
-#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
-#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
-#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
-#define IW_POWER_MIN 0x0001 /* Value is a minimum */
-#define IW_POWER_MAX 0x0002 /* Value is a maximum */
-#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE 0x00FF /* Type of value */
-#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
-#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
-#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */
-#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON 0x0000 /* No details... */
-#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
-#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
-#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */
-#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
-#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
-#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */
-#define IW_RETRY_LONG 0x0020 /* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
-#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
-#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA 4096 /* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE 0x00
-#define IW_SCAN_CAPA_ESSID 0x01
-#define IW_SCAN_CAPA_BSSID 0x02
-#define IW_SCAN_CAPA_CHANNEL 0x04
-#define IW_SCAN_CAPA_MODE 0x08
-#define IW_SCAN_CAPA_RATE 0x10
-#define IW_SCAN_CAPA_TYPE 0x20
-#define IW_SCAN_CAPA_TIME 0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX 256 /* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX 1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH 0
-#define IW_MLME_DISASSOC 1
-#define IW_MLME_AUTH 2
-#define IW_MLME_ASSOC 3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX 0x0FFF
-#define IW_AUTH_FLAGS 0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION 0
-#define IW_AUTH_CIPHER_PAIRWISE 1
-#define IW_AUTH_CIPHER_GROUP 2
-#define IW_AUTH_KEY_MGMT 3
-#define IW_AUTH_TKIP_COUNTERMEASURES 4
-#define IW_AUTH_DROP_UNENCRYPTED 5
-#define IW_AUTH_80211_AUTH_ALG 6
-#define IW_AUTH_WPA_ENABLED 7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
-#define IW_AUTH_ROAMING_CONTROL 9
-#define IW_AUTH_PRIVACY_INVOKED 10
-#define IW_AUTH_CIPHER_GROUP_MGMT 11
-#define IW_AUTH_MFP 12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
-#define IW_AUTH_WPA_VERSION_WPA 0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE 0x00000001
-#define IW_AUTH_CIPHER_WEP40 0x00000002
-#define IW_AUTH_CIPHER_TKIP 0x00000004
-#define IW_AUTH_CIPHER_CCMP 0x00000008
-#define IW_AUTH_CIPHER_WEP104 0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC 0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X 1
-#define IW_AUTH_KEY_MGMT_PSK 2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
-#define IW_AUTH_ALG_SHARED_KEY 0x00000002
-#define IW_AUTH_ALG_LEAP 0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
- * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */
-#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE 8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE 0
-#define IW_ENCODE_ALG_WEP 1
-#define IW_ENCODE_ALG_TKIP 2
-#define IW_ENCODE_ALG_CCMP 3
-#define IW_ENCODE_ALG_PMK 4
-#define IW_ENCODE_ALG_AES_CMAC 5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP 0x00000004
-#define IW_MICFAILURE_PAIRWISE 0x00000008
-#define IW_MICFAILURE_STAKEY 0x00000010
-#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
- */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA 0x00000001
-#define IW_ENC_CAPA_WPA2 0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \
- (cmd - SIOCIWFIRSTPRIV + 0x60) : \
- (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \
- IW_EVENT_CAPA_MASK(0x8B06) | \
- IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- * Generic format for most parameters that fit in an int
- */
-struct iw_param
-{
- __s32 value; /* The value of the parameter itself */
- __u8 fixed; /* Hardware should not use auto select */
- __u8 disabled; /* Disable the feature */
- __u16 flags; /* Various specifc flags (if any) */
-};
-
-/*
- * For all data larger than 16 octets, we need to use a
- * pointer to memory allocated in user space.
- */
-struct iw_point
-{
- void __user *pointer; /* Pointer to the data (in user space) */
- __u16 length; /* number of fields or size in bytes */
- __u16 flags; /* Optional params */
-};
+#include <uapi/linux/wireless.h>
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -700,432 +21,6 @@ struct compat_iw_point {
__u16 flags;
};
#endif
-#endif
-
-/*
- * A frequency
- * For numbers lower than 10^9, we encode the number in 'm' and
- * set 'e' to 0
- * For number greater than 10^9, we divide it by the lowest power
- * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- * The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct iw_freq
-{
- __s32 m; /* Mantissa */
- __s16 e; /* Exponent */
- __u8 i; /* List index (when in range struct) */
- __u8 flags; /* Flags (fixed/auto) */
-};
-
-/*
- * Quality of the link
- */
-struct iw_quality
-{
- __u8 qual; /* link quality (%retries, SNR,
- %missed beacons or better...) */
- __u8 level; /* signal level (dBm) */
- __u8 noise; /* noise level (dBm) */
- __u8 updated; /* Flags to know if updated */
-};
-
-/*
- * Packet discarded in the wireless adapter due to
- * "wireless" specific problems...
- * Note : the list of counter and statistics in net_device_stats
- * is already pretty exhaustive, and you should use that first.
- * This is only additional stats...
- */
-struct iw_discarded
-{
- __u32 nwid; /* Rx : Wrong nwid/essid */
- __u32 code; /* Rx : Unable to code/decode (WEP) */
- __u32 fragment; /* Rx : Can't perform MAC reassembly */
- __u32 retries; /* Tx : Max MAC retries num reached */
- __u32 misc; /* Others cases */
-};
-
-/*
- * Packet/Time period missed in the wireless adapter due to
- * "wireless" specific problems...
- */
-struct iw_missed
-{
- __u32 beacon; /* Missed beacons/superframe */
-};
-
-/*
- * Quality range (for spy threshold)
- */
-struct iw_thrspy
-{
- struct sockaddr addr; /* Source address (hw/mac) */
- struct iw_quality qual; /* Quality of the link */
- struct iw_quality low; /* Low threshold */
- struct iw_quality high; /* High threshold */
-};
-
-/*
- * Optional data for scan request
- *
- * Note: these optional parameters are controlling parameters for the
- * scanning behavior, these do not apply to getting scan results
- * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- * provide a merged results with all BSSes even if the previous scan
- * request limited scanning to a subset, e.g., by specifying an SSID.
- * Especially, scan results are required to include an entry for the
- * current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct iw_scan_req
-{
- __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
- __u8 essid_len;
- __u8 num_channels; /* num entries in channel_list;
- * 0 = scan all allowed channels */
- __u8 flags; /* reserved as padding; use zero, this may
- * be used in the future for adding flags
- * to request different scan behavior */
- struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
- * individual address of a specific BSS */
-
- /*
- * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
- * the current ESSID. This allows scan requests for specific ESSID
- * without having to change the current ESSID and potentially breaking
- * the current association.
- */
- __u8 essid[IW_ESSID_MAX_SIZE];
-
- /*
- * Optional parameters for changing the default scanning behavior.
- * These are based on the MLME-SCAN.request from IEEE Std 802.11.
- * TU is 1.024 ms. If these are set to 0, driver is expected to use
- * reasonable default values. min_channel_time defines the time that
- * will be used to wait for the first reply on each channel. If no
- * replies are received, next channel will be scanned after this. If
- * replies are received, total time waited on the channel is defined by
- * max_channel_time.
- */
- __u32 min_channel_time; /* in TU */
- __u32 max_channel_time; /* in TU */
-
- struct iw_freq channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- * Extended data structure for get/set encoding (this is used with
- * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- * only the data contents changes (key data -> this structure, including
- * key data).
- *
- * If the new key is the first group key, it will be set as the default
- * TX key. Otherwise, default TX key index is only changed if
- * IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- * Key will be changed with SIOCSIWENCODEEXT in all cases except for
- * special "change TX key index" operation which is indicated by setting
- * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- * tx_seq/rx_seq are only used when respective
- * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- * used only by an Authenticator (AP or an IBSS station) to get the
- * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- * debugging/testing.
- */
-struct iw_encode_ext
-{
- __u32 ext_flags; /* IW_ENCODE_EXT_* */
- __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
- __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
- struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
- * (group) keys or unicast address for
- * individual keys */
- __u16 alg; /* IW_ENCODE_ALG_* */
- __u16 key_len;
- __u8 key[0];
-};
-
-/* SIOCSIWMLME data */
-struct iw_mlme
-{
- __u16 cmd; /* IW_MLME_* */
- __u16 reason_code;
- struct sockaddr addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD 1
-#define IW_PMKSA_REMOVE 2
-#define IW_PMKSA_FLUSH 3
-
-#define IW_PMKID_LEN 16
-
-struct iw_pmksa
-{
- __u32 cmd; /* IW_PMKSA_* */
- struct sockaddr bssid;
- __u8 pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct iw_michaelmicfailure
-{
- __u32 flags;
- struct sockaddr src_addr;
- __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
-struct iw_pmkid_cand
-{
- __u32 flags; /* IW_PMKID_CAND_* */
- __u32 index; /* the smaller the index, the higher the
- * priority */
- struct sockaddr bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct iw_statistics
-{
- __u16 status; /* Status
- * - device dependent for now */
-
- struct iw_quality qual; /* Quality of the link
- * (instant/mean/max) */
- struct iw_discarded discard; /* Packet discarded counts */
- struct iw_missed miss; /* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union iwreq_data
-{
- /* Config - generic */
- char name[IFNAMSIZ];
- /* Name : used to verify the presence of wireless extensions.
- * Name of the protocol/provider... */
-
- struct iw_point essid; /* Extended network name */
- struct iw_param nwid; /* network id (or domain - the cell) */
- struct iw_freq freq; /* frequency or channel :
- * 0-1000 = channel
- * > 1000 = frequency in Hz */
-
- struct iw_param sens; /* signal level threshold */
- struct iw_param bitrate; /* default bit rate */
- struct iw_param txpower; /* default transmit power */
- struct iw_param rts; /* RTS threshold threshold */
- struct iw_param frag; /* Fragmentation threshold */
- __u32 mode; /* Operation mode */
- struct iw_param retry; /* Retry limits & lifetime */
-
- struct iw_point encoding; /* Encoding stuff : tokens */
- struct iw_param power; /* PM duration/timeout */
- struct iw_quality qual; /* Quality part of statistics */
-
- struct sockaddr ap_addr; /* Access point address */
- struct sockaddr addr; /* Destination address (hw/mac) */
-
- struct iw_param param; /* Other small parameters */
- struct iw_point data; /* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct iwreq
-{
- union
- {
- char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */
- } ifr_ifrn;
-
- /* Data part (defined just above) */
- union iwreq_data u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- * For those ioctl which want to exchange mode data that what could
- * fit in the above structure...
- */
-
-/*
- * Range of parameters
- */
-
-struct iw_range
-{
- /* Informative stuff (to choose between different interface) */
- __u32 throughput; /* To give an idea... */
- /* In theory this value should be the maximum benchmarked
- * TCP/IP throughput, because with most of these devices the
- * bit rate is meaningless (overhead an co) to estimate how
- * fast the connection will go and pick the fastest one.
- * I suggest people to play with Netperf or any benchmark...
- */
-
- /* NWID (or domain id) */
- __u32 min_nwid; /* Minimal NWID we are able to set */
- __u32 max_nwid; /* Maximal NWID we are able to set */
-
- /* Old Frequency (backward compat - moved lower ) */
- __u16 old_num_channels;
- __u8 old_num_frequency;
-
- /* Scan capabilities */
- __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */
-
- /* Wireless event capability bitmasks */
- __u32 event_capa[6];
-
- /* signal level threshold range */
- __s32 sensitivity;
-
- /* Quality of link & SNR stuff */
- /* Quality range (link, level, noise)
- * If the quality is absolute, it will be in the range [0 ; max_qual],
- * if the quality is dBm, it will be in the range [max_qual ; 0].
- * Don't forget that we use 8 bit arithmetics... */
- struct iw_quality max_qual; /* Quality of the link */
- /* This should contain the average/typical values of the quality
- * indicator. This should be the threshold between a "good" and
- * a "bad" link (example : monitor going from green to orange).
- * Currently, user space apps like quality monitors don't have any
- * way to calibrate the measurement. With this, they can split
- * the range between 0 and max_qual in different quality level
- * (using a geometric subdivision centered on the average).
- * I expect that people doing the user space apps will feedback
- * us on which value we need to put in each driver... */
- struct iw_quality avg_qual; /* Quality of the link */
-
- /* Rates */
- __u8 num_bitrates; /* Number of entries in the list */
- __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */
-
- /* RTS threshold */
- __s32 min_rts; /* Minimal RTS threshold */
- __s32 max_rts; /* Maximal RTS threshold */
-
- /* Frag threshold */
- __s32 min_frag; /* Minimal frag threshold */
- __s32 max_frag; /* Maximal frag threshold */
-
- /* Power Management duration & timeout */
- __s32 min_pmp; /* Minimal PM period */
- __s32 max_pmp; /* Maximal PM period */
- __s32 min_pmt; /* Minimal PM timeout */
- __s32 max_pmt; /* Maximal PM timeout */
- __u16 pmp_flags; /* How to decode max/min PM period */
- __u16 pmt_flags; /* How to decode max/min PM timeout */
- __u16 pm_capa; /* What PM options are supported */
-
- /* Encoder stuff */
- __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
- __u8 num_encoding_sizes; /* Number of entry in the list */
- __u8 max_encoding_tokens; /* Max number of tokens */
- /* For drivers that need a "login/passwd" form */
- __u8 encoding_login_index; /* token index for login token */
-
- /* Transmit power */
- __u16 txpower_capa; /* What options are supported */
- __u8 num_txpower; /* Number of entries in the list */
- __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */
-
- /* Wireless Extension version info */
- __u8 we_version_compiled; /* Must be WIRELESS_EXT */
- __u8 we_version_source; /* Last update of source */
-
- /* Retry limits and lifetime */
- __u16 retry_capa; /* What retry options are supported */
- __u16 retry_flags; /* How to decode max/min retry limit */
- __u16 r_time_flags; /* How to decode max/min retry life */
- __s32 min_retry; /* Minimal number of retries */
- __s32 max_retry; /* Maximal number of retries */
- __s32 min_r_time; /* Minimal retry lifetime */
- __s32 max_r_time; /* Maximal retry lifetime */
-
- /* Frequency */
- __u16 num_channels; /* Number of channels [0; num - 1] */
- __u8 num_frequency; /* Number of entry in the list */
- struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
- /* Note : this frequency list doesn't need to fit channel numbers,
- * because each entry contain its channel index */
-
- __u32 enc_capa; /* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
-
-struct iw_priv_args
-{
- __u32 cmd; /* Number of the ioctl to issue */
- __u16 set_args; /* Type and number of args */
- __u16 get_args; /* Type and number of args */
- char name[IFNAMSIZ]; /* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
- __u16 len; /* Real length of this stuff */
- __u16 cmd; /* Wireless IOCTL */
- union iwreq_data u; /* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
- (char *) NULL)
-#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
- IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
struct __compat_iw_event {
__u16 len; /* Real length of this stuff */
@@ -1146,17 +41,4 @@ struct __compat_iw_event {
(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
IW_EV_COMPAT_POINT_OFF)
#endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN (4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4)
-
#endif /* _LINUX_WIRELESS_H */
diff --git a/include/linux/x25.h b/include/linux/x25.h
deleted file mode 100644
index 810cce6..0000000
--- a/include/linux/x25.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * These are the public elements of the Linux kernel X.25 implementation.
- *
- * History
- * mar/20/00 Daniela Squassoni Disabling/enabling of facilities
- * negotiation.
- * apr/02/05 Shaun Pereira Selective sub address matching with
- * call user data
- */
-
-#ifndef X25_KERNEL_H
-#define X25_KERNEL_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define SIOCX25GSUBSCRIP (SIOCPROTOPRIVATE + 0)
-#define SIOCX25SSUBSCRIP (SIOCPROTOPRIVATE + 1)
-#define SIOCX25GFACILITIES (SIOCPROTOPRIVATE + 2)
-#define SIOCX25SFACILITIES (SIOCPROTOPRIVATE + 3)
-#define SIOCX25GCALLUSERDATA (SIOCPROTOPRIVATE + 4)
-#define SIOCX25SCALLUSERDATA (SIOCPROTOPRIVATE + 5)
-#define SIOCX25GCAUSEDIAG (SIOCPROTOPRIVATE + 6)
-#define SIOCX25SCUDMATCHLEN (SIOCPROTOPRIVATE + 7)
-#define SIOCX25CALLACCPTAPPRV (SIOCPROTOPRIVATE + 8)
-#define SIOCX25SENDCALLACCPT (SIOCPROTOPRIVATE + 9)
-#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
-#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
-#define SIOCX25SCAUSEDIAG (SIOCPROTOPRIVATE + 12)
-
-/*
- * Values for {get,set}sockopt.
- */
-#define X25_QBITINCL 1
-
-/*
- * X.25 Packet Size values.
- */
-#define X25_PS16 4
-#define X25_PS32 5
-#define X25_PS64 6
-#define X25_PS128 7
-#define X25_PS256 8
-#define X25_PS512 9
-#define X25_PS1024 10
-#define X25_PS2048 11
-#define X25_PS4096 12
-
-/*
- * An X.121 address, it is held as ASCII text, null terminated, up to 15
- * digits and a null terminator.
- */
-struct x25_address {
- char x25_addr[16];
-};
-
-/*
- * Linux X.25 Address structure, used for bind, and connect mostly.
- */
-struct sockaddr_x25 {
- __kernel_sa_family_t sx25_family; /* Must be AF_X25 */
- struct x25_address sx25_addr; /* X.121 Address */
-};
-
-/*
- * DTE/DCE subscription options.
- *
- * As this is missing lots of options, user should expect major
- * changes of this structure in 2.5.x which might break compatibilty.
- * The somewhat ugly dimension 200-sizeof() is needed to maintain
- * backward compatibility.
- */
-struct x25_subscrip_struct {
- char device[200-sizeof(unsigned long)];
- unsigned long global_facil_mask; /* 0 to disable negotiation */
- unsigned int extended;
-};
-
-/* values for above global_facil_mask */
-
-#define X25_MASK_REVERSE 0x01
-#define X25_MASK_THROUGHPUT 0x02
-#define X25_MASK_PACKET_SIZE 0x04
-#define X25_MASK_WINDOW_SIZE 0x08
-
-#define X25_MASK_CALLING_AE 0x10
-#define X25_MASK_CALLED_AE 0x20
-
-
-/*
- * Routing table control structure.
- */
-struct x25_route_struct {
- struct x25_address address;
- unsigned int sigdigits;
- char device[200];
-};
-
-/*
- * Facilities structure.
- */
-struct x25_facilities {
- unsigned int winsize_in, winsize_out;
- unsigned int pacsize_in, pacsize_out;
- unsigned int throughput;
- unsigned int reverse;
-};
-
-/*
-* ITU DTE facilities
-* Only the called and calling address
-* extension are currently implemented.
-* The rest are in place to avoid the struct
-* changing size if someone needs them later
-*/
-
-struct x25_dte_facilities {
- __u16 delay_cumul;
- __u16 delay_target;
- __u16 delay_max;
- __u8 min_throughput;
- __u8 expedited;
- __u8 calling_len;
- __u8 called_len;
- __u8 calling_ae[20];
- __u8 called_ae[20];
-};
-
-/*
- * Call User Data structure.
- */
-struct x25_calluserdata {
- unsigned int cudlength;
- unsigned char cuddata[128];
-};
-
-/*
- * Call clearing Cause and Diagnostic structure.
- */
-struct x25_causediag {
- unsigned char cause;
- unsigned char diagnostic;
-};
-
-/*
- * Further optional call user data match length selection
- */
-struct x25_subaddr {
- unsigned int cudmatchlength;
-};
-
-#endif
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index cc13e11..fdbafc6 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -10,61 +10,11 @@
#ifndef _LINUX_XATTR_H
#define _LINUX_XATTR_H
-#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */
-#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX "security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_IMA_SUFFIX "ima"
-#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef __KERNEL__
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/spinlock.h>
+#include <uapi/linux/xattr.h>
struct inode;
struct dentry;
@@ -147,6 +97,4 @@ ssize_t simple_xattr_list(struct simple_xattrs *xattrs, char *buffer,
void simple_xattr_list_add(struct simple_xattrs *xattrs,
struct simple_xattr *new_xattr);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
deleted file mode 100644
index 28e493b..0000000
--- a/include/linux/xfrm.h
+++ /dev/null
@@ -1,506 +0,0 @@
-#ifndef _LINUX_XFRM_H
-#define _LINUX_XFRM_H
-
-#include <linux/types.h>
-
-/* All of the structures in this file may not change size as they are
- * passed into the kernel from userspace via netlink sockets.
- */
-
-/* Structure to encapsulate addresses. I do not want to use
- * "standard" structure. My apologies.
- */
-typedef union {
- __be32 a4;
- __be32 a6[4];
-} xfrm_address_t;
-
-/* Ident of a specific xfrm_state. It is used on input to lookup
- * the state by (spi,daddr,ah/esp) or to store information about
- * spi, protocol and tunnel address on output.
- */
-struct xfrm_id {
- xfrm_address_t daddr;
- __be32 spi;
- __u8 proto;
-};
-
-struct xfrm_sec_ctx {
- __u8 ctx_doi;
- __u8 ctx_alg;
- __u16 ctx_len;
- __u32 ctx_sid;
- char ctx_str[0];
-};
-
-/* Security Context Domains of Interpretation */
-#define XFRM_SC_DOI_RESERVED 0
-#define XFRM_SC_DOI_LSM 1
-
-/* Security Context Algorithms */
-#define XFRM_SC_ALG_RESERVED 0
-#define XFRM_SC_ALG_SELINUX 1
-
-/* Selector, used as selector both on policy rules (SPD) and SAs. */
-
-struct xfrm_selector {
- xfrm_address_t daddr;
- xfrm_address_t saddr;
- __be16 dport;
- __be16 dport_mask;
- __be16 sport;
- __be16 sport_mask;
- __u16 family;
- __u8 prefixlen_d;
- __u8 prefixlen_s;
- __u8 proto;
- int ifindex;
- __kernel_uid32_t user;
-};
-
-#define XFRM_INF (~(__u64)0)
-
-struct xfrm_lifetime_cfg {
- __u64 soft_byte_limit;
- __u64 hard_byte_limit;
- __u64 soft_packet_limit;
- __u64 hard_packet_limit;
- __u64 soft_add_expires_seconds;
- __u64 hard_add_expires_seconds;
- __u64 soft_use_expires_seconds;
- __u64 hard_use_expires_seconds;
-};
-
-struct xfrm_lifetime_cur {
- __u64 bytes;
- __u64 packets;
- __u64 add_time;
- __u64 use_time;
-};
-
-struct xfrm_replay_state {
- __u32 oseq;
- __u32 seq;
- __u32 bitmap;
-};
-
-#define XFRMA_REPLAY_ESN_MAX 4096
-
-struct xfrm_replay_state_esn {
- unsigned int bmp_len;
- __u32 oseq;
- __u32 seq;
- __u32 oseq_hi;
- __u32 seq_hi;
- __u32 replay_window;
- __u32 bmp[0];
-};
-
-struct xfrm_algo {
- char alg_name[64];
- unsigned int alg_key_len; /* in bits */
- char alg_key[0];
-};
-
-struct xfrm_algo_auth {
- char alg_name[64];
- unsigned int alg_key_len; /* in bits */
- unsigned int alg_trunc_len; /* in bits */
- char alg_key[0];
-};
-
-struct xfrm_algo_aead {
- char alg_name[64];
- unsigned int alg_key_len; /* in bits */
- unsigned int alg_icv_len; /* in bits */
- char alg_key[0];
-};
-
-struct xfrm_stats {
- __u32 replay_window;
- __u32 replay;
- __u32 integrity_failed;
-};
-
-enum {
- XFRM_POLICY_TYPE_MAIN = 0,
- XFRM_POLICY_TYPE_SUB = 1,
- XFRM_POLICY_TYPE_MAX = 2,
- XFRM_POLICY_TYPE_ANY = 255
-};
-
-enum {
- XFRM_POLICY_IN = 0,
- XFRM_POLICY_OUT = 1,
- XFRM_POLICY_FWD = 2,
- XFRM_POLICY_MASK = 3,
- XFRM_POLICY_MAX = 3
-};
-
-enum {
- XFRM_SHARE_ANY, /* No limitations */
- XFRM_SHARE_SESSION, /* For this session only */
- XFRM_SHARE_USER, /* For this user only */
- XFRM_SHARE_UNIQUE /* Use once */
-};
-
-#define XFRM_MODE_TRANSPORT 0
-#define XFRM_MODE_TUNNEL 1
-#define XFRM_MODE_ROUTEOPTIMIZATION 2
-#define XFRM_MODE_IN_TRIGGER 3
-#define XFRM_MODE_BEET 4
-#define XFRM_MODE_MAX 5
-
-/* Netlink configuration messages. */
-enum {
- XFRM_MSG_BASE = 0x10,
-
- XFRM_MSG_NEWSA = 0x10,
-#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
- XFRM_MSG_DELSA,
-#define XFRM_MSG_DELSA XFRM_MSG_DELSA
- XFRM_MSG_GETSA,
-#define XFRM_MSG_GETSA XFRM_MSG_GETSA
-
- XFRM_MSG_NEWPOLICY,
-#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
- XFRM_MSG_DELPOLICY,
-#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
- XFRM_MSG_GETPOLICY,
-#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
-
- XFRM_MSG_ALLOCSPI,
-#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
- XFRM_MSG_ACQUIRE,
-#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
- XFRM_MSG_EXPIRE,
-#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
-
- XFRM_MSG_UPDPOLICY,
-#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
- XFRM_MSG_UPDSA,
-#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
-
- XFRM_MSG_POLEXPIRE,
-#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
-
- XFRM_MSG_FLUSHSA,
-#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
- XFRM_MSG_FLUSHPOLICY,
-#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
-
- XFRM_MSG_NEWAE,
-#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE
- XFRM_MSG_GETAE,
-#define XFRM_MSG_GETAE XFRM_MSG_GETAE
-
- XFRM_MSG_REPORT,
-#define XFRM_MSG_REPORT XFRM_MSG_REPORT
-
- XFRM_MSG_MIGRATE,
-#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE
-
- XFRM_MSG_NEWSADINFO,
-#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO
- XFRM_MSG_GETSADINFO,
-#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO
-
- XFRM_MSG_NEWSPDINFO,
-#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
- XFRM_MSG_GETSPDINFO,
-#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
-
- XFRM_MSG_MAPPING,
-#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
- __XFRM_MSG_MAX
-};
-#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
-
-#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE)
-
-/*
- * Generic LSM security context for comunicating to user space
- * NOTE: Same format as sadb_x_sec_ctx
- */
-struct xfrm_user_sec_ctx {
- __u16 len;
- __u16 exttype;
- __u8 ctx_alg; /* LSMs: e.g., selinux == 1 */
- __u8 ctx_doi;
- __u16 ctx_len;
-};
-
-struct xfrm_user_tmpl {
- struct xfrm_id id;
- __u16 family;
- xfrm_address_t saddr;
- __u32 reqid;
- __u8 mode;
- __u8 share;
- __u8 optional;
- __u32 aalgos;
- __u32 ealgos;
- __u32 calgos;
-};
-
-struct xfrm_encap_tmpl {
- __u16 encap_type;
- __be16 encap_sport;
- __be16 encap_dport;
- xfrm_address_t encap_oa;
-};
-
-/* AEVENT flags */
-enum xfrm_ae_ftype_t {
- XFRM_AE_UNSPEC,
- XFRM_AE_RTHR=1, /* replay threshold*/
- XFRM_AE_RVAL=2, /* replay value */
- XFRM_AE_LVAL=4, /* lifetime value */
- XFRM_AE_ETHR=8, /* expiry timer threshold */
- XFRM_AE_CR=16, /* Event cause is replay update */
- XFRM_AE_CE=32, /* Event cause is timer expiry */
- XFRM_AE_CU=64, /* Event cause is policy update */
- __XFRM_AE_MAX
-
-#define XFRM_AE_MAX (__XFRM_AE_MAX - 1)
-};
-
-struct xfrm_userpolicy_type {
- __u8 type;
- __u16 reserved1;
- __u8 reserved2;
-};
-
-/* Netlink message attributes. */
-enum xfrm_attr_type_t {
- XFRMA_UNSPEC,
- XFRMA_ALG_AUTH, /* struct xfrm_algo */
- XFRMA_ALG_CRYPT, /* struct xfrm_algo */
- XFRMA_ALG_COMP, /* struct xfrm_algo */
- XFRMA_ENCAP, /* struct xfrm_algo + struct xfrm_encap_tmpl */
- XFRMA_TMPL, /* 1 or more struct xfrm_user_tmpl */
- XFRMA_SA, /* struct xfrm_usersa_info */
- XFRMA_POLICY, /*struct xfrm_userpolicy_info */
- XFRMA_SEC_CTX, /* struct xfrm_sec_ctx */
- XFRMA_LTIME_VAL,
- XFRMA_REPLAY_VAL,
- XFRMA_REPLAY_THRESH,
- XFRMA_ETIMER_THRESH,
- XFRMA_SRCADDR, /* xfrm_address_t */
- XFRMA_COADDR, /* xfrm_address_t */
- XFRMA_LASTUSED, /* unsigned long */
- XFRMA_POLICY_TYPE, /* struct xfrm_userpolicy_type */
- XFRMA_MIGRATE,
- XFRMA_ALG_AEAD, /* struct xfrm_algo_aead */
- XFRMA_KMADDRESS, /* struct xfrm_user_kmaddress */
- XFRMA_ALG_AUTH_TRUNC, /* struct xfrm_algo_auth */
- XFRMA_MARK, /* struct xfrm_mark */
- XFRMA_TFCPAD, /* __u32 */
- XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */
- __XFRMA_MAX
-
-#define XFRMA_MAX (__XFRMA_MAX - 1)
-};
-
-struct xfrm_mark {
- __u32 v; /* value */
- __u32 m; /* mask */
-};
-
-enum xfrm_sadattr_type_t {
- XFRMA_SAD_UNSPEC,
- XFRMA_SAD_CNT,
- XFRMA_SAD_HINFO,
- __XFRMA_SAD_MAX
-
-#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1)
-};
-
-struct xfrmu_sadhinfo {
- __u32 sadhcnt; /* current hash bkts */
- __u32 sadhmcnt; /* max allowed hash bkts */
-};
-
-enum xfrm_spdattr_type_t {
- XFRMA_SPD_UNSPEC,
- XFRMA_SPD_INFO,
- XFRMA_SPD_HINFO,
- __XFRMA_SPD_MAX
-
-#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
-};
-
-struct xfrmu_spdinfo {
- __u32 incnt;
- __u32 outcnt;
- __u32 fwdcnt;
- __u32 inscnt;
- __u32 outscnt;
- __u32 fwdscnt;
-};
-
-struct xfrmu_spdhinfo {
- __u32 spdhcnt;
- __u32 spdhmcnt;
-};
-
-struct xfrm_usersa_info {
- struct xfrm_selector sel;
- struct xfrm_id id;
- xfrm_address_t saddr;
- struct xfrm_lifetime_cfg lft;
- struct xfrm_lifetime_cur curlft;
- struct xfrm_stats stats;
- __u32 seq;
- __u32 reqid;
- __u16 family;
- __u8 mode; /* XFRM_MODE_xxx */
- __u8 replay_window;
- __u8 flags;
-#define XFRM_STATE_NOECN 1
-#define XFRM_STATE_DECAP_DSCP 2
-#define XFRM_STATE_NOPMTUDISC 4
-#define XFRM_STATE_WILDRECV 8
-#define XFRM_STATE_ICMP 16
-#define XFRM_STATE_AF_UNSPEC 32
-#define XFRM_STATE_ALIGN4 64
-#define XFRM_STATE_ESN 128
-};
-
-struct xfrm_usersa_id {
- xfrm_address_t daddr;
- __be32 spi;
- __u16 family;
- __u8 proto;
-};
-
-struct xfrm_aevent_id {
- struct xfrm_usersa_id sa_id;
- xfrm_address_t saddr;
- __u32 flags;
- __u32 reqid;
-};
-
-struct xfrm_userspi_info {
- struct xfrm_usersa_info info;
- __u32 min;
- __u32 max;
-};
-
-struct xfrm_userpolicy_info {
- struct xfrm_selector sel;
- struct xfrm_lifetime_cfg lft;
- struct xfrm_lifetime_cur curlft;
- __u32 priority;
- __u32 index;
- __u8 dir;
- __u8 action;
-#define XFRM_POLICY_ALLOW 0
-#define XFRM_POLICY_BLOCK 1
- __u8 flags;
-#define XFRM_POLICY_LOCALOK 1 /* Allow user to override global policy */
- /* Automatically expand selector to include matching ICMP payloads. */
-#define XFRM_POLICY_ICMP 2
- __u8 share;
-};
-
-struct xfrm_userpolicy_id {
- struct xfrm_selector sel;
- __u32 index;
- __u8 dir;
-};
-
-struct xfrm_user_acquire {
- struct xfrm_id id;
- xfrm_address_t saddr;
- struct xfrm_selector sel;
- struct xfrm_userpolicy_info policy;
- __u32 aalgos;
- __u32 ealgos;
- __u32 calgos;
- __u32 seq;
-};
-
-struct xfrm_user_expire {
- struct xfrm_usersa_info state;
- __u8 hard;
-};
-
-struct xfrm_user_polexpire {
- struct xfrm_userpolicy_info pol;
- __u8 hard;
-};
-
-struct xfrm_usersa_flush {
- __u8 proto;
-};
-
-struct xfrm_user_report {
- __u8 proto;
- struct xfrm_selector sel;
-};
-
-/* Used by MIGRATE to pass addresses IKE should use to perform
- * SA negotiation with the peer */
-struct xfrm_user_kmaddress {
- xfrm_address_t local;
- xfrm_address_t remote;
- __u32 reserved;
- __u16 family;
-};
-
-struct xfrm_user_migrate {
- xfrm_address_t old_daddr;
- xfrm_address_t old_saddr;
- xfrm_address_t new_daddr;
- xfrm_address_t new_saddr;
- __u8 proto;
- __u8 mode;
- __u16 reserved;
- __u32 reqid;
- __u16 old_family;
- __u16 new_family;
-};
-
-struct xfrm_user_mapping {
- struct xfrm_usersa_id id;
- __u32 reqid;
- xfrm_address_t old_saddr;
- xfrm_address_t new_saddr;
- __be16 old_sport;
- __be16 new_sport;
-};
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define XFRMGRP_ACQUIRE 1
-#define XFRMGRP_EXPIRE 2
-#define XFRMGRP_SA 4
-#define XFRMGRP_POLICY 8
-#define XFRMGRP_REPORT 0x20
-#endif
-
-enum xfrm_nlgroups {
- XFRMNLGRP_NONE,
-#define XFRMNLGRP_NONE XFRMNLGRP_NONE
- XFRMNLGRP_ACQUIRE,
-#define XFRMNLGRP_ACQUIRE XFRMNLGRP_ACQUIRE
- XFRMNLGRP_EXPIRE,
-#define XFRMNLGRP_EXPIRE XFRMNLGRP_EXPIRE
- XFRMNLGRP_SA,
-#define XFRMNLGRP_SA XFRMNLGRP_SA
- XFRMNLGRP_POLICY,
-#define XFRMNLGRP_POLICY XFRMNLGRP_POLICY
- XFRMNLGRP_AEVENTS,
-#define XFRMNLGRP_AEVENTS XFRMNLGRP_AEVENTS
- XFRMNLGRP_REPORT,
-#define XFRMNLGRP_REPORT XFRMNLGRP_REPORT
- XFRMNLGRP_MIGRATE,
-#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE
- XFRMNLGRP_MAPPING,
-#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING
- __XFRMNLGRP_MAX
-};
-#define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1)
-
-#endif /* _LINUX_XFRM_H */
OpenPOWER on IntegriCloud