3 files changed, 65 insertions, 0 deletions
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9ddc866..f8fce35 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -189,6 +189,8 @@
 /* MAX3107 */
 #define PORT_MAX3107	94
 
+/* High Speed UART for Medfield */
+#define PORT_MFD	95
 
 #ifdef __KERNEL__
 
diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h
new file mode 100644
index 0000000..2b071e0
--- /dev/null
+++ b/include/linux/serial_mfd.h
@@ -0,0 +1,47 @@
+#ifndef _SERIAL_MFD_H_
+#define _SERIAL_MFD_H_
+
+/* HW register offset definition */
+#define UART_FOR	0x08
+#define UART_PS		0x0C
+#define UART_MUL	0x0D
+#define UART_DIV	0x0E
+
+#define HSU_GBL_IEN	0x0
+#define HSU_GBL_IST	0x4
+
+#define HSU_GBL_INT_BIT_PORT0	0x0
+#define HSU_GBL_INT_BIT_PORT1	0x1
+#define HSU_GBL_INT_BIT_PORT2	0x2
+#define HSU_GBL_INT_BIT_IRI	0x3
+#define HSU_GBL_INT_BIT_HDLC	0x4
+#define HSU_GBL_INT_BIT_DMA	0x5
+
+#define HSU_GBL_ISR	0x8
+#define HSU_GBL_DMASR	0x400
+#define HSU_GBL_DMAISR	0x404
+
+#define HSU_PORT_REG_OFFSET	0x80
+#define HSU_PORT0_REG_OFFSET	0x80
+#define HSU_PORT1_REG_OFFSET	0x100
+#define HSU_PORT2_REG_OFFSET	0x180
+#define HSU_PORT_REG_LENGTH	0x80
+
+#define HSU_DMA_CHANS_REG_OFFSET	0x500
+#define HSU_DMA_CHANS_REG_LENGTH	0x40
+
+#define HSU_CH_SR		0x0	/* channel status reg */
+#define HSU_CH_CR		0x4	/* control reg */
+#define HSU_CH_DCR		0x8	/* descriptor control reg */
+#define HSU_CH_BSR		0x10	/* max fifo buffer size reg */
+#define HSU_CH_MOTSR		0x14	/* minimum ocp transfer size */
+#define HSU_CH_D0SAR		0x20	/* desc 0 start addr */
+#define HSU_CH_D0TSR		0x24	/* desc 0 transfer size */
+#define HSU_CH_D1SAR		0x28
+#define HSU_CH_D1TSR		0x2C
+#define HSU_CH_D2SAR		0x30
+#define HSU_CH_D2TSR		0x34
+#define HSU_CH_D3SAR		0x38
+#define HSU_CH_D3TSR		0x3C
+
+#endif
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index cf9327c..c7a0ce1 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -221,8 +221,24 @@
 #define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
 #define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
 
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
 
+#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
 
+#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
 
 /*
  * These register definitions are for the 16C950