diff options
Diffstat (limited to 'include/linux/wireless.h')
| -rw-r--r-- | include/linux/wireless.h | 773 |
1 files changed, 773 insertions, 0 deletions
diff --git a/include/linux/wireless.h b/include/linux/wireless.h new file mode 100644 index 0000000..2f51f2b --- /dev/null +++ b/include/linux/wireless.h @@ -0,0 +1,773 @@ +/* + * This file define a set of standard wireless extensions + * + * Version : 17 21.6.04 + * + * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> + * Copyright (c) 1997-2004 Jean Tourrilhes, All Rights Reserved. + */ + +#ifndef _LINUX_WIRELESS_H +#define _LINUX_WIRELESS_H + +/************************** DOCUMENTATION **************************/ +/* + * Initial APIs (1996 -> onward) : + * ----------------------------- + * Basically, the wireless extensions are for now a set of standard ioctl + * call + /proc/net/wireless + * + * The entry /proc/net/wireless give statistics and information on the + * driver. + * This is better than having each driver having its entry because + * its centralised and we may remove the driver module safely. + * + * Ioctl are used to configure the driver and issue commands. This is + * better than command line options of insmod because we may want to + * change dynamically (while the driver is running) some parameters. + * + * The ioctl mechanimsm are copied from standard devices ioctl. + * We have the list of command plus a structure descibing the + * data exchanged... + * Note that to add these ioctl, I was obliged to modify : + * # net/core/dev.c (two place + add include) + * # net/ipv4/af_inet.c (one place + add include) + * + * /proc/net/wireless is a copy of /proc/net/dev. + * We have a structure for data passed from the driver to /proc/net/wireless + * Too add this, I've modified : + * # net/core/dev.c (two other places) + * # include/linux/netdevice.h (one place) + * # include/linux/proc_fs.h (one place) + * + * New driver API (2002 -> onward) : + * ------------------------------- + * This file is only concerned with the user space API and common definitions. + * The new driver API is defined and documented in : + * # include/net/iw_handler.h + * + * Note as well that /proc/net/wireless implementation has now moved in : + * # net/core/wireless.c + * + * Wireless Events (2002 -> onward) : + * -------------------------------- + * Events are defined at the end of this file, and implemented in : + * # net/core/wireless.c + * + * Other comments : + * -------------- + * Do not add here things that are redundant with other mechanisms + * (drivers init, ifconfig, /proc/net/dev, ...) and with are not + * wireless specific. + * + * These wireless extensions are not magic : each driver has to provide + * support for them... + * + * IMPORTANT NOTE : As everything in the kernel, this is very much a + * work in progress. Contact me if you have ideas of improvements... + */ + +/***************************** INCLUDES *****************************/ + +/* To minimise problems in user space, I might remove those headers + * at some point. Jean II */ +#include <linux/types.h> /* for "caddr_t" et al */ +#include <linux/socket.h> /* for "struct sockaddr" et al */ +#include <linux/if.h> /* for IFNAMSIZ and co... */ + +/***************************** VERSION *****************************/ +/* + * This constant is used to know the availability of the wireless + * extensions and to know which version of wireless extensions it is + * (there is some stuff that will be added in the future...) + * I just plan to increment with each new version. + */ +#define WIRELESS_EXT 17 + +/* + * Changes : + * + * V2 to V3 + * -------- + * Alan Cox start some incompatibles changes. I've integrated a bit more. + * - Encryption renamed to Encode to avoid US regulation problems + * - Frequency changed from float to struct to avoid problems on old 386 + * + * V3 to V4 + * -------- + * - Add sensitivity + * + * V4 to V5 + * -------- + * - Missing encoding definitions in range + * - Access points stuff + * + * V5 to V6 + * -------- + * - 802.11 support (ESSID ioctls) + * + * V6 to V7 + * -------- + * - define IW_ESSID_MAX_SIZE and IW_MAX_AP + * + * V7 to V8 + * -------- + * - Changed my e-mail address + * - More 802.11 support (nickname, rate, rts, frag) + * - List index in frequencies + * + * V8 to V9 + * -------- + * - Support for 'mode of operation' (ad-hoc, managed...) + * - Support for unicast and multicast power saving + * - Change encoding to support larger tokens (>64 bits) + * - Updated iw_params (disable, flags) and use it for NWID + * - Extracted iw_point from iwreq for clarity + * + * V9 to V10 + * --------- + * - Add PM capability to range structure + * - Add PM modifier : MAX/MIN/RELATIVE + * - Add encoding option : IW_ENCODE_NOKEY + * - Add TxPower ioctls (work like TxRate) + * + * V10 to V11 + * ---------- + * - Add WE version in range (help backward/forward compatibility) + * - Add retry ioctls (work like PM) + * + * V11 to V12 + * ---------- + * - Add SIOCSIWSTATS to get /proc/net/wireless programatically + * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space + * - Add new statistics (frag, retry, beacon) + * - Add average quality (for user space calibration) + * + * V12 to V13 + * ---------- + * - Document creation of new driver API. + * - Extract union iwreq_data from struct iwreq (for new driver API). + * - Rename SIOCSIWNAME as SIOCSIWCOMMIT + * + * V13 to V14 + * ---------- + * - Wireless Events support : define struct iw_event + * - Define additional specific event numbers + * - Add "addr" and "param" fields in union iwreq_data + * - AP scanning stuff (SIOCSIWSCAN and friends) + * + * V14 to V15 + * ---------- + * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg + * - Make struct iw_freq signed (both m & e), add explicit padding + * - Add IWEVCUSTOM for driver specific event/scanning token + * - Add IW_MAX_GET_SPY for driver returning a lot of addresses + * - Add IW_TXPOW_RANGE for range of Tx Powers + * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points + * - Add IW_MODE_MONITOR for passive monitor + * + * V15 to V16 + * ---------- + * - Increase the number of bitrates in iw_range to 32 (for 802.11g) + * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) + * - Reshuffle struct iw_range for increases, add filler + * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses + * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support + * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" + * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index + * + * V16 to V17 + * ---------- + * - Add flags to frequency -> auto/fixed + * - Document (struct iw_quality *)->updated, add new flags (INVALID) + * - Wireless Event capability in struct iw_range + * - Add support for relative TxPower (yick !) + */ + +/**************************** CONSTANTS ****************************/ + +/* -------------------------- IOCTL LIST -------------------------- */ + +/* Wireless Identification */ +#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ +#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ +/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. + * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... + * Don't put the name of your driver there, it's useless. */ + +/* Basic operations */ +#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ +#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ +#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ +#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ +#define SIOCSIWMODE 0x8B06 /* set operation mode */ +#define SIOCGIWMODE 0x8B07 /* get operation mode */ +#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ +#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ + +/* Informative stuff */ +#define SIOCSIWRANGE 0x8B0A /* Unused */ +#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ +#define SIOCSIWPRIV 0x8B0C /* Unused */ +#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ +#define SIOCSIWSTATS 0x8B0E /* Unused */ +#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ +/* SIOCGIWSTATS is strictly used between user space and the kernel, and + * is never passed to the driver (i.e. the driver will never see it). */ + +/* Spy support (statistics per MAC address - used for Mobile IP support) */ +#define SIOCSIWSPY 0x8B10 /* set spy addresses */ +#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ +#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ +#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ + +/* Access Point manipulation */ +#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ +#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ +#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ +#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ +#define SIOCGIWSCAN 0x8B19 /* get scanning results */ + +/* 802.11 specific support */ +#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ +#define SIOCGIWESSID 0x8B1B /* get ESSID */ +#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ +#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ +/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit + * within the 'iwreq' structure, so we need to use the 'data' member to + * point to a string in user space, like it is done for RANGE... */ + +/* Other parameters useful in 802.11 and some other devices */ +#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ +#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ +#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ +#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ +#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ +#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ +#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ +#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ +#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ +#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ + +/* Encoding stuff (scrambling, hardware security, WEP...) */ +#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ +#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ +/* Power saving stuff (power management, unicast and multicast) */ +#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ +#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ + +/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ + +/* These 32 ioctl are wireless device private, for 16 commands. + * Each driver is free to use them for whatever purpose it chooses, + * however the driver *must* export the description of those ioctls + * with SIOCGIWPRIV and *must* use arguments as defined below. + * If you don't follow those rules, DaveM is going to hate you (reason : + * it make mixed 32/64bit operation impossible). + */ +#define SIOCIWFIRSTPRIV 0x8BE0 +#define SIOCIWLASTPRIV 0x8BFF +/* Previously, we were using SIOCDEVPRIVATE, but we now have our + * separate range because of collisions with other tools such as + * 'mii-tool'. + * We now have 32 commands, so a bit more space ;-). + * Also, all 'odd' commands are only usable by root and don't return the + * content of ifr/iwr to user (but you are not obliged to use the set/get + * convention, just use every other two command). More details in iwpriv.c. + * And I repeat : you are not forced to use them with iwpriv, but you + * must be compliant with it. + */ + +/* ------------------------- IOCTL STUFF ------------------------- */ + +/* The first and the last (range) */ +#define SIOCIWFIRST 0x8B00 +#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ + +/* Even : get (world access), odd : set (root access) */ +#define IW_IS_SET(cmd) (!((cmd) & 0x1)) +#define IW_IS_GET(cmd) ((cmd) & 0x1) + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* Those are *NOT* ioctls, do not issue request on them !!! */ +/* Most events use the same identifier as ioctl requests */ + +#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ +#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ +#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ +#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ +#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ + +#define IWEVFIRST 0x8C00 + +/* ------------------------- PRIVATE INFO ------------------------- */ +/* + * The following is used with SIOCGIWPRIV. It allow a driver to define + * the interface (name, type of data) for its private ioctl. + * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV + */ + +#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ +#define IW_PRIV_TYPE_NONE 0x0000 +#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ +#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ +#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ +#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ +#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ + +#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ + +#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ + +/* + * Note : if the number of args is fixed and the size < 16 octets, + * instead of passing a pointer we will put args in the iwreq struct... + */ + +/* ----------------------- OTHER CONSTANTS ----------------------- */ + +/* Maximum frequencies in the range struct */ +#define IW_MAX_FREQUENCIES 32 +/* Note : if you have something like 80 frequencies, + * don't increase this constant and don't fill the frequency list. + * The user will be able to set by channel anyway... */ + +/* Maximum bit rates in the range struct */ +#define IW_MAX_BITRATES 32 + +/* Maximum tx powers in the range struct */ +#define IW_MAX_TXPOWER 8 +/* Note : if you more than 8 TXPowers, just set the max and min or + * a few of them in the struct iw_range. */ + +/* Maximum of address that you may set with SPY */ +#define IW_MAX_SPY 8 + +/* Maximum of address that you may get in the + list of access points in range */ +#define IW_MAX_AP 64 + +/* Maximum size of the ESSID and NICKN strings */ +#define IW_ESSID_MAX_SIZE 32 + +/* Modes of operation */ +#define IW_MODE_AUTO 0 /* Let the driver decides */ +#define IW_MODE_ADHOC 1 /* Single cell network */ +#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ +#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ +#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ +#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ +#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ + +/* Statistics flags (bitmask in updated) */ +#define IW_QUAL_QUAL_UPDATED 0x1 /* Value was updated since last read */ +#define IW_QUAL_LEVEL_UPDATED 0x2 +#define IW_QUAL_NOISE_UPDATED 0x4 +#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ +#define IW_QUAL_LEVEL_INVALID 0x20 +#define IW_QUAL_NOISE_INVALID 0x40 + +/* Frequency flags */ +#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ +#define IW_FREQ_FIXED 0x01 /* Force a specific value */ + +/* Maximum number of size of encoding token available + * they are listed in the range structure */ +#define IW_MAX_ENCODING_SIZES 8 + +/* Maximum size of the encoding token in bytes */ +#define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */ + +/* Flags for encoding (along with the token) */ +#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ +#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ +#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ +#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ +#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ +#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ +#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ +#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ +#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ + +/* Power management flags available (along with the value, if any) */ +#define IW_POWER_ON 0x0000 /* No details... */ +#define IW_POWER_TYPE 0xF000 /* Type of parameter */ +#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ +#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ +#define IW_POWER_MODE 0x0F00 /* Power Management mode */ +#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ +#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ +#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ +#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ +#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ +#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ +#define IW_POWER_MIN 0x0001 /* Value is a minimum */ +#define IW_POWER_MAX 0x0002 /* Value is a maximum */ +#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ + +/* Transmit Power flags available */ +#define IW_TXPOW_TYPE 0x00FF /* Type of value */ +#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ +#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ +#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ +#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ + +/* Retry limits and lifetime flags available */ +#define IW_RETRY_ON 0x0000 /* No details... */ +#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ +#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ +#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ +#define IW_RETRY_MODIFIER 0x000F /* Modify a parameter */ +#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ +#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ +#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ + +/* Scanning request flags */ +#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ +#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ +#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ +#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ +#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ +#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ +#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ +#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ +#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ +/* Maximum size of returned data */ +#define IW_SCAN_MAX_DATA 4096 /* In bytes */ + +/* Max number of char in custom event - use multiple of them if needed */ +#define IW_CUSTOM_MAX 256 /* In bytes */ + +/* Event capability macros - in (struct iw_range *)->event_capa + * Because we have more than 32 possible events, we use an array of + * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ +#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ + (cmd - SIOCIWFIRSTPRIV + 0x60) : \ + (cmd - SIOCSIWCOMMIT)) +#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) +#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) +/* Event capability constants - event autogenerated by the kernel + * This list is valid for most 802.11 devices, customise as needed... */ +#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ + IW_EVENT_CAPA_MASK(0x8B06) | \ + IW_EVENT_CAPA_MASK(0x8B1A)) +#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) +/* "Easy" macro to set events in iw_range (less efficient) */ +#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) +#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } + + +/****************************** TYPES ******************************/ + +/* --------------------------- SUBTYPES --------------------------- */ +/* + * Generic format for most parameters that fit in an int + */ +struct iw_param +{ + __s32 value; /* The value of the parameter itself */ + __u8 fixed; /* Hardware should not use auto select */ + __u8 disabled; /* Disable the feature */ + __u16 flags; /* Various specifc flags (if any) */ +}; + +/* + * For all data larger than 16 octets, we need to use a + * pointer to memory allocated in user space. + */ +struct iw_point +{ + void __user *pointer; /* Pointer to the data (in user space) */ + __u16 length; /* number of fields or size in bytes */ + __u16 flags; /* Optional params */ +}; + +/* + * A frequency + * For numbers lower than 10^9, we encode the number in 'm' and + * set 'e' to 0 + * For number greater than 10^9, we divide it by the lowest power + * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... + * The power of 10 is in 'e', the result of the division is in 'm'. + */ +struct iw_freq +{ + __s32 m; /* Mantissa */ + __s16 e; /* Exponent */ + __u8 i; /* List index (when in range struct) */ + __u8 flags; /* Flags (fixed/auto) */ +}; + +/* + * Quality of the link + */ +struct iw_quality +{ + __u8 qual; /* link quality (%retries, SNR, + %missed beacons or better...) */ + __u8 level; /* signal level (dBm) */ + __u8 noise; /* noise level (dBm) */ + __u8 updated; /* Flags to know if updated */ +}; + +/* + * Packet discarded in the wireless adapter due to + * "wireless" specific problems... + * Note : the list of counter and statistics in net_device_stats + * is already pretty exhaustive, and you should use that first. + * This is only additional stats... + */ +struct iw_discarded +{ + __u32 nwid; /* Rx : Wrong nwid/essid */ + __u32 code; /* Rx : Unable to code/decode (WEP) */ + __u32 fragment; /* Rx : Can't perform MAC reassembly */ + __u32 retries; /* Tx : Max MAC retries num reached */ + __u32 misc; /* Others cases */ +}; + +/* + * Packet/Time period missed in the wireless adapter due to + * "wireless" specific problems... + */ +struct iw_missed +{ + __u32 beacon; /* Missed beacons/superframe */ +}; + +/* + * Quality range (for spy threshold) + */ +struct iw_thrspy +{ + struct sockaddr addr; /* Source address (hw/mac) */ + struct iw_quality qual; /* Quality of the link */ + struct iw_quality low; /* Low threshold */ + struct iw_quality high; /* High threshold */ +}; + +/* ------------------------ WIRELESS STATS ------------------------ */ +/* + * Wireless statistics (used for /proc/net/wireless) + */ +struct iw_statistics +{ + __u16 status; /* Status + * - device dependent for now */ + + struct iw_quality qual; /* Quality of the link + * (instant/mean/max) */ + struct iw_discarded discard; /* Packet discarded counts */ + struct iw_missed miss; /* Packet missed counts */ +}; + +/* ------------------------ IOCTL REQUEST ------------------------ */ +/* + * This structure defines the payload of an ioctl, and is used + * below. + * + * Note that this structure should fit on the memory footprint + * of iwreq (which is the same as ifreq), which mean a max size of + * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... + * You should check this when increasing the structures defined + * above in this file... + */ +union iwreq_data +{ + /* Config - generic */ + char name[IFNAMSIZ]; + /* Name : used to verify the presence of wireless extensions. + * Name of the protocol/provider... */ + + struct iw_point essid; /* Extended network name */ + struct iw_param nwid; /* network id (or domain - the cell) */ + struct iw_freq freq; /* frequency or channel : + * 0-1000 = channel + * > 1000 = frequency in Hz */ + + struct iw_param sens; /* signal level threshold */ + struct iw_param bitrate; /* default bit rate */ + struct iw_param txpower; /* default transmit power */ + struct iw_param rts; /* RTS threshold threshold */ + struct iw_param frag; /* Fragmentation threshold */ + __u32 mode; /* Operation mode */ + struct iw_param retry; /* Retry limits & lifetime */ + + struct iw_point encoding; /* Encoding stuff : tokens */ + struct iw_param power; /* PM duration/timeout */ + struct iw_quality qual; /* Quality part of statistics */ + + struct sockaddr ap_addr; /* Access point address */ + struct sockaddr addr; /* Destination address (hw/mac) */ + + struct iw_param param; /* Other small parameters */ + struct iw_point data; /* Other large parameters */ +}; + +/* + * The structure to exchange data for ioctl. + * This structure is the same as 'struct ifreq', but (re)defined for + * convenience... + * Do I need to remind you about structure size (32 octets) ? + */ +struct iwreq +{ + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ + } ifr_ifrn; + + /* Data part (defined just above) */ + union iwreq_data u; +}; + +/* -------------------------- IOCTL DATA -------------------------- */ +/* + * For those ioctl which want to exchange mode data that what could + * fit in the above structure... + */ + +/* + * Range of parameters + */ + +struct iw_range +{ + /* Informative stuff (to choose between different interface) */ + __u32 throughput; /* To give an idea... */ + /* In theory this value should be the maximum benchmarked + * TCP/IP throughput, because with most of these devices the + * bit rate is meaningless (overhead an co) to estimate how + * fast the connection will go and pick the fastest one. + * I suggest people to play with Netperf or any benchmark... + */ + + /* NWID (or domain id) */ + __u32 min_nwid; /* Minimal NWID we are able to set */ + __u32 max_nwid; /* Maximal NWID we are able to set */ + + /* Old Frequency (backward compat - moved lower ) */ + __u16 old_num_channels; + __u8 old_num_frequency; + + /* Wireless event capability bitmasks */ + __u32 event_capa[6]; + + /* signal level threshold range */ + __s32 sensitivity; + + /* Quality of link & SNR stuff */ + /* Quality range (link, level, noise) + * If the quality is absolute, it will be in the range [0 ; max_qual], + * if the quality is dBm, it will be in the range [max_qual ; 0]. + * Don't forget that we use 8 bit arithmetics... */ + struct iw_quality max_qual; /* Quality of the link */ + /* This should contain the average/typical values of the quality + * indicator. This should be the threshold between a "good" and + * a "bad" link (example : monitor going from green to orange). + * Currently, user space apps like quality monitors don't have any + * way to calibrate the measurement. With this, they can split + * the range between 0 and max_qual in different quality level + * (using a geometric subdivision centered on the average). + * I expect that people doing the user space apps will feedback + * us on which value we need to put in each driver... */ + struct iw_quality avg_qual; /* Quality of the link */ + + /* Rates */ + __u8 num_bitrates; /* Number of entries in the list */ + __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ + + /* RTS threshold */ + __s32 min_rts; /* Minimal RTS threshold */ + __s32 max_rts; /* Maximal RTS threshold */ + + /* Frag threshold */ + __s32 min_frag; /* Minimal frag threshold */ + __s32 max_frag; /* Maximal frag threshold */ + + /* Power Management duration & timeout */ + __s32 min_pmp; /* Minimal PM period */ + __s32 max_pmp; /* Maximal PM period */ + __s32 min_pmt; /* Minimal PM timeout */ + __s32 max_pmt; /* Maximal PM timeout */ + __u16 pmp_flags; /* How to decode max/min PM period */ + __u16 pmt_flags; /* How to decode max/min PM timeout */ + __u16 pm_capa; /* What PM options are supported */ + + /* Encoder stuff */ + __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ + __u8 num_encoding_sizes; /* Number of entry in the list */ + __u8 max_encoding_tokens; /* Max number of tokens */ + /* For drivers that need a "login/passwd" form */ + __u8 encoding_login_index; /* token index for login token */ + + /* Transmit power */ + __u16 txpower_capa; /* What options are supported */ + __u8 num_txpower; /* Number of entries in the list */ + __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ + + /* Wireless Extension version info */ + __u8 we_version_compiled; /* Must be WIRELESS_EXT */ + __u8 we_version_source; /* Last update of source */ + + /* Retry limits and lifetime */ + __u16 retry_capa; /* What retry options are supported */ + __u16 retry_flags; /* How to decode max/min retry limit */ + __u16 r_time_flags; /* How to decode max/min retry life */ + __s32 min_retry; /* Minimal number of retries */ + __s32 max_retry; /* Maximal number of retries */ + __s32 min_r_time; /* Minimal retry lifetime */ + __s32 max_r_time; /* Maximal retry lifetime */ + + /* Frequency */ + __u16 num_channels; /* Number of channels [0; num - 1] */ + __u8 num_frequency; /* Number of entry in the list */ + struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ + /* Note : this frequency list doesn't need to fit channel numbers, + * because each entry contain its channel index */ +}; + +/* + * Private ioctl interface information + */ + +struct iw_priv_args +{ + __u32 cmd; /* Number of the ioctl to issue */ + __u16 set_args; /* Type and number of args */ + __u16 get_args; /* Type and number of args */ + char name[IFNAMSIZ]; /* Name of the extension */ +}; + +/* ----------------------- WIRELESS EVENTS ----------------------- */ +/* + * Wireless events are carried through the rtnetlink socket to user + * space. They are encapsulated in the IFLA_WIRELESS field of + * a RTM_NEWLINK message. + */ + +/* + * A Wireless Event. Contains basically the same data as the ioctl... + */ +struct iw_event +{ + __u16 len; /* Real lenght of this stuff */ + __u16 cmd; /* Wireless IOCTL */ + union iwreq_data u; /* IOCTL fixed payload */ +}; + +/* Size of the Event prefix (including padding and alignement junk) */ +#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) +/* Size of the various events */ +#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) +#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) +#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point)) +#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) + +/* Note : in the case of iw_point, the extra data will come at the + * end of the event */ + +#endif /* _LINUX_WIRELESS_H */ |
