diff options
Diffstat (limited to 'include/linux/usb/langwell_udc.h')
| -rw-r--r-- | include/linux/usb/langwell_udc.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h new file mode 100644 index 0000000..c949178 --- /dev/null +++ b/include/linux/usb/langwell_udc.h @@ -0,0 +1,310 @@ +/* + * Intel Langwell USB Device Controller driver + * Copyright (C) 2008-2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_UDC_H +#define __LANGWELL_UDC_H + + +/* MACRO defines */ +#define CAP_REG_OFFSET 0x0 +#define OP_REG_OFFSET 0x28 + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define DQH_ALIGNMENT 2048 +#define DTD_ALIGNMENT 64 +#define DMA_BOUNDARY 4096 + +#define EP0_MAX_PKT_SIZE 64 +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +#define FLUSH_TIMEOUT 1000 +#define RESET_TIMEOUT 1000 +#define SETUPSTAT_TIMEOUT 100 +#define PRIME_TIMEOUT 100 + + +/* device memory space registers */ + +/* Capability Registers, BAR0 + CAP_REG_OFFSET */ +struct langwell_cap_regs { + /* offset: 0x0 */ + u8 caplength; /* offset of Operational Register */ + u8 _reserved3; + u16 hciversion; /* H: BCD encoding of host version */ + u32 hcsparams; /* H: host port steering logic capability */ + u32 hccparams; /* H: host multiple mode control capability */ +#define HCC_LEN BIT(17) /* Link power management (LPM) capability */ + u8 _reserved4[0x20-0xc]; + /* offset: 0x20 */ + u16 dciversion; /* BCD encoding of device version */ + u8 _reserved5[0x24-0x22]; + u32 dccparams; /* overall device controller capability */ +#define HOSTCAP BIT(8) /* host capable */ +#define DEVCAP BIT(7) /* device capable */ +#define DEN(d) \ + (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */ +} __attribute__ ((packed)); + + +/* Operational Registers, BAR0 + OP_REG_OFFSET */ +struct langwell_op_regs { + /* offset: 0x28 */ + u32 extsts; +#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */ +#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */ +#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */ +#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */ +#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */ + u32 extintr; +#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */ +#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */ +#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */ +#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */ +#define EXTI_NAKE BIT(0) /* NAK interrupt enable */ + /* offset: 0x30 */ + u32 usbcmd; +#define CMD_HIRD(u) \ + (((u)>>24)&0xf) /* bits 27:24, host init resume duration */ +#define CMD_ITC(u) \ + (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */ +#define CMD_PPE BIT(15) /* per-port change events enable */ +#define CMD_ATDTW BIT(14) /* add dTD tripwire */ +#define CMD_SUTW BIT(13) /* setup tripwire */ +#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */ +#define CMD_FS2 BIT(10) /* frame list size */ +#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */ +#define CMD_ASP0 BIT(8) +#define CMD_LR BIT(7) /* light host/device controller reset */ +#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */ +#define CMD_ASE BIT(5) /* asynchronous schedule enable */ +#define CMD_PSE BIT(4) /* periodic schedule enable */ +#define CMD_FS1 BIT(3) +#define CMD_FS0 BIT(2) +#define CMD_RST BIT(1) /* controller reset */ +#define CMD_RUNSTOP BIT(0) /* run/stop */ + u32 usbsts; +#define STS_PPCI(u) \ + (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */ +#define STS_AS BIT(15) /* asynchronous schedule status */ +#define STS_PS BIT(14) /* periodic schedule status */ +#define STS_RCL BIT(13) /* reclamation */ +#define STS_HCH BIT(12) /* HC halted */ +#define STS_ULPII BIT(10) /* ULPI interrupt */ +#define STS_SLI BIT(8) /* DC suspend */ +#define STS_SRI BIT(7) /* SOF received */ +#define STS_URI BIT(6) /* USB reset received */ +#define STS_AAI BIT(5) /* interrupt on async advance */ +#define STS_SEI BIT(4) /* system error */ +#define STS_FRI BIT(3) /* frame list rollover */ +#define STS_PCI BIT(2) /* port change detect */ +#define STS_UEI BIT(1) /* USB error interrupt */ +#define STS_UI BIT(0) /* USB interrupt */ + u32 usbintr; +/* bits 31:16, per-port interrupt enable */ +#define INTR_PPCE(u) (((u)>>16)&0xffff) +#define INTR_ULPIE BIT(10) /* ULPI enable */ +#define INTR_SLE BIT(8) /* DC sleep/suspend enable */ +#define INTR_SRE BIT(7) /* SOF received enable */ +#define INTR_URE BIT(6) /* USB reset enable */ +#define INTR_AAE BIT(5) /* interrupt on async advance enable */ +#define INTR_SEE BIT(4) /* system error enable */ +#define INTR_FRE BIT(3) /* frame list rollover enable */ +#define INTR_PCE BIT(2) /* port change detect enable */ +#define INTR_UEE BIT(1) /* USB error interrupt enable */ +#define INTR_UE BIT(0) /* USB interrupt enable */ + u32 frindex; /* frame index */ +#define FRINDEX_MASK (0x3fff << 0) + u32 ctrldssegment; /* not used */ + u32 deviceaddr; +#define USBADR_SHIFT 25 +#define USBADR(d) \ + (((d)>>25)&0x7f) /* bits 31:25, device address */ +#define USBADR_MASK (0x7f << 25) +#define USBADRA BIT(24) /* device address advance */ + u32 endpointlistaddr;/* endpoint list top memory address */ +/* bits 31:11, endpoint list pointer */ +#define EPBASE(d) (((d)>>11)&0x1fffff) +#define ENDPOINTLISTADDR_MASK (0x1fffff << 11) + u32 ttctrl; /* H: TT operatin, not used */ + /* offset: 0x50 */ + u32 burstsize; /* burst size of data movement */ +#define TXPBURST(b) \ + (((b)>>8)&0xff) /* bits 15:8, TX burst length */ +#define RXPBURST(b) \ + (((b)>>0)&0xff) /* bits 7:0, RX burst length */ + u32 txfilltuning; /* TX tuning */ + u32 txttfilltuning; /* H: TX TT tuning */ + u32 ic_usb; /* control the IC_USB FS/LS transceiver */ + /* offset: 0x60 */ + u32 ulpi_viewport; /* indirect access to ULPI PHY */ +#define ULPIWU BIT(31) /* ULPI wakeup */ +#define ULPIRUN BIT(30) /* ULPI read/write run */ +#define ULPIRW BIT(29) /* ULPI read/write control */ +#define ULPISS BIT(27) /* ULPI sync state */ +#define ULPIPORT(u) \ + (((u)>>24)&7) /* bits 26:24, ULPI port number */ +#define ULPIADDR(u) \ + (((u)>>16)&0xff) /* bits 23:16, ULPI data address */ +#define ULPIDATRD(u) \ + (((u)>>8)&0xff) /* bits 15:8, ULPI data read */ +#define ULPIDATWR(u) \ + (((u)>>0)&0xff) /* bits 7:0, ULPI date write */ + u8 _reserved6[0x70-0x64]; + /* offset: 0x70 */ + u32 configflag; /* H: not used */ + u32 portsc1; /* port status */ +#define DA(p) \ + (((p)>>25)&0x7f) /* bits 31:25, device address */ +#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */ +#define PORTS_WKOC BIT(22) /* wake on over-current enable */ +#define PORTS_WKDS BIT(21) /* wake on disconnect enable */ +#define PORTS_WKCN BIT(20) /* wake on connect enable */ +#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */ +#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */ +#define PORTS_PO BIT(13) /* port owner */ +#define PORTS_PP BIT(12) /* port power */ +#define PORTS_LS (BIT(11) | BIT(10)) /* line status */ +#define PORTS_SLP BIT(9) /* suspend using L1 */ +#define PORTS_PR BIT(8) /* port reset */ +#define PORTS_SUSP BIT(7) /* suspend */ +#define PORTS_FPR BIT(6) /* force port resume */ +#define PORTS_OCC BIT(5) /* over-current change */ +#define PORTS_OCA BIT(4) /* over-current active */ +#define PORTS_PEC BIT(3) /* port enable/disable change */ +#define PORTS_PE BIT(2) /* port enable/disable */ +#define PORTS_CSC BIT(1) /* connect status change */ +#define PORTS_CCS BIT(0) /* current connect status */ + u8 _reserved7[0xb4-0x78]; + /* offset: 0xb4 */ + u32 devlc; /* control LPM and each USB port behavior */ +/* bits 31:29, parallel transceiver select */ +#define LPM_PTS(d) (((d)>>29)&7) +#define LPM_STS BIT(28) /* serial transceiver select */ +#define LPM_PTW BIT(27) /* parallel transceiver width */ +#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */ +#define LPM_PSPD_MASK (BIT(26) | BIT(25)) +#define LPM_SPEED_FULL 0 +#define LPM_SPEED_LOW 1 +#define LPM_SPEED_HIGH 2 +#define LPM_SRT BIT(24) /* shorten reset time */ +#define LPM_PFSC BIT(23) /* port force full speed connect */ +#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */ +#define LPM_STL BIT(16) /* STALL reply to LPM token */ +#define LPM_BA(d) \ + (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */ +#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */ + u8 _reserved8[0xf4-0xb8]; + /* offset: 0xf4 */ + u32 otgsc; /* On-The-Go status and control */ +#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */ +#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */ +#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */ +#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */ +#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */ +#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */ +#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */ +#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */ +#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */ +#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */ +#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */ +#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */ +#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */ +#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */ +#define OTGSC_DPS BIT(14) /* data bus pulsing status */ +#define OTGSC_MST BIT(13) /* 1 ms timer toggle */ +#define OTGSC_BSE BIT(12) /* B session end */ +#define OTGSC_BSV BIT(11) /* B session valid */ +#define OTGSC_ASV BIT(10) /* A session valid */ +#define OTGSC_AVV BIT(9) /* A VBUS valid */ +#define OTGSC_USBID BIT(8) /* USB ID */ +#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */ +#define OTGSC_HADP BIT(6) /* hw assist data pulse */ +#define OTGSC_IDPU BIT(5) /* ID pullup */ +#define OTGSC_DP BIT(4) /* data pulsing */ +#define OTGSC_OT BIT(3) /* OTG termination */ +#define OTGSC_HAAR BIT(2) /* hw assist auto reset */ +#define OTGSC_VC BIT(1) /* VBUS charge */ +#define OTGSC_VD BIT(0) /* VBUS discharge */ + u32 usbmode; +#define MODE_VBPS BIT(5) /* R/W VBUS power select */ +#define MODE_SDIS BIT(4) /* R/W stream disable mode */ +#define MODE_SLOM BIT(3) /* R/W setup lockout mode */ +#define MODE_ENSE BIT(2) /* endian select */ +#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */ +#define MODE_IDLE 0 +#define MODE_DEVICE 2 +#define MODE_HOST 3 + u8 _reserved9[0x100-0xfc]; + /* offset: 0x100 */ + u32 endptnak; +#define EPTN(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */ +#define EPRN(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */ + u32 endptnaken; +#define EPTNE(e) \ + (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */ +#define EPRNE(e) \ + (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */ + u32 endptsetupstat; +#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */ +#define EP0SETUPSTAT_MASK 1 + u32 endptprime; +/* bits 31:16, prime endpoint transmit buffer */ +#define PETB(e) (((e)>>16)&0xffff) +/* bits 15:0, prime endpoint receive buffer */ +#define PERB(e) (((e)>>0)&0xffff) + /* offset: 0x110 */ + u32 endptflush; +/* bits 31:16, flush endpoint transmit buffer */ +#define FETB(e) (((e)>>16)&0xffff) +/* bits 15:0, flush endpoint receive buffer */ +#define FERB(e) (((e)>>0)&0xffff) + u32 endptstat; +/* bits 31:16, endpoint transmit buffer ready */ +#define ETBR(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive buffer ready */ +#define ERBR(e) (((e)>>0)&0xffff) + u32 endptcomplete; +/* bits 31:16, endpoint transmit complete event */ +#define ETCE(e) (((e)>>16)&0xffff) +/* bits 15:0, endpoint receive complete event */ +#define ERCE(e) (((e)>>0)&0xffff) + /* offset: 0x11c */ + u32 endptctrl[16]; +#define EPCTRL_TXE BIT(23) /* TX endpoint enable */ +#define EPCTRL_TXR BIT(22) /* TX data toggle reset */ +#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */ +#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */ +#define EPCTRL_TXT_SHIFT 18 +#define EPCTRL_TXD BIT(17) /* TX endpoint data source */ +#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */ +#define EPCTRL_RXE BIT(7) /* RX endpoint enable */ +#define EPCTRL_RXR BIT(6) /* RX data toggle reset */ +#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */ +#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */ +#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */ +#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */ +#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */ +} __attribute__ ((packed)); + +#endif /* __LANGWELL_UDC_H */ + |
