summaryrefslogtreecommitdiffstats
path: root/include/linux/usb/isp1362.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/usb/isp1362.h')
-rw-r--r--include/linux/usb/isp1362.h46
1 files changed, 46 insertions, 0 deletions
diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h
new file mode 100644
index 0000000..642684b
--- /dev/null
+++ b/include/linux/usb/isp1362.h
@@ -0,0 +1,46 @@
+/*
+ * board initialization code should put one of these into dev->platform_data
+ * and place the isp1362 onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP1362_H__
+#define __LINUX_USB_ISP1362_H__
+
+struct isp1362_platform_data {
+ /* Enable internal pulldown resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* Clock cannot be stopped */
+ unsigned clknotstop:1;
+ /* On-chip overcurrent protection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* DREQ output polarity */
+ unsigned dreq_act_high:1;
+ /* DACK input polarity */
+ unsigned dack_act_high:1;
+ /* chip can be resumed via H_WAKEUP pin */
+ unsigned remote_wakeup_connected:1;
+ /* Switch or not to switch (keep always powered) */
+ unsigned no_power_switching:1;
+ /* Ganged port power switching (0) or individual port power switching (1) */
+ unsigned power_switching_mode:1;
+ /* Given port_power, msec/2 after power on till power good */
+ u8 potpg;
+ /* Hardware reset set/clear */
+ void (*reset) (struct device *dev, int set);
+ /* Clock start/stop */
+ void (*clock) (struct device *dev, int start);
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 110ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG (registers)
+ * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
+ * WE MUST NOT be activated during these intervals (even without CS!)
+ */
+ void (*delay) (struct device *dev, unsigned int delay);
+};
+
+#endif
OpenPOWER on IntegriCloud