diff options
Diffstat (limited to 'include/linux/usb.h')
| -rw-r--r-- | include/linux/usb.h | 1157 |
1 files changed, 1157 insertions, 0 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h new file mode 100644 index 0000000..c967284 --- /dev/null +++ b/include/linux/usb.h @@ -0,0 +1,1157 @@ +#ifndef __LINUX_USB_H +#define __LINUX_USB_H + +#include <linux/mod_devicetable.h> +#include <linux/usb_ch9.h> + +#define USB_MAJOR 180 + + +#ifdef __KERNEL__ + +#include <linux/config.h> +#include <linux/errno.h> /* for -ENODEV */ +#include <linux/delay.h> /* for mdelay() */ +#include <linux/interrupt.h> /* for in_interrupt() */ +#include <linux/list.h> /* for struct list_head */ +#include <linux/kref.h> /* for struct kref */ +#include <linux/device.h> /* for struct device */ +#include <linux/fs.h> /* for struct file_operations */ +#include <linux/completion.h> /* for struct completion */ +#include <linux/sched.h> /* for current && schedule_timeout */ + +struct usb_device; +struct usb_driver; + +/*-------------------------------------------------------------------------*/ + +/* + * Host-side wrappers for standard USB descriptors ... these are parsed + * from the data provided by devices. Parsing turns them from a flat + * sequence of descriptors into a hierarchy: + * + * - devices have one (usually) or more configs; + * - configs have one (often) or more interfaces; + * - interfaces have one (usually) or more settings; + * - each interface setting has zero or (usually) more endpoints. + * + * And there might be other descriptors mixed in with those. + * + * Devices may also have class-specific or vendor-specific descriptors. + */ + +/** + * struct usb_host_endpoint - host-side endpoint descriptor and queue + * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder + * @urb_list: urbs queued to this endpoint; maintained by usbcore + * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) + * with one or more transfer descriptors (TDs) per urb + * @extra: descriptors following this endpoint in the configuration + * @extralen: how many bytes of "extra" are valid + * + * USB requests are always queued to a given endpoint, identified by a + * descriptor within an active interface in a given USB configuration. + */ +struct usb_host_endpoint { + struct usb_endpoint_descriptor desc; + struct list_head urb_list; + void *hcpriv; + + unsigned char *extra; /* Extra descriptors */ + int extralen; +}; + +/* host-side wrapper for one interface setting's parsed descriptors */ +struct usb_host_interface { + struct usb_interface_descriptor desc; + + /* array of desc.bNumEndpoint endpoints associated with this + * interface setting. these will be in no particular order. + */ + struct usb_host_endpoint *endpoint; + + char *string; /* iInterface string, if present */ + unsigned char *extra; /* Extra descriptors */ + int extralen; +}; + +enum usb_interface_condition { + USB_INTERFACE_UNBOUND = 0, + USB_INTERFACE_BINDING, + USB_INTERFACE_BOUND, + USB_INTERFACE_UNBINDING, +}; + +/** + * struct usb_interface - what usb device drivers talk to + * @altsetting: array of interface structures, one for each alternate + * setting that may be selected. Each one includes a set of + * endpoint configurations. They will be in no particular order. + * @num_altsetting: number of altsettings defined. + * @cur_altsetting: the current altsetting. + * @driver: the USB driver that is bound to this interface. + * @minor: the minor number assigned to this interface, if this + * interface is bound to a driver that uses the USB major number. + * If this interface does not use the USB major, this field should + * be unused. The driver should set this value in the probe() + * function of the driver, after it has been assigned a minor + * number from the USB core by calling usb_register_dev(). + * @condition: binding state of the interface: not bound, binding + * (in probe()), bound to a driver, or unbinding (in disconnect()) + * @dev: driver model's view of this device + * @class_dev: driver model's class view of this device. + * + * USB device drivers attach to interfaces on a physical device. Each + * interface encapsulates a single high level function, such as feeding + * an audio stream to a speaker or reporting a change in a volume control. + * Many USB devices only have one interface. The protocol used to talk to + * an interface's endpoints can be defined in a usb "class" specification, + * or by a product's vendor. The (default) control endpoint is part of + * every interface, but is never listed among the interface's descriptors. + * + * The driver that is bound to the interface can use standard driver model + * calls such as dev_get_drvdata() on the dev member of this structure. + * + * Each interface may have alternate settings. The initial configuration + * of a device sets altsetting 0, but the device driver can change + * that setting using usb_set_interface(). Alternate settings are often + * used to control the the use of periodic endpoints, such as by having + * different endpoints use different amounts of reserved USB bandwidth. + * All standards-conformant USB devices that use isochronous endpoints + * will use them in non-default settings. + * + * The USB specification says that alternate setting numbers must run from + * 0 to one less than the total number of alternate settings. But some + * devices manage to mess this up, and the structures aren't necessarily + * stored in numerical order anyhow. Use usb_altnum_to_altsetting() to + * look up an alternate setting in the altsetting array based on its number. + */ +struct usb_interface { + /* array of alternate settings for this interface, + * stored in no particular order */ + struct usb_host_interface *altsetting; + + struct usb_host_interface *cur_altsetting; /* the currently + * active alternate setting */ + unsigned num_altsetting; /* number of alternate settings */ + + int minor; /* minor number this interface is bound to */ + enum usb_interface_condition condition; /* state of binding */ + struct device dev; /* interface specific device info */ + struct class_device *class_dev; +}; +#define to_usb_interface(d) container_of(d, struct usb_interface, dev) +#define interface_to_usbdev(intf) \ + container_of(intf->dev.parent, struct usb_device, dev) + +static inline void *usb_get_intfdata (struct usb_interface *intf) +{ + return dev_get_drvdata (&intf->dev); +} + +static inline void usb_set_intfdata (struct usb_interface *intf, void *data) +{ + dev_set_drvdata(&intf->dev, data); +} + +struct usb_interface *usb_get_intf(struct usb_interface *intf); +void usb_put_intf(struct usb_interface *intf); + +/* this maximum is arbitrary */ +#define USB_MAXINTERFACES 32 + +/** + * struct usb_interface_cache - long-term representation of a device interface + * @num_altsetting: number of altsettings defined. + * @ref: reference counter. + * @altsetting: variable-length array of interface structures, one for + * each alternate setting that may be selected. Each one includes a + * set of endpoint configurations. They will be in no particular order. + * + * These structures persist for the lifetime of a usb_device, unlike + * struct usb_interface (which persists only as long as its configuration + * is installed). The altsetting arrays can be accessed through these + * structures at any time, permitting comparison of configurations and + * providing support for the /proc/bus/usb/devices pseudo-file. + */ +struct usb_interface_cache { + unsigned num_altsetting; /* number of alternate settings */ + struct kref ref; /* reference counter */ + + /* variable-length array of alternate settings for this interface, + * stored in no particular order */ + struct usb_host_interface altsetting[0]; +}; +#define ref_to_usb_interface_cache(r) \ + container_of(r, struct usb_interface_cache, ref) +#define altsetting_to_usb_interface_cache(a) \ + container_of(a, struct usb_interface_cache, altsetting[0]) + +/** + * struct usb_host_config - representation of a device's configuration + * @desc: the device's configuration descriptor. + * @string: pointer to the cached version of the iConfiguration string, if + * present for this configuration. + * @interface: array of pointers to usb_interface structures, one for each + * interface in the configuration. The number of interfaces is stored + * in desc.bNumInterfaces. These pointers are valid only while the + * the configuration is active. + * @intf_cache: array of pointers to usb_interface_cache structures, one + * for each interface in the configuration. These structures exist + * for the entire life of the device. + * @extra: pointer to buffer containing all extra descriptors associated + * with this configuration (those preceding the first interface + * descriptor). + * @extralen: length of the extra descriptors buffer. + * + * USB devices may have multiple configurations, but only one can be active + * at any time. Each encapsulates a different operational environment; + * for example, a dual-speed device would have separate configurations for + * full-speed and high-speed operation. The number of configurations + * available is stored in the device descriptor as bNumConfigurations. + * + * A configuration can contain multiple interfaces. Each corresponds to + * a different function of the USB device, and all are available whenever + * the configuration is active. The USB standard says that interfaces + * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot + * of devices get this wrong. In addition, the interface array is not + * guaranteed to be sorted in numerical order. Use usb_ifnum_to_if() to + * look up an interface entry based on its number. + * + * Device drivers should not attempt to activate configurations. The choice + * of which configuration to install is a policy decision based on such + * considerations as available power, functionality provided, and the user's + * desires (expressed through hotplug scripts). However, drivers can call + * usb_reset_configuration() to reinitialize the current configuration and + * all its interfaces. + */ +struct usb_host_config { + struct usb_config_descriptor desc; + + char *string; + /* the interfaces associated with this configuration, + * stored in no particular order */ + struct usb_interface *interface[USB_MAXINTERFACES]; + + /* Interface information available even when this is not the + * active configuration */ + struct usb_interface_cache *intf_cache[USB_MAXINTERFACES]; + + unsigned char *extra; /* Extra descriptors */ + int extralen; +}; + +int __usb_get_extra_descriptor(char *buffer, unsigned size, + unsigned char type, void **ptr); +#define usb_get_extra_descriptor(ifpoint,type,ptr)\ + __usb_get_extra_descriptor((ifpoint)->extra,(ifpoint)->extralen,\ + type,(void**)ptr) + +/* -------------------------------------------------------------------------- */ + +struct usb_operations; + +/* USB device number allocation bitmap */ +struct usb_devmap { + unsigned long devicemap[128 / (8*sizeof(unsigned long))]; +}; + +/* + * Allocated per bus (tree of devices) we have: + */ +struct usb_bus { + struct device *controller; /* host/master side hardware */ + int busnum; /* Bus number (in order of reg) */ + char *bus_name; /* stable id (PCI slot_name etc) */ + u8 otg_port; /* 0, or number of OTG/HNP port */ + unsigned is_b_host:1; /* true during some HNP roleswitches */ + unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ + + int devnum_next; /* Next open device number in round-robin allocation */ + + struct usb_devmap devmap; /* device address allocation map */ + struct usb_operations *op; /* Operations (specific to the HC) */ + struct usb_device *root_hub; /* Root hub */ + struct list_head bus_list; /* list of busses */ + void *hcpriv; /* Host Controller private data */ + + int bandwidth_allocated; /* on this bus: how much of the time + * reserved for periodic (intr/iso) + * requests is used, on average? + * Units: microseconds/frame. + * Limits: Full/low speed reserve 90%, + * while high speed reserves 80%. + */ + int bandwidth_int_reqs; /* number of Interrupt requests */ + int bandwidth_isoc_reqs; /* number of Isoc. requests */ + + struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */ + + struct class_device class_dev; /* class device for this bus */ + void (*release)(struct usb_bus *bus); /* function to destroy this bus's memory */ +#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) + struct mon_bus *mon_bus; /* non-null when associated */ + int monitored; /* non-zero when monitored */ +#endif +}; +#define to_usb_bus(d) container_of(d, struct usb_bus, class_dev) + + +/* -------------------------------------------------------------------------- */ + +/* This is arbitrary. + * From USB 2.0 spec Table 11-13, offset 7, a hub can + * have up to 255 ports. The most yet reported is 10. + */ +#define USB_MAXCHILDREN (16) + +struct usb_tt; + +/* + * struct usb_device - kernel's representation of a USB device + * + * FIXME: Write the kerneldoc! + * + * Usbcore drivers should not set usbdev->state directly. Instead use + * usb_set_device_state(). + */ +struct usb_device { + int devnum; /* Address on USB bus */ + char devpath [16]; /* Use in messages: /port/port/... */ + enum usb_device_state state; /* configured, not attached, etc */ + enum usb_device_speed speed; /* high/full/low (or error) */ + + struct usb_tt *tt; /* low/full speed dev, highspeed hub */ + int ttport; /* device port on that tt hub */ + + struct semaphore serialize; + + unsigned int toggle[2]; /* one bit for each endpoint ([0] = IN, [1] = OUT) */ + + struct usb_device *parent; /* our hub, unless we're the root */ + struct usb_bus *bus; /* Bus we're part of */ + struct usb_host_endpoint ep0; + + struct device dev; /* Generic device interface */ + + struct usb_device_descriptor descriptor;/* Descriptor */ + struct usb_host_config *config; /* All of the configs */ + + struct usb_host_config *actconfig;/* the active configuration */ + struct usb_host_endpoint *ep_in[16]; + struct usb_host_endpoint *ep_out[16]; + + char **rawdescriptors; /* Raw descriptors for each config */ + + int have_langid; /* whether string_langid is valid yet */ + int string_langid; /* language ID for strings */ + + char *product; + char *manufacturer; + char *serial; /* static strings from the device */ + struct list_head filelist; + struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ + + /* + * Child devices - these can be either new devices + * (if this is a hub device), or different instances + * of this same device. + * + * Each instance needs its own set of data structures. + */ + + int maxchild; /* Number of ports if hub */ + struct usb_device *children[USB_MAXCHILDREN]; +}; +#define to_usb_device(d) container_of(d, struct usb_device, dev) + +extern struct usb_device *usb_get_dev(struct usb_device *dev); +extern void usb_put_dev(struct usb_device *dev); + +extern void usb_lock_device(struct usb_device *udev); +extern int usb_trylock_device(struct usb_device *udev); +extern int usb_lock_device_for_reset(struct usb_device *udev, + struct usb_interface *iface); +extern void usb_unlock_device(struct usb_device *udev); + +/* USB port reset for device reinitialization */ +extern int usb_reset_device(struct usb_device *dev); + +extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); + +/*-------------------------------------------------------------------------*/ + +/* for drivers using iso endpoints */ +extern int usb_get_current_frame_number (struct usb_device *usb_dev); + +/* used these for multi-interface device registration */ +extern int usb_driver_claim_interface(struct usb_driver *driver, + struct usb_interface *iface, void* priv); + +/** + * usb_interface_claimed - returns true iff an interface is claimed + * @iface: the interface being checked + * + * Returns true (nonzero) iff the interface is claimed, else false (zero). + * Callers must own the driver model's usb bus readlock. So driver + * probe() entries don't need extra locking, but other call contexts + * may need to explicitly claim that lock. + * + */ +static inline int usb_interface_claimed(struct usb_interface *iface) { + return (iface->dev.driver != NULL); +} + +extern void usb_driver_release_interface(struct usb_driver *driver, + struct usb_interface *iface); +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id); + +extern struct usb_interface *usb_find_interface(struct usb_driver *drv, + int minor); +extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, + unsigned ifnum); +extern struct usb_host_interface *usb_altnum_to_altsetting( + struct usb_interface *intf, unsigned int altnum); + + +/** + * usb_make_path - returns stable device path in the usb tree + * @dev: the device whose path is being constructed + * @buf: where to put the string + * @size: how big is "buf"? + * + * Returns length of the string (> 0) or negative if size was too small. + * + * This identifier is intended to be "stable", reflecting physical paths in + * hardware such as physical bus addresses for host controllers or ports on + * USB hubs. That makes it stay the same until systems are physically + * reconfigured, by re-cabling a tree of USB devices or by moving USB host + * controllers. Adding and removing devices, including virtual root hubs + * in host controller driver modules, does not change these path identifers; + * neither does rebooting or re-enumerating. These are more useful identifiers + * than changeable ("unstable") ones like bus numbers or device addresses. + * + * With a partial exception for devices connected to USB 2.0 root hubs, these + * identifiers are also predictable. So long as the device tree isn't changed, + * plugging any USB device into a given hub port always gives it the same path. + * Because of the use of "companion" controllers, devices connected to ports on + * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are + * high speed, and a different one if they are full or low speed. + */ +static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size) +{ + int actual; + actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath); + return (actual >= (int)size) ? -1 : actual; +} + +/*-------------------------------------------------------------------------*/ + +#define USB_DEVICE_ID_MATCH_DEVICE (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) +#define USB_DEVICE_ID_MATCH_DEV_RANGE (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) +#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) +#define USB_DEVICE_ID_MATCH_DEV_INFO \ + (USB_DEVICE_ID_MATCH_DEV_CLASS | USB_DEVICE_ID_MATCH_DEV_SUBCLASS | USB_DEVICE_ID_MATCH_DEV_PROTOCOL) +#define USB_DEVICE_ID_MATCH_INT_INFO \ + (USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS | USB_DEVICE_ID_MATCH_INT_PROTOCOL) + +/** + * USB_DEVICE - macro used to describe a specific usb device + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * + * This macro is used to create a struct usb_device_id that matches a + * specific device. + */ +#define USB_DEVICE(vend,prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), .idProduct = (prod) +/** + * USB_DEVICE_VER - macro used to describe a specific usb device with a version range + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @lo: the bcdDevice_lo value + * @hi: the bcdDevice_hi value + * + * This macro is used to create a struct usb_device_id that matches a + * specific device, with a version range. + */ +#define USB_DEVICE_VER(vend,prod,lo,hi) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, .idVendor = (vend), .idProduct = (prod), .bcdDevice_lo = (lo), .bcdDevice_hi = (hi) + +/** + * USB_DEVICE_INFO - macro used to describe a class of usb devices + * @cl: bDeviceClass value + * @sc: bDeviceSubClass value + * @pr: bDeviceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific class of devices. + */ +#define USB_DEVICE_INFO(cl,sc,pr) \ + .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, .bDeviceClass = (cl), .bDeviceSubClass = (sc), .bDeviceProtocol = (pr) + +/** + * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific class of interfaces. + */ +#define USB_INTERFACE_INFO(cl,sc,pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, .bInterfaceClass = (cl), .bInterfaceSubClass = (sc), .bInterfaceProtocol = (pr) + +/* -------------------------------------------------------------------------- */ + +/** + * struct usb_driver - identifies USB driver to usbcore + * @owner: Pointer to the module owner of this driver; initialize + * it using THIS_MODULE. + * @name: The driver name should be unique among USB drivers, + * and should normally be the same as the module name. + * @probe: Called to see if the driver is willing to manage a particular + * interface on a device. If it is, probe returns zero and uses + * dev_set_drvdata() to associate driver-specific data with the + * interface. It may also use usb_set_interface() to specify the + * appropriate altsetting. If unwilling to manage the interface, + * return a negative errno value. + * @disconnect: Called when the interface is no longer accessible, usually + * because its device has been (or is being) disconnected or the + * driver module is being unloaded. + * @ioctl: Used for drivers that want to talk to userspace through + * the "usbfs" filesystem. This lets devices provide ways to + * expose information to user space regardless of where they + * do (or don't) show up otherwise in the filesystem. + * @suspend: Called when the device is going to be suspended by the system. + * @resume: Called when the device is being resumed by the system. + * @id_table: USB drivers use ID table to support hotplugging. + * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set + * or your driver's probe function will never get called. + * @driver: the driver model core driver structure. + * + * USB drivers must provide a name, probe() and disconnect() methods, + * and an id_table. Other driver fields are optional. + * + * The id_table is used in hotplugging. It holds a set of descriptors, + * and specialized data may be associated with each entry. That table + * is used by both user and kernel mode hotplugging support. + * + * The probe() and disconnect() methods are called in a context where + * they can sleep, but they should avoid abusing the privilege. Most + * work to connect to a device should be done when the device is opened, + * and undone at the last close. The disconnect code needs to address + * concurrency issues with respect to open() and close() methods, as + * well as forcing all pending I/O requests to complete (by unlinking + * them as necessary, and blocking until the unlinks complete). + */ +struct usb_driver { + struct module *owner; + + const char *name; + + int (*probe) (struct usb_interface *intf, + const struct usb_device_id *id); + + void (*disconnect) (struct usb_interface *intf); + + int (*ioctl) (struct usb_interface *intf, unsigned int code, void *buf); + + int (*suspend) (struct usb_interface *intf, u32 state); + int (*resume) (struct usb_interface *intf); + + const struct usb_device_id *id_table; + + struct device_driver driver; +}; +#define to_usb_driver(d) container_of(d, struct usb_driver, driver) + +extern struct bus_type usb_bus_type; + +/** + * struct usb_class_driver - identifies a USB driver that wants to use the USB major number + * @name: devfs name for this driver. Will also be used by the driver + * class code to create a usb class device. + * @fops: pointer to the struct file_operations of this driver. + * @mode: the mode for the devfs file to be created for this driver. + * @minor_base: the start of the minor range for this driver. + * + * This structure is used for the usb_register_dev() and + * usb_unregister_dev() functions, to consolidate a number of the + * parameters used for them. + */ +struct usb_class_driver { + char *name; + struct file_operations *fops; + mode_t mode; + int minor_base; +}; + +/* + * use these in module_init()/module_exit() + * and don't forget MODULE_DEVICE_TABLE(usb, ...) + */ +extern int usb_register(struct usb_driver *); +extern void usb_deregister(struct usb_driver *); + +extern int usb_register_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver); +extern void usb_deregister_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver); + +extern int usb_disabled(void); + +/* -------------------------------------------------------------------------- */ + +/* + * URB support, for asynchronous request completions + */ + +/* + * urb->transfer_flags: + */ +#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ +#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame ignored */ +#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ +#define URB_NO_SETUP_DMA_MAP 0x0008 /* urb->setup_dma valid on submit */ +#define URB_ASYNC_UNLINK 0x0010 /* usb_unlink_urb() returns asap */ +#define URB_NO_FSBR 0x0020 /* UHCI-specific */ +#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUTs with short packet */ +#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt needed */ + +struct usb_iso_packet_descriptor { + unsigned int offset; + unsigned int length; /* expected length */ + unsigned int actual_length; + unsigned int status; +}; + +struct urb; +struct pt_regs; + +typedef void (*usb_complete_t)(struct urb *, struct pt_regs *); + +/** + * struct urb - USB Request Block + * @urb_list: For use by current owner of the URB. + * @pipe: Holds endpoint number, direction, type, and more. + * Create these values with the eight macros available; + * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl" + * (control), "bulk", "int" (interrupt), or "iso" (isochronous). + * For example usb_sndbulkpipe() or usb_rcvintpipe(). Endpoint + * numbers range from zero to fifteen. Note that "in" endpoint two + * is a different endpoint (and pipe) from "out" endpoint two. + * The current configuration controls the existence, type, and + * maximum packet size of any given endpoint. + * @dev: Identifies the USB device to perform the request. + * @status: This is read in non-iso completion functions to get the + * status of the particular request. ISO requests only use it + * to tell whether the URB was unlinked; detailed status for + * each frame is in the fields of the iso_frame-desc. + * @transfer_flags: A variety of flags may be used to affect how URB + * submission, unlinking, or operation are handled. Different + * kinds of URB can use different flags. + * @transfer_buffer: This identifies the buffer to (or from) which + * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP + * is set). This buffer must be suitable for DMA; allocate it with + * kmalloc() or equivalent. For transfers to "in" endpoints, contents + * of this buffer will be modified. This buffer is used for the data + * stage of control transfers. + * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, + * the device driver is saying that it provided this DMA address, + * which the host controller driver should use in preference to the + * transfer_buffer. + * @transfer_buffer_length: How big is transfer_buffer. The transfer may + * be broken up into chunks according to the current maximum packet + * size for the endpoint, which is a function of the configuration + * and is encoded in the pipe. When the length is zero, neither + * transfer_buffer nor transfer_dma is used. + * @actual_length: This is read in non-iso completion functions, and + * it tells how many bytes (out of transfer_buffer_length) were + * transferred. It will normally be the same as requested, unless + * either an error was reported or a short read was performed. + * The URB_SHORT_NOT_OK transfer flag may be used to make such + * short reads be reported as errors. + * @setup_packet: Only used for control transfers, this points to eight bytes + * of setup data. Control transfers always start by sending this data + * to the device. Then transfer_buffer is read or written, if needed. + * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the + * device driver has provided this DMA address for the setup packet. + * The host controller driver should use this in preference to + * setup_packet. + * @start_frame: Returns the initial frame for isochronous transfers. + * @number_of_packets: Lists the number of ISO transfer buffers. + * @interval: Specifies the polling interval for interrupt or isochronous + * transfers. The units are frames (milliseconds) for for full and low + * speed devices, and microframes (1/8 millisecond) for highspeed ones. + * @error_count: Returns the number of ISO transfers that reported errors. + * @context: For use in completion functions. This normally points to + * request-specific driver context. + * @complete: Completion handler. This URB is passed as the parameter to the + * completion function. The completion function may then do what + * it likes with the URB, including resubmitting or freeing it. + * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to + * collect the transfer status for each buffer. + * + * This structure identifies USB transfer requests. URBs must be allocated by + * calling usb_alloc_urb() and freed with a call to usb_free_urb(). + * Initialization may be done using various usb_fill_*_urb() functions. URBs + * are submitted using usb_submit_urb(), and pending requests may be canceled + * using usb_unlink_urb() or usb_kill_urb(). + * + * Data Transfer Buffers: + * + * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise + * taken from the general page pool. That is provided by transfer_buffer + * (control requests also use setup_packet), and host controller drivers + * perform a dma mapping (and unmapping) for each buffer transferred. Those + * mapping operations can be expensive on some platforms (perhaps using a dma + * bounce buffer or talking to an IOMMU), + * although they're cheap on commodity x86 and ppc hardware. + * + * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags, + * which tell the host controller driver that no such mapping is needed since + * the device driver is DMA-aware. For example, a device driver might + * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map(). + * When these transfer flags are provided, host controller drivers will + * attempt to use the dma addresses found in the transfer_dma and/or + * setup_dma fields rather than determining a dma address themselves. (Note + * that transfer_buffer and setup_packet must still be set because not all + * host controllers use DMA, nor do virtual root hubs). + * + * Initialization: + * + * All URBs submitted must initialize the dev, pipe, transfer_flags (may be + * zero), and complete fields. + * The URB_ASYNC_UNLINK transfer flag affects later invocations of + * the usb_unlink_urb() routine. Note: Failure to set URB_ASYNC_UNLINK + * with usb_unlink_urb() is deprecated. For synchronous unlinks use + * usb_kill_urb() instead. + * + * All URBs must also initialize + * transfer_buffer and transfer_buffer_length. They may provide the + * URB_SHORT_NOT_OK transfer flag, indicating that short reads are + * to be treated as errors; that flag is invalid for write requests. + * + * Bulk URBs may + * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers + * should always terminate with a short packet, even if it means adding an + * extra zero length packet. + * + * Control URBs must provide a setup_packet. The setup_packet and + * transfer_buffer may each be mapped for DMA or not, independently of + * the other. The transfer_flags bits URB_NO_TRANSFER_DMA_MAP and + * URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped. + * URB_NO_SETUP_DMA_MAP is ignored for non-control URBs. + * + * Interrupt URBs must provide an interval, saying how often (in milliseconds + * or, for highspeed devices, 125 microsecond units) + * to poll for transfers. After the URB has been submitted, the interval + * field reflects how the transfer was actually scheduled. + * The polling interval may be more frequent than requested. + * For example, some controllers have a maximum interval of 32 milliseconds, + * while others support intervals of up to 1024 milliseconds. + * Isochronous URBs also have transfer intervals. (Note that for isochronous + * endpoints, as well as high speed interrupt endpoints, the encoding of + * the transfer interval in the endpoint descriptor is logarithmic. + * Device drivers must convert that value to linear units themselves.) + * + * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling + * the host controller to schedule the transfer as soon as bandwidth + * utilization allows, and then set start_frame to reflect the actual frame + * selected during submission. Otherwise drivers must specify the start_frame + * and handle the case where the transfer can't begin then. However, drivers + * won't know how bandwidth is currently allocated, and while they can + * find the current frame using usb_get_current_frame_number () they can't + * know the range for that frame number. (Ranges for frame counter values + * are HC-specific, and can go from 256 to 65536 frames from "now".) + * + * Isochronous URBs have a different data transfer model, in part because + * the quality of service is only "best effort". Callers provide specially + * allocated URBs, with number_of_packets worth of iso_frame_desc structures + * at the end. Each such packet is an individual ISO transfer. Isochronous + * URBs are normally queued, submitted by drivers to arrange that + * transfers are at least double buffered, and then explicitly resubmitted + * in completion handlers, so + * that data (such as audio or video) streams at as constant a rate as the + * host controller scheduler can support. + * + * Completion Callbacks: + * + * The completion callback is made in_interrupt(), and one of the first + * things that a completion handler should do is check the status field. + * The status field is provided for all URBs. It is used to report + * unlinked URBs, and status for all non-ISO transfers. It should not + * be examined before the URB is returned to the completion handler. + * + * The context field is normally used to link URBs back to the relevant + * driver or request state. + * + * When the completion callback is invoked for non-isochronous URBs, the + * actual_length field tells how many bytes were transferred. This field + * is updated even when the URB terminated with an error or was unlinked. + * + * ISO transfer status is reported in the status and actual_length fields + * of the iso_frame_desc array, and the number of errors is reported in + * error_count. Completion callbacks for ISO transfers will normally + * (re)submit URBs to ensure a constant transfer rate. + */ +struct urb +{ + /* private, usb core and host controller only fields in the urb */ + struct kref kref; /* reference count of the URB */ + spinlock_t lock; /* lock for the URB */ + void *hcpriv; /* private data for host controller */ + struct list_head urb_list; /* list pointer to all active urbs */ + int bandwidth; /* bandwidth for INT/ISO request */ + atomic_t use_count; /* concurrent submissions counter */ + u8 reject; /* submissions will fail */ + + /* public, documented fields in the urb that can be used by drivers */ + struct usb_device *dev; /* (in) pointer to associated device */ + unsigned int pipe; /* (in) pipe information */ + int status; /* (return) non-ISO status */ + unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ + void *transfer_buffer; /* (in) associated data buffer */ + dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ + int transfer_buffer_length; /* (in) data buffer length */ + int actual_length; /* (return) actual transfer length */ + unsigned char *setup_packet; /* (in) setup packet (control only) */ + dma_addr_t setup_dma; /* (in) dma addr for setup_packet */ + int start_frame; /* (modify) start frame (ISO) */ + int number_of_packets; /* (in) number of ISO packets */ + int interval; /* (modify) transfer interval (INT/ISO) */ + int error_count; /* (return) number of ISO errors */ + void *context; /* (in) context for completion */ + usb_complete_t complete; /* (in) completion routine */ + struct usb_iso_packet_descriptor iso_frame_desc[0]; /* (in) ISO ONLY */ +}; + +/* -------------------------------------------------------------------------- */ + +/** + * usb_fill_control_urb - initializes a control urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @setup_packet: pointer to the setup_packet buffer + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * + * Initializes a control urb with the proper information needed to submit + * it to a device. + */ +static inline void usb_fill_control_urb (struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + unsigned char *setup_packet, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete, + void *context) +{ + spin_lock_init(&urb->lock); + urb->dev = dev; + urb->pipe = pipe; + urb->setup_packet = setup_packet; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete; + urb->context = context; +} + +/** + * usb_fill_bulk_urb - macro to help initialize a bulk urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * + * Initializes a bulk urb with the proper information needed to submit it + * to a device. + */ +static inline void usb_fill_bulk_urb (struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete, + void *context) +{ + spin_lock_init(&urb->lock); + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete; + urb->context = context; +} + +/** + * usb_fill_int_urb - macro to help initialize a interrupt urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * @interval: what to set the urb interval to, encoded like + * the endpoint descriptor's bInterval value. + * + * Initializes a interrupt urb with the proper information needed to submit + * it to a device. + * Note that high speed interrupt endpoints use a logarithmic encoding of + * the endpoint interval, and express polling intervals in microframes + * (eight per millisecond) rather than in frames (one per millisecond). + */ +static inline void usb_fill_int_urb (struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete, + void *context, + int interval) +{ + spin_lock_init(&urb->lock); + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete; + urb->context = context; + if (dev->speed == USB_SPEED_HIGH) + urb->interval = 1 << (interval - 1); + else + urb->interval = interval; + urb->start_frame = -1; +} + +extern void usb_init_urb(struct urb *urb); +extern struct urb *usb_alloc_urb(int iso_packets, int mem_flags); +extern void usb_free_urb(struct urb *urb); +#define usb_put_urb usb_free_urb +extern struct urb *usb_get_urb(struct urb *urb); +extern int usb_submit_urb(struct urb *urb, int mem_flags); +extern int usb_unlink_urb(struct urb *urb); +extern void usb_kill_urb(struct urb *urb); + +#define HAVE_USB_BUFFERS +void *usb_buffer_alloc (struct usb_device *dev, size_t size, + int mem_flags, dma_addr_t *dma); +void usb_buffer_free (struct usb_device *dev, size_t size, + void *addr, dma_addr_t dma); + +#if 0 +struct urb *usb_buffer_map (struct urb *urb); +void usb_buffer_dmasync (struct urb *urb); +void usb_buffer_unmap (struct urb *urb); +#endif + +struct scatterlist; +int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int nents); +#if 0 +void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents); +#endif +void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, + struct scatterlist *sg, int n_hw_ents); + +/*-------------------------------------------------------------------* + * SYNCHRONOUS CALL SUPPORT * + *-------------------------------------------------------------------*/ + +extern int usb_control_msg(struct usb_device *dev, unsigned int pipe, + __u8 request, __u8 requesttype, __u16 value, __u16 index, + void *data, __u16 size, int timeout); +extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, + void *data, int len, int *actual_length, + int timeout); + +/* selective suspend/resume */ +extern int usb_suspend_device(struct usb_device *dev, u32 state); +extern int usb_resume_device(struct usb_device *dev); + + +/* wrappers around usb_control_msg() for the most common standard requests */ +extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, + unsigned char descindex, void *buf, int size); +extern int usb_get_status(struct usb_device *dev, + int type, int target, void *data); +extern int usb_get_string(struct usb_device *dev, + unsigned short langid, unsigned char index, void *buf, int size); +extern int usb_string(struct usb_device *dev, int index, + char *buf, size_t size); + +/* wrappers that also update important state inside usbcore */ +extern int usb_clear_halt(struct usb_device *dev, int pipe); +extern int usb_reset_configuration(struct usb_device *dev); +extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); + +/* + * timeouts, in milliseconds, used for sending/receiving control messages + * they typically complete within a few frames (msec) after they're issued + * USB identifies 5 second timeouts, maybe more in a few cases, and a few + * slow devices (like some MGE Ellipse UPSes) actually push that limit. + */ +#define USB_CTRL_GET_TIMEOUT 5000 +#define USB_CTRL_SET_TIMEOUT 5000 + + +/** + * struct usb_sg_request - support for scatter/gather I/O + * @status: zero indicates success, else negative errno + * @bytes: counts bytes transferred. + * + * These requests are initialized using usb_sg_init(), and then are used + * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most + * members of the request object aren't for driver access. + * + * The status and bytecount values are valid only after usb_sg_wait() + * returns. If the status is zero, then the bytecount matches the total + * from the request. + * + * After an error completion, drivers may need to clear a halt condition + * on the endpoint. + */ +struct usb_sg_request { + int status; + size_t bytes; + + /* + * members below are private to usbcore, + * and are not provided for driver access! + */ + spinlock_t lock; + + struct usb_device *dev; + int pipe; + struct scatterlist *sg; + int nents; + + int entries; + struct urb **urbs; + + int count; + struct completion complete; +}; + +int usb_sg_init ( + struct usb_sg_request *io, + struct usb_device *dev, + unsigned pipe, + unsigned period, + struct scatterlist *sg, + int nents, + size_t length, + int mem_flags +); +void usb_sg_cancel (struct usb_sg_request *io); +void usb_sg_wait (struct usb_sg_request *io); + + +/* -------------------------------------------------------------------------- */ + +/* + * For various legacy reasons, Linux has a small cookie that's paired with + * a struct usb_device to identify an endpoint queue. Queue characteristics + * are defined by the endpoint's descriptor. This cookie is called a "pipe", + * an unsigned int encoded as: + * + * - direction: bit 7 (0 = Host-to-Device [Out], + * 1 = Device-to-Host [In] ... + * like endpoint bEndpointAddress) + * - device address: bits 8-14 ... bit positions known to uhci-hcd + * - endpoint: bits 15-18 ... bit positions known to uhci-hcd + * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, + * 10 = control, 11 = bulk) + * + * Given the device address and endpoint descriptor, pipes are redundant. + */ + +/* NOTE: these are not the standard USB_ENDPOINT_XFER_* values!! */ +/* (yet ... they're the values used by usbfs) */ +#define PIPE_ISOCHRONOUS 0 +#define PIPE_INTERRUPT 1 +#define PIPE_CONTROL 2 +#define PIPE_BULK 3 + +#define usb_pipein(pipe) ((pipe) & USB_DIR_IN) +#define usb_pipeout(pipe) (!usb_pipein(pipe)) + +#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f) +#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf) + +#define usb_pipetype(pipe) (((pipe) >> 30) & 3) +#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS) +#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT) +#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) +#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) + +/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ +#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) +#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) +#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | ((bit) << (ep))) + + +static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) +{ + return (dev->devnum << 8) | (endpoint << 15); +} + +/* Create various pipes... */ +#define usb_sndctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvctrlpipe(dev,endpoint) ((PIPE_CONTROL << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvisocpipe(dev,endpoint) ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvbulkpipe(dev,endpoint) ((PIPE_BULK << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) +#define usb_sndintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint)) +#define usb_rcvintpipe(dev,endpoint) ((PIPE_INTERRUPT << 30) | __create_pipe(dev,endpoint) | USB_DIR_IN) + +/*-------------------------------------------------------------------------*/ + +static inline __u16 +usb_maxpacket(struct usb_device *udev, int pipe, int is_out) +{ + struct usb_host_endpoint *ep; + unsigned epnum = usb_pipeendpoint(pipe); + + if (is_out) { + WARN_ON(usb_pipein(pipe)); + ep = udev->ep_out[epnum]; + } else { + WARN_ON(usb_pipeout(pipe)); + ep = udev->ep_in[epnum]; + } + if (!ep) + return 0; + + /* NOTE: only 0x07ff bits are for packet size... */ + return le16_to_cpu(ep->desc.wMaxPacketSize); +} + +/* -------------------------------------------------------------------------- */ + +#ifdef DEBUG +#define dbg(format, arg...) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg) +#else +#define dbg(format, arg...) do {} while (0) +#endif + +#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , __FILE__ , ## arg) +#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , __FILE__ , ## arg) +#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , __FILE__ , ## arg) + + +#endif /* __KERNEL__ */ + +#endif |
