diff options
Diffstat (limited to 'include/linux/umem.h')
| -rw-r--r-- | include/linux/umem.h | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/include/linux/umem.h b/include/linux/umem.h new file mode 100644 index 0000000..f36ebfc --- /dev/null +++ b/include/linux/umem.h @@ -0,0 +1,138 @@ + +/* + * This file contains defines for the + * Micro Memory MM5415 + * family PCI Memory Module with Battery Backup. + * + * Copyright Micro Memory INC 2001. All rights reserved. + * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2. + * See the file COPYING. + */ + +#ifndef _DRIVERS_BLOCK_MM_H +#define _DRIVERS_BLOCK_MM_H + + +#define IRQ_TIMEOUT (1 * HZ) + +/* CSR register definition */ +#define MEMCTRLSTATUS_MAGIC 0x00 +#define MM_MAGIC_VALUE (unsigned char)0x59 + +#define MEMCTRLSTATUS_BATTERY 0x04 +#define BATTERY_1_DISABLED 0x01 +#define BATTERY_1_FAILURE 0x02 +#define BATTERY_2_DISABLED 0x04 +#define BATTERY_2_FAILURE 0x08 + +#define MEMCTRLSTATUS_MEMORY 0x07 +#define MEM_128_MB 0xfe +#define MEM_256_MB 0xfc +#define MEM_512_MB 0xf8 +#define MEM_1_GB 0xf0 +#define MEM_2_GB 0xe0 + +#define MEMCTRLCMD_LEDCTRL 0x08 +#define LED_REMOVE 2 +#define LED_FAULT 4 +#define LED_POWER 6 +#define LED_FLIP 255 +#define LED_OFF 0x00 +#define LED_ON 0x01 +#define LED_FLASH_3_5 0x02 +#define LED_FLASH_7_0 0x03 +#define LED_POWER_ON 0x00 +#define LED_POWER_OFF 0x01 +#define USER_BIT1 0x01 +#define USER_BIT2 0x02 + +#define MEMORY_INITIALIZED USER_BIT1 + +#define MEMCTRLCMD_ERRCTRL 0x0C +#define EDC_NONE_DEFAULT 0x00 +#define EDC_NONE 0x01 +#define EDC_STORE_READ 0x02 +#define EDC_STORE_CORRECT 0x03 + +#define MEMCTRLCMD_ERRCNT 0x0D +#define MEMCTRLCMD_ERRSTATUS 0x0E + +#define ERROR_DATA_LOG 0x20 +#define ERROR_ADDR_LOG 0x28 +#define ERROR_COUNT 0x3D +#define ERROR_SYNDROME 0x3E +#define ERROR_CHECK 0x3F + +#define DMA_PCI_ADDR 0x40 +#define DMA_LOCAL_ADDR 0x48 +#define DMA_TRANSFER_SIZE 0x50 +#define DMA_DESCRIPTOR_ADDR 0x58 +#define DMA_SEMAPHORE_ADDR 0x60 +#define DMA_STATUS_CTRL 0x68 +#define DMASCR_GO 0x00001 +#define DMASCR_TRANSFER_READ 0x00002 +#define DMASCR_CHAIN_EN 0x00004 +#define DMASCR_SEM_EN 0x00010 +#define DMASCR_DMA_COMP_EN 0x00020 +#define DMASCR_CHAIN_COMP_EN 0x00040 +#define DMASCR_ERR_INT_EN 0x00080 +#define DMASCR_PARITY_INT_EN 0x00100 +#define DMASCR_ANY_ERR 0x00800 +#define DMASCR_MBE_ERR 0x01000 +#define DMASCR_PARITY_ERR_REP 0x02000 +#define DMASCR_PARITY_ERR_DET 0x04000 +#define DMASCR_SYSTEM_ERR_SIG 0x08000 +#define DMASCR_TARGET_ABT 0x10000 +#define DMASCR_MASTER_ABT 0x20000 +#define DMASCR_DMA_COMPLETE 0x40000 +#define DMASCR_CHAIN_COMPLETE 0x80000 + +/* +3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE +READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA +TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE +TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS +(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, +AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING +DMA READ OPERATIONS. +*/ +#define DMASCR_READ 0x60000000 +#define DMASCR_READLINE 0xE0000000 +#define DMASCR_READMULTI 0xC0000000 + + +#define DMASCR_ERROR_MASK (DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR) +#define DMASCR_HARD_ERROR (DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR) + +#define WINDOWMAP_WINNUM 0x7B + +#define DMA_READ_FROM_HOST 0 +#define DMA_WRITE_TO_HOST 1 + +struct mm_dma_desc { + __le64 pci_addr; + __le64 local_addr; + __le32 transfer_size; + u32 zero1; + __le64 next_desc_addr; + __le64 sem_addr; + __le32 control_bits; + u32 zero2; + + dma_addr_t data_dma_handle; + + /* Copy of the bits */ + __le64 sem_control_bits; +} __attribute__((aligned(8))); + +#define PCI_VENDOR_ID_MICRO_MEMORY 0x1332 +#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN 0x5415 +#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN 0x5425 +#define PCI_DEVICE_ID_MICRO_MEMORY_6155 0x6155 + +/* bits for card->flags */ +#define UM_FLAG_DMA_IN_REGS 1 +#define UM_FLAG_NO_BYTE_STATUS 2 +#define UM_FLAG_NO_BATTREG 4 +#define UM_FLAG_NO_BATT 8 +#endif |
