diff options
Diffstat (limited to 'include/linux/ssb')
| -rw-r--r-- | include/linux/ssb/ssb.h | 50 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_driver_chipcommon.h | 7 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_driver_gige.h | 174 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_driver_pci.h | 19 |
4 files changed, 243 insertions, 7 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index db53def..50dfd0d 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -72,10 +72,18 @@ struct ssb_device; /* Lowlevel read/write operations on the device MMIO. * Internal, don't use that outside of ssb. */ struct ssb_bus_ops { + u8 (*read8)(struct ssb_device *dev, u16 offset); u16 (*read16)(struct ssb_device *dev, u16 offset); u32 (*read32)(struct ssb_device *dev, u16 offset); + void (*write8)(struct ssb_device *dev, u16 offset, u8 value); void (*write16)(struct ssb_device *dev, u16 offset, u16 value); void (*write32)(struct ssb_device *dev, u16 offset, u32 value); +#ifdef CONFIG_SSB_BLOCKIO + void (*block_read)(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif }; @@ -247,9 +255,9 @@ struct ssb_bus { /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ struct pcmcia_device *host_pcmcia; -#ifdef CONFIG_SSB_PCIHOST +#ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ - struct mutex pci_sprom_mutex; + struct mutex sprom_mutex; #endif /* ID information about the Chip. */ @@ -262,9 +270,6 @@ struct ssb_bus { struct ssb_device devices[SSB_MAX_NR_CORES]; u8 nr_devices; - /* Reference count. Number of suspended devices. */ - u8 suspend_cnt; - /* Software ID number for this bus. */ unsigned int busnumber; @@ -336,6 +341,13 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, extern void ssb_bus_unregister(struct ssb_bus *bus); +/* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +extern int ssb_bus_suspend(struct ssb_bus *bus); +/* Resume a SSB bus. + * Call this from the parent bus resume routine. */ +extern int ssb_bus_resume(struct ssb_bus *bus); + extern u32 ssb_clockspeed(struct ssb_bus *bus); /* Is the device enabled in hardware? */ @@ -348,6 +360,10 @@ void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); /* Device MMIO register read/write functions. */ +static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read8(dev, offset); +} static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) { return dev->ops->read16(dev, offset); @@ -356,6 +372,10 @@ static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) { return dev->ops->read32(dev, offset); } +static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) +{ + dev->ops->write8(dev, offset, value); +} static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) { dev->ops->write16(dev, offset, value); @@ -364,6 +384,19 @@ static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) { dev->ops->write32(dev, offset, value); } +#ifdef CONFIG_SSB_BLOCKIO +static inline void ssb_block_read(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_read(dev, buffer, count, offset, reg_width); +} + +static inline void ssb_block_write(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + dev->ops->block_write(dev, buffer, count, offset, reg_width); +} +#endif /* CONFIG_SSB_BLOCKIO */ /* Translation (routing) bits that need to be ORed to DMA @@ -416,5 +449,12 @@ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); extern u32 ssb_admatch_base(u32 adm); extern u32 ssb_admatch_size(u32 adm); +/* PCI device mapping and fixup routines. + * Called from the architecture pcibios init code. + * These are only available on SSB_EMBEDDED configurations. */ +#ifdef CONFIG_SSB_EMBEDDED +int ssb_pcibios_plat_dev_init(struct pci_dev *dev); +int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +#endif /* CONFIG_SSB_EMBEDDED */ #endif /* LINUX_SSB_H_ */ diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 536851b..7d7e03d 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -367,8 +367,7 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); -#include <linux/pm.h> -extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state); +extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); extern void ssb_chipco_resume(struct ssb_chipcommon *cc); extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, @@ -390,6 +389,10 @@ extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks); +void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); + +u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask); + /* Chipcommon GPIO pin access. */ u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask); u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value); diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h new file mode 100644 index 0000000..01fbdf5f --- /dev/null +++ b/include/linux/ssb/ssb_driver_gige.h @@ -0,0 +1,174 @@ +#ifndef LINUX_SSB_DRIVER_GIGE_H_ +#define LINUX_SSB_DRIVER_GIGE_H_ + +#include <linux/ssb/ssb.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + + +#ifdef CONFIG_SSB_DRIVER_GIGE + + +#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ +#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ +#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ +#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ +#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ +#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ +#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ +#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ +#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ + +/* TM Status High flags */ +#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ +/* TM Status Low flags */ +#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */ +#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */ + +/* Boardflags (low) */ +#define SSB_GIGE_BFL_ROBOSWITCH 0x0010 + + +#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory" +#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O" + +struct ssb_gige { + struct ssb_device *dev; + + spinlock_t lock; + + /* True, if the device has an RGMII bus. + * False, if the device has a GMII bus. */ + bool has_rgmii; + + /* The PCI controller device. */ + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; + +/* Check whether a PCI device is a SSB Gigabit Ethernet core. */ +extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev); + +/* Convert a pci_dev pointer to a ssb_gige pointer. */ +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + if (!pdev_is_ssb_gige_core(pdev)) + return NULL; + return container_of(pdev->bus->ops, struct ssb_gige, pci_ops); +} + +/* Returns whether the PHY is connected by an RGMII bus. */ +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + return (dev ? dev->has_rgmii : 0); +} + +/* Returns whether we have a Roboswitch. */ +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return !!(dev->dev->bus->sprom.boardflags_lo & + SSB_GIGE_BFL_ROBOSWITCH); + return 0; +} + +/* Returns whether we can only do one DMA at once. */ +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return ((dev->dev->bus->chip_id == 0x4785) && + (dev->dev->bus->chip_rev < 2)); + return 0; +} + +/* Returns whether we must flush posted writes. */ +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + struct ssb_gige *dev = pdev_to_ssb_gige(pdev); + if (dev) + return (dev->dev->bus->chip_id == 0x4785); + return 0; +} + +extern char * nvram_get(const char *name); +/* Get the device MAC address */ +static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) +{ +#ifdef CONFIG_BCM947XX + char *res = nvram_get("et0macaddr"); + if (res) + memcpy(macaddr, res, 6); +#endif +} + +extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev); +extern int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev); + +/* The GigE driver is not a standalone module, because we don't have support + * for unregistering the driver. So we could not unload the module anyway. */ +extern int ssb_gige_init(void); +static inline void ssb_gige_exit(void) +{ + /* Currently we can not unregister the GigE driver, + * because we can not unregister the PCI bridge. */ + BUG(); +} + + +#else /* CONFIG_SSB_DRIVER_GIGE */ +/* Gigabit Ethernet driver disabled */ + + +static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev) +{ + return -ENOSYS; +} +static inline int ssb_gige_init(void) +{ + return 0; +} +static inline void ssb_gige_exit(void) +{ +} + +static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev) +{ + return 0; +} +static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) +{ + return NULL; +} +static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) +{ + return 0; +} +static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) +{ + return 0; +} + +#endif /* CONFIG_SSB_DRIVER_GIGE */ +#endif /* LINUX_SSB_DRIVER_GIGE_H_ */ diff --git a/include/linux/ssb/ssb_driver_pci.h b/include/linux/ssb/ssb_driver_pci.h index 5e25bac..41e330e 100644 --- a/include/linux/ssb/ssb_driver_pci.h +++ b/include/linux/ssb/ssb_driver_pci.h @@ -1,6 +1,11 @@ #ifndef LINUX_SSB_PCICORE_H_ #define LINUX_SSB_PCICORE_H_ +#include <linux/types.h> + +struct pci_dev; + + #ifdef CONFIG_SSB_DRIVER_PCICORE /* PCI core registers. */ @@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_pcicore *pc); extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, struct ssb_device *dev); +int ssb_pcicore_plat_dev_init(struct pci_dev *d); +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + #else /* CONFIG_SSB_DRIVER_PCICORE */ @@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, return 0; } +static inline +int ssb_pcicore_plat_dev_init(struct pci_dev *d) +{ + return -ENODEV; +} +static inline +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return -ENODEV; +} + #endif /* CONFIG_SSB_DRIVER_PCICORE */ #endif /* LINUX_SSB_PCICORE_H_ */ |
