diff options
Diffstat (limited to 'include/linux/printk.h')
| -rw-r--r-- | include/linux/printk.h | 248 |
1 files changed, 248 insertions, 0 deletions
diff --git a/include/linux/printk.h b/include/linux/printk.h new file mode 100644 index 0000000..b772ca5 --- /dev/null +++ b/include/linux/printk.h @@ -0,0 +1,248 @@ +#ifndef __KERNEL_PRINTK__ +#define __KERNEL_PRINTK__ + +extern const char linux_banner[]; +extern const char linux_proc_banner[]; + +#define KERN_EMERG "<0>" /* system is unusable */ +#define KERN_ALERT "<1>" /* action must be taken immediately */ +#define KERN_CRIT "<2>" /* critical conditions */ +#define KERN_ERR "<3>" /* error conditions */ +#define KERN_WARNING "<4>" /* warning conditions */ +#define KERN_NOTICE "<5>" /* normal but significant condition */ +#define KERN_INFO "<6>" /* informational */ +#define KERN_DEBUG "<7>" /* debug-level messages */ + +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "<d>" +/* + * Annotation for a "continued" line of log printout (only done after a + * line that had no enclosing \n). Only to be used by core/arch code + * during early bootup (a continued line is not SMP-safe otherwise). + */ +#define KERN_CONT "<c>" + +extern int console_printk[]; + +#define console_loglevel (console_printk[0]) +#define default_message_loglevel (console_printk[1]) +#define minimum_console_loglevel (console_printk[2]) +#define default_console_loglevel (console_printk[3]) + +struct va_format { + const char *fmt; + va_list *va; +}; + +/* + * FW_BUG + * Add this to a message where you are sure the firmware is buggy or behaves + * really stupid or out of spec. Be aware that the responsible BIOS developer + * should be able to fix this issue or at least get a concrete idea of the + * problem by reading your message without the need of looking at the kernel + * code. + * + * Use it for definite and high priority BIOS bugs. + * + * FW_WARN + * Use it for not that clear (e.g. could the kernel messed up things already?) + * and medium priority BIOS bugs. + * + * FW_INFO + * Use this one if you want to tell the user or vendor about something + * suspicious, but generally harmless related to the firmware. + * + * Use it for information or very low priority BIOS bugs. + */ +#define FW_BUG "[Firmware Bug]: " +#define FW_WARN "[Firmware Warn]: " +#define FW_INFO "[Firmware Info]: " + +/* + * HW_ERR + * Add this to a message for hardware errors, so that user can report + * it to hardware vendor instead of LKML or software vendor. + */ +#define HW_ERR "[Hardware Error]: " + +#ifdef CONFIG_PRINTK +asmlinkage int vprintk(const char *fmt, va_list args) + __attribute__ ((format (printf, 1, 0))); +asmlinkage int printk(const char * fmt, ...) + __attribute__ ((format (printf, 1, 2))) __cold; + +/* + * Please don't use printk_ratelimit(), because it shares ratelimiting state + * with all other unrelated printk_ratelimit() callsites. Instead use + * printk_ratelimited() or plain old __ratelimit(). + */ +extern int __printk_ratelimit(const char *func); +#define printk_ratelimit() __printk_ratelimit(__func__) +extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, + unsigned int interval_msec); + +extern int printk_delay_msec; +extern int dmesg_restrict; + +/* + * Print a one-time message (analogous to WARN_ONCE() et al): + */ +#define printk_once(x...) ({ \ + static bool __print_once; \ + \ + if (!__print_once) { \ + __print_once = true; \ + printk(x); \ + } \ +}) + +void log_buf_kexec_setup(void); +#else +static inline int vprintk(const char *s, va_list args) + __attribute__ ((format (printf, 1, 0))); +static inline int vprintk(const char *s, va_list args) { return 0; } +static inline int printk(const char *s, ...) + __attribute__ ((format (printf, 1, 2))); +static inline int __cold printk(const char *s, ...) { return 0; } +static inline int printk_ratelimit(void) { return 0; } +static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ + unsigned int interval_msec) \ + { return false; } + +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_once(x...) printk(x) + +static inline void log_buf_kexec_setup(void) +{ +} +#endif + +/* + * Dummy printk for disabled debugging statements to use whilst maintaining + * gcc's format and side-effect checking. + */ +static inline __attribute__ ((format (printf, 1, 2))) +int no_printk(const char *s, ...) { return 0; } + +extern int printk_needs_cpu(int cpu); +extern void printk_tick(void); + +extern void asmlinkage __attribute__((format(printf, 1, 2))) + early_printk(const char *fmt, ...); + +static inline void console_silent(void) +{ + console_loglevel = 0; +} + +static inline void console_verbose(void) +{ + if (console_loglevel) + console_loglevel = 15; +} + +extern void dump_stack(void) __cold; + +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +extern void hex_dump_to_buffer(const void *buf, size_t len, + int rowsize, int groupsize, + char *linebuf, size_t linebuflen, bool ascii); +extern void print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, + const void *buf, size_t len); + +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn pr_warning +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) + +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#elif defined(CONFIG_DYNAMIC_DEBUG) +/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ +#define pr_debug(fmt, ...) \ + dynamic_pr_debug(fmt, ##__VA_ARGS__) +#else +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + +/* + * ratelimited messages with local ratelimit_state, + * no local ratelimit_state used in the !PRINTK case + */ +#ifdef CONFIG_PRINTK +#define printk_ratelimited(fmt, ...) ({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + \ + if (__ratelimit(&_rs)) \ + printk(fmt, ##__VA_ARGS__); \ +}) +#else +/* No effect, but we still get type checking even in the !PRINTK case: */ +#define printk_ratelimited printk +#endif + +#define pr_emerg_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warn_ratelimited pr_warning_ratelimited +#define pr_notice_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) +/* no pr_cont_ratelimited, don't do that... */ +/* If you are writing a driver, please use dev_dbg instead */ +#if defined(DEBUG) +#define pr_debug_ratelimited(fmt, ...) \ + printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_debug_ratelimited(fmt, ...) \ + ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ + ##__VA_ARGS__); 0; }) +#endif + +#endif |
