diff options
Diffstat (limited to 'include/linux/mtd')
| -rw-r--r-- | include/linux/mtd/cfi.h | 85 | ||||
| -rw-r--r-- | include/linux/mtd/flashchip.h | 7 | ||||
| -rw-r--r-- | include/linux/mtd/inftl.h | 4 | ||||
| -rw-r--r-- | include/linux/mtd/map.h | 33 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 15 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 48 | ||||
| -rw-r--r-- | include/linux/mtd/plat-ram.h | 35 | ||||
| -rw-r--r-- | include/linux/mtd/xip.h | 31 |
8 files changed, 209 insertions, 49 deletions
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 2ed8c58..e6b6a1c 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -1,7 +1,7 @@ /* Common Flash Interface structures * See http://support.intel.com/design/flash/technote/index.htm - * $Id: cfi.h,v 1.50 2004/11/20 12:46:51 dwmw2 Exp $ + * $Id: cfi.h,v 1.54 2005/06/06 23:04:36 tpoynor Exp $ */ #ifndef __MTD_CFI_H__ @@ -148,6 +148,14 @@ struct cfi_pri_intelext { uint8_t extra[0]; } __attribute__((packed)); +struct cfi_intelext_otpinfo { + uint32_t ProtRegAddr; + uint16_t FactGroups; + uint8_t FactProtRegSize; + uint16_t UserGroups; + uint8_t UserProtRegSize; +} __attribute__((packed)); + struct cfi_intelext_blockinfo { uint16_t NumIdentBlocks; uint16_t BlockSize; @@ -244,7 +252,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int * It looks too long to be inline, but in the common case it should almost all * get optimised away. */ -static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cfi_private *cfi) +static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) { map_word val = { {0} }; int wordwidth, words_per_bus, chip_mode, chips_per_word; @@ -307,6 +315,69 @@ static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cf } #define CMD(x) cfi_build_cmd((x), map, cfi) + +static inline unsigned char cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi) +{ + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onestat, res = 0; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + onestat = val.x[0]; + /* Or all status words together */ + for (i=1; i < words_per_bus; i++) { + onestat |= val.x[i]; + } + + res = onestat; + switch(chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + res |= (onestat >> (chip_mode * 32)); +#endif + case 4: + res |= (onestat >> (chip_mode * 16)); + case 2: + res |= (onestat >> (chip_mode * 8)); + case 1: + ; + } + + /* Last, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + case 1: + break; + case 2: + res = cfi16_to_cpu(res); + break; + case 4: + res = cfi32_to_cpu(res); + break; + default: BUG(); + } + return res; +} + +#define MERGESTATUS(x) cfi_merge_status((x), map, cfi) + + /* * Sends a CFI command to a bank of flash for the given geometry. * @@ -357,16 +428,6 @@ static inline void cfi_udelay(int us) } } -static inline void cfi_spin_lock(spinlock_t *mutex) -{ - spin_lock_bh(mutex); -} - -static inline void cfi_spin_unlock(spinlock_t *mutex) -{ - spin_unlock_bh(mutex); -} - struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size, const char* name); struct cfi_fixup { diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h index c66ba81..675776f 100644 --- a/include/linux/mtd/flashchip.h +++ b/include/linux/mtd/flashchip.h @@ -6,7 +6,7 @@ * * (C) 2000 Red Hat. GPLd. * - * $Id: flashchip.h,v 1.15 2004/11/05 22:41:06 nico Exp $ + * $Id: flashchip.h,v 1.17 2005/03/14 18:27:15 bjd Exp $ * */ @@ -29,6 +29,7 @@ typedef enum { FL_ERASE_SUSPENDED, FL_WRITING, FL_WRITING_TO_BUFFER, + FL_OTP_WRITE, FL_WRITE_SUSPENDING, FL_WRITE_SUSPENDED, FL_PM_SUSPENDED, @@ -62,8 +63,8 @@ struct flchip { flstate_t state; flstate_t oldstate; - int write_suspended:1; - int erase_suspended:1; + unsigned int write_suspended:1; + unsigned int erase_suspended:1; unsigned long in_progress_block_addr; spinlock_t *mutex; diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h index b52c8cb..0268125 100644 --- a/include/linux/mtd/inftl.h +++ b/include/linux/mtd/inftl.h @@ -3,7 +3,7 @@ * * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) * - * $Id: inftl.h,v 1.6 2004/06/30 14:49:00 dbrown Exp $ + * $Id: inftl.h,v 1.7 2005/06/13 13:08:45 sean Exp $ */ #ifndef __MTD_INFTL_H__ @@ -20,7 +20,7 @@ #include <mtd/inftl-user.h> #ifndef INFTL_MAJOR -#define INFTL_MAJOR 94 +#define INFTL_MAJOR 96 #endif #define INFTL_PARTN_BITS 4 diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index f0268b9..142963f 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -1,6 +1,6 @@ /* Overhauled routines for dealing with different mmap regions of flash */ -/* $Id: map.h,v 1.46 2005/01/05 17:09:44 dwmw2 Exp $ */ +/* $Id: map.h,v 1.52 2005/05/25 10:29:41 gleixner Exp $ */ #ifndef __LINUX_MTD_MAP_H__ #define __LINUX_MTD_MAP_H__ @@ -263,6 +263,17 @@ static inline map_word map_word_and(struct map_info *map, map_word val1, map_wor return r; } +static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2) +{ + map_word r; + int i; + + for (i=0; i<map_words(map); i++) { + r.x[i] = val1.x[i] & ~val2.x[i]; + } + return r; +} + static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2) { map_word r; @@ -273,6 +284,7 @@ static inline map_word map_word_or(struct map_info *map, map_word val1, map_word } return r; } + #define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b)) static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2) @@ -328,16 +340,27 @@ static inline map_word map_word_load_partial(struct map_info *map, map_word orig return orig; } +#if BITS_PER_LONG < 64 +#define MAP_FF_LIMIT 4 +#else +#define MAP_FF_LIMIT 8 +#endif + static inline map_word map_word_ff(struct map_info *map) { map_word r; int i; - - for (i=0; i<map_words(map); i++) { - r.x[i] = ~0UL; + + if (map_bankwidth(map) < MAP_FF_LIMIT) { + int bw = 8 * map_bankwidth(map); + r.x[0] = (1 << bw) - 1; + } else { + for (i=0; i<map_words(map); i++) + r.x[i] = ~0UL; } return r; } + static inline map_word inline_map_read(struct map_info *map, unsigned long ofs) { map_word r; @@ -405,7 +428,7 @@ extern void simple_map_init(struct map_info *); #define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth)) -#define map_is_linear(map) (1) +#define map_is_linear(map) ({ (void)(map); 1; }) #endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index b3d1343..c50c3f3 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -1,5 +1,5 @@ /* - * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $ + * $Id: mtd.h,v 1.59 2005/04/11 10:19:02 gleixner Exp $ * * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. * @@ -18,6 +18,7 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/uio.h> +#include <linux/notifier.h> #include <linux/mtd/compatmac.h> #include <mtd/mtd-abi.h> @@ -69,7 +70,6 @@ struct mtd_info { u_int32_t oobblock; // Size of OOB blocks (e.g. 512) u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) - u_int32_t oobavail; // Number of bytes in OOB area available for fs u_int32_t ecctype; u_int32_t eccsize; @@ -80,6 +80,7 @@ struct mtd_info { // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) struct nand_oobinfo oobinfo; + u_int32_t oobavail; // Number of bytes in OOB area available for fs /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. @@ -113,12 +114,12 @@ struct mtd_info { * flash devices. The user data is one time programmable but the * factory data is read only. */ - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - + int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - - /* This function is not yet implemented */ + int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); + int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); /* kvec-based read/write methods. We need these especially for NAND flash, with its limited number of write cycles per erase. @@ -147,6 +148,8 @@ struct mtd_info { int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); + struct notifier_block reboot_notifier; /* default mode before reboot */ + void *priv; struct module *owner; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 9a19c65..9b5b762 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -5,7 +5,7 @@ * Steven J. Hill <sjhill@realitydiluted.com> * Thomas Gleixner <tglx@linutronix.de> * - * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $ + * $Id: nand.h,v 1.73 2005/05/31 19:39:17 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -48,6 +48,10 @@ * 02-08-2004 tglx added option field to nand structure for chip anomalities * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id * update of nand_chip structure description + * 01-17-2005 dmarlin added extended commands for AG-AND device and added option + * for BBT_AUTO_REFRESH. + * 01-20-2005 dmarlin added optional pointer to hardware specific callback for + * extra error status checks. */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H @@ -115,6 +119,25 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ #define NAND_CMD_READSTART 0x30 #define NAND_CMD_CACHEDPROG 0x15 +/* Extended commands for AG-AND device */ +/* + * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but + * there is no way to distinguish that from NAND_CMD_READ0 + * until the remaining sequence of commands has been completed + * so add a high order bit and mask it off in the command. + */ +#define NAND_CMD_DEPLETE1 0x100 +#define NAND_CMD_DEPLETE2 0x38 +#define NAND_CMD_STATUS_MULTI 0x71 +#define NAND_CMD_STATUS_ERROR 0x72 +/* multi-bank error status (banks 0-3) */ +#define NAND_CMD_STATUS_ERROR0 0x73 +#define NAND_CMD_STATUS_ERROR1 0x74 +#define NAND_CMD_STATUS_ERROR2 0x75 +#define NAND_CMD_STATUS_ERROR3 0x76 +#define NAND_CMD_STATUS_RESET 0x7f +#define NAND_CMD_STATUS_CLEAR 0xff + /* Status bits */ #define NAND_STATUS_FAIL 0x01 #define NAND_STATUS_FAIL_N1 0x02 @@ -143,7 +166,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ /* * Constants for Hardware ECC -*/ + */ /* Reset Hardware ECC for read */ #define NAND_ECC_READ 0 /* Reset Hardware ECC for write */ @@ -151,6 +174,10 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ /* Enable Hardware ECC before syndrom is read back from flash */ #define NAND_ECC_READSYN 2 +/* Bit mask for flags passed to do_nand_read_ecc */ +#define NAND_GET_DEVICE 0x80 + + /* Option constants for bizarre disfunctionality and real * features */ @@ -170,6 +197,10 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ /* Chip has a array of 4 pages which can be read without * additional ready /busy waits */ #define NAND_4PAGE_ARRAY 0x00000040 +/* Chip requires that BBT is periodically rewritten to prevent + * bits from adjacent blocks from 'leaking' in altering data. + * This happens with the Renesas AG-AND chips, possibly others. */ +#define BBT_AUTO_REFRESH 0x00000080 /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -192,7 +223,8 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_ * This can only work if we have the ecc bytes directly behind the * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ #define NAND_HWECC_SYNDROME 0x00020000 - +/* This option skips the bbt scan during initialization. */ +#define NAND_SKIP_BBTSCAN 0x00040000 /* Options set by nand scan */ /* Nand scan has allocated oob_buf */ @@ -221,10 +253,13 @@ struct nand_chip; * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices * @lock: protection lock * @active: the mtd device which holds the controller currently + * @wq: wait queue to sleep on if a NAND operation is in progress + * used instead of the per chip wait queue when a hw controller is available */ struct nand_hw_control { spinlock_t lock; struct nand_chip *active; + wait_queue_head_t wq; }; /** @@ -283,6 +318,8 @@ struct nand_hw_control { * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices * @priv: [OPTIONAL] pointer to private chip date + * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks + * (determine if errors are correctable) */ struct nand_chip { @@ -338,6 +375,7 @@ struct nand_chip { struct nand_bbt_descr *badblock_pattern; struct nand_hw_control *controller; void *priv; + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); }; /* @@ -349,6 +387,7 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_HYNIX 0xad /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -459,6 +498,9 @@ extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); extern int nand_default_bbt (struct mtd_info *mtd); extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); +extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf, u_char * oob_buf, + struct nand_oobinfo *oobsel, int flags); /* * Constants for oob configuration diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h new file mode 100644 index 0000000..2332eda --- /dev/null +++ b/include/linux/mtd/plat-ram.h @@ -0,0 +1,35 @@ +/* linux/include/mtd/plat-ram.h + * + * (c) 2004 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks <ben@simtec.co.uk> + * + * Generic platform device based RAM map + * + * $Id: plat-ram.h,v 1.2 2005/01/24 00:37:40 bjd Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_MTD_PLATRAM_H +#define __LINUX_MTD_PLATRAM_H __FILE__ + +#define PLATRAM_RO (0) +#define PLATRAM_RW (1) + +struct platdata_mtd_ram { + char *mapname; + char **probes; + struct mtd_partition *partitions; + int nr_partitions; + int bankwidth; + + /* control callbacks */ + + void (*set_rw)(struct device *dev, int to); +}; + +#endif /* __LINUX_MTD_PLATRAM_H */ diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h index fc07112..7b7deef 100644 --- a/include/linux/mtd/xip.h +++ b/include/linux/mtd/xip.h @@ -58,22 +58,16 @@ * returned value is <= the real elapsed time. * note 2: this should be able to cope with a few seconds without * overflowing. + * + * xip_iprefetch() + * + * Macro to fill instruction prefetch + * e.g. a series of nops: asm volatile (".rep 8; nop; .endr"); */ -#if defined(CONFIG_ARCH_SA1100) || defined(CONFIG_ARCH_PXA) - -#include <asm/hardware.h> -#ifdef CONFIG_ARCH_PXA -#include <asm/arch/pxa-regs.h> -#endif - -#define xip_irqpending() (ICIP & ICMR) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) +#include <asm/mtd-xip.h> -#else +#ifndef xip_irqpending #warning "missing IRQ and timer primitives for XIP MTD support" #warning "some of the XIP MTD support code will be disabled" @@ -85,16 +79,17 @@ #endif +#ifndef xip_iprefetch +#define xip_iprefetch() do { } while (0) +#endif + /* * xip_cpu_idle() is used when waiting for a delay equal or larger than * the system timer tick period. This should put the CPU into idle mode * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. + * This should not rely upon standard kernel code. */ - -#if defined(CONFIG_CPU_XSCALE) -#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) -#else +#ifndef xip_cpu_idle #define xip_cpu_idle() do { } while (0) #endif |
