summaryrefslogtreecommitdiffstats
path: root/include/linux/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mmc')
-rw-r--r--include/linux/mmc/card.h30
-rw-r--r--include/linux/mmc/core.h21
-rw-r--r--include/linux/mmc/host.h52
-rw-r--r--include/linux/mmc/mmc.h35
-rw-r--r--include/linux/mmc/sd.h5
-rw-r--r--include/linux/mmc/sdhci-pltfm.h35
-rw-r--r--include/linux/mmc/sdhci.h144
-rw-r--r--include/linux/mmc/sdio.h2
-rw-r--r--include/linux/mmc/sdio_ids.h1
9 files changed, 313 insertions, 12 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index d02d2c6..8ce0827 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -24,12 +24,14 @@ struct mmc_cid {
};
struct mmc_csd {
+ unsigned char structure;
unsigned char mmca_vsn;
unsigned short cmdclass;
unsigned short tacc_clks;
unsigned int tacc_ns;
unsigned int r2w_factor;
unsigned int max_dtr;
+ unsigned int erase_size; /* In sectors */
unsigned int read_blkbits;
unsigned int write_blkbits;
unsigned int capacity;
@@ -41,9 +43,17 @@ struct mmc_csd {
struct mmc_ext_csd {
u8 rev;
+ u8 erase_group_def;
+ u8 sec_feature_support;
unsigned int sa_timeout; /* Units: 100ns */
unsigned int hs_max_dtr;
unsigned int sectors;
+ unsigned int card_type;
+ unsigned int hc_erase_size; /* In sectors */
+ unsigned int hc_erase_timeout; /* In milliseconds */
+ unsigned int sec_trim_mult; /* Secure trim multiplier */
+ unsigned int sec_erase_mult; /* Secure erase multiplier */
+ unsigned int trim_timeout; /* In milliseconds */
};
struct sd_scr {
@@ -53,6 +63,12 @@ struct sd_scr {
#define SD_SCR_BUS_WIDTH_4 (1<<2)
};
+struct sd_ssr {
+ unsigned int au; /* In sectors */
+ unsigned int erase_timeout; /* In milliseconds */
+ unsigned int erase_offset; /* In milliseconds */
+};
+
struct sd_switch_caps {
unsigned int hs_max_dtr;
};
@@ -92,15 +108,24 @@ struct mmc_card {
#define MMC_TYPE_MMC 0 /* MMC card */
#define MMC_TYPE_SD 1 /* SD card */
#define MMC_TYPE_SDIO 2 /* SDIO card */
+#define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */
unsigned int state; /* (our) card state */
#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */
#define MMC_STATE_READONLY (1<<1) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */
#define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */
+#define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
/* for byte mode */
+#define MMC_QUIRK_NONSTD_SDIO (1<<2) /* non-standard SDIO card attached */
+ /* (missing CIA registers) */
+
+ unsigned int erase_size; /* erase size in sectors */
+ unsigned int erase_shift; /* if erase unit is power 2 */
+ unsigned int pref_erase; /* in sectors */
+ u8 erased_byte; /* value of erased bytes */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
@@ -109,6 +134,7 @@ struct mmc_card {
struct mmc_csd csd; /* card specific */
struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
+ struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
unsigned int sdio_funcs; /* number of SDIO functions */
@@ -130,11 +156,13 @@ struct mmc_card {
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
+#define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
{
@@ -149,6 +177,8 @@ static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
+#define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev)
+
#define mmc_list_to_card(l) container_of(l, struct mmc_card, node)
#define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev)
#define mmc_set_drvdata(c,d) dev_set_drvdata(&(c)->dev, d)
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index e4898e9..64e013f 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -92,6 +92,8 @@ struct mmc_command {
* actively failing requests
*/
+ unsigned int erase_timeout; /* in milliseconds */
+
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
@@ -134,6 +136,25 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
+#define MMC_ERASE_ARG 0x00000000
+#define MMC_SECURE_ERASE_ARG 0x80000000
+#define MMC_TRIM_ARG 0x00000001
+#define MMC_SECURE_TRIM1_ARG 0x80000001
+#define MMC_SECURE_TRIM2_ARG 0x80008000
+
+#define MMC_SECURE_ARGS 0x80000000
+#define MMC_TRIM_ARGS 0x00008001
+
+extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg);
+extern int mmc_can_erase(struct mmc_card *card);
+extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_secure_erase_trim(struct mmc_card *card);
+extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr);
+
+extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index f65913c..6d87f68 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -50,6 +50,12 @@ struct mmc_ios {
#define MMC_TIMING_LEGACY 0
#define MMC_TIMING_MMC_HS 1
#define MMC_TIMING_SD_HS 2
+
+ unsigned char ddr; /* dual data rate used */
+
+#define MMC_SDR_MODE 0
+#define MMC_1_2V_DDR_MODE 1
+#define MMC_1_8V_DDR_MODE 2
};
struct mmc_host_ops {
@@ -123,7 +129,9 @@ struct mmc_host {
const struct mmc_host_ops *ops;
unsigned int f_min;
unsigned int f_max;
+ unsigned int f_init;
u32 ocr_avail;
+ struct notifier_block pm_notify;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
@@ -155,13 +163,17 @@ struct mmc_host {
#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
+#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */
+#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */
+ /* DDR mode at 1.8V */
+#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
+ /* DDR mode at 1.2V */
mmc_pm_flag_t pm_caps; /* supported pm features */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
- unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */
- unsigned short max_phys_segs; /* see blk_queue_max_phys_segments */
+ unsigned short max_segs; /* see blk_queue_max_segments */
unsigned short unused;
unsigned int max_req_size; /* maximum number of bytes in one req */
unsigned int max_blk_size; /* maximum size of one mmc block */
@@ -183,6 +195,7 @@ struct mmc_host {
/* Only used with MMC_CAP_DISABLE */
int enabled; /* host is enabled */
+ int rescan_disable; /* disable card detection */
int nesting_cnt; /* "enable" nesting count */
int en_dis_recurs; /* detect recursion */
unsigned int disable_delay; /* disable delay in msecs */
@@ -209,6 +222,10 @@ struct mmc_host {
struct led_trigger *led; /* activity led */
#endif
+#ifdef CONFIG_REGULATOR
+ bool regulator_enabled; /* regulator state */
+#endif
+
struct dentry *debugfs_root;
unsigned long private[0] ____cacheline_aligned;
@@ -233,8 +250,8 @@ static inline void *mmc_priv(struct mmc_host *host)
extern int mmc_suspend_host(struct mmc_host *);
extern int mmc_resume_host(struct mmc_host *);
-extern void mmc_power_save_host(struct mmc_host *host);
-extern void mmc_power_restore_host(struct mmc_host *host);
+extern int mmc_power_save_host(struct mmc_host *host);
+extern int mmc_power_restore_host(struct mmc_host *host);
extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
@@ -247,8 +264,24 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host)
struct regulator;
+#ifdef CONFIG_REGULATOR
int mmc_regulator_get_ocrmask(struct regulator *supply);
-int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit);
+int mmc_regulator_set_ocr(struct mmc_host *mmc,
+ struct regulator *supply,
+ unsigned short vdd_bit);
+#else
+static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+ return 0;
+}
+
+static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
+ struct regulator *supply,
+ unsigned short vdd_bit)
+{
+ return 0;
+}
+#endif
int mmc_card_awake(struct mmc_host *host);
int mmc_card_sleep(struct mmc_host *host);
@@ -257,6 +290,7 @@ int mmc_card_can_sleep(struct mmc_host *host);
int mmc_host_enable(struct mmc_host *host);
int mmc_host_disable(struct mmc_host *host);
int mmc_host_lazy_disable(struct mmc_host *host);
+int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
static inline void mmc_set_disable_delay(struct mmc_host *host,
unsigned int disable_delay)
@@ -264,5 +298,13 @@ static inline void mmc_set_disable_delay(struct mmc_host *host,
host->disable_delay = disable_delay;
}
+/* Module parameter */
+extern int mmc_assume_removable;
+
+static inline int mmc_card_is_removable(struct mmc_host *host)
+{
+ return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
+}
+
#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 8a49cbf..956fbd87 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -251,12 +251,21 @@ struct _mmc_csd {
* EXT_CSD fields
*/
-#define EXT_CSD_BUS_WIDTH 183 /* R/W */
-#define EXT_CSD_HS_TIMING 185 /* R/W */
-#define EXT_CSD_CARD_TYPE 196 /* RO */
-#define EXT_CSD_REV 192 /* RO */
-#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
-#define EXT_CSD_S_A_TIMEOUT 217
+#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
+#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_REV 192 /* RO */
+#define EXT_CSD_STRUCTURE 194 /* RO */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
+#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
+#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
+#define EXT_CSD_TRIM_MULT 232 /* RO */
/*
* EXT_CSD field definitions
@@ -268,11 +277,23 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
-#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */
+#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
+ /* DDR mode @1.8V or 3V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
+ /* DDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
+
+#define EXT_CSD_SEC_ER_EN BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN BIT(4)
/*
* MMC_SWITCH access modes
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index f310062..3fd85e0 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -21,8 +21,13 @@
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
+ /* class 5 */
+#define SD_ERASE_WR_BLK_START 32 /* ac [31:0] data addr R1 */
+#define SD_ERASE_WR_BLK_END 33 /* ac [31:0] data addr R1 */
+
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SD_APP_SD_STATUS 13 /* adtc R1 */
#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
diff --git a/include/linux/mmc/sdhci-pltfm.h b/include/linux/mmc/sdhci-pltfm.h
new file mode 100644
index 0000000..548d59d
--- /dev/null
+++ b/include/linux/mmc/sdhci-pltfm.h
@@ -0,0 +1,35 @@
+/*
+ * Platform data declarations for the sdhci-pltfm driver.
+ *
+ * Copyright (c) 2010 MontaVista Software, LLC.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _SDHCI_PLTFM_H
+#define _SDHCI_PLTFM_H
+
+struct sdhci_ops;
+struct sdhci_host;
+
+/**
+ * struct sdhci_pltfm_data - SDHCI platform-specific information & hooks
+ * @ops: optional pointer to the platform-provided SDHCI ops
+ * @quirks: optional SDHCI quirks
+ * @init: optional hook that is called during device probe, before the
+ * driver tries to access any SDHCI registers
+ * @exit: optional hook that is called during device removal
+ */
+struct sdhci_pltfm_data {
+ struct sdhci_ops *ops;
+ unsigned int quirks;
+ int (*init)(struct sdhci_host *host, struct sdhci_pltfm_data *pdata);
+ void (*exit)(struct sdhci_host *host);
+};
+
+#endif /* _SDHCI_PLTFM_H */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
new file mode 100644
index 0000000..1fdc673
--- /dev/null
+++ b/include/linux/mmc/sdhci.h
@@ -0,0 +1,144 @@
+/*
+ * linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
+ *
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef __SDHCI_H
+#define __SDHCI_H
+
+#include <linux/scatterlist.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+struct sdhci_host {
+ /* Data set by hardware interface driver */
+ const char *hw_name; /* Hardware bus name */
+
+ unsigned int quirks; /* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA (1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
+/* Controller reports inverted write-protect state */
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+/* Controller has nonstandard clock management */
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
+/* Controller does not like fast PIO transfers */
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
+/* Controller losing signal/interrupt enable states after reset */
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
+/* Controller has to be forced to use block size of 2048 bytes */
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
+/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
+#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
+
+ int irq; /* Device IRQ */
+ void __iomem *ioaddr; /* Mapped address */
+
+ const struct sdhci_ops *ops; /* Low level hw interface */
+
+ struct regulator *vmmc; /* Power regulator */
+
+ /* Internal data */
+ struct mmc_host *mmc; /* MMC structure */
+ u64 dma_mask; /* custom DMA mask */
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+ struct led_classdev led; /* LED control */
+ char led_name[32];
+#endif
+
+ spinlock_t lock; /* Mutex */
+
+ int flags; /* Host attributes */
+#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
+#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
+
+ unsigned int version; /* SDHCI spec. version */
+
+ unsigned int max_clk; /* Max possible freq (MHz) */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+
+ unsigned int clock; /* Current clock (MHz) */
+ u8 pwr; /* Current voltage */
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ unsigned int data_early:1; /* Data finished before cmd */
+
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ unsigned int blocks; /* remaining PIO blocks */
+
+ int sg_count; /* Mapped sg entries */
+
+ u8 *adma_desc; /* ADMA descriptor table */
+ u8 *align_buffer; /* Bounce buffer */
+
+ dma_addr_t adma_addr; /* Mapped ADMA descr. table */
+ dma_addr_t align_addr; /* Mapped bounce buffer */
+
+ struct tasklet_struct card_tasklet; /* Tasklet structures */
+ struct tasklet_struct finish_tasklet;
+
+ struct timer_list timer; /* Timer for timeouts */
+
+ unsigned int caps; /* Alternative capabilities */
+
+ unsigned long private[0] ____cacheline_aligned;
+};
+#endif /* __SDHCI_H */
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 329a8fa..245cdac 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -38,6 +38,8 @@
* [8:0] Byte/block count
*/
+#define R4_MEMORY_PRESENT (1 << 27)
+
/*
SDIO status in R5
Type
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 33b2ea0..a36ab3b 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -18,6 +18,7 @@
#define SDIO_CLASS_PHS 0x06 /* PHS standard interface */
#define SDIO_CLASS_WLAN 0x07 /* WLAN interface */
#define SDIO_CLASS_ATA 0x08 /* Embedded SDIO-ATA std interface */
+#define SDIO_CLASS_BT_AMP 0x09 /* Type-A Bluetooth AMP interface */
/*
* Vendors and devices. Sort key: vendor first, device next.
OpenPOWER on IntegriCloud