diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/ab3100.h | 103 | ||||
| -rw-r--r-- | include/linux/mfd/asic3.h | 236 | ||||
| -rw-r--r-- | include/linux/mfd/ezx-pcap.h | 256 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 2 |
4 files changed, 375 insertions, 222 deletions
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h new file mode 100644 index 0000000..7a3f316 --- /dev/null +++ b/include/linux/mfd/ab3100.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * AB3100 core access functions + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/device.h> + +#ifndef MFD_AB3100_H +#define MFD_AB3100_H + +#define ABUNKNOWN 0 +#define AB3000 1 +#define AB3100 2 + +/* + * AB3100, EVENTA1, A2 and A3 event register flags + * these are catenated into a single 32-bit flag in the code + * for event notification broadcasts. + */ +#define AB3100_EVENTA1_ONSWA (0x01<<16) +#define AB3100_EVENTA1_ONSWB (0x02<<16) +#define AB3100_EVENTA1_ONSWC (0x04<<16) +#define AB3100_EVENTA1_DCIO (0x08<<16) +#define AB3100_EVENTA1_OVER_TEMP (0x10<<16) +#define AB3100_EVENTA1_SIM_OFF (0x20<<16) +#define AB3100_EVENTA1_VBUS (0x40<<16) +#define AB3100_EVENTA1_VSET_USB (0x80<<16) + +#define AB3100_EVENTA2_READY_TX (0x01<<8) +#define AB3100_EVENTA2_READY_RX (0x02<<8) +#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8) +#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8) +#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8) +#define AB3100_EVENTA2_MIDR (0x20<<8) +#define AB3100_EVENTA2_BATTERY_REM (0x40<<8) +#define AB3100_EVENTA2_ALARM (0x80<<8) + +#define AB3100_EVENTA3_ADC_TRIG5 (0x01) +#define AB3100_EVENTA3_ADC_TRIG4 (0x02) +#define AB3100_EVENTA3_ADC_TRIG3 (0x04) +#define AB3100_EVENTA3_ADC_TRIG2 (0x08) +#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10) +#define AB3100_EVENTA3_ADC_TRIGVTX (0x20) +#define AB3100_EVENTA3_ADC_TRIG1 (0x40) +#define AB3100_EVENTA3_ADC_TRIG0 (0x80) + +/* AB3100, STR register flags */ +#define AB3100_STR_ONSWA (0x01) +#define AB3100_STR_ONSWB (0x02) +#define AB3100_STR_ONSWC (0x04) +#define AB3100_STR_DCIO (0x08) +#define AB3100_STR_BOOT_MODE (0x10) +#define AB3100_STR_SIM_OFF (0x20) +#define AB3100_STR_BATT_REMOVAL (0x40) +#define AB3100_STR_VBUS (0x80) + +/** + * struct ab3100 + * @access_mutex: lock out concurrent accesses to the AB3100 registers + * @dev: pointer to the containing device + * @i2c_client: I2C client for this chip + * @testreg_client: secondary client for test registers + * @chip_name: name of this chip variant + * @chip_id: 8 bit chip ID for this chip variant + * @work: an event handling worker + * @event_subscribers: event subscribers are listed here + * @startup_events: a copy of the first reading of the event registers + * @startup_events_read: whether the first events have been read + * + * This struct is PRIVATE and devices using it should NOT + * access ANY fields. It is used as a token for calling the + * AB3100 functions. + */ +struct ab3100 { + struct mutex access_mutex; + struct device *dev; + struct i2c_client *i2c_client; + struct i2c_client *testreg_client; + char chip_name[32]; + u8 chip_id; + struct work_struct work; + struct blocking_notifier_head event_subscribers; + u32 startup_events; + bool startup_events_read; +}; + +int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval); +int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval); +int ab3100_get_register_page(struct ab3100 *ab3100, + u8 first_reg, u8 *regvals, u8 numregs); +int ab3100_mask_and_set_register(struct ab3100 *ab3100, + u8 reg, u8 andmask, u8 ormask); +u8 ab3100_get_chip_type(struct ab3100 *ab3100); +int ab3100_event_register(struct ab3100 *ab3100, + struct notifier_block *nb); +int ab3100_event_unregister(struct ab3100 *ab3100, + struct notifier_block *nb); +int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100, + u32 *fatevent); + +#endif diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h index 322cd6d..de3c4ad 100644 --- a/include/linux/mfd/asic3.h +++ b/include/linux/mfd/asic3.h @@ -30,6 +30,13 @@ struct asic3_platform_data { #define ASIC3_NUM_GPIOS 64 #define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6 +#define ASIC3_IRQ_LED0 64 +#define ASIC3_IRQ_LED1 65 +#define ASIC3_IRQ_LED2 66 +#define ASIC3_IRQ_SPI 67 +#define ASIC3_IRQ_SMBUS 68 +#define ASIC3_IRQ_OWM 69 + #define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio)) #define ASIC3_GPIO_BANK_A 0 @@ -227,8 +234,8 @@ struct asic3_platform_data { /* Basic control of the SD ASIC */ -#define ASIC3_SDHWCTRL_Base 0x0E00 -#define ASIC3_SDHWCTRL_SDConf 0x00 +#define ASIC3_SDHWCTRL_BASE 0x0E00 +#define ASIC3_SDHWCTRL_SDCONF 0x00 #define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ #define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ @@ -242,10 +249,10 @@ struct asic3_platform_data { /* SD card power supply ctrl 1=enable */ #define ASIC3_SDHWCTRL_SDPWR (1 << 6) -#define ASIC3_EXTCF_Base 0x1100 +#define ASIC3_EXTCF_BASE 0x1100 -#define ASIC3_EXTCF_Select 0x00 -#define ASIC3_EXTCF_Reset 0x04 +#define ASIC3_EXTCF_SELECT 0x00 +#define ASIC3_EXTCF_RESET 0x04 #define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ #define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ @@ -279,222 +286,9 @@ struct asic3_platform_data { * SDIO_CTRL Control registers for SDIO operations * *****************************************************************************/ -#define ASIC3_SD_CONFIG_Base 0x0400 /* Assumes 32 bit addressing */ - -#define ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */ - -/* [0:8] SD Control Register Base Address */ -#define ASIC3_SD_CONFIG_Addr0 0x20 - -/* [9:31] SD Control Register Base Address */ -#define ASIC3_SD_CONFIG_Addr1 0x24 - -/* R/O: interrupt assigned to pin */ -#define ASIC3_SD_CONFIG_IntPin 0x78 - -/* - * Set to 0x1f to clock SD controller, 0 otherwise. - * At 0x82 - Gated Clock Ctrl - */ -#define ASIC3_SD_CONFIG_ClkStop 0x80 - -/* Control clock of SD controller */ -#define ASIC3_SD_CONFIG_ClockMode 0x84 -#define ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: SD pins status */ -#define ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual pwr ctrl */ - -/* auto power up after card inserted */ -#define ASIC3_SD_CONFIG_SDHC_Power2 0x92 - -/* auto power down when card removed */ -#define ASIC3_SD_CONFIG_SDHC_Power3 0x94 -#define ASIC3_SD_CONFIG_SDHC_CardDetect 0x98 -#define ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: support slot number */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Not used */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Not used*/ - -/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */ -#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8 -#define ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */ - -/* Bit 1: double buffer/single buffer */ -#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0 - -/* Memory access enable (set to 1 to access SD Controller) */ -#define SD_CONFIG_COMMAND_MAE (1<<1) - -#define SD_CONFIG_CLK_ENABLE_ALL 0x1f - -#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */ -#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */ - - /* two bits - number of cycles for card detection */ -#define SD_CONFIG_CARDDETECTMODE_CLK ((x) & 0x3) - - -#define ASIC3_SD_CTRL_Base 0x1000 - -#define ASIC3_SD_CTRL_Cmd 0x00 -#define ASIC3_SD_CTRL_Arg0 0x08 -#define ASIC3_SD_CTRL_Arg1 0x0C -#define ASIC3_SD_CTRL_StopInternal 0x10 -#define ASIC3_SD_CTRL_TransferSectorCount 0x14 -#define ASIC3_SD_CTRL_Response0 0x18 -#define ASIC3_SD_CTRL_Response1 0x1C -#define ASIC3_SD_CTRL_Response2 0x20 -#define ASIC3_SD_CTRL_Response3 0x24 -#define ASIC3_SD_CTRL_Response4 0x28 -#define ASIC3_SD_CTRL_Response5 0x2C -#define ASIC3_SD_CTRL_Response6 0x30 -#define ASIC3_SD_CTRL_Response7 0x34 -#define ASIC3_SD_CTRL_CardStatus 0x38 -#define ASIC3_SD_CTRL_BufferCtrl 0x3C -#define ASIC3_SD_CTRL_IntMaskCard 0x40 -#define ASIC3_SD_CTRL_IntMaskBuffer 0x44 -#define ASIC3_SD_CTRL_CardClockCtrl 0x48 -#define ASIC3_SD_CTRL_MemCardXferDataLen 0x4C -#define ASIC3_SD_CTRL_MemCardOptionSetup 0x50 -#define ASIC3_SD_CTRL_ErrorStatus0 0x58 -#define ASIC3_SD_CTRL_ErrorStatus1 0x5C -#define ASIC3_SD_CTRL_DataPort 0x60 -#define ASIC3_SD_CTRL_TransactionCtrl 0x68 -#define ASIC3_SD_CTRL_SoftwareReset 0x1C0 - -#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0) - -#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8) - -#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15) -#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0) -#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0) - -#define MEM_CARD_OPTION_REQUIRED 0x000e -#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x) & 0x0f) << 4) -#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14) -#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15) -#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 0 - -#define SD_CTRL_COMMAND_INDEX(x) ((x) & 0x3f) -#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6) -#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6) -#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8) -#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8) -#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11) -#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12) -#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12) -#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13) -#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14) - -#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0) -#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8) - -#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0) -#define SD_CTRL_CARDSTATUS_RW_END (1 << 2) -#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3) -#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4) -#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5) -#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) -#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8) -#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9) -#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10) - -#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0) -#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1) -#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2) -#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3) -#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4) -#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5) -#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6) -#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7) -#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8) -#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9) -#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13) -#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14) -#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15) - -#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0) -#define SD_CTRL_INTMASKCARD_RW_END (1 << 2) -#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3) -#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4) -#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5) -#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6) -#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7) -#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8) -#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9) -#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10) - -#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0) -#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1) -#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2) -#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3) -#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4) -#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5) -#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6) -#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7) -#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8) -#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9) -#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13) -#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14) -#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15) - -#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4) -#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10) -#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11) - -#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0) -#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4) -#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5) -#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6) - -#define ASIC3_SDIO_CTRL_Base 0x1200 - -#define ASIC3_SDIO_CTRL_Cmd 0x00 -#define ASIC3_SDIO_CTRL_CardPortSel 0x04 -#define ASIC3_SDIO_CTRL_Arg0 0x08 -#define ASIC3_SDIO_CTRL_Arg1 0x0C -#define ASIC3_SDIO_CTRL_TransferBlockCount 0x14 -#define ASIC3_SDIO_CTRL_Response0 0x18 -#define ASIC3_SDIO_CTRL_Response1 0x1C -#define ASIC3_SDIO_CTRL_Response2 0x20 -#define ASIC3_SDIO_CTRL_Response3 0x24 -#define ASIC3_SDIO_CTRL_Response4 0x28 -#define ASIC3_SDIO_CTRL_Response5 0x2C -#define ASIC3_SDIO_CTRL_Response6 0x30 -#define ASIC3_SDIO_CTRL_Response7 0x34 -#define ASIC3_SDIO_CTRL_CardStatus 0x38 -#define ASIC3_SDIO_CTRL_BufferCtrl 0x3C -#define ASIC3_SDIO_CTRL_IntMaskCard 0x40 -#define ASIC3_SDIO_CTRL_IntMaskBuffer 0x44 -#define ASIC3_SDIO_CTRL_CardXferDataLen 0x4C -#define ASIC3_SDIO_CTRL_CardOptionSetup 0x50 -#define ASIC3_SDIO_CTRL_ErrorStatus0 0x54 -#define ASIC3_SDIO_CTRL_ErrorStatus1 0x58 -#define ASIC3_SDIO_CTRL_DataPort 0x60 -#define ASIC3_SDIO_CTRL_TransactionCtrl 0x68 -#define ASIC3_SDIO_CTRL_CardIntCtrl 0x6C -#define ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70 -#define ASIC3_SDIO_CTRL_HostInformation 0x74 -#define ASIC3_SDIO_CTRL_ErrorCtrl 0x78 -#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C -#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0 +#define ASIC3_SD_CONFIG_BASE 0x0400 /* Assumes 32 bit addressing */ +#define ASIC3_SD_CTRL_BASE 0x1000 +#define ASIC3_SDIO_CTRL_BASE 0x1200 #define ASIC3_MAP_SIZE_32BIT 0x2000 #define ASIC3_MAP_SIZE_16BIT 0x1000 diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h new file mode 100644 index 0000000..c12c3c0 --- /dev/null +++ b/include/linux/mfd/ezx-pcap.h @@ -0,0 +1,256 @@ +/* + * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com> + * + * For further information, please see http://wiki.openezx.org/PCAP2 + */ + +#ifndef EZX_PCAP_H +#define EZX_PCAP_H + +struct pcap_subdev { + int id; + const char *name; + void *platform_data; +}; + +struct pcap_platform_data { + unsigned int irq_base; + unsigned int config; + void (*init) (void *); /* board specific init */ + int num_subdevs; + struct pcap_subdev *subdevs; +}; + +struct pcap_chip; + +int ezx_pcap_write(struct pcap_chip *, u8, u32); +int ezx_pcap_read(struct pcap_chip *, u8, u32 *); +int pcap_to_irq(struct pcap_chip *, int); +int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); +int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); + +#define PCAP_SECOND_PORT 1 +#define PCAP_CS_AH 2 + +#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000 +#define PCAP_REGISTER_READ_OP_BIT 0x00000000 + +#define PCAP_REGISTER_VALUE_MASK 0x01ffffff +#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000 +#define PCAP_REGISTER_ADDRESS_SHIFT 26 +#define PCAP_REGISTER_NUMBER 32 +#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff +#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff + +/* registers acessible by both pcap ports */ +#define PCAP_REG_ISR 0x0 /* Interrupt Status */ +#define PCAP_REG_MSR 0x1 /* Interrupt Mask */ +#define PCAP_REG_PSTAT 0x2 /* Processor Status */ +#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */ +#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */ +#define PCAP_REG_BATT 0x8 /* Battery Control */ +#define PCAP_REG_ADC 0x9 /* AD Control */ +#define PCAP_REG_ADR 0xa /* AD Result */ +#define PCAP_REG_CODEC 0xb /* Audio Codec Control */ +#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */ +#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */ +#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */ +#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */ +#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */ +#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */ +#define PCAP_REG_GP 0x1b /* General Purpose */ +#define PCAP_REG_TEST1 0x1c +#define PCAP_REG_TEST2 0x1d +#define PCAP_REG_VENDOR_TEST1 0x1e +#define PCAP_REG_VENDOR_TEST2 0x1f + +/* registers acessible by pcap port 1 only (a1200, e2 & e6) */ +#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */ +#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */ +#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */ +#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */ +#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */ +#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */ +#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */ +#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */ +#define PCAP_REG_PWR 0x13 /* Power Control */ +#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */ +#define PCAP_REG_VENDOR_REV 0x17 +#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */ + +/* PCAP2 Interrupts */ +#define PCAP_NIRQS 23 +#define PCAP_IRQ_ADCDONE 0 /* ADC done port 1 */ +#define PCAP_IRQ_TS 1 /* Touch Screen */ +#define PCAP_IRQ_1HZ 2 /* 1HZ timer */ +#define PCAP_IRQ_WH 3 /* ADC above high limit */ +#define PCAP_IRQ_WL 4 /* ADC below low limit */ +#define PCAP_IRQ_TODA 5 /* Time of day alarm */ +#define PCAP_IRQ_USB4V 6 /* USB above 4V */ +#define PCAP_IRQ_ONOFF 7 /* On/Off button */ +#define PCAP_IRQ_ONOFF2 8 /* On/Off button 2 */ +#define PCAP_IRQ_USB1V 9 /* USB above 1V */ +#define PCAP_IRQ_MOBPORT 10 +#define PCAP_IRQ_MIC 11 /* Mic attach/HS button */ +#define PCAP_IRQ_HS 12 /* Headset attach */ +#define PCAP_IRQ_ST 13 +#define PCAP_IRQ_PC 14 /* Power Cut */ +#define PCAP_IRQ_WARM 15 +#define PCAP_IRQ_EOL 16 /* Battery End Of Life */ +#define PCAP_IRQ_CLK 17 +#define PCAP_IRQ_SYSRST 18 /* System Reset */ +#define PCAP_IRQ_DUMMY 19 +#define PCAP_IRQ_ADCDONE2 20 /* ADC done port 2 */ +#define PCAP_IRQ_SOFTRESET 21 +#define PCAP_IRQ_MNEXB 22 + +/* voltage regulators */ +#define V1 0 +#define V2 1 +#define V3 2 +#define V4 3 +#define V5 4 +#define V6 5 +#define V7 6 +#define V8 7 +#define V9 8 +#define V10 9 +#define VAUX1 10 +#define VAUX2 11 +#define VAUX3 12 +#define VAUX4 13 +#define VSIM 14 +#define VSIM2 15 +#define VVIB 16 +#define SW1 17 +#define SW2 18 +#define SW3 19 +#define SW1S 20 +#define SW2S 21 + +#define PCAP_BATT_DAC_MASK 0x000000ff +#define PCAP_BATT_DAC_SHIFT 0 +#define PCAP_BATT_B_FDBK (1 << 8) +#define PCAP_BATT_EXT_ISENSE (1 << 9) +#define PCAP_BATT_V_COIN_MASK 0x00003c00 +#define PCAP_BATT_V_COIN_SHIFT 10 +#define PCAP_BATT_I_COIN (1 << 14) +#define PCAP_BATT_COIN_CH_EN (1 << 15) +#define PCAP_BATT_EOL_SEL_MASK 0x000e0000 +#define PCAP_BATT_EOL_SEL_SHIFT 17 +#define PCAP_BATT_EOL_CMP_EN (1 << 20) +#define PCAP_BATT_BATT_DET_EN (1 << 21) +#define PCAP_BATT_THERMBIAS_CTRL (1 << 22) + +#define PCAP_ADC_ADEN (1 << 0) +#define PCAP_ADC_RAND (1 << 1) +#define PCAP_ADC_AD_SEL1 (1 << 2) +#define PCAP_ADC_AD_SEL2 (1 << 3) +#define PCAP_ADC_ADA1_MASK 0x00000070 +#define PCAP_ADC_ADA1_SHIFT 4 +#define PCAP_ADC_ADA2_MASK 0x00000380 +#define PCAP_ADC_ADA2_SHIFT 7 +#define PCAP_ADC_ATO_MASK 0x00003c00 +#define PCAP_ADC_ATO_SHIFT 10 +#define PCAP_ADC_ATOX (1 << 14) +#define PCAP_ADC_MTR1 (1 << 15) +#define PCAP_ADC_MTR2 (1 << 16) +#define PCAP_ADC_TS_M_MASK 0x000e0000 +#define PCAP_ADC_TS_M_SHIFT 17 +#define PCAP_ADC_TS_REF_LOWPWR (1 << 20) +#define PCAP_ADC_TS_REFENB (1 << 21) +#define PCAP_ADC_BATT_I_POLARITY (1 << 22) +#define PCAP_ADC_BATT_I_ADC (1 << 23) + +#define PCAP_ADC_BANK_0 0 +#define PCAP_ADC_BANK_1 1 +/* ADC bank 0 */ +#define PCAP_ADC_CH_COIN 0 +#define PCAP_ADC_CH_BATT 1 +#define PCAP_ADC_CH_BPLUS 2 +#define PCAP_ADC_CH_MOBPORTB 3 +#define PCAP_ADC_CH_TEMPERATURE 4 +#define PCAP_ADC_CH_CHARGER_ID 5 +#define PCAP_ADC_CH_AD6 6 +/* ADC bank 1 */ +#define PCAP_ADC_CH_AD7 0 +#define PCAP_ADC_CH_AD8 1 +#define PCAP_ADC_CH_AD9 2 +#define PCAP_ADC_CH_TS_X1 3 +#define PCAP_ADC_CH_TS_X2 4 +#define PCAP_ADC_CH_TS_Y1 5 +#define PCAP_ADC_CH_TS_Y2 6 + +#define PCAP_ADC_T_NOW 0 +#define PCAP_ADC_T_IN_BURST 1 +#define PCAP_ADC_T_OUT_BURST 2 + +#define PCAP_ADC_ATO_IN_BURST 6 +#define PCAP_ADC_ATO_OUT_BURST 0 + +#define PCAP_ADC_TS_M_XY 1 +#define PCAP_ADC_TS_M_PRESSURE 2 +#define PCAP_ADC_TS_M_PLATE_X 3 +#define PCAP_ADC_TS_M_PLATE_Y 4 +#define PCAP_ADC_TS_M_STANDBY 5 +#define PCAP_ADC_TS_M_NONTS 6 + +#define PCAP_ADR_ADD1_MASK 0x000003ff +#define PCAP_ADR_ADD1_SHIFT 0 +#define PCAP_ADR_ADD2_MASK 0x000ffc00 +#define PCAP_ADR_ADD2_SHIFT 10 +#define PCAP_ADR_ADINC1 (1 << 20) +#define PCAP_ADR_ADINC2 (1 << 21) +#define PCAP_ADR_ASC (1 << 22) +#define PCAP_ADR_ONESHOT (1 << 23) + +#define PCAP_BUSCTRL_FSENB (1 << 0) +#define PCAP_BUSCTRL_USB_SUSPEND (1 << 1) +#define PCAP_BUSCTRL_USB_PU (1 << 2) +#define PCAP_BUSCTRL_USB_PD (1 << 3) +#define PCAP_BUSCTRL_VUSB_EN (1 << 4) +#define PCAP_BUSCTRL_USB_PS (1 << 5) +#define PCAP_BUSCTRL_VUSB_MSTR_EN (1 << 6) +#define PCAP_BUSCTRL_VBUS_PD_ENB (1 << 7) +#define PCAP_BUSCTRL_CURRLIM (1 << 8) +#define PCAP_BUSCTRL_RS232ENB (1 << 9) +#define PCAP_BUSCTRL_RS232_DIR (1 << 10) +#define PCAP_BUSCTRL_SE0_CONN (1 << 11) +#define PCAP_BUSCTRL_USB_PDM (1 << 12) +#define PCAP_BUSCTRL_BUS_PRI_ADJ (1 << 24) + +/* leds */ +#define PCAP_LED0 0 +#define PCAP_LED1 1 +#define PCAP_BL0 2 +#define PCAP_BL1 3 +#define PCAP_VIB 4 +#define PCAP_LED_3MA 0 +#define PCAP_LED_4MA 1 +#define PCAP_LED_5MA 2 +#define PCAP_LED_9MA 3 +#define PCAP_LED_GPIO_VAL_MASK 0x00ffffff +#define PCAP_LED_GPIO_EN 0x01000000 +#define PCAP_LED_GPIO_INVERT 0x02000000 +#define PCAP_LED_T_MASK 0xf +#define PCAP_LED_C_MASK 0x3 +#define PCAP_BL_MASK 0x1f +#define PCAP_BL0_SHIFT 0 +#define PCAP_LED0_EN (1 << 5) +#define PCAP_LED1_EN (1 << 6) +#define PCAP_LED0_T_SHIFT 7 +#define PCAP_LED1_T_SHIFT 11 +#define PCAP_LED0_C_SHIFT 15 +#define PCAP_LED1_C_SHIFT 17 +#define PCAP_BL1_SHIFT 20 +#define PCAP_VIB_MASK 0x3 +#define PCAP_VIB_SHIFT 20 +#define PCAP_VIB_EN (1 << 19) + +/* RTC */ +#define PCAP_RTC_DAY_MASK 0x3fff +#define PCAP_RTC_TOD_MASK 0xffff +#define PCAP_RTC_PC_MASK 0x7 +#define SEC_PER_DAY 86400 + +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index c377118..6b9c5d0 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -22,7 +22,7 @@ * data for the MMC controller */ struct tmio_mmc_data { - unsigned int hclk; + const unsigned int hclk; }; /* |
