diff options
Diffstat (limited to 'include/linux/mfd/ti_ssp.h')
| -rw-r--r-- | include/linux/mfd/ti_ssp.h | 93 |
1 files changed, 0 insertions, 93 deletions
diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h deleted file mode 100644 index dbb4b43..0000000 --- a/include/linux/mfd/ti_ssp.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs - * - * Copyright (C) 2010 Texas Instruments Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __TI_SSP_H__ -#define __TI_SSP_H__ - -struct ti_ssp_dev_data { - const char *dev_name; - void *pdata; - size_t pdata_size; -}; - -struct ti_ssp_data { - unsigned long out_clock; - struct ti_ssp_dev_data dev_data[2]; -}; - -struct ti_ssp_spi_data { - unsigned long iosel; - int num_cs; - void (*select)(int cs); -}; - -/* - * Sequencer port IO pin configuration bits. These do not correlate 1-1 with - * the hardware. The iosel field in the port data combines iosel1 and iosel2, - * and is therefore not a direct map to register space. It is best to use the - * macros below to construct iosel values. - * - * least significant 16 bits --> iosel1 - * most significant 16 bits --> iosel2 - */ - -#define SSP_IN 0x0000 -#define SSP_DATA 0x0001 -#define SSP_CLOCK 0x0002 -#define SSP_CHIPSEL 0x0003 -#define SSP_OUT 0x0004 -#define SSP_PIN_SEL(pin, v) ((v) << ((pin) * 3)) -#define SSP_PIN_MASK(pin) SSP_PIN_SEL(pin, 0x7) -#define SSP_INPUT_SEL(pin) ((pin) << 16) - -/* Sequencer port config bits */ -#define SSP_EARLY_DIN BIT(8) -#define SSP_DELAY_DOUT BIT(9) - -/* Sequence map definitions */ -#define SSP_CLK_HIGH BIT(0) -#define SSP_CLK_LOW 0 -#define SSP_DATA_HIGH BIT(1) -#define SSP_DATA_LOW 0 -#define SSP_CS_HIGH BIT(2) -#define SSP_CS_LOW 0 -#define SSP_OUT_MODE BIT(3) -#define SSP_IN_MODE 0 -#define SSP_DATA_REG BIT(4) -#define SSP_ADDR_REG 0 - -#define SSP_OPCODE_DIRECT ((0x0) << 5) -#define SSP_OPCODE_TOGGLE ((0x1) << 5) -#define SSP_OPCODE_SHIFT ((0x2) << 5) -#define SSP_OPCODE_BRANCH0 ((0x4) << 5) -#define SSP_OPCODE_BRANCH1 ((0x5) << 5) -#define SSP_OPCODE_BRANCH ((0x6) << 5) -#define SSP_OPCODE_STOP ((0x7) << 5) -#define SSP_BRANCH(addr) ((addr) << 8) -#define SSP_COUNT(cycles) ((cycles) << 8) - -int ti_ssp_raw_read(struct device *dev); -int ti_ssp_raw_write(struct device *dev, u32 val); -int ti_ssp_load(struct device *dev, int offs, u32* prog, int len); -int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output); -int ti_ssp_set_mode(struct device *dev, int mode); -int ti_ssp_set_iosel(struct device *dev, u32 iosel); - -#endif /* __TI_SSP_H__ */ |
