summaryrefslogtreecommitdiffstats
path: root/include/linux/ixjuser.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/ixjuser.h')
-rw-r--r--include/linux/ixjuser.h720
1 files changed, 0 insertions, 720 deletions
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
deleted file mode 100644
index 94ab5e9..0000000
--- a/include/linux/ixjuser.h
+++ /dev/null
@@ -1,720 +0,0 @@
-#ifndef __LINUX_IXJUSER_H
-#define __LINUX_IXJUSER_H
-
-/******************************************************************************
- *
- * ixjuser.h
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- * (c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Author: Ed Okerson, <eokerson@quicknet.net>
- *
- * Contributors: Greg Herlein, <gherlein@quicknet.net>
- * David W. Erhart, <derhart@quicknet.net>
- * John Sellers, <jsellers@quicknet.net>
- * Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website: http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#include <linux/telephony.h>
-
-
-/******************************************************************************
-*
-* IOCTL's used for the Quicknet Telephony Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before further use.
-*
-******************************************************************************/
-
-#define IXJCTL_DSP_RESET _IO ('q', 0xC0)
-
-#define IXJCTL_RING PHONE_RING
-#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE
-#define IXJCTL_MAXRINGS PHONE_MAXRINGS
-#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE
-#define IXJCTL_RING_START PHONE_RING_START
-#define IXJCTL_RING_STOP PHONE_RING_STOP
-
-#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int)
-#define IXJCTL_SERIAL _IOR ('q', 0xC2, int)
-#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int)
-#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int)
-#define IXJCTL_VERSION _IOR ('q', 0xDA, char *)
-#define IXJCTL_DSP_IDLE _IO ('q', 0xC5)
-#define IXJCTL_TESTRAM _IO ('q', 0xC6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss. The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur. The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC PHONE_REC_CODEC
-#define IXJCTL_REC_START PHONE_REC_START
-#define IXJCTL_REC_STOP PHONE_REC_STOP
-#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH
-#define IXJCTL_FRAME PHONE_FRAME
-#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME
-#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL
-
-typedef enum {
- f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
- f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
- f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
- f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
- f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
- f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
- f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
- f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
- lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-} IXJ_FILTER_FREQ;
-
-typedef struct {
- unsigned int filter;
- IXJ_FILTER_FREQ freq;
- char enable;
-} IXJ_FILTER;
-
-typedef struct {
- char enable;
- char en_filter;
- unsigned int filter;
- unsigned int on1;
- unsigned int off1;
- unsigned int on2;
- unsigned int off2;
- unsigned int on3;
- unsigned int off3;
-} IXJ_FILTER_CADENCE;
-
-#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *)
-#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *)
-#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int)
-#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
-#define IXJCTL_PLAY_CID _IO ('q', 0xD7)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table. The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-* Dial Tone - 25
-* Ring Back - 26
-* Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum {
- hz20 = 0x7ffa,
- hz50 = 0x7fe5,
- hz133 = 0x7f4c,
- hz200 = 0x7e6b,
- hz261 = 0x7d50, /* .63 C1 */
- hz277 = 0x7cfa, /* .18 CS1 */
- hz293 = 0x7c9f, /* .66 D1 */
- hz300 = 0x7c75,
- hz311 = 0x7c32, /* .13 DS1 */
- hz329 = 0x7bbf, /* .63 E1 */
- hz330 = 0x7bb8,
- hz340 = 0x7b75,
- hz349 = 0x7b37, /* .23 F1 */
- hz350 = 0x7b30,
- hz360 = 0x7ae9,
- hz369 = 0x7aa8, /* .99 FS1 */
- hz380 = 0x7a56,
- hz392 = 0x79fa, /* .00 G1 */
- hz400 = 0x79bb,
- hz415 = 0x7941, /* .30 GS1 */
- hz420 = 0x7918,
- hz425 = 0x78ee,
- hz435 = 0x7899,
- hz440 = 0x786d, /* .00 A1 */
- hz445 = 0x7842,
- hz450 = 0x7815,
- hz452 = 0x7803,
- hz466 = 0x7784, /* .16 AS1 */
- hz475 = 0x7731,
- hz480 = 0x7701,
- hz493 = 0x7685, /* .88 B1 */
- hz494 = 0x767b,
- hz500 = 0x7640,
- hz520 = 0x7578,
- hz523 = 0x7559, /* .25 C2 */
- hz525 = 0x7544,
- hz540 = 0x74a7,
- hz554 = 0x7411, /* .37 CS2 */
- hz587 = 0x72a1, /* .33 D2 */
- hz590 = 0x727f,
- hz600 = 0x720b,
- hz620 = 0x711e,
- hz622 = 0x7106, /* .25 DS2 */
- hz659 = 0x6f3b, /* .26 E2 */
- hz660 = 0x6f2e,
- hz698 = 0x6d3d, /* .46 F2 */
- hz700 = 0x6d22,
- hz739 = 0x6b09, /* .99 FS2 */
- hz740 = 0x6afa,
- hz750 = 0x6a6c,
- hz770 = 0x694b,
- hz783 = 0x688b, /* .99 G2 */
- hz800 = 0x678d,
- hz816 = 0x6698,
- hz830 = 0x65bf, /* .61 GS2 */
- hz850 = 0x6484,
- hz857 = 0x6414,
- hz880 = 0x629f, /* .00 A2 */
- hz900 = 0x6154,
- hz932 = 0x5f35, /* .33 AS2 */
- hz935 = 0x5f01,
- hz941 = 0x5e9a,
- hz942 = 0x5e88,
- hz950 = 0x5dfd,
- hz975 = 0x5c44,
- hz1000 = 0x5a81,
- hz1020 = 0x5912,
- hz1050 = 0x56e2,
- hz1100 = 0x5320,
- hz1140 = 0x5007,
- hz1200 = 0x4b3b,
- hz1209 = 0x4a80,
- hz1215 = 0x4a02,
- hz1250 = 0x471c,
- hz1300 = 0x42e0,
- hz1330 = 0x4049,
- hz1336 = 0x3fc4,
- hz1366 = 0x3d22,
- hz1380 = 0x3be4,
- hz1400 = 0x3a1b,
- hz1450 = 0x3596,
- hz1477 = 0x331c,
- hz1500 = 0x30fb,
- hz1600 = 0x278d,
- hz1633 = 0x2462,
- hz1638 = 0x23e7,
- hz1645 = 0x233a,
- hz1750 = 0x18f8,
- hz1800 = 0x1405,
- hz1860 = 0xe0b,
- hz2100 = 0xf5f6,
- hz2130 = 0xf2f5,
- hz2450 = 0xd3b3,
- hz2750 = 0xb8e4
-} IXJ_FREQ;
-
-typedef enum {
- C1 = hz261,
- CS1 = hz277,
- D1 = hz293,
- DS1 = hz311,
- E1 = hz329,
- F1 = hz349,
- FS1 = hz369,
- G1 = hz392,
- GS1 = hz415,
- A1 = hz440,
- AS1 = hz466,
- B1 = hz493,
- C2 = hz523,
- CS2 = hz554,
- D2 = hz587,
- DS2 = hz622,
- E2 = hz659,
- F2 = hz698,
- FS2 = hz739,
- G2 = hz783,
- GS2 = hz830,
- A2 = hz880,
- AS2 = hz932,
-} IXJ_NOTE;
-
-typedef struct {
- int tone_index;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-} IXJ_TONE;
-
-#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT). This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence. The tone_on_time and tone_off time are in
-* 250 microsecond intervals. A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure. The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinitely, or to repeat the entire cadence
-* indefinitely. The ce variable is a pointer to the array of IXJ_TONE
-* structures. If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined. It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexes are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence. If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes. Only one
-* cadence can be played at a time. It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct {
- int index;
- int tone_on_time;
- int tone_off_time;
- int freq0;
- int gain0;
- int freq1;
- int gain1;
-} IXJ_CADENCE_ELEMENT;
-
-typedef enum {
- PLAY_ONCE,
- REPEAT_LAST_ELEMENT,
- REPEAT_ALL
-} IXJ_CADENCE_TERM;
-
-typedef struct {
- int elements_used;
- IXJ_CADENCE_TERM termination;
- IXJ_CADENCE_ELEMENT __user *ce;
-} IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC
-#define IXJCTL_PLAY_START PHONE_PLAY_START
-#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP
-#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH
-#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME
-#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar
-* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
-******************************************************************************/
-#define IXJCTL_AEC_START _IOW ('q', 0xCB, int)
-#define IXJCTL_AEC_STOP _IO ('q', 0xCC)
-#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD)
-
-#define AEC_OFF 0
-#define AEC_LOW 1
-#define AEC_MED 2
-#define AEC_HIGH 3
-#define AEC_AUTO 4
-#define AEC_AGC 5
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
-* only. If you pass a 1, DTMF is suppressed from the audio stream.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY PHONE_DTMF_READY
-#define IXJCTL_GET_DTMF PHONE_GET_DTMF
-#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII
-#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB
-#define IXJCTL_EXCEPTION PHONE_EXCEPTION
-#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE
-#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME
-#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME
-#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE
-#define IXJCTL_BUSY PHONE_BUSY
-#define IXJCTL_RINGBACK PHONE_RINGBACK
-#define IXJCTL_DIALTONE PHONE_DIALTONE
-#define IXJCTL_CPT_STOP PHONE_CPT_STOP
-
-/******************************************************************************
-* LineJACK specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJACK
-******************************************************************************/
-
-#define IXJCTL_SET_LED _IOW ('q', 0xCE, int)
-#define IXJCTL_MIXER _IOW ('q', 0xCF, int)
-
-/******************************************************************************
-*
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_MASTER_L 0x0000
-#define MIXER_MASTER_R 0x0100
-#define ATT00DB 0x00
-#define ATT02DB 0x01
-#define ATT04DB 0x02
-#define ATT06DB 0x03
-#define ATT08DB 0x04
-#define ATT10DB 0x05
-#define ATT12DB 0x06
-#define ATT14DB 0x07
-#define ATT16DB 0x08
-#define ATT18DB 0x09
-#define ATT20DB 0x0A
-#define ATT22DB 0x0B
-#define ATT24DB 0x0C
-#define ATT26DB 0x0D
-#define ATT28DB 0x0E
-#define ATT30DB 0x0F
-#define ATT32DB 0x10
-#define ATT34DB 0x11
-#define ATT36DB 0x12
-#define ATT38DB 0x13
-#define ATT40DB 0x14
-#define ATT42DB 0x15
-#define ATT44DB 0x16
-#define ATT46DB 0x17
-#define ATT48DB 0x18
-#define ATT50DB 0x19
-#define ATT52DB 0x1A
-#define ATT54DB 0x1B
-#define ATT56DB 0x1C
-#define ATT58DB 0x1D
-#define ATT60DB 0x1E
-#define ATT62DB 0x1F
-#define MASTER_MUTE 0x80
-
-/******************************************************************************
-*
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_CD_L 0x0600
-#define MIXER_PORT_CD_R 0x0700
-#define MIXER_PORT_LINE_IN_L 0x0800
-#define MIXER_PORT_LINE_IN_R 0x0900
-#define MIXER_PORT_POTS_REC 0x0C00
-#define MIXER_PORT_MIC 0x0E00
-
-#define GAIN12DB 0x00
-#define GAIN10DB 0x01
-#define GAIN08DB 0x02
-#define GAIN06DB 0x03
-#define GAIN04DB 0x04
-#define GAIN02DB 0x05
-#define GAIN00DB 0x06
-#define GAIN_02DB 0x07
-#define GAIN_04DB 0x08
-#define GAIN_06DB 0x09
-#define GAIN_08DB 0x0A
-#define GAIN_10DB 0x0B
-#define GAIN_12DB 0x0C
-#define GAIN_14DB 0x0D
-#define GAIN_16DB 0x0E
-#define GAIN_18DB 0x0F
-#define GAIN_20DB 0x10
-#define GAIN_22DB 0x11
-#define GAIN_24DB 0x12
-#define GAIN_26DB 0x13
-#define GAIN_28DB 0x14
-#define GAIN_30DB 0x15
-#define GAIN_32DB 0x16
-#define GAIN_34DB 0x17
-#define GAIN_36DB 0x18
-#define GAIN_38DB 0x19
-#define GAIN_40DB 0x1A
-#define GAIN_42DB 0x1B
-#define GAIN_44DB 0x1C
-#define GAIN_46DB 0x1D
-#define GAIN_48DB 0x1E
-#define GAIN_50DB 0x1F
-#define INPUT_MUTE 0x80
-
-/******************************************************************************
-*
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-*
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY 0x0F00
-
-#define POTS_ATT_00DB 0x00
-#define POTS_ATT_04DB 0x01
-#define POTS_ATT_08DB 0x02
-#define POTS_ATT_12DB 0x03
-#define POTS_ATT_16DB 0x04
-#define POTS_ATT_20DB 0x05
-#define POTS_ATT_24DB 0x06
-#define POTS_ATT_28DB 0x07
-#define POTS_MUTE 0x80
-
-/******************************************************************************
-*
-* The DAA controls the interface to the PSTN port. The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-*
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int)
-
-#define DAA_US 1 /*PITA 8kHz */
-#define DAA_UK 2 /*ISAR34 8kHz */
-#define DAA_FRANCE 3 /* */
-#define DAA_GERMANY 4
-#define DAA_AUSTRALIA 5
-#define DAA_JAPAN 6
-
-/******************************************************************************
-*
-* Use IXJCTL_PORT to set or query the port the card is set to. If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-*
-******************************************************************************/
-#define IXJCTL_PORT _IOW ('q', 0xD1, int)
-
-#define PORT_QUERY 0
-#define PORT_POTS 1
-#define PORT_PSTN 2
-#define PORT_SPEAKER 3
-#define PORT_HANDSET 4
-
-#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE
-#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE
-
-#define PSTN_ON_HOOK 0
-#define PSTN_RINGING 1
-#define PSTN_OFF_HOOK 2
-#define PSTN_PULSE_DIAL 3
-
-/******************************************************************************
-*
-* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR),
-* and the transmit gain (AGX). OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB.
-*
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int)
-
-#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */
-#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */
-#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */
-
-#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */
-#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */
-#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */
-#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */
-
-#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3)
-
-#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *)
-#define IXJCTL_VMWI _IOR ('q', 0xD8, int)
-#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *)
-/******************************************************************************
-*
-* The wink duration is tunable with this ioctl. The default wink duration
-* is 320ms. You do not need to use this ioctl if you do not require a
-* different wink duration.
-*
-******************************************************************************/
-#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION
-
-/******************************************************************************
-*
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-*
-******************************************************************************/
-#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-* /usr/include/asm/param.h, this determines the fundamental
-* frequency of the clock ticks on your Linux system. The kernel
-* must be rebuilt if you change this value, also all modules you
-* use (except this one) must be recompiled. The default value
-* is 100, and you only need to use this IOCTL if you use some
-* other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-* the DSP. This value cannot be larger than HZ. By
-* increasing both of these values, you may be able to reduce
-* latency because the max hang time that can exist between the
-* driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7)
-#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int)
-
-/******************************************************************************
-*
-* This ioctl allows the user application to control what events the driver
-* will send signals for, and what signals it will send for which event.
-* By default, if signaling is enabled, all events will send SIGIO when
-* they occur. To disable signals for an event set the signal to 0.
-*
-******************************************************************************/
-typedef enum {
- SIG_DTMF_READY,
- SIG_HOOKSTATE,
- SIG_FLASH,
- SIG_PSTN_RING,
- SIG_CALLER_ID,
- SIG_PSTN_WINK,
- SIG_F0, SIG_F1, SIG_F2, SIG_F3,
- SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
- SIG_READ_READY = 33,
- SIG_WRITE_READY = 34
-} IXJ_SIGEVENT;
-
-typedef struct {
- unsigned int event;
- int signal;
-} IXJ_SIGDEF;
-
-#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *)
-
-/******************************************************************************
-*
-* These ioctls allow the user application to change the gain in the
-* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause
-* return value to be the current setting. Valid values to set are 0x00 - 0x1F
-*
-* 11111 = +12 dB
-* 10111 = 0 dB
-* 00000 = -34.5 dB
-*
-* IXJCTL_SC_RXG sets the Receive gain
-* IXJCTL_SC_TXG sets the Transmit gain
-*
-******************************************************************************/
-#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int)
-#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int)
-
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function). It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes. The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int)
-
-/******************************************************************************
- *
- * new structure for accessing raw filter information
- *
- ******************************************************************************/
-
-typedef struct {
- unsigned int filter;
- char enable;
- unsigned int coeff[19];
-} IXJ_FILTER_RAW;
-
-#endif
OpenPOWER on IntegriCloud