diff options
Diffstat (limited to 'include/linux/if.h')
| -rw-r--r-- | include/linux/if.h | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/include/linux/if.h b/include/linux/if.h new file mode 100644 index 0000000..110282d --- /dev/null +++ b/include/linux/if.h @@ -0,0 +1,193 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the INET interface module. + * + * Version: @(#)if.h 1.0.2 04/18/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 + * Ross Biro, <bir7@leland.Stanford.Edu> + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IF_H +#define _LINUX_IF_H + +#include <linux/types.h> /* for "__kernel_caddr_t" et al */ +#include <linux/socket.h> /* for "struct sockaddr" et al */ +#include <linux/compiler.h> /* for "__user" et al */ + +#define IFNAMSIZ 16 +#include <linux/hdlc/ioctl.h> + +/* Standard interface flags (netdevice->flags). */ +#define IFF_UP 0x1 /* interface is up */ +#define IFF_BROADCAST 0x2 /* broadcast address valid */ +#define IFF_DEBUG 0x4 /* turn on debugging */ +#define IFF_LOOPBACK 0x8 /* is a loopback net */ +#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ +#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ +#define IFF_RUNNING 0x40 /* resources allocated */ +#define IFF_NOARP 0x80 /* no ARP protocol */ +#define IFF_PROMISC 0x100 /* receive all packets */ +#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ + +#define IFF_MASTER 0x400 /* master of a load balancer */ +#define IFF_SLAVE 0x800 /* slave of a load balancer */ + +#define IFF_MULTICAST 0x1000 /* Supports multicast */ + +#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING) + +#define IFF_PORTSEL 0x2000 /* can set media type */ +#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ +#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ + +/* Private (from user) interface flags (netdevice->priv_flags). */ +#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ +#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ + +#define IF_GET_IFACE 0x0001 /* for querying only */ +#define IF_GET_PROTO 0x0002 + +/* For definitions see hdlc.h */ +#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ +#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ +#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ +#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ +#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ +#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ +#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ + +/* For definitions see hdlc.h */ +#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ +#define IF_PROTO_PPP 0x2001 /* PPP protocol */ +#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ +#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ +#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ +#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ +#define IF_PROTO_X25 0x2006 /* X.25 */ +#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ +#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ +#define IF_PROTO_FR_ETH_PVC 0x200B +#define IF_PROTO_RAW 0x200C /* RAW Socket */ + + +/* + * Device mapping structure. I'd just gone off and designed a + * beautiful scheme using only loadable modules with arguments + * for driver options and along come the PCMCIA people 8) + * + * Ah well. The get() side of this is good for WDSETUP, and it'll + * be handy for debugging things. The set side is fine for now and + * being very small might be worth keeping for clean configuration. + */ + +struct ifmap +{ + unsigned long mem_start; + unsigned long mem_end; + unsigned short base_addr; + unsigned char irq; + unsigned char dma; + unsigned char port; + /* 3 bytes spare */ +}; + +struct if_settings +{ + unsigned int type; /* Type of physical device or protocol */ + unsigned int size; /* Size of the data allocated by the caller */ + union { + /* {atm/eth/dsl}_settings anyone ? */ + raw_hdlc_proto __user *raw_hdlc; + cisco_proto __user *cisco; + fr_proto __user *fr; + fr_proto_pvc __user *fr_pvc; + fr_proto_pvc_info __user *fr_pvc_info; + + /* interface settings */ + sync_serial_settings __user *sync; + te1_settings __user *te1; + } ifs_ifsu; +}; + +/* + * Interface request structure used for socket + * ioctl's. All interface ioctl's must have parameter + * definitions which begin with ifr_name. The + * remainder may be interface specific. + */ + +struct ifreq +{ +#define IFHWADDRLEN 6 + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ + } ifr_ifrn; + + union { + struct sockaddr ifru_addr; + struct sockaddr ifru_dstaddr; + struct sockaddr ifru_broadaddr; + struct sockaddr ifru_netmask; + struct sockaddr ifru_hwaddr; + short ifru_flags; + int ifru_ivalue; + int ifru_mtu; + struct ifmap ifru_map; + char ifru_slave[IFNAMSIZ]; /* Just fits the size */ + char ifru_newname[IFNAMSIZ]; + void __user * ifru_data; + struct if_settings ifru_settings; + } ifr_ifru; +}; + +#define ifr_name ifr_ifrn.ifrn_name /* interface name */ +#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ +#define ifr_addr ifr_ifru.ifru_addr /* address */ +#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ +#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ +#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ +#define ifr_flags ifr_ifru.ifru_flags /* flags */ +#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ +#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ +#define ifr_map ifr_ifru.ifru_map /* device map */ +#define ifr_slave ifr_ifru.ifru_slave /* slave device */ +#define ifr_data ifr_ifru.ifru_data /* for use by interface */ +#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ +#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ +#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ +#define ifr_newname ifr_ifru.ifru_newname /* New name */ +#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ + +/* + * Structure used in SIOCGIFCONF request. + * Used to retrieve interface configuration + * for machine (useful for programs which + * must know all networks accessible). + */ + +struct ifconf +{ + int ifc_len; /* size of buffer */ + union + { + char __user *ifcu_buf; + struct ifreq __user *ifcu_req; + } ifc_ifcu; +}; +#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ +#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ + + +#endif /* _LINUX_IF_H */ |
