summaryrefslogtreecommitdiffstats
path: root/include/linux/ieee80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/ieee80211.h')
-rw-r--r--include/linux/ieee80211.h212
1 files changed, 170 insertions, 42 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 14126bc..c4e6ca1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -12,8 +12,8 @@
* published by the Free Software Foundation.
*/
-#ifndef IEEE80211_H
-#define IEEE80211_H
+#ifndef LINUX_IEEE80211_H
+#define LINUX_IEEE80211_H
#include <linux/types.h>
#include <asm/byteorder.h>
@@ -97,7 +97,10 @@
#define IEEE80211_MAX_FRAME_LEN 2352
#define IEEE80211_MAX_SSID_LEN 32
+
#define IEEE80211_MAX_MESH_ID_LEN 32
+#define IEEE80211_MESH_CONFIG_LEN 19
+
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
@@ -666,6 +669,13 @@ struct ieee80211_cts {
u8 ra[6];
} __attribute__ ((packed));
+struct ieee80211_pspoll {
+ __le16 frame_control;
+ __le16 aid;
+ u8 bssid[6];
+ u8 ta[6];
+} __attribute__ ((packed));
+
/**
* struct ieee80211_bar - HT Block Ack Request
*
@@ -685,28 +695,88 @@ struct ieee80211_bar {
#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
+#define IEEE80211_HT_MCS_MASK_LEN 10
+
+/**
+ * struct ieee80211_mcs_info - MCS information
+ * @rx_mask: RX mask
+ * @rx_highest: highest supported RX rate
+ * @tx_params: TX parameters
+ */
+struct ieee80211_mcs_info {
+ u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
+ __le16 rx_highest;
+ u8 tx_params;
+ u8 reserved[3];
+} __attribute__((packed));
+
+/* 802.11n HT capability MSC set */
+#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff
+#define IEEE80211_HT_MCS_TX_DEFINED 0x01
+#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02
+/* value 0 == 1 stream etc */
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4
+#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10
+
+/*
+ * 802.11n D5.0 20.3.5 / 20.6 says:
+ * - indices 0 to 7 and 32 are single spatial stream
+ * - 8 to 31 are multiple spatial streams using equal modulation
+ * [8..15 for two streams, 16..23 for three and 24..31 for four]
+ * - remainder are multiple spatial streams using unequal modulation
+ */
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
+ (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
+
/**
* struct ieee80211_ht_cap - HT capabilities
*
- * This structure refers to "HT capabilities element" as
- * described in 802.11n draft section 7.3.2.52
+ * This structure is the "HT capabilities element" as
+ * described in 802.11n D5.0 7.3.2.57
*/
struct ieee80211_ht_cap {
__le16 cap_info;
u8 ampdu_params_info;
- u8 supp_mcs_set[16];
+
+ /* 16 bytes MCS information */
+ struct ieee80211_mcs_info mcs;
+
__le16 extended_ht_cap_info;
__le32 tx_BF_cap_info;
u8 antenna_selection_info;
} __attribute__ ((packed));
+/* 802.11n HT capabilities masks (for cap_info) */
+#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
+#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
+#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+#define IEEE80211_HT_CAP_SGI_20 0x0020
+#define IEEE80211_HT_CAP_SGI_40 0x0040
+#define IEEE80211_HT_CAP_TX_STBC 0x0080
+#define IEEE80211_HT_CAP_RX_STBC 0x0300
+#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
+#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+
+/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
+#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
+#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+
/**
- * struct ieee80211_ht_cap - HT additional information
+ * struct ieee80211_ht_info - HT information
*
- * This structure refers to "HT information element" as
- * described in 802.11n draft section 7.3.2.53
+ * This structure is the "HT information element" as
+ * described in 802.11n D5.0 7.3.2.58
*/
-struct ieee80211_ht_addt_info {
+struct ieee80211_ht_info {
u8 control_chan;
u8 ht_param;
__le16 operation_mode;
@@ -714,36 +784,33 @@ struct ieee80211_ht_addt_info {
u8 basic_set[16];
} __attribute__ ((packed));
-/* 802.11n HT capabilities masks */
-#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
-#define IEEE80211_HT_CAP_SM_PS 0x000C
-#define IEEE80211_HT_CAP_GRN_FLD 0x0010
-#define IEEE80211_HT_CAP_SGI_20 0x0020
-#define IEEE80211_HT_CAP_SGI_40 0x0040
-#define IEEE80211_HT_CAP_DELAY_BA 0x0400
-#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
-#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
-/* 802.11n HT capability AMPDU settings */
-#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
-#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
-/* 802.11n HT capability MSC set */
-#define IEEE80211_SUPP_MCS_SET_UEQM 4
-#define IEEE80211_HT_CAP_MAX_STREAMS 4
-#define IEEE80211_SUPP_MCS_SET_LEN 10
-/* maximum streams the spec allows */
-#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
-#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
-#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
-#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
-/* 802.11n HT IE masks */
-#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
-#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
-#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
-#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
-#define IEEE80211_HT_IE_CHA_WIDTH 0x04
-#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
-#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
-#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
+/* for ht_param */
+#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03
+#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00
+#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01
+#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
+#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
+#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
+#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10
+#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0
+
+/* for operation_mode */
+#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1
+#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2
+#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3
+#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004
+#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010
+
+/* for stbc_param */
+#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040
+#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080
+#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100
+#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200
+#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400
+#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800
+
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
@@ -769,7 +836,6 @@ struct ieee80211_ht_addt_info {
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FAST_BSS_TRANSITION 2
#define WLAN_AUTH_LEAP 128
#define WLAN_AUTH_CHALLENGE_LEN 128
@@ -949,7 +1015,7 @@ enum ieee80211_eid {
WLAN_EID_EXT_SUPP_RATES = 50,
/* 802.11n */
WLAN_EID_HT_CAPABILITY = 45,
- WLAN_EID_HT_EXTRA_INFO = 61,
+ WLAN_EID_HT_INFORMATION = 61,
/* 802.11i */
WLAN_EID_RSN = 48,
WLAN_EID_WPA = 221,
@@ -976,6 +1042,68 @@ enum ieee80211_spectrum_mgmt_actioncode {
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
};
+/*
+ * IEEE 802.11-2007 7.3.2.9 Country information element
+ *
+ * Minimum length is 8 octets, ie len must be evenly
+ * divisible by 2
+ */
+
+/* Although the spec says 8 I'm seeing 6 in practice */
+#define IEEE80211_COUNTRY_IE_MIN_LEN 6
+
+/*
+ * For regulatory extension stuff see IEEE 802.11-2007
+ * Annex I (page 1141) and Annex J (page 1147). Also
+ * review 7.3.2.9.
+ *
+ * When dot11RegulatoryClassesRequired is true and the
+ * first_channel/reg_extension_id is >= 201 then the IE
+ * compromises of the 'ext' struct represented below:
+ *
+ * - Regulatory extension ID - when generating IE this just needs
+ * to be monotonically increasing for each triplet passed in
+ * the IE
+ * - Regulatory class - index into set of rules
+ * - Coverage class - index into air propagation time (Table 7-27),
+ * in microseconds, you can compute the air propagation time from
+ * the index by multiplying by 3, so index 10 yields a propagation
+ * of 10 us. Valid values are 0-31, values 32-255 are not defined
+ * yet. A value of 0 inicates air propagation of <= 1 us.
+ *
+ * See also Table I.2 for Emission limit sets and table
+ * I.3 for Behavior limit sets. Table J.1 indicates how to map
+ * a reg_class to an emission limit set and behavior limit set.
+ */
+#define IEEE80211_COUNTRY_EXTENSION_ID 201
+
+/*
+ * Channels numbers in the IE must be monotonically increasing
+ * if dot11RegulatoryClassesRequired is not true.
+ *
+ * If dot11RegulatoryClassesRequired is true consecutive
+ * subband triplets following a regulatory triplet shall
+ * have monotonically increasing first_channel number fields.
+ *
+ * Channel numbers shall not overlap.
+ *
+ * Note that max_power is signed.
+ */
+struct ieee80211_country_ie_triplet {
+ union {
+ struct {
+ u8 first_channel;
+ u8 num_channels;
+ s8 max_power;
+ } __attribute__ ((packed)) chans;
+ struct {
+ u8 reg_extension_id;
+ u8 reg_class;
+ u8 coverage_class;
+ } __attribute__ ((packed)) ext;
+ };
+} __attribute__ ((packed));
+
/* BACK action code */
enum ieee80211_back_actioncode {
WLAN_ACTION_ADDBA_REQ = 0,
@@ -1057,4 +1185,4 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
return hdr->addr1;
}
-#endif /* IEEE80211_H */
+#endif /* LINUX_IEEE80211_H */
OpenPOWER on IntegriCloud