diff options
Diffstat (limited to 'include/linux/i2o.h')
| -rw-r--r-- | include/linux/i2o.h | 976 |
1 files changed, 552 insertions, 424 deletions
diff --git a/include/linux/i2o.h b/include/linux/i2o.h index d79c8a4..9ba8067 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -30,6 +30,7 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/workqueue.h> /* work_struct */ +#include <linux/mempool.h> #include <asm/io.h> #include <asm/semaphore.h> /* Needed for MUTEX init macros */ @@ -38,6 +39,355 @@ #define I2O_QUEUE_EMPTY 0xffffffff /* + * Cache strategies + */ + +/* The NULL strategy leaves everything up to the controller. This tends to be a + * pessimal but functional choice. + */ +#define CACHE_NULL 0 +/* Prefetch data when reading. We continually attempt to load the next 32 sectors + * into the controller cache. + */ +#define CACHE_PREFETCH 1 +/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors + * into the controller cache. When an I/O is less <= 8K we assume its probably + * not sequential and don't prefetch (default) + */ +#define CACHE_SMARTFETCH 2 +/* Data is written to the cache and then out on to the disk. The I/O must be + * physically on the medium before the write is acknowledged (default without + * NVRAM) + */ +#define CACHE_WRITETHROUGH 17 +/* Data is written to the cache and then out on to the disk. The controller + * is permitted to write back the cache any way it wants. (default if battery + * backed NVRAM is present). It can be useful to set this for swap regardless of + * battery state. + */ +#define CACHE_WRITEBACK 18 +/* Optimise for under powered controllers, especially on RAID1 and RAID0. We + * write large I/O's directly to disk bypassing the cache to avoid the extra + * memory copy hits. Small writes are writeback cached + */ +#define CACHE_SMARTBACK 19 +/* Optimise for under powered controllers, especially on RAID1 and RAID0. We + * write large I/O's directly to disk bypassing the cache to avoid the extra + * memory copy hits. Small writes are writethrough cached. Suitable for devices + * lacking battery backup + */ +#define CACHE_SMARTTHROUGH 20 + +/* + * Ioctl structures + */ + +#define BLKI2OGRSTRAT _IOR('2', 1, int) +#define BLKI2OGWSTRAT _IOR('2', 2, int) +#define BLKI2OSRSTRAT _IOW('2', 3, int) +#define BLKI2OSWSTRAT _IOW('2', 4, int) + +/* + * I2O Function codes + */ + +/* + * Executive Class + */ +#define I2O_CMD_ADAPTER_ASSIGN 0xB3 +#define I2O_CMD_ADAPTER_READ 0xB2 +#define I2O_CMD_ADAPTER_RELEASE 0xB5 +#define I2O_CMD_BIOS_INFO_SET 0xA5 +#define I2O_CMD_BOOT_DEVICE_SET 0xA7 +#define I2O_CMD_CONFIG_VALIDATE 0xBB +#define I2O_CMD_CONN_SETUP 0xCA +#define I2O_CMD_DDM_DESTROY 0xB1 +#define I2O_CMD_DDM_ENABLE 0xD5 +#define I2O_CMD_DDM_QUIESCE 0xC7 +#define I2O_CMD_DDM_RESET 0xD9 +#define I2O_CMD_DDM_SUSPEND 0xAF +#define I2O_CMD_DEVICE_ASSIGN 0xB7 +#define I2O_CMD_DEVICE_RELEASE 0xB9 +#define I2O_CMD_HRT_GET 0xA8 +#define I2O_CMD_ADAPTER_CLEAR 0xBE +#define I2O_CMD_ADAPTER_CONNECT 0xC9 +#define I2O_CMD_ADAPTER_RESET 0xBD +#define I2O_CMD_LCT_NOTIFY 0xA2 +#define I2O_CMD_OUTBOUND_INIT 0xA1 +#define I2O_CMD_PATH_ENABLE 0xD3 +#define I2O_CMD_PATH_QUIESCE 0xC5 +#define I2O_CMD_PATH_RESET 0xD7 +#define I2O_CMD_STATIC_MF_CREATE 0xDD +#define I2O_CMD_STATIC_MF_RELEASE 0xDF +#define I2O_CMD_STATUS_GET 0xA0 +#define I2O_CMD_SW_DOWNLOAD 0xA9 +#define I2O_CMD_SW_UPLOAD 0xAB +#define I2O_CMD_SW_REMOVE 0xAD +#define I2O_CMD_SYS_ENABLE 0xD1 +#define I2O_CMD_SYS_MODIFY 0xC1 +#define I2O_CMD_SYS_QUIESCE 0xC3 +#define I2O_CMD_SYS_TAB_SET 0xA3 + +/* + * Utility Class + */ +#define I2O_CMD_UTIL_NOP 0x00 +#define I2O_CMD_UTIL_ABORT 0x01 +#define I2O_CMD_UTIL_CLAIM 0x09 +#define I2O_CMD_UTIL_RELEASE 0x0B +#define I2O_CMD_UTIL_PARAMS_GET 0x06 +#define I2O_CMD_UTIL_PARAMS_SET 0x05 +#define I2O_CMD_UTIL_EVT_REGISTER 0x13 +#define I2O_CMD_UTIL_EVT_ACK 0x14 +#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10 +#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D +#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F +#define I2O_CMD_UTIL_LOCK 0x17 +#define I2O_CMD_UTIL_LOCK_RELEASE 0x19 +#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15 + +/* + * SCSI Host Bus Adapter Class + */ +#define I2O_CMD_SCSI_EXEC 0x81 +#define I2O_CMD_SCSI_ABORT 0x83 +#define I2O_CMD_SCSI_BUSRESET 0x27 + +/* + * Bus Adapter Class + */ +#define I2O_CMD_BUS_ADAPTER_RESET 0x85 +#define I2O_CMD_BUS_RESET 0x87 +#define I2O_CMD_BUS_SCAN 0x89 +#define I2O_CMD_BUS_QUIESCE 0x8b + +/* + * Random Block Storage Class + */ +#define I2O_CMD_BLOCK_READ 0x30 +#define I2O_CMD_BLOCK_WRITE 0x31 +#define I2O_CMD_BLOCK_CFLUSH 0x37 +#define I2O_CMD_BLOCK_MLOCK 0x49 +#define I2O_CMD_BLOCK_MUNLOCK 0x4B +#define I2O_CMD_BLOCK_MMOUNT 0x41 +#define I2O_CMD_BLOCK_MEJECT 0x43 +#define I2O_CMD_BLOCK_POWER 0x70 + +#define I2O_CMD_PRIVATE 0xFF + +/* Command status values */ + +#define I2O_CMD_IN_PROGRESS 0x01 +#define I2O_CMD_REJECTED 0x02 +#define I2O_CMD_FAILED 0x03 +#define I2O_CMD_COMPLETED 0x04 + +/* I2O API function return values */ + +#define I2O_RTN_NO_ERROR 0 +#define I2O_RTN_NOT_INIT 1 +#define I2O_RTN_FREE_Q_EMPTY 2 +#define I2O_RTN_TCB_ERROR 3 +#define I2O_RTN_TRANSACTION_ERROR 4 +#define I2O_RTN_ADAPTER_ALREADY_INIT 5 +#define I2O_RTN_MALLOC_ERROR 6 +#define I2O_RTN_ADPTR_NOT_REGISTERED 7 +#define I2O_RTN_MSG_REPLY_TIMEOUT 8 +#define I2O_RTN_NO_STATUS 9 +#define I2O_RTN_NO_FIRM_VER 10 +#define I2O_RTN_NO_LINK_SPEED 11 + +/* Reply message status defines for all messages */ + +#define I2O_REPLY_STATUS_SUCCESS 0x00 +#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01 +#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02 +#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03 +#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04 +#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05 +#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06 +#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08 +#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09 +#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A +#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B +#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80 + +/* Status codes and Error Information for Parameter functions */ + +#define I2O_PARAMS_STATUS_SUCCESS 0x00 +#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01 +#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02 +#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03 +#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04 +#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05 +#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06 +#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07 +#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08 +#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09 +#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A +#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B +#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C +#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D +#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E +#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F +#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10 + +/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error + * messages: Table 3-2 Detailed Status Codes.*/ + +#define I2O_DSC_SUCCESS 0x0000 +#define I2O_DSC_BAD_KEY 0x0002 +#define I2O_DSC_TCL_ERROR 0x0003 +#define I2O_DSC_REPLY_BUFFER_FULL 0x0004 +#define I2O_DSC_NO_SUCH_PAGE 0x0005 +#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006 +#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007 +#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009 +#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A +#define I2O_DSC_DEVICE_LOCKED 0x000B +#define I2O_DSC_DEVICE_RESET 0x000C +#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D +#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E +#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F +#define I2O_DSC_INVALID_OFFSET 0x0010 +#define I2O_DSC_INVALID_PARAMETER 0x0011 +#define I2O_DSC_INVALID_REQUEST 0x0012 +#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013 +#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014 +#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015 +#define I2O_DSC_MISSING_PARAMETER 0x0016 +#define I2O_DSC_TIMEOUT 0x0017 +#define I2O_DSC_UNKNOWN_ERROR 0x0018 +#define I2O_DSC_UNKNOWN_FUNCTION 0x0019 +#define I2O_DSC_UNSUPPORTED_VERSION 0x001A +#define I2O_DSC_DEVICE_BUSY 0x001B +#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C + +/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed + Status Codes.*/ + +#define I2O_BSA_DSC_SUCCESS 0x0000 +#define I2O_BSA_DSC_MEDIA_ERROR 0x0001 +#define I2O_BSA_DSC_ACCESS_ERROR 0x0002 +#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003 +#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004 +#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005 +#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006 +#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007 +#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008 +#define I2O_BSA_DSC_BUS_FAILURE 0x0009 +#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A +#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B +#define I2O_BSA_DSC_DEVICE_RESET 0x000C +#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D +#define I2O_BSA_DSC_TIMEOUT 0x000E + +/* FailureStatusCodes, Table 3-3 Message Failure Codes */ + +#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81 +#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82 +#define I2O_FSC_TRANSPORT_CONGESTION 0x83 +#define I2O_FSC_TRANSPORT_FAILURE 0x84 +#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85 +#define I2O_FSC_TRANSPORT_TIME_OUT 0x86 +#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87 +#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88 +#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89 +#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A +#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B +#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C +#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D +#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E +#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F +#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF + +/* Device Claim Types */ +#define I2O_CLAIM_PRIMARY 0x01000000 +#define I2O_CLAIM_MANAGEMENT 0x02000000 +#define I2O_CLAIM_AUTHORIZED 0x03000000 +#define I2O_CLAIM_SECONDARY 0x04000000 + +/* Message header defines for VersionOffset */ +#define I2OVER15 0x0001 +#define I2OVER20 0x0002 + +/* Default is 1.5 */ +#define I2OVERSION I2OVER15 + +#define SGL_OFFSET_0 I2OVERSION +#define SGL_OFFSET_4 (0x0040 | I2OVERSION) +#define SGL_OFFSET_5 (0x0050 | I2OVERSION) +#define SGL_OFFSET_6 (0x0060 | I2OVERSION) +#define SGL_OFFSET_7 (0x0070 | I2OVERSION) +#define SGL_OFFSET_8 (0x0080 | I2OVERSION) +#define SGL_OFFSET_9 (0x0090 | I2OVERSION) +#define SGL_OFFSET_10 (0x00A0 | I2OVERSION) +#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) +#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) +#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) + +/* Transaction Reply Lists (TRL) Control Word structure */ +#define TRL_SINGLE_FIXED_LENGTH 0x00 +#define TRL_SINGLE_VARIABLE_LENGTH 0x40 +#define TRL_MULTIPLE_FIXED_LENGTH 0x80 + + /* msg header defines for MsgFlags */ +#define MSG_STATIC 0x0100 +#define MSG_64BIT_CNTXT 0x0200 +#define MSG_MULTI_TRANS 0x1000 +#define MSG_FAIL 0x2000 +#define MSG_FINAL 0x4000 +#define MSG_REPLY 0x8000 + + /* minimum size msg */ +#define THREE_WORD_MSG_SIZE 0x00030000 +#define FOUR_WORD_MSG_SIZE 0x00040000 +#define FIVE_WORD_MSG_SIZE 0x00050000 +#define SIX_WORD_MSG_SIZE 0x00060000 +#define SEVEN_WORD_MSG_SIZE 0x00070000 +#define EIGHT_WORD_MSG_SIZE 0x00080000 +#define NINE_WORD_MSG_SIZE 0x00090000 +#define TEN_WORD_MSG_SIZE 0x000A0000 +#define ELEVEN_WORD_MSG_SIZE 0x000B0000 +#define I2O_MESSAGE_SIZE(x) ((x)<<16) + +/* special TID assignments */ +#define ADAPTER_TID 0 +#define HOST_TID 1 + +/* outbound queue defines */ +#define I2O_MAX_OUTBOUND_MSG_FRAMES 128 +#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ + +/* inbound queue definitions */ +#define I2O_MSG_INPOOL_MIN 32 +#define I2O_INBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ + +#define I2O_POST_WAIT_OK 0 +#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT + +#define I2O_CONTEXT_LIST_MIN_LENGTH 15 +#define I2O_CONTEXT_LIST_USED 0x01 +#define I2O_CONTEXT_LIST_DELETED 0x02 + +/* timeouts */ +#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15 +#define I2O_TIMEOUT_MESSAGE_GET 5 +#define I2O_TIMEOUT_RESET 30 +#define I2O_TIMEOUT_STATUS_GET 5 +#define I2O_TIMEOUT_LCT_GET 360 +#define I2O_TIMEOUT_SCSI_SCB_ABORT 240 + +/* retries */ +#define I2O_HRT_GET_TRIES 3 +#define I2O_LCT_GET_TRIES 3 + +/* defines for max_sectors and max_phys_segments */ +#define I2O_MAX_SECTORS 1024 +#define I2O_MAX_SECTORS_LIMITED 128 +#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS + +/* * Message structures */ struct i2o_message { @@ -58,6 +408,12 @@ struct i2o_message { u32 body[0]; }; +/* MFA and I2O message used by mempool */ +struct i2o_msg_mfa { + u32 mfa; /* MFA returned by the controller */ + struct i2o_message msg; /* I2O message */ +}; + /* * Each I2O device entity has one of these. There is one per device. */ @@ -130,6 +486,15 @@ struct i2o_dma { }; /* + * Contains slab cache and mempool information + */ +struct i2o_pool { + char *name; + kmem_cache_t *slab; + mempool_t *mempool; +}; + +/* * Contains IO mapped address information */ struct i2o_io { @@ -174,8 +539,6 @@ struct i2o_controller { void __iomem *irq_status; /* Interrupt status register address */ void __iomem *irq_mask; /* Interrupt mask register address */ - /* Dynamic LCT related data */ - struct i2o_dma status; /* IOP status block */ struct i2o_dma hrt; /* HW Resource Table */ @@ -188,6 +551,8 @@ struct i2o_controller { struct i2o_io in_queue; /* inbound message queue Host->IOP */ struct i2o_dma out_queue; /* outbound message queue IOP->Host */ + struct i2o_pool in_msg; /* mempool for inbound messages */ + unsigned int battery:1; /* Has a battery backup */ unsigned int io_alloc:1; /* An I/O resource was allocated */ unsigned int mem_alloc:1; /* A memory resource was allocated */ @@ -196,7 +561,6 @@ struct i2o_controller { struct resource mem_resource; /* Mem resource allocated to the IOP */ struct device device; - struct class_device *classdev; /* I2O controller class device */ struct i2o_device *exec; /* Executive */ #if BITS_PER_LONG == 64 spinlock_t context_list_lock; /* lock for context_list */ @@ -247,16 +611,13 @@ struct i2o_sys_tbl { extern struct list_head i2o_controllers; /* Message functions */ -static inline u32 i2o_msg_get(struct i2o_controller *, - struct i2o_message __iomem **); -extern u32 i2o_msg_get_wait(struct i2o_controller *, - struct i2o_message __iomem **, int); -static inline void i2o_msg_post(struct i2o_controller *, u32); -static inline int i2o_msg_post_wait(struct i2o_controller *, u32, - unsigned long); -extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long, - struct i2o_dma *); -extern void i2o_msg_nop(struct i2o_controller *, u32); +static inline struct i2o_message *i2o_msg_get(struct i2o_controller *); +extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int); +static inline void i2o_msg_post(struct i2o_controller *, struct i2o_message *); +static inline int i2o_msg_post_wait(struct i2o_controller *, + struct i2o_message *, unsigned long); +extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *, + unsigned long, struct i2o_dma *); static inline void i2o_flush_reply(struct i2o_controller *, u32); /* IOP functions */ @@ -384,10 +745,10 @@ static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, size_t size, enum dma_data_direction direction, - u32 __iomem ** sg_ptr) + u32 ** sg_ptr) { u32 sg_flags; - u32 __iomem *mptr = *sg_ptr; + u32 *mptr = *sg_ptr; dma_addr_t dma_addr; switch (direction) { @@ -405,16 +766,16 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, if (!dma_mapping_error(dma_addr)) { #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - writel(0x7C020002, mptr++); - writel(PAGE_SIZE, mptr++); + *mptr++ = cpu_to_le32(0x7C020002); + *mptr++ = cpu_to_le32(PAGE_SIZE); } #endif - writel(sg_flags | size, mptr++); - writel(i2o_dma_low(dma_addr), mptr++); + *mptr++ = cpu_to_le32(sg_flags | size); + *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr)); #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 if ((sizeof(dma_addr_t) > 4) && c->pae_support) - writel(i2o_dma_high(dma_addr), mptr++); + *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr)); #endif *sg_ptr = mptr; } @@ -439,10 +800,10 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, static inline int i2o_dma_map_sg(struct i2o_controller *c, struct scatterlist *sg, int sg_count, enum dma_data_direction direction, - u32 __iomem ** sg_ptr) + u32 ** sg_ptr) { u32 sg_flags; - u32 __iomem *mptr = *sg_ptr; + u32 *mptr = *sg_ptr; switch (direction) { case DMA_TO_DEVICE: @@ -461,19 +822,19 @@ static inline int i2o_dma_map_sg(struct i2o_controller *c, #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - writel(0x7C020002, mptr++); - writel(PAGE_SIZE, mptr++); + *mptr++ = cpu_to_le32(0x7C020002); + *mptr++ = cpu_to_le32(PAGE_SIZE); } #endif while (sg_count-- > 0) { if (!sg_count) sg_flags |= 0xC0000000; - writel(sg_flags | sg_dma_len(sg), mptr++); - writel(i2o_dma_low(sg_dma_address(sg)), mptr++); + *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg)); + *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg))); #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 if ((sizeof(dma_addr_t) > 4) && c->pae_support) - writel(i2o_dma_high(sg_dma_address(sg)), mptr++); + *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg))); #endif sg++; } @@ -563,6 +924,64 @@ static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, return 0; }; +/* + * i2o_pool_alloc - Allocate an slab cache and mempool + * @mempool: pointer to struct i2o_pool to write data into. + * @name: name which is used to identify cache + * @size: size of each object + * @min_nr: minimum number of objects + * + * First allocates a slab cache with name and size. Then allocates a + * mempool which uses the slab cache for allocation and freeing. + * + * Returns 0 on success or negative error code on failure. + */ +static inline int i2o_pool_alloc(struct i2o_pool *pool, const char *name, + size_t size, int min_nr) +{ + pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL); + if (!pool->name) + goto exit; + strcpy(pool->name, name); + + pool->slab = + kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL, + NULL); + if (!pool->slab) + goto free_name; + + pool->mempool = + mempool_create(min_nr, mempool_alloc_slab, mempool_free_slab, + pool->slab); + if (!pool->mempool) + goto free_slab; + + return 0; + + free_slab: + kmem_cache_destroy(pool->slab); + + free_name: + kfree(pool->name); + + exit: + return -ENOMEM; +}; + +/* + * i2o_pool_free - Free slab cache and mempool again + * @mempool: pointer to struct i2o_pool which should be freed + * + * Note that you have to return all objects to the mempool again before + * calling i2o_pool_free(). + */ +static inline void i2o_pool_free(struct i2o_pool *pool) +{ + mempool_destroy(pool->mempool); + kmem_cache_destroy(pool->slab); + kfree(pool->name); +}; + /* I2O driver (OSM) functions */ extern int i2o_driver_register(struct i2o_driver *); extern void i2o_driver_unregister(struct i2o_driver *); @@ -638,39 +1057,89 @@ extern int i2o_exec_lct_get(struct i2o_controller *); #define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj)) /** + * i2o_out_to_virt - Turn an I2O message to a virtual address + * @c: controller + * @m: message engine value + * + * Turn a receive message from an I2O controller bus address into + * a Linux virtual address. The shared page frame is a linear block + * so we simply have to shift the offset. This function does not + * work for sender side messages as they are ioremap objects + * provided by the I2O controller. + */ +static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c, + u32 m) +{ + BUG_ON(m < c->out_queue.phys + || m >= c->out_queue.phys + c->out_queue.len); + + return c->out_queue.virt + (m - c->out_queue.phys); +}; + +/** + * i2o_msg_in_to_virt - Turn an I2O message to a virtual address + * @c: controller + * @m: message engine value + * + * Turn a send message from an I2O controller bus address into + * a Linux virtual address. The shared page frame is a linear block + * so we simply have to shift the offset. This function does not + * work for receive side messages as they are kmalloc objects + * in a different pool. + */ +static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct + i2o_controller *c, + u32 m) +{ + return c->in_queue.virt + m; +}; + +/** * i2o_msg_get - obtain an I2O message from the IOP * @c: I2O controller - * @msg: pointer to a I2O message pointer * - * This function tries to get a message slot. If no message slot is + * This function tries to get a message frame. If no message frame is * available do not wait until one is availabe (see also i2o_msg_get_wait). + * The returned pointer to the message frame is not in I/O memory, it is + * allocated from a mempool. But because a MFA is allocated from the + * controller too it is guaranteed that i2o_msg_post() will never fail. * - * On a success the message is returned and the pointer to the message is - * set in msg. The returned message is the physical page frame offset - * address from the read port (see the i2o spec). If no message is - * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. + * On a success a pointer to the message frame is returned. If the message + * queue is empty -EBUSY is returned and if no memory is available -ENOMEM + * is returned. */ -static inline u32 i2o_msg_get(struct i2o_controller *c, - struct i2o_message __iomem ** msg) +static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c) { - u32 m = readl(c->in_port); - - if (m != I2O_QUEUE_EMPTY) - *msg = c->in_queue.virt + m; + struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC); + if (!mmsg) + return ERR_PTR(-ENOMEM); + + mmsg->mfa = readl(c->in_port); + if (mmsg->mfa == I2O_QUEUE_EMPTY) { + mempool_free(mmsg, c->in_msg.mempool); + return ERR_PTR(-EBUSY); + } - return m; + return &mmsg->msg; }; /** * i2o_msg_post - Post I2O message to I2O controller * @c: I2O controller to which the message should be send - * @m: the message identifier + * @msg: message returned by i2o_msg_get() * - * Post the message to the I2O controller. + * Post the message to the I2O controller and return immediately. */ -static inline void i2o_msg_post(struct i2o_controller *c, u32 m) +static inline void i2o_msg_post(struct i2o_controller *c, + struct i2o_message *msg) { - writel(m, c->in_port); + struct i2o_msg_mfa *mmsg; + + mmsg = container_of(msg, struct i2o_msg_mfa, msg); + memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg, + (le32_to_cpu(msg->u.head[0]) >> 16) << 2); + writel(mmsg->mfa, c->in_port); + mempool_free(mmsg, c->in_msg.mempool); }; /** @@ -685,62 +1154,66 @@ static inline void i2o_msg_post(struct i2o_controller *c, u32 m) * * Returns 0 on success or negative error code on failure. */ -static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m, +static inline int i2o_msg_post_wait(struct i2o_controller *c, + struct i2o_message *msg, unsigned long timeout) { - return i2o_msg_post_wait_mem(c, m, timeout, NULL); + return i2o_msg_post_wait_mem(c, msg, timeout, NULL); }; /** - * i2o_flush_reply - Flush reply from I2O controller - * @c: I2O controller - * @m: the message identifier + * i2o_msg_nop_mfa - Returns a fetched MFA back to the controller + * @c: I2O controller from which the MFA was fetched + * @mfa: MFA which should be returned * - * The I2O controller must be informed that the reply message is not needed - * anymore. If you forget to flush the reply, the message frame can't be - * used by the controller anymore and is therefore lost. + * This function must be used for preserved messages, because i2o_msg_nop() + * also returns the allocated memory back to the msg_pool mempool. */ -static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) +static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa) { - writel(m, c->out_port); + struct i2o_message __iomem *msg; + u32 nop[3] = { + THREE_WORD_MSG_SIZE | SGL_OFFSET_0, + I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID, + 0x00000000 + }; + + msg = i2o_msg_in_to_virt(c, mfa); + memcpy_toio(msg, nop, sizeof(nop)); + writel(mfa, c->in_port); }; /** - * i2o_out_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value + * i2o_msg_nop - Returns a message which is not used + * @c: I2O controller from which the message was created + * @msg: message which should be returned * - * Turn a receive message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for sender side messages as they are ioremap objects - * provided by the I2O controller. + * If you fetch a message via i2o_msg_get, and can't use it, you must + * return the message with this function. Otherwise the MFA is lost as well + * as the allocated memory from the mempool. */ -static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c, - u32 m) +static inline void i2o_msg_nop(struct i2o_controller *c, + struct i2o_message *msg) { - BUG_ON(m < c->out_queue.phys - || m >= c->out_queue.phys + c->out_queue.len); + struct i2o_msg_mfa *mmsg; + mmsg = container_of(msg, struct i2o_msg_mfa, msg); - return c->out_queue.virt + (m - c->out_queue.phys); + i2o_msg_nop_mfa(c, mmsg->mfa); + mempool_free(mmsg, c->in_msg.mempool); }; /** - * i2o_msg_in_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value + * i2o_flush_reply - Flush reply from I2O controller + * @c: I2O controller + * @m: the message identifier * - * Turn a send message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for receive side messages as they are kmalloc objects - * in a different pool. + * The I2O controller must be informed that the reply message is not needed + * anymore. If you forget to flush the reply, the message frame can't be + * used by the controller anymore and is therefore lost. */ -static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct - i2o_controller *c, - u32 m) +static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) { - return c->in_queue.virt + m; + writel(m, c->out_port); }; /* @@ -779,350 +1252,5 @@ extern void i2o_dump_message(struct i2o_message *); extern void i2o_dump_hrt(struct i2o_controller *c); extern void i2o_debug_state(struct i2o_controller *c); -/* - * Cache strategies - */ - -/* The NULL strategy leaves everything up to the controller. This tends to be a - * pessimal but functional choice. - */ -#define CACHE_NULL 0 -/* Prefetch data when reading. We continually attempt to load the next 32 sectors - * into the controller cache. - */ -#define CACHE_PREFETCH 1 -/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors - * into the controller cache. When an I/O is less <= 8K we assume its probably - * not sequential and don't prefetch (default) - */ -#define CACHE_SMARTFETCH 2 -/* Data is written to the cache and then out on to the disk. The I/O must be - * physically on the medium before the write is acknowledged (default without - * NVRAM) - */ -#define CACHE_WRITETHROUGH 17 -/* Data is written to the cache and then out on to the disk. The controller - * is permitted to write back the cache any way it wants. (default if battery - * backed NVRAM is present). It can be useful to set this for swap regardless of - * battery state. - */ -#define CACHE_WRITEBACK 18 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writeback cached - */ -#define CACHE_SMARTBACK 19 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writethrough cached. Suitable for devices - * lacking battery backup - */ -#define CACHE_SMARTTHROUGH 20 - -/* - * Ioctl structures - */ - -#define BLKI2OGRSTRAT _IOR('2', 1, int) -#define BLKI2OGWSTRAT _IOR('2', 2, int) -#define BLKI2OSRSTRAT _IOW('2', 3, int) -#define BLKI2OSWSTRAT _IOW('2', 4, int) - -/* - * I2O Function codes - */ - -/* - * Executive Class - */ -#define I2O_CMD_ADAPTER_ASSIGN 0xB3 -#define I2O_CMD_ADAPTER_READ 0xB2 -#define I2O_CMD_ADAPTER_RELEASE 0xB5 -#define I2O_CMD_BIOS_INFO_SET 0xA5 -#define I2O_CMD_BOOT_DEVICE_SET 0xA7 -#define I2O_CMD_CONFIG_VALIDATE 0xBB -#define I2O_CMD_CONN_SETUP 0xCA -#define I2O_CMD_DDM_DESTROY 0xB1 -#define I2O_CMD_DDM_ENABLE 0xD5 -#define I2O_CMD_DDM_QUIESCE 0xC7 -#define I2O_CMD_DDM_RESET 0xD9 -#define I2O_CMD_DDM_SUSPEND 0xAF -#define I2O_CMD_DEVICE_ASSIGN 0xB7 -#define I2O_CMD_DEVICE_RELEASE 0xB9 -#define I2O_CMD_HRT_GET 0xA8 -#define I2O_CMD_ADAPTER_CLEAR 0xBE -#define I2O_CMD_ADAPTER_CONNECT 0xC9 -#define I2O_CMD_ADAPTER_RESET 0xBD -#define I2O_CMD_LCT_NOTIFY 0xA2 -#define I2O_CMD_OUTBOUND_INIT 0xA1 -#define I2O_CMD_PATH_ENABLE 0xD3 -#define I2O_CMD_PATH_QUIESCE 0xC5 -#define I2O_CMD_PATH_RESET 0xD7 -#define I2O_CMD_STATIC_MF_CREATE 0xDD -#define I2O_CMD_STATIC_MF_RELEASE 0xDF -#define I2O_CMD_STATUS_GET 0xA0 -#define I2O_CMD_SW_DOWNLOAD 0xA9 -#define I2O_CMD_SW_UPLOAD 0xAB -#define I2O_CMD_SW_REMOVE 0xAD -#define I2O_CMD_SYS_ENABLE 0xD1 -#define I2O_CMD_SYS_MODIFY 0xC1 -#define I2O_CMD_SYS_QUIESCE 0xC3 -#define I2O_CMD_SYS_TAB_SET 0xA3 - -/* - * Utility Class - */ -#define I2O_CMD_UTIL_NOP 0x00 -#define I2O_CMD_UTIL_ABORT 0x01 -#define I2O_CMD_UTIL_CLAIM 0x09 -#define I2O_CMD_UTIL_RELEASE 0x0B -#define I2O_CMD_UTIL_PARAMS_GET 0x06 -#define I2O_CMD_UTIL_PARAMS_SET 0x05 -#define I2O_CMD_UTIL_EVT_REGISTER 0x13 -#define I2O_CMD_UTIL_EVT_ACK 0x14 -#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10 -#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D -#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F -#define I2O_CMD_UTIL_LOCK 0x17 -#define I2O_CMD_UTIL_LOCK_RELEASE 0x19 -#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15 - -/* - * SCSI Host Bus Adapter Class - */ -#define I2O_CMD_SCSI_EXEC 0x81 -#define I2O_CMD_SCSI_ABORT 0x83 -#define I2O_CMD_SCSI_BUSRESET 0x27 - -/* - * Bus Adapter Class - */ -#define I2O_CMD_BUS_ADAPTER_RESET 0x85 -#define I2O_CMD_BUS_RESET 0x87 -#define I2O_CMD_BUS_SCAN 0x89 -#define I2O_CMD_BUS_QUIESCE 0x8b - -/* - * Random Block Storage Class - */ -#define I2O_CMD_BLOCK_READ 0x30 -#define I2O_CMD_BLOCK_WRITE 0x31 -#define I2O_CMD_BLOCK_CFLUSH 0x37 -#define I2O_CMD_BLOCK_MLOCK 0x49 -#define I2O_CMD_BLOCK_MUNLOCK 0x4B -#define I2O_CMD_BLOCK_MMOUNT 0x41 -#define I2O_CMD_BLOCK_MEJECT 0x43 -#define I2O_CMD_BLOCK_POWER 0x70 - -#define I2O_CMD_PRIVATE 0xFF - -/* Command status values */ - -#define I2O_CMD_IN_PROGRESS 0x01 -#define I2O_CMD_REJECTED 0x02 -#define I2O_CMD_FAILED 0x03 -#define I2O_CMD_COMPLETED 0x04 - -/* I2O API function return values */ - -#define I2O_RTN_NO_ERROR 0 -#define I2O_RTN_NOT_INIT 1 -#define I2O_RTN_FREE_Q_EMPTY 2 -#define I2O_RTN_TCB_ERROR 3 -#define I2O_RTN_TRANSACTION_ERROR 4 -#define I2O_RTN_ADAPTER_ALREADY_INIT 5 -#define I2O_RTN_MALLOC_ERROR 6 -#define I2O_RTN_ADPTR_NOT_REGISTERED 7 -#define I2O_RTN_MSG_REPLY_TIMEOUT 8 -#define I2O_RTN_NO_STATUS 9 -#define I2O_RTN_NO_FIRM_VER 10 -#define I2O_RTN_NO_LINK_SPEED 11 - -/* Reply message status defines for all messages */ - -#define I2O_REPLY_STATUS_SUCCESS 0x00 -#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01 -#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02 -#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03 -#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04 -#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05 -#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06 -#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08 -#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09 -#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A -#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B -#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80 - -/* Status codes and Error Information for Parameter functions */ - -#define I2O_PARAMS_STATUS_SUCCESS 0x00 -#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01 -#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02 -#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03 -#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04 -#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05 -#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06 -#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07 -#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08 -#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09 -#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A -#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B -#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C -#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D -#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E -#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F -#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10 - -/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error - * messages: Table 3-2 Detailed Status Codes.*/ - -#define I2O_DSC_SUCCESS 0x0000 -#define I2O_DSC_BAD_KEY 0x0002 -#define I2O_DSC_TCL_ERROR 0x0003 -#define I2O_DSC_REPLY_BUFFER_FULL 0x0004 -#define I2O_DSC_NO_SUCH_PAGE 0x0005 -#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006 -#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007 -#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009 -#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A -#define I2O_DSC_DEVICE_LOCKED 0x000B -#define I2O_DSC_DEVICE_RESET 0x000C -#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D -#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E -#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F -#define I2O_DSC_INVALID_OFFSET 0x0010 -#define I2O_DSC_INVALID_PARAMETER 0x0011 -#define I2O_DSC_INVALID_REQUEST 0x0012 -#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013 -#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014 -#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015 -#define I2O_DSC_MISSING_PARAMETER 0x0016 -#define I2O_DSC_TIMEOUT 0x0017 -#define I2O_DSC_UNKNOWN_ERROR 0x0018 -#define I2O_DSC_UNKNOWN_FUNCTION 0x0019 -#define I2O_DSC_UNSUPPORTED_VERSION 0x001A -#define I2O_DSC_DEVICE_BUSY 0x001B -#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C - -/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed - Status Codes.*/ - -#define I2O_BSA_DSC_SUCCESS 0x0000 -#define I2O_BSA_DSC_MEDIA_ERROR 0x0001 -#define I2O_BSA_DSC_ACCESS_ERROR 0x0002 -#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003 -#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004 -#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005 -#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006 -#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007 -#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008 -#define I2O_BSA_DSC_BUS_FAILURE 0x0009 -#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A -#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B -#define I2O_BSA_DSC_DEVICE_RESET 0x000C -#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D -#define I2O_BSA_DSC_TIMEOUT 0x000E - -/* FailureStatusCodes, Table 3-3 Message Failure Codes */ - -#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81 -#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82 -#define I2O_FSC_TRANSPORT_CONGESTION 0x83 -#define I2O_FSC_TRANSPORT_FAILURE 0x84 -#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85 -#define I2O_FSC_TRANSPORT_TIME_OUT 0x86 -#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87 -#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88 -#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89 -#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A -#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B -#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C -#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F -#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF - -/* Device Claim Types */ -#define I2O_CLAIM_PRIMARY 0x01000000 -#define I2O_CLAIM_MANAGEMENT 0x02000000 -#define I2O_CLAIM_AUTHORIZED 0x03000000 -#define I2O_CLAIM_SECONDARY 0x04000000 - -/* Message header defines for VersionOffset */ -#define I2OVER15 0x0001 -#define I2OVER20 0x0002 - -/* Default is 1.5 */ -#define I2OVERSION I2OVER15 - -#define SGL_OFFSET_0 I2OVERSION -#define SGL_OFFSET_4 (0x0040 | I2OVERSION) -#define SGL_OFFSET_5 (0x0050 | I2OVERSION) -#define SGL_OFFSET_6 (0x0060 | I2OVERSION) -#define SGL_OFFSET_7 (0x0070 | I2OVERSION) -#define SGL_OFFSET_8 (0x0080 | I2OVERSION) -#define SGL_OFFSET_9 (0x0090 | I2OVERSION) -#define SGL_OFFSET_10 (0x00A0 | I2OVERSION) -#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) -#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) -#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) - -/* Transaction Reply Lists (TRL) Control Word structure */ -#define TRL_SINGLE_FIXED_LENGTH 0x00 -#define TRL_SINGLE_VARIABLE_LENGTH 0x40 -#define TRL_MULTIPLE_FIXED_LENGTH 0x80 - - /* msg header defines for MsgFlags */ -#define MSG_STATIC 0x0100 -#define MSG_64BIT_CNTXT 0x0200 -#define MSG_MULTI_TRANS 0x1000 -#define MSG_FAIL 0x2000 -#define MSG_FINAL 0x4000 -#define MSG_REPLY 0x8000 - - /* minimum size msg */ -#define THREE_WORD_MSG_SIZE 0x00030000 -#define FOUR_WORD_MSG_SIZE 0x00040000 -#define FIVE_WORD_MSG_SIZE 0x00050000 -#define SIX_WORD_MSG_SIZE 0x00060000 -#define SEVEN_WORD_MSG_SIZE 0x00070000 -#define EIGHT_WORD_MSG_SIZE 0x00080000 -#define NINE_WORD_MSG_SIZE 0x00090000 -#define TEN_WORD_MSG_SIZE 0x000A0000 -#define ELEVEN_WORD_MSG_SIZE 0x000B0000 -#define I2O_MESSAGE_SIZE(x) ((x)<<16) - -/* special TID assignments */ -#define ADAPTER_TID 0 -#define HOST_TID 1 - -/* outbound queue defines */ -#define I2O_MAX_OUTBOUND_MSG_FRAMES 128 -#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ - -#define I2O_POST_WAIT_OK 0 -#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT - -#define I2O_CONTEXT_LIST_MIN_LENGTH 15 -#define I2O_CONTEXT_LIST_USED 0x01 -#define I2O_CONTEXT_LIST_DELETED 0x02 - -/* timeouts */ -#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15 -#define I2O_TIMEOUT_MESSAGE_GET 5 -#define I2O_TIMEOUT_RESET 30 -#define I2O_TIMEOUT_STATUS_GET 5 -#define I2O_TIMEOUT_LCT_GET 360 -#define I2O_TIMEOUT_SCSI_SCB_ABORT 240 - -/* retries */ -#define I2O_HRT_GET_TRIES 3 -#define I2O_LCT_GET_TRIES 3 - -/* defines for max_sectors and max_phys_segments */ -#define I2O_MAX_SECTORS 1024 -#define I2O_MAX_SECTORS_LIMITED 256 -#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS - #endif /* __KERNEL__ */ #endif /* _I2O_H */ |
