diff options
Diffstat (limited to 'include/linux/i2o.h')
| -rw-r--r-- | include/linux/i2o.h | 497 |
1 files changed, 310 insertions, 187 deletions
diff --git a/include/linux/i2o.h b/include/linux/i2o.h index ea9a3ad..bdc286e 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -119,12 +119,21 @@ struct i2o_driver { }; /* - * Contains all information which are necessary for DMA operations + * Contains DMA mapped address information */ struct i2o_dma { void *virt; dma_addr_t phys; - u32 len; + size_t len; +}; + +/* + * Contains IO mapped address information + */ +struct i2o_io { + void __iomem *virt; + unsigned long phys; + unsigned long len; }; /* @@ -147,28 +156,25 @@ struct i2o_controller { struct pci_dev *pdev; /* PCI device */ - unsigned int short_req:1; /* use small block sizes */ + unsigned int promise:1; /* Promise controller */ + unsigned int adaptec:1; /* DPT / Adaptec controller */ + unsigned int raptor:1; /* split bar */ unsigned int no_quiesce:1; /* dont quiesce before reset */ - unsigned int raptor:1; /* split bar */ - unsigned int promise:1; /* Promise controller */ - -#ifdef CONFIG_MTRR - int mtrr_reg0; - int mtrr_reg1; -#endif + unsigned int short_req:1; /* use small block sizes */ + unsigned int limit_sectors:1; /* limit number of sectors / request */ + unsigned int pae_support:1; /* controller has 64-bit SGL support */ struct list_head devices; /* list of I2O devices */ - - struct notifier_block *event_notifer; /* Events */ - atomic_t users; struct list_head list; /* Controller list */ - void __iomem *post_port; /* Inbout port address */ - void __iomem *reply_port; /* Outbound port address */ - void __iomem *irq_mask; /* Interrupt register address */ + + void __iomem *in_port; /* Inbout port address */ + void __iomem *out_port; /* Outbound port address */ + void __iomem *irq_status; /* Interrupt status register address */ + void __iomem *irq_mask; /* Interrupt mask register address */ /* Dynamic LCT related data */ - struct i2o_dma status; /* status of IOP */ + struct i2o_dma status; /* IOP status block */ struct i2o_dma hrt; /* HW Resource Table */ i2o_lct *lct; /* Logical Config Table */ @@ -176,21 +182,19 @@ struct i2o_controller { struct semaphore lct_lock; /* Lock for LCT updates */ struct i2o_dma status_block; /* IOP status block */ - struct i2o_dma base; /* controller messaging unit */ - struct i2o_dma in_queue; /* inbound message queue Host->IOP */ + struct i2o_io base; /* controller messaging unit */ + struct i2o_io in_queue; /* inbound message queue Host->IOP */ struct i2o_dma out_queue; /* outbound message queue IOP->Host */ - unsigned int battery:1; /* Has a battery backup */ + unsigned int battery:1; /* Has a battery backup */ unsigned int io_alloc:1; /* An I/O resource was allocated */ unsigned int mem_alloc:1; /* A memory resource was allocated */ struct resource io_resource; /* I/O resource allocated to the IOP */ struct resource mem_resource; /* Mem resource allocated to the IOP */ - struct proc_dir_entry *proc_entry; /* /proc dir */ - - struct list_head bus_list; /* list of busses on IOP */ struct device device; + struct class_device classdev; /* I2O controller class */ struct i2o_device *exec; /* Executive */ #if BITS_PER_LONG == 64 spinlock_t context_list_lock; /* lock for context_list */ @@ -241,9 +245,10 @@ struct i2o_sys_tbl { extern struct list_head i2o_controllers; /* Message functions */ -static inline u32 i2o_msg_get(struct i2o_controller *, struct i2o_message __iomem **); -extern u32 i2o_msg_get_wait(struct i2o_controller *, struct i2o_message __iomem **, - int); +static inline u32 i2o_msg_get(struct i2o_controller *, + struct i2o_message __iomem **); +extern u32 i2o_msg_get_wait(struct i2o_controller *, + struct i2o_message __iomem **, int); static inline void i2o_msg_post(struct i2o_controller *, u32); static inline int i2o_msg_post_wait(struct i2o_controller *, u32, unsigned long); @@ -252,15 +257,6 @@ extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long, extern void i2o_msg_nop(struct i2o_controller *, u32); static inline void i2o_flush_reply(struct i2o_controller *, u32); -/* DMA handling functions */ -static inline int i2o_dma_alloc(struct device *, struct i2o_dma *, size_t, - unsigned int); -static inline void i2o_dma_free(struct device *, struct i2o_dma *); -int i2o_dma_realloc(struct device *, struct i2o_dma *, size_t, unsigned int); - -static inline int i2o_dma_map(struct device *, struct i2o_dma *); -static inline void i2o_dma_unmap(struct device *, struct i2o_dma *); - /* IOP functions */ extern int i2o_status_get(struct i2o_controller *); @@ -285,6 +281,16 @@ static inline u32 i2o_ptr_high(void *ptr) { return (u32) ((u64) ptr >> 32); }; + +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) (u64) dma_addr; +}; + +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ + return (u32) ((u64) dma_addr >> 32); +}; #else static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr) { @@ -315,8 +321,246 @@ static inline u32 i2o_ptr_high(void *ptr) { return 0; }; + +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) dma_addr; +}; + +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ + return 0; +}; #endif +/** + * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL + * @c: I2O controller for which the calculation should be done + * @body_size: maximum body size used for message in 32-bit words. + * + * Return the maximum number of SG elements in a SG list. + */ +static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) +{ + i2o_status_block *sb = c->status_block.virt; + u16 sg_count = + (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) - + body_size; + + if (c->pae_support) { + /* + * for 64-bit a SG attribute element must be added and each + * SG element needs 12 bytes instead of 8. + */ + sg_count -= 2; + sg_count /= 3; + } else + sg_count /= 2; + + if (c->short_req && (sg_count > 8)) + sg_count = 8; + + return sg_count; +}; + +/** + * i2o_dma_map_single - Map pointer to controller and fill in I2O message. + * @c: I2O controller + * @ptr: pointer to the data which should be mapped + * @size: size of data in bytes + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_single(). The pointer sg_ptr will only be set to the end of the + * SG list if the allocation was successful. + * + * Returns DMA address which must be checked for failures using + * dma_mapping_error(). + */ +static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, + size_t size, + enum dma_data_direction direction, + u32 __iomem ** sg_ptr) +{ + u32 sg_flags; + u32 __iomem *mptr = *sg_ptr; + dma_addr_t dma_addr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0xd4000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0xd0000000; + break; + default: + return 0; + } + + dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction); + if (!dma_mapping_error(dma_addr)) { +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + writel(0x7C020002, mptr++); + writel(PAGE_SIZE, mptr++); + } +#endif + + writel(sg_flags | size, mptr++); + writel(i2o_dma_low(dma_addr), mptr++); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + writel(i2o_dma_high(dma_addr), mptr++); +#endif + *sg_ptr = mptr; + } + return dma_addr; +}; + +/** + * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message. + * @c: I2O controller + * @sg: SG list to be mapped + * @sg_count: number of elements in the SG list + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG + * list if the allocation was successful. + * + * Returns 0 on failure or 1 on success. + */ +static inline int i2o_dma_map_sg(struct i2o_controller *c, + struct scatterlist *sg, int sg_count, + enum dma_data_direction direction, + u32 __iomem ** sg_ptr) +{ + u32 sg_flags; + u32 __iomem *mptr = *sg_ptr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0x14000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0x10000000; + break; + default: + return 0; + } + + sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction); + if (!sg_count) + return 0; + +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + writel(0x7C020002, mptr++); + writel(PAGE_SIZE, mptr++); + } +#endif + + while (sg_count-- > 0) { + if (!sg_count) + sg_flags |= 0xC0000000; + writel(sg_flags | sg_dma_len(sg), mptr++); + writel(i2o_dma_low(sg_dma_address(sg)), mptr++); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + writel(i2o_dma_high(sg_dma_address(sg)), mptr++); +#endif + sg++; + } + *sg_ptr = mptr; + + return 1; +}; + +/** + * i2o_dma_alloc - Allocate DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which should get the DMA buffer + * @len: length of the new DMA memory + * @gfp_mask: GFP mask + * + * Allocate a coherent DMA memory and write the pointers into addr. + * + * Returns 0 on success or -ENOMEM on failure. + */ +static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, + size_t len, unsigned int gfp_mask) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int dma_64 = 0; + + if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) { + dma_64 = 1; + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) + return -ENOMEM; + } + + addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); + + if ((sizeof(dma_addr_t) > 4) && dma_64) + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); + + if (!addr->virt) + return -ENOMEM; + + memset(addr->virt, 0, len); + addr->len = len; + + return 0; +}; + +/** + * i2o_dma_free - Free DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which contains the DMA buffer + * + * Free a coherent DMA memory and set virtual address of addr to NULL. + */ +static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) +{ + if (addr->virt) { + if (addr->phys) + dma_free_coherent(dev, addr->len, addr->virt, + addr->phys); + else + kfree(addr->virt); + addr->virt = NULL; + } +}; + +/** + * i2o_dma_realloc - Realloc DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: pointer to a i2o_dma struct DMA buffer + * @len: new length of memory + * @gfp_mask: GFP mask + * + * If there was something allocated in the addr, free it first. If len > 0 + * than try to allocate it and write the addresses back to the addr + * structure. If len == 0 set the virtual address to NULL. + * + * Returns the 0 on success or negative error code on failure. + */ +static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, + size_t len, unsigned int gfp_mask) +{ + i2o_dma_free(dev, addr); + + if (len) + return i2o_dma_alloc(dev, addr, len, gfp_mask); + + return 0; +}; + /* I2O driver (OSM) functions */ extern int i2o_driver_register(struct i2o_driver *); extern void i2o_driver_unregister(struct i2o_driver *); @@ -385,49 +629,11 @@ extern int i2o_device_claim_release(struct i2o_device *); /* Exec OSM functions */ extern int i2o_exec_lct_get(struct i2o_controller *); -/* device to i2o_device and driver to i2o_driver convertion functions */ +/* device / driver / kobject conversion functions */ #define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver) #define to_i2o_device(dev) container_of(dev, struct i2o_device, device) - -/* - * Messenger inlines - */ -static inline u32 I2O_POST_READ32(struct i2o_controller *c) -{ - rmb(); - return readl(c->post_port); -}; - -static inline void I2O_POST_WRITE32(struct i2o_controller *c, u32 val) -{ - wmb(); - writel(val, c->post_port); -}; - -static inline u32 I2O_REPLY_READ32(struct i2o_controller *c) -{ - rmb(); - return readl(c->reply_port); -}; - -static inline void I2O_REPLY_WRITE32(struct i2o_controller *c, u32 val) -{ - wmb(); - writel(val, c->reply_port); -}; - -static inline u32 I2O_IRQ_READ32(struct i2o_controller *c) -{ - rmb(); - return readl(c->irq_mask); -}; - -static inline void I2O_IRQ_WRITE32(struct i2o_controller *c, u32 val) -{ - wmb(); - writel(val, c->irq_mask); - wmb(); -}; +#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device) +#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj)) /** * i2o_msg_get - obtain an I2O message from the IOP @@ -443,11 +649,11 @@ static inline void I2O_IRQ_WRITE32(struct i2o_controller *c, u32 val) * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. */ static inline u32 i2o_msg_get(struct i2o_controller *c, - struct i2o_message __iomem **msg) + struct i2o_message __iomem ** msg) { - u32 m; + u32 m = readl(c->in_port); - if ((m = I2O_POST_READ32(c)) != I2O_QUEUE_EMPTY) + if (m != I2O_QUEUE_EMPTY) *msg = c->in_queue.virt + m; return m; @@ -462,7 +668,7 @@ static inline u32 i2o_msg_get(struct i2o_controller *c, */ static inline void i2o_msg_post(struct i2o_controller *c, u32 m) { - I2O_POST_WRITE32(c, m); + writel(m, c->in_port); }; /** @@ -491,12 +697,10 @@ static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m, * The I2O controller must be informed that the reply message is not needed * anymore. If you forget to flush the reply, the message frame can't be * used by the controller anymore and is therefore lost. - * - * FIXME: is there a timeout after which the controller reuse the message? */ static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) { - I2O_REPLY_WRITE32(c, m); + writel(m, c->out_port); }; /** @@ -530,97 +734,13 @@ static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c, * work for receive side messages as they are kmalloc objects * in a different pool. */ -static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controller *c, - u32 m) +static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct + i2o_controller *c, + u32 m) { return c->in_queue.virt + m; }; -/** - * i2o_dma_alloc - Allocate DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should get the DMA buffer - * @len: length of the new DMA memory - * @gfp_mask: GFP mask - * - * Allocate a coherent DMA memory and write the pointers into addr. - * - * Returns 0 on success or -ENOMEM on failure. - */ -static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, - size_t len, unsigned int gfp_mask) -{ - addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); - if (!addr->virt) - return -ENOMEM; - - memset(addr->virt, 0, len); - addr->len = len; - - return 0; -}; - -/** - * i2o_dma_free - Free DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which contains the DMA buffer - * - * Free a coherent DMA memory and set virtual address of addr to NULL. - */ -static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) -{ - if (addr->virt) { - if (addr->phys) - dma_free_coherent(dev, addr->len, addr->virt, - addr->phys); - else - kfree(addr->virt); - addr->virt = NULL; - } -}; - -/** - * i2o_dma_map - Map the memory to DMA - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be mapped - * - * Map the memory in addr->virt to coherent DMA memory and write the - * physical address into addr->phys. - * - * Returns 0 on success or -ENOMEM on failure. - */ -static inline int i2o_dma_map(struct device *dev, struct i2o_dma *addr) -{ - if (!addr->virt) - return -EFAULT; - - if (!addr->phys) - addr->phys = dma_map_single(dev, addr->virt, addr->len, - DMA_BIDIRECTIONAL); - if (!addr->phys) - return -ENOMEM; - - return 0; -}; - -/** - * i2o_dma_unmap - Unmap the DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be unmapped - * - * Unmap the memory in addr->virt from DMA memory. - */ -static inline void i2o_dma_unmap(struct device *dev, struct i2o_dma *addr) -{ - if (!addr->virt) - return; - - if (addr->phys) { - dma_unmap_single(dev, addr->phys, addr->len, DMA_BIDIRECTIONAL); - addr->phys = 0; - } -}; - /* * Endian handling wrapped into the macro - keeps the core code * cleaner. @@ -773,6 +893,14 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_CMD_SCSI_BUSRESET 0x27 /* + * Bus Adapter Class + */ +#define I2O_CMD_BUS_ADAPTER_RESET 0x85 +#define I2O_CMD_BUS_RESET 0x87 +#define I2O_CMD_BUS_SCAN 0x89 +#define I2O_CMD_BUS_QUIESCE 0x8b + +/* * Random Block Storage Class */ #define I2O_CMD_BLOCK_READ 0x30 @@ -784,7 +912,7 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_CMD_BLOCK_MEJECT 0x43 #define I2O_CMD_BLOCK_POWER 0x70 -#define I2O_PRIVATE_MSG 0xFF +#define I2O_CMD_PRIVATE 0xFF /* Command status values */ @@ -922,7 +1050,7 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2OVER15 0x0001 #define I2OVER20 0x0002 -/* Default is 1.5, FIXME: Need support for both 1.5 and 2.0 */ +/* Default is 1.5 */ #define I2OVERSION I2OVER15 #define SGL_OFFSET_0 I2OVERSION @@ -933,9 +1061,9 @@ extern void i2o_debug_state(struct i2o_controller *c); #define SGL_OFFSET_8 (0x0080 | I2OVERSION) #define SGL_OFFSET_9 (0x0090 | I2OVERSION) #define SGL_OFFSET_10 (0x00A0 | I2OVERSION) - -#define TRL_OFFSET_5 (0x0050 | I2OVERSION) -#define TRL_OFFSET_6 (0x0060 | I2OVERSION) +#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) +#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) +#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) /* Transaction Reply Lists (TRL) Control Word structure */ #define TRL_SINGLE_FIXED_LENGTH 0x00 @@ -962,17 +1090,13 @@ extern void i2o_debug_state(struct i2o_controller *c); #define ELEVEN_WORD_MSG_SIZE 0x000B0000 #define I2O_MESSAGE_SIZE(x) ((x)<<16) -/* Special TID Assignments */ - +/* special TID assignments */ #define ADAPTER_TID 0 #define HOST_TID 1 -#define MSG_FRAME_SIZE 128 /* i2o_scsi assumes >= 32 */ -#define REPLY_FRAME_SIZE 17 -#define SG_TABLESIZE 30 -#define NMBR_MSG_FRAMES 128 - -#define MSG_POOL_SIZE (MSG_FRAME_SIZE*NMBR_MSG_FRAMES*sizeof(u32)) +/* outbound queue defines */ +#define I2O_MAX_OUTBOUND_MSG_FRAMES 128 +#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ #define I2O_POST_WAIT_OK 0 #define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT @@ -993,11 +1117,10 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_HRT_GET_TRIES 3 #define I2O_LCT_GET_TRIES 3 -/* request queue sizes */ +/* defines for max_sectors and max_phys_segments */ #define I2O_MAX_SECTORS 1024 -#define I2O_MAX_SEGMENTS 128 - -#define I2O_REQ_MEMPOOL_SIZE 32 +#define I2O_MAX_SECTORS_LIMITED 256 +#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS #endif /* __KERNEL__ */ #endif /* _I2O_H */ |
