diff options
Diffstat (limited to 'include/linux/i2c/twl.h')
-rw-r--r-- | include/linux/i2c/twl.h | 673 |
1 files changed, 673 insertions, 0 deletions
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h new file mode 100644 index 0000000..bf1c5be --- /dev/null +++ b/include/linux/i2c/twl.h @@ -0,0 +1,673 @@ +/* + * twl4030.h - header for TWL4030 PM and audio CODEC device + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __TWL_H_ +#define __TWL_H_ + +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + +/* + * Using the twl4030 core we address registers using a pair + * { module id, relative register offset } + * which that core then maps to the relevant + * { i2c slave, absolute register address } + * + * The module IDs are meaningful only to the twl4030 core code, + * which uses them as array indices to look up the first register + * address each module uses within a given i2c slave. + */ + +/* Slave 0 (i2c address 0x48) */ +#define TWL4030_MODULE_USB 0x00 + +/* Slave 1 (i2c address 0x49) */ +#define TWL4030_MODULE_AUDIO_VOICE 0x01 +#define TWL4030_MODULE_GPIO 0x02 +#define TWL4030_MODULE_INTBR 0x03 +#define TWL4030_MODULE_PIH 0x04 +#define TWL4030_MODULE_TEST 0x05 + +/* Slave 2 (i2c address 0x4a) */ +#define TWL4030_MODULE_KEYPAD 0x06 +#define TWL4030_MODULE_MADC 0x07 +#define TWL4030_MODULE_INTERRUPTS 0x08 +#define TWL4030_MODULE_LED 0x09 +#define TWL4030_MODULE_MAIN_CHARGE 0x0A +#define TWL4030_MODULE_PRECHARGE 0x0B +#define TWL4030_MODULE_PWM0 0x0C +#define TWL4030_MODULE_PWM1 0x0D +#define TWL4030_MODULE_PWMA 0x0E +#define TWL4030_MODULE_PWMB 0x0F + +#define TWL5031_MODULE_ACCESSORY 0x10 +#define TWL5031_MODULE_INTERRUPTS 0x11 + +/* Slave 3 (i2c address 0x4b) */ +#define TWL4030_MODULE_BACKUP 0x12 +#define TWL4030_MODULE_INT 0x13 +#define TWL4030_MODULE_PM_MASTER 0x14 +#define TWL4030_MODULE_PM_RECEIVER 0x15 +#define TWL4030_MODULE_RTC 0x16 +#define TWL4030_MODULE_SECURED_REG 0x17 + +#define TWL_MODULE_USB TWL4030_MODULE_USB +#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE +#define TWL_MODULE_PIH TWL4030_MODULE_PIH +#define TWL_MODULE_MADC TWL4030_MODULE_MADC +#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE +#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER +#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER +#define TWL_MODULE_RTC TWL4030_MODULE_RTC + +#define GPIO_INTR_OFFSET 0 +#define KEYPAD_INTR_OFFSET 1 +#define BCI_INTR_OFFSET 2 +#define MADC_INTR_OFFSET 3 +#define USB_INTR_OFFSET 4 +#define BCI_PRES_INTR_OFFSET 9 +#define USB_PRES_INTR_OFFSET 10 +#define RTC_INTR_OFFSET 11 + +/* + * Offset from TWL6030_IRQ_BASE / pdata->irq_base + */ +#define PWR_INTR_OFFSET 0 +#define HOTDIE_INTR_OFFSET 12 +#define SMPSLDO_INTR_OFFSET 13 +#define BATDETECT_INTR_OFFSET 14 +#define SIMDETECT_INTR_OFFSET 15 +#define MMCDETECT_INTR_OFFSET 16 +#define GASGAUGE_INTR_OFFSET 17 +#define USBOTG_INTR_OFFSET 4 +#define CHARGER_INTR_OFFSET 2 +#define RSV_INTR_OFFSET 0 + +/* INT register offsets */ +#define REG_INT_STS_A 0x00 +#define REG_INT_STS_B 0x01 +#define REG_INT_STS_C 0x02 + +#define REG_INT_MSK_LINE_A 0x03 +#define REG_INT_MSK_LINE_B 0x04 +#define REG_INT_MSK_LINE_C 0x05 + +#define REG_INT_MSK_STS_A 0x06 +#define REG_INT_MSK_STS_B 0x07 +#define REG_INT_MSK_STS_C 0x08 + +/* MASK INT REG GROUP A */ +#define TWL6030_PWR_INT_MASK 0x07 +#define TWL6030_RTC_INT_MASK 0x18 +#define TWL6030_HOTDIE_INT_MASK 0x20 +#define TWL6030_SMPSLDOA_INT_MASK 0xC0 + +/* MASK INT REG GROUP B */ +#define TWL6030_SMPSLDOB_INT_MASK 0x01 +#define TWL6030_BATDETECT_INT_MASK 0x02 +#define TWL6030_SIMDETECT_INT_MASK 0x04 +#define TWL6030_MMCDETECT_INT_MASK 0x08 +#define TWL6030_GPADC_INT_MASK 0x60 +#define TWL6030_GASGAUGE_INT_MASK 0x80 + +/* MASK INT REG GROUP C */ +#define TWL6030_USBOTG_INT_MASK 0x0F +#define TWL6030_CHARGER_CTRL_INT_MASK 0x10 +#define TWL6030_CHARGER_FAULT_INT_MASK 0x60 + + +#define TWL4030_CLASS_ID 0x4030 +#define TWL6030_CLASS_ID 0x6030 +unsigned int twl_rev(void); +#define GET_TWL_REV (twl_rev()) +#define TWL_CLASS_IS(class, id) \ +static inline int twl_class_is_ ##class(void) \ +{ \ + return ((id) == (GET_TWL_REV)) ? 1 : 0; \ +} + +TWL_CLASS_IS(4030, TWL4030_CLASS_ID) +TWL_CLASS_IS(6030, TWL6030_CLASS_ID) + +/* + * Read and write single 8-bit registers + */ +int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); +int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); + +/* + * Read and write several 8-bit registers at once. + * + * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 + * for the value, and populate your data starting at offset 1. + */ +int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); + +int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); +int twl6030_interrupt_mask(u8 bit_mask, u8 offset); + +/*----------------------------------------------------------------------*/ + +/* + * NOTE: at up to 1024 registers, this is a big chip. + * + * Avoid putting register declarations in this file, instead of into + * a driver-private file, unless some of the registers in a block + * need to be shared with other drivers. One example is blocks that + * have Secondary IRQ Handler (SIH) registers. + */ + +#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) +#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) +#define TWL4030_SIH_CTRL_COR_MASK BIT(2) + +/*----------------------------------------------------------------------*/ + +/* + * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) + */ + +#define REG_GPIODATAIN1 0x0 +#define REG_GPIODATAIN2 0x1 +#define REG_GPIODATAIN3 0x2 +#define REG_GPIODATADIR1 0x3 +#define REG_GPIODATADIR2 0x4 +#define REG_GPIODATADIR3 0x5 +#define REG_GPIODATAOUT1 0x6 +#define REG_GPIODATAOUT2 0x7 +#define REG_GPIODATAOUT3 0x8 +#define REG_CLEARGPIODATAOUT1 0x9 +#define REG_CLEARGPIODATAOUT2 0xA +#define REG_CLEARGPIODATAOUT3 0xB +#define REG_SETGPIODATAOUT1 0xC +#define REG_SETGPIODATAOUT2 0xD +#define REG_SETGPIODATAOUT3 0xE +#define REG_GPIO_DEBEN1 0xF +#define REG_GPIO_DEBEN2 0x10 +#define REG_GPIO_DEBEN3 0x11 +#define REG_GPIO_CTRL 0x12 +#define REG_GPIOPUPDCTR1 0x13 +#define REG_GPIOPUPDCTR2 0x14 +#define REG_GPIOPUPDCTR3 0x15 +#define REG_GPIOPUPDCTR4 0x16 +#define REG_GPIOPUPDCTR5 0x17 +#define REG_GPIO_ISR1A 0x19 +#define REG_GPIO_ISR2A 0x1A +#define REG_GPIO_ISR3A 0x1B +#define REG_GPIO_IMR1A 0x1C +#define REG_GPIO_IMR2A 0x1D +#define REG_GPIO_IMR3A 0x1E +#define REG_GPIO_ISR1B 0x1F +#define REG_GPIO_ISR2B 0x20 +#define REG_GPIO_ISR3B 0x21 +#define REG_GPIO_IMR1B 0x22 +#define REG_GPIO_IMR2B 0x23 +#define REG_GPIO_IMR3B 0x24 +#define REG_GPIO_EDR1 0x28 +#define REG_GPIO_EDR2 0x29 +#define REG_GPIO_EDR3 0x2A +#define REG_GPIO_EDR4 0x2B +#define REG_GPIO_EDR5 0x2C +#define REG_GPIO_SIH_CTRL 0x2D + +/* Up to 18 signals are available as GPIOs, when their + * pins are not assigned to another use (such as ULPI/USB). + */ +#define TWL4030_GPIO_MAX 18 + +/*----------------------------------------------------------------------*/ + +/* + * Keypad register offsets (use TWL4030_MODULE_KEYPAD) + * ... SIH/interrupt only + */ + +#define TWL4030_KEYPAD_KEYP_ISR1 0x11 +#define TWL4030_KEYPAD_KEYP_IMR1 0x12 +#define TWL4030_KEYPAD_KEYP_ISR2 0x13 +#define TWL4030_KEYPAD_KEYP_IMR2 0x14 +#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ +#define TWL4030_KEYPAD_KEYP_EDR 0x16 +#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 + +/*----------------------------------------------------------------------*/ + +/* + * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) + * ... SIH/interrupt only + */ + +#define TWL4030_MADC_ISR1 0x61 +#define TWL4030_MADC_IMR1 0x62 +#define TWL4030_MADC_ISR2 0x63 +#define TWL4030_MADC_IMR2 0x64 +#define TWL4030_MADC_SIR 0x65 /* test register */ +#define TWL4030_MADC_EDR 0x66 +#define TWL4030_MADC_SIH_CTRL 0x67 + +/*----------------------------------------------------------------------*/ + +/* + * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) + */ + +#define TWL4030_INTERRUPTS_BCIISR1A 0x0 +#define TWL4030_INTERRUPTS_BCIISR2A 0x1 +#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 +#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 +#define TWL4030_INTERRUPTS_BCIISR1B 0x4 +#define TWL4030_INTERRUPTS_BCIISR2B 0x5 +#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 +#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 +#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ +#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ +#define TWL4030_INTERRUPTS_BCIEDR1 0xa +#define TWL4030_INTERRUPTS_BCIEDR2 0xb +#define TWL4030_INTERRUPTS_BCIEDR3 0xc +#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd + +/*----------------------------------------------------------------------*/ + +/* + * Power Interrupt block register offsets (use TWL4030_MODULE_INT) + */ + +#define TWL4030_INT_PWR_ISR1 0x0 +#define TWL4030_INT_PWR_IMR1 0x1 +#define TWL4030_INT_PWR_ISR2 0x2 +#define TWL4030_INT_PWR_IMR2 0x3 +#define TWL4030_INT_PWR_SIR 0x4 /* test register */ +#define TWL4030_INT_PWR_EDR1 0x5 +#define TWL4030_INT_PWR_EDR2 0x6 +#define TWL4030_INT_PWR_SIH_CTRL 0x7 + +/*----------------------------------------------------------------------*/ + +/* + * Accessory Interrupts + */ +#define TWL5031_ACIIMR_LSB 0x05 +#define TWL5031_ACIIMR_MSB 0x06 +#define TWL5031_ACIIDR_LSB 0x07 +#define TWL5031_ACIIDR_MSB 0x08 +#define TWL5031_ACCISR1 0x0F +#define TWL5031_ACCIMR1 0x10 +#define TWL5031_ACCISR2 0x11 +#define TWL5031_ACCIMR2 0x12 +#define TWL5031_ACCSIR 0x13 +#define TWL5031_ACCEDR1 0x14 +#define TWL5031_ACCSIHCTRL 0x15 + +/*----------------------------------------------------------------------*/ + +/* + * Battery Charger Controller + */ + +#define TWL5031_INTERRUPTS_BCIISR1 0x0 +#define TWL5031_INTERRUPTS_BCIIMR1 0x1 +#define TWL5031_INTERRUPTS_BCIISR2 0x2 +#define TWL5031_INTERRUPTS_BCIIMR2 0x3 +#define TWL5031_INTERRUPTS_BCISIR 0x4 +#define TWL5031_INTERRUPTS_BCIEDR1 0x5 +#define TWL5031_INTERRUPTS_BCIEDR2 0x6 +#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 + +/*----------------------------------------------------------------------*/ + +/* Power bus message definitions */ + +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ + +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 /* Power references */ +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 /* All resource groups */ + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +/* Resource states */ +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +#define MSG_BROADCAST_ALL(devgrp, state) \ + ((devgrp) << 5 | (state)) + +#define MSG_BROADCAST_REF MSG_BROADCAST_ALL +#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL +#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL +/*----------------------------------------------------------------------*/ + +struct twl4030_clock_init_data { + bool ck32k_lowpwr_enable; +}; + +struct twl4030_bci_platform_data { + int *battery_tmp_tbl; + unsigned int tblsize; +}; + +/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ +struct twl4030_gpio_platform_data { + int gpio_base; + unsigned irq_base, irq_end; + + /* package the two LED signals as output-only GPIOs? */ + bool use_leds; + + /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ + u8 mmc_cd; + + /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ + u32 debounce; + + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup + * should be enabled. Else, if that bit is set in "pulldowns", + * that pulldown is enabled. Don't waste power by letting any + * digital inputs float... + */ + u32 pullups; + u32 pulldowns; + + int (*setup)(struct device *dev, + unsigned gpio, unsigned ngpio); + int (*teardown)(struct device *dev, + unsigned gpio, unsigned ngpio); +}; + +struct twl4030_madc_platform_data { + int irq_line; +}; + +/* Boards have uniqe mappings of {row, col} --> keycode. + * Column and row are 8 bits each, but range only from 0..7. + * a PERSISTENT_KEY is "always on" and never reported. + */ +#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED) + +struct twl4030_keypad_data { + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; +}; + +enum twl4030_usb_mode { + T2_USB_MODE_ULPI = 1, + T2_USB_MODE_CEA2011_3PIN = 2, +}; + +struct twl4030_usb_data { + enum twl4030_usb_mode usb_mode; +}; + +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ + u8 remap_off; /* off state remapping */ + u8 remap_sleep; /* sleep state remapping */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +#define TWL4030_RESCONFIG_UNDEF ((u8)-1) +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + +struct twl4030_codec_audio_data { + unsigned int audio_mclk; + unsigned int ramp_delay_value; + unsigned int hs_extmute:1; + void (*set_hs_extmute)(int mute); +}; + +struct twl4030_codec_vibra_data { + unsigned int audio_mclk; + unsigned int coexist; +}; + +struct twl4030_codec_data { + unsigned int audio_mclk; + struct twl4030_codec_audio_data *audio; + struct twl4030_codec_vibra_data *vibra; +}; + +struct twl4030_platform_data { + unsigned irq_base, irq_end; + struct twl4030_clock_init_data *clock; + struct twl4030_bci_platform_data *bci; + struct twl4030_gpio_platform_data *gpio; + struct twl4030_madc_platform_data *madc; + struct twl4030_keypad_data *keypad; + struct twl4030_usb_data *usb; + struct twl4030_power_data *power; + struct twl4030_codec_data *codec; + + /* Common LDO regulators for TWL4030/TWL6030 */ + struct regulator_init_data *vdac; + struct regulator_init_data *vaux1; + struct regulator_init_data *vaux2; + struct regulator_init_data *vaux3; + /* TWL4030 LDO regulators */ + struct regulator_init_data *vpll1; + struct regulator_init_data *vpll2; + struct regulator_init_data *vmmc1; + struct regulator_init_data *vmmc2; + struct regulator_init_data *vsim; + struct regulator_init_data *vaux4; + struct regulator_init_data *vio; + struct regulator_init_data *vdd1; + struct regulator_init_data *vdd2; + struct regulator_init_data *vintana1; + struct regulator_init_data *vintana2; + struct regulator_init_data *vintdig; + /* TWL6030 LDO regulators */ + struct regulator_init_data *vmmc; + struct regulator_init_data *vpp; + struct regulator_init_data *vusim; + struct regulator_init_data *vana; + struct regulator_init_data *vcxio; + struct regulator_init_data *vusb; +}; + +/*----------------------------------------------------------------------*/ + +int twl4030_sih_setup(int module); + +/* Offsets to Power Registers */ +#define TWL4030_VDAC_DEV_GRP 0x3B +#define TWL4030_VDAC_DEDICATED 0x3E +#define TWL4030_VAUX1_DEV_GRP 0x17 +#define TWL4030_VAUX1_DEDICATED 0x1A +#define TWL4030_VAUX2_DEV_GRP 0x1B +#define TWL4030_VAUX2_DEDICATED 0x1E +#define TWL4030_VAUX3_DEV_GRP 0x1F +#define TWL4030_VAUX3_DEDICATED 0x22 + +#if defined(CONFIG_TWL4030_BCI_BATTERY) || \ + defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) + extern int twl4030charger_usb_en(int enable); +#else + static inline int twl4030charger_usb_en(int enable) { return 0; } +#endif + +/*----------------------------------------------------------------------*/ + +/* Linux-specific regulator identifiers ... for now, we only support + * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 + * need to tie into hardware based voltage scaling (cpufreq etc), while + * VIO is generally fixed. + */ + +/* TWL4030 SMPS/LDO's */ +/* EXTERNAL dc-to-dc buck converters */ +#define TWL4030_REG_VDD1 0 +#define TWL4030_REG_VDD2 1 +#define TWL4030_REG_VIO 2 + +/* EXTERNAL LDOs */ +#define TWL4030_REG_VDAC 3 +#define TWL4030_REG_VPLL1 4 +#define TWL4030_REG_VPLL2 5 /* not on all chips */ +#define TWL4030_REG_VMMC1 6 +#define TWL4030_REG_VMMC2 7 /* not on all chips */ +#define TWL4030_REG_VSIM 8 /* not on all chips */ +#define TWL4030_REG_VAUX1 9 /* not on all chips */ +#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ +#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ +#define TWL4030_REG_VAUX3 12 /* not on all chips */ +#define TWL4030_REG_VAUX4 13 /* not on all chips */ + +/* INTERNAL LDOs */ +#define TWL4030_REG_VINTANA1 14 +#define TWL4030_REG_VINTANA2 15 +#define TWL4030_REG_VINTDIG 16 +#define TWL4030_REG_VUSB1V5 17 +#define TWL4030_REG_VUSB1V8 18 +#define TWL4030_REG_VUSB3V1 19 + +/* TWL6030 SMPS/LDO's */ +/* EXTERNAL dc-to-dc buck convertor contollable via SR */ +#define TWL6030_REG_VDD1 30 +#define TWL6030_REG_VDD2 31 +#define TWL6030_REG_VDD3 32 + +/* Non SR compliant dc-to-dc buck convertors */ +#define TWL6030_REG_VMEM 33 +#define TWL6030_REG_V2V1 34 +#define TWL6030_REG_V1V29 35 +#define TWL6030_REG_V1V8 36 + +/* EXTERNAL LDOs */ +#define TWL6030_REG_VAUX1_6030 37 +#define TWL6030_REG_VAUX2_6030 38 +#define TWL6030_REG_VAUX3_6030 39 +#define TWL6030_REG_VMMC 40 +#define TWL6030_REG_VPP 41 +#define TWL6030_REG_VUSIM 42 +#define TWL6030_REG_VANA 43 +#define TWL6030_REG_VCXIO 44 +#define TWL6030_REG_VDAC 45 +#define TWL6030_REG_VUSB 46 + +/* INTERNAL LDOs */ +#define TWL6030_REG_VRTC 47 + +#endif /* End of __TWL4030_H */ |