diff options
Diffstat (limited to 'include/linux/i2c.h')
| -rw-r--r-- | include/linux/i2c.h | 75 |
1 files changed, 38 insertions, 37 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9b5d047..71e50d3 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c.h - definitions for the i2c-bus interface */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl @@ -27,7 +27,7 @@ #define _LINUX_I2C_H #include <linux/types.h> -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include <linux/module.h> #include <linux/i2c-id.h> #include <linux/mod_devicetable.h> @@ -53,8 +53,8 @@ union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices - * on a bus (or read from them). Apart from two basic transfer functions to - * transmit one message at a time, a more complex version can be used to + * on a bus (or read from them). Apart from two basic transfer functions to + * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); @@ -67,10 +67,10 @@ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, - and probably just as fast. + and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, +extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -112,14 +112,14 @@ struct i2c_driver { /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it + * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it + /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. @@ -139,13 +139,13 @@ struct i2c_driver { #define I2C_NAME_SIZE 50 /* - * i2c_client identifies a single device (i.e. chip) that is connected to an + * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned short addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ @@ -182,14 +182,14 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) */ struct i2c_algorithm { /* If an adapter algorithm can't do I2C-level access, set master_xfer - to NULL. If an adapter algorithm can do SMBus access, set + to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, + int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); - int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, + int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -216,6 +216,7 @@ struct i2c_adapter { int (*client_unregister)(struct i2c_client *); /* data fields that are valid for all devices */ + u8 level; /* nesting level for lockdep */ struct mutex bus_lock; struct mutex clist_lock; @@ -316,7 +317,7 @@ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ -extern int i2c_probe(struct i2c_adapter *adapter, +extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); @@ -352,15 +353,15 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) */ struct i2c_msg { __u16 addr; /* slave address */ - __u16 flags; + __u16 flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 #define I2C_M_IGNORE_NAK 0x1000 #define I2C_M_NO_RD_ACK 0x0800 - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ @@ -370,16 +371,16 @@ struct i2c_msg { #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ @@ -406,10 +407,10 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ I2C_FUNC_SMBUS_I2C_BLOCK) -/* - * Data for SMBus Messages +/* + * Data for SMBus Messages */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ union i2c_smbus_data { __u8 byte; __u16 word; @@ -421,11 +422,11 @@ union i2c_smbus_data { #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -/* SMBus transaction types (size parameter in the above functions) +/* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 @@ -434,15 +435,15 @@ union i2c_smbus_data { /* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the + * note that additional calls are defined in the algorithm and hw + * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ + /* acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ |
